Large pile of walnut, all heartwood with no white wood good 4 sides in random lengths widths - 661 board feet, moisture content 8.5%, 3/4 inch
1-1/2 inch Red Oak purchased from Quincey, Illinois in 2000, 11 boards 9 ft.+ x 10 inches and 6 short boards, total 106.5 board feet. Moisture 8.5 to 9%
White Ash 3/4 inch thick good 3 sides with moisture of 9%, total 500 board feet
Red cedar with moisture of 8%, totaling 510 board feet with 92 boards finishing at 9 ft. long and 4.5 inches wide, rough sawn 15/16 inches thick. Harvested on site in 2010.
Small amount of Butternut, 22.5 board feet, 3/4 inch thick and 9 foot long good 3 sides, 9% moisture
Walnut 1-1/2 inches thick with 3 sides good and moisture at 9%, 440 board feet
Curly Maple purchased from Paxton Lumber in KCMO about 20 years ago, good 4 sides at 3/4 inch thick and moisture of 8.5%, 48 board feet
3/4 inch walnut good 3 sides with moisture of 8.5%, pile totaling 720 board feet
Pile of white oak totaling 360 board feet, moisture of 9.5%, good 3 sides, random widths with lengths of 9 ft. 6 inches finished
15 short pieces of walnut all heartwood, 1-1/2 inches thick, about 54 board feet with moisture of 9%
Native maple with all boards finishing out at 5 ft. 6 inches long, needs planed to 3/4 inch, several wide boards, moisture of 9%, approx. 120 board feet
Walnut 4x4's - full 4 inches, 16 that finish out at 8+ feet long, 1 at 6 ft. 10 inches and 1 short 4 ft. 2 inches. All heartwood with moisture content of 9%
RBI Model 820 or 20 inch planer with 2 new sets of blades, sanding drum attachment with 4 rolls sandpaper, gang saw attachment, new belt, variable speed automatic feed attachment and 5 HP motor
Makita 10 inch compound miter saw works great
Nice roll around cabinet with 2 shelves
Craftsman Oscillating spindle sander with 20 assorted sanding sleeves, less table
Craftsman 2 inch x 42 inch belt and 8 inch disc sander with new belts and discs, less table
Craftsman Model 102 6 inch jointer with 1 set of new blades, includes stand, made about 1948, works great
11 board feet of SPALTED BUTTERNUT, 2 INCH THICK BY 9 FT. LONG, 7% MOISTURE, HARVESTED ABOUT 600 FEET FROM WHERE IT IS DISPLAYED
2 Vintage pitch forks - 1 four prong and 1 three prong, purchased from Scarcliff Hardware in Holden, Mo. 1950
6 shelf really nice cabinet with doors and a 15 cubby hole cabinet included
Vintage sled in good condition from the 1950's, seller used it personally
Heston and Anderson wood lathe made about 1946, modified to turn up to 11 inch stock, variable speed by belt and pulley, 2 sets of turning tools with wood bench included
Dewalt DW672 offset trim router
Milwaukee Magnum hammer drill 1/2 inch, new never used
2 Sanders, 1 Skill mod. 490 and Dewalt DW 412
Craftsman Industrial plunge router 3-1/2 HP with 1/4 and 1/2 inch collets
New, never used Porter Cable router Model 6902, 1/4 inch and 1/2 inch collets
Craftsman Commercial router with case and guide
Delta Jigsaw
Craftsman Model 315 3/8 inch drill
Rotozip Spiral saw with several pkgs. of new cutters
Servis 1/2 inch electric drill, single speed
2 Bosch Corner sanders Model B7000 with a pail of new sanding discs
Bosch Pneumatic stapler Model S32sx 1/2 inch - 1-3/8 inch
Craftsman variable speed scroller saw works great
Dewalt orbital sander Model DWE6421
2 Pneumatic brad nailers Models BT50B and Model BT35B
Columbia Model 9650 6 inch bench grinder 1/2 HP
Stanley Bostitch Framing nailer pneumatic, uses 2 inch thru 3 inch nails
Power Kraft JIG SAW works fine
Porter Cable Model 511 Cylinder lock boring kit, brand new never used with case
Brand new SCHLAGE Model 40-056 Boring Jig kit, never used with case
Ethan Allen table with 2 benches (1 bench stripped), good shape purchased new
Dewalt Model DW 317 Jig Saw, only used a few times
Porter Cable cutout tool with new bits
Porter Cable finish trim saw
Bostitch Pneumatic Trim Nailer Model N60FN great shape
Ryobi Laminate trim router Model TR 30U
Model 77 - 7-1/4 inch geared skill saw
Porter Cable orbital sander Model 333 with box and new pad
Model 77 - 7-1/4 inch skill saw
Dewalt Model DW471 7 inch grinder
Makita 3 inch belt sander, box and 2 boxes of belts
Porter Cable 333 orbital sander, box, new pad and new pad screws
Bosch Model B7250 orbital sander
FEIN Model 9.55.13 1000 watt auxiliary tool control Vacuum with box of new bags, lets you run wood tools inside without dust
Dorm size refrigerator, works great, been plugged in for about 2 months
Purple Heart wood 10-3/4 inch wide x 8-1/2 feet long x 3/4 inch, 9% moisture, 7+ board feet
Pecky Cypress 1 inch thick, 6% moisture, 8.33 board feet
Marshalltown 12 inch laminate floor cutter, works great
7-1/4 inch skill saw Model 574 works great
Ryobi Variable speed Mini Lathe, turns stock up to 18 inch long
Wilton 4 inch bench vise, like new
Craftsman 20 inch scroll saw, blades in compartment on saw, Contractor Grade
Black and Decker Workmate Model 400 good condition
Craftsman 6 inch belt sander made about 1948, with belt and several 8 inch discs, works great
3 adjustable floor standing rollers for catching material from planers, table saws etc.
Craftsman 12 inch Band saw with 12 new blades, purchased new about 1979
7 Vintage yard sticks
Seymore bush Scythe with a RIXFORD blade, about 90% of its metal remaining, most of its original red paint, made about 1949
Skilsaw 10 inch portable compound table saw
Craftsman Compound table saw made about 1950, very smooth, table tilts for angles, runs like new
4 antique Singer sewing machine side drawers, great shape with finger handles and decorative designs, 13 inches long x 3 inches deep x 4 inches wide
Bostitch Oil less compressor 2 HP Model CWC200 WT
6 vintage hand saws with fair condition, most are Disston
Baldwin Model 7 Polished stainless steel door pulls, 5 total, 4 inches wide and 16 inches long
Antique hand forged Hay hook and pry bar, trowel, garden tool and wood chisel
3 Baldwin brass door pulls + 6 Baldwin brass door push plates all new
Antique wooden pulley, double iron pulley, metal window scraper, wooden mallet
Antique 2 hand forged clevises, Saw set tool, and antique 1920's spark plug sockets
Weed Brand Horseshoe pulling tool 1913, Hoof trimmers, spring loaded trimmers, and a vintage set of UTICA Cyclone fence pliers
2 vintage drill braces
2 vintage hand sickles
Vintage AX heads and 1 vintage ax with modern handle
Vintage Diamond forged Monkey wrench, 1 pair of horse hair shears, large tin snips and 1 pair of offset pruners all vintage
Craftsman 1950 made 1/2 inch bench drill press with floor stand, drill bits, cutting oil
12 inch miter saw blades some new and some sharp
5 new 10 inch saw blades
5 new 10 inch miter saw blades with 17 blades some dull some sharp, even some 8 inch
Antique Disston large miter saw with strong back for riding in a jig
12 vise grip wood clamps various lengths and 2 hand clamps
Antique copper head soldering irons, very rare, really hold the heat, great shape
New FELKER 10 inch Diamond blade for cutting stone, granite etc.
11 new 7-1/4 inch skill saw blades
5 new packages of various grit sandpaper
Roll around cabinet with 48 cubby holes and 1 open top shelf
Craftsman shaper with 26 various cutter heads, complete new spindle assembly included, great for small wood shop
Craftsman Router table with a 1/2 HP craftsman router attached, laminated extensions on both ends
Craftsman digital Plunge router 1/4 inch and 1/2 inch collets, brand new in sealed box, purchased about 25 years ago as a spare
FREUD DADO cutter 8 inch - 1/4 inch thru 13/16 range, cuts smooth
Craftsman fixed base router with 1/4 and 1/2 inch collets, new still in sealed box
Another new old Craftsman router, same specs as lot 102
Makita 3 inch portable planer with guide and case
Craftsman Multipurpose fence guide system and 2 straight line guides to rip crooked lumber, all brand new never opened
4 brand new boxes of 1-1/2 inch sand paper, 80-120-240 & 320 grit, 50 yds per box
Porter Cable Plate jointer with 4 containers of biscuits, used only one time
4 vintage Disston hand saws, 1 newer Disston about 30 years old
1 full box of cedar planking and 18 separate cedar planking new pieces
Wood Tek floor mounted drill press, variable speed, 1/2 inch chuck, with 4 Rosette cutters, 1/2 inch drill index and cutting oil, purchased new in 2007
18 boxes of 3 inch sanding belts, various grits, Porter Cable
4 - 36 inch Jorgensen wood clamps and 1 Pony 1/2 inch pipe clamp
Various router attachments and 8 corner and straight frame clamps
1 new 16 piece set of DIABLO SPEEDMON spade bit set
4 combination squares and 2 additional squares
1 Dowel Jig tool, 2 small levels, 3 Yankee screwdrivers - 2 small and 1 rare large one, all work fine
1 RABONE angle square, 16 inch square, 12 inch square, and a RABONE Wood and brass adjustable inlay Chesterman mortise marking gauge - both Rabones vintage and like new
5 C clamps and 2 quick set clamps
1 antique CHATILIONS IMPROVED SPRING BALANCE 50 LB. SCALE, 1 antique valve lockable compression tool and 1 valve grinding tool with a valve set tool
1 Craftsman vintage Molding head new in the box, 1 vintage Drillsaw kit, and 1 new set of FMT 1/4 inch to 1 inch countersink set - brand new
Coping saw and 2 Disston trim saws, 1 is offset for flush cutting in the case
Craftsman router circle cutting jig
Vintage Stanley Brace and a 10 piece set of auger bits
1/4 - 1/2 inch drill bits all great shape with most made by Silver and Deming 1/2 shank
4 vintage large layout squares, layout rafters, stairs, and ridges all very legible
3 Wiss tin snips + 5 assorted sizes of vise grips
12 inch to 4 inch adjustable wrenches - 10 total
3 tin snips and 1 set of 3/8 extensions
Set of Barcalo Buffalo wrenches size 9/16 to 1-1/4 and also 1 - 3/8 inch wrench, purchased from a traveling salesman from New York in 1952 in Cass County, Mo.
8 wood chisels, 4 on the left came from a Western Auto store in Holden, MO. in the early 1950's
Cool vintage wrenches with names such as Herbrand, Fordson, 12 in total, collectors dream
12 more wrenches, several manufacturers
19 Antique wrenches, all open end
5 more specialty wrenches
4 modern Stanley block planes
1 Miller Falls Plane 9 inch vintage
1 Trimont 18 inch pipe wrench from the 1940's, 1 antique Monkey wrench and 1 unknown wrench
1 - 13-1/2 inch Bailey plane, good condition vintage
1 Vintage Victor 12-1/2 inch plane, great shape
1 Bull nose clamp with lead rope, Cowbell with neck strap used on a Hereford named Clarabell in the late 1940's, 1 pill pusher, 1 set of kick chains
Block and Stone chipping hammer & a Plumb vintage brick hammer
3 vintage Lufkin 6 ft. folding rulers, 1 Evans white clad 50 ft. steel tape, vintage
1 antique cleaver, Antique log hewing large chisel, 1 chisel
2 sets of Ice tongs used to load grandmother's ice box in Independence, MO. in late 1940's and 50's
2 meat saws, 1 Disston and 1 Sheffield, used many times to split beef and hogs and quarter them
1 hand brace and 1 shoulder brace, both vintage
Craftsman Mortise and Tenon fixture never used from the 1960's
Craftsman Deluxe Dovetail fixture never used from late 1960's
Compound Radial saw, 2-3/4 HP, 10 inch with stand
1970's Craftsman 12 inch planer with 1 new set of blades, wood stand included
3 Tool boxes with trays
Wood Tek Shaper, 3 HP, flip a switch for reverse, sliding rear table with laminated extensions, 40 shaper bits and router bits, style and rail cutters and 12 various bushings, purchased new in 2007
Craftsman 6 inch grinder with floor stand
3 HP 6 inch Sawdust Collection system, 220 volt, with push button switch
Jorgensen 4x7 wood vise with quick release, needs removed from bench
Jorgensen 4x10 wood vise with quick release, screwed to bench
2 Meat hooks used to hang meat for cooling in the 1940's and 50's
40 pounds of 9x3 and 10x3 and 10x3-1/2 inch wood screws plus several boxes of other screws, all new in boxes of 100
300 new Tapcon screws with bits and driver, 18 boxes of various sheet metal screws and wood screws, all brand new
9 boxes of 75 sheet metal screws and 8 kits of screws, spring pins and more, all new
3 new rolls of Caution tape, Electric underground tape, and water line below tape, 1 new package of Frog tape 2 inch, 4 - 2 inch duck tape rolls
6 new boxes of Hillman 6 inch gutter screws and spacers
Real Govt. Surplus ammo cans like new, 5.56 and 30 cal. cans
1 case of 12 hand sanitizer, 3 tubs of lubricated hand towels, 1 large bottle of Orange cleaner
3 gallons of WD-40, 4 gals of WD-40 rust remover, all new and never opened
6 dozen safety glasses, clear and smoke, and 400 pair of new ear plugs
6 bottle jacks, 2 scissor jacks
1 Gundalach 12 inch VCT tile cutter with rollers for easy moving
Stihl 044 chain saw with 30 inch bar and a new 36 inch bar with chains, runs great
Stihl 029 chain saw with 20 inch bar, new chains (dull and sharp), runs great
Echo 12 chain saw and Poulan S25 AV chain saw, both were running great, comes with a few chains
Stihl AHS 80 leaf blower, works fine
5 plastic gas cans
Stihl MS194T 12 chain saw, used only 2 times, like new, bought in 2023
12 Wood boring bits, mostly Milwaukee
Stihl HS80 shrub trimmer, runs great
5 full gallons of Stihl bar oil and 3 new six packs of gas mixture for Stihls
Pex crimping tool in case, used only 1 time
27 hole saws with adapters and arbors, includes tool box, 1 inch to 6 inch
Greenlee 7 piece set of wood boring bits in case, set of Lenox hole saws
Dayton Electric soldering gun and Milwaukee variable speed 3/8 inch drill
20 - 18 inch auger bits, from 1/2 inch to 1-1/4 inch, several are new with tool box
4 new sets of Tapcon kits
1 MC Acetylene tank and turbo torch kit with tool box + 1 new 12 inch turbo hose and several sizes of tips and soldering iron
1 new fiberglass deep sink with legs and new faucet with box included
5 plastic gas cans
5 plastic gas cans
120 Fernco couplings sizes 1-1/2 inch through 6 inch, all like new, also 95 shielded couplings 1-1/2 inch to 4 inch all like new with clamps
5 rubber test balls and a few ADS couplings
4 swivel sheet rock sanding poles, 1 hand sander and 4 mud pans, 1 spud, 1 electric drill mixer and 5 pkgs of sanding screen
1 Ridgid 2-1/2 thru 4 inch geared threader, Model 4PJ, almost new teeth, with Ridgid Flex drive shaft
1 Dewalt sheet rock screw gun
Milwaukee Sawzall and case
1 Milwaukee 1/2 inch right angle drill and case
Makita 12 inch chop saw with 6 new blades
Olympyk 14 inch quickie saw with 16 new blades for steel, stone and concrete
Milwaukee 1/2 inch drill and hammer drill w/case
Milwaukee 1/2 inch drill and hammer drill w/case
Remington Model 400 power tool w/case and hundreds of nails and loads
Milwaukee 4 inch grinder
Milwaukee 1-1/2 inch hammer drill with full set of bits + 1 - 2 inch core bit
Mystery tub of goodies, take a gamble
Greenlee MC cable dispenser, works great and no more tangles
Tote packed full of painting supplies, several Purdy brushes (new and used), pans, and lots of other tools
Mystery tub
3 plastic kerosene cans and 2 gas cans
Milwaukee deep cut Band Saw with case and 36+ new blades
Makita 3 inch grinder with new discs and case
Milwaukee Sawzall w/case
Milwaukee 4-1/2 inch grinder
Makita 7 inch grinder
1 Portable air bubble
1 Portable air bubble
1 - 4 ft. manhole cone bar and 1 barrel bar for 4 ft. manholes, 6 ft. cable choker, with 3 new web chokers still in package
Ridgid 400 A threader with Ridgid oiler and 2 gallons of cutting oil
Ridgid Model 450 chain vise for up to 5 inch pipe, like new
Coleman power mate 1000 watt generator
Wisconsin 1-1/2 inch water pump with 25 feet of suction and 25 feet of discharge hose
Makita 10 inch miter saw
Dewalt hole hog drill right angle w/case
GE 3 pole 60 amp safety switch fusible, 2 Eaton 2 pole 100 amp safety switches fusible, 1 - 1/4 HP Dayton electric fan motor, all new
2 Cutler Hammer 30 amp Double throw transfer switches new, 1 Milbank 3R RT enclosure with cover and 5 bottles of pulling lube
13 rolls of Scotch 88 tape, several rolls of Scotch 33 tape, 2 boxes 2200 mastic pads, hundreds of yellow and red wire nuts, several Westinghouse double pole breakers, 3 - 70 amp main lug disconnects,
1 case of 175 watt dusk to dawn bulbs, 2 Tripp Lite power bars, 1 case of Satco 120 volt 9.5 watt LED bulbs, 1 case of Satco 15 watt LED bulbs medium base, 2 - 125 amp main lug disconnects + more
1 Hydraulic Oil pressure pump and 3/4 inch punch for steel, 2500 PSI
Ridgid 12R threader with 1/2 inch thru 2 inch dies
11R Ridgid threader with 3/8 thru 1-1/4 inch dies
Ridgid 36 inch aluminum pipe wrench
Ridgid model 4-8 2 inch to 4 inch heavy duty pipe cutter
36 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
Tyler 20 inch electric wire cutter for copper and aluminum up to 4/0
30 inch Greenlee electric wire cutter for up to 500 MCM copper and aluminum
3 - 3/8 inch load binders and 3 - 5/16 load binders
1 new and 1 used Ridgid drop head toilet augers
3 long cable drill bits, 6 ft., 54 inch, and 24 inch
2 Ridgid 2 inch pipe cutters
1 RIDGID 4 wheel pipe cutter for where there is very little room to cut pipe
10 fuse pullers, from 200 amp to 12 volt mini fuses
Ridgid inside pipe cutter, from 2 inch to 4 inch
2 Ridgid tubing cutters up to 2 inch and 1 Ridgid ratcheting tubing cutter to 1 inch
1 Ridgid plastic pipe cutter, 1 - 2 inch tubing cutter and 1 - 1 inch tubing cutter Ridgid
3 Flare tools - 1 real nice Ridgid and 2 others
2 Ridgid 24 inch pipe wrenches, 1 aluminum 18 inch pipe wrench
1 Diamond chain wrench, 1 Fuller 24 inch aluminum pipe wrench, 4 other pipe wrenches
3 Ridgid pipe wrenches and 1 auto adjust
4 - 1-1/8 inch to 1/8 inch tubing cutters
1 grappling hook, 2 new mole traps, 1 after market havens grip, and 2 very rare real Havens grips 2 sizes
2 cable jacks with 1 set up with 2 pulleys
2 cable jacks and 1 ratcheting fence stretcher
15 plastic pipe saws with 5 new
2 pneumatic paint pots, 1 Develbiss and 1 NAPA
Lots of grinding discs and cutting discs, 7 inch, 4-1/2 inch, 4 inch, 3 inch +++ with most of the 7 and 7-1/2 inch tapped 5/8 inch
GMC grill for a 2007 Envoy, in great condition
22 piece box end and open end set of wrenches, AIGO brand, used these wrenches for over 60 years
4 EMT conduit benders 1/2 inch to 1 inch
10 pad locks and keys with 4 that can't be cut with bolt cutters
2 fiberglass grade sticks, both 25 feet, 1 in 10ths and 1 in inches
10 flexible gas connectors in various lengths
2 liquid transfer pumps, 3 gals per stroke
20+ Kellems in almost every size
15 piece wrench set, AIGO brand, owned for over 60 years
6 piece set of adjustable wrenches 24 inch thru 6 inch, all name brand
10 Klein Leather pouches of various sizes, all new
3 sets of jumper cables with 1 set 25 foot made out of #4 stranded copper
1 Rust-Oleum Stripe painting machine with 4 cans of paint
1 - 24 inch floor standing fan with a new Dayton motor installed last winter
Several hundred pounds of steel - 1x3x1/4 inch tubing, 1 inch steel pipe, 2x2x1/4 angle, 2x2x1/8 inch angle, 40 feet of 2x2x1/4 tubing, several feet of flat iron x 1/4 inch thick. About 500 lineal fee
2 new tank sprayers both still in the box
1 partial case of Tefla Lube, 8 cans in all
1 case of 6 tubs of Rid O Grime wipes
1 case of 12 Tefla Pent (works better than liquid wrench)
1 - 500 foot roll of #10 THHN stranded wire and 1 - 500 foot roll of #10 THHN stranded wire, both new rolls
1 case of 12 Rid-O-Grime abrasive soap
1 case of 12 Master blaster
1 case of 12 Rid-O-Grime
Another case of 12 Rid-O-Grime
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
2 brand new leather welding protectors - 1 shoulder and arms and 1 leather welding apron, very good soft leather
3 Pneumatic Pressure regulators with oilers
Dozens of Die grinder attachments, all for 1/4 inch die grinders
3 Air tools - 1 3/8 ratchet, 1 butterfly 3/8 inch impact wrench and 1 NAPA 1/2 inch impact wrench
Dayton Electric impact wrench with case and 6 sockets
1 Right angle 1/4 inch die grinder (new), 1 used straight 1/4 inch die grinder and 1 pneumatic weld descaler (never used)
Several sets of impact sockets with 2 sets of deep and tray
3 new plastic parts bins, provides lots of storage
1 Generac High pressure 3000 PSI power sprayer with 6 various tips, 5 HP Honda gas engine
Fastenal Bolt bin with bolts, sizes 1/4 inch to 5/8 inch in all lengths from 1 inch to 3 inch, grade 5 coarse thread, with nuts, flat and lock washers, several hundred pounds plus 3 cubby holes of 1/2
1 Stringer safety pole belt with 2 lanyards
1 Oxygen cylinder
1 Acetylene cylinder
Lincoln wire welder Model 170-T with cart and regulator, hose and tank for MIG welding, several rolls of solid wire and flux wire, 220 volt, uses a double pole 20 amp breaker. Also has 25 ft. extra 10
10 new cans of Flex-Seal
5 good pair of welding gloves and 2 new pair, welding goggles, and welding glasses
2 nice half face 3M masks with gas and organic vapor cartridges, all new, never used
1 new 250 foot spool of 3/8 inch twisted rope, 50 foot of 3/8 inch nylon rope, 1 - 100 ft. new 3/8 inch twisted rope and 50 foot of 1/4 inch nylon rope, all brand new
10 piece new set of soft finish WIHA screwdrivers
14 piece set of new WIHA Insulated Screwdrivers
Vintage orange handled SNAP ON Screwdrivers purchased in 1990 from Snap On truck in Canton, Mo., also includes a rare SNAP ON 18 inch pry bar
2 ratcheting SNAP ON screwdrivers with bits in handle, purchased 1990, rare find
2 rare SNAP ON screwdrivers with pistol grip color
3 Partsmaster ratchets 1/4, 3/8 and 1/2 inch, all extendable, new
32 piece 1/4 inch socket set, purchased from SNAP ON truck in Lee's Summit, Mo. in 1968
Another new set of Partsmaster ratchets extendable 1/4, 3/8, and 1/2 inch
Great vintage SNAP ON tools set - 38 bits, 10 piece 1/4 inch socket set, 4 long bits, with case and ratcheting screwdriver
Possibly the best made set of various pliers by KNIPEX
WIHA new tools set - set of security bits with case and ratcheting handle (36 bits), 1 set of miniature nut drivers, 8 piece set of precision hex drivers and set of 8 precision Torx drivers, all new a
Set of ratcheting electric wire cutters, Model B97-1383, cuts up to 250 MCM copper or aluminum, Klein tool
1 set of WIHA nut drivers all brand new, 11 piece set
2 very rare items - 1 vintage set of blue SNAP ON picks with plastic case bought in 1969 (never used) and 1 rare set of miniature WERA T handled Torx drivers made in Czech Republic
1 - 8 piece set of new insulated Allen wrenches 1/8 inch to 1/2 inch, by WIHA
1 - 10 piece set of KLEIN Journeyman Hex key wrenches with both T handled and 90 degree Allens, 1/8 to 3/8 but includes 1/2 inch also, with steel stand
Same as lot 320 - KLEIN Journeyman Hex key wrenches set
1 new 44 piece set of 1/4 inch sockets and tools with case, Westward brand
5 individual items - Gear wrench mini screwdrivers, Brownell miniature screwdriver set in wooden box, Craftsman Calipers, Irwin bolt extractors, Century bolt extractors
Craftsman collectors - Vintage miniature tool set in a nice leather case, new
Dewalt new set of bits, nut drivers, drill bits, 1/4 inch extensions
New Gear Wrench reversible ratcheting nut drivers with handle
New in the box KRIEGER 2000 watt inverter, clamp to 12 volt battery to get 110V
4 tools, all new but most vintage - Pop rivet gun and rivets, Klein Screwdrivers, Craftsman 1/4 inch socket set, Hitachi 40 piece bit set
6 new Gear Wrench long needle nose pliers, hinged centers
Westward new set of 1/2 inch socket set in Metric
Set of Continental used tap and die set, a very unusual and large set
New set of Irwin tap and die set, with 2 separate die handles
Unusual set of bits by IFIXIT new, Minature tool set, new Stanley 25 ft. tape
New Rock River mini screwdrivers, 9 new 3/8 inch drive hex bit set, and a rare Craftsman drill bit set with all bit sizes 1-60 in a self positioning case
General ratchet bit set, Vintage Stanley 100 ft. steel tape, Vintage White Clad 100 ft. tape, Klein strippers, and a rare set of SNAP ON pipe extractors
Set of Orifice drill bits with case, 1 set of Ridgid Pipe extractors (vintage), 1 very rare mini drill bit index and an Irwin bit set (new)
WIHA bit set - anti static, new and 2 new Irwin multi bit sets with a bit set
New Amazon Basic tool set, 151 piece, also 1 new HK Porter wire rope and cable cutter, new Lenox step bit
Century tap and die set (used), Mechanics plier set, 1 HUOT tap and drill set
Tap and die set used, New HUOT tap and drill index and new Westward tool set
Test equipment lot - capacitor tester, gas leak tester, 6-way voltage meter, wire tone tester up to 1000 feet, amperage tester, polarity tester, gas pressure tester and more. All tested and work fine.
New Jobber drill bit set up to 1/2 inch, Very rare Starrett punch set in wooden case
New Irwin bit set, 2 Lenox new step bits, new General miniature screwdrivers
New Westward mini pliers, 1 new Klein mini bit set, 1 set of screw extractors
New Dewalt 1/4 inch socket set and new set of 3/8 drive hex bit set in cases
1 new Lenox fat boy torch set in case, purchased about 2008, Pristine
New Dremel drill set with case and 1 new Dremel accessory kit
Rare Mini tool set in leather case - new but a little rust on some tools, case faded, Vintage Craftsman
New Westward 172 piece bit set, Dewalt
6 various hand tools with 2 new Dewalt ratchets 1/2 and 1/4 inch
New in cases Dewalt 1/4 inch socket set with 1 new set of 1/4 inch deep sockets
New Lincoln battery powered grease gun with case, never used
Rare socket set by WILLIAMS - bolt thru set, brand new with case
Snap On collectors - purchased 1990 screwdriver set, plus a bonus 1 vintage Snap On 7/16 inch wrench
2 New Makita tool sets with cases
1 Craftsman vintage socket set, also a vintage SK Wayne socket set with a Craftsman ratchet size 3/8
Blackburn Model OD Wire splicing tool with several boxes of crimps and sleeves, with all 3 dies attached, insulated handles
Nicopress compression tool + 2 boxes of crimps
Nicopress compression tool + 2 boxes of crimps - crimps are stronger than the actual wire, great for splicing barb wire and woven wire
New Fluke 333 Clamp electric meter
New Fluke 333 Clamp electric meter
New Ideal Electric clamp on meter with case
New Fluke 323 clamp on meter
New Klein CL800 clamp on meter
New Fluke 373 clamp meter
2 sets of 2 new Dewalt 12 foot ratchet straps
1 new Klein needle nose pliers, new set of Klein insulated screwdrivers with case, and a new set of drills
1 set of rubber insulated to 1000 volt gloves, made in 2021, used only 1 time, comes with all three layers and bag, size 9 by National Safety
6 pair of assorted Gear wrench long pliers
7 various pliers and tools, all high end
9 Chalk lines with one new
9 new Dewalt various bit sets, all pristine
2 sets of Greenlee Punch sets in leather cases, brand new in the box, 1/2 inch thru 2 inch
3 Greenlee punch sets that have been used, 1/2 inch thru 2 inch
4 Milwaukee bit and drill set kits new
3 Milwaukee new bit and driver sets
New Gear wrench Ratcheting nut driver set metric and SAE
3 new Milwaukee bit sets and 1 used drill bit set
4 new Milwaukee bit and nut driver sets
3 new Milwaukee bit sets
3 new Milwaukee bit sets
2 new Milwaukee bit sets and 1 new Milwaukee drill bit set
2 vintage Craftsman 1/4 inch socket sets, Metric and SAE + 18 individual wrenches several vintage, with some Williams
10 SDS masonry drill bits, 9 new and 1 used, by Dewalt
5 new 5 gallon potable water jugs, never opened
60 ft. of 1/2 inch O.D. copper
49 ft. of 5/8 O.D. L copper
Used Rebar bender and cutter, works great for small bending projects
3 brand new 25 ft. trouble lights
100 ft. of 5/8 O.D. K copper
42 ft. of 3/4 inch I.D. K copper
2 lug wrenches, 1 for small lug bolts and 1 for heavy truck, along with 5 various tire tools and 2 peewee lug wrenches
10 Drawer Map cabinet with ball bearing drawers, lined drawers, screwed to wall
1000 zip ties from 4 inch to 18 inch, 10 pkgs never opened
5 various basin wrenches and lengths, 1 spud wrench and 2 seat wrenches
New 8K piece Heavy duty screwdriver set by Partsmaster
2 new in the box ISOBAR Tripp Lite power bars with 3840 Joules surge protection
4 various pipe wrenches and 1 Ridgid 18 inch offset pipe wrench
5 - 6 inch thru 15 inch adjustable wrench set
2 JCM ratchet wrenches and 11 other wrenches
5 vintage adjustable pliers, work really well
1 small HK Porter bolt cutter, 2 claw hammers (Stanley and Estwing) and a man hole pry bar by PROTO
9 assorted pliers and vise grips, all good condition
14 scissors with 2 new tire plug punches and kits both new in blister packs
4 strikers, 3 wire brushes all new, flat bar
1 - 24 inch ball pein hammer, claw hammer, plastic mallet and 1 hatchet
6 assorted pump pliers
8 various hand garden tools
2 - 4 ft. empire levels, 1 - 3 ft. level and 1 hacksaw
1 set of new Gear wrench combo wrenches, 1 used set of Craftsman nut drivers, 2 new Stanley 25 ft. tapes
New set of 10 Partsmasters screwdrivers, 1 Klein new cutters and 1 new set of Rock River nut drivers
1 new set of 5/16 to 15/16 wrenches Westward, 1 new 25 ft. Stanley tape
New Bostitch hex drivers, 1 Klein ratcheting bit set, 5 piece set of Klein screw holders in case, and set of Stanley tools
New Westward nut driver set, and a new Gear wrench combo set
Best made tool set by XCELITE - a service master set
8 various tools - tin snips, hoof trimmers, and tile nibbler
Set of ARMSTRONG offset wrenches (3/8 to 3/4) and a new set of EKLIND ball hex key tools
Rare screwdriver set by Felo Rgonic made in Germany with case, highly rated as high end
6 Wiss sheet metal tools - snips, crimpers, circle cutters etc.
2 hacksaws, 2 coping saws, and 1 miter saw
5 bow saws with 8 new blades
New set of Ideal nut drivers, and a new set of Gear wrench combos SAE
2 new sets of Crescent wrenches with ratcheting base and sockets
New set of Bondhus ball hex drivers, Craftsman bit set, 3 shorty craftsman box end wrenches and 2 distributor wrenches
Large lot of Vintage car buffs tools - Ring compressor, compression tester, feeler gauges, spark plug gap tools and more
New Craftsman box end set 1/4 inch drive set, drill gauges and squares
1 set of Craftsman Tappet wrenches, 4 adjustable wrenches, 1 Craftsman mini screwdriver set
1 Vintage Sunex metric wrenches with case - 14 piece, only used rarely
New Craftsman 6 piece quick wrenches and a new set of extended reach quick wrenches by Craftsman
2 new Craftsman wrench sets, Ratcheting Craftsman wrenches, 4 piece set of Power Torque wrenches (each wrench fitting 3 different size nuts), all vintage
7 new sets of economical tools
11 new sets of various economical tools with 3 new rolls of duck tape and 1 partial roll of white duck tape
Diamond chain wrench, strap wrench, Ridgid meter wrench, Dewalt knife and 1 Irwin auto pipe wrench
6 tapes, 2 large rasps, 6 wrenches
4 new Mapp gas cylinders with a new auto light torch all new
4 new Mapp gas cylinders with a new auto light torch all new
6 Ridgid flare tools 3/4 inch to 2 inch and 2 plastic tubing cutters
8 adjustable pliers, 1 MC Cable cutter with 3 new wheels, 1 set of Allen wrenches
6 new tapes and 100 zip ties
4 - 9 inch torpedo levels, 1 new Stanley Fat Max torpedo level, 2 post levels
8 new rolls of tie wire
5 new 8 inch adjustable wrenches, 6 adjustable 6 inch wrenches, 1 Craftsman stud remover, 5 piece set of 8 point sockets with 1/2 inch drive for square nuts
3 new Potable water jugs never opened
Mystery tote full of goodies
Gold Foundry winch with 50 ft. of 3/8 cable and hook, 2 speed, purchased from the foundry in Independence, Mo. in 1990
1 bucket full of invert floats, trowels, and lots of concrete tools
2 antique Coal Oil cans (1 has no bottom), and 1 Mobil vintage metal gas can
2 toe lift sheetrock tools, and 4 sheetrock key hole saws
3 Gear Wrench adjustable pry bars, never used
1 Ford tapping tool fits 3/4 inch flare and compression corps and also 1 inch flare or compression corps
1 new in the box Pristine copper jumper cables
1 Vintage Magnavox Model 1500 receiver and 1 vintage Magnavox 8 Track recorder, both power up fine, purchased at Bob Johnson appliance in Harrisonville, Mo. in the 1980's
True Craft 3/4 inch socket set, 7/8 thru 2-1/4 inch, complete set with extras, used over 60 years, several extensions in original metal case
225 amp AC DC welder with 100 ft. of stinger and 100 ft. of ground, welds nice and smooth
MC Acetylene Air gas bottle with turbo torch and various tips and soldering iron
1 Kirk Welding Supply Oxygen bottle
Air Gas AC-B Acetylene tank
Air Gas AC-B Acetylene tank with a Turbo Torch attached
3 welding helmets - 2 with large lens and 1 regular lens & 2 headgear for shields
1 Acetylene tank AC-B size
About 75 lbs. of welding rod - 180 fleetweld, 7018 in 1/8 and 5/32, stored in controlled environment, coatings all solid, most still in original packages
11 used welding magnets and 9 new welding magnets
1 Earthway seed or fertilizer spreader with tongue, used one time, like new
All brand new items - wire brushes, chipping hammers, strikers, flints, marking chalk pencils, and 1 new welding stinger
8 C clamps, 18 Vise Grip brand welding clamps
Air Gas tank for MIG welding gas
Torch set up with Air gas tanks, 50 ft. of hose, 2 Harris torches, extra cutting tips and brazing tips, and cart - ready to work
1 - 22 inch floor standing fan with new motor installed last winter
New shooting bench with 1 inch top, built on the frame of a folding sawhorse
1 Solar battery charger with boost, works fine, has 2 knobs missing
1 Lawn Boy 150,000 BTU Salamander heater, always burnt kerosene, works fine
Partsmaster Stubby Ratchets - Set of 2
Assorted Garden Tools
2 large used welding jackets, no burn holes, really great quality jackets
Misc spray Paint and other assorted aerosol cans
Delta 12 inch Compound Miter saw, great condition
Barrel full of shovels, rakes, scoops, pick and more (holes in barrel)
Plastic barrel full of tools - shovels, hoes, pick, car wash brushes and more (holes in bottom of barrel)
Custom built 6 target plate rack system with 6 - 8 inch collapsing targets and 6 bottom swinging targets. Targets made from AR500 1/2 inch steel, front deflector plate from 1/4 inch AR500. Withstands
Shooting tree with 6 swinging targets made from 1/4 inch AR500 steel, withstands all handgun ammunition except magnums. Base designed to be buried about 16 inches, 15 degree angle built in. Good for 2
2 Redwood benches with concrete legs and backing, made by Allied Concrete out of KCMO - need a little love and paint job
10 ft. horse drawn rake from early 1900's
275 gallon tote, pressure cleaned, great for livestock or garden watering
275 gallon tote, pressure washed, great for livestock or garden watering
180 ft. of 2-2-4 Aluminum underground electric wire and also 45 ft. of 4/0 Aluminum direct burial wire
2 Heavy duty Plastic shelves - large shelf rated at 150 lbs. per shelf and smaller shelf rated at 100 lbs. per shelf
2 small rolls of 1-1/4 inch and 1 inch HDPE pipe
40 ft. of 36 inch steel railing
Custom smoker built on site, made from 1/4 wall steel pipe, holds 8 slabs of ribs, precise air adjustments for inlet and smoke outlet
Trash bin designed to dump with forks, used to catch sawdust from wood shop
4 skid steer tires and rims from a 555 New Holland skid steer
2 stainless steel pots and pans hangers, great for setting up a commercial kitchen
Lot of hand sprayers and 1 SOLO back pack sprayer
Werner 12 foot extension ladder and a new set of ladder jacks
Barrel full of tools - shovels, scrapers, rakes and more (barrel has holes)
About 100 - 3/4 x 18 inch concrete form stakes
100 amp temporary electric service with 5 GFI outlets and 20 amp breakers, and 1 - 20 amp double pole plug with a 40 amp fused safety switch with plug
8 Traffic barricades with lights
1 concrete bull float with 3 - 6 ft. handles and 3 Concrete cum-a-longs
1 wheelbarrow
High Wheel vintage cultivator with plow
1 - 2 wheel hand truck and 2 Oxygen cylinder carts
Dachshund Vintage boot scraper from the 1940's or 1950's
Smith and Wesson knife, Paracuda FS machete, New Buck Camp ax w/sheath
Smith & Wesson knife, True Temper camp hatchet, 2 Dream Reach throwing axes all new
Northwest trail knife, Buck Knife, 2 Dream Reach throwing axes all new
Reel to Reel Akai tape recorder M-8 w/ double amps, purchased 1967 in Sasebo, Japan
Quik Trip cooler, never been used
Akai M-8 Reel to Reel tape recorder, purchased 1967 in Sasebo, Japan, works fine
Jewelry Armoire in great shape lined with green felt
Victor limited Stereo, purchased 1966 in Sasebo, Japan, with tape deck, receiver, and record player
Lot of Easter rabbits, large rabbits weigh about 5 lbs
1 Pampered Chef mini loaf dish and a Pampered chef pizza stone, never used
1 Manny antique Juicer, 1 Avon candy dish with lid, 1 vintage 16 inch tall candy dish on pedestal with lid
1 vintage electric lamp and 1 glass vintage display box with a brass frame
1 Pampered chef muffin dish and 1 Pampered chef Heritage stoneware tray, never used
4 wooden children's rocking horses and 1 children's wooden wheelbarrow
Vintage glass relish dish and 8 clear glass serving dishes
1 Star of David glass tray 13 inch and 1 Star of David glass bowl
3 glass 24% lead crystal pieces with 3 glass candy dishes
2 large stags, made out of poured resin each weighs 30 pounds vintage
2 Christmas Memories dishes 1981 and 1982 plus 2 Precious Moments dishes
Religious glass dish and Christ knocking at the door plate in 22 K gold
Tom Clark Gnome of Moses, signed by Tom Clark 1989, number 74
Vintage Mount Clemens Pottery decorative plates 22 K gold trim Christmas plates
Wooden End table 24 inches tall x 18 W x 31 L great shape
Many items on left half of table, all vintage, several worth significant money
Right half of table has several unique items, collection of decorative night lights, several treasures
Various pen sets, 3 imark wooden pen set, set of gray pens in case, 1 set of Cross pens w/ paperwork, 2 other pen sets, 1 Nebo pen light
Black Bear rug, bear killed in Otter Tail county, Minnesota about 1950, has a nice black felt sewn in lining
Upright Piano, Made by Ebersole August 26, 1900, last tuned 1986, made in Cincinnati, Ohio
9 piece set of Porcelain decorative napkin holders - vintage
Antique St. Louis Railroad lantern with red lens, lens has a crack
1968 Case Kodiak Hunter Knife with paperwork, box, sheath in Pristine condition
Set of 8 Johann Haviland China, made in Germany, Sephia Rose Pattern, with 4 rare ash trays, sugar bowl, cream pitcher - never used
10 Tuscany Long stem crystal wine goblets with Tuscany sticker, new and never used Vintage
Pickup by Appointment May 28 & 29
Large pile of walnut, all heartwood with no white wood good 4 sides in random lengths widths - 661 board feet, moisture content 8.5%, 3/4 inch
1-1/2 inch Red Oak purchased from Quincey, Illinois in 2000, 11 boards 9 ft.+ x 10 inches and 6 short boards, total 106.5 board feet. Moisture 8.5 to 9%
White Ash 3/4 inch thick good 3 sides with moisture of 9%, total 500 board feet
Red cedar with moisture of 8%, totaling 510 board feet with 92 boards finishing at 9 ft. long and 4.5 inches wide, rough sawn 15/16 inches thick. Harvested on site in 2010.
Small amount of Butternut, 22.5 board feet, 3/4 inch thick and 9 foot long good 3 sides, 9% moisture
Walnut 1-1/2 inches thick with 3 sides good and moisture at 9%, 440 board feet
Curly Maple purchased from Paxton Lumber in KCMO about 20 years ago, good 4 sides at 3/4 inch thick and moisture of 8.5%, 48 board feet
3/4 inch walnut good 3 sides with moisture of 8.5%, pile totaling 720 board feet
Pile of white oak totaling 360 board feet, moisture of 9.5%, good 3 sides, random widths with lengths of 9 ft. 6 inches finished
15 short pieces of walnut all heartwood, 1-1/2 inches thick, about 54 board feet with moisture of 9%
Native maple with all boards finishing out at 5 ft. 6 inches long, needs planed to 3/4 inch, several wide boards, moisture of 9%, approx. 120 board feet
Walnut 4x4's - full 4 inches, 16 that finish out at 8+ feet long, 1 at 6 ft. 10 inches and 1 short 4 ft. 2 inches. All heartwood with moisture content of 9%
RBI Model 820 or 20 inch planer with 2 new sets of blades, sanding drum attachment with 4 rolls sandpaper, gang saw attachment, new belt, variable speed automatic feed attachment and 5 HP motor
Makita 10 inch compound miter saw works great
Nice roll around cabinet with 2 shelves
Craftsman Oscillating spindle sander with 20 assorted sanding sleeves, less table
Craftsman 2 inch x 42 inch belt and 8 inch disc sander with new belts and discs, less table
Craftsman Model 102 6 inch jointer with 1 set of new blades, includes stand, made about 1948, works great
11 board feet of SPALTED BUTTERNUT, 2 INCH THICK BY 9 FT. LONG, 7% MOISTURE, HARVESTED ABOUT 600 FEET FROM WHERE IT IS DISPLAYED
2 Vintage pitch forks - 1 four prong and 1 three prong, purchased from Scarcliff Hardware in Holden, Mo. 1950
6 shelf really nice cabinet with doors and a 15 cubby hole cabinet included
Vintage sled in good condition from the 1950's, seller used it personally
Heston and Anderson wood lathe made about 1946, modified to turn up to 11 inch stock, variable speed by belt and pulley, 2 sets of turning tools with wood bench included
Dewalt DW672 offset trim router
Milwaukee Magnum hammer drill 1/2 inch, new never used
2 Sanders, 1 Skill mod. 490 and Dewalt DW 412
Craftsman Industrial plunge router 3-1/2 HP with 1/4 and 1/2 inch collets
New, never used Porter Cable router Model 6902, 1/4 inch and 1/2 inch collets
Craftsman Commercial router with case and guide
Delta Jigsaw
Craftsman Model 315 3/8 inch drill
Rotozip Spiral saw with several pkgs. of new cutters
Servis 1/2 inch electric drill, single speed
2 Bosch Corner sanders Model B7000 with a pail of new sanding discs
Bosch Pneumatic stapler Model S32sx 1/2 inch - 1-3/8 inch
Craftsman variable speed scroller saw works great
Dewalt orbital sander Model DWE6421
2 Pneumatic brad nailers Models BT50B and Model BT35B
Columbia Model 9650 6 inch bench grinder 1/2 HP
Stanley Bostitch Framing nailer pneumatic, uses 2 inch thru 3 inch nails
Power Kraft JIG SAW works fine
Porter Cable Model 511 Cylinder lock boring kit, brand new never used with case
Brand new SCHLAGE Model 40-056 Boring Jig kit, never used with case
Ethan Allen table with 2 benches (1 bench stripped), good shape purchased new
Dewalt Model DW 317 Jig Saw, only used a few times
Porter Cable cutout tool with new bits
Porter Cable finish trim saw
Bostitch Pneumatic Trim Nailer Model N60FN great shape
Ryobi Laminate trim router Model TR 30U
Model 77 - 7-1/4 inch geared skill saw
Porter Cable orbital sander Model 333 with box and new pad
Model 77 - 7-1/4 inch skill saw
Dewalt Model DW471 7 inch grinder
Makita 3 inch belt sander, box and 2 boxes of belts
Porter Cable 333 orbital sander, box, new pad and new pad screws
Bosch Model B7250 orbital sander
FEIN Model 9.55.13 1000 watt auxiliary tool control Vacuum with box of new bags, lets you run wood tools inside without dust
Dorm size refrigerator, works great, been plugged in for about 2 months
Purple Heart wood 10-3/4 inch wide x 8-1/2 feet long x 3/4 inch, 9% moisture, 7+ board feet
Pecky Cypress 1 inch thick, 6% moisture, 8.33 board feet
Marshalltown 12 inch laminate floor cutter, works great
7-1/4 inch skill saw Model 574 works great
Ryobi Variable speed Mini Lathe, turns stock up to 18 inch long
Wilton 4 inch bench vise, like new
Craftsman 20 inch scroll saw, blades in compartment on saw, Contractor Grade
Black and Decker Workmate Model 400 good condition
Craftsman 6 inch belt sander made about 1948, with belt and several 8 inch discs, works great
3 adjustable floor standing rollers for catching material from planers, table saws etc.
Craftsman 12 inch Band saw with 12 new blades, purchased new about 1979
7 Vintage yard sticks
Seymore bush Scythe with a RIXFORD blade, about 90% of its metal remaining, most of its original red paint, made about 1949
Skilsaw 10 inch portable compound table saw
Craftsman Compound table saw made about 1950, very smooth, table tilts for angles, runs like new
4 antique Singer sewing machine side drawers, great shape with finger handles and decorative designs, 13 inches long x 3 inches deep x 4 inches wide
Bostitch Oil less compressor 2 HP Model CWC200 WT
6 vintage hand saws with fair condition, most are Disston
Baldwin Model 7 Polished stainless steel door pulls, 5 total, 4 inches wide and 16 inches long
Antique hand forged Hay hook and pry bar, trowel, garden tool and wood chisel
3 Baldwin brass door pulls + 6 Baldwin brass door push plates all new
Antique wooden pulley, double iron pulley, metal window scraper, wooden mallet
Antique 2 hand forged clevises, Saw set tool, and antique 1920's spark plug sockets
Weed Brand Horseshoe pulling tool 1913, Hoof trimmers, spring loaded trimmers, and a vintage set of UTICA Cyclone fence pliers
2 vintage drill braces
2 vintage hand sickles
Vintage AX heads and 1 vintage ax with modern handle
Vintage Diamond forged Monkey wrench, 1 pair of horse hair shears, large tin snips and 1 pair of offset pruners all vintage
Craftsman 1950 made 1/2 inch bench drill press with floor stand, drill bits, cutting oil
12 inch miter saw blades some new and some sharp
5 new 10 inch saw blades
5 new 10 inch miter saw blades with 17 blades some dull some sharp, even some 8 inch
Antique Disston large miter saw with strong back for riding in a jig
12 vise grip wood clamps various lengths and 2 hand clamps
Antique copper head soldering irons, very rare, really hold the heat, great shape
New FELKER 10 inch Diamond blade for cutting stone, granite etc.
11 new 7-1/4 inch skill saw blades
5 new packages of various grit sandpaper
Roll around cabinet with 48 cubby holes and 1 open top shelf
Craftsman shaper with 26 various cutter heads, complete new spindle assembly included, great for small wood shop
Craftsman Router table with a 1/2 HP craftsman router attached, laminated extensions on both ends
Craftsman digital Plunge router 1/4 inch and 1/2 inch collets, brand new in sealed box, purchased about 25 years ago as a spare
FREUD DADO cutter 8 inch - 1/4 inch thru 13/16 range, cuts smooth
Craftsman fixed base router with 1/4 and 1/2 inch collets, new still in sealed box
Another new old Craftsman router, same specs as lot 102
Makita 3 inch portable planer with guide and case
Craftsman Multipurpose fence guide system and 2 straight line guides to rip crooked lumber, all brand new never opened
4 brand new boxes of 1-1/2 inch sand paper, 80-120-240 & 320 grit, 50 yds per box
Porter Cable Plate jointer with 4 containers of biscuits, used only one time
4 vintage Disston hand saws, 1 newer Disston about 30 years old
1 full box of cedar planking and 18 separate cedar planking new pieces
Wood Tek floor mounted drill press, variable speed, 1/2 inch chuck, with 4 Rosette cutters, 1/2 inch drill index and cutting oil, purchased new in 2007
18 boxes of 3 inch sanding belts, various grits, Porter Cable
4 - 36 inch Jorgensen wood clamps and 1 Pony 1/2 inch pipe clamp
Various router attachments and 8 corner and straight frame clamps
1 new 16 piece set of DIABLO SPEEDMON spade bit set
4 combination squares and 2 additional squares
1 Dowel Jig tool, 2 small levels, 3 Yankee screwdrivers - 2 small and 1 rare large one, all work fine
1 RABONE angle square, 16 inch square, 12 inch square, and a RABONE Wood and brass adjustable inlay Chesterman mortise marking gauge - both Rabones vintage and like new
5 C clamps and 2 quick set clamps
1 antique CHATILIONS IMPROVED SPRING BALANCE 50 LB. SCALE, 1 antique valve lockable compression tool and 1 valve grinding tool with a valve set tool
1 Craftsman vintage Molding head new in the box, 1 vintage Drillsaw kit, and 1 new set of FMT 1/4 inch to 1 inch countersink set - brand new
Coping saw and 2 Disston trim saws, 1 is offset for flush cutting in the case
Craftsman router circle cutting jig
Vintage Stanley Brace and a 10 piece set of auger bits
1/4 - 1/2 inch drill bits all great shape with most made by Silver and Deming 1/2 shank
4 vintage large layout squares, layout rafters, stairs, and ridges all very legible
3 Wiss tin snips + 5 assorted sizes of vise grips
12 inch to 4 inch adjustable wrenches - 10 total
3 tin snips and 1 set of 3/8 extensions
Set of Barcalo Buffalo wrenches size 9/16 to 1-1/4 and also 1 - 3/8 inch wrench, purchased from a traveling salesman from New York in 1952 in Cass County, Mo.
8 wood chisels, 4 on the left came from a Western Auto store in Holden, MO. in the early 1950's
Cool vintage wrenches with names such as Herbrand, Fordson, 12 in total, collectors dream
12 more wrenches, several manufacturers
19 Antique wrenches, all open end
5 more specialty wrenches
4 modern Stanley block planes
1 Miller Falls Plane 9 inch vintage
1 Trimont 18 inch pipe wrench from the 1940's, 1 antique Monkey wrench and 1 unknown wrench
1 - 13-1/2 inch Bailey plane, good condition vintage
1 Vintage Victor 12-1/2 inch plane, great shape
1 Bull nose clamp with lead rope, Cowbell with neck strap used on a Hereford named Clarabell in the late 1940's, 1 pill pusher, 1 set of kick chains
Block and Stone chipping hammer & a Plumb vintage brick hammer
3 vintage Lufkin 6 ft. folding rulers, 1 Evans white clad 50 ft. steel tape, vintage
1 antique cleaver, Antique log hewing large chisel, 1 chisel
2 sets of Ice tongs used to load grandmother's ice box in Independence, MO. in late 1940's and 50's
2 meat saws, 1 Disston and 1 Sheffield, used many times to split beef and hogs and quarter them
1 hand brace and 1 shoulder brace, both vintage
Craftsman Mortise and Tenon fixture never used from the 1960's
Craftsman Deluxe Dovetail fixture never used from late 1960's
Compound Radial saw, 2-3/4 HP, 10 inch with stand
1970's Craftsman 12 inch planer with 1 new set of blades, wood stand included
3 Tool boxes with trays
Wood Tek Shaper, 3 HP, flip a switch for reverse, sliding rear table with laminated extensions, 40 shaper bits and router bits, style and rail cutters and 12 various bushings, purchased new in 2007
Craftsman 6 inch grinder with floor stand
3 HP 6 inch Sawdust Collection system, 220 volt, with push button switch
Jorgensen 4x7 wood vise with quick release, needs removed from bench
Jorgensen 4x10 wood vise with quick release, screwed to bench
2 Meat hooks used to hang meat for cooling in the 1940's and 50's
40 pounds of 9x3 and 10x3 and 10x3-1/2 inch wood screws plus several boxes of other screws, all new in boxes of 100
300 new Tapcon screws with bits and driver, 18 boxes of various sheet metal screws and wood screws, all brand new
9 boxes of 75 sheet metal screws and 8 kits of screws, spring pins and more, all new
3 new rolls of Caution tape, Electric underground tape, and water line below tape, 1 new package of Frog tape 2 inch, 4 - 2 inch duck tape rolls
6 new boxes of Hillman 6 inch gutter screws and spacers
Real Govt. Surplus ammo cans like new, 5.56 and 30 cal. cans
1 case of 12 hand sanitizer, 3 tubs of lubricated hand towels, 1 large bottle of Orange cleaner
3 gallons of WD-40, 4 gals of WD-40 rust remover, all new and never opened
6 dozen safety glasses, clear and smoke, and 400 pair of new ear plugs
6 bottle jacks, 2 scissor jacks
1 Gundalach 12 inch VCT tile cutter with rollers for easy moving
Stihl 044 chain saw with 30 inch bar and a new 36 inch bar with chains, runs great
Stihl 029 chain saw with 20 inch bar, new chains (dull and sharp), runs great
Echo 12 chain saw and Poulan S25 AV chain saw, both were running great, comes with a few chains
Stihl AHS 80 leaf blower, works fine
5 plastic gas cans
Stihl MS194T 12 chain saw, used only 2 times, like new, bought in 2023
12 Wood boring bits, mostly Milwaukee
Stihl HS80 shrub trimmer, runs great
5 full gallons of Stihl bar oil and 3 new six packs of gas mixture for Stihls
Pex crimping tool in case, used only 1 time
27 hole saws with adapters and arbors, includes tool box, 1 inch to 6 inch
Greenlee 7 piece set of wood boring bits in case, set of Lenox hole saws
Dayton Electric soldering gun and Milwaukee variable speed 3/8 inch drill
20 - 18 inch auger bits, from 1/2 inch to 1-1/4 inch, several are new with tool box
4 new sets of Tapcon kits
1 MC Acetylene tank and turbo torch kit with tool box + 1 new 12 inch turbo hose and several sizes of tips and soldering iron
1 new fiberglass deep sink with legs and new faucet with box included
5 plastic gas cans
5 plastic gas cans
120 Fernco couplings sizes 1-1/2 inch through 6 inch, all like new, also 95 shielded couplings 1-1/2 inch to 4 inch all like new with clamps
5 rubber test balls and a few ADS couplings
4 swivel sheet rock sanding poles, 1 hand sander and 4 mud pans, 1 spud, 1 electric drill mixer and 5 pkgs of sanding screen
1 Ridgid 2-1/2 thru 4 inch geared threader, Model 4PJ, almost new teeth, with Ridgid Flex drive shaft
1 Dewalt sheet rock screw gun
Milwaukee Sawzall and case
1 Milwaukee 1/2 inch right angle drill and case
Makita 12 inch chop saw with 6 new blades
Olympyk 14 inch quickie saw with 16 new blades for steel, stone and concrete
Milwaukee 1/2 inch drill and hammer drill w/case
Milwaukee 1/2 inch drill and hammer drill w/case
Remington Model 400 power tool w/case and hundreds of nails and loads
Milwaukee 4 inch grinder
Milwaukee 1-1/2 inch hammer drill with full set of bits + 1 - 2 inch core bit
Mystery tub of goodies, take a gamble
Greenlee MC cable dispenser, works great and no more tangles
Tote packed full of painting supplies, several Purdy brushes (new and used), pans, and lots of other tools
Mystery tub
3 plastic kerosene cans and 2 gas cans
Milwaukee deep cut Band Saw with case and 36+ new blades
Makita 3 inch grinder with new discs and case
Milwaukee Sawzall w/case
Milwaukee 4-1/2 inch grinder
Makita 7 inch grinder
1 Portable air bubble
1 Portable air bubble
1 - 4 ft. manhole cone bar and 1 barrel bar for 4 ft. manholes, 6 ft. cable choker, with 3 new web chokers still in package
Ridgid 400 A threader with Ridgid oiler and 2 gallons of cutting oil
Ridgid Model 450 chain vise for up to 5 inch pipe, like new
Coleman power mate 1000 watt generator
Wisconsin 1-1/2 inch water pump with 25 feet of suction and 25 feet of discharge hose
Makita 10 inch miter saw
Dewalt hole hog drill right angle w/case
GE 3 pole 60 amp safety switch fusible, 2 Eaton 2 pole 100 amp safety switches fusible, 1 - 1/4 HP Dayton electric fan motor, all new
2 Cutler Hammer 30 amp Double throw transfer switches new, 1 Milbank 3R RT enclosure with cover and 5 bottles of pulling lube
13 rolls of Scotch 88 tape, several rolls of Scotch 33 tape, 2 boxes 2200 mastic pads, hundreds of yellow and red wire nuts, several Westinghouse double pole breakers, 3 - 70 amp main lug disconnects,
1 case of 175 watt dusk to dawn bulbs, 2 Tripp Lite power bars, 1 case of Satco 120 volt 9.5 watt LED bulbs, 1 case of Satco 15 watt LED bulbs medium base, 2 - 125 amp main lug disconnects + more
1 Hydraulic Oil pressure pump and 3/4 inch punch for steel, 2500 PSI
Ridgid 12R threader with 1/2 inch thru 2 inch dies
11R Ridgid threader with 3/8 thru 1-1/4 inch dies
Ridgid 36 inch aluminum pipe wrench
Ridgid model 4-8 2 inch to 4 inch heavy duty pipe cutter
36 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
Tyler 20 inch electric wire cutter for copper and aluminum up to 4/0
30 inch Greenlee electric wire cutter for up to 500 MCM copper and aluminum
3 - 3/8 inch load binders and 3 - 5/16 load binders
1 new and 1 used Ridgid drop head toilet augers
3 long cable drill bits, 6 ft., 54 inch, and 24 inch
2 Ridgid 2 inch pipe cutters
1 RIDGID 4 wheel pipe cutter for where there is very little room to cut pipe
10 fuse pullers, from 200 amp to 12 volt mini fuses
Ridgid inside pipe cutter, from 2 inch to 4 inch
2 Ridgid tubing cutters up to 2 inch and 1 Ridgid ratcheting tubing cutter to 1 inch
1 Ridgid plastic pipe cutter, 1 - 2 inch tubing cutter and 1 - 1 inch tubing cutter Ridgid
3 Flare tools - 1 real nice Ridgid and 2 others
2 Ridgid 24 inch pipe wrenches, 1 aluminum 18 inch pipe wrench
1 Diamond chain wrench, 1 Fuller 24 inch aluminum pipe wrench, 4 other pipe wrenches
3 Ridgid pipe wrenches and 1 auto adjust
4 - 1-1/8 inch to 1/8 inch tubing cutters
1 grappling hook, 2 new mole traps, 1 after market havens grip, and 2 very rare real Havens grips 2 sizes
2 cable jacks with 1 set up with 2 pulleys
2 cable jacks and 1 ratcheting fence stretcher
15 plastic pipe saws with 5 new
2 pneumatic paint pots, 1 Develbiss and 1 NAPA
Lots of grinding discs and cutting discs, 7 inch, 4-1/2 inch, 4 inch, 3 inch +++ with most of the 7 and 7-1/2 inch tapped 5/8 inch
GMC grill for a 2007 Envoy, in great condition
22 piece box end and open end set of wrenches, AIGO brand, used these wrenches for over 60 years
4 EMT conduit benders 1/2 inch to 1 inch
10 pad locks and keys with 4 that can't be cut with bolt cutters
2 fiberglass grade sticks, both 25 feet, 1 in 10ths and 1 in inches
10 flexible gas connectors in various lengths
2 liquid transfer pumps, 3 gals per stroke
20+ Kellems in almost every size
15 piece wrench set, AIGO brand, owned for over 60 years
6 piece set of adjustable wrenches 24 inch thru 6 inch, all name brand
10 Klein Leather pouches of various sizes, all new
3 sets of jumper cables with 1 set 25 foot made out of #4 stranded copper
1 Rust-Oleum Stripe painting machine with 4 cans of paint
1 - 24 inch floor standing fan with a new Dayton motor installed last winter
Several hundred pounds of steel - 1x3x1/4 inch tubing, 1 inch steel pipe, 2x2x1/4 angle, 2x2x1/8 inch angle, 40 feet of 2x2x1/4 tubing, several feet of flat iron x 1/4 inch thick. About 500 lineal fee
2 new tank sprayers both still in the box
1 partial case of Tefla Lube, 8 cans in all
1 case of 6 tubs of Rid O Grime wipes
1 case of 12 Tefla Pent (works better than liquid wrench)
1 - 500 foot roll of #10 THHN stranded wire and 1 - 500 foot roll of #10 THHN stranded wire, both new rolls
1 case of 12 Rid-O-Grime abrasive soap
1 case of 12 Master blaster
1 case of 12 Rid-O-Grime
Another case of 12 Rid-O-Grime
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
2 brand new leather welding protectors - 1 shoulder and arms and 1 leather welding apron, very good soft leather
3 Pneumatic Pressure regulators with oilers
Dozens of Die grinder attachments, all for 1/4 inch die grinders
3 Air tools - 1 3/8 ratchet, 1 butterfly 3/8 inch impact wrench and 1 NAPA 1/2 inch impact wrench
Dayton Electric impact wrench with case and 6 sockets
1 Right angle 1/4 inch die grinder (new), 1 used straight 1/4 inch die grinder and 1 pneumatic weld descaler (never used)
Several sets of impact sockets with 2 sets of deep and tray
3 new plastic parts bins, provides lots of storage
1 Generac High pressure 3000 PSI power sprayer with 6 various tips, 5 HP Honda gas engine
Fastenal Bolt bin with bolts, sizes 1/4 inch to 5/8 inch in all lengths from 1 inch to 3 inch, grade 5 coarse thread, with nuts, flat and lock washers, several hundred pounds plus 3 cubby holes of 1/2
1 Stringer safety pole belt with 2 lanyards
1 Oxygen cylinder
1 Acetylene cylinder
Lincoln wire welder Model 170-T with cart and regulator, hose and tank for MIG welding, several rolls of solid wire and flux wire, 220 volt, uses a double pole 20 amp breaker. Also has 25 ft. extra 10
10 new cans of Flex-Seal
5 good pair of welding gloves and 2 new pair, welding goggles, and welding glasses
2 nice half face 3M masks with gas and organic vapor cartridges, all new, never used
1 new 250 foot spool of 3/8 inch twisted rope, 50 foot of 3/8 inch nylon rope, 1 - 100 ft. new 3/8 inch twisted rope and 50 foot of 1/4 inch nylon rope, all brand new
10 piece new set of soft finish WIHA screwdrivers
14 piece set of new WIHA Insulated Screwdrivers
Vintage orange handled SNAP ON Screwdrivers purchased in 1990 from Snap On truck in Canton, Mo., also includes a rare SNAP ON 18 inch pry bar
2 ratcheting SNAP ON screwdrivers with bits in handle, purchased 1990, rare find
2 rare SNAP ON screwdrivers with pistol grip color
3 Partsmaster ratchets 1/4, 3/8 and 1/2 inch, all extendable, new
32 piece 1/4 inch socket set, purchased from SNAP ON truck in Lee's Summit, Mo. in 1968
Another new set of Partsmaster ratchets extendable 1/4, 3/8, and 1/2 inch
Great vintage SNAP ON tools set - 38 bits, 10 piece 1/4 inch socket set, 4 long bits, with case and ratcheting screwdriver
Possibly the best made set of various pliers by KNIPEX
WIHA new tools set - set of security bits with case and ratcheting handle (36 bits), 1 set of miniature nut drivers, 8 piece set of precision hex drivers and set of 8 precision Torx drivers, all new a
Set of ratcheting electric wire cutters, Model B97-1383, cuts up to 250 MCM copper or aluminum, Klein tool
1 set of WIHA nut drivers all brand new, 11 piece set
2 very rare items - 1 vintage set of blue SNAP ON picks with plastic case bought in 1969 (never used) and 1 rare set of miniature WERA T handled Torx drivers made in Czech Republic
1 - 8 piece set of new insulated Allen wrenches 1/8 inch to 1/2 inch, by WIHA
1 - 10 piece set of KLEIN Journeyman Hex key wrenches with both T handled and 90 degree Allens, 1/8 to 3/8 but includes 1/2 inch also, with steel stand
Same as lot 320 - KLEIN Journeyman Hex key wrenches set
1 new 44 piece set of 1/4 inch sockets and tools with case, Westward brand
5 individual items - Gear wrench mini screwdrivers, Brownell miniature screwdriver set in wooden box, Craftsman Calipers, Irwin bolt extractors, Century bolt extractors
Craftsman collectors - Vintage miniature tool set in a nice leather case, new
Dewalt new set of bits, nut drivers, drill bits, 1/4 inch extensions
New Gear Wrench reversible ratcheting nut drivers with handle
New in the box KRIEGER 2000 watt inverter, clamp to 12 volt battery to get 110V
4 tools, all new but most vintage - Pop rivet gun and rivets, Klein Screwdrivers, Craftsman 1/4 inch socket set, Hitachi 40 piece bit set
6 new Gear Wrench long needle nose pliers, hinged centers
Westward new set of 1/2 inch socket set in Metric
Set of Continental used tap and die set, a very unusual and large set
New set of Irwin tap and die set, with 2 separate die handles
Unusual set of bits by IFIXIT new, Minature tool set, new Stanley 25 ft. tape
New Rock River mini screwdrivers, 9 new 3/8 inch drive hex bit set, and a rare Craftsman drill bit set with all bit sizes 1-60 in a self positioning case
General ratchet bit set, Vintage Stanley 100 ft. steel tape, Vintage White Clad 100 ft. tape, Klein strippers, and a rare set of SNAP ON pipe extractors
Set of Orifice drill bits with case, 1 set of Ridgid Pipe extractors (vintage), 1 very rare mini drill bit index and an Irwin bit set (new)
WIHA bit set - anti static, new and 2 new Irwin multi bit sets with a bit set
New Amazon Basic tool set, 151 piece, also 1 new HK Porter wire rope and cable cutter, new Lenox step bit
Century tap and die set (used), Mechanics plier set, 1 HUOT tap and drill set
Tap and die set used, New HUOT tap and drill index and new Westward tool set
Test equipment lot - capacitor tester, gas leak tester, 6-way voltage meter, wire tone tester up to 1000 feet, amperage tester, polarity tester, gas pressure tester and more. All tested and work fine.
New Jobber drill bit set up to 1/2 inch, Very rare Starrett punch set in wooden case
New Irwin bit set, 2 Lenox new step bits, new General miniature screwdrivers
New Westward mini pliers, 1 new Klein mini bit set, 1 set of screw extractors
New Dewalt 1/4 inch socket set and new set of 3/8 drive hex bit set in cases
1 new Lenox fat boy torch set in case, purchased about 2008, Pristine
New Dremel drill set with case and 1 new Dremel accessory kit
Rare Mini tool set in leather case - new but a little rust on some tools, case faded, Vintage Craftsman
New Westward 172 piece bit set, Dewalt
6 various hand tools with 2 new Dewalt ratchets 1/2 and 1/4 inch
New in cases Dewalt 1/4 inch socket set with 1 new set of 1/4 inch deep sockets
New Lincoln battery powered grease gun with case, never used
Rare socket set by WILLIAMS - bolt thru set, brand new with case
Snap On collectors - purchased 1990 screwdriver set, plus a bonus 1 vintage Snap On 7/16 inch wrench
2 New Makita tool sets with cases
1 Craftsman vintage socket set, also a vintage SK Wayne socket set with a Craftsman ratchet size 3/8
Blackburn Model OD Wire splicing tool with several boxes of crimps and sleeves, with all 3 dies attached, insulated handles
Nicopress compression tool + 2 boxes of crimps
Nicopress compression tool + 2 boxes of crimps - crimps are stronger than the actual wire, great for splicing barb wire and woven wire
New Fluke 333 Clamp electric meter
New Fluke 333 Clamp electric meter
New Ideal Electric clamp on meter with case
New Fluke 323 clamp on meter
New Klein CL800 clamp on meter
New Fluke 373 clamp meter
2 sets of 2 new Dewalt 12 foot ratchet straps
1 new Klein needle nose pliers, new set of Klein insulated screwdrivers with case, and a new set of drills
1 set of rubber insulated to 1000 volt gloves, made in 2021, used only 1 time, comes with all three layers and bag, size 9 by National Safety
6 pair of assorted Gear wrench long pliers
7 various pliers and tools, all high end
9 Chalk lines with one new
9 new Dewalt various bit sets, all pristine
2 sets of Greenlee Punch sets in leather cases, brand new in the box, 1/2 inch thru 2 inch
3 Greenlee punch sets that have been used, 1/2 inch thru 2 inch
4 Milwaukee bit and drill set kits new
3 Milwaukee new bit and driver sets
New Gear wrench Ratcheting nut driver set metric and SAE
3 new Milwaukee bit sets and 1 used drill bit set
4 new Milwaukee bit and nut driver sets
3 new Milwaukee bit sets
3 new Milwaukee bit sets
2 new Milwaukee bit sets and 1 new Milwaukee drill bit set
2 vintage Craftsman 1/4 inch socket sets, Metric and SAE + 18 individual wrenches several vintage, with some Williams
10 SDS masonry drill bits, 9 new and 1 used, by Dewalt
5 new 5 gallon potable water jugs, never opened
60 ft. of 1/2 inch O.D. copper
49 ft. of 5/8 O.D. L copper
Used Rebar bender and cutter, works great for small bending projects
3 brand new 25 ft. trouble lights
100 ft. of 5/8 O.D. K copper
42 ft. of 3/4 inch I.D. K copper
2 lug wrenches, 1 for small lug bolts and 1 for heavy truck, along with 5 various tire tools and 2 peewee lug wrenches
10 Drawer Map cabinet with ball bearing drawers, lined drawers, screwed to wall
1000 zip ties from 4 inch to 18 inch, 10 pkgs never opened
5 various basin wrenches and lengths, 1 spud wrench and 2 seat wrenches
New 8K piece Heavy duty screwdriver set by Partsmaster
2 new in the box ISOBAR Tripp Lite power bars with 3840 Joules surge protection
4 various pipe wrenches and 1 Ridgid 18 inch offset pipe wrench
5 - 6 inch thru 15 inch adjustable wrench set
2 JCM ratchet wrenches and 11 other wrenches
5 vintage adjustable pliers, work really well
1 small HK Porter bolt cutter, 2 claw hammers (Stanley and Estwing) and a man hole pry bar by PROTO
9 assorted pliers and vise grips, all good condition
14 scissors with 2 new tire plug punches and kits both new in blister packs
4 strikers, 3 wire brushes all new, flat bar
1 - 24 inch ball pein hammer, claw hammer, plastic mallet and 1 hatchet
6 assorted pump pliers
8 various hand garden tools
2 - 4 ft. empire levels, 1 - 3 ft. level and 1 hacksaw
1 set of new Gear wrench combo wrenches, 1 used set of Craftsman nut drivers, 2 new Stanley 25 ft. tapes
New set of 10 Partsmasters screwdrivers, 1 Klein new cutters and 1 new set of Rock River nut drivers
1 new set of 5/16 to 15/16 wrenches Westward, 1 new 25 ft. Stanley tape
New Bostitch hex drivers, 1 Klein ratcheting bit set, 5 piece set of Klein screw holders in case, and set of Stanley tools
New Westward nut driver set, and a new Gear wrench combo set
Best made tool set by XCELITE - a service master set
8 various tools - tin snips, hoof trimmers, and tile nibbler
Set of ARMSTRONG offset wrenches (3/8 to 3/4) and a new set of EKLIND ball hex key tools
Rare screwdriver set by Felo Rgonic made in Germany with case, highly rated as high end
6 Wiss sheet metal tools - snips, crimpers, circle cutters etc.
2 hacksaws, 2 coping saws, and 1 miter saw
5 bow saws with 8 new blades
New set of Ideal nut drivers, and a new set of Gear wrench combos SAE
2 new sets of Crescent wrenches with ratcheting base and sockets
New set of Bondhus ball hex drivers, Craftsman bit set, 3 shorty craftsman box end wrenches and 2 distributor wrenches
Large lot of Vintage car buffs tools - Ring compressor, compression tester, feeler gauges, spark plug gap tools and more
New Craftsman box end set 1/4 inch drive set, drill gauges and squares
1 set of Craftsman Tappet wrenches, 4 adjustable wrenches, 1 Craftsman mini screwdriver set
1 Vintage Sunex metric wrenches with case - 14 piece, only used rarely
New Craftsman 6 piece quick wrenches and a new set of extended reach quick wrenches by Craftsman
2 new Craftsman wrench sets, Ratcheting Craftsman wrenches, 4 piece set of Power Torque wrenches (each wrench fitting 3 different size nuts), all vintage
7 new sets of economical tools
11 new sets of various economical tools with 3 new rolls of duck tape and 1 partial roll of white duck tape
Diamond chain wrench, strap wrench, Ridgid meter wrench, Dewalt knife and 1 Irwin auto pipe wrench
6 tapes, 2 large rasps, 6 wrenches
4 new Mapp gas cylinders with a new auto light torch all new
4 new Mapp gas cylinders with a new auto light torch all new
6 Ridgid flare tools 3/4 inch to 2 inch and 2 plastic tubing cutters
8 adjustable pliers, 1 MC Cable cutter with 3 new wheels, 1 set of Allen wrenches
6 new tapes and 100 zip ties
4 - 9 inch torpedo levels, 1 new Stanley Fat Max torpedo level, 2 post levels
8 new rolls of tie wire
5 new 8 inch adjustable wrenches, 6 adjustable 6 inch wrenches, 1 Craftsman stud remover, 5 piece set of 8 point sockets with 1/2 inch drive for square nuts
3 new Potable water jugs never opened
Mystery tote full of goodies
Gold Foundry winch with 50 ft. of 3/8 cable and hook, 2 speed, purchased from the foundry in Independence, Mo. in 1990
1 bucket full of invert floats, trowels, and lots of concrete tools
2 antique Coal Oil cans (1 has no bottom), and 1 Mobil vintage metal gas can
2 toe lift sheetrock tools, and 4 sheetrock key hole saws
3 Gear Wrench adjustable pry bars, never used
1 Ford tapping tool fits 3/4 inch flare and compression corps and also 1 inch flare or compression corps
1 new in the box Pristine copper jumper cables
1 Vintage Magnavox Model 1500 receiver and 1 vintage Magnavox 8 Track recorder, both power up fine, purchased at Bob Johnson appliance in Harrisonville, Mo. in the 1980's
True Craft 3/4 inch socket set, 7/8 thru 2-1/4 inch, complete set with extras, used over 60 years, several extensions in original metal case
225 amp AC DC welder with 100 ft. of stinger and 100 ft. of ground, welds nice and smooth
MC Acetylene Air gas bottle with turbo torch and various tips and soldering iron
1 Kirk Welding Supply Oxygen bottle
Air Gas AC-B Acetylene tank
Air Gas AC-B Acetylene tank with a Turbo Torch attached
3 welding helmets - 2 with large lens and 1 regular lens & 2 headgear for shields
1 Acetylene tank AC-B size
About 75 lbs. of welding rod - 180 fleetweld, 7018 in 1/8 and 5/32, stored in controlled environment, coatings all solid, most still in original packages
11 used welding magnets and 9 new welding magnets
1 Earthway seed or fertilizer spreader with tongue, used one time, like new
1 Industries Inc. auto darkening welding helmet, works really well
All brand new items - wire brushes, chipping hammers, strikers, flints, marking chalk pencils, and 1 new welding stinger
8 C clamps, 18 Vise Grip brand welding clamps
Air Gas tank for MIG welding gas
Torch set up with Air gas tanks, 50 ft. of hose, 2 Harris torches, extra cutting tips and brazing tips, and cart - ready to work
1 - 22 inch floor standing fan with new motor installed last winter
New shooting bench with 1 inch top, built on the frame of a folding sawhorse
1 Solar battery charger with boost, works fine, has 2 knobs missing
1 Lawn Boy 150,000 BTU Salamander heater, always burnt kerosene, works fine
Partsmaster Stubby Ratchets - Set of 2
Assorted Garden Tools
2 large used welding jackets, no burn holes, really great quality jackets
Misc spray Paint and other assorted aerosol cans
Delta 12 inch Compound Miter saw, great condition
Barrel full of shovels, rakes, scoops, pick and more (holes in barrel)
Plastic barrel full of tools - shovels, hoes, pick, car wash brushes and more (holes in bottom of barrel)
Custom built 6 target plate rack system with 6 - 8 inch collapsing targets and 6 bottom swinging targets. Targets made from AR500 1/2 inch steel, front deflector plate from 1/4 inch AR500. Withstands
Shooting tree with 6 swinging targets made from 1/4 inch AR500 steel, withstands all handgun ammunition except magnums. Base designed to be buried about 16 inches, 15 degree angle built in. Good for 2
2 Redwood benches with concrete legs and backing, made by Allied Concrete out of KCMO - need a little love and paint job
10 ft. horse drawn rake from early 1900's
275 gallon tote, pressure cleaned, great for livestock or garden watering
275 gallon tote, pressure washed, great for livestock or garden watering
180 ft. of 2-2-4 Aluminum underground electric wire and also 45 ft. of 4/0 Aluminum direct burial wire
2 Heavy duty Plastic shelves - large shelf rated at 150 lbs. per shelf and smaller shelf rated at 100 lbs. per shelf
2 small rolls of 1-1/4 inch and 1 inch HDPE pipe
40 ft. of 36 inch steel railing
Custom smoker built on site, made from 1/4 wall steel pipe, holds 8 slabs of ribs, precise air adjustments for inlet and smoke outlet
Trash bin designed to dump with forks, used to catch sawdust from wood shop
4 skid steer tires and rims from a 555 New Holland skid steer
2 stainless steel pots and pans hangers, great for setting up a commercial kitchen
Lot of hand sprayers and 1 SOLO back pack sprayer
Werner 12 foot extension ladder and a new set of ladder jacks
Barrel full of tools - shovels, scrapers, rakes and more (barrel has holes)
About 100 - 3/4 x 18 inch concrete form stakes
100 amp temporary electric service with 5 GFI outlets and 20 amp breakers, and 1 - 20 amp double pole plug with a 40 amp fused safety switch with plug
8 Traffic barricades with lights
1 concrete bull float with 3 - 6 ft. handles and 3 Concrete cum-a-longs
1 wheelbarrow
High Wheel vintage cultivator with plow
1 - 2 wheel hand truck and 2 Oxygen cylinder carts
Dachshund Vintage boot scraper from the 1940's or 1950's
Smith and Wesson knife, Paracuda FS machete, New Buck Camp ax w/sheath
Smith & Wesson knife, True Temper camp hatchet, 2 Dream Reach throwing axes all new
Northwest trail knife, Buck Knife, 2 Dream Reach throwing axes all new
Reel to Reel Akai tape recorder M-8 w/ double amps, purchased 1967 in Sasebo, Japan
Quik Trip cooler, never been used
Akai M-8 Reel to Reel tape recorder, purchased 1967 in Sasebo, Japan, works fine
Jewelry Armoire in great shape lined with green felt
Victor limited Stereo, purchased 1966 in Sasebo, Japan, with tape deck, receiver, and record player
Lot of Easter rabbits, large rabbits weigh about 5 lbs
1 Pampered Chef mini loaf dish and a Pampered chef pizza stone, never used
1 Manny antique Juicer, 1 Avon candy dish with lid, 1 vintage 16 inch tall candy dish on pedestal with lid
1 vintage electric lamp and 1 glass vintage display box with a brass frame
1 Pampered chef muffin dish and 1 Pampered chef Heritage stoneware tray, never used
4 wooden children's rocking horses and 1 children's wooden wheelbarrow
Vintage glass relish dish and 8 clear glass serving dishes
1 Star of David glass tray 13 inch and 1 Star of David glass bowl
3 glass 24% lead crystal pieces with 3 glass candy dishes
2 large stags, made out of poured resin each weighs 30 pounds vintage
2 Christmas Memories dishes 1981 and 1982 plus 2 Precious Moments dishes
Religious glass dish and Christ knocking at the door plate in 22 K gold
Tom Clark Gnome of Moses, signed by Tom Clark 1989, number 74
Vintage Mount Clemens Pottery decorative plates 22 K gold trim Christmas plates
Wooden End table 24 inches tall x 18 W x 31 L great shape
Many items on left half of table, all vintage, several worth significant money
Right half of table has several unique items, collection of decorative night lights, several treasures
Various pen sets, 3 imark wooden pen set, set of gray pens in case, 1 set of Cross pens w/ paperwork, 2 other pen sets, 1 Nebo pen light
Black Bear rug, bear killed in Otter Tail county, Minnesota about 1950, has a nice black felt sewn in lining
Upright Piano, Made by Ebersole August 26, 1900, last tuned 1986, made in Cincinnati, Ohio
9 piece set of Porcelain decorative napkin holders - vintage
Antique St. Louis Railroad lantern with red lens, lens has a crack
1968 Case Kodiak Hunter Knife with paperwork, box, sheath in Pristine condition
Set of 8 Johann Haviland China, made in Germany, Sephia Rose Pattern, with 4 rare ash trays, sugar bowl, cream pitcher - never used
10 Tuscany Long stem crystal wine goblets with Tuscany sticker, new and never used Vintage
Pickup by Appointment May 28 & 29
Large pile of walnut, all heartwood with no white wood good 4 sides in random lengths widths - 661 board feet, moisture content 8.5%, 3/4 inch
1-1/2 inch Red Oak purchased from Quincey, Illinois in 2000, 11 boards 9 ft.+ x 10 inches and 6 short boards, total 106.5 board feet. Moisture 8.5 to 9%
White Ash 3/4 inch thick good 3 sides with moisture of 9%, total 500 board feet
Red cedar with moisture of 8%, totaling 510 board feet with 92 boards finishing at 9 ft. long and 4.5 inches wide, rough sawn 15/16 inches thick. Harvested on site in 2010.
Small amount of Butternut, 22.5 board feet, 3/4 inch thick and 9 foot long good 3 sides, 9% moisture
Walnut 1-1/2 inches thick with 3 sides good and moisture at 9%, 440 board feet
Curly Maple purchased from Paxton Lumber in KCMO about 20 years ago, good 4 sides at 3/4 inch thick and moisture of 8.5%, 48 board feet
3/4 inch walnut good 3 sides with moisture of 8.5%, pile totaling 720 board feet
Pile of white oak totaling 360 board feet, moisture of 9.5%, good 3 sides, random widths with lengths of 9 ft. 6 inches finished
15 short pieces of walnut all heartwood, 1-1/2 inches thick, about 54 board feet with moisture of 9%
Native maple with all boards finishing out at 5 ft. 6 inches long, needs planed to 3/4 inch, several wide boards, moisture of 9%, approx. 120 board feet
Walnut 4x4's - full 4 inches, 16 that finish out at 8+ feet long, 1 at 6 ft. 10 inches and 1 short 4 ft. 2 inches. All heartwood with moisture content of 9%
RBI Model 820 or 20 inch planer with 2 new sets of blades, sanding drum attachment with 4 rolls sandpaper, gang saw attachment, new belt, variable speed automatic feed attachment and 5 HP motor
Makita 10 inch compound miter saw works great
Nice roll around cabinet with 2 shelves
Craftsman Oscillating spindle sander with 20 assorted sanding sleeves, less table
Craftsman 2 inch x 42 inch belt and 8 inch disc sander with new belts and discs, less table
Craftsman Model 102 6 inch jointer with 1 set of new blades, includes stand, made about 1948, works great
11 board feet of SPALTED BUTTERNUT, 2 INCH THICK BY 9 FT. LONG, 7% MOISTURE, HARVESTED ABOUT 600 FEET FROM WHERE IT IS DISPLAYED
2 Vintage pitch forks - 1 four prong and 1 three prong, purchased from Scarcliff Hardware in Holden, Mo. 1950
6 shelf really nice cabinet with doors and a 15 cubby hole cabinet included
Vintage sled in good condition from the 1950's, seller used it personally
Heston and Anderson wood lathe made about 1946, modified to turn up to 11 inch stock, variable speed by belt and pulley, 2 sets of turning tools with wood bench included
Dewalt DW672 offset trim router
Milwaukee Magnum hammer drill 1/2 inch, new never used
2 Sanders, 1 Skill mod. 490 and Dewalt DW 412
Craftsman Industrial plunge router 3-1/2 HP with 1/4 and 1/2 inch collets
New, never used Porter Cable router Model 6902, 1/4 inch and 1/2 inch collets
Craftsman Commercial router with case and guide
Delta Jigsaw
Craftsman Model 315 3/8 inch drill
Rotozip Spiral saw with several pkgs. of new cutters
Servis 1/2 inch electric drill, single speed
2 Bosch Corner sanders Model B7000 with a pail of new sanding discs
Bosch Pneumatic stapler Model S32sx 1/2 inch - 1-3/8 inch
Craftsman variable speed scroller saw works great
Dewalt orbital sander Model DWE6421
2 Pneumatic brad nailers Models BT50B and Model BT35B
Columbia Model 9650 6 inch bench grinder 1/2 HP
Stanley Bostitch Framing nailer pneumatic, uses 2 inch thru 3 inch nails
Power Kraft JIG SAW works fine
Porter Cable Model 511 Cylinder lock boring kit, brand new never used with case
Brand new SCHLAGE Model 40-056 Boring Jig kit, never used with case
Ethan Allen table with 2 benches (1 bench stripped), good shape purchased new
Dewalt Model DW 317 Jig Saw, only used a few times
Porter Cable cutout tool with new bits
Porter Cable finish trim saw
Bostitch Pneumatic Trim Nailer Model N60FN great shape
Ryobi Laminate trim router Model TR 30U
Model 77 - 7-1/4 inch geared skill saw
Porter Cable orbital sander Model 333 with box and new pad
Model 77 - 7-1/4 inch skill saw
Dewalt Model DW471 7 inch grinder
Makita 3 inch belt sander, box and 2 boxes of belts
Porter Cable 333 orbital sander, box, new pad and new pad screws
Bosch Model B7250 orbital sander
FEIN Model 9.55.13 1000 watt auxiliary tool control Vacuum with box of new bags, lets you run wood tools inside without dust
Dorm size refrigerator, works great, been plugged in for about 2 months
Purple Heart wood 10-3/4 inch wide x 8-1/2 feet long x 3/4 inch, 9% moisture, 7+ board feet
Pecky Cypress 1 inch thick, 6% moisture, 8.33 board feet
Marshalltown 12 inch laminate floor cutter, works great
7-1/4 inch skill saw Model 574 works great
Ryobi Variable speed Mini Lathe, turns stock up to 18 inch long
Wilton 4 inch bench vise, like new
Craftsman 20 inch scroll saw, blades in compartment on saw, Contractor Grade
Black and Decker Workmate Model 400 good condition
Craftsman 6 inch belt sander made about 1948, with belt and several 8 inch discs, works great
3 adjustable floor standing rollers for catching material from planers, table saws etc.
Craftsman 12 inch Band saw with 12 new blades, purchased new about 1979
7 Vintage yard sticks
Seymore bush Scythe with a RIXFORD blade, about 90% of its metal remaining, most of its original red paint, made about 1949
Skilsaw 10 inch portable compound table saw
Craftsman Compound table saw made about 1950, very smooth, table tilts for angles, runs like new
4 antique Singer sewing machine side drawers, great shape with finger handles and decorative designs, 13 inches long x 3 inches deep x 4 inches wide
Bostitch Oil less compressor 2 HP Model CWC200 WT
6 vintage hand saws with fair condition, most are Disston
Baldwin Model 7 Polished stainless steel door pulls, 5 total, 4 inches wide and 16 inches long
Antique hand forged Hay hook and pry bar, trowel, garden tool and wood chisel
3 Baldwin brass door pulls + 6 Baldwin brass door push plates all new
Antique wooden pulley, double iron pulley, metal window scraper, wooden mallet
Antique 2 hand forged clevises, Saw set tool, and antique 1920's spark plug sockets
Weed Brand Horseshoe pulling tool 1913, Hoof trimmers, spring loaded trimmers, and a vintage set of UTICA Cyclone fence pliers
2 vintage drill braces
2 vintage hand sickles
Vintage AX heads and 1 vintage ax with modern handle
Vintage Diamond forged Monkey wrench, 1 pair of horse hair shears, large tin snips and 1 pair of offset pruners all vintage
Craftsman 1950 made 1/2 inch bench drill press with floor stand, drill bits, cutting oil
12 inch miter saw blades some new and some sharp
5 new 10 inch saw blades
5 new 10 inch miter saw blades with 17 blades some dull some sharp, even some 8 inch
Antique Disston large miter saw with strong back for riding in a jig
12 vise grip wood clamps various lengths and 2 hand clamps
Antique copper head soldering irons, very rare, really hold the heat, great shape
New FELKER 10 inch Diamond blade for cutting stone, granite etc.
11 new 7-1/4 inch skill saw blades
5 new packages of various grit sandpaper
Roll around cabinet with 48 cubby holes and 1 open top shelf
Craftsman shaper with 26 various cutter heads, complete new spindle assembly included, great for small wood shop
Craftsman Router table with a 1/2 HP craftsman router attached, laminated extensions on both ends
Craftsman digital Plunge router 1/4 inch and 1/2 inch collets, brand new in sealed box, purchased about 25 years ago as a spare
FREUD DADO cutter 8 inch - 1/4 inch thru 13/16 range, cuts smooth
Craftsman fixed base router with 1/4 and 1/2 inch collets, new still in sealed box
Another new old Craftsman router, same specs as lot 102
Makita 3 inch portable planer with guide and case
Craftsman Multipurpose fence guide system and 2 straight line guides to rip crooked lumber, all brand new never opened
4 brand new boxes of 1-1/2 inch sand paper, 80-120-240 & 320 grit, 50 yds per box
Porter Cable Plate jointer with 4 containers of biscuits, used only one time
4 vintage Disston hand saws, 1 newer Disston about 30 years old
1 full box of cedar planking and 18 separate cedar planking new pieces
Wood Tek floor mounted drill press, variable speed, 1/2 inch chuck, with 4 Rosette cutters, 1/2 inch drill index and cutting oil, purchased new in 2007
18 boxes of 3 inch sanding belts, various grits, Porter Cable
4 - 36 inch Jorgensen wood clamps and 1 Pony 1/2 inch pipe clamp
Various router attachments and 8 corner and straight frame clamps
1 new 16 piece set of DIABLO SPEEDMON spade bit set
4 combination squares and 2 additional squares
1 Dowel Jig tool, 2 small levels, 3 Yankee screwdrivers - 2 small and 1 rare large one, all work fine
1 RABONE angle square, 16 inch square, 12 inch square, and a RABONE Wood and brass adjustable inlay Chesterman mortise marking gauge - both Rabones vintage and like new
5 C clamps and 2 quick set clamps
1 antique CHATILIONS IMPROVED SPRING BALANCE 50 LB. SCALE, 1 antique valve lockable compression tool and 1 valve grinding tool with a valve set tool
1 Craftsman vintage Molding head new in the box, 1 vintage Drillsaw kit, and 1 new set of FMT 1/4 inch to 1 inch countersink set - brand new
Coping saw and 2 Disston trim saws, 1 is offset for flush cutting in the case
Craftsman router circle cutting jig
Vintage Stanley Brace and a 10 piece set of auger bits
1/4 - 1/2 inch drill bits all great shape with most made by Silver and Deming 1/2 shank
4 vintage large layout squares, layout rafters, stairs, and ridges all very legible
3 Wiss tin snips + 5 assorted sizes of vise grips
12 inch to 4 inch adjustable wrenches - 10 total
3 tin snips and 1 set of 3/8 extensions
Set of Barcalo Buffalo wrenches size 9/16 to 1-1/4 and also 1 - 3/8 inch wrench, purchased from a traveling salesman from New York in 1952 in Cass County, Mo.
8 wood chisels, 4 on the left came from a Western Auto store in Holden, MO. in the early 1950's
Cool vintage wrenches with names such as Herbrand, Fordson, 12 in total, collectors dream
12 more wrenches, several manufacturers
19 Antique wrenches, all open end
5 more specialty wrenches
4 modern Stanley block planes
1 Miller Falls Plane 9 inch vintage
1 Trimont 18 inch pipe wrench from the 1940's, 1 antique Monkey wrench and 1 unknown wrench
1 - 13-1/2 inch Bailey plane, good condition vintage
1 Vintage Victor 12-1/2 inch plane, great shape
1 Bull nose clamp with lead rope, Cowbell with neck strap used on a Hereford named Clarabell in the late 1940's, 1 pill pusher, 1 set of kick chains
Block and Stone chipping hammer & a Plumb vintage brick hammer
3 vintage Lufkin 6 ft. folding rulers, 1 Evans white clad 50 ft. steel tape, vintage
1 antique cleaver, Antique log hewing large chisel, 1 chisel
2 sets of Ice tongs used to load grandmother's ice box in Independence, MO. in late 1940's and 50's
2 meat saws, 1 Disston and 1 Sheffield, used many times to split beef and hogs and quarter them
1 hand brace and 1 shoulder brace, both vintage
Craftsman Mortise and Tenon fixture never used from the 1960's
Craftsman Deluxe Dovetail fixture never used from late 1960's
Compound Radial saw, 2-3/4 HP, 10 inch with stand
1970's Craftsman 12 inch planer with 1 new set of blades, wood stand included
3 Tool boxes with trays
Wood Tek Shaper, 3 HP, flip a switch for reverse, sliding rear table with laminated extensions, 40 shaper bits and router bits, style and rail cutters and 12 various bushings, purchased new in 2007
Craftsman 6 inch grinder with floor stand
3 HP 6 inch Sawdust Collection system, 220 volt, with push button switch
Jorgensen 4x7 wood vise with quick release, needs removed from bench
Jorgensen 4x10 wood vise with quick release, screwed to bench
2 Meat hooks used to hang meat for cooling in the 1940's and 50's
40 pounds of 9x3 and 10x3 and 10x3-1/2 inch wood screws plus several boxes of other screws, all new in boxes of 100
300 new Tapcon screws with bits and driver, 18 boxes of various sheet metal screws and wood screws, all brand new
9 boxes of 75 sheet metal screws and 8 kits of screws, spring pins and more, all new
3 new rolls of Caution tape, Electric underground tape, and water line below tape, 1 new package of Frog tape 2 inch, 4 - 2 inch duck tape rolls
6 new boxes of Hillman 6 inch gutter screws and spacers
Real Govt. Surplus ammo cans like new, 5.56 and 30 cal. cans
1 case of 12 hand sanitizer, 3 tubs of lubricated hand towels, 1 large bottle of Orange cleaner
3 gallons of WD-40, 4 gals of WD-40 rust remover, all new and never opened
6 dozen safety glasses, clear and smoke, and 400 pair of new ear plugs
6 bottle jacks, 2 scissor jacks
1 Gundalach 12 inch VCT tile cutter with rollers for easy moving
Stihl 044 chain saw with 30 inch bar and a new 36 inch bar with chains, runs great
Stihl 029 chain saw with 20 inch bar, new chains (dull and sharp), runs great
Echo 12 chain saw and Poulan S25 AV chain saw, both were running great, comes with a few chains
Stihl AHS 80 leaf blower, works fine
5 plastic gas cans
Stihl MS194T 12 chain saw, used only 2 times, like new, bought in 2023
12 Wood boring bits, mostly Milwaukee
Stihl HS80 shrub trimmer, runs great
5 full gallons of Stihl bar oil and 3 new six packs of gas mixture for Stihls
Pex crimping tool in case, used only 1 time
27 hole saws with adapters and arbors, includes tool box, 1 inch to 6 inch
Greenlee 7 piece set of wood boring bits in case, set of Lenox hole saws
Dayton Electric soldering gun and Milwaukee variable speed 3/8 inch drill
20 - 18 inch auger bits, from 1/2 inch to 1-1/4 inch, several are new with tool box
4 new sets of Tapcon kits
1 MC Acetylene tank and turbo torch kit with tool box + 1 new 12 inch turbo hose and several sizes of tips and soldering iron
1 new fiberglass deep sink with legs and new faucet with box included
5 plastic gas cans
5 plastic gas cans
120 Fernco couplings sizes 1-1/2 inch through 6 inch, all like new, also 95 shielded couplings 1-1/2 inch to 4 inch all like new with clamps
5 rubber test balls and a few ADS couplings
4 swivel sheet rock sanding poles, 1 hand sander and 4 mud pans, 1 spud, 1 electric drill mixer and 5 pkgs of sanding screen
1 Ridgid 2-1/2 thru 4 inch geared threader, Model 4PJ, almost new teeth, with Ridgid Flex drive shaft
1 Dewalt sheet rock screw gun
Milwaukee Sawzall and case
1 Milwaukee 1/2 inch right angle drill and case
Makita 12 inch chop saw with 6 new blades
Olympyk 14 inch quickie saw with 16 new blades for steel, stone and concrete
Milwaukee 1/2 inch drill and hammer drill w/case
Milwaukee 1/2 inch drill and hammer drill w/case
Remington Model 400 power tool w/case and hundreds of nails and loads
Milwaukee 4 inch grinder
Milwaukee 1-1/2 inch hammer drill with full set of bits + 1 - 2 inch core bit
Mystery tub of goodies, take a gamble
Greenlee MC cable dispenser, works great and no more tangles
Tote packed full of painting supplies, several Purdy brushes (new and used), pans, and lots of other tools
Mystery tub
3 plastic kerosene cans and 2 gas cans
Milwaukee deep cut Band Saw with case and 36+ new blades
Makita 3 inch grinder with new discs and case
Milwaukee Sawzall w/case
Milwaukee 4-1/2 inch grinder
Makita 7 inch grinder
1 Portable air bubble
1 Portable air bubble
1 - 4 ft. manhole cone bar and 1 barrel bar for 4 ft. manholes, 6 ft. cable choker, with 3 new web chokers still in package
Ridgid 400 A threader with Ridgid oiler and 2 gallons of cutting oil
Ridgid Model 450 chain vise for up to 5 inch pipe, like new
Coleman power mate 1000 watt generator
Wisconsin 1-1/2 inch water pump with 25 feet of suction and 25 feet of discharge hose
Makita 10 inch miter saw
Dewalt hole hog drill right angle w/case
GE 3 pole 60 amp safety switch fusible, 2 Eaton 2 pole 100 amp safety switches fusible, 1 - 1/4 HP Dayton electric fan motor, all new
2 Cutler Hammer 30 amp Double throw transfer switches new, 1 Milbank 3R RT enclosure with cover and 5 bottles of pulling lube
13 rolls of Scotch 88 tape, several rolls of Scotch 33 tape, 2 boxes 2200 mastic pads, hundreds of yellow and red wire nuts, several Westinghouse double pole breakers, 3 - 70 amp main lug disconnects,
1 case of 175 watt dusk to dawn bulbs, 2 Tripp Lite power bars, 1 case of Satco 120 volt 9.5 watt LED bulbs, 1 case of Satco 15 watt LED bulbs medium base, 2 - 125 amp main lug disconnects + more
1 Hydraulic Oil pressure pump and 3/4 inch punch for steel, 2500 PSI
Ridgid 12R threader with 1/2 inch thru 2 inch dies
11R Ridgid threader with 3/8 thru 1-1/4 inch dies
Ridgid 36 inch aluminum pipe wrench
Ridgid model 4-8 2 inch to 4 inch heavy duty pipe cutter
36 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
30 inch HK Porter bolt cutter
Tyler 20 inch electric wire cutter for copper and aluminum up to 4/0
30 inch Greenlee electric wire cutter for up to 500 MCM copper and aluminum
3 - 3/8 inch load binders and 3 - 5/16 load binders
1 new and 1 used Ridgid drop head toilet augers
3 long cable drill bits, 6 ft., 54 inch, and 24 inch
2 Ridgid 2 inch pipe cutters
1 RIDGID 4 wheel pipe cutter for where there is very little room to cut pipe
10 fuse pullers, from 200 amp to 12 volt mini fuses
Ridgid inside pipe cutter, from 2 inch to 4 inch
2 Ridgid tubing cutters up to 2 inch and 1 Ridgid ratcheting tubing cutter to 1 inch
1 Ridgid plastic pipe cutter, 1 - 2 inch tubing cutter and 1 - 1 inch tubing cutter Ridgid
3 Flare tools - 1 real nice Ridgid and 2 others
2 Ridgid 24 inch pipe wrenches, 1 aluminum 18 inch pipe wrench
1 Diamond chain wrench, 1 Fuller 24 inch aluminum pipe wrench, 4 other pipe wrenches
3 Ridgid pipe wrenches and 1 auto adjust
4 - 1-1/8 inch to 1/8 inch tubing cutters
1 grappling hook, 2 new mole traps, 1 after market havens grip, and 2 very rare real Havens grips 2 sizes
2 cable jacks with 1 set up with 2 pulleys
2 cable jacks and 1 ratcheting fence stretcher
15 plastic pipe saws with 5 new
2 pneumatic paint pots, 1 Develbiss and 1 NAPA
Lots of grinding discs and cutting discs, 7 inch, 4-1/2 inch, 4 inch, 3 inch +++ with most of the 7 and 7-1/2 inch tapped 5/8 inch
GMC grill for a 2007 Envoy, in great condition
22 piece box end and open end set of wrenches, AIGO brand, used these wrenches for over 60 years
4 EMT conduit benders 1/2 inch to 1 inch
10 pad locks and keys with 4 that can't be cut with bolt cutters
2 fiberglass grade sticks, both 25 feet, 1 in 10ths and 1 in inches
10 flexible gas connectors in various lengths
2 liquid transfer pumps, 3 gals per stroke
20+ Kellems in almost every size
15 piece wrench set, AIGO brand, owned for over 60 years
6 piece set of adjustable wrenches 24 inch thru 6 inch, all name brand
10 Klein Leather pouches of various sizes, all new
3 sets of jumper cables with 1 set 25 foot made out of #4 stranded copper
1 Rust-Oleum Stripe painting machine with 4 cans of paint
1 - 24 inch floor standing fan with a new Dayton motor installed last winter
Several hundred pounds of steel - 1x3x1/4 inch tubing, 1 inch steel pipe, 2x2x1/4 angle, 2x2x1/8 inch angle, 40 feet of 2x2x1/4 tubing, several feet of flat iron x 1/4 inch thick. About 500 lineal fee
2 new tank sprayers both still in the box
1 partial case of Tefla Lube, 8 cans in all
1 case of 6 tubs of Rid O Grime wipes
1 case of 12 Tefla Pent (works better than liquid wrench)
1 - 500 foot roll of #10 THHN stranded wire and 1 - 500 foot roll of #10 THHN stranded wire, both new rolls
1 case of 12 Rid-O-Grime abrasive soap
1 case of 12 Master blaster
1 case of 12 Rid-O-Grime
Another case of 12 Rid-O-Grime
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker 50 watt LED dusk to dawn light
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
1 new in the box Caretaker LED dusk to dawn light 71 watt
2 brand new leather welding protectors - 1 shoulder and arms and 1 leather welding apron, very good soft leather
3 Pneumatic Pressure regulators with oilers
Dozens of Die grinder attachments, all for 1/4 inch die grinders
3 Air tools - 1 3/8 ratchet, 1 butterfly 3/8 inch impact wrench and 1 NAPA 1/2 inch impact wrench
Dayton Electric impact wrench with case and 6 sockets
1 Right angle 1/4 inch die grinder (new), 1 used straight 1/4 inch die grinder and 1 pneumatic weld descaler (never used)
Several sets of impact sockets with 2 sets of deep and tray
3 new plastic parts bins, provides lots of storage
1 Generac High pressure 3000 PSI power sprayer with 6 various tips, 5 HP Honda gas engine
Fastenal Bolt bin with bolts, sizes 1/4 inch to 5/8 inch in all lengths from 1 inch to 3 inch, grade 5 coarse thread, with nuts, flat and lock washers, several hundred pounds plus 3 cubby holes of 1/2
1 Stringer safety pole belt with 2 lanyards
1 Oxygen cylinder
1 Acetylene cylinder
Lincoln wire welder Model 170-T with cart and regulator, hose and tank for MIG welding, several rolls of solid wire and flux wire, 220 volt, uses a double pole 20 amp breaker. Also has 25 ft. extra 10
10 new cans of Flex-Seal
5 good pair of welding gloves and 2 new pair, welding goggles, and welding glasses
2 nice half face 3M masks with gas and organic vapor cartridges, all new, never used
1 new 250 foot spool of 3/8 inch twisted rope, 50 foot of 3/8 inch nylon rope, 1 - 100 ft. new 3/8 inch twisted rope and 50 foot of 1/4 inch nylon rope, all brand new
10 piece new set of soft finish WIHA screwdrivers
14 piece set of new WIHA Insulated Screwdrivers
Vintage orange handled SNAP ON Screwdrivers purchased in 1990 from Snap On truck in Canton, Mo., also includes a rare SNAP ON 18 inch pry bar
2 ratcheting SNAP ON screwdrivers with bits in handle, purchased 1990, rare find
2 rare SNAP ON screwdrivers with pistol grip color
3 Partsmaster ratchets 1/4, 3/8 and 1/2 inch, all extendable, new
32 piece 1/4 inch socket set, purchased from SNAP ON truck in Lee's Summit, Mo. in 1968
Another new set of Partsmaster ratchets extendable 1/4, 3/8, and 1/2 inch
Great vintage SNAP ON tools set - 38 bits, 10 piece 1/4 inch socket set, 4 long bits, with case and ratcheting screwdriver
Possibly the best made set of various pliers by KNIPEX
WIHA new tools set - set of security bits with case and ratcheting handle (36 bits), 1 set of miniature nut drivers, 8 piece set of precision hex drivers and set of 8 precision Torx drivers, all new a
Set of ratcheting electric wire cutters, Model B97-1383, cuts up to 250 MCM copper or aluminum, Klein tool
1 set of WIHA nut drivers all brand new, 11 piece set
2 very rare items - 1 vintage set of blue SNAP ON picks with plastic case bought in 1969 (never used) and 1 rare set of miniature WERA T handled Torx drivers made in Czech Republic
1 - 8 piece set of new insulated Allen wrenches 1/8 inch to 1/2 inch, by WIHA
1 - 10 piece set of KLEIN Journeyman Hex key wrenches with both T handled and 90 degree Allens, 1/8 to 3/8 but includes 1/2 inch also, with steel stand
Same as lot 320 - KLEIN Journeyman Hex key wrenches set
1 new 44 piece set of 1/4 inch sockets and tools with case, Westward brand
5 individual items - Gear wrench mini screwdrivers, Brownell miniature screwdriver set in wooden box, Craftsman Calipers, Irwin bolt extractors, Century bolt extractors
Craftsman collectors - Vintage miniature tool set in a nice leather case, new
Dewalt new set of bits, nut drivers, drill bits, 1/4 inch extensions
New Gear Wrench reversible ratcheting nut drivers with handle
New in the box KRIEGER 2000 watt inverter, clamp to 12 volt battery to get 110V
4 tools, all new but most vintage - Pop rivet gun and rivets, Klein Screwdrivers, Craftsman 1/4 inch socket set, Hitachi 40 piece bit set
6 new Gear Wrench long needle nose pliers, hinged centers
Westward new set of 1/2 inch socket set in Metric
Set of Continental used tap and die set, a very unusual and large set
New set of Irwin tap and die set, with 2 separate die handles
Unusual set of bits by IFIXIT new, Minature tool set, new Stanley 25 ft. tape
New Rock River mini screwdrivers, 9 new 3/8 inch drive hex bit set, and a rare Craftsman drill bit set with all bit sizes 1-60 in a self positioning case
General ratchet bit set, Vintage Stanley 100 ft. steel tape, Vintage White Clad 100 ft. tape, Klein strippers, and a rare set of SNAP ON pipe extractors
Set of Orifice drill bits with case, 1 set of Ridgid Pipe extractors (vintage), 1 very rare mini drill bit index and an Irwin bit set (new)
WIHA bit set - anti static, new and 2 new Irwin multi bit sets with a bit set
New Amazon Basic tool set, 151 piece, also 1 new HK Porter wire rope and cable cutter, new Lenox step bit
Century tap and die set (used), Mechanics plier set, 1 HUOT tap and drill set
Tap and die set used, New HUOT tap and drill index and new Westward tool set
Test equipment lot - capacitor tester, gas leak tester, 6-way voltage meter, wire tone tester up to 1000 feet, amperage tester, polarity tester, gas pressure tester and more. All tested and work fine.
New Jobber drill bit set up to 1/2 inch, Very rare Starrett punch set in wooden case
New Irwin bit set, 2 Lenox new step bits, new General miniature screwdrivers
New Westward mini pliers, 1 new Klein mini bit set, 1 set of screw extractors
New Dewalt 1/4 inch socket set and new set of 3/8 drive hex bit set in cases
1 new Lenox fat boy torch set in case, purchased about 2008, Pristine
New Dremel drill set with case and 1 new Dremel accessory kit
Rare Mini tool set in leather case - new but a little rust on some tools, case faded, Vintage Craftsman
New Westward 172 piece bit set, Dewalt
6 various hand tools with 2 new Dewalt ratchets 1/2 and 1/4 inch
New in cases Dewalt 1/4 inch socket set with 1 new set of 1/4 inch deep sockets
New Lincoln battery powered grease gun with case, never used
Rare socket set by WILLIAMS - bolt thru set, brand new with case
Snap On collectors - purchased 1990 screwdriver set, plus a bonus 1 vintage Snap On 7/16 inch wrench
2 New Makita tool sets with cases
1 Craftsman vintage socket set, also a vintage SK Wayne socket set with a Craftsman ratchet size 3/8
Blackburn Model OD Wire splicing tool with several boxes of crimps and sleeves, with all 3 dies attached, insulated handles
Nicopress compression tool + 2 boxes of crimps
Nicopress compression tool + 2 boxes of crimps - crimps are stronger than the actual wire, great for splicing barb wire and woven wire
New Fluke 333 Clamp electric meter
New Fluke 333 Clamp electric meter
New Ideal Electric clamp on meter with case
New Fluke 323 clamp on meter
New Klein CL800 clamp on meter
New Fluke 373 clamp meter
2 sets of 2 new Dewalt 12 foot ratchet straps
1 new Klein needle nose pliers, new set of Klein insulated screwdrivers with case, and a new set of drills
1 set of rubber insulated to 1000 volt gloves, made in 2021, used only 1 time, comes with all three layers and bag, size 9 by National Safety
6 pair of assorted Gear wrench long pliers
7 various pliers and tools, all high end
9 Chalk lines with one new
9 new Dewalt various bit sets, all pristine
2 sets of Greenlee Punch sets in leather cases, brand new in the box, 1/2 inch thru 2 inch
3 Greenlee punch sets that have been used, 1/2 inch thru 2 inch
4 Milwaukee bit and drill set kits new
3 Milwaukee new bit and driver sets
New Gear wrench Ratcheting nut driver set metric and SAE
3 new Milwaukee bit sets and 1 used drill bit set
4 new Milwaukee bit and nut driver sets
3 new Milwaukee bit sets
3 new Milwaukee bit sets
2 new Milwaukee bit sets and 1 new Milwaukee drill bit set
2 vintage Craftsman 1/4 inch socket sets, Metric and SAE + 18 individual wrenches several vintage, with some Williams
10 SDS masonry drill bits, 9 new and 1 used, by Dewalt
5 new 5 gallon potable water jugs, never opened
60 ft. of 1/2 inch O.D. copper
49 ft. of 5/8 O.D. L copper
Used Rebar bender and cutter, works great for small bending projects
3 brand new 25 ft. trouble lights
100 ft. of 5/8 O.D. K copper
42 ft. of 3/4 inch I.D. K copper
2 lug wrenches, 1 for small lug bolts and 1 for heavy truck, along with 5 various tire tools and 2 peewee lug wrenches
10 Drawer Map cabinet with ball bearing drawers, lined drawers, screwed to wall
1000 zip ties from 4 inch to 18 inch, 10 pkgs never opened
5 various basin wrenches and lengths, 1 spud wrench and 2 seat wrenches
New 8K piece Heavy duty screwdriver set by Partsmaster
2 new in the box ISOBAR Tripp Lite power bars with 3840 Joules surge protection
4 various pipe wrenches and 1 Ridgid 18 inch offset pipe wrench
5 - 6 inch thru 15 inch adjustable wrench set
2 JCM ratchet wrenches and 11 other wrenches
5 vintage adjustable pliers, work really well
1 small HK Porter bolt cutter, 2 claw hammers (Stanley and Estwing) and a man hole pry bar by PROTO
9 assorted pliers and vise grips, all good condition
14 scissors with 2 new tire plug punches and kits both new in blister packs
4 strikers, 3 wire brushes all new, flat bar
1 - 24 inch ball pein hammer, claw hammer, plastic mallet and 1 hatchet
6 assorted pump pliers
8 various hand garden tools
2 - 4 ft. empire levels, 1 - 3 ft. level and 1 hacksaw
1 set of new Gear wrench combo wrenches, 1 used set of Craftsman nut drivers, 2 new Stanley 25 ft. tapes
New set of 10 Partsmasters screwdrivers, 1 Klein new cutters and 1 new set of Rock River nut drivers
1 new set of 5/16 to 15/16 wrenches Westward, 1 new 25 ft. Stanley tape
New Bostitch hex drivers, 1 Klein ratcheting bit set, 5 piece set of Klein screw holders in case, and set of Stanley tools
New Westward nut driver set, and a new Gear wrench combo set
Best made tool set by XCELITE - a service master set
8 various tools - tin snips, hoof trimmers, and tile nibbler
Set of ARMSTRONG offset wrenches (3/8 to 3/4) and a new set of EKLIND ball hex key tools
Rare screwdriver set by Felo Rgonic made in Germany with case, highly rated as high end
6 Wiss sheet metal tools - snips, crimpers, circle cutters etc.
2 hacksaws, 2 coping saws, and 1 miter saw
5 bow saws with 8 new blades
New set of Ideal nut drivers, and a new set of Gear wrench combos SAE
2 new sets of Crescent wrenches with ratcheting base and sockets
New set of Bondhus ball hex drivers, Craftsman bit set, 3 shorty craftsman box end wrenches and 2 distributor wrenches
Large lot of Vintage car buffs tools - Ring compressor, compression tester, feeler gauges, spark plug gap tools and more
New Craftsman box end set 1/4 inch drive set, drill gauges and squares
1 set of Craftsman Tappet wrenches, 4 adjustable wrenches, 1 Craftsman mini screwdriver set
1 Vintage Sunex metric wrenches with case - 14 piece, only used rarely
New Craftsman 6 piece quick wrenches and a new set of extended reach quick wrenches by Craftsman
2 new Craftsman wrench sets, Ratcheting Craftsman wrenches, 4 piece set of Power Torque wrenches (each wrench fitting 3 different size nuts), all vintage
7 new sets of economical tools
11 new sets of various economical tools with 3 new rolls of duck tape and 1 partial roll of white duck tape
Diamond chain wrench, strap wrench, Ridgid meter wrench, Dewalt knife and 1 Irwin auto pipe wrench
6 tapes, 2 large rasps, 6 wrenches
4 new Mapp gas cylinders with a new auto light torch all new
4 new Mapp gas cylinders with a new auto light torch all new
6 Ridgid flare tools 3/4 inch to 2 inch and 2 plastic tubing cutters
8 adjustable pliers, 1 MC Cable cutter with 3 new wheels, 1 set of Allen wrenches
6 new tapes and 100 zip ties
4 - 9 inch torpedo levels, 1 new Stanley Fat Max torpedo level, 2 post levels
8 new rolls of tie wire
5 new 8 inch adjustable wrenches, 6 adjustable 6 inch wrenches, 1 Craftsman stud remover, 5 piece set of 8 point sockets with 1/2 inch drive for square nuts
3 new Potable water jugs never opened
Mystery tote full of goodies
Gold Foundry winch with 50 ft. of 3/8 cable and hook, 2 speed, purchased from the foundry in Independence, Mo. in 1990
1 bucket full of invert floats, trowels, and lots of concrete tools
2 antique Coal Oil cans (1 has no bottom), and 1 Mobil vintage metal gas can
2 toe lift sheetrock tools, and 4 sheetrock key hole saws
3 Gear Wrench adjustable pry bars, never used
1 Ford tapping tool fits 3/4 inch flare and compression corps and also 1 inch flare or compression corps
1 new in the box Pristine copper jumper cables
1 Vintage Magnavox Model 1500 receiver and 1 vintage Magnavox 8 Track recorder, both power up fine, purchased at Bob Johnson appliance in Harrisonville, Mo. in the 1980's
True Craft 3/4 inch socket set, 7/8 thru 2-1/4 inch, complete set with extras, used over 60 years, several extensions in original metal case
225 amp AC DC welder with 100 ft. of stinger and 100 ft. of ground, welds nice and smooth
MC Acetylene Air gas bottle with turbo torch and various tips and soldering iron
