Machine Shop Liquidation On Site Online Only
Listing ID#: 125529

Sale Location

North Canton, OH 44720
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Friday May 26
Bidding Ends: Monday Jun 12
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
David Dangerfield, Auctioneer

Contact: David Dangerfield
Phone: 330-518-5881
Email: dave.dangerfield@yahoo.com
Website: www.dangerfieldauction.com

EstateSale.com ID#: 5673
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
All items sold as is where is. All purchases to be removed at designated pick up times, unless prior arrangments have been agreed upon by auction firm. PURCHASER IS RESPONSIBLE FOR DISASSEMBLY AND REMOVAL OF EQUIPMENT.

On-Line Only Auction Terms & Conditions

Upon registration, the Bidder warrants that they are of legal age and have read and understand the terms and conditions as listed and that such terms shall govern this auction sale.

1. All Bidders must first complete the New Bidder Information form as provided. All Bidders are required to provide valid credit card information in order to register for this auction. Buyers premium will be added to your final bid. YOUR CREDIT CARD WILL NOT BE CHARGED UNLESS YOU ARE THE SUCCESSFUL BIDDER.

2. Throughout the auction process Bidders are encouraged to check their bids often in order to ensure success. Bidders may also choose to receive e-mail notifications when Outbid on an item. These notifications will not be sent out during the final two hours of the auction sale.

3. Bidders have the option of setting a maximum bid amount allowing the auction software system to automatically bid on their behalf to the next highest bid increment.

4. All items are always sold UNRESERVED unless specifically mentioned in the item description.

5. Soft Close: In the event that a bid is placed on an item in the final minute of the auction sale, the auction for that item will automatically be extended and remain open for an additional 3 minutes. This will continue until all bidding has ceased.

6. Although the auction company makes every attempt to ensure that all items are authentic and that all photographs and descriptions are accurate and error free, no sale shall be invalidated by reason of any defect or inaccuracy in the description or photo provided. Photos used in the Auction catalog on occasion may be that of duplicate lots or of similar or equal items as seen and found on the internet. Preview times are offered and all Bidders are encouraged to take advantage of the preview times in order to thoroughly inspect all items to their own satisfaction. For some items, coin or currency may be used for scale only and are not included in lot. ALL ITEMS ARE SOLD AS IS, WHERE IS.

7. The highest Bidder shall become the Purchaser and no Bidder shall retract his / her bid at any point throughout the auction sale. Upon award of the successful bid, the Purchaser will receive an invoice via email within 24 hours of the auction close. Full payment for all purchases is required on the day of the auction sale and will be charged to the credit card provided. A 15% buyer's premium plus Handling Shipping Transportation, (if applicable) will be added to the purchase price of all items sold at the auction. Failure to provide full payment using the credit card provided or to arrange alternative method of payment during allotted pick up times may result is suspension of bidding privileges.

8. Pickup and Removal: All items must be removed on the dates and times as provided. Items not picked up after 3 days will be considered abandoned and the Auction will dispose of or resell the items at the Purchasers sole risk with no refund provided. Any items that must be removed by the auction company on behalf of the purchasers may incur additional charges for moving and/or storage. In the event purchaser has requested shipping and obtained approval of auction company to do so, a $5 handling/transportation charge may be added to the invoice and shipping will be provided by an independant shipper at the purchasers expense, and will be a separate and additional charge from the auction company.

9. Purchasers are responsible to bring any necessary tools, packing material or additional labor in order to remove purchased items. Note: Any damages caused to the property by the Purchaser or agents acting on behalf of the Purchaser during removal of the items, will be billed to the Purchaser and added to the Purchaser's credit card.

10. The catalog listing may be subject to deletions at any time throughout the auction process. In the event that the auction company is unable to deliver any awarded lot(s) as a result of theft, damage, or for any reason whatsoever, the auction company sole liability shall be the return of any monies paid on such lots.

11. By his/her purchase, the buyer waives any claims for liability against either the auction company, its related organizations or the consignor of the item or service, arising in any way whatsoever including, but not limiting the generality of the foregoing, any liability resulting from the utilization of the property or services sold or from failure of the goods to match the provided descriptions.

12. The auction company and their employees are not liable for any loss, damage or accidents that may occur on the auction premises.



Bid Increments

1.00 up to 49.00
5.00 up to 95.00
10.00 up to 490.00
25.00 up to 1975.00
50.00 up to 4950.00
100.00 over 5,000.00
Listing Information
Online only auction held on site, machine shop equipment, tools and miscellaneous.

1
Hardinge Lathe Model DSM-59
Series G36 includes some tooling, must be diassembled

2
Warner & Swasey No. 4 Turret Lathe
M-1420, serial # 69229, includes some tooling, must be diassembled

3
Enco Drill Press
5/8" chuck, model 125-1170, serial# 15339, includes tool vise.


5
Jet Belt Drive Lathe
1340 PBD, stock number 321334, serial # K86-11-193, includes some tooling, must be disassembled

6
10" Industrial Bench Grinder
Model CBG10000L, 1750 RPM, single phase with stand


8
Warner & Swasey No. 3 Turret Lathe
M-1200, lot #399, serial # 1309769, with DRO, includes large lot of tooling, must be disassembled

9
Enco Lathe Type 110-2073
Includes some tooling.



12
DoAll Surface Grinder with Bench
With magnetic chuck, includes some tooling

13
K&F Drill Press
5 Speed, model # KF13, 5/8 chuck, 1/2 HP





18
Shelf Lot, 72 Bins of Assorted Hardware
Screws, washers, hardware, miscellaneous items, includes shelving.



21
Drawer Contents
2 drawers of shop parts and tooling

22
Drawer Contents
1 drawer of collets

23
Drawer Contents
1 drawer of chucks, electrical items and tools

24
Drawer Contents
1 drawer of cutting toos

25
Drawer Contents
2 drawers, electrical parts, tooling, grinding and drill bits.

26
Drawer Contents
2 drawers of drill bits, files and Allen wrenches

27
Drawer Contents
1 drawer, tooling, drill bits and cutting heads

28
Enco #30 Mill and Drilling Machine
model number 105-110, includes table and some tooling.

29
Warner & Swasey #2 Lathe
includes some tooling, m-1330, serial # 982431

30
Bridgeport Series 1 Milling Machine
with serve power feed, serial # j45678

















47
Lot 3 Chucks
6 1/2" 3 jaw, 8" 3 jaw and 8" 4 jaw


49
Lot of Misc. Assorted Hardware
nuts, bolts, includes part bins


51
Corner Shelf Lot of Hardware
screws, spindles and misc.











62
3 Tool Vises
Includes 2 angle vises, 1 tool vise














76
Lot Under Tool Bench, Front Room
Hoses, Tooling, Air Tank



79
Lot of Tools
Hand Tools, Come a Long, Vise




83
Large Double Cabinet Lot, Contents and Cabinets
Generators, grinding discs, various tools, incudes entire contents and cabinets. Cabinets are connected together and may need disassembled.

84
Front Room Corner Lot, Tooling & Cabinet
Includes some scrap metal, car stands and cabinet.








Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Machine Shop Liquidation On Site Online Only

David Dangerfield, Auctioneer

David Dangerfield, Auctioneer


Contact: David Dangerfield
Phone: 330-518-5881
Sale Location
1991 Jaquelyn Dr.
North Canton, OH 44720
Sale Dates and Times
Sale Terms and Conditions
All items sold as is where is. All purchases to be removed at designated pick up times, unless prior arrangments have been agreed upon by auction firm. PURCHASER IS RESPONSIBLE FOR DISASSEMBLY AND REMOVAL OF EQUIPMENT. On-Line Only Auction Terms & Conditions Upon registration, the Bidder warrants that they are of legal age and have read and understand the terms and conditions as listed and that such terms shall govern this auction sale. 1. All Bidders must first complete the New Bidder Information form as provided. All Bidders are required to provide valid credit card information in order to register for this auction. Buyers premium will be added to your final bid. YOUR CREDIT CARD WILL NOT BE CHARGED UNLESS YOU ARE THE SUCCESSFUL BIDDER. 2. Throughout the auction process Bidders are encouraged to check their bids often in order to ensure success. Bidders may also choose to receive e-mail notifications when Outbid on an item. These notifications will not be sent out during the final two hours of the auction sale. 3. Bidders have the option of setting a maximum bid amount allowing the auction software system to automatically bid on their behalf to the next highest bid increment. 4. All items are always sold UNRESERVED unless specifically mentioned in the item description. 5. Soft Close: In the event that a bid is placed on an item in the final minute of the auction sale, the auction for that item will automatically be extended and remain open for an additional 3 minutes. This will continue until all bidding has ceased. 6. Although the auction company makes every attempt to ensure that all items are authentic and that all photographs and descriptions are accurate and error free, no sale shall be invalidated by reason of any defect or inaccuracy in the description or photo provided. Photos used in the Auction catalog on occasion may be that of duplicate lots or of similar or equal items as seen and found on the internet. Preview times are offered and all Bidders are encouraged to take advantage of the preview times in order to thoroughly inspect all items to their own satisfaction. For some items, coin or currency may be used for scale only and are not included in lot. ALL ITEMS ARE SOLD AS IS, WHERE IS. 7. The highest Bidder shall become the Purchaser and no Bidder shall retract his / her bid at any point throughout the auction sale. Upon award of the successful bid, the Purchaser will receive an invoice via email within 24 hours of the auction close. Full payment for all purchases is required on the day of the auction sale and will be charged to the credit card provided. A 15% buyer's premium plus Handling Shipping Transportation, (if applicable) will be added to the purchase price of all items sold at the auction. Failure to provide full payment using the credit card provided or to arrange alternative method of payment during allotted pick up times may result is suspension of bidding privileges. 8. Pickup and Removal: All items must be removed on the dates and times as provided. Items not picked up after 3 days will be considered abandoned and the Auction will dispose of or resell the items at the Purchasers sole risk with no refund provided. Any items that must be removed by the auction company on behalf of the purchasers may incur additional charges for moving and/or storage. In the event purchaser has requested shipping and obtained approval of auction company to do so, a $5 handling/transportation charge may be added to the invoice and shipping will be provided by an independant shipper at the purchasers expense, and will be a separate and additional charge from the auction company. 9. Purchasers are responsible to bring any necessary tools, packing material or additional labor in order to remove purchased items. Note: Any damages caused to the property by the Purchaser or agents acting on behalf of the Purchaser during removal of the items, will be billed to the Purchaser and added to the Purchaser's credit card. 10. The catalog listing may be subject to deletions at any time throughout the auction process. In the event that the auction company is unable to deliver any awarded lot(s) as a result of theft, damage, or for any reason whatsoever, the auction company sole liability shall be the return of any monies paid on such lots. 11. By his/her purchase, the buyer waives any claims for liability against either the auction company, its related organizations or the consignor of the item or service, arising in any way whatsoever including, but not limiting the generality of the foregoing, any liability resulting from the utilization of the property or services sold or from failure of the goods to match the provided descriptions. 12. The auction company and their employees are not liable for any loss, damage or accidents that may occur on the auction premises. Bid Increments 1.00 up to 49.00 5.00 up to 95.00 10.00 up to 490.00 25.00 up to 1975.00 50.00 up to 4950.00 100.00 over 5,000.00
Listing Details
Online only auction held on site, machine shop equipment, tools and miscellaneous.

1
Hardinge Lathe Model DSM-59
Series G36 includes some tooling, must be diassembled

2
Warner & Swasey No. 4 Turret Lathe
M-1420, serial # 69229, includes some tooling, must be diassembled

3
Enco Drill Press
5/8" chuck, model 125-1170, serial# 15339, includes tool vise.


5
Jet Belt Drive Lathe
1340 PBD, stock number 321334, serial # K86-11-193, includes some tooling, must be disassembled

6
10" Industrial Bench Grinder
Model CBG10000L, 1750 RPM, single phase with stand


8
Warner & Swasey No. 3 Turret Lathe
M-1200, lot #399, serial # 1309769, with DRO, includes large lot of tooling, must be disassembled

9
Enco Lathe Type 110-2073
Includes some tooling.



12
DoAll Surface Grinder with Bench
With magnetic chuck, includes some tooling

13
K&F Drill Press
5 Speed, model # KF13, 5/8 chuck, 1/2 HP





18
Shelf Lot, 72 Bins of Assorted Hardware
Screws, washers, hardware, miscellaneous items, includes shelving.



21
Drawer Contents
2 drawers of shop parts and tooling

22
Drawer Contents
1 drawer of collets

23
Drawer Contents
1 drawer of chucks, electrical items and tools

24
Drawer Contents
1 drawer of cutting toos

25
Drawer Contents
2 drawers, electrical parts, tooling, grinding and drill bits.

26
Drawer Contents
2 drawers of drill bits, files and Allen wrenches

27
Drawer Contents
1 drawer, tooling, drill bits and cutting heads

28
Enco #30 Mill and Drilling Machine
model number 105-110, includes table and some tooling.

29
Warner & Swasey #2 Lathe
includes some tooling, m-1330, serial # 982431

30
Bridgeport Series 1 Milling Machine
with serve power feed, serial # j45678

















47
Lot 3 Chucks
6 1/2" 3 jaw, 8" 3 jaw and 8" 4 jaw


49
Lot of Misc. Assorted Hardware
nuts, bolts, includes part bins


51
Corner Shelf Lot of Hardware
screws, spindles and misc.











62
3 Tool Vises
Includes 2 angle vises, 1 tool vise














76
Lot Under Tool Bench, Front Room
Hoses, Tooling, Air Tank



79
Lot of Tools
Hand Tools, Come a Long, Vise




83
Large Double Cabinet Lot, Contents and Cabinets
Generators, grinding discs, various tools, incudes entire contents and cabinets. Cabinets are connected together and may need disassembled.

84
Front Room Corner Lot, Tooling & Cabinet
Includes some scrap metal, car stands and cabinet.








Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Machine Shop Liquidation On Site Online Only
 Online Only Auction
Sale Date(s)
Bidding Starts: Friday May 26
Bidding Ends: Monday Jun 12
Sale Location

North Canton, OH 44720
Company
Listing Terms and Conditions
All items sold as is where is. All purchases to be removed at designated pick up times, unless prior arrangments have been agreed upon by auction firm. PURCHASER IS RESPONSIBLE FOR DISASSEMBLY AND REMOVAL OF EQUIPMENT. On-Line Only Auction Terms & Conditions Upon registration, the Bidder warrants that they are of legal age and have read and understand the terms and conditions as listed and that such terms shall govern this auction sale. 1. All Bidders must first complete the New Bidder Information form as provided. All Bidders are required to provide valid credit card information in order to register for this auction. Buyers premium will be added to your final bid. YOUR CREDIT CARD WILL NOT BE CHARGED UNLESS YOU ARE THE SUCCESSFUL BIDDER. 2. Throughout the auction process Bidders are encouraged to check their bids often in order to ensure success. Bidders may also choose to receive e-mail notifications when Outbid on an item. These notifications will not be sent out during the final two hours of the auction sale. 3. Bidders have the option of setting a maximum bid amount allowing the auction software system to automatically bid on their behalf to the next highest bid increment. 4. All items are always sold UNRESERVED unless specifically mentioned in the item description. 5. Soft Close: In the event that a bid is placed on an item in the final minute of the auction sale, the auction for that item will automatically be extended and remain open for an additional 3 minutes. This will continue until all bidding has ceased. 6. Although the auction company makes every attempt to ensure that all items are authentic and that all photographs and descriptions are accurate and error free, no sale shall be invalidated by reason of any defect or inaccuracy in the description or photo provided. Photos used in the Auction catalog on occasion may be that of duplicate lots or of similar or equal items as seen and found on the internet. Preview times are offered and all Bidders are encouraged to take advantage of the preview times in order to thoroughly inspect all items to their own satisfaction. For some items, coin or currency may be used for scale only and are not included in lot. ALL ITEMS ARE SOLD AS IS, WHERE IS. 7. The highest Bidder shall become the Purchaser and no Bidder shall retract his / her bid at any point throughout the auction sale. Upon award of the successful bid, the Purchaser will receive an invoice via email within 24 hours of the auction close. Full payment for all purchases is required on the day of the auction sale and will be charged to the credit card provided. A 15% buyer's premium plus Handling Shipping Transportation, (if applicable) will be added to the purchase price of all items sold at the auction. Failure to provide full payment using the credit card provided or to arrange alternative method of payment during allotted pick up times may result is suspension of bidding privileges. 8. Pickup and Removal: All items must be removed on the dates and times as provided. Items not picked up after 3 days will be considered abandoned and the Auction will dispose of or resell the items at the Purchasers sole risk with no refund provided. Any items that must be removed by the auction company on behalf of the purchasers may incur additional charges for moving and/or storage. In the event purchaser has requested shipping and obtained approval of auction company to do so, a $5 handling/transportation charge may be added to the invoice and shipping will be provided by an independant shipper at the purchasers expense, and will be a separate and additional charge from the auction company. 9. Purchasers are responsible to bring any necessary tools, packing material or additional labor in order to remove purchased items. Note: Any damages caused to the property by the Purchaser or agents acting on behalf of the Purchaser during removal of the items, will be billed to the Purchaser and added to the Purchaser's credit card. 10. The catalog listing may be subject to deletions at any time throughout the auction process. In the event that the auction company is unable to deliver any awarded lot(s) as a result of theft, damage, or for any reason whatsoever, the auction company sole liability shall be the return of any monies paid on such lots. 11. By his/her purchase, the buyer waives any claims for liability against either the auction company, its related organizations or the consignor of the item or service, arising in any way whatsoever including, but not limiting the generality of the foregoing, any liability resulting from the utilization of the property or services sold or from failure of the goods to match the provided descriptions. 12. The auction company and their employees are not liable for any loss, damage or accidents that may occur on the auction premises. Bid Increments 1.00 up to 49.00 5.00 up to 95.00 10.00 up to 490.00 25.00 up to 1975.00 50.00 up to 4950.00 100.00 over 5,000.00
Online only auction held on site, machine shop equipment, tools and miscellaneous.

1
Hardinge Lathe Model DSM-59
Series G36 includes some tooling, must be diassembled

2
Warner & Swasey No. 4 Turret Lathe
M-1420, serial # 69229, includes some tooling, must be diassembled

3
Enco Drill Press
5/8" chuck, model 125-1170, serial# 15339, includes tool vise.

4

5
Jet Belt Drive Lathe
1340 PBD, stock number 321334, serial # K86-11-193, includes some tooling, must be disassembled

6
10" Industrial Bench Grinder
Model CBG10000L, 1750 RPM, single phase with stand

7

8
Warner & Swasey No. 3 Turret Lathe
M-1200, lot #399, serial # 1309769, with DRO, includes large lot of tooling, must be disassembled

9
Enco Lathe Type 110-2073
Includes some tooling.

10

11

12
DoAll Surface Grinder with Bench
With magnetic chuck, includes some tooling

13
K&F Drill Press
5 Speed, model # KF13, 5/8 chuck, 1/2 HP

14

15

16

17

18
Shelf Lot, 72 Bins of Assorted Hardware
Screws, washers, hardware, miscellaneous items, includes shelving.

19

20

21
Drawer Contents
2 drawers of shop parts and tooling

22
Drawer Contents
1 drawer of collets

23
Drawer Contents
1 drawer of chucks, electrical items and tools

24
Drawer Contents
1 drawer of cutting toos

25
Drawer Contents
2 drawers, electrical parts, tooling, grinding and drill bits.

26
Drawer Contents
2 drawers of drill bits, files and Allen wrenches

27
Drawer Contents
1 drawer, tooling, drill bits and cutting heads

28
Enco #30 Mill and Drilling Machine
model number 105-110, includes table and some tooling.

29
Warner & Swasey #2 Lathe
includes some tooling, m-1330, serial # 982431

30
Bridgeport Series 1 Milling Machine
with serve power feed, serial # j45678

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47
Lot 3 Chucks
6 1/2" 3 jaw, 8" 3 jaw and 8" 4 jaw

48

49
Lot of Misc. Assorted Hardware
nuts, bolts, includes part bins

50

51
Corner Shelf Lot of Hardware
screws, spindles and misc.

52

53

54

55

56

57

58

59

60

61

62
3 Tool Vises
Includes 2 angle vises, 1 tool vise

63

64

65

66

67

68

69

70

71

72

73

74

75

76
Lot Under Tool Bench, Front Room
Hoses, Tooling, Air Tank

77

78

79
Lot of Tools
Hand Tools, Come a Long, Vise

80

81

82

83
Large Double Cabinet Lot, Contents and Cabinets
Generators, grinding discs, various tools, incudes entire contents and cabinets. Cabinets are connected together and may need disassembled.

84
Front Room Corner Lot, Tooling & Cabinet
Includes some scrap metal, car stands and cabinet.

85

86

87

88

89

90

91