Chevrolet Dealership Liquidation #1
Listing ID#: 189931

Sale Location

Cordell, OK 73632
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday Aug 2
Bidding Ends: Monday Aug 20
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
United Country Heard Auction & Real Estate, LLC

Phone: 580-323-6120
Email: info@heardauction.com
Website: www.ucheardauction.com

EstateSale.com ID#: 9617
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction.
By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing.

Terms and Conditions:
1. GENERAL AUCTION INFORMATION
a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid.
b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included).
c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction.
d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received.
e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details.
f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs.

2. PURCHASES/FEES
a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed.
b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases.
c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing.
d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item.
e) Bidder agrees to pay for all items before removing any items from the auction site.

3. PAYMENT
a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases.
b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed.
c.) Buyers will be charged 9.5% tax on all items purchased.

4. ITEM DESCRIPTIONS
a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s).
b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin.
c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral.
d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly.
e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations.
f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s).

5. ONLINE AUCTIONS
a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion.
b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures.

6. LIABILITY
a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician.
b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased.
c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age.
d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items.

7. PARTIAL PAYMENT/ NON-PAYMENT
a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer.
b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s).
c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law.
d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice.
e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys.
f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction.
g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder.
h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession.

8. DISPUTES/ARBITRATION
a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid.
b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder.
c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer.
d) The decision of arbitration will be final and binding on all parties.

9. LEGAL ACTIONS
a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction
b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered.
c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction.
d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item.

10. SALES TAX
a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason.
b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes.
c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws.

11. GOVERNING LAW & JURY WAIVER
a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma.
b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma.
c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms.
d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party.

12. SEVERABILITY
Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.

Listing Information
Chevrolet Dealership Liquidation. This is the first of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 20th
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Monday, Aug 20th at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...


269
EN-46745
Wrist Pin Clip Replacer

270
EN-4699-10
CH-48482, J-45104, DT-49139, J-21370-10

272
J-46629-A
Installer, Axle Seal, & J-8092

273
EN-48108
GM Rear Main Seal Installer

274
EN-47909
Injector Bore Brush Kit

275
DT-47865
Housing Bearing Remover

276
BO-48206
Dispensing Gun, 2-Part Adhesive

277
EN-48051
Valve Spring Compressor & EN-48383 Camshaft Retaining Tool

278
DT-47857
Center Support Bearing Installer, DT 74866 Housing Bearing Installer, CH-47954-2, CH047954-3, J-33844, EN-49942

279
DT-47779
DT-47867, DT-47770, DT47779,

280
J-44375
Assembly Pallet

281
BO-47549
Seat Belt Retainer Bolt, & CH 51064 Feul Pressure Gauge Adapter, & BO 47666 Hydraulic Clip Installer

282
J-46091-10
Charge Air Cooler Tester Adapter & J-46091-5 Charge Air Cooler Test Adapter, J-46091 Inner coller tester

283
J-45999
Cup/Coin Holder Removal Tool

284
J-46091-15
Engine Pressure Test Adapter

286
EN-47518
Holder, Camshaft Sprocket

287
DT-47768
Turbine Shaft Seal Installer

288
J-45756
DT-47791-A, J-46405, DT-47715, DT-47521, J-49154

289
CH-48600
P/S Analyzer Adapters

290
DT-47732
Axle Boot Swage Clamp

291
DT-47782
Housing Snap Ring installer

292
DT-47761
2 - 6 Clutch spring compressor

293
BO-47869
Lock Cylinder Staking tool

294
EN-47971
Oil pressure gauge pre-luber adapter

295
GE-47829
Slide hammer extension

296
EL-47749
Coax antenna test adapters

297
GE-47742
A/C switch test adapter

300
J-21362
Clutch Inner Seal Protector

301
J-21363
Clutch Inner Seal Protector

302
J-21426
EXT Housing oild seal installer

303
J-21370-A
Band Apply Pin Gauge

304
J-21474-18
control arm bushing nut tool

305
J-21474-19
Puller Bolt/Thrust Bearing

306
J-21777-1
Body & Pin Assembly

307
J-21777-29
Pinion Setting Gauge Plate

308
J-21777-36
Gauge Plate

309
J-21777-45
Side bearing disc

310
J-21777-85
Gauge Plate

311
J-21777-86
Gauge Disc

312
J-21854-A
Pivot Pin Remover

313
J-21867-6
Oil Pressure gauge adapter

314
J-21867-850
Oil Pressure adapter

315
J-21867-65
Oil pressure gauge adapter

316
J-21867-16
Loma oil pressure gauge adapter

317
J-21867-50
Transmission pressure gauge adapter

318
J-22144
Suction tube installer

319
J-22610
Plier, Clamp Remover/Installer

320
J-22888-D
Side bearing remover set

321
J-23028-15
Coil spring R/I adapter

322
J-23129
CONV housing seal remover

323
J-23444-A
Extreme pressure lubricant

324
J-23597-1
Body & plunger assembly

325
J-23656-SIR
Column Lock plate compressor

326
J-24086-920A
Piston pin fork insert

327
J-24086-310
Piston pin R/I adapter

328
J-23656-D
Steering Column Lock Plate Compressor Tool

329
J-23653-91A
Cancel Cam plate compressor

330
J-21867
pressure gauge

331
J-24086-900A
Piston Pin Remover Installer Adapter tool

332
J-25234
installer, bearing

333
J-24773-A
End play check fixture

334
J-24426
Outer Wheel Bearing Cup Installer Gmt800 3500 Series

335
J-24086-920A
Piston fork insert

336
J-42640
Steering column anti rot pin

337
J-26508
Rear Transmission Seal Installer

338
J-26999-20
Compression gauge adapter

340
J-25695-10
Oil Pressure Gauge Adapter

341
J-26958-10A
Load tool mounting adapter & J-26958-11A output shaft load tool adapter

342
J-28467-20
engine support fisture adapter set

343
J-28467-400
engine support fixture bracket

344
J-28467-200A
engine support system

345
J-28467-50
engine support hook & J-44586

346
J-29829-1A
seal protector

347
J-28721-902
Wheel Bearing Nut Wrench 6-Point

348
J-29803-A
ISO flaring tool kit

349
J-29714-A
servo cover depressor

350
J-29658-500
fuel pressure gauge

351
J-33381-A
final drive remover & installer

352
J-29882
overrun clutch inner seal protector

353
J-29883
Forward Clutch inner seal protector

354
J-33008
axle shaft remover

355
J-33025-97
a/c puller leg adapter

356
J-33037
intermediate band apply pin gauge

357
J-33386-A
input shaft end play gauge

358
J-34013-88A
strut compressor adapter

359
J-33386-1A
input shaftend play gauge pin

360
J-33984-A
Radiator test adapter

361
J-34013-900
strut alignment rod

362
J-34013-970
strut compressor adapter set

363
J-34013-197
strut alignment rod

364
J-34095
shaft loading tool adapter

365
J-34741-2
Seal Pusher Assembly

366
J-34686
Rear main oil seal installer

367
J-34730-230
Poppet Valve Test Device

368
J-347141-A
input shaft seal installer

369
J-35354-A
Front Cover seal installer

370
J-35468
front cover seal installer

371
J-35566
boot clamp pliers

372
J-35589-3
master cylinder bleeder adapter

373
J-35616-20F
wire fused jumper kit

374
J-35616-710
test probe update kit

375
J-34013-197
strut compressor alignment rod

376
J-35639-90
Pass Adapter harness

377
J-35628-210
pass key tester adapter set

378
J-35731
fuel tank sending unit wrench

379
J-35667-9
cylinder leakdown test adapter

380
J-35944-A
Transmission Cooler Flusher

381
J-36615-A
side bearing adjusting nut wrench

382
J-35999
spring scale

383
J-36018
belt tension gauge

384
J-36169-HD
heavy duty fused jumper wire

385
J-36202-A
torsion bar unloader

386
J-36221
hydraulic clutch line separator

387
J-36418-1B
seal protector

388
J-36547
input shaft seal installer

389
J-36649
adaptor-surge tank cap

390
J-35800-A
cleaner,fuel injection

391
J-37287
fuel line shut off adapters

392
J-36652-98
drive axle swage tool

393
J-36792
rear crankshaft oil seal installer

394
J-36995-A
balance shaft bearing installer

395
J-36996
balance shaft installer

396
J-37027-1A
IAC tester


398
J-37105-C
front hub service set

399
J-37361
clutch piston seal protector

400
J-37362
clutch piston seal protector

401
J-37789-A
oil pump assembly R & I

402
J-37808-55
SRS load tool adapter set

403
J-377979
J-37979-A

404
J-38118
rear wheel toe adjust tool

405
DT-47624
long cooler line removal tool

406
J-38125-760
terminal kit

407
J-38125-SIR/SRS
Terminal repair kit supplement

408
J-38358-A
clutch assy final drive R & I

409
J-38385
output shaft load tool adapter

410
J-36541-A
steering wheel puller legs

411
J-38678-A
2nd clutch piston seal installer

412
J-38715-50
SIR load tool adapter

413
EL-38715-140
SIR load tool adapter

414
EL-38715-145
SIR load tool adapter

415
EL-38715-160
SIR load tool adapter

416
J-38720
steering wheel puller

417
J-38733-A
direct clutch assembly R & I

418
J-38735
support seal prot/inst/sizer

419
J-38736
seal installer/sizer/pusher

420
J-38739
oil pump assembly remover

421
J-38758
parasitic draw test switch

422
J-38826
SIR deployment harness

423
J-388256-45
SIR deployment harness

424
J-38864
door module coild spring tool

425
J-39054-450
fuel injector test adapter

426
J-39195
end play checking tool

427
J-39348
fuel tank sending unit wrench

428
J-39440
extension housing seal installer

429
J-39579
camshaft gear holder

430
J-39439
replacer, shift rail bushing

431
J-39511
remover, bearing

432
J-39700-650
breakout box adapter

432
J-39700-650
breakout box adapter

433
J-39700-15
anti lock brake/traction control system adapter cable

433
J-39700-15
anti lock brake/traction control system adapter cable

434
J-39937
timing cover seal installer

434
J-39937
timing cover seal installer

435
J-39441
installer

435
J-39441
installer

436
J-39775
jumper harness

436
J-39775
jumper harness

437
J-35798
pressure bleeder adapter

437
J-35798
pressure bleeder adapter

438
J-41088
balance shaft holding plate

438
J-41088
balance shaft holding plate

439
J-41094
extension housing seal installer

439
J-41094
extension housing seal installer

439
J-41172
pinion seal installer

440
J-41230
holding fixture

441
J-41231
seal installer

441
J-41231
seal installer

442
J-41234
seal installer set

442
J-41234
seal installer set

443
J-41235
retainer installer

443
J-41235
retainer installer

444
J-41239-A
cooler pipe seal installer

444
J-41239-A
cooler pipe seal installer

445
J-41336
radiator pressure test adapter

445
J-41336
radiator pressure test adapter

446
J-41340-A
lock cylinder holding fixture

446
J-41340-A
lock cylinder holding fixture

447
J-41348
bearing cap remover

447
J-41348
bearing cap remover

448
J-41349
rear housing aligner

448
J-41349
rear housing aligner

449
J-41352
modular column holding fixture

450
J-41352-97
column holding fixtture

451
J-41364-A
NSBU alignment tool

451
J-41364-A
NSBU alignment tool

452
J-41371
reluctor gear puller

452
J-41371
reluctor gear puller

453
J-41396
park lock cable pliers

453
J-41396
park lock cable pliers

454
J-41398
C.V. joint puller

454
J-41398
C.V. joint puller

455
EN-46999
D.O.D. tester

455
EN-46999
D.O.D. tester

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

457
J-41427
engine lift backet

457
J-41427
engine lift backet

458
J-41450-B
CS generator tester

458
J-41450-B
CS generator tester

459
J-41479-2A
seal installer pilot

460
J-41507
connecting rod assembly guide

461
J-41510
converter housing torx bit

461
J-41510
converter housing torx bit

462
J-41512
valve seal installer

462
J-41512
valve seal installer

463
J-38125-750
terminal repair kit

463
J-38125-750
terminal repair kit

466
J-21474
control arm bushing set

466
J-21474
control arm bushing set

467
J-41663
NVG assembly pallet

467
J-41663
NVG assembly pallet

468
J-41545
Park Neutral position switch

468
J-41545
Park Neutral position switch

469
J-41546
coolant pump gear installer

469
J-41546
coolant pump gear installer

470
J-41552
compressor pulley puller

470
J-41552
compressor pulley puller

471
J-41558-10UPD
gear remover adapter bolts

472
J-41618
brake bleeder adapter set

473
J-41623-B
cooler line disc

474
J-41676
FRT output shaft bearing inst adpt

475
J-41677
FRT output shaft bearing rem adpt

476
J-41678
front input bearing remover

477
J-41679
front input bearing installer

478
J-41681
clutch spring compressor

479
J-41688
centering sphere installer

480
J-41760
low tire sensor programing tool

481
J-41778
pump bushing service kit

482
J-41790-A
compressor holding fixture

483
J-41798
engine lift backets

484
J-41819
input shaft seal installer

485
J-41990
fuel displacement gage

486
J-41991
driveshaft bearing R & I

487
J-42214-A
Headrest removal tool

488
J-41992
2nd clutch piston installer

489
J-41998-B
Harmonic balancer installer

490
J-42037
valve spring comp. adapter

491
J-42038
camshaft holders

492
J-42039
valve spring compressor

493
J-42041
front cover/balancer installer

494
J-42042
camshaft timing holder

495
J-42055
trans jack adapter

496
J-42067
rear main seal installer

497
J-42073
valve stem seal installer

498
J-42109
valve stem seal installer

499
J-42113
shorting bar lifitng tool

500
J-42119
spindale nut wrench set

501
J-421020
steering wheel puller legs

502
J-42188-B
ball joint separator

503
J-42136
A/C shaft seal remover

504
J-42137
cam orientation plate adapter

505
J-42211
axel bearing installer

506
J-42213
side bearing adjuster wrench

507
J-42236-A
date bus diagnostic tool

508
J-42385-2022
timesert drill bushing

509
J-42372
Headrest removal tool

510
J-42393
torsion bar unloader

511
J-42401
radiator pressure adapter

512
J-42402
connector back bolt remover

513
J-42450-A
hub resurfacing kit

514
J-42467
power steering pulley remover

515
J-42468
front strut mount nut wrench

516
J-42478
engine support adapters

517
J-42506
sliding door handle remover

518
J-42562
axle remover wedge

519
J-42578
steering wheel puller legs

520
J-47275
harness, 4th Gen TCM breakout

521
J-42598
vehicle data recorder

522
J-44755
assembly holding fixture

523
DT-47785
oil fill adapter

524
GE-47716-20
adapter cooling system

525
GE-50389
quicdk connect assebly adapter

526
DT-47791
installer, converter seal

527
BO-48370
lock cylinder cap installer

528
Chev 5S-BLS
bin label service strip

529
Common-BLS
bin label service strip

530
CH-48027-9
adapter, oil pressure test

531
EL-48028
XM radio test antenna

532
CH-48051
parking brake actuator

533
CH-48894
pliers, drive axle clamp

533
CH-48894
pliers, drive axle clamp

534
DT-48285
vavle body torx plus socket

534
DT-48285
vavle body torx plus socket

535
EN-48565
EGR test harness

535
EN-48565
EGR test harness

536
CH-48650
P/S analyzer adapters

536
CH-48650
P/S analyzer adapters

537
EN-48694
compression gauge adapter

537
EN-48694
compression gauge adapter

538
EN-48749
retainer, timing chain

538
EN-48749
retainer, timing chain

539
EN-48896
alignment gauge, fuel pump installation

539
EN-48896
alignment gauge, fuel pump installation

540
EN-48953
cam phaser retainer

540
EN-48953
cam phaser retainer

541
EN-48974
adapters, EGR cooler test

542
EN-48974-20
EGR cooler test adapter set

543
EN-49102
remover, main bearing cap

543
EN-49102
remover, main bearing cap

544
DT-49101
installer, manual shaft seal

544
DT-49101
installer, manual shaft seal

545
DT-47790
installer, axle seal

545
DT-47790
installer, axle seal

545
EL-49903
test tool

545
EL-49903
test tool

546
BO-49753
fixture, lock cylinder retaining

546
BO-49753
fixture, lock cylinder retaining

547
KM-422
Camshaft seal installer

547
KM-422
Camshaft seal installer

548
KM-635
crank rear oil seal installer

548
KM-635
crank rear oil seal installer

549
KM-460-b
axle shaft remover

549
KM-460-b
axle shaft remover

550
KM-507-C
ball joint remover pontiac G3

551
KM-508-A
lower control arm bushing replacer for GM

552
KM-158
front lower control arm bushing remover installer set

552
KM-158
front lower control arm bushing remover installer set

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

554
KM-653-A
adapter valve spring compressor

554
KM-653-A
adapter valve spring compressor

555
EN-50721
installer, stretchy belt

555
EN-50721
installer, stretchy belt

556
KM-108
remover/installer

556
KM-108
remover/installer

557
EN-48932
compressor, belt tensioner

557
EN-48932
compressor, belt tensioner

558
EN-49982
retainer, timing chain

558
EN-49982
retainer, timing chain

559
EN-49010
holder, flywheel

559
EN-49010
holder, flywheel

560
EL-49257
harness, inflator diagnostic

561
DT-47811-A
lift plate, transaxle

564
KM-6009
replacer, ignition coil

564
KM-6009
replacer, ignition coil

565
KM-6333
rod, timing belt tensioner retaining

565
KM-6333
rod, timing belt tensioner retaining

566
KM-6340
lock, camshaft gear

566
KM-6340
lock, camshaft gear

567
KM-6351
installer, crankshaft front seal

567
KM-6351
installer, crankshaft front seal

568
KM-6625
lock, flywheel

568
KM-6625
lock, flywheel

569
KM-6628-A
lock, comshaft

569
KM-6628-A
lock, comshaft

570
EN-48853
aligner, front cover

570
EN-48853
aligner, front cover

571
CH-47950
hydro-boost checking tool

571
CH-47950
hydro-boost checking tool

572
EN-49247
fuel rail clip installer

573
EN-49245
injector seals inst/sizer

574
EL-48571-A
HV battery pin out box & EL-48571-30, adapter, HV pinout box

575
EN-49774
injector remover

576
CH-49736
quick connect 3/16' release

577
EN-49761
valve stem seal installer

578
DT-49861
installer, pump seal

579
EN-49977
fixation sensor discs

580
KM-952
guide, crankshaft TDC position

581
KM-953-A
guide, crankshaft TDC position

582
Dt-49291
clutch passage plug kit

583
J-43649
valve spring compressor Dp19

584
J-8062-5
valve spring comp adapter

585
EN-50717-10
valve spring compressor adapters

586
CH-49824
separator, steering linkage

587
CH-50636
socket, axle hub bearing nut

588
EL-50334-11EN-50334-50
kit, infotainment adapter

589
EN-46091-15A
adapter, diesel engine pressure test

590
J-44853
rear clutch pack seal/pinion seal installer flush adapter

591
KM-6263-27
clutch pilot

592
DT-49743
adapter, low clutch spring compressor

593
J-6125-B
slide hammer ser with adapters

594
EN-47988
serpentine belt tension unloader

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Apr 20 - Apr 30
Clinton, OK


Apr 30
Butler, OK



Sponsored Links

Chevrolet Dealership Liquidation #1

United Country Heard Auction & Real Estate, LLC

United Country Heard Auction & Real Estate, LLC


Contact:
Phone: 580-323-6120
Sale Location
1707 N Glenn English Road
Cordell, OK 73632
Sale Dates and Times
Sale Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction. By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing. Terms and Conditions: 1. GENERAL AUCTION INFORMATION a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid. b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included). c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction. d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received. e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details. f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs. 2. PURCHASES/FEES a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases. c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing. d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. e) Bidder agrees to pay for all items before removing any items from the auction site. 3. PAYMENT a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases. b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. c.) Buyers will be charged 9.5% tax on all items purchased. 4. ITEM DESCRIPTIONS a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s). b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin. c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral. d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly. e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations. f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s). 5. ONLINE AUCTIONS a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion. b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures. 6. LIABILITY a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician. b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased. c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age. d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items. 7. PARTIAL PAYMENT/ NON-PAYMENT a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer. b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s). c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law. d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice. e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys. f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction. g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder. h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession. 8. DISPUTES/ARBITRATION a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid. b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder. c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer. d) The decision of arbitration will be final and binding on all parties. 9. LEGAL ACTIONS a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered. c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction. d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item. 10. SALES TAX a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason. b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes. c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws. 11. GOVERNING LAW & JURY WAIVER a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma. b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma. c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms. d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party. 12. SEVERABILITY Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.
Listing Details
Chevrolet Dealership Liquidation. This is the first of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 20th
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Monday, Aug 20th at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...


269
EN-46745
Wrist Pin Clip Replacer

270
EN-4699-10
CH-48482, J-45104, DT-49139, J-21370-10

272
J-46629-A
Installer, Axle Seal, & J-8092

273
EN-48108
GM Rear Main Seal Installer

274
EN-47909
Injector Bore Brush Kit

275
DT-47865
Housing Bearing Remover

276
BO-48206
Dispensing Gun, 2-Part Adhesive

277
EN-48051
Valve Spring Compressor & EN-48383 Camshaft Retaining Tool

278
DT-47857
Center Support Bearing Installer, DT 74866 Housing Bearing Installer, CH-47954-2, CH047954-3, J-33844, EN-49942

279
DT-47779
DT-47867, DT-47770, DT47779,

280
J-44375
Assembly Pallet

281
BO-47549
Seat Belt Retainer Bolt, & CH 51064 Feul Pressure Gauge Adapter, & BO 47666 Hydraulic Clip Installer

282
J-46091-10
Charge Air Cooler Tester Adapter & J-46091-5 Charge Air Cooler Test Adapter, J-46091 Inner coller tester

283
J-45999
Cup/Coin Holder Removal Tool

284
J-46091-15
Engine Pressure Test Adapter

286
EN-47518
Holder, Camshaft Sprocket

287
DT-47768
Turbine Shaft Seal Installer

288
J-45756
DT-47791-A, J-46405, DT-47715, DT-47521, J-49154

289
CH-48600
P/S Analyzer Adapters

290
DT-47732
Axle Boot Swage Clamp

291
DT-47782
Housing Snap Ring installer

292
DT-47761
2 - 6 Clutch spring compressor

293
BO-47869
Lock Cylinder Staking tool

294
EN-47971
Oil pressure gauge pre-luber adapter

295
GE-47829
Slide hammer extension

296
EL-47749
Coax antenna test adapters

297
GE-47742
A/C switch test adapter

300
J-21362
Clutch Inner Seal Protector

301
J-21363
Clutch Inner Seal Protector

302
J-21426
EXT Housing oild seal installer

303
J-21370-A
Band Apply Pin Gauge

304
J-21474-18
control arm bushing nut tool

305
J-21474-19
Puller Bolt/Thrust Bearing

306
J-21777-1
Body & Pin Assembly

307
J-21777-29
Pinion Setting Gauge Plate

308
J-21777-36
Gauge Plate

309
J-21777-45
Side bearing disc

310
J-21777-85
Gauge Plate

311
J-21777-86
Gauge Disc

312
J-21854-A
Pivot Pin Remover

313
J-21867-6
Oil Pressure gauge adapter

314
J-21867-850
Oil Pressure adapter

315
J-21867-65
Oil pressure gauge adapter

316
J-21867-16
Loma oil pressure gauge adapter

317
J-21867-50
Transmission pressure gauge adapter

318
J-22144
Suction tube installer

319
J-22610
Plier, Clamp Remover/Installer

320
J-22888-D
Side bearing remover set

321
J-23028-15
Coil spring R/I adapter

322
J-23129
CONV housing seal remover

323
J-23444-A
Extreme pressure lubricant

324
J-23597-1
Body & plunger assembly

325
J-23656-SIR
Column Lock plate compressor

326
J-24086-920A
Piston pin fork insert

327
J-24086-310
Piston pin R/I adapter

328
J-23656-D
Steering Column Lock Plate Compressor Tool

329
J-23653-91A
Cancel Cam plate compressor

330
J-21867
pressure gauge

331
J-24086-900A
Piston Pin Remover Installer Adapter tool

332
J-25234
installer, bearing

333
J-24773-A
End play check fixture

334
J-24426
Outer Wheel Bearing Cup Installer Gmt800 3500 Series

335
J-24086-920A
Piston fork insert

336
J-42640
Steering column anti rot pin

337
J-26508
Rear Transmission Seal Installer

338
J-26999-20
Compression gauge adapter

340
J-25695-10
Oil Pressure Gauge Adapter

341
J-26958-10A
Load tool mounting adapter & J-26958-11A output shaft load tool adapter

342
J-28467-20
engine support fisture adapter set

343
J-28467-400
engine support fixture bracket

344
J-28467-200A
engine support system

345
J-28467-50
engine support hook & J-44586

346
J-29829-1A
seal protector

347
J-28721-902
Wheel Bearing Nut Wrench 6-Point

348
J-29803-A
ISO flaring tool kit

349
J-29714-A
servo cover depressor

350
J-29658-500
fuel pressure gauge

351
J-33381-A
final drive remover & installer

352
J-29882
overrun clutch inner seal protector

353
J-29883
Forward Clutch inner seal protector

354
J-33008
axle shaft remover

355
J-33025-97
a/c puller leg adapter

356
J-33037
intermediate band apply pin gauge

357
J-33386-A
input shaft end play gauge

358
J-34013-88A
strut compressor adapter

359
J-33386-1A
input shaftend play gauge pin

360
J-33984-A
Radiator test adapter

361
J-34013-900
strut alignment rod

362
J-34013-970
strut compressor adapter set

363
J-34013-197
strut alignment rod

364
J-34095
shaft loading tool adapter

365
J-34741-2
Seal Pusher Assembly

366
J-34686
Rear main oil seal installer

367
J-34730-230
Poppet Valve Test Device

368
J-347141-A
input shaft seal installer

369
J-35354-A
Front Cover seal installer

370
J-35468
front cover seal installer

371
J-35566
boot clamp pliers

372
J-35589-3
master cylinder bleeder adapter

373
J-35616-20F
wire fused jumper kit

374
J-35616-710
test probe update kit

375
J-34013-197
strut compressor alignment rod

376
J-35639-90
Pass Adapter harness

377
J-35628-210
pass key tester adapter set

378
J-35731
fuel tank sending unit wrench

379
J-35667-9
cylinder leakdown test adapter

380
J-35944-A
Transmission Cooler Flusher

381
J-36615-A
side bearing adjusting nut wrench

382
J-35999
spring scale

383
J-36018
belt tension gauge

384
J-36169-HD
heavy duty fused jumper wire

385
J-36202-A
torsion bar unloader

386
J-36221
hydraulic clutch line separator

387
J-36418-1B
seal protector

388
J-36547
input shaft seal installer

389
J-36649
adaptor-surge tank cap

390
J-35800-A
cleaner,fuel injection

391
J-37287
fuel line shut off adapters

392
J-36652-98
drive axle swage tool

393
J-36792
rear crankshaft oil seal installer

394
J-36995-A
balance shaft bearing installer

395
J-36996
balance shaft installer

396
J-37027-1A
IAC tester


398
J-37105-C
front hub service set

399
J-37361
clutch piston seal protector

400
J-37362
clutch piston seal protector

401
J-37789-A
oil pump assembly R & I

402
J-37808-55
SRS load tool adapter set

403
J-377979
J-37979-A

404
J-38118
rear wheel toe adjust tool

405
DT-47624
long cooler line removal tool

406
J-38125-760
terminal kit

407
J-38125-SIR/SRS
Terminal repair kit supplement

408
J-38358-A
clutch assy final drive R & I

409
J-38385
output shaft load tool adapter

410
J-36541-A
steering wheel puller legs

411
J-38678-A
2nd clutch piston seal installer

412
J-38715-50
SIR load tool adapter

413
EL-38715-140
SIR load tool adapter

414
EL-38715-145
SIR load tool adapter

415
EL-38715-160
SIR load tool adapter

416
J-38720
steering wheel puller

417
J-38733-A
direct clutch assembly R & I

418
J-38735
support seal prot/inst/sizer

419
J-38736
seal installer/sizer/pusher

420
J-38739
oil pump assembly remover

421
J-38758
parasitic draw test switch

422
J-38826
SIR deployment harness

423
J-388256-45
SIR deployment harness

424
J-38864
door module coild spring tool

425
J-39054-450
fuel injector test adapter

426
J-39195
end play checking tool

427
J-39348
fuel tank sending unit wrench

428
J-39440
extension housing seal installer

429
J-39579
camshaft gear holder

430
J-39439
replacer, shift rail bushing

431
J-39511
remover, bearing

432
J-39700-650
breakout box adapter

432
J-39700-650
breakout box adapter

433
J-39700-15
anti lock brake/traction control system adapter cable

433
J-39700-15
anti lock brake/traction control system adapter cable

434
J-39937
timing cover seal installer

434
J-39937
timing cover seal installer

435
J-39441
installer

435
J-39441
installer

436
J-39775
jumper harness

436
J-39775
jumper harness

437
J-35798
pressure bleeder adapter

437
J-35798
pressure bleeder adapter

438
J-41088
balance shaft holding plate

438
J-41088
balance shaft holding plate

439
J-41094
extension housing seal installer

439
J-41094
extension housing seal installer

439
J-41172
pinion seal installer

440
J-41230
holding fixture

441
J-41231
seal installer

441
J-41231
seal installer

442
J-41234
seal installer set

442
J-41234
seal installer set

443
J-41235
retainer installer

443
J-41235
retainer installer

444
J-41239-A
cooler pipe seal installer

444
J-41239-A
cooler pipe seal installer

445
J-41336
radiator pressure test adapter

445
J-41336
radiator pressure test adapter

446
J-41340-A
lock cylinder holding fixture

446
J-41340-A
lock cylinder holding fixture

447
J-41348
bearing cap remover

447
J-41348
bearing cap remover

448
J-41349
rear housing aligner

448
J-41349
rear housing aligner

449
J-41352
modular column holding fixture

450
J-41352-97
column holding fixtture

451
J-41364-A
NSBU alignment tool

451
J-41364-A
NSBU alignment tool

452
J-41371
reluctor gear puller

452
J-41371
reluctor gear puller

453
J-41396
park lock cable pliers

453
J-41396
park lock cable pliers

454
J-41398
C.V. joint puller

454
J-41398
C.V. joint puller

455
EN-46999
D.O.D. tester

455
EN-46999
D.O.D. tester

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

457
J-41427
engine lift backet

457
J-41427
engine lift backet

458
J-41450-B
CS generator tester

458
J-41450-B
CS generator tester

459
J-41479-2A
seal installer pilot

460
J-41507
connecting rod assembly guide

461
J-41510
converter housing torx bit

461
J-41510
converter housing torx bit

462
J-41512
valve seal installer

462
J-41512
valve seal installer

463
J-38125-750
terminal repair kit

463
J-38125-750
terminal repair kit

466
J-21474
control arm bushing set

466
J-21474
control arm bushing set

467
J-41663
NVG assembly pallet

467
J-41663
NVG assembly pallet

468
J-41545
Park Neutral position switch

468
J-41545
Park Neutral position switch

469
J-41546
coolant pump gear installer

469
J-41546
coolant pump gear installer

470
J-41552
compressor pulley puller

470
J-41552
compressor pulley puller

471
J-41558-10UPD
gear remover adapter bolts

472
J-41618
brake bleeder adapter set

473
J-41623-B
cooler line disc

474
J-41676
FRT output shaft bearing inst adpt

475
J-41677
FRT output shaft bearing rem adpt

476
J-41678
front input bearing remover

477
J-41679
front input bearing installer

478
J-41681
clutch spring compressor

479
J-41688
centering sphere installer

480
J-41760
low tire sensor programing tool

481
J-41778
pump bushing service kit

482
J-41790-A
compressor holding fixture

483
J-41798
engine lift backets

484
J-41819
input shaft seal installer

485
J-41990
fuel displacement gage

486
J-41991
driveshaft bearing R & I

487
J-42214-A
Headrest removal tool

488
J-41992
2nd clutch piston installer

489
J-41998-B
Harmonic balancer installer

490
J-42037
valve spring comp. adapter

491
J-42038
camshaft holders

492
J-42039
valve spring compressor

493
J-42041
front cover/balancer installer

494
J-42042
camshaft timing holder

495
J-42055
trans jack adapter

496
J-42067
rear main seal installer

497
J-42073
valve stem seal installer

498
J-42109
valve stem seal installer

499
J-42113
shorting bar lifitng tool

500
J-42119
spindale nut wrench set

501
J-421020
steering wheel puller legs

502
J-42188-B
ball joint separator

503
J-42136
A/C shaft seal remover

504
J-42137
cam orientation plate adapter

505
J-42211
axel bearing installer

506
J-42213
side bearing adjuster wrench

507
J-42236-A
date bus diagnostic tool

508
J-42385-2022
timesert drill bushing

509
J-42372
Headrest removal tool

510
J-42393
torsion bar unloader

511
J-42401
radiator pressure adapter

512
J-42402
connector back bolt remover

513
J-42450-A
hub resurfacing kit

514
J-42467
power steering pulley remover

515
J-42468
front strut mount nut wrench

516
J-42478
engine support adapters

517
J-42506
sliding door handle remover

518
J-42562
axle remover wedge

519
J-42578
steering wheel puller legs

520
J-47275
harness, 4th Gen TCM breakout

521
J-42598
vehicle data recorder

522
J-44755
assembly holding fixture

523
DT-47785
oil fill adapter

524
GE-47716-20
adapter cooling system

525
GE-50389
quicdk connect assebly adapter

526
DT-47791
installer, converter seal

527
BO-48370
lock cylinder cap installer

528
Chev 5S-BLS
bin label service strip

529
Common-BLS
bin label service strip

530
CH-48027-9
adapter, oil pressure test

531
EL-48028
XM radio test antenna

532
CH-48051
parking brake actuator

533
CH-48894
pliers, drive axle clamp

533
CH-48894
pliers, drive axle clamp

534
DT-48285
vavle body torx plus socket

534
DT-48285
vavle body torx plus socket

535
EN-48565
EGR test harness

535
EN-48565
EGR test harness

536
CH-48650
P/S analyzer adapters

536
CH-48650
P/S analyzer adapters

537
EN-48694
compression gauge adapter

537
EN-48694
compression gauge adapter

538
EN-48749
retainer, timing chain

538
EN-48749
retainer, timing chain

539
EN-48896
alignment gauge, fuel pump installation

539
EN-48896
alignment gauge, fuel pump installation

540
EN-48953
cam phaser retainer

540
EN-48953
cam phaser retainer

541
EN-48974
adapters, EGR cooler test

542
EN-48974-20
EGR cooler test adapter set

543
EN-49102
remover, main bearing cap

543
EN-49102
remover, main bearing cap

544
DT-49101
installer, manual shaft seal

544
DT-49101
installer, manual shaft seal

545
DT-47790
installer, axle seal

545
DT-47790
installer, axle seal

545
EL-49903
test tool

545
EL-49903
test tool

546
BO-49753
fixture, lock cylinder retaining

546
BO-49753
fixture, lock cylinder retaining

547
KM-422
Camshaft seal installer

547
KM-422
Camshaft seal installer

548
KM-635
crank rear oil seal installer

548
KM-635
crank rear oil seal installer

549
KM-460-b
axle shaft remover

549
KM-460-b
axle shaft remover

550
KM-507-C
ball joint remover pontiac G3

551
KM-508-A
lower control arm bushing replacer for GM

552
KM-158
front lower control arm bushing remover installer set

552
KM-158
front lower control arm bushing remover installer set

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

554
KM-653-A
adapter valve spring compressor

554
KM-653-A
adapter valve spring compressor

555
EN-50721
installer, stretchy belt

555
EN-50721
installer, stretchy belt

556
KM-108
remover/installer

556
KM-108
remover/installer

557
EN-48932
compressor, belt tensioner

557
EN-48932
compressor, belt tensioner

558
EN-49982
retainer, timing chain

558
EN-49982
retainer, timing chain

559
EN-49010
holder, flywheel

559
EN-49010
holder, flywheel

560
EL-49257
harness, inflator diagnostic

561
DT-47811-A
lift plate, transaxle

564
KM-6009
replacer, ignition coil

564
KM-6009
replacer, ignition coil

565
KM-6333
rod, timing belt tensioner retaining

565
KM-6333
rod, timing belt tensioner retaining

566
KM-6340
lock, camshaft gear

566
KM-6340
lock, camshaft gear

567
KM-6351
installer, crankshaft front seal

567
KM-6351
installer, crankshaft front seal

568
KM-6625
lock, flywheel

568
KM-6625
lock, flywheel

569
KM-6628-A
lock, comshaft

569
KM-6628-A
lock, comshaft

570
EN-48853
aligner, front cover

570
EN-48853
aligner, front cover

571
CH-47950
hydro-boost checking tool

571
CH-47950
hydro-boost checking tool

572
EN-49247
fuel rail clip installer

573
EN-49245
injector seals inst/sizer

574
EL-48571-A
HV battery pin out box & EL-48571-30, adapter, HV pinout box

575
EN-49774
injector remover

576
CH-49736
quick connect 3/16' release

577
EN-49761
valve stem seal installer

578
DT-49861
installer, pump seal

579
EN-49977
fixation sensor discs

580
KM-952
guide, crankshaft TDC position

581
KM-953-A
guide, crankshaft TDC position

582
Dt-49291
clutch passage plug kit

583
J-43649
valve spring compressor Dp19

584
J-8062-5
valve spring comp adapter

585
EN-50717-10
valve spring compressor adapters

586
CH-49824
separator, steering linkage

587
CH-50636
socket, axle hub bearing nut

588
EL-50334-11EN-50334-50
kit, infotainment adapter

589
EN-46091-15A
adapter, diesel engine pressure test

590
J-44853
rear clutch pack seal/pinion seal installer flush adapter

591
KM-6263-27
clutch pilot

592
DT-49743
adapter, low clutch spring compressor

593
J-6125-B
slide hammer ser with adapters

594
EN-47988
serpentine belt tension unloader

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Chevrolet Dealership Liquidation #1
 Online Only Auction
Sale Date(s)
Bidding Starts: Thursday Aug 2
Bidding Ends: Monday Aug 20
Sale Location

Cordell, OK 73632
Company
Listing Terms and Conditions
The following terms and conditions apply to all auctions conducted by United Country Heard Auction and Real Estate, it's employees, agents, and assigns (Auctioneer), and any participants, their employees, agents, and assigns (Bidder), in said auctions, unless otherwise stipulated by the Auctioneer within any additional terms and conditions specifically expressed in regard to any single auction. By registering for, and participating in, this auction, Bidder acknowledges these terms and conditions and consents to abide by them, as well as any other/additional terms and conditions expressed specifically elsewhere within any auction listing. Terms and Conditions: 1. GENERAL AUCTION INFORMATION a) ALL ITEMS on the auction sell subject to the Auction Co.'s acceptance or rejection of the high bid. b) All items sold at auction conducted by Auctioneer are sold strictly on an "as-is-where-is" basis (shipping, packing, and/or loading are not included). c) Auctioneer and/or its consignor(s) reserve the right to add, delete, or alter any auction item prior to the opening of the auction. d) Neither the Auctioneer, nor its consignor(s), will recognize, or be held liable for, any claims for theft, damage, or loss once an item has been awarded and Bidder payment has been received. e) Auctioneer DOES NOT SHIP ALL items. Bidder is responsible for any/all shipping costs assessed by the auctioneer, when available. All non-shipped items must be picked up from auction site by Bidder, or authorized Bidder representative, at designated date and time. See Auction info for specific auction details. f) Items not picked up by Bidder, or authorized Bidder representative, within stipulated time frame, regardless of payment, will be subject to a storage rate of ($10) per item, per day, and may be re-sold, at Auctioneer's sole discretion, to pay for storage costs. 2. PURCHASES/FEES a) All sales are final and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. b) A thirteen percent (13%) Buyers Premium will be applied to ALL purchases. c) ALL internet/online purchases may be subject to a per-item internet/handling fee. The auctioneer will list this fee, when applicable, in the shipping/pickup information section of the auction listing. d) All funds are to be paid in USD. Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. e) Bidder agrees to pay for all items before removing any items from the auction site. 3. PAYMENT a.) All purchases must be paid in full by end of auction. Acceptable method of payment is by credit card. All funds will be paid in USD. (13%) Buyer's Premium will be applied to ALL purchases. b.) Bidder is responsible for and agrees to pay, all duties, custom, taxes, and any other fees associated with the purchase of any item. All sales are final, and no sale shall be invalidated. There are no returns or refunds, and credit payments cannot be reversed. c.) Buyers will be charged 9.5% tax on all items purchased. 4. ITEM DESCRIPTIONS a) Neither the Auctioneer nor its consignor(s), make any guarantees, warranties or representations, expressed or implied, with respect to the property being sold, except as to the warranty of title. All implied warranties of merchantability, and/or fitness for purpose, are specifically disclaimed by the Auctioneer and its consignor(s). b) Specifically, neither the Auctioneer, nor its consignors, makes any representation or warranty of any kind, expressed or implied, with respect to any of the following characteristics of property: age, authenticity, genuineness, attribution, provenance, origin, physical condition, importance, size, quality, quantity, rarity, value exhibitions, historical references or significance, medium, material, culture, or source origin. c) All information within any catalog, sale bill, auction listing, advertising, website, or elsewhere is offered to the Bidder as a statement of opinion only. It is not intended to contain statements of fact for which the Auctioneer or its consignor(s) may be held liable. This disclaimer of liability on the Auctioneer's part applies whether the information is included in any catalog, sale bill, or website, and extends any advertisements, announcements, or communications through our representatives, bills of sale, or elsewhere, and regardless of whether written or oral. d) Neither the Auctioneer nor its consignor(s), shall be responsible for the correctness or accuracy of descriptions or other information in any catalog or elsewhere. The Bidder assumes full responsibility to inspect and to evaluate the property to its, his, or her, complete satisfaction prior to any bid or purchase. The Bidder agrees to make an independent judgment about the property, the property's value, and/or property descriptions or any other information about the property, and to bid accordingly. e) The Auctioneer may, without in any way diminishing any disclaimers of liability contained in these terms and conditions, and elsewhere, mention within the description of an item or lot, some significant damage, though this may or may not include all faults, imperfections, and/or restorations. f) The Bidder agrees not to base a bid solely upon information provided by the Auctioneer, or its consignor(s). 5. ONLINE AUCTIONS a) Auctioneer shall not be responsible for internet outages, service disruptions, data lag, or other failures of Bidder's bid placed via the internet. The auctioneer may or may not honor such adversely affected bid attempts, at Auctioneer's sole discretion. b) Auctioneer reserves the right, at Auctioneer's sole discretion, to cancel and/or reopen the auction in the case of system failures. 6. LIABILITY a) Safety of operation of any electrical or otherwise powered devices or items sold is not warranted, or guaranteed, in any way. Auctioneer recommends that all electrical or otherwise powered items sold be checked, installed, and or operated by a licensed electrician or other appropriate technician. b) Items sold could, or could not, meet current, or any other, safety standards. Certain items could subject the operator or installer to various hazards, including, but not limited to, non-polarized plugs, lack of grounding conductors, and/or guards missing, malfunctioning, or not acceptable by modern safety standards. Bidder assumes all responsibility to check with appropriate authorities having jurisdiction regarding any/all local codes regarding such devices. Bidder assumes any and all liability for any installation and/or operation of any item purchased. c) Vintage items are sold with a primary use as collector's items, solely intended for display purposes only and, as such, are not recommended for any other practical use. Vintage items could, or could not, meet any safety standards, could be coated with lead paint, could contain lead, or could be made entirely of lead, and also could contain phthalates, or present choking hazards. Bidder agrees, in compliance with the Consumer Product Safety Improvement Act, to buy vintage items as collectibles for display purposes only, and with no intention of using them, selling them to be used, or of allowing them to be used otherwise. Bidder further agrees to assume all liability and responsibility, and to hold harmless the seller and/or the Auctioneer, in the event of injury, harm, or death to anyone as a result of improper use of any item purchased at auction. Bidders must be over 18 years of age. d) Bidders agree that they, and their guests, are attending the auction sale at the Bidder's own risk, exclusively, and agree to indemnify, save and hold harmless the Auctioneer, and its seller(s) and/or consignor(s), from any and all accidents and/or injuries they may receive while attending the auction sale and/or during pickup of auction items. 7. PARTIAL PAYMENT/ NON-PAYMENT a) Any Bidder who does not pay in full upon presentment of an auction invoice is subject, at the discretion of Auctioneer or its consignor(s), to being barred from any future participation in auctions conducted by Auctioneer. b) Auctioneer reserves the right to void an invoice if payment in full is not received within specified time limits. In cases of nonpayment, Auctioneer's election to void a sale does not relieve the Bidder from its obligation to pay the Auctioneer's fees (seller's and buyer's premium) due on the lot(s), and/or any other damages pertaining to the lot(s). c) In the event that Bidder's payment is dishonored upon presentment(s), Bidder shall pay the maximum statutory processing fee set by applicable State of Oklahoma law. d) If any auction invoice submitted by Auctioneer is not paid in full when due, the unpaid balance will bear interest at the highest rate allowed by law from the date of invoice until paid. Any invoices not paid when due will be subject to a three percent (3%) late fee on the invoice amount, or three percent (3%) of any installment that is past due, should payment be accepted on a past-due invoice. e) If Auctioneer refers any invoice to an attorney for collection, the Bidder agrees to pay all attorney fees, court costs, and/or any other collection costs incurred by Auctioneer. If Auctioneer assigns collection to in-house legal staff, such attorney's time expended on the matter shall be compensated at a rate comparable to the hourly rate of independent attorneys. f) In the event a successful Bidder fails to pay any amount due, Auctioneer, at its sole discretion, reserves the right to sell the lot(s) securing the invoice to any under-bidders in the auction in which the lot(s) appeared, or in subsequent private or public sale, or to re-list the lots in a future auction conducted by Auctioneer. The defaulting Bidder agrees to pay for the reasonable costs of resale (including a 35% seller's commission, if consigned to an auction conducted by Auctioneer). The defaulting Bidder is further liable to pay any difference between his/her/its total original invoice for the lot(s), plus any applicable interest, and the net proceeds for the lot(s), if sold at private sale, or the subsequent hammer price of the lot(s), less the 35% seller's commission, if sold at an Auctioneer's auction. g) Auctioneer shall have a lien against the merchandise purchased by the Bidder to secure payment of the auction invoice. Auctioneer is further granted a lien and the right to retain possession of any other property of the Bidder then held by the Auctioneer or its affiliates, to secure payment of any auction invoice or any other amounts due the Auctioneer or its affiliates from the Bidder. h) With respect to payment of auction invoices, the Bidder waives any and all rights of offset he/she/it might otherwise have against the Auctioneer and/or the consignor of the merchandise included on the invoice. If a Bidder owes Auctioneer or its affiliates on any account, Auctioneer and its affiliates shall have the right to offset such unpaid account by any credit balance due the Bidder, and it may secure, by possessory lien, any unpaid amount by any of the Bidders property then held in the Auctioneer or its affiliates' possession. 8. DISPUTES/ARBITRATION a) Auctioneer shall designate the winning bidder after each item is auctioned. Should any dispute arise between two (2) or more Bidders, regarding any matter, Auctioneer reserves the right, and the Bidders grant Auctioneer the right (solely at Auctioneer's discretion), to re-open bidding on the item in question, and/or to resolve any/all questions through the identification, or designation, of the winning bidder and/or the amount of the winning bid. b) Auctioneer and Bidder hereby agree to submit any dispute between Auctioneer and Bidder, arising out of, or relating to, this agreement, to an arbitration panel of three (3) neutral person selected by Auctioneer. If Bidder disapproves of the panel, Bidder shall, within ten (10) days after receiving notice of selection of the panel, initiate arbitration before the American Arbitration Association (AAA), using its rules for commercial arbitrations, with the exception that all AAA fees shall be paid by Bidder. c) If Bidder fails to timely initiate arbitration through AAA, or to pay AAA fees and costs, Auctioneer may resume arbitration through a neutral arbitration panel selected by Auctioneer. d) The decision of arbitration will be final and binding on all parties. 9. LEGAL ACTIONS a) Notwithstanding anything contained in this agreement to the contrary, Auctioneer hereby reserves the right to seek any action against Bidder in a court of competent jurisdiction b) Any action or suit of any kind relating to this agreement must be commenced within one (1) year from the date when the cause of action or claim accrued, or it shall be forever barred. The right of action or suit shall accrue, and the one-year limitation shall begin to run, at the date upon which the breach, damage, or injury is sustained, and not when the resulting cost, damage, harm, or loss is discovered. c) Auctioneer shall not under any circumstances be liable to Bidder for any consequential damages to Bidder, and Bidder shall not hold Auctioneer liable for failure of any successful Bidder to complete transaction. d) Bidder agrees to be responsible for any and all attorney's fees and/or collection fees incurred by seller or Auctioneer as a result of any disputes or actions brought on by Bidder with regard to any auction or auction item. 10. SALES TAX a) When sales tax is applicable, Bidder agrees to pay the Auctioneer the actual amount of tax due in any event where sales tax is not properly collected due to an expired, inaccurate, inappropriate text certificate or declaration, or due to any incorrect interpretation of the applicable statute, or due to any other reason. b) When sales tax is applicable, the appropriate forms or certificate must be on file with and verified by, the Auctioneer five (5) days prior to the auction, or sales tax must be paid. Only if such form or certificate is received by the Auctioneer within four (4) days after the auction, can a refund of sales tax paid be made. Lots originating from different auctions may not be aggregated for sales tax purposes. c) Any motor vehicles offered for sale or subject to any and all applicable state titling and tax laws. Bidder agrees to be responsible for complying with these laws. 11. GOVERNING LAW & JURY WAIVER a) This agreement shall be governed by, and construed in accordance with, the laws of the State of Oklahoma, and any action or proceeding arising hereunder shall be brought in the courts of the State of Oklahoma. b) If any such action or proceeding arises under the Constitution, laws, or treaties of the United States of America, or if there is a diversity of citizenship between the parties hereto, so that suit may be brought in a United States District Court, it shall be brought to the United States District Court in Arapaho, Oklahoma. c) The invalidation of one or more terms of this agreement shall not affect the validity of the remaining terms. d) Auctioneer and its seller(s) hereby waive the right to any jury trial in any action, proceeding, or counterclaim in connection with this agreement brought by either party against the other party. 12. SEVERABILITY Except as expressly provided to the contrary herein, each section, part, term and/or provision of this agreement shall be considered severable; and if, for any reason any section, part, term or provision herein is determined to be invalid, unenforceable or contrary to, or in conflict with, any existing or future law or regulation by a court or agency having valid jurisdiction, such shall not impair the future operation of, or have any other effect upon, such other sections, parts, terms and provisions of this agreement as may remain otherwise intelligible, and the latter shall continue to be given full force and effect and bind the parties hereto; and said invalid or unenforceable sections, parts, terms or provisions shall be deemed to be replaced with a provision that is valid and enforceable and most merely reflects the original intent of the invalid or unenforceable provision.
Chevrolet Dealership Liquidation. This is the first of two personal property auctions selling the GM specialty tools from a Chevrolet dealership in Cordell, OK. There are hundreds of Kent-Moore specialty tools for sale.

1
Bidding is open from Aug. 2nd thru Aug. 20th
*Online bidding begins Thursday, Aug. 2nd at 8:00 am CDT *Bids begin closing Monday, Aug 20th at 6:00 pm CDT; all items have a 3-minute soft close and are set to close every 20 seconds.

2
Pickup Location & Dates
*Pick up is on Wednesday, August 22nd from 10:00 am to 3:00 pm (CDT) or on Friday, August 24th from 8:00 am to 1:00 pm (CDT). *Winning Bidders can pick up their purchases at 1707 Glenn English Street, Cordell, OK 73632. *There will not be a pickup ...

268

269
EN-46745
Wrist Pin Clip Replacer

270
EN-4699-10
CH-48482, J-45104, DT-49139, J-21370-10

272
J-46629-A
Installer, Axle Seal, & J-8092

273
EN-48108
GM Rear Main Seal Installer

274
EN-47909
Injector Bore Brush Kit

275
DT-47865
Housing Bearing Remover

276
BO-48206
Dispensing Gun, 2-Part Adhesive

277
EN-48051
Valve Spring Compressor & EN-48383 Camshaft Retaining Tool

278
DT-47857
Center Support Bearing Installer, DT 74866 Housing Bearing Installer, CH-47954-2, CH047954-3, J-33844, EN-49942

279
DT-47779
DT-47867, DT-47770, DT47779,

280
J-44375
Assembly Pallet

281
BO-47549
Seat Belt Retainer Bolt, & CH 51064 Feul Pressure Gauge Adapter, & BO 47666 Hydraulic Clip Installer

282
J-46091-10
Charge Air Cooler Tester Adapter & J-46091-5 Charge Air Cooler Test Adapter, J-46091 Inner coller tester

283
J-45999
Cup/Coin Holder Removal Tool

284
J-46091-15
Engine Pressure Test Adapter

286
EN-47518
Holder, Camshaft Sprocket

287
DT-47768
Turbine Shaft Seal Installer

288
J-45756
DT-47791-A, J-46405, DT-47715, DT-47521, J-49154

289
CH-48600
P/S Analyzer Adapters

290
DT-47732
Axle Boot Swage Clamp

291
DT-47782
Housing Snap Ring installer

292
DT-47761
2 - 6 Clutch spring compressor

293
BO-47869
Lock Cylinder Staking tool

294
EN-47971
Oil pressure gauge pre-luber adapter

295
GE-47829
Slide hammer extension

296
EL-47749
Coax antenna test adapters

297
GE-47742
A/C switch test adapter

300
J-21362
Clutch Inner Seal Protector

301
J-21363
Clutch Inner Seal Protector

302
J-21426
EXT Housing oild seal installer

303
J-21370-A
Band Apply Pin Gauge

304
J-21474-18
control arm bushing nut tool

305
J-21474-19
Puller Bolt/Thrust Bearing

306
J-21777-1
Body & Pin Assembly

307
J-21777-29
Pinion Setting Gauge Plate

308
J-21777-36
Gauge Plate

309
J-21777-45
Side bearing disc

310
J-21777-85
Gauge Plate

311
J-21777-86
Gauge Disc

312
J-21854-A
Pivot Pin Remover

313
J-21867-6
Oil Pressure gauge adapter

314
J-21867-850
Oil Pressure adapter

315
J-21867-65
Oil pressure gauge adapter

316
J-21867-16
Loma oil pressure gauge adapter

317
J-21867-50
Transmission pressure gauge adapter

318
J-22144
Suction tube installer

319
J-22610
Plier, Clamp Remover/Installer

320
J-22888-D
Side bearing remover set

321
J-23028-15
Coil spring R/I adapter

322
J-23129
CONV housing seal remover

323
J-23444-A
Extreme pressure lubricant

324
J-23597-1
Body & plunger assembly

325
J-23656-SIR
Column Lock plate compressor

326
J-24086-920A
Piston pin fork insert

327
J-24086-310
Piston pin R/I adapter

328
J-23656-D
Steering Column Lock Plate Compressor Tool

329
J-23653-91A
Cancel Cam plate compressor

330
J-21867
pressure gauge

331
J-24086-900A
Piston Pin Remover Installer Adapter tool

332
J-25234
installer, bearing

333
J-24773-A
End play check fixture

334
J-24426
Outer Wheel Bearing Cup Installer Gmt800 3500 Series

335
J-24086-920A
Piston fork insert

336
J-42640
Steering column anti rot pin

337
J-26508
Rear Transmission Seal Installer

338
J-26999-20
Compression gauge adapter

340
J-25695-10
Oil Pressure Gauge Adapter

341
J-26958-10A
Load tool mounting adapter & J-26958-11A output shaft load tool adapter

342
J-28467-20
engine support fisture adapter set

343
J-28467-400
engine support fixture bracket

344
J-28467-200A
engine support system

345
J-28467-50
engine support hook & J-44586

346
J-29829-1A
seal protector

347
J-28721-902
Wheel Bearing Nut Wrench 6-Point

348
J-29803-A
ISO flaring tool kit

349
J-29714-A
servo cover depressor

350
J-29658-500
fuel pressure gauge

351
J-33381-A
final drive remover & installer

352
J-29882
overrun clutch inner seal protector

353
J-29883
Forward Clutch inner seal protector

354
J-33008
axle shaft remover

355
J-33025-97
a/c puller leg adapter

356
J-33037
intermediate band apply pin gauge

357
J-33386-A
input shaft end play gauge

358
J-34013-88A
strut compressor adapter

359
J-33386-1A
input shaftend play gauge pin

360
J-33984-A
Radiator test adapter

361
J-34013-900
strut alignment rod

362
J-34013-970
strut compressor adapter set

363
J-34013-197
strut alignment rod

364
J-34095
shaft loading tool adapter

365
J-34741-2
Seal Pusher Assembly

366
J-34686
Rear main oil seal installer

367
J-34730-230
Poppet Valve Test Device

368
J-347141-A
input shaft seal installer

369
J-35354-A
Front Cover seal installer

370
J-35468
front cover seal installer

371
J-35566
boot clamp pliers

372
J-35589-3
master cylinder bleeder adapter

373
J-35616-20F
wire fused jumper kit

374
J-35616-710
test probe update kit

375
J-34013-197
strut compressor alignment rod

376
J-35639-90
Pass Adapter harness

377
J-35628-210
pass key tester adapter set

378
J-35731
fuel tank sending unit wrench

379
J-35667-9
cylinder leakdown test adapter

380
J-35944-A
Transmission Cooler Flusher

381
J-36615-A
side bearing adjusting nut wrench

382
J-35999
spring scale

383
J-36018
belt tension gauge

384
J-36169-HD
heavy duty fused jumper wire

385
J-36202-A
torsion bar unloader

386
J-36221
hydraulic clutch line separator

387
J-36418-1B
seal protector

388
J-36547
input shaft seal installer

389
J-36649
adaptor-surge tank cap

390
J-35800-A
cleaner,fuel injection

391
J-37287
fuel line shut off adapters

392
J-36652-98
drive axle swage tool

393
J-36792
rear crankshaft oil seal installer

394
J-36995-A
balance shaft bearing installer

395
J-36996
balance shaft installer

396
J-37027-1A
IAC tester

397

398
J-37105-C
front hub service set

399
J-37361
clutch piston seal protector

400
J-37362
clutch piston seal protector

401
J-37789-A
oil pump assembly R & I

402
J-37808-55
SRS load tool adapter set

403
J-377979
J-37979-A

404
J-38118
rear wheel toe adjust tool

405
DT-47624
long cooler line removal tool

406
J-38125-760
terminal kit

407
J-38125-SIR/SRS
Terminal repair kit supplement

408
J-38358-A
clutch assy final drive R & I

409
J-38385
output shaft load tool adapter

410
J-36541-A
steering wheel puller legs

411
J-38678-A
2nd clutch piston seal installer

412
J-38715-50
SIR load tool adapter

413
EL-38715-140
SIR load tool adapter

414
EL-38715-145
SIR load tool adapter

415
EL-38715-160
SIR load tool adapter

416
J-38720
steering wheel puller

417
J-38733-A
direct clutch assembly R & I

418
J-38735
support seal prot/inst/sizer

419
J-38736
seal installer/sizer/pusher

420
J-38739
oil pump assembly remover

421
J-38758
parasitic draw test switch

422
J-38826
SIR deployment harness

423
J-388256-45
SIR deployment harness

424
J-38864
door module coild spring tool

425
J-39054-450
fuel injector test adapter

426
J-39195
end play checking tool

427
J-39348
fuel tank sending unit wrench

428
J-39440
extension housing seal installer

429
J-39579
camshaft gear holder

430
J-39439
replacer, shift rail bushing

431
J-39511
remover, bearing

432
J-39700-650
breakout box adapter

432
J-39700-650
breakout box adapter

433
J-39700-15
anti lock brake/traction control system adapter cable

433
J-39700-15
anti lock brake/traction control system adapter cable

434
J-39937
timing cover seal installer

434
J-39937
timing cover seal installer

435
J-39441
installer

435
J-39441
installer

436
J-39775
jumper harness

436
J-39775
jumper harness

437
J-35798
pressure bleeder adapter

437
J-35798
pressure bleeder adapter

438
J-41088
balance shaft holding plate

438
J-41088
balance shaft holding plate

439
J-41094
extension housing seal installer

439
J-41094
extension housing seal installer

439
J-41172
pinion seal installer

440
J-41230
holding fixture

441
J-41231
seal installer

441
J-41231
seal installer

442
J-41234
seal installer set

442
J-41234
seal installer set

443
J-41235
retainer installer

443
J-41235
retainer installer

444
J-41239-A
cooler pipe seal installer

444
J-41239-A
cooler pipe seal installer

445
J-41336
radiator pressure test adapter

445
J-41336
radiator pressure test adapter

446
J-41340-A
lock cylinder holding fixture

446
J-41340-A
lock cylinder holding fixture

447
J-41348
bearing cap remover

447
J-41348
bearing cap remover

448
J-41349
rear housing aligner

448
J-41349
rear housing aligner

449
J-41352
modular column holding fixture

450
J-41352-97
column holding fixtture

451
J-41364-A
NSBU alignment tool

451
J-41364-A
NSBU alignment tool

452
J-41371
reluctor gear puller

452
J-41371
reluctor gear puller

453
J-41396
park lock cable pliers

453
J-41396
park lock cable pliers

454
J-41398
C.V. joint puller

454
J-41398
C.V. joint puller

455
EN-46999
D.O.D. tester

455
EN-46999
D.O.D. tester

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

456
551804
SPX Servoce Solutions p/n 551804 3.6V NIMH

457
J-41427
engine lift backet

457
J-41427
engine lift backet

458
J-41450-B
CS generator tester

458
J-41450-B
CS generator tester

459
J-41479-2A
seal installer pilot

460
J-41507
connecting rod assembly guide

461
J-41510
converter housing torx bit

461
J-41510
converter housing torx bit

462
J-41512
valve seal installer

462
J-41512
valve seal installer

463
J-38125-750
terminal repair kit

463
J-38125-750
terminal repair kit

466
J-21474
control arm bushing set

466
J-21474
control arm bushing set

467
J-41663
NVG assembly pallet

467
J-41663
NVG assembly pallet

468
J-41545
Park Neutral position switch

468
J-41545
Park Neutral position switch

469
J-41546
coolant pump gear installer

469
J-41546
coolant pump gear installer

470
J-41552
compressor pulley puller

470
J-41552
compressor pulley puller

471
J-41558-10UPD
gear remover adapter bolts

472
J-41618
brake bleeder adapter set

473
J-41623-B
cooler line disc

474
J-41676
FRT output shaft bearing inst adpt

475
J-41677
FRT output shaft bearing rem adpt

476
J-41678
front input bearing remover

477
J-41679
front input bearing installer

478
J-41681
clutch spring compressor

479
J-41688
centering sphere installer

480
J-41760
low tire sensor programing tool

481
J-41778
pump bushing service kit

482
J-41790-A
compressor holding fixture

483
J-41798
engine lift backets

484
J-41819
input shaft seal installer

485
J-41990
fuel displacement gage

486
J-41991
driveshaft bearing R & I

487
J-42214-A
Headrest removal tool

488
J-41992
2nd clutch piston installer

489
J-41998-B
Harmonic balancer installer

490
J-42037
valve spring comp. adapter

491
J-42038
camshaft holders

492
J-42039
valve spring compressor

493
J-42041
front cover/balancer installer

494
J-42042
camshaft timing holder

495
J-42055
trans jack adapter

496
J-42067
rear main seal installer

497
J-42073
valve stem seal installer

498
J-42109
valve stem seal installer

499
J-42113
shorting bar lifitng tool

500
J-42119
spindale nut wrench set

501
J-421020
steering wheel puller legs

502
J-42188-B
ball joint separator

503
J-42136
A/C shaft seal remover

504
J-42137
cam orientation plate adapter

505
J-42211
axel bearing installer

506
J-42213
side bearing adjuster wrench

507
J-42236-A
date bus diagnostic tool

508
J-42385-2022
timesert drill bushing

509
J-42372
Headrest removal tool

510
J-42393
torsion bar unloader

511
J-42401
radiator pressure adapter

512
J-42402
connector back bolt remover

513
J-42450-A
hub resurfacing kit

514
J-42467
power steering pulley remover

515
J-42468
front strut mount nut wrench

516
J-42478
engine support adapters

517
J-42506
sliding door handle remover

518
J-42562
axle remover wedge

519
J-42578
steering wheel puller legs

520
J-47275
harness, 4th Gen TCM breakout

521
J-42598
vehicle data recorder

522
J-44755
assembly holding fixture

523
DT-47785
oil fill adapter

524
GE-47716-20
adapter cooling system

525
GE-50389
quicdk connect assebly adapter

526
DT-47791
installer, converter seal

527
BO-48370
lock cylinder cap installer

528
Chev 5S-BLS
bin label service strip

529
Common-BLS
bin label service strip

530
CH-48027-9
adapter, oil pressure test

531
EL-48028
XM radio test antenna

532
CH-48051
parking brake actuator

533
CH-48894
pliers, drive axle clamp

533
CH-48894
pliers, drive axle clamp

534
DT-48285
vavle body torx plus socket

534
DT-48285
vavle body torx plus socket

535
EN-48565
EGR test harness

535
EN-48565
EGR test harness

536
CH-48650
P/S analyzer adapters

536
CH-48650
P/S analyzer adapters

537
EN-48694
compression gauge adapter

537
EN-48694
compression gauge adapter

538
EN-48749
retainer, timing chain

538
EN-48749
retainer, timing chain

539
EN-48896
alignment gauge, fuel pump installation

539
EN-48896
alignment gauge, fuel pump installation

540
EN-48953
cam phaser retainer

540
EN-48953
cam phaser retainer

541
EN-48974
adapters, EGR cooler test

542
EN-48974-20
EGR cooler test adapter set

543
EN-49102
remover, main bearing cap

543
EN-49102
remover, main bearing cap

544
DT-49101
installer, manual shaft seal

544
DT-49101
installer, manual shaft seal

545
DT-47790
installer, axle seal

545
DT-47790
installer, axle seal

545
EL-49903
test tool

545
EL-49903
test tool

546
BO-49753
fixture, lock cylinder retaining

546
BO-49753
fixture, lock cylinder retaining

547
KM-422
Camshaft seal installer

547
KM-422
Camshaft seal installer

548
KM-635
crank rear oil seal installer

548
KM-635
crank rear oil seal installer

549
KM-460-b
axle shaft remover

549
KM-460-b
axle shaft remover

550
KM-507-C
ball joint remover pontiac G3

551
KM-508-A
lower control arm bushing replacer for GM

552
KM-158
front lower control arm bushing remover installer set

552
KM-158
front lower control arm bushing remover installer set

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

553
KM-266-A
TDC sensor for sleeve/starter bearing remover/installer

554
KM-653-A
adapter valve spring compressor

554
KM-653-A
adapter valve spring compressor

555
EN-50721
installer, stretchy belt

555
EN-50721
installer, stretchy belt

556
KM-108
remover/installer

556
KM-108
remover/installer

557
EN-48932
compressor, belt tensioner

557
EN-48932
compressor, belt tensioner

558
EN-49982
retainer, timing chain

558
EN-49982
retainer, timing chain

559
EN-49010
holder, flywheel

559
EN-49010
holder, flywheel

560
EL-49257
harness, inflator diagnostic

561
DT-47811-A
lift plate, transaxle

564
KM-6009
replacer, ignition coil

564
KM-6009
replacer, ignition coil

565
KM-6333
rod, timing belt tensioner retaining

565
KM-6333
rod, timing belt tensioner retaining

566
KM-6340
lock, camshaft gear

566
KM-6340
lock, camshaft gear

567
KM-6351
installer, crankshaft front seal

567
KM-6351
installer, crankshaft front seal

568
KM-6625
lock, flywheel

568
KM-6625
lock, flywheel

569
KM-6628-A
lock, comshaft

569
KM-6628-A
lock, comshaft

570
EN-48853
aligner, front cover

570
EN-48853
aligner, front cover

571
CH-47950
hydro-boost checking tool

571
CH-47950
hydro-boost checking tool

572
EN-49247
fuel rail clip installer

573
EN-49245
injector seals inst/sizer

574
EL-48571-A
HV battery pin out box & EL-48571-30, adapter, HV pinout box

575
EN-49774
injector remover

576
CH-49736
quick connect 3/16' release

577
EN-49761
valve stem seal installer

578
DT-49861
installer, pump seal

579
EN-49977
fixation sensor discs

580
KM-952
guide, crankshaft TDC position

581
KM-953-A
guide, crankshaft TDC position

582
Dt-49291
clutch passage plug kit

583
J-43649
valve spring compressor Dp19

584
J-8062-5
valve spring comp adapter

585
EN-50717-10
valve spring compressor adapters

586
CH-49824
separator, steering linkage

587
CH-50636
socket, axle hub bearing nut

588
EL-50334-11EN-50334-50
kit, infotainment adapter

589
EN-46091-15A
adapter, diesel engine pressure test

590
J-44853
rear clutch pack seal/pinion seal installer flush adapter

591
KM-6263-27
clutch pilot

592
DT-49743
adapter, low clutch spring compressor

593
J-6125-B
slide hammer ser with adapters

594
EN-47988
serpentine belt tension unloader