Aluminum Processing Industries, Inc.
Listing ID#: 253265

Sale Location

Lapeer, MI 48446
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Jun 24, 9:00 AM
Bidding Ends: Tuesday Jul 16, 11:30 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Aucto.com

Contact: Omer Hassan
Phone: 1-844-326-7339
Email: sellers@aucto.com
Website: www.aucto.com

EstateSale.com ID#: 10620
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
ONLINE TIMED AUCTION-
Aluminum Processing Industries, Inc.
840 Whitney Drive, Lapeer, Mi. 48446
Lots begin closing at 11:30 am, July 16, 2019

INSPECTION DATE: July 15, 2019, 8:30am-4:30pm at address listed above.

Removal Dates: July 17, 18 & 19, 2019 from 8:30am-4:30pm. By appointment there after.

Terms & Conditions for Aluminum Processing Industries Online Timed Auction are:
-There is a 18% Buyers Premium applied to on-line bidders who purchase at this sale.
-Please enter your Credit Card Information When You Register. CREDIT CARDS WILL NOT BE ACCEPTED FOR FINAL PAYMENT.
-NOTICE: ALL BIDDERS AND OTHER PERSONS BIDDING AT THIS SALE AGREE THAT THEY HAVE READ AND HAVE FULL KNOWLEDGE OF THESE TERMS AND AGREE TO BE BOUND THEREOF!
-IDENTIFICATION - All purchasers are required to give their full name, company name, permanent address (NO PO BOXES WILL BE APPROVED), phone number and signature.
-TERMS: The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain to the fitness or use of the asset as being purchased.
-CONDITION OF ARTICLES SOLD - The auctioneer shall not be held responsible for the correct description, genuineness, authenticity of or defect in any lot, and makes no warranty in connection therewith. No sale will be set aside or allowance made for any incorrectness, error in cataloging or any imperfection not noted. No allowances or deduction will be made on damaged articles. All goods are exposed for public exhibition and sold "AS-IS" "WHERE-IS" and without recourse.
Listing Information

Complete Liquidation of Aluminum Processing Equipment, Inc.

 

Register & Bid here: https://www.aucto.com/auction/aluminum-processing-industries-inc/10418

 

Featured Equipment Includes:

  • Lot :1 - 24-Drawer Bin Cabinet with Partial Bolt and Screw Contents
  • Lot :2 - 23-Drawer Bin Cabinet
  • Lot :3 - 24-Drawer Bin Cabinet with Bolt and Screw Contents
  • Lot :5 - 24-Drawer Bin Cabinet with Taper Shank Drill Contents
  • Lot :6 - 24-Drawer Bin Cabinet with Straight Shank and Taper Shank Drill
  • Lot :7 - 23-Drawer Bin Cabinet with Partial Drills and Bushings Contents
  • Lot :8 - 18-Drawer Bin Cabinet with Bushings Contents
  • Lot :9 - Lot-Go/Nogo Gauges with (6) Stands on (1) Shelf
  • Lot :10 - 24-Drawer Bin Cabinet with Partial Go/No Gauges and Setup Contents
  • Lot :11 - 18-Drawer Bin Cabinet with Drills, Reamers and Collets Contents
  • Lot :12 - 24-Drawer Bin Cabinet with Bushings, Pins and Drill Contents
  • Lot :13 - 24-Drawer Bin Cabinet with Bushings Contents
  • Lot :14 - STANLEY VIDMAR 7-Drawer Tooling Cabinet
  • Lot :15 - STANLEY VIDMAR Style 7-Drawer Tooling Cabinet
  • Lot :16 - STANLEY VIDMAR STYLE 5-Drawer Tooling Cabinet
  • Lot :17 - Lot-Hand Tools on (1) Table, Drill Wedges and Chuck Keys Not
  • Lot :18 - Lot-Chuck Wedges and Keys In (2) Boxes
  • Lot :19 - JUSTRITE Oily Waste Can Under (1) Table
  • Lot :20 - Lot-Plastic Tubing In (2) Boxes Under (1) Table
  • Lot :20A - CRAFTSMAN 3-Drawer Flip Top Toolbox Under (1) Table
  • Lot :21 - AIR KING 18" Shop Fan with Wall Mounting Bracket Under (1) Table
  • Lot :22 - Lot-Allen Wrenches in (1) Box
  • Lot :23 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :24 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :25 - Lot-Allen Wrench Sets in (1) Box
  • Lot :26 - Lot-Mechanic Wrenches in (2) Boxes
  • Lot :27 - Lot-Hand Stamps and Drill Punches in (1) Box
  • Lot :28 - CRAFTSMAN Model 973.114240 14.4-Volt 3/8" Cordless Drill
  • Lot :29 - Lot-Bearings and O-Rings in (2) Boxes
  • Lot :30 - WELDON Axial Relieving Fixture with Case
  • Lot :31 - HUSKY 6' Fiberglass Step Ladder
  • Lot :32 - HUSKY 12' Fiberglass Step Ladder
  • Lot :33 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :34 - Lot-(5) Large Tapered Shank Drills in (1) Box
  • Lot :35 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :36 - Lot-(7) Large Tapered Shank Drills in (1) Box
  • Lot :37 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :38 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :39 - Lot-Tapered Shank Drills in (1) Box
  • Lot :40 - Lot-Tapered Shank Drills in (1) Box
  • Lot :41 - Lot-Tapered Shank Drills in (1) Box
  • Lot :42 - Lot-Tapered Shank Drills in (1) Box
  • Lot :43 - Lot-Tapered Shank Drills in (1) Box
  • Lot :44 - Lot-Tapered Shank Drills in (1) Box
  • Lot :45 - Lot-Packaged Drills in (1) Box
  • Lot :46 - Lot-Packaged Drills in (1) Box
  • Lot :47 - Lot-Large Reamers in (1) Box
  • Lot :48 - Lot-(7) Large Straight Shank Drills in (1) Box
  • Lot :49 - Lot-(4) Large Straight Shank Drills in (1) Box
  • Lot :50 - Lot-Straight Shank Drills in (1) Box
  • Lot :51 - Lot-Straight Shank Drills in (1) Box
  • Lot :52 - Lot-Straight Shank Drills in (1) Box
  • Lot :53 - Lot-Production Drills in (1) Box
  • Lot :54 - Lot-Straight Shank Drills in (1) Box
  • Lot :55 - Lot-Straight Shank Drills in (1) Box
  • Lot :56 - Lot-Straight Shank Drills in (1) Box
  • Lot :57 - Lot-Straight Shank Drills in (1) Box
  • Lot :58 - Lot-Step Shank Drills in (1) Box
  • Lot :59 - Lot-Packaged Taps in (1) Box
  • Lot :60 - Lot-Taps in (1) Box
  • Lot :61 - Lot-Taps in (1) Box
  • Lot :62 - Lot-Taps in (1) Box
  • Lot :63 - Lot-Taps in (1) Box
  • Lot :64 - Lot-Taps in (1) Box
  • Lot :65 - Lot-Counterbores in (1) Box
  • Lot :66 - Lot-Reamers and Center Drills in (1) Box
  • Lot :68 - Lot-Gun Drills in (1) Box
  • Lot :69 - Lot-Gun Drills in (1) Box
  • Lot :70 - Lot-Gun Drills in (1) Box
  • Lot :71 - Lot-Gun Drills in (1) Box
  • Lot :72 - Lot-Gun Drills in (1) Box
  • Lot :73 - Lot-Drill Sleeves in (1) Box
  • Lot :74 - Lot-Drill Sleeves in (1) Box
  • Lot :75 - Lot-Drill Sleeves in (1) Box
  • Lot :76 - Lot-Drill Sleeves in (1) Box
  • Lot :77 - Lot-Drill Sleeves in (1) Box
  • Lot :78 - Lot-Drill Sleeves in (1) Box
  • Lot :79 - Lot-Drill Collets in (1) Box
  • Lot :80 - Lot-Drill Collets in (1) Box
  • Lot :81 - Lot-Drill Collets in (1) Box
  • Lot :82 - Lot- Spindles in (1) Box
  • Lot :83 - Lot-Spindles in (1) Box
  • Lot :84 - Lot-Quick Change Spindles in (1) Box
  • Lot :85 - Lot-Quick Change Spindles in (1) Box
  • Lot :86 - Lot-Spindles in (1) Box
  • Lot :87 - Lot-Swivel Spindles in (1) Box
  • Lot :88 - Lot-Swivel Spindles in (1) Box
  • Lot :89 - Lot-Swivel Spindles in (1) Box
  • Lot :90 - Lot-Swivel Spindles in (1) Box
  • Lot :91 - Lot-Spindles in (1) Box
  • Lot :92 - Lot-Quick Change Adaptors and Sleeves in (2) Boxes
  • Lot :93 - Lot-Spindles in (1) Box
  • Lot :94 - Lot-(4) Tap Holders in (1) Box
  • Lot :95 - Lot-Tool Holders in (1) Box
  • Lot :96 - Lot-Spindles in (1) Box
  • Lot :97 - Lot-(5) Tool Holders in (1) Box
  • Lot :98 - Lot-Spindle Arms in (1) Box
  • Lot :99 - Lot-Spindle Arms in (1) Box
  • Lot :100 - Lot-Spindle Arms in (1) Box
  • Lot :101 - Lot-(2) Jacobs No. 20N Drill Chucks and (1) Die Holder in (1) Box
  • Lot :102 - Lot-(3) Asst'd Drill Chucks in (1) Box
  • Lot :103 - Lot-(6) Asst'd Drill Chucks in (1) Box
  • Lot :104 - Lot-JACOBS Chuck Jaws, Sleeves and Arbors in (1) Box
  • Lot :105 - Lot-R8 Hlder with Boring Head, R8 Holder with Face Mill and 30-Taper
  • Lot :106 - Lot-(12) R8 Collets in (1) Box
  • Lot :107 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :108 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :109 - ETTCO Tapping Head
  • Lot :110 - ETTCO Model 2B Tapping Head, S/N B-14219
  • Lot :111 - Lot-Hold Down Tooling in (6) Boxes with Stand
  • Lot :112 - Lot-Bushings, Sleeves and Asst'd Hardware in (11) Boxes
  • Lot :113 - 24-Drawer Bin Cabinet with Change Gears Contents, (Shelving Not
  • Lot :114 - Lot-Fixture Plates on (1) Section Shelving, (Shelving Not Included)
  • Lot :115 - Lot-(2) Sections Shelving 58"H X 38"W X 18"D, (Contents Not
  • Lot :116 - BRIDGEPORT 6" Machine Vise
  • Lot :117 - 6" Machine Vise
  • Lot :118 - WILTON 6" Machine Vise
  • Lot :119 - SPEED VISE 6" Machine Vise
  • Lot :120 - SPEED VISE 6" Machine Vise
  • Lot :121 - SPEED VISE 6" Machine Vise
  • Lot :122 - SPEED VISE 6" Machine Vise
  • Lot :123 - 58"L X 29 1/2"W Portable Steel Cart with 5" Bench Vise, (Machine
  • Lot :124 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :125 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :126 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :127 - Lot-(6) Lead Screws in (1) Box
  • Lot :128 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :129 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :130 - Foot-Operated Hydraulic Lift Cart, 18" x 28" Platform
  • Lot :131 - 4-Wheel Drum Cart
  • Lot :132 - Lot-(2) Drum Dollies
  • Lot :133 - RIDGID 5-HP 16-Gallon Shop Vac with Attachments
  • Lot :134 - Hand Pump Operated Grease Pump with Grease
  • Lot :134A - HUSKY 1550-PSI Electric Cold Water Portable Pressure Washer
  • Lot :135 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :136 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :137 - 24" Wide by 48"H, Portable Stairs
  • Lot :138 - Shop Desk
  • Lot :139 - CLAUSING 900-1,800 RPM 20" Model 22V-1, 4-Head Production Drill
  • Lot :140 - ROCKWELL DELTA 20" 2-Head Production Drill Table, (2) Drill Press
  • Lot :141 - CHAS G. ALLEN 24" Single Spindle Lead Screw Tapping Machine
  • Lot :142 - ROCKWELL Model 71-600, 17" Floor Standing Production Drill;
  • Lot :143 - MILMAN MODEL T-300, 24" Floor Type Production Drill, S/n 30077,
  • Lot :145 - GOVRO NELSON MODEL 300, 18" Floor Type Drill Press,
  • Lot :146 - DELTA ROCKWELL MODEL 17-600, 17" Floor Type Drill Press,
  • Lot :147 - BRIDGEPORT 1 1/2-HP Variable Speed Vertical Milling Machine,
  • Lot :149 - PRO-CUT MODEL FR8OUC180AJ, 7" Horizontal Metal Cutting Band
  • Lot :150 - GOVRO NELSON (4) Head Drilling & Tapping Machine, Consisting of
  • Lot :151 - GOVRO NELSON 3-Head Horizontal Drilling and Tapping Machine,
  • Lot :152 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :153 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :154 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :155 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :156 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :157 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :158 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :159 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :160 - Onsrud Model MM-48, 48" 5-Station Rotary Surface Index Milling
  • Lot :161 - ELDORADO MODEL M751036, Horizontal Precision Deep Hole Gun Drilling
  • Lot :162 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-463,
  • Lot :163 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-431,
  • Lot :164 - Speedfam Thru Feed Grinder, S/n 625-TFG-275, Magnet Hold,
  • Lot :165 - Speedfam Thru Feed Grinder, S/n 625-TFG-228, Magnet Hold,
  • Lot :166 - CYCLOTRON Grinding Sludge Filtration System, S/n 1378
  • Lot :167 - POWER PACK Model 4-DL-6, 50"L X 6"W Motorized Nylon Belt
  • Lot :168 - VERSA FERGUSON 72"L X 6"W Motorized Nylon Belt Conveyor,
  • Lot :169 - Lot-Fixtures on (4) Sections, (Face Side Only), (Shelving Not Included)
  • Lot :170 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :171 - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :172 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :172A - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :173 - Lot-(12) Cartridge Plates in (2) Stacks on (1) Shelf
  • Lot :174 - Lot-Lead Screws on (1) Shelf
  • Lot :175 - Lot-Lead Screws on (1) Shelf
  • Lot :176 - Lot-Lead Screws on (1) Shelf
  • Lot :177 - Lot-Lead Screws on (1) Shelf
  • Lot :178 - Lot-(18) Bins with Misc. Hardware Contents on (3) Shelves,
  • Lot :179 - Lot-(13) Empty Bins on (3) Shelves
  • Lot :180 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :181 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :182 - Lot-(7) Cartridge Plates on (1) Shelf
  • Lot :183 - Lot-(12) Cartridge Plates on (1) Shelf
  • Lot :184 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :185 - Lot-(13) Cartridge Plates on (1) Shelf
  • Lot :186 - 2-Door Supply Cabinet with Misc. Machine Parts
  • Lot :187 - 2-Door Supply Cabinet with Misc. Machine Attachment Contents
  • Lot :188 - Lot-Fixtures with (2) Sections Shelving
  • Lot :189 - 2-Door Supply Cabinet with Electrical Contents Including
  • Lot :190 - SULLAIR Model LS-10-25H AC, 25-HP Rotary Screw Packaged
  • Lot :191 - SULLAIR Model SRD-125 AC, Refrigerated Compressed Air Dryer,
  • Lot :192 - NISSAN Model KCFH02A25V 4,700-LB Capacity x 187" Lift Capacity,
  • Lot :193 - HYPNEUMAT Model LS300E Lead Screw Tap Unit on (1) Pallet on
  • Lot :194 - Lot-(7) Wire Baskets with Carts
  • Lot :195 - Lot-(4) Wire Baskets with Carts
  • Lot :196 - Lot-(10) Wire Baskets on (1) Top Shelf
  • Lot :197 - Lot-(6) Wire Baskets with (1) Cart Under (1) Section Pallet Rack
  • Lot :198 - Lot-(4) Wire Baskets with Carts Under (1) Section Pallet Rack
  • Lot :199 - Lot-(9) Wire Baskets on (1) Top Shelf
  • Lot :200 - Lot-(12) Wire Baskets on (1) Top Shelf
  • Lot :201 - Lot-Empty Plastic Totes and Steel Parts Bins on (1) Shelf
  • Lot :202 - Lot-(2) Sections of Pallet Rack 144"H X 108"W X 36"D, (Contents Not
  • Lot :203 - Lot-(2) Sections of Pallet Rack 120"H X 96"W X 42"D, (Contents Not
  • Lot :204 - 75"H X 60"W X 36"D Barrel Rack
  • Lot :205 - Welding Curtain
  • Lot :206 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D
  • Lot :207 - Lot-(2) Sections of Shelving 75"H X 36"W X 18"D
  • Lot :208 - Lot-(8) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :209 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :210 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :211 - Lot-(2) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :212 - BENDIX CORDAX Model 1000, Coordinate Measuring Machine,
  • Lot :213 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :214 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :215 - Lot-STARRETT 18" Vernier Height Gage with STARRETT 10"
  • Lot :216 - 14"L X 10"W Steel Surface Plate
  • Lot :217 - 9"L X 8"W X 6"H Riser Cube
  • Lot :218 - FEDERAL Dial Indcator with Parts in (1) Box
  • Lot :219 - Lot- Angle, Honeycomb Blocks and Indicator Stands in (1) Box
  • Lot :220 - Hold Down Set with Stand
  • Lot :221 - Lot-Asst'd Inspection in (1) Box
  • Lot :222 - Go/No Go Gages in (1) Box
  • Lot :223 - Refractometer with Simpson Model 372, OHM Meter
  • Lot :224 - Lot-(2) FEDERAL Digital Indicators with Base and (1) FEDERAL
  • Lot :225 - 10-Drawer Bin Cabinet with Pin and Block Gages
  • Lot :226 - STARRETT 36"L X 24"W X 6"D 2-Ledge Granite Surface Plate
  • Lot :227 - GE Refrigerator with Microwave
  • Lot :228 - Lot-Round Table with (4) Chairs
  • Lot :229 - Lot-(4) Shop Stools
  • Lot :230 - 2-Door Supply Cabinet
  • Lot :231 - 2-Door Supply Cabinet in Ladies Room
  • Lot :232 - 6-Door Locker Unit in Men's Room
  • Lot :233 - Lot-V Belts Along (1) Wall (Located on Loft)
  • Lot :234 - Lot-(3) Carts and Fluorescent Light Bulbs
  • Lot :235 - Lot-(3) Carts with Drilling and Tapping Tooling Contents (Located on
  • Lot :236 - Lot-Fixtures on (4) Sections Shelving, (Shelving Not Included),
  • Lot :237 - Lot-(4) Sections Shelving and Disassembled Shelving, (Contents Not
  • Lot :238 - RUBBERMAID Wheel Barrow, (Located on Loft)
  • Lot :239 - 24-Drawer Bin Cabinet with Pumps, Motors and Light Fixtures
  • Lot :240 - Lot-Rubber Mats, Empty Bins, Hose and Pipe On Floor,
  • Lot :241 - Lot-Desk, (2) Chairs, Bookcase, Lateral File Cabinet, (2) Vertical
  • Lot :242 - 36" Portable Steel Bench, (Contents Not Included)
  • Lot :243 - FLASH FLOOD Emergency Eye Wash Station with Supply
  • Lot :244 - AMANO Model PIX-55 Digital Time Clock wth Rack
  • Lot :245 - VODAVI Phone System with Phones
Photo Gallery




































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

Aluminum Processing Industries, Inc.

Aucto.com

Aucto.com

Contact: Omer Hassan
Phone: 1-844-326-7339
Sale Location
840 Whitney Drive
Lapeer, MI 48446
Sale Dates and Times
Sale Terms and Conditions
ONLINE TIMED AUCTION- Aluminum Processing Industries, Inc. 840 Whitney Drive, Lapeer, Mi. 48446 Lots begin closing at 11:30 am, July 16, 2019 INSPECTION DATE: July 15, 2019, 8:30am-4:30pm at address listed above. Removal Dates: July 17, 18 & 19, 2019 from 8:30am-4:30pm. By appointment there after. Terms & Conditions for Aluminum Processing Industries Online Timed Auction are: -There is a 18% Buyers Premium applied to on-line bidders who purchase at this sale. -Please enter your Credit Card Information When You Register. CREDIT CARDS WILL NOT BE ACCEPTED FOR FINAL PAYMENT. -NOTICE: ALL BIDDERS AND OTHER PERSONS BIDDING AT THIS SALE AGREE THAT THEY HAVE READ AND HAVE FULL KNOWLEDGE OF THESE TERMS AND AGREE TO BE BOUND THEREOF! -IDENTIFICATION - All purchasers are required to give their full name, company name, permanent address (NO PO BOXES WILL BE APPROVED), phone number and signature. -TERMS: The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain to the fitness or use of the asset as being purchased. -CONDITION OF ARTICLES SOLD - The auctioneer shall not be held responsible for the correct description, genuineness, authenticity of or defect in any lot, and makes no warranty in connection therewith. No sale will be set aside or allowance made for any incorrectness, error in cataloging or any imperfection not noted. No allowances or deduction will be made on damaged articles. All goods are exposed for public exhibition and sold "AS-IS" "WHERE-IS" and without recourse.
Listing Details

Complete Liquidation of Aluminum Processing Equipment, Inc.

 

Register & Bid here: https://www.aucto.com/auction/aluminum-processing-industries-inc/10418

 

Featured Equipment Includes:

  • Lot :1 - 24-Drawer Bin Cabinet with Partial Bolt and Screw Contents
  • Lot :2 - 23-Drawer Bin Cabinet
  • Lot :3 - 24-Drawer Bin Cabinet with Bolt and Screw Contents
  • Lot :5 - 24-Drawer Bin Cabinet with Taper Shank Drill Contents
  • Lot :6 - 24-Drawer Bin Cabinet with Straight Shank and Taper Shank Drill
  • Lot :7 - 23-Drawer Bin Cabinet with Partial Drills and Bushings Contents
  • Lot :8 - 18-Drawer Bin Cabinet with Bushings Contents
  • Lot :9 - Lot-Go/Nogo Gauges with (6) Stands on (1) Shelf
  • Lot :10 - 24-Drawer Bin Cabinet with Partial Go/No Gauges and Setup Contents
  • Lot :11 - 18-Drawer Bin Cabinet with Drills, Reamers and Collets Contents
  • Lot :12 - 24-Drawer Bin Cabinet with Bushings, Pins and Drill Contents
  • Lot :13 - 24-Drawer Bin Cabinet with Bushings Contents
  • Lot :14 - STANLEY VIDMAR 7-Drawer Tooling Cabinet
  • Lot :15 - STANLEY VIDMAR Style 7-Drawer Tooling Cabinet
  • Lot :16 - STANLEY VIDMAR STYLE 5-Drawer Tooling Cabinet
  • Lot :17 - Lot-Hand Tools on (1) Table, Drill Wedges and Chuck Keys Not
  • Lot :18 - Lot-Chuck Wedges and Keys In (2) Boxes
  • Lot :19 - JUSTRITE Oily Waste Can Under (1) Table
  • Lot :20 - Lot-Plastic Tubing In (2) Boxes Under (1) Table
  • Lot :20A - CRAFTSMAN 3-Drawer Flip Top Toolbox Under (1) Table
  • Lot :21 - AIR KING 18" Shop Fan with Wall Mounting Bracket Under (1) Table
  • Lot :22 - Lot-Allen Wrenches in (1) Box
  • Lot :23 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :24 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :25 - Lot-Allen Wrench Sets in (1) Box
  • Lot :26 - Lot-Mechanic Wrenches in (2) Boxes
  • Lot :27 - Lot-Hand Stamps and Drill Punches in (1) Box
  • Lot :28 - CRAFTSMAN Model 973.114240 14.4-Volt 3/8" Cordless Drill
  • Lot :29 - Lot-Bearings and O-Rings in (2) Boxes
  • Lot :30 - WELDON Axial Relieving Fixture with Case
  • Lot :31 - HUSKY 6' Fiberglass Step Ladder
  • Lot :32 - HUSKY 12' Fiberglass Step Ladder
  • Lot :33 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :34 - Lot-(5) Large Tapered Shank Drills in (1) Box
  • Lot :35 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :36 - Lot-(7) Large Tapered Shank Drills in (1) Box
  • Lot :37 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :38 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :39 - Lot-Tapered Shank Drills in (1) Box
  • Lot :40 - Lot-Tapered Shank Drills in (1) Box
  • Lot :41 - Lot-Tapered Shank Drills in (1) Box
  • Lot :42 - Lot-Tapered Shank Drills in (1) Box
  • Lot :43 - Lot-Tapered Shank Drills in (1) Box
  • Lot :44 - Lot-Tapered Shank Drills in (1) Box
  • Lot :45 - Lot-Packaged Drills in (1) Box
  • Lot :46 - Lot-Packaged Drills in (1) Box
  • Lot :47 - Lot-Large Reamers in (1) Box
  • Lot :48 - Lot-(7) Large Straight Shank Drills in (1) Box
  • Lot :49 - Lot-(4) Large Straight Shank Drills in (1) Box
  • Lot :50 - Lot-Straight Shank Drills in (1) Box
  • Lot :51 - Lot-Straight Shank Drills in (1) Box
  • Lot :52 - Lot-Straight Shank Drills in (1) Box
  • Lot :53 - Lot-Production Drills in (1) Box
  • Lot :54 - Lot-Straight Shank Drills in (1) Box
  • Lot :55 - Lot-Straight Shank Drills in (1) Box
  • Lot :56 - Lot-Straight Shank Drills in (1) Box
  • Lot :57 - Lot-Straight Shank Drills in (1) Box
  • Lot :58 - Lot-Step Shank Drills in (1) Box
  • Lot :59 - Lot-Packaged Taps in (1) Box
  • Lot :60 - Lot-Taps in (1) Box
  • Lot :61 - Lot-Taps in (1) Box
  • Lot :62 - Lot-Taps in (1) Box
  • Lot :63 - Lot-Taps in (1) Box
  • Lot :64 - Lot-Taps in (1) Box
  • Lot :65 - Lot-Counterbores in (1) Box
  • Lot :66 - Lot-Reamers and Center Drills in (1) Box
  • Lot :68 - Lot-Gun Drills in (1) Box
  • Lot :69 - Lot-Gun Drills in (1) Box
  • Lot :70 - Lot-Gun Drills in (1) Box
  • Lot :71 - Lot-Gun Drills in (1) Box
  • Lot :72 - Lot-Gun Drills in (1) Box
  • Lot :73 - Lot-Drill Sleeves in (1) Box
  • Lot :74 - Lot-Drill Sleeves in (1) Box
  • Lot :75 - Lot-Drill Sleeves in (1) Box
  • Lot :76 - Lot-Drill Sleeves in (1) Box
  • Lot :77 - Lot-Drill Sleeves in (1) Box
  • Lot :78 - Lot-Drill Sleeves in (1) Box
  • Lot :79 - Lot-Drill Collets in (1) Box
  • Lot :80 - Lot-Drill Collets in (1) Box
  • Lot :81 - Lot-Drill Collets in (1) Box
  • Lot :82 - Lot- Spindles in (1) Box
  • Lot :83 - Lot-Spindles in (1) Box
  • Lot :84 - Lot-Quick Change Spindles in (1) Box
  • Lot :85 - Lot-Quick Change Spindles in (1) Box
  • Lot :86 - Lot-Spindles in (1) Box
  • Lot :87 - Lot-Swivel Spindles in (1) Box
  • Lot :88 - Lot-Swivel Spindles in (1) Box
  • Lot :89 - Lot-Swivel Spindles in (1) Box
  • Lot :90 - Lot-Swivel Spindles in (1) Box
  • Lot :91 - Lot-Spindles in (1) Box
  • Lot :92 - Lot-Quick Change Adaptors and Sleeves in (2) Boxes
  • Lot :93 - Lot-Spindles in (1) Box
  • Lot :94 - Lot-(4) Tap Holders in (1) Box
  • Lot :95 - Lot-Tool Holders in (1) Box
  • Lot :96 - Lot-Spindles in (1) Box
  • Lot :97 - Lot-(5) Tool Holders in (1) Box
  • Lot :98 - Lot-Spindle Arms in (1) Box
  • Lot :99 - Lot-Spindle Arms in (1) Box
  • Lot :100 - Lot-Spindle Arms in (1) Box
  • Lot :101 - Lot-(2) Jacobs No. 20N Drill Chucks and (1) Die Holder in (1) Box
  • Lot :102 - Lot-(3) Asst'd Drill Chucks in (1) Box
  • Lot :103 - Lot-(6) Asst'd Drill Chucks in (1) Box
  • Lot :104 - Lot-JACOBS Chuck Jaws, Sleeves and Arbors in (1) Box
  • Lot :105 - Lot-R8 Hlder with Boring Head, R8 Holder with Face Mill and 30-Taper
  • Lot :106 - Lot-(12) R8 Collets in (1) Box
  • Lot :107 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :108 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :109 - ETTCO Tapping Head
  • Lot :110 - ETTCO Model 2B Tapping Head, S/N B-14219
  • Lot :111 - Lot-Hold Down Tooling in (6) Boxes with Stand
  • Lot :112 - Lot-Bushings, Sleeves and Asst'd Hardware in (11) Boxes
  • Lot :113 - 24-Drawer Bin Cabinet with Change Gears Contents, (Shelving Not
  • Lot :114 - Lot-Fixture Plates on (1) Section Shelving, (Shelving Not Included)
  • Lot :115 - Lot-(2) Sections Shelving 58"H X 38"W X 18"D, (Contents Not
  • Lot :116 - BRIDGEPORT 6" Machine Vise
  • Lot :117 - 6" Machine Vise
  • Lot :118 - WILTON 6" Machine Vise
  • Lot :119 - SPEED VISE 6" Machine Vise
  • Lot :120 - SPEED VISE 6" Machine Vise
  • Lot :121 - SPEED VISE 6" Machine Vise
  • Lot :122 - SPEED VISE 6" Machine Vise
  • Lot :123 - 58"L X 29 1/2"W Portable Steel Cart with 5" Bench Vise, (Machine
  • Lot :124 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :125 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :126 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :127 - Lot-(6) Lead Screws in (1) Box
  • Lot :128 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :129 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :130 - Foot-Operated Hydraulic Lift Cart, 18" x 28" Platform
  • Lot :131 - 4-Wheel Drum Cart
  • Lot :132 - Lot-(2) Drum Dollies
  • Lot :133 - RIDGID 5-HP 16-Gallon Shop Vac with Attachments
  • Lot :134 - Hand Pump Operated Grease Pump with Grease
  • Lot :134A - HUSKY 1550-PSI Electric Cold Water Portable Pressure Washer
  • Lot :135 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :136 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :137 - 24" Wide by 48"H, Portable Stairs
  • Lot :138 - Shop Desk
  • Lot :139 - CLAUSING 900-1,800 RPM 20" Model 22V-1, 4-Head Production Drill
  • Lot :140 - ROCKWELL DELTA 20" 2-Head Production Drill Table, (2) Drill Press
  • Lot :141 - CHAS G. ALLEN 24" Single Spindle Lead Screw Tapping Machine
  • Lot :142 - ROCKWELL Model 71-600, 17" Floor Standing Production Drill;
  • Lot :143 - MILMAN MODEL T-300, 24" Floor Type Production Drill, S/n 30077,
  • Lot :145 - GOVRO NELSON MODEL 300, 18" Floor Type Drill Press,
  • Lot :146 - DELTA ROCKWELL MODEL 17-600, 17" Floor Type Drill Press,
  • Lot :147 - BRIDGEPORT 1 1/2-HP Variable Speed Vertical Milling Machine,
  • Lot :149 - PRO-CUT MODEL FR8OUC180AJ, 7" Horizontal Metal Cutting Band
  • Lot :150 - GOVRO NELSON (4) Head Drilling & Tapping Machine, Consisting of
  • Lot :151 - GOVRO NELSON 3-Head Horizontal Drilling and Tapping Machine,
  • Lot :152 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :153 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :154 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :155 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :156 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :157 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :158 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :159 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :160 - Onsrud Model MM-48, 48" 5-Station Rotary Surface Index Milling
  • Lot :161 - ELDORADO MODEL M751036, Horizontal Precision Deep Hole Gun Drilling
  • Lot :162 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-463,
  • Lot :163 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-431,
  • Lot :164 - Speedfam Thru Feed Grinder, S/n 625-TFG-275, Magnet Hold,
  • Lot :165 - Speedfam Thru Feed Grinder, S/n 625-TFG-228, Magnet Hold,
  • Lot :166 - CYCLOTRON Grinding Sludge Filtration System, S/n 1378
  • Lot :167 - POWER PACK Model 4-DL-6, 50"L X 6"W Motorized Nylon Belt
  • Lot :168 - VERSA FERGUSON 72"L X 6"W Motorized Nylon Belt Conveyor,
  • Lot :169 - Lot-Fixtures on (4) Sections, (Face Side Only), (Shelving Not Included)
  • Lot :170 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :171 - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :172 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :172A - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :173 - Lot-(12) Cartridge Plates in (2) Stacks on (1) Shelf
  • Lot :174 - Lot-Lead Screws on (1) Shelf
  • Lot :175 - Lot-Lead Screws on (1) Shelf
  • Lot :176 - Lot-Lead Screws on (1) Shelf
  • Lot :177 - Lot-Lead Screws on (1) Shelf
  • Lot :178 - Lot-(18) Bins with Misc. Hardware Contents on (3) Shelves,
  • Lot :179 - Lot-(13) Empty Bins on (3) Shelves
  • Lot :180 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :181 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :182 - Lot-(7) Cartridge Plates on (1) Shelf
  • Lot :183 - Lot-(12) Cartridge Plates on (1) Shelf
  • Lot :184 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :185 - Lot-(13) Cartridge Plates on (1) Shelf
  • Lot :186 - 2-Door Supply Cabinet with Misc. Machine Parts
  • Lot :187 - 2-Door Supply Cabinet with Misc. Machine Attachment Contents
  • Lot :188 - Lot-Fixtures with (2) Sections Shelving
  • Lot :189 - 2-Door Supply Cabinet with Electrical Contents Including
  • Lot :190 - SULLAIR Model LS-10-25H AC, 25-HP Rotary Screw Packaged
  • Lot :191 - SULLAIR Model SRD-125 AC, Refrigerated Compressed Air Dryer,
  • Lot :192 - NISSAN Model KCFH02A25V 4,700-LB Capacity x 187" Lift Capacity,
  • Lot :193 - HYPNEUMAT Model LS300E Lead Screw Tap Unit on (1) Pallet on
  • Lot :194 - Lot-(7) Wire Baskets with Carts
  • Lot :195 - Lot-(4) Wire Baskets with Carts
  • Lot :196 - Lot-(10) Wire Baskets on (1) Top Shelf
  • Lot :197 - Lot-(6) Wire Baskets with (1) Cart Under (1) Section Pallet Rack
  • Lot :198 - Lot-(4) Wire Baskets with Carts Under (1) Section Pallet Rack
  • Lot :199 - Lot-(9) Wire Baskets on (1) Top Shelf
  • Lot :200 - Lot-(12) Wire Baskets on (1) Top Shelf
  • Lot :201 - Lot-Empty Plastic Totes and Steel Parts Bins on (1) Shelf
  • Lot :202 - Lot-(2) Sections of Pallet Rack 144"H X 108"W X 36"D, (Contents Not
  • Lot :203 - Lot-(2) Sections of Pallet Rack 120"H X 96"W X 42"D, (Contents Not
  • Lot :204 - 75"H X 60"W X 36"D Barrel Rack
  • Lot :205 - Welding Curtain
  • Lot :206 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D
  • Lot :207 - Lot-(2) Sections of Shelving 75"H X 36"W X 18"D
  • Lot :208 - Lot-(8) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :209 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :210 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :211 - Lot-(2) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :212 - BENDIX CORDAX Model 1000, Coordinate Measuring Machine,
  • Lot :213 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :214 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :215 - Lot-STARRETT 18" Vernier Height Gage with STARRETT 10"
  • Lot :216 - 14"L X 10"W Steel Surface Plate
  • Lot :217 - 9"L X 8"W X 6"H Riser Cube
  • Lot :218 - FEDERAL Dial Indcator with Parts in (1) Box
  • Lot :219 - Lot- Angle, Honeycomb Blocks and Indicator Stands in (1) Box
  • Lot :220 - Hold Down Set with Stand
  • Lot :221 - Lot-Asst'd Inspection in (1) Box
  • Lot :222 - Go/No Go Gages in (1) Box
  • Lot :223 - Refractometer with Simpson Model 372, OHM Meter
  • Lot :224 - Lot-(2) FEDERAL Digital Indicators with Base and (1) FEDERAL
  • Lot :225 - 10-Drawer Bin Cabinet with Pin and Block Gages
  • Lot :226 - STARRETT 36"L X 24"W X 6"D 2-Ledge Granite Surface Plate
  • Lot :227 - GE Refrigerator with Microwave
  • Lot :228 - Lot-Round Table with (4) Chairs
  • Lot :229 - Lot-(4) Shop Stools
  • Lot :230 - 2-Door Supply Cabinet
  • Lot :231 - 2-Door Supply Cabinet in Ladies Room
  • Lot :232 - 6-Door Locker Unit in Men's Room
  • Lot :233 - Lot-V Belts Along (1) Wall (Located on Loft)
  • Lot :234 - Lot-(3) Carts and Fluorescent Light Bulbs
  • Lot :235 - Lot-(3) Carts with Drilling and Tapping Tooling Contents (Located on
  • Lot :236 - Lot-Fixtures on (4) Sections Shelving, (Shelving Not Included),
  • Lot :237 - Lot-(4) Sections Shelving and Disassembled Shelving, (Contents Not
  • Lot :238 - RUBBERMAID Wheel Barrow, (Located on Loft)
  • Lot :239 - 24-Drawer Bin Cabinet with Pumps, Motors and Light Fixtures
  • Lot :240 - Lot-Rubber Mats, Empty Bins, Hose and Pipe On Floor,
  • Lot :241 - Lot-Desk, (2) Chairs, Bookcase, Lateral File Cabinet, (2) Vertical
  • Lot :242 - 36" Portable Steel Bench, (Contents Not Included)
  • Lot :243 - FLASH FLOOD Emergency Eye Wash Station with Supply
  • Lot :244 - AMANO Model PIX-55 Digital Time Clock wth Rack
  • Lot :245 - VODAVI Phone System with Phones
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Aluminum Processing Industries, Inc.
 Online Only Auction
Sale Date(s)
Bidding Starts: Monday Jun 24 , 9:00 AM
Bidding Ends: Tuesday Jul 16 , 11:30 PM
Sale Location

Lapeer, MI 48446
Listing Terms and Conditions
ONLINE TIMED AUCTION- Aluminum Processing Industries, Inc. 840 Whitney Drive, Lapeer, Mi. 48446 Lots begin closing at 11:30 am, July 16, 2019 INSPECTION DATE: July 15, 2019, 8:30am-4:30pm at address listed above. Removal Dates: July 17, 18 & 19, 2019 from 8:30am-4:30pm. By appointment there after. Terms & Conditions for Aluminum Processing Industries Online Timed Auction are: -There is a 18% Buyers Premium applied to on-line bidders who purchase at this sale. -Please enter your Credit Card Information When You Register. CREDIT CARDS WILL NOT BE ACCEPTED FOR FINAL PAYMENT. -NOTICE: ALL BIDDERS AND OTHER PERSONS BIDDING AT THIS SALE AGREE THAT THEY HAVE READ AND HAVE FULL KNOWLEDGE OF THESE TERMS AND AGREE TO BE BOUND THEREOF! -IDENTIFICATION - All purchasers are required to give their full name, company name, permanent address (NO PO BOXES WILL BE APPROVED), phone number and signature. -TERMS: The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain to the fitness or use of the asset as being purchased. -CONDITION OF ARTICLES SOLD - The auctioneer shall not be held responsible for the correct description, genuineness, authenticity of or defect in any lot, and makes no warranty in connection therewith. No sale will be set aside or allowance made for any incorrectness, error in cataloging or any imperfection not noted. No allowances or deduction will be made on damaged articles. All goods are exposed for public exhibition and sold "AS-IS" "WHERE-IS" and without recourse.

Complete Liquidation of Aluminum Processing Equipment, Inc.

 

Register & Bid here: https://www.aucto.com/auction/aluminum-processing-industries-inc/10418

 

Featured Equipment Includes:

  • Lot :1 - 24-Drawer Bin Cabinet with Partial Bolt and Screw Contents
  • Lot :2 - 23-Drawer Bin Cabinet
  • Lot :3 - 24-Drawer Bin Cabinet with Bolt and Screw Contents
  • Lot :5 - 24-Drawer Bin Cabinet with Taper Shank Drill Contents
  • Lot :6 - 24-Drawer Bin Cabinet with Straight Shank and Taper Shank Drill
  • Lot :7 - 23-Drawer Bin Cabinet with Partial Drills and Bushings Contents
  • Lot :8 - 18-Drawer Bin Cabinet with Bushings Contents
  • Lot :9 - Lot-Go/Nogo Gauges with (6) Stands on (1) Shelf
  • Lot :10 - 24-Drawer Bin Cabinet with Partial Go/No Gauges and Setup Contents
  • Lot :11 - 18-Drawer Bin Cabinet with Drills, Reamers and Collets Contents
  • Lot :12 - 24-Drawer Bin Cabinet with Bushings, Pins and Drill Contents
  • Lot :13 - 24-Drawer Bin Cabinet with Bushings Contents
  • Lot :14 - STANLEY VIDMAR 7-Drawer Tooling Cabinet
  • Lot :15 - STANLEY VIDMAR Style 7-Drawer Tooling Cabinet
  • Lot :16 - STANLEY VIDMAR STYLE 5-Drawer Tooling Cabinet
  • Lot :17 - Lot-Hand Tools on (1) Table, Drill Wedges and Chuck Keys Not
  • Lot :18 - Lot-Chuck Wedges and Keys In (2) Boxes
  • Lot :19 - JUSTRITE Oily Waste Can Under (1) Table
  • Lot :20 - Lot-Plastic Tubing In (2) Boxes Under (1) Table
  • Lot :20A - CRAFTSMAN 3-Drawer Flip Top Toolbox Under (1) Table
  • Lot :21 - AIR KING 18" Shop Fan with Wall Mounting Bracket Under (1) Table
  • Lot :22 - Lot-Allen Wrenches in (1) Box
  • Lot :23 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :24 - Lot-T-Handle Allen Wrenches in (1) Box
  • Lot :25 - Lot-Allen Wrench Sets in (1) Box
  • Lot :26 - Lot-Mechanic Wrenches in (2) Boxes
  • Lot :27 - Lot-Hand Stamps and Drill Punches in (1) Box
  • Lot :28 - CRAFTSMAN Model 973.114240 14.4-Volt 3/8" Cordless Drill
  • Lot :29 - Lot-Bearings and O-Rings in (2) Boxes
  • Lot :30 - WELDON Axial Relieving Fixture with Case
  • Lot :31 - HUSKY 6' Fiberglass Step Ladder
  • Lot :32 - HUSKY 12' Fiberglass Step Ladder
  • Lot :33 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :34 - Lot-(5) Large Tapered Shank Drills in (1) Box
  • Lot :35 - Lot-(2) Large Tapered Shank Drills in (1) Box
  • Lot :36 - Lot-(7) Large Tapered Shank Drills in (1) Box
  • Lot :37 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :38 - Lot-(8) Large Tapered Shank Drills in (1) Box
  • Lot :39 - Lot-Tapered Shank Drills in (1) Box
  • Lot :40 - Lot-Tapered Shank Drills in (1) Box
  • Lot :41 - Lot-Tapered Shank Drills in (1) Box
  • Lot :42 - Lot-Tapered Shank Drills in (1) Box
  • Lot :43 - Lot-Tapered Shank Drills in (1) Box
  • Lot :44 - Lot-Tapered Shank Drills in (1) Box
  • Lot :45 - Lot-Packaged Drills in (1) Box
  • Lot :46 - Lot-Packaged Drills in (1) Box
  • Lot :47 - Lot-Large Reamers in (1) Box
  • Lot :48 - Lot-(7) Large Straight Shank Drills in (1) Box
  • Lot :49 - Lot-(4) Large Straight Shank Drills in (1) Box
  • Lot :50 - Lot-Straight Shank Drills in (1) Box
  • Lot :51 - Lot-Straight Shank Drills in (1) Box
  • Lot :52 - Lot-Straight Shank Drills in (1) Box
  • Lot :53 - Lot-Production Drills in (1) Box
  • Lot :54 - Lot-Straight Shank Drills in (1) Box
  • Lot :55 - Lot-Straight Shank Drills in (1) Box
  • Lot :56 - Lot-Straight Shank Drills in (1) Box
  • Lot :57 - Lot-Straight Shank Drills in (1) Box
  • Lot :58 - Lot-Step Shank Drills in (1) Box
  • Lot :59 - Lot-Packaged Taps in (1) Box
  • Lot :60 - Lot-Taps in (1) Box
  • Lot :61 - Lot-Taps in (1) Box
  • Lot :62 - Lot-Taps in (1) Box
  • Lot :63 - Lot-Taps in (1) Box
  • Lot :64 - Lot-Taps in (1) Box
  • Lot :65 - Lot-Counterbores in (1) Box
  • Lot :66 - Lot-Reamers and Center Drills in (1) Box
  • Lot :68 - Lot-Gun Drills in (1) Box
  • Lot :69 - Lot-Gun Drills in (1) Box
  • Lot :70 - Lot-Gun Drills in (1) Box
  • Lot :71 - Lot-Gun Drills in (1) Box
  • Lot :72 - Lot-Gun Drills in (1) Box
  • Lot :73 - Lot-Drill Sleeves in (1) Box
  • Lot :74 - Lot-Drill Sleeves in (1) Box
  • Lot :75 - Lot-Drill Sleeves in (1) Box
  • Lot :76 - Lot-Drill Sleeves in (1) Box
  • Lot :77 - Lot-Drill Sleeves in (1) Box
  • Lot :78 - Lot-Drill Sleeves in (1) Box
  • Lot :79 - Lot-Drill Collets in (1) Box
  • Lot :80 - Lot-Drill Collets in (1) Box
  • Lot :81 - Lot-Drill Collets in (1) Box
  • Lot :82 - Lot- Spindles in (1) Box
  • Lot :83 - Lot-Spindles in (1) Box
  • Lot :84 - Lot-Quick Change Spindles in (1) Box
  • Lot :85 - Lot-Quick Change Spindles in (1) Box
  • Lot :86 - Lot-Spindles in (1) Box
  • Lot :87 - Lot-Swivel Spindles in (1) Box
  • Lot :88 - Lot-Swivel Spindles in (1) Box
  • Lot :89 - Lot-Swivel Spindles in (1) Box
  • Lot :90 - Lot-Swivel Spindles in (1) Box
  • Lot :91 - Lot-Spindles in (1) Box
  • Lot :92 - Lot-Quick Change Adaptors and Sleeves in (2) Boxes
  • Lot :93 - Lot-Spindles in (1) Box
  • Lot :94 - Lot-(4) Tap Holders in (1) Box
  • Lot :95 - Lot-Tool Holders in (1) Box
  • Lot :96 - Lot-Spindles in (1) Box
  • Lot :97 - Lot-(5) Tool Holders in (1) Box
  • Lot :98 - Lot-Spindle Arms in (1) Box
  • Lot :99 - Lot-Spindle Arms in (1) Box
  • Lot :100 - Lot-Spindle Arms in (1) Box
  • Lot :101 - Lot-(2) Jacobs No. 20N Drill Chucks and (1) Die Holder in (1) Box
  • Lot :102 - Lot-(3) Asst'd Drill Chucks in (1) Box
  • Lot :103 - Lot-(6) Asst'd Drill Chucks in (1) Box
  • Lot :104 - Lot-JACOBS Chuck Jaws, Sleeves and Arbors in (1) Box
  • Lot :105 - Lot-R8 Hlder with Boring Head, R8 Holder with Face Mill and 30-Taper
  • Lot :106 - Lot-(12) R8 Collets in (1) Box
  • Lot :107 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :108 - PROCUNIER Model F Size 4 Tapping Head
  • Lot :109 - ETTCO Tapping Head
  • Lot :110 - ETTCO Model 2B Tapping Head, S/N B-14219
  • Lot :111 - Lot-Hold Down Tooling in (6) Boxes with Stand
  • Lot :112 - Lot-Bushings, Sleeves and Asst'd Hardware in (11) Boxes
  • Lot :113 - 24-Drawer Bin Cabinet with Change Gears Contents, (Shelving Not
  • Lot :114 - Lot-Fixture Plates on (1) Section Shelving, (Shelving Not Included)
  • Lot :115 - Lot-(2) Sections Shelving 58"H X 38"W X 18"D, (Contents Not
  • Lot :116 - BRIDGEPORT 6" Machine Vise
  • Lot :117 - 6" Machine Vise
  • Lot :118 - WILTON 6" Machine Vise
  • Lot :119 - SPEED VISE 6" Machine Vise
  • Lot :120 - SPEED VISE 6" Machine Vise
  • Lot :121 - SPEED VISE 6" Machine Vise
  • Lot :122 - SPEED VISE 6" Machine Vise
  • Lot :123 - 58"L X 29 1/2"W Portable Steel Cart with 5" Bench Vise, (Machine
  • Lot :124 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :125 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :126 - Lot-(4) Lead Screws with Tap Holders in (1) Box
  • Lot :127 - Lot-(6) Lead Screws in (1) Box
  • Lot :128 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :129 - U.S. GENERAL 580-LB Capacity 5-Drawer Flip Top Rolling Toolbox
  • Lot :130 - Foot-Operated Hydraulic Lift Cart, 18" x 28" Platform
  • Lot :131 - 4-Wheel Drum Cart
  • Lot :132 - Lot-(2) Drum Dollies
  • Lot :133 - RIDGID 5-HP 16-Gallon Shop Vac with Attachments
  • Lot :134 - Hand Pump Operated Grease Pump with Grease
  • Lot :134A - HUSKY 1550-PSI Electric Cold Water Portable Pressure Washer
  • Lot :135 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :136 - Lot-(4) 4-Wheel Portable Shop Carts
  • Lot :137 - 24" Wide by 48"H, Portable Stairs
  • Lot :138 - Shop Desk
  • Lot :139 - CLAUSING 900-1,800 RPM 20" Model 22V-1, 4-Head Production Drill
  • Lot :140 - ROCKWELL DELTA 20" 2-Head Production Drill Table, (2) Drill Press
  • Lot :141 - CHAS G. ALLEN 24" Single Spindle Lead Screw Tapping Machine
  • Lot :142 - ROCKWELL Model 71-600, 17" Floor Standing Production Drill;
  • Lot :143 - MILMAN MODEL T-300, 24" Floor Type Production Drill, S/n 30077,
  • Lot :145 - GOVRO NELSON MODEL 300, 18" Floor Type Drill Press,
  • Lot :146 - DELTA ROCKWELL MODEL 17-600, 17" Floor Type Drill Press,
  • Lot :147 - BRIDGEPORT 1 1/2-HP Variable Speed Vertical Milling Machine,
  • Lot :149 - PRO-CUT MODEL FR8OUC180AJ, 7" Horizontal Metal Cutting Band
  • Lot :150 - GOVRO NELSON (4) Head Drilling & Tapping Machine, Consisting of
  • Lot :151 - GOVRO NELSON 3-Head Horizontal Drilling and Tapping Machine,
  • Lot :152 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :153 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :154 - GOVRO NELSON 2-Head Drilling and Tapping Machine, Consisting
  • Lot :155 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :156 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :157 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :158 - GOVRO NELSON 3-Head Drilling and Tapping Machine, Consisting
  • Lot :159 - 4-Head Drilling and Tapping Machine, Consisting of (3) Horizontal and
  • Lot :160 - Onsrud Model MM-48, 48" 5-Station Rotary Surface Index Milling
  • Lot :161 - ELDORADO MODEL M751036, Horizontal Precision Deep Hole Gun Drilling
  • Lot :162 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-463,
  • Lot :163 - W.H. Nichols Horizontal Twin Opposed Milling Machine, S/n TM-431,
  • Lot :164 - Speedfam Thru Feed Grinder, S/n 625-TFG-275, Magnet Hold,
  • Lot :165 - Speedfam Thru Feed Grinder, S/n 625-TFG-228, Magnet Hold,
  • Lot :166 - CYCLOTRON Grinding Sludge Filtration System, S/n 1378
  • Lot :167 - POWER PACK Model 4-DL-6, 50"L X 6"W Motorized Nylon Belt
  • Lot :168 - VERSA FERGUSON 72"L X 6"W Motorized Nylon Belt Conveyor,
  • Lot :169 - Lot-Fixtures on (4) Sections, (Face Side Only), (Shelving Not Included)
  • Lot :170 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :171 - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :172 - Lot-Cartridge Plates with Spindles on (5) Shelves in (1) Section,
  • Lot :172A - Lot-Cartridge Plates with Spindles on (4) Shelves in (1) Section,
  • Lot :173 - Lot-(12) Cartridge Plates in (2) Stacks on (1) Shelf
  • Lot :174 - Lot-Lead Screws on (1) Shelf
  • Lot :175 - Lot-Lead Screws on (1) Shelf
  • Lot :176 - Lot-Lead Screws on (1) Shelf
  • Lot :177 - Lot-Lead Screws on (1) Shelf
  • Lot :178 - Lot-(18) Bins with Misc. Hardware Contents on (3) Shelves,
  • Lot :179 - Lot-(13) Empty Bins on (3) Shelves
  • Lot :180 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :181 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :182 - Lot-(7) Cartridge Plates on (1) Shelf
  • Lot :183 - Lot-(12) Cartridge Plates on (1) Shelf
  • Lot :184 - Lot-(14) Cartridge Plates on (1) Shelf
  • Lot :185 - Lot-(13) Cartridge Plates on (1) Shelf
  • Lot :186 - 2-Door Supply Cabinet with Misc. Machine Parts
  • Lot :187 - 2-Door Supply Cabinet with Misc. Machine Attachment Contents
  • Lot :188 - Lot-Fixtures with (2) Sections Shelving
  • Lot :189 - 2-Door Supply Cabinet with Electrical Contents Including
  • Lot :190 - SULLAIR Model LS-10-25H AC, 25-HP Rotary Screw Packaged
  • Lot :191 - SULLAIR Model SRD-125 AC, Refrigerated Compressed Air Dryer,
  • Lot :192 - NISSAN Model KCFH02A25V 4,700-LB Capacity x 187" Lift Capacity,
  • Lot :193 - HYPNEUMAT Model LS300E Lead Screw Tap Unit on (1) Pallet on
  • Lot :194 - Lot-(7) Wire Baskets with Carts
  • Lot :195 - Lot-(4) Wire Baskets with Carts
  • Lot :196 - Lot-(10) Wire Baskets on (1) Top Shelf
  • Lot :197 - Lot-(6) Wire Baskets with (1) Cart Under (1) Section Pallet Rack
  • Lot :198 - Lot-(4) Wire Baskets with Carts Under (1) Section Pallet Rack
  • Lot :199 - Lot-(9) Wire Baskets on (1) Top Shelf
  • Lot :200 - Lot-(12) Wire Baskets on (1) Top Shelf
  • Lot :201 - Lot-Empty Plastic Totes and Steel Parts Bins on (1) Shelf
  • Lot :202 - Lot-(2) Sections of Pallet Rack 144"H X 108"W X 36"D, (Contents Not
  • Lot :203 - Lot-(2) Sections of Pallet Rack 120"H X 96"W X 42"D, (Contents Not
  • Lot :204 - 75"H X 60"W X 36"D Barrel Rack
  • Lot :205 - Welding Curtain
  • Lot :206 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D
  • Lot :207 - Lot-(2) Sections of Shelving 75"H X 36"W X 18"D
  • Lot :208 - Lot-(8) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :209 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :210 - Lot-(3) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :211 - Lot-(2) Sections of Shelving 84"H X 36"W X 18"D, (Contents Not
  • Lot :212 - BENDIX CORDAX Model 1000, Coordinate Measuring Machine,
  • Lot :213 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :214 - BENDIX 4-Axis Digital Positioning Readout
  • Lot :215 - Lot-STARRETT 18" Vernier Height Gage with STARRETT 10"
  • Lot :216 - 14"L X 10"W Steel Surface Plate
  • Lot :217 - 9"L X 8"W X 6"H Riser Cube
  • Lot :218 - FEDERAL Dial Indcator with Parts in (1) Box
  • Lot :219 - Lot- Angle, Honeycomb Blocks and Indicator Stands in (1) Box
  • Lot :220 - Hold Down Set with Stand
  • Lot :221 - Lot-Asst'd Inspection in (1) Box
  • Lot :222 - Go/No Go Gages in (1) Box
  • Lot :223 - Refractometer with Simpson Model 372, OHM Meter
  • Lot :224 - Lot-(2) FEDERAL Digital Indicators with Base and (1) FEDERAL
  • Lot :225 - 10-Drawer Bin Cabinet with Pin and Block Gages
  • Lot :226 - STARRETT 36"L X 24"W X 6"D 2-Ledge Granite Surface Plate
  • Lot :227 - GE Refrigerator with Microwave
  • Lot :228 - Lot-Round Table with (4) Chairs
  • Lot :229 - Lot-(4) Shop Stools
  • Lot :230 - 2-Door Supply Cabinet
  • Lot :231 - 2-Door Supply Cabinet in Ladies Room
  • Lot :232 - 6-Door Locker Unit in Men's Room
  • Lot :233 - Lot-V Belts Along (1) Wall (Located on Loft)
  • Lot :234 - Lot-(3) Carts and Fluorescent Light Bulbs
  • Lot :235 - Lot-(3) Carts with Drilling and Tapping Tooling Contents (Located on
  • Lot :236 - Lot-Fixtures on (4) Sections Shelving, (Shelving Not Included),
  • Lot :237 - Lot-(4) Sections Shelving and Disassembled Shelving, (Contents Not
  • Lot :238 - RUBBERMAID Wheel Barrow, (Located on Loft)
  • Lot :239 - 24-Drawer Bin Cabinet with Pumps, Motors and Light Fixtures
  • Lot :240 - Lot-Rubber Mats, Empty Bins, Hose and Pipe On Floor,
  • Lot :241 - Lot-Desk, (2) Chairs, Bookcase, Lateral File Cabinet, (2) Vertical
  • Lot :242 - 36" Portable Steel Bench, (Contents Not Included)
  • Lot :243 - FLASH FLOOD Emergency Eye Wash Station with Supply
  • Lot :244 - AMANO Model PIX-55 Digital Time Clock wth Rack
  • Lot :245 - VODAVI Phone System with Phones