Driscoll & Driscoll Inc. Farm Retirement Auction
Listing ID#: 288138

Sale Location

East Grand Forks, MN 56721
Sale Dates and TimesSALE IS COMPLETED
Thursday Mar 19, 2020 Completed
Thursday Mar 26, 2020 Completed
Sale Type
   Live with Online Auction  VIEW ONLINE CATALOG
Company Information
Steffes Group

Contact: Chris Richard
Phone: 319-385-2000
Email: chris.richard@steffesgroup.com
Website: www.steffesgroup.com

EstateSale.com ID#: 8777
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

  • A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
  • A 2% buyer’s premium with a maximum charge of $500 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

  • Bank Wire Transfer; please call for wire instructions to be emailed to you.
  • Check delivered to our office that held the auction
  • Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

  • Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

All appropriate state sales tax laws will apply per the location and type of seller of the piece of equipment.

Please note that Minnesota does not consider regularly-scheduled consignment auctions as "auctions" but rather "consignment auctions," requiring sales tax to be charged unless the buyer provides an exemption form for qualifying items.

For purchases in South Dakota you are not exempt from any sales tax unless a 3rd party transports your items and you take possession outside of the State of South Dakota. In that case, the state laws where you take possession are effective. There are exceptions for dealers (retailers).

Click on the following for a tax exempt form: Minnesota Tax Link    North Dakota Tax Link    Iowa Tax Link 

ND Dakota titled vehicles

Per North Dakota vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged by the State of North Dakota on the entire sales price (including buyer’s premium) for any vehicle registered in North Dakota. 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

  • You complete an exemption certificate with a ND sales tax permit number
  • The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. 
All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

  • Removing and disposing as the Company sees fit.
  • Allowing seller to retain or scrap.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

  • The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.



Listing Information

FARM RETIREMENT AUCTION

 

LOCATION: On Hwy. 2 East near mile marker 6, on the east edge of East Grand Forks, MN.  (18854 417th Ave SW, East Grand Forks, MN 56721)

 

AUCTIONEER'S NOTE:  Major equipment begins selling at 11:00 AM. Live online bidding available on major equipment. 

 

Items highlighted in yellow are additions or changes from the original posting!

 

4WD TRACTORS

2008 Case-IH 535, 50th Steiger Anniversary Special, luxury cab, leather, powershift, 5 hyd., return flow, decelerator, Pro 700 monitor, integrated auto steer, RTK unlock, full wheel weight pkg., HID lights, cold start option, electric mirrors, ground spd. radar, 800/70R38 duals, 4,720 hrs., New duals Fall 2019, S/NZ7F108007

1996 Case-IH 9380, N14 Cummins, 12 spd. powershift, 4 hyd., Trimble EZ-Pilot, no receiver or display, front weights, (34) rear weights, 520/85R42 triples, 9,236 hrs., New engine at 7,073 hrs., S/NJEE0037952

 

MFWD TRACTORS

2007 Case-IH Magnum 245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, integrated auto steer, no receiver or display, (10) front weights, 380/85R34 front duals, 380/90R50 duals, 4,203 hrs., S/NZ6RZ01970

2006 Case-IH MX245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 triples, 5,782 hrs., S/NZ6RZ01589

2005 Case-IH MX230, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 duals, 6,055 hrs., S/NJAZ134487

1995 Case-IH 7250, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no display or receiver, (22) front weights, 380/85R30 front tires, 380/85R46 duals, shows 369.4 hrs., S/NJJA005855

1989 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, auto steer, no receiver or display, (5) front weights, 14.9-28 front tires, 320/90R46 duals, 3,267 hrs., S/NJJA0014922

1988 Case-IH 7130, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no receiver or display, (18) front weights, 14.9-28 front tires, 14.9-46 duals, 5,183 hrs., S/NJJA0005593

IHC 1486, CAH, TA, 8 spd., 3 hyd., 3 pt., 540/1000 PTO, 16.9-28 front tires, 520/85R42 rear tires, no duals  

 

2WD TRACTORS & LOADER

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 14.9-46 rear band duals, shows 1,693 hrs., S/NJJA0005673

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 320/90R46 rear band duals, shows 4,419 hrs., S/NJJA0007053

IHC 1066, CAH, factory cab, hydro, 3 hyd., 3 pt., 540/1000 PTO, IHC 2350 Mount-O-Matic loader, quick mount, 8' bucket, 10:00-15 front tires, 18.4-38 rear tires, shows 548 hrs., tag missing

 

GPS EQUIPMENT

(4) Trimble FM-1000 displays, RTK unlock, radio included, S/N39916663, S/N5311594729, S/N31799397, S/N33816699

(2) Trimble FM-750 displays, RTK, Water Management & sprayer boom control unlocks, radio included, S/N32968417

(6) Trimble AG25 receivers

 

HARVEST EQUIPMENT

2011 Case-IH 8120, axial flow, RWD, AFX, HD planetary w/diff lock, axle ext., high cap. lift cyl., rock trap, platform ext., Range Point auto steer, Nav II controller, 262 receiver, Pro 600 monitor, Y&M, radio, power adj. mirrors, HD variable header drive, small & large wire concaves, large grates, self-leveling shoe, adj. sieves, 2 spd. elevator, manual fold hopper ext., fine cut chopper, HID lighting, rear hitch, 520/85R42 front duals, 28L-26 rear tires, 1,108 sep. hrs., 1,551 engine hrs., S/NYBG211089

2011 Case-IH 2162 flex draper head, 40', single sickle drive, fore/aft, lights, slow spd. transport, Case-IH hookups, S/NYBZN14515

Universal UH14 edible bean head, 14', IHC hookups, S/N7501451

Sund pickup head, 14'

SSR Pump single axle header trailer, 30', flex bar

 

GRAIN CART

2012 J&M 875 grain cart, 875 bu., scale, roll tarp, 1000 PTO, 30.5-32 tires

 

PLANTERS

2006 John Deere DB44 MaxEmerge XP sugarbeet planter, 24x22", 1.6 bu. hoppers, insecticide, variable rate hyd. drive, Dawn screw adj. residue managers, markers, down pressure springs, liquid fertilizer, 500 gal. poly tank, ground drive pump, wind guards, erosion control shanks, sugarbeet & edible bean plates, S/NPADB44X710142

John Deere MaxEmerge vacuum planter, 18x22", 2 pt. w/lift assist, 1.6 bu. hoppers w/extension, down pressure springs, ground drive, hyd. folding bar, 200 monitor, markers, sugarbeet plates

 

AIR SEEDER

2006 Fargo Aire 4060 air seeder, double disc openers, 45', 6-3/4" spacing, Fargo Aire 2800 air cart, twin compartment, ground drive, never had fertilizer in it, seeder S/N502065, cart S/N505094

 

TILLAGE EQUIPMENT

Salford 570 RTS vertical tillage tool, 36', crumbler, weight pkg., 8-wave blades, 12.5L-15 tires, 3-bar harrow, new discs in 2018, S/NF02948

DMI Tiger-Mate II field cultivator, 60', 5-section, 6" knock-on shovels, hyd. rear hitch, walking tandems, toolbox, 11L-15 tires, 3-bar harrow

Wil-Rich crumbler, 56', round bar, single basket, extendable pole

Flexi-Coil harrow/packer, 70', auto fold, track eliminator on hitch, 4-bar

Summers hyd. multiweeder, 70', 3 rank, flex wing, retracting danish tines, track eliminator, toolbox, 11L-15 tires, 5-bar harrow

Summers harrow, 70', 5-bar

Summers harrow, 60', track eliminators on hitch, 4-bar

Melroe harrow, 60', diamond harrow sections, auto fold

Melroe harrow, 50', auto fold, 5-bar

Summers Superchisel chisel plow, 40', floating hitch, walking tandems, 4" double pt. shovels, single pt. depth, light kit, toolbox, 11L-15 tires, spare tire, Summers 106 3-bar harrow, S/N60975

Friggstad chisel plow, 35', walking tandems, 4" beavertail, toolbox, 9.5L-15 tires, 3-bar harrow

Amco tandem disc, 38', rock cushion, scrapers, tandem, 11L-15 tires

IHC 490 tandem disc, 32', scrapers, tandems all around 

Glencoe field cultivator, 10', 3 pt., harrow

Chisel plow bar, 3 pt., 9 shank, double spring, used to work headlands

Bush Hog tandem disc, 8', 3 pt.

Tandem disc, 6', 3 pt.

 

 

SPRAYERS

2012 Apache AS1020 self-propelled sprayer, 132', Cummins engine, 2WD, adj. axles, Trimble auto steer, buddy seat, Raven Envizio Pro w/8-section control, Raven UltraGlide 5 sensor, Raven PowerGlide wheel kit, 1,000 gal. poly tank, triple nozzle bodies, 320/85R38 front tires, 380/90R46 rear tires, 1,113 hrs., S/N9120213

Top Aire 1600 pull-type sprayer, 132', 1,600 gal. poly tank, Raven control, 6-section control, triple nozzle bodies, touchdown wheels, 380/90R46 duals, S/NB25030119

 

SPRAY TRUCKS

2007 IHC 9400i tri-axle, ISX Cummins, 435 hp., 10 spd., lift tag, air ride, A/C, 26'x8' flatbed, (2) 1,650 gal. poly tanks, (2) 40 gal. mix cones, (2) 30 gal. mix cones, Honda 3" transfer pump w/electric start, hose reel, 12v hand washing station, hinged side gates to contain pallets, rear steps, 295/75R22.5 front tires, 11R22.5 rear tires, polished aluminum rims, 285,571 miles

1987 Ford L9000 tri-axle, L10 Cummins, 9 spd., lift tag, spring ride, 26' flatbed, (2) 1,650 gal. poly tanks, Honda 3" transfer pump, 2" fill, F&S  electric hose reel , (2) 60 gal. mix cones, hinged side gates for pallet containment, rear steps, 11R22.5 tires on steel rims

 

SEMI TRACTORS

2005 IHC 9400i tandem axle day cab, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 203" WB, 11R22.5 tires, front aluminum & rear steel rims, 801,341 miles

2004 IHC 9400i tandem day cab, ISX Cummins, 475 hp., 10 spd., engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 170" WB, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 11R22.5 tires on steel rims, 885,800 miles

 

BOX TRUCKS

(2) 2005 IHC 9400i tri-axles, ISX Cummins, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 648,087 miles & 706,689 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 663,821 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 4:11 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 709,663 miles

1999 Mack RD688S tri-axle, E7 E-Tech, 350 hp., Allison HD4560 6 spd., front lift-pusher, air up/down,  21' combo box, Headlift hoist, roll tarp, rear controls, combo end gate w/center door for beets, camelback susp., comes w/plastic bedliner, truck box vibrator, double frame, 5:32 Mack diff, 18,000 lb. front axle, 38,000 lb. rear axle,  315/80R22.5 front tires on aluminum rims, 11R24.5 tires on steel rims, 228,450 original miles

1978 Ford L9000 tri-axle, Detroit 60 Series, 13 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, beet equipped, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 13.80-20 front tires on steel rims, 10:00-20 rear tires on steel rims, 214,729 miles

1975 Ford L9000 tri-axle, 6V92 Detroit , 9 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 315/80R22.5 front tires on steel rims, 10:00-20 rear tires on steel rims, 439,123 miles

1972 & 1973 Chevrolet C65 tandem, twin screw, 366 gas, automatic,19-1/2'x8'x46" Frontier box, roll tarp, plumbed for drill fill, 10:00-20 tires, 68,023 miles & 26,927 miles

 

CEMENT TRUCK

1978 IHC 2554 tandem axle cement truck, Detroit 60 Series, 13 spd., spring ride, 425/65R22.5 front tires, 10:00-20 rear tires

 

PICKUPS

2008 Chevrolet 1500 Silverado, ext. cab, 5.3L, automatic, 4WD, long box, A/C, 235/85R17 tires, 220,000 miles, New engine at 186,000 miles

2000 Chevrolet 2500 LS, ext. cab, 5.3L, 4WD, long box, automatic, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/85R16 tires, 209,529 miles

1998 Chevrolet 2500 Silverado, ext. cab, V8 gas, automatic, 4WD, long box, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/75R16 tires, 303,763 miles

1998 Chevrolet 2500 Cheyenne, reg. cab, V8, 5 spd., 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 309,300 miles, less than 20,000 miles on new engine

1998 GMC 2500 SL, reg. cab, V8, automatic, 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 210,863 miles

1990 Ford F150, reg. cab, 6 cyl., automatic, 2WD, long box, 235/75R15 tires, shows 37,606 miles

 

TRAILERS

(2) 2015 Loadline tri-axle end dump trailers, 34', spring ride, air closed combo end gate, roll tarp, rear hoist controls, truck box vibrator, comes w/plastic bedliner, 425/65R22.5 tires on polished aluminum rims

Tandem flatbed trailer, 18'x83", wood deck, 3,000 lb. axles, 5-bolt wheels, spare tire, toolbox, 205/70R15 tires, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 16'x82", wood deck, 5,000 lb. axles, 1,000 gal. poly tank, hyd. pump, 235/85R16 tires on 6-bolt wheels, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 10'x72", 3,000 lb. axles, 50 gal. steel tank, 205/70R15 tires on 5-bolt wheels, No Title, non-roadable, Bill of Sale only

Triton tilt bed snowmobile trailer, 8'x8', wood deck, 18-1/2x8-1/2x8",No Title, Bill of Sale only

(2) Tandem axle skid steer trailers, 10'x6' & 10x7’, No Title, non-roadable, Bill of Sale only

Shop-built trailer from van, No Title, for storage only

 

SUGARBEET EQUIPMENT

2017 H&S 3052 beet cart, 30 ton, 52" belted elevator chain, hyd. drive, hyd. jack, 900/60R32 tires, S/N396

2013 Amity 3700 beet defoliator, 8x22", steel/studded/rubber, hyd. lift, shop-built row finder, row cleaners, 1000 PTO, S/N701548

2005 Amity 998 beet harvester, 8x22", Dee row finder, row finder raise kit to allow backing up, wheel fillers, folding boom, 1000 PTO, poly on grab rolls, S/NH335305

WIC defoliator, 6x22", steel/studded/rubber, knife scalpers, shop-built row finder, row cleaners

WIC 626C beet harvester, 6x22", row finder, w/winch lift to enable backing up, poly on grab rolls

WIC 826C beet harvester, 6x22", reconfigured to be a beet reclaimer

WIC 826C beet harvester, parts only

Melroe beet thinner/erosion control tool, 40', made from multiweeder

Alloway 3030 beet cultivator, 18x22", heavy single shank, lift assist, folding

(2) Swenson beet cultivators, 18x22", 2 pt., danish tine, tunnel shields, hyd. folding bar, lift assist, guide cones, (1) w/tunnel shields

(2) Brillion beet cultivators, 18x22"

Vicon mechanical beet thinner, 18x22", 3 pt.

(2) M&W rotary hoes, 44' & 22’, folding bar, gauge wheels, cab guard

 

GRAIN HANDLING EQUIPMENT

Walinga Agri-Vac 614F grain vac, 6", 1000 PTO, cleanup kit, rubber & steel flex tubing, rigid pipes, S/NMT614F-09-9409247

GT 5100 grain dryer, 500 bu., propane, batch, 1000 PTO, portable

Westfield 130-91 auger, 91'x13", mechanical swing low pro hopper, hyd. hopper walker, hyd. winch, flex spout, lights, 540 PTO

(2) Westgo 1310 augers, 60'x10", hyd. swing, 540 PTO

Co-op auger, 40'x8", 220v, 1 phase

Wheatheart hyd. drill fill auger, 16', telescoping poly spout, steel flighting

(2) Wheatheart hyd. end gate drill fill augers, (1) brush, (1) steel flighting, 12v

 

SCRAPERS, DITCHERS, & LASER EQUIPMENT

Ashland I-180 TS scraper, 18 yd., direct mount, hyd. push-off, laser mast, rear hyd., 29.5-25 tires

Ashland hyd. dump scraper, 4 yd., 9:00-20 tires

Orthman rotary wheel ditcher, 42", 3 pt., 1000 PTO

Tomson rotary wheel ditcher, 3 pt., 1000 PTO, hyd. parallel linkage

Amco rotary wheel ditcher, 18", 3 pt., 1000 PTO

Laser Beacon 5030AC laser, dual grade, Laser Alignment laser receiver, Laser Plane laser receiver, tripod & grade stick

 

IRRIGATION EQUIPMENT & WATER PUMPS

Irrigation pipe, connectors, misc.

Irrigation pump, diesel engine

Irrigation pump, 6", PTO, on 2-wheel transport

(2) Floating pumps, gas engine, discharge hose

Water pump, 16', 540 PTO, w/hose

Water pump, 16', 540 PTO, 2 pt. hitch

(2) Water pumps, 16', 540 PTO

 

OTHER EQUIPMENT

Vermeer pull-type twin rake, 23', 540 PTO, hyd. fold

Shop-built swath turner, 3-wheel, mounted

Dual 5000 dump wagon, 12 ton, walking tandem axle, 12-22.5 tires

Woods 106 ditch bank mower, 6' cut, 3 pt., weights, 540 PTO

Woods brush mower, 6', 3 pt.

 

TANKS & FUEL PUMPS

15,000 gal. horizontal fuel tank

(2) 12,000 gal. vertical fuel tanks, (1) on side

10,000 gal. vertical fuel tank

7,000 gal. vertical fuel tank

(2) Bennett fuel pumps, 120v, free standing

Fill-Rite fuel pump, 120v, 20 gpm

 

PARTS & TIRES

Amity knife scalpers, (4) New, (2) used

(5) WIC row finders

Planter boxes: (9) John Deere 71 Flex & (12) John Deere 1.6 bu., vacuum meters

(24) V-plows for row planter, unused

(43) Rydell bean knives: (43) approx. 60" & (24) approx. 48", 51", 60"

(4) Push plates for front of tractor

130 gal. poly tank, for Melroe Spra-Coupe

Pallet of truck air brake parts, most new

(3) Detroit engines, inline 6 cyl., running order, (1) on stand

(2) Chevrolet gas engines, 400 & 427 cubic inches

Cummins N14 engine on stand, running order

Detroit Silver 6V92 engine on pallet, running order

Ford V8 gas engine

(2) 380/90R46 tires at 90%  

(2) 11.2-24 tires at 90%, on rims

Truck, tractor & implement tires & rims

 

SHOP EQUIPMENT

Miller welder/generator, gas, 180 amp, 120/220v, oxyacetylene welder less tanks, side toolbox, fire extinguisher, jack, 2" ball hitch, 235/80R15 tires, mounted on shop-built 2-wheel trailer

Winco generator, 3 cyl. gas engine, 10,000 watts

Horizontal air compressor, 60 gal., 2 cyl., 5 hp., 220v, 1 phase

Eversman air compressor, PTO

Propane heater, 130,000 BTU, little use

 

FARM SUPPORT ITEMS

(2) Honda transfer pumps, 2"

(4) Screw-in fans, 120v

Safeway scaffold, (2) 3' end sections, (7) 5' sections, (2) 6' sections, cross braces

Electrical panel, 230v & 120v

 

DRISCOLL & DRISCOLL INC

Bruce, 701.739.2661

or Dave Krostue at Steffes Group, 701.203.8400, or 218.779.6865

or Gregg Holte at Steffes Group, 218.790.1705

 


Photo Gallery

No photos have been uploaded for this sale.
Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Driscoll & Driscoll Inc. Farm Retirement Auction

Steffes Group

Steffes Group


Contact: Chris Richard
Phone: 319-385-2000
Sale Location
18854 417th Ave SW East Grand Forks
East Grand Forks, MN 56721
Sale Dates and Times
Thursday Mar 19, 2020 Completed
Thursday Mar 26, 2020 Completed
Sale Terms and Conditions

Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

  • A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
  • A 2% buyer’s premium with a maximum charge of $500 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

  • Bank Wire Transfer; please call for wire instructions to be emailed to you.
  • Check delivered to our office that held the auction
  • Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

  • Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

All appropriate state sales tax laws will apply per the location and type of seller of the piece of equipment.

Please note that Minnesota does not consider regularly-scheduled consignment auctions as "auctions" but rather "consignment auctions," requiring sales tax to be charged unless the buyer provides an exemption form for qualifying items.

For purchases in South Dakota you are not exempt from any sales tax unless a 3rd party transports your items and you take possession outside of the State of South Dakota. In that case, the state laws where you take possession are effective. There are exceptions for dealers (retailers).

Click on the following for a tax exempt form: Minnesota Tax Link    North Dakota Tax Link    Iowa Tax Link 

ND Dakota titled vehicles

Per North Dakota vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged by the State of North Dakota on the entire sales price (including buyer’s premium) for any vehicle registered in North Dakota. 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

  • You complete an exemption certificate with a ND sales tax permit number
  • The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. 
All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

  • Removing and disposing as the Company sees fit.
  • Allowing seller to retain or scrap.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

  • The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.



Listing Details

FARM RETIREMENT AUCTION

 

LOCATION: On Hwy. 2 East near mile marker 6, on the east edge of East Grand Forks, MN.  (18854 417th Ave SW, East Grand Forks, MN 56721)

 

AUCTIONEER'S NOTE:  Major equipment begins selling at 11:00 AM. Live online bidding available on major equipment. 

 

Items highlighted in yellow are additions or changes from the original posting!

 

4WD TRACTORS

2008 Case-IH 535, 50th Steiger Anniversary Special, luxury cab, leather, powershift, 5 hyd., return flow, decelerator, Pro 700 monitor, integrated auto steer, RTK unlock, full wheel weight pkg., HID lights, cold start option, electric mirrors, ground spd. radar, 800/70R38 duals, 4,720 hrs., New duals Fall 2019, S/NZ7F108007

1996 Case-IH 9380, N14 Cummins, 12 spd. powershift, 4 hyd., Trimble EZ-Pilot, no receiver or display, front weights, (34) rear weights, 520/85R42 triples, 9,236 hrs., New engine at 7,073 hrs., S/NJEE0037952

 

MFWD TRACTORS

2007 Case-IH Magnum 245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, integrated auto steer, no receiver or display, (10) front weights, 380/85R34 front duals, 380/90R50 duals, 4,203 hrs., S/NZ6RZ01970

2006 Case-IH MX245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 triples, 5,782 hrs., S/NZ6RZ01589

2005 Case-IH MX230, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 duals, 6,055 hrs., S/NJAZ134487

1995 Case-IH 7250, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no display or receiver, (22) front weights, 380/85R30 front tires, 380/85R46 duals, shows 369.4 hrs., S/NJJA005855

1989 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, auto steer, no receiver or display, (5) front weights, 14.9-28 front tires, 320/90R46 duals, 3,267 hrs., S/NJJA0014922

1988 Case-IH 7130, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no receiver or display, (18) front weights, 14.9-28 front tires, 14.9-46 duals, 5,183 hrs., S/NJJA0005593

IHC 1486, CAH, TA, 8 spd., 3 hyd., 3 pt., 540/1000 PTO, 16.9-28 front tires, 520/85R42 rear tires, no duals  

 

2WD TRACTORS & LOADER

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 14.9-46 rear band duals, shows 1,693 hrs., S/NJJA0005673

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 320/90R46 rear band duals, shows 4,419 hrs., S/NJJA0007053

IHC 1066, CAH, factory cab, hydro, 3 hyd., 3 pt., 540/1000 PTO, IHC 2350 Mount-O-Matic loader, quick mount, 8' bucket, 10:00-15 front tires, 18.4-38 rear tires, shows 548 hrs., tag missing

 

GPS EQUIPMENT

(4) Trimble FM-1000 displays, RTK unlock, radio included, S/N39916663, S/N5311594729, S/N31799397, S/N33816699

(2) Trimble FM-750 displays, RTK, Water Management & sprayer boom control unlocks, radio included, S/N32968417

(6) Trimble AG25 receivers

 

HARVEST EQUIPMENT

2011 Case-IH 8120, axial flow, RWD, AFX, HD planetary w/diff lock, axle ext., high cap. lift cyl., rock trap, platform ext., Range Point auto steer, Nav II controller, 262 receiver, Pro 600 monitor, Y&M, radio, power adj. mirrors, HD variable header drive, small & large wire concaves, large grates, self-leveling shoe, adj. sieves, 2 spd. elevator, manual fold hopper ext., fine cut chopper, HID lighting, rear hitch, 520/85R42 front duals, 28L-26 rear tires, 1,108 sep. hrs., 1,551 engine hrs., S/NYBG211089

2011 Case-IH 2162 flex draper head, 40', single sickle drive, fore/aft, lights, slow spd. transport, Case-IH hookups, S/NYBZN14515

Universal UH14 edible bean head, 14', IHC hookups, S/N7501451

Sund pickup head, 14'

SSR Pump single axle header trailer, 30', flex bar

 

GRAIN CART

2012 J&M 875 grain cart, 875 bu., scale, roll tarp, 1000 PTO, 30.5-32 tires

 

PLANTERS

2006 John Deere DB44 MaxEmerge XP sugarbeet planter, 24x22", 1.6 bu. hoppers, insecticide, variable rate hyd. drive, Dawn screw adj. residue managers, markers, down pressure springs, liquid fertilizer, 500 gal. poly tank, ground drive pump, wind guards, erosion control shanks, sugarbeet & edible bean plates, S/NPADB44X710142

John Deere MaxEmerge vacuum planter, 18x22", 2 pt. w/lift assist, 1.6 bu. hoppers w/extension, down pressure springs, ground drive, hyd. folding bar, 200 monitor, markers, sugarbeet plates

 

AIR SEEDER

2006 Fargo Aire 4060 air seeder, double disc openers, 45', 6-3/4" spacing, Fargo Aire 2800 air cart, twin compartment, ground drive, never had fertilizer in it, seeder S/N502065, cart S/N505094

 

TILLAGE EQUIPMENT

Salford 570 RTS vertical tillage tool, 36', crumbler, weight pkg., 8-wave blades, 12.5L-15 tires, 3-bar harrow, new discs in 2018, S/NF02948

DMI Tiger-Mate II field cultivator, 60', 5-section, 6" knock-on shovels, hyd. rear hitch, walking tandems, toolbox, 11L-15 tires, 3-bar harrow

Wil-Rich crumbler, 56', round bar, single basket, extendable pole

Flexi-Coil harrow/packer, 70', auto fold, track eliminator on hitch, 4-bar

Summers hyd. multiweeder, 70', 3 rank, flex wing, retracting danish tines, track eliminator, toolbox, 11L-15 tires, 5-bar harrow

Summers harrow, 70', 5-bar

Summers harrow, 60', track eliminators on hitch, 4-bar

Melroe harrow, 60', diamond harrow sections, auto fold

Melroe harrow, 50', auto fold, 5-bar

Summers Superchisel chisel plow, 40', floating hitch, walking tandems, 4" double pt. shovels, single pt. depth, light kit, toolbox, 11L-15 tires, spare tire, Summers 106 3-bar harrow, S/N60975

Friggstad chisel plow, 35', walking tandems, 4" beavertail, toolbox, 9.5L-15 tires, 3-bar harrow

Amco tandem disc, 38', rock cushion, scrapers, tandem, 11L-15 tires

IHC 490 tandem disc, 32', scrapers, tandems all around 

Glencoe field cultivator, 10', 3 pt., harrow

Chisel plow bar, 3 pt., 9 shank, double spring, used to work headlands

Bush Hog tandem disc, 8', 3 pt.

Tandem disc, 6', 3 pt.

 

 

SPRAYERS

2012 Apache AS1020 self-propelled sprayer, 132', Cummins engine, 2WD, adj. axles, Trimble auto steer, buddy seat, Raven Envizio Pro w/8-section control, Raven UltraGlide 5 sensor, Raven PowerGlide wheel kit, 1,000 gal. poly tank, triple nozzle bodies, 320/85R38 front tires, 380/90R46 rear tires, 1,113 hrs., S/N9120213

Top Aire 1600 pull-type sprayer, 132', 1,600 gal. poly tank, Raven control, 6-section control, triple nozzle bodies, touchdown wheels, 380/90R46 duals, S/NB25030119

 

SPRAY TRUCKS

2007 IHC 9400i tri-axle, ISX Cummins, 435 hp., 10 spd., lift tag, air ride, A/C, 26'x8' flatbed, (2) 1,650 gal. poly tanks, (2) 40 gal. mix cones, (2) 30 gal. mix cones, Honda 3" transfer pump w/electric start, hose reel, 12v hand washing station, hinged side gates to contain pallets, rear steps, 295/75R22.5 front tires, 11R22.5 rear tires, polished aluminum rims, 285,571 miles

1987 Ford L9000 tri-axle, L10 Cummins, 9 spd., lift tag, spring ride, 26' flatbed, (2) 1,650 gal. poly tanks, Honda 3" transfer pump, 2" fill, F&S  electric hose reel , (2) 60 gal. mix cones, hinged side gates for pallet containment, rear steps, 11R22.5 tires on steel rims

 

SEMI TRACTORS

2005 IHC 9400i tandem axle day cab, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 203" WB, 11R22.5 tires, front aluminum & rear steel rims, 801,341 miles

2004 IHC 9400i tandem day cab, ISX Cummins, 475 hp., 10 spd., engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 170" WB, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 11R22.5 tires on steel rims, 885,800 miles

 

BOX TRUCKS

(2) 2005 IHC 9400i tri-axles, ISX Cummins, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 648,087 miles & 706,689 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 663,821 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 4:11 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 709,663 miles

1999 Mack RD688S tri-axle, E7 E-Tech, 350 hp., Allison HD4560 6 spd., front lift-pusher, air up/down,  21' combo box, Headlift hoist, roll tarp, rear controls, combo end gate w/center door for beets, camelback susp., comes w/plastic bedliner, truck box vibrator, double frame, 5:32 Mack diff, 18,000 lb. front axle, 38,000 lb. rear axle,  315/80R22.5 front tires on aluminum rims, 11R24.5 tires on steel rims, 228,450 original miles

1978 Ford L9000 tri-axle, Detroit 60 Series, 13 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, beet equipped, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 13.80-20 front tires on steel rims, 10:00-20 rear tires on steel rims, 214,729 miles

1975 Ford L9000 tri-axle, 6V92 Detroit , 9 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 315/80R22.5 front tires on steel rims, 10:00-20 rear tires on steel rims, 439,123 miles

1972 & 1973 Chevrolet C65 tandem, twin screw, 366 gas, automatic,19-1/2'x8'x46" Frontier box, roll tarp, plumbed for drill fill, 10:00-20 tires, 68,023 miles & 26,927 miles

 

CEMENT TRUCK

1978 IHC 2554 tandem axle cement truck, Detroit 60 Series, 13 spd., spring ride, 425/65R22.5 front tires, 10:00-20 rear tires

 

PICKUPS

2008 Chevrolet 1500 Silverado, ext. cab, 5.3L, automatic, 4WD, long box, A/C, 235/85R17 tires, 220,000 miles, New engine at 186,000 miles

2000 Chevrolet 2500 LS, ext. cab, 5.3L, 4WD, long box, automatic, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/85R16 tires, 209,529 miles

1998 Chevrolet 2500 Silverado, ext. cab, V8 gas, automatic, 4WD, long box, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/75R16 tires, 303,763 miles

1998 Chevrolet 2500 Cheyenne, reg. cab, V8, 5 spd., 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 309,300 miles, less than 20,000 miles on new engine

1998 GMC 2500 SL, reg. cab, V8, automatic, 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 210,863 miles

1990 Ford F150, reg. cab, 6 cyl., automatic, 2WD, long box, 235/75R15 tires, shows 37,606 miles

 

TRAILERS

(2) 2015 Loadline tri-axle end dump trailers, 34', spring ride, air closed combo end gate, roll tarp, rear hoist controls, truck box vibrator, comes w/plastic bedliner, 425/65R22.5 tires on polished aluminum rims

Tandem flatbed trailer, 18'x83", wood deck, 3,000 lb. axles, 5-bolt wheels, spare tire, toolbox, 205/70R15 tires, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 16'x82", wood deck, 5,000 lb. axles, 1,000 gal. poly tank, hyd. pump, 235/85R16 tires on 6-bolt wheels, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 10'x72", 3,000 lb. axles, 50 gal. steel tank, 205/70R15 tires on 5-bolt wheels, No Title, non-roadable, Bill of Sale only

Triton tilt bed snowmobile trailer, 8'x8', wood deck, 18-1/2x8-1/2x8",No Title, Bill of Sale only

(2) Tandem axle skid steer trailers, 10'x6' & 10x7’, No Title, non-roadable, Bill of Sale only

Shop-built trailer from van, No Title, for storage only

 

SUGARBEET EQUIPMENT

2017 H&S 3052 beet cart, 30 ton, 52" belted elevator chain, hyd. drive, hyd. jack, 900/60R32 tires, S/N396

2013 Amity 3700 beet defoliator, 8x22", steel/studded/rubber, hyd. lift, shop-built row finder, row cleaners, 1000 PTO, S/N701548

2005 Amity 998 beet harvester, 8x22", Dee row finder, row finder raise kit to allow backing up, wheel fillers, folding boom, 1000 PTO, poly on grab rolls, S/NH335305

WIC defoliator, 6x22", steel/studded/rubber, knife scalpers, shop-built row finder, row cleaners

WIC 626C beet harvester, 6x22", row finder, w/winch lift to enable backing up, poly on grab rolls

WIC 826C beet harvester, 6x22", reconfigured to be a beet reclaimer

WIC 826C beet harvester, parts only

Melroe beet thinner/erosion control tool, 40', made from multiweeder

Alloway 3030 beet cultivator, 18x22", heavy single shank, lift assist, folding

(2) Swenson beet cultivators, 18x22", 2 pt., danish tine, tunnel shields, hyd. folding bar, lift assist, guide cones, (1) w/tunnel shields

(2) Brillion beet cultivators, 18x22"

Vicon mechanical beet thinner, 18x22", 3 pt.

(2) M&W rotary hoes, 44' & 22’, folding bar, gauge wheels, cab guard

 

GRAIN HANDLING EQUIPMENT

Walinga Agri-Vac 614F grain vac, 6", 1000 PTO, cleanup kit, rubber & steel flex tubing, rigid pipes, S/NMT614F-09-9409247

GT 5100 grain dryer, 500 bu., propane, batch, 1000 PTO, portable

Westfield 130-91 auger, 91'x13", mechanical swing low pro hopper, hyd. hopper walker, hyd. winch, flex spout, lights, 540 PTO

(2) Westgo 1310 augers, 60'x10", hyd. swing, 540 PTO

Co-op auger, 40'x8", 220v, 1 phase

Wheatheart hyd. drill fill auger, 16', telescoping poly spout, steel flighting

(2) Wheatheart hyd. end gate drill fill augers, (1) brush, (1) steel flighting, 12v

 

SCRAPERS, DITCHERS, & LASER EQUIPMENT

Ashland I-180 TS scraper, 18 yd., direct mount, hyd. push-off, laser mast, rear hyd., 29.5-25 tires

Ashland hyd. dump scraper, 4 yd., 9:00-20 tires

Orthman rotary wheel ditcher, 42", 3 pt., 1000 PTO

Tomson rotary wheel ditcher, 3 pt., 1000 PTO, hyd. parallel linkage

Amco rotary wheel ditcher, 18", 3 pt., 1000 PTO

Laser Beacon 5030AC laser, dual grade, Laser Alignment laser receiver, Laser Plane laser receiver, tripod & grade stick

 

IRRIGATION EQUIPMENT & WATER PUMPS

Irrigation pipe, connectors, misc.

Irrigation pump, diesel engine

Irrigation pump, 6", PTO, on 2-wheel transport

(2) Floating pumps, gas engine, discharge hose

Water pump, 16', 540 PTO, w/hose

Water pump, 16', 540 PTO, 2 pt. hitch

(2) Water pumps, 16', 540 PTO

 

OTHER EQUIPMENT

Vermeer pull-type twin rake, 23', 540 PTO, hyd. fold

Shop-built swath turner, 3-wheel, mounted

Dual 5000 dump wagon, 12 ton, walking tandem axle, 12-22.5 tires

Woods 106 ditch bank mower, 6' cut, 3 pt., weights, 540 PTO

Woods brush mower, 6', 3 pt.

 

TANKS & FUEL PUMPS

15,000 gal. horizontal fuel tank

(2) 12,000 gal. vertical fuel tanks, (1) on side

10,000 gal. vertical fuel tank

7,000 gal. vertical fuel tank

(2) Bennett fuel pumps, 120v, free standing

Fill-Rite fuel pump, 120v, 20 gpm

 

PARTS & TIRES

Amity knife scalpers, (4) New, (2) used

(5) WIC row finders

Planter boxes: (9) John Deere 71 Flex & (12) John Deere 1.6 bu., vacuum meters

(24) V-plows for row planter, unused

(43) Rydell bean knives: (43) approx. 60" & (24) approx. 48", 51", 60"

(4) Push plates for front of tractor

130 gal. poly tank, for Melroe Spra-Coupe

Pallet of truck air brake parts, most new

(3) Detroit engines, inline 6 cyl., running order, (1) on stand

(2) Chevrolet gas engines, 400 & 427 cubic inches

Cummins N14 engine on stand, running order

Detroit Silver 6V92 engine on pallet, running order

Ford V8 gas engine

(2) 380/90R46 tires at 90%  

(2) 11.2-24 tires at 90%, on rims

Truck, tractor & implement tires & rims

 

SHOP EQUIPMENT

Miller welder/generator, gas, 180 amp, 120/220v, oxyacetylene welder less tanks, side toolbox, fire extinguisher, jack, 2" ball hitch, 235/80R15 tires, mounted on shop-built 2-wheel trailer

Winco generator, 3 cyl. gas engine, 10,000 watts

Horizontal air compressor, 60 gal., 2 cyl., 5 hp., 220v, 1 phase

Eversman air compressor, PTO

Propane heater, 130,000 BTU, little use

 

FARM SUPPORT ITEMS

(2) Honda transfer pumps, 2"

(4) Screw-in fans, 120v

Safeway scaffold, (2) 3' end sections, (7) 5' sections, (2) 6' sections, cross braces

Electrical panel, 230v & 120v

 

DRISCOLL & DRISCOLL INC

Bruce, 701.739.2661

or Dave Krostue at Steffes Group, 701.203.8400, or 218.779.6865

or Gregg Holte at Steffes Group, 218.790.1705

 


Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Driscoll & Driscoll Inc. Farm Retirement Auction
 Live Auction w/Online Bidding
Sale Date(s)
Thursday Mar 19, 2020 Completed
Thursday Mar 26, 2020 Completed
Sale Location

East Grand Forks, MN 56721
Listing Terms and Conditions

Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

  • A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
  • A 2% buyer’s premium with a maximum charge of $500 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

  • Bank Wire Transfer; please call for wire instructions to be emailed to you.
  • Check delivered to our office that held the auction
  • Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

  • Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

All appropriate state sales tax laws will apply per the location and type of seller of the piece of equipment.

Please note that Minnesota does not consider regularly-scheduled consignment auctions as "auctions" but rather "consignment auctions," requiring sales tax to be charged unless the buyer provides an exemption form for qualifying items.

For purchases in South Dakota you are not exempt from any sales tax unless a 3rd party transports your items and you take possession outside of the State of South Dakota. In that case, the state laws where you take possession are effective. There are exceptions for dealers (retailers).

Click on the following for a tax exempt form: Minnesota Tax Link    North Dakota Tax Link    Iowa Tax Link 

ND Dakota titled vehicles

Per North Dakota vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged by the State of North Dakota on the entire sales price (including buyer’s premium) for any vehicle registered in North Dakota. 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

  • You complete an exemption certificate with a ND sales tax permit number
  • The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. 
All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

  • Removing and disposing as the Company sees fit.
  • Allowing seller to retain or scrap.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

  • The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
  • Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.



FARM RETIREMENT AUCTION

 

LOCATION: On Hwy. 2 East near mile marker 6, on the east edge of East Grand Forks, MN.  (18854 417th Ave SW, East Grand Forks, MN 56721)

 

AUCTIONEER'S NOTE:  Major equipment begins selling at 11:00 AM. Live online bidding available on major equipment. 

 

Items highlighted in yellow are additions or changes from the original posting!

 

4WD TRACTORS

2008 Case-IH 535, 50th Steiger Anniversary Special, luxury cab, leather, powershift, 5 hyd., return flow, decelerator, Pro 700 monitor, integrated auto steer, RTK unlock, full wheel weight pkg., HID lights, cold start option, electric mirrors, ground spd. radar, 800/70R38 duals, 4,720 hrs., New duals Fall 2019, S/NZ7F108007

1996 Case-IH 9380, N14 Cummins, 12 spd. powershift, 4 hyd., Trimble EZ-Pilot, no receiver or display, front weights, (34) rear weights, 520/85R42 triples, 9,236 hrs., New engine at 7,073 hrs., S/NJEE0037952

 

MFWD TRACTORS

2007 Case-IH Magnum 245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, integrated auto steer, no receiver or display, (10) front weights, 380/85R34 front duals, 380/90R50 duals, 4,203 hrs., S/NZ6RZ01970

2006 Case-IH MX245, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 triples, 5,782 hrs., S/NZ6RZ01589

2005 Case-IH MX230, buddy seat, powershift, 4 hyd., return flow, 3 pt., quick hitch, (3) PTO's, auto steer, no receiver or display, (10) front weights, 380/85R34 front tires, 380/90R50 duals, 6,055 hrs., S/NJAZ134487

1995 Case-IH 7250, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no display or receiver, (22) front weights, 380/85R30 front tires, 380/85R46 duals, shows 369.4 hrs., S/NJJA005855

1989 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, auto steer, no receiver or display, (5) front weights, 14.9-28 front tires, 320/90R46 duals, 3,267 hrs., S/NJJA0014922

1988 Case-IH 7130, powershift, 4 hyd., 3 pt., 1000 PTO, auto steer, no receiver or display, (18) front weights, 14.9-28 front tires, 14.9-46 duals, 5,183 hrs., S/NJJA0005593

IHC 1486, CAH, TA, 8 spd., 3 hyd., 3 pt., 540/1000 PTO, 16.9-28 front tires, 520/85R42 rear tires, no duals  

 

2WD TRACTORS & LOADER

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 14.9-46 rear band duals, shows 1,693 hrs., S/NJJA0005673

1988 Case-IH 7120, powershift, 4 hyd., 3 pt., 540/1000 PTO, (10) front weights, 10:00-16 front tires, 320/90R46 rear band duals, shows 4,419 hrs., S/NJJA0007053

IHC 1066, CAH, factory cab, hydro, 3 hyd., 3 pt., 540/1000 PTO, IHC 2350 Mount-O-Matic loader, quick mount, 8' bucket, 10:00-15 front tires, 18.4-38 rear tires, shows 548 hrs., tag missing

 

GPS EQUIPMENT

(4) Trimble FM-1000 displays, RTK unlock, radio included, S/N39916663, S/N5311594729, S/N31799397, S/N33816699

(2) Trimble FM-750 displays, RTK, Water Management & sprayer boom control unlocks, radio included, S/N32968417

(6) Trimble AG25 receivers

 

HARVEST EQUIPMENT

2011 Case-IH 8120, axial flow, RWD, AFX, HD planetary w/diff lock, axle ext., high cap. lift cyl., rock trap, platform ext., Range Point auto steer, Nav II controller, 262 receiver, Pro 600 monitor, Y&M, radio, power adj. mirrors, HD variable header drive, small & large wire concaves, large grates, self-leveling shoe, adj. sieves, 2 spd. elevator, manual fold hopper ext., fine cut chopper, HID lighting, rear hitch, 520/85R42 front duals, 28L-26 rear tires, 1,108 sep. hrs., 1,551 engine hrs., S/NYBG211089

2011 Case-IH 2162 flex draper head, 40', single sickle drive, fore/aft, lights, slow spd. transport, Case-IH hookups, S/NYBZN14515

Universal UH14 edible bean head, 14', IHC hookups, S/N7501451

Sund pickup head, 14'

SSR Pump single axle header trailer, 30', flex bar

 

GRAIN CART

2012 J&M 875 grain cart, 875 bu., scale, roll tarp, 1000 PTO, 30.5-32 tires

 

PLANTERS

2006 John Deere DB44 MaxEmerge XP sugarbeet planter, 24x22", 1.6 bu. hoppers, insecticide, variable rate hyd. drive, Dawn screw adj. residue managers, markers, down pressure springs, liquid fertilizer, 500 gal. poly tank, ground drive pump, wind guards, erosion control shanks, sugarbeet & edible bean plates, S/NPADB44X710142

John Deere MaxEmerge vacuum planter, 18x22", 2 pt. w/lift assist, 1.6 bu. hoppers w/extension, down pressure springs, ground drive, hyd. folding bar, 200 monitor, markers, sugarbeet plates

 

AIR SEEDER

2006 Fargo Aire 4060 air seeder, double disc openers, 45', 6-3/4" spacing, Fargo Aire 2800 air cart, twin compartment, ground drive, never had fertilizer in it, seeder S/N502065, cart S/N505094

 

TILLAGE EQUIPMENT

Salford 570 RTS vertical tillage tool, 36', crumbler, weight pkg., 8-wave blades, 12.5L-15 tires, 3-bar harrow, new discs in 2018, S/NF02948

DMI Tiger-Mate II field cultivator, 60', 5-section, 6" knock-on shovels, hyd. rear hitch, walking tandems, toolbox, 11L-15 tires, 3-bar harrow

Wil-Rich crumbler, 56', round bar, single basket, extendable pole

Flexi-Coil harrow/packer, 70', auto fold, track eliminator on hitch, 4-bar

Summers hyd. multiweeder, 70', 3 rank, flex wing, retracting danish tines, track eliminator, toolbox, 11L-15 tires, 5-bar harrow

Summers harrow, 70', 5-bar

Summers harrow, 60', track eliminators on hitch, 4-bar

Melroe harrow, 60', diamond harrow sections, auto fold

Melroe harrow, 50', auto fold, 5-bar

Summers Superchisel chisel plow, 40', floating hitch, walking tandems, 4" double pt. shovels, single pt. depth, light kit, toolbox, 11L-15 tires, spare tire, Summers 106 3-bar harrow, S/N60975

Friggstad chisel plow, 35', walking tandems, 4" beavertail, toolbox, 9.5L-15 tires, 3-bar harrow

Amco tandem disc, 38', rock cushion, scrapers, tandem, 11L-15 tires

IHC 490 tandem disc, 32', scrapers, tandems all around 

Glencoe field cultivator, 10', 3 pt., harrow

Chisel plow bar, 3 pt., 9 shank, double spring, used to work headlands

Bush Hog tandem disc, 8', 3 pt.

Tandem disc, 6', 3 pt.

 

 

SPRAYERS

2012 Apache AS1020 self-propelled sprayer, 132', Cummins engine, 2WD, adj. axles, Trimble auto steer, buddy seat, Raven Envizio Pro w/8-section control, Raven UltraGlide 5 sensor, Raven PowerGlide wheel kit, 1,000 gal. poly tank, triple nozzle bodies, 320/85R38 front tires, 380/90R46 rear tires, 1,113 hrs., S/N9120213

Top Aire 1600 pull-type sprayer, 132', 1,600 gal. poly tank, Raven control, 6-section control, triple nozzle bodies, touchdown wheels, 380/90R46 duals, S/NB25030119

 

SPRAY TRUCKS

2007 IHC 9400i tri-axle, ISX Cummins, 435 hp., 10 spd., lift tag, air ride, A/C, 26'x8' flatbed, (2) 1,650 gal. poly tanks, (2) 40 gal. mix cones, (2) 30 gal. mix cones, Honda 3" transfer pump w/electric start, hose reel, 12v hand washing station, hinged side gates to contain pallets, rear steps, 295/75R22.5 front tires, 11R22.5 rear tires, polished aluminum rims, 285,571 miles

1987 Ford L9000 tri-axle, L10 Cummins, 9 spd., lift tag, spring ride, 26' flatbed, (2) 1,650 gal. poly tanks, Honda 3" transfer pump, 2" fill, F&S  electric hose reel , (2) 60 gal. mix cones, hinged side gates for pallet containment, rear steps, 11R22.5 tires on steel rims

 

SEMI TRACTORS

2005 IHC 9400i tandem axle day cab, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 203" WB, 11R22.5 tires, front aluminum & rear steel rims, 801,341 miles

2004 IHC 9400i tandem day cab, ISX Cummins, 475 hp., 10 spd., engine brake, air ride, sliding 5th, twin aluminum fuel tanks, 2-line wet kit, 1/2 fenders, wheel cleaners, 170" WB, 12,000 lb. front axle, 40,000 lb. rear axle, 4:11 ratio, 11R22.5 tires on steel rims, 885,800 miles

 

BOX TRUCKS

(2) 2005 IHC 9400i tri-axles, ISX Cummins, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 648,087 miles & 706,689 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp, 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 3:55 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 663,821 miles

2005 IHC 9400i tri-axle, ISX Cummins, 435 hp., 3-pedal Eaton 10 spd. auto shift, lift tag, air ride, 22'x8' Knights Welding box, roll tarp, combo end gate, Headlift hoist, beet equipped, truck box vibrator, wheel cleaners, 4:11 ratio, 12,000 lb. front axle, 40,000 lb. rear axle, 315/80R22.5 steer tires on aluminum rims, 11R22.5 drive tires on steel rims, 295/75R22.5 tag axle tires on steel rims, 709,663 miles

1999 Mack RD688S tri-axle, E7 E-Tech, 350 hp., Allison HD4560 6 spd., front lift-pusher, air up/down,  21' combo box, Headlift hoist, roll tarp, rear controls, combo end gate w/center door for beets, camelback susp., comes w/plastic bedliner, truck box vibrator, double frame, 5:32 Mack diff, 18,000 lb. front axle, 38,000 lb. rear axle,  315/80R22.5 front tires on aluminum rims, 11R24.5 tires on steel rims, 228,450 original miles

1978 Ford L9000 tri-axle, Detroit 60 Series, 13 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, beet equipped, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 13.80-20 front tires on steel rims, 10:00-20 rear tires on steel rims, 214,729 miles

1975 Ford L9000 tri-axle, 6V92 Detroit , 9 spd., lift tag, spring ride, 22'x8'x66" Magnum box, combo end gate, roll tarp, Headlift hoist, truck box vibrator, 12,000 lb. front axle, 38,000 lb. rear axle, 315/80R22.5 front tires on steel rims, 10:00-20 rear tires on steel rims, 439,123 miles

1972 & 1973 Chevrolet C65 tandem, twin screw, 366 gas, automatic,19-1/2'x8'x46" Frontier box, roll tarp, plumbed for drill fill, 10:00-20 tires, 68,023 miles & 26,927 miles

 

CEMENT TRUCK

1978 IHC 2554 tandem axle cement truck, Detroit 60 Series, 13 spd., spring ride, 425/65R22.5 front tires, 10:00-20 rear tires

 

PICKUPS

2008 Chevrolet 1500 Silverado, ext. cab, 5.3L, automatic, 4WD, long box, A/C, 235/85R17 tires, 220,000 miles, New engine at 186,000 miles

2000 Chevrolet 2500 LS, ext. cab, 5.3L, 4WD, long box, automatic, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/85R16 tires, 209,529 miles

1998 Chevrolet 2500 Silverado, ext. cab, V8 gas, automatic, 4WD, long box, A/C, fuel tank w/12v pump, (2) side toolboxes, 245/75R16 tires, 303,763 miles

1998 Chevrolet 2500 Cheyenne, reg. cab, V8, 5 spd., 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 309,300 miles, less than 20,000 miles on new engine

1998 GMC 2500 SL, reg. cab, V8, automatic, 2WD, long box, A/C, fuel tank w/12v pump, 245/75R16 tires, 210,863 miles

1990 Ford F150, reg. cab, 6 cyl., automatic, 2WD, long box, 235/75R15 tires, shows 37,606 miles

 

TRAILERS

(2) 2015 Loadline tri-axle end dump trailers, 34', spring ride, air closed combo end gate, roll tarp, rear hoist controls, truck box vibrator, comes w/plastic bedliner, 425/65R22.5 tires on polished aluminum rims

Tandem flatbed trailer, 18'x83", wood deck, 3,000 lb. axles, 5-bolt wheels, spare tire, toolbox, 205/70R15 tires, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 16'x82", wood deck, 5,000 lb. axles, 1,000 gal. poly tank, hyd. pump, 235/85R16 tires on 6-bolt wheels, No Title, non-roadable, Bill of Sale only

Flatbed trailer, 10'x72", 3,000 lb. axles, 50 gal. steel tank, 205/70R15 tires on 5-bolt wheels, No Title, non-roadable, Bill of Sale only

Triton tilt bed snowmobile trailer, 8'x8', wood deck, 18-1/2x8-1/2x8",No Title, Bill of Sale only

(2) Tandem axle skid steer trailers, 10'x6' & 10x7’, No Title, non-roadable, Bill of Sale only

Shop-built trailer from van, No Title, for storage only

 

SUGARBEET EQUIPMENT

2017 H&S 3052 beet cart, 30 ton, 52" belted elevator chain, hyd. drive, hyd. jack, 900/60R32 tires, S/N396

2013 Amity 3700 beet defoliator, 8x22", steel/studded/rubber, hyd. lift, shop-built row finder, row cleaners, 1000 PTO, S/N701548

2005 Amity 998 beet harvester, 8x22", Dee row finder, row finder raise kit to allow backing up, wheel fillers, folding boom, 1000 PTO, poly on grab rolls, S/NH335305

WIC defoliator, 6x22", steel/studded/rubber, knife scalpers, shop-built row finder, row cleaners

WIC 626C beet harvester, 6x22", row finder, w/winch lift to enable backing up, poly on grab rolls

WIC 826C beet harvester, 6x22", reconfigured to be a beet reclaimer

WIC 826C beet harvester, parts only

Melroe beet thinner/erosion control tool, 40', made from multiweeder

Alloway 3030 beet cultivator, 18x22", heavy single shank, lift assist, folding

(2) Swenson beet cultivators, 18x22", 2 pt., danish tine, tunnel shields, hyd. folding bar, lift assist, guide cones, (1) w/tunnel shields

(2) Brillion beet cultivators, 18x22"

Vicon mechanical beet thinner, 18x22", 3 pt.

(2) M&W rotary hoes, 44' & 22’, folding bar, gauge wheels, cab guard

 

GRAIN HANDLING EQUIPMENT

Walinga Agri-Vac 614F grain vac, 6", 1000 PTO, cleanup kit, rubber & steel flex tubing, rigid pipes, S/NMT614F-09-9409247

GT 5100 grain dryer, 500 bu., propane, batch, 1000 PTO, portable

Westfield 130-91 auger, 91'x13", mechanical swing low pro hopper, hyd. hopper walker, hyd. winch, flex spout, lights, 540 PTO

(2) Westgo 1310 augers, 60'x10", hyd. swing, 540 PTO

Co-op auger, 40'x8", 220v, 1 phase

Wheatheart hyd. drill fill auger, 16', telescoping poly spout, steel flighting

(2) Wheatheart hyd. end gate drill fill augers, (1) brush, (1) steel flighting, 12v

 

SCRAPERS, DITCHERS, & LASER EQUIPMENT

Ashland I-180 TS scraper, 18 yd., direct mount, hyd. push-off, laser mast, rear hyd., 29.5-25 tires

Ashland hyd. dump scraper, 4 yd., 9:00-20 tires

Orthman rotary wheel ditcher, 42", 3 pt., 1000 PTO

Tomson rotary wheel ditcher, 3 pt., 1000 PTO, hyd. parallel linkage

Amco rotary wheel ditcher, 18", 3 pt., 1000 PTO

Laser Beacon 5030AC laser, dual grade, Laser Alignment laser receiver, Laser Plane laser receiver, tripod & grade stick

 

IRRIGATION EQUIPMENT & WATER PUMPS

Irrigation pipe, connectors, misc.

Irrigation pump, diesel engine

Irrigation pump, 6", PTO, on 2-wheel transport

(2) Floating pumps, gas engine, discharge hose

Water pump, 16', 540 PTO, w/hose

Water pump, 16', 540 PTO, 2 pt. hitch

(2) Water pumps, 16', 540 PTO

 

OTHER EQUIPMENT

Vermeer pull-type twin rake, 23', 540 PTO, hyd. fold

Shop-built swath turner, 3-wheel, mounted

Dual 5000 dump wagon, 12 ton, walking tandem axle, 12-22.5 tires

Woods 106 ditch bank mower, 6' cut, 3 pt., weights, 540 PTO

Woods brush mower, 6', 3 pt.

 

TANKS & FUEL PUMPS

15,000 gal. horizontal fuel tank

(2) 12,000 gal. vertical fuel tanks, (1) on side

10,000 gal. vertical fuel tank

7,000 gal. vertical fuel tank

(2) Bennett fuel pumps, 120v, free standing

Fill-Rite fuel pump, 120v, 20 gpm

 

PARTS & TIRES

Amity knife scalpers, (4) New, (2) used

(5) WIC row finders

Planter boxes: (9) John Deere 71 Flex & (12) John Deere 1.6 bu., vacuum meters

(24) V-plows for row planter, unused

(43) Rydell bean knives: (43) approx. 60" & (24) approx. 48", 51", 60"

(4) Push plates for front of tractor

130 gal. poly tank, for Melroe Spra-Coupe

Pallet of truck air brake parts, most new

(3) Detroit engines, inline 6 cyl., running order, (1) on stand

(2) Chevrolet gas engines, 400 & 427 cubic inches

Cummins N14 engine on stand, running order

Detroit Silver 6V92 engine on pallet, running order

Ford V8 gas engine

(2) 380/90R46 tires at 90%  

(2) 11.2-24 tires at 90%, on rims

Truck, tractor & implement tires & rims

 

SHOP EQUIPMENT

Miller welder/generator, gas, 180 amp, 120/220v, oxyacetylene welder less tanks, side toolbox, fire extinguisher, jack, 2" ball hitch, 235/80R15 tires, mounted on shop-built 2-wheel trailer

Winco generator, 3 cyl. gas engine, 10,000 watts

Horizontal air compressor, 60 gal., 2 cyl., 5 hp., 220v, 1 phase

Eversman air compressor, PTO

Propane heater, 130,000 BTU, little use

 

FARM SUPPORT ITEMS

(2) Honda transfer pumps, 2"

(4) Screw-in fans, 120v

Safeway scaffold, (2) 3' end sections, (7) 5' sections, (2) 6' sections, cross braces

Electrical panel, 230v & 120v

 

DRISCOLL & DRISCOLL INC

Bruce, 701.739.2661

or Dave Krostue at Steffes Group, 701.203.8400, or 218.779.6865

or Gregg Holte at Steffes Group, 218.790.1705