NEOPHOTONICS: RF, Digital & Analog Electronic Test Equipment
Listing ID#: 306485

Sale Location

, CA
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Wednesday Mar 11, 08:00 AM
Bidding Ends: Tuesday Mar 17, 01:00 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Equipment Dispositions

Phone: 408-402-2436
Email: jr@edispositions.com
Website: edispositions.com

EstateSale.com ID#: 10990
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

TERMS AND CONDITIONS


 



  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  

  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.

  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.

  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.

  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.

  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.

  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.

  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.

  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.

  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 

  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  

  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.

  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.

  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.

  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.

  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.

  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.

  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.

  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.

  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.

  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.

  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.

  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 

  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 

  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 

  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.

  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.

  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


Listing Information

1
Agilent 86105A 20 GHz Optical / Electrical Module OPT. 202

1
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM - Gilroy
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM. It comes with a NanoScope Dimension 9000M/9300M Microscope Controller, Power Controller, Dimension 9000 Facilities T...

1
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400 - Gilroy
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400. Powers up as shown. It comes with everything shown, including an XLS-100 Head, a Wafer Standard (250Å SiO2 on Silicon...

1
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy

1
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox - Gilroy
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox. Powers up as shown. The glovebox measures about 7 feet long, has four gloves installed, and it has an Antechamber attached to the right...

1
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot - Gilroy
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot. Features a Genmark robot and prealigner, along with an Olympus MX80-F Wafer Inspection Microscope with 5X, 10X Objectives.

1
Vitronics Soltec XPM520 Reflow Oven (20"Wide Belt) KIC Thermal Profiling - Gilroy

1
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder - Gilroy
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder. It does appear to be missing the computer, and there are some loose cables on the back, so I am not sure what else is m...

1
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer - Gilroy
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer. Powers up as shown. One of the monitors does not power on.

1
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber - Gilroy
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber. Powers on as shown.

1
Thermotron S-16 Mini-Max Environmental Chamber (460VAC, 3Ph) - Gilroy

1
Plasma-Etch PE-100 Plasma System, Model: PE-100, Serial Number: 081612, Includes: Laptop Controller, Edwards XDS10 Dry Scroll Pump, Connecting Cables, Accessories (Purchased in 2012 Never Used)

1
TestEquity 115 Temperature Chamber, Model: 115, Serial Number: 150896

1
Veeco XRF-5200L X-Ray Measurement System, Model: XRF-5200L, Serial Number: 0169, Includes: Computer/Controller with Software Installed

1
Kulicke & Soffa 648-2 Wire Bonder, Model: 648-2, Serial Number: 153

1
Agilent 86100A infiniium DCA Wide-Bandwidth Oscilloscope with 86105A Optical Filter & OPT 001, Serial Number: US40178113, Module Included: Agilent 86105A Optical Filter with OPT 202 & UK6

1
Hewlett Packard 83482A Optical / Electrical Module with OPT 012 & 83480A, Serial Number: US36360209, Includes: Hewlett Packard 83480A Digital Communications Analyzer with OPT 100 Enhanced Trigger

1
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, Agilent APC-3.5 Scalar, Assorted Connectors/Fittings/Access
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, A...

1
(5 pcs) Narda Plug-ins, Includes: (3) 3020A Bi-Directional Coaxial Coupler, 3000-10 Coaxial Directional Coupler, 3768NM 40 Watt Termination

2
Agilent 86117A 50 GHz Dual Channel Electrical Module CFG001

3
Agilent 86105B 20 GHz Optical Electrical Module 1000-1600 n/m Module OPT. 101

4
Agilent 54754A Differential & Single Ended TDR/TDT Module
Agilent 54754A Differential & Single Ended TDR/TDT Module

5
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300

6
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300

7
Agilent 86106B 28 GHz Optical / 40 GHz Electrical 1000-1600nm Module OPT. 012

8
Agilent 86112A 20 GHz Dual Channel Electrical Module

9
Agilent 8153A Lightwave Multimeter w/ HP81533B & HP 815225A Optical Head

10
Agilent 83494A OPT 103 Single-Mode Clock Recovery Module CF0003
Agilent 83494A OPT 103 Single-mode Clock Recovery Module CF0003

11
Agilent 86112A 20GHz Dual Channel Electrical Module OPT. UK6

12
Agilent 81576A Variable Optical Attenuator Module

13
Agilent 81576A Variable Optical Attenuator Module

14
Agilent 81618A Single Optical Interface Module

15
Agilent 81618A Single Optical Interface Module

16
Agilent 81618A Single Optical Interface Module

17
Agilent 81618A Single Optical Interface Module

18
Agilent 81618A Single Optical Interface Module

19
Agilent 81618A Single Optical Interface Module

20
Agilent 81578A Variable Optical Attenuator Module Option 062

21
Agilent 81578A Variable Optical Attenuator Module Option 062

22
Agilent 81633A Optical Power Sensor Module

23
Agilent 81635A Dual Optical Power Sensor

24
Agilent 8163A Lightwave Multimeter

25
Agilent 86106A 30 GHz Optical / 40 GHz Electrical Module Option 101

26
RSR HY3002-3 DC Power Supply

27
Agilent 8703A Lightwave Component Analyzer

28
DiCon GP700 General Purpose Fiber Optic Switch

29
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System

30
Rack (2) Stanford Research Lock-In Amplifiers & HP 214 Pulse Generator & (2) Eribium Doped Fiber Aplifiers

31
OZ OPTICS Digital Variable Attenuator

32
OZ OPTICS Digital Variable Attenuator

33
OZ OPTICS Digital Variable Attenuator

34
OZ OPTICS Digital Variable Attenuator

35
Omega HH611PL4C K-Thermocuple Logging Thermometer

36
Agilent E3644A DC Power Supply SN/ MY40003537

37
Agilent E3620A Dual Output DC Power Supply

38
Tektronix TDS 3014 SN/ B016156

39
Tektronix TDS 3054B 4 ch 500MHz DPO SN/ B040756

40
Agilent E3640A DC Power Supply SN/ MY40009025

41
Agilent E3640A DC Power Supply SN/ MY40007752

42
Agilent E4404B Spectum Analyzer SN/ US40240804

43
Agilent E8408A VXI Mainframe wE8491B, 89605B, E1439A SN/ MY41000991

44
Maxsys FIFA Switch Box

45
HP 8594E Spec Analyzer SN/ 3733U03347

46
Agilent 8903B Audio Analyzer SN/ 2652A02402
Agilent 8903B Audio Analyzer SN/ 2652A02402

47
HP 8903B Audio Analyzer SN/ 3011A12428

48
Agilent E4418B EPM Series Power Meter SN/ US38470743

49
Agilent E3640A DC Power Supply SN/ MY40011627

50
HP 1141A Differential Probe SN/ US34510696

51
HP 1142A Probe Control and Power Module SN/ US34512018

52
Tektronix P6204 Active Probe SN/ B015060

53
Tektronix TPA-BNC Adapter for Active probe SN/ B010267

54
Agilent E3620A Dual Output DC Power Supply SN/ MY40003605

55
Agilent E3620A Dual Output DC Power Supply SN/ MY40003608

56
HP 4285A Precision LCR Meter SN/ 3041J00767

57
Agilent 16034E Test Fixture MY44100299

58
Agilent 04285-61001 Cal Resistor

59
Fluke 73III Multimeter

60
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

61
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

62
National Instruments SCXI 1000 with 8 channel thermocouple amplifier with cable

63
Tektronix A6302 CURRENT PROBE

64
Tektronix A6302 CURRENT PROBE

65
Tektronix AM503B PROBE AMP WITH FRAME

66
Tektronix AM503B PROBE AMP WITH FRAME

67
Agilent 86105C 9 GHz Optical / 20 GHz Electrical Sampling Module Option 100 140 150 180

68
racks on wheels (quantity 6)

69
HP 6633A Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

70
HP 6633B Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

71
Hewlett Packard 16500A Logic Analysis System, With (1) 16510B 35MHz State Plug Inn

72
Hewlett Packard 16500A Logic Analysis System

73
Hewlett Packard 16500A Logic Analysis System, With (3) Plug Inns 16541A, (1) 16540A, (1) 16515A

74
ANRITSU MD8480C W-CDMA Signalling Tester With (6) Cards: (1) MU848073, (1) MU848072C1, (1) MU848077C, (1) MU848056A, (1) MU848051A, (1) MU848071C, S/N 6200494886

75
ANRITSU MD8480C W-CDMA Signalling Tester With (8) Cards: (1) MU848073C, (2) MU848072C1, (1) MU848072C, (1) MU848060C, (1) MU848051A, (1) MU848071C, (1) MU848056A S/N 6200861115, Opt 03

76
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01682

77
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01679

78
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 1113A03227

79
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A Opt 011, 040, S/N 2228A-01847

80
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A, S/N 2411A-10021

81
Hewlett Packard 5384A Frequency Counter, Opt 001. TCXO, S/N 2730A04500

82
Tektronix Type 454 Oscilloscope

83
Kikusui 4-Slot Power Supply Controller PIA4810

84
kikusui 4-Slot Power Supply Controller PIA4810

85
Coulbourn Instruments Lab Line

86
Agilent 85062B 3.5mm Electronic Calibration Kit, Includes: Agilent 85062-60002 Electronic Calibration Module (1-26.6GHz), Agilent 85097-60002 PC Interface Module, Connecting Cable, AC Adapter

87
Bird Thruline 43 Wattmeter with (4) Wattmeter Elements, Model: 43, Serial Number: 286523, Elements Included: 100E (400-1000MHz/100W), 2500H (2-30MHz/2500W), 500H (2-30MHz/500W), 50H (2-30MHz/50W)

88
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set (52-475-500), Steel Parallel Set (YS900-0030-35)
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set...

89
Hewlett Packard 4275A Multi-Frequency LCR Meter, Serial Number: 2830J05137

90
Newport UltrAlign XYZ-Axis Optical Stage with (3) Newport Micrometers

91
Newport 562 Series XYZ-Axis Optical Stage with (3) Newport Micrometers

97
MARCH Intruments PDX-2400 Plasma Etcher with ENI Power Supply
 PDX-2400 Plasma Etcher with ENI Power Supply

98
FUSION UV SYSTEMS INC Benchtop UV Cure Reflow Oven

199
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace - Gilroy
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace. BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Wide Belt Furnace (480Y/277VAC, 133A, 3Ph, 112kVA, 50/60Hz; max...

200
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum pump - Gilroy
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum Pump. March Instruments PX-1000 Plasma Asher, with an ENI RF Generator & Alcatel ZT2033 Vacuum Pump along with a TC Vacuum...

201
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long) - Gilroy
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long).

202
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off - Gilroy
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off.

203
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw) - Gilroy
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw).

204
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand - Gilroy
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand.

205
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables - Gilroy
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables.

206
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor - Gilroy
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor.

207
Varian DS102 Dual Stage Mechanical Vacuum Pump - Gilroy
Varian DS102 Dual Stage Mechanical Vacuum Pump.

208
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges - Gilroy
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges.

209
ASM A600 UHV-CP Wafer Handler - Gilroy
ASM A600 UHV-CP Wafer Handler. It has two wafer handling robots up front and one in the back. The robot in the back is a Brooks Automation 001-7500-05 and it comes with a Pendant. This machine also...

210
Polytool Kobay SAWIN 300D Dicing Tool - Gilroy
Polytool Kobay SAWIN 300D Dicing Tool.

211
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100 - Gilroy
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100.

212
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope - Gilroy
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope.

213
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck - Gilroy
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck.

214
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160) - Gilroy
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160).

215
Baker 6047100 SS Glove Box (480V) - Gilroy
Baker 6047100 SS Glove Box (480V).

216
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration - Gilroy
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration.

217
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head - Gilroy
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head.

218
Electroplating Engineers EEJA Cu Plater Sink - Gilroy
Electroplating Engineers EEJA Cu Plater Sink.

219
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK.

220
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station - Gilroy
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station.

221
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning - Gilroy
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning.

222
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA). Powers on as shown.

223
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

224
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit - Gilroy
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit. This Oerlikon Leybold TW 250 Turbo Vacuum Pump features an NW100 ISO Flange, and includes a Turbo.Drive 400 (TD400, 800073V0...

225
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables - Gilroy
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables.

226
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control - Gilroy
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control.

227
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

228
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

229
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300 - Gilroy
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300.

230
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690 - Gilroy
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690.

231
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS - Gilroy
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS.

232
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord - Gilroy
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord.

233
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable - Gilroy
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable.

234
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

235
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum - Gilroy
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum.

236
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V) - Gilroy
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V).

237
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA).

238
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube - Gilroy
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube. This ACS-Cryogenics M350CS Vacuum Cryo Pump is mounted to a 6" CF Confat 4-Way Cross Cube, and a McAllister Technical Servic...

239
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001 - Gilroy
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001.

240
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve - Gilroy
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve.

241
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi) - Gilroy
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi).

242
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi) - Gilroy
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi).

243
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin - Gilroy
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin.

244
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001 - Gilroy
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001. Powers on as shown.

245
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041 - Gilroy
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041. Powers on as shown.

246
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B - Gilroy
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B. Powers up as shown.

247
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02 - Gilroy
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02. Standby light comes on but that is all.

248
Newport 6000 Laser Diode Controller w/ 6560A Driver - Gilroy
Newport 6000 Laser Diode Controller w/ 6560A Driver. Powers on as shown.

249
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins - Gilroy
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins. Powers on as shown.

250
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector - Gilroy
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector.

251
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s - Gilroy
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s. Powers on as shown.

252
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards - Gilroy
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards. Powers on as shown.

253
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp - Gilroy
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp. Powers on as shown.

254
Tektronix 2465 4 Channel 300MHz Oscilloscope - Gilroy
Tektronix 2465 4 Channel 300MHz Oscilloscope. Powers on as shown.

255
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope - Gilroy
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope. Powers on as shown.

256
Tektronix 2465A 4 Channel 350MHz Oscilloscope - Gilroy
Tektronix 2465A 4 Channel 350MHz Oscilloscope. Powers on as shown.

257
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max - Gilroy
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max. Powers on as shown.

258
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

259
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W - Gilroy
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W. Powers on as shown.

260
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01 - Gilroy
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01. Five of these cables are the A Revision (184749A-01), the other four are the B Revision (184749B-01).

261
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

262
Tektronix 2445 150 MHz Four Channel Oscilloscope - Gilroy
Tektronix 2445 150 MHz Four Channel Oscilloscope. Powers on as shown.

263
Agilent 6652A System DC Power Supply 0-20V, 0-25A - Gilroy
Agilent 6652A System DC Power Supply 0-20V, 0-25A. Powers on as shown.

264
HP 89440A RF Section w/ Opt. AY8 - Gilroy
HP 89440A RF Section w/ Opt. AY8.

265
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface - Gilroy
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface. Powers on as shown.

266
HP 6274B DC Power Supply 0-60Vdc/0-15A - Gilroy
HP 6274B DC Power Supply 0-60Vdc/0-15A. Powers on as shown.

267
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules - Gilroy
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules. Powers on as shown.

268
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

269
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

270
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000 - Gilroy
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000.

271
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel - Gilroy
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel.

272
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA - Gilroy
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA.

273
Matrix Test Equipment ASX-16B RF Signal Generator - Gilroy
Matrix Test Equipment ASX-16B RF Signal Generator.

274
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply - Gilroy
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply.

275
Chatillon TCM 201 Motorized Force Test Stand Tension Compression - Gilroy
Chatillon TCM 201 Motorized Force Test Stand Tension Compression. Powers on as shown.

276
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand - Gilroy
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand.

277
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz - Gilroy
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz.

278
Branson IPC 7102 Plasma Etcher - Gilroy
Branson IPC 7102 Plasma Etcher. Powers on as shown.

279
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz - Gilroy
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz.

280
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode - Gilroy
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode.

281
ENI Power Systems PL2 Plasmaloc 2 RF Generator - Gilroy
ENI Power Systems PL2 Plasmaloc 2 RF Generator.

282
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter - Gilroy
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter.

283
RF Matching Assembly - Gilroy
RF Matching Assembly.

284
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber - Gilroy
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber.

285
ENI OEM-6AM RF Power Generator OEM6AM1B - Gilroy
ENI OEM-6AM RF Power Generator OEM6AM1B.

286
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

287
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX - Gilroy
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX.

288
ENI OEM-650A Solid State RF Power Generator - Gilroy
ENI OEM-650A Solid State RF Power Generator.

289
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output - Gilroy
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output.

290
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B - Gilroy
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B.

291
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

292
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF - Gilroy
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF.

293
Bruker HyStar Detector & Power Supply - Gilroy
Bruker HyStar Detector & Power Supply,

294
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage - Gilroy
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage.

295
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

296
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

297
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

298
Adept Technology MV-8 PLC Rack w/5-Modules - Gilroy
Adept Technology MV-8 PLC Rack w/5-Modules.

299
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel - Gilroy
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel.

300
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W - Gilroy
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W.

301
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

302
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

303
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes electrical schematics and software as shown. Unfortunat...

304
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

305
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

306
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System - Gilroy
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System. Model: BLU 100 184/6217

307
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine - Gilroy
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine. Model: Uniline 2000.

308
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

309
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

310
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

311
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

NEOPHOTONICS: RF, Digital & Analog Electronic Test Equipment

Equipment Dispositions

Equipment Dispositions


Contact:
Phone: 408-402-2436
Sale Location
San Jose
, CA
Sale Dates and Times
Sale Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.

Listing Details

1
Agilent 86105A 20 GHz Optical / Electrical Module OPT. 202

1
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM - Gilroy
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM. It comes with a NanoScope Dimension 9000M/9300M Microscope Controller, Power Controller, Dimension 9000 Facilities T...

1
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400 - Gilroy
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400. Powers up as shown. It comes with everything shown, including an XLS-100 Head, a Wafer Standard (250Å SiO2 on Silicon...

1
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy

1
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox - Gilroy
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox. Powers up as shown. The glovebox measures about 7 feet long, has four gloves installed, and it has an Antechamber attached to the right...

1
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot - Gilroy
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot. Features a Genmark robot and prealigner, along with an Olympus MX80-F Wafer Inspection Microscope with 5X, 10X Objectives.

1
Vitronics Soltec XPM520 Reflow Oven (20"Wide Belt) KIC Thermal Profiling - Gilroy

1
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder - Gilroy
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder. It does appear to be missing the computer, and there are some loose cables on the back, so I am not sure what else is m...

1
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer - Gilroy
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer. Powers up as shown. One of the monitors does not power on.

1
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber - Gilroy
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber. Powers on as shown.

1
Thermotron S-16 Mini-Max Environmental Chamber (460VAC, 3Ph) - Gilroy

1
Plasma-Etch PE-100 Plasma System, Model: PE-100, Serial Number: 081612, Includes: Laptop Controller, Edwards XDS10 Dry Scroll Pump, Connecting Cables, Accessories (Purchased in 2012 Never Used)

1
TestEquity 115 Temperature Chamber, Model: 115, Serial Number: 150896

1
Veeco XRF-5200L X-Ray Measurement System, Model: XRF-5200L, Serial Number: 0169, Includes: Computer/Controller with Software Installed

1
Kulicke & Soffa 648-2 Wire Bonder, Model: 648-2, Serial Number: 153

1
Agilent 86100A infiniium DCA Wide-Bandwidth Oscilloscope with 86105A Optical Filter & OPT 001, Serial Number: US40178113, Module Included: Agilent 86105A Optical Filter with OPT 202 & UK6

1
Hewlett Packard 83482A Optical / Electrical Module with OPT 012 & 83480A, Serial Number: US36360209, Includes: Hewlett Packard 83480A Digital Communications Analyzer with OPT 100 Enhanced Trigger

1
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, Agilent APC-3.5 Scalar, Assorted Connectors/Fittings/Access
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, A...

1
(5 pcs) Narda Plug-ins, Includes: (3) 3020A Bi-Directional Coaxial Coupler, 3000-10 Coaxial Directional Coupler, 3768NM 40 Watt Termination

2
Agilent 86117A 50 GHz Dual Channel Electrical Module CFG001

3
Agilent 86105B 20 GHz Optical Electrical Module 1000-1600 n/m Module OPT. 101

4
Agilent 54754A Differential & Single Ended TDR/TDT Module
Agilent 54754A Differential & Single Ended TDR/TDT Module

5
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300

6
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300

7
Agilent 86106B 28 GHz Optical / 40 GHz Electrical 1000-1600nm Module OPT. 012

8
Agilent 86112A 20 GHz Dual Channel Electrical Module

9
Agilent 8153A Lightwave Multimeter w/ HP81533B & HP 815225A Optical Head

10
Agilent 83494A OPT 103 Single-Mode Clock Recovery Module CF0003
Agilent 83494A OPT 103 Single-mode Clock Recovery Module CF0003

11
Agilent 86112A 20GHz Dual Channel Electrical Module OPT. UK6

12
Agilent 81576A Variable Optical Attenuator Module

13
Agilent 81576A Variable Optical Attenuator Module

14
Agilent 81618A Single Optical Interface Module

15
Agilent 81618A Single Optical Interface Module

16
Agilent 81618A Single Optical Interface Module

17
Agilent 81618A Single Optical Interface Module

18
Agilent 81618A Single Optical Interface Module

19
Agilent 81618A Single Optical Interface Module

20
Agilent 81578A Variable Optical Attenuator Module Option 062

21
Agilent 81578A Variable Optical Attenuator Module Option 062

22
Agilent 81633A Optical Power Sensor Module

23
Agilent 81635A Dual Optical Power Sensor

24
Agilent 8163A Lightwave Multimeter

25
Agilent 86106A 30 GHz Optical / 40 GHz Electrical Module Option 101

26
RSR HY3002-3 DC Power Supply

27
Agilent 8703A Lightwave Component Analyzer

28
DiCon GP700 General Purpose Fiber Optic Switch

29
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System

30
Rack (2) Stanford Research Lock-In Amplifiers & HP 214 Pulse Generator & (2) Eribium Doped Fiber Aplifiers

31
OZ OPTICS Digital Variable Attenuator

32
OZ OPTICS Digital Variable Attenuator

33
OZ OPTICS Digital Variable Attenuator

34
OZ OPTICS Digital Variable Attenuator

35
Omega HH611PL4C K-Thermocuple Logging Thermometer

36
Agilent E3644A DC Power Supply SN/ MY40003537

37
Agilent E3620A Dual Output DC Power Supply

38
Tektronix TDS 3014 SN/ B016156

39
Tektronix TDS 3054B 4 ch 500MHz DPO SN/ B040756

40
Agilent E3640A DC Power Supply SN/ MY40009025

41
Agilent E3640A DC Power Supply SN/ MY40007752

42
Agilent E4404B Spectum Analyzer SN/ US40240804

43
Agilent E8408A VXI Mainframe wE8491B, 89605B, E1439A SN/ MY41000991

44
Maxsys FIFA Switch Box

45
HP 8594E Spec Analyzer SN/ 3733U03347

46
Agilent 8903B Audio Analyzer SN/ 2652A02402
Agilent 8903B Audio Analyzer SN/ 2652A02402

47
HP 8903B Audio Analyzer SN/ 3011A12428

48
Agilent E4418B EPM Series Power Meter SN/ US38470743

49
Agilent E3640A DC Power Supply SN/ MY40011627

50
HP 1141A Differential Probe SN/ US34510696

51
HP 1142A Probe Control and Power Module SN/ US34512018

52
Tektronix P6204 Active Probe SN/ B015060

53
Tektronix TPA-BNC Adapter for Active probe SN/ B010267

54
Agilent E3620A Dual Output DC Power Supply SN/ MY40003605

55
Agilent E3620A Dual Output DC Power Supply SN/ MY40003608

56
HP 4285A Precision LCR Meter SN/ 3041J00767

57
Agilent 16034E Test Fixture MY44100299

58
Agilent 04285-61001 Cal Resistor

59
Fluke 73III Multimeter

60
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

61
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

62
National Instruments SCXI 1000 with 8 channel thermocouple amplifier with cable

63
Tektronix A6302 CURRENT PROBE

64
Tektronix A6302 CURRENT PROBE

65
Tektronix AM503B PROBE AMP WITH FRAME

66
Tektronix AM503B PROBE AMP WITH FRAME

67
Agilent 86105C 9 GHz Optical / 20 GHz Electrical Sampling Module Option 100 140 150 180

68
racks on wheels (quantity 6)

69
HP 6633A Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

70
HP 6633B Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

71
Hewlett Packard 16500A Logic Analysis System, With (1) 16510B 35MHz State Plug Inn

72
Hewlett Packard 16500A Logic Analysis System

73
Hewlett Packard 16500A Logic Analysis System, With (3) Plug Inns 16541A, (1) 16540A, (1) 16515A

74
ANRITSU MD8480C W-CDMA Signalling Tester With (6) Cards: (1) MU848073, (1) MU848072C1, (1) MU848077C, (1) MU848056A, (1) MU848051A, (1) MU848071C, S/N 6200494886

75
ANRITSU MD8480C W-CDMA Signalling Tester With (8) Cards: (1) MU848073C, (2) MU848072C1, (1) MU848072C, (1) MU848060C, (1) MU848051A, (1) MU848071C, (1) MU848056A S/N 6200861115, Opt 03

76
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01682

77
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01679

78
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 1113A03227

79
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A Opt 011, 040, S/N 2228A-01847

80
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A, S/N 2411A-10021

81
Hewlett Packard 5384A Frequency Counter, Opt 001. TCXO, S/N 2730A04500

82
Tektronix Type 454 Oscilloscope

83
Kikusui 4-Slot Power Supply Controller PIA4810

84
kikusui 4-Slot Power Supply Controller PIA4810

85
Coulbourn Instruments Lab Line

86
Agilent 85062B 3.5mm Electronic Calibration Kit, Includes: Agilent 85062-60002 Electronic Calibration Module (1-26.6GHz), Agilent 85097-60002 PC Interface Module, Connecting Cable, AC Adapter

87
Bird Thruline 43 Wattmeter with (4) Wattmeter Elements, Model: 43, Serial Number: 286523, Elements Included: 100E (400-1000MHz/100W), 2500H (2-30MHz/2500W), 500H (2-30MHz/500W), 50H (2-30MHz/50W)

88
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set (52-475-500), Steel Parallel Set (YS900-0030-35)
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set...

89
Hewlett Packard 4275A Multi-Frequency LCR Meter, Serial Number: 2830J05137

90
Newport UltrAlign XYZ-Axis Optical Stage with (3) Newport Micrometers

91
Newport 562 Series XYZ-Axis Optical Stage with (3) Newport Micrometers

97
MARCH Intruments PDX-2400 Plasma Etcher with ENI Power Supply
 PDX-2400 Plasma Etcher with ENI Power Supply

98
FUSION UV SYSTEMS INC Benchtop UV Cure Reflow Oven

199
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace - Gilroy
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace. BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Wide Belt Furnace (480Y/277VAC, 133A, 3Ph, 112kVA, 50/60Hz; max...

200
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum pump - Gilroy
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum Pump. March Instruments PX-1000 Plasma Asher, with an ENI RF Generator & Alcatel ZT2033 Vacuum Pump along with a TC Vacuum...

201
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long) - Gilroy
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long).

202
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off - Gilroy
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off.

203
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw) - Gilroy
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw).

204
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand - Gilroy
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand.

205
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables - Gilroy
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables.

206
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor - Gilroy
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor.

207
Varian DS102 Dual Stage Mechanical Vacuum Pump - Gilroy
Varian DS102 Dual Stage Mechanical Vacuum Pump.

208
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges - Gilroy
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges.

209
ASM A600 UHV-CP Wafer Handler - Gilroy
ASM A600 UHV-CP Wafer Handler. It has two wafer handling robots up front and one in the back. The robot in the back is a Brooks Automation 001-7500-05 and it comes with a Pendant. This machine also...

210
Polytool Kobay SAWIN 300D Dicing Tool - Gilroy
Polytool Kobay SAWIN 300D Dicing Tool.

211
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100 - Gilroy
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100.

212
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope - Gilroy
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope.

213
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck - Gilroy
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck.

214
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160) - Gilroy
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160).

215
Baker 6047100 SS Glove Box (480V) - Gilroy
Baker 6047100 SS Glove Box (480V).

216
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration - Gilroy
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration.

217
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head - Gilroy
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head.

218
Electroplating Engineers EEJA Cu Plater Sink - Gilroy
Electroplating Engineers EEJA Cu Plater Sink.

219
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK.

220
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station - Gilroy
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station.

221
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning - Gilroy
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning.

222
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA). Powers on as shown.

223
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

224
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit - Gilroy
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit. This Oerlikon Leybold TW 250 Turbo Vacuum Pump features an NW100 ISO Flange, and includes a Turbo.Drive 400 (TD400, 800073V0...

225
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables - Gilroy
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables.

226
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control - Gilroy
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control.

227
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

228
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

229
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300 - Gilroy
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300.

230
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690 - Gilroy
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690.

231
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS - Gilroy
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS.

232
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord - Gilroy
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord.

233
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable - Gilroy
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable.

234
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

235
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum - Gilroy
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum.

236
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V) - Gilroy
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V).

237
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA).

238
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube - Gilroy
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube. This ACS-Cryogenics M350CS Vacuum Cryo Pump is mounted to a 6" CF Confat 4-Way Cross Cube, and a McAllister Technical Servic...

239
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001 - Gilroy
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001.

240
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve - Gilroy
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve.

241
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi) - Gilroy
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi).

242
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi) - Gilroy
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi).

243
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin - Gilroy
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin.

244
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001 - Gilroy
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001. Powers on as shown.

245
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041 - Gilroy
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041. Powers on as shown.

246
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B - Gilroy
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B. Powers up as shown.

247
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02 - Gilroy
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02. Standby light comes on but that is all.

248
Newport 6000 Laser Diode Controller w/ 6560A Driver - Gilroy
Newport 6000 Laser Diode Controller w/ 6560A Driver. Powers on as shown.

249
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins - Gilroy
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins. Powers on as shown.

250
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector - Gilroy
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector.

251
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s - Gilroy
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s. Powers on as shown.

252
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards - Gilroy
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards. Powers on as shown.

253
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp - Gilroy
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp. Powers on as shown.

254
Tektronix 2465 4 Channel 300MHz Oscilloscope - Gilroy
Tektronix 2465 4 Channel 300MHz Oscilloscope. Powers on as shown.

255
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope - Gilroy
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope. Powers on as shown.

256
Tektronix 2465A 4 Channel 350MHz Oscilloscope - Gilroy
Tektronix 2465A 4 Channel 350MHz Oscilloscope. Powers on as shown.

257
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max - Gilroy
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max. Powers on as shown.

258
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

259
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W - Gilroy
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W. Powers on as shown.

260
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01 - Gilroy
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01. Five of these cables are the A Revision (184749A-01), the other four are the B Revision (184749B-01).

261
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

262
Tektronix 2445 150 MHz Four Channel Oscilloscope - Gilroy
Tektronix 2445 150 MHz Four Channel Oscilloscope. Powers on as shown.

263
Agilent 6652A System DC Power Supply 0-20V, 0-25A - Gilroy
Agilent 6652A System DC Power Supply 0-20V, 0-25A. Powers on as shown.

264
HP 89440A RF Section w/ Opt. AY8 - Gilroy
HP 89440A RF Section w/ Opt. AY8.

265
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface - Gilroy
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface. Powers on as shown.

266
HP 6274B DC Power Supply 0-60Vdc/0-15A - Gilroy
HP 6274B DC Power Supply 0-60Vdc/0-15A. Powers on as shown.

267
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules - Gilroy
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules. Powers on as shown.

268
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

269
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

270
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000 - Gilroy
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000.

271
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel - Gilroy
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel.

272
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA - Gilroy
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA.

273
Matrix Test Equipment ASX-16B RF Signal Generator - Gilroy
Matrix Test Equipment ASX-16B RF Signal Generator.

274
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply - Gilroy
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply.

275
Chatillon TCM 201 Motorized Force Test Stand Tension Compression - Gilroy
Chatillon TCM 201 Motorized Force Test Stand Tension Compression. Powers on as shown.

276
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand - Gilroy
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand.

277
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz - Gilroy
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz.

278
Branson IPC 7102 Plasma Etcher - Gilroy
Branson IPC 7102 Plasma Etcher. Powers on as shown.

279
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz - Gilroy
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz.

280
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode - Gilroy
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode.

281
ENI Power Systems PL2 Plasmaloc 2 RF Generator - Gilroy
ENI Power Systems PL2 Plasmaloc 2 RF Generator.

282
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter - Gilroy
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter.

283
RF Matching Assembly - Gilroy
RF Matching Assembly.

284
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber - Gilroy
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber.

285
ENI OEM-6AM RF Power Generator OEM6AM1B - Gilroy
ENI OEM-6AM RF Power Generator OEM6AM1B.

286
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

287
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX - Gilroy
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX.

288
ENI OEM-650A Solid State RF Power Generator - Gilroy
ENI OEM-650A Solid State RF Power Generator.

289
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output - Gilroy
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output.

290
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B - Gilroy
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B.

291
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

292
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF - Gilroy
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF.

293
Bruker HyStar Detector & Power Supply - Gilroy
Bruker HyStar Detector & Power Supply,

294
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage - Gilroy
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage.

295
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

296
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

297
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

298
Adept Technology MV-8 PLC Rack w/5-Modules - Gilroy
Adept Technology MV-8 PLC Rack w/5-Modules.

299
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel - Gilroy
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel.

300
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W - Gilroy
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W.

301
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

302
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

303
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes electrical schematics and software as shown. Unfortunat...

304
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

305
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

306
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System - Gilroy
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System. Model: BLU 100 184/6217

307
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine - Gilroy
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine. Model: Uniline 2000.

308
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

309
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

310
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

311
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
NEOPHOTONICS: RF, Digital & Analog Electronic Test Equipment
 Online Only Auction
Sale Date(s)
Bidding Starts: Wednesday Mar 11 , 08:00 AM
Bidding Ends: Tuesday Mar 17 , 01:00 PM
Sale Location

, CA
Listing Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


1
Agilent 86105A 20 GHz Optical / Electrical Module OPT. 202

1
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM - Gilroy
Digital Instruments Veeco Dimension 9000M Atomic Force Microscope AFM. It comes with a NanoScope Dimension 9000M/9300M Microscope Controller, Power Controller, Dimension 9000 Facilities T...

1
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400 - Gilroy
J.A. Woollam M-2000UI Spectroscopic Ellipsometer w/ XLS-100 Head, EC-400. Powers up as shown. It comes with everything shown, including an XLS-100 Head, a Wafer Standard (250Å SiO2 on Silicon...

1
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy
K&S Kulicke & Soffa 7100 Wafer Dicing Saw 7100ad w/ 6" Vacuum Chuck - Gilroy

1
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox - Gilroy
Vacuum Atmospheres VAC HE-553-2 Double Wide Dri-Lab Glovebox. Powers up as shown. The glovebox measures about 7 feet long, has four gloves installed, and it has an Antechamber attached to the right...

1
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot - Gilroy
Applied Precision WaferWoRx Olympus MX80-F Inspection with Genmark Robot. Features a Genmark robot and prealigner, along with an Olympus MX80-F Wafer Inspection Microscope with 5X, 10X Objectives.

1
Vitronics Soltec XPM520 Reflow Oven (20"Wide Belt) KIC Thermal Profiling - Gilroy

1
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder - Gilroy
Benchmark Gen II Generation 2 Atmospheric Enclosure Seam Sealer & Welder. It does appear to be missing the computer, and there are some loose cables on the back, so I am not sure what else is m...

1
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer - Gilroy
MPM SPM Manually Loaded Stand Alone Screen / Stencil Printer. Powers up as shown. One of the monitors does not power on.

1
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber - Gilroy
Thermotron SM-32S Mini-Max Environmental Temperature / Humidity Chamber. Powers on as shown.

1
Thermotron S-16 Mini-Max Environmental Chamber (460VAC, 3Ph) - Gilroy

1
Plasma-Etch PE-100 Plasma System, Model: PE-100, Serial Number: 081612, Includes: Laptop Controller, Edwards XDS10 Dry Scroll Pump, Connecting Cables, Accessories (Purchased in 2012 Never Used)

1
TestEquity 115 Temperature Chamber, Model: 115, Serial Number: 150896

1
Veeco XRF-5200L X-Ray Measurement System, Model: XRF-5200L, Serial Number: 0169, Includes: Computer/Controller with Software Installed

1
Kulicke & Soffa 648-2 Wire Bonder, Model: 648-2, Serial Number: 153

1
Agilent 86100A infiniium DCA Wide-Bandwidth Oscilloscope with 86105A Optical Filter & OPT 001, Serial Number: US40178113, Module Included: Agilent 86105A Optical Filter with OPT 202 & UK6

1
Hewlett Packard 83482A Optical / Electrical Module with OPT 012 & 83480A, Serial Number: US36360209, Includes: Hewlett Packard 83480A Digital Communications Analyzer with OPT 100 Enhanced Trigger

1
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, Agilent APC-3.5 Scalar, Assorted Connectors/Fittings/Access
(6+ pcs) Hewlett Packard & Agilent Plug-ins & Accessories, Includes: HP R8486D Power Sensor, HPR8486A Power Sensor, HP R347B Noise Source, HP 8495B Attenuator, HP 11692D Dual Directional Coupler, A...

1
(5 pcs) Narda Plug-ins, Includes: (3) 3020A Bi-Directional Coaxial Coupler, 3000-10 Coaxial Directional Coupler, 3768NM 40 Watt Termination

2
Agilent 86117A 50 GHz Dual Channel Electrical Module CFG001

3
Agilent 86105B 20 GHz Optical Electrical Module 1000-1600 n/m Module OPT. 101

4
Agilent 54754A Differential & Single Ended TDR/TDT Module
Agilent 54754A Differential & Single Ended TDR/TDT Module

5
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300
Agilent 86105C 750-1650nm Module Options 140 150 160 180 300

6
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300
Agilent 86105C 750-1650nm Module Options 140 160 180 190 300

7
Agilent 86106B 28 GHz Optical / 40 GHz Electrical 1000-1600nm Module OPT. 012

8
Agilent 86112A 20 GHz Dual Channel Electrical Module

9
Agilent 8153A Lightwave Multimeter w/ HP81533B & HP 815225A Optical Head

10
Agilent 83494A OPT 103 Single-Mode Clock Recovery Module CF0003
Agilent 83494A OPT 103 Single-mode Clock Recovery Module CF0003

11
Agilent 86112A 20GHz Dual Channel Electrical Module OPT. UK6

12
Agilent 81576A Variable Optical Attenuator Module

13
Agilent 81576A Variable Optical Attenuator Module

14
Agilent 81618A Single Optical Interface Module

15
Agilent 81618A Single Optical Interface Module

16
Agilent 81618A Single Optical Interface Module

17
Agilent 81618A Single Optical Interface Module

18
Agilent 81618A Single Optical Interface Module

19
Agilent 81618A Single Optical Interface Module

20
Agilent 81578A Variable Optical Attenuator Module Option 062

21
Agilent 81578A Variable Optical Attenuator Module Option 062

22
Agilent 81633A Optical Power Sensor Module

23
Agilent 81635A Dual Optical Power Sensor

24
Agilent 8163A Lightwave Multimeter

25
Agilent 86106A 30 GHz Optical / 40 GHz Electrical Module Option 101

26
RSR HY3002-3 DC Power Supply

27
Agilent 8703A Lightwave Component Analyzer

28
DiCon GP700 General Purpose Fiber Optic Switch

29
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System
Test Rack w Agilent 34401A Multimeter & HP 6634A 0-100V/0-1A System DC Power Supply & Racal Test System

30
Rack (2) Stanford Research Lock-In Amplifiers & HP 214 Pulse Generator & (2) Eribium Doped Fiber Aplifiers

31
OZ OPTICS Digital Variable Attenuator

32
OZ OPTICS Digital Variable Attenuator

33
OZ OPTICS Digital Variable Attenuator

34
OZ OPTICS Digital Variable Attenuator

35
Omega HH611PL4C K-Thermocuple Logging Thermometer

36
Agilent E3644A DC Power Supply SN/ MY40003537

37
Agilent E3620A Dual Output DC Power Supply

38
Tektronix TDS 3014 SN/ B016156

39
Tektronix TDS 3054B 4 ch 500MHz DPO SN/ B040756

40
Agilent E3640A DC Power Supply SN/ MY40009025

41
Agilent E3640A DC Power Supply SN/ MY40007752

42
Agilent E4404B Spectum Analyzer SN/ US40240804

43
Agilent E8408A VXI Mainframe wE8491B, 89605B, E1439A SN/ MY41000991

44
Maxsys FIFA Switch Box

45
HP 8594E Spec Analyzer SN/ 3733U03347

46
Agilent 8903B Audio Analyzer SN/ 2652A02402
Agilent 8903B Audio Analyzer SN/ 2652A02402

47
HP 8903B Audio Analyzer SN/ 3011A12428

48
Agilent E4418B EPM Series Power Meter SN/ US38470743

49
Agilent E3640A DC Power Supply SN/ MY40011627

50
HP 1141A Differential Probe SN/ US34510696

51
HP 1142A Probe Control and Power Module SN/ US34512018

52
Tektronix P6204 Active Probe SN/ B015060

53
Tektronix TPA-BNC Adapter for Active probe SN/ B010267

54
Agilent E3620A Dual Output DC Power Supply SN/ MY40003605

55
Agilent E3620A Dual Output DC Power Supply SN/ MY40003608

56
HP 4285A Precision LCR Meter SN/ 3041J00767

57
Agilent 16034E Test Fixture MY44100299

58
Agilent 04285-61001 Cal Resistor

59
Fluke 73III Multimeter

60
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

61
Agilent E4433B ESG-D Series Digital RF Signal Generator, 250 kHz to 4 GHz

62
National Instruments SCXI 1000 with 8 channel thermocouple amplifier with cable

63
Tektronix A6302 CURRENT PROBE

64
Tektronix A6302 CURRENT PROBE

65
Tektronix AM503B PROBE AMP WITH FRAME

66
Tektronix AM503B PROBE AMP WITH FRAME

67
Agilent 86105C 9 GHz Optical / 20 GHz Electrical Sampling Module Option 100 140 150 180

68
racks on wheels (quantity 6)

69
HP 6633A Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

70
HP 6633B Keysight/Agilent 6633A Power Supply, 50V, 2A, 100W

71
Hewlett Packard 16500A Logic Analysis System, With (1) 16510B 35MHz State Plug Inn

72
Hewlett Packard 16500A Logic Analysis System

73
Hewlett Packard 16500A Logic Analysis System, With (3) Plug Inns 16541A, (1) 16540A, (1) 16515A

74
ANRITSU MD8480C W-CDMA Signalling Tester With (6) Cards: (1) MU848073, (1) MU848072C1, (1) MU848077C, (1) MU848056A, (1) MU848051A, (1) MU848071C, S/N 6200494886

75
ANRITSU MD8480C W-CDMA Signalling Tester With (8) Cards: (1) MU848073C, (2) MU848072C1, (1) MU848072C, (1) MU848060C, (1) MU848051A, (1) MU848071C, (1) MU848056A S/N 6200861115, Opt 03

76
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01682

77
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 0636A01679

78
Sorensen DLM 5-75 Power supply Model DLM5-75M9G, S/N 1113A03227

79
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A Opt 011, 040, S/N 2228A-01847

80
Hewlett Packard 6205C Dual DC power Supply 0-40v, .3A / 0-20v, .6A, S/N 2411A-10021

81
Hewlett Packard 5384A Frequency Counter, Opt 001. TCXO, S/N 2730A04500

82
Tektronix Type 454 Oscilloscope

83
Kikusui 4-Slot Power Supply Controller PIA4810

84
kikusui 4-Slot Power Supply Controller PIA4810

85
Coulbourn Instruments Lab Line

86
Agilent 85062B 3.5mm Electronic Calibration Kit, Includes: Agilent 85062-60002 Electronic Calibration Module (1-26.6GHz), Agilent 85097-60002 PC Interface Module, Connecting Cable, AC Adapter

87
Bird Thruline 43 Wattmeter with (4) Wattmeter Elements, Model: 43, Serial Number: 286523, Elements Included: 100E (400-1000MHz/100W), 2500H (2-30MHz/2500W), 500H (2-30MHz/500W), 50H (2-30MHz/50W)

88
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set (52-475-500), Steel Parallel Set (YS900-0030-35)
(6 pcs) Assorted Test & Lab Equipment, Includes: Extech 480400 Phase Sequence Tester, MTI 104 Thermo-Probe, Gaoyue 858D SMD Rework Station, Omega RH411 Digital Thermo-Hygrometer, Fowler V-Block Set...

89
Hewlett Packard 4275A Multi-Frequency LCR Meter, Serial Number: 2830J05137

90
Newport UltrAlign XYZ-Axis Optical Stage with (3) Newport Micrometers

91
Newport 562 Series XYZ-Axis Optical Stage with (3) Newport Micrometers

97
MARCH Intruments PDX-2400 Plasma Etcher with ENI Power Supply
 PDX-2400 Plasma Etcher with ENI Power Supply

98
FUSION UV SYSTEMS INC Benchtop UV Cure Reflow Oven

199
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace - Gilroy
BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Belt Furnace. BTU International PYRAMAX 150N Z12 Nitrogen Reflow Oven 18" Wide Belt Furnace (480Y/277VAC, 133A, 3Ph, 112kVA, 50/60Hz; max...

200
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum pump - Gilroy
March Instruments PX-1000 Plasma Asher w/ENI RF Generator & Alcatel Vacuum Pump. March Instruments PX-1000 Plasma Asher, with an ENI RF Generator & Alcatel ZT2033 Vacuum Pump along with a TC Vacuum...

201
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long) - Gilroy
Conflat 10" CF Full Nipple Vacuum Flange Union Rigid Hose (8" Long).

202
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off - Gilroy
MDC Vacuum Products 13.25" 13-1/4" CF Conflat Vacuum Flange Blank Off.

203
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw) - Gilroy
Federal-Mogul Westwind 4" Air Bearing Spindle Motor (K&S 775 Dicing Saw).

204
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand - Gilroy
Nikon Trinocular Microscope w/ Technical Instrument Co. Focusing Stand.

205
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables - Gilroy
Daihen DAUMA-10P RF Match Matching Network w/ DCNT-E2 Controller, Cables.

206
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor - Gilroy
Agilent DS302 Dual Stage Mechanical Vacuum Pump w/ 0.37/0.45kW Motor.

207
Varian DS102 Dual Stage Mechanical Vacuum Pump - Gilroy
Varian DS102 Dual Stage Mechanical Vacuum Pump.

208
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges - Gilroy
A&N Conflat Vacuum Flange 4-Way Cross Tube (2) 6" (2) 2.75" CF Flanges.

209
ASM A600 UHV-CP Wafer Handler - Gilroy
ASM A600 UHV-CP Wafer Handler. It has two wafer handling robots up front and one in the back. The robot in the back is a Brooks Automation 001-7500-05 and it comes with a Pendant. This machine also...

210
Polytool Kobay SAWIN 300D Dicing Tool - Gilroy
Polytool Kobay SAWIN 300D Dicing Tool.

211
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100 - Gilroy
Bruker AXS X8 PROTEUM PT135 X-Ray Diffractometer Assembly P/N 843-017100.

212
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope - Gilroy
Esec 3006 F/X Type W-115 Wire Bonder w/ Olympus SZ30 Microscope.

213
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck - Gilroy
 Signatone CM170-6 CheckMate Wafer Prober Probe Station with 6 inch Chuck.

214
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160) - Gilroy
Tencor P-10 / P-11 Surface Profiler Wafer Profilometer (m/n 239160).

215
Baker 6047100 SS Glove Box (480V) - Gilroy
Baker 6047100 SS Glove Box (480V).

216
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration - Gilroy
Brooks Polycold 2XCL Closed Loop Gas Chiller Cryogenic Refrigeration.

217
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head - Gilroy
Park Scientific Autoprobe XL Scanning Microscope w/ 100µm Scan Head.

218
Electroplating Engineers EEJA Cu Plater Sink - Gilroy
Electroplating Engineers EEJA Cu Plater Sink.

219
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK.

220
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station - Gilroy
Modutek 72-FH-PVC-C Wet Bench Wafer Processing Wash Station.

221
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning - Gilroy
NSW Automation A-316 Saber VI Inspection System, XYZ Linear Positioning.

222
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA). Powers on as shown.

223
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Agilent TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

224
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit - Gilroy
Oerlikon Leybold TW 250 Vacuum Pump, Turbo Drive 400 TD400 Control Unit. This Oerlikon Leybold TW 250 Turbo Vacuum Pump features an NW100 ISO Flange, and includes a Turbo.Drive 400 (TD400, 800073V0...

225
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables - Gilroy
Osaka Vacuum TG370MV-02B Turbo Pump w/ TD370/400 Power Supply & Cables.

226
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control - Gilroy
Oerlikon Leybold Turbovac TW 220/150 S Turbo Vacuum Pump, TD300 Control.

227
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

228
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control - Gilroy
Leybold TW 701 Turbovac Vacuum Pump TW701, Turbo.Drive 700 TD700 Control.

229
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300 - Gilroy
Leybold TW250 Turbo Pump w/ Turbo.Drive 300 Controller TD300.

230
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690 - Gilroy
Oerlikon Leybold TW 690 MS Turbovac Turbo Vacuum Pump w/ Turbo.Drive 690.

231
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS - Gilroy
Leybold Turbovac TW 690MS Turbo Vacuum Pump NW160 w/ Turbo.Drive 690 MS.

232
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord - Gilroy
Osaka Vacuum TD370/400 Turbo Pump Power Supply, Remote Cable, Power Cord.

233
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable - Gilroy
Osaka TD250H Turbo Vacuum Pump (8" CF) w/ Controller, Interconnect Cable.

234
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control - Gilroy
Varian TV551 NAV Turbo-V 551 Navigator Turbo Vacuum Pump, TV550 Control. Powers up as shown.

235
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum - Gilroy
Varian TV551 NAV Navigator Turbo Pump TV 551 Turbomolecular Vacuum.

236
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V) - Gilroy
CTI-Cryogenics Turbo Vacuum Pump Power Supply Control Unit (Turbo-V).

237
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA) - Gilroy
Pfeiffer Balzers TCP120 Turbo Vacuum Pump Controller (100/240VAC, 150VA).

238
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube - Gilroy
ACS-Cryogenics M350CS Vacuum Cryo Pump w/ 6" CF Confat 4-Way Cross Cube. This ACS-Cryogenics M350CS Vacuum Cryo Pump is mounted to a 6" CF Confat 4-Way Cross Cube, and a McAllister Technical Servic...

239
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001 - Gilroy
CTI-Cryogenics On-Board 8F Cryopump w/ 6" CF Conflat Flange 8116071G001.

240
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve - Gilroy
CTI-Cryogenics On-Board Waterpump 8120803G011 w/ Pneumatic Gate Valve.

241
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi) - Gilroy
Lot 2 CTI-Cryogenics 20ft. Cryo Hoses (8043074G240 / 015-13 NTB, 260psi).

242
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi) - Gilroy
Lot 2 CTI-Cryogenics 10ft. Cryo Hoses (8043074 177/97 L G120 260psi).

243
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin - Gilroy
CTI-Cryogenics 8112463G500 On-Board Cryo Pump Power Cable, 50ft, 10-Pin.

244
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001 - Gilroy
Concoa IntelliSwitch 539 Universal Gas Management System 5393002-20-001. Powers on as shown.

245
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041 - Gilroy
HP 8591E Spectrum Analyzer 9kHz-1.8GHz w/ Opt 041. Powers on as shown.

246
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B - Gilroy
Agilent E8408A VXI Mainframe Opt 001 w/ E8491B, E2731A, E1439A, 89605B. Powers up as shown.

247
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02 - Gilroy
Rohde & Schwarz CMU200 Universal Radio Communication Tester 1100.0008.02. Standby light comes on but that is all.

248
Newport 6000 Laser Diode Controller w/ 6560A Driver - Gilroy
Newport 6000 Laser Diode Controller w/ 6560A Driver. Powers on as shown.

249
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins - Gilroy
HP 70004A Display w/ Two 70611A Switch Attenuator Driver Plug-ins. Powers on as shown.

250
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector - Gilroy
HP Agilent 2.4mm Male x Female Bulkhead Adapter Connector.

251
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s - Gilroy
Tektronix TDS540B 4 Channel Digitizing Oscilloscope 500MHz 2GSa/s. Powers on as shown.

252
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards - Gilroy
HP 16500C Logic Analysis System w/ 16534A, 16550A, & (2) 16555A Cards. Powers on as shown.

253
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp - Gilroy
LeCroy 9384TM 1GHz 4-Ch Oscilloscope Single 4GS/s 2Mpt, Quad 1GS/s 500Kp. Powers on as shown.

254
Tektronix 2465 4 Channel 300MHz Oscilloscope - Gilroy
Tektronix 2465 4 Channel 300MHz Oscilloscope. Powers on as shown.

255
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope - Gilroy
Agilent 54624A 100 MHz 200 MSa/s Four Channel Oscilloscope. Powers on as shown.

256
Tektronix 2465A 4 Channel 350MHz Oscilloscope - Gilroy
Tektronix 2465A 4 Channel 350MHz Oscilloscope. Powers on as shown.

257
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max - Gilroy
Kepco KLP-75-33-1200 DC Power Supply 0-75V, 0-33A, 1200W Max. Powers on as shown.

258
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

259
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W - Gilroy
Kepco KLP 75-33-1200 DC Power Supply 0-75Vdc/0-33A 1200W. Powers on as shown.

260
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01 - Gilroy
Lot 9 National Instruments 1 Meter Cables SH68-68-EP 184749-01. Five of these cables are the A Revision (184749A-01), the other four are the B Revision (184749B-01).

261
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581 - Gilroy
Agilent E7087-66201 Power Supply Transistor Devices 09004-135823 SPS5581.

262
Tektronix 2445 150 MHz Four Channel Oscilloscope - Gilroy
Tektronix 2445 150 MHz Four Channel Oscilloscope. Powers on as shown.

263
Agilent 6652A System DC Power Supply 0-20V, 0-25A - Gilroy
Agilent 6652A System DC Power Supply 0-20V, 0-25A. Powers on as shown.

264
HP 89440A RF Section w/ Opt. AY8 - Gilroy
HP 89440A RF Section w/ Opt. AY8.

265
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface - Gilroy
HP 54602B 150MHz 4-Ch Oscilloscope w/ 54650A HP-IB Interface. Powers on as shown.

266
HP 6274B DC Power Supply 0-60Vdc/0-15A - Gilroy
HP 6274B DC Power Supply 0-60Vdc/0-15A. Powers on as shown.

267
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules - Gilroy
Tektronix 7603 100 MHz Analog Oscilloscope w/ 7A24 + 7B53A Modules. Powers on as shown.

268
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
Agilent E3630A Triple Output DC Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

269
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A - Gilroy
HP E3630A Triple Output Power Supply 0-6V, 2.5A / 0-±20V, 0.5A. Powers on as shown.

270
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000 - Gilroy
Bruker Avance 400 Digital NMR Spectrometer Cabinet AQS, BSMS/2, BLAX1000.

271
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel - Gilroy
Matrix Test Equipment SX-16 RF Signal Generator 33 Channel.

272
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA - Gilroy
Staco Energy Products PPS-5630 Provider Power System 480V/1Ph/60Hz 50kVA.

273
Matrix Test Equipment ASX-16B RF Signal Generator - Gilroy
Matrix Test Equipment ASX-16B RF Signal Generator.

274
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply - Gilroy
MCL (2) 15425 TWT Amplifiers 5.85-6.425GHz (2) 15424 TWTA Power Supply.

275
Chatillon TCM 201 Motorized Force Test Stand Tension Compression - Gilroy
Chatillon TCM 201 Motorized Force Test Stand Tension Compression. Powers on as shown.

276
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand - Gilroy
Keuffel + Esser 108909 Surveying Transit Level w/ 71-5020 Tripod Stand.

277
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz - Gilroy
Stangenes Industries SI-24381 100kVA Transformer Pri 450V 12-35kHz.

278
Branson IPC 7102 Plasma Etcher - Gilroy
Branson IPC 7102 Plasma Etcher. Powers on as shown.

279
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz - Gilroy
RF Plasma Products RFPP RF-50 Power Supply RF-50S WC 5000W @ 13.56MHz.

280
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode - Gilroy
Plasma-Therm HFS-2000D RF Generator 2kW w/ Eimac 5CX1500A Power Pentode.

281
ENI Power Systems PL2 Plasmaloc 2 RF Generator - Gilroy
ENI Power Systems PL2 Plasmaloc 2 RF Generator.

282
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter - Gilroy
National Instruments NI PXI-5600 PXI 2.7GHZ RF Downconverter.

283
RF Matching Assembly - Gilroy
RF Matching Assembly.

284
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber - Gilroy
Daihen DAUMA-10P RF Match Matching Network, Controllers, Cables, Chamber.

285
ENI OEM-6AM RF Power Generator OEM6AM1B - Gilroy
ENI OEM-6AM RF Power Generator OEM6AM1B.

286
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

287
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX - Gilroy
Agilent G1960-60132 RF Power Amplifier 1.4MHz for Single Quad 61XX.

288
ENI OEM-650A Solid State RF Power Generator - Gilroy
ENI OEM-650A Solid State RF Power Generator.

289
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output - Gilroy
ENI OEM-6AM RF Generator OEM-6AM-1B-01 750W Output.

290
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B - Gilroy
Agilent G1960-60131 1MHz RF Power Amplifer for G6110A G6120A/B G6130A/B.

291
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad - Gilroy
Agilent G1960-60121 Quad Driver 1.0MHz RF Coil Box Assembly Single Quad.

292
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF - Gilroy
Agilent G1969-60057 RF Power Amplifier for 6220 Accurate-Mass TOF.

293
Bruker HyStar Detector & Power Supply - Gilroy
Bruker HyStar Detector & Power Supply,

294
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage - Gilroy
Autronic Melchers DMS 803 Camera w/ Illuminator on Vertical Stage.

295
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

296
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

297
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software *NEW IN BOX* - Gilroy
ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Step Motor Drive w/Software. ACS Motion Control SPiiPlus CM-3-B-E-M0-EGL Stepper Motor Drive with an ADK Version 5.20 Software CD is sealed new in the bo...

298
Adept Technology MV-8 PLC Rack w/5-Modules - Gilroy
Adept Technology MV-8 PLC Rack w/5-Modules.

299
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel - Gilroy
Parker 802-5137I Motorized Linear Positioning Stage, 25x215x365mm Travel.

300
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W - Gilroy
Yaskawa SGMGH-13ACA21 Servo Motor 1300W, SGDM-15ADAY285 Servopack 1500W.

301
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

302
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes the handheld controller, manuals, and accessory kit as ...

303
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm - Gilroy
Lambda Physik NovaLine A2020 Excimer Laser, 80 W, Wavelength 193 nm. Is in excellent cosmetic condition as shown in the pictures. It includes electrical schematics and software as shown. Unfortunat...

304
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

305
Yamada CU-762 Trim and Form Die Punch System - Gilroy
Yamada CU-762 Trim and Form Die Punch System.

306
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System - Gilroy
Schlumberger BLU 100 184 Automated BIB Burn-in Board Loader & Unloader System. Model: BLU 100 184/6217

307
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine - Gilroy
Excellon Automation Uniline 2000 Industrial Single-Spindle Drilling Machine. Model: Uniline 2000.

308
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

309
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

310
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.

311
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine - Gilroy
Koh Young Technology KY-3030VAL 3D Solder Paste Inspection Machine.