Oak Valley Hardwoods
Listing ID#: 316873

Sale Location

North Marion, NC 28752
Sale Dates and TimesSALE IS COMPLETED
Friday Jun 26, 2020 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions


These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 

  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.


 


  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:


IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 

  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.


“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 



  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.


 


  1. Auction Conducted in the State of Indiana.


 




    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.

    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.




 


  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.




The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 

  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.

  2. Nature of the Auction.




X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 

  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.


 


  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.


 


  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:


 




    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.




 




    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.




 




    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.




 




    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.




 




    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.




 




    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.




 




    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.




 




    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.




 




    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,




(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 



    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.




 




    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.




 




    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.




 




    1. Online Bids. Online bids may not be reduced or retracted.




 


  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.


 


  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.


 


  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.


 


  1.  


 


  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.


 


  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.


 


  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.


 


  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.


 


  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.


 


  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or


representation by Auctioneer

 

  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.




  1.  


Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 

  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.


 


  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the





vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 

  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.


 


  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.


 


  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.


 


  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.


 


  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.


 


  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.


 


  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.


 


  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.


 


  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.










 

  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled


to specific performance or other equitable relief.

 

  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.


 


  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.


 


  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.


 


  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.


 


  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.


 


  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.


 


  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.




 
Listing Information
Auction Schedule:
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

Muliple Complete Large Sawmill Setups- Selling At One Auction Optimizing Sawmill Complete Liquidation - Nicholson Ring Debarker
Baxley Trim Line with Hi-Tech J Bar Sorter - Baxley Optimizing Edger

30

00
Information Lot*
Auction Schedule::
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

 

1
All copper

31

96
Jockey Grinder
Like new condition

97
Miller Bobcat Welder
Model 250, ONLY 64 HOURS, 9.5KW Generator, includes the leads.

98
Champion Air Compressor
Model HGR7 with R15 pump, Honda GX390 engine

98A
300 HP Electric Motor
1785 RPM, Frame 449T, Excellent condition, likes like it was never ran since rebuilt

99
3 phase induction motor
250 hp 460 volt/1185 RPM (s/n. 990Y11614) Model B2506FLF4BM, excellent condition

100
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

101
GE 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

102
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

103
LINCOLN 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

104
MAX-SE 3 PHASE INDUCTION MOTOR; 50 HP 1765 RPM, 326T FRAME

105
BALDON 7.5 HP 1770 RPM ELEC. MOTOR; TECO 7.5 HP 12OO RPM ELEC. MOTOR

106
MOTOR BASE

107
MORRIS DRIVE 5.89 HP 1750 RPM 20:1 RATIO

108
SMCYCLO DRIVES 5 HP MOTOR

108A
6' Tables

108B
8' Table

109
PALLET OF MISC

110
VIBRATING CONVEYOR DRIVE (NO MOTOR)

111
PALLET OF MOTORS TO INCLUDE; BALDON 10 HP1760 RPMT MOTOR; LEESON 7.5 HP ELEC. MOTOR; (2) MOTOR BASES;(2)SIEMENS MOTORS; NORD DRIVE SYSTEM

112
PALLET OF (3 DRIVES AND (2) MOTORS

113
POP UP CUT OFF SAW WITH 7.5 HP MOTOR

114
SIEMENS 75 HP 1180 RPM 403T FRAME ELEC. MOTOR

115
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

116
TOSHIBA 150 HP 1180 RPM 445 TZ FRAME ELEC. MOTOR

117
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

118
MARATHON 125 HP 1780 RPM 405TZ FRAME ELEC. MOTOR

119
NEW IN CRATE WORLD WIDE 75 HP 1780 RPM 365T FRAME ELECTRIC MOTOR

120
(4) WAREHOUSE LIGHTS

121
PALLET OF 110 LADDER BACK CHAIN

122
TOSHIBA 200 HP 1780 RPM 447T FRAME ELEC. MOTOR

123
NEWMAN 200 HP1775 RPM ELEC. MOTOR

124
WORLD WIDE 150 HP 1770 RPM 445T FRAME ELEC. MOTOR

125
NEW IN CRATE TECO 75 HP 1775 RPM 365T FRAME ELEC. MOTOR

126
NEW IN CRATE MARATHON 40 HP 1780 RPM ELECTRIC MOTOR

127
NEW IN CRATE WORLD WIDE 100 HP 1790 RPM, 405T FRAME ELEC. MOTOR

128
NEW IN CRATE TECH 200 HP 3584 RPM ELEC. MOTOR

129
LINCOLN 200 HP 17898 RPM, 445T FRAME ELEC. MOTOR

130
LINCOLN 200 HP 1483 RPM 445TS FRAME ELEC. MOTOR

131
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

132
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

133
SQUARE D 5KVA TRANSFORMER

133A
(2) 24" HYDRAULIC CYLINDERS

134
PALLET OF (4) MOTORS (1) LINCOLN 30 HP;(1) 25 HP;(1) WESTINGHOUSE 30 HP; (1) 25 HP TOSHIBA ALL FOR ONE MONEY

135
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

136
(2) HYDRAULIC TANKS AND MISC

137
(2) CARRIAGE END ROLLERS

138
PALLET OF MISC INCLUDES 8 ROLLERS

139
FEED ROLLS AND CYLINDERS

140
PALLET OF V BELTS

141
PALLET OF CAN-AM CHAIN

142
(3) MOTORS (2) LINCOLN 50 HP (1) UNKNOWN

143
(2) MOTORS (1) LINCOLN30 HP (1) UNKNOWN

144
(4) MOTORS (2) MARATHON 3 HP; (1) LEESON 15 HP; (1) 10 HP

145
PALLET OF MOTORS (2) GEAR MOTOR DRIVES;(2) 7.5 HP ; (1) 25 HP MOTOR;(1) 7.5 HP

146
PALLET OF DEBARKER ARMS

147
PALLET OF MISC

148
PALLET OF MISC ELECTRICAL

149
PALLET OF MISC ELECTRONICS

150
PALLET OF CYLINDERS

151
PALLET OF V BELTS

152
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

153
(6) CASES OF PHILLOPS 48" 40 WATT, t12 LIGHT BULBS (30 BULBS PER CASE)
(6) CASES OF PHILLIPS 48" 40 WATT, T12 LIGHT BULBS (30 BULBS PER CASE)

154
PALLET OF PILLOW BLOCK BEARINGS, BORWN DRIVE, MOTOR MOUNTS
PALLET OF PILLOW BLOCK BEARINGS, BROWN DRIVE, MOTOR MOUNTS

155
PALLET OF H78 CHAIN

156
AUTOMATED LUMBER HANDLING SYSTEM ELECTRIC CONTROL BOX

157
NEW IN BOX (6) SIEMENS SENTRON BUS WAY SWITCHES 20 HP

158
SCHNIDER ALTIVAR 61 75 HP

159
PALLET OF CHAIN

160
PALLET OF MISC ELECTRICAL

161
CRATE OF MISC ELECTRICAL

162
(2) DRIVES

163
NEW IN CRATE TECO 15 HP 1765 RPM ELEC. MOTOR

164
SILVA TECH SETWORKS CONTROL BOXES

165
ALLAN BRADELY 1395 RPM SOFT START STARTER PROGRAMMABLE TERMINAL

166
MILLER THUNDERBOLT XL 225 AMP WELDER

167
MILLER THUNDERBOLT XL 225 AMP WELDER

168
CONVEYOR INC. (8) 22' OUTSIDE DIAMETER RIGHT HAND AUGER FLIGHTS

169
PEDESTAL FAN
PEDESTAL FANS

169A
Pedestal fan

169B
Pedestal fan

170
PALLET OF CHAIN AND SHEAVE

171
PALLET OF CABLE

172
PALLET OF MISC

173
ALLAN BRADLEY 40 HP DC DRIVE MOTOR- GEAR REDUCTIONS UNIT; END CABLE FOR CARRIAGE DRIVE

174
MISC ELECTRICAL

175
NEW PALLET LADDER BACK CHAIN

176
NEW PALLET OF 81X CHAIN

177
(1) 400 APM SAFETY SWITCH (2) 30" SWITCHES

178
(3) HYDRAULIC ACCUMULATOR MODELS

179
PALLET WITH TELCO 5 HP MOTOR; KICKER ARM, ROLL OF BELT

179A
Steel Organizer Rack
includes all contents, lots of steel shafts & piping, good rod lot, Includes (2) 3 15/16 in. shafts one is approx. 12ft, one approx. 78in.

179B
Trim Sawblades
24in. Qty. appox. 10

179C
Crate of Sprockets & Pulleys
.

179D
Crate of Sprockets & Pulleys
.

179E
Crate of Chain, Sprocets, & Pulleys
.

179F
Crate of Chain, Sprocets, & Pulleys, and Electric Motor
.

180
STAINLESS STEEL PORTABLE GILL

181
LINCOLN R30S-400 WELDER

182
ALLAN BRADLEY 800 AMP MOTOR CONTROL CENTER WITH (2) SIZE 3 STARTERS; MISC BOXES

183
100 HP SOFT START STARTER

184
NEW IN CRATE WEG SSW 07 SOFT STARTER

185
Leeson Electic Motor 5HP NEW
Model-CHH-6185Y-59 spare for Nicholson

186
Leeson Electic Motor 3HP NEW
.

187
Marathon Inverter Duty Motor
5/3 HP New!

188
Reducer Gear Box
New 25 to 1 ratio ser. # 150300552

189
Gear Box
New

190
Heavy Shaft
New in box

191
Hydraulic Cylinders
.

192
Belting
some brand new

193
Belting
some brand new

194
Electric Motor
50HP 1770 RPM, frame 326 TSC

195
Electric Motor, Toshiba brand new
15HP 1770 RPM, frame 254 T

196
Electric Motor,Nema Designs, Brand New in crate
20HP 1760 RPM, frame 256 T

197
Electric Motor, Crown Triton
3HP, frame 182 TC

198
Electric Motor, Nidec, Nema suitable
10HP, 1760 RPM

199
2 Electric over Hydraulic Valves
appear to be new

200
Electric Motor
225 HP, 1185RPM frame 445 T

201
Electric Motor
Nidec, 2HP, 1750RPM, frame 145 TC

202
Electric Motor
Baldor, 5HP, w/sterns brake

203
Sumitomo Drive
.

204
56PM2A Dodge Drive
electric gear drive w/2HP Baldor electric motor, 1735 RPM, frame 56C

205
Electric Motor
Baldor, 50HP, 1765 RPM, frame 326 T

206
Steel Shaft
NEW! Keyed, approx. 2in. X 36in.

207
Gear Box
.

208
Banding Cart w/tools
.

209
Organizer w/misc. bolts
.

210
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

245
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED

211
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

212
Dayton electric motor
1HP, 1140RPM, brand new

213
Nema electric motor
1HP, 1760RPM, frame 56C

214
Squirrel cage fan in crate
.

215
Tools
3 to 5 cant hooks, 3 log turners, lumber grading stick, pickax, other misc tools. One cant hook has a broken handle.

216
100 amp disconnect
New

217
Chain hoist
CM series 622 2 ton hoist

218
Chain come a long
Coding 1-1/2 ton come a long

219
6’ ladder
Werner step ladder

225
(2) JOY STICK CONTROLS

226
WIRE FEED WELDER HANDLE

227
FULL BODY SAFETY HARNESS SIZE SMALL/MEDIUM

228
STEEL CABINET WITH CONTENTS. MOSTLY WELDING RODS

229
( 4) 5 GALLON BUCKETS RUST OLEUM 7400 SYSTEM ENAMEL PRIMER, (3) 1 GALLON CANS OF RUST OLEUM 7400 SYSTEM ENAMEL PRIMER

229A
(3) 5 GALLON RUST OLEUM 7400 SYSTEM ENAMEL

230
(2) 5 GALLON OF CAR QUEST MULTI-VEHICLE ATF AUTOMACTIC TRANSMISSION FLUID

231
(1) 5 GALLON OF LUBE MASTER PREMA LUBE RED "00"

232
(1) 5 GALLON BUCKET CONQUEST GEAR OIL, SAE80W-90

233
SHERMAN WILLAMS INDUSTRIAL ENAMEL

234
(2) 5 GALLON BUCKETS OF CHEVRON HEAVY DUTY HD00

235
(1) DEV-CON WEAR GUARD HI/LOW 30 LBS

236
GE 400 AMP SWITCH

237
SM-CYCLO GEAR DRIVE

237B
Log Trough/waste Conveyor Drive Sprocket
Good con.

238
NEW NEVER INSTALLED ALLEN BRADLEY POWER FLEX 700 AC DRIVE

238A
Used Allen Bradley starter
Allen Bradley SMC FLRX

239
(2) SHELVES CONTENTS AS MARKED

240
(1) SHELF CONTENTS AS MARKED

241
(1) CONTENT OF SHELF MOSTLY VARIOUS SIZES OF HYDRAULIC CYLINDERS NEW AND USED

242
LOT OF HYD. MOTORS NEW AND USED AS MARKED 1/2 OF SHELF SEPARATED BY ORANGE TAPE

243
1/2 SHELF WITH MOSTLY CYLINDERS AND MISC

244
BOTTOM SHELF AS MARKED MOSTLY USED CYLINDERS

246
TOP SHELF WITH AIR BAGS AS MARKED

247
2ND SHELF (MIDDLE) NEW AND USED BEARINGS; VARIOUS SIZES

248
BOTTOM SHELF NEW AND USED BEARING VARIOUS SIZES AS MARKED

249
2ND SHELF (MIDDLE) MOSTLY NEW AND USED VALVES AS MARKED

250
(8) NEW IN BOX 4 VOLT BEARING MODEL UCF215-47 AS MARKED

251
(5) HARD RUBBER ROLLERS

252
CONTENTS OF 4 SHELVES AS MARKED

253
LOT OF WEAR STRIPS AS MARKED

254
(4) SPLIT SPROCKETS ON FLOOR AS MARKED NEW IN BOX

256
2 SHELVES NEW AND USED SPROCKETS AS MARKED

257
3 SHELVES OF NEW AND USE SPROCKETS AS MARKED

259
CABINET AND CONTENTS

260
WOOD BIN WITH PIPE FITTINGS

261
Misc. Parts
Air valves, bearings, and lots of new parts.

262
Huge lot of New Parts
Sprockets, bushings, 81X roller chain, belts, (no shelving)

263
V Belts
All new belts on the wall.

264
Pipe Bender
With cutter, complete set.

265
Electrical Orginizer Bin
Fully stocked with electrical. Also includes 2 temposonic rods. Also includes orginizer.

266
Orginizer of Electrical
Large fuses, connectors, and more. Includes orginizer.

267
Orginizer with Fittings
PVC fittings and electrical fittings.

268
Orginizer with Electrical
1/2" to 1 1/2" fittings

269
Orginizer with Electrical
Fitings.

270
Orginizer with Electrical
Fittings etc.

270B
Organizer
w/roller chain links

271
High Tech Control Panel
.

272
Tool Box
Loaded with misc. Logging tools. On wheels. Including 4 split saver hammers.

272A
Lincoln 250 Arc Welder
on wheels

272B
Napa Tool Chest
loaded w/gear pulls, well sockets, hose repair kits, and more

272C
Napa Tool Chest
loaded w/misc. tools, bearings, ect

272D
Wheel Barrow & Shovels
some like new

272E
Milwaukee Grinder
big one

272F
Earthquake XT Impact
3/4 drive

272G
Tool Chest
w/wrenches & socket set

272H
Welding Table
on wheels, includes 2 new wheels

272I
Welding Table
w/vise

272J
Filter Cart
w/pump

272K
Moving Cart
nice

273
12 Volt Sprayer
Includes wagon and battery

273A
Log Tongs
Like new

273B
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
.

273C

274
Pallet of Electrical
Parts

275
Pallet of electrical wire
Various sizes.

276
Welder
Hobart stick welder, 300 amp. Serial 12RT-21474

277
Lot of wire
Pallet of misc wire

278
Pallet of Misc.
2 warehouse lights, #60 roller chain, Husqvarna 570 chainsaw, Stihl 290 chainsaw w-bad cylinder, case of new 4' bulbs.

279
Misc belt; office chair box of contents
.

280
Pallet of Nylon Banding & Clips
4-Mar

281
Pallet of Nylon Banding
.

282
Pallet of Parts
HUGE selection of new & used motors, bearings, valves,belt lacing, Dodge bearings & gear boxes & so much more

283
Electric Heater
on wheels

284
Electric Heater
on wheels

285
Electric Heater
on wheels

286
Electric Heater
on wheels

287
Electric Heater
on wheels

300
Progress HOG
28'' Progress HOG WITH 125 HP MOTOR; MODEL 960002, S/N 27 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

301
LOG DECK
3 STRAND 11'X25' LOG DECK WITH ELECTRIC MOTOR AND DRIVE; STOP AND LOAD , Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

302
HMC DEBARKER
36'' HMC DEBARKER WITH ELECTRIC MOTOR MODEL V2010 S/N 639, Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.

303
BELT CONVEYOR
33'X18" BELT CONVEYOR WITH ELECTRIC 5 HP MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

304
CONCAVE BELT CONVEYOR
40'X24" CONCAVE BELT CONVEYOR WITH ELECTRIC MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

305
LOG DECK
35'X9'6" 3 STRAND LOG DECK WITH HYDRAULIC STOP AND LOAD; ELECTRIC MOTOR AND DRIVE , Located at 4595 Jonathan Creek Road, Waynesville NC 28785

306
LOG TURNER
CORELY BAR TYPE  LOG TURNER; CONTROLS IN CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

307
HYDRAULIC UNIT
LOG TURNER HYDRAULIC PACK; 20 HP ELECTRIC MOTOR WITH HYDRAULIC PUMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

308
CORLEY CARRIAGE
16'X 48" CORLEY 3 HEAD BLOCK LINEAL POSITION CARRIAGE; INCLUDES 2004 LEWIS CONTROL READY SCAN 1 SYSTEM WITH DYNA VISION HEADS, CAB AND CONTROLS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

458
Log Trough
w-dual kickers. hyd. drive. heavy duty, approx. 24'

309
HYDRAULIC PACK
40 HP HYDRAULIC UNIT, MODEL AC-5-1-5AC, (S/N: 78700) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

310
CORLEY SHOT GUN FEED
2004 CORLEY SHOT GUN FEED SMA280C, MODEL 01504FLF4UMQ WITH 150 HP TOSHIBA MOTOR (SN: 0402103511) INCLUDES CONTROLS IN SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311
BAND MILL
MCDONOUGH 7' RIGHT HAND BANDMILL ; AIR STRAIN (SN: 84MA-164) 13" FACE, 1 1/8" THICKNESS RUNS 10" BLADE; INCLUDES 5' OFF BEARER BELT, THIS IS A VERY NICE UNIT! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311A
ELECTRIC WINCH
ELECTRIC WINCH FOR LIFTING BANDSAW BLADES (WINCH LOCATED NEXT TO DEBARKER CAB) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311B
LASER LIGHT AT SAW CAB
LASER LIGHT AT SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

312
MOTOR
250 HP TOSHIBA MOTOR UNDER BAND MILL/ FRAME#N587UZ; 1185 RPM; MODEL B2506FLF4BD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

313
SLAB DUMP
13'X31" BELT SLAB DUMP WITH OHIO GEAR REDUCTION DRIVE AND AIR CYLINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

314
ROLL CASE
36''X15' LIGNA MACHINERY ROLL CASE; 7 ROLLS;9" LIVE ROLLS WITH AIR STOP, HEAVY DUTY! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

315
ROLL CASE
25' ROLL CASE W/ 9 ROLLS (24"X7" ROLLS) WITH MORRIS GEAR MOTOR DRIVE; AIR STOP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316
GANG
2004 LIGNA 10X36" TOP ARBOR, THIN KERF GANG WITH 14' SELF POSITIONING INFEED CANT TURNER. (5 LIVE ROLLS, 3 POSITION CHAIN)INCLUDES (2) 200 HP MOTORS, CONTROLS IN CAB, MOTOR CONTROLS AS MARKED ON WALL, OUTFEED ROLL CASE, THIS MACHINE IS A VERY NICE MASS-PRODUCTION MACHINE!  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316A
Electric Motor
200 HP on Gang Saw.

316B
Electric Motor
200 HP on Gang saw.

317
SAW GUIDES AND SAWS FOR GANG
APPROX. 100 - 29.5" DIAMENTER SAW GUIDES AND SAWS FOR GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317A
IMW MODEL 24055 SAW GUIDE GRINDER
IMW MODEL 24055 SAW GUIDE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317B
BABBIT POT
BABBIT POT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317C
BABBIT MOLD FOR GUIDES
BABBIT MOLD FOR GUIDES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317D
ARBOR FOR LIGNA GANG
ARBOR FOR LIGNA GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317E
(4) SAW BLADE CARRYING BOXES
(4) SAW BLADE CARRYING BOXES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

318
TRANSFER DECK
4 STRAND 11'X11' POP UP TRANSER DECK WITH STOP AND LOAD; ELECTRIC MOTOR AND GEAR BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

319
CAB
60"X68" CAB; CONTROLS NOT INCLUDED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320
EDGER
NEW IN 2004 4''x36'' LIGNA MACHINERY EDGER 36' DEAD ROLLS, NO DRIVE; 19'X4" TAILING DEVICE; 2 MOVABLE SAW HYD. SET WITH 60 HP ELEC. MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320A
SAW BLADES FOR EDGER
(8) 17.5" DIAMETER SAW BLADES; (12) 9.5" DIAMETER SAW BLADES FOR EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

321
LASER LIGHTS
(2) FOREST LINE LASER LIGHTS; BRACKET WITH EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

322
TRANSFER DECK
9'X11' 4 STRAND TRANSFER DECK WITH ELECTRIC DRIVE; C55B ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

635
TRANSFER DECK
66' 3- STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

323
BELT CONVEYOR
25'X36" BELT CONVEYOR BELT; GEAR MOTOR DRIVE, NICE UNIT. ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

324
TRANSFER DECK
30'X11' 4 STRAND TRANSFER DECK, C55D ROOF TOP CHAIN W/ 2 SETS OF 4 ARM AIR STOPS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

325
TRANSFER DECK
LIGNA 11'X14' 9 STRAND TRANSFER DECK; C55 D ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

326
TRANSFER DECK
17'X11' 4 STRAND TRANSFER DECK; H78B ROOF TOP CHAIN/ GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

327
LUMBER DECK
21' 3 STRAND LUMBER DECK (2 STRAND H78 ROOF TOP CHAIN;1 STRAND H78 CHAIN) GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328
DROP SAW TRIMMER
22' CORLEY DROP SAW TRIMMER WITH 8 SAWS; 7.5 HP MOTOR ON SAWS WITH LASER LINE; 11' -7 OUT DECK WITH 181X CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328A
SAWS FOR CORLEY TRIMMER
(14) 25.5" DIAMENTER SAWS FOR CORLEY TRIMMER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

329
UNSCRAMBLER
 4 STRAND UNSCRAMBLER, GOOD CONDITION, WITH ELECTRIC DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

330
BELT CONVEYOR
25' BELT CONVEYOR; 24" BELT WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

331
GREEN CHAIN
110'X11' 4 STRAND GREEN CHAIN WITH H78 CHAIN; 5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

332
LUMBER CART
144" X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

333
LUMBER CART
147"X 43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

334
LUMBER CART
112"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

335
LUMBER CART
111"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

336
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

337
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

338
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

339
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

340
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

341
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

537A
PARKER SSD690 DRIVE MOTOR CONTROLS

342
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

343
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

344
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

345
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

346
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

347
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

348
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

349
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

350
LUMBER CART
72"X84" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

351
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

352
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

353
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

354
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

355
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

356
BELT CONVEYOR
26'X14" BELT CONVEYOR WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

357
BELT CONVEYOR
22'X24" BELT CONVEYOR WITH 16" BELT; GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

358
CHIPPER
PROGRESS MODEL 70 CHIPPER, ( SN: 001207) 8 KNIFE, BOTTOM DISCHARGE, NICE MACHINE! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359
MOTOR
TECO-WESTINGHOUSE 250 HP MOTOR, 1785 RPM, 449TZ FRAME ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359A
SOLID STATE REDUCED VOLTAGE STARTER
SQUARE D ALTISTART 46 250 HP SOLID STATE REDUCED VOLTAGE STARTER INCLUDES JUNCTION BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359B
CHIPPER KNIVES
CHIPPER KNIVERS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359C
BABBIT MOLD
BABBIT MOLD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

360
VIBRATING CONVEYOR
33'X18" BOTTOM 10" FLARED SIDES VIBRATING CONVEYOR INCLUDES 5' FIBERGLASS SECTION AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

361
MDI METAL DETECTOR
MDI METAL DETECTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

362
DRAG CHAIN
APPROX. 30' DRAG CHAIN UNDER CHIPPER, H-78 DRAG CHAIN WITH 7.5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

363
BELT CONVEYOR
32'X18" BELT CONVEYOR GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364
SHAKER SCREEN
7'X7' PROGRESS SHAKER SCREEN 2001; HYD. DRIVE, GOOD CON. SN 010031 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364A
Blower
Approx. 32” in dia. and has a 20 hp 3 phase motor and is in very good condition, uninstalled, Located at 4595 Jonathan Creek Road, Waynesville NC 28785

365
BELT CONVEYOR
20'X10" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

366
BELT CONVEYOR
20'X12" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

367
CONVEYOR
30' FINES CONVEYOR WITH H78 CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

368
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, GOOD CONDITION
(approx. 14 unit capacity) 12'X13'
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

369
CHIP CONVEYOR
APPROX. 80'X18" CHIP CONVEYOR WITH H78 DRAG CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

370
BELT CONVEYOR
70'X18" BELT CONVEYOR INCLUDED ALL APRON PLATES ATTACHED; MOTOR AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

371
BELT CONVEYOR
90' BELT CONVEYOR/8"WIDE/ 6" BELT GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

372
BELT CONVEYOR
45'X16" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

373
SHAKER SCREEN
36"X18" SAW DUST SHAKER SCREEN WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

374
DUST CONVEYOR
12'X12" PLEATED SAW DUST CONVEYOR;GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

375
BARN SWEEP CONVEYOR
CORNELL 35'X42 BARN SWEEP CONVEYOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

376
CONVEYOR
APPROX. 100' CONVEYOR WITH 110 LADDER BACK CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

377
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, THIS IS A VERY NICE BIN.
14'X16' (approx. 21 unit capacity)
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

378
AIR COMPRESSOR
INGERSOLL RAND SSR-3P75 AIR COMPRESSOR, 75 HP MOTOR (17704 HRS) CONTROLS AS MARKED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

379
AIR COMPRESSOR
SULLAIR LS-1250HACAC AIR COMPRESSOR WITH 50 HP MOTOR; CONTROLS ATTACHED TO DISCONNECT; NO SWITCHES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380
AIR TANK
RESERVE AIR TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380A
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

381
STAGE STARTER DISCONNECT
TOSHIBA SIZE 5 STAGE STARTER 600 AMP DISCONNECT, 460 VOLT, 60 KVAR CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

382
SOFT START
ALLEN BRADLEY SOFT START FOR 150 HP MOTOR; NO DISCONNECT WITH CIRCUIT BREAKER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

383
MOTOR CONTROL PANEL
MOTOR CONTROL PANEL WITH 7.5 KVAR INCLUDES SHUT OFF CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393A
6" VICE WITH ROLL AROUND METAL TABLE
6" VICE WITH ROLL AROUND METAL TABLE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

384
ELECTRIC SHUT OFFS
ELECTRIC SHUT OFFS AS MARKED (400-20 AMP) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393C
CHIPPER KNIVES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

385
STARTER
SQUARE D SIZE 4 STARTER WITH BUILT IN 225 AMP DISCONNECT. NO WIRE OR CONDUIT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393E
PERSONEL FAN
PERSONEL FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

386
CAPACITOR BANK
AUTOVAR 300 KVAR POWER CAPACITOR BANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393F
BOX FAN
BOX FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

387
ELECTRIC PANELS
ELECTRIC PANELS AS MARKED UNDER MILL ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

388
ELECTRIC PANELS
ELECTRIC PANELS UNDER MILL AND EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393D
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389A
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389B
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

390
DUST FILTER
DUSTKOP DUST FILTER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

391
HAMMERING STATION
ARMSTRONG HAMMERING STATION INCLUDES ARMSTRONG #5 STRETCHER ROLL (SN: 15842) HAMMERING BLOCK, STAND AND ROLLERS INCLUDES ARMSTRONG WELDING CLAMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

392
BLOCK GRINDER
MCDONOUGH GUIDE BLOCK GRINDER (SN: BDM655) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393
CHIPPER KNIFE GRINDER
HANCHETT CHIPPER KNIFE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393B
(8) 9.75" MCDONOUGH BAND SAW BLADES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394
DIP TANK
MONTICELLO 20' DIP TANK INCLUDES HYDRAULIC LIFT, SELF CONTAINED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394A
LUMBER DIPPING STATION FOR DIP TANK
LUMBER DIPPING STATION FOR DIP TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394B
4'X8' MAN LIFT PLATFORM
4'X8' MAN LIFT PLATFORM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394C
LIFTING EXTENSION FOR FORKLIFT
LIFTING EXTENSION FOR FORKLIFT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394D
Precision SHAKER SCREEN
6'X6' SHAKER SCREEN AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394E
AIR DRYER
Located at 4595 Jonathan Creek Road Waynesville NC 28785

394F
RESERVE AIR TANK
RESERVE AIR TANK LOCATED IN BACK SHOP AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

395
(14) ROLLS+B2:B17 5/8 GREEN STRAPPING

395A
MISC ROLLERS AND ELEC. MOTOR 10 HP

395A
Parts room and rack outside at J Creek

400
JOCAR HORIZONTAL BAND RESAW
JOCAR HORIZONTAL BAND RESAW 55" WHEELER, 8" FACE 1 1/8" THICKNESS, CHAIN FEED WITH 2 HYD. HOLD DOWN ROLLERS, PUSH BUTTON CONTROLS, DIRECT LOGIC 06 CONTROLLER. 5-6 3/4" BAND SAW BLADES, 100 HP MOTOR, 30 HP HYDRAULIC PACK AND CONTROLS AS MARKED, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

401
15' 4 STRAND DECK WITH H-78 CHAIN
15' 4 STRAND DECK WITH H-78 CHAIN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395B
SKID MISC CHAIN

402
16' INFEED ROLLCASE
16' INFEED ROLLCASE WITH 11-8X30" ROLLS, 3 AIR OPERATED OP UP CRADDLE TYPE TRUNERS EACH WITH THEIR OWN ELECTRIC DRIVE, ROLL CASE HYDRAULIC DRIVEN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

403
18' OUTFEED ROLLCASE
18' OUTFEED ROLLCASE WITH (8) 6X38" ROLLS, 4 CHAIN ARM JUMP UP TRANSFER AND 4 ARM SKATE ROLLE TIPPLE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395C
SKID MISC PULLEYS

404
DOUBLE SEPARATION SYSTEM
DOUBLE SEPARATION SYSTEM,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

405
4 STRAND TRANSFER DECK
4 STRAND TRANSFER DECK, H-78 CHAIN; DRIVE; 4 ARM JUMP UP TRANSFER,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395D
MISC CONVEYOR BELT

406
50' RETURN ROLLCASE
50' RETURN ROLLCASE WITH (25) 6X24" LIVE ROLLS, 4 ARM JUMP UP TRANSFER, HYDRAULIC DRIVE,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

407
LIGNA HYDRAULIC PACK
LIGNA HYDRAULIC PACK,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395E
4'X7' STEEL WELDING TABLE WITH VICE

408
TIE BACK OF 400-407 WITH A 10% RAISE
TIE BACK OF 400-407 WITH A 10% RAISE , Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

409
WEBSTER VIBRATING CONVEYOR
WEBSTER VIBRATING CONVEYOR MODEL 18/27, 18"X45’  10" FLARED SIDES, NO DRIVE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395F
OLDER LINCOLN WELDER-STICK

425
48" 3HD Salem Carriage
Linear positioning, Saw Cab W/ controls, weighs aprox 25,000 lbs, Good Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

426
Track & Frame
Approx 60' Track, 64" center to center, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395G
WALL OF SHELVES/MISC. BEARINGS/CHAIN

427
Tyrone-Berry 285 Hydraulic Feed
Tyrone-Berry 285 Shotgun Feed Carriage Drive with 150 hp Motor, 40' Cylinders, No Pump! Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

428
6' Prescott vertical Band Saw
12" blade, Weight Strain, Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395H
NEW DEBARKER BEARINGS AND WHEELS

429
INOVEC Light Curtain Scanner System
Comes with YieldMaster 386 control Box, Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

430
Tie Back
425,426, 427, 428, 429, Will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395I
SHELVES W/ MISC PIPE PARTS AND MIS MISC

431
7' Prescott Resaw
comes with Cab and controls, weight Strain blade tension, 10" blade, No.218-M.S. 8737, Fair Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

432
48" Corley Edger
52" x 12' infeed, 12" x 22' Tailing Belt, Missing Blades, Good Working Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

395J
WORKBENCH AND SHELF FULL OF MISC PARTS, GEAR BOXES, BEARINGS

433
Spiral Roll Case
30" x 8' Live Roll Case, Heavy Duty, Good Working Con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714

434
Roll Case
30" x 52' Live Roll Case, Heavy Duty, Good working con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714 

395K
SHELF W/ MISC SPROCKETS, CHAIN

435
Transfer Deck*
4-strand 10' long x 12' wide, electric drive 2hp motor, sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good working Condition

436
Transfer Deck*
4-strand 20' long x 10' wide, no drive, Sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, working Condition

395L
SHELVES OF NEW SPROCKETS, BEARINGS

437
Log Deck*
3-strand 34' long x 10' wide, 7 hp electric drive, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condion

438
Steel WalkWay*
30' x 20' x 60" high steel walkway 30" x 48" Platform with stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

395M
PILE OF HYDRAULIC HOSES

439
Steel WalkWay*
30" x 20' x 48" high, with two stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

440
Belt Conveyor*
36" x 12', no drive, sold off site at 249 banco sawmill rd Burnsville, NC 28714, working condition

395N
PARTS WASHER

441
Green Chain*
4-strand ,100' x 12' Heavy Duty, electric drive, has been partly disassembled. Sold off site at 249 banco sawmill rd Burnsville, NC 28714

442
Roll Case*
30" x approx 20', Live Roll Case, no drive, They are on the outside of the building, sold off site at 249 banco sawmill rd Burnsville, NC 28714, Good Condition

395O
COMPLETE ROOM OF CONTENTS, BELTS, BOLT BIN LOADED, BEARINGS

443
Bar Type Log Turner*
Good Working Condition, Sold off site at 1960 US 19E Burnsville,NC 28714

444
2009 Salsco 40" Shaving Mill*
2009 40" Salsco Shaving Mill, 127 hp Cat Engine, just under 2000 hrs, 3-Belt Conveyors , 15" x 10' , 15" x 20' and 30" x 30', everything is in excellent Condition, Will be sold off site at 2130 Fruitland Rd, Hendersonville, NC 28792, Sells with Reserve.

395P
SHELVES OF MISC/ BRAND NEW CHAIN

445
Extrema MXP-255 24" Planer
Double Surfacer, Helical Heads, Carbide Inserts, Digital Setworks, Power Thickness Controls, 30hp Top, 20hp bottem head, Manuals, tools, Extra Knives Included, bought new and running when removed 5/2020. will be sold off site. Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

446
Newman Whitney S-282 Planer*
18" Serial# 14433, Will be sold off site!, was never installed by owner, considers it for parts, Can be inspected at ;Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395Q
CABINET AND MISC WELDING RODS/LOADED

447
Easi 18' Lumber Conveyor System
24" wide, w/new belt, 1hp motor, infeed to Planer, will be sold off site, Good Working Condition. Can Be Inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

448
2004 Invicta Sliding Table Shaper
TI-14 v.04, Pro Scale Digital Readout for spindle adjustment, Movable spindle used for End Matching Flooring, Will be sold off site, Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone # 828-926-1621

395R
WORKBENCH AND ALL TOOLS/MISC ON BENCH

448A
2004 Invicta Sliding Table Shaper

449
Denailing Punch Machine
2004 OSHA Guarded Hands Free Punch for Denailing Boards, Will be sold off Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395S
SHELVES FULL OF MISC MILL PARTS

450
Tennant 255 Floor Sweeper
Propane, Rider, Serial# HD-1543, low hrs 3998. Will be Sold OFF Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

451
2- Pallets of assorted Motors and Gear Boxes
Browning helical reducer with 3hp motor, High Efficiency Motor, 40 hp, 3 pieces each, motor and gear reducer units, Will BE SOLD OFF SITE!, Good Working Condition. Can be inspected at ; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395T
DEBARKER HEAD

452
Corley Carriage*
3 HB, sells w-62' of track, frame, drive and Berry feed, serial # 30-TD-042 sells with lots of new parts. 

2020
VOLVO L120 ARTICULATING LOADER
WHEEL LOADER (SN: VCEL120HJ0S632242) 4117 HOURS, KILL SWITCH, FULLY ENCLOSED, 23.5R25 TIRES, CLIMATE CONTROLLED CAB,

453
Air Tek Dryer
Serial # 0403 Model # JL1000FHT, 200 PSI, w-control center and service disc. very nice unit.

395U
STEEL RACK

454
Air Dryer Ingersoll Rand
Serial # 892HG1148 Model # HG201E5 was working well when taken out of production.

455
CompAir Compressor
50 HP Ser. # 2HB 546823 Mod. # 218 nice unit.

456
Millermatic 250 Welder
wire welder. No tank.

457
Miller Arc Welder
Model SRH-333, electric

457A
Screw Air Compressor*
50 hp electric motor

500
LOG DECK
THURSDAY AUCTION STARTS HERE
24'X12' - 4 STRAND, 5 ARM STOP & LOADER; INCLUDES 1ST HORIZONTAL SUPPORT BEAM, 20 HP GEAR MOTOR DRIVE, BUILT TO LAST AND IN GOOD CON. 
The first of an entirety.

501
LOG TROUGH
28'  WITH 120 LADDER BACK CHAIN, W-ELECTRIC DRIVE

502
NICHOLSON A6 RING DEBARKER
 SIZE 35" AC LEFT HAND, CHAIN FEED (SN N7631), MFG: 2010 SYDNEY, BRITISH COLUMBIA; INCLUDES 30 HP HYDRAULIC PACK, 100 HP TECO WESTINGHOUSE MOTOR, 30 HP MOTOR FOR INFEED, CONTROLS IN CAB AS MARKED, ONE OWNER! SERVICED BY NICHOLSON, THIS IS RARE OPPORTUNITY!! VERY NICE MACHINE.

502A
ALLEN BRADELY STARTER
100 HP SMC-FLEX SOFTSTART STARTER CUTLER HAMMER, 150 AMP DISCONNECT. DOES NOT INCLUDE CABINET. NO WIRE OR CONDUIT INCLUDED

503
LOG TROUGH
29', OUTFEED WITH 120 LADDER BACK CHAIN, 4 ARM LOG KICKER; S CONSTRUCTION DRIVE, 10HP GEAR MOTOR DRIVE

504
TIE BACK
OF LOTS 500-503 TOGETHER WITH 10% RAISE

504A
Nicholson Debarker Parts
Brand New

504B
Cyclo 6000 Gear Box
Brand New! Serial KY0030270
Will fit on Nicholson debarker for log infeed/outfeed.

505
LOG DECK
39'X12' 4 STRAND, STOP & LOADER WITH W82 CHAIN, 20HP MOTOR, FAULK GEAR BOX, SUPPORTS TO 2ND HORIZONTAL BEAM

506
HMC ROSSERHEAD DEBARKER
42'' HEAVY DUTY, 60 HP ELECTRIC MOTOR; SELF CONTAINED HYDRAULIC SYSTEM, SLANT TRACK, CONTROL CHAIR IN CAB AS MARKED. NO SUPPORT STEEL, THIS DEBARKER IS IN VERY GOOD CONDITION.

506A
ALLEN BRADELY STARTER
SIZE 3, CUTLER HAMMER 150 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED.

507
LOG DECK
16'X11' - 4 STRAND WITH W 82 CHAIN, GEAR MOTOR DRIVE. NO SUPPORT STEEL

508
LOG TROUGH
30' WITH 120 LADDER BACK CHAIN, S DRIVE CONTRUCTION, 10 HP GEAR MOTOR DRIVE. NO SUPPORT STEEL

509
FORTRESS LOG METAL DETECTOR
48"X48"; 23' RENS FIBERGLASS SECTION WITH BELT, TAKES 48" LOG, INCLUDES CONTROLS AS MARKED IN CAB, 10 HP GEAR MOTOR DRIVE. SUPPORT TO 1ST HORIZONAL I BEAM

510
LOG TROUGH
55' SALEM, 5 ARM REJECT LOG KICKER OUTSIDE OF BUILDING, 2 SETS OF 5 ARM LOG KICKER INSIDE BUILDING FOR 2 WAY LOG DISTRIBUTION. INCLUDES SLIDE PLATE AND BIN FOR REJECT LOGS. STEEL SUPPORT TO GROUND AS MARKED. EXTREMELY HEAVY DUTY AND IN EXCELLENT CONDITION.

511
BARK CONVEYOR
65' X 18", UNDER NICHOLAS DEBARKER WITH 110 LADDER BACK DRAG CHAIN, 10 HP GEAR MOTOR DRIVE. 6" SUPPORT BEAMS ONLY

512
BARK CONVEYOR
32', UNDER HMC DEBARKER WITH 110 LADDER BACK CHAIN

513
BARK CONVEYOR
80' , WITH DUAL 110 LADDER BACK CHAIN, 20 HP GEAR MOTOR DRIVE. TO THE HOG 6" SUPPORT LEGS ONLY

514
SALEM GRINDER
24'X30",  BOTTOM DISCHARGE INCLUDES HOPPER. NO MOTOR. NO SUPPORT STEEL.

514A
PALLET OF SWINGING HAMMERS FOR HOG

515
TECO WESTINGHOUSE MOTOR
150 HP ELECTRIC. FRAME 445T, RPM 1775

515A
ALLEN BRADLEY SOFT STARTER
SMC-FLEX 150 HP SOFT START STARTER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

516
DUAL TRAILER LOAD OUT SYSTEM
WITH 36' AUGER SYSTEM, AIR OPERATED DIVERTER CHUTE. SUPPORT TO GROUND, SUPPORT STEEL UNDER BARK SYSTEM

2042
NEW SHOP BUILT 8'X20' DIP TANK WITH LIFT
NEW SHOP BUILT 8X20' DIP TAND WITH LIFT. NO HYD. PACK

517
BARK CONVEYOR
APPROX. 90' WITH 110 LADDER BACK CHAIN, TO TRAILER LOAD SYSTEM, 20 HP GEAR MOTOR DRIVE, 

518
MISC. ELECTRIC BOXES
AT HOG SYSTEM (2) 20 AMP, (2) 30 AMP, NO WIRE OR CONDUIT INCLUDED

519
SUPPORT STEEL
UNDER HOG AND BARK CONVEYOR AS MARKED

520
SUPPORT STEEL
UNDER DEBARKER SYSTEM, CATWALK AS MARKED, STEEL PLATES AS MARKED

521
RESERVE TANK
RESERVE AIR TANK AT METAL DEDECTOR

522
CAMERA SYSTEM
WITH ## CAMERAS, VISIO DISPLAY

523
ALLEN BRADLEY ELECTRICAL
SYSTEM IN SALEM BOX IN SAWYER'S CAB

524
ALLEN BRADLEY ELECTRICAL
PANEL AS MARKED

525
SAWYER'S CAB
(12'X8') CLIMATE CONTROLLED AT DEBARKER

526
ALLEN BRADLEY ELECTRICAL
MCC 800 AMP PANEL INCLUDES TRANSFORMER AND DISCONNECT BUT DOES NOT INCLUDES STARTERS AS MARKED

527
ALLEN BRADLEY POWER FLEX
700 VARIABLE FEED DRIVE

528
ALLEN BRADLEY STARTER AND DISCONNECT
SIZE 2

529
CONTROL BOXES AS MARKED
.

530
STEEL BUILDING
8'X10',  AT DEBARKER SHED

531
SAFETY SWITCHES
(8) MISC SAFETY SWITCHES

532
HYDRAULIC PACK
FOR PARTS WITH 30 HP MOTOR AND ELECTRICAL ATTACHED

533
OPEN SPAN BUILDING
30'X50' PREFAB, OVER DEBARKER INCLUDES LIGHTS

533A
LOG SPRINKLER SYSTEM
LOG SPRINKLER SYSTEM TO INCLUDE 60 HP WATE PUMT AT POND AND DISCONNECT AS MEARKED; (3) SPRINKLER HEADS AND STANDS AS MARKED ON YARD, SPRINLER HEAD ON PALLET AS MARKED

534
LOG DECK
28'X12' 3 STRAND HEAVY DUTY LOG DECK WITH CHAIN, 20 HP GEAR MOTOR DRIVE, 4 ARM STOP AND LOADER. SUPPORTS TO HORIZONTAL BEAM

535
SALEM BAR TYPE LOG TURNER
(SN: 19910 04) INCLUDES 30 HP. SALEM HYDRAULIC PACK, CONTROLS IN CAB.
The first of an entirety.

536
SALEM CARRIAGE
3  HEAD BLOCK LINEAL POSITION VERTICAL SLANT CARRIAGE (16') (SN: 201541-05) ,INCLUDES 60' TRACK AND CRUY END BUMPERS, CABLE TIGHTENER. CLIMATE CONTROLLED SAWYERS CAB (12'X5')

536A
MASS SETWORKS
MASS SETWORKS TO INCLUDE CONTROLS IN CAB AND SCANNER ABOVE CARRIAGE, late model!

537
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES PARKER SSD690 DRIVE MOTOR CONTROLS
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES  PARKER SSD690 DRIVE MOTOR CONTROLS  
INCLUDES WIRE FROM MOTOR TO STARTER.

538
SALEM BAND MILL
6’ RIGHT HAND VERTICAL SLANT BAND MILL (SN: R12798987); AIR STRAIN, 11" FACE, 1 1/4 THICKNESS

539
WEG NEMA PREMIUM MOTOR
1191 RPM, 200 HP, FRAME 504, NO MOTOR CONTROLS INCLUDED

539A
SQUARE D SIZE 6 STARTER
.

540
SLAB DROP
12" X 32", WITH 4 ARM AIR OPERATED EASE OFF

541
TIE BACK
OF LOTS 535-540 WITH 10% RAISE

541A
NEW DRUM SHEAVE FOR CARRIAGE DRIVE*
NEW DRUM SHEAVE FOR CARRIAGE DRIVE, Was Lot 537B

542
ROLLCASE
30', WITH (11) 30'X9" ROLLS, NO DRIVE, AIR STOP. (4) 4 ARM POP UP CHAIN ( BREAK CHAIN- NO SPROCKET)

543
ROLLCASE
20', WITH (7) 30" X9" ROLLS, 7.5 HP GEAR MOTOR DRIVE WITH 6' 4 STRAND POP UP TRANSFER, AIR STOP, GEAR MOTOR AND DRIVE

544
LOG DECK
12'X34' 4 STRAND, 5 ARM STOP AND LOADER, 20 HP GEAR MOTOR DRIVE; SUPPORTS TO HORIZONTAL BEAM

545
COOPER SCRAGG
END DOGGING SCRAGG, WITH COOPER COMPUTERIZED SETWORKS, (2) 150 HP MOTORS, CAB AND CONTROLS AS MARKED. INCLUDES (2) 56" F7 SAWS ON MACHINE

545A
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545B
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545C
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545D
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545E
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

546
(2) WEG SOFT START STARTERS
SSW 07, STARTERS FOR 150 HP MOTOR

547
ALLEN BRADLEY ELECTRICAL
1200 AMP CENTER LINE MCC PANEL. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

548
ROLLCASE
14', WITH 8 (74"X9") ROLLS; 5 AIR OPERATED JUMP UP TRANSFER CHAINS (9').

549
COOPER TRANSFER DECK
10'X14', SLANT BED, GEAR MOTOR DRIVE.

550
ROLLCASE
17', WITH 8 (54"X8") SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

551
ROLLCASE
24', WITH 9 (30"X8") (5 ROLLS ARE SPIRAL) ROLLS WITH 1 AIR STOP. GEAR MOTOR DRIVE

552
ROLLCASE
43', WITH 15 (30"X9") (10 ROLLS ARE SPIRAL) ROLLS GEAR MOTOR DRIVE

553
TRANSFER DECK
14'X9' - 4 STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

554
BELT CONVEYOR
23', WITH 20" BELT. GEAR MOTOR DRIVE

555
ROLLCASE
28', WITH 10 (36"X8") ROLLS, GEAR MOTOR DRIVE

556
SAW CRANE
WITH PETERSBURG ELECTRIC WINCH

557
LUMBER TRANSFER DECK
22'X11'- 5 STRAND, WITH H78A ROOF TOP CHAIN. 3'- 5 STRAND TIPPLE, 5 HP GEAR MOTOR DRIVE. SUPPORT TO HORIZONTAL BEAM
The first of an entirety.

557A
GRAVITY ROLL CASE
8'X18" GRAVITY ROLL CASE

558
LUMBER TRANSFER DECK
20' - 5 STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, 5 HP GEAR MOTOR DRIVE. 4'- 5 STRAND POP UP TIPPLE DEVICE. SUPPORTS TO HORIZONTAL BEAM

559
SALEM LUMBER TRANSFER DECK
18'X11' 4 STRAND, WITH H78 CHAIN, AIR STOP PINS, 4 ARM STOP AND LOADER, GEAR MOTOR DRIVE.

560
SALEM INFEED
13' INFEED TO HORIZONTAL RESAW. 5 (34"X9") ROLLS, 6'- 4 STAND TRANSFER DECK, POP UP CANT TURNER, 4 ARM CANT KICKER

561
SALEM BAND RESAW
2004, 6', RIGHT HAND HORIZONTAL, (SN: 198096R04) FACE 11', THICKNESS 1 3/8"; INCLUDES CONTROLS IN CAB AND CAB. 25 HP HYDRAULIC PACK, WORKS FOR 3 OR 4 SIDED. ALSO MADE TO CONVERT TO A HEAD RIG!
VERY GOOD SAW.

562
WORLD WIDE INDUSTRIAL ELECTRICAL MOTOR
200 HP, 449T, 891 RPM

562A
ALLEN BRADLEY SOFT START
SMC-FLEX SERIES B, MAX 250 HP, SOFT START STARTER WITH CUTLER HAMMER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

563
SALEM OUTFEED
20' OUTFEED ROLLCASE WITH 9 (36"X9") ROLLS INCLUDES (5) 6' AIR POP UP TRANSFER CHAIN, HYDRAULIC DRIVE, AND POP UP BOARD STOP

564
SALEM TRANSFER DECK
12' X 25' 5- STRAND, WITH H78 CHAIN; 5 STRAND SCAPE ROLL INCLUDES 3 WAY SORT

565
BELT CONVEYOR
32', WITH 30" BELT, GEAR MOTOR DRIVE. INCLUDES LEGS TO GRADING

566
TIE BACK
OF 557-565 WITH 10% RAISE

567
SALEM TRANSFER DECK
16'X12', GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

568
BELT CONVEYOR
18', WITH 30" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

569
BELT CONVEYOR
40', WITH 28" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

570
SALEM TRANSFER DECK
27'X11' 4 STRAND LUMBER, WITH H78 CHAIN, SMCYCLO GEAR MOTOR DRIVE

571
TRANSFER DECK
36'X11' 4 STRAND, WITH H78B ROOF TOP CHAIN, SMCYCLO GEAR MOTOR DRIVE

574E
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574D
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

572
TRANSFER DECK
31'X13' 7-STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

573
BAR TYPE UNSCRAMBLER
18'x 5', WITH 18' EVENENDER ROLLS

574
BAXLEY EQUIPMENT EDGER
2011, COMPANY HIGH SPEED OPTIMIZED EDGER SYSTEM TO INCLUDE BUT NOT LIMITED TO: 25' INFEED LUMBER DECK SYSTEM WITH (7) 2' JUMP UP TIPPLES, 7' 8-STRAND TRANSFER WITH 3 SETS 8-ARM LUMBER STOPS, GEAR MOTOR DRIVE, 16' 8-STRAND LUMBER TRANSFER WITH GEAR MOTOR DRIVE, EVENENDER ROLLCASE AND (7) (60"X6") ROLLS, GEAR MOTOR DRIVE, BAXLEY LUMBER SCANNING SYSTEM WITH DYNAVISION LASER TECHNOLOGY, ALL SOFTWARE AND COMPUTERS. BAXLEY 20'HIGH SPEED INFEED WITH SHARP CHAIN, (4) HYD. HOLD DOWN ROLLS. BAXLEY HIGH SPEED 3 GUIDED SAW HIGH SPEED EDGER, 250 HP MOTOR. BAXLEY 22'X48" OUTFEED BELT CONVEYOR, GEAR MOTOR DRIVE. 25 HP HYD. PACK, COOLING AND CLEANING FAN FOR LASERS. NO MAIN MOTOR CONTROLS. COMPLETE PACKAGE IN GOOD CONDITION! ONE OWNER!

574A
ALLEN BRADLEY SOFT START STARTER
SMC-FLEX SERIES B 300 HP MAX, WITH CABINET INCLUDES GE 400 AMP SWITCH

574B
ALLEN BRADLEY CENTER LINE
MCC PANEL

574C
SAWS AND SAW GUIDES
SAW GUIDES AND SAW BLADES.

574d
Sheffer air cylinder
48” air cylinder for Baxley Edger in feed

574DD
SHEFFER AIR CYLINDER
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574e
Mitsubishi Air condition unit
Mitsubishi Mr Slim E410A split unit air conditioner

575
BELT CONVEYOR
18', WITH 42" BELT, SUMITOMO GEAR MOTOR DRIVE

576
TRANSFER DECK
42'X13' 6-STRAND LUMBER, (5 STRANDS WITH C55D CHAIN), SMCYCLO GEAR MOTOR DRIVE

577
BELT CONVEYOR
32', WITH 24" BELT, SUMITOMO GEAR MOTOR DRIVE

578
SALEM TRANSFER DECK
13'X10.5' 4-STRAND LUMBER, WITH H78 CHAIN, 4 AIR STOPS, GEAR MOTOR DRIVE

579
SALEM TRANSFER DECK
16'X11' 4-STRAND,  WITH H78B CHAIN, 4 BAR STOP AND LOAD, SMCLCLO GEAR MOTOR DRIVE

580
SALEM COMBINATION GANG/EDGER
10", 18" GANG SIDE, 32" EDGER SIDE, 10" TOP OF BLADE TO SHAFT. INCLUDES INFEED, CANT POSITIONING ROLLER, CANT TURNER, WITH LIVE LINE BAR, LASER LIGHT GUIDE SYSTEM (NO LASER LIGHTS) (SN: 69890-95) DOES NOT INCLUDE MAIN ARBOR MOTORS. DOES INCLUDE HYDRAULIC UNIT AND OILING SYSTEM

580A
FILE ROOM SAW GUIDES FOR GANG
SAW GUIDES FOR GANG AND MAINTENANCE PARTS IN FILE ROOM

580B
SAFETY SWITCHES
(2) 100 AMP SAFETY SWITCHES; (1) 30 AMP SAFETY SWITCH

581
LAHARCO LASER LIGHT
(1) 

582
LAHARCO LASER LIGHT
(1) 

583
150 HP MOTOR
HIGH EFFICIENCY, 1775 RPM, 444T FRAME

584
BALDOR 150 MOTOR
150 HP ELECTRIC, 1780 RPM, 445T FRAME. NO MOTOR CONTROLS

585
ROLLCASE
26', WITH 10 (25"X6") ROLLS, 3 HP GEAR MOTOR DRIVE

585A
DAYTON 30 KW HEATER

585B
SCHAFFER 4X4' BOX FAN

586
TRANSFER DECK
15'X13' 5-STRAND,  (4 STRAND: H78B CHAIN, 1 STRAND H78 CHAIN), GEAR MOTOR DRIVE

587
SALEM UNSCRAMBLER
13' WIDE, BAR CHAIN TYPLE, SMCYCLO GEAR MOTOR DRIVE

588
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

589
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

590
BUCHER HYDRAULIC PACK
12 VOLT HYDRAULIC POWER PACK INCLUDES 12 VOLT BATTERY. MODEL: M3551-0219 AND CONTROLS

591
PUSH BUTTON CONTROL PANEL
(3) 30 AMP SAFETY SWITCHES

592
ROLLCASE
18',  8 (24"X7" SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

593
BELT CONVEYOR
34', WITH 24" BELT, SMCYCLO GEAR MOTOR DRIVE; 11' PARTIAL INCLINE, STEEL SUPPORT TO FLOOR

594
BELT CONVEYOR
24', WITH 30" BELT, SMCYCLO GEAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

595
BELT CONVEYOR
34', WITH 17" BELT, SMCYCLO GREAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

596
TRANSFER DECK
34' - 4 STRAND, WITH 81X CHAIN, 4 ARM STOP. GEAR MOTOR DRIVE

597
ROLLCASE
25', CONVEYOR 12 (20"X9" ROLLS. NO DRIVE

598
BREWER DOUBLE ARBOR GANG
MODEL BR-81245-P (SN: 113090) WITH SIZER HEAD, CONTROL BOX. 12' INFEED ROLLCASE 13(27"X5") ROLLS (NO DRIVE). INCLUDES HYDRAULIC PACK, 10 HP MOTOR, 60 HP TOP ARBOR, 100 HP BOTTOM ARBOR, 50 HP SIZER HEAD. WITH MOTOR CONTROLS AS MARKED. THIS UNIT IS IN CLOSE TO NEW CONDITION!

598A
ROLL AROUND TABLE
30"X60" ROLL AROUND TABLE

599
OUTFEED ROLLCASE
14', WITH 8 (24" X6" ) ROLLS. GEAR REDUCTION DRIVE

600
SAWS AND SPACERS
FOR GANG

600A
(3) ROLLS OF BELT

600B
ROLL 600 VOLT WIRE

601
SALEM BELT CONVEYOR
78', WITH 29" BELT. GEAR MOTOR DRIVE

602
LUMBER TRANSFER DECK
65'X13' 6-STRAND, WITH C550 ROOF TOP CHAIN. SYCYCLO GEAR MOTOR DRIVE

603
POP UP TRANSFER DECK
24'X11.5' 4-STRAND, WITH H78C CHAIN, S DRIVE CONSTRUCTION, 1 DRIVE, 1 SHAFT, NO TAIL SHAFT WITH DRIVE
The first of an entirety 

604
POP UP TRANSFER DECK
18' TRANSFER ROLLCASE WITH (36"X10") ROLLS WITH 6' 4 STRAND POP UP TRANSFER, 1 SHAFT, BREAK CHAINS AT 605

605
SALEM TRANSFER DECK
27'X11' 4-STRAND, WITH H78 CHAIN AND (7) 3 ARM AIR STOPS, SENSOR EYES, S DRIVE CONSTRUCTION, GEAR MOTOR DRIVE, NO TAIL SHAFT

606
SALEM LIVE LINE BAR INFEED
20'WITH 7 (36"X10") ROLLS. 4 ARM POP UP EVENENDER ROLLS TRANSFER, CANT TURNER, 4 POP UP CANT HOLDERS

607
SALEM LEFT HAND LINE BAR RESAW
6',  (SN L15286681) 11" FACE, 1 1/8" THICKNESS ON WHEELS, 8' LIVE LINE BAR, AIR STRAIN, NO MAIN MOTOR, NO HYDRAULIC SUPPLY

608
SALEM OUTFEED
18' ROLLCASE WITH 7 (54"X9") ROLLS. DUAL 4 STRAND POP UP TRANSFER CHAINS

609
150 HP MOTOR
(NO TAG EXACT HP UNKNOWN; RUNS RESAW)

609A
ALLEN BRADLEY SMC FLEX SOFT START STARTER
SERIES A STARTER WITH CUTLER HAMMER 400 AMP DISCONNECT AND CABINET. MAXIMUM 200 HP

610
SALEM HYDRAULIC PACK
30 HP MOTOR AND 10 HP MOTOR WITH PUMP

611
TRANSFER DECK
6'X11' 4 STRAND, GEAR MOTOR DRIVE. NO TAIL SHAFT

612
TRANSFER DECK
3'X10.5, WITH 3' TIPPLE; GEAR MOTOR DRIVE

613
SALEM TRANSFER DECK
19' X11L5', 4 STRAND WITH (4) 4 ARM LUMBER STOPS WITH ELECTRIC EYES, 3' TIPPLE, SMCYCLO GEAR MOTOR DRIVE

614
POP UP ROLLCASE
15' WITH 6 (30"X9") ROLLS, AIR POP UP. GEAR MOTOR DRIVE

615
ROLLCASE
16', 7 (30"X9") ROLLS, ELECTRIC EYES TO STOP, SMCYCLO GEAR MOTOR DRIVE

616
POP UP ROLLCASE
13', WITH 6 (30"X9") ROLLS, AIR CYLINDER POP UPS

617
TIE BACK
OF LOTS 603-616 WITH A 10% RAISE

618
ROLLCASE
25', WITH 9 (54"X7") ROLLS. GEAR MOTOR DRIVE. STEEL TO FLOOR

619
TRANSFER DECK
24'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

620
TRANSFER DECK
25'X13' 5-STRAND TRANSFER DECK WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

621
TRANSFER DECK
25'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

622
SALEM UNSCRAMBLER
14' WIDE

623
CARBOTECH TRIM SAW
INTERNATIONAL 22' TRIM SAW MACHINE #10-214-110, 17 SAWS, WILL INCLUDE INFEED SECTION WITH 9'X22' EVENER ROLLCASE, EXCELLENT CONDITION.
The first of an entirety. 

623A
SALEM BELT CONVEYOR
24'x 30" BELT, GEARMOTOR DRIVE, UNDER TRIM SAW

624
BAXLEY OPTIMIZING SCANNER
22' PASS, INCLUDES HYDRAULIC PACK. DYNA VISION, SCANNERS WITH COMPUTERS/SOFTWARE IN OPERATOR'S OFFICE, COOLING AND CLEANING BLOWER IN BASEMENT AS MARKED, THIS UNIT IS IN EXCELLENT CONDITION!

625
LUCIDYNE TECHNOLOGIES GRADE MAR READER
WITH CONTROLS IN ELECTRICAL ROOM, COMPUTER SYSTEM AS MARKED

626
TRANSFER DECK
As marked.

2021
VOLVO MODEL 82041 7 METER BUCKET
(SN: 7024-00420) QUICK COUPLER

627
INFEED OVERALL SECTION
42', INCLUDES SALEM SPIRAL ROLLCASE WITH 6 (5'X12") ROLLS; GEAR MOTOR DRIVE TO A 6' TRANSFER LUG LOADER ; INCLUDES 26' LUGGED TRANSFER DECK (NO TAILING SHAFT)

2022
QUICK COUPLE "R" LOG FORK WITH BALE CLAMP
 6' 

628
TIE BACK
TOGETHER 623-627 WITH 10% RAISE, ALL IN EXCELLENT CONDIITON.

629
TRIM SAW OUTFEED
17'X14', WITH 6 STRAND LUGGED TRANSFER 9'X7" EVENER ROLLS, 3' 8-ARM TIPPLE. INCLUDES HYDRAULIC PACK FOR EVENER ROLLS
The first of an entirety.

630
BELT CONVEYOR
20', WITH 29" BELT. GEAR MOTOR CONTROLS

631
TRIM SAW BLADES
(25) RESHARPENED ON WALL. 22" BLADES

632
HI-TECH J-BAR SORTER
42 (4') BINS. INCLUDES HYDRAULIC PACK, ROOF SYSTEMS ATTACHED, CONTROLS IN ELECTRIC ROOM AS MARKED, ATTACHED CATWALK

633
TRANSFER DECK
60' 3-STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

634
TRANSFER DECK
70' 3-STRAND,  WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

635
66' 3 STRAND DECK WITH H-78 CHAIN
66' 3 STRAND DECK WITH H-78 CHAIN, S DRIVE CONSTRUCTION, SMCLCLO GREAR REDUCTION DRIVE

636
HI TECH 8' STICKERING STACKER
HI-TECH 8' STICKERING STACKER INCLUDES BUT NOT LIMITED TO 20'X12' 5 STRAND PACKAGE DECK, GEAR REDUCTION DRIVE; H78 CHAIN, NO TAIL SHAFT; 8'X15' 8 STRAND WATERFALL UNSCRAMBLER; EVEN ENDER ROLLS; 5 ARM-8' STICKERING STACKER UNIT; STICKERING STATION, 20'X8' ELEVATOR ROLLCASE

637
40'X8' OUTFEED PACKAGE ROLL OUT WITH DRIVE

638
35' - 5 STRAND PACKAGE DECK
35' -5 STRAND PACKAGE DECK; S DRIVE CONSTRUCTIONS, GEAR MOTOR DRIVE; H78 CHAIN, MOTOR CONTROLS, 75 HP HYD PACK, SALEM 10 HP HYDRAULIC PACK

639
TIE BACK
OF LOTS 629-638 WITH A 10% RAISE

640
MASTER TIE BACK
Lots 628 & 639 
(everything from lot 623 thru 639) 

645
FULGHUM 8 KNIFE
66' 8 KNIFE HFVD (SN: FL-F1L-1702) INCLUDES 2 HP HYDRAULIC PACK FOR CYLYNDAR HOOD LIFT, DISCHARGE PIPE TO CYCLONE. NO MOTOR

645A
CHIPPER KNIVES , HOLDERS AND ANVILS
Will include all knives at and around chipper and inside box

646
TECO 300 HP MOTOR
1780 RPM. BELT STAYS WITH CHIPPER

647
ALLEN BRADLEY SOFT STARTER
300 HP STARTER NO WIRE OR CONDUIT INCLUDED

648
SALEM SHAKER SCREEN
8'X8'

649
8' CYCLONE
NO PIPE

649A
PUSH BUTTON CONTROL STATION FOR CHIPPER SYSTEM
.  

650
BARN SWEEP CHIP CONVEYOR
44'X 6' (26'FLAT, 18' INCLINE); GEAR MOTOR DRIVE

651
CONCAVE BELT CONVEYOR
26', WITH 36" TWEETED BELT. INCLINE AND LEGS INCLUDED. GEAR REDUCTION DRIVE

652
CONCAVE BELT CONVEYOR
110', WITH 36" TWEETED BELT. GEAR REDUCTION DRIVE

653
CONCAVE BELT CONVEYOR
96', WITH 24" TWEETED BELT. GEAR REDUCTION DRIVE

654
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK (LARGEST OF 3)
Approx. 30 unit capacity

655
US METAL WORKS CHIP BIN
NO HYDRAULIC PACK (MIDDLE)
Approx. 21 unit capacity.

656
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK
Approx. 21 unit capacity.

657
CAROLINA BLOWER COMPANY BLOWER
SIZE 70-6EHD (SN 5786) NO PIPE

658
DUST PIPE WITH STAND
APPROX. 275' OF 29" DUST PIPE WITH STAND AND ALL ELBOWS TO CYCLONE

659
CYCLONE
12', WITH AIR LOCK. NO PIPE

660
WEBSTER VIBRATING CONVEYOR
57',  24" BOTTOM, 10" FLARED SIDES. INCLUDES 12' SCREEN SECTION, 5' FIBERGLASS SECTION, 10 HP DRIVE MOTOR CONTROL, AND CHIPPER CHUTE

661
MDI METAL DETECTOR
.

662
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

663
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
64' WEBSTER VIBRATING CONVEYOR 24" BOTTOM, 10" FLARED SIDES. 10 HP MOTOR DRIVE

663A
Webster Vibrating Conveyor
40' x 24" bottom, 10" flared sides, 5 hp electric drive

664
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
55', 24" BOTTOM, 10" FLARED SIDES. 15 HP MOTOR DRIVE

1054
MARYVILLE AERIAL WORK PLATFORM
1999,MODEL 2033ES, 20' HEIGHT, MAX WEIGHT 750LBS24 VOLTS; (SN: 08802318)
 

665
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
45', 18" BOTTOM, 10 " FLARED SIDES. 3 HP MOTOR DRIVE

1018
TAYLOR MODEL REP-2505 (SN: 5-HS-21948) 25,000 LB CAPACITY, 8'X12" WIDE FORK, SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 19 HRS, SO WILL ESTIMATE 10,091 HRS. CUMMINS ENGINE (OIL CAP MISSING) DUAL FRONT TIRES 10: 00-20 (1-90%, 1-30%, 2-10%) REAR TIRES (1-100%, 1-80%)

666
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
30', 18" BOTTOM, 7" FLARED SIDES. 3 HP MOTOR WITH CUT OFF

1019
TAYLOR MODEL TE250M (SN; H5-21723) 25,000 LB CAPACITY 7'X8" FORKS SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 2357 HRS, CUMMINS ENGINE DUAL 10: 20 TIRES ON FRONT(2 FRONT: 80%, OTHER 2 20%) (REAR: 60%)

667
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
70', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

668
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
20', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

669
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE WITH CUT OFF

670
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
40',  24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

671
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
82', 18" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

672
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
69', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

1023
HYSTER H1100XL 10,000 LB FORKLIFT (SN: F006016061) (NO PLATE FOR SN) 6'X6" FORKS
MACHINE SHOWING 981 HOURS. PERKINS MODEL 1004 ENGINE DUAL FRONT TIRES 8-25-15 (20%)

673
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
75', 24" BOTTOM, 10" FLARED SIDES. 20 HP MOTOR DRIVE

674
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
50', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
44', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675A
VIBRO MODEL SP-200 VIBRATING MOTOR

675B
Webster Vibrating Conveyor
10ft section, brand new

676
SAW DUST CONVEYOR
13', UNDER VERTICAL RESAW WITH 110 LADDER BACK CHAIN. GEAR MOTOR DRIVE

677
QUINCY AIR COMPRESSOR
MODEL QSI500, 100 HP MOTOR, COOLING FAN, 200 AMP SAFETY SWITCH

678
SULLAIR AIR COMPRESSOR
20-150LACAC24KT WITH 150 HP MOTOR, 400 AMP SAFETY SWITCH

679
SULLAIR AIR COMPRESSOR
MODEL VCC-2005 VARIABLE CAPACITY, 150 HP MOTOR, 400 AMP SAFETY SWITCH

680
PNEUMATICH HEATLESS AIR DRIER SYSTEM
MODEL EH750

681
HANKISON AIR DRIER SYSTEM
HHE-450 AIR DRIER SYSTEM UNDER CARRIAGE DRIVE

682
PATTON'S AIR DRIER SYSTEM
MODEL P80

683
RESERVE AIR TANK
.

684
RESERVE AIR TANK
UNDER COOPER SCRAGG

684A
ALL AIR LINES, AIR HOSES AND AIR VALVES NOT ATTACHED TO EQUIPMENT ALREADY SOLD

684B
CRATE OF MP HUSKEY WIRE TRAYS

685
ALLEN BRADLEY CENTER LINE
MCC PANEL, 1200 AMP NO WIRE OR CONDUIT INCLUDED

686
ALLEN BRADLEY POWER FLEX
700 VARIABLE SPEED DRIVE

687
SAF DRIVE INC SOFT START
OPAL PRO SOFT START. MODEL MS6B-420-C-400 MAX 400 HP "" STARTER ONLY REMOVE FROM CABINET

688
GANG SAW MCCC CONSOLE
INCLUDES ALLEN BRADLEY FRAME B SERIES, VARIABLE SPEED DRIVE. MULTIPLE SWITCHES AND CABINET

688A
ALLEN BRADLEY SMC-FLEX CAT.NO. 150-F201NBD 200v/60HP;480V/150 HP

689
ALLEN BRADLEY CENTER LINE MCC PANEL
1000 AMP. NO WIRE OR CONDUIT INCLUDED

690
ALLEN BRADLEY CENTER LINE MCC PANEL
600 AMP NO WIRE OR CONDUIT INCLUDED

691
ALLEN BRADLEY CENTER LINE MCC PANEL
300 AMP NO WIRE OR CONDUIT INCLUDED

692
POWER FLEX 700 VARIABLE SPEED DRIVES
(5) SERIES B

693
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694A
30 AMP DISCONNECT THROUGH OUT UPPER FLOOR SAWMILL AS MARKED NO WIRE OR CONDUIT

1044A
RAVENS ALUMINIUM FLATBED TRAILER*
WITH BOLTED ON LOG BUNKS

694B
BREAK STATION AT TRIMMER

694C
MILLER THUNDERBOLT XL AC/DC WELDER

695
CAT WALK, STAIRS, CROSSOVERS, SAFETY FENCES
ON MAIN SAWMILL FLOOR. DOES NOT INCLUDE ANY STEPS FROM SAWMILL FLOOR TO CONCRETE BASEMENT AREA

696
ALL STRUCTURE STEEL IN THE MAIN MILL BUILDING
INCLUDING ALL FLOORING AND STRUCTURAL STEEL TO THE CONCRETE, NOT TO BE REMOVED UNTIL ALL ATTACHED EQUIPMENT HAS BEEN REMOVED, BUYERS OF LARGE ATTACHED EQUIPMENT HAVE THE RIGHT TO DISMANTLE IF NECESSARY TO REMOVE THEIR PIECE

700
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS (SN: 15608)

701
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702A
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

703
FILE ROOM DUST COLLECTOR
.

704
FILE ROOM DUST COLLECTOR
.

705
FILE ROOM DUST COLLECTOR
.

706
FILE ROOM ARMSTRONG BAND SAW FILING STATION
INCLUDES ARMSTRONG STRETCHER ROLL, 12" X 60" HAMMER BLOCK, ARMSTRONG #10 WELDING CLAMP, BENCH WITH ROLLERS

707
FILE ROOM PRECISION 4 KNIFE CHIPPER KNIFE TUB TYPE GRINDER
.

708
FILE ROOM CHIPPER KNIFE MANTAINANCE BENCH
WITH CONTENTS LESS ANY CHIPPER KNIVES

1049A
Log Trailer *
4 BUNK , WITH STRAPS

708A
TORCH CARD
TORCH CART

708B
BREAK STATION IN FILE ROOM (2) MICROWAVES, TOASTER, MINI FRIG

708C
CONTENTS OF CLOSET AS MARKED IN FILE ROOM

708D
WOOD BENCH AND CONTENTS IN FILE ROOM

708E
GRINDING TOOLS TO INCLUDE SWEDGE, SHAPERS AND DRESSERS IN FILE ROOM

708F
SIEMENS ROLLERS FOR GRINDER

708G
CABINET AND CONTENTS IN FILE ROOM

708H
(2) SAFETY HOOD

1061

709
FILE ROOM DUST BLOWER
12", 3 HP MTOOR, ALL PVC PIPE IN FILE ROOM

1064

710
FILE ROOM SALEM SAW GUIDE GRINDING MACHINE
(SN: 171360-96)

1065

711
FILE ROOM BABBIT MOLD
FOR CHIPPER KNIVES

1066

712
FILE ROOM BABBIT MOLD
FOR SAW GUIDES

1067

713
FILE ROOM BABBIT POT AND LADLE
.

1068

713A
SALEM GUIDE GRINDER
.

1069

714
FILE ROOM SHAFFER BOX FAN
54"X54", VENTILATION EQUIPMENT BOX FAN

1070

715
FILE ROOM HEATER
59" PERSONEL HEATER

1073

716
FILE ROOM NORTON 12" BAND SAW GRINDING ROCKS
.

1074

717
FILE ROOM AIR MASTER PEDESTAL FAN
30'

1075

718
ARMSTRONG LEVELER
(SN 2026B) OUTSIDE FILE ROOM

1076

719
BAND SAW BLADES OUTSIDE FILE ROOM
.

1077

720
BAND SAW BLADES OUTSIDE FILE ROOM
.

1078

721
BAND SAW BLADES OUTSIDE FILE ROOM
.

1079

722
BAND SAW BLADES OUTSIDE FILE ROOM
.

1080

723
BAND SAW BLADES OUTSIDE FILE ROOM
.

1081

724
BAND SAW BLADES OUTSIDE FILE ROOM
.

1082

725
BAND SAW BLADES OUTSIDE FILE ROOM
.

1083

726
BAND SAW BLADES OUTSIDE FILE ROOM
.

1084

727
BAND SAW BLADES OUTSIDE FILE ROOM
.

1085

728
BAND SAW BLADES OUTSIDE FILE ROOM
.

1086

729
BAND SAW BLADES OUTSIDE FILE ROOM
.

1087

730
BAND SAW BLADES OUTSIDE FILE ROOM
.

1088

731
BAND SAW BLADES OUTSIDE FILE ROOM
.

1089

732
10" (3) WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1116

733
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1119

734
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1121

800
NEW 8'x20' LUMBER DIP TANK NEVER USED SHOP BUILT. DIP ASSEMBLY, NEW CYLINDER, NO HYDRAULIC POWER

1122

801
8'X20' LUMBER DIP TANK WITH LIFT ASSEMBLY- NO HYDRAULIC PACK; NO CYLINDER

1123

802
LUMBER DIP TANK
LUMBER DIP TANK INCLUDES 8’x20’ TANK AND LIFT ASSEMBLY. DOES NOT HAVE HYD CYLINDER OR HYD POWER. TANK IS LOCATED BESIDE STICKER STAKER LINE.

1124

803
IMPERIAL CYCLONE WITH DUST HOUSE INCLUDES DUST PIPE AS MARKED

1125

804
4X4' METAL STAND

1128

805
40" DIAMETER MISC. BLOW PIPE AS MARKED

1129

806
62' OF 24" DIAMETER DUST PIPE (4 SECTIONS)

1130

807
40' CORNELL BALACED VIBRATING CONVEYOR WITH 18" BOTTOM, 12" SIDES WITH DRIVE. APRROX. 7.5 HP MOTOR

1131

808
40' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM, 9" SIDES WITH DRIVE

1132

809
60' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM AND 9" SIDES WITH DRIVE

1133

810
50' CONVEYOR WITH 110 LADDER BACK CHAIN; NO DRIVE

1134

811
16'X3' FRAME

1135

812
18'X24" BELT CONVEYOR NO DRIVE

1136

813
DEBARKER HEAD

1137

814
21'X24" BELT CONVEYOR. NO BELT. DRIVE INCLUDED

1138

815
MEADOWS 9' X10" BELT CONVEYOR

1139

816
WEBSTER 21' VIBRATING CONVEYOR 24" BOTTOM, 10" SIDE, 15 HP MOTOR ON DRIVE ""NOTE: 10' SECTION WITH BUSTED PADDLES

1146

817
23'X24" BELT CONVEYOR NO DRIVE

1148

818
20' SECTION PAN BOTTOM FRAME 18" BOTTOM 9" SIDES, NO FIBERGLASS PADDLES

1149

819
PRENTICE GRAPPLE FOR KNUCKLEBOOM LOADER

1150

820
QUICK COUPLE FORKS FOR LAODER
QUICK COUPLE FORKS FOR LOADER

1151

821
45'X24" BELT CONVEYOR FRAME. NO DRIVE

1152

822
COOK 36E2 2 SAW BOARD EDGER, NO INFEED/NO OUTFEED/ NO MOTOR

1156

823
8'X11' 5 STRAND HAUL UP DECK NO DRIVE

1157

824
40'X29" BELT CONVEYOR NO BELT/ NO DRIVE

1158

825
SALEM 10 SAW 16' TRIMMER WITH 0 AND MINUS 1 SAW. WILL PASS A 23' BOARD (SN: 135980) 10 HP MOTORS ON SAWS

1159

826
16' HEMCO TRIMMER 10 SAW WITH 0 AND MINUS 1 SAW.

1160

827
PALLET OF 81X HAULER UP CHAIN

1161

2001

828
12'X60' HANDS OFF SELF POSITIONING INFEED TABLE; CHROME ROLLS, 3 CHAINE ARM POSITIONING, 3 SETS OF 3 AIR STOP PINS WITH DRIVE

1162

829
SALEM TAILING DEVICE

1163

1000
CATERPILLAR 950 WHEEL LOADER (SN: CAT950KCR4A0214)
FRIDAY AUCTION STARTS HERE
2015 MODEL, 23.5R25 TIRES-50%, 9249 HOURS, QUICK COUPLE
THIS IS A VERY NICE MACHINE! 

1164

1001
6' BALE TYPE LOG FORKS
.

1002
BUCKET WITH QUICK COUPLE
.

1003
CAT 924K ARTICULATING RUBBER TIRE LOADER
2015 MODEL
(SN: C8N32278), 7011 HOURS, QUICK COUPLE. RUNS GREAT
VERY NICE CLEAN MACHINE.

1003A
VOLVO L150C WHEEL LOADER*
PIN# L150CV60784, 10,200 HOURS
RUNS GREAT, COMPLETELY REFURBISHED BY VOLVO IN 2018! QUICK COUPLER.

1003b
VME America’s bucket quick couple. Model 94743
.

1004
KOMATSU WA250PT-5) TOOL CARRIER
(SN70289) ARTICULATING LOADER WITH QUICK COUPLE ATTACHMENT, KOMATSU DIESEL ENGINE, JRB QUICK COUPLE LUMBER FORKS WITH BALE CLAMP.  BROKEN FORARM,
BAD HYD. LEAK BETWEEN TANK AND HY. PUMP DOES RUN AND OPERATE.

1004A
Cat 930 Wheel Loader* WITH BUCKET
sn: 41K12618) HOUR METER MISSING
RUNS GREAT

1005
SET OF BALE FORKS
QUICK COUPLE BALE FORK (SN 80835)

1005A
QUICK COUPLE BALE FORKS

1005B
QUICK COUPLE 7' FORKS WITH CLAMP

1014A
Linde H160 Forklift *
LOCATED AT  68 SNOWBIRD ROAD, ROBBINSVILLE, NC 28771

1005C
LOG PUSHER ATTACHMENT
FOR LOADING CONTAINERS.
LOCATED AT: 4595 JONATHAN CREEK ROAD WAYNESVILLE NC 28785

1005D
LOG PUSHING ATTACHMENT
LOG PUSHING ATTACHMENT FOR LOADING CONTAINERS

1005E
Container push pole
For use with single fork push bar for loading containers

1007
VOLVO QUICK COUPLE FORKS
-80153

1008
Wheel Loader*
L120C Volvo BM, hrs unknown, engine does not work loss compression, Transmission was still good when it was running, sold off site at 249 banco sawmill rd Burnsville, NC 28714, rough condition

1009
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Carrier  Serial # 11901. New factory engine installed with 0 hours!
NOTE: this machine is still located at: 4595 Jonathan Creek RD Waynesville NC because the engine did not get fully installed. Please see one of the auction staff if you have interest in this machine.

1010
BRUTE HUSKY LX175 KNUCKLEBOOM LOADER
ON SELF PROPELLER CARRIER, LEVER CONTROLS (SN: 859299), JOHN DEERE DIESEL MOTOR, HYDRAULIC PACK FOR BUCK SAW, CONTINUOUS ROTATING GRAPPLE

1011
Barko 160B Knuckleboom Loader
1995 , self propelled, lever controls, 6 BT Cummins engine, Rototec grapple, runs and operates good.

1012
John Deere 843H Cutter
FD22 Head, meter reads 10,382 hrs. new teeth, tires @ 50% runs & operates good

1013
300 CATERPILLAR MODEL DP135 (SN: 5DP00127)
30,000 LB FORKLIFT 16,934 HOURS, SIDE SHIFT, 7'3"X8" FORKS, CAT DIESEL ENGINE, 12:00 TIRES, DUAL TIRES ON FRONT, RIGHT SIDE TIRES 50%, LEFT SIDE 20%) 
RUNS GREAT

1022
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT (SN: AN29B80042), 6' FORKS, SIDE SHIFT, TRIPLE MAST, PROPANE, PNEUMATIC TIRES, 7250 HRS

1014
HYSTER 300XL FORKLIFT 30,000 LB
(SN D19D23304), 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL TIRES, PERKINS DIESEL, ENCLOSED CAB, 12.00-20 DUAL TIRES (80/FRONT: 10/BACK) Meter reads 1717 hours, but has probably rolled over.
 RUNS

1014B
TAYLOR TE-300M FORKLIFT LOADER LEVEL CAPABLITIES*
SERIAL #S-H6-24666, 25,000LB LIFT CAPACITY, 8068 HOURS;LOADER LEVEL CAPABILITIES, BRAND NEW BATTERY , RUNS GREAT

1015
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT. (SN: T43105.0269), TRIPLE SEE THRU MAST, 8' SELF POSITIONING FORKS, DUAL TIRES, CUMMINS DIESEL ENGINE, SHOWS 4942 HRS. *DOES NOT RUN. HAS ELECTRONIC ISSUES, MOTHER BOARD IS MISSING. WILL BE SOLD FROM ITL CURRENT LOCATION, AND CAN BE INSPECTED AND PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1016
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK

1017
USNR MODEL F305 30,000 LB FORKLIFT
USNR MODEL F305 30,000 LB FORKLIFT (SN: CE3050170010409) 8' SELF POSITIONING FORKS, SEE THRU MAST, SHOWS 5356 HRS. CUMMINS DIESEL ENGINE, DUAL TIRES.  HAS ENGINE ISSUES, DOES NOT RUN.  CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020
TAYLOR 250 E-250M BIG RED FORKLIFT
TAYLOR 250 E-250M BIG RED FORKLIFT, (SN: S-H5-1906) 8' FORKS, SIDE SHIFT, DUAL TIRES, DETROIT ENGINE.TRANSMISSION ISSUES. DOES NOT RUN. CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020A
TAYLOR Y-22WO FORKLIFT
TAYLOR Y-22WO FORKLIFT (SN: 3-68-4413) 22,000 LB CAPACITY; 6' FORK, DETROIT ENGINE, DOES NOT RUN; DOES HAVEDUAL TIRES; SIDE SHIFT; LOCATED AT J CREEK SITE

1020B
TAYLOR 300 FORKLIFT
TAYLOR 300 FORKLIFT;8' FORKS; SEE THROUGH MAST, DOES NOT RUN; BURNT; LOCATED IN J. CREEK

1021
NISSAN 11000 FORKLIFT
(DF05N50V) DUAL TIRES, 11,000 CAPACITY. (SN: DF05000430), 8' FORKS, SIDE SHIFT, 8.25.15 PNEUMATIC TIRES, AHOQINF ``6744 HOURS, DIESEL ENGINE, ENCLOSED CAB, SEE THROUGH TRIPLE MAST, RUNS GOOD , WAS USED TO SETUP THE AUCTION-NEEDS NEW BATTERIES 

1024
CATERPILLAR DPL40 9000 FORKLIFT
 9,000 LB FORKLIFT, DIESEL ENGINE, 4' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL PNEUMATIC TIRES, (SN: 3CN90542) 2434 HOURS
RUNS, NEEDS SEAL BETWEEN TRANSMISSION AND TORQUE CONVERTER REPLACED LEAKS HYD. OIL 

1025
NISSAN 90 FORKLIFT
MODEL WGF03A40V; CHASSIS: WGF03-920713, 9,000 LB FORKLIFT, TRIPLE MAST, SIDE SHIFT FORKS, 4' FORKS. DIESEL ENGINE, DUAL HARD TIRES ALL THE WAY AROUND, 6382 HOURS
EITHER HEAD GASKET OR INJECTOR PUMP PROBLEM.  WILL CRANK AND RUN

1026
TAYLOR "LITTLE RED" THD100 FORKLIFT: SN: P31023
10,000 LB CAPACITY, 4' FORKS, SIDE SHIFT, SEE THRU MAST, PERKINS DIESEL ENGINE, SHOWING 1057 HRS, BIG TIRES ON FRONT (13.00-24) BACK (9.00-20).  RUNS GOOD.

1027
HYSTER 120FT FORTIS FORKLIFT
2017 MODEL, HYSTER 120FL FORTIS FORKLIFT, TURBO DIESEL (SN: U0005V04367P) TRIPLE MAST, SIDE SHIFT, 8'FORKS, DUAL TIRES, SHOWS 2516 HRS. ONE OWNER! VERY NICE MACHINE!!

1028
HYSTER H50XM FORKLIFT
HYSTER H50XM FORKLIFT (SN: 177B48997B) TRIPLE MAST, SIDE SHIFT, 4' FORKS, PROPANE, PNEUMATIC TIRES, DOESN'T RUN

1028A
Komatsu FG4OZ Forklift*
KOMATSU FG4OZ FORKLIFT, (SN: 1107238) 8,000 LB CAPACITY, SIDE SHIFT, PROPANE, 4' FORKS, 7360 HOURS  WAS RUNNING, QUIT; AND HAS NOT RUN SINCE

1029
JCB Track Skidsteer
2004, model 4400KG Serial # 118777L Pilot controls, 2225 hrs. brand new tracks. runs and operates good, nice machine.

1029A
BOBCAT 753 SKID STEER*
6933 HOURS, RUNS 

1029B
Bobcat 743B skid steer
Bobcat 743B skid steer s/n 509324270 With bucket showing 2137 hours. 1 FLAT TIRE , NO KEY

1030
750 John Deere Dozer
meter reads 5532 hrs. runs and operates like it should. 12' blade

1031
2008 FREIGHTLINER CL120 TRACTOR WITH COLUMBIA SLEEPER
 (1FUJA6CV78L41179 ) EDEN FULLER 10 SPEED TRANSMISSION. 700,335 MILES, DETROIT DIESEL MERCEDES (OM460LACID781). RUNS AND DRIVES. NEEDS WIRING HARNESS, 1 SET OF WHEELS MISSING

1031A
2007 VOLVO TRACTOR*
2007  VOLVO TRACTOR 856,833 MILES , RUNS  (SN: 414NC9GH07N457017)

1032
2000 STERLING DAY CAB TRUCK
(SN: 2FZHCYB1AF41762) FULLER TRANSMISSION, DISREPAIR, CUMMINS DIESEL. DOES NOT RUN. PARTS TRUCK

1033
2005 VOLVO TRUCK
2005 VOLVO TRUCK, (VIN: 4V4NC9GG35N386620), 10 SPEED

1033A
Ford Sterling Truck*
2006, 102,000 miles, C7 Cat engine, Michelin tires @ 90% this truck is in excellent condition.

1034
2012 FREIGHTLINER CASCADIA TRUCK
2012 FREIGHTLINER CASCADIA TRUCK, (VIN: 1FUJGLDR6CBL5976), 10 SPEED TRANSMISSION, DOUBLE BUNK SLEEPER, DETROIT DD15 DIESEL, HAS ELECTRONIC PROBLEM

1035
LTL 9000 Ford Truck
With 60 series Detroit deisel, good running unit

1035A
1988 INTERNATIONAL DUMP TRUCK
1988 INTERNATIONAL S1600 DUMP TRUCK, SINGLE AXLE, STEEL DUMP BED; INTERNATIONAL DIESEL ENGINE. (SN: 1HTLAZRM5JH558937) ; MANUEL TRANSMISSION; SHOWING 49,430 MILES,ONSITE AND RUNS GOOD, DEAD BATTERY

1036
2000 FORD F650 SUPER DUTY TRUCK
(3FDWF65H3YMA03246), CAT DIESEL ENGINE, (1650) MAXON TOMMY LIFT,   75R.22.5 TIRES.  RUNS GREAT.

1037
FORD F350 SUPER DUTY SERVICE TRUCK
STAND TRANSMISSION, GRANNY LOW, 7.3 POWER STROKE DIESEL ENGINE, 4 DOOR, 189,999 MILES.  EITHER OIL PUMP OR INJECTOR PUMP. WILL START AND RUN. CREW COULD NOT GET IT STARTED , DEAD BATTERY

1037AA
FORD 350 TRUCK (VIN: 1FDKF38F9TEB42285)
POWER STROKE DIESEL SERVICE TRUCK. RUNS, CREW COULD NOT GET IT STARTED, DEAD BATTERY

1037B
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) EXTENDED CAB WORK TRUCK
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) 146,000 EXTENDED CAB WORK TRUCK, RUNS AND DRIVES WELL

1038
2013 FORD XL 150 4X4 PICK UP
2013 FORD XL 150 4X4 PICKUP, AUTO TRANSMISSION, GAS ENGINE NEEDS TUNE UP, TRANSMISSION WORKS BUT IS WEAK. RIGHT NOW THE SPARK PLUGS ARE OUT AND WILL NOT START. BUT TRUCK DOES RUN. HAS OVER 300,000 miles

1039
2003 PEERLESS 45' WALKING FLOOR TRAILER VIN: 1PLE045283PG53021)
WITH KEITH WALKING FLOOR 11R24.5 TIRES (5-70%, 3-10%-20%) ALUMINUM RIMS

1040
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1292A45266T199047)
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # V12, TIRES: (2-70%, 6-20%)

1041
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1Z92A452136T19118))
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES (FRONT 4-70%, REAR: 20%) , V14

1042
2006 (ITT) INNOVATIVE 45' OPEN TOP CHIP VAN (SN: 1Z92A45246T199046)
(VIN:1Z92A45246T199046) ) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # U12, TIRES: FRONT AXLE 4: 50%, REAR: 2-10%, 2-50%)

1042A
2015 PITTS OPEN TOP TRAILER*
MODEL CV-45, 66300 GVWR , 20,000LB GROSS AXLE WEIGHT, SER 5JYCV4523GE161697

1042B
BUDD OPEN TOP TRAILER*
CC3404YZ0687

1042C
BUDD 1978 OPEN TOP TRAILER*
SL2S450B50 , SN163211M, GVWR 70,000

1043
1973 FRUEHAUF CLOSE TOP DUST TRAILER
(HPR472095) FIXED TANDEM, 295/75R 22.5 TIRES

1044
FRUEHAUF 40' OPEN TOP VAN TRAILER
.

1055
MARYVILLE AERIAL WORK PLATFORM
MODEL 2033, 20' HEIGHT, 800 LB CAPACITY, 24 VOLT; (SN; 08601416)  

1044A
1991 RAVEN ALUMINUM FLATBED TRAILER
1991 RAVEN ALUMINUM FLATBED TRAILER; (1R1F04825MJ913116) WITH BOLTED ON LOG BUNKS

1045
1997 TRANSCRAFT ALUMINUM FLAT BED TRAILER
MODEL: EAGLE W2 48X96, VIN: ITTF4820000622

1046
1990 RAVENS 48' X96" ALUMINUM FLAT BED TRAILER
SPEAD AXLE, (1R1F04826LE900219) 11R22.5 TIRES

1046A
1995 UTILITY FLATBED TRAILER* (SN:104F52480SA605005)
78,000 GVWR

1046B
1994 Trailmobile Trailer
48' x 96", model# F71T-5EAA, STEEL, WOOD FLOOR

1047
FMCSA Tandem Trailer
1999, aluminum floor, 42' road ready.

1047A
Benco Tandem Axle Trailer*
45', good floor and road ready

1047B
1994 TRANSCRAFT FLATBED TRAILER*
MODEL TL2000 W2 , 48'X96" , 80,000GVWR ,WITH REMOVABLE LOG BUNKS  (SN; 1TTF48202R1040988) 

1047BB
1995 Flat Bed Trailer*
96" x 45' Steel Aluminum Combo Transcraft Trailer. One side landing gear doesn't work and one axle hanger is cracked. Good Tires, brakes and lights. been using it until June 12th.

1047C
2000 LUFKIN FLATBED TRAILER* (SN: 1L01B482341146461)
WOODEN FLOORS

1047D
TRANSCRAFT EAGLE FLAT BED TRAILER
TRANSCRAFT EAGLE FLAT BED TRAILER; SUPER BEAM, SPREAD AXLE; 48"X96";(VIN: ITT-F4520-021044588) ALUMINUM BED

1048
Log Trailer
42' dual bunk, new pins & bushings & springs. Road ready.

1049
PITTS LOG TRAILER (MFG: 6-99) MODEL LT-40-B DOUBLE BUNK
(1PELT40XXP990712) 11R22 TIRES

1049A
1989 NABORS DOUBLE BUNK LOG TRAILER
1989 NABORS DOUBLE BUNK LOG TRAILER (VIN: 1L01B4823Y1146461)

1050
Pup Trailer
Road ready.

1051
Log Bed
Brand new

1052
Log Bed
In close to new condition.

1053
Log bed
w-straps.

1054
Log bunk
.

1056
Quick attach lumber forks
4’ lumber forks

1057
Log bunk steel
Steel pieces pre cut to make log bunks for flat bed trailers
Photo Gallery

Gallery 1 (2000 images)          Gallery 2 (2000 images)          Gallery 3 (699 images)
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

Oak Valley Hardwoods

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:
Sale Location
8482 US 221 North
North Marion, NC 28752
Sale Dates and Times
Friday Jun 26, 2020 Completed
Sale Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Auction Schedule:
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

Muliple Complete Large Sawmill Setups- Selling At One Auction Optimizing Sawmill Complete Liquidation - Nicholson Ring Debarker
Baxley Trim Line with Hi-Tech J Bar Sorter - Baxley Optimizing Edger

30

00
Information Lot*
Auction Schedule::
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

 

1
All copper

31

96
Jockey Grinder
Like new condition

97
Miller Bobcat Welder
Model 250, ONLY 64 HOURS, 9.5KW Generator, includes the leads.

98
Champion Air Compressor
Model HGR7 with R15 pump, Honda GX390 engine

98A
300 HP Electric Motor
1785 RPM, Frame 449T, Excellent condition, likes like it was never ran since rebuilt

99
3 phase induction motor
250 hp 460 volt/1185 RPM (s/n. 990Y11614) Model B2506FLF4BM, excellent condition

100
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

101
GE 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

102
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

103
LINCOLN 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

104
MAX-SE 3 PHASE INDUCTION MOTOR; 50 HP 1765 RPM, 326T FRAME

105
BALDON 7.5 HP 1770 RPM ELEC. MOTOR; TECO 7.5 HP 12OO RPM ELEC. MOTOR

106
MOTOR BASE

107
MORRIS DRIVE 5.89 HP 1750 RPM 20:1 RATIO

108
SMCYCLO DRIVES 5 HP MOTOR

108A
6' Tables

108B
8' Table

109
PALLET OF MISC

110
VIBRATING CONVEYOR DRIVE (NO MOTOR)

111
PALLET OF MOTORS TO INCLUDE; BALDON 10 HP1760 RPMT MOTOR; LEESON 7.5 HP ELEC. MOTOR; (2) MOTOR BASES;(2)SIEMENS MOTORS; NORD DRIVE SYSTEM

112
PALLET OF (3 DRIVES AND (2) MOTORS

113
POP UP CUT OFF SAW WITH 7.5 HP MOTOR

114
SIEMENS 75 HP 1180 RPM 403T FRAME ELEC. MOTOR

115
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

116
TOSHIBA 150 HP 1180 RPM 445 TZ FRAME ELEC. MOTOR

117
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

118
MARATHON 125 HP 1780 RPM 405TZ FRAME ELEC. MOTOR

119
NEW IN CRATE WORLD WIDE 75 HP 1780 RPM 365T FRAME ELECTRIC MOTOR

120
(4) WAREHOUSE LIGHTS

121
PALLET OF 110 LADDER BACK CHAIN

122
TOSHIBA 200 HP 1780 RPM 447T FRAME ELEC. MOTOR

123
NEWMAN 200 HP1775 RPM ELEC. MOTOR

124
WORLD WIDE 150 HP 1770 RPM 445T FRAME ELEC. MOTOR

125
NEW IN CRATE TECO 75 HP 1775 RPM 365T FRAME ELEC. MOTOR

126
NEW IN CRATE MARATHON 40 HP 1780 RPM ELECTRIC MOTOR

127
NEW IN CRATE WORLD WIDE 100 HP 1790 RPM, 405T FRAME ELEC. MOTOR

128
NEW IN CRATE TECH 200 HP 3584 RPM ELEC. MOTOR

129
LINCOLN 200 HP 17898 RPM, 445T FRAME ELEC. MOTOR

130
LINCOLN 200 HP 1483 RPM 445TS FRAME ELEC. MOTOR

131
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

132
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

133
SQUARE D 5KVA TRANSFORMER

133A
(2) 24" HYDRAULIC CYLINDERS

134
PALLET OF (4) MOTORS (1) LINCOLN 30 HP;(1) 25 HP;(1) WESTINGHOUSE 30 HP; (1) 25 HP TOSHIBA ALL FOR ONE MONEY

135
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

136
(2) HYDRAULIC TANKS AND MISC

137
(2) CARRIAGE END ROLLERS

138
PALLET OF MISC INCLUDES 8 ROLLERS

139
FEED ROLLS AND CYLINDERS

140
PALLET OF V BELTS

141
PALLET OF CAN-AM CHAIN

142
(3) MOTORS (2) LINCOLN 50 HP (1) UNKNOWN

143
(2) MOTORS (1) LINCOLN30 HP (1) UNKNOWN

144
(4) MOTORS (2) MARATHON 3 HP; (1) LEESON 15 HP; (1) 10 HP

145
PALLET OF MOTORS (2) GEAR MOTOR DRIVES;(2) 7.5 HP ; (1) 25 HP MOTOR;(1) 7.5 HP

146
PALLET OF DEBARKER ARMS

147
PALLET OF MISC

148
PALLET OF MISC ELECTRICAL

149
PALLET OF MISC ELECTRONICS

150
PALLET OF CYLINDERS

151
PALLET OF V BELTS

152
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

153
(6) CASES OF PHILLOPS 48" 40 WATT, t12 LIGHT BULBS (30 BULBS PER CASE)
(6) CASES OF PHILLIPS 48" 40 WATT, T12 LIGHT BULBS (30 BULBS PER CASE)

154
PALLET OF PILLOW BLOCK BEARINGS, BORWN DRIVE, MOTOR MOUNTS
PALLET OF PILLOW BLOCK BEARINGS, BROWN DRIVE, MOTOR MOUNTS

155
PALLET OF H78 CHAIN

156
AUTOMATED LUMBER HANDLING SYSTEM ELECTRIC CONTROL BOX

157
NEW IN BOX (6) SIEMENS SENTRON BUS WAY SWITCHES 20 HP

158
SCHNIDER ALTIVAR 61 75 HP

159
PALLET OF CHAIN

160
PALLET OF MISC ELECTRICAL

161
CRATE OF MISC ELECTRICAL

162
(2) DRIVES

163
NEW IN CRATE TECO 15 HP 1765 RPM ELEC. MOTOR

164
SILVA TECH SETWORKS CONTROL BOXES

165
ALLAN BRADELY 1395 RPM SOFT START STARTER PROGRAMMABLE TERMINAL

166
MILLER THUNDERBOLT XL 225 AMP WELDER

167
MILLER THUNDERBOLT XL 225 AMP WELDER

168
CONVEYOR INC. (8) 22' OUTSIDE DIAMETER RIGHT HAND AUGER FLIGHTS

169
PEDESTAL FAN
PEDESTAL FANS

169A
Pedestal fan

169B
Pedestal fan

170
PALLET OF CHAIN AND SHEAVE

171
PALLET OF CABLE

172
PALLET OF MISC

173
ALLAN BRADLEY 40 HP DC DRIVE MOTOR- GEAR REDUCTIONS UNIT; END CABLE FOR CARRIAGE DRIVE

174
MISC ELECTRICAL

175
NEW PALLET LADDER BACK CHAIN

176
NEW PALLET OF 81X CHAIN

177
(1) 400 APM SAFETY SWITCH (2) 30" SWITCHES

178
(3) HYDRAULIC ACCUMULATOR MODELS

179
PALLET WITH TELCO 5 HP MOTOR; KICKER ARM, ROLL OF BELT

179A
Steel Organizer Rack
includes all contents, lots of steel shafts & piping, good rod lot, Includes (2) 3 15/16 in. shafts one is approx. 12ft, one approx. 78in.

179B
Trim Sawblades
24in. Qty. appox. 10

179C
Crate of Sprockets & Pulleys
.

179D
Crate of Sprockets & Pulleys
.

179E
Crate of Chain, Sprocets, & Pulleys
.

179F
Crate of Chain, Sprocets, & Pulleys, and Electric Motor
.

180
STAINLESS STEEL PORTABLE GILL

181
LINCOLN R30S-400 WELDER

182
ALLAN BRADLEY 800 AMP MOTOR CONTROL CENTER WITH (2) SIZE 3 STARTERS; MISC BOXES

183
100 HP SOFT START STARTER

184
NEW IN CRATE WEG SSW 07 SOFT STARTER

185
Leeson Electic Motor 5HP NEW
Model-CHH-6185Y-59 spare for Nicholson

186
Leeson Electic Motor 3HP NEW
.

187
Marathon Inverter Duty Motor
5/3 HP New!

188
Reducer Gear Box
New 25 to 1 ratio ser. # 150300552

189
Gear Box
New

190
Heavy Shaft
New in box

191
Hydraulic Cylinders
.

192
Belting
some brand new

193
Belting
some brand new

194
Electric Motor
50HP 1770 RPM, frame 326 TSC

195
Electric Motor, Toshiba brand new
15HP 1770 RPM, frame 254 T

196
Electric Motor,Nema Designs, Brand New in crate
20HP 1760 RPM, frame 256 T

197
Electric Motor, Crown Triton
3HP, frame 182 TC

198
Electric Motor, Nidec, Nema suitable
10HP, 1760 RPM

199
2 Electric over Hydraulic Valves
appear to be new

200
Electric Motor
225 HP, 1185RPM frame 445 T

201
Electric Motor
Nidec, 2HP, 1750RPM, frame 145 TC

202
Electric Motor
Baldor, 5HP, w/sterns brake

203
Sumitomo Drive
.

204
56PM2A Dodge Drive
electric gear drive w/2HP Baldor electric motor, 1735 RPM, frame 56C

205
Electric Motor
Baldor, 50HP, 1765 RPM, frame 326 T

206
Steel Shaft
NEW! Keyed, approx. 2in. X 36in.

207
Gear Box
.

208
Banding Cart w/tools
.

209
Organizer w/misc. bolts
.

210
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

245
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED

211
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

212
Dayton electric motor
1HP, 1140RPM, brand new

213
Nema electric motor
1HP, 1760RPM, frame 56C

214
Squirrel cage fan in crate
.

215
Tools
3 to 5 cant hooks, 3 log turners, lumber grading stick, pickax, other misc tools. One cant hook has a broken handle.

216
100 amp disconnect
New

217
Chain hoist
CM series 622 2 ton hoist

218
Chain come a long
Coding 1-1/2 ton come a long

219
6’ ladder
Werner step ladder

225
(2) JOY STICK CONTROLS

226
WIRE FEED WELDER HANDLE

227
FULL BODY SAFETY HARNESS SIZE SMALL/MEDIUM

228
STEEL CABINET WITH CONTENTS. MOSTLY WELDING RODS

229
( 4) 5 GALLON BUCKETS RUST OLEUM 7400 SYSTEM ENAMEL PRIMER, (3) 1 GALLON CANS OF RUST OLEUM 7400 SYSTEM ENAMEL PRIMER

229A
(3) 5 GALLON RUST OLEUM 7400 SYSTEM ENAMEL

230
(2) 5 GALLON OF CAR QUEST MULTI-VEHICLE ATF AUTOMACTIC TRANSMISSION FLUID

231
(1) 5 GALLON OF LUBE MASTER PREMA LUBE RED "00"

232
(1) 5 GALLON BUCKET CONQUEST GEAR OIL, SAE80W-90

233
SHERMAN WILLAMS INDUSTRIAL ENAMEL

234
(2) 5 GALLON BUCKETS OF CHEVRON HEAVY DUTY HD00

235
(1) DEV-CON WEAR GUARD HI/LOW 30 LBS

236
GE 400 AMP SWITCH

237
SM-CYCLO GEAR DRIVE

237B
Log Trough/waste Conveyor Drive Sprocket
Good con.

238
NEW NEVER INSTALLED ALLEN BRADLEY POWER FLEX 700 AC DRIVE

238A
Used Allen Bradley starter
Allen Bradley SMC FLRX

239
(2) SHELVES CONTENTS AS MARKED

240
(1) SHELF CONTENTS AS MARKED

241
(1) CONTENT OF SHELF MOSTLY VARIOUS SIZES OF HYDRAULIC CYLINDERS NEW AND USED

242
LOT OF HYD. MOTORS NEW AND USED AS MARKED 1/2 OF SHELF SEPARATED BY ORANGE TAPE

243
1/2 SHELF WITH MOSTLY CYLINDERS AND MISC

244
BOTTOM SHELF AS MARKED MOSTLY USED CYLINDERS

246
TOP SHELF WITH AIR BAGS AS MARKED

247
2ND SHELF (MIDDLE) NEW AND USED BEARINGS; VARIOUS SIZES

248
BOTTOM SHELF NEW AND USED BEARING VARIOUS SIZES AS MARKED

249
2ND SHELF (MIDDLE) MOSTLY NEW AND USED VALVES AS MARKED

250
(8) NEW IN BOX 4 VOLT BEARING MODEL UCF215-47 AS MARKED

251
(5) HARD RUBBER ROLLERS

252
CONTENTS OF 4 SHELVES AS MARKED

253
LOT OF WEAR STRIPS AS MARKED

254
(4) SPLIT SPROCKETS ON FLOOR AS MARKED NEW IN BOX

256
2 SHELVES NEW AND USED SPROCKETS AS MARKED

257
3 SHELVES OF NEW AND USE SPROCKETS AS MARKED

259
CABINET AND CONTENTS

260
WOOD BIN WITH PIPE FITTINGS

261
Misc. Parts
Air valves, bearings, and lots of new parts.

262
Huge lot of New Parts
Sprockets, bushings, 81X roller chain, belts, (no shelving)

263
V Belts
All new belts on the wall.

264
Pipe Bender
With cutter, complete set.

265
Electrical Orginizer Bin
Fully stocked with electrical. Also includes 2 temposonic rods. Also includes orginizer.

266
Orginizer of Electrical
Large fuses, connectors, and more. Includes orginizer.

267
Orginizer with Fittings
PVC fittings and electrical fittings.

268
Orginizer with Electrical
1/2" to 1 1/2" fittings

269
Orginizer with Electrical
Fitings.

270
Orginizer with Electrical
Fittings etc.

270B
Organizer
w/roller chain links

271
High Tech Control Panel
.

272
Tool Box
Loaded with misc. Logging tools. On wheels. Including 4 split saver hammers.

272A
Lincoln 250 Arc Welder
on wheels

272B
Napa Tool Chest
loaded w/gear pulls, well sockets, hose repair kits, and more

272C
Napa Tool Chest
loaded w/misc. tools, bearings, ect

272D
Wheel Barrow & Shovels
some like new

272E
Milwaukee Grinder
big one

272F
Earthquake XT Impact
3/4 drive

272G
Tool Chest
w/wrenches & socket set

272H
Welding Table
on wheels, includes 2 new wheels

272I
Welding Table
w/vise

272J
Filter Cart
w/pump

272K
Moving Cart
nice

273
12 Volt Sprayer
Includes wagon and battery

273A
Log Tongs
Like new

273B
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
.

273C

274
Pallet of Electrical
Parts

275
Pallet of electrical wire
Various sizes.

276
Welder
Hobart stick welder, 300 amp. Serial 12RT-21474

277
Lot of wire
Pallet of misc wire

278
Pallet of Misc.
2 warehouse lights, #60 roller chain, Husqvarna 570 chainsaw, Stihl 290 chainsaw w-bad cylinder, case of new 4' bulbs.

279
Misc belt; office chair box of contents
.

280
Pallet of Nylon Banding & Clips
4-Mar

281
Pallet of Nylon Banding
.

282
Pallet of Parts
HUGE selection of new & used motors, bearings, valves,belt lacing, Dodge bearings & gear boxes & so much more

283
Electric Heater
on wheels

284
Electric Heater
on wheels

285
Electric Heater
on wheels

286
Electric Heater
on wheels

287
Electric Heater
on wheels

300
Progress HOG
28'' Progress HOG WITH 125 HP MOTOR; MODEL 960002, S/N 27 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

301
LOG DECK
3 STRAND 11'X25' LOG DECK WITH ELECTRIC MOTOR AND DRIVE; STOP AND LOAD , Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

302
HMC DEBARKER
36'' HMC DEBARKER WITH ELECTRIC MOTOR MODEL V2010 S/N 639, Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.

303
BELT CONVEYOR
33'X18" BELT CONVEYOR WITH ELECTRIC 5 HP MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

304
CONCAVE BELT CONVEYOR
40'X24" CONCAVE BELT CONVEYOR WITH ELECTRIC MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

305
LOG DECK
35'X9'6" 3 STRAND LOG DECK WITH HYDRAULIC STOP AND LOAD; ELECTRIC MOTOR AND DRIVE , Located at 4595 Jonathan Creek Road, Waynesville NC 28785

306
LOG TURNER
CORELY BAR TYPE  LOG TURNER; CONTROLS IN CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

307
HYDRAULIC UNIT
LOG TURNER HYDRAULIC PACK; 20 HP ELECTRIC MOTOR WITH HYDRAULIC PUMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

308
CORLEY CARRIAGE
16'X 48" CORLEY 3 HEAD BLOCK LINEAL POSITION CARRIAGE; INCLUDES 2004 LEWIS CONTROL READY SCAN 1 SYSTEM WITH DYNA VISION HEADS, CAB AND CONTROLS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

458
Log Trough
w-dual kickers. hyd. drive. heavy duty, approx. 24'

309
HYDRAULIC PACK
40 HP HYDRAULIC UNIT, MODEL AC-5-1-5AC, (S/N: 78700) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

310
CORLEY SHOT GUN FEED
2004 CORLEY SHOT GUN FEED SMA280C, MODEL 01504FLF4UMQ WITH 150 HP TOSHIBA MOTOR (SN: 0402103511) INCLUDES CONTROLS IN SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311
BAND MILL
MCDONOUGH 7' RIGHT HAND BANDMILL ; AIR STRAIN (SN: 84MA-164) 13" FACE, 1 1/8" THICKNESS RUNS 10" BLADE; INCLUDES 5' OFF BEARER BELT, THIS IS A VERY NICE UNIT! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311A
ELECTRIC WINCH
ELECTRIC WINCH FOR LIFTING BANDSAW BLADES (WINCH LOCATED NEXT TO DEBARKER CAB) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311B
LASER LIGHT AT SAW CAB
LASER LIGHT AT SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

312
MOTOR
250 HP TOSHIBA MOTOR UNDER BAND MILL/ FRAME#N587UZ; 1185 RPM; MODEL B2506FLF4BD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

313
SLAB DUMP
13'X31" BELT SLAB DUMP WITH OHIO GEAR REDUCTION DRIVE AND AIR CYLINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

314
ROLL CASE
36''X15' LIGNA MACHINERY ROLL CASE; 7 ROLLS;9" LIVE ROLLS WITH AIR STOP, HEAVY DUTY! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

315
ROLL CASE
25' ROLL CASE W/ 9 ROLLS (24"X7" ROLLS) WITH MORRIS GEAR MOTOR DRIVE; AIR STOP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316
GANG
2004 LIGNA 10X36" TOP ARBOR, THIN KERF GANG WITH 14' SELF POSITIONING INFEED CANT TURNER. (5 LIVE ROLLS, 3 POSITION CHAIN)INCLUDES (2) 200 HP MOTORS, CONTROLS IN CAB, MOTOR CONTROLS AS MARKED ON WALL, OUTFEED ROLL CASE, THIS MACHINE IS A VERY NICE MASS-PRODUCTION MACHINE!  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316A
Electric Motor
200 HP on Gang Saw.

316B
Electric Motor
200 HP on Gang saw.

317
SAW GUIDES AND SAWS FOR GANG
APPROX. 100 - 29.5" DIAMENTER SAW GUIDES AND SAWS FOR GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317A
IMW MODEL 24055 SAW GUIDE GRINDER
IMW MODEL 24055 SAW GUIDE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317B
BABBIT POT
BABBIT POT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317C
BABBIT MOLD FOR GUIDES
BABBIT MOLD FOR GUIDES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317D
ARBOR FOR LIGNA GANG
ARBOR FOR LIGNA GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317E
(4) SAW BLADE CARRYING BOXES
(4) SAW BLADE CARRYING BOXES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

318
TRANSFER DECK
4 STRAND 11'X11' POP UP TRANSER DECK WITH STOP AND LOAD; ELECTRIC MOTOR AND GEAR BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

319
CAB
60"X68" CAB; CONTROLS NOT INCLUDED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320
EDGER
NEW IN 2004 4''x36'' LIGNA MACHINERY EDGER 36' DEAD ROLLS, NO DRIVE; 19'X4" TAILING DEVICE; 2 MOVABLE SAW HYD. SET WITH 60 HP ELEC. MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320A
SAW BLADES FOR EDGER
(8) 17.5" DIAMETER SAW BLADES; (12) 9.5" DIAMETER SAW BLADES FOR EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

321
LASER LIGHTS
(2) FOREST LINE LASER LIGHTS; BRACKET WITH EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

322
TRANSFER DECK
9'X11' 4 STRAND TRANSFER DECK WITH ELECTRIC DRIVE; C55B ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

635
TRANSFER DECK
66' 3- STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

323
BELT CONVEYOR
25'X36" BELT CONVEYOR BELT; GEAR MOTOR DRIVE, NICE UNIT. ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

324
TRANSFER DECK
30'X11' 4 STRAND TRANSFER DECK, C55D ROOF TOP CHAIN W/ 2 SETS OF 4 ARM AIR STOPS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

325
TRANSFER DECK
LIGNA 11'X14' 9 STRAND TRANSFER DECK; C55 D ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

326
TRANSFER DECK
17'X11' 4 STRAND TRANSFER DECK; H78B ROOF TOP CHAIN/ GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

327
LUMBER DECK
21' 3 STRAND LUMBER DECK (2 STRAND H78 ROOF TOP CHAIN;1 STRAND H78 CHAIN) GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328
DROP SAW TRIMMER
22' CORLEY DROP SAW TRIMMER WITH 8 SAWS; 7.5 HP MOTOR ON SAWS WITH LASER LINE; 11' -7 OUT DECK WITH 181X CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328A
SAWS FOR CORLEY TRIMMER
(14) 25.5" DIAMENTER SAWS FOR CORLEY TRIMMER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

329
UNSCRAMBLER
 4 STRAND UNSCRAMBLER, GOOD CONDITION, WITH ELECTRIC DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

330
BELT CONVEYOR
25' BELT CONVEYOR; 24" BELT WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

331
GREEN CHAIN
110'X11' 4 STRAND GREEN CHAIN WITH H78 CHAIN; 5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

332
LUMBER CART
144" X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

333
LUMBER CART
147"X 43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

334
LUMBER CART
112"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

335
LUMBER CART
111"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

336
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

337
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

338
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

339
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

340
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

341
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

537A
PARKER SSD690 DRIVE MOTOR CONTROLS

342
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

343
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

344
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

345
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

346
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

347
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

348
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

349
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

350
LUMBER CART
72"X84" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

351
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

352
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

353
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

354
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

355
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

356
BELT CONVEYOR
26'X14" BELT CONVEYOR WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

357
BELT CONVEYOR
22'X24" BELT CONVEYOR WITH 16" BELT; GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

358
CHIPPER
PROGRESS MODEL 70 CHIPPER, ( SN: 001207) 8 KNIFE, BOTTOM DISCHARGE, NICE MACHINE! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359
MOTOR
TECO-WESTINGHOUSE 250 HP MOTOR, 1785 RPM, 449TZ FRAME ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359A
SOLID STATE REDUCED VOLTAGE STARTER
SQUARE D ALTISTART 46 250 HP SOLID STATE REDUCED VOLTAGE STARTER INCLUDES JUNCTION BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359B
CHIPPER KNIVES
CHIPPER KNIVERS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359C
BABBIT MOLD
BABBIT MOLD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

360
VIBRATING CONVEYOR
33'X18" BOTTOM 10" FLARED SIDES VIBRATING CONVEYOR INCLUDES 5' FIBERGLASS SECTION AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

361
MDI METAL DETECTOR
MDI METAL DETECTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

362
DRAG CHAIN
APPROX. 30' DRAG CHAIN UNDER CHIPPER, H-78 DRAG CHAIN WITH 7.5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

363
BELT CONVEYOR
32'X18" BELT CONVEYOR GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364
SHAKER SCREEN
7'X7' PROGRESS SHAKER SCREEN 2001; HYD. DRIVE, GOOD CON. SN 010031 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364A
Blower
Approx. 32” in dia. and has a 20 hp 3 phase motor and is in very good condition, uninstalled, Located at 4595 Jonathan Creek Road, Waynesville NC 28785

365
BELT CONVEYOR
20'X10" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

366
BELT CONVEYOR
20'X12" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

367
CONVEYOR
30' FINES CONVEYOR WITH H78 CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

368
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, GOOD CONDITION
(approx. 14 unit capacity) 12'X13'
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

369
CHIP CONVEYOR
APPROX. 80'X18" CHIP CONVEYOR WITH H78 DRAG CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

370
BELT CONVEYOR
70'X18" BELT CONVEYOR INCLUDED ALL APRON PLATES ATTACHED; MOTOR AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

371
BELT CONVEYOR
90' BELT CONVEYOR/8"WIDE/ 6" BELT GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

372
BELT CONVEYOR
45'X16" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

373
SHAKER SCREEN
36"X18" SAW DUST SHAKER SCREEN WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

374
DUST CONVEYOR
12'X12" PLEATED SAW DUST CONVEYOR;GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

375
BARN SWEEP CONVEYOR
CORNELL 35'X42 BARN SWEEP CONVEYOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

376
CONVEYOR
APPROX. 100' CONVEYOR WITH 110 LADDER BACK CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

377
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, THIS IS A VERY NICE BIN.
14'X16' (approx. 21 unit capacity)
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

378
AIR COMPRESSOR
INGERSOLL RAND SSR-3P75 AIR COMPRESSOR, 75 HP MOTOR (17704 HRS) CONTROLS AS MARKED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

379
AIR COMPRESSOR
SULLAIR LS-1250HACAC AIR COMPRESSOR WITH 50 HP MOTOR; CONTROLS ATTACHED TO DISCONNECT; NO SWITCHES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380
AIR TANK
RESERVE AIR TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380A
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

381
STAGE STARTER DISCONNECT
TOSHIBA SIZE 5 STAGE STARTER 600 AMP DISCONNECT, 460 VOLT, 60 KVAR CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

382
SOFT START
ALLEN BRADLEY SOFT START FOR 150 HP MOTOR; NO DISCONNECT WITH CIRCUIT BREAKER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

383
MOTOR CONTROL PANEL
MOTOR CONTROL PANEL WITH 7.5 KVAR INCLUDES SHUT OFF CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393A
6" VICE WITH ROLL AROUND METAL TABLE
6" VICE WITH ROLL AROUND METAL TABLE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

384
ELECTRIC SHUT OFFS
ELECTRIC SHUT OFFS AS MARKED (400-20 AMP) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393C
CHIPPER KNIVES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

385
STARTER
SQUARE D SIZE 4 STARTER WITH BUILT IN 225 AMP DISCONNECT. NO WIRE OR CONDUIT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393E
PERSONEL FAN
PERSONEL FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

386
CAPACITOR BANK
AUTOVAR 300 KVAR POWER CAPACITOR BANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393F
BOX FAN
BOX FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

387
ELECTRIC PANELS
ELECTRIC PANELS AS MARKED UNDER MILL ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

388
ELECTRIC PANELS
ELECTRIC PANELS UNDER MILL AND EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393D
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389A
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389B
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

390
DUST FILTER
DUSTKOP DUST FILTER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

391
HAMMERING STATION
ARMSTRONG HAMMERING STATION INCLUDES ARMSTRONG #5 STRETCHER ROLL (SN: 15842) HAMMERING BLOCK, STAND AND ROLLERS INCLUDES ARMSTRONG WELDING CLAMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

392
BLOCK GRINDER
MCDONOUGH GUIDE BLOCK GRINDER (SN: BDM655) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393
CHIPPER KNIFE GRINDER
HANCHETT CHIPPER KNIFE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393B
(8) 9.75" MCDONOUGH BAND SAW BLADES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394
DIP TANK
MONTICELLO 20' DIP TANK INCLUDES HYDRAULIC LIFT, SELF CONTAINED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394A
LUMBER DIPPING STATION FOR DIP TANK
LUMBER DIPPING STATION FOR DIP TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394B
4'X8' MAN LIFT PLATFORM
4'X8' MAN LIFT PLATFORM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394C
LIFTING EXTENSION FOR FORKLIFT
LIFTING EXTENSION FOR FORKLIFT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394D
Precision SHAKER SCREEN
6'X6' SHAKER SCREEN AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394E
AIR DRYER
Located at 4595 Jonathan Creek Road Waynesville NC 28785

394F
RESERVE AIR TANK
RESERVE AIR TANK LOCATED IN BACK SHOP AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

395
(14) ROLLS+B2:B17 5/8 GREEN STRAPPING

395A
MISC ROLLERS AND ELEC. MOTOR 10 HP

395A
Parts room and rack outside at J Creek

400
JOCAR HORIZONTAL BAND RESAW
JOCAR HORIZONTAL BAND RESAW 55" WHEELER, 8" FACE 1 1/8" THICKNESS, CHAIN FEED WITH 2 HYD. HOLD DOWN ROLLERS, PUSH BUTTON CONTROLS, DIRECT LOGIC 06 CONTROLLER. 5-6 3/4" BAND SAW BLADES, 100 HP MOTOR, 30 HP HYDRAULIC PACK AND CONTROLS AS MARKED, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

401
15' 4 STRAND DECK WITH H-78 CHAIN
15' 4 STRAND DECK WITH H-78 CHAIN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395B
SKID MISC CHAIN

402
16' INFEED ROLLCASE
16' INFEED ROLLCASE WITH 11-8X30" ROLLS, 3 AIR OPERATED OP UP CRADDLE TYPE TRUNERS EACH WITH THEIR OWN ELECTRIC DRIVE, ROLL CASE HYDRAULIC DRIVEN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

403
18' OUTFEED ROLLCASE
18' OUTFEED ROLLCASE WITH (8) 6X38" ROLLS, 4 CHAIN ARM JUMP UP TRANSFER AND 4 ARM SKATE ROLLE TIPPLE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395C
SKID MISC PULLEYS

404
DOUBLE SEPARATION SYSTEM
DOUBLE SEPARATION SYSTEM,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

405
4 STRAND TRANSFER DECK
4 STRAND TRANSFER DECK, H-78 CHAIN; DRIVE; 4 ARM JUMP UP TRANSFER,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395D
MISC CONVEYOR BELT

406
50' RETURN ROLLCASE
50' RETURN ROLLCASE WITH (25) 6X24" LIVE ROLLS, 4 ARM JUMP UP TRANSFER, HYDRAULIC DRIVE,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

407
LIGNA HYDRAULIC PACK
LIGNA HYDRAULIC PACK,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395E
4'X7' STEEL WELDING TABLE WITH VICE

408
TIE BACK OF 400-407 WITH A 10% RAISE
TIE BACK OF 400-407 WITH A 10% RAISE , Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

409
WEBSTER VIBRATING CONVEYOR
WEBSTER VIBRATING CONVEYOR MODEL 18/27, 18"X45’  10" FLARED SIDES, NO DRIVE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395F
OLDER LINCOLN WELDER-STICK

425
48" 3HD Salem Carriage
Linear positioning, Saw Cab W/ controls, weighs aprox 25,000 lbs, Good Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

426
Track & Frame
Approx 60' Track, 64" center to center, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395G
WALL OF SHELVES/MISC. BEARINGS/CHAIN

427
Tyrone-Berry 285 Hydraulic Feed
Tyrone-Berry 285 Shotgun Feed Carriage Drive with 150 hp Motor, 40' Cylinders, No Pump! Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

428
6' Prescott vertical Band Saw
12" blade, Weight Strain, Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395H
NEW DEBARKER BEARINGS AND WHEELS

429
INOVEC Light Curtain Scanner System
Comes with YieldMaster 386 control Box, Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

430
Tie Back
425,426, 427, 428, 429, Will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395I
SHELVES W/ MISC PIPE PARTS AND MIS MISC

431
7' Prescott Resaw
comes with Cab and controls, weight Strain blade tension, 10" blade, No.218-M.S. 8737, Fair Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

432
48" Corley Edger
52" x 12' infeed, 12" x 22' Tailing Belt, Missing Blades, Good Working Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

395J
WORKBENCH AND SHELF FULL OF MISC PARTS, GEAR BOXES, BEARINGS

433
Spiral Roll Case
30" x 8' Live Roll Case, Heavy Duty, Good Working Con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714

434
Roll Case
30" x 52' Live Roll Case, Heavy Duty, Good working con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714 

395K
SHELF W/ MISC SPROCKETS, CHAIN

435
Transfer Deck*
4-strand 10' long x 12' wide, electric drive 2hp motor, sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good working Condition

436
Transfer Deck*
4-strand 20' long x 10' wide, no drive, Sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, working Condition

395L
SHELVES OF NEW SPROCKETS, BEARINGS

437
Log Deck*
3-strand 34' long x 10' wide, 7 hp electric drive, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condion

438
Steel WalkWay*
30' x 20' x 60" high steel walkway 30" x 48" Platform with stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

395M
PILE OF HYDRAULIC HOSES

439
Steel WalkWay*
30" x 20' x 48" high, with two stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

440
Belt Conveyor*
36" x 12', no drive, sold off site at 249 banco sawmill rd Burnsville, NC 28714, working condition

395N
PARTS WASHER

441
Green Chain*
4-strand ,100' x 12' Heavy Duty, electric drive, has been partly disassembled. Sold off site at 249 banco sawmill rd Burnsville, NC 28714

442
Roll Case*
30" x approx 20', Live Roll Case, no drive, They are on the outside of the building, sold off site at 249 banco sawmill rd Burnsville, NC 28714, Good Condition

395O
COMPLETE ROOM OF CONTENTS, BELTS, BOLT BIN LOADED, BEARINGS

443
Bar Type Log Turner*
Good Working Condition, Sold off site at 1960 US 19E Burnsville,NC 28714

444
2009 Salsco 40" Shaving Mill*
2009 40" Salsco Shaving Mill, 127 hp Cat Engine, just under 2000 hrs, 3-Belt Conveyors , 15" x 10' , 15" x 20' and 30" x 30', everything is in excellent Condition, Will be sold off site at 2130 Fruitland Rd, Hendersonville, NC 28792, Sells with Reserve.

395P
SHELVES OF MISC/ BRAND NEW CHAIN

445
Extrema MXP-255 24" Planer
Double Surfacer, Helical Heads, Carbide Inserts, Digital Setworks, Power Thickness Controls, 30hp Top, 20hp bottem head, Manuals, tools, Extra Knives Included, bought new and running when removed 5/2020. will be sold off site. Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

446
Newman Whitney S-282 Planer*
18" Serial# 14433, Will be sold off site!, was never installed by owner, considers it for parts, Can be inspected at ;Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395Q
CABINET AND MISC WELDING RODS/LOADED

447
Easi 18' Lumber Conveyor System
24" wide, w/new belt, 1hp motor, infeed to Planer, will be sold off site, Good Working Condition. Can Be Inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

448
2004 Invicta Sliding Table Shaper
TI-14 v.04, Pro Scale Digital Readout for spindle adjustment, Movable spindle used for End Matching Flooring, Will be sold off site, Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone # 828-926-1621

395R
WORKBENCH AND ALL TOOLS/MISC ON BENCH

448A
2004 Invicta Sliding Table Shaper

449
Denailing Punch Machine
2004 OSHA Guarded Hands Free Punch for Denailing Boards, Will be sold off Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395S
SHELVES FULL OF MISC MILL PARTS

450
Tennant 255 Floor Sweeper
Propane, Rider, Serial# HD-1543, low hrs 3998. Will be Sold OFF Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

451
2- Pallets of assorted Motors and Gear Boxes
Browning helical reducer with 3hp motor, High Efficiency Motor, 40 hp, 3 pieces each, motor and gear reducer units, Will BE SOLD OFF SITE!, Good Working Condition. Can be inspected at ; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395T
DEBARKER HEAD

452
Corley Carriage*
3 HB, sells w-62' of track, frame, drive and Berry feed, serial # 30-TD-042 sells with lots of new parts. 

2020
VOLVO L120 ARTICULATING LOADER
WHEEL LOADER (SN: VCEL120HJ0S632242) 4117 HOURS, KILL SWITCH, FULLY ENCLOSED, 23.5R25 TIRES, CLIMATE CONTROLLED CAB,

453
Air Tek Dryer
Serial # 0403 Model # JL1000FHT, 200 PSI, w-control center and service disc. very nice unit.

395U
STEEL RACK

454
Air Dryer Ingersoll Rand
Serial # 892HG1148 Model # HG201E5 was working well when taken out of production.

455
CompAir Compressor
50 HP Ser. # 2HB 546823 Mod. # 218 nice unit.

456
Millermatic 250 Welder
wire welder. No tank.

457
Miller Arc Welder
Model SRH-333, electric

457A
Screw Air Compressor*
50 hp electric motor

500
LOG DECK
THURSDAY AUCTION STARTS HERE
24'X12' - 4 STRAND, 5 ARM STOP & LOADER; INCLUDES 1ST HORIZONTAL SUPPORT BEAM, 20 HP GEAR MOTOR DRIVE, BUILT TO LAST AND IN GOOD CON. 
The first of an entirety.

501
LOG TROUGH
28'  WITH 120 LADDER BACK CHAIN, W-ELECTRIC DRIVE

502
NICHOLSON A6 RING DEBARKER
 SIZE 35" AC LEFT HAND, CHAIN FEED (SN N7631), MFG: 2010 SYDNEY, BRITISH COLUMBIA; INCLUDES 30 HP HYDRAULIC PACK, 100 HP TECO WESTINGHOUSE MOTOR, 30 HP MOTOR FOR INFEED, CONTROLS IN CAB AS MARKED, ONE OWNER! SERVICED BY NICHOLSON, THIS IS RARE OPPORTUNITY!! VERY NICE MACHINE.

502A
ALLEN BRADELY STARTER
100 HP SMC-FLEX SOFTSTART STARTER CUTLER HAMMER, 150 AMP DISCONNECT. DOES NOT INCLUDE CABINET. NO WIRE OR CONDUIT INCLUDED

503
LOG TROUGH
29', OUTFEED WITH 120 LADDER BACK CHAIN, 4 ARM LOG KICKER; S CONSTRUCTION DRIVE, 10HP GEAR MOTOR DRIVE

504
TIE BACK
OF LOTS 500-503 TOGETHER WITH 10% RAISE

504A
Nicholson Debarker Parts
Brand New

504B
Cyclo 6000 Gear Box
Brand New! Serial KY0030270
Will fit on Nicholson debarker for log infeed/outfeed.

505
LOG DECK
39'X12' 4 STRAND, STOP & LOADER WITH W82 CHAIN, 20HP MOTOR, FAULK GEAR BOX, SUPPORTS TO 2ND HORIZONTAL BEAM

506
HMC ROSSERHEAD DEBARKER
42'' HEAVY DUTY, 60 HP ELECTRIC MOTOR; SELF CONTAINED HYDRAULIC SYSTEM, SLANT TRACK, CONTROL CHAIR IN CAB AS MARKED. NO SUPPORT STEEL, THIS DEBARKER IS IN VERY GOOD CONDITION.

506A
ALLEN BRADELY STARTER
SIZE 3, CUTLER HAMMER 150 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED.

507
LOG DECK
16'X11' - 4 STRAND WITH W 82 CHAIN, GEAR MOTOR DRIVE. NO SUPPORT STEEL

508
LOG TROUGH
30' WITH 120 LADDER BACK CHAIN, S DRIVE CONTRUCTION, 10 HP GEAR MOTOR DRIVE. NO SUPPORT STEEL

509
FORTRESS LOG METAL DETECTOR
48"X48"; 23' RENS FIBERGLASS SECTION WITH BELT, TAKES 48" LOG, INCLUDES CONTROLS AS MARKED IN CAB, 10 HP GEAR MOTOR DRIVE. SUPPORT TO 1ST HORIZONAL I BEAM

510
LOG TROUGH
55' SALEM, 5 ARM REJECT LOG KICKER OUTSIDE OF BUILDING, 2 SETS OF 5 ARM LOG KICKER INSIDE BUILDING FOR 2 WAY LOG DISTRIBUTION. INCLUDES SLIDE PLATE AND BIN FOR REJECT LOGS. STEEL SUPPORT TO GROUND AS MARKED. EXTREMELY HEAVY DUTY AND IN EXCELLENT CONDITION.

511
BARK CONVEYOR
65' X 18", UNDER NICHOLAS DEBARKER WITH 110 LADDER BACK DRAG CHAIN, 10 HP GEAR MOTOR DRIVE. 6" SUPPORT BEAMS ONLY

512
BARK CONVEYOR
32', UNDER HMC DEBARKER WITH 110 LADDER BACK CHAIN

513
BARK CONVEYOR
80' , WITH DUAL 110 LADDER BACK CHAIN, 20 HP GEAR MOTOR DRIVE. TO THE HOG 6" SUPPORT LEGS ONLY

514
SALEM GRINDER
24'X30",  BOTTOM DISCHARGE INCLUDES HOPPER. NO MOTOR. NO SUPPORT STEEL.

514A
PALLET OF SWINGING HAMMERS FOR HOG

515
TECO WESTINGHOUSE MOTOR
150 HP ELECTRIC. FRAME 445T, RPM 1775

515A
ALLEN BRADLEY SOFT STARTER
SMC-FLEX 150 HP SOFT START STARTER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

516
DUAL TRAILER LOAD OUT SYSTEM
WITH 36' AUGER SYSTEM, AIR OPERATED DIVERTER CHUTE. SUPPORT TO GROUND, SUPPORT STEEL UNDER BARK SYSTEM

2042
NEW SHOP BUILT 8'X20' DIP TANK WITH LIFT
NEW SHOP BUILT 8X20' DIP TAND WITH LIFT. NO HYD. PACK

517
BARK CONVEYOR
APPROX. 90' WITH 110 LADDER BACK CHAIN, TO TRAILER LOAD SYSTEM, 20 HP GEAR MOTOR DRIVE, 

518
MISC. ELECTRIC BOXES
AT HOG SYSTEM (2) 20 AMP, (2) 30 AMP, NO WIRE OR CONDUIT INCLUDED

519
SUPPORT STEEL
UNDER HOG AND BARK CONVEYOR AS MARKED

520
SUPPORT STEEL
UNDER DEBARKER SYSTEM, CATWALK AS MARKED, STEEL PLATES AS MARKED

521
RESERVE TANK
RESERVE AIR TANK AT METAL DEDECTOR

522
CAMERA SYSTEM
WITH ## CAMERAS, VISIO DISPLAY

523
ALLEN BRADLEY ELECTRICAL
SYSTEM IN SALEM BOX IN SAWYER'S CAB

524
ALLEN BRADLEY ELECTRICAL
PANEL AS MARKED

525
SAWYER'S CAB
(12'X8') CLIMATE CONTROLLED AT DEBARKER

526
ALLEN BRADLEY ELECTRICAL
MCC 800 AMP PANEL INCLUDES TRANSFORMER AND DISCONNECT BUT DOES NOT INCLUDES STARTERS AS MARKED

527
ALLEN BRADLEY POWER FLEX
700 VARIABLE FEED DRIVE

528
ALLEN BRADLEY STARTER AND DISCONNECT
SIZE 2

529
CONTROL BOXES AS MARKED
.

530
STEEL BUILDING
8'X10',  AT DEBARKER SHED

531
SAFETY SWITCHES
(8) MISC SAFETY SWITCHES

532
HYDRAULIC PACK
FOR PARTS WITH 30 HP MOTOR AND ELECTRICAL ATTACHED

533
OPEN SPAN BUILDING
30'X50' PREFAB, OVER DEBARKER INCLUDES LIGHTS

533A
LOG SPRINKLER SYSTEM
LOG SPRINKLER SYSTEM TO INCLUDE 60 HP WATE PUMT AT POND AND DISCONNECT AS MEARKED; (3) SPRINKLER HEADS AND STANDS AS MARKED ON YARD, SPRINLER HEAD ON PALLET AS MARKED

534
LOG DECK
28'X12' 3 STRAND HEAVY DUTY LOG DECK WITH CHAIN, 20 HP GEAR MOTOR DRIVE, 4 ARM STOP AND LOADER. SUPPORTS TO HORIZONTAL BEAM

535
SALEM BAR TYPE LOG TURNER
(SN: 19910 04) INCLUDES 30 HP. SALEM HYDRAULIC PACK, CONTROLS IN CAB.
The first of an entirety.

536
SALEM CARRIAGE
3  HEAD BLOCK LINEAL POSITION VERTICAL SLANT CARRIAGE (16') (SN: 201541-05) ,INCLUDES 60' TRACK AND CRUY END BUMPERS, CABLE TIGHTENER. CLIMATE CONTROLLED SAWYERS CAB (12'X5')

536A
MASS SETWORKS
MASS SETWORKS TO INCLUDE CONTROLS IN CAB AND SCANNER ABOVE CARRIAGE, late model!

537
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES PARKER SSD690 DRIVE MOTOR CONTROLS
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES  PARKER SSD690 DRIVE MOTOR CONTROLS  
INCLUDES WIRE FROM MOTOR TO STARTER.

538
SALEM BAND MILL
6’ RIGHT HAND VERTICAL SLANT BAND MILL (SN: R12798987); AIR STRAIN, 11" FACE, 1 1/4 THICKNESS

539
WEG NEMA PREMIUM MOTOR
1191 RPM, 200 HP, FRAME 504, NO MOTOR CONTROLS INCLUDED

539A
SQUARE D SIZE 6 STARTER
.

540
SLAB DROP
12" X 32", WITH 4 ARM AIR OPERATED EASE OFF

541
TIE BACK
OF LOTS 535-540 WITH 10% RAISE

541A
NEW DRUM SHEAVE FOR CARRIAGE DRIVE*
NEW DRUM SHEAVE FOR CARRIAGE DRIVE, Was Lot 537B

542
ROLLCASE
30', WITH (11) 30'X9" ROLLS, NO DRIVE, AIR STOP. (4) 4 ARM POP UP CHAIN ( BREAK CHAIN- NO SPROCKET)

543
ROLLCASE
20', WITH (7) 30" X9" ROLLS, 7.5 HP GEAR MOTOR DRIVE WITH 6' 4 STRAND POP UP TRANSFER, AIR STOP, GEAR MOTOR AND DRIVE

544
LOG DECK
12'X34' 4 STRAND, 5 ARM STOP AND LOADER, 20 HP GEAR MOTOR DRIVE; SUPPORTS TO HORIZONTAL BEAM

545
COOPER SCRAGG
END DOGGING SCRAGG, WITH COOPER COMPUTERIZED SETWORKS, (2) 150 HP MOTORS, CAB AND CONTROLS AS MARKED. INCLUDES (2) 56" F7 SAWS ON MACHINE

545A
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545B
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545C
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545D
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545E
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

546
(2) WEG SOFT START STARTERS
SSW 07, STARTERS FOR 150 HP MOTOR

547
ALLEN BRADLEY ELECTRICAL
1200 AMP CENTER LINE MCC PANEL. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

548
ROLLCASE
14', WITH 8 (74"X9") ROLLS; 5 AIR OPERATED JUMP UP TRANSFER CHAINS (9').

549
COOPER TRANSFER DECK
10'X14', SLANT BED, GEAR MOTOR DRIVE.

550
ROLLCASE
17', WITH 8 (54"X8") SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

551
ROLLCASE
24', WITH 9 (30"X8") (5 ROLLS ARE SPIRAL) ROLLS WITH 1 AIR STOP. GEAR MOTOR DRIVE

552
ROLLCASE
43', WITH 15 (30"X9") (10 ROLLS ARE SPIRAL) ROLLS GEAR MOTOR DRIVE

553
TRANSFER DECK
14'X9' - 4 STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

554
BELT CONVEYOR
23', WITH 20" BELT. GEAR MOTOR DRIVE

555
ROLLCASE
28', WITH 10 (36"X8") ROLLS, GEAR MOTOR DRIVE

556
SAW CRANE
WITH PETERSBURG ELECTRIC WINCH

557
LUMBER TRANSFER DECK
22'X11'- 5 STRAND, WITH H78A ROOF TOP CHAIN. 3'- 5 STRAND TIPPLE, 5 HP GEAR MOTOR DRIVE. SUPPORT TO HORIZONTAL BEAM
The first of an entirety.

557A
GRAVITY ROLL CASE
8'X18" GRAVITY ROLL CASE

558
LUMBER TRANSFER DECK
20' - 5 STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, 5 HP GEAR MOTOR DRIVE. 4'- 5 STRAND POP UP TIPPLE DEVICE. SUPPORTS TO HORIZONTAL BEAM

559
SALEM LUMBER TRANSFER DECK
18'X11' 4 STRAND, WITH H78 CHAIN, AIR STOP PINS, 4 ARM STOP AND LOADER, GEAR MOTOR DRIVE.

560
SALEM INFEED
13' INFEED TO HORIZONTAL RESAW. 5 (34"X9") ROLLS, 6'- 4 STAND TRANSFER DECK, POP UP CANT TURNER, 4 ARM CANT KICKER

561
SALEM BAND RESAW
2004, 6', RIGHT HAND HORIZONTAL, (SN: 198096R04) FACE 11', THICKNESS 1 3/8"; INCLUDES CONTROLS IN CAB AND CAB. 25 HP HYDRAULIC PACK, WORKS FOR 3 OR 4 SIDED. ALSO MADE TO CONVERT TO A HEAD RIG!
VERY GOOD SAW.

562
WORLD WIDE INDUSTRIAL ELECTRICAL MOTOR
200 HP, 449T, 891 RPM

562A
ALLEN BRADLEY SOFT START
SMC-FLEX SERIES B, MAX 250 HP, SOFT START STARTER WITH CUTLER HAMMER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

563
SALEM OUTFEED
20' OUTFEED ROLLCASE WITH 9 (36"X9") ROLLS INCLUDES (5) 6' AIR POP UP TRANSFER CHAIN, HYDRAULIC DRIVE, AND POP UP BOARD STOP

564
SALEM TRANSFER DECK
12' X 25' 5- STRAND, WITH H78 CHAIN; 5 STRAND SCAPE ROLL INCLUDES 3 WAY SORT

565
BELT CONVEYOR
32', WITH 30" BELT, GEAR MOTOR DRIVE. INCLUDES LEGS TO GRADING

566
TIE BACK
OF 557-565 WITH 10% RAISE

567
SALEM TRANSFER DECK
16'X12', GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

568
BELT CONVEYOR
18', WITH 30" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

569
BELT CONVEYOR
40', WITH 28" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

570
SALEM TRANSFER DECK
27'X11' 4 STRAND LUMBER, WITH H78 CHAIN, SMCYCLO GEAR MOTOR DRIVE

571
TRANSFER DECK
36'X11' 4 STRAND, WITH H78B ROOF TOP CHAIN, SMCYCLO GEAR MOTOR DRIVE

574E
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574D
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

572
TRANSFER DECK
31'X13' 7-STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

573
BAR TYPE UNSCRAMBLER
18'x 5', WITH 18' EVENENDER ROLLS

574
BAXLEY EQUIPMENT EDGER
2011, COMPANY HIGH SPEED OPTIMIZED EDGER SYSTEM TO INCLUDE BUT NOT LIMITED TO: 25' INFEED LUMBER DECK SYSTEM WITH (7) 2' JUMP UP TIPPLES, 7' 8-STRAND TRANSFER WITH 3 SETS 8-ARM LUMBER STOPS, GEAR MOTOR DRIVE, 16' 8-STRAND LUMBER TRANSFER WITH GEAR MOTOR DRIVE, EVENENDER ROLLCASE AND (7) (60"X6") ROLLS, GEAR MOTOR DRIVE, BAXLEY LUMBER SCANNING SYSTEM WITH DYNAVISION LASER TECHNOLOGY, ALL SOFTWARE AND COMPUTERS. BAXLEY 20'HIGH SPEED INFEED WITH SHARP CHAIN, (4) HYD. HOLD DOWN ROLLS. BAXLEY HIGH SPEED 3 GUIDED SAW HIGH SPEED EDGER, 250 HP MOTOR. BAXLEY 22'X48" OUTFEED BELT CONVEYOR, GEAR MOTOR DRIVE. 25 HP HYD. PACK, COOLING AND CLEANING FAN FOR LASERS. NO MAIN MOTOR CONTROLS. COMPLETE PACKAGE IN GOOD CONDITION! ONE OWNER!

574A
ALLEN BRADLEY SOFT START STARTER
SMC-FLEX SERIES B 300 HP MAX, WITH CABINET INCLUDES GE 400 AMP SWITCH

574B
ALLEN BRADLEY CENTER LINE
MCC PANEL

574C
SAWS AND SAW GUIDES
SAW GUIDES AND SAW BLADES.

574d
Sheffer air cylinder
48” air cylinder for Baxley Edger in feed

574DD
SHEFFER AIR CYLINDER
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574e
Mitsubishi Air condition unit
Mitsubishi Mr Slim E410A split unit air conditioner

575
BELT CONVEYOR
18', WITH 42" BELT, SUMITOMO GEAR MOTOR DRIVE

576
TRANSFER DECK
42'X13' 6-STRAND LUMBER, (5 STRANDS WITH C55D CHAIN), SMCYCLO GEAR MOTOR DRIVE

577
BELT CONVEYOR
32', WITH 24" BELT, SUMITOMO GEAR MOTOR DRIVE

578
SALEM TRANSFER DECK
13'X10.5' 4-STRAND LUMBER, WITH H78 CHAIN, 4 AIR STOPS, GEAR MOTOR DRIVE

579
SALEM TRANSFER DECK
16'X11' 4-STRAND,  WITH H78B CHAIN, 4 BAR STOP AND LOAD, SMCLCLO GEAR MOTOR DRIVE

580
SALEM COMBINATION GANG/EDGER
10", 18" GANG SIDE, 32" EDGER SIDE, 10" TOP OF BLADE TO SHAFT. INCLUDES INFEED, CANT POSITIONING ROLLER, CANT TURNER, WITH LIVE LINE BAR, LASER LIGHT GUIDE SYSTEM (NO LASER LIGHTS) (SN: 69890-95) DOES NOT INCLUDE MAIN ARBOR MOTORS. DOES INCLUDE HYDRAULIC UNIT AND OILING SYSTEM

580A
FILE ROOM SAW GUIDES FOR GANG
SAW GUIDES FOR GANG AND MAINTENANCE PARTS IN FILE ROOM

580B
SAFETY SWITCHES
(2) 100 AMP SAFETY SWITCHES; (1) 30 AMP SAFETY SWITCH

581
LAHARCO LASER LIGHT
(1) 

582
LAHARCO LASER LIGHT
(1) 

583
150 HP MOTOR
HIGH EFFICIENCY, 1775 RPM, 444T FRAME

584
BALDOR 150 MOTOR
150 HP ELECTRIC, 1780 RPM, 445T FRAME. NO MOTOR CONTROLS

585
ROLLCASE
26', WITH 10 (25"X6") ROLLS, 3 HP GEAR MOTOR DRIVE

585A
DAYTON 30 KW HEATER

585B
SCHAFFER 4X4' BOX FAN

586
TRANSFER DECK
15'X13' 5-STRAND,  (4 STRAND: H78B CHAIN, 1 STRAND H78 CHAIN), GEAR MOTOR DRIVE

587
SALEM UNSCRAMBLER
13' WIDE, BAR CHAIN TYPLE, SMCYCLO GEAR MOTOR DRIVE

588
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

589
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

590
BUCHER HYDRAULIC PACK
12 VOLT HYDRAULIC POWER PACK INCLUDES 12 VOLT BATTERY. MODEL: M3551-0219 AND CONTROLS

591
PUSH BUTTON CONTROL PANEL
(3) 30 AMP SAFETY SWITCHES

592
ROLLCASE
18',  8 (24"X7" SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

593
BELT CONVEYOR
34', WITH 24" BELT, SMCYCLO GEAR MOTOR DRIVE; 11' PARTIAL INCLINE, STEEL SUPPORT TO FLOOR

594
BELT CONVEYOR
24', WITH 30" BELT, SMCYCLO GEAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

595
BELT CONVEYOR
34', WITH 17" BELT, SMCYCLO GREAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

596
TRANSFER DECK
34' - 4 STRAND, WITH 81X CHAIN, 4 ARM STOP. GEAR MOTOR DRIVE

597
ROLLCASE
25', CONVEYOR 12 (20"X9" ROLLS. NO DRIVE

598
BREWER DOUBLE ARBOR GANG
MODEL BR-81245-P (SN: 113090) WITH SIZER HEAD, CONTROL BOX. 12' INFEED ROLLCASE 13(27"X5") ROLLS (NO DRIVE). INCLUDES HYDRAULIC PACK, 10 HP MOTOR, 60 HP TOP ARBOR, 100 HP BOTTOM ARBOR, 50 HP SIZER HEAD. WITH MOTOR CONTROLS AS MARKED. THIS UNIT IS IN CLOSE TO NEW CONDITION!

598A
ROLL AROUND TABLE
30"X60" ROLL AROUND TABLE

599
OUTFEED ROLLCASE
14', WITH 8 (24" X6" ) ROLLS. GEAR REDUCTION DRIVE

600
SAWS AND SPACERS
FOR GANG

600A
(3) ROLLS OF BELT

600B
ROLL 600 VOLT WIRE

601
SALEM BELT CONVEYOR
78', WITH 29" BELT. GEAR MOTOR DRIVE

602
LUMBER TRANSFER DECK
65'X13' 6-STRAND, WITH C550 ROOF TOP CHAIN. SYCYCLO GEAR MOTOR DRIVE

603
POP UP TRANSFER DECK
24'X11.5' 4-STRAND, WITH H78C CHAIN, S DRIVE CONSTRUCTION, 1 DRIVE, 1 SHAFT, NO TAIL SHAFT WITH DRIVE
The first of an entirety 

604
POP UP TRANSFER DECK
18' TRANSFER ROLLCASE WITH (36"X10") ROLLS WITH 6' 4 STRAND POP UP TRANSFER, 1 SHAFT, BREAK CHAINS AT 605

605
SALEM TRANSFER DECK
27'X11' 4-STRAND, WITH H78 CHAIN AND (7) 3 ARM AIR STOPS, SENSOR EYES, S DRIVE CONSTRUCTION, GEAR MOTOR DRIVE, NO TAIL SHAFT

606
SALEM LIVE LINE BAR INFEED
20'WITH 7 (36"X10") ROLLS. 4 ARM POP UP EVENENDER ROLLS TRANSFER, CANT TURNER, 4 POP UP CANT HOLDERS

607
SALEM LEFT HAND LINE BAR RESAW
6',  (SN L15286681) 11" FACE, 1 1/8" THICKNESS ON WHEELS, 8' LIVE LINE BAR, AIR STRAIN, NO MAIN MOTOR, NO HYDRAULIC SUPPLY

608
SALEM OUTFEED
18' ROLLCASE WITH 7 (54"X9") ROLLS. DUAL 4 STRAND POP UP TRANSFER CHAINS

609
150 HP MOTOR
(NO TAG EXACT HP UNKNOWN; RUNS RESAW)

609A
ALLEN BRADLEY SMC FLEX SOFT START STARTER
SERIES A STARTER WITH CUTLER HAMMER 400 AMP DISCONNECT AND CABINET. MAXIMUM 200 HP

610
SALEM HYDRAULIC PACK
30 HP MOTOR AND 10 HP MOTOR WITH PUMP

611
TRANSFER DECK
6'X11' 4 STRAND, GEAR MOTOR DRIVE. NO TAIL SHAFT

612
TRANSFER DECK
3'X10.5, WITH 3' TIPPLE; GEAR MOTOR DRIVE

613
SALEM TRANSFER DECK
19' X11L5', 4 STRAND WITH (4) 4 ARM LUMBER STOPS WITH ELECTRIC EYES, 3' TIPPLE, SMCYCLO GEAR MOTOR DRIVE

614
POP UP ROLLCASE
15' WITH 6 (30"X9") ROLLS, AIR POP UP. GEAR MOTOR DRIVE

615
ROLLCASE
16', 7 (30"X9") ROLLS, ELECTRIC EYES TO STOP, SMCYCLO GEAR MOTOR DRIVE

616
POP UP ROLLCASE
13', WITH 6 (30"X9") ROLLS, AIR CYLINDER POP UPS

617
TIE BACK
OF LOTS 603-616 WITH A 10% RAISE

618
ROLLCASE
25', WITH 9 (54"X7") ROLLS. GEAR MOTOR DRIVE. STEEL TO FLOOR

619
TRANSFER DECK
24'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

620
TRANSFER DECK
25'X13' 5-STRAND TRANSFER DECK WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

621
TRANSFER DECK
25'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

622
SALEM UNSCRAMBLER
14' WIDE

623
CARBOTECH TRIM SAW
INTERNATIONAL 22' TRIM SAW MACHINE #10-214-110, 17 SAWS, WILL INCLUDE INFEED SECTION WITH 9'X22' EVENER ROLLCASE, EXCELLENT CONDITION.
The first of an entirety. 

623A
SALEM BELT CONVEYOR
24'x 30" BELT, GEARMOTOR DRIVE, UNDER TRIM SAW

624
BAXLEY OPTIMIZING SCANNER
22' PASS, INCLUDES HYDRAULIC PACK. DYNA VISION, SCANNERS WITH COMPUTERS/SOFTWARE IN OPERATOR'S OFFICE, COOLING AND CLEANING BLOWER IN BASEMENT AS MARKED, THIS UNIT IS IN EXCELLENT CONDITION!

625
LUCIDYNE TECHNOLOGIES GRADE MAR READER
WITH CONTROLS IN ELECTRICAL ROOM, COMPUTER SYSTEM AS MARKED

626
TRANSFER DECK
As marked.

2021
VOLVO MODEL 82041 7 METER BUCKET
(SN: 7024-00420) QUICK COUPLER

627
INFEED OVERALL SECTION
42', INCLUDES SALEM SPIRAL ROLLCASE WITH 6 (5'X12") ROLLS; GEAR MOTOR DRIVE TO A 6' TRANSFER LUG LOADER ; INCLUDES 26' LUGGED TRANSFER DECK (NO TAILING SHAFT)

2022
QUICK COUPLE "R" LOG FORK WITH BALE CLAMP
 6' 

628
TIE BACK
TOGETHER 623-627 WITH 10% RAISE, ALL IN EXCELLENT CONDIITON.

629
TRIM SAW OUTFEED
17'X14', WITH 6 STRAND LUGGED TRANSFER 9'X7" EVENER ROLLS, 3' 8-ARM TIPPLE. INCLUDES HYDRAULIC PACK FOR EVENER ROLLS
The first of an entirety.

630
BELT CONVEYOR
20', WITH 29" BELT. GEAR MOTOR CONTROLS

631
TRIM SAW BLADES
(25) RESHARPENED ON WALL. 22" BLADES

632
HI-TECH J-BAR SORTER
42 (4') BINS. INCLUDES HYDRAULIC PACK, ROOF SYSTEMS ATTACHED, CONTROLS IN ELECTRIC ROOM AS MARKED, ATTACHED CATWALK

633
TRANSFER DECK
60' 3-STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

634
TRANSFER DECK
70' 3-STRAND,  WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

635
66' 3 STRAND DECK WITH H-78 CHAIN
66' 3 STRAND DECK WITH H-78 CHAIN, S DRIVE CONSTRUCTION, SMCLCLO GREAR REDUCTION DRIVE

636
HI TECH 8' STICKERING STACKER
HI-TECH 8' STICKERING STACKER INCLUDES BUT NOT LIMITED TO 20'X12' 5 STRAND PACKAGE DECK, GEAR REDUCTION DRIVE; H78 CHAIN, NO TAIL SHAFT; 8'X15' 8 STRAND WATERFALL UNSCRAMBLER; EVEN ENDER ROLLS; 5 ARM-8' STICKERING STACKER UNIT; STICKERING STATION, 20'X8' ELEVATOR ROLLCASE

637
40'X8' OUTFEED PACKAGE ROLL OUT WITH DRIVE

638
35' - 5 STRAND PACKAGE DECK
35' -5 STRAND PACKAGE DECK; S DRIVE CONSTRUCTIONS, GEAR MOTOR DRIVE; H78 CHAIN, MOTOR CONTROLS, 75 HP HYD PACK, SALEM 10 HP HYDRAULIC PACK

639
TIE BACK
OF LOTS 629-638 WITH A 10% RAISE

640
MASTER TIE BACK
Lots 628 & 639 
(everything from lot 623 thru 639) 

645
FULGHUM 8 KNIFE
66' 8 KNIFE HFVD (SN: FL-F1L-1702) INCLUDES 2 HP HYDRAULIC PACK FOR CYLYNDAR HOOD LIFT, DISCHARGE PIPE TO CYCLONE. NO MOTOR

645A
CHIPPER KNIVES , HOLDERS AND ANVILS
Will include all knives at and around chipper and inside box

646
TECO 300 HP MOTOR
1780 RPM. BELT STAYS WITH CHIPPER

647
ALLEN BRADLEY SOFT STARTER
300 HP STARTER NO WIRE OR CONDUIT INCLUDED

648
SALEM SHAKER SCREEN
8'X8'

649
8' CYCLONE
NO PIPE

649A
PUSH BUTTON CONTROL STATION FOR CHIPPER SYSTEM
.  

650
BARN SWEEP CHIP CONVEYOR
44'X 6' (26'FLAT, 18' INCLINE); GEAR MOTOR DRIVE

651
CONCAVE BELT CONVEYOR
26', WITH 36" TWEETED BELT. INCLINE AND LEGS INCLUDED. GEAR REDUCTION DRIVE

652
CONCAVE BELT CONVEYOR
110', WITH 36" TWEETED BELT. GEAR REDUCTION DRIVE

653
CONCAVE BELT CONVEYOR
96', WITH 24" TWEETED BELT. GEAR REDUCTION DRIVE

654
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK (LARGEST OF 3)
Approx. 30 unit capacity

655
US METAL WORKS CHIP BIN
NO HYDRAULIC PACK (MIDDLE)
Approx. 21 unit capacity.

656
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK
Approx. 21 unit capacity.

657
CAROLINA BLOWER COMPANY BLOWER
SIZE 70-6EHD (SN 5786) NO PIPE

658
DUST PIPE WITH STAND
APPROX. 275' OF 29" DUST PIPE WITH STAND AND ALL ELBOWS TO CYCLONE

659
CYCLONE
12', WITH AIR LOCK. NO PIPE

660
WEBSTER VIBRATING CONVEYOR
57',  24" BOTTOM, 10" FLARED SIDES. INCLUDES 12' SCREEN SECTION, 5' FIBERGLASS SECTION, 10 HP DRIVE MOTOR CONTROL, AND CHIPPER CHUTE

661
MDI METAL DETECTOR
.

662
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

663
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
64' WEBSTER VIBRATING CONVEYOR 24" BOTTOM, 10" FLARED SIDES. 10 HP MOTOR DRIVE

663A
Webster Vibrating Conveyor
40' x 24" bottom, 10" flared sides, 5 hp electric drive

664
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
55', 24" BOTTOM, 10" FLARED SIDES. 15 HP MOTOR DRIVE

1054
MARYVILLE AERIAL WORK PLATFORM
1999,MODEL 2033ES, 20' HEIGHT, MAX WEIGHT 750LBS24 VOLTS; (SN: 08802318)
 

665
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
45', 18" BOTTOM, 10 " FLARED SIDES. 3 HP MOTOR DRIVE

1018
TAYLOR MODEL REP-2505 (SN: 5-HS-21948) 25,000 LB CAPACITY, 8'X12" WIDE FORK, SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 19 HRS, SO WILL ESTIMATE 10,091 HRS. CUMMINS ENGINE (OIL CAP MISSING) DUAL FRONT TIRES 10: 00-20 (1-90%, 1-30%, 2-10%) REAR TIRES (1-100%, 1-80%)

666
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
30', 18" BOTTOM, 7" FLARED SIDES. 3 HP MOTOR WITH CUT OFF

1019
TAYLOR MODEL TE250M (SN; H5-21723) 25,000 LB CAPACITY 7'X8" FORKS SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 2357 HRS, CUMMINS ENGINE DUAL 10: 20 TIRES ON FRONT(2 FRONT: 80%, OTHER 2 20%) (REAR: 60%)

667
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
70', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

668
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
20', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

669
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE WITH CUT OFF

670
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
40',  24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

671
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
82', 18" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

672
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
69', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

1023
HYSTER H1100XL 10,000 LB FORKLIFT (SN: F006016061) (NO PLATE FOR SN) 6'X6" FORKS
MACHINE SHOWING 981 HOURS. PERKINS MODEL 1004 ENGINE DUAL FRONT TIRES 8-25-15 (20%)

673
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
75', 24" BOTTOM, 10" FLARED SIDES. 20 HP MOTOR DRIVE

674
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
50', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
44', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675A
VIBRO MODEL SP-200 VIBRATING MOTOR

675B
Webster Vibrating Conveyor
10ft section, brand new

676
SAW DUST CONVEYOR
13', UNDER VERTICAL RESAW WITH 110 LADDER BACK CHAIN. GEAR MOTOR DRIVE

677
QUINCY AIR COMPRESSOR
MODEL QSI500, 100 HP MOTOR, COOLING FAN, 200 AMP SAFETY SWITCH

678
SULLAIR AIR COMPRESSOR
20-150LACAC24KT WITH 150 HP MOTOR, 400 AMP SAFETY SWITCH

679
SULLAIR AIR COMPRESSOR
MODEL VCC-2005 VARIABLE CAPACITY, 150 HP MOTOR, 400 AMP SAFETY SWITCH

680
PNEUMATICH HEATLESS AIR DRIER SYSTEM
MODEL EH750

681
HANKISON AIR DRIER SYSTEM
HHE-450 AIR DRIER SYSTEM UNDER CARRIAGE DRIVE

682
PATTON'S AIR DRIER SYSTEM
MODEL P80

683
RESERVE AIR TANK
.

684
RESERVE AIR TANK
UNDER COOPER SCRAGG

684A
ALL AIR LINES, AIR HOSES AND AIR VALVES NOT ATTACHED TO EQUIPMENT ALREADY SOLD

684B
CRATE OF MP HUSKEY WIRE TRAYS

685
ALLEN BRADLEY CENTER LINE
MCC PANEL, 1200 AMP NO WIRE OR CONDUIT INCLUDED

686
ALLEN BRADLEY POWER FLEX
700 VARIABLE SPEED DRIVE

687
SAF DRIVE INC SOFT START
OPAL PRO SOFT START. MODEL MS6B-420-C-400 MAX 400 HP "" STARTER ONLY REMOVE FROM CABINET

688
GANG SAW MCCC CONSOLE
INCLUDES ALLEN BRADLEY FRAME B SERIES, VARIABLE SPEED DRIVE. MULTIPLE SWITCHES AND CABINET

688A
ALLEN BRADLEY SMC-FLEX CAT.NO. 150-F201NBD 200v/60HP;480V/150 HP

689
ALLEN BRADLEY CENTER LINE MCC PANEL
1000 AMP. NO WIRE OR CONDUIT INCLUDED

690
ALLEN BRADLEY CENTER LINE MCC PANEL
600 AMP NO WIRE OR CONDUIT INCLUDED

691
ALLEN BRADLEY CENTER LINE MCC PANEL
300 AMP NO WIRE OR CONDUIT INCLUDED

692
POWER FLEX 700 VARIABLE SPEED DRIVES
(5) SERIES B

693
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694A
30 AMP DISCONNECT THROUGH OUT UPPER FLOOR SAWMILL AS MARKED NO WIRE OR CONDUIT

1044A
RAVENS ALUMINIUM FLATBED TRAILER*
WITH BOLTED ON LOG BUNKS

694B
BREAK STATION AT TRIMMER

694C
MILLER THUNDERBOLT XL AC/DC WELDER

695
CAT WALK, STAIRS, CROSSOVERS, SAFETY FENCES
ON MAIN SAWMILL FLOOR. DOES NOT INCLUDE ANY STEPS FROM SAWMILL FLOOR TO CONCRETE BASEMENT AREA

696
ALL STRUCTURE STEEL IN THE MAIN MILL BUILDING
INCLUDING ALL FLOORING AND STRUCTURAL STEEL TO THE CONCRETE, NOT TO BE REMOVED UNTIL ALL ATTACHED EQUIPMENT HAS BEEN REMOVED, BUYERS OF LARGE ATTACHED EQUIPMENT HAVE THE RIGHT TO DISMANTLE IF NECESSARY TO REMOVE THEIR PIECE

700
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS (SN: 15608)

701
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702A
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

703
FILE ROOM DUST COLLECTOR
.

704
FILE ROOM DUST COLLECTOR
.

705
FILE ROOM DUST COLLECTOR
.

706
FILE ROOM ARMSTRONG BAND SAW FILING STATION
INCLUDES ARMSTRONG STRETCHER ROLL, 12" X 60" HAMMER BLOCK, ARMSTRONG #10 WELDING CLAMP, BENCH WITH ROLLERS

707
FILE ROOM PRECISION 4 KNIFE CHIPPER KNIFE TUB TYPE GRINDER
.

708
FILE ROOM CHIPPER KNIFE MANTAINANCE BENCH
WITH CONTENTS LESS ANY CHIPPER KNIVES

1049A
Log Trailer *
4 BUNK , WITH STRAPS

708A
TORCH CARD
TORCH CART

708B
BREAK STATION IN FILE ROOM (2) MICROWAVES, TOASTER, MINI FRIG

708C
CONTENTS OF CLOSET AS MARKED IN FILE ROOM

708D
WOOD BENCH AND CONTENTS IN FILE ROOM

708E
GRINDING TOOLS TO INCLUDE SWEDGE, SHAPERS AND DRESSERS IN FILE ROOM

708F
SIEMENS ROLLERS FOR GRINDER

708G
CABINET AND CONTENTS IN FILE ROOM

708H
(2) SAFETY HOOD

1061

709
FILE ROOM DUST BLOWER
12", 3 HP MTOOR, ALL PVC PIPE IN FILE ROOM

1064

710
FILE ROOM SALEM SAW GUIDE GRINDING MACHINE
(SN: 171360-96)

1065

711
FILE ROOM BABBIT MOLD
FOR CHIPPER KNIVES

1066

712
FILE ROOM BABBIT MOLD
FOR SAW GUIDES

1067

713
FILE ROOM BABBIT POT AND LADLE
.

1068

713A
SALEM GUIDE GRINDER
.

1069

714
FILE ROOM SHAFFER BOX FAN
54"X54", VENTILATION EQUIPMENT BOX FAN

1070

715
FILE ROOM HEATER
59" PERSONEL HEATER

1073

716
FILE ROOM NORTON 12" BAND SAW GRINDING ROCKS
.

1074

717
FILE ROOM AIR MASTER PEDESTAL FAN
30'

1075

718
ARMSTRONG LEVELER
(SN 2026B) OUTSIDE FILE ROOM

1076

719
BAND SAW BLADES OUTSIDE FILE ROOM
.

1077

720
BAND SAW BLADES OUTSIDE FILE ROOM
.

1078

721
BAND SAW BLADES OUTSIDE FILE ROOM
.

1079

722
BAND SAW BLADES OUTSIDE FILE ROOM
.

1080

723
BAND SAW BLADES OUTSIDE FILE ROOM
.

1081

724
BAND SAW BLADES OUTSIDE FILE ROOM
.

1082

725
BAND SAW BLADES OUTSIDE FILE ROOM
.

1083

726
BAND SAW BLADES OUTSIDE FILE ROOM
.

1084

727
BAND SAW BLADES OUTSIDE FILE ROOM
.

1085

728
BAND SAW BLADES OUTSIDE FILE ROOM
.

1086

729
BAND SAW BLADES OUTSIDE FILE ROOM
.

1087

730
BAND SAW BLADES OUTSIDE FILE ROOM
.

1088

731
BAND SAW BLADES OUTSIDE FILE ROOM
.

1089

732
10" (3) WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1116

733
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1119

734
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1121

800
NEW 8'x20' LUMBER DIP TANK NEVER USED SHOP BUILT. DIP ASSEMBLY, NEW CYLINDER, NO HYDRAULIC POWER

1122

801
8'X20' LUMBER DIP TANK WITH LIFT ASSEMBLY- NO HYDRAULIC PACK; NO CYLINDER

1123

802
LUMBER DIP TANK
LUMBER DIP TANK INCLUDES 8’x20’ TANK AND LIFT ASSEMBLY. DOES NOT HAVE HYD CYLINDER OR HYD POWER. TANK IS LOCATED BESIDE STICKER STAKER LINE.

1124

803
IMPERIAL CYCLONE WITH DUST HOUSE INCLUDES DUST PIPE AS MARKED

1125

804
4X4' METAL STAND

1128

805
40" DIAMETER MISC. BLOW PIPE AS MARKED

1129

806
62' OF 24" DIAMETER DUST PIPE (4 SECTIONS)

1130

807
40' CORNELL BALACED VIBRATING CONVEYOR WITH 18" BOTTOM, 12" SIDES WITH DRIVE. APRROX. 7.5 HP MOTOR

1131

808
40' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM, 9" SIDES WITH DRIVE

1132

809
60' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM AND 9" SIDES WITH DRIVE

1133

810
50' CONVEYOR WITH 110 LADDER BACK CHAIN; NO DRIVE

1134

811
16'X3' FRAME

1135

812
18'X24" BELT CONVEYOR NO DRIVE

1136

813
DEBARKER HEAD

1137

814
21'X24" BELT CONVEYOR. NO BELT. DRIVE INCLUDED

1138

815
MEADOWS 9' X10" BELT CONVEYOR

1139

816
WEBSTER 21' VIBRATING CONVEYOR 24" BOTTOM, 10" SIDE, 15 HP MOTOR ON DRIVE ""NOTE: 10' SECTION WITH BUSTED PADDLES

1146

817
23'X24" BELT CONVEYOR NO DRIVE

1148

818
20' SECTION PAN BOTTOM FRAME 18" BOTTOM 9" SIDES, NO FIBERGLASS PADDLES

1149

819
PRENTICE GRAPPLE FOR KNUCKLEBOOM LOADER

1150

820
QUICK COUPLE FORKS FOR LAODER
QUICK COUPLE FORKS FOR LOADER

1151

821
45'X24" BELT CONVEYOR FRAME. NO DRIVE

1152

822
COOK 36E2 2 SAW BOARD EDGER, NO INFEED/NO OUTFEED/ NO MOTOR

1156

823
8'X11' 5 STRAND HAUL UP DECK NO DRIVE

1157

824
40'X29" BELT CONVEYOR NO BELT/ NO DRIVE

1158

825
SALEM 10 SAW 16' TRIMMER WITH 0 AND MINUS 1 SAW. WILL PASS A 23' BOARD (SN: 135980) 10 HP MOTORS ON SAWS

1159

826
16' HEMCO TRIMMER 10 SAW WITH 0 AND MINUS 1 SAW.

1160

827
PALLET OF 81X HAULER UP CHAIN

1161

2001

828
12'X60' HANDS OFF SELF POSITIONING INFEED TABLE; CHROME ROLLS, 3 CHAINE ARM POSITIONING, 3 SETS OF 3 AIR STOP PINS WITH DRIVE

1162

829
SALEM TAILING DEVICE

1163

1000
CATERPILLAR 950 WHEEL LOADER (SN: CAT950KCR4A0214)
FRIDAY AUCTION STARTS HERE
2015 MODEL, 23.5R25 TIRES-50%, 9249 HOURS, QUICK COUPLE
THIS IS A VERY NICE MACHINE! 

1164

1001
6' BALE TYPE LOG FORKS
.

1002
BUCKET WITH QUICK COUPLE
.

1003
CAT 924K ARTICULATING RUBBER TIRE LOADER
2015 MODEL
(SN: C8N32278), 7011 HOURS, QUICK COUPLE. RUNS GREAT
VERY NICE CLEAN MACHINE.

1003A
VOLVO L150C WHEEL LOADER*
PIN# L150CV60784, 10,200 HOURS
RUNS GREAT, COMPLETELY REFURBISHED BY VOLVO IN 2018! QUICK COUPLER.

1003b
VME America’s bucket quick couple. Model 94743
.

1004
KOMATSU WA250PT-5) TOOL CARRIER
(SN70289) ARTICULATING LOADER WITH QUICK COUPLE ATTACHMENT, KOMATSU DIESEL ENGINE, JRB QUICK COUPLE LUMBER FORKS WITH BALE CLAMP.  BROKEN FORARM,
BAD HYD. LEAK BETWEEN TANK AND HY. PUMP DOES RUN AND OPERATE.

1004A
Cat 930 Wheel Loader* WITH BUCKET
sn: 41K12618) HOUR METER MISSING
RUNS GREAT

1005
SET OF BALE FORKS
QUICK COUPLE BALE FORK (SN 80835)

1005A
QUICK COUPLE BALE FORKS

1005B
QUICK COUPLE 7' FORKS WITH CLAMP

1014A
Linde H160 Forklift *
LOCATED AT  68 SNOWBIRD ROAD, ROBBINSVILLE, NC 28771

1005C
LOG PUSHER ATTACHMENT
FOR LOADING CONTAINERS.
LOCATED AT: 4595 JONATHAN CREEK ROAD WAYNESVILLE NC 28785

1005D
LOG PUSHING ATTACHMENT
LOG PUSHING ATTACHMENT FOR LOADING CONTAINERS

1005E
Container push pole
For use with single fork push bar for loading containers

1007
VOLVO QUICK COUPLE FORKS
-80153

1008
Wheel Loader*
L120C Volvo BM, hrs unknown, engine does not work loss compression, Transmission was still good when it was running, sold off site at 249 banco sawmill rd Burnsville, NC 28714, rough condition

1009
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Carrier  Serial # 11901. New factory engine installed with 0 hours!
NOTE: this machine is still located at: 4595 Jonathan Creek RD Waynesville NC because the engine did not get fully installed. Please see one of the auction staff if you have interest in this machine.

1010
BRUTE HUSKY LX175 KNUCKLEBOOM LOADER
ON SELF PROPELLER CARRIER, LEVER CONTROLS (SN: 859299), JOHN DEERE DIESEL MOTOR, HYDRAULIC PACK FOR BUCK SAW, CONTINUOUS ROTATING GRAPPLE

1011
Barko 160B Knuckleboom Loader
1995 , self propelled, lever controls, 6 BT Cummins engine, Rototec grapple, runs and operates good.

1012
John Deere 843H Cutter
FD22 Head, meter reads 10,382 hrs. new teeth, tires @ 50% runs & operates good

1013
300 CATERPILLAR MODEL DP135 (SN: 5DP00127)
30,000 LB FORKLIFT 16,934 HOURS, SIDE SHIFT, 7'3"X8" FORKS, CAT DIESEL ENGINE, 12:00 TIRES, DUAL TIRES ON FRONT, RIGHT SIDE TIRES 50%, LEFT SIDE 20%) 
RUNS GREAT

1022
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT (SN: AN29B80042), 6' FORKS, SIDE SHIFT, TRIPLE MAST, PROPANE, PNEUMATIC TIRES, 7250 HRS

1014
HYSTER 300XL FORKLIFT 30,000 LB
(SN D19D23304), 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL TIRES, PERKINS DIESEL, ENCLOSED CAB, 12.00-20 DUAL TIRES (80/FRONT: 10/BACK) Meter reads 1717 hours, but has probably rolled over.
 RUNS

1014B
TAYLOR TE-300M FORKLIFT LOADER LEVEL CAPABLITIES*
SERIAL #S-H6-24666, 25,000LB LIFT CAPACITY, 8068 HOURS;LOADER LEVEL CAPABILITIES, BRAND NEW BATTERY , RUNS GREAT

1015
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT. (SN: T43105.0269), TRIPLE SEE THRU MAST, 8' SELF POSITIONING FORKS, DUAL TIRES, CUMMINS DIESEL ENGINE, SHOWS 4942 HRS. *DOES NOT RUN. HAS ELECTRONIC ISSUES, MOTHER BOARD IS MISSING. WILL BE SOLD FROM ITL CURRENT LOCATION, AND CAN BE INSPECTED AND PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1016
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK

1017
USNR MODEL F305 30,000 LB FORKLIFT
USNR MODEL F305 30,000 LB FORKLIFT (SN: CE3050170010409) 8' SELF POSITIONING FORKS, SEE THRU MAST, SHOWS 5356 HRS. CUMMINS DIESEL ENGINE, DUAL TIRES.  HAS ENGINE ISSUES, DOES NOT RUN.  CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020
TAYLOR 250 E-250M BIG RED FORKLIFT
TAYLOR 250 E-250M BIG RED FORKLIFT, (SN: S-H5-1906) 8' FORKS, SIDE SHIFT, DUAL TIRES, DETROIT ENGINE.TRANSMISSION ISSUES. DOES NOT RUN. CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020A
TAYLOR Y-22WO FORKLIFT
TAYLOR Y-22WO FORKLIFT (SN: 3-68-4413) 22,000 LB CAPACITY; 6' FORK, DETROIT ENGINE, DOES NOT RUN; DOES HAVEDUAL TIRES; SIDE SHIFT; LOCATED AT J CREEK SITE

1020B
TAYLOR 300 FORKLIFT
TAYLOR 300 FORKLIFT;8' FORKS; SEE THROUGH MAST, DOES NOT RUN; BURNT; LOCATED IN J. CREEK

1021
NISSAN 11000 FORKLIFT
(DF05N50V) DUAL TIRES, 11,000 CAPACITY. (SN: DF05000430), 8' FORKS, SIDE SHIFT, 8.25.15 PNEUMATIC TIRES, AHOQINF ``6744 HOURS, DIESEL ENGINE, ENCLOSED CAB, SEE THROUGH TRIPLE MAST, RUNS GOOD , WAS USED TO SETUP THE AUCTION-NEEDS NEW BATTERIES 

1024
CATERPILLAR DPL40 9000 FORKLIFT
 9,000 LB FORKLIFT, DIESEL ENGINE, 4' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL PNEUMATIC TIRES, (SN: 3CN90542) 2434 HOURS
RUNS, NEEDS SEAL BETWEEN TRANSMISSION AND TORQUE CONVERTER REPLACED LEAKS HYD. OIL 

1025
NISSAN 90 FORKLIFT
MODEL WGF03A40V; CHASSIS: WGF03-920713, 9,000 LB FORKLIFT, TRIPLE MAST, SIDE SHIFT FORKS, 4' FORKS. DIESEL ENGINE, DUAL HARD TIRES ALL THE WAY AROUND, 6382 HOURS
EITHER HEAD GASKET OR INJECTOR PUMP PROBLEM.  WILL CRANK AND RUN

1026
TAYLOR "LITTLE RED" THD100 FORKLIFT: SN: P31023
10,000 LB CAPACITY, 4' FORKS, SIDE SHIFT, SEE THRU MAST, PERKINS DIESEL ENGINE, SHOWING 1057 HRS, BIG TIRES ON FRONT (13.00-24) BACK (9.00-20).  RUNS GOOD.

1027
HYSTER 120FT FORTIS FORKLIFT
2017 MODEL, HYSTER 120FL FORTIS FORKLIFT, TURBO DIESEL (SN: U0005V04367P) TRIPLE MAST, SIDE SHIFT, 8'FORKS, DUAL TIRES, SHOWS 2516 HRS. ONE OWNER! VERY NICE MACHINE!!

1028
HYSTER H50XM FORKLIFT
HYSTER H50XM FORKLIFT (SN: 177B48997B) TRIPLE MAST, SIDE SHIFT, 4' FORKS, PROPANE, PNEUMATIC TIRES, DOESN'T RUN

1028A
Komatsu FG4OZ Forklift*
KOMATSU FG4OZ FORKLIFT, (SN: 1107238) 8,000 LB CAPACITY, SIDE SHIFT, PROPANE, 4' FORKS, 7360 HOURS  WAS RUNNING, QUIT; AND HAS NOT RUN SINCE

1029
JCB Track Skidsteer
2004, model 4400KG Serial # 118777L Pilot controls, 2225 hrs. brand new tracks. runs and operates good, nice machine.

1029A
BOBCAT 753 SKID STEER*
6933 HOURS, RUNS 

1029B
Bobcat 743B skid steer
Bobcat 743B skid steer s/n 509324270 With bucket showing 2137 hours. 1 FLAT TIRE , NO KEY

1030
750 John Deere Dozer
meter reads 5532 hrs. runs and operates like it should. 12' blade

1031
2008 FREIGHTLINER CL120 TRACTOR WITH COLUMBIA SLEEPER
 (1FUJA6CV78L41179 ) EDEN FULLER 10 SPEED TRANSMISSION. 700,335 MILES, DETROIT DIESEL MERCEDES (OM460LACID781). RUNS AND DRIVES. NEEDS WIRING HARNESS, 1 SET OF WHEELS MISSING

1031A
2007 VOLVO TRACTOR*
2007  VOLVO TRACTOR 856,833 MILES , RUNS  (SN: 414NC9GH07N457017)

1032
2000 STERLING DAY CAB TRUCK
(SN: 2FZHCYB1AF41762) FULLER TRANSMISSION, DISREPAIR, CUMMINS DIESEL. DOES NOT RUN. PARTS TRUCK

1033
2005 VOLVO TRUCK
2005 VOLVO TRUCK, (VIN: 4V4NC9GG35N386620), 10 SPEED

1033A
Ford Sterling Truck*
2006, 102,000 miles, C7 Cat engine, Michelin tires @ 90% this truck is in excellent condition.

1034
2012 FREIGHTLINER CASCADIA TRUCK
2012 FREIGHTLINER CASCADIA TRUCK, (VIN: 1FUJGLDR6CBL5976), 10 SPEED TRANSMISSION, DOUBLE BUNK SLEEPER, DETROIT DD15 DIESEL, HAS ELECTRONIC PROBLEM

1035
LTL 9000 Ford Truck
With 60 series Detroit deisel, good running unit

1035A
1988 INTERNATIONAL DUMP TRUCK
1988 INTERNATIONAL S1600 DUMP TRUCK, SINGLE AXLE, STEEL DUMP BED; INTERNATIONAL DIESEL ENGINE. (SN: 1HTLAZRM5JH558937) ; MANUEL TRANSMISSION; SHOWING 49,430 MILES,ONSITE AND RUNS GOOD, DEAD BATTERY

1036
2000 FORD F650 SUPER DUTY TRUCK
(3FDWF65H3YMA03246), CAT DIESEL ENGINE, (1650) MAXON TOMMY LIFT,   75R.22.5 TIRES.  RUNS GREAT.

1037
FORD F350 SUPER DUTY SERVICE TRUCK
STAND TRANSMISSION, GRANNY LOW, 7.3 POWER STROKE DIESEL ENGINE, 4 DOOR, 189,999 MILES.  EITHER OIL PUMP OR INJECTOR PUMP. WILL START AND RUN. CREW COULD NOT GET IT STARTED , DEAD BATTERY

1037AA
FORD 350 TRUCK (VIN: 1FDKF38F9TEB42285)
POWER STROKE DIESEL SERVICE TRUCK. RUNS, CREW COULD NOT GET IT STARTED, DEAD BATTERY

1037B
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) EXTENDED CAB WORK TRUCK
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) 146,000 EXTENDED CAB WORK TRUCK, RUNS AND DRIVES WELL

1038
2013 FORD XL 150 4X4 PICK UP
2013 FORD XL 150 4X4 PICKUP, AUTO TRANSMISSION, GAS ENGINE NEEDS TUNE UP, TRANSMISSION WORKS BUT IS WEAK. RIGHT NOW THE SPARK PLUGS ARE OUT AND WILL NOT START. BUT TRUCK DOES RUN. HAS OVER 300,000 miles

1039
2003 PEERLESS 45' WALKING FLOOR TRAILER VIN: 1PLE045283PG53021)
WITH KEITH WALKING FLOOR 11R24.5 TIRES (5-70%, 3-10%-20%) ALUMINUM RIMS

1040
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1292A45266T199047)
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # V12, TIRES: (2-70%, 6-20%)

1041
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1Z92A452136T19118))
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES (FRONT 4-70%, REAR: 20%) , V14

1042
2006 (ITT) INNOVATIVE 45' OPEN TOP CHIP VAN (SN: 1Z92A45246T199046)
(VIN:1Z92A45246T199046) ) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # U12, TIRES: FRONT AXLE 4: 50%, REAR: 2-10%, 2-50%)

1042A
2015 PITTS OPEN TOP TRAILER*
MODEL CV-45, 66300 GVWR , 20,000LB GROSS AXLE WEIGHT, SER 5JYCV4523GE161697

1042B
BUDD OPEN TOP TRAILER*
CC3404YZ0687

1042C
BUDD 1978 OPEN TOP TRAILER*
SL2S450B50 , SN163211M, GVWR 70,000

1043
1973 FRUEHAUF CLOSE TOP DUST TRAILER
(HPR472095) FIXED TANDEM, 295/75R 22.5 TIRES

1044
FRUEHAUF 40' OPEN TOP VAN TRAILER
.

1055
MARYVILLE AERIAL WORK PLATFORM
MODEL 2033, 20' HEIGHT, 800 LB CAPACITY, 24 VOLT; (SN; 08601416)  

1044A
1991 RAVEN ALUMINUM FLATBED TRAILER
1991 RAVEN ALUMINUM FLATBED TRAILER; (1R1F04825MJ913116) WITH BOLTED ON LOG BUNKS

1045
1997 TRANSCRAFT ALUMINUM FLAT BED TRAILER
MODEL: EAGLE W2 48X96, VIN: ITTF4820000622

1046
1990 RAVENS 48' X96" ALUMINUM FLAT BED TRAILER
SPEAD AXLE, (1R1F04826LE900219) 11R22.5 TIRES

1046A
1995 UTILITY FLATBED TRAILER* (SN:104F52480SA605005)
78,000 GVWR

1046B
1994 Trailmobile Trailer
48' x 96", model# F71T-5EAA, STEEL, WOOD FLOOR

1047
FMCSA Tandem Trailer
1999, aluminum floor, 42' road ready.

1047A
Benco Tandem Axle Trailer*
45', good floor and road ready

1047B
1994 TRANSCRAFT FLATBED TRAILER*
MODEL TL2000 W2 , 48'X96" , 80,000GVWR ,WITH REMOVABLE LOG BUNKS  (SN; 1TTF48202R1040988) 

1047BB
1995 Flat Bed Trailer*
96" x 45' Steel Aluminum Combo Transcraft Trailer. One side landing gear doesn't work and one axle hanger is cracked. Good Tires, brakes and lights. been using it until June 12th.

1047C
2000 LUFKIN FLATBED TRAILER* (SN: 1L01B482341146461)
WOODEN FLOORS

1047D
TRANSCRAFT EAGLE FLAT BED TRAILER
TRANSCRAFT EAGLE FLAT BED TRAILER; SUPER BEAM, SPREAD AXLE; 48"X96";(VIN: ITT-F4520-021044588) ALUMINUM BED

1048
Log Trailer
42' dual bunk, new pins & bushings & springs. Road ready.

1049
PITTS LOG TRAILER (MFG: 6-99) MODEL LT-40-B DOUBLE BUNK
(1PELT40XXP990712) 11R22 TIRES

1049A
1989 NABORS DOUBLE BUNK LOG TRAILER
1989 NABORS DOUBLE BUNK LOG TRAILER (VIN: 1L01B4823Y1146461)

1050
Pup Trailer
Road ready.

1051
Log Bed
Brand new

1052
Log Bed
In close to new condition.

1053
Log bed
w-straps.

1054
Log bunk
.

1056
Quick attach lumber forks
4’ lumber forks

1057
Log bunk steel
Steel pieces pre cut to make log bunks for flat bed trailers
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Oak Valley Hardwoods
 Live Auction
 
Sale Date(s)
Friday Jun 26, 2020 Completed
Sale Location

North Marion, NC 28752
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Auction Schedule:
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

Muliple Complete Large Sawmill Setups- Selling At One Auction Optimizing Sawmill Complete Liquidation - Nicholson Ring Debarker
Baxley Trim Line with Hi-Tech J Bar Sorter - Baxley Optimizing Edger

30

00
Information Lot*
Auction Schedule::
All items are to be sold from 8482 US 221 North, Marion NC 28752
Wednesday June 24th: Lots 100 to 499
Lots 300 to 394 are available for your inspection at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785. Please call Zach Kittrell for an appointment at 931.224.0699. All items are to be sold from the location in Marion.)
Thursday June 25th: Lots 500 to 999
(These items are at the Marion location where the auction is to be held and are also available for your inspection by calling Zach.)
Friday June 26th: Lots 1000 to 1250
All rolling stock and attachments, etc. These are also located at the Marion location.
Winning bidders have 120 days to remove the larger equipment. Rigging is the responsibility of the buyer and all riggers will need to be properly insured. Rigging and loadout may be scheduled by calling Zach Kittrell at 931.224.0699.

 

1
All copper

31

96
Jockey Grinder
Like new condition

97
Miller Bobcat Welder
Model 250, ONLY 64 HOURS, 9.5KW Generator, includes the leads.

98
Champion Air Compressor
Model HGR7 with R15 pump, Honda GX390 engine

98A
300 HP Electric Motor
1785 RPM, Frame 449T, Excellent condition, likes like it was never ran since rebuilt

99
3 phase induction motor
250 hp 460 volt/1185 RPM (s/n. 990Y11614) Model B2506FLF4BM, excellent condition

100
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

101
GE 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

102
LINCOLN 150 HP 1780 RPM ELEC. MOTOR 444T FRAME

103
LINCOLN 100 HP, 1775 RPM 404T FRAME ELEC. MOTOR

104
MAX-SE 3 PHASE INDUCTION MOTOR; 50 HP 1765 RPM, 326T FRAME

105
BALDON 7.5 HP 1770 RPM ELEC. MOTOR; TECO 7.5 HP 12OO RPM ELEC. MOTOR

106
MOTOR BASE

107
MORRIS DRIVE 5.89 HP 1750 RPM 20:1 RATIO

108
SMCYCLO DRIVES 5 HP MOTOR

108A
6' Tables

108B
8' Table

109
PALLET OF MISC

110
VIBRATING CONVEYOR DRIVE (NO MOTOR)

111
PALLET OF MOTORS TO INCLUDE; BALDON 10 HP1760 RPMT MOTOR; LEESON 7.5 HP ELEC. MOTOR; (2) MOTOR BASES;(2)SIEMENS MOTORS; NORD DRIVE SYSTEM

112
PALLET OF (3 DRIVES AND (2) MOTORS

113
POP UP CUT OFF SAW WITH 7.5 HP MOTOR

114
SIEMENS 75 HP 1180 RPM 403T FRAME ELEC. MOTOR

115
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

116
TOSHIBA 150 HP 1180 RPM 445 TZ FRAME ELEC. MOTOR

117
LINCOLN 50 HP 1770 RPM 326 T FRAME ELEC. MOTOR

118
MARATHON 125 HP 1780 RPM 405TZ FRAME ELEC. MOTOR

119
NEW IN CRATE WORLD WIDE 75 HP 1780 RPM 365T FRAME ELECTRIC MOTOR

120
(4) WAREHOUSE LIGHTS

121
PALLET OF 110 LADDER BACK CHAIN

122
TOSHIBA 200 HP 1780 RPM 447T FRAME ELEC. MOTOR

123
NEWMAN 200 HP1775 RPM ELEC. MOTOR

124
WORLD WIDE 150 HP 1770 RPM 445T FRAME ELEC. MOTOR

125
NEW IN CRATE TECO 75 HP 1775 RPM 365T FRAME ELEC. MOTOR

126
NEW IN CRATE MARATHON 40 HP 1780 RPM ELECTRIC MOTOR

127
NEW IN CRATE WORLD WIDE 100 HP 1790 RPM, 405T FRAME ELEC. MOTOR

128
NEW IN CRATE TECH 200 HP 3584 RPM ELEC. MOTOR

129
LINCOLN 200 HP 17898 RPM, 445T FRAME ELEC. MOTOR

130
LINCOLN 200 HP 1483 RPM 445TS FRAME ELEC. MOTOR

131
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

132
NEW IN BOX LEESON 7.5 HP 1765 RPM, 213T FRAME ELECTRIC MOTOR

133
SQUARE D 5KVA TRANSFORMER

133A
(2) 24" HYDRAULIC CYLINDERS

134
PALLET OF (4) MOTORS (1) LINCOLN 30 HP;(1) 25 HP;(1) WESTINGHOUSE 30 HP; (1) 25 HP TOSHIBA ALL FOR ONE MONEY

135
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

136
(2) HYDRAULIC TANKS AND MISC

137
(2) CARRIAGE END ROLLERS

138
PALLET OF MISC INCLUDES 8 ROLLERS

139
FEED ROLLS AND CYLINDERS

140
PALLET OF V BELTS

141
PALLET OF CAN-AM CHAIN

142
(3) MOTORS (2) LINCOLN 50 HP (1) UNKNOWN

143
(2) MOTORS (1) LINCOLN30 HP (1) UNKNOWN

144
(4) MOTORS (2) MARATHON 3 HP; (1) LEESON 15 HP; (1) 10 HP

145
PALLET OF MOTORS (2) GEAR MOTOR DRIVES;(2) 7.5 HP ; (1) 25 HP MOTOR;(1) 7.5 HP

146
PALLET OF DEBARKER ARMS

147
PALLET OF MISC

148
PALLET OF MISC ELECTRICAL

149
PALLET OF MISC ELECTRONICS

150
PALLET OF CYLINDERS

151
PALLET OF V BELTS

152
PALLET OF ROLLERS, SHEAVES, AND CHAIN LINKS

153
(6) CASES OF PHILLOPS 48" 40 WATT, t12 LIGHT BULBS (30 BULBS PER CASE)
(6) CASES OF PHILLIPS 48" 40 WATT, T12 LIGHT BULBS (30 BULBS PER CASE)

154
PALLET OF PILLOW BLOCK BEARINGS, BORWN DRIVE, MOTOR MOUNTS
PALLET OF PILLOW BLOCK BEARINGS, BROWN DRIVE, MOTOR MOUNTS

155
PALLET OF H78 CHAIN

156
AUTOMATED LUMBER HANDLING SYSTEM ELECTRIC CONTROL BOX

157
NEW IN BOX (6) SIEMENS SENTRON BUS WAY SWITCHES 20 HP

158
SCHNIDER ALTIVAR 61 75 HP

159
PALLET OF CHAIN

160
PALLET OF MISC ELECTRICAL

161
CRATE OF MISC ELECTRICAL

162
(2) DRIVES

163
NEW IN CRATE TECO 15 HP 1765 RPM ELEC. MOTOR

164
SILVA TECH SETWORKS CONTROL BOXES

165
ALLAN BRADELY 1395 RPM SOFT START STARTER PROGRAMMABLE TERMINAL

166
MILLER THUNDERBOLT XL 225 AMP WELDER

167
MILLER THUNDERBOLT XL 225 AMP WELDER

168
CONVEYOR INC. (8) 22' OUTSIDE DIAMETER RIGHT HAND AUGER FLIGHTS

169
PEDESTAL FAN
PEDESTAL FANS

169A
Pedestal fan

169B
Pedestal fan

170
PALLET OF CHAIN AND SHEAVE

171
PALLET OF CABLE

172
PALLET OF MISC

173
ALLAN BRADLEY 40 HP DC DRIVE MOTOR- GEAR REDUCTIONS UNIT; END CABLE FOR CARRIAGE DRIVE

174
MISC ELECTRICAL

175
NEW PALLET LADDER BACK CHAIN

176
NEW PALLET OF 81X CHAIN

177
(1) 400 APM SAFETY SWITCH (2) 30" SWITCHES

178
(3) HYDRAULIC ACCUMULATOR MODELS

179
PALLET WITH TELCO 5 HP MOTOR; KICKER ARM, ROLL OF BELT

179A
Steel Organizer Rack
includes all contents, lots of steel shafts & piping, good rod lot, Includes (2) 3 15/16 in. shafts one is approx. 12ft, one approx. 78in.

179B
Trim Sawblades
24in. Qty. appox. 10

179C
Crate of Sprockets & Pulleys
.

179D
Crate of Sprockets & Pulleys
.

179E
Crate of Chain, Sprocets, & Pulleys
.

179F
Crate of Chain, Sprocets, & Pulleys, and Electric Motor
.

180
STAINLESS STEEL PORTABLE GILL

181
LINCOLN R30S-400 WELDER

182
ALLAN BRADLEY 800 AMP MOTOR CONTROL CENTER WITH (2) SIZE 3 STARTERS; MISC BOXES

183
100 HP SOFT START STARTER

184
NEW IN CRATE WEG SSW 07 SOFT STARTER

185
Leeson Electic Motor 5HP NEW
Model-CHH-6185Y-59 spare for Nicholson

186
Leeson Electic Motor 3HP NEW
.

187
Marathon Inverter Duty Motor
5/3 HP New!

188
Reducer Gear Box
New 25 to 1 ratio ser. # 150300552

189
Gear Box
New

190
Heavy Shaft
New in box

191
Hydraulic Cylinders
.

192
Belting
some brand new

193
Belting
some brand new

194
Electric Motor
50HP 1770 RPM, frame 326 TSC

195
Electric Motor, Toshiba brand new
15HP 1770 RPM, frame 254 T

196
Electric Motor,Nema Designs, Brand New in crate
20HP 1760 RPM, frame 256 T

197
Electric Motor, Crown Triton
3HP, frame 182 TC

198
Electric Motor, Nidec, Nema suitable
10HP, 1760 RPM

199
2 Electric over Hydraulic Valves
appear to be new

200
Electric Motor
225 HP, 1185RPM frame 445 T

201
Electric Motor
Nidec, 2HP, 1750RPM, frame 145 TC

202
Electric Motor
Baldor, 5HP, w/sterns brake

203
Sumitomo Drive
.

204
56PM2A Dodge Drive
electric gear drive w/2HP Baldor electric motor, 1735 RPM, frame 56C

205
Electric Motor
Baldor, 50HP, 1765 RPM, frame 326 T

206
Steel Shaft
NEW! Keyed, approx. 2in. X 36in.

207
Gear Box
.

208
Banding Cart w/tools
.

209
Organizer w/misc. bolts
.

210
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

245
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED
SHELVING 4 UP RIGHTS WITH 18 BEAMS NO CONTENTS INCLUDED

211
Brand New Hydraulic Unit w/3HP electric motor
1720RPM, includes foot pedal controls, electric valve bank

212
Dayton electric motor
1HP, 1140RPM, brand new

213
Nema electric motor
1HP, 1760RPM, frame 56C

214
Squirrel cage fan in crate
.

215
Tools
3 to 5 cant hooks, 3 log turners, lumber grading stick, pickax, other misc tools. One cant hook has a broken handle.

216
100 amp disconnect
New

217
Chain hoist
CM series 622 2 ton hoist

218
Chain come a long
Coding 1-1/2 ton come a long

219
6’ ladder
Werner step ladder

225
(2) JOY STICK CONTROLS

226
WIRE FEED WELDER HANDLE

227
FULL BODY SAFETY HARNESS SIZE SMALL/MEDIUM

228
STEEL CABINET WITH CONTENTS. MOSTLY WELDING RODS

229
( 4) 5 GALLON BUCKETS RUST OLEUM 7400 SYSTEM ENAMEL PRIMER, (3) 1 GALLON CANS OF RUST OLEUM 7400 SYSTEM ENAMEL PRIMER

229A
(3) 5 GALLON RUST OLEUM 7400 SYSTEM ENAMEL

230
(2) 5 GALLON OF CAR QUEST MULTI-VEHICLE ATF AUTOMACTIC TRANSMISSION FLUID

231
(1) 5 GALLON OF LUBE MASTER PREMA LUBE RED "00"

232
(1) 5 GALLON BUCKET CONQUEST GEAR OIL, SAE80W-90

233
SHERMAN WILLAMS INDUSTRIAL ENAMEL

234
(2) 5 GALLON BUCKETS OF CHEVRON HEAVY DUTY HD00

235
(1) DEV-CON WEAR GUARD HI/LOW 30 LBS

236
GE 400 AMP SWITCH

237
SM-CYCLO GEAR DRIVE

237B
Log Trough/waste Conveyor Drive Sprocket
Good con.

238
NEW NEVER INSTALLED ALLEN BRADLEY POWER FLEX 700 AC DRIVE

238A
Used Allen Bradley starter
Allen Bradley SMC FLRX

239
(2) SHELVES CONTENTS AS MARKED

240
(1) SHELF CONTENTS AS MARKED

241
(1) CONTENT OF SHELF MOSTLY VARIOUS SIZES OF HYDRAULIC CYLINDERS NEW AND USED

242
LOT OF HYD. MOTORS NEW AND USED AS MARKED 1/2 OF SHELF SEPARATED BY ORANGE TAPE

243
1/2 SHELF WITH MOSTLY CYLINDERS AND MISC

244
BOTTOM SHELF AS MARKED MOSTLY USED CYLINDERS

246
TOP SHELF WITH AIR BAGS AS MARKED

247
2ND SHELF (MIDDLE) NEW AND USED BEARINGS; VARIOUS SIZES

248
BOTTOM SHELF NEW AND USED BEARING VARIOUS SIZES AS MARKED

249
2ND SHELF (MIDDLE) MOSTLY NEW AND USED VALVES AS MARKED

250
(8) NEW IN BOX 4 VOLT BEARING MODEL UCF215-47 AS MARKED

251
(5) HARD RUBBER ROLLERS

252
CONTENTS OF 4 SHELVES AS MARKED

253
LOT OF WEAR STRIPS AS MARKED

254
(4) SPLIT SPROCKETS ON FLOOR AS MARKED NEW IN BOX

256
2 SHELVES NEW AND USED SPROCKETS AS MARKED

257
3 SHELVES OF NEW AND USE SPROCKETS AS MARKED

259
CABINET AND CONTENTS

260
WOOD BIN WITH PIPE FITTINGS

261
Misc. Parts
Air valves, bearings, and lots of new parts.

262
Huge lot of New Parts
Sprockets, bushings, 81X roller chain, belts, (no shelving)

263
V Belts
All new belts on the wall.

264
Pipe Bender
With cutter, complete set.

265
Electrical Orginizer Bin
Fully stocked with electrical. Also includes 2 temposonic rods. Also includes orginizer.

266
Orginizer of Electrical
Large fuses, connectors, and more. Includes orginizer.

267
Orginizer with Fittings
PVC fittings and electrical fittings.

268
Orginizer with Electrical
1/2" to 1 1/2" fittings

269
Orginizer with Electrical
Fitings.

270
Orginizer with Electrical
Fittings etc.

270B
Organizer
w/roller chain links

271
High Tech Control Panel
.

272
Tool Box
Loaded with misc. Logging tools. On wheels. Including 4 split saver hammers.

272A
Lincoln 250 Arc Welder
on wheels

272B
Napa Tool Chest
loaded w/gear pulls, well sockets, hose repair kits, and more

272C
Napa Tool Chest
loaded w/misc. tools, bearings, ect

272D
Wheel Barrow & Shovels
some like new

272E
Milwaukee Grinder
big one

272F
Earthquake XT Impact
3/4 drive

272G
Tool Chest
w/wrenches & socket set

272H
Welding Table
on wheels, includes 2 new wheels

272I
Welding Table
w/vise

272J
Filter Cart
w/pump

272K
Moving Cart
nice

273
12 Volt Sprayer
Includes wagon and battery

273A
Log Tongs
Like new

273B
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
.

273C

274
Pallet of Electrical
Parts

275
Pallet of electrical wire
Various sizes.

276
Welder
Hobart stick welder, 300 amp. Serial 12RT-21474

277
Lot of wire
Pallet of misc wire

278
Pallet of Misc.
2 warehouse lights, #60 roller chain, Husqvarna 570 chainsaw, Stihl 290 chainsaw w-bad cylinder, case of new 4' bulbs.

279
Misc belt; office chair box of contents
.

280
Pallet of Nylon Banding & Clips
4-Mar

281
Pallet of Nylon Banding
.

282
Pallet of Parts
HUGE selection of new & used motors, bearings, valves,belt lacing, Dodge bearings & gear boxes & so much more

283
Electric Heater
on wheels

284
Electric Heater
on wheels

285
Electric Heater
on wheels

286
Electric Heater
on wheels

287
Electric Heater
on wheels

300
Progress HOG
28'' Progress HOG WITH 125 HP MOTOR; MODEL 960002, S/N 27 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

301
LOG DECK
3 STRAND 11'X25' LOG DECK WITH ELECTRIC MOTOR AND DRIVE; STOP AND LOAD , Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

302
HMC DEBARKER
36'' HMC DEBARKER WITH ELECTRIC MOTOR MODEL V2010 S/N 639, Located at Maggie Valley Sawmill 4595 Jonathan Creek Road, Waynesville NC 28785.

303
BELT CONVEYOR
33'X18" BELT CONVEYOR WITH ELECTRIC 5 HP MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

304
CONCAVE BELT CONVEYOR
40'X24" CONCAVE BELT CONVEYOR WITH ELECTRIC MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

305
LOG DECK
35'X9'6" 3 STRAND LOG DECK WITH HYDRAULIC STOP AND LOAD; ELECTRIC MOTOR AND DRIVE , Located at 4595 Jonathan Creek Road, Waynesville NC 28785

306
LOG TURNER
CORELY BAR TYPE  LOG TURNER; CONTROLS IN CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

307
HYDRAULIC UNIT
LOG TURNER HYDRAULIC PACK; 20 HP ELECTRIC MOTOR WITH HYDRAULIC PUMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

308
CORLEY CARRIAGE
16'X 48" CORLEY 3 HEAD BLOCK LINEAL POSITION CARRIAGE; INCLUDES 2004 LEWIS CONTROL READY SCAN 1 SYSTEM WITH DYNA VISION HEADS, CAB AND CONTROLS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

458
Log Trough
w-dual kickers. hyd. drive. heavy duty, approx. 24'

309
HYDRAULIC PACK
40 HP HYDRAULIC UNIT, MODEL AC-5-1-5AC, (S/N: 78700) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

310
CORLEY SHOT GUN FEED
2004 CORLEY SHOT GUN FEED SMA280C, MODEL 01504FLF4UMQ WITH 150 HP TOSHIBA MOTOR (SN: 0402103511) INCLUDES CONTROLS IN SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311
BAND MILL
MCDONOUGH 7' RIGHT HAND BANDMILL ; AIR STRAIN (SN: 84MA-164) 13" FACE, 1 1/8" THICKNESS RUNS 10" BLADE; INCLUDES 5' OFF BEARER BELT, THIS IS A VERY NICE UNIT! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311A
ELECTRIC WINCH
ELECTRIC WINCH FOR LIFTING BANDSAW BLADES (WINCH LOCATED NEXT TO DEBARKER CAB) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

311B
LASER LIGHT AT SAW CAB
LASER LIGHT AT SAW CAB ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

312
MOTOR
250 HP TOSHIBA MOTOR UNDER BAND MILL/ FRAME#N587UZ; 1185 RPM; MODEL B2506FLF4BD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

313
SLAB DUMP
13'X31" BELT SLAB DUMP WITH OHIO GEAR REDUCTION DRIVE AND AIR CYLINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

314
ROLL CASE
36''X15' LIGNA MACHINERY ROLL CASE; 7 ROLLS;9" LIVE ROLLS WITH AIR STOP, HEAVY DUTY! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

315
ROLL CASE
25' ROLL CASE W/ 9 ROLLS (24"X7" ROLLS) WITH MORRIS GEAR MOTOR DRIVE; AIR STOP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316
GANG
2004 LIGNA 10X36" TOP ARBOR, THIN KERF GANG WITH 14' SELF POSITIONING INFEED CANT TURNER. (5 LIVE ROLLS, 3 POSITION CHAIN)INCLUDES (2) 200 HP MOTORS, CONTROLS IN CAB, MOTOR CONTROLS AS MARKED ON WALL, OUTFEED ROLL CASE, THIS MACHINE IS A VERY NICE MASS-PRODUCTION MACHINE!  ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

316A
Electric Motor
200 HP on Gang Saw.

316B
Electric Motor
200 HP on Gang saw.

317
SAW GUIDES AND SAWS FOR GANG
APPROX. 100 - 29.5" DIAMENTER SAW GUIDES AND SAWS FOR GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317A
IMW MODEL 24055 SAW GUIDE GRINDER
IMW MODEL 24055 SAW GUIDE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317B
BABBIT POT
BABBIT POT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317C
BABBIT MOLD FOR GUIDES
BABBIT MOLD FOR GUIDES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317D
ARBOR FOR LIGNA GANG
ARBOR FOR LIGNA GANG ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

317E
(4) SAW BLADE CARRYING BOXES
(4) SAW BLADE CARRYING BOXES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

318
TRANSFER DECK
4 STRAND 11'X11' POP UP TRANSER DECK WITH STOP AND LOAD; ELECTRIC MOTOR AND GEAR BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

319
CAB
60"X68" CAB; CONTROLS NOT INCLUDED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320
EDGER
NEW IN 2004 4''x36'' LIGNA MACHINERY EDGER 36' DEAD ROLLS, NO DRIVE; 19'X4" TAILING DEVICE; 2 MOVABLE SAW HYD. SET WITH 60 HP ELEC. MOTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

320A
SAW BLADES FOR EDGER
(8) 17.5" DIAMETER SAW BLADES; (12) 9.5" DIAMETER SAW BLADES FOR EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

321
LASER LIGHTS
(2) FOREST LINE LASER LIGHTS; BRACKET WITH EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

322
TRANSFER DECK
9'X11' 4 STRAND TRANSFER DECK WITH ELECTRIC DRIVE; C55B ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

635
TRANSFER DECK
66' 3- STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

323
BELT CONVEYOR
25'X36" BELT CONVEYOR BELT; GEAR MOTOR DRIVE, NICE UNIT. ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

324
TRANSFER DECK
30'X11' 4 STRAND TRANSFER DECK, C55D ROOF TOP CHAIN W/ 2 SETS OF 4 ARM AIR STOPS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

325
TRANSFER DECK
LIGNA 11'X14' 9 STRAND TRANSFER DECK; C55 D ROOF TOP CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

326
TRANSFER DECK
17'X11' 4 STRAND TRANSFER DECK; H78B ROOF TOP CHAIN/ GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

327
LUMBER DECK
21' 3 STRAND LUMBER DECK (2 STRAND H78 ROOF TOP CHAIN;1 STRAND H78 CHAIN) GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328
DROP SAW TRIMMER
22' CORLEY DROP SAW TRIMMER WITH 8 SAWS; 7.5 HP MOTOR ON SAWS WITH LASER LINE; 11' -7 OUT DECK WITH 181X CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

328A
SAWS FOR CORLEY TRIMMER
(14) 25.5" DIAMENTER SAWS FOR CORLEY TRIMMER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

329
UNSCRAMBLER
 4 STRAND UNSCRAMBLER, GOOD CONDITION, WITH ELECTRIC DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

330
BELT CONVEYOR
25' BELT CONVEYOR; 24" BELT WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

331
GREEN CHAIN
110'X11' 4 STRAND GREEN CHAIN WITH H78 CHAIN; 5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

332
LUMBER CART
144" X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

333
LUMBER CART
147"X 43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

334
LUMBER CART
112"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

335
LUMBER CART
111"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

336
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

337
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

338
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

339
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

340
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

341
LUMBER CART
87"X43" LUMBER CART, 10" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

537A
PARKER SSD690 DRIVE MOTOR CONTROLS

342
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

343
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

344
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

345
LUMBER CART
83"X48" LUMBER CART, 11" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

346
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

347
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

348
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

349
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

350
LUMBER CART
72"X84" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

351
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

352
LUMBER CART
72"X88" LUMBER CART, 8"WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

353
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

354
LUMBER CART
120"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

355
LUMBER CART
64"X88" LUMBER CART, 8" WHEELS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

356
BELT CONVEYOR
26'X14" BELT CONVEYOR WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

357
BELT CONVEYOR
22'X24" BELT CONVEYOR WITH 16" BELT; GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

358
CHIPPER
PROGRESS MODEL 70 CHIPPER, ( SN: 001207) 8 KNIFE, BOTTOM DISCHARGE, NICE MACHINE! ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359
MOTOR
TECO-WESTINGHOUSE 250 HP MOTOR, 1785 RPM, 449TZ FRAME ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359A
SOLID STATE REDUCED VOLTAGE STARTER
SQUARE D ALTISTART 46 250 HP SOLID STATE REDUCED VOLTAGE STARTER INCLUDES JUNCTION BOX ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359B
CHIPPER KNIVES
CHIPPER KNIVERS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

359C
BABBIT MOLD
BABBIT MOLD ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

360
VIBRATING CONVEYOR
33'X18" BOTTOM 10" FLARED SIDES VIBRATING CONVEYOR INCLUDES 5' FIBERGLASS SECTION AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

361
MDI METAL DETECTOR
MDI METAL DETECTOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

362
DRAG CHAIN
APPROX. 30' DRAG CHAIN UNDER CHIPPER, H-78 DRAG CHAIN WITH 7.5 HP GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

363
BELT CONVEYOR
32'X18" BELT CONVEYOR GEAR REDUCTION DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364
SHAKER SCREEN
7'X7' PROGRESS SHAKER SCREEN 2001; HYD. DRIVE, GOOD CON. SN 010031 ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

364A
Blower
Approx. 32” in dia. and has a 20 hp 3 phase motor and is in very good condition, uninstalled, Located at 4595 Jonathan Creek Road, Waynesville NC 28785

365
BELT CONVEYOR
20'X10" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

366
BELT CONVEYOR
20'X12" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

367
CONVEYOR
30' FINES CONVEYOR WITH H78 CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

368
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, GOOD CONDITION
(approx. 14 unit capacity) 12'X13'
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

369
CHIP CONVEYOR
APPROX. 80'X18" CHIP CONVEYOR WITH H78 DRAG CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

370
BELT CONVEYOR
70'X18" BELT CONVEYOR INCLUDED ALL APRON PLATES ATTACHED; MOTOR AND DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

371
BELT CONVEYOR
90' BELT CONVEYOR/8"WIDE/ 6" BELT GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

372
BELT CONVEYOR
45'X16" BELT CONVEYOR WITH GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

373
SHAKER SCREEN
36"X18" SAW DUST SHAKER SCREEN WITH DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

374
DUST CONVEYOR
12'X12" PLEATED SAW DUST CONVEYOR;GEAR MOTOR DRIVE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

375
BARN SWEEP CONVEYOR
CORNELL 35'X42 BARN SWEEP CONVEYOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

376
CONVEYOR
APPROX. 100' CONVEYOR WITH 110 LADDER BACK CHAIN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

377
CHIP BIN
ROYAL CHIP BIN, WITH HYD. UNIT, THIS IS A VERY NICE BIN.
14'X16' (approx. 21 unit capacity)
,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

378
AIR COMPRESSOR
INGERSOLL RAND SSR-3P75 AIR COMPRESSOR, 75 HP MOTOR (17704 HRS) CONTROLS AS MARKED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

379
AIR COMPRESSOR
SULLAIR LS-1250HACAC AIR COMPRESSOR WITH 50 HP MOTOR; CONTROLS ATTACHED TO DISCONNECT; NO SWITCHES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380
AIR TANK
RESERVE AIR TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

380A
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING
AIRLINES, AIR HOSES, AIR HOSE REELS IN SAWMILL BUILDING ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

381
STAGE STARTER DISCONNECT
TOSHIBA SIZE 5 STAGE STARTER 600 AMP DISCONNECT, 460 VOLT, 60 KVAR CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

382
SOFT START
ALLEN BRADLEY SOFT START FOR 150 HP MOTOR; NO DISCONNECT WITH CIRCUIT BREAKER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

383
MOTOR CONTROL PANEL
MOTOR CONTROL PANEL WITH 7.5 KVAR INCLUDES SHUT OFF CAPACITOR ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393A
6" VICE WITH ROLL AROUND METAL TABLE
6" VICE WITH ROLL AROUND METAL TABLE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

384
ELECTRIC SHUT OFFS
ELECTRIC SHUT OFFS AS MARKED (400-20 AMP) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393C
CHIPPER KNIVES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

385
STARTER
SQUARE D SIZE 4 STARTER WITH BUILT IN 225 AMP DISCONNECT. NO WIRE OR CONDUIT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393E
PERSONEL FAN
PERSONEL FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

386
CAPACITOR BANK
AUTOVAR 300 KVAR POWER CAPACITOR BANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393F
BOX FAN
BOX FAN ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

387
ELECTRIC PANELS
ELECTRIC PANELS AS MARKED UNDER MILL ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

388
ELECTRIC PANELS
ELECTRIC PANELS UNDER MILL AND EDGER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393D
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE
PITTSBURG HEAVY DUTY 1 TON FOLDING SHOP CRANE ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389A
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

389B
AIR SWAGE IN FILE ROOM AT J. CREEK
AIR SWAGE IN FILE ROOM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

390
DUST FILTER
DUSTKOP DUST FILTER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

391
HAMMERING STATION
ARMSTRONG HAMMERING STATION INCLUDES ARMSTRONG #5 STRETCHER ROLL (SN: 15842) HAMMERING BLOCK, STAND AND ROLLERS INCLUDES ARMSTRONG WELDING CLAMP ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

392
BLOCK GRINDER
MCDONOUGH GUIDE BLOCK GRINDER (SN: BDM655) ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393
CHIPPER KNIFE GRINDER
HANCHETT CHIPPER KNIFE GRINDER ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

393B
(8) 9.75" MCDONOUGH BAND SAW BLADES
(8) 9.75" MCDONOUGH BAND SAW BLADES ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394
DIP TANK
MONTICELLO 20' DIP TANK INCLUDES HYDRAULIC LIFT, SELF CONTAINED ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394A
LUMBER DIPPING STATION FOR DIP TANK
LUMBER DIPPING STATION FOR DIP TANK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394B
4'X8' MAN LIFT PLATFORM
4'X8' MAN LIFT PLATFORM ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394C
LIFTING EXTENSION FOR FORKLIFT
LIFTING EXTENSION FOR FORKLIFT ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394D
Precision SHAKER SCREEN
6'X6' SHAKER SCREEN AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

394E
AIR DRYER
Located at 4595 Jonathan Creek Road Waynesville NC 28785

394F
RESERVE AIR TANK
RESERVE AIR TANK LOCATED IN BACK SHOP AT J. CREEK ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

395
(14) ROLLS+B2:B17 5/8 GREEN STRAPPING

395A
MISC ROLLERS AND ELEC. MOTOR 10 HP

395A
Parts room and rack outside at J Creek

400
JOCAR HORIZONTAL BAND RESAW
JOCAR HORIZONTAL BAND RESAW 55" WHEELER, 8" FACE 1 1/8" THICKNESS, CHAIN FEED WITH 2 HYD. HOLD DOWN ROLLERS, PUSH BUTTON CONTROLS, DIRECT LOGIC 06 CONTROLLER. 5-6 3/4" BAND SAW BLADES, 100 HP MOTOR, 30 HP HYDRAULIC PACK AND CONTROLS AS MARKED, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

401
15' 4 STRAND DECK WITH H-78 CHAIN
15' 4 STRAND DECK WITH H-78 CHAIN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395B
SKID MISC CHAIN

402
16' INFEED ROLLCASE
16' INFEED ROLLCASE WITH 11-8X30" ROLLS, 3 AIR OPERATED OP UP CRADDLE TYPE TRUNERS EACH WITH THEIR OWN ELECTRIC DRIVE, ROLL CASE HYDRAULIC DRIVEN, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

403
18' OUTFEED ROLLCASE
18' OUTFEED ROLLCASE WITH (8) 6X38" ROLLS, 4 CHAIN ARM JUMP UP TRANSFER AND 4 ARM SKATE ROLLE TIPPLE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395C
SKID MISC PULLEYS

404
DOUBLE SEPARATION SYSTEM
DOUBLE SEPARATION SYSTEM,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

405
4 STRAND TRANSFER DECK
4 STRAND TRANSFER DECK, H-78 CHAIN; DRIVE; 4 ARM JUMP UP TRANSFER,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395D
MISC CONVEYOR BELT

406
50' RETURN ROLLCASE
50' RETURN ROLLCASE WITH (25) 6X24" LIVE ROLLS, 4 ARM JUMP UP TRANSFER, HYDRAULIC DRIVE,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

407
LIGNA HYDRAULIC PACK
LIGNA HYDRAULIC PACK,Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395E
4'X7' STEEL WELDING TABLE WITH VICE

408
TIE BACK OF 400-407 WITH A 10% RAISE
TIE BACK OF 400-407 WITH A 10% RAISE , Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

409
WEBSTER VIBRATING CONVEYOR
WEBSTER VIBRATING CONVEYOR MODEL 18/27, 18"X45’  10" FLARED SIDES, NO DRIVE, Item located at 1429 Old Hwy. 16 Jefferson NC 28640 and can be previewed anytime between the hours of 9 - 5

395F
OLDER LINCOLN WELDER-STICK

425
48" 3HD Salem Carriage
Linear positioning, Saw Cab W/ controls, weighs aprox 25,000 lbs, Good Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

426
Track & Frame
Approx 60' Track, 64" center to center, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395G
WALL OF SHELVES/MISC. BEARINGS/CHAIN

427
Tyrone-Berry 285 Hydraulic Feed
Tyrone-Berry 285 Shotgun Feed Carriage Drive with 150 hp Motor, 40' Cylinders, No Pump! Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

428
6' Prescott vertical Band Saw
12" blade, Weight Strain, Working Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395H
NEW DEBARKER BEARINGS AND WHEELS

429
INOVEC Light Curtain Scanner System
Comes with YieldMaster 386 control Box, Good Condition, will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

430
Tie Back
425,426, 427, 428, 429, Will be sold off site, lots can be inspected at 249 Banco sawmill Rd. Burnsville, NC 28714

395I
SHELVES W/ MISC PIPE PARTS AND MIS MISC

431
7' Prescott Resaw
comes with Cab and controls, weight Strain blade tension, 10" blade, No.218-M.S. 8737, Fair Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

432
48" Corley Edger
52" x 12' infeed, 12" x 22' Tailing Belt, Missing Blades, Good Working Condition
Located at: 249 Banco Sawmill RD Burnsville NC 28714

395J
WORKBENCH AND SHELF FULL OF MISC PARTS, GEAR BOXES, BEARINGS

433
Spiral Roll Case
30" x 8' Live Roll Case, Heavy Duty, Good Working Con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714

434
Roll Case
30" x 52' Live Roll Case, Heavy Duty, Good working con.
Located at: 249 Banco Sawmill RD Burnsville NC 28714 

395K
SHELF W/ MISC SPROCKETS, CHAIN

435
Transfer Deck*
4-strand 10' long x 12' wide, electric drive 2hp motor, sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good working Condition

436
Transfer Deck*
4-strand 20' long x 10' wide, no drive, Sold off site at 249 Banco Sawmill Rd Burnsville, NC 28714, working Condition

395L
SHELVES OF NEW SPROCKETS, BEARINGS

437
Log Deck*
3-strand 34' long x 10' wide, 7 hp electric drive, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condion

438
Steel WalkWay*
30' x 20' x 60" high steel walkway 30" x 48" Platform with stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

395M
PILE OF HYDRAULIC HOSES

439
Steel WalkWay*
30" x 20' x 48" high, with two stairs, Sold off Site at 249 Banco Sawmill Rd Burnsville, NC 28714, Good Condition

440
Belt Conveyor*
36" x 12', no drive, sold off site at 249 banco sawmill rd Burnsville, NC 28714, working condition

395N
PARTS WASHER

441
Green Chain*
4-strand ,100' x 12' Heavy Duty, electric drive, has been partly disassembled. Sold off site at 249 banco sawmill rd Burnsville, NC 28714

442
Roll Case*
30" x approx 20', Live Roll Case, no drive, They are on the outside of the building, sold off site at 249 banco sawmill rd Burnsville, NC 28714, Good Condition

395O
COMPLETE ROOM OF CONTENTS, BELTS, BOLT BIN LOADED, BEARINGS

443
Bar Type Log Turner*
Good Working Condition, Sold off site at 1960 US 19E Burnsville,NC 28714

444
2009 Salsco 40" Shaving Mill*
2009 40" Salsco Shaving Mill, 127 hp Cat Engine, just under 2000 hrs, 3-Belt Conveyors , 15" x 10' , 15" x 20' and 30" x 30', everything is in excellent Condition, Will be sold off site at 2130 Fruitland Rd, Hendersonville, NC 28792, Sells with Reserve.

395P
SHELVES OF MISC/ BRAND NEW CHAIN

445
Extrema MXP-255 24" Planer
Double Surfacer, Helical Heads, Carbide Inserts, Digital Setworks, Power Thickness Controls, 30hp Top, 20hp bottem head, Manuals, tools, Extra Knives Included, bought new and running when removed 5/2020. will be sold off site. Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

446
Newman Whitney S-282 Planer*
18" Serial# 14433, Will be sold off site!, was never installed by owner, considers it for parts, Can be inspected at ;Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395Q
CABINET AND MISC WELDING RODS/LOADED

447
Easi 18' Lumber Conveyor System
24" wide, w/new belt, 1hp motor, infeed to Planer, will be sold off site, Good Working Condition. Can Be Inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

448
2004 Invicta Sliding Table Shaper
TI-14 v.04, Pro Scale Digital Readout for spindle adjustment, Movable spindle used for End Matching Flooring, Will be sold off site, Good Working Condition. Can be inspected at Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone # 828-926-1621

395R
WORKBENCH AND ALL TOOLS/MISC ON BENCH

448A
2004 Invicta Sliding Table Shaper

449
Denailing Punch Machine
2004 OSHA Guarded Hands Free Punch for Denailing Boards, Will be sold off Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395S
SHELVES FULL OF MISC MILL PARTS

450
Tennant 255 Floor Sweeper
Propane, Rider, Serial# HD-1543, low hrs 3998. Will be Sold OFF Site!, Good Working Condition. Can be inspected at; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

451
2- Pallets of assorted Motors and Gear Boxes
Browning helical reducer with 3hp motor, High Efficiency Motor, 40 hp, 3 pieces each, motor and gear reducer units, Will BE SOLD OFF SITE!, Good Working Condition. Can be inspected at ; Oaks Unlimited, 3530 Jonathan Creek Rd, Waynesville, NC 28785. Phone# 828-926-1621

395T
DEBARKER HEAD

452
Corley Carriage*
3 HB, sells w-62' of track, frame, drive and Berry feed, serial # 30-TD-042 sells with lots of new parts. 

2020
VOLVO L120 ARTICULATING LOADER
WHEEL LOADER (SN: VCEL120HJ0S632242) 4117 HOURS, KILL SWITCH, FULLY ENCLOSED, 23.5R25 TIRES, CLIMATE CONTROLLED CAB,

453
Air Tek Dryer
Serial # 0403 Model # JL1000FHT, 200 PSI, w-control center and service disc. very nice unit.

395U
STEEL RACK

454
Air Dryer Ingersoll Rand
Serial # 892HG1148 Model # HG201E5 was working well when taken out of production.

455
CompAir Compressor
50 HP Ser. # 2HB 546823 Mod. # 218 nice unit.

456
Millermatic 250 Welder
wire welder. No tank.

457
Miller Arc Welder
Model SRH-333, electric

457A
Screw Air Compressor*
50 hp electric motor

500
LOG DECK
THURSDAY AUCTION STARTS HERE
24'X12' - 4 STRAND, 5 ARM STOP & LOADER; INCLUDES 1ST HORIZONTAL SUPPORT BEAM, 20 HP GEAR MOTOR DRIVE, BUILT TO LAST AND IN GOOD CON. 
The first of an entirety.

501
LOG TROUGH
28'  WITH 120 LADDER BACK CHAIN, W-ELECTRIC DRIVE

502
NICHOLSON A6 RING DEBARKER
 SIZE 35" AC LEFT HAND, CHAIN FEED (SN N7631), MFG: 2010 SYDNEY, BRITISH COLUMBIA; INCLUDES 30 HP HYDRAULIC PACK, 100 HP TECO WESTINGHOUSE MOTOR, 30 HP MOTOR FOR INFEED, CONTROLS IN CAB AS MARKED, ONE OWNER! SERVICED BY NICHOLSON, THIS IS RARE OPPORTUNITY!! VERY NICE MACHINE.

502A
ALLEN BRADELY STARTER
100 HP SMC-FLEX SOFTSTART STARTER CUTLER HAMMER, 150 AMP DISCONNECT. DOES NOT INCLUDE CABINET. NO WIRE OR CONDUIT INCLUDED

503
LOG TROUGH
29', OUTFEED WITH 120 LADDER BACK CHAIN, 4 ARM LOG KICKER; S CONSTRUCTION DRIVE, 10HP GEAR MOTOR DRIVE

504
TIE BACK
OF LOTS 500-503 TOGETHER WITH 10% RAISE

504A
Nicholson Debarker Parts
Brand New

504B
Cyclo 6000 Gear Box
Brand New! Serial KY0030270
Will fit on Nicholson debarker for log infeed/outfeed.

505
LOG DECK
39'X12' 4 STRAND, STOP & LOADER WITH W82 CHAIN, 20HP MOTOR, FAULK GEAR BOX, SUPPORTS TO 2ND HORIZONTAL BEAM

506
HMC ROSSERHEAD DEBARKER
42'' HEAVY DUTY, 60 HP ELECTRIC MOTOR; SELF CONTAINED HYDRAULIC SYSTEM, SLANT TRACK, CONTROL CHAIR IN CAB AS MARKED. NO SUPPORT STEEL, THIS DEBARKER IS IN VERY GOOD CONDITION.

506A
ALLEN BRADELY STARTER
SIZE 3, CUTLER HAMMER 150 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED.

507
LOG DECK
16'X11' - 4 STRAND WITH W 82 CHAIN, GEAR MOTOR DRIVE. NO SUPPORT STEEL

508
LOG TROUGH
30' WITH 120 LADDER BACK CHAIN, S DRIVE CONTRUCTION, 10 HP GEAR MOTOR DRIVE. NO SUPPORT STEEL

509
FORTRESS LOG METAL DETECTOR
48"X48"; 23' RENS FIBERGLASS SECTION WITH BELT, TAKES 48" LOG, INCLUDES CONTROLS AS MARKED IN CAB, 10 HP GEAR MOTOR DRIVE. SUPPORT TO 1ST HORIZONAL I BEAM

510
LOG TROUGH
55' SALEM, 5 ARM REJECT LOG KICKER OUTSIDE OF BUILDING, 2 SETS OF 5 ARM LOG KICKER INSIDE BUILDING FOR 2 WAY LOG DISTRIBUTION. INCLUDES SLIDE PLATE AND BIN FOR REJECT LOGS. STEEL SUPPORT TO GROUND AS MARKED. EXTREMELY HEAVY DUTY AND IN EXCELLENT CONDITION.

511
BARK CONVEYOR
65' X 18", UNDER NICHOLAS DEBARKER WITH 110 LADDER BACK DRAG CHAIN, 10 HP GEAR MOTOR DRIVE. 6" SUPPORT BEAMS ONLY

512
BARK CONVEYOR
32', UNDER HMC DEBARKER WITH 110 LADDER BACK CHAIN

513
BARK CONVEYOR
80' , WITH DUAL 110 LADDER BACK CHAIN, 20 HP GEAR MOTOR DRIVE. TO THE HOG 6" SUPPORT LEGS ONLY

514
SALEM GRINDER
24'X30",  BOTTOM DISCHARGE INCLUDES HOPPER. NO MOTOR. NO SUPPORT STEEL.

514A
PALLET OF SWINGING HAMMERS FOR HOG

515
TECO WESTINGHOUSE MOTOR
150 HP ELECTRIC. FRAME 445T, RPM 1775

515A
ALLEN BRADLEY SOFT STARTER
SMC-FLEX 150 HP SOFT START STARTER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

516
DUAL TRAILER LOAD OUT SYSTEM
WITH 36' AUGER SYSTEM, AIR OPERATED DIVERTER CHUTE. SUPPORT TO GROUND, SUPPORT STEEL UNDER BARK SYSTEM

2042
NEW SHOP BUILT 8'X20' DIP TANK WITH LIFT
NEW SHOP BUILT 8X20' DIP TAND WITH LIFT. NO HYD. PACK

517
BARK CONVEYOR
APPROX. 90' WITH 110 LADDER BACK CHAIN, TO TRAILER LOAD SYSTEM, 20 HP GEAR MOTOR DRIVE, 

518
MISC. ELECTRIC BOXES
AT HOG SYSTEM (2) 20 AMP, (2) 30 AMP, NO WIRE OR CONDUIT INCLUDED

519
SUPPORT STEEL
UNDER HOG AND BARK CONVEYOR AS MARKED

520
SUPPORT STEEL
UNDER DEBARKER SYSTEM, CATWALK AS MARKED, STEEL PLATES AS MARKED

521
RESERVE TANK
RESERVE AIR TANK AT METAL DEDECTOR

522
CAMERA SYSTEM
WITH ## CAMERAS, VISIO DISPLAY

523
ALLEN BRADLEY ELECTRICAL
SYSTEM IN SALEM BOX IN SAWYER'S CAB

524
ALLEN BRADLEY ELECTRICAL
PANEL AS MARKED

525
SAWYER'S CAB
(12'X8') CLIMATE CONTROLLED AT DEBARKER

526
ALLEN BRADLEY ELECTRICAL
MCC 800 AMP PANEL INCLUDES TRANSFORMER AND DISCONNECT BUT DOES NOT INCLUDES STARTERS AS MARKED

527
ALLEN BRADLEY POWER FLEX
700 VARIABLE FEED DRIVE

528
ALLEN BRADLEY STARTER AND DISCONNECT
SIZE 2

529
CONTROL BOXES AS MARKED
.

530
STEEL BUILDING
8'X10',  AT DEBARKER SHED

531
SAFETY SWITCHES
(8) MISC SAFETY SWITCHES

532
HYDRAULIC PACK
FOR PARTS WITH 30 HP MOTOR AND ELECTRICAL ATTACHED

533
OPEN SPAN BUILDING
30'X50' PREFAB, OVER DEBARKER INCLUDES LIGHTS

533A
LOG SPRINKLER SYSTEM
LOG SPRINKLER SYSTEM TO INCLUDE 60 HP WATE PUMT AT POND AND DISCONNECT AS MEARKED; (3) SPRINKLER HEADS AND STANDS AS MARKED ON YARD, SPRINLER HEAD ON PALLET AS MARKED

534
LOG DECK
28'X12' 3 STRAND HEAVY DUTY LOG DECK WITH CHAIN, 20 HP GEAR MOTOR DRIVE, 4 ARM STOP AND LOADER. SUPPORTS TO HORIZONTAL BEAM

535
SALEM BAR TYPE LOG TURNER
(SN: 19910 04) INCLUDES 30 HP. SALEM HYDRAULIC PACK, CONTROLS IN CAB.
The first of an entirety.

536
SALEM CARRIAGE
3  HEAD BLOCK LINEAL POSITION VERTICAL SLANT CARRIAGE (16') (SN: 201541-05) ,INCLUDES 60' TRACK AND CRUY END BUMPERS, CABLE TIGHTENER. CLIMATE CONTROLLED SAWYERS CAB (12'X5')

536A
MASS SETWORKS
MASS SETWORKS TO INCLUDE CONTROLS IN CAB AND SCANNER ABOVE CARRIAGE, late model!

537
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES PARKER SSD690 DRIVE MOTOR CONTROLS
ACDC 242 HP FREQUENCY CARRIAGE DRIVE WITH CABLE AND DRUM INCLUDES  PARKER SSD690 DRIVE MOTOR CONTROLS  
INCLUDES WIRE FROM MOTOR TO STARTER.

538
SALEM BAND MILL
6’ RIGHT HAND VERTICAL SLANT BAND MILL (SN: R12798987); AIR STRAIN, 11" FACE, 1 1/4 THICKNESS

539
WEG NEMA PREMIUM MOTOR
1191 RPM, 200 HP, FRAME 504, NO MOTOR CONTROLS INCLUDED

539A
SQUARE D SIZE 6 STARTER
.

540
SLAB DROP
12" X 32", WITH 4 ARM AIR OPERATED EASE OFF

541
TIE BACK
OF LOTS 535-540 WITH 10% RAISE

541A
NEW DRUM SHEAVE FOR CARRIAGE DRIVE*
NEW DRUM SHEAVE FOR CARRIAGE DRIVE, Was Lot 537B

542
ROLLCASE
30', WITH (11) 30'X9" ROLLS, NO DRIVE, AIR STOP. (4) 4 ARM POP UP CHAIN ( BREAK CHAIN- NO SPROCKET)

543
ROLLCASE
20', WITH (7) 30" X9" ROLLS, 7.5 HP GEAR MOTOR DRIVE WITH 6' 4 STRAND POP UP TRANSFER, AIR STOP, GEAR MOTOR AND DRIVE

544
LOG DECK
12'X34' 4 STRAND, 5 ARM STOP AND LOADER, 20 HP GEAR MOTOR DRIVE; SUPPORTS TO HORIZONTAL BEAM

545
COOPER SCRAGG
END DOGGING SCRAGG, WITH COOPER COMPUTERIZED SETWORKS, (2) 150 HP MOTORS, CAB AND CONTROLS AS MARKED. INCLUDES (2) 56" F7 SAWS ON MACHINE

545A
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545B
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545C
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545D
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

545E
SAW BLADE
B7 BLADE FOR COOPER SCRAGG

546
(2) WEG SOFT START STARTERS
SSW 07, STARTERS FOR 150 HP MOTOR

547
ALLEN BRADLEY ELECTRICAL
1200 AMP CENTER LINE MCC PANEL. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

548
ROLLCASE
14', WITH 8 (74"X9") ROLLS; 5 AIR OPERATED JUMP UP TRANSFER CHAINS (9').

549
COOPER TRANSFER DECK
10'X14', SLANT BED, GEAR MOTOR DRIVE.

550
ROLLCASE
17', WITH 8 (54"X8") SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

551
ROLLCASE
24', WITH 9 (30"X8") (5 ROLLS ARE SPIRAL) ROLLS WITH 1 AIR STOP. GEAR MOTOR DRIVE

552
ROLLCASE
43', WITH 15 (30"X9") (10 ROLLS ARE SPIRAL) ROLLS GEAR MOTOR DRIVE

553
TRANSFER DECK
14'X9' - 4 STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

554
BELT CONVEYOR
23', WITH 20" BELT. GEAR MOTOR DRIVE

555
ROLLCASE
28', WITH 10 (36"X8") ROLLS, GEAR MOTOR DRIVE

556
SAW CRANE
WITH PETERSBURG ELECTRIC WINCH

557
LUMBER TRANSFER DECK
22'X11'- 5 STRAND, WITH H78A ROOF TOP CHAIN. 3'- 5 STRAND TIPPLE, 5 HP GEAR MOTOR DRIVE. SUPPORT TO HORIZONTAL BEAM
The first of an entirety.

557A
GRAVITY ROLL CASE
8'X18" GRAVITY ROLL CASE

558
LUMBER TRANSFER DECK
20' - 5 STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, 5 HP GEAR MOTOR DRIVE. 4'- 5 STRAND POP UP TIPPLE DEVICE. SUPPORTS TO HORIZONTAL BEAM

559
SALEM LUMBER TRANSFER DECK
18'X11' 4 STRAND, WITH H78 CHAIN, AIR STOP PINS, 4 ARM STOP AND LOADER, GEAR MOTOR DRIVE.

560
SALEM INFEED
13' INFEED TO HORIZONTAL RESAW. 5 (34"X9") ROLLS, 6'- 4 STAND TRANSFER DECK, POP UP CANT TURNER, 4 ARM CANT KICKER

561
SALEM BAND RESAW
2004, 6', RIGHT HAND HORIZONTAL, (SN: 198096R04) FACE 11', THICKNESS 1 3/8"; INCLUDES CONTROLS IN CAB AND CAB. 25 HP HYDRAULIC PACK, WORKS FOR 3 OR 4 SIDED. ALSO MADE TO CONVERT TO A HEAD RIG!
VERY GOOD SAW.

562
WORLD WIDE INDUSTRIAL ELECTRICAL MOTOR
200 HP, 449T, 891 RPM

562A
ALLEN BRADLEY SOFT START
SMC-FLEX SERIES B, MAX 250 HP, SOFT START STARTER WITH CUTLER HAMMER 600 AMP DISCONNECT. NO WIRE OR CONDUIT INCLUDED

563
SALEM OUTFEED
20' OUTFEED ROLLCASE WITH 9 (36"X9") ROLLS INCLUDES (5) 6' AIR POP UP TRANSFER CHAIN, HYDRAULIC DRIVE, AND POP UP BOARD STOP

564
SALEM TRANSFER DECK
12' X 25' 5- STRAND, WITH H78 CHAIN; 5 STRAND SCAPE ROLL INCLUDES 3 WAY SORT

565
BELT CONVEYOR
32', WITH 30" BELT, GEAR MOTOR DRIVE. INCLUDES LEGS TO GRADING

566
TIE BACK
OF 557-565 WITH 10% RAISE

567
SALEM TRANSFER DECK
16'X12', GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

568
BELT CONVEYOR
18', WITH 30" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

569
BELT CONVEYOR
40', WITH 28" BELT, GEAR MOTOR DRIVE. STEEL TO HORIZONTAL BEAM

570
SALEM TRANSFER DECK
27'X11' 4 STRAND LUMBER, WITH H78 CHAIN, SMCYCLO GEAR MOTOR DRIVE

571
TRANSFER DECK
36'X11' 4 STRAND, WITH H78B ROOF TOP CHAIN, SMCYCLO GEAR MOTOR DRIVE

574E
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574D
Sheffer air cylinder
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

572
TRANSFER DECK
31'X13' 7-STRAND, WITH 81X CHAIN, GEAR MOTOR DRIVE

573
BAR TYPE UNSCRAMBLER
18'x 5', WITH 18' EVENENDER ROLLS

574
BAXLEY EQUIPMENT EDGER
2011, COMPANY HIGH SPEED OPTIMIZED EDGER SYSTEM TO INCLUDE BUT NOT LIMITED TO: 25' INFEED LUMBER DECK SYSTEM WITH (7) 2' JUMP UP TIPPLES, 7' 8-STRAND TRANSFER WITH 3 SETS 8-ARM LUMBER STOPS, GEAR MOTOR DRIVE, 16' 8-STRAND LUMBER TRANSFER WITH GEAR MOTOR DRIVE, EVENENDER ROLLCASE AND (7) (60"X6") ROLLS, GEAR MOTOR DRIVE, BAXLEY LUMBER SCANNING SYSTEM WITH DYNAVISION LASER TECHNOLOGY, ALL SOFTWARE AND COMPUTERS. BAXLEY 20'HIGH SPEED INFEED WITH SHARP CHAIN, (4) HYD. HOLD DOWN ROLLS. BAXLEY HIGH SPEED 3 GUIDED SAW HIGH SPEED EDGER, 250 HP MOTOR. BAXLEY 22'X48" OUTFEED BELT CONVEYOR, GEAR MOTOR DRIVE. 25 HP HYD. PACK, COOLING AND CLEANING FAN FOR LASERS. NO MAIN MOTOR CONTROLS. COMPLETE PACKAGE IN GOOD CONDITION! ONE OWNER!

574A
ALLEN BRADLEY SOFT START STARTER
SMC-FLEX SERIES B 300 HP MAX, WITH CABINET INCLUDES GE 400 AMP SWITCH

574B
ALLEN BRADLEY CENTER LINE
MCC PANEL

574C
SAWS AND SAW GUIDES
SAW GUIDES AND SAW BLADES.

574d
Sheffer air cylinder
48” air cylinder for Baxley Edger in feed

574DD
SHEFFER AIR CYLINDER
48” air cylinder that fits in the infeed for Baxley high speed edger. It is located in the parts room behind main office

574e
Mitsubishi Air condition unit
Mitsubishi Mr Slim E410A split unit air conditioner

575
BELT CONVEYOR
18', WITH 42" BELT, SUMITOMO GEAR MOTOR DRIVE

576
TRANSFER DECK
42'X13' 6-STRAND LUMBER, (5 STRANDS WITH C55D CHAIN), SMCYCLO GEAR MOTOR DRIVE

577
BELT CONVEYOR
32', WITH 24" BELT, SUMITOMO GEAR MOTOR DRIVE

578
SALEM TRANSFER DECK
13'X10.5' 4-STRAND LUMBER, WITH H78 CHAIN, 4 AIR STOPS, GEAR MOTOR DRIVE

579
SALEM TRANSFER DECK
16'X11' 4-STRAND,  WITH H78B CHAIN, 4 BAR STOP AND LOAD, SMCLCLO GEAR MOTOR DRIVE

580
SALEM COMBINATION GANG/EDGER
10", 18" GANG SIDE, 32" EDGER SIDE, 10" TOP OF BLADE TO SHAFT. INCLUDES INFEED, CANT POSITIONING ROLLER, CANT TURNER, WITH LIVE LINE BAR, LASER LIGHT GUIDE SYSTEM (NO LASER LIGHTS) (SN: 69890-95) DOES NOT INCLUDE MAIN ARBOR MOTORS. DOES INCLUDE HYDRAULIC UNIT AND OILING SYSTEM

580A
FILE ROOM SAW GUIDES FOR GANG
SAW GUIDES FOR GANG AND MAINTENANCE PARTS IN FILE ROOM

580B
SAFETY SWITCHES
(2) 100 AMP SAFETY SWITCHES; (1) 30 AMP SAFETY SWITCH

581
LAHARCO LASER LIGHT
(1) 

582
LAHARCO LASER LIGHT
(1) 

583
150 HP MOTOR
HIGH EFFICIENCY, 1775 RPM, 444T FRAME

584
BALDOR 150 MOTOR
150 HP ELECTRIC, 1780 RPM, 445T FRAME. NO MOTOR CONTROLS

585
ROLLCASE
26', WITH 10 (25"X6") ROLLS, 3 HP GEAR MOTOR DRIVE

585A
DAYTON 30 KW HEATER

585B
SCHAFFER 4X4' BOX FAN

586
TRANSFER DECK
15'X13' 5-STRAND,  (4 STRAND: H78B CHAIN, 1 STRAND H78 CHAIN), GEAR MOTOR DRIVE

587
SALEM UNSCRAMBLER
13' WIDE, BAR CHAIN TYPLE, SMCYCLO GEAR MOTOR DRIVE

588
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

589
BELT CONVEYOR
22', WITH 20" BELT, SORT ON ARM, SMCLCLO GEAR MOTOR DRIVE

590
BUCHER HYDRAULIC PACK
12 VOLT HYDRAULIC POWER PACK INCLUDES 12 VOLT BATTERY. MODEL: M3551-0219 AND CONTROLS

591
PUSH BUTTON CONTROL PANEL
(3) 30 AMP SAFETY SWITCHES

592
ROLLCASE
18',  8 (24"X7" SPIRAL ROLLS, GEAR MOTOR DRIVE. NO SUPPORT STEEL

593
BELT CONVEYOR
34', WITH 24" BELT, SMCYCLO GEAR MOTOR DRIVE; 11' PARTIAL INCLINE, STEEL SUPPORT TO FLOOR

594
BELT CONVEYOR
24', WITH 30" BELT, SMCYCLO GEAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

595
BELT CONVEYOR
34', WITH 17" BELT, SMCYCLO GREAR MOTOR DRIVE. STEEL SUPPORT TO FLOOR

596
TRANSFER DECK
34' - 4 STRAND, WITH 81X CHAIN, 4 ARM STOP. GEAR MOTOR DRIVE

597
ROLLCASE
25', CONVEYOR 12 (20"X9" ROLLS. NO DRIVE

598
BREWER DOUBLE ARBOR GANG
MODEL BR-81245-P (SN: 113090) WITH SIZER HEAD, CONTROL BOX. 12' INFEED ROLLCASE 13(27"X5") ROLLS (NO DRIVE). INCLUDES HYDRAULIC PACK, 10 HP MOTOR, 60 HP TOP ARBOR, 100 HP BOTTOM ARBOR, 50 HP SIZER HEAD. WITH MOTOR CONTROLS AS MARKED. THIS UNIT IS IN CLOSE TO NEW CONDITION!

598A
ROLL AROUND TABLE
30"X60" ROLL AROUND TABLE

599
OUTFEED ROLLCASE
14', WITH 8 (24" X6" ) ROLLS. GEAR REDUCTION DRIVE

600
SAWS AND SPACERS
FOR GANG

600A
(3) ROLLS OF BELT

600B
ROLL 600 VOLT WIRE

601
SALEM BELT CONVEYOR
78', WITH 29" BELT. GEAR MOTOR DRIVE

602
LUMBER TRANSFER DECK
65'X13' 6-STRAND, WITH C550 ROOF TOP CHAIN. SYCYCLO GEAR MOTOR DRIVE

603
POP UP TRANSFER DECK
24'X11.5' 4-STRAND, WITH H78C CHAIN, S DRIVE CONSTRUCTION, 1 DRIVE, 1 SHAFT, NO TAIL SHAFT WITH DRIVE
The first of an entirety 

604
POP UP TRANSFER DECK
18' TRANSFER ROLLCASE WITH (36"X10") ROLLS WITH 6' 4 STRAND POP UP TRANSFER, 1 SHAFT, BREAK CHAINS AT 605

605
SALEM TRANSFER DECK
27'X11' 4-STRAND, WITH H78 CHAIN AND (7) 3 ARM AIR STOPS, SENSOR EYES, S DRIVE CONSTRUCTION, GEAR MOTOR DRIVE, NO TAIL SHAFT

606
SALEM LIVE LINE BAR INFEED
20'WITH 7 (36"X10") ROLLS. 4 ARM POP UP EVENENDER ROLLS TRANSFER, CANT TURNER, 4 POP UP CANT HOLDERS

607
SALEM LEFT HAND LINE BAR RESAW
6',  (SN L15286681) 11" FACE, 1 1/8" THICKNESS ON WHEELS, 8' LIVE LINE BAR, AIR STRAIN, NO MAIN MOTOR, NO HYDRAULIC SUPPLY

608
SALEM OUTFEED
18' ROLLCASE WITH 7 (54"X9") ROLLS. DUAL 4 STRAND POP UP TRANSFER CHAINS

609
150 HP MOTOR
(NO TAG EXACT HP UNKNOWN; RUNS RESAW)

609A
ALLEN BRADLEY SMC FLEX SOFT START STARTER
SERIES A STARTER WITH CUTLER HAMMER 400 AMP DISCONNECT AND CABINET. MAXIMUM 200 HP

610
SALEM HYDRAULIC PACK
30 HP MOTOR AND 10 HP MOTOR WITH PUMP

611
TRANSFER DECK
6'X11' 4 STRAND, GEAR MOTOR DRIVE. NO TAIL SHAFT

612
TRANSFER DECK
3'X10.5, WITH 3' TIPPLE; GEAR MOTOR DRIVE

613
SALEM TRANSFER DECK
19' X11L5', 4 STRAND WITH (4) 4 ARM LUMBER STOPS WITH ELECTRIC EYES, 3' TIPPLE, SMCYCLO GEAR MOTOR DRIVE

614
POP UP ROLLCASE
15' WITH 6 (30"X9") ROLLS, AIR POP UP. GEAR MOTOR DRIVE

615
ROLLCASE
16', 7 (30"X9") ROLLS, ELECTRIC EYES TO STOP, SMCYCLO GEAR MOTOR DRIVE

616
POP UP ROLLCASE
13', WITH 6 (30"X9") ROLLS, AIR CYLINDER POP UPS

617
TIE BACK
OF LOTS 603-616 WITH A 10% RAISE

618
ROLLCASE
25', WITH 9 (54"X7") ROLLS. GEAR MOTOR DRIVE. STEEL TO FLOOR

619
TRANSFER DECK
24'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

620
TRANSFER DECK
25'X13' 5-STRAND TRANSFER DECK WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

621
TRANSFER DECK
25'X13' 5-STRAND, WITH H78A ROOF TOP CHAIN. SMCYCLO GEAR MOTOR DRIVE

622
SALEM UNSCRAMBLER
14' WIDE

623
CARBOTECH TRIM SAW
INTERNATIONAL 22' TRIM SAW MACHINE #10-214-110, 17 SAWS, WILL INCLUDE INFEED SECTION WITH 9'X22' EVENER ROLLCASE, EXCELLENT CONDITION.
The first of an entirety. 

623A
SALEM BELT CONVEYOR
24'x 30" BELT, GEARMOTOR DRIVE, UNDER TRIM SAW

624
BAXLEY OPTIMIZING SCANNER
22' PASS, INCLUDES HYDRAULIC PACK. DYNA VISION, SCANNERS WITH COMPUTERS/SOFTWARE IN OPERATOR'S OFFICE, COOLING AND CLEANING BLOWER IN BASEMENT AS MARKED, THIS UNIT IS IN EXCELLENT CONDITION!

625
LUCIDYNE TECHNOLOGIES GRADE MAR READER
WITH CONTROLS IN ELECTRICAL ROOM, COMPUTER SYSTEM AS MARKED

626
TRANSFER DECK
As marked.

2021
VOLVO MODEL 82041 7 METER BUCKET
(SN: 7024-00420) QUICK COUPLER

627
INFEED OVERALL SECTION
42', INCLUDES SALEM SPIRAL ROLLCASE WITH 6 (5'X12") ROLLS; GEAR MOTOR DRIVE TO A 6' TRANSFER LUG LOADER ; INCLUDES 26' LUGGED TRANSFER DECK (NO TAILING SHAFT)

2022
QUICK COUPLE "R" LOG FORK WITH BALE CLAMP
 6' 

628
TIE BACK
TOGETHER 623-627 WITH 10% RAISE, ALL IN EXCELLENT CONDIITON.

629
TRIM SAW OUTFEED
17'X14', WITH 6 STRAND LUGGED TRANSFER 9'X7" EVENER ROLLS, 3' 8-ARM TIPPLE. INCLUDES HYDRAULIC PACK FOR EVENER ROLLS
The first of an entirety.

630
BELT CONVEYOR
20', WITH 29" BELT. GEAR MOTOR CONTROLS

631
TRIM SAW BLADES
(25) RESHARPENED ON WALL. 22" BLADES

632
HI-TECH J-BAR SORTER
42 (4') BINS. INCLUDES HYDRAULIC PACK, ROOF SYSTEMS ATTACHED, CONTROLS IN ELECTRIC ROOM AS MARKED, ATTACHED CATWALK

633
TRANSFER DECK
60' 3-STRAND, WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

634
TRANSFER DECK
70' 3-STRAND,  WITH H78 CHAIN, S DRIVE CONSTRUCTION, SMCYCLO GEAR REDUCTION DRIVE

635
66' 3 STRAND DECK WITH H-78 CHAIN
66' 3 STRAND DECK WITH H-78 CHAIN, S DRIVE CONSTRUCTION, SMCLCLO GREAR REDUCTION DRIVE

636
HI TECH 8' STICKERING STACKER
HI-TECH 8' STICKERING STACKER INCLUDES BUT NOT LIMITED TO 20'X12' 5 STRAND PACKAGE DECK, GEAR REDUCTION DRIVE; H78 CHAIN, NO TAIL SHAFT; 8'X15' 8 STRAND WATERFALL UNSCRAMBLER; EVEN ENDER ROLLS; 5 ARM-8' STICKERING STACKER UNIT; STICKERING STATION, 20'X8' ELEVATOR ROLLCASE

637
40'X8' OUTFEED PACKAGE ROLL OUT WITH DRIVE

638
35' - 5 STRAND PACKAGE DECK
35' -5 STRAND PACKAGE DECK; S DRIVE CONSTRUCTIONS, GEAR MOTOR DRIVE; H78 CHAIN, MOTOR CONTROLS, 75 HP HYD PACK, SALEM 10 HP HYDRAULIC PACK

639
TIE BACK
OF LOTS 629-638 WITH A 10% RAISE

640
MASTER TIE BACK
Lots 628 & 639 
(everything from lot 623 thru 639) 

645
FULGHUM 8 KNIFE
66' 8 KNIFE HFVD (SN: FL-F1L-1702) INCLUDES 2 HP HYDRAULIC PACK FOR CYLYNDAR HOOD LIFT, DISCHARGE PIPE TO CYCLONE. NO MOTOR

645A
CHIPPER KNIVES , HOLDERS AND ANVILS
Will include all knives at and around chipper and inside box

646
TECO 300 HP MOTOR
1780 RPM. BELT STAYS WITH CHIPPER

647
ALLEN BRADLEY SOFT STARTER
300 HP STARTER NO WIRE OR CONDUIT INCLUDED

648
SALEM SHAKER SCREEN
8'X8'

649
8' CYCLONE
NO PIPE

649A
PUSH BUTTON CONTROL STATION FOR CHIPPER SYSTEM
.  

650
BARN SWEEP CHIP CONVEYOR
44'X 6' (26'FLAT, 18' INCLINE); GEAR MOTOR DRIVE

651
CONCAVE BELT CONVEYOR
26', WITH 36" TWEETED BELT. INCLINE AND LEGS INCLUDED. GEAR REDUCTION DRIVE

652
CONCAVE BELT CONVEYOR
110', WITH 36" TWEETED BELT. GEAR REDUCTION DRIVE

653
CONCAVE BELT CONVEYOR
96', WITH 24" TWEETED BELT. GEAR REDUCTION DRIVE

654
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK (LARGEST OF 3)
Approx. 30 unit capacity

655
US METAL WORKS CHIP BIN
NO HYDRAULIC PACK (MIDDLE)
Approx. 21 unit capacity.

656
US METAL WORKS CHIP BIN
WITH HYDRAULIC PACK
Approx. 21 unit capacity.

657
CAROLINA BLOWER COMPANY BLOWER
SIZE 70-6EHD (SN 5786) NO PIPE

658
DUST PIPE WITH STAND
APPROX. 275' OF 29" DUST PIPE WITH STAND AND ALL ELBOWS TO CYCLONE

659
CYCLONE
12', WITH AIR LOCK. NO PIPE

660
WEBSTER VIBRATING CONVEYOR
57',  24" BOTTOM, 10" FLARED SIDES. INCLUDES 12' SCREEN SECTION, 5' FIBERGLASS SECTION, 10 HP DRIVE MOTOR CONTROL, AND CHIPPER CHUTE

661
MDI METAL DETECTOR
.

662
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

663
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
64' WEBSTER VIBRATING CONVEYOR 24" BOTTOM, 10" FLARED SIDES. 10 HP MOTOR DRIVE

663A
Webster Vibrating Conveyor
40' x 24" bottom, 10" flared sides, 5 hp electric drive

664
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
55', 24" BOTTOM, 10" FLARED SIDES. 15 HP MOTOR DRIVE

1054
MARYVILLE AERIAL WORK PLATFORM
1999,MODEL 2033ES, 20' HEIGHT, MAX WEIGHT 750LBS24 VOLTS; (SN: 08802318)
 

665
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
45', 18" BOTTOM, 10 " FLARED SIDES. 3 HP MOTOR DRIVE

1018
TAYLOR MODEL REP-2505 (SN: 5-HS-21948) 25,000 LB CAPACITY, 8'X12" WIDE FORK, SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 19 HRS, SO WILL ESTIMATE 10,091 HRS. CUMMINS ENGINE (OIL CAP MISSING) DUAL FRONT TIRES 10: 00-20 (1-90%, 1-30%, 2-10%) REAR TIRES (1-100%, 1-80%)

666
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
30', 18" BOTTOM, 7" FLARED SIDES. 3 HP MOTOR WITH CUT OFF

1019
TAYLOR MODEL TE250M (SN; H5-21723) 25,000 LB CAPACITY 7'X8" FORKS SIDE SHIFT
SEE THRU MAST, MACHINE SHOWS 2357 HRS, CUMMINS ENGINE DUAL 10: 20 TIRES ON FRONT(2 FRONT: 80%, OTHER 2 20%) (REAR: 60%)

667
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
70', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

668
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
20', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP DRIVE MOTOR WITH CUT OFF

669
WEBSTER VIBRATING CONVEYOR RIGHT SIDE OF MILL
60', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE WITH CUT OFF

670
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
40',  24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

671
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
82', 18" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

672
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
69', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

1023
HYSTER H1100XL 10,000 LB FORKLIFT (SN: F006016061) (NO PLATE FOR SN) 6'X6" FORKS
MACHINE SHOWING 981 HOURS. PERKINS MODEL 1004 ENGINE DUAL FRONT TIRES 8-25-15 (20%)

673
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
75', 24" BOTTOM, 10" FLARED SIDES. 20 HP MOTOR DRIVE

674
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
50', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675
WEBSTER VIBRATING CONVEYOR LEFT SIDE OF MILL
44', 24" BOTTOM, 10" FLARED SIDES. 7.5 HP MOTOR DRIVE

675A
VIBRO MODEL SP-200 VIBRATING MOTOR

675B
Webster Vibrating Conveyor
10ft section, brand new

676
SAW DUST CONVEYOR
13', UNDER VERTICAL RESAW WITH 110 LADDER BACK CHAIN. GEAR MOTOR DRIVE

677
QUINCY AIR COMPRESSOR
MODEL QSI500, 100 HP MOTOR, COOLING FAN, 200 AMP SAFETY SWITCH

678
SULLAIR AIR COMPRESSOR
20-150LACAC24KT WITH 150 HP MOTOR, 400 AMP SAFETY SWITCH

679
SULLAIR AIR COMPRESSOR
MODEL VCC-2005 VARIABLE CAPACITY, 150 HP MOTOR, 400 AMP SAFETY SWITCH

680
PNEUMATICH HEATLESS AIR DRIER SYSTEM
MODEL EH750

681
HANKISON AIR DRIER SYSTEM
HHE-450 AIR DRIER SYSTEM UNDER CARRIAGE DRIVE

682
PATTON'S AIR DRIER SYSTEM
MODEL P80

683
RESERVE AIR TANK
.

684
RESERVE AIR TANK
UNDER COOPER SCRAGG

684A
ALL AIR LINES, AIR HOSES AND AIR VALVES NOT ATTACHED TO EQUIPMENT ALREADY SOLD

684B
CRATE OF MP HUSKEY WIRE TRAYS

685
ALLEN BRADLEY CENTER LINE
MCC PANEL, 1200 AMP NO WIRE OR CONDUIT INCLUDED

686
ALLEN BRADLEY POWER FLEX
700 VARIABLE SPEED DRIVE

687
SAF DRIVE INC SOFT START
OPAL PRO SOFT START. MODEL MS6B-420-C-400 MAX 400 HP "" STARTER ONLY REMOVE FROM CABINET

688
GANG SAW MCCC CONSOLE
INCLUDES ALLEN BRADLEY FRAME B SERIES, VARIABLE SPEED DRIVE. MULTIPLE SWITCHES AND CABINET

688A
ALLEN BRADLEY SMC-FLEX CAT.NO. 150-F201NBD 200v/60HP;480V/150 HP

689
ALLEN BRADLEY CENTER LINE MCC PANEL
1000 AMP. NO WIRE OR CONDUIT INCLUDED

690
ALLEN BRADLEY CENTER LINE MCC PANEL
600 AMP NO WIRE OR CONDUIT INCLUDED

691
ALLEN BRADLEY CENTER LINE MCC PANEL
300 AMP NO WIRE OR CONDUIT INCLUDED

692
POWER FLEX 700 VARIABLE SPEED DRIVES
(5) SERIES B

693
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694
SIEMANS 2000 AMP DISCONNECTS
MAIN ENTRANCE WITH DISCONNECTS TYPE SBA2020 400 VOLT

694A
30 AMP DISCONNECT THROUGH OUT UPPER FLOOR SAWMILL AS MARKED NO WIRE OR CONDUIT

1044A
RAVENS ALUMINIUM FLATBED TRAILER*
WITH BOLTED ON LOG BUNKS

694B
BREAK STATION AT TRIMMER

694C
MILLER THUNDERBOLT XL AC/DC WELDER

695
CAT WALK, STAIRS, CROSSOVERS, SAFETY FENCES
ON MAIN SAWMILL FLOOR. DOES NOT INCLUDE ANY STEPS FROM SAWMILL FLOOR TO CONCRETE BASEMENT AREA

696
ALL STRUCTURE STEEL IN THE MAIN MILL BUILDING
INCLUDING ALL FLOORING AND STRUCTURAL STEEL TO THE CONCRETE, NOT TO BE REMOVED UNTIL ALL ATTACHED EQUIPMENT HAS BEEN REMOVED, BUYERS OF LARGE ATTACHED EQUIPMENT HAVE THE RIGHT TO DISMANTLE IF NECESSARY TO REMOVE THEIR PIECE

700
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS (SN: 15608)

701
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702
FILE ROOM-ARMSTRONG #4 RH BAND SAW SHARPENER
INCLUDES CLAMPS AND STANDS

702A
BAND SHARPENER
ARMSTRONG #4 RH BAND SHARPENER (SN; 15924) INCLUDES CLAMP AND STANDS ,Located at 4595 Jonathan Creek Road, Waynesville NC 28785

703
FILE ROOM DUST COLLECTOR
.

704
FILE ROOM DUST COLLECTOR
.

705
FILE ROOM DUST COLLECTOR
.

706
FILE ROOM ARMSTRONG BAND SAW FILING STATION
INCLUDES ARMSTRONG STRETCHER ROLL, 12" X 60" HAMMER BLOCK, ARMSTRONG #10 WELDING CLAMP, BENCH WITH ROLLERS

707
FILE ROOM PRECISION 4 KNIFE CHIPPER KNIFE TUB TYPE GRINDER
.

708
FILE ROOM CHIPPER KNIFE MANTAINANCE BENCH
WITH CONTENTS LESS ANY CHIPPER KNIVES

1049A
Log Trailer *
4 BUNK , WITH STRAPS

708A
TORCH CARD
TORCH CART

708B
BREAK STATION IN FILE ROOM (2) MICROWAVES, TOASTER, MINI FRIG

708C
CONTENTS OF CLOSET AS MARKED IN FILE ROOM

708D
WOOD BENCH AND CONTENTS IN FILE ROOM

708E
GRINDING TOOLS TO INCLUDE SWEDGE, SHAPERS AND DRESSERS IN FILE ROOM

708F
SIEMENS ROLLERS FOR GRINDER

708G
CABINET AND CONTENTS IN FILE ROOM

708H
(2) SAFETY HOOD

1061

709
FILE ROOM DUST BLOWER
12", 3 HP MTOOR, ALL PVC PIPE IN FILE ROOM

1064

710
FILE ROOM SALEM SAW GUIDE GRINDING MACHINE
(SN: 171360-96)

1065

711
FILE ROOM BABBIT MOLD
FOR CHIPPER KNIVES

1066

712
FILE ROOM BABBIT MOLD
FOR SAW GUIDES

1067

713
FILE ROOM BABBIT POT AND LADLE
.

1068

713A
SALEM GUIDE GRINDER
.

1069

714
FILE ROOM SHAFFER BOX FAN
54"X54", VENTILATION EQUIPMENT BOX FAN

1070

715
FILE ROOM HEATER
59" PERSONEL HEATER

1073

716
FILE ROOM NORTON 12" BAND SAW GRINDING ROCKS
.

1074

717
FILE ROOM AIR MASTER PEDESTAL FAN
30'

1075

718
ARMSTRONG LEVELER
(SN 2026B) OUTSIDE FILE ROOM

1076

719
BAND SAW BLADES OUTSIDE FILE ROOM
.

1077

720
BAND SAW BLADES OUTSIDE FILE ROOM
.

1078

721
BAND SAW BLADES OUTSIDE FILE ROOM
.

1079

722
BAND SAW BLADES OUTSIDE FILE ROOM
.

1080

723
BAND SAW BLADES OUTSIDE FILE ROOM
.

1081

724
BAND SAW BLADES OUTSIDE FILE ROOM
.

1082

725
BAND SAW BLADES OUTSIDE FILE ROOM
.

1083

726
BAND SAW BLADES OUTSIDE FILE ROOM
.

1084

727
BAND SAW BLADES OUTSIDE FILE ROOM
.

1085

728
BAND SAW BLADES OUTSIDE FILE ROOM
.

1086

729
BAND SAW BLADES OUTSIDE FILE ROOM
.

1087

730
BAND SAW BLADES OUTSIDE FILE ROOM
.

1088

731
BAND SAW BLADES OUTSIDE FILE ROOM
.

1089

732
10" (3) WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1116

733
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1119

734
10" (2)WIDE BAND SAW BLADES FOR 7' BAND MILL
.

1121

800
NEW 8'x20' LUMBER DIP TANK NEVER USED SHOP BUILT. DIP ASSEMBLY, NEW CYLINDER, NO HYDRAULIC POWER

1122

801
8'X20' LUMBER DIP TANK WITH LIFT ASSEMBLY- NO HYDRAULIC PACK; NO CYLINDER

1123

802
LUMBER DIP TANK
LUMBER DIP TANK INCLUDES 8’x20’ TANK AND LIFT ASSEMBLY. DOES NOT HAVE HYD CYLINDER OR HYD POWER. TANK IS LOCATED BESIDE STICKER STAKER LINE.

1124

803
IMPERIAL CYCLONE WITH DUST HOUSE INCLUDES DUST PIPE AS MARKED

1125

804
4X4' METAL STAND

1128

805
40" DIAMETER MISC. BLOW PIPE AS MARKED

1129

806
62' OF 24" DIAMETER DUST PIPE (4 SECTIONS)

1130

807
40' CORNELL BALACED VIBRATING CONVEYOR WITH 18" BOTTOM, 12" SIDES WITH DRIVE. APRROX. 7.5 HP MOTOR

1131

808
40' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM, 9" SIDES WITH DRIVE

1132

809
60' SECTION OF VIBRATING CONVEYOR WITH DRIVE 18" BOTTOM AND 9" SIDES WITH DRIVE

1133

810
50' CONVEYOR WITH 110 LADDER BACK CHAIN; NO DRIVE

1134

811
16'X3' FRAME

1135

812
18'X24" BELT CONVEYOR NO DRIVE

1136

813
DEBARKER HEAD

1137

814
21'X24" BELT CONVEYOR. NO BELT. DRIVE INCLUDED

1138

815
MEADOWS 9' X10" BELT CONVEYOR

1139

816
WEBSTER 21' VIBRATING CONVEYOR 24" BOTTOM, 10" SIDE, 15 HP MOTOR ON DRIVE ""NOTE: 10' SECTION WITH BUSTED PADDLES

1146

817
23'X24" BELT CONVEYOR NO DRIVE

1148

818
20' SECTION PAN BOTTOM FRAME 18" BOTTOM 9" SIDES, NO FIBERGLASS PADDLES

1149

819
PRENTICE GRAPPLE FOR KNUCKLEBOOM LOADER

1150

820
QUICK COUPLE FORKS FOR LAODER
QUICK COUPLE FORKS FOR LOADER

1151

821
45'X24" BELT CONVEYOR FRAME. NO DRIVE

1152

822
COOK 36E2 2 SAW BOARD EDGER, NO INFEED/NO OUTFEED/ NO MOTOR

1156

823
8'X11' 5 STRAND HAUL UP DECK NO DRIVE

1157

824
40'X29" BELT CONVEYOR NO BELT/ NO DRIVE

1158

825
SALEM 10 SAW 16' TRIMMER WITH 0 AND MINUS 1 SAW. WILL PASS A 23' BOARD (SN: 135980) 10 HP MOTORS ON SAWS

1159

826
16' HEMCO TRIMMER 10 SAW WITH 0 AND MINUS 1 SAW.

1160

827
PALLET OF 81X HAULER UP CHAIN

1161

2001

828
12'X60' HANDS OFF SELF POSITIONING INFEED TABLE; CHROME ROLLS, 3 CHAINE ARM POSITIONING, 3 SETS OF 3 AIR STOP PINS WITH DRIVE

1162

829
SALEM TAILING DEVICE

1163

1000
CATERPILLAR 950 WHEEL LOADER (SN: CAT950KCR4A0214)
FRIDAY AUCTION STARTS HERE
2015 MODEL, 23.5R25 TIRES-50%, 9249 HOURS, QUICK COUPLE
THIS IS A VERY NICE MACHINE! 

1164

1001
6' BALE TYPE LOG FORKS
.

1002
BUCKET WITH QUICK COUPLE
.

1003
CAT 924K ARTICULATING RUBBER TIRE LOADER
2015 MODEL
(SN: C8N32278), 7011 HOURS, QUICK COUPLE. RUNS GREAT
VERY NICE CLEAN MACHINE.

1003A
VOLVO L150C WHEEL LOADER*
PIN# L150CV60784, 10,200 HOURS
RUNS GREAT, COMPLETELY REFURBISHED BY VOLVO IN 2018! QUICK COUPLER.

1003b
VME America’s bucket quick couple. Model 94743
.

1004
KOMATSU WA250PT-5) TOOL CARRIER
(SN70289) ARTICULATING LOADER WITH QUICK COUPLE ATTACHMENT, KOMATSU DIESEL ENGINE, JRB QUICK COUPLE LUMBER FORKS WITH BALE CLAMP.  BROKEN FORARM,
BAD HYD. LEAK BETWEEN TANK AND HY. PUMP DOES RUN AND OPERATE.

1004A
Cat 930 Wheel Loader* WITH BUCKET
sn: 41K12618) HOUR METER MISSING
RUNS GREAT

1005
SET OF BALE FORKS
QUICK COUPLE BALE FORK (SN 80835)

1005A
QUICK COUPLE BALE FORKS

1005B
QUICK COUPLE 7' FORKS WITH CLAMP

1014A
Linde H160 Forklift *
LOCATED AT  68 SNOWBIRD ROAD, ROBBINSVILLE, NC 28771

1005C
LOG PUSHER ATTACHMENT
FOR LOADING CONTAINERS.
LOCATED AT: 4595 JONATHAN CREEK ROAD WAYNESVILLE NC 28785

1005D
LOG PUSHING ATTACHMENT
LOG PUSHING ATTACHMENT FOR LOADING CONTAINERS

1005E
Container push pole
For use with single fork push bar for loading containers

1007
VOLVO QUICK COUPLE FORKS
-80153

1008
Wheel Loader*
L120C Volvo BM, hrs unknown, engine does not work loss compression, Transmission was still good when it was running, sold off site at 249 banco sawmill rd Burnsville, NC 28714, rough condition

1009
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Carrier  Serial # 11901. New factory engine installed with 0 hours!
NOTE: this machine is still located at: 4595 Jonathan Creek RD Waynesville NC because the engine did not get fully installed. Please see one of the auction staff if you have interest in this machine.

1010
BRUTE HUSKY LX175 KNUCKLEBOOM LOADER
ON SELF PROPELLER CARRIER, LEVER CONTROLS (SN: 859299), JOHN DEERE DIESEL MOTOR, HYDRAULIC PACK FOR BUCK SAW, CONTINUOUS ROTATING GRAPPLE

1011
Barko 160B Knuckleboom Loader
1995 , self propelled, lever controls, 6 BT Cummins engine, Rototec grapple, runs and operates good.

1012
John Deere 843H Cutter
FD22 Head, meter reads 10,382 hrs. new teeth, tires @ 50% runs & operates good

1013
300 CATERPILLAR MODEL DP135 (SN: 5DP00127)
30,000 LB FORKLIFT 16,934 HOURS, SIDE SHIFT, 7'3"X8" FORKS, CAT DIESEL ENGINE, 12:00 TIRES, DUAL TIRES ON FRONT, RIGHT SIDE TIRES 50%, LEFT SIDE 20%) 
RUNS GREAT

1022
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT
NISSAN 100 MODEL FO455V 10,000 LB FORKLIFT (SN: AN29B80042), 6' FORKS, SIDE SHIFT, TRIPLE MAST, PROPANE, PNEUMATIC TIRES, 7250 HRS

1014
HYSTER 300XL FORKLIFT 30,000 LB
(SN D19D23304), 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL TIRES, PERKINS DIESEL, ENCLOSED CAB, 12.00-20 DUAL TIRES (80/FRONT: 10/BACK) Meter reads 1717 hours, but has probably rolled over.
 RUNS

1014B
TAYLOR TE-300M FORKLIFT LOADER LEVEL CAPABLITIES*
SERIAL #S-H6-24666, 25,000LB LIFT CAPACITY, 8068 HOURS;LOADER LEVEL CAPABILITIES, BRAND NEW BATTERY , RUNS GREAT

1015
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT
2008 KALMAR MODEL DEC 180-6 18,000 LB CAPACITY FORKLIFT. (SN: T43105.0269), TRIPLE SEE THRU MAST, 8' SELF POSITIONING FORKS, DUAL TIRES, CUMMINS DIESEL ENGINE, SHOWS 4942 HRS. *DOES NOT RUN. HAS ELECTRONIC ISSUES, MOTHER BOARD IS MISSING. WILL BE SOLD FROM ITL CURRENT LOCATION, AND CAN BE INSPECTED AND PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1016
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK

1017
USNR MODEL F305 30,000 LB FORKLIFT
USNR MODEL F305 30,000 LB FORKLIFT (SN: CE3050170010409) 8' SELF POSITIONING FORKS, SEE THRU MAST, SHOWS 5356 HRS. CUMMINS DIESEL ENGINE, DUAL TIRES.  HAS ENGINE ISSUES, DOES NOT RUN.  CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020
TAYLOR 250 E-250M BIG RED FORKLIFT
TAYLOR 250 E-250M BIG RED FORKLIFT, (SN: S-H5-1906) 8' FORKS, SIDE SHIFT, DUAL TIRES, DETROIT ENGINE.TRANSMISSION ISSUES. DOES NOT RUN. CAN BE PICKED UP FROM 1243 MEETING STREET ROAD, EDGEFIELD, SC 29824

1020A
TAYLOR Y-22WO FORKLIFT
TAYLOR Y-22WO FORKLIFT (SN: 3-68-4413) 22,000 LB CAPACITY; 6' FORK, DETROIT ENGINE, DOES NOT RUN; DOES HAVEDUAL TIRES; SIDE SHIFT; LOCATED AT J CREEK SITE

1020B
TAYLOR 300 FORKLIFT
TAYLOR 300 FORKLIFT;8' FORKS; SEE THROUGH MAST, DOES NOT RUN; BURNT; LOCATED IN J. CREEK

1021
NISSAN 11000 FORKLIFT
(DF05N50V) DUAL TIRES, 11,000 CAPACITY. (SN: DF05000430), 8' FORKS, SIDE SHIFT, 8.25.15 PNEUMATIC TIRES, AHOQINF ``6744 HOURS, DIESEL ENGINE, ENCLOSED CAB, SEE THROUGH TRIPLE MAST, RUNS GOOD , WAS USED TO SETUP THE AUCTION-NEEDS NEW BATTERIES 

1024
CATERPILLAR DPL40 9000 FORKLIFT
 9,000 LB FORKLIFT, DIESEL ENGINE, 4' FORKS, SIDE SHIFT, SEE THROUGH MAST, DUAL PNEUMATIC TIRES, (SN: 3CN90542) 2434 HOURS
RUNS, NEEDS SEAL BETWEEN TRANSMISSION AND TORQUE CONVERTER REPLACED LEAKS HYD. OIL 

1025
NISSAN 90 FORKLIFT
MODEL WGF03A40V; CHASSIS: WGF03-920713, 9,000 LB FORKLIFT, TRIPLE MAST, SIDE SHIFT FORKS, 4' FORKS. DIESEL ENGINE, DUAL HARD TIRES ALL THE WAY AROUND, 6382 HOURS
EITHER HEAD GASKET OR INJECTOR PUMP PROBLEM.  WILL CRANK AND RUN

1026
TAYLOR "LITTLE RED" THD100 FORKLIFT: SN: P31023
10,000 LB CAPACITY, 4' FORKS, SIDE SHIFT, SEE THRU MAST, PERKINS DIESEL ENGINE, SHOWING 1057 HRS, BIG TIRES ON FRONT (13.00-24) BACK (9.00-20).  RUNS GOOD.

1027
HYSTER 120FT FORTIS FORKLIFT
2017 MODEL, HYSTER 120FL FORTIS FORKLIFT, TURBO DIESEL (SN: U0005V04367P) TRIPLE MAST, SIDE SHIFT, 8'FORKS, DUAL TIRES, SHOWS 2516 HRS. ONE OWNER! VERY NICE MACHINE!!

1028
HYSTER H50XM FORKLIFT
HYSTER H50XM FORKLIFT (SN: 177B48997B) TRIPLE MAST, SIDE SHIFT, 4' FORKS, PROPANE, PNEUMATIC TIRES, DOESN'T RUN

1028A
Komatsu FG4OZ Forklift*
KOMATSU FG4OZ FORKLIFT, (SN: 1107238) 8,000 LB CAPACITY, SIDE SHIFT, PROPANE, 4' FORKS, 7360 HOURS  WAS RUNNING, QUIT; AND HAS NOT RUN SINCE

1029
JCB Track Skidsteer
2004, model 4400KG Serial # 118777L Pilot controls, 2225 hrs. brand new tracks. runs and operates good, nice machine.

1029A
BOBCAT 753 SKID STEER*
6933 HOURS, RUNS 

1029B
Bobcat 743B skid steer
Bobcat 743B skid steer s/n 509324270 With bucket showing 2137 hours. 1 FLAT TIRE , NO KEY

1030
750 John Deere Dozer
meter reads 5532 hrs. runs and operates like it should. 12' blade

1031
2008 FREIGHTLINER CL120 TRACTOR WITH COLUMBIA SLEEPER
 (1FUJA6CV78L41179 ) EDEN FULLER 10 SPEED TRANSMISSION. 700,335 MILES, DETROIT DIESEL MERCEDES (OM460LACID781). RUNS AND DRIVES. NEEDS WIRING HARNESS, 1 SET OF WHEELS MISSING

1031A
2007 VOLVO TRACTOR*
2007  VOLVO TRACTOR 856,833 MILES , RUNS  (SN: 414NC9GH07N457017)

1032
2000 STERLING DAY CAB TRUCK
(SN: 2FZHCYB1AF41762) FULLER TRANSMISSION, DISREPAIR, CUMMINS DIESEL. DOES NOT RUN. PARTS TRUCK

1033
2005 VOLVO TRUCK
2005 VOLVO TRUCK, (VIN: 4V4NC9GG35N386620), 10 SPEED

1033A
Ford Sterling Truck*
2006, 102,000 miles, C7 Cat engine, Michelin tires @ 90% this truck is in excellent condition.

1034
2012 FREIGHTLINER CASCADIA TRUCK
2012 FREIGHTLINER CASCADIA TRUCK, (VIN: 1FUJGLDR6CBL5976), 10 SPEED TRANSMISSION, DOUBLE BUNK SLEEPER, DETROIT DD15 DIESEL, HAS ELECTRONIC PROBLEM

1035
LTL 9000 Ford Truck
With 60 series Detroit deisel, good running unit

1035A
1988 INTERNATIONAL DUMP TRUCK
1988 INTERNATIONAL S1600 DUMP TRUCK, SINGLE AXLE, STEEL DUMP BED; INTERNATIONAL DIESEL ENGINE. (SN: 1HTLAZRM5JH558937) ; MANUEL TRANSMISSION; SHOWING 49,430 MILES,ONSITE AND RUNS GOOD, DEAD BATTERY

1036
2000 FORD F650 SUPER DUTY TRUCK
(3FDWF65H3YMA03246), CAT DIESEL ENGINE, (1650) MAXON TOMMY LIFT,   75R.22.5 TIRES.  RUNS GREAT.

1037
FORD F350 SUPER DUTY SERVICE TRUCK
STAND TRANSMISSION, GRANNY LOW, 7.3 POWER STROKE DIESEL ENGINE, 4 DOOR, 189,999 MILES.  EITHER OIL PUMP OR INJECTOR PUMP. WILL START AND RUN. CREW COULD NOT GET IT STARTED , DEAD BATTERY

1037AA
FORD 350 TRUCK (VIN: 1FDKF38F9TEB42285)
POWER STROKE DIESEL SERVICE TRUCK. RUNS, CREW COULD NOT GET IT STARTED, DEAD BATTERY

1037B
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) EXTENDED CAB WORK TRUCK
2011 SILVERADO 1500 (VIN: 1GCRKSE32BZ389433) 146,000 EXTENDED CAB WORK TRUCK, RUNS AND DRIVES WELL

1038
2013 FORD XL 150 4X4 PICK UP
2013 FORD XL 150 4X4 PICKUP, AUTO TRANSMISSION, GAS ENGINE NEEDS TUNE UP, TRANSMISSION WORKS BUT IS WEAK. RIGHT NOW THE SPARK PLUGS ARE OUT AND WILL NOT START. BUT TRUCK DOES RUN. HAS OVER 300,000 miles

1039
2003 PEERLESS 45' WALKING FLOOR TRAILER VIN: 1PLE045283PG53021)
WITH KEITH WALKING FLOOR 11R24.5 TIRES (5-70%, 3-10%-20%) ALUMINUM RIMS

1040
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1292A45266T199047)
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # V12, TIRES: (2-70%, 6-20%)

1041
2006 INNOVATIVE 45' OPEN TOP CHIP VAN (VIN: 1Z92A452136T19118))
MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES (FRONT 4-70%, REAR: 20%) , V14

1042
2006 (ITT) INNOVATIVE 45' OPEN TOP CHIP VAN (SN: 1Z92A45246T199046)
(VIN:1Z92A45246T199046) ) MESS SWING OUT DOOR, ALUMINUM FLOOR, MODEL 505-45, 11R24.5 TIRES STOCK # U12, TIRES: FRONT AXLE 4: 50%, REAR: 2-10%, 2-50%)

1042A
2015 PITTS OPEN TOP TRAILER*
MODEL CV-45, 66300 GVWR , 20,000LB GROSS AXLE WEIGHT, SER 5JYCV4523GE161697

1042B
BUDD OPEN TOP TRAILER*
CC3404YZ0687

1042C
BUDD 1978 OPEN TOP TRAILER*
SL2S450B50 , SN163211M, GVWR 70,000

1043
1973 FRUEHAUF CLOSE TOP DUST TRAILER
(HPR472095) FIXED TANDEM, 295/75R 22.5 TIRES

1044
FRUEHAUF 40' OPEN TOP VAN TRAILER
.

1055
MARYVILLE AERIAL WORK PLATFORM
MODEL 2033, 20' HEIGHT, 800 LB CAPACITY, 24 VOLT; (SN; 08601416)  

1044A
1991 RAVEN ALUMINUM FLATBED TRAILER
1991 RAVEN ALUMINUM FLATBED TRAILER; (1R1F04825MJ913116) WITH BOLTED ON LOG BUNKS

1045
1997 TRANSCRAFT ALUMINUM FLAT BED TRAILER
MODEL: EAGLE W2 48X96, VIN: ITTF4820000622

1046
1990 RAVENS 48' X96" ALUMINUM FLAT BED TRAILER
SPEAD AXLE, (1R1F04826LE900219) 11R22.5 TIRES

1046A
1995 UTILITY FLATBED TRAILER* (SN:104F52480SA605005)
78,000 GVWR

1046B
1994 Trailmobile Trailer
48' x 96", model# F71T-5EAA, STEEL, WOOD FLOOR

1047
FMCSA Tandem Trailer
1999, aluminum floor, 42' road ready.

1047A
Benco Tandem Axle Trailer*
45', good floor and road ready

1047B
1994 TRANSCRAFT FLATBED TRAILER*
MODEL TL2000 W2 , 48'X96" , 80,000GVWR ,WITH REMOVABLE LOG BUNKS  (SN; 1TTF48202R1040988) 

1047BB
1995 Flat Bed Trailer*
96" x 45' Steel Aluminum Combo Transcraft Trailer. One side landing gear doesn't work and one axle hanger is cracked. Good Tires, brakes and lights. been using it until June 12th.

1047C
2000 LUFKIN FLATBED TRAILER* (SN: 1L01B482341146461)
WOODEN FLOORS

1047D
TRANSCRAFT EAGLE FLAT BED TRAILER
TRANSCRAFT EAGLE FLAT BED TRAILER; SUPER BEAM, SPREAD AXLE; 48"X96";(VIN: ITT-F4520-021044588) ALUMINUM BED

1048
Log Trailer
42' dual bunk, new pins & bushings & springs. Road ready.

1049
PITTS LOG TRAILER (MFG: 6-99) MODEL LT-40-B DOUBLE BUNK
(1PELT40XXP990712) 11R22 TIRES

1049A
1989 NABORS DOUBLE BUNK LOG TRAILER
1989 NABORS DOUBLE BUNK LOG TRAILER (VIN: 1L01B4823Y1146461)

1050
Pup Trailer
Road ready.

1051
Log Bed
Brand new

1052
Log Bed
In close to new condition.

1053
Log bed
w-straps.

1054
Log bunk
.

1056
Quick attach lumber forks
4’ lumber forks

1057
Log bunk steel
Steel pieces pre cut to make log bunks for flat bed trailers