Fox River Hardwoods
Listing ID#: 328102

Sale Location

Bloomfield, IA 52537
Sale Dates and TimesSALE IS COMPLETED
Thursday Jul 30, 2020 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell absolute unless otherwise advertised. 10% buyer’s premium applies to all onsite purchases and 13% to all offsite purchases.
Listing Information

 

Date: July 30, 2020 Onsite Auction Starts at 10:00 AM with the online items starting at 11:00 AM 
Directions: From downtown Bloomfield at the intersection of 63 & W. Jefferson St., head west. Turn north on N. West St. In .5 miles turn west onto Goode St. In 2.6 miles the destination is on your right.


00
Information Lot*
Onsite Auction starts at 10:00 AM with the online portion to follow at approx. 11:00 AM

100
Log Deck
11'x36', 4 strand w/stop-n-load, hydraulic motor gear drive H18 chain. First lot of an entirety.

101
Renco Log Turner
Hydraulic drive

102
Cleereman Carriage
Model #40, s/n 40-204, 40", 3HB, air over air set works, in very good condition, w/3 Brownsville turners, includes 55' track, frame, operators cab, and controls

103
Cleereman Husk
w/top saw arbor, includes the 2 blades on the husk

104
Line Shaft w/Hydraulic Pump
Kawasaki Precision machinery pump, on 2"x30" shaft w/3 groove drive pulley, model #K3VL140/B

105
Tyrone Berry Feed
Model SMA-215, s/n A0004, 1500 psi, 1800 rpm, includes carriage drive

106
Entirety Lots 100-105
With 10% raise

107
Detroit 60 Series Diesel
12.7 liter, 450 hp, w/9speed transmission, meter reads 11,500 hrs., very good engine.

107a
Heat Exchanger
Was hooked to the Detroit Diesel lot #107

107b
Exhaust Heating Tube
Was hooked to Detroit Diesel, approximately 50'

108
Quincy Air Compressor
Model 5220, s/n 397972, size 6x3.25x4, close to new condition

109
Line Shaft
2"x9' w/3-4 groove, 1-3 groove, 1-2 swivel pulleys

110
Line Shaft w/2 hydraulic pumps
2"x30" shaft w/1-3 groove pulley and 2 hydraulic pumps

111
500 gal Hydraulic Reservoir
Mounted on stand

112
Fuel Tank
Approximately 300 gal

113
Fuel Tank
Approximately 300 gal

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

115
Roll Case
42' w24"x7" rolls, live with hydraulic drive, includes 2 air stops. Nice rollcase.

116
56" Saw Blade
Insert teeth "P", was still used in production

117
56" Saw Blade
Blade is not usable

118
56" Saw Blade
Insert teeth "P", was still used in production

119
56" Saw Blade
Insert teeth "P", was still used in production

120
56" Saw Blade
No teeth

120A
Topsaw blade
40" , P teeth*

121
Minor Edger
6"x36", includes in-feed and tailing belt, 2 moveable blades, #4553, includes pop up transfer in-feed, hydraulic control valves as marked.

122
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

123
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

124
Skate Roller
10' w/9" rolls mounted on 34" legs

125
Baker Resaw
Model BBR-O, single head resaw with return, hydraulic drive, 10" capacity, includes hydraulic control valve bank as marked.

126
Go Fast Deduster
Hydraulic drive,includes hydraulic valve and speed control, great condition!

126A
2'x4' table
Offbearing table from resaw*

126B
Corner stacking plate
Made with plywood*

127
Manual Chop saw
22" blade, hydraulic motor, live in-feed/out-feed, 12"x4 rolls, includes valve controls as marked

128
Cant Unscrambler
8', hydraulic gear motor drive, 48" high, good condition

129
Mellot Cant Deck
3 strand, 8'x12', hydraulic motor with Tulsa gear drive

130
Crosby Edger
Currently setup w 4 stationary blades, 5"x32", line shaft ready. First lot of an entirety.

131
Belt Conveyor
32"x12' with 33" legs, hydraulic drive, out feed for edger

132
Belt Conveyor
12"x9', with hydraulic drive, was used as waste conveyor under edger

135A
Woodland K4 Upright Bandsaw*
4-HB, 1 1/2" Band, Fully Hyd, W/Board Edger built on Unit, 4" x 24" Cap. Good working Condition.

133
Deutz Diesel
6 cylinder, 2300 rpm, with NACD power take off clutch, size 11SS

134
Line Shaft
2"x11'6" with 1-3 groove pulley on each end, was being used to run the edger

135
Entirety Lots 130-134
With 10% raise

136
Skate Roller
14"x12' with 36" legs

137
Air Hoist
1 ton, CP1100, with approximately 24' of track

138
Belt Conveyor
24"x32' with hydraulic drive, on steel legs

139
Fast Line Saw System
Gator Products, model FLSE, s/n 0227-03, good condition

140
Skate Roller
9"x10' by 36" high

141
Skate Roller
9"x10' by 36" high

142
Transfer Deck
10'x6'x32", steel plate, in-feed roll, C55B chain, hydraulic drive

143
Green Chain
3 strand, 30x8, hydraulic drive

144
DeWalt Air Chop saw
with in-feed/out-feed rolls

145
Vertical Gang Saw with Sizer
Shop built, 5.5" blade capacity, currently set up for 3.5", was being run with hydraulic but pump is missing.

145a
Dust Blower
20" , line shaft ready 

145B
Offbearing table and corner stacking plate
Both wooden*

146
Precision 48" Chipper
Size 48-11, s/n C-2499, 900 rpm, top discharge, good condition. First lot of an entirety.

149A
58" Precision Chipper*
6 knives, 3 are blocked, Good working Condition.

147
Chip Cyclone
Includes elbow from chipper

148
Precision Chip Screen
7'x7', s/n S-1147, good condition

149
Entirety Lots 146-148
With 10% raise

150
Precision Vibrating Conveyor
112', new in 2015, with hydraulic drive, in very good condition, comes with magna wedge, chipper mouth, screen fines section and 5' fiberglass section

151
Detroit 60 Series Diesel
12.7 liter, 400 hp, with 9 speed transmission, meter reads 5978 hours, came out of a semi, good unit

152
Line shaft/Hydraulic Pump Station
Clutch direct hookup to 20", 10 groove pulley then to 3"x12' line shaft with KPM Pump, type K3VL140/B and smaller pump on one end and 2 hydraulic pumps on other end and 1-M4V3525VQ30A215 & 1-MHV18VGTC-60A2, plus 6 groove pulley includes belts as marked

153
500 gal Hydraulic Reservoir
Mounted on stand

154
Phelps 40" Chip Blower
Model 40 HV-1, s/n 84936, 1850 rpm. Includes 2"x66" line shaft and square chip blower pipe/elbow.

155
24" Dust Blower
Line shaft ready

156
Line Shaft
2"x84" with 1-3 groove and 1-2 pulley

157
Newman Chipper Knife Grinder
G-200, hydraulic drive, s/n 2003-31

160A
Fuel Tank*
100 gal, good condition

157A
Chipper knives
Some new and used*

158
Air Tank/Hose Reel
In the chipper room

160B
Fuel Tank*
100 gal, good condition

159
Dust Pipe/Cyclone Outside
All dust pipe and support stands including cyclone outside

160
Fuel Tank
Approximately 300 gal

161A
Cummins Power Unit*
5.9 liter, 160hp, 6 cyclinder, in excellent condition.

161
Cummins Power Unit
5.9 liter, 160 hp, 400 ft/lb torque, with NACD clutch size 11-50, unknown hours. Came out of a truck, has additional hydraulic cooler,good unit.

161B
371 Detroit Diesel*
Good working condition

162
Hydraulic Pump Station
Line shaft station with 3 hydraulic pumps, 1-Kpm model K3VL1121A, 2 gear pump

163
Hydraulic Reservoir Tank
Approximately 300 gal with valves and filters

164
Fuel Tank
Approximately 300 gal

165
Cornell dust Blower
26" hydraulic drive, includes hydraulic valves as marked.

166
Dust Pipe
8" with elbow, approximately 60", outside

167
Phelps Dust Blower
45" with hydraulic drive, in good condition

168
Dust Pipe
Includes 2 way diverter and approximately 140' of 12" with 2 support stands and cyclone at saw dust pile

169
Dust Conveyor
Elevator type conveyor, 24' long with hydraulic drive

169A
Air Tank*
500 gal, good condition

169B
Air Tank*
500 gal, good condition

169C
Air Tank*
500 gal, good condition

170
Reserve Air Tank
Approximately 250 gal

171
Bench Grinder
Hydraulic drive, includes hyd. valve

172
Drill Press
Hydraulic drive, includes hyd. valve

173
Hydraulic Piping in Building
All hydraulic pipes inside the building, does not include the control valves at said machines.

174
10" Dust Pipe
Like new, 38' with 2-90° elbows

175
8" Dust Pipe
All 8" inside building, approximately 200", approximately 6 elbows

176
5" Dust Pipe
All 5" inside building, approximately 100', includes 3 elbows

177
Air Pipe
All air pipe in building

178
LP Heater
Infrared with thermostat controls

179
Hydraulic Cooling Fan
Fan only

179A
Fisher blade hammering anvil
Complete with stand*

179B
Fisher blade hammering anvil
Complete with stand*

180
Detroit 60 Series Diesel
12.7 liter, 400 hp, new head gasket, good running unit, no clutch

180A
Hyd. Cooling radiator
Used*

180B
Fan with Honda engine
Gx390 engine, 48" fan*

180C
Fan
48"*

181
Compressor Tank
Tank and electric motor only, 25hp electric motor

181A
Brown & Sharpe Metal Lathe
No 6 , was bought as a working unit but seller never used it*

181B
48" line shaft on stand
With 3 pulleys*

181C
Quincy air compressor
Model 4088, needs rebuilt*

181D
Propane motor out of Hyster Forklift
Was in working condition when removed ,includes radiator, transmission and controls*

181E
Clutch
In box*

181F
Radiator
Used*

181G
Radiator
Used*

181H
Radiator
Used*

181I
Radiator
Used*

181J
Radiator
Used*

181K
Pallet racking
4-12' legs and 22-12' cross arms*

181L
Lumber cart
4'x8' on steel wheels*

182
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel, with steel log bunks

183
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel

183A
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel*

184
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

185
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

186
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

187
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

188
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

189
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

190
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

191
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

192
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

193
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

194
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

195
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

196
Sticker Carts
40"x40" with steel wheels

197
Sticker Carts
40"x40" with steel wheels

198
Sticker Carts
40"x40" with steel wheels

199
Sticker Carts
36"x36" with steel wheels

200
Classic Central Boiler
Outdoor wood furnace, model CL7260, s/n 105568, Brand new in 2015, but never used.

201
Tie Stacker
Hydraulic drive, runs good.

202
Baker Incline Belt Conveyor
Hydraulic drive, uninstalled ready to load, good condition

203
Belt Conveyor
10"x26', no drive

204
Concave Belt Conveyor
18"x42', with electric gear motor drive, ready to load

205
Mellott Debarker
s/n 8120056-4, includes cab, needs work

206
Patz Barn Sweep
Needs chain

207
Transfer Deck
Incline w/lug chain 5XL10W

208
Detroit Diesel w/Clutch
NACD power take off clutch

209
Fuel Tank
300 gal fuel tank on 10' stand

210
Mellot stop and load*
48" good condition

211
Shop Built Wood Grinder*
48" Grinder head, 12"x 8' off feed belt Conveyor, Hydraulic, 52" x 10' box w/ plunger, good working condition

212
Malone band sharpener*
Hydraulic, extra Grinding wheels, good condition

213
Baldor band tooth setter*
Double tooth setter, air / Hydraulic, hyd drive, good condition

213A
32" x 15' 2 strand shop built green chain*
no drive, fair condition

214
Log deck*
32" x '18, 2 strand, hydraulic drive, good condition

215
pile of scrap steel*
variety of tubes and I beams

216
Palletmaster vertical bandsaw*
36" wheels, 4" off feed belt, hydraulic/ electric motor, electric controls, serial number 79,

217
Hydraulic Power Unit*
Electric motor, fair condition

218
Minor Edger*
30" x 6" , 3 blade, 2 movable,no drive, line shaft ready, good condition, serial number FB 8499

219
26" up cut chop saw*
7hp electric motor, infeed, out feed, fair condition

220
Morgan Deduster*
6" feed through belt, no drive, serial number 112095054, good working condition

221
Woodland 4K vertical bandsaw*
26" HB , fully hyd, W/ board edger built on the unit, 2 movable blades, 4" x 24" cap. Good Working Condition

222
100 gal Hydraulic Tank*
w/ radiator, good condition

223
371 Detroit Diesel*
model 50347001, serial number 3db00249, hrs unknown, used on the woodland mill, good working condition

224
Cummins Power Unit*
6.9 liter,160 hp, was pullled from truck, approx 70,000 miles on it, 6 cyclinder, model b5-9-160, engine # 56105705, Excellent working Condition!

225
pile of scrap steel*
.

226
steel pipe*
2 straight, 10" x 14', 12" x 19' 1 elbow, 12" x 13'

227
Precision Chipper*
48" dia., 6 knives, 3 blocked, w/ elbow pipe, very good condition

228
Fuel Tank*
250 gal with hose, on a stand, good condition

229
Fuel Tank*
250 gal, on stand, good condition

300
Tiger Cat 235B Knuckleboom
6600 hours since complete engine rebuild, approximately 14,000 total hours, grapple new 2 yrs ago. First lot of an entirety.

300a
Grapple Saw Dust Bucket
For Knuckleboom 48" wide

300b
Forks for Knuckleboom
Rough condition

301
Flatbed Train Car
With hydraulic drive

302
Train Track
825' installed plus 60' not installed

303
Entirety Lot 300-302
With 10% raise

304
325 Prentice Knuckleboom
Cummins 5.9 engine, with carrier, engine runs great, needs minor hydraulic repairs, seller plans to have fixed by auction day.

305
Custom Forklift
All wheel drive (in low gear) Custom built stand on forklift, Hyster mast, side shaft, fork positioners, Honda GX690 engine, 8000 lb lift capacity. Runs good.

306
Custom Forklift
Custom built stand on forklift, Clark mast, Honda GX390 engine, 4000 lb lift capacity

Gallery

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Fox River Hardwoods

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
19250 Jaguar Trail
Bloomfield, IA 52537
Sale Dates and Times
Thursday Jul 30, 2020 Completed
Sale Terms and Conditions
Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell absolute unless otherwise advertised. 10% buyer’s premium applies to all onsite purchases and 13% to all offsite purchases.
Listing Details

 

Date: July 30, 2020 Onsite Auction Starts at 10:00 AM with the online items starting at 11:00 AM 
Directions: From downtown Bloomfield at the intersection of 63 & W. Jefferson St., head west. Turn north on N. West St. In .5 miles turn west onto Goode St. In 2.6 miles the destination is on your right.


00
Information Lot*
Onsite Auction starts at 10:00 AM with the online portion to follow at approx. 11:00 AM

100
Log Deck
11'x36', 4 strand w/stop-n-load, hydraulic motor gear drive H18 chain. First lot of an entirety.

101
Renco Log Turner
Hydraulic drive

102
Cleereman Carriage
Model #40, s/n 40-204, 40", 3HB, air over air set works, in very good condition, w/3 Brownsville turners, includes 55' track, frame, operators cab, and controls

103
Cleereman Husk
w/top saw arbor, includes the 2 blades on the husk

104
Line Shaft w/Hydraulic Pump
Kawasaki Precision machinery pump, on 2"x30" shaft w/3 groove drive pulley, model #K3VL140/B

105
Tyrone Berry Feed
Model SMA-215, s/n A0004, 1500 psi, 1800 rpm, includes carriage drive

106
Entirety Lots 100-105
With 10% raise

107
Detroit 60 Series Diesel
12.7 liter, 450 hp, w/9speed transmission, meter reads 11,500 hrs., very good engine.

107a
Heat Exchanger
Was hooked to the Detroit Diesel lot #107

107b
Exhaust Heating Tube
Was hooked to Detroit Diesel, approximately 50'

108
Quincy Air Compressor
Model 5220, s/n 397972, size 6x3.25x4, close to new condition

109
Line Shaft
2"x9' w/3-4 groove, 1-3 groove, 1-2 swivel pulleys

110
Line Shaft w/2 hydraulic pumps
2"x30" shaft w/1-3 groove pulley and 2 hydraulic pumps

111
500 gal Hydraulic Reservoir
Mounted on stand

112
Fuel Tank
Approximately 300 gal

113
Fuel Tank
Approximately 300 gal

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

115
Roll Case
42' w24"x7" rolls, live with hydraulic drive, includes 2 air stops. Nice rollcase.

116
56" Saw Blade
Insert teeth "P", was still used in production

117
56" Saw Blade
Blade is not usable

118
56" Saw Blade
Insert teeth "P", was still used in production

119
56" Saw Blade
Insert teeth "P", was still used in production

120
56" Saw Blade
No teeth

120A
Topsaw blade
40" , P teeth*

121
Minor Edger
6"x36", includes in-feed and tailing belt, 2 moveable blades, #4553, includes pop up transfer in-feed, hydraulic control valves as marked.

122
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

123
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

124
Skate Roller
10' w/9" rolls mounted on 34" legs

125
Baker Resaw
Model BBR-O, single head resaw with return, hydraulic drive, 10" capacity, includes hydraulic control valve bank as marked.

126
Go Fast Deduster
Hydraulic drive,includes hydraulic valve and speed control, great condition!

126A
2'x4' table
Offbearing table from resaw*

126B
Corner stacking plate
Made with plywood*

127
Manual Chop saw
22" blade, hydraulic motor, live in-feed/out-feed, 12"x4 rolls, includes valve controls as marked

128
Cant Unscrambler
8', hydraulic gear motor drive, 48" high, good condition

129
Mellot Cant Deck
3 strand, 8'x12', hydraulic motor with Tulsa gear drive

130
Crosby Edger
Currently setup w 4 stationary blades, 5"x32", line shaft ready. First lot of an entirety.

131
Belt Conveyor
32"x12' with 33" legs, hydraulic drive, out feed for edger

132
Belt Conveyor
12"x9', with hydraulic drive, was used as waste conveyor under edger

135A
Woodland K4 Upright Bandsaw*
4-HB, 1 1/2" Band, Fully Hyd, W/Board Edger built on Unit, 4" x 24" Cap. Good working Condition.

133
Deutz Diesel
6 cylinder, 2300 rpm, with NACD power take off clutch, size 11SS

134
Line Shaft
2"x11'6" with 1-3 groove pulley on each end, was being used to run the edger

135
Entirety Lots 130-134
With 10% raise

136
Skate Roller
14"x12' with 36" legs

137
Air Hoist
1 ton, CP1100, with approximately 24' of track

138
Belt Conveyor
24"x32' with hydraulic drive, on steel legs

139
Fast Line Saw System
Gator Products, model FLSE, s/n 0227-03, good condition

140
Skate Roller
9"x10' by 36" high

141
Skate Roller
9"x10' by 36" high

142
Transfer Deck
10'x6'x32", steel plate, in-feed roll, C55B chain, hydraulic drive

143
Green Chain
3 strand, 30x8, hydraulic drive

144
DeWalt Air Chop saw
with in-feed/out-feed rolls

145
Vertical Gang Saw with Sizer
Shop built, 5.5" blade capacity, currently set up for 3.5", was being run with hydraulic but pump is missing.

145a
Dust Blower
20" , line shaft ready 

145B
Offbearing table and corner stacking plate
Both wooden*

146
Precision 48" Chipper
Size 48-11, s/n C-2499, 900 rpm, top discharge, good condition. First lot of an entirety.

149A
58" Precision Chipper*
6 knives, 3 are blocked, Good working Condition.

147
Chip Cyclone
Includes elbow from chipper

148
Precision Chip Screen
7'x7', s/n S-1147, good condition

149
Entirety Lots 146-148
With 10% raise

150
Precision Vibrating Conveyor
112', new in 2015, with hydraulic drive, in very good condition, comes with magna wedge, chipper mouth, screen fines section and 5' fiberglass section

151
Detroit 60 Series Diesel
12.7 liter, 400 hp, with 9 speed transmission, meter reads 5978 hours, came out of a semi, good unit

152
Line shaft/Hydraulic Pump Station
Clutch direct hookup to 20", 10 groove pulley then to 3"x12' line shaft with KPM Pump, type K3VL140/B and smaller pump on one end and 2 hydraulic pumps on other end and 1-M4V3525VQ30A215 & 1-MHV18VGTC-60A2, plus 6 groove pulley includes belts as marked

153
500 gal Hydraulic Reservoir
Mounted on stand

154
Phelps 40" Chip Blower
Model 40 HV-1, s/n 84936, 1850 rpm. Includes 2"x66" line shaft and square chip blower pipe/elbow.

155
24" Dust Blower
Line shaft ready

156
Line Shaft
2"x84" with 1-3 groove and 1-2 pulley

157
Newman Chipper Knife Grinder
G-200, hydraulic drive, s/n 2003-31

160A
Fuel Tank*
100 gal, good condition

157A
Chipper knives
Some new and used*

158
Air Tank/Hose Reel
In the chipper room

160B
Fuel Tank*
100 gal, good condition

159
Dust Pipe/Cyclone Outside
All dust pipe and support stands including cyclone outside

160
Fuel Tank
Approximately 300 gal

161A
Cummins Power Unit*
5.9 liter, 160hp, 6 cyclinder, in excellent condition.

161
Cummins Power Unit
5.9 liter, 160 hp, 400 ft/lb torque, with NACD clutch size 11-50, unknown hours. Came out of a truck, has additional hydraulic cooler,good unit.

161B
371 Detroit Diesel*
Good working condition

162
Hydraulic Pump Station
Line shaft station with 3 hydraulic pumps, 1-Kpm model K3VL1121A, 2 gear pump

163
Hydraulic Reservoir Tank
Approximately 300 gal with valves and filters

164
Fuel Tank
Approximately 300 gal

165
Cornell dust Blower
26" hydraulic drive, includes hydraulic valves as marked.

166
Dust Pipe
8" with elbow, approximately 60", outside

167
Phelps Dust Blower
45" with hydraulic drive, in good condition

168
Dust Pipe
Includes 2 way diverter and approximately 140' of 12" with 2 support stands and cyclone at saw dust pile

169
Dust Conveyor
Elevator type conveyor, 24' long with hydraulic drive

169A
Air Tank*
500 gal, good condition

169B
Air Tank*
500 gal, good condition

169C
Air Tank*
500 gal, good condition

170
Reserve Air Tank
Approximately 250 gal

171
Bench Grinder
Hydraulic drive, includes hyd. valve

172
Drill Press
Hydraulic drive, includes hyd. valve

173
Hydraulic Piping in Building
All hydraulic pipes inside the building, does not include the control valves at said machines.

174
10" Dust Pipe
Like new, 38' with 2-90° elbows

175
8" Dust Pipe
All 8" inside building, approximately 200", approximately 6 elbows

176
5" Dust Pipe
All 5" inside building, approximately 100', includes 3 elbows

177
Air Pipe
All air pipe in building

178
LP Heater
Infrared with thermostat controls

179
Hydraulic Cooling Fan
Fan only

179A
Fisher blade hammering anvil
Complete with stand*

179B
Fisher blade hammering anvil
Complete with stand*

180
Detroit 60 Series Diesel
12.7 liter, 400 hp, new head gasket, good running unit, no clutch

180A
Hyd. Cooling radiator
Used*

180B
Fan with Honda engine
Gx390 engine, 48" fan*

180C
Fan
48"*

181
Compressor Tank
Tank and electric motor only, 25hp electric motor

181A
Brown & Sharpe Metal Lathe
No 6 , was bought as a working unit but seller never used it*

181B
48" line shaft on stand
With 3 pulleys*

181C
Quincy air compressor
Model 4088, needs rebuilt*

181D
Propane motor out of Hyster Forklift
Was in working condition when removed ,includes radiator, transmission and controls*

181E
Clutch
In box*

181F
Radiator
Used*

181G
Radiator
Used*

181H
Radiator
Used*

181I
Radiator
Used*

181J
Radiator
Used*

181K
Pallet racking
4-12' legs and 22-12' cross arms*

181L
Lumber cart
4'x8' on steel wheels*

182
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel, with steel log bunks

183
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel

183A
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel*

184
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

185
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

186
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

187
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

188
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

189
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

190
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

191
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

192
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

193
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

194
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

195
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

196
Sticker Carts
40"x40" with steel wheels

197
Sticker Carts
40"x40" with steel wheels

198
Sticker Carts
40"x40" with steel wheels

199
Sticker Carts
36"x36" with steel wheels

200
Classic Central Boiler
Outdoor wood furnace, model CL7260, s/n 105568, Brand new in 2015, but never used.

201
Tie Stacker
Hydraulic drive, runs good.

202
Baker Incline Belt Conveyor
Hydraulic drive, uninstalled ready to load, good condition

203
Belt Conveyor
10"x26', no drive

204
Concave Belt Conveyor
18"x42', with electric gear motor drive, ready to load

205
Mellott Debarker
s/n 8120056-4, includes cab, needs work

206
Patz Barn Sweep
Needs chain

207
Transfer Deck
Incline w/lug chain 5XL10W

208
Detroit Diesel w/Clutch
NACD power take off clutch

209
Fuel Tank
300 gal fuel tank on 10' stand

210
Mellot stop and load*
48" good condition

211
Shop Built Wood Grinder*
48" Grinder head, 12"x 8' off feed belt Conveyor, Hydraulic, 52" x 10' box w/ plunger, good working condition

212
Malone band sharpener*
Hydraulic, extra Grinding wheels, good condition

213
Baldor band tooth setter*
Double tooth setter, air / Hydraulic, hyd drive, good condition

213A
32" x 15' 2 strand shop built green chain*
no drive, fair condition

214
Log deck*
32" x '18, 2 strand, hydraulic drive, good condition

215
pile of scrap steel*
variety of tubes and I beams

216
Palletmaster vertical bandsaw*
36" wheels, 4" off feed belt, hydraulic/ electric motor, electric controls, serial number 79,

217
Hydraulic Power Unit*
Electric motor, fair condition

218
Minor Edger*
30" x 6" , 3 blade, 2 movable,no drive, line shaft ready, good condition, serial number FB 8499

219
26" up cut chop saw*
7hp electric motor, infeed, out feed, fair condition

220
Morgan Deduster*
6" feed through belt, no drive, serial number 112095054, good working condition

221
Woodland 4K vertical bandsaw*
26" HB , fully hyd, W/ board edger built on the unit, 2 movable blades, 4" x 24" cap. Good Working Condition

222
100 gal Hydraulic Tank*
w/ radiator, good condition

223
371 Detroit Diesel*
model 50347001, serial number 3db00249, hrs unknown, used on the woodland mill, good working condition

224
Cummins Power Unit*
6.9 liter,160 hp, was pullled from truck, approx 70,000 miles on it, 6 cyclinder, model b5-9-160, engine # 56105705, Excellent working Condition!

225
pile of scrap steel*
.

226
steel pipe*
2 straight, 10" x 14', 12" x 19' 1 elbow, 12" x 13'

227
Precision Chipper*
48" dia., 6 knives, 3 blocked, w/ elbow pipe, very good condition

228
Fuel Tank*
250 gal with hose, on a stand, good condition

229
Fuel Tank*
250 gal, on stand, good condition

300
Tiger Cat 235B Knuckleboom
6600 hours since complete engine rebuild, approximately 14,000 total hours, grapple new 2 yrs ago. First lot of an entirety.

300a
Grapple Saw Dust Bucket
For Knuckleboom 48" wide

300b
Forks for Knuckleboom
Rough condition

301
Flatbed Train Car
With hydraulic drive

302
Train Track
825' installed plus 60' not installed

303
Entirety Lot 300-302
With 10% raise

304
325 Prentice Knuckleboom
Cummins 5.9 engine, with carrier, engine runs great, needs minor hydraulic repairs, seller plans to have fixed by auction day.

305
Custom Forklift
All wheel drive (in low gear) Custom built stand on forklift, Hyster mast, side shaft, fork positioners, Honda GX690 engine, 8000 lb lift capacity. Runs good.

306
Custom Forklift
Custom built stand on forklift, Clark mast, Honda GX390 engine, 4000 lb lift capacity

Gallery

Gallery Images Loading, Please Wait...

  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Fox River Hardwoods
 Live Auction
 
Sale Date(s)
Thursday Jul 30, 2020 Completed
Sale Location

Bloomfield, IA 52537
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

 

Date: July 30, 2020 Onsite Auction Starts at 10:00 AM with the online items starting at 11:00 AM 
Directions: From downtown Bloomfield at the intersection of 63 & W. Jefferson St., head west. Turn north on N. West St. In .5 miles turn west onto Goode St. In 2.6 miles the destination is on your right.


00
Information Lot*
Onsite Auction starts at 10:00 AM with the online portion to follow at approx. 11:00 AM

100
Log Deck
11'x36', 4 strand w/stop-n-load, hydraulic motor gear drive H18 chain. First lot of an entirety.

101
Renco Log Turner
Hydraulic drive

102
Cleereman Carriage
Model #40, s/n 40-204, 40", 3HB, air over air set works, in very good condition, w/3 Brownsville turners, includes 55' track, frame, operators cab, and controls

103
Cleereman Husk
w/top saw arbor, includes the 2 blades on the husk

104
Line Shaft w/Hydraulic Pump
Kawasaki Precision machinery pump, on 2"x30" shaft w/3 groove drive pulley, model #K3VL140/B

105
Tyrone Berry Feed
Model SMA-215, s/n A0004, 1500 psi, 1800 rpm, includes carriage drive

106
Entirety Lots 100-105
With 10% raise

107
Detroit 60 Series Diesel
12.7 liter, 450 hp, w/9speed transmission, meter reads 11,500 hrs., very good engine.

107a
Heat Exchanger
Was hooked to the Detroit Diesel lot #107

107b
Exhaust Heating Tube
Was hooked to Detroit Diesel, approximately 50'

108
Quincy Air Compressor
Model 5220, s/n 397972, size 6x3.25x4, close to new condition

109
Line Shaft
2"x9' w/3-4 groove, 1-3 groove, 1-2 swivel pulleys

110
Line Shaft w/2 hydraulic pumps
2"x30" shaft w/1-3 groove pulley and 2 hydraulic pumps

111
500 gal Hydraulic Reservoir
Mounted on stand

112
Fuel Tank
Approximately 300 gal

113
Fuel Tank
Approximately 300 gal

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

114
Oil Barrel w/Stand
Approximately 1/3 full, heavy weight oil

115
Roll Case
42' w24"x7" rolls, live with hydraulic drive, includes 2 air stops. Nice rollcase.

116
56" Saw Blade
Insert teeth "P", was still used in production

117
56" Saw Blade
Blade is not usable

118
56" Saw Blade
Insert teeth "P", was still used in production

119
56" Saw Blade
Insert teeth "P", was still used in production

120
56" Saw Blade
No teeth

120A
Topsaw blade
40" , P teeth*

121
Minor Edger
6"x36", includes in-feed and tailing belt, 2 moveable blades, #4553, includes pop up transfer in-feed, hydraulic control valves as marked.

122
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

123
Cemorline Lasor Light
Has 110v plug-in adaptor, lasers are 12 volt

124
Skate Roller
10' w/9" rolls mounted on 34" legs

125
Baker Resaw
Model BBR-O, single head resaw with return, hydraulic drive, 10" capacity, includes hydraulic control valve bank as marked.

126
Go Fast Deduster
Hydraulic drive,includes hydraulic valve and speed control, great condition!

126A
2'x4' table
Offbearing table from resaw*

126B
Corner stacking plate
Made with plywood*

127
Manual Chop saw
22" blade, hydraulic motor, live in-feed/out-feed, 12"x4 rolls, includes valve controls as marked

128
Cant Unscrambler
8', hydraulic gear motor drive, 48" high, good condition

129
Mellot Cant Deck
3 strand, 8'x12', hydraulic motor with Tulsa gear drive

130
Crosby Edger
Currently setup w 4 stationary blades, 5"x32", line shaft ready. First lot of an entirety.

131
Belt Conveyor
32"x12' with 33" legs, hydraulic drive, out feed for edger

132
Belt Conveyor
12"x9', with hydraulic drive, was used as waste conveyor under edger

135A
Woodland K4 Upright Bandsaw*
4-HB, 1 1/2" Band, Fully Hyd, W/Board Edger built on Unit, 4" x 24" Cap. Good working Condition.

133
Deutz Diesel
6 cylinder, 2300 rpm, with NACD power take off clutch, size 11SS

134
Line Shaft
2"x11'6" with 1-3 groove pulley on each end, was being used to run the edger

135
Entirety Lots 130-134
With 10% raise

136
Skate Roller
14"x12' with 36" legs

137
Air Hoist
1 ton, CP1100, with approximately 24' of track

138
Belt Conveyor
24"x32' with hydraulic drive, on steel legs

139
Fast Line Saw System
Gator Products, model FLSE, s/n 0227-03, good condition

140
Skate Roller
9"x10' by 36" high

141
Skate Roller
9"x10' by 36" high

142
Transfer Deck
10'x6'x32", steel plate, in-feed roll, C55B chain, hydraulic drive

143
Green Chain
3 strand, 30x8, hydraulic drive

144
DeWalt Air Chop saw
with in-feed/out-feed rolls

145
Vertical Gang Saw with Sizer
Shop built, 5.5" blade capacity, currently set up for 3.5", was being run with hydraulic but pump is missing.

145a
Dust Blower
20" , line shaft ready 

145B
Offbearing table and corner stacking plate
Both wooden*

146
Precision 48" Chipper
Size 48-11, s/n C-2499, 900 rpm, top discharge, good condition. First lot of an entirety.

149A
58" Precision Chipper*
6 knives, 3 are blocked, Good working Condition.

147
Chip Cyclone
Includes elbow from chipper

148
Precision Chip Screen
7'x7', s/n S-1147, good condition

149
Entirety Lots 146-148
With 10% raise

150
Precision Vibrating Conveyor
112', new in 2015, with hydraulic drive, in very good condition, comes with magna wedge, chipper mouth, screen fines section and 5' fiberglass section

151
Detroit 60 Series Diesel
12.7 liter, 400 hp, with 9 speed transmission, meter reads 5978 hours, came out of a semi, good unit

152
Line shaft/Hydraulic Pump Station
Clutch direct hookup to 20", 10 groove pulley then to 3"x12' line shaft with KPM Pump, type K3VL140/B and smaller pump on one end and 2 hydraulic pumps on other end and 1-M4V3525VQ30A215 & 1-MHV18VGTC-60A2, plus 6 groove pulley includes belts as marked

153
500 gal Hydraulic Reservoir
Mounted on stand

154
Phelps 40" Chip Blower
Model 40 HV-1, s/n 84936, 1850 rpm. Includes 2"x66" line shaft and square chip blower pipe/elbow.

155
24" Dust Blower
Line shaft ready

156
Line Shaft
2"x84" with 1-3 groove and 1-2 pulley

157
Newman Chipper Knife Grinder
G-200, hydraulic drive, s/n 2003-31

160A
Fuel Tank*
100 gal, good condition

157A
Chipper knives
Some new and used*

158
Air Tank/Hose Reel
In the chipper room

160B
Fuel Tank*
100 gal, good condition

159
Dust Pipe/Cyclone Outside
All dust pipe and support stands including cyclone outside

160
Fuel Tank
Approximately 300 gal

161A
Cummins Power Unit*
5.9 liter, 160hp, 6 cyclinder, in excellent condition.

161
Cummins Power Unit
5.9 liter, 160 hp, 400 ft/lb torque, with NACD clutch size 11-50, unknown hours. Came out of a truck, has additional hydraulic cooler,good unit.

161B
371 Detroit Diesel*
Good working condition

162
Hydraulic Pump Station
Line shaft station with 3 hydraulic pumps, 1-Kpm model K3VL1121A, 2 gear pump

163
Hydraulic Reservoir Tank
Approximately 300 gal with valves and filters

164
Fuel Tank
Approximately 300 gal

165
Cornell dust Blower
26" hydraulic drive, includes hydraulic valves as marked.

166
Dust Pipe
8" with elbow, approximately 60", outside

167
Phelps Dust Blower
45" with hydraulic drive, in good condition

168
Dust Pipe
Includes 2 way diverter and approximately 140' of 12" with 2 support stands and cyclone at saw dust pile

169
Dust Conveyor
Elevator type conveyor, 24' long with hydraulic drive

169A
Air Tank*
500 gal, good condition

169B
Air Tank*
500 gal, good condition

169C
Air Tank*
500 gal, good condition

170
Reserve Air Tank
Approximately 250 gal

171
Bench Grinder
Hydraulic drive, includes hyd. valve

172
Drill Press
Hydraulic drive, includes hyd. valve

173
Hydraulic Piping in Building
All hydraulic pipes inside the building, does not include the control valves at said machines.

174
10" Dust Pipe
Like new, 38' with 2-90° elbows

175
8" Dust Pipe
All 8" inside building, approximately 200", approximately 6 elbows

176
5" Dust Pipe
All 5" inside building, approximately 100', includes 3 elbows

177
Air Pipe
All air pipe in building

178
LP Heater
Infrared with thermostat controls

179
Hydraulic Cooling Fan
Fan only

179A
Fisher blade hammering anvil
Complete with stand*

179B
Fisher blade hammering anvil
Complete with stand*

180
Detroit 60 Series Diesel
12.7 liter, 400 hp, new head gasket, good running unit, no clutch

180A
Hyd. Cooling radiator
Used*

180B
Fan with Honda engine
Gx390 engine, 48" fan*

180C
Fan
48"*

181
Compressor Tank
Tank and electric motor only, 25hp electric motor

181A
Brown & Sharpe Metal Lathe
No 6 , was bought as a working unit but seller never used it*

181B
48" line shaft on stand
With 3 pulleys*

181C
Quincy air compressor
Model 4088, needs rebuilt*

181D
Propane motor out of Hyster Forklift
Was in working condition when removed ,includes radiator, transmission and controls*

181E
Clutch
In box*

181F
Radiator
Used*

181G
Radiator
Used*

181H
Radiator
Used*

181I
Radiator
Used*

181J
Radiator
Used*

181K
Pallet racking
4-12' legs and 22-12' cross arms*

181L
Lumber cart
4'x8' on steel wheels*

182
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel, with steel log bunks

183
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel

183A
Lumber Cart
42"x108", steel wheels, 2 stationary, 2 swivel*

184
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

185
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

186
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

187
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

188
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

189
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

190
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

191
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

192
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

193
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

194
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

195
Lumber Cart
36"x72", 2 stationary, 2 swivel, steel wheels

196
Sticker Carts
40"x40" with steel wheels

197
Sticker Carts
40"x40" with steel wheels

198
Sticker Carts
40"x40" with steel wheels

199
Sticker Carts
36"x36" with steel wheels

200
Classic Central Boiler
Outdoor wood furnace, model CL7260, s/n 105568, Brand new in 2015, but never used.

201
Tie Stacker
Hydraulic drive, runs good.

202
Baker Incline Belt Conveyor
Hydraulic drive, uninstalled ready to load, good condition

203
Belt Conveyor
10"x26', no drive

204
Concave Belt Conveyor
18"x42', with electric gear motor drive, ready to load

205
Mellott Debarker
s/n 8120056-4, includes cab, needs work

206
Patz Barn Sweep
Needs chain

207
Transfer Deck
Incline w/lug chain 5XL10W

208
Detroit Diesel w/Clutch
NACD power take off clutch

209
Fuel Tank
300 gal fuel tank on 10' stand

210
Mellot stop and load*
48" good condition

211
Shop Built Wood Grinder*
48" Grinder head, 12"x 8' off feed belt Conveyor, Hydraulic, 52" x 10' box w/ plunger, good working condition

212
Malone band sharpener*
Hydraulic, extra Grinding wheels, good condition

213
Baldor band tooth setter*
Double tooth setter, air / Hydraulic, hyd drive, good condition

213A
32" x 15' 2 strand shop built green chain*
no drive, fair condition

214
Log deck*
32" x '18, 2 strand, hydraulic drive, good condition

215
pile of scrap steel*
variety of tubes and I beams

216
Palletmaster vertical bandsaw*
36" wheels, 4" off feed belt, hydraulic/ electric motor, electric controls, serial number 79,

217
Hydraulic Power Unit*
Electric motor, fair condition

218
Minor Edger*
30" x 6" , 3 blade, 2 movable,no drive, line shaft ready, good condition, serial number FB 8499

219
26" up cut chop saw*
7hp electric motor, infeed, out feed, fair condition

220
Morgan Deduster*
6" feed through belt, no drive, serial number 112095054, good working condition

221
Woodland 4K vertical bandsaw*
26" HB , fully hyd, W/ board edger built on the unit, 2 movable blades, 4" x 24" cap. Good Working Condition

222
100 gal Hydraulic Tank*
w/ radiator, good condition

223
371 Detroit Diesel*
model 50347001, serial number 3db00249, hrs unknown, used on the woodland mill, good working condition

224
Cummins Power Unit*
6.9 liter,160 hp, was pullled from truck, approx 70,000 miles on it, 6 cyclinder, model b5-9-160, engine # 56105705, Excellent working Condition!

225
pile of scrap steel*
.

226
steel pipe*
2 straight, 10" x 14', 12" x 19' 1 elbow, 12" x 13'

227
Precision Chipper*
48" dia., 6 knives, 3 blocked, w/ elbow pipe, very good condition

228
Fuel Tank*
250 gal with hose, on a stand, good condition

229
Fuel Tank*
250 gal, on stand, good condition

300
Tiger Cat 235B Knuckleboom
6600 hours since complete engine rebuild, approximately 14,000 total hours, grapple new 2 yrs ago. First lot of an entirety.

300a
Grapple Saw Dust Bucket
For Knuckleboom 48" wide

300b
Forks for Knuckleboom
Rough condition

301
Flatbed Train Car
With hydraulic drive

302
Train Track
825' installed plus 60' not installed

303
Entirety Lot 300-302
With 10% raise

304
325 Prentice Knuckleboom
Cummins 5.9 engine, with carrier, engine runs great, needs minor hydraulic repairs, seller plans to have fixed by auction day.

305
Custom Forklift
All wheel drive (in low gear) Custom built stand on forklift, Hyster mast, side shaft, fork positioners, Honda GX690 engine, 8000 lb lift capacity. Runs good.

306
Custom Forklift
Custom built stand on forklift, Clark mast, Honda GX390 engine, 4000 lb lift capacity

Gallery