Oak Valley Hardwoods, Inc- Robbinsville
Listing ID#: 330186

Sale Location

ROBBINSVILLE, NC 28771
Sale Dates and TimesSALE IS COMPLETED
Friday Aug 28, 2020 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 

  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.


 


  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:


IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 

  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.


“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 

  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.


 


  1. Auction Conducted in the State of Indiana.


 




    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.

    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.




 


  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.




The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 

  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.

  2. Nature of the Auction.




X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 

  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.


 


  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.


 


  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:


 




    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.




 




    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.




 




    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.




 




    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.




 




    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.




 




    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.




 




    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.




 




    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.




 




    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,




(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 



    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.




 




    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.




 




    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.




 




    1. Online Bids. Online bids may not be reduced or retracted.




 


  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.


 


  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.


 


  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.


 


  1.  


 


  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.


 


  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.


 


  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.


 


  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.


 


  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.


 


  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or


representation by Auctioneer

 

  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.




  1.  


Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 

  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.


 


  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the




vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 

  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.


 


  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.


 


  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.


 


  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.


 


  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.


 


  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.


 


  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.


 


  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.


 


  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.










 

  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled


to specific performance or other equitable relief.

 

  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.


 


  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.


 


  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.


 


  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.


 


  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.


 


  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.


 


  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.




 
Listing Information
Winning bidders have 30 days to remove the larger equipment.

Winning bidders of boiler and buildings have 120 days to remove. 

Rigging is the responsibility of the buyer and all riggers will need to be properly insured.

Rigging and load-out may be scheduled by calling Zach Kittrell at 931.224.0699.

00
Information Lot
Auction is set to start at 10:00 Am EST, we will follow the online catalog in order, we plan to sell the rolling stock at 2:00 PM regardless of where we are in the catalog order. 

100
*All Steel Bin
4' x 6', 46" deep

100A
*All Steel Bin
4' x 6', 46" deep

100B
*All Steel Bin
4' x 6', 46" deep

101
*Baker's Brother Waste Equipment
6' x 6' x 6', (8) cy dumpster

102
*5 HP Hydraulic Pack
and box w/ steel & wire

103
*Control Station
for spindle less lathe

104
*H-78 Chain
entire pallet

104A
*Shark Bite Pex Line
(2) New Rolls 1/2”x300’ shark Bite pex water line

105
*81X Lug Chain
(1) Rolls on Pallet

107
*NEW H-78 RT Chain
(2) Huge Packed Stacks

108
*Electric Motors
7.5 HP, (2) 5 HP, 2 HP, 1 HP, Nema 0 Starter and Motor Brackets

109
*Bearings & Sprockets
Pillow Block Approx. # (6) 2", (2) 3 7/16", (4) 1 7/16", (1) 2 1/4" Type, (3) 1 15/16"-2", Double Drive Sprockets, Chain Sprockets

110
*Drives & Motors
(2) Toshiba 3 HP, (1) Tea Xinlian Reduction Drive, (2) Right Angle Reduction Drives & (2) 24" W x 10" Hourglass Rolls

111
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

112
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

113
*10 HP Motor
880 RPM 230/460 V 284 T Frame

114
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

115
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

116
*10 HP Kiln Fan Motor
SII

117
*Barrel Dolly
.

118
*Charger Booster
Fleet

119
*Floor Vacuum
Elgee

120
*Grill
Pretty Nice

121
*Breakers & Conduit Fittings
Schneider 60 AMP, Electrical Conduit Fittings

122
*Lot of Chairs
.

123
*Misc. Steel, Drives, Etc.
Misc. Steel at Log Entry Building Door, Step Ladder Drives Motors, Light Plant Plywood w/ I-Beam, Sprockets & Bearings

125
*6 HP Shop Vac
Craftsman 16 Gallon

126
*(2) Roller Chain Conveyors
6' x 23" w/ HD 140 RC Chain

127
*Belt Conveyor Section
w/ 1 HP Motor

128
*1 HP Motor
for Lathe Conveyors (Spare)

128A
*1 HP Motor
for Lathe Conveyors (Spare)

128B
*1 HP Motor
for Lathe Conveyors (Spare)

128C
*1 HP Motor
for Lathe Conveyors (Spare)

129
*Stacking Rack
Veneer Core or Dimension (to right of lathes)

130
*Maintenance Room and Parts
for Lathe Lines Includes All Shelves, Cabinets Outside Room as Marked and OSHA Rail NOT Installed, Yellow Steel Outside Room, Green 5 x 6 1/2' Cabinet, Misc. Steel Along Wall to the Far Right

131
*Crossover Stairs
.

132
(2) Roller Chain Conveyors
6', Steel Plate

133
*Steel Work Table, Contents
4' x 8', Includes Roller Chain & Contents

134
* Pedestal Fan
3'

200
TREE LENGTH LOG DECK
25' 4 STRAND TREE LENGTH LOG DECK, 24' WIDE HAS 2 INDEPENDENT DRIVE; H78 CHAIN, AND STOP AND LOADER SYSTEM, SUPPORTS TO THE GROUND

201
ENDWISE LOG TROUGH
40' ENDWISE LOG TROUGH, 110 LADDER BACK CHAIN, HYDARULIC DRIVE; STEEL SUPORTS TO GROUND, CHAIN WILL NEED REPLACED BEFORE LONG.

202
BREWCO SLASHER SAW
BREWCO SLASHER SAW 60" INSERTED TOOTH SAW, CLIMATE CONTROL CAB AND CONTROLS, 40 HP ELECTRIC MOTOR, 2 HYDRAULIC OPERATED LOG HOLD DOWNS ON INFEED; 2 HYSTRAULIC OPERATED LOG HOLD DOWNS ON OUTFEED, INCLUDES 12' OUTFEED ENDWISE LOG TROUGH WITH 110 LADDER BACK CHAIN AND TWO KICKERS. HYDRAULIC DRIVE, NO HYDRAULIC SUPPLY.

202a
6'X8' REJECT LOG TABLE

202B
15'X12" WASTE CONVEYOR; GEAR MOTOR DRIVE

202C
10 HP HYDRAULIC SUPPLY UNIT

203
CATWALK SECTION
4'X20' CATWALK SECTION AT MERCHANDISING SYSTEM

204
TIE BACK OF 200-203 WITH 10% RAISE
TIE BACK OF LOTS 200-203 WITH A 10% RAISE

205
HOURGLASS ENDWISE LOG TROUGH
38' HOURGLASS ENDWISE LOG TROUGH WITH (27) 20" WIDE HOURGLASS ROLLS, NO HYDRAULIC SUPPLY, HYDRAULIC DRIVE, STEEL SUPPORTS TO THE GROUND

206
LOG KICKER SYSTEM
4' LOG KICKER SYSTEM. HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM. NO HYDRAULIC SUPPLY. STEEL SUPPORTS TO THE GROUND

207
ENDWISE LOG CONVEYOR
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

208
LOG KICKER SYSTEM
4' LOG KICK SYSTEM, HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM, NO HYDRAULIC SUPPLY, STEEL SUPPORTS TO THE GROUND

209
ENDWISE LOG TROUGH
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

210
ROLLCASE
11' ROLLCASE HYDRAULIC LIFT LOG KICKERS, 48" LOGS

211
HYDRAULIC PACK
15 HP HYDRAULIC PACK

212
TIE BACK OF 205-210 WITH 10% RAISE
TIE BACK OF LOTS 205-210 WITH 10% RAISE

213
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

214
HAUL UP LOG DECK
7'X3' 3 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

264

215
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

216
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

217
VENEER BACK PEELER
SPINDLELESS 4' VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

218
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

219
TIE BACK LOTS 213-218 WITH 10% RAISE
TIE BACK OF LOTS 213-218 WITH A 10% RAISE

220
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

221
HAUL UP LOG DECK
7'X3' 2 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

222
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

223
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

224
VENEER BACK PEELER
SPINDLELESS 4’ VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

225
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

226
TIE BACK LOTS 220-225 WITH 10% RAISE
TIE BACK OF LOTS 220-225 WITH A 10% RAISE

227
HYDRAULIC PACK
15 HP HYDRAULIC PACK

228
LOG DECK
48'X8' 4 STRAND LOG DECK WITH H78 CHAIN WITH HJYDRAULIC DRIVE, NO HYDRAULIC SUPPLY

229
HAUL UP LOG DECK
7'X8' HAUL UP DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

230
LOG DEBARKER
8' ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

231
ENDWISE LOG TROUGH
10' ENDWISE LOG TROUGH (5) 20"X10" HOURGLASS ROLLS

232
VENEER BACK PEELER
SPINDLELESS 8’ VENEER BACK PEELER (105") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

233
XUANJIN MACHINE CO. LTD VENEER STACKER
XAUNJIN MACHINE CO. LTD VENEER STACKER (9'X5') TO INCLUDE 22' INFEED BELT SYSTEM COMPLETELY SELF CONTAINED, CONTROLS ATTACHED

234
HYDRAULIC PACK
20 HP HYDRAULIC PACK

235
TIE BACK OF 228-234 WITH 10% RAISE
TIE BACK OF LOTS 228-234 WITH A 10% RAISE

236
BELT CONVEYOR
65' BELT CONVEYOR WITH 24" CLEATED BELT, GEAR REDUCTION DRIVE

237
BELT CONVEYOR
55' BELT CONVEYOR WITH 18" BELT, GEAR REDUCTION DRIVE

238
CATWALK SECTION
(2) CATWALK SECTIONS AT DEBARKER

239
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239A
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239B
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

240
HIGH PRECISION MACHINE TOOL KNIFE GRINDER
HIGH PRECISION MACHINE TOOL KNIFE GRINDER HAS (2) 52"X7" MAGNETIC HOLDING PLATES, OVERALL WIDTH 162", SELF CONTAINED MOTOR CONTROLS

241
SPARE KNIVES FOR PEELER
(2) 106" SPARE KNIVES FOR PEELER

242
SPARE KNIVES FOR PEELER
(2) 59" SPARE KNIVES FOR PEELER

243
ELECTRIC PANEL
ELECTRIC PANEL TO INCLUDE 300 AMP DISCONNECT, (2) SIZE 4 STARTERS, (2) WEG SOFT START SSW-03 PLUS, MISC CUT OFFS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

244
DISCONNECT
SQUARE D 800 AMP DISCONNECT. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245
CONTROL PANEL
CONTROL PANEL TO INCLUDE (5) 30 AMP DISCONNECTS, (5) SIZE 2 STARTERS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245A
(2) MOTOR CONTROL PANELS FOR WEIMA SLOW SPEED GRINDER

246
VENEER DRYER
4 TRAY VENEER DRYER, CONTROLS, INCLUDES INFEED LOADING SYSTEM; OUTFEED BELT CONVEYOR, STEAM PIPE TO FIRST CUT OFF AT MAIN PIPE SYSTEM. BLOW PIPE TO ROOF ONLY
 

246A
Lumber cart
8’x4’ STEEL LUMBER CART

246B
LUMBER CART
4x8’ STEEL LUMBER CART

246C
LUMBER CART
4’x8’ STEEL LUMBER CARR

246D
LUMBER CART
4’x8’ STEEL LUMBER CART

246E
STEEL PEDALSTAL
55”x110” x 11”  ALL ONE MONEY

247
VENEER DEFECT MACHINE

248
VENEER DEFECT MACHINE

249
VENEER DEFECT MACHINE

329
GARDNER DENVER AIR COMPRESSOR
GARDNER DENVER 10 HP TANK MOUNT AIR COMPRESSOR WITH CONTROLS AS MARKED

330
GENERAL PHEUMATICS REFRIGERATED COMPRESSED AIR DRYER
GENERAL PNEUMATICS REFREGERATED COMPRESSED AIR DRYER, (MODEL TKF1000A), CUT OFF CONTROLS ATTACHED

255
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER, NEW! NEVER INSTALLED!!

256
HESHAN JIE DING MACHINERY COMPANY AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 4' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

262
HESHAN JIE DING MACHINERY COMPANY8' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 8' DOUBLE SIDED GLUE SPREADER NEW! NEVER INSTALLED!!

263
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

266
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE)
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE) NEW! NEVER INSTALLED!!

267
HENSHAN JIE DING COLD PRESS MACHINE (SPLIT TYPE)

272
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED)
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED) NEW!

273
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR NEW! NEVER INSTALLED!!

275
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER NEW! NEVER INSTALLED!!

276
HESHAN JIE DING MACHINERY COMPANY FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE
HESHAW JIE DING MACHINE COMPANY 4' FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE NEW! NEVER INSTALLED!!

277
HESHAN JIE DING MACHINERY COMPANY 8' TRIM SAW MACHINE
HESHAN JIE DING MACHINERY COMPANY 8' FULLY AUTOMATIC ROLLER TRIM SAW MACHINE NEW! NEVER INSTALLED!!

280
*COMPLETE VENEER TO PLYWOOD LINE*
LOTS 255,256,262,263,266,267,272,273,275,276,277 AS AN ENTIRETY WITH A 10% RAISE TO ALSO INCLUDE ALL TRANSFER EQUIPMENT, ELECTRICAL AND PARTS 

285
SUPER SOUND 2 HEAD SANDING MACHINE
MMNH5613DR SUPER SOUND 2 HEAD 56” WIDE SANDING MACHINE NEW! NEVER INSTALLED!!

300
LUMBER BREAK DOWN SYSTEM
LUMBER BREAK DOWN SYSTEM TO INCLUDE 25'X11' 4 STRAND PACKAGE DECK, TULSA WENCH GEAR REDUCTION DRIVE; 3 ARM, 7 ' BREAK DOWN CHAIN LIFT WITH TULSA WINCH DRIVE, 10' X11' LUMBER TRANSFER DECK, 81X CHAIN; 25' STICK REMOVAL CONVEYOR WITH 10" BELT DRIVE, NO MOTOR CONTROLS

345A

301
BELT CONVEYOR

302
CONTROL STATION CONTROLS

303
LUMBER DECK
16' X11' 4 STRAND LUMBER DECK WITH C55B ROOF TOP CHAIN, MOTOR REDUCTION DRIVE

304
HMC DOUBLE END TRIMMER
HMC 16' DOUBLE END TRIMMER MODEL ET10 (SN: 347-98), 24" SAWBLADES

305
BELT CONVEYOR
22' BELT CONVEYOR WITH 20" BELT UNDER TRIMMER

306
BELT CONVEYOR
10' BELT CONVEYOR 28" BLET GEAR MOTOR DRIVE FROM TRIMMER

307
GREEN CHAIN DECK
70'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN WITH TAIL SPROCKET SHAFT, GEAR MOTOR DRIVE

308
GREEN CHAIN DECK
73'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN, GEAR REDUCTION DRIVE, NO HEAD SHAFT, 36" LUMBER PULL ROLLS

309
TIE BACK LOTS 300-308 WITH 10% RAISE
TIE BACK OF LOTS 300-308 WITH A 10% RAISE

310
LUMBER CART
15'X52" LUMBER CART

310A
LUMBER CART
15'X52" LUMBER CART

310B
LUMBER CART
16'X52" LUMBER CART

310C
LUMBER CART
15'X52" LUMBER CART

310D
LUMBER CART
15'X52" LUMBER CART NO WHEELS

310E
LUMBER CART
15'X52" LUMBER CART

311
LUMBER CART
14'X40" LUMBER CART

311A
LUMBER CART
14'X40" LUMBER CART

311B
LUMBER CART
14'X40" LUMBER CART

311C
LUMBER CART
14'X40" LUMBER CART

311D
LUMBER CART
14'X40" LUMBER CART

311E
LUMBER CART
14'X40" LUMBER CART

311F
LUMBER CART
14'X40" LUMBER CART

311G
LUMBER CART
14'X40" LUMBER CART

311H
LUMBER CART
14'X40" LUMBER CART

311I
LUMBER CART
14'X40" LUMBER CART

312
CONTROL CENTER
CONTROL CENTER UNDER BREAK DOWN SYSTEM

313
DISCONNECT
200 AMP SQ. D DISCONNECT

325
MEREEN JOHNSON MULTI GANG RIP SAW
MEREEN JOHNSON 3300 DCS MULTI GAND RIP SAW (SN: MJ5688) WITH SLANT BED FEED SYSTEM (5282 HOURS), ELECTRICAL CONTROLS ATTACHED

326
SPARE ARBORS SAWS AND SPACERS
SPARE ARBOR SAWS AND SPACERS

327
MATTISON 404 RIP SAW
MATTISON 404 RIP SAW (MODEL: 3J1934M004), 20 HP MOTOR, TYPE: CMP45

328
BLACK AND DECKER MAGNETIC DRILL PRESS
BLACK AND DECK 3/4" MAGNETIC DRILL PRESS (SN: 3060154)

331
DISCONNECT
SQ. D 200 AMP DISCONNECT

332
DRY KILN #1,CONTROLS AND DOOR
DRY KILN #1, CONTROLS, DOOR

333
DRY KILN #2, CONTROLS AND DOOR
DRY KILN #2, CONTROLS, DOOR

334
DRY KILN #3, CONTROLS AND DOOR
DRY KILN #3, CONTROLS, DOOR

335
DRY KILN #4, CONTROLS AND DOOR
DRY KILN #4, CONTROLS, DOOR

336
DRY KILN #5, CONTROLS AND DOOR
DRY KILN #5, CONTROLS, DOOR

337
DRY KILN #6, CONTROLS AND DOOR
DRY KILN #6, CONTROLS, DOOR

338
DRY KILN #7, CONTROLS AND DOOR
DRY KILN #7, CONTRLOLS, DOOR

339
DRY KILN # 8, CONTROLS AND DOOR
DRY KILN #8, CONTROLS, DOOR

340
DRY KILN #9, CONTROLS AND DOOR
DRY KILN #9, CONTROLS, DOOR

341
SAMPLE OVEN

342
HURST WASTE FIRE BOILER
HURST 400 HP HYBRID WASTE FIRE BOILER, CONTROLS, AUTOMATIC FEED SYSTEM (SN: HYB2925/150) (BUILT: 1999 JOB #110) HURST MOVED AND SET THIS BOILER UP FOR OAK VALLEY HARDWOODS. HURST CHECKED IT OUT AND IT IS IN A-1 CONDITION!

343
INDUSTRIAL BOILER SYSTEM
LIKE NEW INDUSTRIAL BOLER SYSTEM, RAM TYPE FEEDER INCLUDES CONTROLS AS MARKED, 15 HP MOTOR (WAS INSTALLED NEW BY HURST WHEN BOILER SYSTEM WAS PUT IN)

344
VIBRATING CONVEYOR
25'X20" VIBRATING CONVEYOR WITH 7" SIDES

346
LARGE QUANITY OF PROCESSED AND DRIED VENEER
LARGE QUANITY OF PROCESSED AND DRIED VENEER, INCLUDES ALL VENEER ONSITE

347
7' STACKING STICKS

348
4X4 BUNK DIVIDERS

4X4 BUNK DIVIDERS

349
CORES

350
DIP TANK
10'8"X20'2"X6'4" LUMBER DIP TANK WITH COMPLETE HYDRAULIC SYSTEM

351
IRVINGTON MOORE PACKAGE DECK
29'X14' IRVINGTON MOORE 4 STRAND PACKAGE DECK (1) NEW STRAND IS ON GROUND TO BE PUT ON, RUFNER 10 HP GEAR REDUCTION DRIVE

352
IRVINGTON MOORE HAUL UP DECK
11'X14' IRVINGTON MOORE 4 STRAND HAUL UP DECK, GEAR REDUCTION DRIVE, STEEL SUPPORT TO GROUND

353
IRVINGTON MOORE UNSCRAMBLER
5' IRVINGTON MOORE PADDLE TYPE UNSCRAMBLER WITH EVENENDER ROLLS, STEEL SUPPORTS TO THE GROUND

354
IRVINGTON MOORE GRADING STATION
IRVINGTON MOORE GRADING STATION WITH 11' 6 STRAND DECK, H78B ROOF TOP CHAIN, SLAT EVENENDER DEVICE, GRADING TABLE, 2 WAY SORT SYSTEM AND PUSH BUTTON CONTROLS

355
IRVINGTON MOORE REJECT BOARD CONVEYOR
IRVINGTON MOORE 20' REJECT BOARD CONVEYOR WITH 24" BELT UNDER GRADING STATION

356
IRVINGTON MOORE LUMBER DECK
IRVINGTON MOORE 32'X12' 4 STRAND LUMBER DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

357
IRVINGTON MOORE LUMBER STACKER
IRVINGTON MOORE 7' 4 ARM CHAIN TYPE LUMBER STACKER TO INCLUDE STICK PLACING STATION, LUMBER ELEVATED ROLL CASE,HYDRAULIC PACK, ALL DRIVES AND CONTROLS AS MARKED

358
ROLLCASE
55' ROLL CASE WITH (21) 88" ROLLS, 2 ARE INDEPENDENTLY POWERED WITH GEAR REDUCTION DRIVES

359
STICK DECK
45' 3 STRAND STICK DECK WITH DRIVE

360
TIE BACK LOTS 351-359 WITH 10% RAISE
TIE BACK OF LOTS 351-359 WITH A 10% RAISE

361
FIRE POOF CABINET
43"X65" FIRE PROOF CABINET

362
(4) PEDESTAL FANS

362A
(2) CONVEX MIRRORS
(2) CONVEX MIRRORS
 

363
HANGING BOX FAN
3'X3' HANGING BOX FAN

364
JACKSON & CHURCH WASTE OIL BURNING FLEX AIR FURNACE
JACKSON & CHURCH FLEX AIR FURNACE WASTE OIL BURNING, INCLUDES TANK OUTSIDE

365
ROLL AROUND LADDER
4 STEP 3' ROLL AROUND LADDER

366
PALLET JACK
5500 LB. PALLET JACK, 20" WIDE

367
WOOD CRATE AND CONTENTS

368
VERTICAL BARREL DOLLY

369
HORIZONTAL BARREL DOLLY

370
CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 DESK, 6 CHAIRS, REFRIGERATOR, FILE CABINET, MICROWAVE, SAMSUNG WALL AIR CONDITIONER

371
WASTE BIN
4'X4'X4' WASTE BIN

372
B-23934 SPROCKETS
(9) B-23934 SPROCKETS

373
METAL CABINET WITH CONTENTS

374
METAL CABINET WITH CONTENTS

375
LADDER
(2) LADDERS

376
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE/ (1) OUTSIDE MAIN OFFICE
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE (1) OUTSIDE MAIN OFFICE

377
BUILDING
40'X150' PREFAB METAL BUILDING WITH 20' SIDES, 3 ROLL UP DOORS, 2 WALK IN DOORS

377A
ELECTRIC PANEL
ELECTRIC PANEL AS MARKED TO INCLUDE (2) 200 AMP DISCONNECTS, (3) 100 AMP DISCONNECTS (2) MISC ELECTRICAL BOXES, )1) BREAKER BOX (1) 37.5 KVA TRANSFORMER

377B
SPRINKLER SYSTEM AT STACKER

378
FUEL TANK
FUEL TANK OUTSIDE OF GRADING STATION BUILDING

380
*30’x30’ shop building
* ALL STEEL SHOP BUILDING 30’x30’x20’ EVE 20’x20’ ROLLUP DOOR 2- WALK IN DOORS.

381
CONCRETE LUMBER BUNK
ALL CONCRETE LUMBER BUNKS ON YARD

382
CONTAINER LOADING RAMP

505

383
LUMBER BUNK TOPPERS

384
ALL LOGS ON LOG YARD

385
CONVEYOR
3 STRAND-4 ARM STOP AND LOADER WITH 10' ROLLER CHAIN, NO DRIVE

618
OFFICE- STORAGE DRAWER
3 DRAWER WOODEN STORAGE UNIT

386
LOG LOADER
18' - 6 STRAND LOG LOADER WITH GEAR MOTOR DRIVE- 2 STRANDS NOT ATTACHED

387
TRANSFER DECK
(3) 5' TRANSFER DECKS

388
LOG TROUGH
22' ENDWISE LOG TROUGH 10" 110 LADDER BACK CHAIN/HYDRAULIC DRIVE

389
CATWALK AN MISC STEEL
CATWALK AND MISC STEEL AS MARKED

390
LOG TROUGH
15' ENDWISE LOG TROUGH DUAL H78 CHAIN, GEAR REDUCTION DRIVE

391
LOG TROUGH
3 SECTIONS OF 30' ENDWISE LOG TROUGH, NO CHAIN, GEAR REDUCTIONS DRIVE

392
TIME SAVER 3 HEAD SANDER
TIME SAVER 3 HEAD SANDER, MODEL 852-6CR (SN: 19349) 52" width Capacity, 13" Loading Space, Cross Belt 25hp 230/460 3phase, Platen Head with sensing 25hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Cross belt stroke sander 20hp 230/460 3 phase, Panel cleaning Brush, Hydraulic motor/ tank assembly 15 hp, 230/460v 3 phase, Vacuum feed belt, Hydraulic variable speed feed, Lenze Smvector AC tech drive controller, Vacuum assembly, Free standing operator control console S/N 19340, Please Note: the Doucet BTWB3-48 Outfeed Motorized Roller Conveyor IS NOT INCLUDED in this lot. Sander shows some rust from being placed outside, but is in good working condition.

392A
*Multi-Rip Saw*
2nd Industrial Wood Working Machine, 30" Cap, with 8 sawblade Capacity, Good Working Condition

393
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP CHARGE, MISSING COVER, NO MOTOR

394
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP DSICHARGE (SN: F1.F1L.1101) 75 HP MOTOR

395
BELT CONVEYOR
12' X24" BELT CONVEYOR THAT FED GRINDER, GEAR MOTOR DRIVE

396
BELT CONVEYOR
21'X18" BELT CONVEYOR WITH GEAR MOTOR DRIVE

397
PEEL AND STICK ROOFING
PALLET OF LIBERTY SBS SELF ADHERING "PEEL AND STICK" ROOFING (18) PALLET WITH 12 BOXES, (1) PALLET WITH 10 BOXES 100 FEET PER BOX COLOR: BLACK

398
AIR COMPRESSOR
GARDNER DENVER 200 HP ELECTRA SCREW TYPE AIR COMPRESSOR. MODEL EDP99C, (SN: S062586)

399
AIR COMPRESSOR
SULAIR LS-25 20 HP SCREW TYPE AIRCOMPRESSOR, (HOURS: 5685)

400
AIR DRYING SYSTEM
2009 PNEUMATECH AIR DRYING SYSTEM: TYPE: AD1250

401
METAL SHELF AND CONTENTS IN BACK OF BUILDING

402
METAL SHELF AND CONTENTS IN BACK OF BUILDING

403
METAL SHELF AND CONTENTS IN BACK OF BUILDING

404
METAL SHELF AND CONTENTS IN BACK OF BUILDING

405
CONTENTS OF ROOM NOT ALREADY SOLD

406
CONTENTS OF ROOM
CONTENTS OF ROOM IN BACK OF BUILDING

450
BLOWER
CAROLINA MODEL 40" BLOWER, 40 HP MOTOR CONTROLS ATTACHED

451
KOGER BLOWER MODEL CW0360
KOGER BLOWER MODEL CW-60 WITH 40 HP MOTOR

452
AUTOMATIC FEEDER SYSTEM
DUAL 4 CHAIN AUTOMATIC FEEDER SYSTEM, 2 GEAR MOTOR DRIVES UNDER THE CYCLONE

453
DUST HOUSE
CARTER DAY 10' DUST HOUSE INCLUDES AIR LOCK

900-a
Hyster H360HD2 Forklift
S/N. J01E02115M. With side shift and fork positioner 12.00-20 front dual tires. And back tires. The same.

454
BLOWER
44" BLOWER, 50 HP MOTOR, CONTROLS ATTACHED

901
Taylor TE300M forklift
Taylor 30,000 pound forklift. EAGLE. With side shift, DUAL FRONT TIRES. 6 ft forks 12.00 20 NHS dual front tires. 70% 10.00-20 rear tires. One 40% one 0%

455
AUTOMATIC FEEDER SYSTEM
4 CHAIN TYPE AUTOMATIC FEEDER SYSTEM WITH 2 GEAR MOTOR DRIVES

456
(2) CYCLONES
(2) CYCLONES (LEFT SIDE) ON TOP OF SILO

457
(2) CYCLONES
(2) CYCLONES (RIGHT SIDE) ON TOP OF SILO

457A
*Royal Chip Bin*
*W/hyd unit, 14'x 16' , This a very nice bin,  Located at 4595 Jonathan Creek Rd, Waynesville, NC 28785

458
DUST PIPE
ALL DUST PIPE AT SILOS AND ON GROUND EXCLUDING ANY ON THE MAIN BUILDING. MOSTLY 15" DIAMETER

459
FUEL TANK AND PUMP
FUEL TANK AND PUMP IN BACK NEAR SILO

460
WASTE OIL TANK
WASTE OIL TANK NEAR SILOS

461
FORLIFT FORKS
42" FORKS BEHIND PLANT NEAR SILO

462
WASTE LOADING BIN
WASTE LOADING BIN, DUAL 10' AUGER SYSTEM TO INCLUDE BIN, AUGER, STAR LOADING SYSTEM

463
BLOWER
44" KOGER BLOWER

465

Taylor TE-300M forklift

500
ELECTRICAL
SQUARE D H-VL LOAD CURRENT INTERRUPTER SWITCH, NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

501
ELECTRICAL
SIEMENTS ELECTRIC PANEL AS MARKED W/ 400 AMP DISCONNECT, 200 AMP DISCONNECT (4) AMP DISCONNECT AND (1) CONTROL BOX NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

502
ELECTRICAL
SQUARE D 600 AMP DISCONNECT NEAR END OF DRYER NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

503
ELECTRICAL
MOTOR CONTROL PANEL TO INCLUDE RATIOTROL AC INVERTER ACE F SERIES NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

504
ELECTRICAL
SQUARE D TYPE 3, 2000 AMP MAIN DISCONNECT (SN: 333)/SQUARE D 2000 AMP DISCONNECT OUTSIDE OF OFFICE DOOR IN BUILDING NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

600
OFFICE- BOOK SHELF
WOODEN BOOK SHELF IN NURSES STATION

601
OFFICE- METAL CABINET
METAL CABINET IN NURSES STATION

602
OFFICE-SAFE
SAFE IN NURSES STATION

603
OFFICE- CHAIRS
3 CHAIRS IN NURSES STATION

604
OFFICE- TABLE, FILING CABINET
4' TABLE AND 5 DRAWER METAL HORIZONTAL FILING CABINET IN NURSES STATION

605
OFFICE-TABLE
KEURIG COFFEE MAKER AND 4' TABLE IN NURSES STATION

606
OFFICE - CHAIRS
2 WOODEN CHAIRS IN NURSES STATION

607
OFFICE- PRINTER/COPIER
BROTHER MFC-L2740DW COPIER/PRINTER (NOTE ATTACHED STATES: MAKES COPIES DOESN'T SCAN OR FAX. 3 BOXES OF TONER, EXTRA DRUM

608
OFFICE-SUPPLIES
MISC OFFICE SUPPLIES INCLUDES HP DESKJET 1000

609
OFFICE-MEDICAL SUPPLIES
MISC. MEDICAL SUPPLIES TO INCLUDE STRETCHER, CRUTCHES, HAZARD DISPOSAL BIN WITH RED DISPOSAL BAGS, AND MISC BANDAGES

610
OFFICE - CLEANING SUPPLIES
MISC CLEANING SUPPLIES, MOP BUCKET, CLEANING SUPPLIES

611
OFFICE- PING PONG TABLE
PING PONG TABLE

612
OFFICE CONFERENCE TABLE
9' CONFERENCE TABLE

613
OFFICE- HEARING TESTNG BOOTH
HEARING TESTING BOOTH

614
OFFICE 5 CHAIRS
5 BLACK LEATHER ROLLING CHAIRS WITH ARMS

615
OFFICE 2 CHAIRS
2 CREAM CLOTH HIGH BACK CHAIRS

616
OFFICE 2 CHAIRS
2 MAROON CLOTHER CHAIRS WITH WOODEN ARMS

617
OFFICE 2 END TABLES
2 WOODEN END TABLES WITH DRAWERS

619
OFFICE- OFFICE DECORE
OFFICE DECOR TO INCLUDE ART WORK AND PLANTS

620
OFFICE- 4 DRAWER SOFA TABLE
4 DRAWER SOFA TABLE IN ENTRANCE HALL

621
OFFICE- CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 CHAIRS, 3 ROLLING CABINETS, ENTERTAINMENT CENTER, DESK, CREDENZA, TABLE, 2 BOOK SHELVES

622
OFFICE- SAFETY EQUIPMENT
SAFTEY EQUIPMENT TO INCLUDED HARD HATS AND SIGNS

623
OFFICE- TAPE/ CONTAINER TIES
TAPE AND CONTAINER TIES

624
OFFICE- CONTENTS OF OFFICE
CONTENTS OF FIRST OFFICE IN HALL TO INCLUDE 2 CHAIRS, METAL FILING CABINET, 2 BOOK SHELVES AND DESK

625
OFFICE-CONTENTS OF OFFICE
CONTENTS OF 2ND OFFICE IN HALL TO INCLUDE OAK DESK, CREDENZA, BOOK SHELF, AND 3 CHAIRS

626
OFFICE- CONTENTS OF OFFICE
CONTENTS OF 3RD OFFICE IN HALL TO INCLUDE WOODEN DESK, AND 2 CHAIRS

627
OFFICE- CONTENTS OF OFFICE
CONTENTS OF LAST OFFICE IN HALL TO INCLUDE WOODEN DESK, WOODEN FILE CABINET, BOOK SHELF, AND 3 CHAIRS

900
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Self propelled Carrier  Serial # 11901. Transmission for carrier is disengaged and needs work. 
Machine has just over 3800 original hrs. with a new factory engine block installed with under 20 hours! Muffler will blow white smoke for a few minutes when first fired up due to muffler heater burning off old oil from previous block (per mechanic)
Nice clean, tight, smooth operating unit. This is a rare find!
 

902
HYSTER MODEL 300 FORKLIFT
HYSTER MODEL 300 30,000 LB CAPACITY FORKLIFT, 8' FORKS, SHOWING 2181 HOURS, MOTOTROL TRANSMISSION, SIDE SHIFT, SEE THROUGH MAST, HAS FORKS FOR LESS GROUND LEVEL, DUAL TIRES ON FRONT TIRES, MAYBE 40%, PERKINS DIESEL ENGINE, FULLY ENCLOSED CAB, 13'6" MAST

903
CATERPILLAR 174 MODEL DP80
CATERPILLAR 175 MODEL DP80, 17,500 LB CAPACITY FORKLIFT (SN: 132B-00030) 15,092 HOURS, SIDE SHIFT, SEE THROUGH MAST, 12'6" MAST, MITSUBISHI DIESEL ENGINE, 2 NEW BATTERIES, DUAL TIRES ON FRONT, 2 FRONT TIRES RIGHT & LFT 80% THE OTHER 4 TIRES 10%, 7' FORKS

904
LINDE MODEL H160 FORKLIFT
LINDE MODEL H160 16,000 KG CAPACITY FORKLIFT, 15,662 HOURS, 8' FORKS, SELF POSITIONING FORKS, PERKINS ENGINE, SEE THROUGH MAST, DUAL FRONT TIRES, FRONT TIRES 20%, REAR TIRES 80%. FULLY ENCLOSED CAB. WOULD NOT START PROBLEM UNKNOWN UPDATE: WE HIRED CARSON FORKLIFTS TO INSPECT THE LIFT. DUE TO COVID PARTS ARE 2-3 WEEKS OUT. WHAT HIS REPORT IS HE KNOWS THE HIGH PRESSURE FUEL LINES ARE CRAKED TO REPLACE COUPLE $100 FOR PARTS. NEXT STEP IF THAT DOES NOT FIX IS TO REPLACE INJECTORS NOW UP TO $2500 NEXT WOULD BE INJECTOR PUMP $6800. WHEN HE FORCED FUEL ENGINE HIT. HE SAID HE FEELS STRONGLY THAT THIS WOUKD FIX LIFT. I WILL BE GLAD TO GIVE BUYER MECHANICS CONTACT.

905
Toyota Forklift
Model 8FGCU25, 4000 LB Lift Capacity, 20,000 hours, 3 stage, LP, plumbed for side shift, OSHA certified, Well maintained clean machine. 

906
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK. Located at 8482 US 221 Marion, NC 28752

911
Hyster H330XL forklift does not run
S/N D019D01932S. No tires. Nice heavy 8’ forks Side shift and fork positioner. Cummins engine condition unknown. This lift will be sold at the Robbinsville NC site but is located and must be picked up from the Blackstone Va. location. 507 N West Ave, Blackstone,Va.

912
CAT V330C FORKLIFT
CAT V330C FORKLIFT (AT OLD BOILER SYSTEM) 33,000 LB CAPACITY, SIDE SHIFT, SEE THROUGH MAST, DUAL FRONT TIRES, (2,642 HRS) NO FORKS, CAT 208 ENGINE, WAS TOLD TO HAVE FUEL INJECTION ISSUES WILL NOT START FOUND FORKS AND HAVE PICTURE ADDED TO PHOTOS

913
2004 CHEVY VAN
2004 CHEVY ASTRO AWD VAN (VIN: 1GNEL19X14B124236) BACK SEATS ARE MISSING, A/C, CRUISE, AM/FM/CD PLAYER, UNKNOWN MILES, POWER LOCKS, FRONT TIRES: 60-70%, REAR 20%

914
*Fruehauf 40' Van Trailer*
*open top, No title

GALLEERY

915
Forks
skidloader forks, in good condition

IMG

136
* Box Fan
4'

137
* Box Fan
4'

138
* Box Fan
4'

139
* Pallet Roofing Paper
.

140
*Pine Insulation
(2) Pallets

141
*(2) Cylinders, Auger Piece & Belt
.

142
*Steel & Wood Table
(1) Pallet of

143
*Pallet Rack & Steel Rack
.

144
*4' x 8' Steel Table & Contents
Around Steel Frames & Poly Shield, Motor , Forklift tire, collector pipe, all lots numbered 145,145A,145B,146,148

147A
*Rolling pedistal fan
.

148A
*Drum & Steps
Drum dolly & portable steps

149
(4) Motors as Marked
125 HP & 7.5 HP

149A
*Rolling Supply Cart
.

150
*Bearings
.

150A
*Parts & componets
for spindless lathe lines

151
*Pump W/ Wand
.

151A
*Pallet of Misc.
(2) Pallets

152
*Chain
at Gem Pain Barrel

153
*Bolt Bin W/ Contents
.

153A
*Lumber Carts
(2) Lineberry lumber carts (one money)

154
*(2) Steel Saw Horses & Table
Against Wall

154A
*Skid of Firefighter Antifreeze
Firefighter GL48 antifreeze for wet fire sprinkle system

155
*(2) Rolls of Belting
.

155A
*Skate Roll Section
6 X 6 tilting skate roll section w/ 3 layer 4' wade skaterolls

156
*Pallet of Misc.
.

156A
*Skate Rolls
8' wide (3) tier (2) w/ skate rolls w/ possible dryer accessories

157
*Flat Racks
(18) 3' X 4 1/2 Flat Racks

158
*Skate Roll
5 1/2 X 24" Skate roll on 4' legs

159
*Tilting Stand
8' Tilting skate roll stand

160
*Barrel Stand
Gravity flow barrel stand on wheels

160A
*Pallet Jack
5500 # pallet jack

161
*Cart w/ end rails
3' X 5'

162
*Double Door Cabinet
Steel cabinet

163
*Slotted Racks
(3) Slotted raccks 5' X 6' w/ 2' bays, all for one money

164
*Steel table
6' X4' X 4' high Steel table w/ contents

165
*Maitenance Platform
.

166
*(3) Pallets Misc.
1 pallet chain, 1 pallet of wood, 1 pallet w/ 2 boxes of roll, elec. wire & box

167
*Gear Reducers
Pallet of gear reducers (Gear Motors) (2) right angle (1) Straight

168
*Roll Wide Belt
18"

169
*(3) Motors
(1) 7.5 hp 885 RPM (1) 15 hp RPM unknown (1) 10 hp 1175 RPM

170
*(4) Motors
7.5 hp some good, some bad

171
*(3) motors
7.5 hp condition unknown

172
*Kiln Fan Motors
Condition unknown

173
*(2) HYD Cylinders
Huge

174
*Steam Valve Fitting
.

175
*(3) Carts
(1) Lineberry not complete (2) stationary

176
*Rolling Cart
3' X 5'

177
*(2) Pallets Contents
Hard Hats & (2) Drawer File

178
*Wooden Cabinet
W/ Casters

178A
*Acetylene Hose, Misc.
(2) Pallets, Huge Cable Grip, Misc. Steel Conduit

179
* Belt Conveyor
17' ERSI Conveyor W/ Motor & Control, 27" Wide

180
*Belt Conveyor
12' x 27" W/ Motor & Control, Stops & Air Kick Off

180A
*Approx. (14) Steel Plates
4' x 8' x 1/4"

180B
*Misc. Steel & Rebar
.

180C
*Pipe and Steam Pipe
at Exit Door Along Front Wall of Buildings

181
*Score Saw Arbors
W/ Saws

182
*Blower
Twin City Fan Size 917 W/ 20 HP Motor & Control

183
*Enclosed Blower
W/ 15-20 HP Motor

184
*Blower
Unknown, 15-20 HP Motor

185
*15 HP Hydraulic Power Pack
.

186
*Motor Controls
Engineered Control Systems

187
*Baldor 10 HP Motor
You name it it's there

188
*Chop Saw
Copco Carriage Type W/ Roller Conveyor

188A
*Koger Blower
No Motor

190
*Steel Work Table
.

191
*Blower
W/ 7.5 HP Motor

192
Shredder
Horizontal Feed, Bottom Discharge

193
30,000 lb SCISSOR LIFT
6'X8' WITH WELDED ON STEEL FRAME THAT IS 8'X18'

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Oak Valley Hardwoods, Inc- Robbinsville

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
68 SNOWBIRD ROAD
ROBBINSVILLE, NC 28771
Sale Dates and Times
Friday Aug 28, 2020 Completed
Sale Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Winning bidders have 30 days to remove the larger equipment.

Winning bidders of boiler and buildings have 120 days to remove. 

Rigging is the responsibility of the buyer and all riggers will need to be properly insured.

Rigging and load-out may be scheduled by calling Zach Kittrell at 931.224.0699.

00
Information Lot
Auction is set to start at 10:00 Am EST, we will follow the online catalog in order, we plan to sell the rolling stock at 2:00 PM regardless of where we are in the catalog order. 

100
*All Steel Bin
4' x 6', 46" deep

100A
*All Steel Bin
4' x 6', 46" deep

100B
*All Steel Bin
4' x 6', 46" deep

101
*Baker's Brother Waste Equipment
6' x 6' x 6', (8) cy dumpster

102
*5 HP Hydraulic Pack
and box w/ steel & wire

103
*Control Station
for spindle less lathe

104
*H-78 Chain
entire pallet

104A
*Shark Bite Pex Line
(2) New Rolls 1/2”x300’ shark Bite pex water line

105
*81X Lug Chain
(1) Rolls on Pallet

107
*NEW H-78 RT Chain
(2) Huge Packed Stacks

108
*Electric Motors
7.5 HP, (2) 5 HP, 2 HP, 1 HP, Nema 0 Starter and Motor Brackets

109
*Bearings & Sprockets
Pillow Block Approx. # (6) 2", (2) 3 7/16", (4) 1 7/16", (1) 2 1/4" Type, (3) 1 15/16"-2", Double Drive Sprockets, Chain Sprockets

110
*Drives & Motors
(2) Toshiba 3 HP, (1) Tea Xinlian Reduction Drive, (2) Right Angle Reduction Drives & (2) 24" W x 10" Hourglass Rolls

111
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

112
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

113
*10 HP Motor
880 RPM 230/460 V 284 T Frame

114
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

115
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

116
*10 HP Kiln Fan Motor
SII

117
*Barrel Dolly
.

118
*Charger Booster
Fleet

119
*Floor Vacuum
Elgee

120
*Grill
Pretty Nice

121
*Breakers & Conduit Fittings
Schneider 60 AMP, Electrical Conduit Fittings

122
*Lot of Chairs
.

123
*Misc. Steel, Drives, Etc.
Misc. Steel at Log Entry Building Door, Step Ladder Drives Motors, Light Plant Plywood w/ I-Beam, Sprockets & Bearings

125
*6 HP Shop Vac
Craftsman 16 Gallon

126
*(2) Roller Chain Conveyors
6' x 23" w/ HD 140 RC Chain

127
*Belt Conveyor Section
w/ 1 HP Motor

128
*1 HP Motor
for Lathe Conveyors (Spare)

128A
*1 HP Motor
for Lathe Conveyors (Spare)

128B
*1 HP Motor
for Lathe Conveyors (Spare)

128C
*1 HP Motor
for Lathe Conveyors (Spare)

129
*Stacking Rack
Veneer Core or Dimension (to right of lathes)

130
*Maintenance Room and Parts
for Lathe Lines Includes All Shelves, Cabinets Outside Room as Marked and OSHA Rail NOT Installed, Yellow Steel Outside Room, Green 5 x 6 1/2' Cabinet, Misc. Steel Along Wall to the Far Right

131
*Crossover Stairs
.

132
(2) Roller Chain Conveyors
6', Steel Plate

133
*Steel Work Table, Contents
4' x 8', Includes Roller Chain & Contents

134
* Pedestal Fan
3'

200
TREE LENGTH LOG DECK
25' 4 STRAND TREE LENGTH LOG DECK, 24' WIDE HAS 2 INDEPENDENT DRIVE; H78 CHAIN, AND STOP AND LOADER SYSTEM, SUPPORTS TO THE GROUND

201
ENDWISE LOG TROUGH
40' ENDWISE LOG TROUGH, 110 LADDER BACK CHAIN, HYDARULIC DRIVE; STEEL SUPORTS TO GROUND, CHAIN WILL NEED REPLACED BEFORE LONG.

202
BREWCO SLASHER SAW
BREWCO SLASHER SAW 60" INSERTED TOOTH SAW, CLIMATE CONTROL CAB AND CONTROLS, 40 HP ELECTRIC MOTOR, 2 HYDRAULIC OPERATED LOG HOLD DOWNS ON INFEED; 2 HYSTRAULIC OPERATED LOG HOLD DOWNS ON OUTFEED, INCLUDES 12' OUTFEED ENDWISE LOG TROUGH WITH 110 LADDER BACK CHAIN AND TWO KICKERS. HYDRAULIC DRIVE, NO HYDRAULIC SUPPLY.

202a
6'X8' REJECT LOG TABLE

202B
15'X12" WASTE CONVEYOR; GEAR MOTOR DRIVE

202C
10 HP HYDRAULIC SUPPLY UNIT

203
CATWALK SECTION
4'X20' CATWALK SECTION AT MERCHANDISING SYSTEM

204
TIE BACK OF 200-203 WITH 10% RAISE
TIE BACK OF LOTS 200-203 WITH A 10% RAISE

205
HOURGLASS ENDWISE LOG TROUGH
38' HOURGLASS ENDWISE LOG TROUGH WITH (27) 20" WIDE HOURGLASS ROLLS, NO HYDRAULIC SUPPLY, HYDRAULIC DRIVE, STEEL SUPPORTS TO THE GROUND

206
LOG KICKER SYSTEM
4' LOG KICKER SYSTEM. HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM. NO HYDRAULIC SUPPLY. STEEL SUPPORTS TO THE GROUND

207
ENDWISE LOG CONVEYOR
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

208
LOG KICKER SYSTEM
4' LOG KICK SYSTEM, HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM, NO HYDRAULIC SUPPLY, STEEL SUPPORTS TO THE GROUND

209
ENDWISE LOG TROUGH
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

210
ROLLCASE
11' ROLLCASE HYDRAULIC LIFT LOG KICKERS, 48" LOGS

211
HYDRAULIC PACK
15 HP HYDRAULIC PACK

212
TIE BACK OF 205-210 WITH 10% RAISE
TIE BACK OF LOTS 205-210 WITH 10% RAISE

213
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

214
HAUL UP LOG DECK
7'X3' 3 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

264

215
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

216
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

217
VENEER BACK PEELER
SPINDLELESS 4' VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

218
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

219
TIE BACK LOTS 213-218 WITH 10% RAISE
TIE BACK OF LOTS 213-218 WITH A 10% RAISE

220
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

221
HAUL UP LOG DECK
7'X3' 2 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

222
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

223
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

224
VENEER BACK PEELER
SPINDLELESS 4’ VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

225
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

226
TIE BACK LOTS 220-225 WITH 10% RAISE
TIE BACK OF LOTS 220-225 WITH A 10% RAISE

227
HYDRAULIC PACK
15 HP HYDRAULIC PACK

228
LOG DECK
48'X8' 4 STRAND LOG DECK WITH H78 CHAIN WITH HJYDRAULIC DRIVE, NO HYDRAULIC SUPPLY

229
HAUL UP LOG DECK
7'X8' HAUL UP DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

230
LOG DEBARKER
8' ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

231
ENDWISE LOG TROUGH
10' ENDWISE LOG TROUGH (5) 20"X10" HOURGLASS ROLLS

232
VENEER BACK PEELER
SPINDLELESS 8’ VENEER BACK PEELER (105") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

233
XUANJIN MACHINE CO. LTD VENEER STACKER
XAUNJIN MACHINE CO. LTD VENEER STACKER (9'X5') TO INCLUDE 22' INFEED BELT SYSTEM COMPLETELY SELF CONTAINED, CONTROLS ATTACHED

234
HYDRAULIC PACK
20 HP HYDRAULIC PACK

235
TIE BACK OF 228-234 WITH 10% RAISE
TIE BACK OF LOTS 228-234 WITH A 10% RAISE

236
BELT CONVEYOR
65' BELT CONVEYOR WITH 24" CLEATED BELT, GEAR REDUCTION DRIVE

237
BELT CONVEYOR
55' BELT CONVEYOR WITH 18" BELT, GEAR REDUCTION DRIVE

238
CATWALK SECTION
(2) CATWALK SECTIONS AT DEBARKER

239
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239A
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239B
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

240
HIGH PRECISION MACHINE TOOL KNIFE GRINDER
HIGH PRECISION MACHINE TOOL KNIFE GRINDER HAS (2) 52"X7" MAGNETIC HOLDING PLATES, OVERALL WIDTH 162", SELF CONTAINED MOTOR CONTROLS

241
SPARE KNIVES FOR PEELER
(2) 106" SPARE KNIVES FOR PEELER

242
SPARE KNIVES FOR PEELER
(2) 59" SPARE KNIVES FOR PEELER

243
ELECTRIC PANEL
ELECTRIC PANEL TO INCLUDE 300 AMP DISCONNECT, (2) SIZE 4 STARTERS, (2) WEG SOFT START SSW-03 PLUS, MISC CUT OFFS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

244
DISCONNECT
SQUARE D 800 AMP DISCONNECT. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245
CONTROL PANEL
CONTROL PANEL TO INCLUDE (5) 30 AMP DISCONNECTS, (5) SIZE 2 STARTERS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245A
(2) MOTOR CONTROL PANELS FOR WEIMA SLOW SPEED GRINDER

246
VENEER DRYER
4 TRAY VENEER DRYER, CONTROLS, INCLUDES INFEED LOADING SYSTEM; OUTFEED BELT CONVEYOR, STEAM PIPE TO FIRST CUT OFF AT MAIN PIPE SYSTEM. BLOW PIPE TO ROOF ONLY
 

246A
Lumber cart
8’x4’ STEEL LUMBER CART

246B
LUMBER CART
4x8’ STEEL LUMBER CART

246C
LUMBER CART
4’x8’ STEEL LUMBER CARR

246D
LUMBER CART
4’x8’ STEEL LUMBER CART

246E
STEEL PEDALSTAL
55”x110” x 11”  ALL ONE MONEY

247
VENEER DEFECT MACHINE

248
VENEER DEFECT MACHINE

249
VENEER DEFECT MACHINE

329
GARDNER DENVER AIR COMPRESSOR
GARDNER DENVER 10 HP TANK MOUNT AIR COMPRESSOR WITH CONTROLS AS MARKED

330
GENERAL PHEUMATICS REFRIGERATED COMPRESSED AIR DRYER
GENERAL PNEUMATICS REFREGERATED COMPRESSED AIR DRYER, (MODEL TKF1000A), CUT OFF CONTROLS ATTACHED

255
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER, NEW! NEVER INSTALLED!!

256
HESHAN JIE DING MACHINERY COMPANY AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 4' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

262
HESHAN JIE DING MACHINERY COMPANY8' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 8' DOUBLE SIDED GLUE SPREADER NEW! NEVER INSTALLED!!

263
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

266
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE)
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE) NEW! NEVER INSTALLED!!

267
HENSHAN JIE DING COLD PRESS MACHINE (SPLIT TYPE)

272
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED)
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED) NEW!

273
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR NEW! NEVER INSTALLED!!

275
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER NEW! NEVER INSTALLED!!

276
HESHAN JIE DING MACHINERY COMPANY FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE
HESHAW JIE DING MACHINE COMPANY 4' FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE NEW! NEVER INSTALLED!!

277
HESHAN JIE DING MACHINERY COMPANY 8' TRIM SAW MACHINE
HESHAN JIE DING MACHINERY COMPANY 8' FULLY AUTOMATIC ROLLER TRIM SAW MACHINE NEW! NEVER INSTALLED!!

280
*COMPLETE VENEER TO PLYWOOD LINE*
LOTS 255,256,262,263,266,267,272,273,275,276,277 AS AN ENTIRETY WITH A 10% RAISE TO ALSO INCLUDE ALL TRANSFER EQUIPMENT, ELECTRICAL AND PARTS 

285
SUPER SOUND 2 HEAD SANDING MACHINE
MMNH5613DR SUPER SOUND 2 HEAD 56” WIDE SANDING MACHINE NEW! NEVER INSTALLED!!

300
LUMBER BREAK DOWN SYSTEM
LUMBER BREAK DOWN SYSTEM TO INCLUDE 25'X11' 4 STRAND PACKAGE DECK, TULSA WENCH GEAR REDUCTION DRIVE; 3 ARM, 7 ' BREAK DOWN CHAIN LIFT WITH TULSA WINCH DRIVE, 10' X11' LUMBER TRANSFER DECK, 81X CHAIN; 25' STICK REMOVAL CONVEYOR WITH 10" BELT DRIVE, NO MOTOR CONTROLS

345A

301
BELT CONVEYOR

302
CONTROL STATION CONTROLS

303
LUMBER DECK
16' X11' 4 STRAND LUMBER DECK WITH C55B ROOF TOP CHAIN, MOTOR REDUCTION DRIVE

304
HMC DOUBLE END TRIMMER
HMC 16' DOUBLE END TRIMMER MODEL ET10 (SN: 347-98), 24" SAWBLADES

305
BELT CONVEYOR
22' BELT CONVEYOR WITH 20" BELT UNDER TRIMMER

306
BELT CONVEYOR
10' BELT CONVEYOR 28" BLET GEAR MOTOR DRIVE FROM TRIMMER

307
GREEN CHAIN DECK
70'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN WITH TAIL SPROCKET SHAFT, GEAR MOTOR DRIVE

308
GREEN CHAIN DECK
73'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN, GEAR REDUCTION DRIVE, NO HEAD SHAFT, 36" LUMBER PULL ROLLS

309
TIE BACK LOTS 300-308 WITH 10% RAISE
TIE BACK OF LOTS 300-308 WITH A 10% RAISE

310
LUMBER CART
15'X52" LUMBER CART

310A
LUMBER CART
15'X52" LUMBER CART

310B
LUMBER CART
16'X52" LUMBER CART

310C
LUMBER CART
15'X52" LUMBER CART

310D
LUMBER CART
15'X52" LUMBER CART NO WHEELS

310E
LUMBER CART
15'X52" LUMBER CART

311
LUMBER CART
14'X40" LUMBER CART

311A
LUMBER CART
14'X40" LUMBER CART

311B
LUMBER CART
14'X40" LUMBER CART

311C
LUMBER CART
14'X40" LUMBER CART

311D
LUMBER CART
14'X40" LUMBER CART

311E
LUMBER CART
14'X40" LUMBER CART

311F
LUMBER CART
14'X40" LUMBER CART

311G
LUMBER CART
14'X40" LUMBER CART

311H
LUMBER CART
14'X40" LUMBER CART

311I
LUMBER CART
14'X40" LUMBER CART

312
CONTROL CENTER
CONTROL CENTER UNDER BREAK DOWN SYSTEM

313
DISCONNECT
200 AMP SQ. D DISCONNECT

325
MEREEN JOHNSON MULTI GANG RIP SAW
MEREEN JOHNSON 3300 DCS MULTI GAND RIP SAW (SN: MJ5688) WITH SLANT BED FEED SYSTEM (5282 HOURS), ELECTRICAL CONTROLS ATTACHED

326
SPARE ARBORS SAWS AND SPACERS
SPARE ARBOR SAWS AND SPACERS

327
MATTISON 404 RIP SAW
MATTISON 404 RIP SAW (MODEL: 3J1934M004), 20 HP MOTOR, TYPE: CMP45

328
BLACK AND DECKER MAGNETIC DRILL PRESS
BLACK AND DECK 3/4" MAGNETIC DRILL PRESS (SN: 3060154)

331
DISCONNECT
SQ. D 200 AMP DISCONNECT

332
DRY KILN #1,CONTROLS AND DOOR
DRY KILN #1, CONTROLS, DOOR

333
DRY KILN #2, CONTROLS AND DOOR
DRY KILN #2, CONTROLS, DOOR

334
DRY KILN #3, CONTROLS AND DOOR
DRY KILN #3, CONTROLS, DOOR

335
DRY KILN #4, CONTROLS AND DOOR
DRY KILN #4, CONTROLS, DOOR

336
DRY KILN #5, CONTROLS AND DOOR
DRY KILN #5, CONTROLS, DOOR

337
DRY KILN #6, CONTROLS AND DOOR
DRY KILN #6, CONTROLS, DOOR

338
DRY KILN #7, CONTROLS AND DOOR
DRY KILN #7, CONTRLOLS, DOOR

339
DRY KILN # 8, CONTROLS AND DOOR
DRY KILN #8, CONTROLS, DOOR

340
DRY KILN #9, CONTROLS AND DOOR
DRY KILN #9, CONTROLS, DOOR

341
SAMPLE OVEN

342
HURST WASTE FIRE BOILER
HURST 400 HP HYBRID WASTE FIRE BOILER, CONTROLS, AUTOMATIC FEED SYSTEM (SN: HYB2925/150) (BUILT: 1999 JOB #110) HURST MOVED AND SET THIS BOILER UP FOR OAK VALLEY HARDWOODS. HURST CHECKED IT OUT AND IT IS IN A-1 CONDITION!

343
INDUSTRIAL BOILER SYSTEM
LIKE NEW INDUSTRIAL BOLER SYSTEM, RAM TYPE FEEDER INCLUDES CONTROLS AS MARKED, 15 HP MOTOR (WAS INSTALLED NEW BY HURST WHEN BOILER SYSTEM WAS PUT IN)

344
VIBRATING CONVEYOR
25'X20" VIBRATING CONVEYOR WITH 7" SIDES

346
LARGE QUANITY OF PROCESSED AND DRIED VENEER
LARGE QUANITY OF PROCESSED AND DRIED VENEER, INCLUDES ALL VENEER ONSITE

347
7' STACKING STICKS

348
4X4 BUNK DIVIDERS

4X4 BUNK DIVIDERS

349
CORES

350
DIP TANK
10'8"X20'2"X6'4" LUMBER DIP TANK WITH COMPLETE HYDRAULIC SYSTEM

351
IRVINGTON MOORE PACKAGE DECK
29'X14' IRVINGTON MOORE 4 STRAND PACKAGE DECK (1) NEW STRAND IS ON GROUND TO BE PUT ON, RUFNER 10 HP GEAR REDUCTION DRIVE

352
IRVINGTON MOORE HAUL UP DECK
11'X14' IRVINGTON MOORE 4 STRAND HAUL UP DECK, GEAR REDUCTION DRIVE, STEEL SUPPORT TO GROUND

353
IRVINGTON MOORE UNSCRAMBLER
5' IRVINGTON MOORE PADDLE TYPE UNSCRAMBLER WITH EVENENDER ROLLS, STEEL SUPPORTS TO THE GROUND

354
IRVINGTON MOORE GRADING STATION
IRVINGTON MOORE GRADING STATION WITH 11' 6 STRAND DECK, H78B ROOF TOP CHAIN, SLAT EVENENDER DEVICE, GRADING TABLE, 2 WAY SORT SYSTEM AND PUSH BUTTON CONTROLS

355
IRVINGTON MOORE REJECT BOARD CONVEYOR
IRVINGTON MOORE 20' REJECT BOARD CONVEYOR WITH 24" BELT UNDER GRADING STATION

356
IRVINGTON MOORE LUMBER DECK
IRVINGTON MOORE 32'X12' 4 STRAND LUMBER DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

357
IRVINGTON MOORE LUMBER STACKER
IRVINGTON MOORE 7' 4 ARM CHAIN TYPE LUMBER STACKER TO INCLUDE STICK PLACING STATION, LUMBER ELEVATED ROLL CASE,HYDRAULIC PACK, ALL DRIVES AND CONTROLS AS MARKED

358
ROLLCASE
55' ROLL CASE WITH (21) 88" ROLLS, 2 ARE INDEPENDENTLY POWERED WITH GEAR REDUCTION DRIVES

359
STICK DECK
45' 3 STRAND STICK DECK WITH DRIVE

360
TIE BACK LOTS 351-359 WITH 10% RAISE
TIE BACK OF LOTS 351-359 WITH A 10% RAISE

361
FIRE POOF CABINET
43"X65" FIRE PROOF CABINET

362
(4) PEDESTAL FANS

362A
(2) CONVEX MIRRORS
(2) CONVEX MIRRORS
 

363
HANGING BOX FAN
3'X3' HANGING BOX FAN

364
JACKSON & CHURCH WASTE OIL BURNING FLEX AIR FURNACE
JACKSON & CHURCH FLEX AIR FURNACE WASTE OIL BURNING, INCLUDES TANK OUTSIDE

365
ROLL AROUND LADDER
4 STEP 3' ROLL AROUND LADDER

366
PALLET JACK
5500 LB. PALLET JACK, 20" WIDE

367
WOOD CRATE AND CONTENTS

368
VERTICAL BARREL DOLLY

369
HORIZONTAL BARREL DOLLY

370
CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 DESK, 6 CHAIRS, REFRIGERATOR, FILE CABINET, MICROWAVE, SAMSUNG WALL AIR CONDITIONER

371
WASTE BIN
4'X4'X4' WASTE BIN

372
B-23934 SPROCKETS
(9) B-23934 SPROCKETS

373
METAL CABINET WITH CONTENTS

374
METAL CABINET WITH CONTENTS

375
LADDER
(2) LADDERS

376
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE/ (1) OUTSIDE MAIN OFFICE
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE (1) OUTSIDE MAIN OFFICE

377
BUILDING
40'X150' PREFAB METAL BUILDING WITH 20' SIDES, 3 ROLL UP DOORS, 2 WALK IN DOORS

377A
ELECTRIC PANEL
ELECTRIC PANEL AS MARKED TO INCLUDE (2) 200 AMP DISCONNECTS, (3) 100 AMP DISCONNECTS (2) MISC ELECTRICAL BOXES, )1) BREAKER BOX (1) 37.5 KVA TRANSFORMER

377B
SPRINKLER SYSTEM AT STACKER

378
FUEL TANK
FUEL TANK OUTSIDE OF GRADING STATION BUILDING

380
*30’x30’ shop building
* ALL STEEL SHOP BUILDING 30’x30’x20’ EVE 20’x20’ ROLLUP DOOR 2- WALK IN DOORS.

381
CONCRETE LUMBER BUNK
ALL CONCRETE LUMBER BUNKS ON YARD

382
CONTAINER LOADING RAMP

505

383
LUMBER BUNK TOPPERS

384
ALL LOGS ON LOG YARD

385
CONVEYOR
3 STRAND-4 ARM STOP AND LOADER WITH 10' ROLLER CHAIN, NO DRIVE

618
OFFICE- STORAGE DRAWER
3 DRAWER WOODEN STORAGE UNIT

386
LOG LOADER
18' - 6 STRAND LOG LOADER WITH GEAR MOTOR DRIVE- 2 STRANDS NOT ATTACHED

387
TRANSFER DECK
(3) 5' TRANSFER DECKS

388
LOG TROUGH
22' ENDWISE LOG TROUGH 10" 110 LADDER BACK CHAIN/HYDRAULIC DRIVE

389
CATWALK AN MISC STEEL
CATWALK AND MISC STEEL AS MARKED

390
LOG TROUGH
15' ENDWISE LOG TROUGH DUAL H78 CHAIN, GEAR REDUCTION DRIVE

391
LOG TROUGH
3 SECTIONS OF 30' ENDWISE LOG TROUGH, NO CHAIN, GEAR REDUCTIONS DRIVE

392
TIME SAVER 3 HEAD SANDER
TIME SAVER 3 HEAD SANDER, MODEL 852-6CR (SN: 19349) 52" width Capacity, 13" Loading Space, Cross Belt 25hp 230/460 3phase, Platen Head with sensing 25hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Cross belt stroke sander 20hp 230/460 3 phase, Panel cleaning Brush, Hydraulic motor/ tank assembly 15 hp, 230/460v 3 phase, Vacuum feed belt, Hydraulic variable speed feed, Lenze Smvector AC tech drive controller, Vacuum assembly, Free standing operator control console S/N 19340, Please Note: the Doucet BTWB3-48 Outfeed Motorized Roller Conveyor IS NOT INCLUDED in this lot. Sander shows some rust from being placed outside, but is in good working condition.

392A
*Multi-Rip Saw*
2nd Industrial Wood Working Machine, 30" Cap, with 8 sawblade Capacity, Good Working Condition

393
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP CHARGE, MISSING COVER, NO MOTOR

394
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP DSICHARGE (SN: F1.F1L.1101) 75 HP MOTOR

395
BELT CONVEYOR
12' X24" BELT CONVEYOR THAT FED GRINDER, GEAR MOTOR DRIVE

396
BELT CONVEYOR
21'X18" BELT CONVEYOR WITH GEAR MOTOR DRIVE

397
PEEL AND STICK ROOFING
PALLET OF LIBERTY SBS SELF ADHERING "PEEL AND STICK" ROOFING (18) PALLET WITH 12 BOXES, (1) PALLET WITH 10 BOXES 100 FEET PER BOX COLOR: BLACK

398
AIR COMPRESSOR
GARDNER DENVER 200 HP ELECTRA SCREW TYPE AIR COMPRESSOR. MODEL EDP99C, (SN: S062586)

399
AIR COMPRESSOR
SULAIR LS-25 20 HP SCREW TYPE AIRCOMPRESSOR, (HOURS: 5685)

400
AIR DRYING SYSTEM
2009 PNEUMATECH AIR DRYING SYSTEM: TYPE: AD1250

401
METAL SHELF AND CONTENTS IN BACK OF BUILDING

402
METAL SHELF AND CONTENTS IN BACK OF BUILDING

403
METAL SHELF AND CONTENTS IN BACK OF BUILDING

404
METAL SHELF AND CONTENTS IN BACK OF BUILDING

405
CONTENTS OF ROOM NOT ALREADY SOLD

406
CONTENTS OF ROOM
CONTENTS OF ROOM IN BACK OF BUILDING

450
BLOWER
CAROLINA MODEL 40" BLOWER, 40 HP MOTOR CONTROLS ATTACHED

451
KOGER BLOWER MODEL CW0360
KOGER BLOWER MODEL CW-60 WITH 40 HP MOTOR

452
AUTOMATIC FEEDER SYSTEM
DUAL 4 CHAIN AUTOMATIC FEEDER SYSTEM, 2 GEAR MOTOR DRIVES UNDER THE CYCLONE

453
DUST HOUSE
CARTER DAY 10' DUST HOUSE INCLUDES AIR LOCK

900-a
Hyster H360HD2 Forklift
S/N. J01E02115M. With side shift and fork positioner 12.00-20 front dual tires. And back tires. The same.

454
BLOWER
44" BLOWER, 50 HP MOTOR, CONTROLS ATTACHED

901
Taylor TE300M forklift
Taylor 30,000 pound forklift. EAGLE. With side shift, DUAL FRONT TIRES. 6 ft forks 12.00 20 NHS dual front tires. 70% 10.00-20 rear tires. One 40% one 0%

455
AUTOMATIC FEEDER SYSTEM
4 CHAIN TYPE AUTOMATIC FEEDER SYSTEM WITH 2 GEAR MOTOR DRIVES

456
(2) CYCLONES
(2) CYCLONES (LEFT SIDE) ON TOP OF SILO

457
(2) CYCLONES
(2) CYCLONES (RIGHT SIDE) ON TOP OF SILO

457A
*Royal Chip Bin*
*W/hyd unit, 14'x 16' , This a very nice bin,  Located at 4595 Jonathan Creek Rd, Waynesville, NC 28785

458
DUST PIPE
ALL DUST PIPE AT SILOS AND ON GROUND EXCLUDING ANY ON THE MAIN BUILDING. MOSTLY 15" DIAMETER

459
FUEL TANK AND PUMP
FUEL TANK AND PUMP IN BACK NEAR SILO

460
WASTE OIL TANK
WASTE OIL TANK NEAR SILOS

461
FORLIFT FORKS
42" FORKS BEHIND PLANT NEAR SILO

462
WASTE LOADING BIN
WASTE LOADING BIN, DUAL 10' AUGER SYSTEM TO INCLUDE BIN, AUGER, STAR LOADING SYSTEM

463
BLOWER
44" KOGER BLOWER

465

Taylor TE-300M forklift

500
ELECTRICAL
SQUARE D H-VL LOAD CURRENT INTERRUPTER SWITCH, NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

501
ELECTRICAL
SIEMENTS ELECTRIC PANEL AS MARKED W/ 400 AMP DISCONNECT, 200 AMP DISCONNECT (4) AMP DISCONNECT AND (1) CONTROL BOX NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

502
ELECTRICAL
SQUARE D 600 AMP DISCONNECT NEAR END OF DRYER NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

503
ELECTRICAL
MOTOR CONTROL PANEL TO INCLUDE RATIOTROL AC INVERTER ACE F SERIES NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

504
ELECTRICAL
SQUARE D TYPE 3, 2000 AMP MAIN DISCONNECT (SN: 333)/SQUARE D 2000 AMP DISCONNECT OUTSIDE OF OFFICE DOOR IN BUILDING NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

600
OFFICE- BOOK SHELF
WOODEN BOOK SHELF IN NURSES STATION

601
OFFICE- METAL CABINET
METAL CABINET IN NURSES STATION

602
OFFICE-SAFE
SAFE IN NURSES STATION

603
OFFICE- CHAIRS
3 CHAIRS IN NURSES STATION

604
OFFICE- TABLE, FILING CABINET
4' TABLE AND 5 DRAWER METAL HORIZONTAL FILING CABINET IN NURSES STATION

605
OFFICE-TABLE
KEURIG COFFEE MAKER AND 4' TABLE IN NURSES STATION

606
OFFICE - CHAIRS
2 WOODEN CHAIRS IN NURSES STATION

607
OFFICE- PRINTER/COPIER
BROTHER MFC-L2740DW COPIER/PRINTER (NOTE ATTACHED STATES: MAKES COPIES DOESN'T SCAN OR FAX. 3 BOXES OF TONER, EXTRA DRUM

608
OFFICE-SUPPLIES
MISC OFFICE SUPPLIES INCLUDES HP DESKJET 1000

609
OFFICE-MEDICAL SUPPLIES
MISC. MEDICAL SUPPLIES TO INCLUDE STRETCHER, CRUTCHES, HAZARD DISPOSAL BIN WITH RED DISPOSAL BAGS, AND MISC BANDAGES

610
OFFICE - CLEANING SUPPLIES
MISC CLEANING SUPPLIES, MOP BUCKET, CLEANING SUPPLIES

611
OFFICE- PING PONG TABLE
PING PONG TABLE

612
OFFICE CONFERENCE TABLE
9' CONFERENCE TABLE

613
OFFICE- HEARING TESTNG BOOTH
HEARING TESTING BOOTH

614
OFFICE 5 CHAIRS
5 BLACK LEATHER ROLLING CHAIRS WITH ARMS

615
OFFICE 2 CHAIRS
2 CREAM CLOTH HIGH BACK CHAIRS

616
OFFICE 2 CHAIRS
2 MAROON CLOTHER CHAIRS WITH WOODEN ARMS

617
OFFICE 2 END TABLES
2 WOODEN END TABLES WITH DRAWERS

619
OFFICE- OFFICE DECORE
OFFICE DECOR TO INCLUDE ART WORK AND PLANTS

620
OFFICE- 4 DRAWER SOFA TABLE
4 DRAWER SOFA TABLE IN ENTRANCE HALL

621
OFFICE- CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 CHAIRS, 3 ROLLING CABINETS, ENTERTAINMENT CENTER, DESK, CREDENZA, TABLE, 2 BOOK SHELVES

622
OFFICE- SAFETY EQUIPMENT
SAFTEY EQUIPMENT TO INCLUDED HARD HATS AND SIGNS

623
OFFICE- TAPE/ CONTAINER TIES
TAPE AND CONTAINER TIES

624
OFFICE- CONTENTS OF OFFICE
CONTENTS OF FIRST OFFICE IN HALL TO INCLUDE 2 CHAIRS, METAL FILING CABINET, 2 BOOK SHELVES AND DESK

625
OFFICE-CONTENTS OF OFFICE
CONTENTS OF 2ND OFFICE IN HALL TO INCLUDE OAK DESK, CREDENZA, BOOK SHELF, AND 3 CHAIRS

626
OFFICE- CONTENTS OF OFFICE
CONTENTS OF 3RD OFFICE IN HALL TO INCLUDE WOODEN DESK, AND 2 CHAIRS

627
OFFICE- CONTENTS OF OFFICE
CONTENTS OF LAST OFFICE IN HALL TO INCLUDE WOODEN DESK, WOODEN FILE CABINET, BOOK SHELF, AND 3 CHAIRS

900
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Self propelled Carrier  Serial # 11901. Transmission for carrier is disengaged and needs work. 
Machine has just over 3800 original hrs. with a new factory engine block installed with under 20 hours! Muffler will blow white smoke for a few minutes when first fired up due to muffler heater burning off old oil from previous block (per mechanic)
Nice clean, tight, smooth operating unit. This is a rare find!
 

902
HYSTER MODEL 300 FORKLIFT
HYSTER MODEL 300 30,000 LB CAPACITY FORKLIFT, 8' FORKS, SHOWING 2181 HOURS, MOTOTROL TRANSMISSION, SIDE SHIFT, SEE THROUGH MAST, HAS FORKS FOR LESS GROUND LEVEL, DUAL TIRES ON FRONT TIRES, MAYBE 40%, PERKINS DIESEL ENGINE, FULLY ENCLOSED CAB, 13'6" MAST

903
CATERPILLAR 174 MODEL DP80
CATERPILLAR 175 MODEL DP80, 17,500 LB CAPACITY FORKLIFT (SN: 132B-00030) 15,092 HOURS, SIDE SHIFT, SEE THROUGH MAST, 12'6" MAST, MITSUBISHI DIESEL ENGINE, 2 NEW BATTERIES, DUAL TIRES ON FRONT, 2 FRONT TIRES RIGHT & LFT 80% THE OTHER 4 TIRES 10%, 7' FORKS

904
LINDE MODEL H160 FORKLIFT
LINDE MODEL H160 16,000 KG CAPACITY FORKLIFT, 15,662 HOURS, 8' FORKS, SELF POSITIONING FORKS, PERKINS ENGINE, SEE THROUGH MAST, DUAL FRONT TIRES, FRONT TIRES 20%, REAR TIRES 80%. FULLY ENCLOSED CAB. WOULD NOT START PROBLEM UNKNOWN UPDATE: WE HIRED CARSON FORKLIFTS TO INSPECT THE LIFT. DUE TO COVID PARTS ARE 2-3 WEEKS OUT. WHAT HIS REPORT IS HE KNOWS THE HIGH PRESSURE FUEL LINES ARE CRAKED TO REPLACE COUPLE $100 FOR PARTS. NEXT STEP IF THAT DOES NOT FIX IS TO REPLACE INJECTORS NOW UP TO $2500 NEXT WOULD BE INJECTOR PUMP $6800. WHEN HE FORCED FUEL ENGINE HIT. HE SAID HE FEELS STRONGLY THAT THIS WOUKD FIX LIFT. I WILL BE GLAD TO GIVE BUYER MECHANICS CONTACT.

905
Toyota Forklift
Model 8FGCU25, 4000 LB Lift Capacity, 20,000 hours, 3 stage, LP, plumbed for side shift, OSHA certified, Well maintained clean machine. 

906
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK. Located at 8482 US 221 Marion, NC 28752

911
Hyster H330XL forklift does not run
S/N D019D01932S. No tires. Nice heavy 8’ forks Side shift and fork positioner. Cummins engine condition unknown. This lift will be sold at the Robbinsville NC site but is located and must be picked up from the Blackstone Va. location. 507 N West Ave, Blackstone,Va.

912
CAT V330C FORKLIFT
CAT V330C FORKLIFT (AT OLD BOILER SYSTEM) 33,000 LB CAPACITY, SIDE SHIFT, SEE THROUGH MAST, DUAL FRONT TIRES, (2,642 HRS) NO FORKS, CAT 208 ENGINE, WAS TOLD TO HAVE FUEL INJECTION ISSUES WILL NOT START FOUND FORKS AND HAVE PICTURE ADDED TO PHOTOS

913
2004 CHEVY VAN
2004 CHEVY ASTRO AWD VAN (VIN: 1GNEL19X14B124236) BACK SEATS ARE MISSING, A/C, CRUISE, AM/FM/CD PLAYER, UNKNOWN MILES, POWER LOCKS, FRONT TIRES: 60-70%, REAR 20%

914
*Fruehauf 40' Van Trailer*
*open top, No title

GALLEERY

915
Forks
skidloader forks, in good condition

IMG

136
* Box Fan
4'

137
* Box Fan
4'

138
* Box Fan
4'

139
* Pallet Roofing Paper
.

140
*Pine Insulation
(2) Pallets

141
*(2) Cylinders, Auger Piece & Belt
.

142
*Steel & Wood Table
(1) Pallet of

143
*Pallet Rack & Steel Rack
.

144
*4' x 8' Steel Table & Contents
Around Steel Frames & Poly Shield, Motor , Forklift tire, collector pipe, all lots numbered 145,145A,145B,146,148

147A
*Rolling pedistal fan
.

148A
*Drum & Steps
Drum dolly & portable steps

149
(4) Motors as Marked
125 HP & 7.5 HP

149A
*Rolling Supply Cart
.

150
*Bearings
.

150A
*Parts & componets
for spindless lathe lines

151
*Pump W/ Wand
.

151A
*Pallet of Misc.
(2) Pallets

152
*Chain
at Gem Pain Barrel

153
*Bolt Bin W/ Contents
.

153A
*Lumber Carts
(2) Lineberry lumber carts (one money)

154
*(2) Steel Saw Horses & Table
Against Wall

154A
*Skid of Firefighter Antifreeze
Firefighter GL48 antifreeze for wet fire sprinkle system

155
*(2) Rolls of Belting
.

155A
*Skate Roll Section
6 X 6 tilting skate roll section w/ 3 layer 4' wade skaterolls

156
*Pallet of Misc.
.

156A
*Skate Rolls
8' wide (3) tier (2) w/ skate rolls w/ possible dryer accessories

157
*Flat Racks
(18) 3' X 4 1/2 Flat Racks

158
*Skate Roll
5 1/2 X 24" Skate roll on 4' legs

159
*Tilting Stand
8' Tilting skate roll stand

160
*Barrel Stand
Gravity flow barrel stand on wheels

160A
*Pallet Jack
5500 # pallet jack

161
*Cart w/ end rails
3' X 5'

162
*Double Door Cabinet
Steel cabinet

163
*Slotted Racks
(3) Slotted raccks 5' X 6' w/ 2' bays, all for one money

164
*Steel table
6' X4' X 4' high Steel table w/ contents

165
*Maitenance Platform
.

166
*(3) Pallets Misc.
1 pallet chain, 1 pallet of wood, 1 pallet w/ 2 boxes of roll, elec. wire & box

167
*Gear Reducers
Pallet of gear reducers (Gear Motors) (2) right angle (1) Straight

168
*Roll Wide Belt
18"

169
*(3) Motors
(1) 7.5 hp 885 RPM (1) 15 hp RPM unknown (1) 10 hp 1175 RPM

170
*(4) Motors
7.5 hp some good, some bad

171
*(3) motors
7.5 hp condition unknown

172
*Kiln Fan Motors
Condition unknown

173
*(2) HYD Cylinders
Huge

174
*Steam Valve Fitting
.

175
*(3) Carts
(1) Lineberry not complete (2) stationary

176
*Rolling Cart
3' X 5'

177
*(2) Pallets Contents
Hard Hats & (2) Drawer File

178
*Wooden Cabinet
W/ Casters

178A
*Acetylene Hose, Misc.
(2) Pallets, Huge Cable Grip, Misc. Steel Conduit

179
* Belt Conveyor
17' ERSI Conveyor W/ Motor & Control, 27" Wide

180
*Belt Conveyor
12' x 27" W/ Motor & Control, Stops & Air Kick Off

180A
*Approx. (14) Steel Plates
4' x 8' x 1/4"

180B
*Misc. Steel & Rebar
.

180C
*Pipe and Steam Pipe
at Exit Door Along Front Wall of Buildings

181
*Score Saw Arbors
W/ Saws

182
*Blower
Twin City Fan Size 917 W/ 20 HP Motor & Control

183
*Enclosed Blower
W/ 15-20 HP Motor

184
*Blower
Unknown, 15-20 HP Motor

185
*15 HP Hydraulic Power Pack
.

186
*Motor Controls
Engineered Control Systems

187
*Baldor 10 HP Motor
You name it it's there

188
*Chop Saw
Copco Carriage Type W/ Roller Conveyor

188A
*Koger Blower
No Motor

190
*Steel Work Table
.

191
*Blower
W/ 7.5 HP Motor

192
Shredder
Horizontal Feed, Bottom Discharge

193
30,000 lb SCISSOR LIFT
6'X8' WITH WELDED ON STEEL FRAME THAT IS 8'X18'

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Oak Valley Hardwoods, Inc- Robbinsville
 Live Auction
 
Sale Date(s)
Friday Aug 28, 2020 Completed
Sale Location

ROBBINSVILLE, NC 28771
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Winning bidders have 30 days to remove the larger equipment.

Winning bidders of boiler and buildings have 120 days to remove. 

Rigging is the responsibility of the buyer and all riggers will need to be properly insured.

Rigging and load-out may be scheduled by calling Zach Kittrell at 931.224.0699.

00
Information Lot
Auction is set to start at 10:00 Am EST, we will follow the online catalog in order, we plan to sell the rolling stock at 2:00 PM regardless of where we are in the catalog order. 

100
*All Steel Bin
4' x 6', 46" deep

100A
*All Steel Bin
4' x 6', 46" deep

100B
*All Steel Bin
4' x 6', 46" deep

101
*Baker's Brother Waste Equipment
6' x 6' x 6', (8) cy dumpster

102
*5 HP Hydraulic Pack
and box w/ steel & wire

103
*Control Station
for spindle less lathe

104
*H-78 Chain
entire pallet

104A
*Shark Bite Pex Line
(2) New Rolls 1/2”x300’ shark Bite pex water line

105
*81X Lug Chain
(1) Rolls on Pallet

107
*NEW H-78 RT Chain
(2) Huge Packed Stacks

108
*Electric Motors
7.5 HP, (2) 5 HP, 2 HP, 1 HP, Nema 0 Starter and Motor Brackets

109
*Bearings & Sprockets
Pillow Block Approx. # (6) 2", (2) 3 7/16", (4) 1 7/16", (1) 2 1/4" Type, (3) 1 15/16"-2", Double Drive Sprockets, Chain Sprockets

110
*Drives & Motors
(2) Toshiba 3 HP, (1) Tea Xinlian Reduction Drive, (2) Right Angle Reduction Drives & (2) 24" W x 10" Hourglass Rolls

111
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

112
*Dry Kiln Motor
SII, 10 HP (In Crate), Choice

113
*10 HP Motor
880 RPM 230/460 V 284 T Frame

114
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

115
*10 HP Motor
1172 RPM, 460 V VFD, Marine Duty

116
*10 HP Kiln Fan Motor
SII

117
*Barrel Dolly
.

118
*Charger Booster
Fleet

119
*Floor Vacuum
Elgee

120
*Grill
Pretty Nice

121
*Breakers & Conduit Fittings
Schneider 60 AMP, Electrical Conduit Fittings

122
*Lot of Chairs
.

123
*Misc. Steel, Drives, Etc.
Misc. Steel at Log Entry Building Door, Step Ladder Drives Motors, Light Plant Plywood w/ I-Beam, Sprockets & Bearings

125
*6 HP Shop Vac
Craftsman 16 Gallon

126
*(2) Roller Chain Conveyors
6' x 23" w/ HD 140 RC Chain

127
*Belt Conveyor Section
w/ 1 HP Motor

128
*1 HP Motor
for Lathe Conveyors (Spare)

128A
*1 HP Motor
for Lathe Conveyors (Spare)

128B
*1 HP Motor
for Lathe Conveyors (Spare)

128C
*1 HP Motor
for Lathe Conveyors (Spare)

129
*Stacking Rack
Veneer Core or Dimension (to right of lathes)

130
*Maintenance Room and Parts
for Lathe Lines Includes All Shelves, Cabinets Outside Room as Marked and OSHA Rail NOT Installed, Yellow Steel Outside Room, Green 5 x 6 1/2' Cabinet, Misc. Steel Along Wall to the Far Right

131
*Crossover Stairs
.

132
(2) Roller Chain Conveyors
6', Steel Plate

133
*Steel Work Table, Contents
4' x 8', Includes Roller Chain & Contents

134
* Pedestal Fan
3'

200
TREE LENGTH LOG DECK
25' 4 STRAND TREE LENGTH LOG DECK, 24' WIDE HAS 2 INDEPENDENT DRIVE; H78 CHAIN, AND STOP AND LOADER SYSTEM, SUPPORTS TO THE GROUND

201
ENDWISE LOG TROUGH
40' ENDWISE LOG TROUGH, 110 LADDER BACK CHAIN, HYDARULIC DRIVE; STEEL SUPORTS TO GROUND, CHAIN WILL NEED REPLACED BEFORE LONG.

202
BREWCO SLASHER SAW
BREWCO SLASHER SAW 60" INSERTED TOOTH SAW, CLIMATE CONTROL CAB AND CONTROLS, 40 HP ELECTRIC MOTOR, 2 HYDRAULIC OPERATED LOG HOLD DOWNS ON INFEED; 2 HYSTRAULIC OPERATED LOG HOLD DOWNS ON OUTFEED, INCLUDES 12' OUTFEED ENDWISE LOG TROUGH WITH 110 LADDER BACK CHAIN AND TWO KICKERS. HYDRAULIC DRIVE, NO HYDRAULIC SUPPLY.

202a
6'X8' REJECT LOG TABLE

202B
15'X12" WASTE CONVEYOR; GEAR MOTOR DRIVE

202C
10 HP HYDRAULIC SUPPLY UNIT

203
CATWALK SECTION
4'X20' CATWALK SECTION AT MERCHANDISING SYSTEM

204
TIE BACK OF 200-203 WITH 10% RAISE
TIE BACK OF LOTS 200-203 WITH A 10% RAISE

205
HOURGLASS ENDWISE LOG TROUGH
38' HOURGLASS ENDWISE LOG TROUGH WITH (27) 20" WIDE HOURGLASS ROLLS, NO HYDRAULIC SUPPLY, HYDRAULIC DRIVE, STEEL SUPPORTS TO THE GROUND

206
LOG KICKER SYSTEM
4' LOG KICKER SYSTEM. HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM. NO HYDRAULIC SUPPLY. STEEL SUPPORTS TO THE GROUND

207
ENDWISE LOG CONVEYOR
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

208
LOG KICKER SYSTEM
4' LOG KICK SYSTEM, HYDRAULIC DRIVE ROLL CASE, CHAIN LIFT SYSTEM, NO HYDRAULIC SUPPLY, STEEL SUPPORTS TO THE GROUND

209
ENDWISE LOG TROUGH
7' ENDWISE LOG CONVEYOR; (6) 20"X8" HOURGLASS ROLLS, HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

210
ROLLCASE
11' ROLLCASE HYDRAULIC LIFT LOG KICKERS, 48" LOGS

211
HYDRAULIC PACK
15 HP HYDRAULIC PACK

212
TIE BACK OF 205-210 WITH 10% RAISE
TIE BACK OF LOTS 205-210 WITH 10% RAISE

213
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

214
HAUL UP LOG DECK
7'X3' 3 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

264

215
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

216
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

217
VENEER BACK PEELER
SPINDLELESS 4' VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

218
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

219
TIE BACK LOTS 213-218 WITH 10% RAISE
TIE BACK OF LOTS 213-218 WITH A 10% RAISE

220
LOG DECK
48'X3' 2 STRAND LOG DECK WITH H78 CHAIN. HYDRAULIC DRIVE/NO HYDRAULIC SUPPLY

221
HAUL UP LOG DECK
7'X3' 2 STRAND HAUL UP LOG DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

222
ROTATE GOLD LOG DEBARKER
57" ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

223
HOURGLASS ROLLCASE
6' HOURGLASS ROLL CASE WITH (4) 20"X10" ROLLS, LOG KICKER AND STEEL PLATE, GEAR REDUCTION DRIVE

224
VENEER BACK PEELER
SPINDLELESS 4’ VENEER BACK PEELER (59") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

225
VENEER STACKING SYSTEM
VENEER STACKING SYSTEM TO INCLUDE 22'X4' BELT CONVEYOR, 4' WIDE VENEER PRESS, 13' TRANFER BELT CONVEYOR TO VENEER STACKER, 11'X4' VEENER STACKER, ELEVATOR WITH CHAIN OUTFEED COMPLETELY SELF CONTAINED WITH ALL CONTROLS ATTACHED

226
TIE BACK LOTS 220-225 WITH 10% RAISE
TIE BACK OF LOTS 220-225 WITH A 10% RAISE

227
HYDRAULIC PACK
15 HP HYDRAULIC PACK

228
LOG DECK
48'X8' 4 STRAND LOG DECK WITH H78 CHAIN WITH HJYDRAULIC DRIVE, NO HYDRAULIC SUPPLY

229
HAUL UP LOG DECK
7'X8' HAUL UP DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

230
LOG DEBARKER
8' ROTATE GOLD LOG DEBARKER VALVE CONTROLS AT OPERATOR STATION; 7.5 KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX30132M-4)/11KW-60HZ 3 PHASE INDUCTION MOTOR (TYPE: YX3-163M-4) , SELF CONTAINED HYDRAULIC PACK, ELECTRIC CONTROLS ATTACHED

231
ENDWISE LOG TROUGH
10' ENDWISE LOG TROUGH (5) 20"X10" HOURGLASS ROLLS

232
VENEER BACK PEELER
SPINDLELESS 8’ VENEER BACK PEELER (105") INCLUDES 6'X4' INFEED LOG FEED, PUSH BUTTON CONTROLS, MOTOR CONTROLS ATTACHED

233
XUANJIN MACHINE CO. LTD VENEER STACKER
XAUNJIN MACHINE CO. LTD VENEER STACKER (9'X5') TO INCLUDE 22' INFEED BELT SYSTEM COMPLETELY SELF CONTAINED, CONTROLS ATTACHED

234
HYDRAULIC PACK
20 HP HYDRAULIC PACK

235
TIE BACK OF 228-234 WITH 10% RAISE
TIE BACK OF LOTS 228-234 WITH A 10% RAISE

236
BELT CONVEYOR
65' BELT CONVEYOR WITH 24" CLEATED BELT, GEAR REDUCTION DRIVE

237
BELT CONVEYOR
55' BELT CONVEYOR WITH 18" BELT, GEAR REDUCTION DRIVE

238
CATWALK SECTION
(2) CATWALK SECTIONS AT DEBARKER

239
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239A
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

239B
CONTROL PLATFORMS
52"X32"X63" CONTROL PLATFORMS

240
HIGH PRECISION MACHINE TOOL KNIFE GRINDER
HIGH PRECISION MACHINE TOOL KNIFE GRINDER HAS (2) 52"X7" MAGNETIC HOLDING PLATES, OVERALL WIDTH 162", SELF CONTAINED MOTOR CONTROLS

241
SPARE KNIVES FOR PEELER
(2) 106" SPARE KNIVES FOR PEELER

242
SPARE KNIVES FOR PEELER
(2) 59" SPARE KNIVES FOR PEELER

243
ELECTRIC PANEL
ELECTRIC PANEL TO INCLUDE 300 AMP DISCONNECT, (2) SIZE 4 STARTERS, (2) WEG SOFT START SSW-03 PLUS, MISC CUT OFFS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

244
DISCONNECT
SQUARE D 800 AMP DISCONNECT. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245
CONTROL PANEL
CONTROL PANEL TO INCLUDE (5) 30 AMP DISCONNECTS, (5) SIZE 2 STARTERS. NO INLET/OUTLET WIRE OR CONDUIT INCLUDED

245A
(2) MOTOR CONTROL PANELS FOR WEIMA SLOW SPEED GRINDER

246
VENEER DRYER
4 TRAY VENEER DRYER, CONTROLS, INCLUDES INFEED LOADING SYSTEM; OUTFEED BELT CONVEYOR, STEAM PIPE TO FIRST CUT OFF AT MAIN PIPE SYSTEM. BLOW PIPE TO ROOF ONLY
 

246A
Lumber cart
8’x4’ STEEL LUMBER CART

246B
LUMBER CART
4x8’ STEEL LUMBER CART

246C
LUMBER CART
4’x8’ STEEL LUMBER CARR

246D
LUMBER CART
4’x8’ STEEL LUMBER CART

246E
STEEL PEDALSTAL
55”x110” x 11”  ALL ONE MONEY

247
VENEER DEFECT MACHINE

248
VENEER DEFECT MACHINE

249
VENEER DEFECT MACHINE

329
GARDNER DENVER AIR COMPRESSOR
GARDNER DENVER 10 HP TANK MOUNT AIR COMPRESSOR WITH CONTROLS AS MARKED

330
GENERAL PHEUMATICS REFRIGERATED COMPRESSED AIR DRYER
GENERAL PNEUMATICS REFREGERATED COMPRESSED AIR DRYER, (MODEL TKF1000A), CUT OFF CONTROLS ATTACHED

255
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 4' DOUBLE SIDED GLUE SPREADER, NEW! NEVER INSTALLED!!

256
HESHAN JIE DING MACHINERY COMPANY AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 4' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

262
HESHAN JIE DING MACHINERY COMPANY8' DOUBLE SIDED GLUE SPREADER
HESHAN JIE DING MACHINERY COMPANY 8' DOUBLE SIDED GLUE SPREADER NEW! NEVER INSTALLED!!

263
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED
HESHAN JIE DING MACHINERY COMPANY 8' AUTOMATIC SUCTION CUP INFEED NEW! NEVER INSTALLED!!

266
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE)
HESHAN JIE DING MACHINERY COMPANY COLD PRESS MACHINE (SPLIT TYPE) NEW! NEVER INSTALLED!!

267
HENSHAN JIE DING COLD PRESS MACHINE (SPLIT TYPE)

272
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED)
HESHAN JIEDING MACHINERY COMPANY 40 LAYER HOT PRESS (PARTIALLY INSTALLED) NEW!

273
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR
HESHAN JIEDING MACHINERY COMPANY PLYWOOD COOLING CONVEYOR NEW! NEVER INSTALLED!!

275
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER
HESHAN JIEDING MACHINERY COMPANY ASH SCRAPER NEW! NEVER INSTALLED!!

276
HESHAN JIE DING MACHINERY COMPANY FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE
HESHAW JIE DING MACHINE COMPANY 4' FULLY AUTOMATIC ROLLER-TRIM SAW MACHINE NEW! NEVER INSTALLED!!

277
HESHAN JIE DING MACHINERY COMPANY 8' TRIM SAW MACHINE
HESHAN JIE DING MACHINERY COMPANY 8' FULLY AUTOMATIC ROLLER TRIM SAW MACHINE NEW! NEVER INSTALLED!!

280
*COMPLETE VENEER TO PLYWOOD LINE*
LOTS 255,256,262,263,266,267,272,273,275,276,277 AS AN ENTIRETY WITH A 10% RAISE TO ALSO INCLUDE ALL TRANSFER EQUIPMENT, ELECTRICAL AND PARTS 

285
SUPER SOUND 2 HEAD SANDING MACHINE
MMNH5613DR SUPER SOUND 2 HEAD 56” WIDE SANDING MACHINE NEW! NEVER INSTALLED!!

300
LUMBER BREAK DOWN SYSTEM
LUMBER BREAK DOWN SYSTEM TO INCLUDE 25'X11' 4 STRAND PACKAGE DECK, TULSA WENCH GEAR REDUCTION DRIVE; 3 ARM, 7 ' BREAK DOWN CHAIN LIFT WITH TULSA WINCH DRIVE, 10' X11' LUMBER TRANSFER DECK, 81X CHAIN; 25' STICK REMOVAL CONVEYOR WITH 10" BELT DRIVE, NO MOTOR CONTROLS

345A

301
BELT CONVEYOR

302
CONTROL STATION CONTROLS

303
LUMBER DECK
16' X11' 4 STRAND LUMBER DECK WITH C55B ROOF TOP CHAIN, MOTOR REDUCTION DRIVE

304
HMC DOUBLE END TRIMMER
HMC 16' DOUBLE END TRIMMER MODEL ET10 (SN: 347-98), 24" SAWBLADES

305
BELT CONVEYOR
22' BELT CONVEYOR WITH 20" BELT UNDER TRIMMER

306
BELT CONVEYOR
10' BELT CONVEYOR 28" BLET GEAR MOTOR DRIVE FROM TRIMMER

307
GREEN CHAIN DECK
70'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN WITH TAIL SPROCKET SHAFT, GEAR MOTOR DRIVE

308
GREEN CHAIN DECK
73'X8' 4 STRAND GREEN CHAIN WITH 81X CHAIN, GEAR REDUCTION DRIVE, NO HEAD SHAFT, 36" LUMBER PULL ROLLS

309
TIE BACK LOTS 300-308 WITH 10% RAISE
TIE BACK OF LOTS 300-308 WITH A 10% RAISE

310
LUMBER CART
15'X52" LUMBER CART

310A
LUMBER CART
15'X52" LUMBER CART

310B
LUMBER CART
16'X52" LUMBER CART

310C
LUMBER CART
15'X52" LUMBER CART

310D
LUMBER CART
15'X52" LUMBER CART NO WHEELS

310E
LUMBER CART
15'X52" LUMBER CART

311
LUMBER CART
14'X40" LUMBER CART

311A
LUMBER CART
14'X40" LUMBER CART

311B
LUMBER CART
14'X40" LUMBER CART

311C
LUMBER CART
14'X40" LUMBER CART

311D
LUMBER CART
14'X40" LUMBER CART

311E
LUMBER CART
14'X40" LUMBER CART

311F
LUMBER CART
14'X40" LUMBER CART

311G
LUMBER CART
14'X40" LUMBER CART

311H
LUMBER CART
14'X40" LUMBER CART

311I
LUMBER CART
14'X40" LUMBER CART

312
CONTROL CENTER
CONTROL CENTER UNDER BREAK DOWN SYSTEM

313
DISCONNECT
200 AMP SQ. D DISCONNECT

325
MEREEN JOHNSON MULTI GANG RIP SAW
MEREEN JOHNSON 3300 DCS MULTI GAND RIP SAW (SN: MJ5688) WITH SLANT BED FEED SYSTEM (5282 HOURS), ELECTRICAL CONTROLS ATTACHED

326
SPARE ARBORS SAWS AND SPACERS
SPARE ARBOR SAWS AND SPACERS

327
MATTISON 404 RIP SAW
MATTISON 404 RIP SAW (MODEL: 3J1934M004), 20 HP MOTOR, TYPE: CMP45

328
BLACK AND DECKER MAGNETIC DRILL PRESS
BLACK AND DECK 3/4" MAGNETIC DRILL PRESS (SN: 3060154)

331
DISCONNECT
SQ. D 200 AMP DISCONNECT

332
DRY KILN #1,CONTROLS AND DOOR
DRY KILN #1, CONTROLS, DOOR

333
DRY KILN #2, CONTROLS AND DOOR
DRY KILN #2, CONTROLS, DOOR

334
DRY KILN #3, CONTROLS AND DOOR
DRY KILN #3, CONTROLS, DOOR

335
DRY KILN #4, CONTROLS AND DOOR
DRY KILN #4, CONTROLS, DOOR

336
DRY KILN #5, CONTROLS AND DOOR
DRY KILN #5, CONTROLS, DOOR

337
DRY KILN #6, CONTROLS AND DOOR
DRY KILN #6, CONTROLS, DOOR

338
DRY KILN #7, CONTROLS AND DOOR
DRY KILN #7, CONTRLOLS, DOOR

339
DRY KILN # 8, CONTROLS AND DOOR
DRY KILN #8, CONTROLS, DOOR

340
DRY KILN #9, CONTROLS AND DOOR
DRY KILN #9, CONTROLS, DOOR

341
SAMPLE OVEN

342
HURST WASTE FIRE BOILER
HURST 400 HP HYBRID WASTE FIRE BOILER, CONTROLS, AUTOMATIC FEED SYSTEM (SN: HYB2925/150) (BUILT: 1999 JOB #110) HURST MOVED AND SET THIS BOILER UP FOR OAK VALLEY HARDWOODS. HURST CHECKED IT OUT AND IT IS IN A-1 CONDITION!

343
INDUSTRIAL BOILER SYSTEM
LIKE NEW INDUSTRIAL BOLER SYSTEM, RAM TYPE FEEDER INCLUDES CONTROLS AS MARKED, 15 HP MOTOR (WAS INSTALLED NEW BY HURST WHEN BOILER SYSTEM WAS PUT IN)

344
VIBRATING CONVEYOR
25'X20" VIBRATING CONVEYOR WITH 7" SIDES

346
LARGE QUANITY OF PROCESSED AND DRIED VENEER
LARGE QUANITY OF PROCESSED AND DRIED VENEER, INCLUDES ALL VENEER ONSITE

347
7' STACKING STICKS

348
4X4 BUNK DIVIDERS

4X4 BUNK DIVIDERS

349
CORES

350
DIP TANK
10'8"X20'2"X6'4" LUMBER DIP TANK WITH COMPLETE HYDRAULIC SYSTEM

351
IRVINGTON MOORE PACKAGE DECK
29'X14' IRVINGTON MOORE 4 STRAND PACKAGE DECK (1) NEW STRAND IS ON GROUND TO BE PUT ON, RUFNER 10 HP GEAR REDUCTION DRIVE

352
IRVINGTON MOORE HAUL UP DECK
11'X14' IRVINGTON MOORE 4 STRAND HAUL UP DECK, GEAR REDUCTION DRIVE, STEEL SUPPORT TO GROUND

353
IRVINGTON MOORE UNSCRAMBLER
5' IRVINGTON MOORE PADDLE TYPE UNSCRAMBLER WITH EVENENDER ROLLS, STEEL SUPPORTS TO THE GROUND

354
IRVINGTON MOORE GRADING STATION
IRVINGTON MOORE GRADING STATION WITH 11' 6 STRAND DECK, H78B ROOF TOP CHAIN, SLAT EVENENDER DEVICE, GRADING TABLE, 2 WAY SORT SYSTEM AND PUSH BUTTON CONTROLS

355
IRVINGTON MOORE REJECT BOARD CONVEYOR
IRVINGTON MOORE 20' REJECT BOARD CONVEYOR WITH 24" BELT UNDER GRADING STATION

356
IRVINGTON MOORE LUMBER DECK
IRVINGTON MOORE 32'X12' 4 STRAND LUMBER DECK WITH H78 CHAIN, GEAR REDUCTION DRIVE

357
IRVINGTON MOORE LUMBER STACKER
IRVINGTON MOORE 7' 4 ARM CHAIN TYPE LUMBER STACKER TO INCLUDE STICK PLACING STATION, LUMBER ELEVATED ROLL CASE,HYDRAULIC PACK, ALL DRIVES AND CONTROLS AS MARKED

358
ROLLCASE
55' ROLL CASE WITH (21) 88" ROLLS, 2 ARE INDEPENDENTLY POWERED WITH GEAR REDUCTION DRIVES

359
STICK DECK
45' 3 STRAND STICK DECK WITH DRIVE

360
TIE BACK LOTS 351-359 WITH 10% RAISE
TIE BACK OF LOTS 351-359 WITH A 10% RAISE

361
FIRE POOF CABINET
43"X65" FIRE PROOF CABINET

362
(4) PEDESTAL FANS

362A
(2) CONVEX MIRRORS
(2) CONVEX MIRRORS
 

363
HANGING BOX FAN
3'X3' HANGING BOX FAN

364
JACKSON & CHURCH WASTE OIL BURNING FLEX AIR FURNACE
JACKSON & CHURCH FLEX AIR FURNACE WASTE OIL BURNING, INCLUDES TANK OUTSIDE

365
ROLL AROUND LADDER
4 STEP 3' ROLL AROUND LADDER

366
PALLET JACK
5500 LB. PALLET JACK, 20" WIDE

367
WOOD CRATE AND CONTENTS

368
VERTICAL BARREL DOLLY

369
HORIZONTAL BARREL DOLLY

370
CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 DESK, 6 CHAIRS, REFRIGERATOR, FILE CABINET, MICROWAVE, SAMSUNG WALL AIR CONDITIONER

371
WASTE BIN
4'X4'X4' WASTE BIN

372
B-23934 SPROCKETS
(9) B-23934 SPROCKETS

373
METAL CABINET WITH CONTENTS

374
METAL CABINET WITH CONTENTS

375
LADDER
(2) LADDERS

376
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE/ (1) OUTSIDE MAIN OFFICE
SMOKERS CEASE CONTAINER OUTSIDE LOG OFFICE (1) OUTSIDE MAIN OFFICE

377
BUILDING
40'X150' PREFAB METAL BUILDING WITH 20' SIDES, 3 ROLL UP DOORS, 2 WALK IN DOORS

377A
ELECTRIC PANEL
ELECTRIC PANEL AS MARKED TO INCLUDE (2) 200 AMP DISCONNECTS, (3) 100 AMP DISCONNECTS (2) MISC ELECTRICAL BOXES, )1) BREAKER BOX (1) 37.5 KVA TRANSFORMER

377B
SPRINKLER SYSTEM AT STACKER

378
FUEL TANK
FUEL TANK OUTSIDE OF GRADING STATION BUILDING

380
*30’x30’ shop building
* ALL STEEL SHOP BUILDING 30’x30’x20’ EVE 20’x20’ ROLLUP DOOR 2- WALK IN DOORS.

381
CONCRETE LUMBER BUNK
ALL CONCRETE LUMBER BUNKS ON YARD

382
CONTAINER LOADING RAMP

505

383
LUMBER BUNK TOPPERS

384
ALL LOGS ON LOG YARD

385
CONVEYOR
3 STRAND-4 ARM STOP AND LOADER WITH 10' ROLLER CHAIN, NO DRIVE

618
OFFICE- STORAGE DRAWER
3 DRAWER WOODEN STORAGE UNIT

386
LOG LOADER
18' - 6 STRAND LOG LOADER WITH GEAR MOTOR DRIVE- 2 STRANDS NOT ATTACHED

387
TRANSFER DECK
(3) 5' TRANSFER DECKS

388
LOG TROUGH
22' ENDWISE LOG TROUGH 10" 110 LADDER BACK CHAIN/HYDRAULIC DRIVE

389
CATWALK AN MISC STEEL
CATWALK AND MISC STEEL AS MARKED

390
LOG TROUGH
15' ENDWISE LOG TROUGH DUAL H78 CHAIN, GEAR REDUCTION DRIVE

391
LOG TROUGH
3 SECTIONS OF 30' ENDWISE LOG TROUGH, NO CHAIN, GEAR REDUCTIONS DRIVE

392
TIME SAVER 3 HEAD SANDER
TIME SAVER 3 HEAD SANDER, MODEL 852-6CR (SN: 19349) 52" width Capacity, 13" Loading Space, Cross Belt 25hp 230/460 3phase, Platen Head with sensing 25hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Platen Head with sensing 20hp 230/460 3 phase, Cross belt stroke sander 20hp 230/460 3 phase, Panel cleaning Brush, Hydraulic motor/ tank assembly 15 hp, 230/460v 3 phase, Vacuum feed belt, Hydraulic variable speed feed, Lenze Smvector AC tech drive controller, Vacuum assembly, Free standing operator control console S/N 19340, Please Note: the Doucet BTWB3-48 Outfeed Motorized Roller Conveyor IS NOT INCLUDED in this lot. Sander shows some rust from being placed outside, but is in good working condition.

392A
*Multi-Rip Saw*
2nd Industrial Wood Working Machine, 30" Cap, with 8 sawblade Capacity, Good Working Condition

393
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP CHARGE, MISSING COVER, NO MOTOR

394
FULGUM CHIPPER
60" FULGUM CHIPPER, 6 KNIFE HORIZONTAL FEED, TOP DSICHARGE (SN: F1.F1L.1101) 75 HP MOTOR

395
BELT CONVEYOR
12' X24" BELT CONVEYOR THAT FED GRINDER, GEAR MOTOR DRIVE

396
BELT CONVEYOR
21'X18" BELT CONVEYOR WITH GEAR MOTOR DRIVE

397
PEEL AND STICK ROOFING
PALLET OF LIBERTY SBS SELF ADHERING "PEEL AND STICK" ROOFING (18) PALLET WITH 12 BOXES, (1) PALLET WITH 10 BOXES 100 FEET PER BOX COLOR: BLACK

398
AIR COMPRESSOR
GARDNER DENVER 200 HP ELECTRA SCREW TYPE AIR COMPRESSOR. MODEL EDP99C, (SN: S062586)

399
AIR COMPRESSOR
SULAIR LS-25 20 HP SCREW TYPE AIRCOMPRESSOR, (HOURS: 5685)

400
AIR DRYING SYSTEM
2009 PNEUMATECH AIR DRYING SYSTEM: TYPE: AD1250

401
METAL SHELF AND CONTENTS IN BACK OF BUILDING

402
METAL SHELF AND CONTENTS IN BACK OF BUILDING

403
METAL SHELF AND CONTENTS IN BACK OF BUILDING

404
METAL SHELF AND CONTENTS IN BACK OF BUILDING

405
CONTENTS OF ROOM NOT ALREADY SOLD

406
CONTENTS OF ROOM
CONTENTS OF ROOM IN BACK OF BUILDING

450
BLOWER
CAROLINA MODEL 40" BLOWER, 40 HP MOTOR CONTROLS ATTACHED

451
KOGER BLOWER MODEL CW0360
KOGER BLOWER MODEL CW-60 WITH 40 HP MOTOR

452
AUTOMATIC FEEDER SYSTEM
DUAL 4 CHAIN AUTOMATIC FEEDER SYSTEM, 2 GEAR MOTOR DRIVES UNDER THE CYCLONE

453
DUST HOUSE
CARTER DAY 10' DUST HOUSE INCLUDES AIR LOCK

900-a
Hyster H360HD2 Forklift
S/N. J01E02115M. With side shift and fork positioner 12.00-20 front dual tires. And back tires. The same.

454
BLOWER
44" BLOWER, 50 HP MOTOR, CONTROLS ATTACHED

901
Taylor TE300M forklift
Taylor 30,000 pound forklift. EAGLE. With side shift, DUAL FRONT TIRES. 6 ft forks 12.00 20 NHS dual front tires. 70% 10.00-20 rear tires. One 40% one 0%

455
AUTOMATIC FEEDER SYSTEM
4 CHAIN TYPE AUTOMATIC FEEDER SYSTEM WITH 2 GEAR MOTOR DRIVES

456
(2) CYCLONES
(2) CYCLONES (LEFT SIDE) ON TOP OF SILO

457
(2) CYCLONES
(2) CYCLONES (RIGHT SIDE) ON TOP OF SILO

457A
*Royal Chip Bin*
*W/hyd unit, 14'x 16' , This a very nice bin,  Located at 4595 Jonathan Creek Rd, Waynesville, NC 28785

458
DUST PIPE
ALL DUST PIPE AT SILOS AND ON GROUND EXCLUDING ANY ON THE MAIN BUILDING. MOSTLY 15" DIAMETER

459
FUEL TANK AND PUMP
FUEL TANK AND PUMP IN BACK NEAR SILO

460
WASTE OIL TANK
WASTE OIL TANK NEAR SILOS

461
FORLIFT FORKS
42" FORKS BEHIND PLANT NEAR SILO

462
WASTE LOADING BIN
WASTE LOADING BIN, DUAL 10' AUGER SYSTEM TO INCLUDE BIN, AUGER, STAR LOADING SYSTEM

463
BLOWER
44" KOGER BLOWER

465

Taylor TE-300M forklift

500
ELECTRICAL
SQUARE D H-VL LOAD CURRENT INTERRUPTER SWITCH, NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

501
ELECTRICAL
SIEMENTS ELECTRIC PANEL AS MARKED W/ 400 AMP DISCONNECT, 200 AMP DISCONNECT (4) AMP DISCONNECT AND (1) CONTROL BOX NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

502
ELECTRICAL
SQUARE D 600 AMP DISCONNECT NEAR END OF DRYER NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

503
ELECTRICAL
MOTOR CONTROL PANEL TO INCLUDE RATIOTROL AC INVERTER ACE F SERIES NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

504
ELECTRICAL
SQUARE D TYPE 3, 2000 AMP MAIN DISCONNECT (SN: 333)/SQUARE D 2000 AMP DISCONNECT OUTSIDE OF OFFICE DOOR IN BUILDING NO INLET OR OUTLET WIRE/CONDUIT INCLUDED

600
OFFICE- BOOK SHELF
WOODEN BOOK SHELF IN NURSES STATION

601
OFFICE- METAL CABINET
METAL CABINET IN NURSES STATION

602
OFFICE-SAFE
SAFE IN NURSES STATION

603
OFFICE- CHAIRS
3 CHAIRS IN NURSES STATION

604
OFFICE- TABLE, FILING CABINET
4' TABLE AND 5 DRAWER METAL HORIZONTAL FILING CABINET IN NURSES STATION

605
OFFICE-TABLE
KEURIG COFFEE MAKER AND 4' TABLE IN NURSES STATION

606
OFFICE - CHAIRS
2 WOODEN CHAIRS IN NURSES STATION

607
OFFICE- PRINTER/COPIER
BROTHER MFC-L2740DW COPIER/PRINTER (NOTE ATTACHED STATES: MAKES COPIES DOESN'T SCAN OR FAX. 3 BOXES OF TONER, EXTRA DRUM

608
OFFICE-SUPPLIES
MISC OFFICE SUPPLIES INCLUDES HP DESKJET 1000

609
OFFICE-MEDICAL SUPPLIES
MISC. MEDICAL SUPPLIES TO INCLUDE STRETCHER, CRUTCHES, HAZARD DISPOSAL BIN WITH RED DISPOSAL BAGS, AND MISC BANDAGES

610
OFFICE - CLEANING SUPPLIES
MISC CLEANING SUPPLIES, MOP BUCKET, CLEANING SUPPLIES

611
OFFICE- PING PONG TABLE
PING PONG TABLE

612
OFFICE CONFERENCE TABLE
9' CONFERENCE TABLE

613
OFFICE- HEARING TESTNG BOOTH
HEARING TESTING BOOTH

614
OFFICE 5 CHAIRS
5 BLACK LEATHER ROLLING CHAIRS WITH ARMS

615
OFFICE 2 CHAIRS
2 CREAM CLOTH HIGH BACK CHAIRS

616
OFFICE 2 CHAIRS
2 MAROON CLOTHER CHAIRS WITH WOODEN ARMS

617
OFFICE 2 END TABLES
2 WOODEN END TABLES WITH DRAWERS

619
OFFICE- OFFICE DECORE
OFFICE DECOR TO INCLUDE ART WORK AND PLANTS

620
OFFICE- 4 DRAWER SOFA TABLE
4 DRAWER SOFA TABLE IN ENTRANCE HALL

621
OFFICE- CONTENTS OF OFFICE
CONTENTS OF OFFICE, 2 CHAIRS, 3 ROLLING CABINETS, ENTERTAINMENT CENTER, DESK, CREDENZA, TABLE, 2 BOOK SHELVES

622
OFFICE- SAFETY EQUIPMENT
SAFTEY EQUIPMENT TO INCLUDED HARD HATS AND SIGNS

623
OFFICE- TAPE/ CONTAINER TIES
TAPE AND CONTAINER TIES

624
OFFICE- CONTENTS OF OFFICE
CONTENTS OF FIRST OFFICE IN HALL TO INCLUDE 2 CHAIRS, METAL FILING CABINET, 2 BOOK SHELVES AND DESK

625
OFFICE-CONTENTS OF OFFICE
CONTENTS OF 2ND OFFICE IN HALL TO INCLUDE OAK DESK, CREDENZA, BOOK SHELF, AND 3 CHAIRS

626
OFFICE- CONTENTS OF OFFICE
CONTENTS OF 3RD OFFICE IN HALL TO INCLUDE WOODEN DESK, AND 2 CHAIRS

627
OFFICE- CONTENTS OF OFFICE
CONTENTS OF LAST OFFICE IN HALL TO INCLUDE WOODEN DESK, WOODEN FILE CABINET, BOOK SHELF, AND 3 CHAIRS

900
559C Cat Knuckle Boom Loader
2017 , Serial # KB400596, Mounted on Jewel LTC-660 Self propelled Carrier  Serial # 11901. Transmission for carrier is disengaged and needs work. 
Machine has just over 3800 original hrs. with a new factory engine block installed with under 20 hours! Muffler will blow white smoke for a few minutes when first fired up due to muffler heater burning off old oil from previous block (per mechanic)
Nice clean, tight, smooth operating unit. This is a rare find!
 

902
HYSTER MODEL 300 FORKLIFT
HYSTER MODEL 300 30,000 LB CAPACITY FORKLIFT, 8' FORKS, SHOWING 2181 HOURS, MOTOTROL TRANSMISSION, SIDE SHIFT, SEE THROUGH MAST, HAS FORKS FOR LESS GROUND LEVEL, DUAL TIRES ON FRONT TIRES, MAYBE 40%, PERKINS DIESEL ENGINE, FULLY ENCLOSED CAB, 13'6" MAST

903
CATERPILLAR 174 MODEL DP80
CATERPILLAR 175 MODEL DP80, 17,500 LB CAPACITY FORKLIFT (SN: 132B-00030) 15,092 HOURS, SIDE SHIFT, SEE THROUGH MAST, 12'6" MAST, MITSUBISHI DIESEL ENGINE, 2 NEW BATTERIES, DUAL TIRES ON FRONT, 2 FRONT TIRES RIGHT & LFT 80% THE OTHER 4 TIRES 10%, 7' FORKS

904
LINDE MODEL H160 FORKLIFT
LINDE MODEL H160 16,000 KG CAPACITY FORKLIFT, 15,662 HOURS, 8' FORKS, SELF POSITIONING FORKS, PERKINS ENGINE, SEE THROUGH MAST, DUAL FRONT TIRES, FRONT TIRES 20%, REAR TIRES 80%. FULLY ENCLOSED CAB. WOULD NOT START PROBLEM UNKNOWN UPDATE: WE HIRED CARSON FORKLIFTS TO INSPECT THE LIFT. DUE TO COVID PARTS ARE 2-3 WEEKS OUT. WHAT HIS REPORT IS HE KNOWS THE HIGH PRESSURE FUEL LINES ARE CRAKED TO REPLACE COUPLE $100 FOR PARTS. NEXT STEP IF THAT DOES NOT FIX IS TO REPLACE INJECTORS NOW UP TO $2500 NEXT WOULD BE INJECTOR PUMP $6800. WHEN HE FORCED FUEL ENGINE HIT. HE SAID HE FEELS STRONGLY THAT THIS WOUKD FIX LIFT. I WILL BE GLAD TO GIVE BUYER MECHANICS CONTACT.

905
Toyota Forklift
Model 8FGCU25, 4000 LB Lift Capacity, 20,000 hours, 3 stage, LP, plumbed for side shift, OSHA certified, Well maintained clean machine. 

906
LINDE H136 FORK LIFT
(SN: 35H051011136) 8' FORKS, SIDE SHIFT, SEE THROUGH MAST, SELF POSITIONING, CUMMINS ENGINE DR109, DUAL 12R20 FRONT TIRES, 12.00 BACK TIRES 
RUNS, BRAKES, NEEDS FUEL LINE. RUNS GOOD BUT HAS ONLY A GALLON JUG HOOKED UP AS A FUEL TANK. Located at 8482 US 221 Marion, NC 28752

911
Hyster H330XL forklift does not run
S/N D019D01932S. No tires. Nice heavy 8’ forks Side shift and fork positioner. Cummins engine condition unknown. This lift will be sold at the Robbinsville NC site but is located and must be picked up from the Blackstone Va. location. 507 N West Ave, Blackstone,Va.

912
CAT V330C FORKLIFT
CAT V330C FORKLIFT (AT OLD BOILER SYSTEM) 33,000 LB CAPACITY, SIDE SHIFT, SEE THROUGH MAST, DUAL FRONT TIRES, (2,642 HRS) NO FORKS, CAT 208 ENGINE, WAS TOLD TO HAVE FUEL INJECTION ISSUES WILL NOT START FOUND FORKS AND HAVE PICTURE ADDED TO PHOTOS

913
2004 CHEVY VAN
2004 CHEVY ASTRO AWD VAN (VIN: 1GNEL19X14B124236) BACK SEATS ARE MISSING, A/C, CRUISE, AM/FM/CD PLAYER, UNKNOWN MILES, POWER LOCKS, FRONT TIRES: 60-70%, REAR 20%

914
*Fruehauf 40' Van Trailer*
*open top, No title

GALLEERY

915
Forks
skidloader forks, in good condition

IMG

136
* Box Fan
4'

137
* Box Fan
4'

138
* Box Fan
4'

139
* Pallet Roofing Paper
.

140
*Pine Insulation
(2) Pallets

141
*(2) Cylinders, Auger Piece & Belt
.

142
*Steel & Wood Table
(1) Pallet of

143
*Pallet Rack & Steel Rack
.

144
*4' x 8' Steel Table & Contents
Around Steel Frames & Poly Shield, Motor , Forklift tire, collector pipe, all lots numbered 145,145A,145B,146,148

147A
*Rolling pedistal fan
.

148A
*Drum & Steps
Drum dolly & portable steps

149
(4) Motors as Marked
125 HP & 7.5 HP

149A
*Rolling Supply Cart
.

150
*Bearings
.

150A
*Parts & componets
for spindless lathe lines

151
*Pump W/ Wand
.

151A
*Pallet of Misc.
(2) Pallets

152
*Chain
at Gem Pain Barrel

153
*Bolt Bin W/ Contents
.

153A
*Lumber Carts
(2) Lineberry lumber carts (one money)

154
*(2) Steel Saw Horses & Table
Against Wall

154A
*Skid of Firefighter Antifreeze
Firefighter GL48 antifreeze for wet fire sprinkle system

155
*(2) Rolls of Belting
.

155A
*Skate Roll Section
6 X 6 tilting skate roll section w/ 3 layer 4' wade skaterolls

156
*Pallet of Misc.
.

156A
*Skate Rolls
8' wide (3) tier (2) w/ skate rolls w/ possible dryer accessories

157
*Flat Racks
(18) 3' X 4 1/2 Flat Racks

158
*Skate Roll
5 1/2 X 24" Skate roll on 4' legs

159
*Tilting Stand
8' Tilting skate roll stand

160
*Barrel Stand
Gravity flow barrel stand on wheels

160A
*Pallet Jack
5500 # pallet jack

161
*Cart w/ end rails
3' X 5'

162
*Double Door Cabinet
Steel cabinet

163
*Slotted Racks
(3) Slotted raccks 5' X 6' w/ 2' bays, all for one money

164
*Steel table
6' X4' X 4' high Steel table w/ contents

165
*Maitenance Platform
.

166
*(3) Pallets Misc.
1 pallet chain, 1 pallet of wood, 1 pallet w/ 2 boxes of roll, elec. wire & box

167
*Gear Reducers
Pallet of gear reducers (Gear Motors) (2) right angle (1) Straight

168
*Roll Wide Belt
18"

169
*(3) Motors
(1) 7.5 hp 885 RPM (1) 15 hp RPM unknown (1) 10 hp 1175 RPM

170
*(4) Motors
7.5 hp some good, some bad

171
*(3) motors
7.5 hp condition unknown

172
*Kiln Fan Motors
Condition unknown

173
*(2) HYD Cylinders
Huge

174
*Steam Valve Fitting
.

175
*(3) Carts
(1) Lineberry not complete (2) stationary

176
*Rolling Cart
3' X 5'

177
*(2) Pallets Contents
Hard Hats & (2) Drawer File

178
*Wooden Cabinet
W/ Casters

178A
*Acetylene Hose, Misc.
(2) Pallets, Huge Cable Grip, Misc. Steel Conduit

179
* Belt Conveyor
17' ERSI Conveyor W/ Motor & Control, 27" Wide

180
*Belt Conveyor
12' x 27" W/ Motor & Control, Stops & Air Kick Off

180A
*Approx. (14) Steel Plates
4' x 8' x 1/4"

180B
*Misc. Steel & Rebar
.

180C
*Pipe and Steam Pipe
at Exit Door Along Front Wall of Buildings

181
*Score Saw Arbors
W/ Saws

182
*Blower
Twin City Fan Size 917 W/ 20 HP Motor & Control

183
*Enclosed Blower
W/ 15-20 HP Motor

184
*Blower
Unknown, 15-20 HP Motor

185
*15 HP Hydraulic Power Pack
.

186
*Motor Controls
Engineered Control Systems

187
*Baldor 10 HP Motor
You name it it's there

188
*Chop Saw
Copco Carriage Type W/ Roller Conveyor

188A
*Koger Blower
No Motor

190
*Steel Work Table
.

191
*Blower
W/ 7.5 HP Motor

192
Shredder
Horizontal Feed, Bottom Discharge

193
30,000 lb SCISSOR LIFT
6'X8' WITH WELDED ON STEEL FRAME THAT IS 8'X18'