AUDIX
Listing ID#: 346441

Sale Location

, OR
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Sep 22, 06:49 PM
Bidding Ends: Wednesday Dec 2, 02:00 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Equipment Dispositions

Phone: 408-402-2436
Email: jr@edispositions.com
Website: edispositions.com

EstateSale.com ID#: 10990
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

TERMS AND CONDITIONS


 



  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  

  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.

  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.

  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.

  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.

  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.

  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.

  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.

  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.

  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 

  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  

  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.

  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.

  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.

  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.

  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.

  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.

  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.

  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.

  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.

  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.

  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.

  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 

  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 

  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 

  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.

  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.

  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


Listing Information

1
ALCATEL 620B 2 CHAMBER SPUTTERING SYSTEM - WILSONVILLE, OR
ALCATEL 620B SPUTTERING SYSTEM | MEIVAC 602 PVD SPUTTER / COATER | Alcatel 620B 2-Chamber Sputtering System | New in Original Crates (The system consists of 13 crates), To Include: CTI 9600 Compres...

1
SPUTTERED FILMS INC. SFI 5 (SHAMROCK) Single Chamber Sputtering | Deposition System - Wilsonville, OR

1
CTI-CRYOGENICS ON BOARD WATER PUMP # 8116345G001R

1
MRC SPUTTERING SYSTEM - Wilsonville, OR

2
CTI-CRYOGENICS ON BOARD CRYO PUMP
CTI-CRYOGENICS ON BOARD WATER PUMP

3
SEREN 1000 WATT 13.56MHZ INDUSTRIAL POWER SYSTEM MODEL R10001

4
VAT VALVE

5
CTI-CRYOGENICS MODEL 8011 CONTROLLER

6
RFPP 15000 WATT 13.56 MHZ MODEL 7800003030 RF GENERATOR | RF POWER SUPPLY | TRANSFORMER

7
TENNEY JR. BENCHTOP ENVIRONMENTAL TEST CHAMBER

8
DAGE SERIES 3000 100G BOND TESTER

9
KULICKE & SOFFA MODEL 1472 AUTOMATIC WIRE BONDER

10
KULICKE & SOFFA MODEL 1484 WIRE BONDER

11
KULICKE & SOFFA MODEL 1484 WIRE BONDER

12
ASM MODEL 60AP "EAGLE" WIRE BONDER

13
TEMPTRONIC MODEL TPO412A-2-60 TEMPERATURE FORCING SYSTEM

14
THERMONICS T-2800 TEMPERATURE FORCING SYSTEM
THERMONICS T-2800 PRECISION TEMPERATURE FORCING SYSTEM

15
LOT (2) TEMPTRONICS TPP4010A TEMPERATURE FORCING SYSTEMS

16
MKS 270 SIGNAL CONDITIONER

17
MKS 270 SIGNAL CONDITIONER

18
RFPP 7004-0100-5 CONTROLLER

19
RFPP 7004-0100-5 CONTROLLER

20
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR

21
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR - (MOBILE CART INCLUDED)

22
NESLAB MODEL CFT-33 REFRIDGERATED RECIRCULATING CHILLER

23
SOUTHCOAST INDUSTIRIES MOBILE HAZMAT STORAGE CABINET

24
GENMARK GENCOBOT R92130004-4 ROBOT

25
HIPOTRONIX HD 100 SERIES HI POT TESTER

26
HUTTINGER ELEKTRONIK 952236 2000W DC POWER SUPPLY

27
KSI SERIES 5000 POWER SUPPLY

28
SEREN MC2 S5-5-1000 MATCHING NEWTORK CONTROLLER

29
GENMARK GENCOBOT ROBOT

30
RFPP | AE | ADVANCED ENERGY RF20H 75000000/0 RF GENERATOR

31
HEWLETT PACKARD | HP | AGILENT 4145A SEMICONDUCTOR ANALYZER

32
ADIXEN | ALCATEL ACP 15G DRY PUMP

33
ADIXEN | ALCATEL ACP 15G DRY PUMP

34
ADIXEN | ALCATEL ACP 15G DRY PUMP

35
ADIXEN | ALCATEL ACP 15G DRY PUMP

36
STRATAGENE EAGLE EYE II IMAGING SYSTEM (PARTS)

37
NOVA BIOMEDICAL 300 BIOPROFILE AUTOMATED CHEMISTRY ANALYZER

38
WATERS FRACTION COLLECTOR III 186001878 STANDALONE COLLECTOR

39
QUINCY LAB 10GC 0.7CF GRAVITY CONVECTION OVEN

40
CALIFORNIA AIR TOOL CAT# 1610A TURBO BL OIL FREE ULTRA QUIET AIR COMPRESSOR

41
INSTRUMENT TRANFORMERS INC. 4160 CONTROL POWER TRANFORMER 120-240V 60HZ

42
INTEREX PCS-21OTF SURGE SLAYER

43
THERMO LINDBERG BLUE M ULTRASONIC WATER BATH

44
THERMO LINDBERG BLUE M RWB3 22OA-2 RECIRCULATING CHILLER

45
MILLIPORE MILLI-Q GRADIANT AIO UV ULTR VIOLET WATER PURIFICATION SYSTEM

46
POLARIS ARRAYIT MICRO ARRAY

47
TEMPTRONIC CONTOLLER

48
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

49
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

50
ADVANCE HIVOLT HITEK POWER OL8000/104/28

51
ADVANCE HIVOLT HITEK POWER OL8000/104/28

52
LOT SEMEQUIP & BUCKLEY SYSTEMS - ION IMPLANTATION SUBSYTEM E17227241 W SEMEQUIP P/N 010-000082

53
HVA 8" GATE VALVE

54
HVA 10" GATE VALVE

55
HVA 10" GATE VALVE

56
BLANK

57
ADVANCE HIVOLT HITEK POWER 1140-98035 CONVERTER HIGH VOLTAGE POWER SUPPLY PARTS

58
ADVANCE HIVOLT HITEK POWER 1140-98020 HIGH VOLTAGE DC POWER SUPPLY

59
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

60
APPLIED MATERIALS | AMAT PART

61
HEWLETT PACKARD | HP | AGILENT 1663C LOGIC ANALYZER OPT 015

62
POWER TEN P63C-50200AB DC POWER SUPPLY

63
POWER TEN P63C-50200AB DC POWER SUPPLY

64
POWER TEN P63C-40166AB DC POWER SUPPLY

65
POWER TEN P63C-60166AB DC POWER SUPPLY

66
POWER TEN P63C-20330AB DC POWER SUPPLY

67
POWER TEN P63C-20330AB DC POWER SUPPLY

68
POWER TEN P63C-30220AB DC POWER SUPPLY

69
BERKELEY H9605 HOT CARRIER STRESS TEST FIXTURE

70
ADVANCE HIVOLT HITEK POWER 0180001104121 8000 SERIES CONTROL UNIT

71
BLICKMAN 179-053 STAINLESS STEEL 2-GLOVE LABORATORY GLOVEBOX

72
US STONEWARE M932120DC JAR MILL

73
WYATT DAWN DSP LASER PHOTOMETER

74
ELECTRIC INSTRUMENTS LTD 29" 20 MILLION MEGOHMMETTER

75
PHARMACIA P3500 TABLETOP HPLC PUMP

76
MILLIPORE CYTOFLUOR 2300 FLOURESCENCE MEASUREMENT SYSTEM

77
ORION 101 CONDUCTIVITY METER

78
TECAN HYDROFLEX MICRO PLATE WASHER

79
OLYMPUS TGH VARIABLE POWER SUPPLY

80
APPLIED BIOSYSTEMS 2720 THERMAL CYCLER

81
MOLECULAR DEVICES THRESHOLD AUXILIARY MANIFOLD

82
3M 9100 OVERHEAD PROJECTOR

83
RFPP MODEL 7004-0100-5 RF CONTROLLER

84
RFPP AMNPS-2A RF CONTROLLER

85
RFPP AMNPS-2A RF CONTROLLER

86
HARRISON 880A REGULATED POWER SUPPLY

87
RICOR B53401001 CRYOCOOLER

88
PE PERKINELMER APPLIED BIOSYSTEMS GENEAMP 9700 PCR SYSTEM

89
OLYMPUS PM-CBAD EXPOSURE CONTROL UNIT

90
INVITROGEN BENCH PRO 4100 CARD PROCESSING STATION

91
SAVANT DP100 VACUUM PUMP

92
ORIEL 87301 DETECTION SYSTEM

93
TOMY SEIKO HF-120

94
WEST BOND 7416A-26-32-45 PRECISION WEDGE WIRE BONDER WITH BAUSCH & LOMB MICROSCOPE

95
WEST BOND 1200A CONTROLLER WITH WITH BASE & BAUSCH & LOMB STEREOZOOM 4 MICROSCOPE

96
INVERTED TISSUE CULTURE MICRO-SCOPE PARTS

97
WHITEY 0266-5391-0 3-WAY VALVE

98
ADVANCED ENERGY | AE APEX 3013 RF 13.56 POWER GENERATOR

99
AMCC EV488S EVB EVALUATION BOARD

100
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

101
ALCATEL CFV-900 TURBO CONTROLLER

102
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

103
ALCATEL E0373 / GBB-SF ROBOT

104
LEYBOLD TRIVAC B CAT # 10245/46/55 56 ROTARY VANE VACUUM PUMP S/D 4 84

105
TBD

106
LEYBOLD 400036V0002 DRIVE BEARING CABLE 10M REV AA CONVERTER

107
ALCATEL 5900 CP 400-01114 TURBO SPINDLE ASSEMBLY

108
TERRA UNIVERSAL 1529-20-1 10-DOOR STAINLESS STEEL MOBILE DESSICATOR CABINET (10 DOOR) WITH BLOWER

109
RFPP MODEL 7621985010 AM - 30 ACI RF POWER SUPPLY 13.56MHZ 3KW

110
ALCATEL ACT 1000M TURBO PUMP CONTROLLER

112
ALCATEL CFV900 TURBO PUMP CONTROLLER

113
ALCATEL CFV900 TURBO PUMP CONTROLLER

114
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

115
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

116
ALCATEL CERAMIC PTM 5900 TURBO PUMP

117
ALCATEL CERAMIC XXXXX TURBO PUMP

118
ALCATEL CERAMIC PTM 5400 TURBO PUMP

119
POSITRONIC A214284 / 104587 / 98-46-CS TURBO PUMP CABLE

120
AutoEL NIR-3 S52,4E AUTOMATIC ELLIPSOMETER

121
AFFINITY FAA-015C-DD13CA CHILLER

122
VARIAN 323-0012 21 HIGH VACUUM CRYO COMPRESSOR PUMP

123
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

124
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

125
HP Z840 TOWER PC WORKSTATION

126
APPLIED BIOSYSTEMS 4000 SERIES CYTOFLUOR MULTI NEW PLATE READER

127
TBD

128
POWER TEN P63C-15220AB DC POWER SUPPLY

129
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

130
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

131
APPLIED MATERIALS PART # 0090-98103 POWER SUPPLY

132
APPLIED MATERIALS 265 SCAN AMP SLAVE

133
POWER TEN P63C-10660AB DC POWER SUPPLY

134
EMI | ELECTRONIC POWER MEASUREMENTS ESS-160-62-2-2-0806 TCR POWER SUPPLY

135
TBD

136
GLASSMAN HIGH VOLTAGE SERIES WX PS/NX 10N100 POWER SUPPLY

137
POWER TEN P63C-20660AB DC POWER SUPPLY

138
POWER TEN P63C-15220AB DC POWER SUPPLY

139
POWER TEN P63C-10660AB DC POWER SUPPLY

140
265 SCAN AMP SLAVE

141
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

142
LOT (2) CTI-CRYOGENICS 804307 218|98 L G300 260 PSI STAINLESS PRESSURIZED BRAID HOSE

143
LOT (4) INTEGRA SPECIALIZED 12" WAFER HOLDERS | CASSETTE TRAYS

144
APC 3000 SMART UPS

145
LOT (6) ASSORTED FICO SYNTRONIX MOLDING BASE SYSTEMS

146
TBD

147
LOT (3) CONSITING OF: (1) EXPRESS TEST TB88-TQFP-160-0.5-RP-6PL & (2) 48 DIP/28DIP MOTHER BOARDS

148
BETTER PACK 333 PACKING TAPE DISPENSER

149
AMERICAN INTER ELECTRIC AIE 300 IMPULSE SEALER

150
ACCU-SEAL VACCUM SEALER

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

AUDIX

Equipment Dispositions

Equipment Dispositions


Contact:
Phone: 408-402-2436
Sale Location
Wilsonville
, OR
Sale Dates and Times
Sale Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.

Listing Details

1
ALCATEL 620B 2 CHAMBER SPUTTERING SYSTEM - WILSONVILLE, OR
ALCATEL 620B SPUTTERING SYSTEM | MEIVAC 602 PVD SPUTTER / COATER | Alcatel 620B 2-Chamber Sputtering System | New in Original Crates (The system consists of 13 crates), To Include: CTI 9600 Compres...

1
SPUTTERED FILMS INC. SFI 5 (SHAMROCK) Single Chamber Sputtering | Deposition System - Wilsonville, OR

1
CTI-CRYOGENICS ON BOARD WATER PUMP # 8116345G001R

1
MRC SPUTTERING SYSTEM - Wilsonville, OR

2
CTI-CRYOGENICS ON BOARD CRYO PUMP
CTI-CRYOGENICS ON BOARD WATER PUMP

3
SEREN 1000 WATT 13.56MHZ INDUSTRIAL POWER SYSTEM MODEL R10001

4
VAT VALVE

5
CTI-CRYOGENICS MODEL 8011 CONTROLLER

6
RFPP 15000 WATT 13.56 MHZ MODEL 7800003030 RF GENERATOR | RF POWER SUPPLY | TRANSFORMER

7
TENNEY JR. BENCHTOP ENVIRONMENTAL TEST CHAMBER

8
DAGE SERIES 3000 100G BOND TESTER

9
KULICKE & SOFFA MODEL 1472 AUTOMATIC WIRE BONDER

10
KULICKE & SOFFA MODEL 1484 WIRE BONDER

11
KULICKE & SOFFA MODEL 1484 WIRE BONDER

12
ASM MODEL 60AP "EAGLE" WIRE BONDER

13
TEMPTRONIC MODEL TPO412A-2-60 TEMPERATURE FORCING SYSTEM

14
THERMONICS T-2800 TEMPERATURE FORCING SYSTEM
THERMONICS T-2800 PRECISION TEMPERATURE FORCING SYSTEM

15
LOT (2) TEMPTRONICS TPP4010A TEMPERATURE FORCING SYSTEMS

16
MKS 270 SIGNAL CONDITIONER

17
MKS 270 SIGNAL CONDITIONER

18
RFPP 7004-0100-5 CONTROLLER

19
RFPP 7004-0100-5 CONTROLLER

20
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR

21
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR - (MOBILE CART INCLUDED)

22
NESLAB MODEL CFT-33 REFRIDGERATED RECIRCULATING CHILLER

23
SOUTHCOAST INDUSTIRIES MOBILE HAZMAT STORAGE CABINET

24
GENMARK GENCOBOT R92130004-4 ROBOT

25
HIPOTRONIX HD 100 SERIES HI POT TESTER

26
HUTTINGER ELEKTRONIK 952236 2000W DC POWER SUPPLY

27
KSI SERIES 5000 POWER SUPPLY

28
SEREN MC2 S5-5-1000 MATCHING NEWTORK CONTROLLER

29
GENMARK GENCOBOT ROBOT

30
RFPP | AE | ADVANCED ENERGY RF20H 75000000/0 RF GENERATOR

31
HEWLETT PACKARD | HP | AGILENT 4145A SEMICONDUCTOR ANALYZER

32
ADIXEN | ALCATEL ACP 15G DRY PUMP

33
ADIXEN | ALCATEL ACP 15G DRY PUMP

34
ADIXEN | ALCATEL ACP 15G DRY PUMP

35
ADIXEN | ALCATEL ACP 15G DRY PUMP

36
STRATAGENE EAGLE EYE II IMAGING SYSTEM (PARTS)

37
NOVA BIOMEDICAL 300 BIOPROFILE AUTOMATED CHEMISTRY ANALYZER

38
WATERS FRACTION COLLECTOR III 186001878 STANDALONE COLLECTOR

39
QUINCY LAB 10GC 0.7CF GRAVITY CONVECTION OVEN

40
CALIFORNIA AIR TOOL CAT# 1610A TURBO BL OIL FREE ULTRA QUIET AIR COMPRESSOR

41
INSTRUMENT TRANFORMERS INC. 4160 CONTROL POWER TRANFORMER 120-240V 60HZ

42
INTEREX PCS-21OTF SURGE SLAYER

43
THERMO LINDBERG BLUE M ULTRASONIC WATER BATH

44
THERMO LINDBERG BLUE M RWB3 22OA-2 RECIRCULATING CHILLER

45
MILLIPORE MILLI-Q GRADIANT AIO UV ULTR VIOLET WATER PURIFICATION SYSTEM

46
POLARIS ARRAYIT MICRO ARRAY

47
TEMPTRONIC CONTOLLER

48
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

49
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

50
ADVANCE HIVOLT HITEK POWER OL8000/104/28

51
ADVANCE HIVOLT HITEK POWER OL8000/104/28

52
LOT SEMEQUIP & BUCKLEY SYSTEMS - ION IMPLANTATION SUBSYTEM E17227241 W SEMEQUIP P/N 010-000082

53
HVA 8" GATE VALVE

54
HVA 10" GATE VALVE

55
HVA 10" GATE VALVE

56
BLANK

57
ADVANCE HIVOLT HITEK POWER 1140-98035 CONVERTER HIGH VOLTAGE POWER SUPPLY PARTS

58
ADVANCE HIVOLT HITEK POWER 1140-98020 HIGH VOLTAGE DC POWER SUPPLY

59
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

60
APPLIED MATERIALS | AMAT PART

61
HEWLETT PACKARD | HP | AGILENT 1663C LOGIC ANALYZER OPT 015

62
POWER TEN P63C-50200AB DC POWER SUPPLY

63
POWER TEN P63C-50200AB DC POWER SUPPLY

64
POWER TEN P63C-40166AB DC POWER SUPPLY

65
POWER TEN P63C-60166AB DC POWER SUPPLY

66
POWER TEN P63C-20330AB DC POWER SUPPLY

67
POWER TEN P63C-20330AB DC POWER SUPPLY

68
POWER TEN P63C-30220AB DC POWER SUPPLY

69
BERKELEY H9605 HOT CARRIER STRESS TEST FIXTURE

70
ADVANCE HIVOLT HITEK POWER 0180001104121 8000 SERIES CONTROL UNIT

71
BLICKMAN 179-053 STAINLESS STEEL 2-GLOVE LABORATORY GLOVEBOX

72
US STONEWARE M932120DC JAR MILL

73
WYATT DAWN DSP LASER PHOTOMETER

74
ELECTRIC INSTRUMENTS LTD 29" 20 MILLION MEGOHMMETTER

75
PHARMACIA P3500 TABLETOP HPLC PUMP

76
MILLIPORE CYTOFLUOR 2300 FLOURESCENCE MEASUREMENT SYSTEM

77
ORION 101 CONDUCTIVITY METER

78
TECAN HYDROFLEX MICRO PLATE WASHER

79
OLYMPUS TGH VARIABLE POWER SUPPLY

80
APPLIED BIOSYSTEMS 2720 THERMAL CYCLER

81
MOLECULAR DEVICES THRESHOLD AUXILIARY MANIFOLD

82
3M 9100 OVERHEAD PROJECTOR

83
RFPP MODEL 7004-0100-5 RF CONTROLLER

84
RFPP AMNPS-2A RF CONTROLLER

85
RFPP AMNPS-2A RF CONTROLLER

86
HARRISON 880A REGULATED POWER SUPPLY

87
RICOR B53401001 CRYOCOOLER

88
PE PERKINELMER APPLIED BIOSYSTEMS GENEAMP 9700 PCR SYSTEM

89
OLYMPUS PM-CBAD EXPOSURE CONTROL UNIT

90
INVITROGEN BENCH PRO 4100 CARD PROCESSING STATION

91
SAVANT DP100 VACUUM PUMP

92
ORIEL 87301 DETECTION SYSTEM

93
TOMY SEIKO HF-120

94
WEST BOND 7416A-26-32-45 PRECISION WEDGE WIRE BONDER WITH BAUSCH & LOMB MICROSCOPE

95
WEST BOND 1200A CONTROLLER WITH WITH BASE & BAUSCH & LOMB STEREOZOOM 4 MICROSCOPE

96
INVERTED TISSUE CULTURE MICRO-SCOPE PARTS

97
WHITEY 0266-5391-0 3-WAY VALVE

98
ADVANCED ENERGY | AE APEX 3013 RF 13.56 POWER GENERATOR

99
AMCC EV488S EVB EVALUATION BOARD

100
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

101
ALCATEL CFV-900 TURBO CONTROLLER

102
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

103
ALCATEL E0373 / GBB-SF ROBOT

104
LEYBOLD TRIVAC B CAT # 10245/46/55 56 ROTARY VANE VACUUM PUMP S/D 4 84

105
TBD

106
LEYBOLD 400036V0002 DRIVE BEARING CABLE 10M REV AA CONVERTER

107
ALCATEL 5900 CP 400-01114 TURBO SPINDLE ASSEMBLY

108
TERRA UNIVERSAL 1529-20-1 10-DOOR STAINLESS STEEL MOBILE DESSICATOR CABINET (10 DOOR) WITH BLOWER

109
RFPP MODEL 7621985010 AM - 30 ACI RF POWER SUPPLY 13.56MHZ 3KW

110
ALCATEL ACT 1000M TURBO PUMP CONTROLLER

112
ALCATEL CFV900 TURBO PUMP CONTROLLER

113
ALCATEL CFV900 TURBO PUMP CONTROLLER

114
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

115
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

116
ALCATEL CERAMIC PTM 5900 TURBO PUMP

117
ALCATEL CERAMIC XXXXX TURBO PUMP

118
ALCATEL CERAMIC PTM 5400 TURBO PUMP

119
POSITRONIC A214284 / 104587 / 98-46-CS TURBO PUMP CABLE

120
AutoEL NIR-3 S52,4E AUTOMATIC ELLIPSOMETER

121
AFFINITY FAA-015C-DD13CA CHILLER

122
VARIAN 323-0012 21 HIGH VACUUM CRYO COMPRESSOR PUMP

123
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

124
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

125
HP Z840 TOWER PC WORKSTATION

126
APPLIED BIOSYSTEMS 4000 SERIES CYTOFLUOR MULTI NEW PLATE READER

127
TBD

128
POWER TEN P63C-15220AB DC POWER SUPPLY

129
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

130
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

131
APPLIED MATERIALS PART # 0090-98103 POWER SUPPLY

132
APPLIED MATERIALS 265 SCAN AMP SLAVE

133
POWER TEN P63C-10660AB DC POWER SUPPLY

134
EMI | ELECTRONIC POWER MEASUREMENTS ESS-160-62-2-2-0806 TCR POWER SUPPLY

135
TBD

136
GLASSMAN HIGH VOLTAGE SERIES WX PS/NX 10N100 POWER SUPPLY

137
POWER TEN P63C-20660AB DC POWER SUPPLY

138
POWER TEN P63C-15220AB DC POWER SUPPLY

139
POWER TEN P63C-10660AB DC POWER SUPPLY

140
265 SCAN AMP SLAVE

141
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

142
LOT (2) CTI-CRYOGENICS 804307 218|98 L G300 260 PSI STAINLESS PRESSURIZED BRAID HOSE

143
LOT (4) INTEGRA SPECIALIZED 12" WAFER HOLDERS | CASSETTE TRAYS

144
APC 3000 SMART UPS

145
LOT (6) ASSORTED FICO SYNTRONIX MOLDING BASE SYSTEMS

146
TBD

147
LOT (3) CONSITING OF: (1) EXPRESS TEST TB88-TQFP-160-0.5-RP-6PL & (2) 48 DIP/28DIP MOTHER BOARDS

148
BETTER PACK 333 PACKING TAPE DISPENSER

149
AMERICAN INTER ELECTRIC AIE 300 IMPULSE SEALER

150
ACCU-SEAL VACCUM SEALER

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
AUDIX
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Sep 22 , 06:49 PM
Bidding Ends: Wednesday Dec 2 , 02:00 PM
Sale Location

, OR
Listing Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


1
ALCATEL 620B 2 CHAMBER SPUTTERING SYSTEM - WILSONVILLE, OR
ALCATEL 620B SPUTTERING SYSTEM | MEIVAC 602 PVD SPUTTER / COATER | Alcatel 620B 2-Chamber Sputtering System | New in Original Crates (The system consists of 13 crates), To Include: CTI 9600 Compres...

1
SPUTTERED FILMS INC. SFI 5 (SHAMROCK) Single Chamber Sputtering | Deposition System - Wilsonville, OR

1
CTI-CRYOGENICS ON BOARD WATER PUMP # 8116345G001R

1
MRC SPUTTERING SYSTEM - Wilsonville, OR

2
CTI-CRYOGENICS ON BOARD CRYO PUMP
CTI-CRYOGENICS ON BOARD WATER PUMP

3
SEREN 1000 WATT 13.56MHZ INDUSTRIAL POWER SYSTEM MODEL R10001

4
VAT VALVE

5
CTI-CRYOGENICS MODEL 8011 CONTROLLER

6
RFPP 15000 WATT 13.56 MHZ MODEL 7800003030 RF GENERATOR | RF POWER SUPPLY | TRANSFORMER

7
TENNEY JR. BENCHTOP ENVIRONMENTAL TEST CHAMBER

8
DAGE SERIES 3000 100G BOND TESTER

9
KULICKE & SOFFA MODEL 1472 AUTOMATIC WIRE BONDER

10
KULICKE & SOFFA MODEL 1484 WIRE BONDER

11
KULICKE & SOFFA MODEL 1484 WIRE BONDER

12
ASM MODEL 60AP "EAGLE" WIRE BONDER

13
TEMPTRONIC MODEL TPO412A-2-60 TEMPERATURE FORCING SYSTEM

14
THERMONICS T-2800 TEMPERATURE FORCING SYSTEM
THERMONICS T-2800 PRECISION TEMPERATURE FORCING SYSTEM

15
LOT (2) TEMPTRONICS TPP4010A TEMPERATURE FORCING SYSTEMS

16
MKS 270 SIGNAL CONDITIONER

17
MKS 270 SIGNAL CONDITIONER

18
RFPP 7004-0100-5 CONTROLLER

19
RFPP 7004-0100-5 CONTROLLER

20
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR

21
ADVANCED ENERGY | AE | RFPP MODEL RF20H RF GENERATOR - (MOBILE CART INCLUDED)

22
NESLAB MODEL CFT-33 REFRIDGERATED RECIRCULATING CHILLER

23
SOUTHCOAST INDUSTIRIES MOBILE HAZMAT STORAGE CABINET

24
GENMARK GENCOBOT R92130004-4 ROBOT

25
HIPOTRONIX HD 100 SERIES HI POT TESTER

26
HUTTINGER ELEKTRONIK 952236 2000W DC POWER SUPPLY

27
KSI SERIES 5000 POWER SUPPLY

28
SEREN MC2 S5-5-1000 MATCHING NEWTORK CONTROLLER

29
GENMARK GENCOBOT ROBOT

30
RFPP | AE | ADVANCED ENERGY RF20H 75000000/0 RF GENERATOR

31
HEWLETT PACKARD | HP | AGILENT 4145A SEMICONDUCTOR ANALYZER

32
ADIXEN | ALCATEL ACP 15G DRY PUMP

33
ADIXEN | ALCATEL ACP 15G DRY PUMP

34
ADIXEN | ALCATEL ACP 15G DRY PUMP

35
ADIXEN | ALCATEL ACP 15G DRY PUMP

36
STRATAGENE EAGLE EYE II IMAGING SYSTEM (PARTS)

37
NOVA BIOMEDICAL 300 BIOPROFILE AUTOMATED CHEMISTRY ANALYZER

38
WATERS FRACTION COLLECTOR III 186001878 STANDALONE COLLECTOR

39
QUINCY LAB 10GC 0.7CF GRAVITY CONVECTION OVEN

40
CALIFORNIA AIR TOOL CAT# 1610A TURBO BL OIL FREE ULTRA QUIET AIR COMPRESSOR

41
INSTRUMENT TRANFORMERS INC. 4160 CONTROL POWER TRANFORMER 120-240V 60HZ

42
INTEREX PCS-21OTF SURGE SLAYER

43
THERMO LINDBERG BLUE M ULTRASONIC WATER BATH

44
THERMO LINDBERG BLUE M RWB3 22OA-2 RECIRCULATING CHILLER

45
MILLIPORE MILLI-Q GRADIANT AIO UV ULTR VIOLET WATER PURIFICATION SYSTEM

46
POLARIS ARRAYIT MICRO ARRAY

47
TEMPTRONIC CONTOLLER

48
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

49
BRINKMAN INSTRUMENTS | EPPENDORF 5415C BENCHTOP MINI CENTRIFUGE

50
ADVANCE HIVOLT HITEK POWER OL8000/104/28

51
ADVANCE HIVOLT HITEK POWER OL8000/104/28

52
LOT SEMEQUIP & BUCKLEY SYSTEMS - ION IMPLANTATION SUBSYTEM E17227241 W SEMEQUIP P/N 010-000082

53
HVA 8" GATE VALVE

54
HVA 10" GATE VALVE

55
HVA 10" GATE VALVE

56
BLANK

57
ADVANCE HIVOLT HITEK POWER 1140-98035 CONVERTER HIGH VOLTAGE POWER SUPPLY PARTS

58
ADVANCE HIVOLT HITEK POWER 1140-98020 HIGH VOLTAGE DC POWER SUPPLY

59
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

60
APPLIED MATERIALS | AMAT PART

61
HEWLETT PACKARD | HP | AGILENT 1663C LOGIC ANALYZER OPT 015

62
POWER TEN P63C-50200AB DC POWER SUPPLY

63
POWER TEN P63C-50200AB DC POWER SUPPLY

64
POWER TEN P63C-40166AB DC POWER SUPPLY

65
POWER TEN P63C-60166AB DC POWER SUPPLY

66
POWER TEN P63C-20330AB DC POWER SUPPLY

67
POWER TEN P63C-20330AB DC POWER SUPPLY

68
POWER TEN P63C-30220AB DC POWER SUPPLY

69
BERKELEY H9605 HOT CARRIER STRESS TEST FIXTURE

70
ADVANCE HIVOLT HITEK POWER 0180001104121 8000 SERIES CONTROL UNIT

71
BLICKMAN 179-053 STAINLESS STEEL 2-GLOVE LABORATORY GLOVEBOX

72
US STONEWARE M932120DC JAR MILL

73
WYATT DAWN DSP LASER PHOTOMETER

74
ELECTRIC INSTRUMENTS LTD 29" 20 MILLION MEGOHMMETTER

75
PHARMACIA P3500 TABLETOP HPLC PUMP

76
MILLIPORE CYTOFLUOR 2300 FLOURESCENCE MEASUREMENT SYSTEM

77
ORION 101 CONDUCTIVITY METER

78
TECAN HYDROFLEX MICRO PLATE WASHER

79
OLYMPUS TGH VARIABLE POWER SUPPLY

80
APPLIED BIOSYSTEMS 2720 THERMAL CYCLER

81
MOLECULAR DEVICES THRESHOLD AUXILIARY MANIFOLD

82
3M 9100 OVERHEAD PROJECTOR

83
RFPP MODEL 7004-0100-5 RF CONTROLLER

84
RFPP AMNPS-2A RF CONTROLLER

85
RFPP AMNPS-2A RF CONTROLLER

86
HARRISON 880A REGULATED POWER SUPPLY

87
RICOR B53401001 CRYOCOOLER

88
PE PERKINELMER APPLIED BIOSYSTEMS GENEAMP 9700 PCR SYSTEM

89
OLYMPUS PM-CBAD EXPOSURE CONTROL UNIT

90
INVITROGEN BENCH PRO 4100 CARD PROCESSING STATION

91
SAVANT DP100 VACUUM PUMP

92
ORIEL 87301 DETECTION SYSTEM

93
TOMY SEIKO HF-120

94
WEST BOND 7416A-26-32-45 PRECISION WEDGE WIRE BONDER WITH BAUSCH & LOMB MICROSCOPE

95
WEST BOND 1200A CONTROLLER WITH WITH BASE & BAUSCH & LOMB STEREOZOOM 4 MICROSCOPE

96
INVERTED TISSUE CULTURE MICRO-SCOPE PARTS

97
WHITEY 0266-5391-0 3-WAY VALVE

98
ADVANCED ENERGY | AE APEX 3013 RF 13.56 POWER GENERATOR

99
AMCC EV488S EVB EVALUATION BOARD

100
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

101
ALCATEL CFV-900 TURBO CONTROLLER

102
GRANVILLE PHILLIPS 307 VACUUM GAUGE CONTROLLER

103
ALCATEL E0373 / GBB-SF ROBOT

104
LEYBOLD TRIVAC B CAT # 10245/46/55 56 ROTARY VANE VACUUM PUMP S/D 4 84

105
TBD

106
LEYBOLD 400036V0002 DRIVE BEARING CABLE 10M REV AA CONVERTER

107
ALCATEL 5900 CP 400-01114 TURBO SPINDLE ASSEMBLY

108
TERRA UNIVERSAL 1529-20-1 10-DOOR STAINLESS STEEL MOBILE DESSICATOR CABINET (10 DOOR) WITH BLOWER

109
RFPP MODEL 7621985010 AM - 30 ACI RF POWER SUPPLY 13.56MHZ 3KW

110
ALCATEL ACT 1000M TURBO PUMP CONTROLLER

112
ALCATEL CFV900 TURBO PUMP CONTROLLER

113
ALCATEL CFV900 TURBO PUMP CONTROLLER

114
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

115
ALCATEL ATH 1000M TURBO PUMP CONTROLLER

116
ALCATEL CERAMIC PTM 5900 TURBO PUMP

117
ALCATEL CERAMIC XXXXX TURBO PUMP

118
ALCATEL CERAMIC PTM 5400 TURBO PUMP

119
POSITRONIC A214284 / 104587 / 98-46-CS TURBO PUMP CABLE

120
AutoEL NIR-3 S52,4E AUTOMATIC ELLIPSOMETER

121
AFFINITY FAA-015C-DD13CA CHILLER

122
VARIAN 323-0012 21 HIGH VACUUM CRYO COMPRESSOR PUMP

123
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

124
BGI NEXT GENERATION BGI SEQ-500 SEQUENCING SYSTEM

125
HP Z840 TOWER PC WORKSTATION

126
APPLIED BIOSYSTEMS 4000 SERIES CYTOFLUOR MULTI NEW PLATE READER

127
TBD

128
POWER TEN P63C-15220AB DC POWER SUPPLY

129
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

130
GLASSMAN HIGH VOLTAGE POWER SUPPLY | EW60P10-DM21 DIRECT CURRENT POWER SUPPLY

131
APPLIED MATERIALS PART # 0090-98103 POWER SUPPLY

132
APPLIED MATERIALS 265 SCAN AMP SLAVE

133
POWER TEN P63C-10660AB DC POWER SUPPLY

134
EMI | ELECTRONIC POWER MEASUREMENTS ESS-160-62-2-2-0806 TCR POWER SUPPLY

135
TBD

136
GLASSMAN HIGH VOLTAGE SERIES WX PS/NX 10N100 POWER SUPPLY

137
POWER TEN P63C-20660AB DC POWER SUPPLY

138
POWER TEN P63C-15220AB DC POWER SUPPLY

139
POWER TEN P63C-10660AB DC POWER SUPPLY

140
265 SCAN AMP SLAVE

141
ADVANCE HIVOLT HITEK POWER 0L8000104 CONVERTER | HIGH VOLTAGE DC POWER SUPPLY

142
LOT (2) CTI-CRYOGENICS 804307 218|98 L G300 260 PSI STAINLESS PRESSURIZED BRAID HOSE

143
LOT (4) INTEGRA SPECIALIZED 12" WAFER HOLDERS | CASSETTE TRAYS

144
APC 3000 SMART UPS

145
LOT (6) ASSORTED FICO SYNTRONIX MOLDING BASE SYSTEMS

146
TBD

147
LOT (3) CONSITING OF: (1) EXPRESS TEST TB88-TQFP-160-0.5-RP-6PL & (2) 48 DIP/28DIP MOTHER BOARDS

148
BETTER PACK 333 PACKING TAPE DISPENSER

149
AMERICAN INTER ELECTRIC AIE 300 IMPULSE SEALER

150
ACCU-SEAL VACCUM SEALER