CUMULUS ENERGY STORAGE
Listing ID#: 357750

Sale Location

Gilroy, CA 95020
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Saturday Oct 24, 02:00 PM
Bidding Ends: Thursday Dec 10, 02:00 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Equipment Dispositions

Phone: 408-402-2436
Email: jr@edispositions.com
Website: edispositions.com

EstateSale.com ID#: 10990
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

TERMS AND CONDITIONS


 



  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  

  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.

  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.

  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.

  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.

  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.

  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.

  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.

  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.

  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 

  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  

  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.

  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.

  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.

  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.

  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.

  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.

  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.

  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.

  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.

  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.

  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.

  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 

  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 

  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 

  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.

  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.

  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


Listing Information

1
AGILENT 1260 INFINITY SERIES HPLC STACK
AGILENT 1260 INFINITY SERIES HPLC STACK W COMPUTER

2
AGILENT 5100 ICP-OES SPECTROMETER
AGILENT 5100 ICP-OES SPECTROMETER

3
BRUKER VERTEX 70 FT-IR SPECTROMETER

4
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM W METROHM 858 PROFESSIONAL SAMPLE PROCESSOR

5
CHROMA ATE CHROMA 17020 REGENERATIVE BATTERY PACK TEST SYSTEM CHROMA DC|AC A691101 BI DIRECTIONAL CONVERTER - CHROMA 69206-66-8 REGENERATIVE CHARGE | DISCHARGE TESTER - ADVANTECH INDUSTRIAL COMPUTER

6
IKA RTC B S001 ELECTRONIC SCALE

7
COLE PARMER MASERFLEX LS 7550-50 COMPUTERIZED DRIVE PUMP

8
CORNING 440826 LAB STIRRER

9
NEW ERA PUMP SYSTEMS NE4000 PROGRAMMABLE MICROFLUIDICS SYRINGE

10
PERKINELMER || PERKIN ELMER PLATE WASH PLUS AUTOMATED MICROPLATE SYSTEM

11
J-KEM SCIENTIFIC GEMENI DUAL TEMPERATURE CONTROLLER

12
INSTRUMENTS FOR RESEARCH & INDUSTRY 26-1000SS THERM-O-WATCH VARIABLE VOLTAGE & TEMPERATURE CONTROLLER

13
CAMBRIDGE SENSOTEC RAPID XR2000

14
ACE GLASS CAT 12087 LINE VOLTAGE CONTROLLER (NEW)

15
EUTECH OAKTON PH5+ REMOTE PH METER

16
NEW ERA PUMP SYSTEMS NE90004C PROGRAMMABLE MICROFLUIDICS SYRINGE

17
MIDWEST PACIFIC MP12 IMPULSE HEAT SEALER

18
TBD

19
METTLER TOLEDO ACS AT250 BALANCE | SCALE

20
PG INSTRUMENTS T70+ UV|VIS SPECTROMETER

21
METTLER TOLEDO XP2002 ELECTRONIC BALANCE | SCALE

22
COLE PARMER MASERFLEX LS 7521-40 CONSOLE DRIVE

23
BK PRECISION 5460 MULTIMETER

24
PRECISION 280 SERIES MICRO PROCESSOR CONTROLLED WATER BATH

25
IKA C-MAG HS 7 HOT PLATE

26
DATA PRECISION 1750 DIGITAL MULTIMETER

27
AGILENT 34401A 6 1/2 DIGITAL MULTIMETER

28
POWERVAC 8.3 ABC830-II POWER CONDICTIONER SET WITH (1) EDAQ PTV 510 E-CORDER (1) EDAQ 168 QUAD AMP PH|MV (1) EDAQ 164 QUAD STAT (1) EDAQ EA162 POTENTIOSTAT (5) EDAQ ET306 THERMOCOUPLE POD

29
PRINCETON APPLIED RESEARCH 263A POTENTIOSTAT | GALVANOSTAT

30
TORIOD ISB-100W MEDICAL GRADE ISOLATION TRANSFORMER

31
BAXTER VIS 400 -NL IRRIGATION PUMP

32
LENOVO THINK CENTRE M73 MINI PC

33
PRINCETON APPLIED RESEARCH AMETEK PARSTAT 4000 POTENTIOSTAT EIS ANALYZER

34
TEKTRONIX 7854 OSCILLOSCOPE

35
PRINCETON APPLIED RESEARCH PARSTAT 2273 ADVANCED ELECTRO - CHEMISTRY SYSTEM

36
KEPCO JQE 55-2M POWER SUPPLY (1) LEADER LS-5 ELECTRONIC SWITCH

37
MITSIBISHI CP750U PRINTER WITH PRINTER PAPER

38
INVITROGEN BENCHPRO 4100 CARD PROCESSING STATION

39
IONPURE IP - LXM30X-3 ELECTRO DEIONIZATION SYSTEM

40
ROHDE & SCHWARZ SSCU-GW SWITCHING SIGNAL CONDITIONING UNIT MOD. 1158.577.04

41
ROHDE & SCHWARZ ASCU GSM 900 MS ADVANCED SIGNALING CONDITIONING UNIT MOD. 1158.6396.02

42
SPIRENT SR3410 WCDMA NETWORK EMULATOR

43
NATIONAL INSTRUMENTS GPIB-120A BUS EXTENDER | ISOLATOR

44
VAT GATE VALVE # 02010-AA24-AKA 10023 A-23521

45
ZEBRA 170 Xi III PLUS LABEL PRINTER

46
AGILENT | HP 3456A DIGITAL MULTIMETER

47
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

48
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

49
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

50
AGILENT | HP E3614A 0-8V, 0-6A DC POWER SUPPLY

51
BK PRECISION 5419A 5000 COUNT MULTIMETER

52
EMI | LAMBDA EMS-60-10 POWER SUPPLY

53
EMI | LAMBDA EMS-60-10 POWER SUPPLY

54
EMI | LAMBDA TCR POWER SUPPLY # 00470900

55
EMI | LAMBDA TCR POWER SUPPLY # 00470900

56
CHROMA 63472 HIGH SLEW RATE LOAD CONTROL & MEASUREMENT SYSTEM

57
BAXTER SCIENTIFIC PRODUCTS ULTRA-TECH WJ 301D INCUBATOR

58
SAVANT OVS-400 UNIVERSAL VACUUM SYSTEM CENTRIFUGE

59
JULABO FP50 RECIRCULATING CHILLER W JULABO MH CONTROLLER

60
JULABO FE500 THERMO ELECTRIC FOR CCS MODELS REFRIDGERATED COOLING CIRCULATOR

61
AGILENT TECHNOLOGIES MOD. G8481A RECIRCULATING CHILLER

62
PRECISION 180 SERIES WATER BATH

63
BUCHI ROTAVAPOR R-114 | ROTARY EVAPORATOR

64
IKA RV10 DIGITAL V CONTROLLED ROTOVAPOR EVAPORATOR

65
IKA WERKE RET BASIC HOT PLATE

66
FISCHER SCIENTIFIC ISOTEMP HOT PLATE

67
THERMO SCIENTIFIC CIRMATEC HOT PLATE

68
COLE PARMER MASTERFLEX LS PERISTALTIC PUMP 7550-30 WITH MASTERFLEX DRIVE PUMP

69
CINCINNATI ELECTROSYSTEMS INC. TOUCHVIEW GRAPHIC FLAT PANEL TOUCHSCREEN

70
PERKINELMER | PERKIN ELMER | ANTON PAAR MULTIWAVE 3000 MULTIWAVE REACTION SYSTEM

71
BARNSTEAD DIAMOND RO # D12571 REVERSE OSMOSIS WATER PURICATION SYSTEM

72
SARTORIUS DIGITAL BALANCE | DIGITAL SCALE

73
FRANKEN PDU POWER DISTRIBUTION UNIT

74
HERAEUS MICROFUGE 10 CENTRIFUGE

75
AGILENT | HP 8770A AWS ARBITRARY WAVEFORM SYNTHESIZER 125MHZ SAMPLING RATE

76
MASTECH HY6020EX POWER SUPPLY

77
KEPCO BIPOLAR OPERATIONAL POWER SUPPLY

78
ALLEN BRADLEY PWERFLEX 70 VARIABLE FREQUENCY DRIVE

79
VWR MINI INCUBATOR

80
PRECISION SHALLOW FORM SHAKING WATER BATH

81
TREE MLT PLUS COUNTING SCLALE

82
HEWLETT PACKARD 78173B FETAL MONITOR

83
MICROTECHNICAL INDUSTRIES THERMO PROBE MODEL 105A-1

84
LOT (4) MASTERFLEX PUMP DRIVES

85
LOT (3) FISCHER SCIENTIFIC | CONTROL COMPANY MINI PUMP VARIABLE FLOW

86
METACHEM DEGASSIT MODEL 6324 SOLVENT DEGASSER

87
LOT (2) VARIABLE AUTOTRANSFORMES

88
ACE LINE VOLTAGE CONTROLLER

89
NATIONAL INSTRUMENTS DAQPAD-6020E

90
THERMO ELECTRON EC 105 MODEL 105ECA-115 OWL COMPACT DC POWER SUPPLY

91
MISCL. (2) OMEGA DIGITAL READ OUT | CONTROLLERS

92
DESCO BENCHTOP IONIZER

93
BOEKEL SCIENTIFIC MODEL 260350 ROCKER

94
ABB TB84 PH/ORP/PION DIGITAL TRANSMITTER

95
IKA TOPOLINO SI MINI HOT PLATE

96
LABORATORY DEVICES MEL-TEMP 3.0 CAPILLARY MELTING POINT APPARATUS

97
DAN KAR ELECTROPHORESIS POWER SUPPLY

98
LOT (2) POPE MOD. 8621 1900ML VACUUM DEWAR | FLASK | JAR

99
DIMLO GRAY UNIVERSAL LAB TIMER

100
COLE PARMER MOD. H-08376-20 CHART RECORDER

101
CHICAGO SURGICAL ELECTRICAL MED. 13100 WATER BATH

102
LABLINE WATER BATH

103
COLE PARMER MASTERFLEX LS DIGITAL ECONOMY PERISTALTIC PUMP 7524-40

104
DYNEX ULTRAWASH PLUS MICRO- PLATE WASHER

105
SPARK HOLLAND BV FAMOS ENDURANCE AUTOSAMPLER

106
TEKMAR 14-16001-800

107
TRANSGENOMIC QWX PUMP

108
SKANTRON MOLECULAR DEVICES SCAN WASHER - SKANSTACKER 300 MICRO-PLATE WASHER - COMES WITH 2 PLATE STACKS

109
HP 3396A INTEGRATOR & (1) WELLER WSL SOLDERING BASE

110
LOT (5) SCIENTIFIC INSTRUMENTS AQUA TRAP 410-10

111
POWER DESIGNS TP343A TRIPLE OUTPUT DC POWER SUPPLY

112
BARNSTEAD THERMOLYNES SL7225 STIR LIGHT STIRRER

113
KIKUSUI PLZ 300W ELECTRIC LOAD

114
HP 54600B 100MHZ OSCILLOSCOPE

115
INSTRUMENTS FOR RESEARCH AND INDUSTRY THERMOWATCH L6-1000SS

116
BEL MERIT FG140 LOW DISTORTION FUNCTION GENERATOR

117
LAMOTTE SMART 2 COLORIMETER

118
HIOS CLT-50 POWER SUPPLY W CL7000 PNEUMATIC GUN

119
CHARLES WATER AUTO-SET ION PUMP

120
BLOCK-TRAFO JET 1000 TRANSFORMER

121
BK PRECISION 1635 DC POWER SUPPLY

122
TRIPP-LITE SMART 700 RM UPS

123
EMC | ELECTRONIC MEASUREMENTS TCR 40S25-1-4 POWER SUPPLY

124
LOT (3) KEPCO JQE 55-2M POWER SUPPLY

125
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

126
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

127
KEPCO BOP-20 BOP-20-20M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

128
KEPCO BOP-36 -12M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

129
HP | AGILENT 6433B DC POWER SUPPLY

130
HP | AGILENT 6433B DC POWER SUPPLY

131
HP | AGILENT 6433B DC POWER SUPPLY

132
HP | AGILENT 6261B DC POWER SUPPLY

133
ELECTRONIC MEASUREMENTS INC. | EMI TCR POWER SUPPLY

134
BAKER COMPANY ANIGARD VF MOBILE VERTICLE CIRCULATION FLOW HOOD

135
FURMA SCIENTIFIC 3326 WATER JACKETED CO2 DUAL STACKABLE LAB INCUBATOR

136
TBD

137
LEISTER NOVOLABS BASIC AT INDUSTRIAL LAZER WELDING SYSTEM

138
SPEEDLINE ELECTROVERT BRAVO 4050 CONVECTION REFLOW SYSTEM

139
LOT (11) AASORTED ENPAC 6116-YE 4 DRUM WORKSATTION SPILL CONTAINMENT SYSTEM

140
THERMOFORMA 3777 LAB REFRIDGERATOR

141
VAC INERT ATMOSPHERE | VACUUM DEPOSITION GLOVEBOX W/ DRI TRAIN MO, 40-2 INERT GAS PURIFIER & PEDATROL PRESSURE CONTROL

142
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

143
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

144
ECONOLINE INDUSTRIAL ABRASIVE SAND BLASTING GLOVEBOX CABINET

145
JET JBG-6A 6" BENCH GRINDER

146
STANLEY 257 7" BENCH GRINDER

147
BRIDGEPORT 147231 MILLING MACHINE

148
SIGMA SYSTEMS M100 LAB 0VEN (MOBILE)

149
TBD

150
DEWALT D55146 4.5 GALLON 200 PSI PORTABLE EMGLO AIR TOOL COMPRESSOR

151
STRAPACK S860 AUTOMATIC BAND STRAPPING SYSTEM (MOBILE)

152
LASAG AG FLS 542 C LASER

153
JEFFERSON ELECTRONIC CAT # 423-32 -34-056 ENERGY EFFICIENT TRANSFORMER

154
ARBIN INSTRUMENTS BT2000 BATTERY TEST SYSTEM

155
INGERSOLLRAND SS5L5 5HP 60G HIGH CAPACITY AIR COMPRESSOR

156
FISHER HAMILTON SAFEAIR LAB FUME HOOD

157
FORMA SOLUTIONS 923 ULTRA-LOW LAB FREEZER

158
MTI CSX|CSX1 (A/B) BENCHTOP INDUSTRIAL VACUUM GLOVEBOX

159
FLOW SCIENCES BENCHTOP BIOLOGICAL SAFETY CABINET FS235OBKNOALARM

160
EAGLE 4 GALLON SAFETY CABINET

161
KEWAUNEE SCIENTIFIC G63-M3724-L2 SAFETY STORAGE CABINET

162
SKAT BLAST DRY BLAST SYSTEM

163
SHOP FOX M1114 CABINET SAND BLASTING SYSTEM

164
JET J-2550 20" FLOOR DRILL PRESS

165
NESLAB CFT-75 COOLFLOW REFRIDGERATED RECIRCULATOR

166
MILLER SSW-2040 ATT RESISTANCE SPOT WELDER W/ FOOT CONTROLLER

167
TOPAZ POWERMARK FREQUENCY CONVERTER PART # 6270-02

168
TBD

169
LOT (2) CENTRIFUGES (1) BECKMAN GS-6KR & (1) DUPONT SORVALL GLC2B BENCHTOP CENTRIFUGE

170
HUANGCHENG HC-1500YZ MULTI-FUNCTION SWING TYPE SS HIGH SPEED DRY FOOD | COFFEE GRINDING SYSTEM (NEW)

171
ALLLOY PRODUCTS UM STAINLESS STEEL PRESSURE VESSEL | TANK

172
VENTRAL PNEUMATIC 2.5G PRESSURE PAINT TANK

173
EAGLE STAINLESS STEEL 5 LITER PRESSURE TANK | CONTAINER

174
GLAS - COL TM106 HEATING MANTEL (NEW)

175
GRONINGER 2 LITER STAINLESS STEEL PRESSURE COMPONENT

176
ALLLOY PRODUCTS 2 GALLON PRESSURE VESSEL | TANK

177
GENERIC 1 GALLON PRESSURE TANK

178
SARTORIUS MIDRICS 1 INDUSTIAL 5000LB FLOOR SCALE | WITH DIGITAL DISPLAY

179
PRECISION SCIENTIFIC MOD 66800 RECIPROCAL SHAKING WATER BATH

180
BIO ANALYTICAL SYTEM CV-27 VOLTAMMOGRAPH

181
LEYBOLD 100P DRYVAC VACUUM PUMP

182
LABCONCO LAB GLOVEBOX WITH AIR FILTRATION SYSTEM

183
CHROMA 8000 AUTOMATED TEST SYSTEM W/ (6) CHROMA 620158-30-50, (1) CHROMA 62000B-1 POWER SUPPLY, (1) CHROMA 6302 DC ELECTRIC LOAD PLUG IN MODULES

184
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE ON
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE 

185
COLE PARMER MASTERFLEX LS 7550-50 EASY-LOAD II COMPUTERIZED DRIVE

186
SPECAC PART # GS10592 LOW TEMP GOLDEN GATE CONTROLLER

187
THERMO ELECTRON SPECTRA-TECH FOUNDATION SERIES 0070-183 4 0009-83 OPTICAL COMPONENTS

188
(5) PARKER VERIFLO PRAXAIR REGULATORS & ASSORTED PRESSURE GAUGES

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

CUMULUS ENERGY STORAGE

Equipment Dispositions

Equipment Dispositions


Contact:
Phone: 408-402-2436
Sale Location
6205 Engle Way, Unit F, Gilroy
Gilroy, CA 95020
Sale Dates and Times
Sale Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.

Listing Details

1
AGILENT 1260 INFINITY SERIES HPLC STACK
AGILENT 1260 INFINITY SERIES HPLC STACK W COMPUTER

2
AGILENT 5100 ICP-OES SPECTROMETER
AGILENT 5100 ICP-OES SPECTROMETER

3
BRUKER VERTEX 70 FT-IR SPECTROMETER

4
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM W METROHM 858 PROFESSIONAL SAMPLE PROCESSOR

5
CHROMA ATE CHROMA 17020 REGENERATIVE BATTERY PACK TEST SYSTEM CHROMA DC|AC A691101 BI DIRECTIONAL CONVERTER - CHROMA 69206-66-8 REGENERATIVE CHARGE | DISCHARGE TESTER - ADVANTECH INDUSTRIAL COMPUTER

6
IKA RTC B S001 ELECTRONIC SCALE

7
COLE PARMER MASERFLEX LS 7550-50 COMPUTERIZED DRIVE PUMP

8
CORNING 440826 LAB STIRRER

9
NEW ERA PUMP SYSTEMS NE4000 PROGRAMMABLE MICROFLUIDICS SYRINGE

10
PERKINELMER || PERKIN ELMER PLATE WASH PLUS AUTOMATED MICROPLATE SYSTEM

11
J-KEM SCIENTIFIC GEMENI DUAL TEMPERATURE CONTROLLER

12
INSTRUMENTS FOR RESEARCH & INDUSTRY 26-1000SS THERM-O-WATCH VARIABLE VOLTAGE & TEMPERATURE CONTROLLER

13
CAMBRIDGE SENSOTEC RAPID XR2000

14
ACE GLASS CAT 12087 LINE VOLTAGE CONTROLLER (NEW)

15
EUTECH OAKTON PH5+ REMOTE PH METER

16
NEW ERA PUMP SYSTEMS NE90004C PROGRAMMABLE MICROFLUIDICS SYRINGE

17
MIDWEST PACIFIC MP12 IMPULSE HEAT SEALER

18
TBD

19
METTLER TOLEDO ACS AT250 BALANCE | SCALE

20
PG INSTRUMENTS T70+ UV|VIS SPECTROMETER

21
METTLER TOLEDO XP2002 ELECTRONIC BALANCE | SCALE

22
COLE PARMER MASERFLEX LS 7521-40 CONSOLE DRIVE

23
BK PRECISION 5460 MULTIMETER

24
PRECISION 280 SERIES MICRO PROCESSOR CONTROLLED WATER BATH

25
IKA C-MAG HS 7 HOT PLATE

26
DATA PRECISION 1750 DIGITAL MULTIMETER

27
AGILENT 34401A 6 1/2 DIGITAL MULTIMETER

28
POWERVAC 8.3 ABC830-II POWER CONDICTIONER SET WITH (1) EDAQ PTV 510 E-CORDER (1) EDAQ 168 QUAD AMP PH|MV (1) EDAQ 164 QUAD STAT (1) EDAQ EA162 POTENTIOSTAT (5) EDAQ ET306 THERMOCOUPLE POD

29
PRINCETON APPLIED RESEARCH 263A POTENTIOSTAT | GALVANOSTAT

30
TORIOD ISB-100W MEDICAL GRADE ISOLATION TRANSFORMER

31
BAXTER VIS 400 -NL IRRIGATION PUMP

32
LENOVO THINK CENTRE M73 MINI PC

33
PRINCETON APPLIED RESEARCH AMETEK PARSTAT 4000 POTENTIOSTAT EIS ANALYZER

34
TEKTRONIX 7854 OSCILLOSCOPE

35
PRINCETON APPLIED RESEARCH PARSTAT 2273 ADVANCED ELECTRO - CHEMISTRY SYSTEM

36
KEPCO JQE 55-2M POWER SUPPLY (1) LEADER LS-5 ELECTRONIC SWITCH

37
MITSIBISHI CP750U PRINTER WITH PRINTER PAPER

38
INVITROGEN BENCHPRO 4100 CARD PROCESSING STATION

39
IONPURE IP - LXM30X-3 ELECTRO DEIONIZATION SYSTEM

40
ROHDE & SCHWARZ SSCU-GW SWITCHING SIGNAL CONDITIONING UNIT MOD. 1158.577.04

41
ROHDE & SCHWARZ ASCU GSM 900 MS ADVANCED SIGNALING CONDITIONING UNIT MOD. 1158.6396.02

42
SPIRENT SR3410 WCDMA NETWORK EMULATOR

43
NATIONAL INSTRUMENTS GPIB-120A BUS EXTENDER | ISOLATOR

44
VAT GATE VALVE # 02010-AA24-AKA 10023 A-23521

45
ZEBRA 170 Xi III PLUS LABEL PRINTER

46
AGILENT | HP 3456A DIGITAL MULTIMETER

47
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

48
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

49
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

50
AGILENT | HP E3614A 0-8V, 0-6A DC POWER SUPPLY

51
BK PRECISION 5419A 5000 COUNT MULTIMETER

52
EMI | LAMBDA EMS-60-10 POWER SUPPLY

53
EMI | LAMBDA EMS-60-10 POWER SUPPLY

54
EMI | LAMBDA TCR POWER SUPPLY # 00470900

55
EMI | LAMBDA TCR POWER SUPPLY # 00470900

56
CHROMA 63472 HIGH SLEW RATE LOAD CONTROL & MEASUREMENT SYSTEM

57
BAXTER SCIENTIFIC PRODUCTS ULTRA-TECH WJ 301D INCUBATOR

58
SAVANT OVS-400 UNIVERSAL VACUUM SYSTEM CENTRIFUGE

59
JULABO FP50 RECIRCULATING CHILLER W JULABO MH CONTROLLER

60
JULABO FE500 THERMO ELECTRIC FOR CCS MODELS REFRIDGERATED COOLING CIRCULATOR

61
AGILENT TECHNOLOGIES MOD. G8481A RECIRCULATING CHILLER

62
PRECISION 180 SERIES WATER BATH

63
BUCHI ROTAVAPOR R-114 | ROTARY EVAPORATOR

64
IKA RV10 DIGITAL V CONTROLLED ROTOVAPOR EVAPORATOR

65
IKA WERKE RET BASIC HOT PLATE

66
FISCHER SCIENTIFIC ISOTEMP HOT PLATE

67
THERMO SCIENTIFIC CIRMATEC HOT PLATE

68
COLE PARMER MASTERFLEX LS PERISTALTIC PUMP 7550-30 WITH MASTERFLEX DRIVE PUMP

69
CINCINNATI ELECTROSYSTEMS INC. TOUCHVIEW GRAPHIC FLAT PANEL TOUCHSCREEN

70
PERKINELMER | PERKIN ELMER | ANTON PAAR MULTIWAVE 3000 MULTIWAVE REACTION SYSTEM

71
BARNSTEAD DIAMOND RO # D12571 REVERSE OSMOSIS WATER PURICATION SYSTEM

72
SARTORIUS DIGITAL BALANCE | DIGITAL SCALE

73
FRANKEN PDU POWER DISTRIBUTION UNIT

74
HERAEUS MICROFUGE 10 CENTRIFUGE

75
AGILENT | HP 8770A AWS ARBITRARY WAVEFORM SYNTHESIZER 125MHZ SAMPLING RATE

76
MASTECH HY6020EX POWER SUPPLY

77
KEPCO BIPOLAR OPERATIONAL POWER SUPPLY

78
ALLEN BRADLEY PWERFLEX 70 VARIABLE FREQUENCY DRIVE

79
VWR MINI INCUBATOR

80
PRECISION SHALLOW FORM SHAKING WATER BATH

81
TREE MLT PLUS COUNTING SCLALE

82
HEWLETT PACKARD 78173B FETAL MONITOR

83
MICROTECHNICAL INDUSTRIES THERMO PROBE MODEL 105A-1

84
LOT (4) MASTERFLEX PUMP DRIVES

85
LOT (3) FISCHER SCIENTIFIC | CONTROL COMPANY MINI PUMP VARIABLE FLOW

86
METACHEM DEGASSIT MODEL 6324 SOLVENT DEGASSER

87
LOT (2) VARIABLE AUTOTRANSFORMES

88
ACE LINE VOLTAGE CONTROLLER

89
NATIONAL INSTRUMENTS DAQPAD-6020E

90
THERMO ELECTRON EC 105 MODEL 105ECA-115 OWL COMPACT DC POWER SUPPLY

91
MISCL. (2) OMEGA DIGITAL READ OUT | CONTROLLERS

92
DESCO BENCHTOP IONIZER

93
BOEKEL SCIENTIFIC MODEL 260350 ROCKER

94
ABB TB84 PH/ORP/PION DIGITAL TRANSMITTER

95
IKA TOPOLINO SI MINI HOT PLATE

96
LABORATORY DEVICES MEL-TEMP 3.0 CAPILLARY MELTING POINT APPARATUS

97
DAN KAR ELECTROPHORESIS POWER SUPPLY

98
LOT (2) POPE MOD. 8621 1900ML VACUUM DEWAR | FLASK | JAR

99
DIMLO GRAY UNIVERSAL LAB TIMER

100
COLE PARMER MOD. H-08376-20 CHART RECORDER

101
CHICAGO SURGICAL ELECTRICAL MED. 13100 WATER BATH

102
LABLINE WATER BATH

103
COLE PARMER MASTERFLEX LS DIGITAL ECONOMY PERISTALTIC PUMP 7524-40

104
DYNEX ULTRAWASH PLUS MICRO- PLATE WASHER

105
SPARK HOLLAND BV FAMOS ENDURANCE AUTOSAMPLER

106
TEKMAR 14-16001-800

107
TRANSGENOMIC QWX PUMP

108
SKANTRON MOLECULAR DEVICES SCAN WASHER - SKANSTACKER 300 MICRO-PLATE WASHER - COMES WITH 2 PLATE STACKS

109
HP 3396A INTEGRATOR & (1) WELLER WSL SOLDERING BASE

110
LOT (5) SCIENTIFIC INSTRUMENTS AQUA TRAP 410-10

111
POWER DESIGNS TP343A TRIPLE OUTPUT DC POWER SUPPLY

112
BARNSTEAD THERMOLYNES SL7225 STIR LIGHT STIRRER

113
KIKUSUI PLZ 300W ELECTRIC LOAD

114
HP 54600B 100MHZ OSCILLOSCOPE

115
INSTRUMENTS FOR RESEARCH AND INDUSTRY THERMOWATCH L6-1000SS

116
BEL MERIT FG140 LOW DISTORTION FUNCTION GENERATOR

117
LAMOTTE SMART 2 COLORIMETER

118
HIOS CLT-50 POWER SUPPLY W CL7000 PNEUMATIC GUN

119
CHARLES WATER AUTO-SET ION PUMP

120
BLOCK-TRAFO JET 1000 TRANSFORMER

121
BK PRECISION 1635 DC POWER SUPPLY

122
TRIPP-LITE SMART 700 RM UPS

123
EMC | ELECTRONIC MEASUREMENTS TCR 40S25-1-4 POWER SUPPLY

124
LOT (3) KEPCO JQE 55-2M POWER SUPPLY

125
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

126
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

127
KEPCO BOP-20 BOP-20-20M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

128
KEPCO BOP-36 -12M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

129
HP | AGILENT 6433B DC POWER SUPPLY

130
HP | AGILENT 6433B DC POWER SUPPLY

131
HP | AGILENT 6433B DC POWER SUPPLY

132
HP | AGILENT 6261B DC POWER SUPPLY

133
ELECTRONIC MEASUREMENTS INC. | EMI TCR POWER SUPPLY

134
BAKER COMPANY ANIGARD VF MOBILE VERTICLE CIRCULATION FLOW HOOD

135
FURMA SCIENTIFIC 3326 WATER JACKETED CO2 DUAL STACKABLE LAB INCUBATOR

136
TBD

137
LEISTER NOVOLABS BASIC AT INDUSTRIAL LAZER WELDING SYSTEM

138
SPEEDLINE ELECTROVERT BRAVO 4050 CONVECTION REFLOW SYSTEM

139
LOT (11) AASORTED ENPAC 6116-YE 4 DRUM WORKSATTION SPILL CONTAINMENT SYSTEM

140
THERMOFORMA 3777 LAB REFRIDGERATOR

141
VAC INERT ATMOSPHERE | VACUUM DEPOSITION GLOVEBOX W/ DRI TRAIN MO, 40-2 INERT GAS PURIFIER & PEDATROL PRESSURE CONTROL

142
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

143
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

144
ECONOLINE INDUSTRIAL ABRASIVE SAND BLASTING GLOVEBOX CABINET

145
JET JBG-6A 6" BENCH GRINDER

146
STANLEY 257 7" BENCH GRINDER

147
BRIDGEPORT 147231 MILLING MACHINE

148
SIGMA SYSTEMS M100 LAB 0VEN (MOBILE)

149
TBD

150
DEWALT D55146 4.5 GALLON 200 PSI PORTABLE EMGLO AIR TOOL COMPRESSOR

151
STRAPACK S860 AUTOMATIC BAND STRAPPING SYSTEM (MOBILE)

152
LASAG AG FLS 542 C LASER

153
JEFFERSON ELECTRONIC CAT # 423-32 -34-056 ENERGY EFFICIENT TRANSFORMER

154
ARBIN INSTRUMENTS BT2000 BATTERY TEST SYSTEM

155
INGERSOLLRAND SS5L5 5HP 60G HIGH CAPACITY AIR COMPRESSOR

156
FISHER HAMILTON SAFEAIR LAB FUME HOOD

157
FORMA SOLUTIONS 923 ULTRA-LOW LAB FREEZER

158
MTI CSX|CSX1 (A/B) BENCHTOP INDUSTRIAL VACUUM GLOVEBOX

159
FLOW SCIENCES BENCHTOP BIOLOGICAL SAFETY CABINET FS235OBKNOALARM

160
EAGLE 4 GALLON SAFETY CABINET

161
KEWAUNEE SCIENTIFIC G63-M3724-L2 SAFETY STORAGE CABINET

162
SKAT BLAST DRY BLAST SYSTEM

163
SHOP FOX M1114 CABINET SAND BLASTING SYSTEM

164
JET J-2550 20" FLOOR DRILL PRESS

165
NESLAB CFT-75 COOLFLOW REFRIDGERATED RECIRCULATOR

166
MILLER SSW-2040 ATT RESISTANCE SPOT WELDER W/ FOOT CONTROLLER

167
TOPAZ POWERMARK FREQUENCY CONVERTER PART # 6270-02

168
TBD

169
LOT (2) CENTRIFUGES (1) BECKMAN GS-6KR & (1) DUPONT SORVALL GLC2B BENCHTOP CENTRIFUGE

170
HUANGCHENG HC-1500YZ MULTI-FUNCTION SWING TYPE SS HIGH SPEED DRY FOOD | COFFEE GRINDING SYSTEM (NEW)

171
ALLLOY PRODUCTS UM STAINLESS STEEL PRESSURE VESSEL | TANK

172
VENTRAL PNEUMATIC 2.5G PRESSURE PAINT TANK

173
EAGLE STAINLESS STEEL 5 LITER PRESSURE TANK | CONTAINER

174
GLAS - COL TM106 HEATING MANTEL (NEW)

175
GRONINGER 2 LITER STAINLESS STEEL PRESSURE COMPONENT

176
ALLLOY PRODUCTS 2 GALLON PRESSURE VESSEL | TANK

177
GENERIC 1 GALLON PRESSURE TANK

178
SARTORIUS MIDRICS 1 INDUSTIAL 5000LB FLOOR SCALE | WITH DIGITAL DISPLAY

179
PRECISION SCIENTIFIC MOD 66800 RECIPROCAL SHAKING WATER BATH

180
BIO ANALYTICAL SYTEM CV-27 VOLTAMMOGRAPH

181
LEYBOLD 100P DRYVAC VACUUM PUMP

182
LABCONCO LAB GLOVEBOX WITH AIR FILTRATION SYSTEM

183
CHROMA 8000 AUTOMATED TEST SYSTEM W/ (6) CHROMA 620158-30-50, (1) CHROMA 62000B-1 POWER SUPPLY, (1) CHROMA 6302 DC ELECTRIC LOAD PLUG IN MODULES

184
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE ON
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE 

185
COLE PARMER MASTERFLEX LS 7550-50 EASY-LOAD II COMPUTERIZED DRIVE

186
SPECAC PART # GS10592 LOW TEMP GOLDEN GATE CONTROLLER

187
THERMO ELECTRON SPECTRA-TECH FOUNDATION SERIES 0070-183 4 0009-83 OPTICAL COMPONENTS

188
(5) PARKER VERIFLO PRAXAIR REGULATORS & ASSORTED PRESSURE GAUGES

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
CUMULUS ENERGY STORAGE
 Online Only Auction
Sale Date(s)
Bidding Starts: Saturday Oct 24 , 02:00 PM
Bidding Ends: Thursday Dec 10 , 02:00 PM
Sale Location

Gilroy, CA 95020
Listing Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba edispositions ("Auctioneer") with a known address of 999 N. 10TH STREET, SAN JOSE, CA 95112 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 20% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


1
AGILENT 1260 INFINITY SERIES HPLC STACK
AGILENT 1260 INFINITY SERIES HPLC STACK W COMPUTER

2
AGILENT 5100 ICP-OES SPECTROMETER
AGILENT 5100 ICP-OES SPECTROMETER

3
BRUKER VERTEX 70 FT-IR SPECTROMETER

4
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM
METROHM 930 COMPACT IC FLEX ION CHROMATOGRAPHY SYSTEM W METROHM 858 PROFESSIONAL SAMPLE PROCESSOR

5
CHROMA ATE CHROMA 17020 REGENERATIVE BATTERY PACK TEST SYSTEM CHROMA DC|AC A691101 BI DIRECTIONAL CONVERTER - CHROMA 69206-66-8 REGENERATIVE CHARGE | DISCHARGE TESTER - ADVANTECH INDUSTRIAL COMPUTER

6
IKA RTC B S001 ELECTRONIC SCALE

7
COLE PARMER MASERFLEX LS 7550-50 COMPUTERIZED DRIVE PUMP

8
CORNING 440826 LAB STIRRER

9
NEW ERA PUMP SYSTEMS NE4000 PROGRAMMABLE MICROFLUIDICS SYRINGE

10
PERKINELMER || PERKIN ELMER PLATE WASH PLUS AUTOMATED MICROPLATE SYSTEM

11
J-KEM SCIENTIFIC GEMENI DUAL TEMPERATURE CONTROLLER

12
INSTRUMENTS FOR RESEARCH & INDUSTRY 26-1000SS THERM-O-WATCH VARIABLE VOLTAGE & TEMPERATURE CONTROLLER

13
CAMBRIDGE SENSOTEC RAPID XR2000

14
ACE GLASS CAT 12087 LINE VOLTAGE CONTROLLER (NEW)

15
EUTECH OAKTON PH5+ REMOTE PH METER

16
NEW ERA PUMP SYSTEMS NE90004C PROGRAMMABLE MICROFLUIDICS SYRINGE

17
MIDWEST PACIFIC MP12 IMPULSE HEAT SEALER

18
TBD

19
METTLER TOLEDO ACS AT250 BALANCE | SCALE

20
PG INSTRUMENTS T70+ UV|VIS SPECTROMETER

21
METTLER TOLEDO XP2002 ELECTRONIC BALANCE | SCALE

22
COLE PARMER MASERFLEX LS 7521-40 CONSOLE DRIVE

23
BK PRECISION 5460 MULTIMETER

24
PRECISION 280 SERIES MICRO PROCESSOR CONTROLLED WATER BATH

25
IKA C-MAG HS 7 HOT PLATE

26
DATA PRECISION 1750 DIGITAL MULTIMETER

27
AGILENT 34401A 6 1/2 DIGITAL MULTIMETER

28
POWERVAC 8.3 ABC830-II POWER CONDICTIONER SET WITH (1) EDAQ PTV 510 E-CORDER (1) EDAQ 168 QUAD AMP PH|MV (1) EDAQ 164 QUAD STAT (1) EDAQ EA162 POTENTIOSTAT (5) EDAQ ET306 THERMOCOUPLE POD

29
PRINCETON APPLIED RESEARCH 263A POTENTIOSTAT | GALVANOSTAT

30
TORIOD ISB-100W MEDICAL GRADE ISOLATION TRANSFORMER

31
BAXTER VIS 400 -NL IRRIGATION PUMP

32
LENOVO THINK CENTRE M73 MINI PC

33
PRINCETON APPLIED RESEARCH AMETEK PARSTAT 4000 POTENTIOSTAT EIS ANALYZER

34
TEKTRONIX 7854 OSCILLOSCOPE

35
PRINCETON APPLIED RESEARCH PARSTAT 2273 ADVANCED ELECTRO - CHEMISTRY SYSTEM

36
KEPCO JQE 55-2M POWER SUPPLY (1) LEADER LS-5 ELECTRONIC SWITCH

37
MITSIBISHI CP750U PRINTER WITH PRINTER PAPER

38
INVITROGEN BENCHPRO 4100 CARD PROCESSING STATION

39
IONPURE IP - LXM30X-3 ELECTRO DEIONIZATION SYSTEM

40
ROHDE & SCHWARZ SSCU-GW SWITCHING SIGNAL CONDITIONING UNIT MOD. 1158.577.04

41
ROHDE & SCHWARZ ASCU GSM 900 MS ADVANCED SIGNALING CONDITIONING UNIT MOD. 1158.6396.02

42
SPIRENT SR3410 WCDMA NETWORK EMULATOR

43
NATIONAL INSTRUMENTS GPIB-120A BUS EXTENDER | ISOLATOR

44
VAT GATE VALVE # 02010-AA24-AKA 10023 A-23521

45
ZEBRA 170 Xi III PLUS LABEL PRINTER

46
AGILENT | HP 3456A DIGITAL MULTIMETER

47
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

48
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

49
AGILENT | HP 663311B 0-5V, 0-3A 5A PEAK MOBILE COMMUNICATIONS DC SOURCE

50
AGILENT | HP E3614A 0-8V, 0-6A DC POWER SUPPLY

51
BK PRECISION 5419A 5000 COUNT MULTIMETER

52
EMI | LAMBDA EMS-60-10 POWER SUPPLY

53
EMI | LAMBDA EMS-60-10 POWER SUPPLY

54
EMI | LAMBDA TCR POWER SUPPLY # 00470900

55
EMI | LAMBDA TCR POWER SUPPLY # 00470900

56
CHROMA 63472 HIGH SLEW RATE LOAD CONTROL & MEASUREMENT SYSTEM

57
BAXTER SCIENTIFIC PRODUCTS ULTRA-TECH WJ 301D INCUBATOR

58
SAVANT OVS-400 UNIVERSAL VACUUM SYSTEM CENTRIFUGE

59
JULABO FP50 RECIRCULATING CHILLER W JULABO MH CONTROLLER

60
JULABO FE500 THERMO ELECTRIC FOR CCS MODELS REFRIDGERATED COOLING CIRCULATOR

61
AGILENT TECHNOLOGIES MOD. G8481A RECIRCULATING CHILLER

62
PRECISION 180 SERIES WATER BATH

63
BUCHI ROTAVAPOR R-114 | ROTARY EVAPORATOR

64
IKA RV10 DIGITAL V CONTROLLED ROTOVAPOR EVAPORATOR

65
IKA WERKE RET BASIC HOT PLATE

66
FISCHER SCIENTIFIC ISOTEMP HOT PLATE

67
THERMO SCIENTIFIC CIRMATEC HOT PLATE

68
COLE PARMER MASTERFLEX LS PERISTALTIC PUMP 7550-30 WITH MASTERFLEX DRIVE PUMP

69
CINCINNATI ELECTROSYSTEMS INC. TOUCHVIEW GRAPHIC FLAT PANEL TOUCHSCREEN

70
PERKINELMER | PERKIN ELMER | ANTON PAAR MULTIWAVE 3000 MULTIWAVE REACTION SYSTEM

71
BARNSTEAD DIAMOND RO # D12571 REVERSE OSMOSIS WATER PURICATION SYSTEM

72
SARTORIUS DIGITAL BALANCE | DIGITAL SCALE

73
FRANKEN PDU POWER DISTRIBUTION UNIT

74
HERAEUS MICROFUGE 10 CENTRIFUGE

75
AGILENT | HP 8770A AWS ARBITRARY WAVEFORM SYNTHESIZER 125MHZ SAMPLING RATE

76
MASTECH HY6020EX POWER SUPPLY

77
KEPCO BIPOLAR OPERATIONAL POWER SUPPLY

78
ALLEN BRADLEY PWERFLEX 70 VARIABLE FREQUENCY DRIVE

79
VWR MINI INCUBATOR

80
PRECISION SHALLOW FORM SHAKING WATER BATH

81
TREE MLT PLUS COUNTING SCLALE

82
HEWLETT PACKARD 78173B FETAL MONITOR

83
MICROTECHNICAL INDUSTRIES THERMO PROBE MODEL 105A-1

84
LOT (4) MASTERFLEX PUMP DRIVES

85
LOT (3) FISCHER SCIENTIFIC | CONTROL COMPANY MINI PUMP VARIABLE FLOW

86
METACHEM DEGASSIT MODEL 6324 SOLVENT DEGASSER

87
LOT (2) VARIABLE AUTOTRANSFORMES

88
ACE LINE VOLTAGE CONTROLLER

89
NATIONAL INSTRUMENTS DAQPAD-6020E

90
THERMO ELECTRON EC 105 MODEL 105ECA-115 OWL COMPACT DC POWER SUPPLY

91
MISCL. (2) OMEGA DIGITAL READ OUT | CONTROLLERS

92
DESCO BENCHTOP IONIZER

93
BOEKEL SCIENTIFIC MODEL 260350 ROCKER

94
ABB TB84 PH/ORP/PION DIGITAL TRANSMITTER

95
IKA TOPOLINO SI MINI HOT PLATE

96
LABORATORY DEVICES MEL-TEMP 3.0 CAPILLARY MELTING POINT APPARATUS

97
DAN KAR ELECTROPHORESIS POWER SUPPLY

98
LOT (2) POPE MOD. 8621 1900ML VACUUM DEWAR | FLASK | JAR

99
DIMLO GRAY UNIVERSAL LAB TIMER

100
COLE PARMER MOD. H-08376-20 CHART RECORDER

101
CHICAGO SURGICAL ELECTRICAL MED. 13100 WATER BATH

102
LABLINE WATER BATH

103
COLE PARMER MASTERFLEX LS DIGITAL ECONOMY PERISTALTIC PUMP 7524-40

104
DYNEX ULTRAWASH PLUS MICRO- PLATE WASHER

105
SPARK HOLLAND BV FAMOS ENDURANCE AUTOSAMPLER

106
TEKMAR 14-16001-800

107
TRANSGENOMIC QWX PUMP

108
SKANTRON MOLECULAR DEVICES SCAN WASHER - SKANSTACKER 300 MICRO-PLATE WASHER - COMES WITH 2 PLATE STACKS

109
HP 3396A INTEGRATOR & (1) WELLER WSL SOLDERING BASE

110
LOT (5) SCIENTIFIC INSTRUMENTS AQUA TRAP 410-10

111
POWER DESIGNS TP343A TRIPLE OUTPUT DC POWER SUPPLY

112
BARNSTEAD THERMOLYNES SL7225 STIR LIGHT STIRRER

113
KIKUSUI PLZ 300W ELECTRIC LOAD

114
HP 54600B 100MHZ OSCILLOSCOPE

115
INSTRUMENTS FOR RESEARCH AND INDUSTRY THERMOWATCH L6-1000SS

116
BEL MERIT FG140 LOW DISTORTION FUNCTION GENERATOR

117
LAMOTTE SMART 2 COLORIMETER

118
HIOS CLT-50 POWER SUPPLY W CL7000 PNEUMATIC GUN

119
CHARLES WATER AUTO-SET ION PUMP

120
BLOCK-TRAFO JET 1000 TRANSFORMER

121
BK PRECISION 1635 DC POWER SUPPLY

122
TRIPP-LITE SMART 700 RM UPS

123
EMC | ELECTRONIC MEASUREMENTS TCR 40S25-1-4 POWER SUPPLY

124
LOT (3) KEPCO JQE 55-2M POWER SUPPLY

125
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

126
KEPCO BOP-20 BOP-20-10M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

127
KEPCO BOP-20 BOP-20-20M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

128
KEPCO BOP-36 -12M BIPOLAR OPERATIONAL POWER SUPPLY AMPLIFIER

129
HP | AGILENT 6433B DC POWER SUPPLY

130
HP | AGILENT 6433B DC POWER SUPPLY

131
HP | AGILENT 6433B DC POWER SUPPLY

132
HP | AGILENT 6261B DC POWER SUPPLY

133
ELECTRONIC MEASUREMENTS INC. | EMI TCR POWER SUPPLY

134
BAKER COMPANY ANIGARD VF MOBILE VERTICLE CIRCULATION FLOW HOOD

135
FURMA SCIENTIFIC 3326 WATER JACKETED CO2 DUAL STACKABLE LAB INCUBATOR

136
TBD

137
LEISTER NOVOLABS BASIC AT INDUSTRIAL LAZER WELDING SYSTEM

138
SPEEDLINE ELECTROVERT BRAVO 4050 CONVECTION REFLOW SYSTEM

139
LOT (11) AASORTED ENPAC 6116-YE 4 DRUM WORKSATTION SPILL CONTAINMENT SYSTEM

140
THERMOFORMA 3777 LAB REFRIDGERATOR

141
VAC INERT ATMOSPHERE | VACUUM DEPOSITION GLOVEBOX W/ DRI TRAIN MO, 40-2 INERT GAS PURIFIER & PEDATROL PRESSURE CONTROL

142
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

143
SIGMA SYSTEMS M88 MOBILE DUAL STACK TEMPERATUURE TEST CHAMBER

144
ECONOLINE INDUSTRIAL ABRASIVE SAND BLASTING GLOVEBOX CABINET

145
JET JBG-6A 6" BENCH GRINDER

146
STANLEY 257 7" BENCH GRINDER

147
BRIDGEPORT 147231 MILLING MACHINE

148
SIGMA SYSTEMS M100 LAB 0VEN (MOBILE)

149
TBD

150
DEWALT D55146 4.5 GALLON 200 PSI PORTABLE EMGLO AIR TOOL COMPRESSOR

151
STRAPACK S860 AUTOMATIC BAND STRAPPING SYSTEM (MOBILE)

152
LASAG AG FLS 542 C LASER

153
JEFFERSON ELECTRONIC CAT # 423-32 -34-056 ENERGY EFFICIENT TRANSFORMER

154
ARBIN INSTRUMENTS BT2000 BATTERY TEST SYSTEM

155
INGERSOLLRAND SS5L5 5HP 60G HIGH CAPACITY AIR COMPRESSOR

156
FISHER HAMILTON SAFEAIR LAB FUME HOOD

157
FORMA SOLUTIONS 923 ULTRA-LOW LAB FREEZER

158
MTI CSX|CSX1 (A/B) BENCHTOP INDUSTRIAL VACUUM GLOVEBOX

159
FLOW SCIENCES BENCHTOP BIOLOGICAL SAFETY CABINET FS235OBKNOALARM

160
EAGLE 4 GALLON SAFETY CABINET

161
KEWAUNEE SCIENTIFIC G63-M3724-L2 SAFETY STORAGE CABINET

162
SKAT BLAST DRY BLAST SYSTEM

163
SHOP FOX M1114 CABINET SAND BLASTING SYSTEM

164
JET J-2550 20" FLOOR DRILL PRESS

165
NESLAB CFT-75 COOLFLOW REFRIDGERATED RECIRCULATOR

166
MILLER SSW-2040 ATT RESISTANCE SPOT WELDER W/ FOOT CONTROLLER

167
TOPAZ POWERMARK FREQUENCY CONVERTER PART # 6270-02

168
TBD

169
LOT (2) CENTRIFUGES (1) BECKMAN GS-6KR & (1) DUPONT SORVALL GLC2B BENCHTOP CENTRIFUGE

170
HUANGCHENG HC-1500YZ MULTI-FUNCTION SWING TYPE SS HIGH SPEED DRY FOOD | COFFEE GRINDING SYSTEM (NEW)

171
ALLLOY PRODUCTS UM STAINLESS STEEL PRESSURE VESSEL | TANK

172
VENTRAL PNEUMATIC 2.5G PRESSURE PAINT TANK

173
EAGLE STAINLESS STEEL 5 LITER PRESSURE TANK | CONTAINER

174
GLAS - COL TM106 HEATING MANTEL (NEW)

175
GRONINGER 2 LITER STAINLESS STEEL PRESSURE COMPONENT

176
ALLLOY PRODUCTS 2 GALLON PRESSURE VESSEL | TANK

177
GENERIC 1 GALLON PRESSURE TANK

178
SARTORIUS MIDRICS 1 INDUSTIAL 5000LB FLOOR SCALE | WITH DIGITAL DISPLAY

179
PRECISION SCIENTIFIC MOD 66800 RECIPROCAL SHAKING WATER BATH

180
BIO ANALYTICAL SYTEM CV-27 VOLTAMMOGRAPH

181
LEYBOLD 100P DRYVAC VACUUM PUMP

182
LABCONCO LAB GLOVEBOX WITH AIR FILTRATION SYSTEM

183
CHROMA 8000 AUTOMATED TEST SYSTEM W/ (6) CHROMA 620158-30-50, (1) CHROMA 62000B-1 POWER SUPPLY, (1) CHROMA 6302 DC ELECTRIC LOAD PLUG IN MODULES

184
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE ON
IONPURE LX IP-LXM30X-3 DEIONIZATION HOT AIR SANITIZATI MODULE 

185
COLE PARMER MASTERFLEX LS 7550-50 EASY-LOAD II COMPUTERIZED DRIVE

186
SPECAC PART # GS10592 LOW TEMP GOLDEN GATE CONTROLLER

187
THERMO ELECTRON SPECTRA-TECH FOUNDATION SERIES 0070-183 4 0009-83 OPTICAL COMPONENTS

188
(5) PARKER VERIFLO PRAXAIR REGULATORS & ASSORTED PRESSURE GAUGES