00

Details
Auction will begin at 10 am CST on May 15, 2021 online and on location of Gardner Farms located at 4466 Hwy 50 East, Williamsport, TN 38487. Load Out by June 1, 2021.  Some assistance available.  The chippers will need more assistance that can be provided by staff.    Online bidding will be available live during the auction. If planning to bid online, please register prior to sale start time.   Payment is expected the day of the sale unless arrangements have been made prior to the auction. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items must be paid within 7 business days. Removal of all items must take place within 15 days of the sale date. The auction company will describe the items to the best of their abilities, in that description lies no warranty written or implied. All items sell where is as is. Buyer is responsible to inspect all merchandise prior to placing bids and make their own judgement as to condition of items being sold. There is a 13% buyer’s premium in effect for all online purchases. All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. All items must be removed from the premises by June 1, 2021 Auction company is not responsible for any missing or stolen items. Please contact Zach Kittrell at zk@brightstarauctions.com or call at 931-224-0699 for further questions and details. There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.  

107

Haul Master 3point quick hitch
Haul Master 3-point quick hitch item number 97214. Fits tractor up to 45 HP maximum weight 2000lbs

108

VOLVO L120C RUBBERTIRE LOADER
VOLVO L120C RUBBER TIRE LOADER. SNL120CV61560.ARTICULATING LOADER.16109 HOURS SHOWING, QUICK COUPLE ATTACHMENT, 23.5-25 E8 TIRES, GOOD RUBBER 60-70%

108A

108B

108B

108C

Clean Up Bucket
Clean Up Bucket that is 120" wide and 60" deep and 60" Tall for Forks

109

2007 Peerless Walking Floor Trailer
2007 Peerless (VIN: 1PLE0452XPE55742) Type 45-CTSSF walking floor trailer with Hallco Live Floor

110

2007 Peerless Open Top Van
2007 Peerless Type 45-CTSSF (VIN: 1PLE04528TPC55703) Open Top Aluminum Van with Keith Walking Floor, 11R24.5 Tires at 30%

111

2000 Peerless Open Top Van
2000 Peerless Model 45-CTSSf (VIN: 1PLE04526YPE31522) Open Top Aluminum Van with Hallco Walking Floor. 11r22.5 tires at 60%

116

2005 ITI 42' Open Top Chip Van
2005 ITI 42' Open Top Chip Van (VIN: 1292A42235T199283) with 11R24.5 Tires at 60%

113

1990 Peerless Open Top Van
1990 Peerless Model CTSSF/40 (VIN: 1PLE04025LPB28540) Open Top Aluminum Van. Walking Floor worn out has plastic over so can be used as a dust trailer

117

1998 Peerless 42' Open Top Van
1998 Peerless 42' Open Top Van (VIN: 1PLE0423XPL26954) Type 42-CTS with 11R24.5 Tires at 50% Roll Up Tarp

115

117A

Peerless 42' open top chip van
Peerless 42' open top chip van 11R22.5 tires tires 50% vin V469468 *SELLING WITH NO TITLE BILL OF SALE ONLY

118

1998 Peerless 42' Open Top Van
1998 Peerless 42' Open Top Van (VIN: 1PLE0422WPB26950) Type 42-CTS with 11R24.5 Tires at 50% Roll Up Tarp

120

1988 East 32' Dump Trailer
1988 East 32' Aluminum Dump Trailer (VIN : 1E1D1P28'6KRJ09769) Tires 11R22.5 at 20%

121

Cobra 32' Dump Trailer
Cobra Mfg. 32' Aluminum Dump Trailer (VIN: 1C9DS32BL1133279) Tires 11R24.5 at 60-70 %

122

1988 Benson Dump Trailer
1988 Benson Model 31 3-C 31' Aluminum Dump Trailer (VIN: 1NUDT287L2FMASON) 11R22.5 Tires at 20-30%

123

1979 Dorsey Dump Trailer
1979 Dorsey Model 30-DAT-7 (VIN: HW-13860) Aluminum Dump Trailer 285/75N 24.5 tires at 20%

128

40' closed top container van
40' closed top steel container mounted on Strick carrier, top swing mesh door, R11 28 tires 4 tires 70% 4 tires 20% *SELLING WITH NO TITLE BILL OF SALE ONLY

129

1984 Budd 40' Closed Top Van
1984 Budd 40' Closed Top Chip Van (VIN: V027EE213721) with 285/75R 24.5 Tires at 30%

130

1980 Strick 42' Closed Top Van
1980 Strick 42' Closed Top Van (VIN: 242643) with 11R22.5 Tires at 40%

131

1978 Dorsey 45' Closed Top Van
1978 Dorsey 45' Clsoed Top Van (VIN: 135857) Model AIOT-277 with 11R22.5 Tires at 30%

132

1980 Closed Top Box Trailer
1980 Monon 48' (VIN: 47396) Closed Top Box Trailer. No Back Doors. Tires at 10-20% selling with Bill of sale only NO TITLE

133

40' Closed Top Box Van
40' Closed Top Box Van, 10:00-20 Tires at 20% selling with bill of sale only NO TITLE

149h

150

42' Flat Bed Trailer
42' Flat Bed Trailer 96" wide, 75R22. Tires at 30%

151

169

1994 Volvo Dump Truck
1994 Volvo Dump Truck (VIN: 4V2JLBJF9RR832890) Genuine Excel Transmission, Cummins N14, Drive Tires @60%, Rear Tires @30-40%; Tri Axle

152

Trailer Gate
Trailer Gate off of a 2 Ton Truck

170

1987 Volvo Truck
1987 Volvo White Truck with day Cab, Cummins 350, Eaton Fuller Transmission, Jake Brakes, 704,965 miles, Chelsea PTO

171

1981 Ford 9000 Truck
1981 Ford 9000 Truck (VIN: 1FDY090W3BVJ30045) 8LL Transmission, Cummins slant 6, Miles Gauge does not work, Cay Cab. 11R24.5 Tires, Walking Beam, Hydraulic PTO Pump, Tires have Dry Rot.

199

(4) Used Firestone 28L-26 Loader Tires
(4) Used Firestone 28L-26 on rims Loader Tires at 50%

200

Hurdle Portable Sawmill
Hurdle 2 Head Block 9' Carriage Portable Sawmill. Pioneer Electronic Setworks. Hurdle Built in as a Band mill but converted it to Circle Saw. Includes Husk with Chain Log Turner, Off Bearer Belt, Chain Type Log Turner, 20' x18" Roll case, Cab and Controls in Cab. Hydraulic Carriage Drive with approx. 40 HP Motor. Does Not Include Main Motor Edger or Log Deck

201

Log Deck
18' 2 Strand Log Deck with H-78 Chain, Nose Skids

202

Allis Chalmers Induction Motor
Allis-Chalmers Induction Motor 200 HP, 585 RPM, Frame 30F8. No Motor Controls

203

Miner Saw Works 2 Saw Edger
Miner Saw Works 27x4" 2 Saw Edger with 20 HP Motor includes Infeed and Outfeed

204

Tie Back
Items 200-203 Tied Back Together with a 10% raise

205

Head Saw
56" Inserted Tooth Head Saw

206

Blower
18" Blower with 5 HP Motor and Approx. 65' 8" Pipe

207

Roll case
12' Roll case with (6) 24x6" Spiral Rolls. No Drive

208

Roll case
4' 4 Strand Jump Up Trans with Roller Chain and 10' Roll case (6) 12x4" Live Rolls. Hydraulic Operated. No Hydraulic Power

209

Barn sweep Conveyor
55'x48" Barn sweep Conveyor. No Drive

210

215

PRECISION 58" 6 KNIFE CHIPPER
PRECISION 58" 6 KNIFE CHIPPER, SN C 1994 NO MOTOR

216

Vibrating Conveyor
30' Vibrating Conveyor with 18" Bottom, 30" at Top, 12" Sides. Has Drive. No Motor and No Bottom Rails

217

Fulghum Chipper
Fulghum 66" 6 Knife Chipper. No Motor, 1st lot of an entirety

218

Fulghum Shaker Screen
Fulghum BS66 (SN: 06-73-25) 6'x6' Shaker Screen with 48" Cyclone

219

Fulghum Chip Blower
Fulghum 36" Chip Blower with 40 HP Motor. Pipe and Y Chute

220

Vibrating Conveyor
Carries 33' Vibrating Conveyor 24" Bottom, 32" at Top, 6" Sides. Had Drive. No Motor

221

Tie Back
Items 217-220 Tied Back Together with 10% Raise

230

Double Surface Planer Ironwood DSP2500
50 HP Motor, on a frame to receive forks, moves on casters. Phase converter. To step down 3 ph to single phase. Super nice machine 25’ side x8’ thick.

231

Pop up Chop Saw
Brand Unknown, Excellent Condition, Air Actuated 

232

Powermatic Model 2000 Table Saw
Accufence Precision Fence, S/N 15L62001758, Excellent Condition

231a

18" X 1" Arbor Hole Carbide Tip Chop Saw
18" X 1" Arbor Hole Carbide Tip Chop Saw.

233

Omega Model RNC600 Radial Arm Saw
60 Hertz, 230 Volt, Excellent Condition, 2009 Model. Nice gravity feed roll stand on casters. With sliding stops. Super nice. 1 ) 10’ x 21” gravity feed sections 1) 54” x 21” gravity roll section

233a

10’ X 21” gravity roll section
10’ X 21” gravity roll section With adjustable legs

233b

14” carbide top saw. fits radial saw
14” carbide top saw. fits radial saw  with 1” arbor

233c

14” 24 tooth thick stock rip saw choice through 233G
Choice through G   1” arbor hole

233d

14” x 1” arbor hole 24 tooth carbide tip saw
14” x 1” arbor hole 24 tooth carbide tip saw .

233e

14” x 1” arbor 24 tooth carbide tip saw
.14” x 1” arbor 24 tooth carbide tip saw

233f

14” x 1” arbor 24 tooth carbide tip saw
14” x 1” arbor 24 tooth carbide tip saw .

233g

14” x 1” arbor 24 tooth carbide tip saw
.14” x 1” arbor 24 tooth carbide tip saw

234

Timesavers Speedsander Model S311-13 -14
Top Head, 36" Wide, S/N 10S311S105, Excellent Condition

235

Grizzly Shaper Model 1026
Model 2015, 3 HP W/ Mounted Motor control, S/N US445987 W/ Grizzly Power Feeder and box of tooling

236

key Industries Phase Master
key Industries Phase Master   MA-6-R.

236A

Fuel Tank
Fuel Tank Dual Chamber 1/2 Hyd. Fluid 1/2 fuel

236B

Roll Around Folding Tool Box
Roll Around Folding Tool Box 60"x60"x12" deep sides, closed 1' wide

236C

236D

236E

550 Gallon Plastic Tank with small hole
550 Gallon Plastic Tank looks like it may have a small hole

236F

236G

236H

8'x3' Roll Around Work Table
8'x3' Roll Around 500lb Capacity Steel Work Table

236I

236j

236K

4'x8' Steel Work Trailer
4'x8' Steel Work Trailer

236L

237

Pallet of Pipe Hangers and Pipe Fitting
Pallet of Pipe Hangers and Pipe Fittings

238

239

240

Pallet of Pipe Hangers and Pipe Fitting
Pallet of Pipe Hangers and Pipe Fittings

241

242

Pallet of Pipe Hangers and Pipe Fitting
Pallet of Pipe Hangers and Pipe Fittings

243

Pallet of U-Bolts and Threaded Pipe Nipples
Pallet of U-Bolt and Threaded Pipe Nipples

244

245

Pallet of 1.5 Pipe Unions and other Pipe Fittings
Pallet of 1/5 Pipe Unions and other Pipe Fittings

246

247

248

249

249A

Pallet of Ball Valves
Pallet of Ball Valves from 1/2" to 1 1/2"

249B

249C

249D

249E

249F

249G

Pallet of U- Bolts and Pipe Fittings
Pallet of U-Bolts and Pipe Fittings

249H

Muncie Tank
Muncie

Newly sharpened 18’ saw blade 1” arbor ho

249I

249J

249K

(47) Sheets of 4x8' Styrofoam
(66) Sheets of 4.8' Styrofoam

249l

(50) sheets of 2x8' Styrofoam
(61) sheets of 2x8' Styrofoam

249M

Ingersol Rand air compressor
Ingersol Rand T30 Tank Mount air compressor with Honda GX340 11HP gas motor, electric start

249N

3 Tarps
3 tarps

249O

249P

249Q

249R

249S

(2) 8'x2' Galvanized Ditch Guards
(2) 8'x2' Galvanized Ditch Guards

249T

249U

249V

249W

250

Irrigation System
Irrigation System: Fair Banks Moor Pump, Chrysler Gas Engine, Twin Disk PTO. Mounted on Trailer

250A

Water Pipe
Approx. 40' Pieces of 4" x20' water pipe

251

Rainbow Hose Reel
Rainbow Hose Reel with Hose on Trailer. PTO Hook Up for Hose Reel

252

Rainbow Sprinkler
Rainbow Sprinkler with PTO Cable Reel

252A

Lots 250-252 Combined with 10% Raise
Lots 250-252 Tied back together with a 10% raise for opening bid

252B

Tri Axle Goose Neck Trailer
Tri Axle Goose Neck Trailer NO TITLE! 18'6"x7'6" bed. Needs tires and hos not deck boards. Selling with a bill of sale only. NO TITLE

253

3/8" Steel Angle Iron
Approx. 25- 3x4"x17' of 3/8" Steel Angle Iron

254

3/8" Steel Angle Iron
Approx. 25- 3x4"x17' of 3/8" Steel Angle Iron

255

Six 13 #4 Rebar
Approx. 200- 20' size 13 #4 rebar

256

Steel Pipe
Steel Pipe 45" Diameter x 181" Long also includes 60" piece

257

(2) 10" Galvanized Steel Pipe
(2) pieces of 10" Galvanized Steel Pipe (1) 25' and (1) 14' long

258

21'x12" Steel Pipe
21'x12" Steel Pipe

259

(3) 10'x12" Steel Pipe
(3) pieces of 10'x12" Steel Pipe

260

(8) pieces of 10"x10' Steel Pipe
(8) pieces of 10"x10' Steel Pipe

261

10'x13" Steel Pipe
10'x13" Steel Pipe

262

(2) Rolls of Mesh
(2) Rolls of Mesh 13' wide and approx. 100' long

263

(2) Wall Sq. Tubing
(2) pieces of 6"x3/16" Wall Sq. Tubing pieces (1) 20' and other (1) 117"

264

(2) 4" Angle Iron
(2) pieces of 4" Angle Iron: 127" long

265

(6)10" I Beam
(6) pieces of 10" I Beam that is 94" long

266

267

48" Wide Torch Tank Rack
48" Wide Torch Tank Rack

268

6x4' Chain Link Safety Cage with Steel Floor
6x4' Chain Link Safety Cage with Steel Floor

269

6x4' Chain Link Safety Cage with NO Floor
6x4' Chain Link Safety Cage with NO Floor