Rossi Group
Listing ID#: 437476

Sale Location

Winchester, VA 22601
Sale Dates and TimesSALE IS COMPLETED
Wednesday Oct 20, 2021 Completed
Thursday Oct 21, 2021 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.



 



 



 



 



 



 



 



Bidder Terms and Conditions


These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

 

  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 


  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Auction Conducted in the State of Indiana.

 


    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.


 

  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.



The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.



X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

 

  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

 

  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

 


    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.


 


    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.


 


    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.


 


    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.


 


    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.


 


    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.


 


    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.


 


    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.


 


    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,


(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 

    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.


 


    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.


 


    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.


 


    1. Online Bids. Online bids may not be reduced or retracted.


 

  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

 

  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

 

  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

 

  1.  

 

  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

 

  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

 

  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

 

  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

 

  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

 

  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.


  1.  

Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

 

  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the




vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

 

  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

 

  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

 

  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

 

  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

 

  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

 

  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

 

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

 

  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.









 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

 

  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

 

  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

 

  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

 

  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

 

  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

 

  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Listing Information
Liquidation of the flooring line and surplus sawmill equipment including, multiple Hasko machines, sorting lines, Baker resaw, loaders, forklifts, lots of new and used parts. Live, phone, and online bidding available.

1
READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot
This is a surplus equipment auction for VA Hardwood Flooring and
other of its members.   This is a great opportunity to purchase super
nice equipment (most ready to load).  The seller's maintenance crew will be on site to remove equipment and will be happy to give you 
a quote on removal.   Call Mark Bear 814-285-7365 for quotes and
scheduling 

All items must be gone December 21 or forfeited to new land owner.

Small items will be loaded "on the house" on Friday the 22 and Sat the 23rd.  After that there will be a charge and there will be charges for removal of equipment. 
 
All items selling as is where is with no expressed or implied warranties of any kind.  All descriptions are consiencely  described
but in now way implies warranty or use. 

10
Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20
9' x 13' x 50" high, electric drive, needs sprocket and chain on drive
Check out Lots 10-20 they make up a breakdown grading line, 1st lot of an entirety by request ONLY with 10% raise

11
Winston Machinery stick removal Belt Conveyor
21" x 12', 18" belt, no drive

12
Winston Machinery 5 Strand Incline Transfer Deck
9' x 13' x 50" high, electric drive

13
6 Strand Lumber Grading Chain
11' x 15'6" x 32" high, electric drive, C55B rooftop chain

14
Dead Rolls
50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

15
Winston 6 Strand Unscrambler Machinery
8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S 4' Stacker/Package Maker 

16
Winston Machinery 4 Strand Transfer Deck
12'8" x 26' x 56" high, electric drive

17
6 Strand Transfer Deck
13' x 13' x 48" high, electric drive, popup stops

18
Winston Machinery Belt Conveyor
3' x 17'6" x 44" high, 30" belt, electric drive
Infeed conveyor to Multi Gang Rip

19
Winston Machinery Roll Case
3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

20
Hydraulic Unit
Tag on motor is missing

20a
* mcc and VFD for Winston system
Weg cfw 8vector inverter plus

20b
* CH nema 0 and weg CFW08 plus controls
Last lot of entirety 

20C
*Winston Machine Complete Breakdown Line Infeed to Ripping Line
Breakdown hoist with stick removal 
landing table and transfer decks
stick removal belt. Items 10-20

21
Industrial Upcut Saw
Serial # 501L-9-343885, 14" blade, electric drive
Includes Foot Control

22
Industrial Upcut Saw
Serial # 501L-9-343585, 14" blade, electric drive

23
Kiln Carts
6 1/2" x 72", for 1 3/4" rails, 70 total

24
Hasko SR-24 Gang Saw
Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

24A
*New Arbor for Hasko Rip Saw
.

25
Belt Conveyor with 4 Cutoff Saws
5' x 70' overall, 16" belt, saws have 12" blades, electric drive

26
Hasko Flooring Machine side matcher Feed Table
 13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates
 

27
Hasko Matchmaster FSM 4-Sided side matcher
HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors on heads, (16) knife head hydraulic drive feed rolls.    The 75 HP hydraulic power pack not included with this lot is 30A and is the one for this machine includes dust tree. 9" bed plates. Includes console operation controls 

27A
*Matcher and Feed Table Control Panel
For Side Matcher and feed table

28
Yates American Profile Grinder
Serial # B-29393

29
Heads for Hasko Side Matcher
Heads for the  side matchers  and end matchers. 
head jointing units extra knives  There are thousands of dollars of heads
end matching heads, 16 knife and 12 knife planer heads and 
side matching pattern 
4" mechanic vise 

30
25 HP Hydraulic Pack
Was used on lot # 26 and 27

30A
75 HP Hydraulic Pack
Has oil cooler, located on the other side of the wall from lot # 30, marked 91A
it is for the Side Matcher

30A
75 HP Hydraulic Power Pack
For Match Master Side Matcher Feed

30B
Ingersoll-Rand Air Compressor
Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side of the wall from lot # 30, marked 91B

31
Waste Conveyor
10" x 22', 6" belt, 4" sides, electric drive

32
Waste Conveyor
20" x 55', 4" sides, 16" belt, electric drive

33
Waste Conveyor
13" x 80', 3" sides, 12" belt, electric drive

34
Waste Conveyor
17" x 24', 5" sides, 13" belt, electric drive

35
Waste Conveyor
12" x 15' on incline, additional 10'

36
Waste Conveyor
14" x 12', 5" sides, 12" belt, electric drive

37
Waste Conveyor
17 1/2" x 28' x 35" high

38
Cornell Automated Cutoff Saw
Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

39
Cornell Waste Conveyor
23" x 7', 6" sides, 19" belt, electric drive

40
Waste Conveyor and Metal Detector
17" x 17', 4" sides, 12" belt, electric drive
with metal detector controls on wall

41
Williams Patent Crusher and Pulveriser
Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

42
Lincoln Electric Motor
100 HP, 1785 RPM, 405T frame

42A
*Starter and Disconnect for Hog
100 HP motor control soft start

43
6" Tailing Belt
8" x 26' x 42" high

44
Wooden slat conveyor at chop saws
12' x 28' x 60" high, electric drive

45
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060811, 7 1/2 HP

45A
*Control For Upcut Saw

46
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060810, 7 1/2 HP

46A
*Control For Upcut Saw

47
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060809, 7 1/2 HP

47A
*Control For Upcut Saw

48
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060812, 7 1/2 HP

48A
*Control For Upcut Saw

49
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 0603-11, 7 1/2 HP

49A
*Control For Upcut Saw

50
Wooden board slat conveyor transfer
5' x 36' x 60" high, electric drive

51
Hasko HSEM-C End Matcher system
Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

52
Waste Conveyor
9" x 26', 4" sides, 6" belt

53
Belt Conveyor with Nesting Stations
14" x 42', 4" sides, 12" belt, electric drive
transfers to nesting 6. 7'x 15" nesters. 

54
Belt Conveyor
51" x 9' x 54" high, electric drive, 30" belt

55
Wooden Conveyor
5' x 28' x 50" high

56
Belt Conveyor
16" x 60' x 32" high, electric drive

57
Nesting station Belt Conveyor
4 7' x 15" nesting bays with feed through belt. 
16" x 60' x 32" high, electric drive

58
Wood slat transfer table
60" x 24' x 41" high, electric drive. 
For finished flooring. 

59
Wooden Board slat transfer conveyor
60" x 24' x 41" high, electric drive for finished flooring 

60
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive for finished flooring 

61
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive. For finished flooring. 

62
Belt Conveyors
5 conveyors welded together, 6"-16" belts, 20' long, electric drive

63
Banding Machine
Includes skate rolls, 1/2" plastic banding

63a
4 packing carts
4x7 various lengths

64
Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts
Belt fasteners

65
Skids of Parts

66
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

67
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

68
Landen Strapping Machine
Model TPS-2000, serial # 0000081, 3 phase, not in working order

69
Flexband Plastic Banding
1/2" wide, 9900' per roll, 19 rolls

70
Wooden Cabinets and All Parts
Lots of brand new parts including: sprockets, chain, bolts, nuts, bushings, fuses, etc.

71
48" Blower
75 HP electric motor

72
Landen Strapping Machine
Model TPS-2000, serial # 1705, 1/2" plastic banding, 3 phase

73
Perske Electric Motor
30 HP, 3450 RPM

74
Perske Electric Motor
25 HP, 3520 RPM

75
Ingersoll-Rand Air Compressor
Model 253, serial # 30T655908

76
Titan Industrial Heavy Duty Shop Press
50 ton capacity

77
30" Patton Fan

78
Wooden Cabinet and Contents
Grease, hydraulic motor, and miscellaneous parts

79
Wooden Cabinet and Contents
Cylinders, filters, bushings, bearings, etc.

80
Steel Rack and Contents
Electric motor, etc.

81
Yates American C50 Gang Saw
Serial # B-21766-R, 12" blades, 60 HP electric motor

82
Cart and Parts for Gang
Spacers, blades, etc., 12" blades, 3 1/2" arbor

83
Wooden Crate filled with Belts

84
Pallet of Bolts, Nuts, and Miscellaneous Parts

85
Braketron Motor Brake, Electric Motor

86
Weinig Profimat 22 N 5 Head Moulder
Model P22N, machine # 226-6988, 9" head, 1 1/2" arbor, 4 sided with dust tree

87
Belt Conveyor
13" x 19' x 48" high, 3" sides, 12" belt, electric drive

88
Ingersoll-Rand Air Compressor
Model # 2525, serial # 6035526, 7 1/2 HP electric motor, approx. 200 gallon vertical tank

89
All Dust Pipe on Inside of Building
4"-24" diameter

90
Skid of Belts
4"-49 1/2" wide, various lengths

91
48" Carolina Dust Blower
W/ 125 hp motor 

91a
*telemecanique Square D
Ali start 46. 

92
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame

93
36" Carolina Blower
30 HP electric motor

103C

94
48" Carolina Blower
No drive

95
Lincoln Electric Motor
100 HP, 1765 RPM, 405T frame

96
Mac bag house Dust Bin with Air Lock
17' diameter x approx. 40' tall, includes structure steel
includes bag blow out unit 

97
Cyclone on Top of Tall Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

98
Cyclone on Top of Short Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

99
Dust Cyclone
18' diameter x approx. 25' tall, includes structure steel to roof

100
All Dust Pipe on Outside of Building

101
1992 Industrial Wood Boiler
Model WWF-690-250, serial # RMP69001, heating surface 4045 sq. foot, includes all parts in boiler  shut down by.boiler company  water treatment steam valves. 

101A
*Silo Unloader
electric drive, in silo behind boiler

102
1972 Cleaver Brooks LP Boiler
Serial L-54637, model CB100-400, this boiler was in good working condition whey they shut down, includes all parts and accessories for boiler

102A
*Water Conditioner
Was used to treat water going to boiler, 80" x 80" x 100" tall

102B
*Well-X-Trol Pressure Tank
Model # WX-302, 24" x 49"

102C
*Inswool Ceramic Fiber Blanket
1" thick x 25' long, 7 boxes

103
Steam-Pak LP Boiler
Model SPH600-6-116678, serial # 682909H41548, not in working condition

103A
48" Dust Blower
75 HP electric motor

103B
DeWalt Radial Arm Saw

103C
*12" Powermatic Tablesaw
Model 72A, serial # 9572014, electric drive

103D
*Walker Turner Drill Press

104
Newman S-382 2 Sided Planer
Serial # 14510, 6" x 30" capacity, spiral cutter heads, 40 HP motor on bottom arbor, 75 HP on top arbor, includes hydraulic pack for feed rolls, 25' infeed, 11' outfeed

105
Mereen-Johnson 424DC Multi Gang Rip Saw
Model 424-DC, serial # MJ-4134, top arbor, 12" blades, electric drive, good condition

106
Lumberline Laser System
6 lasers, includes steel frame to floor

107
Electric Lift Table
4' x 8'

108
5 Strand Transfer Deck
12'6" x 15' x 34" high, H-78-B rooftop chain, does not include shaft that connects it to lot # 109, no drive

109
5 Strand Transfer Deck
11' x 46' x 34" high, electric drive

110
Adjustable Lumber Carts
50" x 7', extends to 11'

111
Adjustable Lumber Carts
50" x 7', extends to 11'

112
Adjustable Lumber Carts
50" x 7', extends to 11'

113
Adjustable Lumber Carts
50" x 7', extends to 11'

114
3 Strand Transfer Deck
12' x 16', electric drive, 1st lot of an entirety

114A
5 Strand Transfer Deck
12' x 10', electric drive

114B
Unscrambler and Transfer Deck After Unscrambler
16' wide, electric drive

114C
Entirety Lot # 114-114B
With 10% raise

115
Transfer Deck With 8’ Tilt Hoist
12' x 30', electric drive, 1st lot of an entirety
8' tilt hoist.  

116
15 HP Hydraulic Pack
Was used for lot # 115

117
Stick removal Conveyor belt
18" x 26', 11" belt, electric drive

118
5 Strand Transfer Deck
12' x 12'6", air popup stops, electric drive

119
Cornell Unscrambler
6' x 11', electric drive

120
Grating chain/Infeed for Trim Saw
10'6" x 30', even end rolls, electric drive

121
Cornell Trim Saw
24" blades, 2 blade, 16' capacity, waste conveyor, electric drive

122
6 Strand Transfer Deck
10'3" x 110' x 39" high, electric drive

122A
Entirety Lot 115-122
With 10% raise

122B
600 amp AB Motor Control Center
Allen-Bradley Centerline Motor Control Center.  600 amp with Allen Bradley motor control box with operator control over grating chain

122C
Parts for Cornell grate and trim line
81x repair chain links, 1st aid kits enclosed in locker cabinet

123
Ingersoll-Rand Air Compressor
Model 242, serial # 30T861092, 5 HP electric 3 phase motor, approx. 120 gallon vertical tank

124
Transfer Deck With Tilt Hoist
11'6" x 38', electric drive, 1st lot of an entirety

125
4 Strand Transfer Deck going to Drop Rolls
12' x 40', air popup stops

126
Waste Conveyor
14" x 23', 4 sides, 12" belt, electric drive

127
Waste Conveyor
19" x 18', 4" sides, 12" belt, on incline, electric drive

128
Drop Rolls to put Drying Sticks In
9' x 17', 8 1/2" x 6'5" rolls, raises up to 18', electric drive

129
Entirety Lot 124-128
With 10% raise

130
Lewco Skate Rolls
16" x 60'

131
Rack for Drying Sticks
7' x 8'

132
Cornell Roll Case
10' x 95', 8 1/2" x 9' rolls, 28" roll spacing, 2 1/2" shaft, missing 1 roll, the first 20' is live rolls, electric drive

140
CAT 920 Wheel Loader
Serial # 62K5626, hours are unavailable, includes 8' pin-on bucket, cab has A/C, CAT engine, runs and operates

141
CAT 950 Wheel Loader
Serial # 81J9507, meter reads 6926 hours, includes 86" pin-on grapple attachment, CAT engine, runs and operates

142
CAT V180B Forklift
Model V180B, serial # 68Y00956, meter reads 17,337 hours, 6' forks, 7' wide mast, 10'6" tall, CAT engine

143
Hyundai 70D-7E Forklift
PIN HHKHFZ11PD0002246, truck weight 25,527 lbs., 4' forks, mast 83" wide, 10'6" tall, hours unknown, NO MOTOR OR TRANSMISSION

144
20951 Road Grader
Serial # DV-230895, hours unknown, 12' blade, Cummins diesel engine, runs and operates

145
Cat V330B Forklift
Serial # 72Y01429, 33,000 lbs. lift, 13' mast height, Cat engine

146
1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120
Year: 1998
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: meter reads 26,713 miles
Plate:
Body Type: 2 Door Cab; Regular; Styleside
Trim Level: Standard; XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V6, 4.2L (256 CID); OHV
Fuel Type: Gasoline
Horsepower:
Transmission:
VIN #: 1FTZF1821WNB69120

Features and Notes: not currently in working condition

150
Westinghouse Electric Motor
7.5 HP, 3 PH, new in the crate

151
Westinghouse Electric Motor
5 HP, 3 PH, new in the crate

152
Electric Motors
50 HP, 20 HP, 25 HP, condition unknown

153
GE Electric Motor
75 HP, 3 PH, frame 405TS, loose

154
Schorch Electric Motor
150 HP, 3 PH, frame 445-2, loose

155
Electric Motor
150 HP, 3 PH, frame, 445-2, loose

156
Louis Allis Electric Motor
150 HP, 3 PH, frame 44TT, loose

157
Electric Motor
150 HP, 3 PH

159
40 HP Hydraulic Power Pack
Includes 3/4 HP electric pump, heat exchanger tank 22 1/2" x 71 1/2" x 31", good condition

160
Whirlwind Upcut Saw
Model 1000R, serial # S-3184602R, 12" blade, foot pedal

161
Pallet of No. 78 Chain

162
Gear Drive
With 5 HP electric drive, on steel frame

163
30 HP Hydraulic Power Pack
Serial # A-3275-A, 100 gallon tank

164
5 Barrels of Chain

165
2018 Baker Band Resaw
Model BBR-O"ABX", serial # 18-4878, 2" bands, 28" bandwheels, 40 HP electric drive, 11 1/2" belt, manual, excellent condition

165A
New Resaw Bands For Baker
Fits lot # 165, 14'2", 18 pieces in box, 2" wide

166
Electric Motor
15 HP, 30 HP

167
Armstrong Circle Saw Sharpener
Serial # 17400, 1 HP electric drive with control box. Manual

168
Vollmer Grinder
Fab No. 172, electric drive

169
Pallet of Blades
24" x 1 1/2" arbor

170
Electrical panel
Fused disconnect Starter

170A
American Scissor Lift
Model 2JA, serial # 4866-5, 4000 lbs. lift, foot pedal

171
20 HP Ploypac Hydraulic Power Pack
Serial # P87-351, 35 gallon, good condition

172
30 HP Hydraulic Power Pack
Cooling unit, tank 15" x 72" x 35" high, good condition

173
Gear Reduction Drive
13.6 HP, ratio 15.5

174
Pallet of Sprockets
8"-24"

175
Pallet of Electric Transformers

176
Pallet of H130 Chains

177
Pallet of H130 Chains

178
Large Box of Oil Filters
Big selection of sizes

179
Cabinet of Cat Parts

180
Washer Parts
22" x 35" x 35" high, on casters

181
Pallet of H130 Chains

182
Pallet of H138 Chains

183
Pallet of WHX124 Rex Chains

184
Pallet of Chains
Several types

185
5 HP Rucker Hydraulic Power Pack
Serial # 22331230A, 30 gallon

186
30 HP Ploypac Hydraulic Power Pack
No. P89-462, 90 gallons

187
Inovec Hydraulic Power Pack
Serial # A3275C, 2- 30 HP, 1- 2 HP electric drives, 150 gallons, good condition

188
Pallet of Rollers
8 3/4" x 36" rollers, with bearings, 5 pieces

189
Pallet of Rollers
8 3/4" x 30", with bearings, 5 pieces

190
Pallet of H-130 Chains

191
Pallet of Rex Log Deck Chains

192
Pallet of Grease Hose Reels
Good condition

193
Pallet of Electric Parts
Conduit, etc.

194
Pallet of FMP Storage Drawers
Brass fitting, bolts, etc., fully loaded

195
Container of Log Deck Parts

196
Container of Chains

197
Gear Reduction Drive
7.5 electric drive

198
Pallet of H130 Chains
2 skids

199
36 1/2" Pulley
8 groove, 6 1/2" hub, debarker chain

200
Transformer
Single phase, 25 KVA

201
40 HP Hydraulic Power Pack
Serial # 2536JOB7786, 24" x 59" x 26" high, heat exchanger

202
20 HP Mellott Hydraulic Pack
12 1/2" x 33" x 36", excellent condition

203
Container of AL1 Chains

204
Pallet of Miscellaneous
Reduction Gear Drive, line shaft with sprockets

205
Pallet of H130 Chain

206
Pallet of Log Trough Chain
12" wide

207
Gear Reduction Drives
7 pieces

208
Band-O-Matic Bander
DBI-8160, with 1/2" banding

209
Pallet of Miscellaneous
Electric motors, 10 HP, 14" saw blades, chains, etc.

210
Pallet of Chains
30 HP electric motor, chains are used for wooden conveyors

211
48" Box Fan
With electric drive

212
25 HP Electric Motor
3 PH, new in crate

213
Wall Vent
40" x 40", 2 pieces, new in crate

214
End Matching Chains
Used, miscellaneous parts

215
Pallet of Miscellaneous
Electric motors, gear boxes

216
Pallet of Rollers
6 3/4" x 48" rollers (6 pieces), 2 radiators

217
Pallet of Log Trough Chains

218
Square D Electrical Panel
With disconnect

219
Log Trough Chain
11 1/2" wide

220
Log Trough Chain
6" wide

222
Miscellaneous Box
Electric boxes, gear drive

223
40 HP Lincoln Electric Motor
3 PH, brand new

224
75 HP Electric Motor
3 PH, loose

225
50 HP Electric Motor
3 PH, new in crate

226
Pallet of Pulleys
Sprockets, gear drives

226A
20" Blower Fan
New in crate

227
20 HP Hydraulic Power Pack
With heat exchanger, 24" x 35" x 18"

228
Scissor Lift
Needs work

229
Barrel of Chains

230
Hydraulic Saddle Turner
Hydraulic drive, good drive

231
Hydraulic Saddle Turner
Hydraulic drive, good drive

232
Pallet of Chains
Gear drives, sprocket

233
Industrial Upcut Saw
Foot pedal, no blade, electric drive

234
Box of Miscellaneous
Chains, hydraulic hoses, control box

235
End Matching Chains
3 boxes

236
Pallet of Chains
Used for wooden conveyors

237
Pallet of Chains
Waste Conveyor

238
20 HP Hydraulic Power Pack
24" x 35 1/2" x 15" high tank

239
10 HP Hydraulic Power Pack
with heat exchanger, 20 1/2" x 34" x 19 1/2"

240
Box of Miscellaneous

241
National Vertical Air Tank
Serial # 12511

242
Box Miscellaneous
Cutter heads, chains, dynamitic control box

243
Paddle Waste Conveyor Chains

244
2 Pallets of Waste Conveyor Chains

245
Saddle Turner
Hydraulic drive, good condition

246
Barrel of Chains
3 barrels

247
Barrel of Chains

248
Barrel of Chains

249
Pallet of Chain Sprockets
Also has gear reductions

250
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

251
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

252
Yates E1 End Matching Machine
4 HP electric drive

253
Yates End Matching Machine
B-23800, 4 HP electric drive

254
Yates-American Flooring A23 Side Matcher
Model A23, serial # B-25902, 4 head, with electric panel

255
Lumber Rack
8 3/4" x 87 1/2" rollers, vertical air tank, live roll case 18" x 8', hydraulic drive

256
Yates-American Flooring A23 Sidematcher
Model A23, serial # 22990

257
Mattison Straight-line Rip Saw
Model 202, serial # 14141, table 65 1/2" x 77 1/2"

258
36" Blower
No drive, outlet 22" x 24", inlet 21"

259
36" Blower Fan
29" x 48" box with miscellaneous parts, seals, sprockets, etc.

260
52" Blower Fan
Hub 2 3/4", good condition

261
52" Blower Fan
Hub 2 3/4", good condition

262
52" Blower Fan
Hub 2 3/4", good condition

263
46" Blower Fan
Hub 2 3/4", 20" wide, good condition

264
34 1/2" Blower Fan
Hub 2 1/2", 14 3/4" wide, good condition

265
58" Precision Chipper
Serial # C.3732, 6 knife, very good condition

266
58" Precision Chipper
Serial # 3769, 6 knife, very good condition

267
Carriage Drum Drive
Sits on steel frame 51" x 102", gear is in good condition, motor has fire damage

268
Yates-American G-55 Planer
serial # B-29894, electric/hydraulic, electric drive

269
24" Cutoff Saw
Electric drive, hydraulic controls, 42" x 445" x 67" high

270
Electric Motor
125 HP, 3 PH, loose

271
250 HP Electric Motor
Frame 447TZ, 3 PH, good condition

271A
250 HP Electric Motor
Frame 447TZ, 3 PH, not electrically sound

272
Yates-American G-50 Planer
Serial # 24399, 50 HP drive

273
Williams Crusher and Pulverizer
Serial # 15456, 75 HP electric drive, top feed, bottom discharge

274
Scanning System

275
Waste Conveyor Chain

276
Unscrambler Chain

277
Filbert Stowell Band Head Rig
31" x 9' off bearing belt, hydraulic strain, 7' bandwheels, 13" wide, 1" meat

279
Oliver Straitoplane
Machine No. 170, serial # 96387, 36", electric drive

281
Pallet of Miscellaneous Parts
Pulleys 5 1/2"-19 1/2"

282
Pallet of Miscellaneous Parts
Electric motors, Ingersoll-Rand air compressor, gear box

283
Chipper Knives
Variety of sizes

284
Pallet of Rollers
8 1/2" x 49 3/4" rollers with bearings, 6 pieces

285
Pallet of Shafts
59" long

286
Jackson Cochrane Planer
No. 30, electric drive

287
Electric Panels

288
Benshaw Chipper Braking Starter
36" x 48"

289
Electrical Panel
48" x 72"

308d
Kiln components
Kiln 11, 12, 13, 14 with dell computer. Brother printer Variable feed drive

290
Paulson Horizontal Band Mill Diesel Engine
Fully hydraulic, 36" band wheels, ISUZU diesel engine, 4" band, 36" x 24' deck, log turner, extra bands, meter shows 1559 hours

291
Pallet of Storage Containers
Loaded with bolts, etc.

292
Mattison Straight-line Rip Saw
No blade, electric drive, 65" x 77 1/2" table

293
Tool Chest
13 drawer, 20" x 40"

294
Pallet of Filters
Oil and air

295
Pallet of Chains
Various sizes

296
Pallet of Gear Drives

297
1 1/4" Metal Banding
5 rolls

298
Pallet of Belts
New and used

299
Ridgid 300 Pipe Threader

300
Hoses and Sprockets
Air, hydraulic hoses

301
Pallet of 12" Sprockets

302
Pallet of Paddle Chains

303
Pallet of Hydraulic Cylinders

304
Pallet of Miscellaneous
Electric motors, gear drives

305
Manual Scissor Lift

306
Pallet of Miscellaneous Parts
Seals, wire looms, bearings

307
Pallet of Miscellaneous
Milwaukee bench grinder, air impact, hand fuel pump

308
Grease Hose Reels

308f
Siemens 400 amp main
In kiln 11-14 kiln office includes GE 75 KVA transformer

308g
Kilns 5;6;7. Controls and components
three Lignomat. VFD cabinets. PLLC cabinets stripped. 
includes doors fans and all interior kiln components

308h
Track kiln components

309
Pallet of Rollers
8 1/2", 24"-42"

309A
Truck Tire Dolly

309B
PVC Fittings and Radiator

309C
Spinks Scale

309D
Liftrite Pallet Jack
5500 lb. lift, works

310
Wisconsin Gas Engine
Model VH40, serial # 5246516

310d
Oahu’s pro scout scales
With calibration weights

310e
kiln trek kiln components
Main for kiln controls For 11,12,13 and 14. No controls 
includes kiln components. Pipes doors fans vents.  
includes dell computer and brother printer only 

311
15 HP Hydraulic Power Pack
30" x 60" x 18" high

312
Riding Tennant Sweeper
Model 6500, serial # 6500-6821, GVW 5200, LP gas engine, meter shows 935 hours, condition unknown

313
ACME 1/2" Plastic Black Banding
3600 ft. per box, 28 boxes

314
ACME 1/2" Plastic Black Banding
3600 ft. per box, 18 boxes

315
Gempaint
End paint for dried lumber, heaters, pump included, 4 full barrels, 5 empty

316
Carriage Parts

317
3 Fans on Stands
30" and 32"

325
3 Used Tires
2- 20.5-25, 1- 15.5-25

328
ASM Unscrambler
10' x 17'6" x 6'4" tall, hydraulic drive 8 strands of welded bar chain

329
Debarker
No tag or any info on it, 12' infeed

330
Rack for Drying Sticks
7' x 8'

330A
Rack for Drying Sticks
7' x 8'

330B
Rack for Drying Sticks
7' x 8'

331
Rack for Drying Sticks
4' x 7'

331A
Rack for Drying Sticks
4' x 7'

331B
Rack for Drying Sticks
4' x 7'

331C
Rack for Drying Sticks
4' x 7'

331D
Rack for Drying Sticks
4' x 7'

331E
Rack for Drying Sticks
4' x 7'

331F
Rack for Drying Sticks
4' x 7'

331G
Rack for Drying Sticks
4' x 7'

331H
Rack for Drying Sticks
4' x 7'

331I
Rack for Drying Sticks
4' x 7'

331J
Rack for Drying Sticks
4' x 7'

331K
Rack for Drying Sticks
4' x 7'

331L
Rack for Drying Sticks
4' x 7'

331M
Rack for Drying Sticks
4' x 7'

332
Custom Built 4 HB Carriage
30" x 16' carriage

333
Operator's Cab
4' x 6' x 80" tall, Corley controls, needs glass replaced

334
Carriage Track
45" center to center x 48'

334A
Tyrone-Berry Feed and Drive
Model SMA-215, serial # A2186, DA-L/M4005. Pump and drum package 

334B
Entirety Lot # 332-334A
With 10% raise

335
Angled Spiral Rollcase and Transfer Deck
68" x 13', transfer going to rolls is 10', electric drive. First of the entirety of the TS manufacturing package maker

336
Spiral Roll Case
48" x 15' x 36" high, 9" x 36" rolls, 1 7/8" shaft, 27" roll spacing, every roll has a hydraulic motor. Not part ,Of the entirety 

337
T S Mfg package breakdown hoist
12'6" wide.  Part
of entirety. 337;338;339;335;339;340

338
3 Strand Transfer Deck
6' x 11' x 32" high, frame only, electric drive part of the TS Manufacturing 
stacking system. 335,337,338,338a,339,340

339
Breakdown hoist
11'6" x 13'6". With package deck

339a
Package maker stacker lay up table. Part of an entirety. 337;335;339 336:338;340

340
Transfer Deck
8' wide, 2 sections approx. 24' long

340a
T and S Manufacturing stacking components complete. 4’
Includes. 335,337,338,339,340,338a.  T and S stacker package maker. Ready to load seller or TAS have drawings.  
job number. 16994, entirety with 10% raise

340b
Hemco Lumber Sorter Series 43 Dismantled and ready to load
24 23 sorts 1 reject  Bay 16'  sorter disassembled and ready to load
standard Series 43 Sling Sorter Last Install Job 2745
Controls are available for this traditional sling sorter from USNR  
Situated at the Bradford Pa site
444 High Street Bradford PA  

341
5 Strand Transfer Deck
7' x 13' x 35" high, hydraulic drive, needs shaft on one end

342
Mellott Vibrating Conveyor
25" x 60' x 19" high, 19" pan, 4" sides, electric drive

343
Webster Vibrating Conveyor
33" x 12' x 23" high, 24" pan, 6" sides, electric drive

344
Balderson Bucket
21" center to center of quick attach, 2 1/8" mounting hole, 9' wide, for Cat loader

345
Balderson Bucket
23" center to center of quick attach, 2" mounting holes, 128" wide, for Cat loader

346
Loader Bucket
28" center to center of quick attach, 1 1/2" mounting hole, 103" wide, for Cat loader

346A
Loader Forks
28" center to center of quick attach, 1 1/2" mounting hole, 46" forks, for Cat loader

347
Roll Case
10' x 15' x 38" high, 8 1/2" x 108" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

348
Dead Rolls
16" x 20', 4" x 12" rolls, 12" roll spacing, 1 1/4" shaft

349
Spiral Roll Case
56" x 18' x 46" high, 9" x 42" rolls, 22" roll spacing, 2 3/8" shaft, needs bearings replaced, no drive

350
Roll Case
41" x 18' x 33" high, 8 1/2" x 30" rolls, 30" roll spacing, 2" shaft, has shaft to mount transfer deck

351
Hanchett knife Sharpener
Size 38", type DN, shop # 8063

352
Power Transmission
5 HP electric motor

353
Overhead Hoist System
7' x 11' x 12' tall, 2 ton hoist

354
Mereen-Johnson Gangsaw
Model 424-DC, serial # MJ5173, for parts or to rebuild

355
Steel Rack and Shafts with Sprockets
2"-4" shafts, various lengths

356
Coils for Dry Kilns

356A
*4 Strand Log Deck
10' 4" x 17', rebuilt with new chain, new bearings, electric drive

357
Adjustable Lumber Cart
42" x 98"

358
Adjustable Lumber Cart
42" x 98"

359
Adjustable Lumber Cart
42" x 98"

360
Adjustable Lumber Cart
42" x 98"

361
Adjustable Lumber Cart
42" x 98"

362
Adjustable Lumber Cart
42" x 98"

363
Adjustable Lumber Cart
42" x 98"

364
Adjustable Lumber Cart
42" x 98"

365
Adjustable Lumber Cart
42" x 98"

366
Adjustable Lumber Cart
42" x 98"

367
Lumber Cart
42" x 84"

368
Lumber Cart
42" x 84"

369
Lumber Cart
42" x 84"

370
Adjustable Lumber Cart
42" x 98"

371
Lumber Cart
42" x 84"

372
Lumber Cart
42" x 84"

373
Adjustable Lumber Cart
42" x 98"

374
Rack for Drying Sticks
4' x 7'

375
Adjustable Lumber Cart
42" x 98"

375A
*Chain Conveyor
18" x 30' x 28" high, electric motor

376
Adjustable Lumber Cart
42" x 98"

378
Adjustable Lumber Cart
42" x 98"

379
Adjustable Lumber Cart
42" x 98"

380
Adjustable Lumber Cart
42" x 98"

381
Lumber Cart
41" x 96", includes 4 x 4's

382
Lumber Cart
42" x 84"

404
Vecoplan Electric Panel
30" x 36" x 12" deep

383
Lumber Cart
42" x 84"

384
Adjustable Lumber Cart
42" x 98"

384A
Heat Ducts, Louvers Etc.

385
Electric Motor and Roller
Weg motor, 15 hp, 3520 RPM, 16" x 16" roller, Newco 150 steel WCB 77, 4" long 2 1/2" steel bar

386
Ductwork for Electrical Wiring
6" x 6" ducts, 30' of ducts

386A
Rack for Drying Sticks
7' x 8'

387
ACME Saw Sharpener
Bench model saw sharpener

388
H 78B Rooftop Chain
for transfer deck

408
Yaskawa V1000 Electrical Switches
27 total V1000 switches, 3- WAGO 787-880 electrical switches, 2- WAGO 787-742 electrical switches, 1- WAGO 787-740 electrical switch

389
Electric Motor and Steel Bars
SEW-Eurodrive Inc. electric motor, 5 HP, 1680 RPM, 49 1/2" steel bars, 20 total, 4 arched steel pieces

390
Electric Motors
Marathon electric motor- 5 HP, 1740 RPM, 184T frame, Hernco electric motor- 1 HP, 1725 RPM, 143T frame, US Electrical electric motor- 5 HP, 1440 RPM, 184T frame

391
Century Electric Motor
Baldor electric motor- 7 HP, 1140 RPM, 215C frame, A.C. electric motor- 15 HP, 1750 RPM, 254TC frame, Thermoid 8-004-104, 9" plates, 20 total

392
Blade for Blower
2" blade

393
Pipe and Sand Paper
7" duct pipe, 3' long, 7 drainpipe elbows, 2- 36" rolls of sand paper

394
Pipe and Sandpaper

395
Mac Bags for bag house
14 boxes

396
Exhaust Fan Blades
4' blades, 1 1/2" axis, 4 replacement blades total

420
Assorted Electrical Switches
Yaskawa V1000 switches, Wago 787-881, Wago 787-742, etc.

397
Worm Gear Winch with Mounting Blocks
Model 664-SLRFX, Tulsa Worm Gear Winch

398
Square Duct Frames and Storage Containers
3- 39" x 39" x 5" deep, 4- 45 1/2" x 37" x 3 1/2" deep, 7 duct frames total, 1- 32" x 40" x 10" deep container, 1- 46" x 45" x 14" deep container

399
AJAX Auto Transformer Starter
Part # RH-49831-1, 125/150 HP, 440 Volts, mounted in 28" x 32" x 12" deep box

400
Gate Valves
1- 2" axis, 2- 2 1/2" axis, 1- 3" axis, 1- 3 1/2" axis, 5 valves total

401
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame, appears to be brand new

402
Bosch Hydraulic Oil Pumps
Smaller pump serial # 090-62111-04330, part # 0513300202, larger pump's pump # 6513870216

403
Electric Motors and Metal Straps
Westinghouse Life-Line electric motor serial # 7909, 10 HP, 1650 RPM, 215T frame, Delco electric motor serial # 068, 5 HP, 1465 RPM, 215T frame

405
Gear Wheels, Clamps, Oil Dry Powder
4- 12" gear wheels, 13- 4" clamps, 5 bags of oil dry powder

406
Ingersoll-Rand Air Compressor 30T
Model 2475N5, serial #C807072

407
Uline Bander Cart
21" x 24" x 38" high

409
Grizzly Dust Collector
Electrical drive, mounted on portable platform

410
Electric Motors Band Saw
Shop Craft band saw, 10" blade, electric, 3 electric motors, assorted electrical parts

411
Ingersoll-Rand Industrial Air Compressor
Model 2425N, serial # 696220, 30T, vertical tank

412
QL Kiln
Model 40GL, lab oven, electric motor, 16" x 20" x 32" tall

413
Powermatic Band Saw
Model 043, serial # 92430433, 3/4 HP electric motor

414
Ingersoll-Rand Air Compressor
Model 242, serial # 720294, 5 HP motor, 30T, horizontal tank

415
Craftsman Tool Chest and Kiln
18" x 27" x 48" tall, loaded with tools, 11" belt for conveyor, small lab oven 16" x 20" x 31" tall

416
Electric Motors, Extension Cords, etc.
6 electric motors, air hose, 22" bart chain for chain saw, caulk gun

417
Saw Blades and Assorted Saw Mill Parts
2- 12" circle saw blades, steel blades, scale chop saw dust catcher, etc.

418
Grinding Wheels
4"-12" wheel, other miscellaneous parts

419
Assorted Steel Parts
Old steel bars, wheels, plates, etc.

421
Assorted Tools
Wrenches, pipe wrenches, air tools and parts, etc.

422
Grinders

423
Dependable Machine Company Inc. Knife Sharpener
Model 152-A, serial # A2532

424
Rondamat 934 Knife Sharpener
Model R-934, machine # 934-426

425
Sutton Knife Sharpener
Serial # 268

426
Wheel Loader Forks
48" forks, fit Cat wheel loader, pin-in style

427
*Ingersoll Rand Air Compressor
5 HP electric motor, 100 gal. tank

428
*Bearings and Misc. Parts

429
*Parts for Conveyors

430
*Steel Banding
3/4" x .023, 10 rolls

431
*Dust Blower
Size 60-6,

432
*Fins for Dry Kilns
Approx. 35 pcs. 18' long, brand new

434
*Wax Tank with Honda Engine

435
*Titan Industrial Hoist
5' high

450
Shelf Loaded with Steel Pipe Fittings
Elbows, adapter, connectors, faucet handles, unions, nipples, hangers, etc.

451
Shelf Loaded with Steel Pipe Fittings
Nipples, unions, elbows, T's, adapter, etc.

452
Metal Shelving with Tools
2' x 3' x 8' high shelf, pvc pipe fittings, 24" circle saw blade in good condition, miscellaneous fasteners, fittings, auto parts, wax pump and sprayer

453
Ingersoll-Rand Air Compressor
Model 216, serial # 6972835, 2 HP electric motor

454
Tool Bench Organizer Loaded with Parts
Assorted nuts, bolts, screws, pulleys, washers, grinder wheels, etc.

455
Cole Tool Bench Vise Grip

456
Columbian Bench Vise Grip

457
File Cabinets
2 white cabinets, 14" x 25" x 29" high, filled with miscellaneous shop/office items, gray cabinet 26" x 14" x 51" high, filled with miscellaneous items

458
Large Shelf Loaded with Miscellaneous Shop Items
Plumbing, electrical, auto parts, etc.

459
Shelf Loaded with Miscellaneous Items
Lots of welding rods, box of lumber crayons, , hand tools, fittings, etc.

460
Shelf Loaded with Miscellaneous Items
Wire, conduit fittings, electrical panels and switches, sandpaper, spray paint, etc.

461
Large Rack with Lots of Steel
Steel pipes, rods, etc.

462
Metal-Cutting Band Saw
1 HP electric motor

463
Set of Steel Saw Horses
25" x 54" x 29" tall

464
Torch Set
19" x 10" rack for tanks, 26" x 36" overall

465
John Deere Riding Lawn Mower
PIN MOL133A102932, 42" deck, 13 hp motor, condition unknown

466
Toro Snow Blower
Serial # 9001031, 32" blade, condition unknown

467
DeWalt Air Compressor
1.6 HP electric motor, 15 gallon tank, 200 PSI max

468
Campbell Hausfield Air Compressor
20 gallon tank, 150 max PSI, electric motor

469
Wilson Welder
Not in working condition

470
Shelf with Miscellaneous Parts
Auto parts, bolts, pins, washers, nuts, chain, etc.

471
Craftsman Tool Chest Loaded with Tools
Nuts, bolts, assorted fasteners and hard rods

472
Parker Hydraulic Hose Crimping Machine
Includes bench mounted vise grip, organizer full of hydraulic fittings, 1.5 HP electric motor

473
Steel Fittings and Heating Bulbs
Assorted steel pipe fittings, 25W LED heating bulbs, etc.

474
Propane Tank Clamps, etc.
15 lbs. propane tank, 1 gallon gas jug, chain hooks, assorted clamps, etc.

475
Electric Motors and Hoist
Century electric motor 3 HP, 1735 RPM, Baldor electric motor 7.5 HP, 3450 RPM, U.S. electric motor 7.5 HP, Budgit 2 ton electric hoist

476
Assorted Belts
Assorted sizes

477
Hydraulic Hoses
3/4" hoses

478
Scrap Steel
Steel bars, plates, pipes, etc.

479
Handy-Man Jack

480
Floor Jack
Walker heavy duty floor jack

481
Electric Motor and Scrap Steel
Marathon electric motor, 7.5 HP, 3450 RPM, 184JMV frame

482
Handtools and Auto Parts
Large assortment of wrenches and other hand tools, brand new set of shocks, air filter, carburetor, etc.

483
Assorted Shop Tools
20 ton hydraulic jack, band saw blades, 4 gallon backpack style sprayer, skill saw, air nailer, etc.

484
Famco 25R Manual Press

485
Powermatic Drill Press
Model 1150A, serial # 94155168, 7.5 HP electric motor

486
Sprockets and Bearings
All items in room
Photo Gallery

Gallery 1 (2000 images)          Gallery 2 (939 images)
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

Rossi Group

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:
Sale Location
600 N Kent Street
Winchester, VA 22601
Sale Dates and Times
Wednesday Oct 20, 2021 Completed
Thursday Oct 21, 2021 Completed
Sale Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Liquidation of the flooring line and surplus sawmill equipment including, multiple Hasko machines, sorting lines, Baker resaw, loaders, forklifts, lots of new and used parts. Live, phone, and online bidding available.

1
READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot
This is a surplus equipment auction for VA Hardwood Flooring and
other of its members.   This is a great opportunity to purchase super
nice equipment (most ready to load).  The seller's maintenance crew will be on site to remove equipment and will be happy to give you 
a quote on removal.   Call Mark Bear 814-285-7365 for quotes and
scheduling 

All items must be gone December 21 or forfeited to new land owner.

Small items will be loaded "on the house" on Friday the 22 and Sat the 23rd.  After that there will be a charge and there will be charges for removal of equipment. 
 
All items selling as is where is with no expressed or implied warranties of any kind.  All descriptions are consiencely  described
but in now way implies warranty or use. 

10
Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20
9' x 13' x 50" high, electric drive, needs sprocket and chain on drive
Check out Lots 10-20 they make up a breakdown grading line, 1st lot of an entirety by request ONLY with 10% raise

11
Winston Machinery stick removal Belt Conveyor
21" x 12', 18" belt, no drive

12
Winston Machinery 5 Strand Incline Transfer Deck
9' x 13' x 50" high, electric drive

13
6 Strand Lumber Grading Chain
11' x 15'6" x 32" high, electric drive, C55B rooftop chain

14
Dead Rolls
50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

15
Winston 6 Strand Unscrambler Machinery
8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S 4' Stacker/Package Maker 

16
Winston Machinery 4 Strand Transfer Deck
12'8" x 26' x 56" high, electric drive

17
6 Strand Transfer Deck
13' x 13' x 48" high, electric drive, popup stops

18
Winston Machinery Belt Conveyor
3' x 17'6" x 44" high, 30" belt, electric drive
Infeed conveyor to Multi Gang Rip

19
Winston Machinery Roll Case
3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

20
Hydraulic Unit
Tag on motor is missing

20a
* mcc and VFD for Winston system
Weg cfw 8vector inverter plus

20b
* CH nema 0 and weg CFW08 plus controls
Last lot of entirety 

20C
*Winston Machine Complete Breakdown Line Infeed to Ripping Line
Breakdown hoist with stick removal 
landing table and transfer decks
stick removal belt. Items 10-20

21
Industrial Upcut Saw
Serial # 501L-9-343885, 14" blade, electric drive
Includes Foot Control

22
Industrial Upcut Saw
Serial # 501L-9-343585, 14" blade, electric drive

23
Kiln Carts
6 1/2" x 72", for 1 3/4" rails, 70 total

24
Hasko SR-24 Gang Saw
Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

24A
*New Arbor for Hasko Rip Saw
.

25
Belt Conveyor with 4 Cutoff Saws
5' x 70' overall, 16" belt, saws have 12" blades, electric drive

26
Hasko Flooring Machine side matcher Feed Table
 13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates
 

27
Hasko Matchmaster FSM 4-Sided side matcher
HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors on heads, (16) knife head hydraulic drive feed rolls.    The 75 HP hydraulic power pack not included with this lot is 30A and is the one for this machine includes dust tree. 9" bed plates. Includes console operation controls 

27A
*Matcher and Feed Table Control Panel
For Side Matcher and feed table

28
Yates American Profile Grinder
Serial # B-29393

29
Heads for Hasko Side Matcher
Heads for the  side matchers  and end matchers. 
head jointing units extra knives  There are thousands of dollars of heads
end matching heads, 16 knife and 12 knife planer heads and 
side matching pattern 
4" mechanic vise 

30
25 HP Hydraulic Pack
Was used on lot # 26 and 27

30A
75 HP Hydraulic Pack
Has oil cooler, located on the other side of the wall from lot # 30, marked 91A
it is for the Side Matcher

30A
75 HP Hydraulic Power Pack
For Match Master Side Matcher Feed

30B
Ingersoll-Rand Air Compressor
Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side of the wall from lot # 30, marked 91B

31
Waste Conveyor
10" x 22', 6" belt, 4" sides, electric drive

32
Waste Conveyor
20" x 55', 4" sides, 16" belt, electric drive

33
Waste Conveyor
13" x 80', 3" sides, 12" belt, electric drive

34
Waste Conveyor
17" x 24', 5" sides, 13" belt, electric drive

35
Waste Conveyor
12" x 15' on incline, additional 10'

36
Waste Conveyor
14" x 12', 5" sides, 12" belt, electric drive

37
Waste Conveyor
17 1/2" x 28' x 35" high

38
Cornell Automated Cutoff Saw
Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

39
Cornell Waste Conveyor
23" x 7', 6" sides, 19" belt, electric drive

40
Waste Conveyor and Metal Detector
17" x 17', 4" sides, 12" belt, electric drive
with metal detector controls on wall

41
Williams Patent Crusher and Pulveriser
Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

42
Lincoln Electric Motor
100 HP, 1785 RPM, 405T frame

42A
*Starter and Disconnect for Hog
100 HP motor control soft start

43
6" Tailing Belt
8" x 26' x 42" high

44
Wooden slat conveyor at chop saws
12' x 28' x 60" high, electric drive

45
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060811, 7 1/2 HP

45A
*Control For Upcut Saw

46
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060810, 7 1/2 HP

46A
*Control For Upcut Saw

47
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060809, 7 1/2 HP

47A
*Control For Upcut Saw

48
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060812, 7 1/2 HP

48A
*Control For Upcut Saw

49
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 0603-11, 7 1/2 HP

49A
*Control For Upcut Saw

50
Wooden board slat conveyor transfer
5' x 36' x 60" high, electric drive

51
Hasko HSEM-C End Matcher system
Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

52
Waste Conveyor
9" x 26', 4" sides, 6" belt

53
Belt Conveyor with Nesting Stations
14" x 42', 4" sides, 12" belt, electric drive
transfers to nesting 6. 7'x 15" nesters. 

54
Belt Conveyor
51" x 9' x 54" high, electric drive, 30" belt

55
Wooden Conveyor
5' x 28' x 50" high

56
Belt Conveyor
16" x 60' x 32" high, electric drive

57
Nesting station Belt Conveyor
4 7' x 15" nesting bays with feed through belt. 
16" x 60' x 32" high, electric drive

58
Wood slat transfer table
60" x 24' x 41" high, electric drive. 
For finished flooring. 

59
Wooden Board slat transfer conveyor
60" x 24' x 41" high, electric drive for finished flooring 

60
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive for finished flooring 

61
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive. For finished flooring. 

62
Belt Conveyors
5 conveyors welded together, 6"-16" belts, 20' long, electric drive

63
Banding Machine
Includes skate rolls, 1/2" plastic banding

63a
4 packing carts
4x7 various lengths

64
Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts
Belt fasteners

65
Skids of Parts

66
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

67
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

68
Landen Strapping Machine
Model TPS-2000, serial # 0000081, 3 phase, not in working order

69
Flexband Plastic Banding
1/2" wide, 9900' per roll, 19 rolls

70
Wooden Cabinets and All Parts
Lots of brand new parts including: sprockets, chain, bolts, nuts, bushings, fuses, etc.

71
48" Blower
75 HP electric motor

72
Landen Strapping Machine
Model TPS-2000, serial # 1705, 1/2" plastic banding, 3 phase

73
Perske Electric Motor
30 HP, 3450 RPM

74
Perske Electric Motor
25 HP, 3520 RPM

75
Ingersoll-Rand Air Compressor
Model 253, serial # 30T655908

76
Titan Industrial Heavy Duty Shop Press
50 ton capacity

77
30" Patton Fan

78
Wooden Cabinet and Contents
Grease, hydraulic motor, and miscellaneous parts

79
Wooden Cabinet and Contents
Cylinders, filters, bushings, bearings, etc.

80
Steel Rack and Contents
Electric motor, etc.

81
Yates American C50 Gang Saw
Serial # B-21766-R, 12" blades, 60 HP electric motor

82
Cart and Parts for Gang
Spacers, blades, etc., 12" blades, 3 1/2" arbor

83
Wooden Crate filled with Belts

84
Pallet of Bolts, Nuts, and Miscellaneous Parts

85
Braketron Motor Brake, Electric Motor

86
Weinig Profimat 22 N 5 Head Moulder
Model P22N, machine # 226-6988, 9" head, 1 1/2" arbor, 4 sided with dust tree

87
Belt Conveyor
13" x 19' x 48" high, 3" sides, 12" belt, electric drive

88
Ingersoll-Rand Air Compressor
Model # 2525, serial # 6035526, 7 1/2 HP electric motor, approx. 200 gallon vertical tank

89
All Dust Pipe on Inside of Building
4"-24" diameter

90
Skid of Belts
4"-49 1/2" wide, various lengths

91
48" Carolina Dust Blower
W/ 125 hp motor 

91a
*telemecanique Square D
Ali start 46. 

92
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame

93
36" Carolina Blower
30 HP electric motor

103C

94
48" Carolina Blower
No drive

95
Lincoln Electric Motor
100 HP, 1765 RPM, 405T frame

96
Mac bag house Dust Bin with Air Lock
17' diameter x approx. 40' tall, includes structure steel
includes bag blow out unit 

97
Cyclone on Top of Tall Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

98
Cyclone on Top of Short Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

99
Dust Cyclone
18' diameter x approx. 25' tall, includes structure steel to roof

100
All Dust Pipe on Outside of Building

101
1992 Industrial Wood Boiler
Model WWF-690-250, serial # RMP69001, heating surface 4045 sq. foot, includes all parts in boiler  shut down by.boiler company  water treatment steam valves. 

101A
*Silo Unloader
electric drive, in silo behind boiler

102
1972 Cleaver Brooks LP Boiler
Serial L-54637, model CB100-400, this boiler was in good working condition whey they shut down, includes all parts and accessories for boiler

102A
*Water Conditioner
Was used to treat water going to boiler, 80" x 80" x 100" tall

102B
*Well-X-Trol Pressure Tank
Model # WX-302, 24" x 49"

102C
*Inswool Ceramic Fiber Blanket
1" thick x 25' long, 7 boxes

103
Steam-Pak LP Boiler
Model SPH600-6-116678, serial # 682909H41548, not in working condition

103A
48" Dust Blower
75 HP electric motor

103B
DeWalt Radial Arm Saw

103C
*12" Powermatic Tablesaw
Model 72A, serial # 9572014, electric drive

103D
*Walker Turner Drill Press

104
Newman S-382 2 Sided Planer
Serial # 14510, 6" x 30" capacity, spiral cutter heads, 40 HP motor on bottom arbor, 75 HP on top arbor, includes hydraulic pack for feed rolls, 25' infeed, 11' outfeed

105
Mereen-Johnson 424DC Multi Gang Rip Saw
Model 424-DC, serial # MJ-4134, top arbor, 12" blades, electric drive, good condition

106
Lumberline Laser System
6 lasers, includes steel frame to floor

107
Electric Lift Table
4' x 8'

108
5 Strand Transfer Deck
12'6" x 15' x 34" high, H-78-B rooftop chain, does not include shaft that connects it to lot # 109, no drive

109
5 Strand Transfer Deck
11' x 46' x 34" high, electric drive

110
Adjustable Lumber Carts
50" x 7', extends to 11'

111
Adjustable Lumber Carts
50" x 7', extends to 11'

112
Adjustable Lumber Carts
50" x 7', extends to 11'

113
Adjustable Lumber Carts
50" x 7', extends to 11'

114
3 Strand Transfer Deck
12' x 16', electric drive, 1st lot of an entirety

114A
5 Strand Transfer Deck
12' x 10', electric drive

114B
Unscrambler and Transfer Deck After Unscrambler
16' wide, electric drive

114C
Entirety Lot # 114-114B
With 10% raise

115
Transfer Deck With 8’ Tilt Hoist
12' x 30', electric drive, 1st lot of an entirety
8' tilt hoist.  

116
15 HP Hydraulic Pack
Was used for lot # 115

117
Stick removal Conveyor belt
18" x 26', 11" belt, electric drive

118
5 Strand Transfer Deck
12' x 12'6", air popup stops, electric drive

119
Cornell Unscrambler
6' x 11', electric drive

120
Grating chain/Infeed for Trim Saw
10'6" x 30', even end rolls, electric drive

121
Cornell Trim Saw
24" blades, 2 blade, 16' capacity, waste conveyor, electric drive

122
6 Strand Transfer Deck
10'3" x 110' x 39" high, electric drive

122A
Entirety Lot 115-122
With 10% raise

122B
600 amp AB Motor Control Center
Allen-Bradley Centerline Motor Control Center.  600 amp with Allen Bradley motor control box with operator control over grating chain

122C
Parts for Cornell grate and trim line
81x repair chain links, 1st aid kits enclosed in locker cabinet

123
Ingersoll-Rand Air Compressor
Model 242, serial # 30T861092, 5 HP electric 3 phase motor, approx. 120 gallon vertical tank

124
Transfer Deck With Tilt Hoist
11'6" x 38', electric drive, 1st lot of an entirety

125
4 Strand Transfer Deck going to Drop Rolls
12' x 40', air popup stops

126
Waste Conveyor
14" x 23', 4 sides, 12" belt, electric drive

127
Waste Conveyor
19" x 18', 4" sides, 12" belt, on incline, electric drive

128
Drop Rolls to put Drying Sticks In
9' x 17', 8 1/2" x 6'5" rolls, raises up to 18', electric drive

129
Entirety Lot 124-128
With 10% raise

130
Lewco Skate Rolls
16" x 60'

131
Rack for Drying Sticks
7' x 8'

132
Cornell Roll Case
10' x 95', 8 1/2" x 9' rolls, 28" roll spacing, 2 1/2" shaft, missing 1 roll, the first 20' is live rolls, electric drive

140
CAT 920 Wheel Loader
Serial # 62K5626, hours are unavailable, includes 8' pin-on bucket, cab has A/C, CAT engine, runs and operates

141
CAT 950 Wheel Loader
Serial # 81J9507, meter reads 6926 hours, includes 86" pin-on grapple attachment, CAT engine, runs and operates

142
CAT V180B Forklift
Model V180B, serial # 68Y00956, meter reads 17,337 hours, 6' forks, 7' wide mast, 10'6" tall, CAT engine

143
Hyundai 70D-7E Forklift
PIN HHKHFZ11PD0002246, truck weight 25,527 lbs., 4' forks, mast 83" wide, 10'6" tall, hours unknown, NO MOTOR OR TRANSMISSION

144
20951 Road Grader
Serial # DV-230895, hours unknown, 12' blade, Cummins diesel engine, runs and operates

145
Cat V330B Forklift
Serial # 72Y01429, 33,000 lbs. lift, 13' mast height, Cat engine

146
1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120
Year: 1998
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: meter reads 26,713 miles
Plate:
Body Type: 2 Door Cab; Regular; Styleside
Trim Level: Standard; XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V6, 4.2L (256 CID); OHV
Fuel Type: Gasoline
Horsepower:
Transmission:
VIN #: 1FTZF1821WNB69120

Features and Notes: not currently in working condition

150
Westinghouse Electric Motor
7.5 HP, 3 PH, new in the crate

151
Westinghouse Electric Motor
5 HP, 3 PH, new in the crate

152
Electric Motors
50 HP, 20 HP, 25 HP, condition unknown

153
GE Electric Motor
75 HP, 3 PH, frame 405TS, loose

154
Schorch Electric Motor
150 HP, 3 PH, frame 445-2, loose

155
Electric Motor
150 HP, 3 PH, frame, 445-2, loose

156
Louis Allis Electric Motor
150 HP, 3 PH, frame 44TT, loose

157
Electric Motor
150 HP, 3 PH

159
40 HP Hydraulic Power Pack
Includes 3/4 HP electric pump, heat exchanger tank 22 1/2" x 71 1/2" x 31", good condition

160
Whirlwind Upcut Saw
Model 1000R, serial # S-3184602R, 12" blade, foot pedal

161
Pallet of No. 78 Chain

162
Gear Drive
With 5 HP electric drive, on steel frame

163
30 HP Hydraulic Power Pack
Serial # A-3275-A, 100 gallon tank

164
5 Barrels of Chain

165
2018 Baker Band Resaw
Model BBR-O"ABX", serial # 18-4878, 2" bands, 28" bandwheels, 40 HP electric drive, 11 1/2" belt, manual, excellent condition

165A
New Resaw Bands For Baker
Fits lot # 165, 14'2", 18 pieces in box, 2" wide

166
Electric Motor
15 HP, 30 HP

167
Armstrong Circle Saw Sharpener
Serial # 17400, 1 HP electric drive with control box. Manual

168
Vollmer Grinder
Fab No. 172, electric drive

169
Pallet of Blades
24" x 1 1/2" arbor

170
Electrical panel
Fused disconnect Starter

170A
American Scissor Lift
Model 2JA, serial # 4866-5, 4000 lbs. lift, foot pedal

171
20 HP Ploypac Hydraulic Power Pack
Serial # P87-351, 35 gallon, good condition

172
30 HP Hydraulic Power Pack
Cooling unit, tank 15" x 72" x 35" high, good condition

173
Gear Reduction Drive
13.6 HP, ratio 15.5

174
Pallet of Sprockets
8"-24"

175
Pallet of Electric Transformers

176
Pallet of H130 Chains

177
Pallet of H130 Chains

178
Large Box of Oil Filters
Big selection of sizes

179
Cabinet of Cat Parts

180
Washer Parts
22" x 35" x 35" high, on casters

181
Pallet of H130 Chains

182
Pallet of H138 Chains

183
Pallet of WHX124 Rex Chains

184
Pallet of Chains
Several types

185
5 HP Rucker Hydraulic Power Pack
Serial # 22331230A, 30 gallon

186
30 HP Ploypac Hydraulic Power Pack
No. P89-462, 90 gallons

187
Inovec Hydraulic Power Pack
Serial # A3275C, 2- 30 HP, 1- 2 HP electric drives, 150 gallons, good condition

188
Pallet of Rollers
8 3/4" x 36" rollers, with bearings, 5 pieces

189
Pallet of Rollers
8 3/4" x 30", with bearings, 5 pieces

190
Pallet of H-130 Chains

191
Pallet of Rex Log Deck Chains

192
Pallet of Grease Hose Reels
Good condition

193
Pallet of Electric Parts
Conduit, etc.

194
Pallet of FMP Storage Drawers
Brass fitting, bolts, etc., fully loaded

195
Container of Log Deck Parts

196
Container of Chains

197
Gear Reduction Drive
7.5 electric drive

198
Pallet of H130 Chains
2 skids

199
36 1/2" Pulley
8 groove, 6 1/2" hub, debarker chain

200
Transformer
Single phase, 25 KVA

201
40 HP Hydraulic Power Pack
Serial # 2536JOB7786, 24" x 59" x 26" high, heat exchanger

202
20 HP Mellott Hydraulic Pack
12 1/2" x 33" x 36", excellent condition

203
Container of AL1 Chains

204
Pallet of Miscellaneous
Reduction Gear Drive, line shaft with sprockets

205
Pallet of H130 Chain

206
Pallet of Log Trough Chain
12" wide

207
Gear Reduction Drives
7 pieces

208
Band-O-Matic Bander
DBI-8160, with 1/2" banding

209
Pallet of Miscellaneous
Electric motors, 10 HP, 14" saw blades, chains, etc.

210
Pallet of Chains
30 HP electric motor, chains are used for wooden conveyors

211
48" Box Fan
With electric drive

212
25 HP Electric Motor
3 PH, new in crate

213
Wall Vent
40" x 40", 2 pieces, new in crate

214
End Matching Chains
Used, miscellaneous parts

215
Pallet of Miscellaneous
Electric motors, gear boxes

216
Pallet of Rollers
6 3/4" x 48" rollers (6 pieces), 2 radiators

217
Pallet of Log Trough Chains

218
Square D Electrical Panel
With disconnect

219
Log Trough Chain
11 1/2" wide

220
Log Trough Chain
6" wide

222
Miscellaneous Box
Electric boxes, gear drive

223
40 HP Lincoln Electric Motor
3 PH, brand new

224
75 HP Electric Motor
3 PH, loose

225
50 HP Electric Motor
3 PH, new in crate

226
Pallet of Pulleys
Sprockets, gear drives

226A
20" Blower Fan
New in crate

227
20 HP Hydraulic Power Pack
With heat exchanger, 24" x 35" x 18"

228
Scissor Lift
Needs work

229
Barrel of Chains

230
Hydraulic Saddle Turner
Hydraulic drive, good drive

231
Hydraulic Saddle Turner
Hydraulic drive, good drive

232
Pallet of Chains
Gear drives, sprocket

233
Industrial Upcut Saw
Foot pedal, no blade, electric drive

234
Box of Miscellaneous
Chains, hydraulic hoses, control box

235
End Matching Chains
3 boxes

236
Pallet of Chains
Used for wooden conveyors

237
Pallet of Chains
Waste Conveyor

238
20 HP Hydraulic Power Pack
24" x 35 1/2" x 15" high tank

239
10 HP Hydraulic Power Pack
with heat exchanger, 20 1/2" x 34" x 19 1/2"

240
Box of Miscellaneous

241
National Vertical Air Tank
Serial # 12511

242
Box Miscellaneous
Cutter heads, chains, dynamitic control box

243
Paddle Waste Conveyor Chains

244
2 Pallets of Waste Conveyor Chains

245
Saddle Turner
Hydraulic drive, good condition

246
Barrel of Chains
3 barrels

247
Barrel of Chains

248
Barrel of Chains

249
Pallet of Chain Sprockets
Also has gear reductions

250
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

251
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

252
Yates E1 End Matching Machine
4 HP electric drive

253
Yates End Matching Machine
B-23800, 4 HP electric drive

254
Yates-American Flooring A23 Side Matcher
Model A23, serial # B-25902, 4 head, with electric panel

255
Lumber Rack
8 3/4" x 87 1/2" rollers, vertical air tank, live roll case 18" x 8', hydraulic drive

256
Yates-American Flooring A23 Sidematcher
Model A23, serial # 22990

257
Mattison Straight-line Rip Saw
Model 202, serial # 14141, table 65 1/2" x 77 1/2"

258
36" Blower
No drive, outlet 22" x 24", inlet 21"

259
36" Blower Fan
29" x 48" box with miscellaneous parts, seals, sprockets, etc.

260
52" Blower Fan
Hub 2 3/4", good condition

261
52" Blower Fan
Hub 2 3/4", good condition

262
52" Blower Fan
Hub 2 3/4", good condition

263
46" Blower Fan
Hub 2 3/4", 20" wide, good condition

264
34 1/2" Blower Fan
Hub 2 1/2", 14 3/4" wide, good condition

265
58" Precision Chipper
Serial # C.3732, 6 knife, very good condition

266
58" Precision Chipper
Serial # 3769, 6 knife, very good condition

267
Carriage Drum Drive
Sits on steel frame 51" x 102", gear is in good condition, motor has fire damage

268
Yates-American G-55 Planer
serial # B-29894, electric/hydraulic, electric drive

269
24" Cutoff Saw
Electric drive, hydraulic controls, 42" x 445" x 67" high

270
Electric Motor
125 HP, 3 PH, loose

271
250 HP Electric Motor
Frame 447TZ, 3 PH, good condition

271A
250 HP Electric Motor
Frame 447TZ, 3 PH, not electrically sound

272
Yates-American G-50 Planer
Serial # 24399, 50 HP drive

273
Williams Crusher and Pulverizer
Serial # 15456, 75 HP electric drive, top feed, bottom discharge

274
Scanning System

275
Waste Conveyor Chain

276
Unscrambler Chain

277
Filbert Stowell Band Head Rig
31" x 9' off bearing belt, hydraulic strain, 7' bandwheels, 13" wide, 1" meat

279
Oliver Straitoplane
Machine No. 170, serial # 96387, 36", electric drive

281
Pallet of Miscellaneous Parts
Pulleys 5 1/2"-19 1/2"

282
Pallet of Miscellaneous Parts
Electric motors, Ingersoll-Rand air compressor, gear box

283
Chipper Knives
Variety of sizes

284
Pallet of Rollers
8 1/2" x 49 3/4" rollers with bearings, 6 pieces

285
Pallet of Shafts
59" long

286
Jackson Cochrane Planer
No. 30, electric drive

287
Electric Panels

288
Benshaw Chipper Braking Starter
36" x 48"

289
Electrical Panel
48" x 72"

308d
Kiln components
Kiln 11, 12, 13, 14 with dell computer. Brother printer Variable feed drive

290
Paulson Horizontal Band Mill Diesel Engine
Fully hydraulic, 36" band wheels, ISUZU diesel engine, 4" band, 36" x 24' deck, log turner, extra bands, meter shows 1559 hours

291
Pallet of Storage Containers
Loaded with bolts, etc.

292
Mattison Straight-line Rip Saw
No blade, electric drive, 65" x 77 1/2" table

293
Tool Chest
13 drawer, 20" x 40"

294
Pallet of Filters
Oil and air

295
Pallet of Chains
Various sizes

296
Pallet of Gear Drives

297
1 1/4" Metal Banding
5 rolls

298
Pallet of Belts
New and used

299
Ridgid 300 Pipe Threader

300
Hoses and Sprockets
Air, hydraulic hoses

301
Pallet of 12" Sprockets

302
Pallet of Paddle Chains

303
Pallet of Hydraulic Cylinders

304
Pallet of Miscellaneous
Electric motors, gear drives

305
Manual Scissor Lift

306
Pallet of Miscellaneous Parts
Seals, wire looms, bearings

307
Pallet of Miscellaneous
Milwaukee bench grinder, air impact, hand fuel pump

308
Grease Hose Reels

308f
Siemens 400 amp main
In kiln 11-14 kiln office includes GE 75 KVA transformer

308g
Kilns 5;6;7. Controls and components
three Lignomat. VFD cabinets. PLLC cabinets stripped. 
includes doors fans and all interior kiln components

308h
Track kiln components

309
Pallet of Rollers
8 1/2", 24"-42"

309A
Truck Tire Dolly

309B
PVC Fittings and Radiator

309C
Spinks Scale

309D
Liftrite Pallet Jack
5500 lb. lift, works

310
Wisconsin Gas Engine
Model VH40, serial # 5246516

310d
Oahu’s pro scout scales
With calibration weights

310e
kiln trek kiln components
Main for kiln controls For 11,12,13 and 14. No controls 
includes kiln components. Pipes doors fans vents.  
includes dell computer and brother printer only 

311
15 HP Hydraulic Power Pack
30" x 60" x 18" high

312
Riding Tennant Sweeper
Model 6500, serial # 6500-6821, GVW 5200, LP gas engine, meter shows 935 hours, condition unknown

313
ACME 1/2" Plastic Black Banding
3600 ft. per box, 28 boxes

314
ACME 1/2" Plastic Black Banding
3600 ft. per box, 18 boxes

315
Gempaint
End paint for dried lumber, heaters, pump included, 4 full barrels, 5 empty

316
Carriage Parts

317
3 Fans on Stands
30" and 32"

325
3 Used Tires
2- 20.5-25, 1- 15.5-25

328
ASM Unscrambler
10' x 17'6" x 6'4" tall, hydraulic drive 8 strands of welded bar chain

329
Debarker
No tag or any info on it, 12' infeed

330
Rack for Drying Sticks
7' x 8'

330A
Rack for Drying Sticks
7' x 8'

330B
Rack for Drying Sticks
7' x 8'

331
Rack for Drying Sticks
4' x 7'

331A
Rack for Drying Sticks
4' x 7'

331B
Rack for Drying Sticks
4' x 7'

331C
Rack for Drying Sticks
4' x 7'

331D
Rack for Drying Sticks
4' x 7'

331E
Rack for Drying Sticks
4' x 7'

331F
Rack for Drying Sticks
4' x 7'

331G
Rack for Drying Sticks
4' x 7'

331H
Rack for Drying Sticks
4' x 7'

331I
Rack for Drying Sticks
4' x 7'

331J
Rack for Drying Sticks
4' x 7'

331K
Rack for Drying Sticks
4' x 7'

331L
Rack for Drying Sticks
4' x 7'

331M
Rack for Drying Sticks
4' x 7'

332
Custom Built 4 HB Carriage
30" x 16' carriage

333
Operator's Cab
4' x 6' x 80" tall, Corley controls, needs glass replaced

334
Carriage Track
45" center to center x 48'

334A
Tyrone-Berry Feed and Drive
Model SMA-215, serial # A2186, DA-L/M4005. Pump and drum package 

334B
Entirety Lot # 332-334A
With 10% raise

335
Angled Spiral Rollcase and Transfer Deck
68" x 13', transfer going to rolls is 10', electric drive. First of the entirety of the TS manufacturing package maker

336
Spiral Roll Case
48" x 15' x 36" high, 9" x 36" rolls, 1 7/8" shaft, 27" roll spacing, every roll has a hydraulic motor. Not part ,Of the entirety 

337
T S Mfg package breakdown hoist
12'6" wide.  Part
of entirety. 337;338;339;335;339;340

338
3 Strand Transfer Deck
6' x 11' x 32" high, frame only, electric drive part of the TS Manufacturing 
stacking system. 335,337,338,338a,339,340

339
Breakdown hoist
11'6" x 13'6". With package deck

339a
Package maker stacker lay up table. Part of an entirety. 337;335;339 336:338;340

340
Transfer Deck
8' wide, 2 sections approx. 24' long

340a
T and S Manufacturing stacking components complete. 4’
Includes. 335,337,338,339,340,338a.  T and S stacker package maker. Ready to load seller or TAS have drawings.  
job number. 16994, entirety with 10% raise

340b
Hemco Lumber Sorter Series 43 Dismantled and ready to load
24 23 sorts 1 reject  Bay 16'  sorter disassembled and ready to load
standard Series 43 Sling Sorter Last Install Job 2745
Controls are available for this traditional sling sorter from USNR  
Situated at the Bradford Pa site
444 High Street Bradford PA  

341
5 Strand Transfer Deck
7' x 13' x 35" high, hydraulic drive, needs shaft on one end

342
Mellott Vibrating Conveyor
25" x 60' x 19" high, 19" pan, 4" sides, electric drive

343
Webster Vibrating Conveyor
33" x 12' x 23" high, 24" pan, 6" sides, electric drive

344
Balderson Bucket
21" center to center of quick attach, 2 1/8" mounting hole, 9' wide, for Cat loader

345
Balderson Bucket
23" center to center of quick attach, 2" mounting holes, 128" wide, for Cat loader

346
Loader Bucket
28" center to center of quick attach, 1 1/2" mounting hole, 103" wide, for Cat loader

346A
Loader Forks
28" center to center of quick attach, 1 1/2" mounting hole, 46" forks, for Cat loader

347
Roll Case
10' x 15' x 38" high, 8 1/2" x 108" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

348
Dead Rolls
16" x 20', 4" x 12" rolls, 12" roll spacing, 1 1/4" shaft

349
Spiral Roll Case
56" x 18' x 46" high, 9" x 42" rolls, 22" roll spacing, 2 3/8" shaft, needs bearings replaced, no drive

350
Roll Case
41" x 18' x 33" high, 8 1/2" x 30" rolls, 30" roll spacing, 2" shaft, has shaft to mount transfer deck

351
Hanchett knife Sharpener
Size 38", type DN, shop # 8063

352
Power Transmission
5 HP electric motor

353
Overhead Hoist System
7' x 11' x 12' tall, 2 ton hoist

354
Mereen-Johnson Gangsaw
Model 424-DC, serial # MJ5173, for parts or to rebuild

355
Steel Rack and Shafts with Sprockets
2"-4" shafts, various lengths

356
Coils for Dry Kilns

356A
*4 Strand Log Deck
10' 4" x 17', rebuilt with new chain, new bearings, electric drive

357
Adjustable Lumber Cart
42" x 98"

358
Adjustable Lumber Cart
42" x 98"

359
Adjustable Lumber Cart
42" x 98"

360
Adjustable Lumber Cart
42" x 98"

361
Adjustable Lumber Cart
42" x 98"

362
Adjustable Lumber Cart
42" x 98"

363
Adjustable Lumber Cart
42" x 98"

364
Adjustable Lumber Cart
42" x 98"

365
Adjustable Lumber Cart
42" x 98"

366
Adjustable Lumber Cart
42" x 98"

367
Lumber Cart
42" x 84"

368
Lumber Cart
42" x 84"

369
Lumber Cart
42" x 84"

370
Adjustable Lumber Cart
42" x 98"

371
Lumber Cart
42" x 84"

372
Lumber Cart
42" x 84"

373
Adjustable Lumber Cart
42" x 98"

374
Rack for Drying Sticks
4' x 7'

375
Adjustable Lumber Cart
42" x 98"

375A
*Chain Conveyor
18" x 30' x 28" high, electric motor

376
Adjustable Lumber Cart
42" x 98"

378
Adjustable Lumber Cart
42" x 98"

379
Adjustable Lumber Cart
42" x 98"

380
Adjustable Lumber Cart
42" x 98"

381
Lumber Cart
41" x 96", includes 4 x 4's

382
Lumber Cart
42" x 84"

404
Vecoplan Electric Panel
30" x 36" x 12" deep

383
Lumber Cart
42" x 84"

384
Adjustable Lumber Cart
42" x 98"

384A
Heat Ducts, Louvers Etc.

385
Electric Motor and Roller
Weg motor, 15 hp, 3520 RPM, 16" x 16" roller, Newco 150 steel WCB 77, 4" long 2 1/2" steel bar

386
Ductwork for Electrical Wiring
6" x 6" ducts, 30' of ducts

386A
Rack for Drying Sticks
7' x 8'

387
ACME Saw Sharpener
Bench model saw sharpener

388
H 78B Rooftop Chain
for transfer deck

408
Yaskawa V1000 Electrical Switches
27 total V1000 switches, 3- WAGO 787-880 electrical switches, 2- WAGO 787-742 electrical switches, 1- WAGO 787-740 electrical switch

389
Electric Motor and Steel Bars
SEW-Eurodrive Inc. electric motor, 5 HP, 1680 RPM, 49 1/2" steel bars, 20 total, 4 arched steel pieces

390
Electric Motors
Marathon electric motor- 5 HP, 1740 RPM, 184T frame, Hernco electric motor- 1 HP, 1725 RPM, 143T frame, US Electrical electric motor- 5 HP, 1440 RPM, 184T frame

391
Century Electric Motor
Baldor electric motor- 7 HP, 1140 RPM, 215C frame, A.C. electric motor- 15 HP, 1750 RPM, 254TC frame, Thermoid 8-004-104, 9" plates, 20 total

392
Blade for Blower
2" blade

393
Pipe and Sand Paper
7" duct pipe, 3' long, 7 drainpipe elbows, 2- 36" rolls of sand paper

394
Pipe and Sandpaper

395
Mac Bags for bag house
14 boxes

396
Exhaust Fan Blades
4' blades, 1 1/2" axis, 4 replacement blades total

420
Assorted Electrical Switches
Yaskawa V1000 switches, Wago 787-881, Wago 787-742, etc.

397
Worm Gear Winch with Mounting Blocks
Model 664-SLRFX, Tulsa Worm Gear Winch

398
Square Duct Frames and Storage Containers
3- 39" x 39" x 5" deep, 4- 45 1/2" x 37" x 3 1/2" deep, 7 duct frames total, 1- 32" x 40" x 10" deep container, 1- 46" x 45" x 14" deep container

399
AJAX Auto Transformer Starter
Part # RH-49831-1, 125/150 HP, 440 Volts, mounted in 28" x 32" x 12" deep box

400
Gate Valves
1- 2" axis, 2- 2 1/2" axis, 1- 3" axis, 1- 3 1/2" axis, 5 valves total

401
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame, appears to be brand new

402
Bosch Hydraulic Oil Pumps
Smaller pump serial # 090-62111-04330, part # 0513300202, larger pump's pump # 6513870216

403
Electric Motors and Metal Straps
Westinghouse Life-Line electric motor serial # 7909, 10 HP, 1650 RPM, 215T frame, Delco electric motor serial # 068, 5 HP, 1465 RPM, 215T frame

405
Gear Wheels, Clamps, Oil Dry Powder
4- 12" gear wheels, 13- 4" clamps, 5 bags of oil dry powder

406
Ingersoll-Rand Air Compressor 30T
Model 2475N5, serial #C807072

407
Uline Bander Cart
21" x 24" x 38" high

409
Grizzly Dust Collector
Electrical drive, mounted on portable platform

410
Electric Motors Band Saw
Shop Craft band saw, 10" blade, electric, 3 electric motors, assorted electrical parts

411
Ingersoll-Rand Industrial Air Compressor
Model 2425N, serial # 696220, 30T, vertical tank

412
QL Kiln
Model 40GL, lab oven, electric motor, 16" x 20" x 32" tall

413
Powermatic Band Saw
Model 043, serial # 92430433, 3/4 HP electric motor

414
Ingersoll-Rand Air Compressor
Model 242, serial # 720294, 5 HP motor, 30T, horizontal tank

415
Craftsman Tool Chest and Kiln
18" x 27" x 48" tall, loaded with tools, 11" belt for conveyor, small lab oven 16" x 20" x 31" tall

416
Electric Motors, Extension Cords, etc.
6 electric motors, air hose, 22" bart chain for chain saw, caulk gun

417
Saw Blades and Assorted Saw Mill Parts
2- 12" circle saw blades, steel blades, scale chop saw dust catcher, etc.

418
Grinding Wheels
4"-12" wheel, other miscellaneous parts

419
Assorted Steel Parts
Old steel bars, wheels, plates, etc.

421
Assorted Tools
Wrenches, pipe wrenches, air tools and parts, etc.

422
Grinders

423
Dependable Machine Company Inc. Knife Sharpener
Model 152-A, serial # A2532

424
Rondamat 934 Knife Sharpener
Model R-934, machine # 934-426

425
Sutton Knife Sharpener
Serial # 268

426
Wheel Loader Forks
48" forks, fit Cat wheel loader, pin-in style

427
*Ingersoll Rand Air Compressor
5 HP electric motor, 100 gal. tank

428
*Bearings and Misc. Parts

429
*Parts for Conveyors

430
*Steel Banding
3/4" x .023, 10 rolls

431
*Dust Blower
Size 60-6,

432
*Fins for Dry Kilns
Approx. 35 pcs. 18' long, brand new

434
*Wax Tank with Honda Engine

435
*Titan Industrial Hoist
5' high

450
Shelf Loaded with Steel Pipe Fittings
Elbows, adapter, connectors, faucet handles, unions, nipples, hangers, etc.

451
Shelf Loaded with Steel Pipe Fittings
Nipples, unions, elbows, T's, adapter, etc.

452
Metal Shelving with Tools
2' x 3' x 8' high shelf, pvc pipe fittings, 24" circle saw blade in good condition, miscellaneous fasteners, fittings, auto parts, wax pump and sprayer

453
Ingersoll-Rand Air Compressor
Model 216, serial # 6972835, 2 HP electric motor

454
Tool Bench Organizer Loaded with Parts
Assorted nuts, bolts, screws, pulleys, washers, grinder wheels, etc.

455
Cole Tool Bench Vise Grip

456
Columbian Bench Vise Grip

457
File Cabinets
2 white cabinets, 14" x 25" x 29" high, filled with miscellaneous shop/office items, gray cabinet 26" x 14" x 51" high, filled with miscellaneous items

458
Large Shelf Loaded with Miscellaneous Shop Items
Plumbing, electrical, auto parts, etc.

459
Shelf Loaded with Miscellaneous Items
Lots of welding rods, box of lumber crayons, , hand tools, fittings, etc.

460
Shelf Loaded with Miscellaneous Items
Wire, conduit fittings, electrical panels and switches, sandpaper, spray paint, etc.

461
Large Rack with Lots of Steel
Steel pipes, rods, etc.

462
Metal-Cutting Band Saw
1 HP electric motor

463
Set of Steel Saw Horses
25" x 54" x 29" tall

464
Torch Set
19" x 10" rack for tanks, 26" x 36" overall

465
John Deere Riding Lawn Mower
PIN MOL133A102932, 42" deck, 13 hp motor, condition unknown

466
Toro Snow Blower
Serial # 9001031, 32" blade, condition unknown

467
DeWalt Air Compressor
1.6 HP electric motor, 15 gallon tank, 200 PSI max

468
Campbell Hausfield Air Compressor
20 gallon tank, 150 max PSI, electric motor

469
Wilson Welder
Not in working condition

470
Shelf with Miscellaneous Parts
Auto parts, bolts, pins, washers, nuts, chain, etc.

471
Craftsman Tool Chest Loaded with Tools
Nuts, bolts, assorted fasteners and hard rods

472
Parker Hydraulic Hose Crimping Machine
Includes bench mounted vise grip, organizer full of hydraulic fittings, 1.5 HP electric motor

473
Steel Fittings and Heating Bulbs
Assorted steel pipe fittings, 25W LED heating bulbs, etc.

474
Propane Tank Clamps, etc.
15 lbs. propane tank, 1 gallon gas jug, chain hooks, assorted clamps, etc.

475
Electric Motors and Hoist
Century electric motor 3 HP, 1735 RPM, Baldor electric motor 7.5 HP, 3450 RPM, U.S. electric motor 7.5 HP, Budgit 2 ton electric hoist

476
Assorted Belts
Assorted sizes

477
Hydraulic Hoses
3/4" hoses

478
Scrap Steel
Steel bars, plates, pipes, etc.

479
Handy-Man Jack

480
Floor Jack
Walker heavy duty floor jack

481
Electric Motor and Scrap Steel
Marathon electric motor, 7.5 HP, 3450 RPM, 184JMV frame

482
Handtools and Auto Parts
Large assortment of wrenches and other hand tools, brand new set of shocks, air filter, carburetor, etc.

483
Assorted Shop Tools
20 ton hydraulic jack, band saw blades, 4 gallon backpack style sprayer, skill saw, air nailer, etc.

484
Famco 25R Manual Press

485
Powermatic Drill Press
Model 1150A, serial # 94155168, 7.5 HP electric motor

486
Sprockets and Bearings
All items in room
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Rossi Group
 Live Auction
 
Sale Date(s)
Wednesday Oct 20, 2021 Completed
Thursday Oct 21, 2021 Completed
Sale Location

Winchester, VA 22601
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Liquidation of the flooring line and surplus sawmill equipment including, multiple Hasko machines, sorting lines, Baker resaw, loaders, forklifts, lots of new and used parts. Live, phone, and online bidding available.

1
READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot
This is a surplus equipment auction for VA Hardwood Flooring and
other of its members.   This is a great opportunity to purchase super
nice equipment (most ready to load).  The seller's maintenance crew will be on site to remove equipment and will be happy to give you 
a quote on removal.   Call Mark Bear 814-285-7365 for quotes and
scheduling 

All items must be gone December 21 or forfeited to new land owner.

Small items will be loaded "on the house" on Friday the 22 and Sat the 23rd.  After that there will be a charge and there will be charges for removal of equipment. 
 
All items selling as is where is with no expressed or implied warranties of any kind.  All descriptions are consiencely  described
but in now way implies warranty or use. 

10
Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20
9' x 13' x 50" high, electric drive, needs sprocket and chain on drive
Check out Lots 10-20 they make up a breakdown grading line, 1st lot of an entirety by request ONLY with 10% raise

11
Winston Machinery stick removal Belt Conveyor
21" x 12', 18" belt, no drive

12
Winston Machinery 5 Strand Incline Transfer Deck
9' x 13' x 50" high, electric drive

13
6 Strand Lumber Grading Chain
11' x 15'6" x 32" high, electric drive, C55B rooftop chain

14
Dead Rolls
50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

15
Winston 6 Strand Unscrambler Machinery
8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S 4' Stacker/Package Maker 

16
Winston Machinery 4 Strand Transfer Deck
12'8" x 26' x 56" high, electric drive

17
6 Strand Transfer Deck
13' x 13' x 48" high, electric drive, popup stops

18
Winston Machinery Belt Conveyor
3' x 17'6" x 44" high, 30" belt, electric drive
Infeed conveyor to Multi Gang Rip

19
Winston Machinery Roll Case
3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

20
Hydraulic Unit
Tag on motor is missing

20a
* mcc and VFD for Winston system
Weg cfw 8vector inverter plus

20b
* CH nema 0 and weg CFW08 plus controls
Last lot of entirety 

20C
*Winston Machine Complete Breakdown Line Infeed to Ripping Line
Breakdown hoist with stick removal 
landing table and transfer decks
stick removal belt. Items 10-20

21
Industrial Upcut Saw
Serial # 501L-9-343885, 14" blade, electric drive
Includes Foot Control

22
Industrial Upcut Saw
Serial # 501L-9-343585, 14" blade, electric drive

23
Kiln Carts
6 1/2" x 72", for 1 3/4" rails, 70 total

24
Hasko SR-24 Gang Saw
Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

24A
*New Arbor for Hasko Rip Saw
.

25
Belt Conveyor with 4 Cutoff Saws
5' x 70' overall, 16" belt, saws have 12" blades, electric drive

26
Hasko Flooring Machine side matcher Feed Table
 13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates
 

27
Hasko Matchmaster FSM 4-Sided side matcher
HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors on heads, (16) knife head hydraulic drive feed rolls.    The 75 HP hydraulic power pack not included with this lot is 30A and is the one for this machine includes dust tree. 9" bed plates. Includes console operation controls 

27A
*Matcher and Feed Table Control Panel
For Side Matcher and feed table

28
Yates American Profile Grinder
Serial # B-29393

29
Heads for Hasko Side Matcher
Heads for the  side matchers  and end matchers. 
head jointing units extra knives  There are thousands of dollars of heads
end matching heads, 16 knife and 12 knife planer heads and 
side matching pattern 
4" mechanic vise 

30
25 HP Hydraulic Pack
Was used on lot # 26 and 27

30A
75 HP Hydraulic Pack
Has oil cooler, located on the other side of the wall from lot # 30, marked 91A
it is for the Side Matcher

30A
75 HP Hydraulic Power Pack
For Match Master Side Matcher Feed

30B
Ingersoll-Rand Air Compressor
Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side of the wall from lot # 30, marked 91B

31
Waste Conveyor
10" x 22', 6" belt, 4" sides, electric drive

32
Waste Conveyor
20" x 55', 4" sides, 16" belt, electric drive

33
Waste Conveyor
13" x 80', 3" sides, 12" belt, electric drive

34
Waste Conveyor
17" x 24', 5" sides, 13" belt, electric drive

35
Waste Conveyor
12" x 15' on incline, additional 10'

36
Waste Conveyor
14" x 12', 5" sides, 12" belt, electric drive

37
Waste Conveyor
17 1/2" x 28' x 35" high

38
Cornell Automated Cutoff Saw
Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

39
Cornell Waste Conveyor
23" x 7', 6" sides, 19" belt, electric drive

40
Waste Conveyor and Metal Detector
17" x 17', 4" sides, 12" belt, electric drive
with metal detector controls on wall

41
Williams Patent Crusher and Pulveriser
Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

42
Lincoln Electric Motor
100 HP, 1785 RPM, 405T frame

42A
*Starter and Disconnect for Hog
100 HP motor control soft start

43
6" Tailing Belt
8" x 26' x 42" high

44
Wooden slat conveyor at chop saws
12' x 28' x 60" high, electric drive

45
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060811, 7 1/2 HP

45A
*Control For Upcut Saw

46
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060810, 7 1/2 HP

46A
*Control For Upcut Saw

47
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060809, 7 1/2 HP

47A
*Control For Upcut Saw

48
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060812, 7 1/2 HP

48A
*Control For Upcut Saw

49
Crosscut Solutions Upcut Saw
Model CS14ML, serial # 0603-11, 7 1/2 HP

49A
*Control For Upcut Saw

50
Wooden board slat conveyor transfer
5' x 36' x 60" high, electric drive

51
Hasko HSEM-C End Matcher system
Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

52
Waste Conveyor
9" x 26', 4" sides, 6" belt

53
Belt Conveyor with Nesting Stations
14" x 42', 4" sides, 12" belt, electric drive
transfers to nesting 6. 7'x 15" nesters. 

54
Belt Conveyor
51" x 9' x 54" high, electric drive, 30" belt

55
Wooden Conveyor
5' x 28' x 50" high

56
Belt Conveyor
16" x 60' x 32" high, electric drive

57
Nesting station Belt Conveyor
4 7' x 15" nesting bays with feed through belt. 
16" x 60' x 32" high, electric drive

58
Wood slat transfer table
60" x 24' x 41" high, electric drive. 
For finished flooring. 

59
Wooden Board slat transfer conveyor
60" x 24' x 41" high, electric drive for finished flooring 

60
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive for finished flooring 

61
Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive. For finished flooring. 

62
Belt Conveyors
5 conveyors welded together, 6"-16" belts, 20' long, electric drive

63
Banding Machine
Includes skate rolls, 1/2" plastic banding

63a
4 packing carts
4x7 various lengths

64
Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts
Belt fasteners

65
Skids of Parts

66
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

67
Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

68
Landen Strapping Machine
Model TPS-2000, serial # 0000081, 3 phase, not in working order

69
Flexband Plastic Banding
1/2" wide, 9900' per roll, 19 rolls

70
Wooden Cabinets and All Parts
Lots of brand new parts including: sprockets, chain, bolts, nuts, bushings, fuses, etc.

71
48" Blower
75 HP electric motor

72
Landen Strapping Machine
Model TPS-2000, serial # 1705, 1/2" plastic banding, 3 phase

73
Perske Electric Motor
30 HP, 3450 RPM

74
Perske Electric Motor
25 HP, 3520 RPM

75
Ingersoll-Rand Air Compressor
Model 253, serial # 30T655908

76
Titan Industrial Heavy Duty Shop Press
50 ton capacity

77
30" Patton Fan

78
Wooden Cabinet and Contents
Grease, hydraulic motor, and miscellaneous parts

79
Wooden Cabinet and Contents
Cylinders, filters, bushings, bearings, etc.

80
Steel Rack and Contents
Electric motor, etc.

81
Yates American C50 Gang Saw
Serial # B-21766-R, 12" blades, 60 HP electric motor

82
Cart and Parts for Gang
Spacers, blades, etc., 12" blades, 3 1/2" arbor

83
Wooden Crate filled with Belts

84
Pallet of Bolts, Nuts, and Miscellaneous Parts

85
Braketron Motor Brake, Electric Motor

86
Weinig Profimat 22 N 5 Head Moulder
Model P22N, machine # 226-6988, 9" head, 1 1/2" arbor, 4 sided with dust tree

87
Belt Conveyor
13" x 19' x 48" high, 3" sides, 12" belt, electric drive

88
Ingersoll-Rand Air Compressor
Model # 2525, serial # 6035526, 7 1/2 HP electric motor, approx. 200 gallon vertical tank

89
All Dust Pipe on Inside of Building
4"-24" diameter

90
Skid of Belts
4"-49 1/2" wide, various lengths

91
48" Carolina Dust Blower
W/ 125 hp motor 

91a
*telemecanique Square D
Ali start 46. 

92
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame

93
36" Carolina Blower
30 HP electric motor

103C

94
48" Carolina Blower
No drive

95
Lincoln Electric Motor
100 HP, 1765 RPM, 405T frame

96
Mac bag house Dust Bin with Air Lock
17' diameter x approx. 40' tall, includes structure steel
includes bag blow out unit 

97
Cyclone on Top of Tall Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

98
Cyclone on Top of Short Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

99
Dust Cyclone
18' diameter x approx. 25' tall, includes structure steel to roof

100
All Dust Pipe on Outside of Building

101
1992 Industrial Wood Boiler
Model WWF-690-250, serial # RMP69001, heating surface 4045 sq. foot, includes all parts in boiler  shut down by.boiler company  water treatment steam valves. 

101A
*Silo Unloader
electric drive, in silo behind boiler

102
1972 Cleaver Brooks LP Boiler
Serial L-54637, model CB100-400, this boiler was in good working condition whey they shut down, includes all parts and accessories for boiler

102A
*Water Conditioner
Was used to treat water going to boiler, 80" x 80" x 100" tall

102B
*Well-X-Trol Pressure Tank
Model # WX-302, 24" x 49"

102C
*Inswool Ceramic Fiber Blanket
1" thick x 25' long, 7 boxes

103
Steam-Pak LP Boiler
Model SPH600-6-116678, serial # 682909H41548, not in working condition

103A
48" Dust Blower
75 HP electric motor

103B
DeWalt Radial Arm Saw

103C
*12" Powermatic Tablesaw
Model 72A, serial # 9572014, electric drive

103D
*Walker Turner Drill Press

104
Newman S-382 2 Sided Planer
Serial # 14510, 6" x 30" capacity, spiral cutter heads, 40 HP motor on bottom arbor, 75 HP on top arbor, includes hydraulic pack for feed rolls, 25' infeed, 11' outfeed

105
Mereen-Johnson 424DC Multi Gang Rip Saw
Model 424-DC, serial # MJ-4134, top arbor, 12" blades, electric drive, good condition

106
Lumberline Laser System
6 lasers, includes steel frame to floor

107
Electric Lift Table
4' x 8'

108
5 Strand Transfer Deck
12'6" x 15' x 34" high, H-78-B rooftop chain, does not include shaft that connects it to lot # 109, no drive

109
5 Strand Transfer Deck
11' x 46' x 34" high, electric drive

110
Adjustable Lumber Carts
50" x 7', extends to 11'

111
Adjustable Lumber Carts
50" x 7', extends to 11'

112
Adjustable Lumber Carts
50" x 7', extends to 11'

113
Adjustable Lumber Carts
50" x 7', extends to 11'

114
3 Strand Transfer Deck
12' x 16', electric drive, 1st lot of an entirety

114A
5 Strand Transfer Deck
12' x 10', electric drive

114B
Unscrambler and Transfer Deck After Unscrambler
16' wide, electric drive

114C
Entirety Lot # 114-114B
With 10% raise

115
Transfer Deck With 8’ Tilt Hoist
12' x 30', electric drive, 1st lot of an entirety
8' tilt hoist.  

116
15 HP Hydraulic Pack
Was used for lot # 115

117
Stick removal Conveyor belt
18" x 26', 11" belt, electric drive

118
5 Strand Transfer Deck
12' x 12'6", air popup stops, electric drive

119
Cornell Unscrambler
6' x 11', electric drive

120
Grating chain/Infeed for Trim Saw
10'6" x 30', even end rolls, electric drive

121
Cornell Trim Saw
24" blades, 2 blade, 16' capacity, waste conveyor, electric drive

122
6 Strand Transfer Deck
10'3" x 110' x 39" high, electric drive

122A
Entirety Lot 115-122
With 10% raise

122B
600 amp AB Motor Control Center
Allen-Bradley Centerline Motor Control Center.  600 amp with Allen Bradley motor control box with operator control over grating chain

122C
Parts for Cornell grate and trim line
81x repair chain links, 1st aid kits enclosed in locker cabinet

123
Ingersoll-Rand Air Compressor
Model 242, serial # 30T861092, 5 HP electric 3 phase motor, approx. 120 gallon vertical tank

124
Transfer Deck With Tilt Hoist
11'6" x 38', electric drive, 1st lot of an entirety

125
4 Strand Transfer Deck going to Drop Rolls
12' x 40', air popup stops

126
Waste Conveyor
14" x 23', 4 sides, 12" belt, electric drive

127
Waste Conveyor
19" x 18', 4" sides, 12" belt, on incline, electric drive

128
Drop Rolls to put Drying Sticks In
9' x 17', 8 1/2" x 6'5" rolls, raises up to 18', electric drive

129
Entirety Lot 124-128
With 10% raise

130
Lewco Skate Rolls
16" x 60'

131
Rack for Drying Sticks
7' x 8'

132
Cornell Roll Case
10' x 95', 8 1/2" x 9' rolls, 28" roll spacing, 2 1/2" shaft, missing 1 roll, the first 20' is live rolls, electric drive

140
CAT 920 Wheel Loader
Serial # 62K5626, hours are unavailable, includes 8' pin-on bucket, cab has A/C, CAT engine, runs and operates

141
CAT 950 Wheel Loader
Serial # 81J9507, meter reads 6926 hours, includes 86" pin-on grapple attachment, CAT engine, runs and operates

142
CAT V180B Forklift
Model V180B, serial # 68Y00956, meter reads 17,337 hours, 6' forks, 7' wide mast, 10'6" tall, CAT engine

143
Hyundai 70D-7E Forklift
PIN HHKHFZ11PD0002246, truck weight 25,527 lbs., 4' forks, mast 83" wide, 10'6" tall, hours unknown, NO MOTOR OR TRANSMISSION

144
20951 Road Grader
Serial # DV-230895, hours unknown, 12' blade, Cummins diesel engine, runs and operates

145
Cat V330B Forklift
Serial # 72Y01429, 33,000 lbs. lift, 13' mast height, Cat engine

146
1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120
Year: 1998
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: meter reads 26,713 miles
Plate:
Body Type: 2 Door Cab; Regular; Styleside
Trim Level: Standard; XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V6, 4.2L (256 CID); OHV
Fuel Type: Gasoline
Horsepower:
Transmission:
VIN #: 1FTZF1821WNB69120

Features and Notes: not currently in working condition

150
Westinghouse Electric Motor
7.5 HP, 3 PH, new in the crate

151
Westinghouse Electric Motor
5 HP, 3 PH, new in the crate

152
Electric Motors
50 HP, 20 HP, 25 HP, condition unknown

153
GE Electric Motor
75 HP, 3 PH, frame 405TS, loose

154
Schorch Electric Motor
150 HP, 3 PH, frame 445-2, loose

155
Electric Motor
150 HP, 3 PH, frame, 445-2, loose

156
Louis Allis Electric Motor
150 HP, 3 PH, frame 44TT, loose

157
Electric Motor
150 HP, 3 PH

159
40 HP Hydraulic Power Pack
Includes 3/4 HP electric pump, heat exchanger tank 22 1/2" x 71 1/2" x 31", good condition

160
Whirlwind Upcut Saw
Model 1000R, serial # S-3184602R, 12" blade, foot pedal

161
Pallet of No. 78 Chain

162
Gear Drive
With 5 HP electric drive, on steel frame

163
30 HP Hydraulic Power Pack
Serial # A-3275-A, 100 gallon tank

164
5 Barrels of Chain

165
2018 Baker Band Resaw
Model BBR-O"ABX", serial # 18-4878, 2" bands, 28" bandwheels, 40 HP electric drive, 11 1/2" belt, manual, excellent condition

165A
New Resaw Bands For Baker
Fits lot # 165, 14'2", 18 pieces in box, 2" wide

166
Electric Motor
15 HP, 30 HP

167
Armstrong Circle Saw Sharpener
Serial # 17400, 1 HP electric drive with control box. Manual

168
Vollmer Grinder
Fab No. 172, electric drive

169
Pallet of Blades
24" x 1 1/2" arbor

170
Electrical panel
Fused disconnect Starter

170A
American Scissor Lift
Model 2JA, serial # 4866-5, 4000 lbs. lift, foot pedal

171
20 HP Ploypac Hydraulic Power Pack
Serial # P87-351, 35 gallon, good condition

172
30 HP Hydraulic Power Pack
Cooling unit, tank 15" x 72" x 35" high, good condition

173
Gear Reduction Drive
13.6 HP, ratio 15.5

174
Pallet of Sprockets
8"-24"

175
Pallet of Electric Transformers

176
Pallet of H130 Chains

177
Pallet of H130 Chains

178
Large Box of Oil Filters
Big selection of sizes

179
Cabinet of Cat Parts

180
Washer Parts
22" x 35" x 35" high, on casters

181
Pallet of H130 Chains

182
Pallet of H138 Chains

183
Pallet of WHX124 Rex Chains

184
Pallet of Chains
Several types

185
5 HP Rucker Hydraulic Power Pack
Serial # 22331230A, 30 gallon

186
30 HP Ploypac Hydraulic Power Pack
No. P89-462, 90 gallons

187
Inovec Hydraulic Power Pack
Serial # A3275C, 2- 30 HP, 1- 2 HP electric drives, 150 gallons, good condition

188
Pallet of Rollers
8 3/4" x 36" rollers, with bearings, 5 pieces

189
Pallet of Rollers
8 3/4" x 30", with bearings, 5 pieces

190
Pallet of H-130 Chains

191
Pallet of Rex Log Deck Chains

192
Pallet of Grease Hose Reels
Good condition

193
Pallet of Electric Parts
Conduit, etc.

194
Pallet of FMP Storage Drawers
Brass fitting, bolts, etc., fully loaded

195
Container of Log Deck Parts

196
Container of Chains

197
Gear Reduction Drive
7.5 electric drive

198
Pallet of H130 Chains
2 skids

199
36 1/2" Pulley
8 groove, 6 1/2" hub, debarker chain

200
Transformer
Single phase, 25 KVA

201
40 HP Hydraulic Power Pack
Serial # 2536JOB7786, 24" x 59" x 26" high, heat exchanger

202
20 HP Mellott Hydraulic Pack
12 1/2" x 33" x 36", excellent condition

203
Container of AL1 Chains

204
Pallet of Miscellaneous
Reduction Gear Drive, line shaft with sprockets

205
Pallet of H130 Chain

206
Pallet of Log Trough Chain
12" wide

207
Gear Reduction Drives
7 pieces

208
Band-O-Matic Bander
DBI-8160, with 1/2" banding

209
Pallet of Miscellaneous
Electric motors, 10 HP, 14" saw blades, chains, etc.

210
Pallet of Chains
30 HP electric motor, chains are used for wooden conveyors

211
48" Box Fan
With electric drive

212
25 HP Electric Motor
3 PH, new in crate

213
Wall Vent
40" x 40", 2 pieces, new in crate

214
End Matching Chains
Used, miscellaneous parts

215
Pallet of Miscellaneous
Electric motors, gear boxes

216
Pallet of Rollers
6 3/4" x 48" rollers (6 pieces), 2 radiators

217
Pallet of Log Trough Chains

218
Square D Electrical Panel
With disconnect

219
Log Trough Chain
11 1/2" wide

220
Log Trough Chain
6" wide

222
Miscellaneous Box
Electric boxes, gear drive

223
40 HP Lincoln Electric Motor
3 PH, brand new

224
75 HP Electric Motor
3 PH, loose

225
50 HP Electric Motor
3 PH, new in crate

226
Pallet of Pulleys
Sprockets, gear drives

226A
20" Blower Fan
New in crate

227
20 HP Hydraulic Power Pack
With heat exchanger, 24" x 35" x 18"

228
Scissor Lift
Needs work

229
Barrel of Chains

230
Hydraulic Saddle Turner
Hydraulic drive, good drive

231
Hydraulic Saddle Turner
Hydraulic drive, good drive

232
Pallet of Chains
Gear drives, sprocket

233
Industrial Upcut Saw
Foot pedal, no blade, electric drive

234
Box of Miscellaneous
Chains, hydraulic hoses, control box

235
End Matching Chains
3 boxes

236
Pallet of Chains
Used for wooden conveyors

237
Pallet of Chains
Waste Conveyor

238
20 HP Hydraulic Power Pack
24" x 35 1/2" x 15" high tank

239
10 HP Hydraulic Power Pack
with heat exchanger, 20 1/2" x 34" x 19 1/2"

240
Box of Miscellaneous

241
National Vertical Air Tank
Serial # 12511

242
Box Miscellaneous
Cutter heads, chains, dynamitic control box

243
Paddle Waste Conveyor Chains

244
2 Pallets of Waste Conveyor Chains

245
Saddle Turner
Hydraulic drive, good condition

246
Barrel of Chains
3 barrels

247
Barrel of Chains

248
Barrel of Chains

249
Pallet of Chain Sprockets
Also has gear reductions

250
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

251
Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

252
Yates E1 End Matching Machine
4 HP electric drive

253
Yates End Matching Machine
B-23800, 4 HP electric drive

254
Yates-American Flooring A23 Side Matcher
Model A23, serial # B-25902, 4 head, with electric panel

255
Lumber Rack
8 3/4" x 87 1/2" rollers, vertical air tank, live roll case 18" x 8', hydraulic drive

256
Yates-American Flooring A23 Sidematcher
Model A23, serial # 22990

257
Mattison Straight-line Rip Saw
Model 202, serial # 14141, table 65 1/2" x 77 1/2"

258
36" Blower
No drive, outlet 22" x 24", inlet 21"

259
36" Blower Fan
29" x 48" box with miscellaneous parts, seals, sprockets, etc.

260
52" Blower Fan
Hub 2 3/4", good condition

261
52" Blower Fan
Hub 2 3/4", good condition

262
52" Blower Fan
Hub 2 3/4", good condition

263
46" Blower Fan
Hub 2 3/4", 20" wide, good condition

264
34 1/2" Blower Fan
Hub 2 1/2", 14 3/4" wide, good condition

265
58" Precision Chipper
Serial # C.3732, 6 knife, very good condition

266
58" Precision Chipper
Serial # 3769, 6 knife, very good condition

267
Carriage Drum Drive
Sits on steel frame 51" x 102", gear is in good condition, motor has fire damage

268
Yates-American G-55 Planer
serial # B-29894, electric/hydraulic, electric drive

269
24" Cutoff Saw
Electric drive, hydraulic controls, 42" x 445" x 67" high

270
Electric Motor
125 HP, 3 PH, loose

271
250 HP Electric Motor
Frame 447TZ, 3 PH, good condition

271A
250 HP Electric Motor
Frame 447TZ, 3 PH, not electrically sound

272
Yates-American G-50 Planer
Serial # 24399, 50 HP drive

273
Williams Crusher and Pulverizer
Serial # 15456, 75 HP electric drive, top feed, bottom discharge

274
Scanning System

275
Waste Conveyor Chain

276
Unscrambler Chain

277
Filbert Stowell Band Head Rig
31" x 9' off bearing belt, hydraulic strain, 7' bandwheels, 13" wide, 1" meat

279
Oliver Straitoplane
Machine No. 170, serial # 96387, 36", electric drive

281
Pallet of Miscellaneous Parts
Pulleys 5 1/2"-19 1/2"

282
Pallet of Miscellaneous Parts
Electric motors, Ingersoll-Rand air compressor, gear box

283
Chipper Knives
Variety of sizes

284
Pallet of Rollers
8 1/2" x 49 3/4" rollers with bearings, 6 pieces

285
Pallet of Shafts
59" long

286
Jackson Cochrane Planer
No. 30, electric drive

287
Electric Panels

288
Benshaw Chipper Braking Starter
36" x 48"

289
Electrical Panel
48" x 72"

308d
Kiln components
Kiln 11, 12, 13, 14 with dell computer. Brother printer Variable feed drive

290
Paulson Horizontal Band Mill Diesel Engine
Fully hydraulic, 36" band wheels, ISUZU diesel engine, 4" band, 36" x 24' deck, log turner, extra bands, meter shows 1559 hours

291
Pallet of Storage Containers
Loaded with bolts, etc.

292
Mattison Straight-line Rip Saw
No blade, electric drive, 65" x 77 1/2" table

293
Tool Chest
13 drawer, 20" x 40"

294
Pallet of Filters
Oil and air

295
Pallet of Chains
Various sizes

296
Pallet of Gear Drives

297
1 1/4" Metal Banding
5 rolls

298
Pallet of Belts
New and used

299
Ridgid 300 Pipe Threader

300
Hoses and Sprockets
Air, hydraulic hoses

301
Pallet of 12" Sprockets

302
Pallet of Paddle Chains

303
Pallet of Hydraulic Cylinders

304
Pallet of Miscellaneous
Electric motors, gear drives

305
Manual Scissor Lift

306
Pallet of Miscellaneous Parts
Seals, wire looms, bearings

307
Pallet of Miscellaneous
Milwaukee bench grinder, air impact, hand fuel pump

308
Grease Hose Reels

308f
Siemens 400 amp main
In kiln 11-14 kiln office includes GE 75 KVA transformer

308g
Kilns 5;6;7. Controls and components
three Lignomat. VFD cabinets. PLLC cabinets stripped. 
includes doors fans and all interior kiln components

308h
Track kiln components

309
Pallet of Rollers
8 1/2", 24"-42"

309A
Truck Tire Dolly

309B
PVC Fittings and Radiator

309C
Spinks Scale

309D
Liftrite Pallet Jack
5500 lb. lift, works

310
Wisconsin Gas Engine
Model VH40, serial # 5246516

310d
Oahu’s pro scout scales
With calibration weights

310e
kiln trek kiln components
Main for kiln controls For 11,12,13 and 14. No controls 
includes kiln components. Pipes doors fans vents.  
includes dell computer and brother printer only 

311
15 HP Hydraulic Power Pack
30" x 60" x 18" high

312
Riding Tennant Sweeper
Model 6500, serial # 6500-6821, GVW 5200, LP gas engine, meter shows 935 hours, condition unknown

313
ACME 1/2" Plastic Black Banding
3600 ft. per box, 28 boxes

314
ACME 1/2" Plastic Black Banding
3600 ft. per box, 18 boxes

315
Gempaint
End paint for dried lumber, heaters, pump included, 4 full barrels, 5 empty

316
Carriage Parts

317
3 Fans on Stands
30" and 32"

325
3 Used Tires
2- 20.5-25, 1- 15.5-25

328
ASM Unscrambler
10' x 17'6" x 6'4" tall, hydraulic drive 8 strands of welded bar chain

329
Debarker
No tag or any info on it, 12' infeed

330
Rack for Drying Sticks
7' x 8'

330A
Rack for Drying Sticks
7' x 8'

330B
Rack for Drying Sticks
7' x 8'

331
Rack for Drying Sticks
4' x 7'

331A
Rack for Drying Sticks
4' x 7'

331B
Rack for Drying Sticks
4' x 7'

331C
Rack for Drying Sticks
4' x 7'

331D
Rack for Drying Sticks
4' x 7'

331E
Rack for Drying Sticks
4' x 7'

331F
Rack for Drying Sticks
4' x 7'

331G
Rack for Drying Sticks
4' x 7'

331H
Rack for Drying Sticks
4' x 7'

331I
Rack for Drying Sticks
4' x 7'

331J
Rack for Drying Sticks
4' x 7'

331K
Rack for Drying Sticks
4' x 7'

331L
Rack for Drying Sticks
4' x 7'

331M
Rack for Drying Sticks
4' x 7'

332
Custom Built 4 HB Carriage
30" x 16' carriage

333
Operator's Cab
4' x 6' x 80" tall, Corley controls, needs glass replaced

334
Carriage Track
45" center to center x 48'

334A
Tyrone-Berry Feed and Drive
Model SMA-215, serial # A2186, DA-L/M4005. Pump and drum package 

334B
Entirety Lot # 332-334A
With 10% raise

335
Angled Spiral Rollcase and Transfer Deck
68" x 13', transfer going to rolls is 10', electric drive. First of the entirety of the TS manufacturing package maker

336
Spiral Roll Case
48" x 15' x 36" high, 9" x 36" rolls, 1 7/8" shaft, 27" roll spacing, every roll has a hydraulic motor. Not part ,Of the entirety 

337
T S Mfg package breakdown hoist
12'6" wide.  Part
of entirety. 337;338;339;335;339;340

338
3 Strand Transfer Deck
6' x 11' x 32" high, frame only, electric drive part of the TS Manufacturing 
stacking system. 335,337,338,338a,339,340

339
Breakdown hoist
11'6" x 13'6". With package deck

339a
Package maker stacker lay up table. Part of an entirety. 337;335;339 336:338;340

340
Transfer Deck
8' wide, 2 sections approx. 24' long

340a
T and S Manufacturing stacking components complete. 4’
Includes. 335,337,338,339,340,338a.  T and S stacker package maker. Ready to load seller or TAS have drawings.  
job number. 16994, entirety with 10% raise

340b
Hemco Lumber Sorter Series 43 Dismantled and ready to load
24 23 sorts 1 reject  Bay 16'  sorter disassembled and ready to load
standard Series 43 Sling Sorter Last Install Job 2745
Controls are available for this traditional sling sorter from USNR  
Situated at the Bradford Pa site
444 High Street Bradford PA  

341
5 Strand Transfer Deck
7' x 13' x 35" high, hydraulic drive, needs shaft on one end

342
Mellott Vibrating Conveyor
25" x 60' x 19" high, 19" pan, 4" sides, electric drive

343
Webster Vibrating Conveyor
33" x 12' x 23" high, 24" pan, 6" sides, electric drive

344
Balderson Bucket
21" center to center of quick attach, 2 1/8" mounting hole, 9' wide, for Cat loader

345
Balderson Bucket
23" center to center of quick attach, 2" mounting holes, 128" wide, for Cat loader

346
Loader Bucket
28" center to center of quick attach, 1 1/2" mounting hole, 103" wide, for Cat loader

346A
Loader Forks
28" center to center of quick attach, 1 1/2" mounting hole, 46" forks, for Cat loader

347
Roll Case
10' x 15' x 38" high, 8 1/2" x 108" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

348
Dead Rolls
16" x 20', 4" x 12" rolls, 12" roll spacing, 1 1/4" shaft

349
Spiral Roll Case
56" x 18' x 46" high, 9" x 42" rolls, 22" roll spacing, 2 3/8" shaft, needs bearings replaced, no drive

350
Roll Case
41" x 18' x 33" high, 8 1/2" x 30" rolls, 30" roll spacing, 2" shaft, has shaft to mount transfer deck

351
Hanchett knife Sharpener
Size 38", type DN, shop # 8063

352
Power Transmission
5 HP electric motor

353
Overhead Hoist System
7' x 11' x 12' tall, 2 ton hoist

354
Mereen-Johnson Gangsaw
Model 424-DC, serial # MJ5173, for parts or to rebuild

355
Steel Rack and Shafts with Sprockets
2"-4" shafts, various lengths

356
Coils for Dry Kilns

356A
*4 Strand Log Deck
10' 4" x 17', rebuilt with new chain, new bearings, electric drive

357
Adjustable Lumber Cart
42" x 98"

358
Adjustable Lumber Cart
42" x 98"

359
Adjustable Lumber Cart
42" x 98"

360
Adjustable Lumber Cart
42" x 98"

361
Adjustable Lumber Cart
42" x 98"

362
Adjustable Lumber Cart
42" x 98"

363
Adjustable Lumber Cart
42" x 98"

364
Adjustable Lumber Cart
42" x 98"

365
Adjustable Lumber Cart
42" x 98"

366
Adjustable Lumber Cart
42" x 98"

367
Lumber Cart
42" x 84"

368
Lumber Cart
42" x 84"

369
Lumber Cart
42" x 84"

370
Adjustable Lumber Cart
42" x 98"

371
Lumber Cart
42" x 84"

372
Lumber Cart
42" x 84"

373
Adjustable Lumber Cart
42" x 98"

374
Rack for Drying Sticks
4' x 7'

375
Adjustable Lumber Cart
42" x 98"

375A
*Chain Conveyor
18" x 30' x 28" high, electric motor

376
Adjustable Lumber Cart
42" x 98"

378
Adjustable Lumber Cart
42" x 98"

379
Adjustable Lumber Cart
42" x 98"

380
Adjustable Lumber Cart
42" x 98"

381
Lumber Cart
41" x 96", includes 4 x 4's

382
Lumber Cart
42" x 84"

404
Vecoplan Electric Panel
30" x 36" x 12" deep

383
Lumber Cart
42" x 84"

384
Adjustable Lumber Cart
42" x 98"

384A
Heat Ducts, Louvers Etc.

385
Electric Motor and Roller
Weg motor, 15 hp, 3520 RPM, 16" x 16" roller, Newco 150 steel WCB 77, 4" long 2 1/2" steel bar

386
Ductwork for Electrical Wiring
6" x 6" ducts, 30' of ducts

386A
Rack for Drying Sticks
7' x 8'

387
ACME Saw Sharpener
Bench model saw sharpener

388
H 78B Rooftop Chain
for transfer deck

408
Yaskawa V1000 Electrical Switches
27 total V1000 switches, 3- WAGO 787-880 electrical switches, 2- WAGO 787-742 electrical switches, 1- WAGO 787-740 electrical switch

389
Electric Motor and Steel Bars
SEW-Eurodrive Inc. electric motor, 5 HP, 1680 RPM, 49 1/2" steel bars, 20 total, 4 arched steel pieces

390
Electric Motors
Marathon electric motor- 5 HP, 1740 RPM, 184T frame, Hernco electric motor- 1 HP, 1725 RPM, 143T frame, US Electrical electric motor- 5 HP, 1440 RPM, 184T frame

391
Century Electric Motor
Baldor electric motor- 7 HP, 1140 RPM, 215C frame, A.C. electric motor- 15 HP, 1750 RPM, 254TC frame, Thermoid 8-004-104, 9" plates, 20 total

392
Blade for Blower
2" blade

393
Pipe and Sand Paper
7" duct pipe, 3' long, 7 drainpipe elbows, 2- 36" rolls of sand paper

394
Pipe and Sandpaper

395
Mac Bags for bag house
14 boxes

396
Exhaust Fan Blades
4' blades, 1 1/2" axis, 4 replacement blades total

420
Assorted Electrical Switches
Yaskawa V1000 switches, Wago 787-881, Wago 787-742, etc.

397
Worm Gear Winch with Mounting Blocks
Model 664-SLRFX, Tulsa Worm Gear Winch

398
Square Duct Frames and Storage Containers
3- 39" x 39" x 5" deep, 4- 45 1/2" x 37" x 3 1/2" deep, 7 duct frames total, 1- 32" x 40" x 10" deep container, 1- 46" x 45" x 14" deep container

399
AJAX Auto Transformer Starter
Part # RH-49831-1, 125/150 HP, 440 Volts, mounted in 28" x 32" x 12" deep box

400
Gate Valves
1- 2" axis, 2- 2 1/2" axis, 1- 3" axis, 1- 3 1/2" axis, 5 valves total

401
Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame, appears to be brand new

402
Bosch Hydraulic Oil Pumps
Smaller pump serial # 090-62111-04330, part # 0513300202, larger pump's pump # 6513870216

403
Electric Motors and Metal Straps
Westinghouse Life-Line electric motor serial # 7909, 10 HP, 1650 RPM, 215T frame, Delco electric motor serial # 068, 5 HP, 1465 RPM, 215T frame

405
Gear Wheels, Clamps, Oil Dry Powder
4- 12" gear wheels, 13- 4" clamps, 5 bags of oil dry powder

406
Ingersoll-Rand Air Compressor 30T
Model 2475N5, serial #C807072

407
Uline Bander Cart
21" x 24" x 38" high

409
Grizzly Dust Collector
Electrical drive, mounted on portable platform

410
Electric Motors Band Saw
Shop Craft band saw, 10" blade, electric, 3 electric motors, assorted electrical parts

411
Ingersoll-Rand Industrial Air Compressor
Model 2425N, serial # 696220, 30T, vertical tank

412
QL Kiln
Model 40GL, lab oven, electric motor, 16" x 20" x 32" tall

413
Powermatic Band Saw
Model 043, serial # 92430433, 3/4 HP electric motor

414
Ingersoll-Rand Air Compressor
Model 242, serial # 720294, 5 HP motor, 30T, horizontal tank

415
Craftsman Tool Chest and Kiln
18" x 27" x 48" tall, loaded with tools, 11" belt for conveyor, small lab oven 16" x 20" x 31" tall

416
Electric Motors, Extension Cords, etc.
6 electric motors, air hose, 22" bart chain for chain saw, caulk gun

417
Saw Blades and Assorted Saw Mill Parts
2- 12" circle saw blades, steel blades, scale chop saw dust catcher, etc.

418
Grinding Wheels
4"-12" wheel, other miscellaneous parts

419
Assorted Steel Parts
Old steel bars, wheels, plates, etc.

421
Assorted Tools
Wrenches, pipe wrenches, air tools and parts, etc.

422
Grinders

423
Dependable Machine Company Inc. Knife Sharpener
Model 152-A, serial # A2532

424
Rondamat 934 Knife Sharpener
Model R-934, machine # 934-426

425
Sutton Knife Sharpener
Serial # 268

426
Wheel Loader Forks
48" forks, fit Cat wheel loader, pin-in style

427
*Ingersoll Rand Air Compressor
5 HP electric motor, 100 gal. tank

428
*Bearings and Misc. Parts

429
*Parts for Conveyors

430
*Steel Banding
3/4" x .023, 10 rolls

431
*Dust Blower
Size 60-6,

432
*Fins for Dry Kilns
Approx. 35 pcs. 18' long, brand new

434
*Wax Tank with Honda Engine

435
*Titan Industrial Hoist
5' high

450
Shelf Loaded with Steel Pipe Fittings
Elbows, adapter, connectors, faucet handles, unions, nipples, hangers, etc.

451
Shelf Loaded with Steel Pipe Fittings
Nipples, unions, elbows, T's, adapter, etc.

452
Metal Shelving with Tools
2' x 3' x 8' high shelf, pvc pipe fittings, 24" circle saw blade in good condition, miscellaneous fasteners, fittings, auto parts, wax pump and sprayer

453
Ingersoll-Rand Air Compressor
Model 216, serial # 6972835, 2 HP electric motor

454
Tool Bench Organizer Loaded with Parts
Assorted nuts, bolts, screws, pulleys, washers, grinder wheels, etc.

455
Cole Tool Bench Vise Grip

456
Columbian Bench Vise Grip

457
File Cabinets
2 white cabinets, 14" x 25" x 29" high, filled with miscellaneous shop/office items, gray cabinet 26" x 14" x 51" high, filled with miscellaneous items

458
Large Shelf Loaded with Miscellaneous Shop Items
Plumbing, electrical, auto parts, etc.

459
Shelf Loaded with Miscellaneous Items
Lots of welding rods, box of lumber crayons, , hand tools, fittings, etc.

460
Shelf Loaded with Miscellaneous Items
Wire, conduit fittings, electrical panels and switches, sandpaper, spray paint, etc.

461
Large Rack with Lots of Steel
Steel pipes, rods, etc.

462
Metal-Cutting Band Saw
1 HP electric motor

463
Set of Steel Saw Horses
25" x 54" x 29" tall

464
Torch Set
19" x 10" rack for tanks, 26" x 36" overall

465
John Deere Riding Lawn Mower
PIN MOL133A102932, 42" deck, 13 hp motor, condition unknown

466
Toro Snow Blower
Serial # 9001031, 32" blade, condition unknown

467
DeWalt Air Compressor
1.6 HP electric motor, 15 gallon tank, 200 PSI max

468
Campbell Hausfield Air Compressor
20 gallon tank, 150 max PSI, electric motor

469
Wilson Welder
Not in working condition

470
Shelf with Miscellaneous Parts
Auto parts, bolts, pins, washers, nuts, chain, etc.

471
Craftsman Tool Chest Loaded with Tools
Nuts, bolts, assorted fasteners and hard rods

472
Parker Hydraulic Hose Crimping Machine
Includes bench mounted vise grip, organizer full of hydraulic fittings, 1.5 HP electric motor

473
Steel Fittings and Heating Bulbs
Assorted steel pipe fittings, 25W LED heating bulbs, etc.

474
Propane Tank Clamps, etc.
15 lbs. propane tank, 1 gallon gas jug, chain hooks, assorted clamps, etc.

475
Electric Motors and Hoist
Century electric motor 3 HP, 1735 RPM, Baldor electric motor 7.5 HP, 3450 RPM, U.S. electric motor 7.5 HP, Budgit 2 ton electric hoist

476
Assorted Belts
Assorted sizes

477
Hydraulic Hoses
3/4" hoses

478
Scrap Steel
Steel bars, plates, pipes, etc.

479
Handy-Man Jack

480
Floor Jack
Walker heavy duty floor jack

481
Electric Motor and Scrap Steel
Marathon electric motor, 7.5 HP, 3450 RPM, 184JMV frame

482
Handtools and Auto Parts
Large assortment of wrenches and other hand tools, brand new set of shocks, air filter, carburetor, etc.

483
Assorted Shop Tools
20 ton hydraulic jack, band saw blades, 4 gallon backpack style sprayer, skill saw, air nailer, etc.

484
Famco 25R Manual Press

485
Powermatic Drill Press
Model 1150A, serial # 94155168, 7.5 HP electric motor

486
Sprockets and Bearings
All items in room