Showcase Equipment Consignment Auction – Sawmill and Forestry Equipment
Listing ID#: 446639

Sale Location

Middlebury, IN 46540
Sale Dates and TimesSALE IS COMPLETED
Thursday Nov 11, 2021 Completed
Friday Nov 12, 2021 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions


These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

 

  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Auction Conducted in the State of Indiana.

 


    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.


 

  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.



The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.



X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

 

  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

 

  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

 


    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.


 


    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.


 


    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.


 


    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.


 


    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.


 


    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.


 


    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.


 


    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.


 


    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,


(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 

    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.


 


    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.


 


    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.


 


    1. Online Bids. Online bids may not be reduced or retracted.


 

  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

 

  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

 

  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

 

  1.  

 

  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

 

  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

 

  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

 

  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

 

  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

 

  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.


  1.  

Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

 

  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the



vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

 

  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

 

  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

 

  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

 

  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

 

  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

 

  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

 

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

 

  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.









 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

 

  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

 

  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

 

  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

 

  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

 

  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

 

  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Listing Information
Consignments Wanted including but not limited to: Sawmill, Pallet Shop, Industrial Woodworking, Metalworking, Skidders, Loaders, Dozers, Lifts, Forklifts, Skid Loaders, Tractors, Etc.
Absolute! No Minimums, No Reserves!

Booth space available for Vendors!

Call or email Darrin at 574.536.1646 (db@showcaseequipment.us) for booths or to consign.

Sales tax is charge unless valid exemption is filed.

00
Information lot *
This auction will begin at 9 AM. We will sell in catalog order. A 7% sales tax will be charged on all purchases unless you have a valid exemption. All equipment is ready to load. Free loadout will be available the day of the auction and the 2 weeks following the auction. After 2 weeks, loadout will be by appointment and for a fee. For loadout questions call 260.585.2388.

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

099
1/25 Scale Wood-Mizer LT40 Portable
Super hydraulic sawmill. Die Cast. Head moves up and down and along track. Cute little model!

099A
1/32 Scale Tigercat 234B Knuckleboom
Model, Die-Cast Knuckleboom Loader

100
Construction Machinery Table Saw
Model: K. SN: 7429. 3 phase 5 HP electric motor. 16" Blade.

101
Industrial Radial Saw
Model: 02319 CRAFTSMAN. SN: 81460081. 208-240/480 Volts. 12" blade.

102
Monarch Uni-Point Saw
SN: 48 483. 220/440 Volts. 5 HP motor. 14" Blade.

103
Morgan Band Scragg Mill
2 stationary heads @ 3 1/2". 6" to 14" log capacity. 11' infeed chain. 1 1/4" bands. Hydraulic feed. Line shaft ready. Went through and reinforced in some areas. Good working condition. The reason I am selling is I have too many big logs for this machine.

104
Morbark Double End Trim Saw
Trim saw for a post peeling operation.

105
Log Trough
22" wide x 20' long. 6 1/2" wide chain. Hydraulic drive. Very good condition.

106
Stenner Single Head Resaw
Model: MH59. 12" x12" capacity. 36" band wheels. 4" band. No drive. Includes infeed and outfeed.

107
Stringer Reclaim Saw
5 1/2" capacity. Was used to reclaim stringers. Electric drive. Good condition.

108
Sullair Screw Compressor
Model 20-150L. 150 HP electric motor. Good condition.

109
International UV549 Natural Gas Genset
750 hours. Onan Generator. 3 phase. 220 Volts. 75 KW.

110
Scragg Mill
4" or 6" cants. No power

111
Miner Edger
6" capacity, needs blades and parts for movable blade.

112
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112A
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112B
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

114
Cornell Slab Saw
Model: SHL. SN: 387-177. 31" blade. Electric drive. 10' Belt conveyor included but no belt.

115
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center.  Powered rollers. BRAND NEW!! Never installed.

115A
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115B
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115C
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed. SOME BEARINGS ARE BROKEN LOOSE FROM THE FRAME.

116
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116A
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116B
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

117
Scissor Lift Lift Table
70" x 94" table. 30,000 lbs capacity. Electric powered. Good condition.

118
Robinson Vertical Resaw
3" upright band head. 36" band wheels. No power. Bare machine.

119
Timesavers 3 Head Sander
1988. Model 852-5CB. SN: 19340. 52" wide capacity. 25 HP electric motors on heads. Complete and ready to be installed.

120
Prescott Band Headrig
6'. Weight strain. Runs 12" blades.

120A
Weg 200 HP Electric Motor
890 RPM's. 460V. 3 Phase.

121
Filer and Stowell Band Head Rig
7'

121A
Teco 200 HP Electric Motor
890 RPM's. 3 Phase. 480 Volts.

122
Fulghum 60" Chipper
6 knife. Top discharge. 75 HP electric motor. Working condition.

123
Morbark Hour Glass Rollcase
40'. Electric drive. Hyd powered kickers. Good condition.

124
Corley Gang Edger
6" gang edger combo. Laser. 2 movable blades with hydraulics. Electric drive. All controls.

125
Unscrambler
4 strand. Hydraulic drive. 8' wide x 30" long

126
Salem Log Trough
30' long. Electric drive. 120 ladder back chain. Heavy duty built and in excellent condition.

127
Progress Unscrambler
3 strand. 10' wide. Electric drive. Very good condition. Overall dimensions 11' 9" wide x 8' 10" high.

129
Tilt Hoist *
SN: 285. Electric drive. Includes hydraulic unit.

128
Crosby Trim Saw
Model: 6225 iv. Size 4 8 saw. With 3 phase electric motor. Very easy to switch to line shaft. Very good condition.

130
Waste Conveyor
18" x 53' long. Electric drive. Ladder back chain. Good condition.

131
Trim Saw
8 saw. Drop blade grade trim saw. Will pass an 18' board. Electric drive, 6" thick capacity. Good working condition.

132
Belt Conveyor
54" wide x 45' long. Like new cleated belting. Electric gear box drive. Enclosed belt return. Good condition.

133
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition.

134
Mellott Transfer Deck
4 strand. 11' 6'' wide x 10' long. With stops. Electric drive. Good condition.

135
Log Trough
15' long. Dual H-78 chains. Gear reduction drive.

136
Green Chain
4 strand. 12' x 70'. Heavy duty built. Electric drive. Good condition.

137
Green Chain
4 Strand. 149' long. Like new H-78 chain. 3 phase electric motor and gear box drive.

138
Green Chain
3 strand. 21' long. 2 strand rooftop, 1 strand H-78 chain. Electric drive. Very good condition.

139
Waukesha Power Unit
SN: 360536. Model: VRG232U. Spec: G-41138. With Twin Disc clutch.

140
Dewalt Radial Arm Saw
Model: 35020. 20" Blade. Electric drive.

141
Lift Table
4' x 6'. Electric lift.

142
Hercules Industries Man Cage
36" square. Model: KI-161. SN: 62311. 500 pound capacity.

143
4 Arm Kickers
149" center of bearings.

144
Roll case
16" x 57" dead rolls. 36" high. 2" rolls.

145
GoFast Deduster
All hydraulic. Needs work.

146
Profile Cutter
Setup to cut profiles with dadoes on ends.

147
Roll Case With Fork Slots
16" x 111" per section or roll case. Center section is live. 90" x 111" overall.

148
Single End Trim Saw
Electric drive.

149
Custom Built Wide Cut Slab Mill
Similar to  TruCut. 2" bands. 60" capacity. Fully hydraulic. Hyd band tensioner and guides. Self contained. 70 HP John Deere diesel. 1424 hours on engine and approx 600 hours on the mill.

150
Cat 250 KW Genset

Cat 3306B diesel SN: 85Z04348. 23,710 hours. Was rebuilt at 12,000 hours. Generator is a 3 phase 480V. Great running unit.


151
2013 Wood-Mizer LT70 Portable Sawmill
30 HP 460V Electric motor. 5898 hours. Distributed control system. Debarker. Log loader. Cant flipper. Log turner. Loaded. 10 new bands. Trailer package included but not installed. VIN: 456D72419DNBB5906.

152
Montgomery Blo Hog
26". Top feed. Some new anvils. New gate. Blower has little wear but still in excellent condition. Comes with a hopper.

153
Sawdust Cyclone
2 intakes, 12 x 22 and 10 x 22. 24 in. round collar on one. 12" round outlet. 12' long x 4' diameter overall.

154
Phelps 24" Blower
No. 25-K. 12" round inlet. 9" outlet. Line shaft ready.

155
Meadows #1 Portable Circle Mill
3 HB carriage with 2 dogs. No wheels on axles. All manual. 50" blade with inserted carbide teeth. Lot # 155C ran this mill.

155A
50" Blade
With inserted carbide teeth.

155B
50" Blade
With inserted carbide teeth.

155C
Cummins 4 Cyl Power Unit
110 HP.  1833 hours. Mfg date 5/28/14. SN: 60130539. PEC Mfg. clutch. Model: C01113AZ. SN: SH11003. Muffler included. Murphy controls. Runs excellent. This unit was used on Lot# 155.

155D
Lincoln 75 HP Electric Motor
230/460 volts. 1775 RPMs. 365T frame. 3 phase. SN: 2735408. Was on Lot# 155. As is.

156
Roll case with Fork Pockets
5" x 82" rolls. 75" x 91" overall. Good condition.

156A
Roll case
5" x 82" rolls. 75" x 91" overall. Electric drive.

157
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

157A
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

158
SCMI 36" Sander
Sandya Uno. Model: Uno CS. SN: AE009339. Electric. 230/460 Volts. Feed belt still in good condition.

159
36" Sander
New drive roller in 1997. Feed belt is worn a little. Air drive. Electric drive on feed belt.

160
2 Pulleys
20 1/2" 8-groove pulley with a 4 7/16" collar. 8 1/2" 4-groove pulley with a 2 1/4" collar.

161
Cummins Power Unit
300 HP. Model: NTC335. 8414 hours. SN: 10318132. CPL 174. Twin disc clutch. Model: SP214P1 SN: 141268. New guts in clutch. Fires right up. Good condition.

162
Log Deck
2 strand. 7' x 23'. H78 chain. Speed reduction gear drive. Excellent condition.

163
Cat D333A Power Unit
6 cyl. 165 HP. SN: 87B572. 5290 hours. Cat Twin Disc clutch spec: 30365. Hasn't been started for 2 years. Was working good when taken out of production.

164
3 Sections Dead Rolls
(1) 23" x 113". (1) 23" x 73". (1) 18" x 112".

165
Frick Portable Circle Mill
2 HB carriage. Pipers Saw Shop headblocks. Manual. Air dogs. Hydraulic on newer mandrill and carriage drive. 52" inserted tooth blade. 5 groove pulley. 24.6-1 air motor. 33.8T01 air motor. 2 extra carriage wheels. Brand new hydraulic valve bank.

166
Iron Bull Self Dumping Hopper
10' x 66". 7000 lb capacity.

167
Cornell 6x36 Edger
SN: HE289672. 2 moveable blades. 10' infeed. 25 HP Electric motor. Could easily be switched to line shaft. 110V Lumberline lasers with Meadows measurement dial. 10 extra blades sharpened and ready to go. Very good condition.

168
Belt Conveyor
30" x 15'. Electric drive. Very good condition.

169
Edmiston 4 Blade Edger
SN: HE372E16. Mfg Date: 10/03/03. 4" x 36" capacity. 2 moveable (1 is warped) and 2 stationary inserted tooth blades. Hydraulic drive. Very good condition. 169A was used to run it.

169A
Cummins 4 Cyl Power Unit
110 HP. 2900 hours. Mfg date 4/21/04. SN: 30674268. WPT clutch with ball bearing kit installed recently. SN: W13057806010. Model: WTD-11-130. Runs excellent.

170
international A175 Power Unit
175 HP. 1996. With a clutch. Anti-Freeze line is broke when loading but ran before it broke. Starts very easily.

171
2021 EZ Boardwalk M40 Portable Sawmill
Upgraded IGX 700 Honda engine. 40" diameter x 16' 6" log capacity. 34" slab width. Only 11 hours!! Demo unit.

172
Jones Saw Grinder
Model 7A. SN: 75052A. Very good condition.

173
Roll Case with Popup Cross Transfer
25" x 15' roll case with a 4 strand 8' x 8' air powered popup transfer.

174
Newman 40 HP Electric Motor
3 phase. 1800 RPMs. 208/220/440 volts. As is.

175
Dead rolls
2 1/2" x 16" x 12' dead rolls

176
Phelps 40" Dust Blower
Model: 45HV-1. SN: 22997. 1900 max RPM. Good condition.

177
All the dust piping in pictures
(1) 14" x 23'5". (1) 14" x 39'2". (1) 14" x 7'4". (1) 14" x 32'. (2) 12" x 39'2". Comes with all the elbows, etc. as pictured.

178
Cooks Cat Claw Sharpener
Line shaft ready. Suffolk dual tooth setter.

179
Rotobek Grapple
Continuous rotation. Model: 4552HD-A-BF3-CB6-1. SN: 70003499R0-739602.

180
Worldwide 25 HP Electric Motor
1770 RPMs. 230/460 volt. 284T frame.

181
250 Gallon Fuel Tank
Still has some fuel. Has a hole 16" from the bottom.

182
Kohler 449 KW Genset
New Intelilite MRS19 control system 565 hours ago. New cam shaft. Approx. 10,000 - 11,000 hours. Model: D40012.1A65. New fuel filters. Starts right up and works excellent. Good clean machine.

184
John Deere 47 KW Genset
Model: 4039DF001. Serial: T04039D401471. Unknown hours. Exciter part is bad in generator. Diesel starts right up and run good.

185
Kohler Power System Enclosure
86" x 176". Sound attenuated. Was used with Lot # 182.

186
Steel Steps
25" wide x 44" high.

187
4 Strand Log Deck
Has C55D rooftop chain. Electric drive with Iron Man gear box. 11' wide x 12' long. Excellent condition.

188
43" x 11' Cyclone
11" round inlet. 10" outlet.

189
48" x 9'6" Cyclone
10" and 12" inlets. 11" outlet with airlock.

190
30" x 7' Cyclone
10" and 11" inlets. 10" outlet.

191
30" x 41" x 9'7" Belt Conveyor
Convey Ability. 110V electric motor with gear reduction drive.

192
50" x 7' Lumber Cart
With all swivel casters.

193
Various belting and conveyor parts

194
Cat Walk with Steps

195
Swinging All Manual Chopsaw
Electric drive. 18" blade. 4 stops. 15' infeed. 8' outfeed. Just out of production.

196
Precision 66" Chipper
Model: 66.18. SN: C.2944. 6 Knife. Just out of production.

197
Baker Edger
Model: BE-O. SN: 07-303. 20 HP electric motor per blade. Split arbor. Inserted tooth blades. Hydraulic infeed and outfeed. Just out of production.

197A
15 HP Hydraulic Unit
Barker Products. Model: BP-15-60-PUR1520B15. SN: 91.99.

198
York Furnace and Air Conditioner

199
Steam Valves

200
Frick Husk
No blade. Hydraulic drive.

201
Mellott Belt Conveyor
24" x 74'. No drive.

202
13' Barnsweep
The bottom has holes.

203
Chip Master 48" Chipper
6 knife. Very good condition. SN: 66262.

203A
100 HP Electric Motor
440V. 3 phase. On the frame that was with Lot 203.

203B
Chip Cyclone
13" inlet. 15" outlet. This one was on Lot 203.

204
30" x 22' Live Roll Case
9" rolls.

205
Husk
No blades.

206
Spiral Roll Case
2' x 9'.

207
Simonds Band Tensioner
Model: 930. SN 97930105. Type: SMO 930. 875 hours. Very good condition. Electric.

208
New Stake Pointer
Cutter head is missing. 10 HP electric.

209
McDonough Guide Dresser
SN: BDM-850. 3/4 HP 110V. Completely gone through. Very good condition.

210
MOAR Upright Band Saw
SN: 7988. 10 HP 208/220/440 V Electric.

211
Brewco B1600 Runaround Only
Completely gone through. Sandblasted and painted. Transfer chains only. No drive chains nor motors. 1st of an entirety.

211A
Brewco B1600 Resaw
Completely rebuilt. Brand new air set works. Line shaft ready. In new condition.

211B
Entirety Lot 211 - 211A
With a 10% raise.

212
Desiccant Air Dryer
Airteck TP3001-C. Will dry for a decent sized sawmill.

213
Salem Headrig
6' weight strain. SN: 45681R72. Slatbed offbearing belt. Has a shaft to bearing issue that should be an easy fix.

214
Globe Vibratory Finisher
SN: 216-7. Model: SV-3.

215
Morgan Scragg ill
What you see is what you get. Needs more parts before it's ready for production. SN: 042390050. This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

216
Newman KF-24 Ripsaw
100 HP 3 phase electric. Needs new belt, saws, and spacers. Ready to go otherwise as far as we know.

217
Mater 4 HB Carriage
19' carriage. All hydraulic except the dogs are air. Panagraph arm and Helle hydraulic carriage feed but no husk. 60' of track. Was in production spring of 2021. Has owners manuals.

217A
DY Turbo Turners
110V over air. New about 3 years ago. Still in excellent condition. Has owners manuals.

218
Echo CS-800P Chainsaw
24" Oregon bar. Runs very good.

219
15" x 10' Dead Rolls

220
Pallet Chief Pallet Nailer and Stacker
110V over air. 3 stringer. With some updated Woodpecker parts. Includes pallet stacker, nailers, and some extra parts. Good condition.

221
5 Strand Incline Transfer Deck
13' incline. 7' Flat. Not over width for trucking.

222
5 Strand All Incline Transfer Deck
11'6" wide x approx. 18' long. Electric drive with gear box. Has stops. Not over width for trucking.

223
Baker Runaround Resaw
1 1/4" band resaw. Mechanical head with shop built runaround. Line shaft ready. Was in working condition when removed. Model: BBR-O. SN: 93-514.

224
5 Strand Log Deck
Rooftop C55B chain. 36' long.

225
4400 LB Pallet Jack
does not go up and down.

226
2016 Baker 3665D Portable Band Mill
Cummins 65 HP diesel. 1400 hours. Computer setworks. New gauges. 7 - new 2" bands. Has 1 1/2" band wheels included to be swapped out if wanted. Has owners manuals. Has lights and brakes. Was operating 3 weeks before the auction.

227
36" Blower
With 20 HP electric motor. Rough condition.

228
20" Blower
No drive. Fan is worn quite a bit.

229
Cornell Edger Infeed
45" wide x 6' long x 31" high.

230
Baker Lateral Conveyor
Model: BLC-O. SN: 93-051. 1 HP 3 phase electric drive.

231
Hytrol Turn Rolls
18" rolls x 55" long x 39" high. 3/4 HP Electric drive.

232
XenoRol Dead Rolls
16" wide x 30' long. Used to be live rolls.

233
XenoRol Turn Rolls
16" wide x 10' long.

234
Dead Rolls
22" x 3' long x 40" high.

235
54" Dead Rolls
10' long x 7' high. Heavy duty.

236
39" Dead Rolls
5 sections 10' long x 7' high.

237
Bennett - Rireland Buzz Saw
Model: J-55-28.

238
Hytrol Roll Case
Light duty. 17" rolls. With 2 popup transfers. 2 HP electric drive. 13' long x 40" high. Good condition.

238A
Hytrol Roll Case
16" rolls. Light Duty with 2 popup transfers. 13' 6" long. 1/2 HP Electric drive. 40" high.

239
18" Blower
With 5 HP electric motor. Fan paddle is bent.

240
Phelps 20" Blower
Model: 25-K. Electric drive. Unkown HP.

241
24" Blower
No drive. Fan is worn quite a bit.

242
Drill Press
With lots of extra good bits.

243
50" Dead rolls
56" long x 14" high. Heavy duty.

244
Morbark 58" Chipper
No drive. 4 knife.

245
Portable Edger
1 moveable and 2 stationary blades. Blades spin freely. 6' infeed rolls and 5' 3" outfeed table with 2' roller extension. Needs to be rebuilt.

246
26" Dead Rolls
10' 9" long x 9 1/2" high. Looks like brand new!

247
Pendu 18" Belt Conveyor
11' long x 53" high. Hydraulic drive.

248
28" Roll Case
No drive. 5' long x 42" high. With spirals and adjustable legs.

249
22" Belt Conveyor
16' long x 49" high. With stop & load on air cylinders. No drive. Good condition.

250
Shop Built Chop Saw
7' infeed and outfeed. Air operated. 3 air stops. Line shaft ready.

251
Bucksaw
6' x 17'. Hydraulic drive. 48" bar. Working condition.

252
Tower Edger
4"x36". 2 moveable 1 stationery blade. Inserted tooth blades. Infeed and outfeed rolls. Line shaft ready.

253
JS Company Circle Mill
2 HB carriage with air dogs and brand new Frick handset. includes husk, track, frame, and drive.

254
Edmiston Circle Mill
4 HB 15' carriage with hydraulic dogs and air setworks. Cab, 56' track, and husk with top saw.

255
5.9 Cummins Power Unit
190 HP. Murphy controls. Runs excellent. Very similar to the one pictured. Actual photo coming soon.

255A
Cummins 220 HP Power Unit *
Model: NH220. Very low hours. Starts and runs perfect.

255B
John Deere 6404T Power Unit *
Hours are unknown. 145 HP. Rebuilt radiator. New water pump, rear seal, gauges, and turbo. 1 year old clutch. Ready to go.

256
John Deere 4039 Power Unit
100 HP. SN: T04039T419229. Model: 4039TF001. Murphy controls. Runs excellent. 

256A
John Deere 4045 Power Unit
80 HP. 840 hours from new. New clutch. New Murphy shutdown controls. Very good condition. Runs like a top.

257
3 Cylinder Kubota Power Unit
30 HP. Model: 1402. Only 628 hours. New clutch and radiator. Murphy controls. Runs excellent.

257A
2 Cyl Kubota Power Unit *
20 HP. Good working condition.

258
Morbark Stak Track
80' track. Working condition.

259
Royal Chip Bin
With hydraulic unit. 14'x 16'. This a very nice bin. Unassembled and ready to load.

260
Hosmer Edger
Model: ED43. SN: ED4324. 7" x 36". 1 moveable 1 stationary blade. Line shaft ready. Good condition.

264
Mellott #5 Log Turner
Chain type. Located at: 2697 Lawrence 1177, Miller, MO 65707.

261
43" Chain Log Turner
Hydraulic drive.

262
2 Strand Log Deck
5' x 21'. Stop and load. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707. 1st lot of an entirety.

265A
50 HP Electric Motor
This was on vertical edger. Located at: 2697 Lawrence 1177, Miller, MO 65707.

263
2012, 2 HB Meadows #3 Carriage
With cab and all controls and 60' of track. Mellott #5 Log Turner. Extra log catch above HB. Double dogs per HB. Computerized setworks. Located at: 2697 Lawrence 1177, Miller, MO 65707.

264
Self Contained Hydraulic Unit
Located at: 2697 Lawrence 1177, Miller, MO 65707.

265
Cedar Creek Vertical Edger
3 blade. With 2 lasers and 50 HP electric motor. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266
Corinth Husk With Laser
With laser that is currently mounted on vertical edger. 56" blade. Offbear belt to 8' of rolls. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266A
125 HP Electric Motor
With electric soft start. This was on the husk. Located at: 2697 Lawrence 1177, Miller, MO 65707.

267
Tyrone Berry Feed
240. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707.

268
Entirety Lot 262 - 267
With a 10% raise. Located at: 2697 Lawrence 1177, Miller, MO 65707.

269
Refurbished Lincoln 150 HP Electric Motor
This was on the mill that just sold. Located at: 2697 Lawrence 1177, Miller, MO 65707.

270
Phelps 24" Blower
Model: 25-K. 13" inlet. 7 1/4 X 9 1/2 outlet. Line shaft ready. Located at: 2697 Lawrence 1177, Miller, MO 65707.

271
Plywood Saw
Radial arm saw. Infeed and outfeed with scissor lift. Electric drive. Good condition.

272
Pendu Blower
26". 10" inlet. 8" outlet. Good working condition.

273
Chain Type Log Turner
36". Hydraulic.

274
Tyrone Berry Carriage Drive
Model: SMA-213. SN: A1778. Good condition.

275
60 Gallon Hydraulic Tank
With about 20 gallons of hydraulic oil in it.

276
Frick Husk
With 1 - 56" and 1 - 52" inserted tooth blade. Line shaft ready.

277
AirTeck Air Dryer

278
Hydraulic Tank

279
Tyrone SMA-524 Berry Feed
Carriage drive was used on handset Frick sawmill. Complete with pump, motor, and controls.

280
Radiator

281
Radiator

282
Airlock

283
Electric Motor 15 HP
3 phase.

284
Skid of Misc Electric Motors
Large electric motor is a 25 HP 3 phase.

285
Electric Controls
12V pump sells seperate.

286
Air Conditioner

287
Spiral Roll Case
8 3/4" rolls x 54" wide x 17' long. Electric drive. Excellent condition.

288
Wood-Mizer LT70 Portable Band Mill
55 HP Yanmar diesel. Approx. 14,000 hours on the mill and 7,000 hours on the diesel. Like new band wheels and lots of new parts. Hydraulic feed. Carriage drive needs stand-a-lone hydraulic unit. Good working condition.

292
Corley Shotgun Feed
2004. SMA280C. Motor Model: 01504FLF4UMQ. With 150 HP Toshiba motor. Motor SN: 0402103511. Includes controls. Ready to load.

289
Frick Circular Sawmill
Handset, 4 HB carriage ,track & frame, belt feed, Half moon log turner in framework. Production ready.

290
Early 1990 Rayco Pro Pallet Nailer
SN: 90001. Model: SBPM-3. Stanley Bostitch Nailers. Paint approx. 80%. 3 phase 480 Volts. Up to 64" capacity. 3 stringer. Was working. Hasn't been used for a year or so.

291
Corley 48" LP Carriage
16'x 48". 3 HB. Lineal positioning. Includes 2004 Lewis Control Ready Scan 1 system with Dyna Vision heads, cab, track, frame, and controls. Ready to load.

291A
Corley Bar Turner *
Approx 40". Good condition.

291B
Cornell 2 Saw Trimmer *
SN: STDB-357. Updated electrical. Electric drive. Very good condition.

291C
Roll case *
Also has drive chains for unscrambler. 24" wide x 15' long. Buyer has first choice on unscrambler.

291D
VFD Allen Bradley *
Powerflex 523. 10 HP. Like brand new.

291E
VFD Teco Westinghouse *
Model E-510. 2 HP. Excellent condition.

291F
100 HP Electric Motor *
3 Phase. Good condition.

291G
3 Electrical Boxes *
1 is a 200 Amp disconnect.

293
Montgomery Hog 45" *
Model: 45-CS-KC. SN: 1823. Top infeed. Bottom Discharge. 150 HP electric motor. Top feed chute is 8' tall. Needs new teeth but otherwise in excellent condition. First lot of an entirety.

293A
Mellott Feed Hopper for Stingy Material *
Includes flails on front end. 5' wide x 14' long. Electric drive. Excellent condition.

293B
Mellott 3' x 11' Belt Conveyor *
Electric drive. Approx. 10" sides. Excellent condition.

293C
Mellott Incline Belt Conveyor *
3' x 25'. Electric drive. Does not include the metal detector. Concave style. Heavy duty. Excellent condition.

512
Case W14 Wheel Loader
PIN: 9129285. Hours unknown. Includes forks. Brakes do not work. Has a few hydraulic leaks. Otherwise in good working condition.

293D
MDI Metal Detector *
5' fiberglass section. Includes controls. Excellent condition.

293E
Mellott 5 HP Hydraulic Unit *
Excellent condition.

293F
Mellott Incline Belt Conveyor *
3' x 47' overall. 8' is flat then goes on incline. Electric S drive. Was used under Montgomery hog. Heavy duty. Excellent condition.

294
Entirety lot of 293 - 293F - Complete System for Regrinding Bark *
With a 10% raise.

295
Skate Rolls *
64" x 10' x 28" high

296
64" McDonald Bandwheel for Headrig *
9 1/4" face

297
Covered Waste Conveyor *
26" x 32', 13" paddle chain, 10" sides, hydraulic drive

298
Tailing Belt *
5" x 27', needs belt (4")

299
Air Powered Lift Arms *
2' x 11' 2", was used to lift boards from rollcase up onto edger

299A
Belt Conveyor *

300
Belt Conveyor *
16" x 91", no drive, 10" cleated belt

301
2 Strand Transfer Deck *
24" x 69"

302
Skate Rolls *
12"-24" wide x 8'-10' long, 5 sections

303
Tailing Belt *
6 1/2" x 88", 5" belt, hydraulic drive

304
Hytrol 180 degree Conveyor *
Serial # 573934, 94" x 124" overall, 18" conveyor belt, 30" adjustable legs

305
50" 3 Blade Edger *
20" blades, no drive, rough condition, 2 moveable blades

306
J.A. Vance 42" Edger *
No drive

307
Whirlwind 18" Dust Blower *
8" inlet, no drive, brand new

308
4 Strand Unscrambler *
10' x 10' x 6' high, no drive

309
32" Exhaust Fan *
14" inlet, electric drive

309A
32" Exhaust Fan *
14" inlet, electric drive

309B
32" Exhaust Fan *
14" inlet, electric drive

309C
32" Exhaust Fan *
14" inlet, electric drive

310
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310A
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310B
24" Exhaust Fan *
8" x 15" square inlet, electric drive

311
Baghouse *
54" x 72" x 15' tall

312
Steel Dust Pipe *
18" x 20', 6 bolt-together sections

313
Dust Pipe *
22" x 5', 12 sections

314
Dust Pipe *
28" x approx. 200', 2- 90 degree elbows

315
5 HP Hydraulic Pack *

316
3 HP Hydraulic Pack *

317
3 HP Hydraulic Pack *

318
7 1/2 HP Hydraulic Pack *

319
7 1/2 HP Hydraulic Pack *

320
7 1/2 HP Hydraulic Pack *

321
Hydraulic Pack *

322
20" Blower *
Electric drive

323
24" Blower *
10" inlet, 30 HP electric motor

324
32" NYB Blower *

325
24" Blower *
16" inlet, no drive

326
36" Blower *
16" inlet, no drive

327
36" Blower *
12" inlet, 30 HP electric motor

328
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

329
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

330
Hourglass Rollcase *
30" x 40', 12" x 22 1/2" rolls, 30" roll spacing

331
Salem Bar Turner *

332
36" Sanborn Bandmill *
# 85-01-53, 6" band, needs to be gone through

333
Jeffery Hog *
Model 54WB, serial # 14213, no drive

334
24" Cornell Blower *
10" inlet, no drive

335
36" Blower *
14" inlet, no drive

336
60" Blower *
41" inlet, no drive

337
24" Cornell Dust Blower *
10" inlet, electric drive

338
36" Blower *
28" inlet, no drive or shaft

339
Airlock *
Electric drive

340
20" Airlock *

341
Brewer 4 Strand Transfer Deck *
10' 6" x 19' x 40" high, air popups

342
Over the Wheel Tracks for Skid steer *
For 10.5 tire

343
40" Mellott Chain Turner *

344
Electric Motor *

345
Waechter 3 Head Resaw with Return *
Model 24, serial # 2021, center head is the only one currently operable, compatible with Wood-Mizer parts

346
40 HP Hydraulic Pack *

347
Schutte Buffalo Hammer Mill *
Model 1320, serial # 04-04-076

348
Steel I-Beams *
12" x 16' x 9' 6", 2 pieces

349
4 Strand Transfer Deck *
12' x 13' 4" x 32" high, electric drive, roof top chain

350
Blo-Hog *

351
Rotating Table *
48" x 56", electric drive

352
Amerimulch Coloring Machine *
Electric drive

353
Hard Maple Burl Log *
Approx 9' long, 15" log diameter, and 55" burl diameter.

354
48" Dust Blower Completely Rebuilt *
22.5" Inlet Diameter. 20" Outlet (Square). Completely rebuilt! No power.

355
HMC 4 HB Carriage *
Model: AC44. SN: SC44-117. Air over air setworks. Some spare parts.

356
Band Pallet Dismantler *
60" capacity. Electric drive. 10 HP 3 phase. Good condition.

357
Crown Pallet Jack *
24 V battery drive. Good working condition.

357A
Crown Pallet Jack *
24 V battery drive. Good working condition.

357B
Crown Pallet Jack *
24 V battery drive. Good working condition.

358
6 Strand Transfer Deck *
9 1/2' wide x 14' long. C55 rooftop chain. Very good condition.

359
3 Strand Transfer Deck *
7' x 15'. C55 roof top chain. Electric drive. Good condition.

360
Dust Cyclone *
44" diameter. 8' tall. 3 - 8" inlets. Stainless steel. Excellent condition.

361
6 Semi Tires *
5 have rims.

362
55 Gallon Steel Barrels *
2 per lot.

362A
55 Gallon Steel Barrels *
2 per lot.

362B
55 Gallon Steel Barrels *
2 per lot.

362C
55 Gallon Steel Barrels *
2 per lot.

362D
55 Gallon Steel Barrels *
2 per lot.

363
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363A
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363B
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363C
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363D
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363E
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363F
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363G
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363H
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363I
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363J
Plastic 250 Gallon Tote *
1 per lot. Good condition.

364
Waste Conveyor *
On incline except 3' flat. 36" wide x 15' long overall. Paddle style. Hydraulic drive. Good condition.

365
Skid of Hydraulic Hoses and V Belts *

366
2 Air Impacts *
with some sockets. Working condition.

367
12 Volt Heater *
Good condition.

368
Automatic Propane Scales *
For 20 LB cylinders.

369
5 Skids of H-78 Chain *
With 3 drive sprockets. Several hundred feet.

370
Portable 230 Air Compressor *
Engine needs to be rebuilt but compressor works good.

371
Iveco C13 Diesel *
49873. TIPO: C13ENTD20.00A800. Around 17,000 hours. With extra filters, controls and wiring. Good working condition.

372
Dyna Products Vertical Sizer *
No cutter head. Hydraulic drive. Good working condition.

373
Oil Cooler *
24" x 24". Hydraulic driver for fan.

374
Quincy Model 240 Air Compressor *
Size: 4x3. Working condition.

375
Barn Sweep Chain *
Cornell style. 17" paddles. 50' long. Good condition.

376
Barn Sweep Chain *
Cornell style. 11" paddles. 2 sections. 70' total.

377
Ladder Back Chain *
25' long approx 12" wide.

378
Catwalk with Railing *
30" wide x 22' long. Very good condition.

379
Skid of 90's and 45's for 8" Diameter Dust Pipe *
PVC

380
Steel Lumber Cart *

381
Skid of Hyd Flow Controls, Pulleys, and Sprockets *

382
2 Pulleys *
10 groove 16" diameter for D belt. Hub is 2 7/8" shaft.

383
West Salem Grinder *
52" Wide. 100 HP electric motor. Includes Vibrating conveyor. 52" W x 17' L. Electric drive on the vib. conveyor as well. Includes electrical panel. Overall in good condition.

384
48" Dust Blower *
16" inlet. Electric drive. Needs belts. Good condition.

385
Shavings Bagger *
3 bay bagger. Includes hydraulic unit. Good condition.

386
2 Skids of Rollers *
Approx. 6 1/2" diameter x 7' long. Excellent condition.

387
Skid of Rollers *
Approx. 8" diameter x  7' long. Good condition.

388
Debarker with Barn Sweep *
Was ready to run but has sat for a few years.

389
JD 6068 Diesel Power Unit *
Radiator. New alternator. Changed oil. New battery. Clutch. C groove pulley. New Murphy shutdown controls and wiring in 2021. Runs good. Unknown hours but thinks maybe around 10,000. Uses no oil.

389A
Hydraulic Reservoir *
Approx. 450 gallon capacity. 1/3 full of hyd oil.

389B
Hydraulic pump *
15 GPM & 10 GPM. Needs new shaft.

390
Meadows Edger *
36" wide. Power Horse 420CC gas engine. Good for 1"-2" with current engine. Capability up to 4" with bigger engine. Current engine is a little small.

391
Fast Trac Portable Bandmill *
Takes 4 1/2 to 6 inches wide bands. All motors are on it. Comes with the cab, log turner, and an outfeed belt.

392
Belt Conveyor *
24" wide x 12' long. Electric drive. Good condition.

393
Cornell Cutoff Saw *
24" blade. 28' infeed and outfeed. Electric drive. Working condition.

394
3 Head Trim Saw *
16" blades. Electric drive with lasers. 12' capacity.

395
Self Dumping Hopper *
Vestil. 4' x 4' x 2'. 2000 lb capacity.

396
Rack of Various Conveyor Belts *
All brand new.

397
Wooden Lumber Cart *

398
Belt Conveyor *
4' x 17'. Electric drive.

399
Belt Conveyor *
53" wide x 16' long. Electric drive.

400
9 Step Stairs *
3' wide x 6' high. 10'6" long.

401
Pallet Chief IIII *
With stacker. Good working condition.

402
21" x 30' Auger *
Electric drive.

403
CompAir Air Compressor *
Hydro vane. 6645 hours. Excellent condition.

404
Dust Filter System *

405
Air Tank *
Approx. 80 gallon capacity.

406
Shock Absorption Roller *

407
Baker 2 Head Resaw *
Electric drive. Good condition. Has been sitting for a year.

408
Morgan Scragg Mill *
Hydraulic power pack included. Inserted tooth blades. Electric drive. Good working condition.

409
Brewer Gang Saw *
SN: 111988. Model: BR_2487. Single arbor. Infeed rolls. Pallet of new blades, spacers, and some parts. Electric drive. 100 HP electric motor and a few smaller ones included. Good working condition.

410
Georgetown Pallet Jack *
5500 LB. Capacity. Brand new rebuild kit. Works like new.

411
Miller CP-250TS Welder *
Comes with whip, ground, and gas line. No tank. Good working condition.

412
Log Turner *
Needs work.

413
Chop Saw *
With 10' infeed. 4' outfeed. 4 air stops. Hydraulic powered, includes hydraulic pump. FIRST LOT OF AN ENTIRETY.

414
Pendu 5000 Gang Saw *
Lineshaft ready. Has 188 HP Duetz power unit. Includes two 24" dust blowers and spacers.

415
140 - 10" Gang Saw Blades *

416
Unscrambler *
With infeed deck that is 2 strand x 10' long. 2 strand unscrambler has hydraulic drive.

417
Entirety of Lots 413 - 416 *
With a 10% raise.

418
38" Burlington Wide Belt Sander *
With 8 extra belts. 3 phase electric drive. Double head. good working condition.

419
4 Log Bunks *

500
1991 45' Walking Floor Chip Trailer
CPS in good working condition.   VIN: 1C9535620MP389278

501
John Deere 440C Cable Skidder
SN: 292234T. Meter reads 1312 hours but may not be accurate. John Deere engine. Good working condition.

502
John Deere 340D Cable Skidder
SN: DW340DA502149. Meter reads 9979 hours. 83" blade. Good working condition. Winch cover is missing. May have a hydraulic leak but can't see where.

503
Skidder Tire Chains
Bear claw. Enough for 2 tires. Very good condition.

504
Brand New Tires
Nylon tubeless 24 Ply rating. 20.5-25. L-3/E-3. DL-3. 20 PLX. Set of 2

505
Trailer Hitch Receiver Attachment
Brand new. Skid steer attachment.

506
Utility Service Trailer
No brakes. Good title. MVIN: 372854 IND. As is. Everything was still working when he quick using it. All tools pictured come with it. Quincy air compressor with Honda engine.

507
Lane 2408 Tub Grinder
JD 6068 Power unit. Model: 6068TF275D.E.H. SN: PEG6068T431721. 1568 hours from new. Electronic controlled. 11' concave outfeed belt. Jacks and belts are hydraulic. Has a remote but the remote does not work. Could possibly be repaired. One sweet machine!

508
Lane LSC-35 Concave Belt Conveyor
30" x 35'. Honda engine powers hydraulics. Hydraulic lift, drive on belt, and jacks. Approx. 1000 hours from new. Lights.

509
Morbark 950 Tub Grinder
Model: 950. SN: 555-025. Freshly painted. Extra screens. JD model T06068TF150 diesel. 6.8 L. 170 HP @ 2500 RPM. Meter showing 1960 hours.

510
Axels for 19.5 Tires.
This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

511
Bunton 52" Lawnmower
Vanguard 20 HP motor. Works good.

513
1981 Cat 518 Cable Skidder
Machine SN: 50S03196. Rebuilt 3304 engine SN: 78P5614. Rebuilt torque converter. New transmission pump. Center pins and bushings are worn a little but are still useable. Winch was worked on but needs slight adjustment and does not freewheel. No tire leaks. Unknown hours. Extra winch that is included fits this machine but it does have some parts missing. This Lot is located at 5141 Produce Rd, Port Trevorton, PA 17864.

514
Set of Diamond Tire Chains
Set of tire chains for 28-l double diamonds. Used very little. Tires are bad.

515
Delimber CTR 314
For landing loader.

516
Sellick SD-80 Forklift
Diesel. Works and operates well. Hour meter is not accurate.

517
John Deere 644B Wheel Loader
Runs and operates. Just got out of the shop to replace rear axle. Works very well.

518
Swinger Wheel Loader
200-2079 LT 5000. Perkins engine. Foam filled tires. New battery. Weights for the back. 5060 hours. Just went through it. A good solid machine.

519
1992 Freightliner FLD112 Truck, VIN # 1FUY3ECB7NP522751
Year: 1992
Make: Freightliner
Model: FLD112
Vehicle Type: Truck
Mileage:
Plate:
Body Type: Highway
Trim Level:
Drive Line: 6x4
Engine Type: Cat L6, 10.3L (629 CID)
Fuel Type: Diesel
Horsepower: 276-335HP
Transmission: 9 speed
VIN #: 1FUY3ECB7NP522751

Features and Notes: Clear title. Needs a new tire. DOT compliant. Operates very good. Mileage may not be accurate.

520
Prentice Grapple *

521
Brand New Light Duty Log Hauler *
For firewood logs.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Showcase Equipment Consignment Auction – Sawmill and Forestry Equipment

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
11751 CR 12
Middlebury, IN 46540
Sale Dates and Times
Thursday Nov 11, 2021 Completed
Friday Nov 12, 2021 Completed
Sale Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Consignments Wanted including but not limited to: Sawmill, Pallet Shop, Industrial Woodworking, Metalworking, Skidders, Loaders, Dozers, Lifts, Forklifts, Skid Loaders, Tractors, Etc.
Absolute! No Minimums, No Reserves!

Booth space available for Vendors!

Call or email Darrin at 574.536.1646 (db@showcaseequipment.us) for booths or to consign.

Sales tax is charge unless valid exemption is filed.

00
Information lot *
This auction will begin at 9 AM. We will sell in catalog order. A 7% sales tax will be charged on all purchases unless you have a valid exemption. All equipment is ready to load. Free loadout will be available the day of the auction and the 2 weeks following the auction. After 2 weeks, loadout will be by appointment and for a fee. For loadout questions call 260.585.2388.

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

099
1/25 Scale Wood-Mizer LT40 Portable
Super hydraulic sawmill. Die Cast. Head moves up and down and along track. Cute little model!

099A
1/32 Scale Tigercat 234B Knuckleboom
Model, Die-Cast Knuckleboom Loader

100
Construction Machinery Table Saw
Model: K. SN: 7429. 3 phase 5 HP electric motor. 16" Blade.

101
Industrial Radial Saw
Model: 02319 CRAFTSMAN. SN: 81460081. 208-240/480 Volts. 12" blade.

102
Monarch Uni-Point Saw
SN: 48 483. 220/440 Volts. 5 HP motor. 14" Blade.

103
Morgan Band Scragg Mill
2 stationary heads @ 3 1/2". 6" to 14" log capacity. 11' infeed chain. 1 1/4" bands. Hydraulic feed. Line shaft ready. Went through and reinforced in some areas. Good working condition. The reason I am selling is I have too many big logs for this machine.

104
Morbark Double End Trim Saw
Trim saw for a post peeling operation.

105
Log Trough
22" wide x 20' long. 6 1/2" wide chain. Hydraulic drive. Very good condition.

106
Stenner Single Head Resaw
Model: MH59. 12" x12" capacity. 36" band wheels. 4" band. No drive. Includes infeed and outfeed.

107
Stringer Reclaim Saw
5 1/2" capacity. Was used to reclaim stringers. Electric drive. Good condition.

108
Sullair Screw Compressor
Model 20-150L. 150 HP electric motor. Good condition.

109
International UV549 Natural Gas Genset
750 hours. Onan Generator. 3 phase. 220 Volts. 75 KW.

110
Scragg Mill
4" or 6" cants. No power

111
Miner Edger
6" capacity, needs blades and parts for movable blade.

112
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112A
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112B
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

114
Cornell Slab Saw
Model: SHL. SN: 387-177. 31" blade. Electric drive. 10' Belt conveyor included but no belt.

115
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center.  Powered rollers. BRAND NEW!! Never installed.

115A
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115B
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115C
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed. SOME BEARINGS ARE BROKEN LOOSE FROM THE FRAME.

116
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116A
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116B
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

117
Scissor Lift Lift Table
70" x 94" table. 30,000 lbs capacity. Electric powered. Good condition.

118
Robinson Vertical Resaw
3" upright band head. 36" band wheels. No power. Bare machine.

119
Timesavers 3 Head Sander
1988. Model 852-5CB. SN: 19340. 52" wide capacity. 25 HP electric motors on heads. Complete and ready to be installed.

120
Prescott Band Headrig
6'. Weight strain. Runs 12" blades.

120A
Weg 200 HP Electric Motor
890 RPM's. 460V. 3 Phase.

121
Filer and Stowell Band Head Rig
7'

121A
Teco 200 HP Electric Motor
890 RPM's. 3 Phase. 480 Volts.

122
Fulghum 60" Chipper
6 knife. Top discharge. 75 HP electric motor. Working condition.

123
Morbark Hour Glass Rollcase
40'. Electric drive. Hyd powered kickers. Good condition.

124
Corley Gang Edger
6" gang edger combo. Laser. 2 movable blades with hydraulics. Electric drive. All controls.

125
Unscrambler
4 strand. Hydraulic drive. 8' wide x 30" long

126
Salem Log Trough
30' long. Electric drive. 120 ladder back chain. Heavy duty built and in excellent condition.

127
Progress Unscrambler
3 strand. 10' wide. Electric drive. Very good condition. Overall dimensions 11' 9" wide x 8' 10" high.

129
Tilt Hoist *
SN: 285. Electric drive. Includes hydraulic unit.

128
Crosby Trim Saw
Model: 6225 iv. Size 4 8 saw. With 3 phase electric motor. Very easy to switch to line shaft. Very good condition.

130
Waste Conveyor
18" x 53' long. Electric drive. Ladder back chain. Good condition.

131
Trim Saw
8 saw. Drop blade grade trim saw. Will pass an 18' board. Electric drive, 6" thick capacity. Good working condition.

132
Belt Conveyor
54" wide x 45' long. Like new cleated belting. Electric gear box drive. Enclosed belt return. Good condition.

133
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition.

134
Mellott Transfer Deck
4 strand. 11' 6'' wide x 10' long. With stops. Electric drive. Good condition.

135
Log Trough
15' long. Dual H-78 chains. Gear reduction drive.

136
Green Chain
4 strand. 12' x 70'. Heavy duty built. Electric drive. Good condition.

137
Green Chain
4 Strand. 149' long. Like new H-78 chain. 3 phase electric motor and gear box drive.

138
Green Chain
3 strand. 21' long. 2 strand rooftop, 1 strand H-78 chain. Electric drive. Very good condition.

139
Waukesha Power Unit
SN: 360536. Model: VRG232U. Spec: G-41138. With Twin Disc clutch.

140
Dewalt Radial Arm Saw
Model: 35020. 20" Blade. Electric drive.

141
Lift Table
4' x 6'. Electric lift.

142
Hercules Industries Man Cage
36" square. Model: KI-161. SN: 62311. 500 pound capacity.

143
4 Arm Kickers
149" center of bearings.

144
Roll case
16" x 57" dead rolls. 36" high. 2" rolls.

145
GoFast Deduster
All hydraulic. Needs work.

146
Profile Cutter
Setup to cut profiles with dadoes on ends.

147
Roll Case With Fork Slots
16" x 111" per section or roll case. Center section is live. 90" x 111" overall.

148
Single End Trim Saw
Electric drive.

149
Custom Built Wide Cut Slab Mill
Similar to  TruCut. 2" bands. 60" capacity. Fully hydraulic. Hyd band tensioner and guides. Self contained. 70 HP John Deere diesel. 1424 hours on engine and approx 600 hours on the mill.

150
Cat 250 KW Genset

Cat 3306B diesel SN: 85Z04348. 23,710 hours. Was rebuilt at 12,000 hours. Generator is a 3 phase 480V. Great running unit.


151
2013 Wood-Mizer LT70 Portable Sawmill
30 HP 460V Electric motor. 5898 hours. Distributed control system. Debarker. Log loader. Cant flipper. Log turner. Loaded. 10 new bands. Trailer package included but not installed. VIN: 456D72419DNBB5906.

152
Montgomery Blo Hog
26". Top feed. Some new anvils. New gate. Blower has little wear but still in excellent condition. Comes with a hopper.

153
Sawdust Cyclone
2 intakes, 12 x 22 and 10 x 22. 24 in. round collar on one. 12" round outlet. 12' long x 4' diameter overall.

154
Phelps 24" Blower
No. 25-K. 12" round inlet. 9" outlet. Line shaft ready.

155
Meadows #1 Portable Circle Mill
3 HB carriage with 2 dogs. No wheels on axles. All manual. 50" blade with inserted carbide teeth. Lot # 155C ran this mill.

155A
50" Blade
With inserted carbide teeth.

155B
50" Blade
With inserted carbide teeth.

155C
Cummins 4 Cyl Power Unit
110 HP.  1833 hours. Mfg date 5/28/14. SN: 60130539. PEC Mfg. clutch. Model: C01113AZ. SN: SH11003. Muffler included. Murphy controls. Runs excellent. This unit was used on Lot# 155.

155D
Lincoln 75 HP Electric Motor
230/460 volts. 1775 RPMs. 365T frame. 3 phase. SN: 2735408. Was on Lot# 155. As is.

156
Roll case with Fork Pockets
5" x 82" rolls. 75" x 91" overall. Good condition.

156A
Roll case
5" x 82" rolls. 75" x 91" overall. Electric drive.

157
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

157A
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

158
SCMI 36" Sander
Sandya Uno. Model: Uno CS. SN: AE009339. Electric. 230/460 Volts. Feed belt still in good condition.

159
36" Sander
New drive roller in 1997. Feed belt is worn a little. Air drive. Electric drive on feed belt.

160
2 Pulleys
20 1/2" 8-groove pulley with a 4 7/16" collar. 8 1/2" 4-groove pulley with a 2 1/4" collar.

161
Cummins Power Unit
300 HP. Model: NTC335. 8414 hours. SN: 10318132. CPL 174. Twin disc clutch. Model: SP214P1 SN: 141268. New guts in clutch. Fires right up. Good condition.

162
Log Deck
2 strand. 7' x 23'. H78 chain. Speed reduction gear drive. Excellent condition.

163
Cat D333A Power Unit
6 cyl. 165 HP. SN: 87B572. 5290 hours. Cat Twin Disc clutch spec: 30365. Hasn't been started for 2 years. Was working good when taken out of production.

164
3 Sections Dead Rolls
(1) 23" x 113". (1) 23" x 73". (1) 18" x 112".

165
Frick Portable Circle Mill
2 HB carriage. Pipers Saw Shop headblocks. Manual. Air dogs. Hydraulic on newer mandrill and carriage drive. 52" inserted tooth blade. 5 groove pulley. 24.6-1 air motor. 33.8T01 air motor. 2 extra carriage wheels. Brand new hydraulic valve bank.

166
Iron Bull Self Dumping Hopper
10' x 66". 7000 lb capacity.

167
Cornell 6x36 Edger
SN: HE289672. 2 moveable blades. 10' infeed. 25 HP Electric motor. Could easily be switched to line shaft. 110V Lumberline lasers with Meadows measurement dial. 10 extra blades sharpened and ready to go. Very good condition.

168
Belt Conveyor
30" x 15'. Electric drive. Very good condition.

169
Edmiston 4 Blade Edger
SN: HE372E16. Mfg Date: 10/03/03. 4" x 36" capacity. 2 moveable (1 is warped) and 2 stationary inserted tooth blades. Hydraulic drive. Very good condition. 169A was used to run it.

169A
Cummins 4 Cyl Power Unit
110 HP. 2900 hours. Mfg date 4/21/04. SN: 30674268. WPT clutch with ball bearing kit installed recently. SN: W13057806010. Model: WTD-11-130. Runs excellent.

170
international A175 Power Unit
175 HP. 1996. With a clutch. Anti-Freeze line is broke when loading but ran before it broke. Starts very easily.

171
2021 EZ Boardwalk M40 Portable Sawmill
Upgraded IGX 700 Honda engine. 40" diameter x 16' 6" log capacity. 34" slab width. Only 11 hours!! Demo unit.

172
Jones Saw Grinder
Model 7A. SN: 75052A. Very good condition.

173
Roll Case with Popup Cross Transfer
25" x 15' roll case with a 4 strand 8' x 8' air powered popup transfer.

174
Newman 40 HP Electric Motor
3 phase. 1800 RPMs. 208/220/440 volts. As is.

175
Dead rolls
2 1/2" x 16" x 12' dead rolls

176
Phelps 40" Dust Blower
Model: 45HV-1. SN: 22997. 1900 max RPM. Good condition.

177
All the dust piping in pictures
(1) 14" x 23'5". (1) 14" x 39'2". (1) 14" x 7'4". (1) 14" x 32'. (2) 12" x 39'2". Comes with all the elbows, etc. as pictured.

178
Cooks Cat Claw Sharpener
Line shaft ready. Suffolk dual tooth setter.

179
Rotobek Grapple
Continuous rotation. Model: 4552HD-A-BF3-CB6-1. SN: 70003499R0-739602.

180
Worldwide 25 HP Electric Motor
1770 RPMs. 230/460 volt. 284T frame.

181
250 Gallon Fuel Tank
Still has some fuel. Has a hole 16" from the bottom.

182
Kohler 449 KW Genset
New Intelilite MRS19 control system 565 hours ago. New cam shaft. Approx. 10,000 - 11,000 hours. Model: D40012.1A65. New fuel filters. Starts right up and works excellent. Good clean machine.

184
John Deere 47 KW Genset
Model: 4039DF001. Serial: T04039D401471. Unknown hours. Exciter part is bad in generator. Diesel starts right up and run good.

185
Kohler Power System Enclosure
86" x 176". Sound attenuated. Was used with Lot # 182.

186
Steel Steps
25" wide x 44" high.

187
4 Strand Log Deck
Has C55D rooftop chain. Electric drive with Iron Man gear box. 11' wide x 12' long. Excellent condition.

188
43" x 11' Cyclone
11" round inlet. 10" outlet.

189
48" x 9'6" Cyclone
10" and 12" inlets. 11" outlet with airlock.

190
30" x 7' Cyclone
10" and 11" inlets. 10" outlet.

191
30" x 41" x 9'7" Belt Conveyor
Convey Ability. 110V electric motor with gear reduction drive.

192
50" x 7' Lumber Cart
With all swivel casters.

193
Various belting and conveyor parts

194
Cat Walk with Steps

195
Swinging All Manual Chopsaw
Electric drive. 18" blade. 4 stops. 15' infeed. 8' outfeed. Just out of production.

196
Precision 66" Chipper
Model: 66.18. SN: C.2944. 6 Knife. Just out of production.

197
Baker Edger
Model: BE-O. SN: 07-303. 20 HP electric motor per blade. Split arbor. Inserted tooth blades. Hydraulic infeed and outfeed. Just out of production.

197A
15 HP Hydraulic Unit
Barker Products. Model: BP-15-60-PUR1520B15. SN: 91.99.

198
York Furnace and Air Conditioner

199
Steam Valves

200
Frick Husk
No blade. Hydraulic drive.

201
Mellott Belt Conveyor
24" x 74'. No drive.

202
13' Barnsweep
The bottom has holes.

203
Chip Master 48" Chipper
6 knife. Very good condition. SN: 66262.

203A
100 HP Electric Motor
440V. 3 phase. On the frame that was with Lot 203.

203B
Chip Cyclone
13" inlet. 15" outlet. This one was on Lot 203.

204
30" x 22' Live Roll Case
9" rolls.

205
Husk
No blades.

206
Spiral Roll Case
2' x 9'.

207
Simonds Band Tensioner
Model: 930. SN 97930105. Type: SMO 930. 875 hours. Very good condition. Electric.

208
New Stake Pointer
Cutter head is missing. 10 HP electric.

209
McDonough Guide Dresser
SN: BDM-850. 3/4 HP 110V. Completely gone through. Very good condition.

210
MOAR Upright Band Saw
SN: 7988. 10 HP 208/220/440 V Electric.

211
Brewco B1600 Runaround Only
Completely gone through. Sandblasted and painted. Transfer chains only. No drive chains nor motors. 1st of an entirety.

211A
Brewco B1600 Resaw
Completely rebuilt. Brand new air set works. Line shaft ready. In new condition.

211B
Entirety Lot 211 - 211A
With a 10% raise.

212
Desiccant Air Dryer
Airteck TP3001-C. Will dry for a decent sized sawmill.

213
Salem Headrig
6' weight strain. SN: 45681R72. Slatbed offbearing belt. Has a shaft to bearing issue that should be an easy fix.

214
Globe Vibratory Finisher
SN: 216-7. Model: SV-3.

215
Morgan Scragg ill
What you see is what you get. Needs more parts before it's ready for production. SN: 042390050. This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

216
Newman KF-24 Ripsaw
100 HP 3 phase electric. Needs new belt, saws, and spacers. Ready to go otherwise as far as we know.

217
Mater 4 HB Carriage
19' carriage. All hydraulic except the dogs are air. Panagraph arm and Helle hydraulic carriage feed but no husk. 60' of track. Was in production spring of 2021. Has owners manuals.

217A
DY Turbo Turners
110V over air. New about 3 years ago. Still in excellent condition. Has owners manuals.

218
Echo CS-800P Chainsaw
24" Oregon bar. Runs very good.

219
15" x 10' Dead Rolls

220
Pallet Chief Pallet Nailer and Stacker
110V over air. 3 stringer. With some updated Woodpecker parts. Includes pallet stacker, nailers, and some extra parts. Good condition.

221
5 Strand Incline Transfer Deck
13' incline. 7' Flat. Not over width for trucking.

222
5 Strand All Incline Transfer Deck
11'6" wide x approx. 18' long. Electric drive with gear box. Has stops. Not over width for trucking.

223
Baker Runaround Resaw
1 1/4" band resaw. Mechanical head with shop built runaround. Line shaft ready. Was in working condition when removed. Model: BBR-O. SN: 93-514.

224
5 Strand Log Deck
Rooftop C55B chain. 36' long.

225
4400 LB Pallet Jack
does not go up and down.

226
2016 Baker 3665D Portable Band Mill
Cummins 65 HP diesel. 1400 hours. Computer setworks. New gauges. 7 - new 2" bands. Has 1 1/2" band wheels included to be swapped out if wanted. Has owners manuals. Has lights and brakes. Was operating 3 weeks before the auction.

227
36" Blower
With 20 HP electric motor. Rough condition.

228
20" Blower
No drive. Fan is worn quite a bit.

229
Cornell Edger Infeed
45" wide x 6' long x 31" high.

230
Baker Lateral Conveyor
Model: BLC-O. SN: 93-051. 1 HP 3 phase electric drive.

231
Hytrol Turn Rolls
18" rolls x 55" long x 39" high. 3/4 HP Electric drive.

232
XenoRol Dead Rolls
16" wide x 30' long. Used to be live rolls.

233
XenoRol Turn Rolls
16" wide x 10' long.

234
Dead Rolls
22" x 3' long x 40" high.

235
54" Dead Rolls
10' long x 7' high. Heavy duty.

236
39" Dead Rolls
5 sections 10' long x 7' high.

237
Bennett - Rireland Buzz Saw
Model: J-55-28.

238
Hytrol Roll Case
Light duty. 17" rolls. With 2 popup transfers. 2 HP electric drive. 13' long x 40" high. Good condition.

238A
Hytrol Roll Case
16" rolls. Light Duty with 2 popup transfers. 13' 6" long. 1/2 HP Electric drive. 40" high.

239
18" Blower
With 5 HP electric motor. Fan paddle is bent.

240
Phelps 20" Blower
Model: 25-K. Electric drive. Unkown HP.

241
24" Blower
No drive. Fan is worn quite a bit.

242
Drill Press
With lots of extra good bits.

243
50" Dead rolls
56" long x 14" high. Heavy duty.

244
Morbark 58" Chipper
No drive. 4 knife.

245
Portable Edger
1 moveable and 2 stationary blades. Blades spin freely. 6' infeed rolls and 5' 3" outfeed table with 2' roller extension. Needs to be rebuilt.

246
26" Dead Rolls
10' 9" long x 9 1/2" high. Looks like brand new!

247
Pendu 18" Belt Conveyor
11' long x 53" high. Hydraulic drive.

248
28" Roll Case
No drive. 5' long x 42" high. With spirals and adjustable legs.

249
22" Belt Conveyor
16' long x 49" high. With stop & load on air cylinders. No drive. Good condition.

250
Shop Built Chop Saw
7' infeed and outfeed. Air operated. 3 air stops. Line shaft ready.

251
Bucksaw
6' x 17'. Hydraulic drive. 48" bar. Working condition.

252
Tower Edger
4"x36". 2 moveable 1 stationery blade. Inserted tooth blades. Infeed and outfeed rolls. Line shaft ready.

253
JS Company Circle Mill
2 HB carriage with air dogs and brand new Frick handset. includes husk, track, frame, and drive.

254
Edmiston Circle Mill
4 HB 15' carriage with hydraulic dogs and air setworks. Cab, 56' track, and husk with top saw.

255
5.9 Cummins Power Unit
190 HP. Murphy controls. Runs excellent. Very similar to the one pictured. Actual photo coming soon.

255A
Cummins 220 HP Power Unit *
Model: NH220. Very low hours. Starts and runs perfect.

255B
John Deere 6404T Power Unit *
Hours are unknown. 145 HP. Rebuilt radiator. New water pump, rear seal, gauges, and turbo. 1 year old clutch. Ready to go.

256
John Deere 4039 Power Unit
100 HP. SN: T04039T419229. Model: 4039TF001. Murphy controls. Runs excellent. 

256A
John Deere 4045 Power Unit
80 HP. 840 hours from new. New clutch. New Murphy shutdown controls. Very good condition. Runs like a top.

257
3 Cylinder Kubota Power Unit
30 HP. Model: 1402. Only 628 hours. New clutch and radiator. Murphy controls. Runs excellent.

257A
2 Cyl Kubota Power Unit *
20 HP. Good working condition.

258
Morbark Stak Track
80' track. Working condition.

259
Royal Chip Bin
With hydraulic unit. 14'x 16'. This a very nice bin. Unassembled and ready to load.

260
Hosmer Edger
Model: ED43. SN: ED4324. 7" x 36". 1 moveable 1 stationary blade. Line shaft ready. Good condition.

264
Mellott #5 Log Turner
Chain type. Located at: 2697 Lawrence 1177, Miller, MO 65707.

261
43" Chain Log Turner
Hydraulic drive.

262
2 Strand Log Deck
5' x 21'. Stop and load. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707. 1st lot of an entirety.

265A
50 HP Electric Motor
This was on vertical edger. Located at: 2697 Lawrence 1177, Miller, MO 65707.

263
2012, 2 HB Meadows #3 Carriage
With cab and all controls and 60' of track. Mellott #5 Log Turner. Extra log catch above HB. Double dogs per HB. Computerized setworks. Located at: 2697 Lawrence 1177, Miller, MO 65707.

264
Self Contained Hydraulic Unit
Located at: 2697 Lawrence 1177, Miller, MO 65707.

265
Cedar Creek Vertical Edger
3 blade. With 2 lasers and 50 HP electric motor. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266
Corinth Husk With Laser
With laser that is currently mounted on vertical edger. 56" blade. Offbear belt to 8' of rolls. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266A
125 HP Electric Motor
With electric soft start. This was on the husk. Located at: 2697 Lawrence 1177, Miller, MO 65707.

267
Tyrone Berry Feed
240. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707.

268
Entirety Lot 262 - 267
With a 10% raise. Located at: 2697 Lawrence 1177, Miller, MO 65707.

269
Refurbished Lincoln 150 HP Electric Motor
This was on the mill that just sold. Located at: 2697 Lawrence 1177, Miller, MO 65707.

270
Phelps 24" Blower
Model: 25-K. 13" inlet. 7 1/4 X 9 1/2 outlet. Line shaft ready. Located at: 2697 Lawrence 1177, Miller, MO 65707.

271
Plywood Saw
Radial arm saw. Infeed and outfeed with scissor lift. Electric drive. Good condition.

272
Pendu Blower
26". 10" inlet. 8" outlet. Good working condition.

273
Chain Type Log Turner
36". Hydraulic.

274
Tyrone Berry Carriage Drive
Model: SMA-213. SN: A1778. Good condition.

275
60 Gallon Hydraulic Tank
With about 20 gallons of hydraulic oil in it.

276
Frick Husk
With 1 - 56" and 1 - 52" inserted tooth blade. Line shaft ready.

277
AirTeck Air Dryer

278
Hydraulic Tank

279
Tyrone SMA-524 Berry Feed
Carriage drive was used on handset Frick sawmill. Complete with pump, motor, and controls.

280
Radiator

281
Radiator

282
Airlock

283
Electric Motor 15 HP
3 phase.

284
Skid of Misc Electric Motors
Large electric motor is a 25 HP 3 phase.

285
Electric Controls
12V pump sells seperate.

286
Air Conditioner

287
Spiral Roll Case
8 3/4" rolls x 54" wide x 17' long. Electric drive. Excellent condition.

288
Wood-Mizer LT70 Portable Band Mill
55 HP Yanmar diesel. Approx. 14,000 hours on the mill and 7,000 hours on the diesel. Like new band wheels and lots of new parts. Hydraulic feed. Carriage drive needs stand-a-lone hydraulic unit. Good working condition.

292
Corley Shotgun Feed
2004. SMA280C. Motor Model: 01504FLF4UMQ. With 150 HP Toshiba motor. Motor SN: 0402103511. Includes controls. Ready to load.

289
Frick Circular Sawmill
Handset, 4 HB carriage ,track & frame, belt feed, Half moon log turner in framework. Production ready.

290
Early 1990 Rayco Pro Pallet Nailer
SN: 90001. Model: SBPM-3. Stanley Bostitch Nailers. Paint approx. 80%. 3 phase 480 Volts. Up to 64" capacity. 3 stringer. Was working. Hasn't been used for a year or so.

291
Corley 48" LP Carriage
16'x 48". 3 HB. Lineal positioning. Includes 2004 Lewis Control Ready Scan 1 system with Dyna Vision heads, cab, track, frame, and controls. Ready to load.

291A
Corley Bar Turner *
Approx 40". Good condition.

291B
Cornell 2 Saw Trimmer *
SN: STDB-357. Updated electrical. Electric drive. Very good condition.

291C
Roll case *
Also has drive chains for unscrambler. 24" wide x 15' long. Buyer has first choice on unscrambler.

291D
VFD Allen Bradley *
Powerflex 523. 10 HP. Like brand new.

291E
VFD Teco Westinghouse *
Model E-510. 2 HP. Excellent condition.

291F
100 HP Electric Motor *
3 Phase. Good condition.

291G
3 Electrical Boxes *
1 is a 200 Amp disconnect.

293
Montgomery Hog 45" *
Model: 45-CS-KC. SN: 1823. Top infeed. Bottom Discharge. 150 HP electric motor. Top feed chute is 8' tall. Needs new teeth but otherwise in excellent condition. First lot of an entirety.

293A
Mellott Feed Hopper for Stingy Material *
Includes flails on front end. 5' wide x 14' long. Electric drive. Excellent condition.

293B
Mellott 3' x 11' Belt Conveyor *
Electric drive. Approx. 10" sides. Excellent condition.

293C
Mellott Incline Belt Conveyor *
3' x 25'. Electric drive. Does not include the metal detector. Concave style. Heavy duty. Excellent condition.

512
Case W14 Wheel Loader
PIN: 9129285. Hours unknown. Includes forks. Brakes do not work. Has a few hydraulic leaks. Otherwise in good working condition.

293D
MDI Metal Detector *
5' fiberglass section. Includes controls. Excellent condition.

293E
Mellott 5 HP Hydraulic Unit *
Excellent condition.

293F
Mellott Incline Belt Conveyor *
3' x 47' overall. 8' is flat then goes on incline. Electric S drive. Was used under Montgomery hog. Heavy duty. Excellent condition.

294
Entirety lot of 293 - 293F - Complete System for Regrinding Bark *
With a 10% raise.

295
Skate Rolls *
64" x 10' x 28" high

296
64" McDonald Bandwheel for Headrig *
9 1/4" face

297
Covered Waste Conveyor *
26" x 32', 13" paddle chain, 10" sides, hydraulic drive

298
Tailing Belt *
5" x 27', needs belt (4")

299
Air Powered Lift Arms *
2' x 11' 2", was used to lift boards from rollcase up onto edger

299A
Belt Conveyor *

300
Belt Conveyor *
16" x 91", no drive, 10" cleated belt

301
2 Strand Transfer Deck *
24" x 69"

302
Skate Rolls *
12"-24" wide x 8'-10' long, 5 sections

303
Tailing Belt *
6 1/2" x 88", 5" belt, hydraulic drive

304
Hytrol 180 degree Conveyor *
Serial # 573934, 94" x 124" overall, 18" conveyor belt, 30" adjustable legs

305
50" 3 Blade Edger *
20" blades, no drive, rough condition, 2 moveable blades

306
J.A. Vance 42" Edger *
No drive

307
Whirlwind 18" Dust Blower *
8" inlet, no drive, brand new

308
4 Strand Unscrambler *
10' x 10' x 6' high, no drive

309
32" Exhaust Fan *
14" inlet, electric drive

309A
32" Exhaust Fan *
14" inlet, electric drive

309B
32" Exhaust Fan *
14" inlet, electric drive

309C
32" Exhaust Fan *
14" inlet, electric drive

310
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310A
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310B
24" Exhaust Fan *
8" x 15" square inlet, electric drive

311
Baghouse *
54" x 72" x 15' tall

312
Steel Dust Pipe *
18" x 20', 6 bolt-together sections

313
Dust Pipe *
22" x 5', 12 sections

314
Dust Pipe *
28" x approx. 200', 2- 90 degree elbows

315
5 HP Hydraulic Pack *

316
3 HP Hydraulic Pack *

317
3 HP Hydraulic Pack *

318
7 1/2 HP Hydraulic Pack *

319
7 1/2 HP Hydraulic Pack *

320
7 1/2 HP Hydraulic Pack *

321
Hydraulic Pack *

322
20" Blower *
Electric drive

323
24" Blower *
10" inlet, 30 HP electric motor

324
32" NYB Blower *

325
24" Blower *
16" inlet, no drive

326
36" Blower *
16" inlet, no drive

327
36" Blower *
12" inlet, 30 HP electric motor

328
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

329
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

330
Hourglass Rollcase *
30" x 40', 12" x 22 1/2" rolls, 30" roll spacing

331
Salem Bar Turner *

332
36" Sanborn Bandmill *
# 85-01-53, 6" band, needs to be gone through

333
Jeffery Hog *
Model 54WB, serial # 14213, no drive

334
24" Cornell Blower *
10" inlet, no drive

335
36" Blower *
14" inlet, no drive

336
60" Blower *
41" inlet, no drive

337
24" Cornell Dust Blower *
10" inlet, electric drive

338
36" Blower *
28" inlet, no drive or shaft

339
Airlock *
Electric drive

340
20" Airlock *

341
Brewer 4 Strand Transfer Deck *
10' 6" x 19' x 40" high, air popups

342
Over the Wheel Tracks for Skid steer *
For 10.5 tire

343
40" Mellott Chain Turner *

344
Electric Motor *

345
Waechter 3 Head Resaw with Return *
Model 24, serial # 2021, center head is the only one currently operable, compatible with Wood-Mizer parts

346
40 HP Hydraulic Pack *

347
Schutte Buffalo Hammer Mill *
Model 1320, serial # 04-04-076

348
Steel I-Beams *
12" x 16' x 9' 6", 2 pieces

349
4 Strand Transfer Deck *
12' x 13' 4" x 32" high, electric drive, roof top chain

350
Blo-Hog *

351
Rotating Table *
48" x 56", electric drive

352
Amerimulch Coloring Machine *
Electric drive

353
Hard Maple Burl Log *
Approx 9' long, 15" log diameter, and 55" burl diameter.

354
48" Dust Blower Completely Rebuilt *
22.5" Inlet Diameter. 20" Outlet (Square). Completely rebuilt! No power.

355
HMC 4 HB Carriage *
Model: AC44. SN: SC44-117. Air over air setworks. Some spare parts.

356
Band Pallet Dismantler *
60" capacity. Electric drive. 10 HP 3 phase. Good condition.

357
Crown Pallet Jack *
24 V battery drive. Good working condition.

357A
Crown Pallet Jack *
24 V battery drive. Good working condition.

357B
Crown Pallet Jack *
24 V battery drive. Good working condition.

358
6 Strand Transfer Deck *
9 1/2' wide x 14' long. C55 rooftop chain. Very good condition.

359
3 Strand Transfer Deck *
7' x 15'. C55 roof top chain. Electric drive. Good condition.

360
Dust Cyclone *
44" diameter. 8' tall. 3 - 8" inlets. Stainless steel. Excellent condition.

361
6 Semi Tires *
5 have rims.

362
55 Gallon Steel Barrels *
2 per lot.

362A
55 Gallon Steel Barrels *
2 per lot.

362B
55 Gallon Steel Barrels *
2 per lot.

362C
55 Gallon Steel Barrels *
2 per lot.

362D
55 Gallon Steel Barrels *
2 per lot.

363
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363A
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363B
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363C
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363D
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363E
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363F
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363G
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363H
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363I
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363J
Plastic 250 Gallon Tote *
1 per lot. Good condition.

364
Waste Conveyor *
On incline except 3' flat. 36" wide x 15' long overall. Paddle style. Hydraulic drive. Good condition.

365
Skid of Hydraulic Hoses and V Belts *

366
2 Air Impacts *
with some sockets. Working condition.

367
12 Volt Heater *
Good condition.

368
Automatic Propane Scales *
For 20 LB cylinders.

369
5 Skids of H-78 Chain *
With 3 drive sprockets. Several hundred feet.

370
Portable 230 Air Compressor *
Engine needs to be rebuilt but compressor works good.

371
Iveco C13 Diesel *
49873. TIPO: C13ENTD20.00A800. Around 17,000 hours. With extra filters, controls and wiring. Good working condition.

372
Dyna Products Vertical Sizer *
No cutter head. Hydraulic drive. Good working condition.

373
Oil Cooler *
24" x 24". Hydraulic driver for fan.

374
Quincy Model 240 Air Compressor *
Size: 4x3. Working condition.

375
Barn Sweep Chain *
Cornell style. 17" paddles. 50' long. Good condition.

376
Barn Sweep Chain *
Cornell style. 11" paddles. 2 sections. 70' total.

377
Ladder Back Chain *
25' long approx 12" wide.

378
Catwalk with Railing *
30" wide x 22' long. Very good condition.

379
Skid of 90's and 45's for 8" Diameter Dust Pipe *
PVC

380
Steel Lumber Cart *

381
Skid of Hyd Flow Controls, Pulleys, and Sprockets *

382
2 Pulleys *
10 groove 16" diameter for D belt. Hub is 2 7/8" shaft.

383
West Salem Grinder *
52" Wide. 100 HP electric motor. Includes Vibrating conveyor. 52" W x 17' L. Electric drive on the vib. conveyor as well. Includes electrical panel. Overall in good condition.

384
48" Dust Blower *
16" inlet. Electric drive. Needs belts. Good condition.

385
Shavings Bagger *
3 bay bagger. Includes hydraulic unit. Good condition.

386
2 Skids of Rollers *
Approx. 6 1/2" diameter x 7' long. Excellent condition.

387
Skid of Rollers *
Approx. 8" diameter x  7' long. Good condition.

388
Debarker with Barn Sweep *
Was ready to run but has sat for a few years.

389
JD 6068 Diesel Power Unit *
Radiator. New alternator. Changed oil. New battery. Clutch. C groove pulley. New Murphy shutdown controls and wiring in 2021. Runs good. Unknown hours but thinks maybe around 10,000. Uses no oil.

389A
Hydraulic Reservoir *
Approx. 450 gallon capacity. 1/3 full of hyd oil.

389B
Hydraulic pump *
15 GPM & 10 GPM. Needs new shaft.

390
Meadows Edger *
36" wide. Power Horse 420CC gas engine. Good for 1"-2" with current engine. Capability up to 4" with bigger engine. Current engine is a little small.

391
Fast Trac Portable Bandmill *
Takes 4 1/2 to 6 inches wide bands. All motors are on it. Comes with the cab, log turner, and an outfeed belt.

392
Belt Conveyor *
24" wide x 12' long. Electric drive. Good condition.

393
Cornell Cutoff Saw *
24" blade. 28' infeed and outfeed. Electric drive. Working condition.

394
3 Head Trim Saw *
16" blades. Electric drive with lasers. 12' capacity.

395
Self Dumping Hopper *
Vestil. 4' x 4' x 2'. 2000 lb capacity.

396
Rack of Various Conveyor Belts *
All brand new.

397
Wooden Lumber Cart *

398
Belt Conveyor *
4' x 17'. Electric drive.

399
Belt Conveyor *
53" wide x 16' long. Electric drive.

400
9 Step Stairs *
3' wide x 6' high. 10'6" long.

401
Pallet Chief IIII *
With stacker. Good working condition.

402
21" x 30' Auger *
Electric drive.

403
CompAir Air Compressor *
Hydro vane. 6645 hours. Excellent condition.

404
Dust Filter System *

405
Air Tank *
Approx. 80 gallon capacity.

406
Shock Absorption Roller *

407
Baker 2 Head Resaw *
Electric drive. Good condition. Has been sitting for a year.

408
Morgan Scragg Mill *
Hydraulic power pack included. Inserted tooth blades. Electric drive. Good working condition.

409
Brewer Gang Saw *
SN: 111988. Model: BR_2487. Single arbor. Infeed rolls. Pallet of new blades, spacers, and some parts. Electric drive. 100 HP electric motor and a few smaller ones included. Good working condition.

410
Georgetown Pallet Jack *
5500 LB. Capacity. Brand new rebuild kit. Works like new.

411
Miller CP-250TS Welder *
Comes with whip, ground, and gas line. No tank. Good working condition.

412
Log Turner *
Needs work.

413
Chop Saw *
With 10' infeed. 4' outfeed. 4 air stops. Hydraulic powered, includes hydraulic pump. FIRST LOT OF AN ENTIRETY.

414
Pendu 5000 Gang Saw *
Lineshaft ready. Has 188 HP Duetz power unit. Includes two 24" dust blowers and spacers.

415
140 - 10" Gang Saw Blades *

416
Unscrambler *
With infeed deck that is 2 strand x 10' long. 2 strand unscrambler has hydraulic drive.

417
Entirety of Lots 413 - 416 *
With a 10% raise.

418
38" Burlington Wide Belt Sander *
With 8 extra belts. 3 phase electric drive. Double head. good working condition.

419
4 Log Bunks *

500
1991 45' Walking Floor Chip Trailer
CPS in good working condition.   VIN: 1C9535620MP389278

501
John Deere 440C Cable Skidder
SN: 292234T. Meter reads 1312 hours but may not be accurate. John Deere engine. Good working condition.

502
John Deere 340D Cable Skidder
SN: DW340DA502149. Meter reads 9979 hours. 83" blade. Good working condition. Winch cover is missing. May have a hydraulic leak but can't see where.

503
Skidder Tire Chains
Bear claw. Enough for 2 tires. Very good condition.

504
Brand New Tires
Nylon tubeless 24 Ply rating. 20.5-25. L-3/E-3. DL-3. 20 PLX. Set of 2

505
Trailer Hitch Receiver Attachment
Brand new. Skid steer attachment.

506
Utility Service Trailer
No brakes. Good title. MVIN: 372854 IND. As is. Everything was still working when he quick using it. All tools pictured come with it. Quincy air compressor with Honda engine.

507
Lane 2408 Tub Grinder
JD 6068 Power unit. Model: 6068TF275D.E.H. SN: PEG6068T431721. 1568 hours from new. Electronic controlled. 11' concave outfeed belt. Jacks and belts are hydraulic. Has a remote but the remote does not work. Could possibly be repaired. One sweet machine!

508
Lane LSC-35 Concave Belt Conveyor
30" x 35'. Honda engine powers hydraulics. Hydraulic lift, drive on belt, and jacks. Approx. 1000 hours from new. Lights.

509
Morbark 950 Tub Grinder
Model: 950. SN: 555-025. Freshly painted. Extra screens. JD model T06068TF150 diesel. 6.8 L. 170 HP @ 2500 RPM. Meter showing 1960 hours.

510
Axels for 19.5 Tires.
This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

511
Bunton 52" Lawnmower
Vanguard 20 HP motor. Works good.

513
1981 Cat 518 Cable Skidder
Machine SN: 50S03196. Rebuilt 3304 engine SN: 78P5614. Rebuilt torque converter. New transmission pump. Center pins and bushings are worn a little but are still useable. Winch was worked on but needs slight adjustment and does not freewheel. No tire leaks. Unknown hours. Extra winch that is included fits this machine but it does have some parts missing. This Lot is located at 5141 Produce Rd, Port Trevorton, PA 17864.

514
Set of Diamond Tire Chains
Set of tire chains for 28-l double diamonds. Used very little. Tires are bad.

515
Delimber CTR 314
For landing loader.

516
Sellick SD-80 Forklift
Diesel. Works and operates well. Hour meter is not accurate.

517
John Deere 644B Wheel Loader
Runs and operates. Just got out of the shop to replace rear axle. Works very well.

518
Swinger Wheel Loader
200-2079 LT 5000. Perkins engine. Foam filled tires. New battery. Weights for the back. 5060 hours. Just went through it. A good solid machine.

519
1992 Freightliner FLD112 Truck, VIN # 1FUY3ECB7NP522751
Year: 1992
Make: Freightliner
Model: FLD112
Vehicle Type: Truck
Mileage:
Plate:
Body Type: Highway
Trim Level:
Drive Line: 6x4
Engine Type: Cat L6, 10.3L (629 CID)
Fuel Type: Diesel
Horsepower: 276-335HP
Transmission: 9 speed
VIN #: 1FUY3ECB7NP522751

Features and Notes: Clear title. Needs a new tire. DOT compliant. Operates very good. Mileage may not be accurate.

520
Prentice Grapple *

521
Brand New Light Duty Log Hauler *
For firewood logs.

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Showcase Equipment Consignment Auction – Sawmill and Forestry Equipment
 Live Auction
 
Sale Date(s)
Thursday Nov 11, 2021 Completed
Friday Nov 12, 2021 Completed
Sale Location

Middlebury, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Consignments Wanted including but not limited to: Sawmill, Pallet Shop, Industrial Woodworking, Metalworking, Skidders, Loaders, Dozers, Lifts, Forklifts, Skid Loaders, Tractors, Etc.
Absolute! No Minimums, No Reserves!

Booth space available for Vendors!

Call or email Darrin at 574.536.1646 (db@showcaseequipment.us) for booths or to consign.

Sales tax is charge unless valid exemption is filed.

00
Information lot *
This auction will begin at 9 AM. We will sell in catalog order. A 7% sales tax will be charged on all purchases unless you have a valid exemption. All equipment is ready to load. Free loadout will be available the day of the auction and the 2 weeks following the auction. After 2 weeks, loadout will be by appointment and for a fee. For loadout questions call 260.585.2388.

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

099
1/25 Scale Wood-Mizer LT40 Portable
Super hydraulic sawmill. Die Cast. Head moves up and down and along track. Cute little model!

099A
1/32 Scale Tigercat 234B Knuckleboom
Model, Die-Cast Knuckleboom Loader

100
Construction Machinery Table Saw
Model: K. SN: 7429. 3 phase 5 HP electric motor. 16" Blade.

101
Industrial Radial Saw
Model: 02319 CRAFTSMAN. SN: 81460081. 208-240/480 Volts. 12" blade.

102
Monarch Uni-Point Saw
SN: 48 483. 220/440 Volts. 5 HP motor. 14" Blade.

103
Morgan Band Scragg Mill
2 stationary heads @ 3 1/2". 6" to 14" log capacity. 11' infeed chain. 1 1/4" bands. Hydraulic feed. Line shaft ready. Went through and reinforced in some areas. Good working condition. The reason I am selling is I have too many big logs for this machine.

104
Morbark Double End Trim Saw
Trim saw for a post peeling operation.

105
Log Trough
22" wide x 20' long. 6 1/2" wide chain. Hydraulic drive. Very good condition.

106
Stenner Single Head Resaw
Model: MH59. 12" x12" capacity. 36" band wheels. 4" band. No drive. Includes infeed and outfeed.

107
Stringer Reclaim Saw
5 1/2" capacity. Was used to reclaim stringers. Electric drive. Good condition.

108
Sullair Screw Compressor
Model 20-150L. 150 HP electric motor. Good condition.

109
International UV549 Natural Gas Genset
750 hours. Onan Generator. 3 phase. 220 Volts. 75 KW.

110
Scragg Mill
4" or 6" cants. No power

111
Miner Edger
6" capacity, needs blades and parts for movable blade.

112
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112A
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

112B
Hydraulic Unit
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

114
Cornell Slab Saw
Model: SHL. SN: 387-177. 31" blade. Electric drive. 10' Belt conveyor included but no belt.

115
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center.  Powered rollers. BRAND NEW!! Never installed.

115A
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115B
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed.

115C
Lift Table with Rolls
22" x 82" range. 4 1/2" x 85" rolls 11" on center. Powered rollers. BRAND NEW!! Never installed. SOME BEARINGS ARE BROKEN LOOSE FROM THE FRAME.

116
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116A
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

116B
Lift Table
22" x 82" range. 48" x 95" platform. BRAND NEW!! Never installed.

117
Scissor Lift Lift Table
70" x 94" table. 30,000 lbs capacity. Electric powered. Good condition.

118
Robinson Vertical Resaw
3" upright band head. 36" band wheels. No power. Bare machine.

119
Timesavers 3 Head Sander
1988. Model 852-5CB. SN: 19340. 52" wide capacity. 25 HP electric motors on heads. Complete and ready to be installed.

120
Prescott Band Headrig
6'. Weight strain. Runs 12" blades.

120A
Weg 200 HP Electric Motor
890 RPM's. 460V. 3 Phase.

121
Filer and Stowell Band Head Rig
7'

121A
Teco 200 HP Electric Motor
890 RPM's. 3 Phase. 480 Volts.

122
Fulghum 60" Chipper
6 knife. Top discharge. 75 HP electric motor. Working condition.

123
Morbark Hour Glass Rollcase
40'. Electric drive. Hyd powered kickers. Good condition.

124
Corley Gang Edger
6" gang edger combo. Laser. 2 movable blades with hydraulics. Electric drive. All controls.

125
Unscrambler
4 strand. Hydraulic drive. 8' wide x 30" long

126
Salem Log Trough
30' long. Electric drive. 120 ladder back chain. Heavy duty built and in excellent condition.

127
Progress Unscrambler
3 strand. 10' wide. Electric drive. Very good condition. Overall dimensions 11' 9" wide x 8' 10" high.

129
Tilt Hoist *
SN: 285. Electric drive. Includes hydraulic unit.

128
Crosby Trim Saw
Model: 6225 iv. Size 4 8 saw. With 3 phase electric motor. Very easy to switch to line shaft. Very good condition.

130
Waste Conveyor
18" x 53' long. Electric drive. Ladder back chain. Good condition.

131
Trim Saw
8 saw. Drop blade grade trim saw. Will pass an 18' board. Electric drive, 6" thick capacity. Good working condition.

132
Belt Conveyor
54" wide x 45' long. Like new cleated belting. Electric gear box drive. Enclosed belt return. Good condition.

133
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition.

134
Mellott Transfer Deck
4 strand. 11' 6'' wide x 10' long. With stops. Electric drive. Good condition.

135
Log Trough
15' long. Dual H-78 chains. Gear reduction drive.

136
Green Chain
4 strand. 12' x 70'. Heavy duty built. Electric drive. Good condition.

137
Green Chain
4 Strand. 149' long. Like new H-78 chain. 3 phase electric motor and gear box drive.

138
Green Chain
3 strand. 21' long. 2 strand rooftop, 1 strand H-78 chain. Electric drive. Very good condition.

139
Waukesha Power Unit
SN: 360536. Model: VRG232U. Spec: G-41138. With Twin Disc clutch.

140
Dewalt Radial Arm Saw
Model: 35020. 20" Blade. Electric drive.

141
Lift Table
4' x 6'. Electric lift.

142
Hercules Industries Man Cage
36" square. Model: KI-161. SN: 62311. 500 pound capacity.

143
4 Arm Kickers
149" center of bearings.

144
Roll case
16" x 57" dead rolls. 36" high. 2" rolls.

145
GoFast Deduster
All hydraulic. Needs work.

146
Profile Cutter
Setup to cut profiles with dadoes on ends.

147
Roll Case With Fork Slots
16" x 111" per section or roll case. Center section is live. 90" x 111" overall.

148
Single End Trim Saw
Electric drive.

149
Custom Built Wide Cut Slab Mill
Similar to  TruCut. 2" bands. 60" capacity. Fully hydraulic. Hyd band tensioner and guides. Self contained. 70 HP John Deere diesel. 1424 hours on engine and approx 600 hours on the mill.

150
Cat 250 KW Genset

Cat 3306B diesel SN: 85Z04348. 23,710 hours. Was rebuilt at 12,000 hours. Generator is a 3 phase 480V. Great running unit.


151
2013 Wood-Mizer LT70 Portable Sawmill
30 HP 460V Electric motor. 5898 hours. Distributed control system. Debarker. Log loader. Cant flipper. Log turner. Loaded. 10 new bands. Trailer package included but not installed. VIN: 456D72419DNBB5906.

152
Montgomery Blo Hog
26". Top feed. Some new anvils. New gate. Blower has little wear but still in excellent condition. Comes with a hopper.

153
Sawdust Cyclone
2 intakes, 12 x 22 and 10 x 22. 24 in. round collar on one. 12" round outlet. 12' long x 4' diameter overall.

154
Phelps 24" Blower
No. 25-K. 12" round inlet. 9" outlet. Line shaft ready.

155
Meadows #1 Portable Circle Mill
3 HB carriage with 2 dogs. No wheels on axles. All manual. 50" blade with inserted carbide teeth. Lot # 155C ran this mill.

155A
50" Blade
With inserted carbide teeth.

155B
50" Blade
With inserted carbide teeth.

155C
Cummins 4 Cyl Power Unit
110 HP.  1833 hours. Mfg date 5/28/14. SN: 60130539. PEC Mfg. clutch. Model: C01113AZ. SN: SH11003. Muffler included. Murphy controls. Runs excellent. This unit was used on Lot# 155.

155D
Lincoln 75 HP Electric Motor
230/460 volts. 1775 RPMs. 365T frame. 3 phase. SN: 2735408. Was on Lot# 155. As is.

156
Roll case with Fork Pockets
5" x 82" rolls. 75" x 91" overall. Good condition.

156A
Roll case
5" x 82" rolls. 75" x 91" overall. Electric drive.

157
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

157A
Lift table with Rolls
46 x 114 overall. 5" x 43" rolls. Hydraulic lift. Electric drive.

158
SCMI 36" Sander
Sandya Uno. Model: Uno CS. SN: AE009339. Electric. 230/460 Volts. Feed belt still in good condition.

159
36" Sander
New drive roller in 1997. Feed belt is worn a little. Air drive. Electric drive on feed belt.

160
2 Pulleys
20 1/2" 8-groove pulley with a 4 7/16" collar. 8 1/2" 4-groove pulley with a 2 1/4" collar.

161
Cummins Power Unit
300 HP. Model: NTC335. 8414 hours. SN: 10318132. CPL 174. Twin disc clutch. Model: SP214P1 SN: 141268. New guts in clutch. Fires right up. Good condition.

162
Log Deck
2 strand. 7' x 23'. H78 chain. Speed reduction gear drive. Excellent condition.

163
Cat D333A Power Unit
6 cyl. 165 HP. SN: 87B572. 5290 hours. Cat Twin Disc clutch spec: 30365. Hasn't been started for 2 years. Was working good when taken out of production.

164
3 Sections Dead Rolls
(1) 23" x 113". (1) 23" x 73". (1) 18" x 112".

165
Frick Portable Circle Mill
2 HB carriage. Pipers Saw Shop headblocks. Manual. Air dogs. Hydraulic on newer mandrill and carriage drive. 52" inserted tooth blade. 5 groove pulley. 24.6-1 air motor. 33.8T01 air motor. 2 extra carriage wheels. Brand new hydraulic valve bank.

166
Iron Bull Self Dumping Hopper
10' x 66". 7000 lb capacity.

167
Cornell 6x36 Edger
SN: HE289672. 2 moveable blades. 10' infeed. 25 HP Electric motor. Could easily be switched to line shaft. 110V Lumberline lasers with Meadows measurement dial. 10 extra blades sharpened and ready to go. Very good condition.

168
Belt Conveyor
30" x 15'. Electric drive. Very good condition.

169
Edmiston 4 Blade Edger
SN: HE372E16. Mfg Date: 10/03/03. 4" x 36" capacity. 2 moveable (1 is warped) and 2 stationary inserted tooth blades. Hydraulic drive. Very good condition. 169A was used to run it.

169A
Cummins 4 Cyl Power Unit
110 HP. 2900 hours. Mfg date 4/21/04. SN: 30674268. WPT clutch with ball bearing kit installed recently. SN: W13057806010. Model: WTD-11-130. Runs excellent.

170
international A175 Power Unit
175 HP. 1996. With a clutch. Anti-Freeze line is broke when loading but ran before it broke. Starts very easily.

171
2021 EZ Boardwalk M40 Portable Sawmill
Upgraded IGX 700 Honda engine. 40" diameter x 16' 6" log capacity. 34" slab width. Only 11 hours!! Demo unit.

172
Jones Saw Grinder
Model 7A. SN: 75052A. Very good condition.

173
Roll Case with Popup Cross Transfer
25" x 15' roll case with a 4 strand 8' x 8' air powered popup transfer.

174
Newman 40 HP Electric Motor
3 phase. 1800 RPMs. 208/220/440 volts. As is.

175
Dead rolls
2 1/2" x 16" x 12' dead rolls

176
Phelps 40" Dust Blower
Model: 45HV-1. SN: 22997. 1900 max RPM. Good condition.

177
All the dust piping in pictures
(1) 14" x 23'5". (1) 14" x 39'2". (1) 14" x 7'4". (1) 14" x 32'. (2) 12" x 39'2". Comes with all the elbows, etc. as pictured.

178
Cooks Cat Claw Sharpener
Line shaft ready. Suffolk dual tooth setter.

179
Rotobek Grapple
Continuous rotation. Model: 4552HD-A-BF3-CB6-1. SN: 70003499R0-739602.

180
Worldwide 25 HP Electric Motor
1770 RPMs. 230/460 volt. 284T frame.

181
250 Gallon Fuel Tank
Still has some fuel. Has a hole 16" from the bottom.

182
Kohler 449 KW Genset
New Intelilite MRS19 control system 565 hours ago. New cam shaft. Approx. 10,000 - 11,000 hours. Model: D40012.1A65. New fuel filters. Starts right up and works excellent. Good clean machine.

184
John Deere 47 KW Genset
Model: 4039DF001. Serial: T04039D401471. Unknown hours. Exciter part is bad in generator. Diesel starts right up and run good.

185
Kohler Power System Enclosure
86" x 176". Sound attenuated. Was used with Lot # 182.

186
Steel Steps
25" wide x 44" high.

187
4 Strand Log Deck
Has C55D rooftop chain. Electric drive with Iron Man gear box. 11' wide x 12' long. Excellent condition.

188
43" x 11' Cyclone
11" round inlet. 10" outlet.

189
48" x 9'6" Cyclone
10" and 12" inlets. 11" outlet with airlock.

190
30" x 7' Cyclone
10" and 11" inlets. 10" outlet.

191
30" x 41" x 9'7" Belt Conveyor
Convey Ability. 110V electric motor with gear reduction drive.

192
50" x 7' Lumber Cart
With all swivel casters.

193
Various belting and conveyor parts

194
Cat Walk with Steps

195
Swinging All Manual Chopsaw
Electric drive. 18" blade. 4 stops. 15' infeed. 8' outfeed. Just out of production.

196
Precision 66" Chipper
Model: 66.18. SN: C.2944. 6 Knife. Just out of production.

197
Baker Edger
Model: BE-O. SN: 07-303. 20 HP electric motor per blade. Split arbor. Inserted tooth blades. Hydraulic infeed and outfeed. Just out of production.

197A
15 HP Hydraulic Unit
Barker Products. Model: BP-15-60-PUR1520B15. SN: 91.99.

198
York Furnace and Air Conditioner

199
Steam Valves

200
Frick Husk
No blade. Hydraulic drive.

201
Mellott Belt Conveyor
24" x 74'. No drive.

202
13' Barnsweep
The bottom has holes.

203
Chip Master 48" Chipper
6 knife. Very good condition. SN: 66262.

203A
100 HP Electric Motor
440V. 3 phase. On the frame that was with Lot 203.

203B
Chip Cyclone
13" inlet. 15" outlet. This one was on Lot 203.

204
30" x 22' Live Roll Case
9" rolls.

205
Husk
No blades.

206
Spiral Roll Case
2' x 9'.

207
Simonds Band Tensioner
Model: 930. SN 97930105. Type: SMO 930. 875 hours. Very good condition. Electric.

208
New Stake Pointer
Cutter head is missing. 10 HP electric.

209
McDonough Guide Dresser
SN: BDM-850. 3/4 HP 110V. Completely gone through. Very good condition.

210
MOAR Upright Band Saw
SN: 7988. 10 HP 208/220/440 V Electric.

211
Brewco B1600 Runaround Only
Completely gone through. Sandblasted and painted. Transfer chains only. No drive chains nor motors. 1st of an entirety.

211A
Brewco B1600 Resaw
Completely rebuilt. Brand new air set works. Line shaft ready. In new condition.

211B
Entirety Lot 211 - 211A
With a 10% raise.

212
Desiccant Air Dryer
Airteck TP3001-C. Will dry for a decent sized sawmill.

213
Salem Headrig
6' weight strain. SN: 45681R72. Slatbed offbearing belt. Has a shaft to bearing issue that should be an easy fix.

214
Globe Vibratory Finisher
SN: 216-7. Model: SV-3.

215
Morgan Scragg ill
What you see is what you get. Needs more parts before it's ready for production. SN: 042390050. This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

216
Newman KF-24 Ripsaw
100 HP 3 phase electric. Needs new belt, saws, and spacers. Ready to go otherwise as far as we know.

217
Mater 4 HB Carriage
19' carriage. All hydraulic except the dogs are air. Panagraph arm and Helle hydraulic carriage feed but no husk. 60' of track. Was in production spring of 2021. Has owners manuals.

217A
DY Turbo Turners
110V over air. New about 3 years ago. Still in excellent condition. Has owners manuals.

218
Echo CS-800P Chainsaw
24" Oregon bar. Runs very good.

219
15" x 10' Dead Rolls

220
Pallet Chief Pallet Nailer and Stacker
110V over air. 3 stringer. With some updated Woodpecker parts. Includes pallet stacker, nailers, and some extra parts. Good condition.

221
5 Strand Incline Transfer Deck
13' incline. 7' Flat. Not over width for trucking.

222
5 Strand All Incline Transfer Deck
11'6" wide x approx. 18' long. Electric drive with gear box. Has stops. Not over width for trucking.

223
Baker Runaround Resaw
1 1/4" band resaw. Mechanical head with shop built runaround. Line shaft ready. Was in working condition when removed. Model: BBR-O. SN: 93-514.

224
5 Strand Log Deck
Rooftop C55B chain. 36' long.

225
4400 LB Pallet Jack
does not go up and down.

226
2016 Baker 3665D Portable Band Mill
Cummins 65 HP diesel. 1400 hours. Computer setworks. New gauges. 7 - new 2" bands. Has 1 1/2" band wheels included to be swapped out if wanted. Has owners manuals. Has lights and brakes. Was operating 3 weeks before the auction.

227
36" Blower
With 20 HP electric motor. Rough condition.

228
20" Blower
No drive. Fan is worn quite a bit.

229
Cornell Edger Infeed
45" wide x 6' long x 31" high.

230
Baker Lateral Conveyor
Model: BLC-O. SN: 93-051. 1 HP 3 phase electric drive.

231
Hytrol Turn Rolls
18" rolls x 55" long x 39" high. 3/4 HP Electric drive.

232
XenoRol Dead Rolls
16" wide x 30' long. Used to be live rolls.

233
XenoRol Turn Rolls
16" wide x 10' long.

234
Dead Rolls
22" x 3' long x 40" high.

235
54" Dead Rolls
10' long x 7' high. Heavy duty.

236
39" Dead Rolls
5 sections 10' long x 7' high.

237
Bennett - Rireland Buzz Saw
Model: J-55-28.

238
Hytrol Roll Case
Light duty. 17" rolls. With 2 popup transfers. 2 HP electric drive. 13' long x 40" high. Good condition.

238A
Hytrol Roll Case
16" rolls. Light Duty with 2 popup transfers. 13' 6" long. 1/2 HP Electric drive. 40" high.

239
18" Blower
With 5 HP electric motor. Fan paddle is bent.

240
Phelps 20" Blower
Model: 25-K. Electric drive. Unkown HP.

241
24" Blower
No drive. Fan is worn quite a bit.

242
Drill Press
With lots of extra good bits.

243
50" Dead rolls
56" long x 14" high. Heavy duty.

244
Morbark 58" Chipper
No drive. 4 knife.

245
Portable Edger
1 moveable and 2 stationary blades. Blades spin freely. 6' infeed rolls and 5' 3" outfeed table with 2' roller extension. Needs to be rebuilt.

246
26" Dead Rolls
10' 9" long x 9 1/2" high. Looks like brand new!

247
Pendu 18" Belt Conveyor
11' long x 53" high. Hydraulic drive.

248
28" Roll Case
No drive. 5' long x 42" high. With spirals and adjustable legs.

249
22" Belt Conveyor
16' long x 49" high. With stop & load on air cylinders. No drive. Good condition.

250
Shop Built Chop Saw
7' infeed and outfeed. Air operated. 3 air stops. Line shaft ready.

251
Bucksaw
6' x 17'. Hydraulic drive. 48" bar. Working condition.

252
Tower Edger
4"x36". 2 moveable 1 stationery blade. Inserted tooth blades. Infeed and outfeed rolls. Line shaft ready.

253
JS Company Circle Mill
2 HB carriage with air dogs and brand new Frick handset. includes husk, track, frame, and drive.

254
Edmiston Circle Mill
4 HB 15' carriage with hydraulic dogs and air setworks. Cab, 56' track, and husk with top saw.

255
5.9 Cummins Power Unit
190 HP. Murphy controls. Runs excellent. Very similar to the one pictured. Actual photo coming soon.

255A
Cummins 220 HP Power Unit *
Model: NH220. Very low hours. Starts and runs perfect.

255B
John Deere 6404T Power Unit *
Hours are unknown. 145 HP. Rebuilt radiator. New water pump, rear seal, gauges, and turbo. 1 year old clutch. Ready to go.

256
John Deere 4039 Power Unit
100 HP. SN: T04039T419229. Model: 4039TF001. Murphy controls. Runs excellent. 

256A
John Deere 4045 Power Unit
80 HP. 840 hours from new. New clutch. New Murphy shutdown controls. Very good condition. Runs like a top.

257
3 Cylinder Kubota Power Unit
30 HP. Model: 1402. Only 628 hours. New clutch and radiator. Murphy controls. Runs excellent.

257A
2 Cyl Kubota Power Unit *
20 HP. Good working condition.

258
Morbark Stak Track
80' track. Working condition.

259
Royal Chip Bin
With hydraulic unit. 14'x 16'. This a very nice bin. Unassembled and ready to load.

260
Hosmer Edger
Model: ED43. SN: ED4324. 7" x 36". 1 moveable 1 stationary blade. Line shaft ready. Good condition.

264
Mellott #5 Log Turner
Chain type. Located at: 2697 Lawrence 1177, Miller, MO 65707.

261
43" Chain Log Turner
Hydraulic drive.

262
2 Strand Log Deck
5' x 21'. Stop and load. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707. 1st lot of an entirety.

265A
50 HP Electric Motor
This was on vertical edger. Located at: 2697 Lawrence 1177, Miller, MO 65707.

263
2012, 2 HB Meadows #3 Carriage
With cab and all controls and 60' of track. Mellott #5 Log Turner. Extra log catch above HB. Double dogs per HB. Computerized setworks. Located at: 2697 Lawrence 1177, Miller, MO 65707.

264
Self Contained Hydraulic Unit
Located at: 2697 Lawrence 1177, Miller, MO 65707.

265
Cedar Creek Vertical Edger
3 blade. With 2 lasers and 50 HP electric motor. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266
Corinth Husk With Laser
With laser that is currently mounted on vertical edger. 56" blade. Offbear belt to 8' of rolls. Located at: 2697 Lawrence 1177, Miller, MO 65707.

266A
125 HP Electric Motor
With electric soft start. This was on the husk. Located at: 2697 Lawrence 1177, Miller, MO 65707.

267
Tyrone Berry Feed
240. Hydraulic drive. Located at: 2697 Lawrence 1177, Miller, MO 65707.

268
Entirety Lot 262 - 267
With a 10% raise. Located at: 2697 Lawrence 1177, Miller, MO 65707.

269
Refurbished Lincoln 150 HP Electric Motor
This was on the mill that just sold. Located at: 2697 Lawrence 1177, Miller, MO 65707.

270
Phelps 24" Blower
Model: 25-K. 13" inlet. 7 1/4 X 9 1/2 outlet. Line shaft ready. Located at: 2697 Lawrence 1177, Miller, MO 65707.

271
Plywood Saw
Radial arm saw. Infeed and outfeed with scissor lift. Electric drive. Good condition.

272
Pendu Blower
26". 10" inlet. 8" outlet. Good working condition.

273
Chain Type Log Turner
36". Hydraulic.

274
Tyrone Berry Carriage Drive
Model: SMA-213. SN: A1778. Good condition.

275
60 Gallon Hydraulic Tank
With about 20 gallons of hydraulic oil in it.

276
Frick Husk
With 1 - 56" and 1 - 52" inserted tooth blade. Line shaft ready.

277
AirTeck Air Dryer

278
Hydraulic Tank

279
Tyrone SMA-524 Berry Feed
Carriage drive was used on handset Frick sawmill. Complete with pump, motor, and controls.

280
Radiator

281
Radiator

282
Airlock

283
Electric Motor 15 HP
3 phase.

284
Skid of Misc Electric Motors
Large electric motor is a 25 HP 3 phase.

285
Electric Controls
12V pump sells seperate.

286
Air Conditioner

287
Spiral Roll Case
8 3/4" rolls x 54" wide x 17' long. Electric drive. Excellent condition.

288
Wood-Mizer LT70 Portable Band Mill
55 HP Yanmar diesel. Approx. 14,000 hours on the mill and 7,000 hours on the diesel. Like new band wheels and lots of new parts. Hydraulic feed. Carriage drive needs stand-a-lone hydraulic unit. Good working condition.

292
Corley Shotgun Feed
2004. SMA280C. Motor Model: 01504FLF4UMQ. With 150 HP Toshiba motor. Motor SN: 0402103511. Includes controls. Ready to load.

289
Frick Circular Sawmill
Handset, 4 HB carriage ,track & frame, belt feed, Half moon log turner in framework. Production ready.

290
Early 1990 Rayco Pro Pallet Nailer
SN: 90001. Model: SBPM-3. Stanley Bostitch Nailers. Paint approx. 80%. 3 phase 480 Volts. Up to 64" capacity. 3 stringer. Was working. Hasn't been used for a year or so.

291
Corley 48" LP Carriage
16'x 48". 3 HB. Lineal positioning. Includes 2004 Lewis Control Ready Scan 1 system with Dyna Vision heads, cab, track, frame, and controls. Ready to load.

291A
Corley Bar Turner *
Approx 40". Good condition.

291B
Cornell 2 Saw Trimmer *
SN: STDB-357. Updated electrical. Electric drive. Very good condition.

291C
Roll case *
Also has drive chains for unscrambler. 24" wide x 15' long. Buyer has first choice on unscrambler.

291D
VFD Allen Bradley *
Powerflex 523. 10 HP. Like brand new.

291E
VFD Teco Westinghouse *
Model E-510. 2 HP. Excellent condition.

291F
100 HP Electric Motor *
3 Phase. Good condition.

291G
3 Electrical Boxes *
1 is a 200 Amp disconnect.

293
Montgomery Hog 45" *
Model: 45-CS-KC. SN: 1823. Top infeed. Bottom Discharge. 150 HP electric motor. Top feed chute is 8' tall. Needs new teeth but otherwise in excellent condition. First lot of an entirety.

293A
Mellott Feed Hopper for Stingy Material *
Includes flails on front end. 5' wide x 14' long. Electric drive. Excellent condition.

293B
Mellott 3' x 11' Belt Conveyor *
Electric drive. Approx. 10" sides. Excellent condition.

293C
Mellott Incline Belt Conveyor *
3' x 25'. Electric drive. Does not include the metal detector. Concave style. Heavy duty. Excellent condition.

512
Case W14 Wheel Loader
PIN: 9129285. Hours unknown. Includes forks. Brakes do not work. Has a few hydraulic leaks. Otherwise in good working condition.

293D
MDI Metal Detector *
5' fiberglass section. Includes controls. Excellent condition.

293E
Mellott 5 HP Hydraulic Unit *
Excellent condition.

293F
Mellott Incline Belt Conveyor *
3' x 47' overall. 8' is flat then goes on incline. Electric S drive. Was used under Montgomery hog. Heavy duty. Excellent condition.

294
Entirety lot of 293 - 293F - Complete System for Regrinding Bark *
With a 10% raise.

295
Skate Rolls *
64" x 10' x 28" high

296
64" McDonald Bandwheel for Headrig *
9 1/4" face

297
Covered Waste Conveyor *
26" x 32', 13" paddle chain, 10" sides, hydraulic drive

298
Tailing Belt *
5" x 27', needs belt (4")

299
Air Powered Lift Arms *
2' x 11' 2", was used to lift boards from rollcase up onto edger

299A
Belt Conveyor *

300
Belt Conveyor *
16" x 91", no drive, 10" cleated belt

301
2 Strand Transfer Deck *
24" x 69"

302
Skate Rolls *
12"-24" wide x 8'-10' long, 5 sections

303
Tailing Belt *
6 1/2" x 88", 5" belt, hydraulic drive

304
Hytrol 180 degree Conveyor *
Serial # 573934, 94" x 124" overall, 18" conveyor belt, 30" adjustable legs

305
50" 3 Blade Edger *
20" blades, no drive, rough condition, 2 moveable blades

306
J.A. Vance 42" Edger *
No drive

307
Whirlwind 18" Dust Blower *
8" inlet, no drive, brand new

308
4 Strand Unscrambler *
10' x 10' x 6' high, no drive

309
32" Exhaust Fan *
14" inlet, electric drive

309A
32" Exhaust Fan *
14" inlet, electric drive

309B
32" Exhaust Fan *
14" inlet, electric drive

309C
32" Exhaust Fan *
14" inlet, electric drive

310
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310A
24" Exhaust Fan *
8" x 15" square inlet, electric drive

310B
24" Exhaust Fan *
8" x 15" square inlet, electric drive

311
Baghouse *
54" x 72" x 15' tall

312
Steel Dust Pipe *
18" x 20', 6 bolt-together sections

313
Dust Pipe *
22" x 5', 12 sections

314
Dust Pipe *
28" x approx. 200', 2- 90 degree elbows

315
5 HP Hydraulic Pack *

316
3 HP Hydraulic Pack *

317
3 HP Hydraulic Pack *

318
7 1/2 HP Hydraulic Pack *

319
7 1/2 HP Hydraulic Pack *

320
7 1/2 HP Hydraulic Pack *

321
Hydraulic Pack *

322
20" Blower *
Electric drive

323
24" Blower *
10" inlet, 30 HP electric motor

324
32" NYB Blower *

325
24" Blower *
16" inlet, no drive

326
36" Blower *
16" inlet, no drive

327
36" Blower *
12" inlet, 30 HP electric motor

328
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

329
Hydraulic Unit *
2 separate pumps. 1 - 7.5 HP and 1 - 10 HP motor. Vane type and pressure comp pumps. Good condition.

330
Hourglass Rollcase *
30" x 40', 12" x 22 1/2" rolls, 30" roll spacing

331
Salem Bar Turner *

332
36" Sanborn Bandmill *
# 85-01-53, 6" band, needs to be gone through

333
Jeffery Hog *
Model 54WB, serial # 14213, no drive

334
24" Cornell Blower *
10" inlet, no drive

335
36" Blower *
14" inlet, no drive

336
60" Blower *
41" inlet, no drive

337
24" Cornell Dust Blower *
10" inlet, electric drive

338
36" Blower *
28" inlet, no drive or shaft

339
Airlock *
Electric drive

340
20" Airlock *

341
Brewer 4 Strand Transfer Deck *
10' 6" x 19' x 40" high, air popups

342
Over the Wheel Tracks for Skid steer *
For 10.5 tire

343
40" Mellott Chain Turner *

344
Electric Motor *

345
Waechter 3 Head Resaw with Return *
Model 24, serial # 2021, center head is the only one currently operable, compatible with Wood-Mizer parts

346
40 HP Hydraulic Pack *

347
Schutte Buffalo Hammer Mill *
Model 1320, serial # 04-04-076

348
Steel I-Beams *
12" x 16' x 9' 6", 2 pieces

349
4 Strand Transfer Deck *
12' x 13' 4" x 32" high, electric drive, roof top chain

350
Blo-Hog *

351
Rotating Table *
48" x 56", electric drive

352
Amerimulch Coloring Machine *
Electric drive

353
Hard Maple Burl Log *
Approx 9' long, 15" log diameter, and 55" burl diameter.

354
48" Dust Blower Completely Rebuilt *
22.5" Inlet Diameter. 20" Outlet (Square). Completely rebuilt! No power.

355
HMC 4 HB Carriage *
Model: AC44. SN: SC44-117. Air over air setworks. Some spare parts.

356
Band Pallet Dismantler *
60" capacity. Electric drive. 10 HP 3 phase. Good condition.

357
Crown Pallet Jack *
24 V battery drive. Good working condition.

357A
Crown Pallet Jack *
24 V battery drive. Good working condition.

357B
Crown Pallet Jack *
24 V battery drive. Good working condition.

358
6 Strand Transfer Deck *
9 1/2' wide x 14' long. C55 rooftop chain. Very good condition.

359
3 Strand Transfer Deck *
7' x 15'. C55 roof top chain. Electric drive. Good condition.

360
Dust Cyclone *
44" diameter. 8' tall. 3 - 8" inlets. Stainless steel. Excellent condition.

361
6 Semi Tires *
5 have rims.

362
55 Gallon Steel Barrels *
2 per lot.

362A
55 Gallon Steel Barrels *
2 per lot.

362B
55 Gallon Steel Barrels *
2 per lot.

362C
55 Gallon Steel Barrels *
2 per lot.

362D
55 Gallon Steel Barrels *
2 per lot.

363
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363A
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363B
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363C
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363D
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363E
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363F
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363G
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363H
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363I
Plastic 250 Gallon Tote *
1 per lot. Good condition.

363J
Plastic 250 Gallon Tote *
1 per lot. Good condition.

364
Waste Conveyor *
On incline except 3' flat. 36" wide x 15' long overall. Paddle style. Hydraulic drive. Good condition.

365
Skid of Hydraulic Hoses and V Belts *

366
2 Air Impacts *
with some sockets. Working condition.

367
12 Volt Heater *
Good condition.

368
Automatic Propane Scales *
For 20 LB cylinders.

369
5 Skids of H-78 Chain *
With 3 drive sprockets. Several hundred feet.

370
Portable 230 Air Compressor *
Engine needs to be rebuilt but compressor works good.

371
Iveco C13 Diesel *
49873. TIPO: C13ENTD20.00A800. Around 17,000 hours. With extra filters, controls and wiring. Good working condition.

372
Dyna Products Vertical Sizer *
No cutter head. Hydraulic drive. Good working condition.

373
Oil Cooler *
24" x 24". Hydraulic driver for fan.

374
Quincy Model 240 Air Compressor *
Size: 4x3. Working condition.

375
Barn Sweep Chain *
Cornell style. 17" paddles. 50' long. Good condition.

376
Barn Sweep Chain *
Cornell style. 11" paddles. 2 sections. 70' total.

377
Ladder Back Chain *
25' long approx 12" wide.

378
Catwalk with Railing *
30" wide x 22' long. Very good condition.

379
Skid of 90's and 45's for 8" Diameter Dust Pipe *
PVC

380
Steel Lumber Cart *

381
Skid of Hyd Flow Controls, Pulleys, and Sprockets *

382
2 Pulleys *
10 groove 16" diameter for D belt. Hub is 2 7/8" shaft.

383
West Salem Grinder *
52" Wide. 100 HP electric motor. Includes Vibrating conveyor. 52" W x 17' L. Electric drive on the vib. conveyor as well. Includes electrical panel. Overall in good condition.

384
48" Dust Blower *
16" inlet. Electric drive. Needs belts. Good condition.

385
Shavings Bagger *
3 bay bagger. Includes hydraulic unit. Good condition.

386
2 Skids of Rollers *
Approx. 6 1/2" diameter x 7' long. Excellent condition.

387
Skid of Rollers *
Approx. 8" diameter x  7' long. Good condition.

388
Debarker with Barn Sweep *
Was ready to run but has sat for a few years.

389
JD 6068 Diesel Power Unit *
Radiator. New alternator. Changed oil. New battery. Clutch. C groove pulley. New Murphy shutdown controls and wiring in 2021. Runs good. Unknown hours but thinks maybe around 10,000. Uses no oil.

389A
Hydraulic Reservoir *
Approx. 450 gallon capacity. 1/3 full of hyd oil.

389B
Hydraulic pump *
15 GPM & 10 GPM. Needs new shaft.

390
Meadows Edger *
36" wide. Power Horse 420CC gas engine. Good for 1"-2" with current engine. Capability up to 4" with bigger engine. Current engine is a little small.

391
Fast Trac Portable Bandmill *
Takes 4 1/2 to 6 inches wide bands. All motors are on it. Comes with the cab, log turner, and an outfeed belt.

392
Belt Conveyor *
24" wide x 12' long. Electric drive. Good condition.

393
Cornell Cutoff Saw *
24" blade. 28' infeed and outfeed. Electric drive. Working condition.

394
3 Head Trim Saw *
16" blades. Electric drive with lasers. 12' capacity.

395
Self Dumping Hopper *
Vestil. 4' x 4' x 2'. 2000 lb capacity.

396
Rack of Various Conveyor Belts *
All brand new.

397
Wooden Lumber Cart *

398
Belt Conveyor *
4' x 17'. Electric drive.

399
Belt Conveyor *
53" wide x 16' long. Electric drive.

400
9 Step Stairs *
3' wide x 6' high. 10'6" long.

401
Pallet Chief IIII *
With stacker. Good working condition.

402
21" x 30' Auger *
Electric drive.

403
CompAir Air Compressor *
Hydro vane. 6645 hours. Excellent condition.

404
Dust Filter System *

405
Air Tank *
Approx. 80 gallon capacity.

406
Shock Absorption Roller *

407
Baker 2 Head Resaw *
Electric drive. Good condition. Has been sitting for a year.

408
Morgan Scragg Mill *
Hydraulic power pack included. Inserted tooth blades. Electric drive. Good working condition.

409
Brewer Gang Saw *
SN: 111988. Model: BR_2487. Single arbor. Infeed rolls. Pallet of new blades, spacers, and some parts. Electric drive. 100 HP electric motor and a few smaller ones included. Good working condition.

410
Georgetown Pallet Jack *
5500 LB. Capacity. Brand new rebuild kit. Works like new.

411
Miller CP-250TS Welder *
Comes with whip, ground, and gas line. No tank. Good working condition.

412
Log Turner *
Needs work.

413
Chop Saw *
With 10' infeed. 4' outfeed. 4 air stops. Hydraulic powered, includes hydraulic pump. FIRST LOT OF AN ENTIRETY.

414
Pendu 5000 Gang Saw *
Lineshaft ready. Has 188 HP Duetz power unit. Includes two 24" dust blowers and spacers.

415
140 - 10" Gang Saw Blades *

416
Unscrambler *
With infeed deck that is 2 strand x 10' long. 2 strand unscrambler has hydraulic drive.

417
Entirety of Lots 413 - 416 *
With a 10% raise.

418
38" Burlington Wide Belt Sander *
With 8 extra belts. 3 phase electric drive. Double head. good working condition.

419
4 Log Bunks *

500
1991 45' Walking Floor Chip Trailer
CPS in good working condition.   VIN: 1C9535620MP389278

501
John Deere 440C Cable Skidder
SN: 292234T. Meter reads 1312 hours but may not be accurate. John Deere engine. Good working condition.

502
John Deere 340D Cable Skidder
SN: DW340DA502149. Meter reads 9979 hours. 83" blade. Good working condition. Winch cover is missing. May have a hydraulic leak but can't see where.

503
Skidder Tire Chains
Bear claw. Enough for 2 tires. Very good condition.

504
Brand New Tires
Nylon tubeless 24 Ply rating. 20.5-25. L-3/E-3. DL-3. 20 PLX. Set of 2

505
Trailer Hitch Receiver Attachment
Brand new. Skid steer attachment.

506
Utility Service Trailer
No brakes. Good title. MVIN: 372854 IND. As is. Everything was still working when he quick using it. All tools pictured come with it. Quincy air compressor with Honda engine.

507
Lane 2408 Tub Grinder
JD 6068 Power unit. Model: 6068TF275D.E.H. SN: PEG6068T431721. 1568 hours from new. Electronic controlled. 11' concave outfeed belt. Jacks and belts are hydraulic. Has a remote but the remote does not work. Could possibly be repaired. One sweet machine!

508
Lane LSC-35 Concave Belt Conveyor
30" x 35'. Honda engine powers hydraulics. Hydraulic lift, drive on belt, and jacks. Approx. 1000 hours from new. Lights.

509
Morbark 950 Tub Grinder
Model: 950. SN: 555-025. Freshly painted. Extra screens. JD model T06068TF150 diesel. 6.8 L. 170 HP @ 2500 RPM. Meter showing 1960 hours.

510
Axels for 19.5 Tires.
This lot is located at: 150 Seybert Ave, White Pigeon, MI 49099.

511
Bunton 52" Lawnmower
Vanguard 20 HP motor. Works good.

513
1981 Cat 518 Cable Skidder
Machine SN: 50S03196. Rebuilt 3304 engine SN: 78P5614. Rebuilt torque converter. New transmission pump. Center pins and bushings are worn a little but are still useable. Winch was worked on but needs slight adjustment and does not freewheel. No tire leaks. Unknown hours. Extra winch that is included fits this machine but it does have some parts missing. This Lot is located at 5141 Produce Rd, Port Trevorton, PA 17864.

514
Set of Diamond Tire Chains
Set of tire chains for 28-l double diamonds. Used very little. Tires are bad.

515
Delimber CTR 314
For landing loader.

516
Sellick SD-80 Forklift
Diesel. Works and operates well. Hour meter is not accurate.

517
John Deere 644B Wheel Loader
Runs and operates. Just got out of the shop to replace rear axle. Works very well.

518
Swinger Wheel Loader
200-2079 LT 5000. Perkins engine. Foam filled tires. New battery. Weights for the back. 5060 hours. Just went through it. A good solid machine.

519
1992 Freightliner FLD112 Truck, VIN # 1FUY3ECB7NP522751
Year: 1992
Make: Freightliner
Model: FLD112
Vehicle Type: Truck
Mileage:
Plate:
Body Type: Highway
Trim Level:
Drive Line: 6x4
Engine Type: Cat L6, 10.3L (629 CID)
Fuel Type: Diesel
Horsepower: 276-335HP
Transmission: 9 speed
VIN #: 1FUY3ECB7NP522751

Features and Notes: Clear title. Needs a new tire. DOT compliant. Operates very good. Mileage may not be accurate.

520
Prentice Grapple *

521
Brand New Light Duty Log Hauler *
For firewood logs.