Lake Erie Equipment Consignment Auction
Listing ID#: 464000

Sale Location

Mesopotamia, OH 44439
Sale Dates and TimesSALE IS COMPLETED
Friday Mar 25, 2022 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.



 



 



 



 



 



 



 



Bidder Terms and Conditions


These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

 

  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.



“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.



“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.



“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.



“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.



“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.



“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.



“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

 

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.



"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.



“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.



“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.



“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.



“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.



"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.



“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.



“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).



“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.



“Property” means the Real Property and the Personal Property.



“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.



“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.



“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.



“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.



“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.



“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).



"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.



“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.



“Without Reserve” means Absolute.

 

 


  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Auction Conducted in the State of Indiana.

 


    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.


 

  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.



The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.



The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.



X The Auction for the Personal Property is an Absolute Auction.



The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

 

  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

 

  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

 


    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.


 


    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.


 


    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.


 


    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.


 


    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.


 


    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.


 


    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.


 


    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.


 


    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,


(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

 

    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.


 


    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.


 


    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.


 


    1. Online Bids. Online bids may not be reduced or retracted.


 

  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

 

  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

 

  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

 

  1.  

 

  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

 

  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

 

  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

 

  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

 

  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

 

  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.


  1.  

Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

 

  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the




vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

 

  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

 

  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

 

  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

 

  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

 

  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

 

  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

 

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

 

  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.









 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

 

  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

 

  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

 

  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

 

  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

 

  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

 

  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Listing Information
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.
 

00
Information Lot
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 ( jc2559@gmail.com) fax 440.693.4316. Consign early for maximum free marketing.

98
Manual Sealless Steel Strapping Tool*
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

99
Heavy Equipment Key Set 24 Keys*
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

100
Miller Bobcat 225 Welder
Serial # La257374, meter shows 1030 hours, runs and welds good, Kohler gas engine

101
48" Log Rite Cant Hook
Brand new, ch 048 cant hook

102
36" Log Rite Cant Hook
Brand new, PV036, peavy cant hook

103
30" Log Rite Cant Hook
Brand new, MS030

104
Handyman Jack
Model HM-485, brand new, 4660 lb. capacity, 48" tall

105
New Husqvarna 372XP
Serial # 2021 0900267, with 20" bar chain

106
New Husqvarna 395XP
Serial # 2019 2130900, no bar and chain

107
Used Husqvarna 395XP
Serial # 2017 2136050, with 24" bar and chain, works good

108
Husqvarna 395XP Chain Saw
Serial # 2017 1333122, with 24" bar chain, works good

109
Used Husqvarna 372XP Chain Saw
Serial # 2016 0200671, with 20" bar chain, works good

110
Thunder Boy Auger
Model Y43208, serial # 2016 03795, with 7" auger, like new

111
Fiskars 5 Piece Ax Set
New 36", 28", 23 1/2", 17", 14", all have lifetime warranty

112
Cyclone Chain Hoist
Chain falls 1 ton aluminum frame, good condition

113
Mousehole Anvil
5 1/4" x 24 1/2" x 11", 196 #

114
Master Mechanic Socket Set
3/4 drive, 21 piece set, like new condition

115
New DJM Pallet Jack
Brand new, 5000 #

116
Barrel of Chain
Approx. 350' 3/8" Gr. 30 chain, brand new

117
Knaack Portable Tool Box
On wheels, loaded with mostly USA quality tools, electric, air, wrenches, socket set, hammers, pipe wrenches, crescent wrench, vise grips, and lots more

118
1000 Gallon Air Tank
Refurbished

119
500 Gallon Air Tank
Refurbished

119A
Big Green Egg On Stand

120
Cooks Edger
2 blade 12 1/2", 3" x 26", 90" infeed, 48" outfeed live belt with 5" extension, 18' 6" overall length x 80" wide, hydraulic drive

121
HMC Vertical Edger
HMC model EV1, serial # EV10-26, 2- 20" blades, 30 HP, 3 PH electric drive, hydraulic adjustable, 230/460 V

121A
Hilltop Equipment Vertical Edger*
40 HP, 3 phase, 2-20" blades, self contained hydraulic pump, very good condition

122
Morgan Edger
22" x 3", 48" in and out power conveyor, 190" overall length, 36" overall width, has 1- 10" blade, could use some TLC

127
Belt Conveyor
24" x 128" conveyor belt, 12"-23" high, no drive

128
Lumberlift
4' x 6' x 4", hydraulic drive

128A
Steel Banding
1 skid of 12 roll, 3/4" x .031 H.T. banding metal

128B
Steel Banding
1 skid of 14 roll, 3/4" x .031 H.T. banding metal

128C
Steel Banding
1 skid of 24 roll 3/4" x .031 H.T. banding metal

128D
Steel Banding*
7 rolls, 1 1/4" banding

128E
Banding Cart*

129
Belt Conveyor
12" x 33', 6" x 42" tall conveyor, has 1- 4" side, 2 HP, 3 PH, electric drive

129A
2 Strand Live Deck*
28" x 30' 6", electric drive

130
Belt Conveyor
20" x 20' x 4" sides, 12"-80" incline conveyor belt, 3 PH, electric drive

131
Lumber Rolls
44" x 3 1/2" x 10' long, 32" high lumber rolls

132
Crossover Conveyor
Brewer Crossover, hydraulic drive, 36" x 96" x 36", 3 strand deck, 10" x 96" conveyor roll, hydraulic drive, 8" x 72" rolls, no drive

133
Belt Conveyor
14" x 10' angle, 6' 6" flat red conveyor, 5" sides, 72" high bottom, 57" high on top, 1/2 HP, 3 PH, electric drive

133A
Belt Conveyor*
8'' wide x 18' 6"

134
Lumber Rolls
56" x 84" x 30"

135
Belt Conveyor
36" x 35" incline conveyor, 23"-34" tall hydraulic drive

136
Roll Case
16", 16' long, 4 1/2" d. rollers, adjustable height 33"-42", no drive

137
Lumber Rolls
12" rolls, 84" x 25" x 64" Pre Feeder shop made, hydraulic drive

138
Belt Conveyor
Brewer 13" x 12' x 32" belt conveyor, no drive

139
Lumber Lift
42" x 87" x 19" electric hydraulic lumber lift, 3 PH electric

145A
Switch Blower Pipe*

139A
Lift Table*
40" x 48", 2500 lb. capacity, electric, condition unknown

139B
Lift Table*
36" x 52", electric, condition unknown

139C
Lift Table*
36" x 60", condition unknown

139D
Atlantic Kelly Hydraulic Lift
3 sections-18"x50", 2000 lb capacity

140
Belt Conveyor
24" x 11' incline conveyor, 12"-57", 8" sides, 1 HP, 3 PH electric drive

140A
Koger Air Lock*
Size 16, 2 HP, 3 phase

141
Kohler Natural Gas Generator
50 KW, 62.5 KVA, 91 original hours, has not run in awhile, condition unknown

141A
Belt Conveyor
20" x 8' incline conveyor, 6"-30" height, 2 HP, 3 PH, electric drive

142
Upcut Saw
PF model 90, electric drive

143
4 Cylinder Perkins Diesel Power Unit
With 5 HP air compressor and hydraulic unit with clutch on frame, meter reads 2132 hours, oil cooler

144
Switch Blower Pipe
2014 Imperial model IDV-10-12, serial # 2716, 10" inlet/outlet

145
Switch Blower Pipe
2014 Imperial model DV-14, serial # 2717, 14" inlet/outlet

146
Baker Stacking Rack
Model BSR-O, serial # 05-187, 84" x 84" x 72"

147
Pallet Chief Pallet Stacker
68" x 78" x 108", air operated, looks like excellent condition

148
Minneapolis 4 Cylinder Gas Engine
Serial # 620782 with clutch, flat pulley, hand or electric start, does not run

149
6 Cylinder John Deere Diesel
With clutch, meter shows 2218 hours, ran when taken out of service, but needs new radiator

149A
John Deere Power Unit*
Model M63HA, serial # 1090200, with hydraulic pump, runs

149B
Cat Power Unit*
Model 4CPXL07.2HSL, 3126 diesel, power unit 210 HP, with radiator and fuel tank, has new clutch with 12" 10c groove pulley, runs good

149C
471 Detroit Power Unit w/ Clutch*
Hours unknown, has all new seals and rings, head redone and ready for work, good clean unit

149D
John Deere Power Unit*
Model 4024TF270, serial # PE4024T011511, came off Maruka, runs good

150
Self Dumping Hopper
6 yard

151
Self Dumping Hopper
5 yard

152
Self Dumping Hopper
4 yard

153
Self Dumping Hopper
3 yard

154
Self Dumping Hopper
2 1/2 yard

155
Self Dumping Hopper
2 yard

156
Self Dumping Hopper
1 1/2 yard

157
Self Dumping Hopper
1 yard

158
Self Dumping Hopper
3/4 yard

1000

159
2- Nylon Binders
Model 2350, serial # 5589, plastic 1/2" banding tightener/sealer

160
Strap Binder
Model 2309, serial # 1018t, air 1/2" plastic tightener/sealer, size 13

161
Strapping Tool
Model 2314, hand tightener/sealer combo, 3/8" thru 3/4" for plastic banding

162
2- Gerald Metal Sealless Strapping Tools
For 5/8" steel banding

163
2- Gerald Banders
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

164
Gerald Bander
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

165
Banding Tools
9 assorted sealers, 3 tighteners, assorted sizes

166
Banding Tighteners
3 Banding tighteners up to 3/4", like new condition

167
Banding Sealers
4- 3/4" sealers, 2- 5/8" sealers, used but like new condition

168
Gerald Sealer
Model 630, 3/4" heavy duty, works good, with pusher seal

169
Banding Sealers
4- 3/8" , like new condition

170
Banding Tools
2- 1/2", 1- 5/8", 1- cutter, fair condition

171
Banding Sealer
1 3/4", double notch, good condition

172
1 1/4" Banding Tools
3- 1 1/4" sealers, 2- mip 1400 tighteners

173
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

174
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

175
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 2 chargers, works

176
Air Banding Tools
Fromm air tightener, Fromm air sealer, Aero-motive Balancer, condition unknown

177
Cornell Conveyor
28' x 13 1/2" live belt conveyor, 1 HP, 3 PH electric motor, controls are 30" tall, 17" wide x 35" tall

178
Log Turner
30", good cylinders, hydraulic drive

178A
Deduster*
8", no drive, 5" x 56" conveyor belt, 8" x 9" brush wheels

179
Unscrambler
No drive

180
Sawdust Bin
73" x 111" x 120" saw dust bin, 5-18" outlet, 10" inlet, 88" tall bottom

180A
Sawdust Bin*
5 x 7 x 9, with hydraulic auger, 36" drum, 15" inlet, 11 x 13 outlet, 8 1/2" wide paddle in good condition, hydraulic blower, mfg. by Yoder Hydraulic

181
Cornell Slab Saw
30" blade, 13 HP drive, 18" x 48" outfeed conveyor, 18" x 12' infeed conveyor, unit works, but will need some help

181A
The Summit Slab Saw*
36" blade with Kohler 27 HP gas motor, 18" x 60" live conveyor, 18" x 102" infeed conveyor, made by Hershberger Mfg.

182
Morbark Chipper
Model 13, 20" roll, Perkins diesel with clutch, 56" wide infeed, 60" long, meter shows 820.7 hours

182A
Beloit Passavant Stationary Chipper*
Model 1048-20-D, serial # 50325-01, 48" wheel, 18" x 21" inlet, 12" x 12" outlet

183
52" F Saw Blade
Works but need attention

184
Phelps Blower
24" drum blower, has good paddles, belt drive, 8" inlet

185
Frick Husk with Mandrel

186
All Old Saw Blades

199A
Steel Lumber Dipping Tank*
6' x 6' x 20' x 1/2" thick

187
Lumber Rolls
11 piece 12" used lumber conveyor drive rollers and 1 new roll morse, C-2060H conveyor chain

187A
Self Dumping Hopper
3/4 yard, used

188
Self Dumping Hopper
3/4 yard, used

189
Self Dumping Hopper
1/2 yard, used

190
Self Dumping Hopper
1/2 yard, used

191
Honeyville Blower
Model HF26, serial # 26987, 26" inlet/outlet, has good paddles, no drive

192
General 10" Blower
Serial # A-8950, 7" inlet, 6" outlet, no drive

193
Dayton Blower
15" air circulation, 16" intake, 12" x 16" outlet, no drive

193A
Bruning & Federle Blower*
Model JJ 26 2186, date 8-6-01, 60" drum, 19" x 45" paddle in good condition, no drive, 14" x 6 groove pulley

193B
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, connector, elbow, 6" to 18"

193C
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, miscellaneous 6" x 24"

193D
Blower Pipe Fittings*
44" x 56" x 42" box full of pipe clamp rings and miscellaneous fittings, elbows, reducer, wyes

216
Yanmar 60 Track Forwarder
24" x 12' tracks are 90%, 8' log deck on back, 101" x 15' x 122" tall overall, with picker, Yanmar diesel model 4T112TL-FW, 130 HP, meter shows 2930 hours

193E
Blower Pipe*
Skid of blower pipe, reducing wye, manifold, reducer, elbow

193F
Line Shaft Coupler*
3 1/2" reduces to 2 1/2"

194
Hytrol Belt Conveyor
32" x 7', 28" tall, adjustable height, 3 PH, electric drive

195
Webster Vibrating Chute
Model FSM, serial # 892-3641-1, 24" x 20' x 7" side, no drive

195A
Expandable Conveyor*
24" x 6" x 30" flexible conveyor, expands to 19' long, 44" high, on casters, good condition

196
Whirlwind Upcut Saw
Model 212R, serial # 1881M52R, 18" blade, 10 HP, 3 PH, with 14" x 10' conveyor with 5 stops

196A
Hydraulic Lift*
Model P-72-040SF, serial # 98526-2, American 4000 lb. capacity lift, air/hydraulic lift, 31" x 64" x 19" plus 3" steel channel on top on 6" swivel caster

197
Steel Banding
3/4 x .029 high test metal banding, 12 rolls over 1200 lbs.

198
Self Dumping Hopper

199
Self Dumping Hopper

247

199A
Mellott Rollcase*
24" x 23', 6 1/2" rolls, hydraulic drive 

199B
Mellott Rollcase*
24" x 24', no drive

199C
3 Strand Transfer Deck*
7' x 10' x 60" high, hydraulic drive

199D
Meadows Log Turner*
Serial # LT-0056-98

199E
Drop Deck*
3' x 20' slant drop

199F
Drop Deck*
67" x 20' slant drop deck 

200
Meadows Portable Mill
56" F style, 2 air dogs, 12' carriage, 40' track, air dogs, receiver, log turner

201
Wood-Mizer LT40 Portable Bandmill
VIN 456A42410RIFE6037, 1994, 18 HP Briggs motor, has new wheels, meter reads 179 original hours, approx. 25' long

202
Wood-Mizer LT25 Portable Bandmill
VIN 456822019VENEC6678, 1998, Kohler 15 HP motor, approx. 22' long, has only cut approx. 10,000 board foot, but was stored outside under tarp, motor just rebuilt

203
1/25 Wood-Mizer LT40 Bandmill
New, fully hydraulic sawmill

204
Band Sharpener
Electric, very little use

205
Single Tooth Setter

206
Corinth Left Hand Portable Saw
3 head block, 52" f pattern with 7" blower, 16' carriage, 34' track, 14" x 9' live belt conveyor, older saw but works good

207
Hand Filer, Saw Wrench, and Swedge

208
New Eagle Claw Teeth
Box of 100

209
Detroit Left Hand GM471 Diesel
Rebuilt clutch, runs good, has minor oil leak, new radiator, alternator model 4045C, serial # 35080, meter reads 2498 hours

368

210
Double Tooth Band Setter*
# 080-214, sets up to 3" bands, like new condition, made by Hershberger Mfg.

369

211
4 Lumber Tiger Carriage Head Blocks

370

212
Setworks for Lumber Tiger Carriage
1 complete set, 1 partial set for parts

214
Hendrick 14" Panel Saw*
2 extension tables, 4' x 12' and 4' x 8' 4", looks good but condition unknown

215
Double End Trim Saw
Speed saw, 3 ph., 240 V, electric drive, 102" wide x 29' long x 40" tall

216A
Steel Dump Bed*
7' x 7' w/ fold down sides and tailgates, good condition, came off Maruka, does not include any contents

216B
Maruka Hydraulic Knuckleboom*
Model 31191020010, serial # 040565, needs kone new seal. otherwise in good condition

217
John Deere 548E Skidder
Serial # DW548E5535469, meter reads 6426 hours, JD 4045 engine, 86" blade, winch with 50' cable, runs good

218
Franklin 170T Cable Skidder
Serial # 16737, 88" x 28" blade winch, meter reads 4522 hours, 23.1-26 tires 90%, Cummins diesel # 60207739

219
Skidder Tires
18-4 34 tires off of 540 , good rims, 10% rubber

220
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220A
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220B
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220C
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220D
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220E
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

221
J.D. 455E Crawler Loader
Serial # TO455EX739737, good 15" tracks, 6" x 48" forks, with winch, under carriage 55%

222
2014 Bobcat T650 Skid Steer
Serial # A1JG11189, 18" tracks, 80" heavy duty bucket, all new fuel system 200 hours ago, meter show 4698 hours, tracks 90%, good sprockets, very good machine

222A
2006 JCB Telescopic Loader
Model 52755, around 4000 hours, 6000 lb. capacity, foam filled tires, skid steer quick attach and hydraulic couplers, good working condition

223
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 month ago, comes with 3 phase charger

224
Skid Steer Tracks
Tracks came off case 85XT, but will fit more, 18" wide, 82" log tracks, 90% rubber, frame looks in good condition

224A
Rubber Case Skid Steer Tracks*
18" wide, 80" long, Approximately 50% tread, Off of Case TR320

225
Cat Crawler Loader
955 Cat, 1978, approx. 4000 hours, under carriage about 30%, tracks about 70%, no leaks, runs good, with bucket, hour meter not working

226
Hyster D4 Crawler Winch
Works

226A
Ramsey 208 Winch*
Model J10R, 10,000 lb. capacity, PTO drive, condition unknown

227
Rubber Tracks
Used, off of Bobcat 300, 18" wide, approx. 40% rubber

228
Metavic Log Wagon
Serial # ETI7RF180908125, with 13 HP Honda motor, air tires, 6 wheel, one wheel needs new bearing, good condition

229
916 Cat Loader
Serial # 2XB01323, with 1.75 yard bucket, weights 24,200 lbs., 17.5-25 tires 40%, meter reads 2327 hours, runs very good, has weak transmission

229A
1994 Komatsu WA180-1 Wheel Loader*
Serial # A75547, meter reads 21975 hours, good working condition 

229AA
Clark Loader*
45C-PK loader, serial # 439B121CB, meter shows 4635 hours, runs good

229B
Bucket For Komatsu*
2.25 yd. 96" wide

229C
Forks For Komatsu*
46"

229D
Set of Four Used Tires*
17.5-25, very good condition

230
2007 Elgin Pelican Street Sweeper
John Deere 4045T Power Tech diesel, meter reads 7245 engine hours and 24,050 miles

231
JLG 8042 Sky Trak
Serial # 0160051832, 2013, 8000 lb. capacity, 42' reach, 4" x 48" forks, foam filled tires 60%, Cummins diesel engine model QSB3.3, 100 HP, meter reads 2978 hours, very good condition

232
Toyota LP Forklift
Model 7FGU32, serial # 70343, 6000 lb. capacity, solid pneumatic tire 80%, side shift 88" lowered mast, has cab with 2 door, heat, fan, lights, 500 hour on new motor but has broken timing cover. ENGINE DOES NOT START ANYMORE. WE DON'T KNOW WHAT THE ISSUE IS.

233
Linde H25D Forklift
Serial # H2X393U02651, 4655 lb. capacity, bald tires, 88" lowered mast, meter reads 12,000 hours, rebuilt head gasket, new timing belt

234
Cat 267B Skid Steer
Serial # Cat0267BHCYC01032, with hitch and 7' bucket, meter reads 3552 hours, tracks 80%, no oil leaks, very good machine

235
John Deere 455E Crawler Loader
With carco 28 winch, meter reads 13534 hours, 6' x 44" forks, has oil leak between winch and transmission, good machine, like new under carriage

235A
Used 450 Case Crawler/Dozer Parts

236
Riding Floor Sweeper

237
Stanley 350 Jackhammer
All new seals

237A
Jack Hammer*
large, works, will fit 125-200 excavator

238
Case 1816 Skid Steer*
60% rubber, 27 x 8.50-15, 42" bucket, Tecumseh gas motor, meter reads 495 hours, runs good but need clutch rebuilt

239
Bobcat Steel Skid Steer Tracks*

240
Walk Behind Burro Donkey Truck Carried Forklift*
Model B13-3K, serial # EU, code # 2HanXXDDBHHAUXXXEA5, electric start, 13 HP, Honda hydraulic drive, 3000 lb. capacity, weighs 1963 lbs., runs good, forward/reverse handle needs work

241
1998 New Holland LX665 Skid Steer*
Hand controls, SN-852052, Hours unknown, 64" quick attach bucket

242
Forks*
6" x 44", quick attach, 70" overall, fits Komatsu 200 wheel loader, has crack in frame

243
Forks*
6" x 48", will be repainted

243A
Extension Forks*
6" x 6'

244
1985 Case 580E Tractor with Backhoe*
80" bucket, 36" backhoe bucket, Includes extra 16" bucket for backhoe, PIN-17026296, Meter reads 2555 hours

245
2007 John Deere 320 Skid Steer*
PIN T00320A150478, includes 70" bucket, quick attach, hand and foot controls, 52 HP engine, meter reads 2639 hours, 32" solid rubber tires, good working condition

246
Skid Steer Wheels*
12-16.5, air tires, 8 lug, came off lot 245

250
International 340 Utility Tractor
Model 340 utility, serial # 7121P-X-Y, 3 point does not work, runs rough

251
Farmall Super M Tractor
Model A, serial # FAA53637, original paint, runs good, 70% thread, a little dry rot

252
Farmall A Tractor
Runs good

253
Farmall H Tractor
Model H, serial # FBH 377207X1, tires 12.4-38, 50%, a little dry rot, no pulley, has draw bar and PTO, should be running by sale day

254
Farmall Cub
Model F-Cub, serial # 159269, new rear rubber, 1 new front rubber, 6 V, 8.3-24/8-24 tire with 54" snow blade, mostly rebuilt and restored, lights work

255
John Deere 430
Model 430-W, serial # 142788, has PTO, 3 point hitch, 2 cylinder gas, 13.6-28 tire on 12" rim, 70% tires

256
John Deere 40 Tractor
Model 40-S, serial # 64346, 2 cylinder, gas, 6 V, 11.2-24 tires 95%, 3 point works PTO, is scheduled to be repainted before auction

257
John Deere 1950 D
Model D, serial # 188725, repainted, runs good, has 1 hole in right fender, came from Georgia, tires 60% tread, a little dry rot, steering column has oil leak

258
1/16 Scale John Deere D
Model D, new in box

259
1/8 Scale John Deere D
1939, Model D, new in box, 75th anniversary signed by Joseph Ertle, manufactured in USA

260
John Deere A
Model A, serial # 596504, runs OK, original paint came out of Georgia, 13.6-28 tire thread are 50% but dry rot holds air

261
New Holland TC35 Tractor
Serial # G609922, with loader and quick attach bucket, 4WD industrial tire, meter reads 980 hours

262
2017 Kubota MX5800HST Tractor w/ Front End Loader*
Model MX5800 with loader and bucket, 2017, meter shows 190 hours, as close to new as you'll find them, excellent condition

263
Ford Tractor*
8N tractor, not running

263A
3 Point Danuser PTO Auger*
4"-8" auger, 6" is bent

264
Plow*
5 bottom plow

265
Disc*
10' disc

266
Disc*
12' disc

265A
Allow Chalmers Cultivator*
19' 6"

266A
Hay Wagon*

267
Allis Chalmers Tractor*
WD 45 gas tractor, 6 cylinder, PTO, belt pulley, snap coupler 90% rubber, engine model #G-230, serial # 397291, approx. 70 HP, good solid running tractor, no oil leaks

268
1972 Ford 5000 Tractor*
5' side attach bush hog, Hydraulic tank, 3 point hitch, 8 speed transmission, Meter reads 456 hours

278
2000 GMC C7500 Truck, VIN # 1GDJ7H1B7YJ522494*
Year: 2000
Make: GMC
Model: C7500
Vehicle Type: Truck
Mileage: meter reads 138,992
Body Type: Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 7.4L; MFI; High Performance
Fuel Type: Propane
VIN #: 1GDJ7H1B7YJ522494

Features and Notes: RUNS ON PROPANE, has flatbed w/ gooseneck hitch, 87" x 9' bed, 7 leaf spring, good running truck

279
2000 GMC Dually Bed*
Fits Lot 278

280
GMC Service Truck*
1990, 10 speed with 1995 aluminum service body bed with generator, 143,500 miles, Cat 3116 Diesel engine, runs good, under CDL, very good rubber, with title

281
Flat Bed Truck*
1974 Ford 900 cab over 5 speed manual transmission, 46,341 original miles (model C904K), this truck was bought new by the city and was only used as a paint truck, has title, runs good but has damaged radiator

281A
1981 Chevrolet C60 Dump Truck, VIN # 1GBJ6D1A4BV120864
Year: 1981
Make: Chevrolet
Model: C60
Vehicle Type: Truck
Mileage: meter reads 45,017
Body Type: Medium Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 5.7L
Fuel Type: Gasoline
Transmission: 5 speed manual
VIN #: 1GBJ6D1A4BV120864

Features and Notes: GVWR 24,000 lb. 

281B
Valley Ford Dump Bed*
8' x 10' x 40"

282
36 Volt Taylor-Dunn Electric Go Cart*
42" x 76" flatbed with hitch, new lights and wiring, 124" overall length, 5.70-8 wheels

282A
Cushman Motorized Cart
Model 898530-8310, has dump bed, new carb in 2020, needs batteries, not in working condition

284
*Job Site Trailer
8' x 30' office trailer with heater, A/C, power box, 2 doors, looks to be in good condition

285
Pup Trailer
15" x 8' tandem axle, all new brakes, Busking and walking beams, has title

286
Tree Shear with Accumulator
20", 88" wide, 57" deep, 74" tall, came off 549 JD, can be adapted to almost any machine

287
Equipment Trailer
78" x 16' long x 18", black trailer, 54" tongue with pintle hitch, double axle, 2- 15" x 55" ramps, could use some repairs

288
Equipment Tilt Trailer
72" x 17' 6" x 18", 5' long tongue with pintle hitch, 94" over fenders, rear axle broke in half, may need other repairs, double axle trailer

289
Homemade Trailer
76" x 16', double axle, 3' tongue, 12" sides, 2 5/16" ball, no ramps

290
2- Trailer Ramps
16 3/4" x 10' long, 5 1/2" high

291
Trailer
6' 4" wide x 16" double axle shop built trailer, 3" steel side 10" wood side, new jack, tires 85%, trailer in good condition

292
Dump Trailer
2013 Low Pro 24" deck height, 14,000 lb. GVW, 7 x 12 double axle, 2 ramps, 80% tires, has title, has tail gate option, new battery, good condition

293
2007 Universal 2 Horse Trailer
Model ML7X11WTZ, VIN 16HPB11227K014227, with tack room interior, LED lights, 80% tires, steel frame, aluminum body, good condition

294
Equipment Trailer*
97" x 20' flat, 6' dovetail, 2 ramps, dual tandem axle, 80% tires, 20,000 GVW, frame looks in good condition, no contents

295
Enclosed Trailer*
Serial # WC-7235000 with aluminum ladder racks, tandem axle, 69" x 144" inside dimensions, 70" tall side door, 64" x 63" double doors, very good condition, like new wheels, road ready

296
Enclosed United Trailer*
68" x 123" x 70" inside dimensions, with new spare tire, 50 % tires, aluminum ladder racks, 64" x 66" double door opening, nice condition, road ready, single axle

296A
Flat Bed Trailer*
78" x 166" tandem axle, has dry rot wheels, no ramps, nice shop built trailer

296B
Speed Lift Portable Loading Dock*
Model SL6000-B EWP68 RFS, 6000 lb. capacity, 230 volt, 3 phase, 68 1/2" x 96", with 41" and 48" end plate

297
Yellow Pine Steps
Notched stringers and threads, 40" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

298
Yellow Pine Steps
Notched stringers and threads, 40 1/2" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

299
Storage Barn
Rustic 8' x 10' x 92", peak height 114", 56" x 72" double door, with clear coat sealer, shingle roof, yellow pine floor, brand new

299A
Rustic Playhouse*
6' x 10' rustic playhouse with 6' x 42" porch, 3 window, shingle roof, 2 x 8 yellow pine flooring, 22" x 54" door, has clear sealer

300
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

301
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

302
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

303
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

304
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

305
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

306
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

307
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

308
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

309
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

310
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

311
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

312
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 12" high

313
New Servo Motor
2 Kinetex servo motor, 1850 RPM, 480 V, 3 PH

314
Used Servo Motor
3 PH, 480 V, 3200 RPM

315
Hydraulic Cylinder
3 new Parker, model PX115-030-52, electric hydraulic, cylinder

316
Baldor 3 PH Motor
New, 20 HP, 230/460, 3 PH, 1170 RPM, 286T frame, 1 7/8 shaft

317
Air Cylinder
New

318
Air Cylinder
New, 10" bore x 1.00 air cylinder

319
Schmidt Air Press
New, 2" stroke, 9460 lb. capacity

320
Die Lift Cart
Dayton 880, manual hydraulic lift, like new

321
Weld Rabit Gas Welder
With 13 HP Honda motor, with 25" cables, works good, 1- 30 Amp outlet, 2- 115 V outlet

321A
Welder*
Electric Lincoln, 250/250

321B
Lincoln Welder*
Ideal Arc R35-325, serial # AC431961, code 7841-AR, no leads

322
Enco 8" Machinist Vise
Enco model 425-7281, 8" swivel vise

323
Bolt Bins
12 bolt bin organizers with hardware

324
Niagara Circle Cutter
1952 Niagara circle shear and punch, 1 1/2 HP, 3 PH

325
Excalibur Sliding Extension Table
Excalibur left hand, off of saw stop, 26 1/2" wide, 80" deep, 34" tall

325A
Metal Table
30" x 96" x 36", metal work bench

326
Clutch
Off of a 4 cylinder Ford motor, 2 1/4" shaft

326A
Prentice Bro's #2 Drill Press
Variable speed, 110/220 volt, 1 ph., 1/2 HP

327
Newman 8-B Moulder/Planer
24" wide, 14" planer, 4 head moulder, log cabin siding, all in 1 unit, 5' wide, 10' long, line shaft ready, with approx. 300 extra cutters and heads

327A
Party Tent
Model TMG-PT2020F, 20' x 20', fully enclosed, 18Ga 1 1/2" tube frame

328
General 10" Table Saw
Model 650, with 53" fence, no drive

328A
Propane Storage Rack
44" x 29" x 70", 3 shelves

329
6" Cornell Blower
Line shaft ready

329A
2006 Genie Superlift
Model SLC-15, serial # SLC07-37841

330
2002 Reliant Shaper
Model DD34, 1/2" and 3/4" spindle, air motor hookup

330A
Metal Job Site Box
24" x 72" x 26" metal job box

331
Grizzly Sander
9" disc, 6" x 24" belt sander, line shaft ready

331A
Gardner Denver Air Compressor
Model Bra-3G, serial # R7016797, 30 HP, 3 PH, 230/460 V, works

332
Generac LP Generator
Model 0043902, serial # 3844729, 120/240 AC, 15,000 watts, 125/62.5 Amps, 1 PH

332A
2018 Husqvarna 390XP Chainsaw*
Works good but needs new trigger cable

333
Husqvarna 576XP
Serial # 2009 4600001, with 20" bar, heated handle, works good

334
Wilton Drill Press
Model 5810, serial # 24121, variable speed, 1 HP, 1 PH, 120 V, works good

335
Kohler Generator
Generator model 100RZ282, serial # 355752, natural gas, meter shows 1574 hours, was working when taken out of service Nov. 2021, 100 KW, 125 KVA, motor model LSG-8751-6005-A, serial # 04789 A-05-RA,

336
New Clifford Anvil
125 #

337
New Clifford Carroll Wide Face Anvil
70 #

338
New Clifford Carroll Anvil
70#

339
New Clifford Carroll Anvil
30#

340
Miller Welder
Serial # KK001873, BIG40G propane welder, 120/240 V, 1 PH, original 647.4 hours, continental 3 cyl tm 20, works and welds good

341
Miller Welder
Serial # KC320338, BIG20G welder, meter shows 3441.4 hours, 4 cy Continental gas motor model Y112, runs good with leads

341A
Portable Exhaust*
Model 7E10DD41, serial # 1002054, E-Z ARM Air flow system, meter reads 3570 hours, year 2001, for welding

342
Pallet Jack
EP55, 20 1/2" x 48", 5500 lb. capacity, works good

343
Pallet Jack
Crown, 27" x 48", 5000 lb. capacity, very good condition

344
Banding Cart
Almost full roll of 3/4" steel banding and tools

345
Kreg Jig
K3 pocket hole system with 3 drill bits

346
Rigid Pipe Threader
Model 300, serial # 7615559, on tripod stand, 1 PH, 115 Volts, works good

347
Rigid Pipe Threader
Dies from 3/8"-2", all in good working condition

348
Pipe Fitters Box
Loaded, all in good working condition, tubing benders, cutlers pipe wrenches, soldering

349
Socket Set
3/4" drive, Tekton 8 piece impact socket set, 2 1/16"- 2 1/2", like new

350
Belt Lacer
Model 9, serial # 027369, 6"

351
Stihl 038 Chain Saw
Model 038, 24" bar, works good

352
Box Stapler
2 cc carton/box stapler with staples

353
2-Hillman Machinery Moving Skates
With handle

354
Milwaukee Jack Hammer
Model 5332, electric jack hammer, with 1 bit, works

355
Bucket of Chain
1/4" x 100' Gr. 30 Proof coil zinc coated chain, new in bucket

356
CM Chain Hoist
Model 5, serial # 384BS, 2 ton aluminum, works good

357
Polyester Rope
New, 1/2" x 600' spool blue/white rope

358
Bearings
16 pieces 1" flange bearing, 20 piece 1" pillow block bearings, all new

359
Flange Bearing
37 piece, new 1" flange bearings

360
Pillow Block Bearings
30 piece, new 1" pillow block bearings

361
Baker's Choice Wood Stove
Serial # 128935, takes 6" stove pipe, 12" x 12" oven door, 7 3/4" x 10" fire door, 5 1/4" x 10" ash door

362
New Line shaft Welder
Cheetah 250-5.5, serial # 31028, generator welder with 30' welding cable, 25' ground cable, 1 box 1/8" welding rod and used helmet

363
30 LB. Assorted Welding Rods
7018-6010-6018

364
Moak Shaper
Serial # 8465, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

365
Moak Shaper
Serial # 6938, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

366
Air Tank
Approx. 2000 gallon, approx. 80" tall x 76" wide x 170" long, good condition

367
Gravity Box
120" x 87" x 60", was used for coal storage, in good condition

368
Thompson PW-500 Sewing Machine
Walking foot for industrial materials, canvas, buggy oil cloth, in good working condition

369
Tool Cart
26" x 20" x 52", with 4 shelves loaded with paint, oil, and miscellaneous

370
2- Parts Cabinet
Nice clean cabinet, includes blades, screws, miscellaneous

371
Lincoln Electric Motor
25 HP, 230/460 V, 3 phase, 3485 RPM, 256T frame, 1 5/8" shaft with control box, was working when taken off 2 years ago

372
300 Gallon Red Fuel Tank
Mounted on steel sled frame

373
Set of Forks

374
Honey Locust Live Edge Slabs
10 pieces, 1 3/4" x 9' long up to 48" long, kiln dried, planed

375
18' Windmill
Assembled

376
28' Windmill
Brand new in crate

377
Toy Windmill
Miniature, works, 17" tall, toy only

378
New Bolt Bin
Gr. 5 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

379
New Bolt Bin
Gr. 8 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

380
Pallet Jack
Model PE3520-60, serial # 6A143709, 9" x 11' forks, 14' 4" overall length, 35" wide, 24 V, meter shows 6113.6 hours, 4500 lb. capacity

381
Pallet Jack
Model PW3520-80, serial # 6A231514, 9" x 72" forks, 9' overall length, 34" wide, 3 1/4" lowered, raises to 9 1/4", 3630 lb. capacity, battery looks good, meter show 405.4 hours, 24 V

382
Battery Lift
Model 15B-S, serial # IA101048, 12 V crown lift, 1500 lb. capacity, new battery, 75" lifting height, 4 1/2" x 26" forks, needs new front wheels

383
Exide Gold Battery Charger
Model WG1-12-550, serial # OH126791, 24 V charger, 208/480 V, 3 PH, works with lot 380 and 381

384
Fuel Tank
48" x 70" x 80" tall, good condition, on stand with hose and nozzle

385
Fuel Tank
30"x 60", good condition, with hand pump, meter, and filter

386
Fuel Tank
30" x 60", good condition, was used for gas

387
Oil Tank
48" x 70", good condition, was used for new motor oil, is empty

388
Oil Tank
38" x 61", good condition, was used for new motor oil, is empty

388A
Fuel Tank*
250 gallon

388B
Fuel Tank*
250 gallon

389
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

390
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

391
Air Compressor
1993 Leroi 175 CFM screw compressor with John Deere 3179 motor, meter shows 2462 hours, new battery, 33" x 82" x 52" frame

392
2- Scotts Lawn Mowers
16", old but in good condition

393
Silent Reel Push Lawn Mowers
18" and 21", good condition

394
2- 18" Fiskars Push Lawn Mowers
Good condition

395
Harris 2101 Torch Set
With 2 tanks and cart, condition unknown

396
Welding Table
35 1/2" x 86 1/2" x 32", with 1 1/8" top, on heavy casters

397
Metal Work Bench
36" x 114" x 34", with 3/16" thick metal top

398
Anvil
3 3/4" x 28 1/4" x 9 1/2", very good condition

399
Blacksmith Forge
32" x 41"x 7", with Royal Western Chief Blower, blower works, frame may need some sheet metal work

400
Anvil
5" x 29 1/2" x 13", good condition

401
Blacksmith Tongs
4 assorted, 40"

402
Blacksmith Tongs
6 assorted, 20"

403
Blacksmithing Sheet Metal Shear
36"

404
Vise and Drill Press
5" Post Vise Complete Columbian Cannedy-OHO MFG post drill #10 1/2

405
Compound Miter Saw
Serial # 18892043012695, Milwaukee fuel, 12" sliding compound miter saw, 2021, like new condition, tool only

406
Milwaukee Battery
12 Amp, brand new

407
Milwaukee Battery
5 Amp, 2 pack, brand new

408
Stihl 041 Farmboss Chain Saw
Serial # 8440591, 20" bar, works good, collector style

409
Stihl 041 Collector Saw
Serial # 2689207, 20" bar, chain runs, nice

410
Stihl 050 Collector Saw
Serial # 2822424, 20" bar, handle bar is cracked, but works good

411
Cordless Makita Skill Saw
Model XSR01, serial # 0284717, 7 1/4", brand new, with charger and bag, 36 V, no batteries

412
Staples
15 case, 20 box per case, 3/8" contractor staples

413
Finish Nails
41 case, 12 combo pack per case, 23 ga combo pack, 5/8", 3/4", 1 1/4", 1 3/8",

414
Flange Bearing
130 F35212ECS, 3/4", brand new

415
Maytag Winger Washer
Rebuilt with electric motor

416
Wells Metal Cutting Bandsaw
3 PH, 3/4" blade, 7" cutting width, 5" depth, good condition

417
Heat Exchanger
34" x 32" x 10", oil cooler, hydraulic drive, works good

418
3- Laminated Work Bench Tops
30" x 72", like new condition

419
Butcher Blocks
2- 42" x 84" x 2 1/4" pine, 2- 42" x 62" x 2 1/4" maple, all came from bowling alley

420
New Assorted Truck Lights and Miscellaneous
Whole crate full

421
5- Angle Gear Boxes
New 2012, 2 3/4" shaft- 1 3/4" shaft

422
3 Used Hydraulic Motors
1- Char Lynn 101-1016-009, 1- Char Lynn 101-1008-009, 1- red, good condition

423
Gas Air Compressor
15 HP gas engine, has new battery, electric start, runs good

424
Stihl Blowers
Backpack BR600 blower, handheld BG85C blower, both work good

425
Honda 3" Trash Pump
Works good

426
Speedi Cut Concrete Saw
Model SC7314, serial # 07031010878, 12"

427
23 Spools Electrical Wire on Rack
6, 8, 14 Ga and more

428
Kennedy Tool Chest
44" x 22" x 39", on wheels, good condition, 10 drawers total, empty

429
Socket Set
3/4" drive, mostly snap on, Proto

430
Hub City Right Angle Gearbox
Model 800, 1 1/2" shaft, 1-1 ratio

431
Siemens SQD Electric Boxes and Miscellaneous Electric Switches

432
1 Fostoria and 1 Stainless Steel Breaker Box
Fostoria model FPC46348A, 200 amp, 480 V

433
Crate Full of Used Electrical Boxes and Miscellaneous

434
6- SQD 100 Amp Breaker Boxes

435
Air Champ Air Clutches, Miscellaneous Air Regulator/Switches

436
Air Motor
60-1 gear box with air motor, 1- AM432 air motor and miscellaneous air regulator

437
5 Miscellaneous Electric Drive Gear Boxes, Speed Reducer, Reliable 56/150-10 , Flexiline 50-1, Boston 40-1

438
Ge 100 Breaker Box and Big Electrical Box

439
10" Metal Cutting Chop Saw
With blade, 1.5 HP, 1 PH

440
Reznor Natural Gas Heaters

441
Reznor Natural Gas Heaters

442
Reznor Natural Gas Heaters

443
22" Centrifugal Ventilator
2 HP, 1 PH, belt drive

444
Oliver Cutoff Saw
Model 94-DH, serial # 97756, 3 PH, 7.5 HP, 240 V

445
Smithway 1" Spindle Shaper/Router
Model # CO1F, serial # 205, 5 HP, 3 PH, 230/460 V

446
Toritz 6" Cyclone Bin
With 37" x 37" x 90" sawdust bin

446A
Torit Dust Collector
Model-VS-1200, SN-1G073652-5, 208/460, 3 phase, 3 hp

447
Carolina Metal Cutting Bandsaw
12" wheels, no blade, 1 PH, electric drive

448
New Oldstock Harnischfeger Electric Hoist
Model 12BD11A, serial # T66070, 4000 lb. capacity, 3 HP, 3 PH, 230/460 V, 19' 5" lift, 20 F.P.M., still on original pallet

449
Twin Disc Clutch
Model SP3145B1, serial # 2111006, 2 15/16" shaft

450
Pulleys
13 assorted V pulleys

451
Pulleys
12 assorted V pulleys

452
Pulleys
4 assorted V pulleys and bushings

453
Caster Wheels
4- 12" x 3 1/2" x 1" shaft, steel wheel with rubber, used

454
Bander
Orga Pack 3/4 banding tightener sealer combo with clips

455
Cooks Cat Claw Band Roller

456
Clutches
SP214P101, serial # 2103488, 4- 11060, serial # 891231, pallet of 2, possibly make 1 good one, 3 1/2" shaft

457
NACD Clutch
#434845AM, serial # 13654070, 2 3/4" shaft

458
NACD Clutch
#437455AM, serial # 08C29093, 3 7/8" shaft

459
Clutch
WPT # 211,serial # W05016207, rebuilt, 2 1/2" shaft

460
2 New Hydraulic Motors
Model BM 5-125

461
Like New 2 Hydraulic Motors

462
2 Used Sheffer Air Cylinders
6" x 16"

463
Rubber Coated Shafts
4- 3 1/2" x 44" x 1 1/2"

464
Ryobi Upright Bandsaw
Model BS-360NR  serial # 04108, 14" bandwheel

465
275 Gallon Oil Tank
With hose reel and pump, used for new motor oil

466
Oliver #450 Tablesaw
Serial # 60673, 10 HP, 3 PH, 24" blade

467
Hazeldene Single Head Notcher
Missing head, electric drive, as is

468
Whirlwind Upcut Saw
Model 2121, no blade, 5 HP, 3 PH

469
Airlift
4' x 5', with controls, Presto 2000 lbs. capacity, Ax20-4860

470
Pallet Wrapper
4 x 4 platform, 1/2 HP, 1 PH, condition unknown

471
Upcut Saw
6" cutting capacity, 24" blade, 3 PH, works good

472
Hydraulic Tank
36" x 24" x 36" hydraulic tank

472A
10 HP Hydraulic Unit*

473
Rolling Ladder
24" x 88" x 84", as is

474
Bulk Nails
44 box, 1 5/8" x .113 NP, 50 lb. box

475
Bulk Nails
34 box, 2 1/4" x .120, 50 lb. box pallet bulk nails

476
Plastic Wheels Casters
4" x 2 1/2", 4 3/4" high, 40 swivel, 40 rigid, brand new, 2 1/8" x 2 1/4" plate

477
Casters
100 PC used 3" x 1 1/4" x 4" swivel casters, 3" x 4" plate

478
2- Burroughs and 1 Victor Adding Machine
Condition unknown

479
RC Allen Cash Register, Remington Rand Adding Machine, Pay Master Check Writer
Condition unknown

480
Barrett, Sund Strand, Comptometer Manual Adding Machines
Condition unknown

481
S303 Easy Baler
With electric hoist

482
8 Ton Budgit Trolly with Chain Hoist
Good condition

483
Quincy 5120 Air Compressor
Serial # 5033310, was running when taken out of service

484
Meyer's Snow Plow
Model LP8.5, serial # 00191709402, 32" x 8' 6" blade, excellent condition

485
Meyer Blaster 750S Salt Spreader
Excellent condition

486
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

487
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

488
4" Black Tee Hinge
12 boxes of 100 pieces, heavy duty

489
4" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

490
5" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

491
Metal Roofing Screws
# 10 x 1 1/2 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 2000 pieces

492
Metal Roofing Screws
# 10 x 1 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 3000 pieces

493
Wood Screws
# 10 x 2, # 2 sq drive black wood/ hinge screws, 12 boxes of 2500 pieces

494
Wood Screws
# 10 x 2 1/4, #2 sq drive black wood/hinge screws, 12 boxes of 2000 pieces

495
Wood Screws
# 10 x 2, # 2 sq drive zinc wood/hinge screw, 12 boxes of 2500 pieces

496
Wood Screws
12 boxes of 2000 pieces, # 10 x 2 1/2

497
Grinder
1" arbor with 12" grinder on stand and 7" diamond wheel, no drive

498
Powermatic Sander
Model 30B, serial # 7930602, 10" disc, 6" x 22" belt sander, line shaft ready, works, well used condition

499
Metal Platform Scale
16" x 26" on wheels, 500 lb. capacity, and 10" x 13" table top scale collector type, condition unknown

500
Walk Thru Skid Steer Forks
48"

501
Walk Thru Skid Steer Forks
42"

502
Skid Steer Forks
48"

503
Skid Steer Forks
42"

504
Heavy Duty Skid Steer Forks
48"

505
Heavy Duty Skid Steer Forks
42"

506
Heavy Duty High Capacity Skid Steer Bucket
78" with bolt on cutting edge

507
Skid Steer Bucket
84"

508
Skid Steer Bucket
78"

509
Skid Steer Bucket
72"

510
Skid Steer Bucket
66"

511
Skid Steer Bucket
60"

512
Skid Steer Mulch/Snow Bucket
78"

513
Heavy Duty 2 Cylinder Brush Grapple for Skid Steer
72"

514
Heavy Duty Brush Cutter for Skid Steer
72"

515
Brush Cutter for Skid Steer
60"

516
Bale Spear
49" spear with 18" stabilizers, 3000 lb. capacity

517
Auger Head
2" hex output shaft, up to 48" bit capacity, does not include any bits

518
24" Hex Fab Auger Bit

519
18" Hex Fab Auger Bit

520
12" Hex Fab Auger Bit

521
Quick Attach Plate

522
Quick Attach Plate

523
Quick Attach Plate

524
Backhoe For Skid Steer

525
Quick Attach High Flow Trencher
6" x 48", with side auger, bullet teeth approx. 5 years old, only trenched approx. 5000', all in good working condition

526
25' Boom Extensions*
2020 Bobcat Attachment Skid Pro Boom extender for setting post and trusses, only used a couple times, like new

527
8" Montana Post Driver*
Model 1000 E, serial # JH7C025T-04181010, with 3" concrete breaker pin, ONLY 1 YEAR OLD

550
Wells Metal Saw*
14" cutting width x 11" deep adjustable angle, blade size 3/4" x 137 1/2", line shaft ready, works good

551
Saw Blade*
6 piece, St 3/4" x 137 1/2", 10/14 T brand new, fits lot 550

552
Puma Air Compressor*
With 5.5 Honda motor, condition unknown

553
Bolt Bin*
Metal pigeon hole, used, bolt bin is empty

554
Bolt Bin*
5 bolt organizers

555
Concrete Mixer*
#32 mixer with Briggs & Stratton motor, older but works

556
10 Assorted Air Cleaners*

557
3 Used Mufflers*

558
Chainfall Hoist*
1/4 ton cyclone CM chain hoist, 3 ton L-70 chain hoist, No 120 trolly

559
Blower*
4" inlet blower, 18" drum, line shaft ready, good condition

559A
Drum Blower*
Cincinnati fan model 30/TS, 16" drum, 14" fan, 3 HP, 3 phase

560
Orange CM Chain Falls*
Approx. 10' lift, 3 ton hooks

561
Porta Cool*
16'', 3 speed, model PAC2K163SFC

562
Metal Cabinet*
2 doors with shelves

563
Chain Falls*
Yale spur geared, 2 ton with trolley

564
Porta Plot Deer Feeder with Solar Panel*
31"x49"x57''

566
Gas Alternator*
Predator 212 cc gas motor with alternator to charge 12V batteries

1000

567
Heavy duty 5/8" Chain*
9' long with 1 hook

568
Used Goodyear Tires*
11 R 22.5, 5 ply, set of 4 

569
Used Goodyear Tires*
17.5 R 25, 

570
Used Titan Tires*
17.5 R 25, 3 pieces

571
Used Earthmax Tires*
20.5 R 25, 2 pieces

572
Assorted Power Tools*
Bosch sander, Stanley planer

573
Assorted Power Tools*
Black & Decker Sawzall, Milwaukee circular saw

574
Pitchfork and Posthole Digger*

575
Assorted Hand Tools*
Pry bars, chains, hammer, hay hook

576
Sears and Roebuck Table Saw*
Model 113-29920, serial # 1056, 10" blade, 30" x 40" top

577
Pipe Fitters Tools*

578
Delta Table Saw*
Serial # BU5937, 7" blade, 4" joiner
Photo Gallery

































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

Lake Erie Equipment Consignment Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:
Sale Location
4300 Kinsman Rd
Mesopotamia, OH 44439
Sale Dates and Times
Friday Mar 25, 2022 Completed
Sale Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.
 

00
Information Lot
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 ( jc2559@gmail.com) fax 440.693.4316. Consign early for maximum free marketing.

98
Manual Sealless Steel Strapping Tool*
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

99
Heavy Equipment Key Set 24 Keys*
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

100
Miller Bobcat 225 Welder
Serial # La257374, meter shows 1030 hours, runs and welds good, Kohler gas engine

101
48" Log Rite Cant Hook
Brand new, ch 048 cant hook

102
36" Log Rite Cant Hook
Brand new, PV036, peavy cant hook

103
30" Log Rite Cant Hook
Brand new, MS030

104
Handyman Jack
Model HM-485, brand new, 4660 lb. capacity, 48" tall

105
New Husqvarna 372XP
Serial # 2021 0900267, with 20" bar chain

106
New Husqvarna 395XP
Serial # 2019 2130900, no bar and chain

107
Used Husqvarna 395XP
Serial # 2017 2136050, with 24" bar and chain, works good

108
Husqvarna 395XP Chain Saw
Serial # 2017 1333122, with 24" bar chain, works good

109
Used Husqvarna 372XP Chain Saw
Serial # 2016 0200671, with 20" bar chain, works good

110
Thunder Boy Auger
Model Y43208, serial # 2016 03795, with 7" auger, like new

111
Fiskars 5 Piece Ax Set
New 36", 28", 23 1/2", 17", 14", all have lifetime warranty

112
Cyclone Chain Hoist
Chain falls 1 ton aluminum frame, good condition

113
Mousehole Anvil
5 1/4" x 24 1/2" x 11", 196 #

114
Master Mechanic Socket Set
3/4 drive, 21 piece set, like new condition

115
New DJM Pallet Jack
Brand new, 5000 #

116
Barrel of Chain
Approx. 350' 3/8" Gr. 30 chain, brand new

117
Knaack Portable Tool Box
On wheels, loaded with mostly USA quality tools, electric, air, wrenches, socket set, hammers, pipe wrenches, crescent wrench, vise grips, and lots more

118
1000 Gallon Air Tank
Refurbished

119
500 Gallon Air Tank
Refurbished

119A
Big Green Egg On Stand

120
Cooks Edger
2 blade 12 1/2", 3" x 26", 90" infeed, 48" outfeed live belt with 5" extension, 18' 6" overall length x 80" wide, hydraulic drive

121
HMC Vertical Edger
HMC model EV1, serial # EV10-26, 2- 20" blades, 30 HP, 3 PH electric drive, hydraulic adjustable, 230/460 V

121A
Hilltop Equipment Vertical Edger*
40 HP, 3 phase, 2-20" blades, self contained hydraulic pump, very good condition

122
Morgan Edger
22" x 3", 48" in and out power conveyor, 190" overall length, 36" overall width, has 1- 10" blade, could use some TLC

127
Belt Conveyor
24" x 128" conveyor belt, 12"-23" high, no drive

128
Lumberlift
4' x 6' x 4", hydraulic drive

128A
Steel Banding
1 skid of 12 roll, 3/4" x .031 H.T. banding metal

128B
Steel Banding
1 skid of 14 roll, 3/4" x .031 H.T. banding metal

128C
Steel Banding
1 skid of 24 roll 3/4" x .031 H.T. banding metal

128D
Steel Banding*
7 rolls, 1 1/4" banding

128E
Banding Cart*

129
Belt Conveyor
12" x 33', 6" x 42" tall conveyor, has 1- 4" side, 2 HP, 3 PH, electric drive

129A
2 Strand Live Deck*
28" x 30' 6", electric drive

130
Belt Conveyor
20" x 20' x 4" sides, 12"-80" incline conveyor belt, 3 PH, electric drive

131
Lumber Rolls
44" x 3 1/2" x 10' long, 32" high lumber rolls

132
Crossover Conveyor
Brewer Crossover, hydraulic drive, 36" x 96" x 36", 3 strand deck, 10" x 96" conveyor roll, hydraulic drive, 8" x 72" rolls, no drive

133
Belt Conveyor
14" x 10' angle, 6' 6" flat red conveyor, 5" sides, 72" high bottom, 57" high on top, 1/2 HP, 3 PH, electric drive

133A
Belt Conveyor*
8'' wide x 18' 6"

134
Lumber Rolls
56" x 84" x 30"

135
Belt Conveyor
36" x 35" incline conveyor, 23"-34" tall hydraulic drive

136
Roll Case
16", 16' long, 4 1/2" d. rollers, adjustable height 33"-42", no drive

137
Lumber Rolls
12" rolls, 84" x 25" x 64" Pre Feeder shop made, hydraulic drive

138
Belt Conveyor
Brewer 13" x 12' x 32" belt conveyor, no drive

139
Lumber Lift
42" x 87" x 19" electric hydraulic lumber lift, 3 PH electric

145A
Switch Blower Pipe*

139A
Lift Table*
40" x 48", 2500 lb. capacity, electric, condition unknown

139B
Lift Table*
36" x 52", electric, condition unknown

139C
Lift Table*
36" x 60", condition unknown

139D
Atlantic Kelly Hydraulic Lift
3 sections-18"x50", 2000 lb capacity

140
Belt Conveyor
24" x 11' incline conveyor, 12"-57", 8" sides, 1 HP, 3 PH electric drive

140A
Koger Air Lock*
Size 16, 2 HP, 3 phase

141
Kohler Natural Gas Generator
50 KW, 62.5 KVA, 91 original hours, has not run in awhile, condition unknown

141A
Belt Conveyor
20" x 8' incline conveyor, 6"-30" height, 2 HP, 3 PH, electric drive

142
Upcut Saw
PF model 90, electric drive

143
4 Cylinder Perkins Diesel Power Unit
With 5 HP air compressor and hydraulic unit with clutch on frame, meter reads 2132 hours, oil cooler

144
Switch Blower Pipe
2014 Imperial model IDV-10-12, serial # 2716, 10" inlet/outlet

145
Switch Blower Pipe
2014 Imperial model DV-14, serial # 2717, 14" inlet/outlet

146
Baker Stacking Rack
Model BSR-O, serial # 05-187, 84" x 84" x 72"

147
Pallet Chief Pallet Stacker
68" x 78" x 108", air operated, looks like excellent condition

148
Minneapolis 4 Cylinder Gas Engine
Serial # 620782 with clutch, flat pulley, hand or electric start, does not run

149
6 Cylinder John Deere Diesel
With clutch, meter shows 2218 hours, ran when taken out of service, but needs new radiator

149A
John Deere Power Unit*
Model M63HA, serial # 1090200, with hydraulic pump, runs

149B
Cat Power Unit*
Model 4CPXL07.2HSL, 3126 diesel, power unit 210 HP, with radiator and fuel tank, has new clutch with 12" 10c groove pulley, runs good

149C
471 Detroit Power Unit w/ Clutch*
Hours unknown, has all new seals and rings, head redone and ready for work, good clean unit

149D
John Deere Power Unit*
Model 4024TF270, serial # PE4024T011511, came off Maruka, runs good

150
Self Dumping Hopper
6 yard

151
Self Dumping Hopper
5 yard

152
Self Dumping Hopper
4 yard

153
Self Dumping Hopper
3 yard

154
Self Dumping Hopper
2 1/2 yard

155
Self Dumping Hopper
2 yard

156
Self Dumping Hopper
1 1/2 yard

157
Self Dumping Hopper
1 yard

158
Self Dumping Hopper
3/4 yard

1000

159
2- Nylon Binders
Model 2350, serial # 5589, plastic 1/2" banding tightener/sealer

160
Strap Binder
Model 2309, serial # 1018t, air 1/2" plastic tightener/sealer, size 13

161
Strapping Tool
Model 2314, hand tightener/sealer combo, 3/8" thru 3/4" for plastic banding

162
2- Gerald Metal Sealless Strapping Tools
For 5/8" steel banding

163
2- Gerald Banders
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

164
Gerald Bander
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

165
Banding Tools
9 assorted sealers, 3 tighteners, assorted sizes

166
Banding Tighteners
3 Banding tighteners up to 3/4", like new condition

167
Banding Sealers
4- 3/4" sealers, 2- 5/8" sealers, used but like new condition

168
Gerald Sealer
Model 630, 3/4" heavy duty, works good, with pusher seal

169
Banding Sealers
4- 3/8" , like new condition

170
Banding Tools
2- 1/2", 1- 5/8", 1- cutter, fair condition

171
Banding Sealer
1 3/4", double notch, good condition

172
1 1/4" Banding Tools
3- 1 1/4" sealers, 2- mip 1400 tighteners

173
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

174
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

175
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 2 chargers, works

176
Air Banding Tools
Fromm air tightener, Fromm air sealer, Aero-motive Balancer, condition unknown

177
Cornell Conveyor
28' x 13 1/2" live belt conveyor, 1 HP, 3 PH electric motor, controls are 30" tall, 17" wide x 35" tall

178
Log Turner
30", good cylinders, hydraulic drive

178A
Deduster*
8", no drive, 5" x 56" conveyor belt, 8" x 9" brush wheels

179
Unscrambler
No drive

180
Sawdust Bin
73" x 111" x 120" saw dust bin, 5-18" outlet, 10" inlet, 88" tall bottom

180A
Sawdust Bin*
5 x 7 x 9, with hydraulic auger, 36" drum, 15" inlet, 11 x 13 outlet, 8 1/2" wide paddle in good condition, hydraulic blower, mfg. by Yoder Hydraulic

181
Cornell Slab Saw
30" blade, 13 HP drive, 18" x 48" outfeed conveyor, 18" x 12' infeed conveyor, unit works, but will need some help

181A
The Summit Slab Saw*
36" blade with Kohler 27 HP gas motor, 18" x 60" live conveyor, 18" x 102" infeed conveyor, made by Hershberger Mfg.

182
Morbark Chipper
Model 13, 20" roll, Perkins diesel with clutch, 56" wide infeed, 60" long, meter shows 820.7 hours

182A
Beloit Passavant Stationary Chipper*
Model 1048-20-D, serial # 50325-01, 48" wheel, 18" x 21" inlet, 12" x 12" outlet

183
52" F Saw Blade
Works but need attention

184
Phelps Blower
24" drum blower, has good paddles, belt drive, 8" inlet

185
Frick Husk with Mandrel

186
All Old Saw Blades

199A
Steel Lumber Dipping Tank*
6' x 6' x 20' x 1/2" thick

187
Lumber Rolls
11 piece 12" used lumber conveyor drive rollers and 1 new roll morse, C-2060H conveyor chain

187A
Self Dumping Hopper
3/4 yard, used

188
Self Dumping Hopper
3/4 yard, used

189
Self Dumping Hopper
1/2 yard, used

190
Self Dumping Hopper
1/2 yard, used

191
Honeyville Blower
Model HF26, serial # 26987, 26" inlet/outlet, has good paddles, no drive

192
General 10" Blower
Serial # A-8950, 7" inlet, 6" outlet, no drive

193
Dayton Blower
15" air circulation, 16" intake, 12" x 16" outlet, no drive

193A
Bruning & Federle Blower*
Model JJ 26 2186, date 8-6-01, 60" drum, 19" x 45" paddle in good condition, no drive, 14" x 6 groove pulley

193B
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, connector, elbow, 6" to 18"

193C
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, miscellaneous 6" x 24"

193D
Blower Pipe Fittings*
44" x 56" x 42" box full of pipe clamp rings and miscellaneous fittings, elbows, reducer, wyes

216
Yanmar 60 Track Forwarder
24" x 12' tracks are 90%, 8' log deck on back, 101" x 15' x 122" tall overall, with picker, Yanmar diesel model 4T112TL-FW, 130 HP, meter shows 2930 hours

193E
Blower Pipe*
Skid of blower pipe, reducing wye, manifold, reducer, elbow

193F
Line Shaft Coupler*
3 1/2" reduces to 2 1/2"

194
Hytrol Belt Conveyor
32" x 7', 28" tall, adjustable height, 3 PH, electric drive

195
Webster Vibrating Chute
Model FSM, serial # 892-3641-1, 24" x 20' x 7" side, no drive

195A
Expandable Conveyor*
24" x 6" x 30" flexible conveyor, expands to 19' long, 44" high, on casters, good condition

196
Whirlwind Upcut Saw
Model 212R, serial # 1881M52R, 18" blade, 10 HP, 3 PH, with 14" x 10' conveyor with 5 stops

196A
Hydraulic Lift*
Model P-72-040SF, serial # 98526-2, American 4000 lb. capacity lift, air/hydraulic lift, 31" x 64" x 19" plus 3" steel channel on top on 6" swivel caster

197
Steel Banding
3/4 x .029 high test metal banding, 12 rolls over 1200 lbs.

198
Self Dumping Hopper

199
Self Dumping Hopper

247

199A
Mellott Rollcase*
24" x 23', 6 1/2" rolls, hydraulic drive 

199B
Mellott Rollcase*
24" x 24', no drive

199C
3 Strand Transfer Deck*
7' x 10' x 60" high, hydraulic drive

199D
Meadows Log Turner*
Serial # LT-0056-98

199E
Drop Deck*
3' x 20' slant drop

199F
Drop Deck*
67" x 20' slant drop deck 

200
Meadows Portable Mill
56" F style, 2 air dogs, 12' carriage, 40' track, air dogs, receiver, log turner

201
Wood-Mizer LT40 Portable Bandmill
VIN 456A42410RIFE6037, 1994, 18 HP Briggs motor, has new wheels, meter reads 179 original hours, approx. 25' long

202
Wood-Mizer LT25 Portable Bandmill
VIN 456822019VENEC6678, 1998, Kohler 15 HP motor, approx. 22' long, has only cut approx. 10,000 board foot, but was stored outside under tarp, motor just rebuilt

203
1/25 Wood-Mizer LT40 Bandmill
New, fully hydraulic sawmill

204
Band Sharpener
Electric, very little use

205
Single Tooth Setter

206
Corinth Left Hand Portable Saw
3 head block, 52" f pattern with 7" blower, 16' carriage, 34' track, 14" x 9' live belt conveyor, older saw but works good

207
Hand Filer, Saw Wrench, and Swedge

208
New Eagle Claw Teeth
Box of 100

209
Detroit Left Hand GM471 Diesel
Rebuilt clutch, runs good, has minor oil leak, new radiator, alternator model 4045C, serial # 35080, meter reads 2498 hours

368

210
Double Tooth Band Setter*
# 080-214, sets up to 3" bands, like new condition, made by Hershberger Mfg.

369

211
4 Lumber Tiger Carriage Head Blocks

370

212
Setworks for Lumber Tiger Carriage
1 complete set, 1 partial set for parts

214
Hendrick 14" Panel Saw*
2 extension tables, 4' x 12' and 4' x 8' 4", looks good but condition unknown

215
Double End Trim Saw
Speed saw, 3 ph., 240 V, electric drive, 102" wide x 29' long x 40" tall

216A
Steel Dump Bed*
7' x 7' w/ fold down sides and tailgates, good condition, came off Maruka, does not include any contents

216B
Maruka Hydraulic Knuckleboom*
Model 31191020010, serial # 040565, needs kone new seal. otherwise in good condition

217
John Deere 548E Skidder
Serial # DW548E5535469, meter reads 6426 hours, JD 4045 engine, 86" blade, winch with 50' cable, runs good

218
Franklin 170T Cable Skidder
Serial # 16737, 88" x 28" blade winch, meter reads 4522 hours, 23.1-26 tires 90%, Cummins diesel # 60207739

219
Skidder Tires
18-4 34 tires off of 540 , good rims, 10% rubber

220
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220A
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220B
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220C
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220D
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220E
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

221
J.D. 455E Crawler Loader
Serial # TO455EX739737, good 15" tracks, 6" x 48" forks, with winch, under carriage 55%

222
2014 Bobcat T650 Skid Steer
Serial # A1JG11189, 18" tracks, 80" heavy duty bucket, all new fuel system 200 hours ago, meter show 4698 hours, tracks 90%, good sprockets, very good machine

222A
2006 JCB Telescopic Loader
Model 52755, around 4000 hours, 6000 lb. capacity, foam filled tires, skid steer quick attach and hydraulic couplers, good working condition

223
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 month ago, comes with 3 phase charger

224
Skid Steer Tracks
Tracks came off case 85XT, but will fit more, 18" wide, 82" log tracks, 90% rubber, frame looks in good condition

224A
Rubber Case Skid Steer Tracks*
18" wide, 80" long, Approximately 50% tread, Off of Case TR320

225
Cat Crawler Loader
955 Cat, 1978, approx. 4000 hours, under carriage about 30%, tracks about 70%, no leaks, runs good, with bucket, hour meter not working

226
Hyster D4 Crawler Winch
Works

226A
Ramsey 208 Winch*
Model J10R, 10,000 lb. capacity, PTO drive, condition unknown

227
Rubber Tracks
Used, off of Bobcat 300, 18" wide, approx. 40% rubber

228
Metavic Log Wagon
Serial # ETI7RF180908125, with 13 HP Honda motor, air tires, 6 wheel, one wheel needs new bearing, good condition

229
916 Cat Loader
Serial # 2XB01323, with 1.75 yard bucket, weights 24,200 lbs., 17.5-25 tires 40%, meter reads 2327 hours, runs very good, has weak transmission

229A
1994 Komatsu WA180-1 Wheel Loader*
Serial # A75547, meter reads 21975 hours, good working condition 

229AA
Clark Loader*
45C-PK loader, serial # 439B121CB, meter shows 4635 hours, runs good

229B
Bucket For Komatsu*
2.25 yd. 96" wide

229C
Forks For Komatsu*
46"

229D
Set of Four Used Tires*
17.5-25, very good condition

230
2007 Elgin Pelican Street Sweeper
John Deere 4045T Power Tech diesel, meter reads 7245 engine hours and 24,050 miles

231
JLG 8042 Sky Trak
Serial # 0160051832, 2013, 8000 lb. capacity, 42' reach, 4" x 48" forks, foam filled tires 60%, Cummins diesel engine model QSB3.3, 100 HP, meter reads 2978 hours, very good condition

232
Toyota LP Forklift
Model 7FGU32, serial # 70343, 6000 lb. capacity, solid pneumatic tire 80%, side shift 88" lowered mast, has cab with 2 door, heat, fan, lights, 500 hour on new motor but has broken timing cover. ENGINE DOES NOT START ANYMORE. WE DON'T KNOW WHAT THE ISSUE IS.

233
Linde H25D Forklift
Serial # H2X393U02651, 4655 lb. capacity, bald tires, 88" lowered mast, meter reads 12,000 hours, rebuilt head gasket, new timing belt

234
Cat 267B Skid Steer
Serial # Cat0267BHCYC01032, with hitch and 7' bucket, meter reads 3552 hours, tracks 80%, no oil leaks, very good machine

235
John Deere 455E Crawler Loader
With carco 28 winch, meter reads 13534 hours, 6' x 44" forks, has oil leak between winch and transmission, good machine, like new under carriage

235A
Used 450 Case Crawler/Dozer Parts

236
Riding Floor Sweeper

237
Stanley 350 Jackhammer
All new seals

237A
Jack Hammer*
large, works, will fit 125-200 excavator

238
Case 1816 Skid Steer*
60% rubber, 27 x 8.50-15, 42" bucket, Tecumseh gas motor, meter reads 495 hours, runs good but need clutch rebuilt

239
Bobcat Steel Skid Steer Tracks*

240
Walk Behind Burro Donkey Truck Carried Forklift*
Model B13-3K, serial # EU, code # 2HanXXDDBHHAUXXXEA5, electric start, 13 HP, Honda hydraulic drive, 3000 lb. capacity, weighs 1963 lbs., runs good, forward/reverse handle needs work

241
1998 New Holland LX665 Skid Steer*
Hand controls, SN-852052, Hours unknown, 64" quick attach bucket

242
Forks*
6" x 44", quick attach, 70" overall, fits Komatsu 200 wheel loader, has crack in frame

243
Forks*
6" x 48", will be repainted

243A
Extension Forks*
6" x 6'

244
1985 Case 580E Tractor with Backhoe*
80" bucket, 36" backhoe bucket, Includes extra 16" bucket for backhoe, PIN-17026296, Meter reads 2555 hours

245
2007 John Deere 320 Skid Steer*
PIN T00320A150478, includes 70" bucket, quick attach, hand and foot controls, 52 HP engine, meter reads 2639 hours, 32" solid rubber tires, good working condition

246
Skid Steer Wheels*
12-16.5, air tires, 8 lug, came off lot 245

250
International 340 Utility Tractor
Model 340 utility, serial # 7121P-X-Y, 3 point does not work, runs rough

251
Farmall Super M Tractor
Model A, serial # FAA53637, original paint, runs good, 70% thread, a little dry rot

252
Farmall A Tractor
Runs good

253
Farmall H Tractor
Model H, serial # FBH 377207X1, tires 12.4-38, 50%, a little dry rot, no pulley, has draw bar and PTO, should be running by sale day

254
Farmall Cub
Model F-Cub, serial # 159269, new rear rubber, 1 new front rubber, 6 V, 8.3-24/8-24 tire with 54" snow blade, mostly rebuilt and restored, lights work

255
John Deere 430
Model 430-W, serial # 142788, has PTO, 3 point hitch, 2 cylinder gas, 13.6-28 tire on 12" rim, 70% tires

256
John Deere 40 Tractor
Model 40-S, serial # 64346, 2 cylinder, gas, 6 V, 11.2-24 tires 95%, 3 point works PTO, is scheduled to be repainted before auction

257
John Deere 1950 D
Model D, serial # 188725, repainted, runs good, has 1 hole in right fender, came from Georgia, tires 60% tread, a little dry rot, steering column has oil leak

258
1/16 Scale John Deere D
Model D, new in box

259
1/8 Scale John Deere D
1939, Model D, new in box, 75th anniversary signed by Joseph Ertle, manufactured in USA

260
John Deere A
Model A, serial # 596504, runs OK, original paint came out of Georgia, 13.6-28 tire thread are 50% but dry rot holds air

261
New Holland TC35 Tractor
Serial # G609922, with loader and quick attach bucket, 4WD industrial tire, meter reads 980 hours

262
2017 Kubota MX5800HST Tractor w/ Front End Loader*
Model MX5800 with loader and bucket, 2017, meter shows 190 hours, as close to new as you'll find them, excellent condition

263
Ford Tractor*
8N tractor, not running

263A
3 Point Danuser PTO Auger*
4"-8" auger, 6" is bent

264
Plow*
5 bottom plow

265
Disc*
10' disc

266
Disc*
12' disc

265A
Allow Chalmers Cultivator*
19' 6"

266A
Hay Wagon*

267
Allis Chalmers Tractor*
WD 45 gas tractor, 6 cylinder, PTO, belt pulley, snap coupler 90% rubber, engine model #G-230, serial # 397291, approx. 70 HP, good solid running tractor, no oil leaks

268
1972 Ford 5000 Tractor*
5' side attach bush hog, Hydraulic tank, 3 point hitch, 8 speed transmission, Meter reads 456 hours

278
2000 GMC C7500 Truck, VIN # 1GDJ7H1B7YJ522494*
Year: 2000
Make: GMC
Model: C7500
Vehicle Type: Truck
Mileage: meter reads 138,992
Body Type: Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 7.4L; MFI; High Performance
Fuel Type: Propane
VIN #: 1GDJ7H1B7YJ522494

Features and Notes: RUNS ON PROPANE, has flatbed w/ gooseneck hitch, 87" x 9' bed, 7 leaf spring, good running truck

279
2000 GMC Dually Bed*
Fits Lot 278

280
GMC Service Truck*
1990, 10 speed with 1995 aluminum service body bed with generator, 143,500 miles, Cat 3116 Diesel engine, runs good, under CDL, very good rubber, with title

281
Flat Bed Truck*
1974 Ford 900 cab over 5 speed manual transmission, 46,341 original miles (model C904K), this truck was bought new by the city and was only used as a paint truck, has title, runs good but has damaged radiator

281A
1981 Chevrolet C60 Dump Truck, VIN # 1GBJ6D1A4BV120864
Year: 1981
Make: Chevrolet
Model: C60
Vehicle Type: Truck
Mileage: meter reads 45,017
Body Type: Medium Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 5.7L
Fuel Type: Gasoline
Transmission: 5 speed manual
VIN #: 1GBJ6D1A4BV120864

Features and Notes: GVWR 24,000 lb. 

281B
Valley Ford Dump Bed*
8' x 10' x 40"

282
36 Volt Taylor-Dunn Electric Go Cart*
42" x 76" flatbed with hitch, new lights and wiring, 124" overall length, 5.70-8 wheels

282A
Cushman Motorized Cart
Model 898530-8310, has dump bed, new carb in 2020, needs batteries, not in working condition

284
*Job Site Trailer
8' x 30' office trailer with heater, A/C, power box, 2 doors, looks to be in good condition

285
Pup Trailer
15" x 8' tandem axle, all new brakes, Busking and walking beams, has title

286
Tree Shear with Accumulator
20", 88" wide, 57" deep, 74" tall, came off 549 JD, can be adapted to almost any machine

287
Equipment Trailer
78" x 16' long x 18", black trailer, 54" tongue with pintle hitch, double axle, 2- 15" x 55" ramps, could use some repairs

288
Equipment Tilt Trailer
72" x 17' 6" x 18", 5' long tongue with pintle hitch, 94" over fenders, rear axle broke in half, may need other repairs, double axle trailer

289
Homemade Trailer
76" x 16', double axle, 3' tongue, 12" sides, 2 5/16" ball, no ramps

290
2- Trailer Ramps
16 3/4" x 10' long, 5 1/2" high

291
Trailer
6' 4" wide x 16" double axle shop built trailer, 3" steel side 10" wood side, new jack, tires 85%, trailer in good condition

292
Dump Trailer
2013 Low Pro 24" deck height, 14,000 lb. GVW, 7 x 12 double axle, 2 ramps, 80% tires, has title, has tail gate option, new battery, good condition

293
2007 Universal 2 Horse Trailer
Model ML7X11WTZ, VIN 16HPB11227K014227, with tack room interior, LED lights, 80% tires, steel frame, aluminum body, good condition

294
Equipment Trailer*
97" x 20' flat, 6' dovetail, 2 ramps, dual tandem axle, 80% tires, 20,000 GVW, frame looks in good condition, no contents

295
Enclosed Trailer*
Serial # WC-7235000 with aluminum ladder racks, tandem axle, 69" x 144" inside dimensions, 70" tall side door, 64" x 63" double doors, very good condition, like new wheels, road ready

296
Enclosed United Trailer*
68" x 123" x 70" inside dimensions, with new spare tire, 50 % tires, aluminum ladder racks, 64" x 66" double door opening, nice condition, road ready, single axle

296A
Flat Bed Trailer*
78" x 166" tandem axle, has dry rot wheels, no ramps, nice shop built trailer

296B
Speed Lift Portable Loading Dock*
Model SL6000-B EWP68 RFS, 6000 lb. capacity, 230 volt, 3 phase, 68 1/2" x 96", with 41" and 48" end plate

297
Yellow Pine Steps
Notched stringers and threads, 40" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

298
Yellow Pine Steps
Notched stringers and threads, 40 1/2" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

299
Storage Barn
Rustic 8' x 10' x 92", peak height 114", 56" x 72" double door, with clear coat sealer, shingle roof, yellow pine floor, brand new

299A
Rustic Playhouse*
6' x 10' rustic playhouse with 6' x 42" porch, 3 window, shingle roof, 2 x 8 yellow pine flooring, 22" x 54" door, has clear sealer

300
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

301
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

302
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

303
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

304
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

305
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

306
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

307
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

308
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

309
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

310
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

311
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

312
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 12" high

313
New Servo Motor
2 Kinetex servo motor, 1850 RPM, 480 V, 3 PH

314
Used Servo Motor
3 PH, 480 V, 3200 RPM

315
Hydraulic Cylinder
3 new Parker, model PX115-030-52, electric hydraulic, cylinder

316
Baldor 3 PH Motor
New, 20 HP, 230/460, 3 PH, 1170 RPM, 286T frame, 1 7/8 shaft

317
Air Cylinder
New

318
Air Cylinder
New, 10" bore x 1.00 air cylinder

319
Schmidt Air Press
New, 2" stroke, 9460 lb. capacity

320
Die Lift Cart
Dayton 880, manual hydraulic lift, like new

321
Weld Rabit Gas Welder
With 13 HP Honda motor, with 25" cables, works good, 1- 30 Amp outlet, 2- 115 V outlet

321A
Welder*
Electric Lincoln, 250/250

321B
Lincoln Welder*
Ideal Arc R35-325, serial # AC431961, code 7841-AR, no leads

322
Enco 8" Machinist Vise
Enco model 425-7281, 8" swivel vise

323
Bolt Bins
12 bolt bin organizers with hardware

324
Niagara Circle Cutter
1952 Niagara circle shear and punch, 1 1/2 HP, 3 PH

325
Excalibur Sliding Extension Table
Excalibur left hand, off of saw stop, 26 1/2" wide, 80" deep, 34" tall

325A
Metal Table
30" x 96" x 36", metal work bench

326
Clutch
Off of a 4 cylinder Ford motor, 2 1/4" shaft

326A
Prentice Bro's #2 Drill Press
Variable speed, 110/220 volt, 1 ph., 1/2 HP

327
Newman 8-B Moulder/Planer
24" wide, 14" planer, 4 head moulder, log cabin siding, all in 1 unit, 5' wide, 10' long, line shaft ready, with approx. 300 extra cutters and heads

327A
Party Tent
Model TMG-PT2020F, 20' x 20', fully enclosed, 18Ga 1 1/2" tube frame

328
General 10" Table Saw
Model 650, with 53" fence, no drive

328A
Propane Storage Rack
44" x 29" x 70", 3 shelves

329
6" Cornell Blower
Line shaft ready

329A
2006 Genie Superlift
Model SLC-15, serial # SLC07-37841

330
2002 Reliant Shaper
Model DD34, 1/2" and 3/4" spindle, air motor hookup

330A
Metal Job Site Box
24" x 72" x 26" metal job box

331
Grizzly Sander
9" disc, 6" x 24" belt sander, line shaft ready

331A
Gardner Denver Air Compressor
Model Bra-3G, serial # R7016797, 30 HP, 3 PH, 230/460 V, works

332
Generac LP Generator
Model 0043902, serial # 3844729, 120/240 AC, 15,000 watts, 125/62.5 Amps, 1 PH

332A
2018 Husqvarna 390XP Chainsaw*
Works good but needs new trigger cable

333
Husqvarna 576XP
Serial # 2009 4600001, with 20" bar, heated handle, works good

334
Wilton Drill Press
Model 5810, serial # 24121, variable speed, 1 HP, 1 PH, 120 V, works good

335
Kohler Generator
Generator model 100RZ282, serial # 355752, natural gas, meter shows 1574 hours, was working when taken out of service Nov. 2021, 100 KW, 125 KVA, motor model LSG-8751-6005-A, serial # 04789 A-05-RA,

336
New Clifford Anvil
125 #

337
New Clifford Carroll Wide Face Anvil
70 #

338
New Clifford Carroll Anvil
70#

339
New Clifford Carroll Anvil
30#

340
Miller Welder
Serial # KK001873, BIG40G propane welder, 120/240 V, 1 PH, original 647.4 hours, continental 3 cyl tm 20, works and welds good

341
Miller Welder
Serial # KC320338, BIG20G welder, meter shows 3441.4 hours, 4 cy Continental gas motor model Y112, runs good with leads

341A
Portable Exhaust*
Model 7E10DD41, serial # 1002054, E-Z ARM Air flow system, meter reads 3570 hours, year 2001, for welding

342
Pallet Jack
EP55, 20 1/2" x 48", 5500 lb. capacity, works good

343
Pallet Jack
Crown, 27" x 48", 5000 lb. capacity, very good condition

344
Banding Cart
Almost full roll of 3/4" steel banding and tools

345
Kreg Jig
K3 pocket hole system with 3 drill bits

346
Rigid Pipe Threader
Model 300, serial # 7615559, on tripod stand, 1 PH, 115 Volts, works good

347
Rigid Pipe Threader
Dies from 3/8"-2", all in good working condition

348
Pipe Fitters Box
Loaded, all in good working condition, tubing benders, cutlers pipe wrenches, soldering

349
Socket Set
3/4" drive, Tekton 8 piece impact socket set, 2 1/16"- 2 1/2", like new

350
Belt Lacer
Model 9, serial # 027369, 6"

351
Stihl 038 Chain Saw
Model 038, 24" bar, works good

352
Box Stapler
2 cc carton/box stapler with staples

353
2-Hillman Machinery Moving Skates
With handle

354
Milwaukee Jack Hammer
Model 5332, electric jack hammer, with 1 bit, works

355
Bucket of Chain
1/4" x 100' Gr. 30 Proof coil zinc coated chain, new in bucket

356
CM Chain Hoist
Model 5, serial # 384BS, 2 ton aluminum, works good

357
Polyester Rope
New, 1/2" x 600' spool blue/white rope

358
Bearings
16 pieces 1" flange bearing, 20 piece 1" pillow block bearings, all new

359
Flange Bearing
37 piece, new 1" flange bearings

360
Pillow Block Bearings
30 piece, new 1" pillow block bearings

361
Baker's Choice Wood Stove
Serial # 128935, takes 6" stove pipe, 12" x 12" oven door, 7 3/4" x 10" fire door, 5 1/4" x 10" ash door

362
New Line shaft Welder
Cheetah 250-5.5, serial # 31028, generator welder with 30' welding cable, 25' ground cable, 1 box 1/8" welding rod and used helmet

363
30 LB. Assorted Welding Rods
7018-6010-6018

364
Moak Shaper
Serial # 8465, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

365
Moak Shaper
Serial # 6938, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

366
Air Tank
Approx. 2000 gallon, approx. 80" tall x 76" wide x 170" long, good condition

367
Gravity Box
120" x 87" x 60", was used for coal storage, in good condition

368
Thompson PW-500 Sewing Machine
Walking foot for industrial materials, canvas, buggy oil cloth, in good working condition

369
Tool Cart
26" x 20" x 52", with 4 shelves loaded with paint, oil, and miscellaneous

370
2- Parts Cabinet
Nice clean cabinet, includes blades, screws, miscellaneous

371
Lincoln Electric Motor
25 HP, 230/460 V, 3 phase, 3485 RPM, 256T frame, 1 5/8" shaft with control box, was working when taken off 2 years ago

372
300 Gallon Red Fuel Tank
Mounted on steel sled frame

373
Set of Forks

374
Honey Locust Live Edge Slabs
10 pieces, 1 3/4" x 9' long up to 48" long, kiln dried, planed

375
18' Windmill
Assembled

376
28' Windmill
Brand new in crate

377
Toy Windmill
Miniature, works, 17" tall, toy only

378
New Bolt Bin
Gr. 5 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

379
New Bolt Bin
Gr. 8 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

380
Pallet Jack
Model PE3520-60, serial # 6A143709, 9" x 11' forks, 14' 4" overall length, 35" wide, 24 V, meter shows 6113.6 hours, 4500 lb. capacity

381
Pallet Jack
Model PW3520-80, serial # 6A231514, 9" x 72" forks, 9' overall length, 34" wide, 3 1/4" lowered, raises to 9 1/4", 3630 lb. capacity, battery looks good, meter show 405.4 hours, 24 V

382
Battery Lift
Model 15B-S, serial # IA101048, 12 V crown lift, 1500 lb. capacity, new battery, 75" lifting height, 4 1/2" x 26" forks, needs new front wheels

383
Exide Gold Battery Charger
Model WG1-12-550, serial # OH126791, 24 V charger, 208/480 V, 3 PH, works with lot 380 and 381

384
Fuel Tank
48" x 70" x 80" tall, good condition, on stand with hose and nozzle

385
Fuel Tank
30"x 60", good condition, with hand pump, meter, and filter

386
Fuel Tank
30" x 60", good condition, was used for gas

387
Oil Tank
48" x 70", good condition, was used for new motor oil, is empty

388
Oil Tank
38" x 61", good condition, was used for new motor oil, is empty

388A
Fuel Tank*
250 gallon

388B
Fuel Tank*
250 gallon

389
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

390
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

391
Air Compressor
1993 Leroi 175 CFM screw compressor with John Deere 3179 motor, meter shows 2462 hours, new battery, 33" x 82" x 52" frame

392
2- Scotts Lawn Mowers
16", old but in good condition

393
Silent Reel Push Lawn Mowers
18" and 21", good condition

394
2- 18" Fiskars Push Lawn Mowers
Good condition

395
Harris 2101 Torch Set
With 2 tanks and cart, condition unknown

396
Welding Table
35 1/2" x 86 1/2" x 32", with 1 1/8" top, on heavy casters

397
Metal Work Bench
36" x 114" x 34", with 3/16" thick metal top

398
Anvil
3 3/4" x 28 1/4" x 9 1/2", very good condition

399
Blacksmith Forge
32" x 41"x 7", with Royal Western Chief Blower, blower works, frame may need some sheet metal work

400
Anvil
5" x 29 1/2" x 13", good condition

401
Blacksmith Tongs
4 assorted, 40"

402
Blacksmith Tongs
6 assorted, 20"

403
Blacksmithing Sheet Metal Shear
36"

404
Vise and Drill Press
5" Post Vise Complete Columbian Cannedy-OHO MFG post drill #10 1/2

405
Compound Miter Saw
Serial # 18892043012695, Milwaukee fuel, 12" sliding compound miter saw, 2021, like new condition, tool only

406
Milwaukee Battery
12 Amp, brand new

407
Milwaukee Battery
5 Amp, 2 pack, brand new

408
Stihl 041 Farmboss Chain Saw
Serial # 8440591, 20" bar, works good, collector style

409
Stihl 041 Collector Saw
Serial # 2689207, 20" bar, chain runs, nice

410
Stihl 050 Collector Saw
Serial # 2822424, 20" bar, handle bar is cracked, but works good

411
Cordless Makita Skill Saw
Model XSR01, serial # 0284717, 7 1/4", brand new, with charger and bag, 36 V, no batteries

412
Staples
15 case, 20 box per case, 3/8" contractor staples

413
Finish Nails
41 case, 12 combo pack per case, 23 ga combo pack, 5/8", 3/4", 1 1/4", 1 3/8",

414
Flange Bearing
130 F35212ECS, 3/4", brand new

415
Maytag Winger Washer
Rebuilt with electric motor

416
Wells Metal Cutting Bandsaw
3 PH, 3/4" blade, 7" cutting width, 5" depth, good condition

417
Heat Exchanger
34" x 32" x 10", oil cooler, hydraulic drive, works good

418
3- Laminated Work Bench Tops
30" x 72", like new condition

419
Butcher Blocks
2- 42" x 84" x 2 1/4" pine, 2- 42" x 62" x 2 1/4" maple, all came from bowling alley

420
New Assorted Truck Lights and Miscellaneous
Whole crate full

421
5- Angle Gear Boxes
New 2012, 2 3/4" shaft- 1 3/4" shaft

422
3 Used Hydraulic Motors
1- Char Lynn 101-1016-009, 1- Char Lynn 101-1008-009, 1- red, good condition

423
Gas Air Compressor
15 HP gas engine, has new battery, electric start, runs good

424
Stihl Blowers
Backpack BR600 blower, handheld BG85C blower, both work good

425
Honda 3" Trash Pump
Works good

426
Speedi Cut Concrete Saw
Model SC7314, serial # 07031010878, 12"

427
23 Spools Electrical Wire on Rack
6, 8, 14 Ga and more

428
Kennedy Tool Chest
44" x 22" x 39", on wheels, good condition, 10 drawers total, empty

429
Socket Set
3/4" drive, mostly snap on, Proto

430
Hub City Right Angle Gearbox
Model 800, 1 1/2" shaft, 1-1 ratio

431
Siemens SQD Electric Boxes and Miscellaneous Electric Switches

432
1 Fostoria and 1 Stainless Steel Breaker Box
Fostoria model FPC46348A, 200 amp, 480 V

433
Crate Full of Used Electrical Boxes and Miscellaneous

434
6- SQD 100 Amp Breaker Boxes

435
Air Champ Air Clutches, Miscellaneous Air Regulator/Switches

436
Air Motor
60-1 gear box with air motor, 1- AM432 air motor and miscellaneous air regulator

437
5 Miscellaneous Electric Drive Gear Boxes, Speed Reducer, Reliable 56/150-10 , Flexiline 50-1, Boston 40-1

438
Ge 100 Breaker Box and Big Electrical Box

439
10" Metal Cutting Chop Saw
With blade, 1.5 HP, 1 PH

440
Reznor Natural Gas Heaters

441
Reznor Natural Gas Heaters

442
Reznor Natural Gas Heaters

443
22" Centrifugal Ventilator
2 HP, 1 PH, belt drive

444
Oliver Cutoff Saw
Model 94-DH, serial # 97756, 3 PH, 7.5 HP, 240 V

445
Smithway 1" Spindle Shaper/Router
Model # CO1F, serial # 205, 5 HP, 3 PH, 230/460 V

446
Toritz 6" Cyclone Bin
With 37" x 37" x 90" sawdust bin

446A
Torit Dust Collector
Model-VS-1200, SN-1G073652-5, 208/460, 3 phase, 3 hp

447
Carolina Metal Cutting Bandsaw
12" wheels, no blade, 1 PH, electric drive

448
New Oldstock Harnischfeger Electric Hoist
Model 12BD11A, serial # T66070, 4000 lb. capacity, 3 HP, 3 PH, 230/460 V, 19' 5" lift, 20 F.P.M., still on original pallet

449
Twin Disc Clutch
Model SP3145B1, serial # 2111006, 2 15/16" shaft

450
Pulleys
13 assorted V pulleys

451
Pulleys
12 assorted V pulleys

452
Pulleys
4 assorted V pulleys and bushings

453
Caster Wheels
4- 12" x 3 1/2" x 1" shaft, steel wheel with rubber, used

454
Bander
Orga Pack 3/4 banding tightener sealer combo with clips

455
Cooks Cat Claw Band Roller

456
Clutches
SP214P101, serial # 2103488, 4- 11060, serial # 891231, pallet of 2, possibly make 1 good one, 3 1/2" shaft

457
NACD Clutch
#434845AM, serial # 13654070, 2 3/4" shaft

458
NACD Clutch
#437455AM, serial # 08C29093, 3 7/8" shaft

459
Clutch
WPT # 211,serial # W05016207, rebuilt, 2 1/2" shaft

460
2 New Hydraulic Motors
Model BM 5-125

461
Like New 2 Hydraulic Motors

462
2 Used Sheffer Air Cylinders
6" x 16"

463
Rubber Coated Shafts
4- 3 1/2" x 44" x 1 1/2"

464
Ryobi Upright Bandsaw
Model BS-360NR  serial # 04108, 14" bandwheel

465
275 Gallon Oil Tank
With hose reel and pump, used for new motor oil

466
Oliver #450 Tablesaw
Serial # 60673, 10 HP, 3 PH, 24" blade

467
Hazeldene Single Head Notcher
Missing head, electric drive, as is

468
Whirlwind Upcut Saw
Model 2121, no blade, 5 HP, 3 PH

469
Airlift
4' x 5', with controls, Presto 2000 lbs. capacity, Ax20-4860

470
Pallet Wrapper
4 x 4 platform, 1/2 HP, 1 PH, condition unknown

471
Upcut Saw
6" cutting capacity, 24" blade, 3 PH, works good

472
Hydraulic Tank
36" x 24" x 36" hydraulic tank

472A
10 HP Hydraulic Unit*

473
Rolling Ladder
24" x 88" x 84", as is

474
Bulk Nails
44 box, 1 5/8" x .113 NP, 50 lb. box

475
Bulk Nails
34 box, 2 1/4" x .120, 50 lb. box pallet bulk nails

476
Plastic Wheels Casters
4" x 2 1/2", 4 3/4" high, 40 swivel, 40 rigid, brand new, 2 1/8" x 2 1/4" plate

477
Casters
100 PC used 3" x 1 1/4" x 4" swivel casters, 3" x 4" plate

478
2- Burroughs and 1 Victor Adding Machine
Condition unknown

479
RC Allen Cash Register, Remington Rand Adding Machine, Pay Master Check Writer
Condition unknown

480
Barrett, Sund Strand, Comptometer Manual Adding Machines
Condition unknown

481
S303 Easy Baler
With electric hoist

482
8 Ton Budgit Trolly with Chain Hoist
Good condition

483
Quincy 5120 Air Compressor
Serial # 5033310, was running when taken out of service

484
Meyer's Snow Plow
Model LP8.5, serial # 00191709402, 32" x 8' 6" blade, excellent condition

485
Meyer Blaster 750S Salt Spreader
Excellent condition

486
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

487
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

488
4" Black Tee Hinge
12 boxes of 100 pieces, heavy duty

489
4" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

490
5" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

491
Metal Roofing Screws
# 10 x 1 1/2 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 2000 pieces

492
Metal Roofing Screws
# 10 x 1 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 3000 pieces

493
Wood Screws
# 10 x 2, # 2 sq drive black wood/ hinge screws, 12 boxes of 2500 pieces

494
Wood Screws
# 10 x 2 1/4, #2 sq drive black wood/hinge screws, 12 boxes of 2000 pieces

495
Wood Screws
# 10 x 2, # 2 sq drive zinc wood/hinge screw, 12 boxes of 2500 pieces

496
Wood Screws
12 boxes of 2000 pieces, # 10 x 2 1/2

497
Grinder
1" arbor with 12" grinder on stand and 7" diamond wheel, no drive

498
Powermatic Sander
Model 30B, serial # 7930602, 10" disc, 6" x 22" belt sander, line shaft ready, works, well used condition

499
Metal Platform Scale
16" x 26" on wheels, 500 lb. capacity, and 10" x 13" table top scale collector type, condition unknown

500
Walk Thru Skid Steer Forks
48"

501
Walk Thru Skid Steer Forks
42"

502
Skid Steer Forks
48"

503
Skid Steer Forks
42"

504
Heavy Duty Skid Steer Forks
48"

505
Heavy Duty Skid Steer Forks
42"

506
Heavy Duty High Capacity Skid Steer Bucket
78" with bolt on cutting edge

507
Skid Steer Bucket
84"

508
Skid Steer Bucket
78"

509
Skid Steer Bucket
72"

510
Skid Steer Bucket
66"

511
Skid Steer Bucket
60"

512
Skid Steer Mulch/Snow Bucket
78"

513
Heavy Duty 2 Cylinder Brush Grapple for Skid Steer
72"

514
Heavy Duty Brush Cutter for Skid Steer
72"

515
Brush Cutter for Skid Steer
60"

516
Bale Spear
49" spear with 18" stabilizers, 3000 lb. capacity

517
Auger Head
2" hex output shaft, up to 48" bit capacity, does not include any bits

518
24" Hex Fab Auger Bit

519
18" Hex Fab Auger Bit

520
12" Hex Fab Auger Bit

521
Quick Attach Plate

522
Quick Attach Plate

523
Quick Attach Plate

524
Backhoe For Skid Steer

525
Quick Attach High Flow Trencher
6" x 48", with side auger, bullet teeth approx. 5 years old, only trenched approx. 5000', all in good working condition

526
25' Boom Extensions*
2020 Bobcat Attachment Skid Pro Boom extender for setting post and trusses, only used a couple times, like new

527
8" Montana Post Driver*
Model 1000 E, serial # JH7C025T-04181010, with 3" concrete breaker pin, ONLY 1 YEAR OLD

550
Wells Metal Saw*
14" cutting width x 11" deep adjustable angle, blade size 3/4" x 137 1/2", line shaft ready, works good

551
Saw Blade*
6 piece, St 3/4" x 137 1/2", 10/14 T brand new, fits lot 550

552
Puma Air Compressor*
With 5.5 Honda motor, condition unknown

553
Bolt Bin*
Metal pigeon hole, used, bolt bin is empty

554
Bolt Bin*
5 bolt organizers

555
Concrete Mixer*
#32 mixer with Briggs & Stratton motor, older but works

556
10 Assorted Air Cleaners*

557
3 Used Mufflers*

558
Chainfall Hoist*
1/4 ton cyclone CM chain hoist, 3 ton L-70 chain hoist, No 120 trolly

559
Blower*
4" inlet blower, 18" drum, line shaft ready, good condition

559A
Drum Blower*
Cincinnati fan model 30/TS, 16" drum, 14" fan, 3 HP, 3 phase

560
Orange CM Chain Falls*
Approx. 10' lift, 3 ton hooks

561
Porta Cool*
16'', 3 speed, model PAC2K163SFC

562
Metal Cabinet*
2 doors with shelves

563
Chain Falls*
Yale spur geared, 2 ton with trolley

564
Porta Plot Deer Feeder with Solar Panel*
31"x49"x57''

566
Gas Alternator*
Predator 212 cc gas motor with alternator to charge 12V batteries

1000

567
Heavy duty 5/8" Chain*
9' long with 1 hook

568
Used Goodyear Tires*
11 R 22.5, 5 ply, set of 4 

569
Used Goodyear Tires*
17.5 R 25, 

570
Used Titan Tires*
17.5 R 25, 3 pieces

571
Used Earthmax Tires*
20.5 R 25, 2 pieces

572
Assorted Power Tools*
Bosch sander, Stanley planer

573
Assorted Power Tools*
Black & Decker Sawzall, Milwaukee circular saw

574
Pitchfork and Posthole Digger*

575
Assorted Hand Tools*
Pry bars, chains, hammer, hay hook

576
Sears and Roebuck Table Saw*
Model 113-29920, serial # 1056, 10" blade, 30" x 40" top

577
Pipe Fitters Tools*

578
Delta Table Saw*
Serial # BU5937, 7" blade, 4" joiner
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Lake Erie Equipment Consignment Auction
 Live Auction
 
Sale Date(s)
Friday Mar 25, 2022 Completed
Sale Location

Mesopotamia, OH 44439
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.
 

00
Information Lot
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 ( jc2559@gmail.com) fax 440.693.4316. Consign early for maximum free marketing.

98
Manual Sealless Steel Strapping Tool*
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

99
Heavy Equipment Key Set 24 Keys*
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

100
Miller Bobcat 225 Welder
Serial # La257374, meter shows 1030 hours, runs and welds good, Kohler gas engine

101
48" Log Rite Cant Hook
Brand new, ch 048 cant hook

102
36" Log Rite Cant Hook
Brand new, PV036, peavy cant hook

103
30" Log Rite Cant Hook
Brand new, MS030

104
Handyman Jack
Model HM-485, brand new, 4660 lb. capacity, 48" tall

105
New Husqvarna 372XP
Serial # 2021 0900267, with 20" bar chain

106
New Husqvarna 395XP
Serial # 2019 2130900, no bar and chain

107
Used Husqvarna 395XP
Serial # 2017 2136050, with 24" bar and chain, works good

108
Husqvarna 395XP Chain Saw
Serial # 2017 1333122, with 24" bar chain, works good

109
Used Husqvarna 372XP Chain Saw
Serial # 2016 0200671, with 20" bar chain, works good

110
Thunder Boy Auger
Model Y43208, serial # 2016 03795, with 7" auger, like new

111
Fiskars 5 Piece Ax Set
New 36", 28", 23 1/2", 17", 14", all have lifetime warranty

112
Cyclone Chain Hoist
Chain falls 1 ton aluminum frame, good condition

113
Mousehole Anvil
5 1/4" x 24 1/2" x 11", 196 #

114
Master Mechanic Socket Set
3/4 drive, 21 piece set, like new condition

115
New DJM Pallet Jack
Brand new, 5000 #

116
Barrel of Chain
Approx. 350' 3/8" Gr. 30 chain, brand new

117
Knaack Portable Tool Box
On wheels, loaded with mostly USA quality tools, electric, air, wrenches, socket set, hammers, pipe wrenches, crescent wrench, vise grips, and lots more

118
1000 Gallon Air Tank
Refurbished

119
500 Gallon Air Tank
Refurbished

119A
Big Green Egg On Stand

120
Cooks Edger
2 blade 12 1/2", 3" x 26", 90" infeed, 48" outfeed live belt with 5" extension, 18' 6" overall length x 80" wide, hydraulic drive

121
HMC Vertical Edger
HMC model EV1, serial # EV10-26, 2- 20" blades, 30 HP, 3 PH electric drive, hydraulic adjustable, 230/460 V

121A
Hilltop Equipment Vertical Edger*
40 HP, 3 phase, 2-20" blades, self contained hydraulic pump, very good condition

122
Morgan Edger
22" x 3", 48" in and out power conveyor, 190" overall length, 36" overall width, has 1- 10" blade, could use some TLC

127
Belt Conveyor
24" x 128" conveyor belt, 12"-23" high, no drive

128
Lumberlift
4' x 6' x 4", hydraulic drive

128A
Steel Banding
1 skid of 12 roll, 3/4" x .031 H.T. banding metal

128B
Steel Banding
1 skid of 14 roll, 3/4" x .031 H.T. banding metal

128C
Steel Banding
1 skid of 24 roll 3/4" x .031 H.T. banding metal

128D
Steel Banding*
7 rolls, 1 1/4" banding

128E
Banding Cart*

129
Belt Conveyor
12" x 33', 6" x 42" tall conveyor, has 1- 4" side, 2 HP, 3 PH, electric drive

129A
2 Strand Live Deck*
28" x 30' 6", electric drive

130
Belt Conveyor
20" x 20' x 4" sides, 12"-80" incline conveyor belt, 3 PH, electric drive

131
Lumber Rolls
44" x 3 1/2" x 10' long, 32" high lumber rolls

132
Crossover Conveyor
Brewer Crossover, hydraulic drive, 36" x 96" x 36", 3 strand deck, 10" x 96" conveyor roll, hydraulic drive, 8" x 72" rolls, no drive

133
Belt Conveyor
14" x 10' angle, 6' 6" flat red conveyor, 5" sides, 72" high bottom, 57" high on top, 1/2 HP, 3 PH, electric drive

133A
Belt Conveyor*
8'' wide x 18' 6"

134
Lumber Rolls
56" x 84" x 30"

135
Belt Conveyor
36" x 35" incline conveyor, 23"-34" tall hydraulic drive

136
Roll Case
16", 16' long, 4 1/2" d. rollers, adjustable height 33"-42", no drive

137
Lumber Rolls
12" rolls, 84" x 25" x 64" Pre Feeder shop made, hydraulic drive

138
Belt Conveyor
Brewer 13" x 12' x 32" belt conveyor, no drive

139
Lumber Lift
42" x 87" x 19" electric hydraulic lumber lift, 3 PH electric

145A
Switch Blower Pipe*

139A
Lift Table*
40" x 48", 2500 lb. capacity, electric, condition unknown

139B
Lift Table*
36" x 52", electric, condition unknown

139C
Lift Table*
36" x 60", condition unknown

139D
Atlantic Kelly Hydraulic Lift
3 sections-18"x50", 2000 lb capacity

140
Belt Conveyor
24" x 11' incline conveyor, 12"-57", 8" sides, 1 HP, 3 PH electric drive

140A
Koger Air Lock*
Size 16, 2 HP, 3 phase

141
Kohler Natural Gas Generator
50 KW, 62.5 KVA, 91 original hours, has not run in awhile, condition unknown

141A
Belt Conveyor
20" x 8' incline conveyor, 6"-30" height, 2 HP, 3 PH, electric drive

142
Upcut Saw
PF model 90, electric drive

143
4 Cylinder Perkins Diesel Power Unit
With 5 HP air compressor and hydraulic unit with clutch on frame, meter reads 2132 hours, oil cooler

144
Switch Blower Pipe
2014 Imperial model IDV-10-12, serial # 2716, 10" inlet/outlet

145
Switch Blower Pipe
2014 Imperial model DV-14, serial # 2717, 14" inlet/outlet

146
Baker Stacking Rack
Model BSR-O, serial # 05-187, 84" x 84" x 72"

147
Pallet Chief Pallet Stacker
68" x 78" x 108", air operated, looks like excellent condition

148
Minneapolis 4 Cylinder Gas Engine
Serial # 620782 with clutch, flat pulley, hand or electric start, does not run

149
6 Cylinder John Deere Diesel
With clutch, meter shows 2218 hours, ran when taken out of service, but needs new radiator

149A
John Deere Power Unit*
Model M63HA, serial # 1090200, with hydraulic pump, runs

149B
Cat Power Unit*
Model 4CPXL07.2HSL, 3126 diesel, power unit 210 HP, with radiator and fuel tank, has new clutch with 12" 10c groove pulley, runs good

149C
471 Detroit Power Unit w/ Clutch*
Hours unknown, has all new seals and rings, head redone and ready for work, good clean unit

149D
John Deere Power Unit*
Model 4024TF270, serial # PE4024T011511, came off Maruka, runs good

150
Self Dumping Hopper
6 yard

151
Self Dumping Hopper
5 yard

152
Self Dumping Hopper
4 yard

153
Self Dumping Hopper
3 yard

154
Self Dumping Hopper
2 1/2 yard

155
Self Dumping Hopper
2 yard

156
Self Dumping Hopper
1 1/2 yard

157
Self Dumping Hopper
1 yard

158
Self Dumping Hopper
3/4 yard

1000

159
2- Nylon Binders
Model 2350, serial # 5589, plastic 1/2" banding tightener/sealer

160
Strap Binder
Model 2309, serial # 1018t, air 1/2" plastic tightener/sealer, size 13

161
Strapping Tool
Model 2314, hand tightener/sealer combo, 3/8" thru 3/4" for plastic banding

162
2- Gerald Metal Sealless Strapping Tools
For 5/8" steel banding

163
2- Gerald Banders
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

164
Gerald Bander
Model 2362PN, serial # 5/8 35, 5/8" plastic tightener/sealer, air operated, condition unknown

165
Banding Tools
9 assorted sealers, 3 tighteners, assorted sizes

166
Banding Tighteners
3 Banding tighteners up to 3/4", like new condition

167
Banding Sealers
4- 3/4" sealers, 2- 5/8" sealers, used but like new condition

168
Gerald Sealer
Model 630, 3/4" heavy duty, works good, with pusher seal

169
Banding Sealers
4- 3/8" , like new condition

170
Banding Tools
2- 1/2", 1- 5/8", 1- cutter, fair condition

171
Banding Sealer
1 3/4", double notch, good condition

172
1 1/4" Banding Tools
3- 1 1/4" sealers, 2- mip 1400 tighteners

173
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

174
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 1 battery and 1 charger, works

175
Orgapack Battery Sealless Strapping Tool
ORGA Pack OR-T 83, 1/2" or 5/8" plastic strapping tool with 2 chargers, works

176
Air Banding Tools
Fromm air tightener, Fromm air sealer, Aero-motive Balancer, condition unknown

177
Cornell Conveyor
28' x 13 1/2" live belt conveyor, 1 HP, 3 PH electric motor, controls are 30" tall, 17" wide x 35" tall

178
Log Turner
30", good cylinders, hydraulic drive

178A
Deduster*
8", no drive, 5" x 56" conveyor belt, 8" x 9" brush wheels

179
Unscrambler
No drive

180
Sawdust Bin
73" x 111" x 120" saw dust bin, 5-18" outlet, 10" inlet, 88" tall bottom

180A
Sawdust Bin*
5 x 7 x 9, with hydraulic auger, 36" drum, 15" inlet, 11 x 13 outlet, 8 1/2" wide paddle in good condition, hydraulic blower, mfg. by Yoder Hydraulic

181
Cornell Slab Saw
30" blade, 13 HP drive, 18" x 48" outfeed conveyor, 18" x 12' infeed conveyor, unit works, but will need some help

181A
The Summit Slab Saw*
36" blade with Kohler 27 HP gas motor, 18" x 60" live conveyor, 18" x 102" infeed conveyor, made by Hershberger Mfg.

182
Morbark Chipper
Model 13, 20" roll, Perkins diesel with clutch, 56" wide infeed, 60" long, meter shows 820.7 hours

182A
Beloit Passavant Stationary Chipper*
Model 1048-20-D, serial # 50325-01, 48" wheel, 18" x 21" inlet, 12" x 12" outlet

183
52" F Saw Blade
Works but need attention

184
Phelps Blower
24" drum blower, has good paddles, belt drive, 8" inlet

185
Frick Husk with Mandrel

186
All Old Saw Blades

199A
Steel Lumber Dipping Tank*
6' x 6' x 20' x 1/2" thick

187
Lumber Rolls
11 piece 12" used lumber conveyor drive rollers and 1 new roll morse, C-2060H conveyor chain

187A
Self Dumping Hopper
3/4 yard, used

188
Self Dumping Hopper
3/4 yard, used

189
Self Dumping Hopper
1/2 yard, used

190
Self Dumping Hopper
1/2 yard, used

191
Honeyville Blower
Model HF26, serial # 26987, 26" inlet/outlet, has good paddles, no drive

192
General 10" Blower
Serial # A-8950, 7" inlet, 6" outlet, no drive

193
Dayton Blower
15" air circulation, 16" intake, 12" x 16" outlet, no drive

193A
Bruning & Federle Blower*
Model JJ 26 2186, date 8-6-01, 60" drum, 19" x 45" paddle in good condition, no drive, 14" x 6 groove pulley

193B
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, connector, elbow, 6" to 18"

193C
Blower Pipe*
40" x 48" x 60" box full of assorted blower pipe, wyes, miscellaneous 6" x 24"

193D
Blower Pipe Fittings*
44" x 56" x 42" box full of pipe clamp rings and miscellaneous fittings, elbows, reducer, wyes

216
Yanmar 60 Track Forwarder
24" x 12' tracks are 90%, 8' log deck on back, 101" x 15' x 122" tall overall, with picker, Yanmar diesel model 4T112TL-FW, 130 HP, meter shows 2930 hours

193E
Blower Pipe*
Skid of blower pipe, reducing wye, manifold, reducer, elbow

193F
Line Shaft Coupler*
3 1/2" reduces to 2 1/2"

194
Hytrol Belt Conveyor
32" x 7', 28" tall, adjustable height, 3 PH, electric drive

195
Webster Vibrating Chute
Model FSM, serial # 892-3641-1, 24" x 20' x 7" side, no drive

195A
Expandable Conveyor*
24" x 6" x 30" flexible conveyor, expands to 19' long, 44" high, on casters, good condition

196
Whirlwind Upcut Saw
Model 212R, serial # 1881M52R, 18" blade, 10 HP, 3 PH, with 14" x 10' conveyor with 5 stops

196A
Hydraulic Lift*
Model P-72-040SF, serial # 98526-2, American 4000 lb. capacity lift, air/hydraulic lift, 31" x 64" x 19" plus 3" steel channel on top on 6" swivel caster

197
Steel Banding
3/4 x .029 high test metal banding, 12 rolls over 1200 lbs.

198
Self Dumping Hopper

199
Self Dumping Hopper

247

199A
Mellott Rollcase*
24" x 23', 6 1/2" rolls, hydraulic drive 

199B
Mellott Rollcase*
24" x 24', no drive

199C
3 Strand Transfer Deck*
7' x 10' x 60" high, hydraulic drive

199D
Meadows Log Turner*
Serial # LT-0056-98

199E
Drop Deck*
3' x 20' slant drop

199F
Drop Deck*
67" x 20' slant drop deck 

200
Meadows Portable Mill
56" F style, 2 air dogs, 12' carriage, 40' track, air dogs, receiver, log turner

201
Wood-Mizer LT40 Portable Bandmill
VIN 456A42410RIFE6037, 1994, 18 HP Briggs motor, has new wheels, meter reads 179 original hours, approx. 25' long

202
Wood-Mizer LT25 Portable Bandmill
VIN 456822019VENEC6678, 1998, Kohler 15 HP motor, approx. 22' long, has only cut approx. 10,000 board foot, but was stored outside under tarp, motor just rebuilt

203
1/25 Wood-Mizer LT40 Bandmill
New, fully hydraulic sawmill

204
Band Sharpener
Electric, very little use

205
Single Tooth Setter

206
Corinth Left Hand Portable Saw
3 head block, 52" f pattern with 7" blower, 16' carriage, 34' track, 14" x 9' live belt conveyor, older saw but works good

207
Hand Filer, Saw Wrench, and Swedge

208
New Eagle Claw Teeth
Box of 100

209
Detroit Left Hand GM471 Diesel
Rebuilt clutch, runs good, has minor oil leak, new radiator, alternator model 4045C, serial # 35080, meter reads 2498 hours

368

210
Double Tooth Band Setter*
# 080-214, sets up to 3" bands, like new condition, made by Hershberger Mfg.

369

211
4 Lumber Tiger Carriage Head Blocks

370

212
Setworks for Lumber Tiger Carriage
1 complete set, 1 partial set for parts

214
Hendrick 14" Panel Saw*
2 extension tables, 4' x 12' and 4' x 8' 4", looks good but condition unknown

215
Double End Trim Saw
Speed saw, 3 ph., 240 V, electric drive, 102" wide x 29' long x 40" tall

216A
Steel Dump Bed*
7' x 7' w/ fold down sides and tailgates, good condition, came off Maruka, does not include any contents

216B
Maruka Hydraulic Knuckleboom*
Model 31191020010, serial # 040565, needs kone new seal. otherwise in good condition

217
John Deere 548E Skidder
Serial # DW548E5535469, meter reads 6426 hours, JD 4045 engine, 86" blade, winch with 50' cable, runs good

218
Franklin 170T Cable Skidder
Serial # 16737, 88" x 28" blade winch, meter reads 4522 hours, 23.1-26 tires 90%, Cummins diesel # 60207739

219
Skidder Tires
18-4 34 tires off of 540 , good rims, 10% rubber

220
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220A
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220B
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220C
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220D
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

220E
New Lumber Cart
42" x 72" x 16" with 2 1/2" x 10" casters, new

221
J.D. 455E Crawler Loader
Serial # TO455EX739737, good 15" tracks, 6" x 48" forks, with winch, under carriage 55%

222
2014 Bobcat T650 Skid Steer
Serial # A1JG11189, 18" tracks, 80" heavy duty bucket, all new fuel system 200 hours ago, meter show 4698 hours, tracks 90%, good sprockets, very good machine

222A
2006 JCB Telescopic Loader
Model 52755, around 4000 hours, 6000 lb. capacity, foam filled tires, skid steer quick attach and hydraulic couplers, good working condition

223
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 month ago, comes with 3 phase charger

224
Skid Steer Tracks
Tracks came off case 85XT, but will fit more, 18" wide, 82" log tracks, 90% rubber, frame looks in good condition

224A
Rubber Case Skid Steer Tracks*
18" wide, 80" long, Approximately 50% tread, Off of Case TR320

225
Cat Crawler Loader
955 Cat, 1978, approx. 4000 hours, under carriage about 30%, tracks about 70%, no leaks, runs good, with bucket, hour meter not working

226
Hyster D4 Crawler Winch
Works

226A
Ramsey 208 Winch*
Model J10R, 10,000 lb. capacity, PTO drive, condition unknown

227
Rubber Tracks
Used, off of Bobcat 300, 18" wide, approx. 40% rubber

228
Metavic Log Wagon
Serial # ETI7RF180908125, with 13 HP Honda motor, air tires, 6 wheel, one wheel needs new bearing, good condition

229
916 Cat Loader
Serial # 2XB01323, with 1.75 yard bucket, weights 24,200 lbs., 17.5-25 tires 40%, meter reads 2327 hours, runs very good, has weak transmission

229A
1994 Komatsu WA180-1 Wheel Loader*
Serial # A75547, meter reads 21975 hours, good working condition 

229AA
Clark Loader*
45C-PK loader, serial # 439B121CB, meter shows 4635 hours, runs good

229B
Bucket For Komatsu*
2.25 yd. 96" wide

229C
Forks For Komatsu*
46"

229D
Set of Four Used Tires*
17.5-25, very good condition

230
2007 Elgin Pelican Street Sweeper
John Deere 4045T Power Tech diesel, meter reads 7245 engine hours and 24,050 miles

231
JLG 8042 Sky Trak
Serial # 0160051832, 2013, 8000 lb. capacity, 42' reach, 4" x 48" forks, foam filled tires 60%, Cummins diesel engine model QSB3.3, 100 HP, meter reads 2978 hours, very good condition

232
Toyota LP Forklift
Model 7FGU32, serial # 70343, 6000 lb. capacity, solid pneumatic tire 80%, side shift 88" lowered mast, has cab with 2 door, heat, fan, lights, 500 hour on new motor but has broken timing cover. ENGINE DOES NOT START ANYMORE. WE DON'T KNOW WHAT THE ISSUE IS.

233
Linde H25D Forklift
Serial # H2X393U02651, 4655 lb. capacity, bald tires, 88" lowered mast, meter reads 12,000 hours, rebuilt head gasket, new timing belt

234
Cat 267B Skid Steer
Serial # Cat0267BHCYC01032, with hitch and 7' bucket, meter reads 3552 hours, tracks 80%, no oil leaks, very good machine

235
John Deere 455E Crawler Loader
With carco 28 winch, meter reads 13534 hours, 6' x 44" forks, has oil leak between winch and transmission, good machine, like new under carriage

235A
Used 450 Case Crawler/Dozer Parts

236
Riding Floor Sweeper

237
Stanley 350 Jackhammer
All new seals

237A
Jack Hammer*
large, works, will fit 125-200 excavator

238
Case 1816 Skid Steer*
60% rubber, 27 x 8.50-15, 42" bucket, Tecumseh gas motor, meter reads 495 hours, runs good but need clutch rebuilt

239
Bobcat Steel Skid Steer Tracks*

240
Walk Behind Burro Donkey Truck Carried Forklift*
Model B13-3K, serial # EU, code # 2HanXXDDBHHAUXXXEA5, electric start, 13 HP, Honda hydraulic drive, 3000 lb. capacity, weighs 1963 lbs., runs good, forward/reverse handle needs work

241
1998 New Holland LX665 Skid Steer*
Hand controls, SN-852052, Hours unknown, 64" quick attach bucket

242
Forks*
6" x 44", quick attach, 70" overall, fits Komatsu 200 wheel loader, has crack in frame

243
Forks*
6" x 48", will be repainted

243A
Extension Forks*
6" x 6'

244
1985 Case 580E Tractor with Backhoe*
80" bucket, 36" backhoe bucket, Includes extra 16" bucket for backhoe, PIN-17026296, Meter reads 2555 hours

245
2007 John Deere 320 Skid Steer*
PIN T00320A150478, includes 70" bucket, quick attach, hand and foot controls, 52 HP engine, meter reads 2639 hours, 32" solid rubber tires, good working condition

246
Skid Steer Wheels*
12-16.5, air tires, 8 lug, came off lot 245

250
International 340 Utility Tractor
Model 340 utility, serial # 7121P-X-Y, 3 point does not work, runs rough

251
Farmall Super M Tractor
Model A, serial # FAA53637, original paint, runs good, 70% thread, a little dry rot

252
Farmall A Tractor
Runs good

253
Farmall H Tractor
Model H, serial # FBH 377207X1, tires 12.4-38, 50%, a little dry rot, no pulley, has draw bar and PTO, should be running by sale day

254
Farmall Cub
Model F-Cub, serial # 159269, new rear rubber, 1 new front rubber, 6 V, 8.3-24/8-24 tire with 54" snow blade, mostly rebuilt and restored, lights work

255
John Deere 430
Model 430-W, serial # 142788, has PTO, 3 point hitch, 2 cylinder gas, 13.6-28 tire on 12" rim, 70% tires

256
John Deere 40 Tractor
Model 40-S, serial # 64346, 2 cylinder, gas, 6 V, 11.2-24 tires 95%, 3 point works PTO, is scheduled to be repainted before auction

257
John Deere 1950 D
Model D, serial # 188725, repainted, runs good, has 1 hole in right fender, came from Georgia, tires 60% tread, a little dry rot, steering column has oil leak

258
1/16 Scale John Deere D
Model D, new in box

259
1/8 Scale John Deere D
1939, Model D, new in box, 75th anniversary signed by Joseph Ertle, manufactured in USA

260
John Deere A
Model A, serial # 596504, runs OK, original paint came out of Georgia, 13.6-28 tire thread are 50% but dry rot holds air

261
New Holland TC35 Tractor
Serial # G609922, with loader and quick attach bucket, 4WD industrial tire, meter reads 980 hours

262
2017 Kubota MX5800HST Tractor w/ Front End Loader*
Model MX5800 with loader and bucket, 2017, meter shows 190 hours, as close to new as you'll find them, excellent condition

263
Ford Tractor*
8N tractor, not running

263A
3 Point Danuser PTO Auger*
4"-8" auger, 6" is bent

264
Plow*
5 bottom plow

265
Disc*
10' disc

266
Disc*
12' disc

265A
Allow Chalmers Cultivator*
19' 6"

266A
Hay Wagon*

267
Allis Chalmers Tractor*
WD 45 gas tractor, 6 cylinder, PTO, belt pulley, snap coupler 90% rubber, engine model #G-230, serial # 397291, approx. 70 HP, good solid running tractor, no oil leaks

268
1972 Ford 5000 Tractor*
5' side attach bush hog, Hydraulic tank, 3 point hitch, 8 speed transmission, Meter reads 456 hours

278
2000 GMC C7500 Truck, VIN # 1GDJ7H1B7YJ522494*
Year: 2000
Make: GMC
Model: C7500
Vehicle Type: Truck
Mileage: meter reads 138,992
Body Type: Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 7.4L; MFI; High Performance
Fuel Type: Propane
VIN #: 1GDJ7H1B7YJ522494

Features and Notes: RUNS ON PROPANE, has flatbed w/ gooseneck hitch, 87" x 9' bed, 7 leaf spring, good running truck

279
2000 GMC Dually Bed*
Fits Lot 278

280
GMC Service Truck*
1990, 10 speed with 1995 aluminum service body bed with generator, 143,500 miles, Cat 3116 Diesel engine, runs good, under CDL, very good rubber, with title

281
Flat Bed Truck*
1974 Ford 900 cab over 5 speed manual transmission, 46,341 original miles (model C904K), this truck was bought new by the city and was only used as a paint truck, has title, runs good but has damaged radiator

281A
1981 Chevrolet C60 Dump Truck, VIN # 1GBJ6D1A4BV120864
Year: 1981
Make: Chevrolet
Model: C60
Vehicle Type: Truck
Mileage: meter reads 45,017
Body Type: Medium Conventional Cab & Chassis
Drive Line: 4x2
Engine Type: V8, 5.7L
Fuel Type: Gasoline
Transmission: 5 speed manual
VIN #: 1GBJ6D1A4BV120864

Features and Notes: GVWR 24,000 lb. 

281B
Valley Ford Dump Bed*
8' x 10' x 40"

282
36 Volt Taylor-Dunn Electric Go Cart*
42" x 76" flatbed with hitch, new lights and wiring, 124" overall length, 5.70-8 wheels

282A
Cushman Motorized Cart
Model 898530-8310, has dump bed, new carb in 2020, needs batteries, not in working condition

284
*Job Site Trailer
8' x 30' office trailer with heater, A/C, power box, 2 doors, looks to be in good condition

285
Pup Trailer
15" x 8' tandem axle, all new brakes, Busking and walking beams, has title

286
Tree Shear with Accumulator
20", 88" wide, 57" deep, 74" tall, came off 549 JD, can be adapted to almost any machine

287
Equipment Trailer
78" x 16' long x 18", black trailer, 54" tongue with pintle hitch, double axle, 2- 15" x 55" ramps, could use some repairs

288
Equipment Tilt Trailer
72" x 17' 6" x 18", 5' long tongue with pintle hitch, 94" over fenders, rear axle broke in half, may need other repairs, double axle trailer

289
Homemade Trailer
76" x 16', double axle, 3' tongue, 12" sides, 2 5/16" ball, no ramps

290
2- Trailer Ramps
16 3/4" x 10' long, 5 1/2" high

291
Trailer
6' 4" wide x 16" double axle shop built trailer, 3" steel side 10" wood side, new jack, tires 85%, trailer in good condition

292
Dump Trailer
2013 Low Pro 24" deck height, 14,000 lb. GVW, 7 x 12 double axle, 2 ramps, 80% tires, has title, has tail gate option, new battery, good condition

293
2007 Universal 2 Horse Trailer
Model ML7X11WTZ, VIN 16HPB11227K014227, with tack room interior, LED lights, 80% tires, steel frame, aluminum body, good condition

294
Equipment Trailer*
97" x 20' flat, 6' dovetail, 2 ramps, dual tandem axle, 80% tires, 20,000 GVW, frame looks in good condition, no contents

295
Enclosed Trailer*
Serial # WC-7235000 with aluminum ladder racks, tandem axle, 69" x 144" inside dimensions, 70" tall side door, 64" x 63" double doors, very good condition, like new wheels, road ready

296
Enclosed United Trailer*
68" x 123" x 70" inside dimensions, with new spare tire, 50 % tires, aluminum ladder racks, 64" x 66" double door opening, nice condition, road ready, single axle

296A
Flat Bed Trailer*
78" x 166" tandem axle, has dry rot wheels, no ramps, nice shop built trailer

296B
Speed Lift Portable Loading Dock*
Model SL6000-B EWP68 RFS, 6000 lb. capacity, 230 volt, 3 phase, 68 1/2" x 96", with 41" and 48" end plate

297
Yellow Pine Steps
Notched stringers and threads, 40" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

298
Yellow Pine Steps
Notched stringers and threads, 40 1/2" wide, 14 rise, 13 step, 10" run, 107 3/4" high floor to floor

299
Storage Barn
Rustic 8' x 10' x 92", peak height 114", 56" x 72" double door, with clear coat sealer, shingle roof, yellow pine floor, brand new

299A
Rustic Playhouse*
6' x 10' rustic playhouse with 6' x 42" porch, 3 window, shingle roof, 2 x 8 yellow pine flooring, 22" x 54" door, has clear sealer

300
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

301
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

302
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

303
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

304
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

305
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

306
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

307
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

308
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

309
Metal Bins
40 pieces per pallet, 11 1/2" wide, 18" deep, 12" high

310
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

311
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 6" high

312
Metal Bins
48 pieces per pallet, 17 1/2" wide, 18" deep, 12" high

313
New Servo Motor
2 Kinetex servo motor, 1850 RPM, 480 V, 3 PH

314
Used Servo Motor
3 PH, 480 V, 3200 RPM

315
Hydraulic Cylinder
3 new Parker, model PX115-030-52, electric hydraulic, cylinder

316
Baldor 3 PH Motor
New, 20 HP, 230/460, 3 PH, 1170 RPM, 286T frame, 1 7/8 shaft

317
Air Cylinder
New

318
Air Cylinder
New, 10" bore x 1.00 air cylinder

319
Schmidt Air Press
New, 2" stroke, 9460 lb. capacity

320
Die Lift Cart
Dayton 880, manual hydraulic lift, like new

321
Weld Rabit Gas Welder
With 13 HP Honda motor, with 25" cables, works good, 1- 30 Amp outlet, 2- 115 V outlet

321A
Welder*
Electric Lincoln, 250/250

321B
Lincoln Welder*
Ideal Arc R35-325, serial # AC431961, code 7841-AR, no leads

322
Enco 8" Machinist Vise
Enco model 425-7281, 8" swivel vise

323
Bolt Bins
12 bolt bin organizers with hardware

324
Niagara Circle Cutter
1952 Niagara circle shear and punch, 1 1/2 HP, 3 PH

325
Excalibur Sliding Extension Table
Excalibur left hand, off of saw stop, 26 1/2" wide, 80" deep, 34" tall

325A
Metal Table
30" x 96" x 36", metal work bench

326
Clutch
Off of a 4 cylinder Ford motor, 2 1/4" shaft

326A
Prentice Bro's #2 Drill Press
Variable speed, 110/220 volt, 1 ph., 1/2 HP

327
Newman 8-B Moulder/Planer
24" wide, 14" planer, 4 head moulder, log cabin siding, all in 1 unit, 5' wide, 10' long, line shaft ready, with approx. 300 extra cutters and heads

327A
Party Tent
Model TMG-PT2020F, 20' x 20', fully enclosed, 18Ga 1 1/2" tube frame

328
General 10" Table Saw
Model 650, with 53" fence, no drive

328A
Propane Storage Rack
44" x 29" x 70", 3 shelves

329
6" Cornell Blower
Line shaft ready

329A
2006 Genie Superlift
Model SLC-15, serial # SLC07-37841

330
2002 Reliant Shaper
Model DD34, 1/2" and 3/4" spindle, air motor hookup

330A
Metal Job Site Box
24" x 72" x 26" metal job box

331
Grizzly Sander
9" disc, 6" x 24" belt sander, line shaft ready

331A
Gardner Denver Air Compressor
Model Bra-3G, serial # R7016797, 30 HP, 3 PH, 230/460 V, works

332
Generac LP Generator
Model 0043902, serial # 3844729, 120/240 AC, 15,000 watts, 125/62.5 Amps, 1 PH

332A
2018 Husqvarna 390XP Chainsaw*
Works good but needs new trigger cable

333
Husqvarna 576XP
Serial # 2009 4600001, with 20" bar, heated handle, works good

334
Wilton Drill Press
Model 5810, serial # 24121, variable speed, 1 HP, 1 PH, 120 V, works good

335
Kohler Generator
Generator model 100RZ282, serial # 355752, natural gas, meter shows 1574 hours, was working when taken out of service Nov. 2021, 100 KW, 125 KVA, motor model LSG-8751-6005-A, serial # 04789 A-05-RA,

336
New Clifford Anvil
125 #

337
New Clifford Carroll Wide Face Anvil
70 #

338
New Clifford Carroll Anvil
70#

339
New Clifford Carroll Anvil
30#

340
Miller Welder
Serial # KK001873, BIG40G propane welder, 120/240 V, 1 PH, original 647.4 hours, continental 3 cyl tm 20, works and welds good

341
Miller Welder
Serial # KC320338, BIG20G welder, meter shows 3441.4 hours, 4 cy Continental gas motor model Y112, runs good with leads

341A
Portable Exhaust*
Model 7E10DD41, serial # 1002054, E-Z ARM Air flow system, meter reads 3570 hours, year 2001, for welding

342
Pallet Jack
EP55, 20 1/2" x 48", 5500 lb. capacity, works good

343
Pallet Jack
Crown, 27" x 48", 5000 lb. capacity, very good condition

344
Banding Cart
Almost full roll of 3/4" steel banding and tools

345
Kreg Jig
K3 pocket hole system with 3 drill bits

346
Rigid Pipe Threader
Model 300, serial # 7615559, on tripod stand, 1 PH, 115 Volts, works good

347
Rigid Pipe Threader
Dies from 3/8"-2", all in good working condition

348
Pipe Fitters Box
Loaded, all in good working condition, tubing benders, cutlers pipe wrenches, soldering

349
Socket Set
3/4" drive, Tekton 8 piece impact socket set, 2 1/16"- 2 1/2", like new

350
Belt Lacer
Model 9, serial # 027369, 6"

351
Stihl 038 Chain Saw
Model 038, 24" bar, works good

352
Box Stapler
2 cc carton/box stapler with staples

353
2-Hillman Machinery Moving Skates
With handle

354
Milwaukee Jack Hammer
Model 5332, electric jack hammer, with 1 bit, works

355
Bucket of Chain
1/4" x 100' Gr. 30 Proof coil zinc coated chain, new in bucket

356
CM Chain Hoist
Model 5, serial # 384BS, 2 ton aluminum, works good

357
Polyester Rope
New, 1/2" x 600' spool blue/white rope

358
Bearings
16 pieces 1" flange bearing, 20 piece 1" pillow block bearings, all new

359
Flange Bearing
37 piece, new 1" flange bearings

360
Pillow Block Bearings
30 piece, new 1" pillow block bearings

361
Baker's Choice Wood Stove
Serial # 128935, takes 6" stove pipe, 12" x 12" oven door, 7 3/4" x 10" fire door, 5 1/4" x 10" ash door

362
New Line shaft Welder
Cheetah 250-5.5, serial # 31028, generator welder with 30' welding cable, 25' ground cable, 1 box 1/8" welding rod and used helmet

363
30 LB. Assorted Welding Rods
7018-6010-6018

364
Moak Shaper
Serial # 8465, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

365
Moak Shaper
Serial # 6938, 1" spindle with Vickers hydraulic motor, MFB10 UY 31

366
Air Tank
Approx. 2000 gallon, approx. 80" tall x 76" wide x 170" long, good condition

367
Gravity Box
120" x 87" x 60", was used for coal storage, in good condition

368
Thompson PW-500 Sewing Machine
Walking foot for industrial materials, canvas, buggy oil cloth, in good working condition

369
Tool Cart
26" x 20" x 52", with 4 shelves loaded with paint, oil, and miscellaneous

370
2- Parts Cabinet
Nice clean cabinet, includes blades, screws, miscellaneous

371
Lincoln Electric Motor
25 HP, 230/460 V, 3 phase, 3485 RPM, 256T frame, 1 5/8" shaft with control box, was working when taken off 2 years ago

372
300 Gallon Red Fuel Tank
Mounted on steel sled frame

373
Set of Forks

374
Honey Locust Live Edge Slabs
10 pieces, 1 3/4" x 9' long up to 48" long, kiln dried, planed

375
18' Windmill
Assembled

376
28' Windmill
Brand new in crate

377
Toy Windmill
Miniature, works, 17" tall, toy only

378
New Bolt Bin
Gr. 5 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

379
New Bolt Bin
Gr. 8 Hex head bolts, all new, assortment from 1/4"- 3/4" approx. 200 lbs., lock nuts, washers, regular nuts, washers

380
Pallet Jack
Model PE3520-60, serial # 6A143709, 9" x 11' forks, 14' 4" overall length, 35" wide, 24 V, meter shows 6113.6 hours, 4500 lb. capacity

381
Pallet Jack
Model PW3520-80, serial # 6A231514, 9" x 72" forks, 9' overall length, 34" wide, 3 1/4" lowered, raises to 9 1/4", 3630 lb. capacity, battery looks good, meter show 405.4 hours, 24 V

382
Battery Lift
Model 15B-S, serial # IA101048, 12 V crown lift, 1500 lb. capacity, new battery, 75" lifting height, 4 1/2" x 26" forks, needs new front wheels

383
Exide Gold Battery Charger
Model WG1-12-550, serial # OH126791, 24 V charger, 208/480 V, 3 PH, works with lot 380 and 381

384
Fuel Tank
48" x 70" x 80" tall, good condition, on stand with hose and nozzle

385
Fuel Tank
30"x 60", good condition, with hand pump, meter, and filter

386
Fuel Tank
30" x 60", good condition, was used for gas

387
Oil Tank
48" x 70", good condition, was used for new motor oil, is empty

388
Oil Tank
38" x 61", good condition, was used for new motor oil, is empty

388A
Fuel Tank*
250 gallon

388B
Fuel Tank*
250 gallon

389
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

390
Antifatigue Rubber Mats
3' x 5' x 1/2", used, but in good condition, 20 pieces

391
Air Compressor
1993 Leroi 175 CFM screw compressor with John Deere 3179 motor, meter shows 2462 hours, new battery, 33" x 82" x 52" frame

392
2- Scotts Lawn Mowers
16", old but in good condition

393
Silent Reel Push Lawn Mowers
18" and 21", good condition

394
2- 18" Fiskars Push Lawn Mowers
Good condition

395
Harris 2101 Torch Set
With 2 tanks and cart, condition unknown

396
Welding Table
35 1/2" x 86 1/2" x 32", with 1 1/8" top, on heavy casters

397
Metal Work Bench
36" x 114" x 34", with 3/16" thick metal top

398
Anvil
3 3/4" x 28 1/4" x 9 1/2", very good condition

399
Blacksmith Forge
32" x 41"x 7", with Royal Western Chief Blower, blower works, frame may need some sheet metal work

400
Anvil
5" x 29 1/2" x 13", good condition

401
Blacksmith Tongs
4 assorted, 40"

402
Blacksmith Tongs
6 assorted, 20"

403
Blacksmithing Sheet Metal Shear
36"

404
Vise and Drill Press
5" Post Vise Complete Columbian Cannedy-OHO MFG post drill #10 1/2

405
Compound Miter Saw
Serial # 18892043012695, Milwaukee fuel, 12" sliding compound miter saw, 2021, like new condition, tool only

406
Milwaukee Battery
12 Amp, brand new

407
Milwaukee Battery
5 Amp, 2 pack, brand new

408
Stihl 041 Farmboss Chain Saw
Serial # 8440591, 20" bar, works good, collector style

409
Stihl 041 Collector Saw
Serial # 2689207, 20" bar, chain runs, nice

410
Stihl 050 Collector Saw
Serial # 2822424, 20" bar, handle bar is cracked, but works good

411
Cordless Makita Skill Saw
Model XSR01, serial # 0284717, 7 1/4", brand new, with charger and bag, 36 V, no batteries

412
Staples
15 case, 20 box per case, 3/8" contractor staples

413
Finish Nails
41 case, 12 combo pack per case, 23 ga combo pack, 5/8", 3/4", 1 1/4", 1 3/8",

414
Flange Bearing
130 F35212ECS, 3/4", brand new

415
Maytag Winger Washer
Rebuilt with electric motor

416
Wells Metal Cutting Bandsaw
3 PH, 3/4" blade, 7" cutting width, 5" depth, good condition

417
Heat Exchanger
34" x 32" x 10", oil cooler, hydraulic drive, works good

418
3- Laminated Work Bench Tops
30" x 72", like new condition

419
Butcher Blocks
2- 42" x 84" x 2 1/4" pine, 2- 42" x 62" x 2 1/4" maple, all came from bowling alley

420
New Assorted Truck Lights and Miscellaneous
Whole crate full

421
5- Angle Gear Boxes
New 2012, 2 3/4" shaft- 1 3/4" shaft

422
3 Used Hydraulic Motors
1- Char Lynn 101-1016-009, 1- Char Lynn 101-1008-009, 1- red, good condition

423
Gas Air Compressor
15 HP gas engine, has new battery, electric start, runs good

424
Stihl Blowers
Backpack BR600 blower, handheld BG85C blower, both work good

425
Honda 3" Trash Pump
Works good

426
Speedi Cut Concrete Saw
Model SC7314, serial # 07031010878, 12"

427
23 Spools Electrical Wire on Rack
6, 8, 14 Ga and more

428
Kennedy Tool Chest
44" x 22" x 39", on wheels, good condition, 10 drawers total, empty

429
Socket Set
3/4" drive, mostly snap on, Proto

430
Hub City Right Angle Gearbox
Model 800, 1 1/2" shaft, 1-1 ratio

431
Siemens SQD Electric Boxes and Miscellaneous Electric Switches

432
1 Fostoria and 1 Stainless Steel Breaker Box
Fostoria model FPC46348A, 200 amp, 480 V

433
Crate Full of Used Electrical Boxes and Miscellaneous

434
6- SQD 100 Amp Breaker Boxes

435
Air Champ Air Clutches, Miscellaneous Air Regulator/Switches

436
Air Motor
60-1 gear box with air motor, 1- AM432 air motor and miscellaneous air regulator

437
5 Miscellaneous Electric Drive Gear Boxes, Speed Reducer, Reliable 56/150-10 , Flexiline 50-1, Boston 40-1

438
Ge 100 Breaker Box and Big Electrical Box

439
10" Metal Cutting Chop Saw
With blade, 1.5 HP, 1 PH

440
Reznor Natural Gas Heaters

441
Reznor Natural Gas Heaters

442
Reznor Natural Gas Heaters

443
22" Centrifugal Ventilator
2 HP, 1 PH, belt drive

444
Oliver Cutoff Saw
Model 94-DH, serial # 97756, 3 PH, 7.5 HP, 240 V

445
Smithway 1" Spindle Shaper/Router
Model # CO1F, serial # 205, 5 HP, 3 PH, 230/460 V

446
Toritz 6" Cyclone Bin
With 37" x 37" x 90" sawdust bin

446A
Torit Dust Collector
Model-VS-1200, SN-1G073652-5, 208/460, 3 phase, 3 hp

447
Carolina Metal Cutting Bandsaw
12" wheels, no blade, 1 PH, electric drive

448
New Oldstock Harnischfeger Electric Hoist
Model 12BD11A, serial # T66070, 4000 lb. capacity, 3 HP, 3 PH, 230/460 V, 19' 5" lift, 20 F.P.M., still on original pallet

449
Twin Disc Clutch
Model SP3145B1, serial # 2111006, 2 15/16" shaft

450
Pulleys
13 assorted V pulleys

451
Pulleys
12 assorted V pulleys

452
Pulleys
4 assorted V pulleys and bushings

453
Caster Wheels
4- 12" x 3 1/2" x 1" shaft, steel wheel with rubber, used

454
Bander
Orga Pack 3/4 banding tightener sealer combo with clips

455
Cooks Cat Claw Band Roller

456
Clutches
SP214P101, serial # 2103488, 4- 11060, serial # 891231, pallet of 2, possibly make 1 good one, 3 1/2" shaft

457
NACD Clutch
#434845AM, serial # 13654070, 2 3/4" shaft

458
NACD Clutch
#437455AM, serial # 08C29093, 3 7/8" shaft

459
Clutch
WPT # 211,serial # W05016207, rebuilt, 2 1/2" shaft

460
2 New Hydraulic Motors
Model BM 5-125

461
Like New 2 Hydraulic Motors

462
2 Used Sheffer Air Cylinders
6" x 16"

463
Rubber Coated Shafts
4- 3 1/2" x 44" x 1 1/2"

464
Ryobi Upright Bandsaw
Model BS-360NR  serial # 04108, 14" bandwheel

465
275 Gallon Oil Tank
With hose reel and pump, used for new motor oil

466
Oliver #450 Tablesaw
Serial # 60673, 10 HP, 3 PH, 24" blade

467
Hazeldene Single Head Notcher
Missing head, electric drive, as is

468
Whirlwind Upcut Saw
Model 2121, no blade, 5 HP, 3 PH

469
Airlift
4' x 5', with controls, Presto 2000 lbs. capacity, Ax20-4860

470
Pallet Wrapper
4 x 4 platform, 1/2 HP, 1 PH, condition unknown

471
Upcut Saw
6" cutting capacity, 24" blade, 3 PH, works good

472
Hydraulic Tank
36" x 24" x 36" hydraulic tank

472A
10 HP Hydraulic Unit*

473
Rolling Ladder
24" x 88" x 84", as is

474
Bulk Nails
44 box, 1 5/8" x .113 NP, 50 lb. box

475
Bulk Nails
34 box, 2 1/4" x .120, 50 lb. box pallet bulk nails

476
Plastic Wheels Casters
4" x 2 1/2", 4 3/4" high, 40 swivel, 40 rigid, brand new, 2 1/8" x 2 1/4" plate

477
Casters
100 PC used 3" x 1 1/4" x 4" swivel casters, 3" x 4" plate

478
2- Burroughs and 1 Victor Adding Machine
Condition unknown

479
RC Allen Cash Register, Remington Rand Adding Machine, Pay Master Check Writer
Condition unknown

480
Barrett, Sund Strand, Comptometer Manual Adding Machines
Condition unknown

481
S303 Easy Baler
With electric hoist

482
8 Ton Budgit Trolly with Chain Hoist
Good condition

483
Quincy 5120 Air Compressor
Serial # 5033310, was running when taken out of service

484
Meyer's Snow Plow
Model LP8.5, serial # 00191709402, 32" x 8' 6" blade, excellent condition

485
Meyer Blaster 750S Salt Spreader
Excellent condition

486
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

487
30 Bales Bridon Baler Twine
9600 x 170, assorted colors

488
4" Black Tee Hinge
12 boxes of 100 pieces, heavy duty

489
4" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

490
5" Zinc Tee Hinge
12 boxes of 100 pieces, with nylon bushing

491
Metal Roofing Screws
# 10 x 1 1/2 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 2000 pieces

492
Metal Roofing Screws
# 10 x 1 galv. Hex washer screw with EPDM washer for metal roofing/siding, 12 boxes of 3000 pieces

493
Wood Screws
# 10 x 2, # 2 sq drive black wood/ hinge screws, 12 boxes of 2500 pieces

494
Wood Screws
# 10 x 2 1/4, #2 sq drive black wood/hinge screws, 12 boxes of 2000 pieces

495
Wood Screws
# 10 x 2, # 2 sq drive zinc wood/hinge screw, 12 boxes of 2500 pieces

496
Wood Screws
12 boxes of 2000 pieces, # 10 x 2 1/2

497
Grinder
1" arbor with 12" grinder on stand and 7" diamond wheel, no drive

498
Powermatic Sander
Model 30B, serial # 7930602, 10" disc, 6" x 22" belt sander, line shaft ready, works, well used condition

499
Metal Platform Scale
16" x 26" on wheels, 500 lb. capacity, and 10" x 13" table top scale collector type, condition unknown

500
Walk Thru Skid Steer Forks
48"

501
Walk Thru Skid Steer Forks
42"

502
Skid Steer Forks
48"

503
Skid Steer Forks
42"

504
Heavy Duty Skid Steer Forks
48"

505
Heavy Duty Skid Steer Forks
42"

506
Heavy Duty High Capacity Skid Steer Bucket
78" with bolt on cutting edge

507
Skid Steer Bucket
84"

508
Skid Steer Bucket
78"

509
Skid Steer Bucket
72"

510
Skid Steer Bucket
66"

511
Skid Steer Bucket
60"

512
Skid Steer Mulch/Snow Bucket
78"

513
Heavy Duty 2 Cylinder Brush Grapple for Skid Steer
72"

514
Heavy Duty Brush Cutter for Skid Steer
72"

515
Brush Cutter for Skid Steer
60"

516
Bale Spear
49" spear with 18" stabilizers, 3000 lb. capacity

517
Auger Head
2" hex output shaft, up to 48" bit capacity, does not include any bits

518
24" Hex Fab Auger Bit

519
18" Hex Fab Auger Bit

520
12" Hex Fab Auger Bit

521
Quick Attach Plate

522
Quick Attach Plate

523
Quick Attach Plate

524
Backhoe For Skid Steer

525
Quick Attach High Flow Trencher
6" x 48", with side auger, bullet teeth approx. 5 years old, only trenched approx. 5000', all in good working condition

526
25' Boom Extensions*
2020 Bobcat Attachment Skid Pro Boom extender for setting post and trusses, only used a couple times, like new

527
8" Montana Post Driver*
Model 1000 E, serial # JH7C025T-04181010, with 3" concrete breaker pin, ONLY 1 YEAR OLD

550
Wells Metal Saw*
14" cutting width x 11" deep adjustable angle, blade size 3/4" x 137 1/2", line shaft ready, works good

551
Saw Blade*
6 piece, St 3/4" x 137 1/2", 10/14 T brand new, fits lot 550

552
Puma Air Compressor*
With 5.5 Honda motor, condition unknown

553
Bolt Bin*
Metal pigeon hole, used, bolt bin is empty

554
Bolt Bin*
5 bolt organizers

555
Concrete Mixer*
#32 mixer with Briggs & Stratton motor, older but works

556
10 Assorted Air Cleaners*

557
3 Used Mufflers*

558
Chainfall Hoist*
1/4 ton cyclone CM chain hoist, 3 ton L-70 chain hoist, No 120 trolly

559
Blower*
4" inlet blower, 18" drum, line shaft ready, good condition

559A
Drum Blower*
Cincinnati fan model 30/TS, 16" drum, 14" fan, 3 HP, 3 phase

560
Orange CM Chain Falls*
Approx. 10' lift, 3 ton hooks

561
Porta Cool*
16'', 3 speed, model PAC2K163SFC

562
Metal Cabinet*
2 doors with shelves

563
Chain Falls*
Yale spur geared, 2 ton with trolley

564
Porta Plot Deer Feeder with Solar Panel*
31"x49"x57''

566
Gas Alternator*
Predator 212 cc gas motor with alternator to charge 12V batteries

1000

567
Heavy duty 5/8" Chain*
9' long with 1 hook

568
Used Goodyear Tires*
11 R 22.5, 5 ply, set of 4 

569
Used Goodyear Tires*
17.5 R 25, 

570
Used Titan Tires*
17.5 R 25, 3 pieces

571
Used Earthmax Tires*
20.5 R 25, 2 pieces

572
Assorted Power Tools*
Bosch sander, Stanley planer

573
Assorted Power Tools*
Black & Decker Sawzall, Milwaukee circular saw

574
Pitchfork and Posthole Digger*

575
Assorted Hand Tools*
Pry bars, chains, hammer, hay hook

576
Sears and Roebuck Table Saw*
Model 113-29920, serial # 1056, 10" blade, 30" x 40" top

577
Pipe Fitters Tools*

578
Delta Table Saw*
Serial # BU5937, 7" blade, 4" joiner