Brightstar Equipment Consignment Auction
Listing ID#: 466732

Sale Location

Middlebury, IN 46540
Sale Dates and TimesSALE IS COMPLETED
Friday Apr 1, 2022 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). Shipping is available. Smalls must be removed within 2 days. All items must be removed within 30 days. Loadout available day of auction, and following week M-F 8-4. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Brightstar Equipment Auction *  All items sell absolute*  No Minimums * No Reserves * Consign now for free advertising * Items wanted include but not limited to Skid Loaders - Excavating Equipment - Contractors Equipment  - Rolling Stock - Semi Trucks - Dump Trucks - Trailers - Attachments  Much Much More. Call Bronson at 574.210.3721 to consign early for maximum free advertising.

00
Information Lot
Brightstar Equipment Auction *  All items sell absolute*  No Minimums * No Reserves * Consign now for free advertising * Items wanted include but not limited to Skid Loaders - Excavating Equipment - Contractors Equipment  - Rolling Stock - Semi Trucks - Dump Trucks - Trailers - Attachments  Much Much More. 

98
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

99
* Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

100
1987 Suzuki LS650 Motorcycle, VIN # JS1NP41A3H2104492
Model: LS650
Mileage: 9'825
Drive Line: Chain
Engine Type: 1cyl, 652 cc; SOHC; A/C; 4-Stroke
Fuel Type: Gasoline
Transmission: Manual 
VIN #: JS1NP41A3H2104492

Features and Notes:  1987 Suzuki Savage, single cylinder 650cc engine, manual transmission, with backrest, luggage rack, windshield, runs and rides. Sells with title. Call Bronson with questions 574-210-3721

101
300 Gallon Fuel Tank
Comes with stand and fuel nozzle, does have dent on top.  Call Bronson with questions 574-210-3721

102
Custom Car Wash Unit
Portable car wash unit can be hooked up to automatic car wash or attached to hoses and nozzles, unknown working condition, does have 3-phase 230/460 volt electric motors.   Call Bronson with questions 574-210-3721

103
Diesel Fuel Tank
It measures 47''wide  X 57'' long and is 45" high.  It has an approximate capacity of 520 gallons and is half full of diesel. 

104
Grizzly - 6" x 48" Jointer w/Knock-Stand
Model G0813, Ser# 1916303. Portable base, Includes Manual, Like new condition, 

Table adjustments are a breeze with convenient lever-action for the infeed side and precision handwheel adjustment for the outfeed side.
The center-mounted, heavy-duty fence has stops at 45°, 90° and 135°, with an extra-large handle for complete control when setting the bevel angle
 

SPECIFICATIONS:

  • Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A
  • Maximum width of cut: 6"
  • Maximum depth of cut: 1/8"
  • Maximum rabbeting depth: 1/2"
  • Cutterhead diameter: 2-1/2"
  • Cutterhead type: 3-knife
  • Knife Size: 6" x 1" x 1/8"
  • Cutterhead speed: 5000 RPM
  • Table size: 6-5/8" x 47-3/8"
  • Fence size: 29-1/8" L x 4" H
  • Minimum stock length: 8"
  • Minimum stock width: 3/4"
  • Minimum stock thickness: 1/2"
  • Dust port size: 4"
  • Footprint: 14-1/4" x 27"
  • Overall dimensions: 47-1/2" W x 20" D x 42" H
  • Approx. shipping weight: 252 lbs.

FEATURES:

  • "Economy" cabinet stand with built-in mobile base
  • Precision-ground cast-iron infeed & outfeed tables
  • Tables slide on dovetailed ways
  • Heavy-duty center-mounted fence with stops at 45°, 90° & 135°
  • Cabinet-mounted power switch with safety key
  • V-belt drive
  • Shielded & lubricated bearings

106
New 40' Shipping Container
High cube, multi-door, shipping container, 4 side doors, end doors, 9'6'' high, 8' wide.

105
Grizzly - Sliding Router Table
Model G0528, Ser# 005168, Like New Condition

The G0528 Sliding Router Table allows accepts most 3/4 HP – 5 HP routers to be mounted to the table underside with the spindle and cutter protruding upward from the table.

Similar to a shaper, the workpiece is slid along an adjustable fence and into the cutter.

Unlike a shaper, the G0528 has a sliding table feature where the table moves with the workpiece into the cutter. This design improves workpiece control, especially when routing the end grain of a workpiece.

For support on both sides of the workpiece, the sliding router table is equipped with a split-rail type fence. The split fence is easy to adjust and provides full support along both sides of the workpiece.

A large safety paddle switch in the frame allows you to conveniently turn the router ON/OFF without bending over and reaching under the table.

Other features include a 2-1/2" dust hood, tilt-up table for easy router access, universal router mount, and sturdy stand with a convenient shelf
 

SPECIFICATIONS:

  • Main table surface: 31" x 10" x 1-3/4"
  • Sliding table surface: 31" x 12"
  • Suitable routers for mounting: 3/4 HP – 5 HP
  • Table counterbore: 3-1/2"
  • Table insert diameters ID: 1-1/8" and 2-5/16"
  • Table height: 34"
  • Fence size (x2): 3" x 12"
  • Dust port: 2-1/2"
  • Recommended CFM at dust port: 150 CFM
  • Approximate shipping weight: 132 lbs.

FEATURES:

  • Sliding table includes hold-down clamp for securing workpieces
  • Convenient front-mounted switch
  • Accepts practically any brand of portable router from 3/4 HP to 5 HP
  • Table can be tilted 45° for convenient router installation
  • Extruded aluminum sliding table and fence
  • Sliding table provides an effortless and extremely smooth operation

107
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses.

108
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

124
Flatbed for 1-Ton
It is 8' wide x 8 1/2' long, built by Freedom Truck Beds and has a trap door for gooseneck hitch.  

118
* Black Husky Rolling Toolbox
52 x 24.5 x 38H Has 9 drawers and 4 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs.

109
New Bastone 2 Portable Restroom Stalls
The Bastone 2 private stalls portable restroom features a toilet, a sink, a light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. 
  • Dimensions (ft): L4.3*W7*H7.7 
  • 1/2" female inlet ports for hot & cold water
  • 3" black water/waste exhaust flexible hose (easily slide your 3" PVC pipe onto flex fitting for waste)
  • 1" PVC water outlet exhaust port (for sink water)
  • Bowl Shape: elongated
  • Mount type: wall mounted
  • Flush volume: 1.6 gpf
  • Condition: New

125
2 in 1 Lathe
It is in working condition, model ENCO10-1010

119
* Red Milwaukee Rolling Toolbox
61 x 22 x 38H Has 11 drawers, 1 door, and 6 casters. Also has metal peg board. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Several small cosmetic damages.

110
New Dome Storage Shelter
30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box. Snow rating of 400 lbs per square meter.

126
MultiQuip Whiteman Series HTX Ride-on Power Trowel
Trowel is powered by a 1.5L Kubota diesel engine. Meter reads 350 hrs. only! It also has a retardant reservoir, front and rear lights, and runs great.

120
* Silver Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Missing 1 handle.

111
New Steelman Work Bench Toolbox
Model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

127
Gorbel 5-ton Wall Mount Jib Crane
Crane is powered by a Coffing 5 ton electric chain hoist that is 460 volts, 3 phase. Chain hoist has trolley and pendant control. Jib is approx. 10' long.

121
* Silver Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Missing 1 handle.

112
New Steelman Work Bench Toolbox
Model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

128
New Wood Stove
New wood stove, 115'000 BTU, 85 gallon water capacity, 15 cubic feet firebox, full water jacket, 1'100 lbs, 42'' wide x 52'' long x 54'' high.  Model NCB-80 

122
* Black Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs.

113
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Stainless Steel, pictures coming soon. 

129
Concrete Equipment
Whiteman 48'' Trowel that has sat for a few years but ran when it was put away,  It has a Honda GX240 8.0 hp gas engine.  4' and 5' bull floats and a viber strike board.  

123
* White Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Several dents on left side.

114
New Steelman Work Bench Toolbox
Model 7ft-10D It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Stainless Steel, pictures coming soon.

130
Barn Door Track
72' total. All brackets and rollers included. Can be hung single or double.

115
New Steelman Work Bench Toolbox
Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Red in Color

131
Somero Mini C Laser Screed
2004 year model, Subaru engine, 7' wide, in running condition, instruments included, SN: 550530309.    

116
New Highway Safety Cones
Brand new safety cones.  Quanity 250, pictures coming soon.

132
Miller Thunderbolt XL Welder
Serial # MB3411125Y, no leads

117
New Highway Safety Cones
Brand new safety cones. Quanity 250, pictures coming soon.

133
Pallet of Misc Shop Tools and Supplies

1000
1930 Ford Model A Truck
It had a frame off restoration 15 years ago by the late Art Haynes and has been in the same family since 1950.  It has the original 4 cylinder engine and 3 speed manual transmission and the miles are unknown.  Everything is period correct, it runs and drives as it should, the paint does have minor flaws and is approximately a 7 out of 10.  Call Bronson with questions 574-210-3721

118
New Self Dumping Hopper
1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom,

134
9'' Rockwell Delta Table Saw
Table saw only.

118A
New Self Dumping Hopper
1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom,

135
Wooden Cider Press
A little work, and it would be in working condition.

119
New Ratchet Tie Downs
Brand new 16 pieces  2'' x 27' and 8 pieces 1.5'' x 27' pictures coming soon. 

136
Air Compressor
2 hp electric motor,120 volt, good working condition. 

120
New Rigging Hardware 38 Piece
Quanity of 38 pieces, 4.75t-12t.  Pictures coming soon. 

137
5th Wheel Hitch
Curt E16 5th wheel hitch, in good condition and hardware is included. 

121
New 2T-5T Webbing Sling 22 pieces

138
Liftmoore Truck Crane
Mounts to truck bed unknown working condition. 

122
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling

139
Barrel of Busperse 293 (x1) and Busan 1009 (x2)

123
New Hot Water Pressure Washer
4'000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport, 

140
Titan TTS1400 Track Saw
It includes the saw, extra blade, 3-tracks and track connectors, 

141
New Holland Skid Loader Wheels
Set of 4 size 16.5 x 9.75, 8 lug with 8'' bolt pattern and 6'' center hole. 

142
Natural Gas Hot Water Pressure Washer
MI-T-M pressure washer that heats with natural gas and is in working condition, Model: HEG-3005-0E4G

143
Ingersoll Rand Screw Style Air Compressor
It has a 120 gallon tank, is 3-phase 480 volt and is in working condition.  Model: SSR UP6-25-125
 

144
Lumber Racks (X4)

145
Lumber Racks (X4)

146
Lumber Racks (X3)

147
Lumber Racks (X4)

148
Lumber Racks (X4)

149
Wire Baskets (7) Various Sizes

150
Baldor Electric Motors (X3)
They are 5 hp and 3-phase. 

151
Pallet Racking (5) 12' x 48'' Uprights (15) 96'' Beams (2) 122'' Beams

152
Pallet Racking (1) 10' x 42'' Upright (4) 9' Beams (4) Wire Decks

153
48'' x 55'' Wire Decks for Pallet Racking (32)

154
48'' x 55'' Wire Decks for Pallet Racking (32)

155
Stackable Wire Baskets

156
Stackable Wire Baskets

157
Metal Parts Bins

158
Metal Parts Bins Various Sizes

159
Metal Parts Bins Various Sizes

160
Metal Parts Bins and Rack

170
Self Dumping Hopper
6 yard.

171
Self Dumping Hopper
5 yard.

172
Self Dumping Hopper
4 yard.

173
Self Dumping Hopper
3 yard.

173A
Self Dumping Hopper
2 1/2 yard.

174
Self Dumping Hopper
2 yard.

175
Self Dumping Hopper
1 1/2 yard.

176
Self Dumping Hopper
1 yard.

300
John Deere X300 Riding Mower
It has a 17hp Kawasaki V-twin engine, hydrostatic transmission, only 527 hours, cruise control, adjustable height mowing deck, runs and operates as it should and will have a new seat installed.  Serial Number: M0X300C049244

301
Trac-Vac Leaf Vac System
It has a Briggs & Stratton Intek Pro 206 engine with both electric and recoil start, pulls with draw bar style hitch and is in good working condition.  

302
New Ryobi RM300e Lawn Mower
Brand new and never used!  It has a 48 volt 50 amp hour battery that is capable of 1 hour of run time or 1 acre of mowing.   It has a 30'' mowing deck, 7-position deck adjustment, weighs 442 lbs, comes with a new battery charger for standard 120 outlet.   

303
Stihl Chainsaw
Model 038AV., has a 20'' bar, completly rebuilt, broken handle and is in good working condition. 

304
1991 Suzuki LT80 ATV
Not currently in running condition, 2-stroke, automatic transmission, does turn over and unit is complete, Bill of sale only.   VIN: JM4AC11A2M1100634

305
2003 Polaris Sportsman 90 ATV
Not currently in running condition, 2-stroke, automatic transmission, does turn over and unit is complete, Bill of sale only. VIN: RF3FA09C43T066380

306
2005 KTM SX85 Dirtbike
It is an 85cc with a manual transmission, it is not currently in running condition, engine does turn over, it is mostly complete.  Sells with a bill of sale only.  

177
Bartell Trowel
It is a 7' wide ride on trowel that is powered by a Honda GX620 20hp V-twin engine and has only 114 hours.  Works and runs excellent. 

307
2018 Kawasaki Mule 4010
It has a twin cylinder 620cc gas engine with an automatic transmission with only 454 hours, 4-wheel drive, locking differential, fully enclosed cab with heat, electric dump bed, LED lights, tow hitch.  It is in excellent running condition.   

178
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

308
Yamaha Electric Golf Cart
Includes 36V battery charger. Was represented as working, however WE AT THE AUCTION SITE HAVE NOT BEEN ABLE TO GET IT TO MOVE. IT BEEPS IN REVERSE AND THAT IS ALL IT DOES.

179
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

309
EZ-GO Golf Cart
Electric golf cart in working condition and sells with the charger.  

180
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

310
MTD Snow Blower
It has a Tecumseh Engine, self propelled, single stage chute, recoil start, not currently in running condition. 

181
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

311
John Deere F725 Riding Mower
John Deere F725, PIN: M0F725X041354, meter shows 2'306 hours, It has a Kawasaki F590 liquid cooled v-twin engine, hydrostatic transmission, 54" mower deck and power steering. It has a recent tune and service and everything works as it should. Contact Tim Graber 269-986-5693

182
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

312
Deines Magnum 2000 OHV Riding Mower
Ser# K 1803, It has a 20 hp Kohler motor, meter shows 1212 hrs. It has a 60 front deck with new blades. Just had a full service and everything runs except it needs a new clutch. Contact Tim Graber 269-986-5693

183
Stone Conveyor
Hydraulic power, folds for transport

753
1995 Load King Detach Trailer 50 Ton
50-ton Detatch Trailer. The main deck is 8 1/2' wide x 27' long, It has new air lines, 4-newer tires and some at or below 25%. It is self contained and powered by a Honda 390cc GX series engine that has electric start, works and operates as it should.   VIN: 1B4L51351S1119603 Call Bronson with questions 574-210-3721

313
Lifetime Garden Shed
92" x 116" x 95" high at peak. Has double doors and 3 windows. Doors don't shut quite right.

184
Catwalk Steps

314
Simplicity Riding Mower
It is a 16 LTH with a 44'' mowing deck and has a 16 hp Briggs and Stratton Van Guard V-Twin engine with a hydrostatic transmission.  Works and runs. 

185
9' Auger and Chain

315
Ariens Riding Mower
Not in working condition, does have a mower deck and a Briggs and Stratton 18hp engine, 

186
Gas Powered Blower
It has a 3.5 hp Briggs and Statton engine and is in unknown running condition. 

316
Toro Stand-on Aeriator
Model 23518. Meter reads 414 hrs. Powered by a 14.5 HP Kawasaki engine. Very good running machine.
SN: 312000129

187
Roll of Hydraulic Hose

188
Hydraulic Winch
Unknown working condition. 

317
* Honda 4-Wheeler
Honda TRX350 4X4  4-wheeler,  it is not in running condition. 

189
New Electric Motor
3-phase, 460 volt, 36 Kw

318
* Kubota Lawn Mower Lift
In working condition.

190
New Electric Motor (x2)
3-phase   1.5 hp

319
* John Deere GX345 Riding Mower
It has a Kawasaki 20 hp liquid cooled V-twin gas engine, hydrostatic transmission, 743 hours, 54'' mowing deck, power steering, new battery, hydraulic deck lift, cruise control and a cup holder.  Product ID Number: M0G345B112505

191
New Electric Motor (x2)
Both are 3-phase and brand new,  Sells with a box of electrical parts. 

320
* John Deere 345 Riding Lawn Mower
It has a Kawasaki 18 hp liquid cooled V-twin gas engine, hydrostatic transmission, 1'177hours, 54'' mowing deck, power steering, new battery, hydraulic deck lift, cruise control. Product ID Number: M00345B021894

192
Table Saw & Bench Grinder
Dewalt table saw with a 8'' blade that can cut up to a 45 degree angle and a bench grinder that is on a stand.  Both are in working condition. 

321
* Coleman Powermate 4'000 Watt Generator
8 Hp Briggs & Stratton engine, in good working condition. 

193
Rolling Bag Cart
3' x 6' x 11" tall. Missing 1 handle. Writing on cart is: Nutting Faribault, MN.

322
* John Deere 265 Lawn Tractor
Powered by a FC 540V, OHV engine. 48" mower deck. Hydro drive. A little TLC, and this one could be in good running condition.

194
Reese 5th Wheel Hitch
14K lbs. Has quick slide.

323
* Huskee Quick Cut Lawn Tractor
Powered by a Briggs 16.5 HP engine. Has a 7 speed transmission. No deck and no key. Motor runs great. A little TLC, and this could be a good running tractor.

195
Air Compressor
It has Lincoln Electric 15 hp 3-phase motor, 230/460 volt, 120 gallon and is in good working condition. 

324
* Toro Riding Mower
It has a 16 hp Briggs & Stratton engine, hydrostatic transmission, 44'' adjustable height mowing deck. Not currently in running condition. 

196
Coleman Power Station 10000 Standby Generator
Powered by a Briggs 570 V-Twin engine that runs on LP or NG. Meter reads 397 hrs. Power output is 120/240 V, and 10,000 watts on LP, or 8500 watts on NG.
SN: A07510076
Model #: PM0621011.02

325
* Briggs & Stratton Engine
8 hp engine, side shaft, electric and recoil start. in working condition. 

197
Sentry-Pro by Gillette Standby Generator
Meter reads 236 hrs. No generator.

326
* Yard Machine Riding Mower
It has an 18 hp twin cylinder Briggs & Stratton engine, 7-speed transmission, 42'' mowing deck with 5 position adjustment, starts and runs. 

198
Skid Of 2 Motors and 2 Generators for Standby Generators
All parts come out of standby generators that run on LP or NG. One generator is a 9600 watt, 120/240 V, and the other one is a 9500 watt, 120/240 V.

327
* 5000 Watt Coleman generator, Spreader, Gas can
Coleman 5000 watt generator with 10 hp Tecumseh engine. It was last run 1 year ago and it ran good. Boat motor gas can. Fertilizer spreader. Tim Graber 269-986-5693

199
Coleman Power Station 10000 Standby Generator
Powered by a Briggs 570 V-Twin engine that runs on LP or NG. Meter reads 237 hrs. Power output is 120/240 V, and 10,000 watts on LP, or 8500 watts on NG. Works great.
SN: A06310008
Model #: PM0621011.02

328
* Toro Z Master ZTR Commercial Mower
It has a Kohler Command SP27 engine, hydrostatic transmission, 64'' mowing deck, bagger system included, 2'640 hours, new hydrostatic and drive motors last year. 

200
Coleman Power Station Standby Generator
Powered by a Honda engine that runs on LP or NG. Meter reads 261 hrs. Generator output is 120/240 V, 10,800 watts on LP, and 9200 watts on NG.
SN: B2111175
Model #: PM401211

329
* Ransomes Bob-Cat Riding Mower
It has a 72'' mowing deck, 3-cylinder diesel engine, 2'214 hours and is in running condition. 

201
Standby Generator
Powered by a Kohler engine. Meter reads 305 hrs.

330
* EG 1400X Generator/Battery Charger
Powered by a Honda engine. Charges at 12V, 8.3A, and gen. output is 1400 watts max, at 120V. In working condition.

202
Briggs and Stratton Standby Generator
Empower series. Generator output is 7000 watts, 240V. LP/NG
SN: 1016978936
Model #: 040301

331
* Pair of 4 Wheeler tires
AT20X10R9 tires.

203
Briggs and Stratton Standby Generator
Empower series. Generator output is 7000 watts, 120/240V. LP/NG
SN: 1015471018
Model #: 040220

332
* 20 Ton Yard Machine Log Splitter
Serviced a year ago. Everything works. Powered by a Briggs engine.

204
Coleman Power Station 15000 Standby Generator
Powered by a Vanguard Daihatsu engine that runs on LP or NG. Meter reads 457 hrs. Generator output is 15,000 watts on LP, or 13,500 on NG, 120/240V. Needs new actuator motor.
SN: A21311230
Model #: PM0621512.01

332A
60" Toro 520-H (Wheel Horse) Lawn Mower*
Model 73501, Ser# 3900802, 20hp Onan Gas Engine, Hydrostat, 60" deck, only 544 hrs, 3-brand new blades, good tires, Hitch, gauges work, lights, Runs Good!

205
Tiger Power Standby Generator
Powered by a Kohler engine that runs on LP or NG. Meter reads 130 hrs. Generator output is 12,000 watts, 120/240V.
SN: 020054
Model #: G12AK01

333
* Orec Brush Rover
Ride on brush mower with only 63 hours, It has a Briggs & Stratton Vangaurd 21 hp v-twin gas engine and hydrostatic drive transmission, 4-wheel drive, adjustable height deck, extra blades included. 

206
Dayton Trailer Stabilizing Jack
5000 lb. lifting capacity. Like new.

334
* Simplicity Riding Mower With Snowblower
It has a 16 hp Briggs & Stratton Vanguard V-twin engine with a hydrostatic transmission, 44'' adjustable height mowing deck, bagger system, single stage snow blower, tire chains, 512 hours, in good running condition, 

207
Intellimatic Kwikstart Pro 12V Battery Charger
Fully automatic. 10 A. Engine starter. Missing on/off knob.

335
* 2010 Grasshopper 930D ZTR Mower
It has a 30 hp 3-cylinder Kubota diesel engine, 3'573 hours, a cab with a heater that comes with a custom stand for storage, adjustable height deck, a 64'' Sweepster rotary broom, extra wheels, tires, belts and misc parts. It is in good running condition. 

208
Eagle Fiberglass Containment Pallet
50.5" x 50.5". 4 drum. Low profile. Brand new.

336
* Toro ZTR Mower
It has a 42" mowing deck, 17.5 hp 500cc Briggs & Stratton Intek engine the was replaced 2 years ago, runs and operates as it should. 

209
Dock Plate
Diamond plate. 5000 lb. capacity.

337
* Huskee LT4200 Lawn Tractor
Huskee LT4200 riding lawn tractor with a 42 inch deck. It is powered by a 17.5 hp 420 cc Powermore engine. Everything works like it should. Contact Tim Graber 269-986-5693

210
Dayton Barrell Turner
Has fork pockets.

338
* John Deere Lawn Sweeper
John Deere tow behind lawn sweeper with string pull dump. In good working condition. Contact Tim Graber 269-986-5693

211
Dayton Power Vent
Model: DVR2A.

339
* John Deere 10P Dump Cart
John Deere tow behind dump cart. It has 10 cu. ft. capacity and a 650 lb. hauling capacity. Contact Tim Graber 269-986-5693

212
Snow Ex Salt Spreader
12V powered.

340
* 2 Diamond Plate Toolboxes
2 aluminum diamond plate toolboxes for a pickup truck. One is a Challenger top mount with 2 doors and the other is Seal-tite low profile side mount with a single lid. Contact Tim Graber 269-986-5693

213
Electric Exhaust Fan
38" wide. No motor.

341
* 3 Diamond Plate Toolboxes
3 aluminum diamond plate toolboxes for pickup trucks. There is one Delta black single lid, crossover toolbox and a matching pair of Owens low profile, side mount toolboxes. Contact Tim Graber 269-986-5693

214
Electric Exhaust Fan
44" wide. No motor.

342
* 2 Stihl SG20 Backpack Sprayers
These are manual sprayers with a 4.75 gallon capacity. They have a pressurized fluid reservoir seperate from the main tank. In good working condition. Contact Tim Graber 269-986-5693

215
Canarm Electric Exhaust Fan
Model: AX42-7. 42" wide. Includes louver and shield.

343
* 2 Pressure Washers
There is one Excell pressure washer with 2400 psi and 2.5 gpm and comes with a 50 ft. hose. It is powered by 5hp OHV Honda engine in good working condition. There is one Craftsman 2600 pressure washer with a GVC 160 Honda engine. The engine runs but is missing the pump. Contact Tim Graber 269-986-5693

216
Canarm Electric Exhaust Fan
Model: AX42-7. 42" wide. Includes louver and shield.

344
* Stihl MM55 Cultivator
This unit has a 8.5 inch width and comes with the option to add additional attachments. It has a gas motor in good working condition. Contact Tim Graber 269-986-5693

217
Exhaust Fan Louver
48" wide.

345
* Simpson Professional Pressure Washer
This unit has 4000 psi and 3.5 gpm and comes with a 50 ft hose. It is powered by a GX 270 Honda engine in good working condition. Contact Tim Graber 269-986-5693

218
Exhaust Fan Louver
48" wide.

346
* Charbroil Grill
This LP grill is stainless steel and has 4 burners with a side burner. It also has an electronic ignition and everything is in good working condition. Contact Tim Graber 269-986-5693

219
Durham Metal Drawer Cabinet
48 drawers.

347
* Platform Cart and 2 Tanks
Platform cart with swivel wheels. Includes 2 sprayer tanks. Contact Tim Graber 269-986-5693

220
Durham Metal Bolt Bin
40 holes.

347A
A 1400 Generac Generator*
Model 8967-0, Ser# 0865152, 1350 watt, 120 volt, 11.3 amps, it runs other wise condition unknown.

221
Eagle Plastic Dock Plate
For hand trucks only. 31" wide.

348
* Simplicity Sun Star Lawn Tractor
Powered by a Briggs V-Twin 18HP engine, that runs great. Meter reads 1593 hrs. Has just been serviced. 48" deck. Power steering. Hydro drive.
SN: 1113

222
Fluid Kinetics Silencer
Model: BOS 20-73-73. 6' long.

349
* Simplicity Sun Star Lawn Tractor
Powered by a Kohler engine that runs great. Meter reads 1674 hrs. Just been serviced. 48" deck, power steering, and snow blade. Hydro drive.
SN: 2128

223
Pressurized Sand Blaster

350
2001 Kawasaki Bayou 220 ATV
It has an air cooled 220cc single cylinder engine, 5-speed transmission with reverse, 2-wheel drive, shaft final drive, does not currently have a battery but does start with the recoil starter.  VIN: JKBLFBA121B802897 

224
Buzz Saw
30" blade. Roller bearings.

351
John Deere 737 ZTR Mower
It has a 23hp Kawasaki V-twin engine, 2'059 hours, 60'' adjustable height mowing deck, and is in good working condition.  Product ID Number: TC0737B061385

225
Hercules Forklift Maintenance Platform
34" x 35".

352
Exmark Turf Tracer Lawn Mower
It has a 17 hp Kawasaki V-twin engine, 52''  mowing deck 6-speed transmission and is in good working condition.  

226
Skid of Misc.
Bearings, sprockets, and misc.

353
* Ranch King Dump Trailer
34"W x 58"L  17 cu. ft.

227
Skid of Flat Bed Truck Sides

354
* Airens Front Tine Tiller
Powered by a 5HP Briggs engine.

228
Powerboss Floor Sweeper
In good working condition, built in 2005, has an LP powered 4-cylinder Nissan engine with only 501 hours and comes with the manuals, weighs 3'600 lbs  Model TSS82.  Serial Number: 14895035

355
Custom EZ-GO Electric Golf Cart
It has been rebuilt and customized and only been used 2 months since.   It comes with a custom lime painted body, custom black/lime upholstery, chrome wheel covers, rear facing seat or fold down for cargo,  street light package with headlights, tail lights, brake lights, turn signals and horn, upgraded factory style, rear grab bar, hitch with receiver, 5-panel mirror, new windshield and batteries.   

400
Eccles & Chain Panel Saw
Beam type traveling head straight cut panel saw. In good working condition, 3-phase power.    Call Bronson with questions 574-210-3721

229
Jet 10" Table Saw
Model: JWSS-10LFR. 110V 78" table. Has Micro glide precision rip fence and guard. Works.
SN: 02123132

401
3 Head Baker Resaw w/ Return
With fully adjustable width, 20 hp electric motors, 1 1/4'' bands, with return, in good working condition. Model Number: BBR-O Serial Number: 91-258 Call Bronson with questions 574-210-3721

230
Shop Fox Edge Sander
Model: W1688. 220V Extra belt. Uses 8" x 80" belt. Works good.
SN: 653326

402
Wood-Mizer LT40 Sawmill
It is powered by a Lincoln Electric 25 hp 3-phase motor, is fully hydraulic, includes set works, hours are unknown, not currently portable, in good working condition, Serial Number: 456C62419YNBH6337
Call Bronson with questions 574-210-3721

231
Acetylene Torch Set
Cart included.

403
Chop Saw
20" blade, 10 hp 3-phase electric motor, 10' and 13' conveyors, in good working condition. 
Call Bronson with questions 574-210-3721

232
Millermatic 185 Wire Welder
Tank included. Works, but wire feed hesitates some times.

404
Valley Machine Works Junior Edger
It is powered by a 15 hp 3-phase electric motor, includes in feed and out feed, 3-blade adjustable width, 24'' wide capacity, in good working condition. 
Call Bronson with questions 574-210-3721

233
500 Gallon Air Tank

405
Whirlwind Up Cut Saw
16'' blade, 3-phase power, good working condition. 
Call Bronson with questions 574-210-3721

234
Skid of Wire Baskets

406
Cat Claw Blade Sharpener
120V electric power and in good working condition. 
Call Bronson with questions 574-210-3721

235
Skid of Wire Baskets

407
Blade Setter
In good working condition. 
Call Bronson with questions 574-210-3721

236
Skid of Wire Baskets

408
Zeno Grinder
Top feed grinder in good working condition, it has electric drive and self contained hydraulics for the ram, 480v 3-phase motor, 
Year of Manufacture: 1997
Model: ZTLL 1600 x 1800
Serial Number: 97 A-4535 
Call Bronson with questions 574-210-3721

237
2 Ton Floor Jack
Works.

409
John Deere Power Unit
It is a 8.1 liter John Deere diesel that makes 225 horsepower with a Rockford clutch and has 14'647 hours and is in excellent running condition.  Engine Serial Number: RG6081A058663

238
Lot of Misc.
Includes Lincoln 12V grease gun, Homelite one hand chain saw, and a Task Force electric chop saw.

410
Rotorcomp Air Compressor
Screw style air comptressor, currently set up for belt drive, in working condition.  

239
Stihl TS700 Concrete Saw
In working condition.

411
Rotorcomp Air Compressor
Screw style air comptressor, currently set up for belt drive, in working condition.

240
Lot of Misc.
Includes a Stihl leaf blower, Echo leaf blower, and an Echo hedge trimmer.

412
Edmiston Circle Mill
4 HB 15' carriage with hydraulic dogs and air setworks. Cab, 56' track, and husk with top saw.

241
Trail FX Tool Box
Side mount.

413
New Sawmill
It is all manual, has a Kohler Command Pro 14 HP 429cc gas engine with electric start, 1 1/4'' band and comes with 4 sections of 80'' track. 

242
Masterforce Truck Boxes
Includes 2 boxes. One has a bunch of tools.

414
Wood-Mizer Sharpener
Model S-04, not in working condition. 

243
Pair of Trailer Jacks

415
Blade Setter

244
Lot of Misc.
Includes gooseneck ball and chain hook kit for GM pickup puck system, remote LED spotlight, ratchet tie-downs, and LED marker lights.

416
Conveyors
One is 16'' wide x 10' long and the other is 12'' wide x 18' long.  It comes with a box that contains a motor and control box. 

245
Pelican Paddle Boat
In like new condition. 4 person. Adjustable front seats.

417
Diehl Straight Line Rip Saw
It has been tested and works as it should, feed chain is in excellent condition and works as it should, It has a 3 1/2'' depth cut with a 16'' blade, 21'' throat depth, overall table size is 68'' x 52''

246
Gererac 7'000W Standby Generator
It has a Generac 407cc engine that runs on LP or natural gas, 7'000 watt, hours are unknown, auto start and is in working condition. 

418
* Kubota Genset
It is rated at 12.5 kva and is powered by a Kubota V-1505 4-cylinder diesel engine, It is single phase , has auto start, roughly 2'500 hours, only 30 hours on a complete rebuild that includes a new crankshaft and piston rings, dyna gen control panel.  Runs and operates as it should. 

247
Wet Kit for Semi
It has a new pump and PTO, 2-way pump for high and low volume. 

248
Rear Door For Dump Bed
80" wide.

419
* Heartland Fabrication Chop Saw
Model: C5200. Powered by a 3PH electric motor. Has infeed and outfeed and 2 stops. 20" blade. 16' long.

249
Over-the-tire Steel Skid Loader Tracks
Complete.

420
* 3 Strand Transfer Deck
Electric drive. 3HP, 3PH motor. Rooftop chain. 16' long.

250
4" Water Valves
4 total.

421
* American Lifts Lift Table
44" x 114"  8000 lb. lift capacity.

251
Tote of Parker Hydraulic Hoses
Mainly 1 1/2".

422
* Conveyor Belt
Fits under Zeno grinder, lot # 408. Electric drive. 8' long.

252
Tote of Parker Hydraulic Hoses
Mainly 1", some 1 1/2".

423
* Chop Saw
Has infeed, outfeed, and 3 stops. Powered by a 3PH motor. 21' wide. It is disassembled.

253
Twin Air Tanks
They come off of an Ingersoll Rand air compressor.

424
* Jacobson Blower
12" inlet and 13" outlet. 25HP 3PH motor

254
Skid of Parker Hydraulic Hoses
2" and 1 1/2".

425
* (3) Roll Cases
16" wide x 10' long

450
Badger Round Baler
Baler uses twine. Belt length is 437".

255
12V Powered Triple Hose Reel
Stainless steel housing. Missing 2 motors.

451
New Holland 489 Haybine
This unit is field ready, has a new jack, and good rollers.
SN: 651899

256
Ammco Semi Tire Changer
Complete. Needs one electric motor.

452
New Holland Hay Rake
Has extra teeth included.

257
Engine Hoist
Works.

453
John Deere Spring Tooth Harrow
Has extra Hiniker teeth mounted on back.

258
Sand Blaster

454
Gravity Wagon
Box sits on a J & M running gear. Has extra sides.

259
30 Gallon Gas Tank
No holes.

455
Parker Gravity Wagon
Box sits on a J & M running gear. Has extra sides.

260
2 Exhaust Fans
38" fans.

456
Hay Wagon
Older hay wagon, in working condition.

261
Flat Bed Extender
To extend the flat bed on your truck. 94" x 27"

457
John Deere 230 Disk
Type: T0230 double disk. 12.5' center section with (2) 4' wings. No jack included. Great shape.
SN: 018068

262
Truck Ramps

458
30' All American Standard Grain Elevator
Model 4000. Grain spout included. Powered by 5.5 HP Honda motor. Good shape.
SN: B-359

263
Engine Stand
750 lb. capacity.

459
Old Box Wagon
Wooden running gear with steel wheels. Says "Sold by WM Seymour, Plymouth, IN" on side.

264
Stinger 2007 Engine Stand
750 lb. capacity.

460
John Deere Van Brunt 15 x 7 Drill with Grass Seed Attachment

265
Engine Stand

461
30' John Deere Elevator
For hay or ear corn, ear corn chute included and comes with a Honda GX160 gas engine. 

266
Lot of New Tires and Rims
8 lug bolt pattern, 6.5" lug to lug, and 4.5" center hole on rims. Rims are not quite new. Tires are Laredo LT225/75R16.

462
John Deere 11 Shank Chisel Plow

267
Truck Bulk Head
70" wide.

463
Ford 3-Point Brush Mower

268
Industrial Metal Bandsaw
120V

464
Hitch Pull Brush Mower

269
2 Ton Chain Hoist

465
4 Section Spring Tooth Harrow

270
Crown Pallet Jack
Brand new. 5000 lb. capacity. Model: PTH 50

466
2 Row Pull Type Disc

271
Wright Self Dumping Hopper
54" x 62"

468
9' Brillion Cultipacker

272
Self Dumping Hopper
34" x 49"

469
1'000 Gallon Sprayer
50' boom, ground driven sprayer, rinse tank. 

273
GalFab Self Dumping Hopper
1 yd.

470
New Holland Super Hayliner 68
It is field ready, gone through by King Repair in 2019 and has never been rained on.  

274
Self Dumping Hopper
54" x 59"

471
* Altec DR160S Round Bale Unroller
Built in 2015 and has had little use. It can handle bales up to 5' wide, Hydraulics plug into tractor to be operated or it also has a hydraulic lever that can be operated from the ground.   

275
Wright Self Dumping Hopper
54" x 62"

472
* Agstar Calf Feeder w/Pen
Pen is 52" x 6'. Feeder is in decent shape.

276
New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

473
* Hay Wagon
7.5' x 14'. Sits on a Gehl running gear. Has spare tire. No rack.

277
New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

474
* Hay Wagon
7' x 14'. Has rack.

278
New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

475
* Hay Wagon
7' x 15.5'. Has rack. Floor has a couple holes.

279
New Teardrop Pallet Racking
Includes (3)-12' x 48" uprights, (8)-9' beams, (4)-46" wire decks, and (4)-58" wire decks.

476
* Hay Wagon
7.5' x 14'. Has rack.

280
New Teardrop Pallet Racking
Includes (3)-12' x 48" uprights, (8)-9' beams, (4)-46" wire decks, and (4)-58" wire decks.

477
* Hay Wagon
7' x 16'. Has rack.

281
Lumber Racks (X2)

478
* Hay Wagon
7' x 14'. No rack.

282
Lumber Racks (X4)

479
* Hay Wagon
7' x 14'. Has rack.

283
Lumber Racks (X4)

480
* Agstar Calf Feeder w/Pen
Pen is 52" x 6'. Feeder is in decent shape.

284
Lumber Racks (X4)

481
* Horsey Inc. Horse Treadmill
Powered by an electric motor. Includes panel box w/ 30A, 125/250V plug. New belt and motor a year ago.
SN: H178262

285
Lumber Racks (X3)

482
* Parker Gravity Wagon
Sits on Gehl running gear. Has extendable tongue.

286
Lumber Racks (X4)

483
* John Deere P7000 Corn Planter
8 rows wide. Includes bean meters, corn meters, and a monitor. New hoses recently. Won't lift evenly.
SN: 065760A

287
Lumber Racks (X4)

484
* 24' Portable Feed Bunk
5' wide.

289
Wire Baskets (X4)

485
* 2 Rolls of Horse Fence
Not complete rolls. 4' tall.

289A
Wire Baskets (X4)

467
3-Point Disc

486
* Bunk of Fencing Supplies
Approx. 40 wooden posts, 4' farm gate, and 8 braces.

289B
Wire Baskets (X4)

289D
Wire Baskets (X5)

487
* Case Int. 8455T Round Baler
Uses twine. In good working condition.
SN: CFH0080346

500
John Deere 250 Skid Loader
It is powered by a John Deere 2.9 liter 3-cylinder turbo charged PowerTech diesel engine that is rated at 64 hp.  It has a lift capacity of 1'750 lbs, sells with a bucket, auxiliary hydraulics, quick attach, 400 lbs of counter weight, hand and foot controls, 3'673 total hours, meter has been replaced.  This is a 2nd owner machine and has never been worked hard, parking brake is disconnected.   Product ID Number: KV0250A251724  Call Bronson with questions 574-210-3721

289C
Wire Baskets (X2)

501
Gehl 5410 Skid Loader
Gehl 5410 comes with a 66'' bucket, 1'150 lb lift capacity, has new battery, Ford 4-cylinder gas engine, hours show 7'272 but not correct, hand controls, starts and runs as it should.   Serial Number: 3052  Call Bronson with questions 574-210-3721

289E
Wire Baskets (X3)
Includes steel framed crate that has fork pockets.

502
2015 CAT 257D Skid Loader
It is powered by a CAT C3.3B DIT turbo diesel engine rated at 73 horse power and is a 2-speed and has only 2'238 hours.  It has a lift capacity of 1'960 lbs rated at 35% of tipping load.  It also comes with a full cab with heat and air conditioning, a heated air suspension seat, back up camera, hand controls, auxiliary hydraulics, hand controls, counter weights, LED lights, stereo ( not working), power attach, 72'' bucket, code start and more.  It is a 2nd owner machine, has new tracks at 1'950 hours, all new fluids and filters, very clean inside and out.  PIN: CAT0257DLEZW01936

290
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

503
Bobcat MT52 Mini Loader
Bobcat MT52 Mini walk behind track loader with 4'014 hours.  It is powered by a 3-cylinder 20 hp Kubota diesel engine and has a lift capacity of 520 lbs. It has a 36'' bucket, quick attach, auxiliary hydraulics,good tracks,  ride on dolly, new drive belt, engine and radiator replaced approximately 1'500 hours ago and is in good working condition.   Serial Number: 528711672
***Update***   Brand New Tracks!!!

290A
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

504
2016 CAT 232D Skid Loader
It has a 4-cylinder  2-speed CAT C2.2 turbo diesel engine rated at 68hp, 1'728 hours, a lift capacity of 1'850 lbs, 72'' bucket, auxiliary hydraulics, full cab with heat and air conditioning, power attach, heated suspension seat, back up camera, hand controls, stereo, new tires.  It does smoke some when started cold but is in good working condition.   Product ID Number: CAT0232DJDPR00360

290B
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

505
2008 Bobcat S300
It has an 81 hp 4-cylinder turbo diesel 2-speed engine, a lift capacity of 3'000 lbs, and comes with a 78'' bucket, full cab with heat and air conditioning, hand and foot controls, power attach, auxiliary hydraulics, foam filled tires and has 4'773 hours.   The tracks on the pictures are selling seperately on lot 816.   Serial Number: A5GP20116

290C
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

706
2001 Freightliner Columbia 120 Truck, VIN # 1FUJA6CG91LJ97787
Year: 2001
Make: Freightliner
Model: Columbia 120
Mileage: 979'757
Trim Level: Day Cab
Drive Line: 6x4
Engine Type: L6, 12.7L (775 CID)
Fuel Type: Diesel
Horsepower: 500
Transmission: Manual
VIN #: 1FUJA6CG91LJ97787

Features and Notes: It has a Detroit Diesel Series 60 engine rated at 500 hp, dual 90 gallon fuel tanks, wet kit, runs and drives, tires are 10%-90%

506
2014 T870 Bobcat skid loader
Ser# AN8L12928, It is powered by a Kubota 100 hp engine (no def) with only 2950 hrs. 2-speed with 3650 lb lift capacity. 88 inch severe duty bucket with a new cutting edge, full cab with heat and ac, power attach, brand new tracks, selectable joysticks, stereo, and has the forestry package. This unit has been completely gone through by the dealer including a new drive motor, a new hydraulic stat, 4 new idler wheels, 2 new drive sprockets, new ac condenser, new fuel lines and sender, new hydraulic lines under motor, new belt tensioner pulley and belts. Contact Tim Graber 269-986-5693

290D
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

507
* Gehl 4625DX Skid Loader
It has a 4-cylinder Kubota diesel engine rated at 47 hp and a lift capacity of 1'300 lbs, it also has hand controls, auxiliary hydraulics, sells with a 60'' bucket, a 50'' bucket and a bale spear,   The engine has recently been rebuilt and the hours are unknown.   

290E
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

508
* Bobcat 863 Skid Loader
It has a 73 hp turbo diesel engine, 1'900 lb lift capacity, only 2'354 hours, auxiliary hydraulics, hand and foot controls, power attach, code start, decent tires, brackets for backhoe attachment, runs and operates as it should.   Serial Number 514448027

290F
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

509
* Mustang MTL16 Skid Loader
It has a brand new Yanmar 4-cylinder diesel engine,  a lift capacity of 1'620 lbs, only 2'993 hours, quick attach, auxiliary hydraulics, hand controls, suspension seat, new homemade cab with heat, newer tracks, new dump cylinder seals, new hydrostat seal, fresh tune and service.   Very tight machine that runs and operates as it should.    Product ID Number: 21301666

290G
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

510
* John Deere 320D Skidloader
Powered by a John Deere Power Tech engine, that puts out 68.2 HP. Lifting capacity of 2150 lbs. Engine model # is: 4024T. This is a 2 owner machine, that has always been well maintained, has airride seat, reversing fan, auto idle, hand and foot controls, power tach, standard aux. hydraulics, block heater, and auto level. It is an open cab. Tires are at 40%. Machine has just been serviced. One good running machine!

290H
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

511
* 2004 Takeuchi TL150 Skid Loader
It has a Yanmar 4-cylinder diesel engine that is rated at 97 horse power and iis 2-speed, lift capacity of 2'700 lbs, the hour meter was replaced at 4'200 hours and now shows 507 hours. It has hand controls, auxiliary hydraulics, quick attach, suspension seat, 66'' bucket.   It also just had a new left side drive motor, battery and starter replaced last year.  Serial Number: 21501269

290I
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

290J
Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall. One small one included.

512
2012 Bobcat S750 Skid Loader
It has a 3'200 lb lift capacity, 5'709 hours, is a 2-speed, auxiliary hydraulics, quick attach and plumbed for power attach, 68'' bucket, Kubota engine rated at 85 hp, full cab with heat and air conditioning.   Serial Number: ADTZ11658

540
JLG Man Lift
Wisconsin engine, engine did run but has sat for a few years, has electrical problem, includes hitch to tow on road Call Bronson with questions 574-210-3721

291
Stackable Plastic Crates (X2)
5' x 44"

541
2010 JLG 600S Man Lift
It has 4'431 hours, 4-wheel drive, 60' maximum platform height, 49' maximum reach, weighs 22'650 lbs, it is powered by a 50 hp 4-cylinder Duetz diesel engine, has dual controls,  has been very well maintained and is in excellent working condition. Serial Number: 0300138005

291A
Stackable Plastic Crates (X2)
5' x 44"

542
2009 Hinowa Light Lift 23.12
It has a maximum working height of 76', platform height of 70', maximum outreach is 37' and weighs in at 6'812 lbs.   It was just completely rewired, and has a new control box.   It is powered by a Honda iGX440 engine that does run a little rough when it is cold. The hours are unknown, tracks are in good condition.  Serial Number: 07323IN4G09  More pictures and video coming soon. 

291B
Stackable Plastic Crates (X3)
5' x 44"

543
Skyjack SJ8841 Scissor Lift
SN: 42218R. Max load is 1500 lbs. Max working height is 41'. Powered by a diesel engine.

291C
Stackable Plastic Crates (X3)
5' x 44"

544
Upright SL30 Scissor Lift
Model 064604-000. SN: 9861. Max load is 1300 lbs. Max platform height is 36'. Platform tilts in all 4 directions. All hydraulic cylinders have been rebuilt less than 2 yrs. ago. Powered by a Kubota gas engine.

291D
Stackable Plastic Crates (X2)
3' x 44" x 25"H

545
* 2008 Genie S-60 Boom Lift
S-60 Man Lift with only 3'903 hours and is powered by a 4-cylinder Perkins diesel engine, It has a maximum platform height of 60' and maximum horizontal reach of 50', it is 4-wheel drive, has dual controls, unladen weight of 20'827 lbs, 500lb working load limit and is excellent working condition.  Serial Number: S6008-18003

291E
Stackable Plastic Crates (X2)
3' x 44" x 25"H

546
* Genie Man Lift Cage
It is known to fit the Genie S-60 and S-40  will fit other models also. 

291F
Stackable Plastic Crates (X2)
3' x 44" x 25"H

547
* Genie Man Lift Cage
It is known to fit the Genie S-60 and S-40 will fit other models also.

291G
Stackable Plastic Crates (X1)
3' x 44" x 25"H

560
Upright XRT 33 Scissor Lift
It is powered by a 3-cylinder Kubota dual fuel engine that can run on either gas or LP.  It has a maximum height of 33', 1'000 lb load capacity, extendable platform, meter shows 2'072 hours but is not verified.   This unit is not currently in running condition, seller stated that it will need a new wire harness and possibly more.  

291H
Stackable Plastic Crates (X3)
41" x 44" x 27"H

561
* JLG 2646E2 Scissor Lift
It has a maximum platform height of 26', load capacity of 750 lbs, extendable platform, on board charger, fork pockets, 635 hours, everything is in working condition. 
SN: 0200063340

291I
Stackable Plastic Crates (X4)
41" x 44" x 27"H

562
* JLG 2646E2 Scissor Lift
It has a maximum platform height of 26', load capacity of 750 lbs, extendable platform, on board charger, fork pockets, hours are not believed to be correct, everything is in working condition.
SN: 0200108911

292
Lumber Carts (3)
Includes a 40" x 90", a 42" x 60", and a 44" x 30". The biggest one has casters.

293
Rolling Safety Ladder
10" high at the top step.

563
MEC 2033 Scissor Lift
It has a maximum height of 20', a lift capacity of 800 lbs, on board charger, fork pockets, extendable platform, built in 1995, hours are unknown.  Serial Number: 8600734

294
Tri Arc Ladder
Ladder to go over your conveyors.

564
Skyjack 4626 Scissor Lift
It has 1'805 hours, built in charger, extendable platform, fork pockets, 26' maximum height, 850 lb lift capacity, Serial Number: 70033

580
Toyota Forklift
Toyota Forklift model 8FGCU25.  It has 12'226 hours, 4'500 lb lift capacity, side shift, 5' forks, 3-stage mast, LP engine and is in good working condition. Serial Number: 27323
Call Bronson with questions 574-210-3721

295
Self Dumping Hopper
3 yd.

581
1999 Ford Sparky Forklift
It has a 2-stage mast with 70'' forks and a lift capacity of 8'000 lbs, it has 2 and 4-wheel drive and is center articulating, it is plumbed for the 3rd and 4th valves, it is powered by a 4-cylinder Perkins diesel engine, has new tires with approximately 20 hours, everything works as it should including headlights, flood loghts, beacon, and turn signals, hours are unknown, 
Serial Number: 990001
Call Bronson with questions 574-210-3721

295A
RPI Self Dumping Hopper
54" x 64"

582
Clark Stand On Forklift
Clark Narrow Isle Stand On Forklift, it has a 3'000 lb lift capacity, 2'184 hours, 2-stage mast, 42'' forks, 9' overall height, sells with charger, will need new batteries to be operational. Serial Number: NS246-0001 PM6675

295B
GalFab Self Dumping Hopper
36" x 60"

583
Toyota Forklift
2004 Toyota fork lift that has a 3-stage mast, 2'500 lb lift capacity, side shift, 42'' forks, only 3'336 hours, sells with tank, has newer tires, weighs 6'440 lbs. Model: 7FGCU15

295C
GalFab Self Dumping Hopper
35" x 52"

584
Hyster 155XL Forklift
1994 Hyster 155XL Forklift with a lift capacity of 14'400 lbs, it has 8'623 hours, 2-stage mast, side shift, 6' forks, 4-cylinder Perkins diesel engine, 2-speed hydrostatic transmission, weighs 19'100 lbs, fresh oil and filter and runs and operates as it should.   Serial Number: F006D02148R

296
Hercules Engine Hoist
`1-Ton capacity and in working condition. 

585
Big Joe Walk Behind Fork Lift
It has a 2'000 lb lift capacity, single stage mast, 10' lift height, 36'' forks, on board charger and is in good working condition.  Model: PDI 24-T10   Serial Number: 338778

586
Crown Walk Behind Fork Lift
It has a 2'000 lb lift capacity, 3 stage mast, 42" forks, on board charger and is 24 volt, in good working condition.   Serial Number: 33549

587
* CAT V150 Forklift
It has a lift capacity of 15'000 lbs, 2-stage mast, 12' forks, 18'000 hours, 2-speed transmission, powered by a 4-cylinder Perkins diesel engine, dual front tires, plumbed for 3rd valve, weight is approximately 20'800 lbs. Runs and operates as it should.  Serial Number: 13V02249

588
* Daewoo GP25-3 Fork Lift
It has a 4'500 lb lift capacity, 3-stage mast, LP powered, side shift, 8'513 hours, 48'' forks, pneumatic tires, good working condition. 2006 year model 

589
* CAT Forklift
Model: C5000. Max fork height is 80". Max lifting weight is 4600 lbs. LP powered. 4' forks. Hours unkown. No tank. Will need a new starter, key switch and key.

590
Linde H30T Fork Lift
It has a lift capacity of 6'000 lbs, has 15'138 hours, 3-stage mast side shift, fingertip controls, good tires, weighs 10'480 lbs,  LP tank is not included, It does throw an engine code intermittently. Code T483 in forward gear and T484 in reverse. most likely cause per the seller is a throttle position sensor.  Serial Number: H2X393S05216

802
New Skid Steer Snow Plow Attachment
86" wide, 

600
2013 Volvo L50G Wheel Loader
Serial # 11508328, PIN VCEL50GSC02420257, front end quick attach, heat and A/C, heated seats, has 3rd valve, meter reads 13,438 hours, ONLY 2500 HOURS ON NEW ENGINE, does not include any attachments, has wiring issues

803
New Skid Steer Snow Plow Attachment
86" wide, 

601
2008 Volvo L90F Wheel Loader
It has a D6E LAE3 6-cylinder turbocharged diesel engine rated at 172 net horse power backed by a 4-speed forward and reverse transmission that is capable of 28 mph.  It comes with 16' forks, has always been used on asphalt, 16'871 hours showing on meter, full cab with heat and air conditioning, suspension seat and much more.  Very clean machine inside and out and has just had a full service with all new fluids and filters.   Product ID Number: VCE0L90FT00068488

610
2015 Caterpillar D5K2 LGP Dozer
It has a CAT C4.4 ACERT diesel engine, rated at 104 hp, only 2'194 hours, 10'6'' 6-way blade, undercarriage is rated at 75%, tracks are 26'' wide, 7'033 psi ground pressure, It has a full cab with heat and air conditioning, hand controls, suspension seat and more, operating weight of 21'000 lbs, just serviced and is in good working condition.  Serial Number: CAT00D5KHY200469

804
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate

611
Ashland XL2 Scraper Pan
It has a 87.5" cutting width, 9.5 cubic yard heaped capacity, 55'' apron clearance, 8'' cutting depth, 13.5'' ground clearance at the blade, requires 140-300 hp and is in excellent working condition.  Serial Number: 24151  Model Number: I-950

805
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate

620
2008 Mclaughlin Vermeer VT800 Hydro Vac Excavator
3,076 Hours on Meter --800 Gallon
Hydraulic Dump and Door latch
Hydraulic Boom Extension and Lift with wireless Remote
Kubota Diesel Model 3300
350 Gallon Fresh Water Tank with Water Pump set up for Hydro-Excavating and Wash-Down
Tandem Axel -24,000 lbs GVWR
Water Heater
Light Board Tower
Blower with Reverse Flow
4" Suction Hoses, wash wand included
hydraulic arm, remote control, electric brakes, pintle hitch, 
Sells with title  VIN: 1M9FE17258S284473
Serial Number: 8DHDRFB020408976
Call Bronson with questions 574-210-3721

806
New Rotary Skid Steer Broom
72'' wide, New condition, in crate, pictures coming soon. 

807
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate

621
2016 Volvo ECR58D MIni Excavator
It has a 49hp 4-cylinderD2,6H diesel engine, only 649 hours, has an operating weight of 12'875 lbs, 15 1/2'' wide rubber tracks, 20'4'' reach across the ground, 12.93' maximum digging depth, 2-speed, 78'' backfill blade, 24'' 5-tooth bucket, also included are 18'' and 12'' 3-tooth buckets, hydraulic thumb, hydraulic quick attach coupler, full cab with suspension seat, radio, heat and air conditioning It is a very well taken care of low hour machine that works and operates perfectly, Serial Number: VCE00C58C00210344

808
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate

630
Rayco RG90 Stump Grinder
2007 model Rayco RG90 that has a 4-cylinder 87 hp Duetz Diesel engine, has 4-wheel drive, shows 2'819 hours but can not be verified. Backfill blade, it is in good working condition but does have a hydraulic leak.   Serial Number RG900 044 0907

809
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. 

631
Dura Tech TC-15 Chipper
In excellent operating condition, It is powered by a CAT C4.4 129 hp diesel engine and only has 1'213 hours. It has up to 15'' chip capacity, 360 degree discharge, 2 chutes included, gathering winch, 48''chipping disc, pintle style hitch, automated infeed system, dual control panels, heavy axles and jack, new battery.    Serial Number: 15-2-17-0020

810
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate,

632
LeeBoy 400 Vibratory Roller
It is not in working condition and the hours are unknown, It has a Lombardini 3 cylinder diesel engine, forward and reverse, 40'' front and 44'' rear rollers, sprayer on front.  Serial Number: 416  
 

811
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate,

633
John Deere 440C Cable Skidder*
Meter reads 937 hours
6' 2 way blade
John Deere diesel engine new installed in 2020 and also has a new radiator and clutch. 
Winch works great.
Rear tires are forester tires and are at 50% and fronts have slightly more use and there is a spare tire that comes with the skidder.      Has small leak in hydraulic line.
Tim Graber 269-986-5693 

812
New Tree Shear
PIctures coming soon,

650
1010 Massey Ferguson Tractor
Meter reads 1148 hrs. Powered by a diesel engine, is hydro drive, has 3 point hitch, PTO, ROPS, and high/ low range. 
SN: 13195

813
New Tree Shear
PIctures coming soon,

651
Case International 7110 Tractor
Manufactured in 1991. Meter reads 7058 hrs. Has 450 & 1000 PTOs, 3 point hitch, rear electrical and rear hydraulic hookups. It is powered by a  8.3L, 6-cyl, 144 HP Cummins diesel engine. 18-speed full power shift. Starts easy, and is a good running tractor. Also has heater block, and 2 front suitcase weights. Has very good rubber as well. Several very minor things to be fixed, otherwise a good running machine. 1 owner! Retiring farmer is selling out.
SN: JJA0032709

814
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, 

652
Allis Chalmers WD Tractor
1950 Allis that is powered by a 3.3L 4-cyl gasoline, 28 HP, good running engine that runs on leaded gas. Also has a 4 speed transmission, good rubber, radiator leak, and includes the drawbar. Narrow front. 6V ignition. Owners manual included as well.
SN:WD46880

815
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, 

653
* 1940 9N Tractor
Powered by a 2.0L 4-cyl gasoline, 22 HP engine. Has a 12V ignition, 3 speed transmission, PTO, and 3 point. Motor runs great, but needs a new exhaust. Brakes a little weak as well.
SN: 9N206395

654
* 2008 McCormick LT47HST Tractor
It has a 47 hp diesel engine, 3-speed hydrostatic transmission, 3-point hitch, draw bar, 540 PTO, rear hydraulics, mount for Woods backhoe, 72" 4 in 1 loader bucket, quick attach compatible with many loader implements, 4-wheel drive, only 1'693 hours and is a one owner machine. 

655
* 1971 Allis Chalmers One-Eighty Tractor
Powered by a 4.9L 6-cyl, 71 HP diesel engine. Rear aux. hydraulics, and 3 point. 8 speed transmission. 12V battery system. New top-end seals, radiator, head gasket, and transmission shifting fork, a year ago.
SN on motor: 2D-36004
SN on tractor: 9360 D

656
* International 184 Lo Boy Compact Utility Tractor
It has a 18 hp 1.0 liter 4-cylinder gas engine, 3-speed transmission with reverse, 60'' mowing deck with newer blades, PTO, 3-point hitch,  hours are unknown and everything works as it should.  Serial Number: 2000116U052302

657
* Lot of Tractor Tires
2 new tires. Titan 14.9-24.

658
1963 J.I. Case 831 Tractor
It has a 73 hp 4.9 liter 4-cylinder diesel engine, dual range transmission,  PTO, 3-point hitch, draw bar, rear hydraulics, does need tires, has new brakes, new seat and fresh oil. Serial Number: 8201695

699
* 1994 Fleetwood Bounder Motorhome
It has 73'046 miles and is powered by a Chevy 454 gas engine and an automatic transmission, it has lots of storage, sofa and dinette that can be converted to beds, rear bedroom, newer generator, awning, full kitchen and bathroom, the roof and windows are starting to leak, the stairs do not operate and it needs new batteries.   VIN: 1GBKP37N8R3325678

700
2013 Peterbilt 220 Truck, VIN # 3BPPHM7X0DF590080
Year: 2013
Make: Peterbilt
Model: 220
Mileage:63'233
Drive Line: 4x2
Engine Type: L6, 6.7L
Fuel Type: Diesel
Transmission:Automatic 
VIN #: 3BPPHM7X0DF590080

Features and Notes:  It has a Paccar PX-6 diesel engine with a 2500HS automatic transmission, 33'000 GVWR, new batteries, air brakes and seat, 24' x 8' box that is in great condition with a Maxon lift gate rated at 4'400 lbs, back up camera and more, 12'1'' total height, runs and drives excellent.  
Call Bronson with questions 574-210-3721

701
Mack Dump Truck
With a 6-cylinder diesel engine, manual transmission, tandem rear axles, it shows 26'907 miles and 8'617 hours on engine that are believed to be incorrect, dump box has 14/16 YD capacity and is model number C14T Serial Number: 394D5213 built in 06/94. Truck is not in running condition. Call Bronson with questions 574-210-3721

702
1994 Dodge Ram Pickup Pickup Truck, VIN # 1B6MC36C7RS731395
Year: 1994
Make: Dodge
Model: Ram Pickup
Mileage: 106'063
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: RWD
Engine Type: L6, 5.9L; Turbo
Fuel Type: Diesel
Transmission: Automatic 
VIN #: 1B6MC36C7RS731395

Features and Notes: It has a Cummins 5.9 liter diesel engine with an automatic transmission. 8' x 9' dump bed 36'' tool box, new starter, fresh tune and service, everything works as it should, starts hard believed to have air in fuel line per seller, ABS light is on. Call Bronson with questions 574-210-3721

703
2004 Ford F-450 Pickup Truck, VIN # 1FDXF47P04ED48568
Year: 2004
Make: Ford
Model: F-450
Mileage: 145'239
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 6.0L (366 CID)
Fuel Type: Diesel
Horsepower: 325HP
Transmission: Automatic 
VIN #: 1FDXF47P04ED48568

Features and Notes:  F-450 Super Duty, with a 6.0 liter diesel engine, automatic transmission, floor shift 4-wheel drive, newer rear tires, 8'x9' dump bed, 8' wide Western Ultramount plow with wings, CB radio, bench seat, heat does not work, Starts and runs.   Call Bronson with questions 574-210-3721

704
2015 Hydrema 922HM Articulated Dump Truck
It has a 6-cylinder Cummins QSB diesel engine rated at 274 hp and is backed by a ZF Ergopower 6 WG 210 6-speed forward and 3-speed reverse transmission, is all wheel drive and has 4'561 hours.  It has a 22 ton loaded capacity or 15.7 cubic yards. The cab has heat and air conditioning, back up camera, fully adjustable suspension seat, stereo and more.  It is in very good working condition and runs and operates as it should.   Serial Number: 11525

705
1993 International F-4900 Boom Truck, VIN # 1HTSHN2R2PH457336
Year: 1993
Make: International
Model: F-4900
Mileage: meter reads 93,324
Drive Line: 6x4
Engine Type: L6, 7.6L (466 CID)  Navistar
Fuel Type: Diesel
Transmission: 8 speed manual Eaton Fuller
VIN #: 1HTSHN2R2PH457336

Features and Notes:
    Boom truck with GVWR of 52,000 lbs., has Williams exhaust brake, and also a JLG Model 1400BT hydraulic crane. Nice and clean interior. Starts easy in cold weather. Good running truck. SN on crane is: 0400002341.Crane has swing-out extendable boom, and winch works great as well. 

706
2001 Freightliner Columbia 120 Truck, VIN # 1FUJA6CG91LJ97787
Year: 2001
Make: Freightliner
Model: Columbia 120
Vehicle Type: Truck
Mileage: 979'757
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 12.7L (775 CID)
Fuel Type: Diesel
Horsepower: 500
Transmission: Manual 
VIN #: 1FUJA6CG91LJ97787

Features and Notes: It has a Detroit Diesel Series 60 engine rated at 500 hp,dual 90 gallon fuel tanks, wet kit, runs and drives, tires are 10%-90%

707
1973 International Transtar 4200 Dump Truck
It has a V-8 71 Detroit Diesel with a 10-speed manual transmission, It shows 69'751 miles but is not believed to be accurate, It comes with dual fuel tanks, air brakes, spring suspension, tandem rear axles, 8' x 15' dump box that has a 3-way gate, GVWR 44'860 lbs, 162'' wheel base, it has a new starter, leaks engine and hydraulic oil and 3rd gear is not working,  Model; F4270  Serial Number: 42747CGA25967

708
1994 Freightliner FLD112 Truck, VIN # 1FUY3MDB3RH424728
Year: 1994
Make: Freightliner
Model: FLD112
Mileage: 367-387
Body Type: Highway
Drive Line: 6x4
Engine Type: L6, 10.8L (661 CID)
Fuel Type: Diesel
Horsepower: 336-407HP
Transmission: 10-Speed Manual 
VIN #: 1FUY3MDB3RH424728

Features and Notes:  It has a N11 370 hp engine, 10-speed Rockwell transmission, good tires, works and runs as it should  GVWR: 52'000 lbs 

709
* 2001 Ford F-550 Truck, VIN # 1FDAF57F71EB26074
Year: 2001
Make: Ford
Model: F-550
Vehicle Type: Truck
Mileage: 182'250
Plate:
Body Type: Regular Cab
Trim Level:
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1FDAF57F71EB26074

Features and Notes: It has a 7.3 Powerstroke V-8 Diesel engine with an automatic transmission and floor shift 4-wheel drive, Reading service body, auxiliary fuel tank, plow mount, trailer brake control, new turbo and exhaust manifold last fall, tires at 25% works and runs as it should. 

710
* 1972 Chevy C30 Dump Truck
Powered by a 350 cubic inch V-8 gas engine and backed by a manual 4-speed transmission, the meter reads 81'680 but is assumed to have rolled over at least once, the dump bed is 6' wide x 8' long and does work, it has dual tires in the rear, all tires are weather checks, truck was driven to the auction.  VIN: CCE332J140433

711
* 2003 Ford F-450 Pickup Truck, VIN # 1FDXW46P03EB91561
Year: 2003
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage: 238'442
Plate:
Body Type: 4 Door Cab; Crew; Chassis
Trim Level: Base
Drive Line: 4x2; Dual Rear Wheels
Engine Type: V8, 6.0L (366 CID)
Fuel Type: Diesel
Horsepower: 325HP
Transmission: Manual 
VIN #: 1FDXW46P03EB91561

Features and Notes:  6.0 liter turbo charged Power Stroke V-8 diesel engine with a manual ZF6 transmission, 2 wheel drive dually, new tires all the way around last fall, crew cab, service body, power front seats, trailer brake controller, EGR deleted, new injection pump, just recently had a full tune and service.  

712
* 2000 Ford F-550 Truck, VIN # 1FDAW57F1YEA21072
Year: 2000
Make: Ford
Model: F-550
Vehicle Type: Truck
Mileage: 225'559
Plate:
Body Type: Crew Cab
Trim Level:
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Horsepower: 
Transmission: Automatic 
VIN #: 1FDAW57F1YEA21072

Features and Notes: The engine was replaced with a used one and now has approximately 120'000 miles on it.   It also now has floor shift 4-wheel drive, King Ranch full power leather interior, crew cab, aluminum wheels, newer rear tires, aluminum flat bed with headache rack, gooseneck hitch, runs and drives. 

713
* 2001 Ford F-250 Pickup Truck, VIN # 1FTNX21L41EB74650
Year: 2001
Make: Ford
Model: F-250
Vehicle Type: Pickup Truck
Mileage: 191'416
Plate:
Body Type: 4 Door Cab; Super Cab
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 5.4L (330 CID); SOHC 16V; EFI
Fuel Type: Gasoline
Horsepower: 235-260HP
Transmission: Automatic 
VIN #: 1FTNX21L41EB74650

Features and Notes:  It has a 5.4 liter Triton V-8 gas engine, automatic transmission, floor shift 4-wheel drive, Reading service body, extended cab, new battery, runs and drives as it should.  

714
* 2000 GMC Sierra Pickup Truck, VIN # 1GTHK33R2YF508679
Year: 2000
Make: GMC
Model: Sierra
Vehicle Type: Pickup Truck
Mileage: 183'896
Plate:
Body Type: 4 Door Cab; Crew
Trim Level: SL; SLE; SLT
Drive Line: 4WD
Engine Type: V8, 5.7L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GTHK33R2YF508679

Features and Notes: It has a 5.7 liter V-8 gas engine with an automatic transmission and floor shift 4-wheel drive, It is a crew cab that seats 6 and has a long bed with a contractors cap and a ladder rack.  It does have scattered dents, scratches and rust, broken drivers side mirror and the inside drivers door handle doesn't work, the rear door of the cap is also broke.  It is a one owner truck since new.  

715
* 1985 Ford LT9000 Truck, VIN # 1FDYU90J3FVA25373
Year: 1985
Make: Ford
Model: LT9000
Vehicle Type: Truck
Mileage: 422'899
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 7.0L (426 CID)
Fuel Type: Diesel
Horsepower: 185-275HP
Transmission: 13-speed Manual
VIN #: 1FDYU90J3FVA25373

Features and Notes:  It has a 6-cylinder Detroit Diesel engine with a 13-speed manual transmission, tri-axle, tires are 25-75%, has good brakes, pintle hitch, 15' long dump box, new air compressor, air dryer, and lines, new rear suspension pins and bushings.  runs and drives as it should. 

716
* 2006 Ford F-350 Pickup Truck, VIN # 1FTWW33P16ED03724
Year: 2006
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage: 339'033
Plate:
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: 4WD; Dual Rear Wheels
Engine Type: V8, 6.0L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1FTWW33P16ED03724

Features and Notes: It is a 4-door crew cab with a full power interior with heated leather seats, Lariat package, 4-wheel drive, trailer brake controller, 8-bed, gooseneck hitch, the bed is loose, it has newer tires, check engine light is on and the windshield is cracked.   

717
* 2006 GMC C5500 Truck, VIN # 1GDE5C3256F424216
Year: 2006
Make: GMC
Model: C5500
Vehicle Type: Truck
Mileage: 169'201
Plate:
Body Type: Conventional Cab & Chassis
Trim Level:
Drive Line: 4x4
Engine Type: V8, 6.6L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1GDE5C3256F424216

Features and Notes: It has a 6.6 liter Duramax diesel engine with an automatic Allison transmission with 4-wheel drive, the bed is 8' wide x 14' long, has trailer brake control, new battery,  2 new rear dual tires, the other tires are 25%, parking brake is not working, air seat is not working.  The truck runs and drives good. 

718
1997 Ford AT9513 Aeromax 113 Truck, VIN # 1FTYY96B9VVA27362
Year: 1997
Make: Ford
Model: AT9513 Aeromax 113
Vehicle Type: Truck
Mileage: 999'022
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 11.1L (677 CID); Turbo
Fuel Type: Diesel
Horsepower: 300-365HP
Transmission: Manual 
VIN #: 1FTYY96B9VVA27362

Features and Notes: It has a Detroit Diesel Series 60 engine with a 10-Speed manual transmission, 52'000 GVWR, 7/8 rear duals are new re cap, runs and drives, will need new batteries. 

750
Tri Axle Utility Trailer
It is 6'6'' wide and 20' long, has a steel mesh floor and rear gate, has brakes, spring suspension and pulls with a pintle style hitch. Does not have a VIN and sells with a bill of sale only. One tire is flat. Call Bronson with questions 574-210-3721

751
Equipment Trailer
It has an 8' wide x 15' deck with a 5' dovetail and 5' folding ramps,  tandem 8-lug axles, pintle style hitch, in good condition does need new tires.   VIN: SN6031580 Call Bronson with questions 574-210-3721

752
Equipment Trailer
18', has ramps Call Bronson with questions 574-210-3721

754
Cargo Trailer
It has a single 5-lug axle, pulls with a 2'' ball, swinging rear doors, curb side man door, shleving, tie down anchors, E-track and wall outlet, VIN: 4X4TSET17YN022515   Model CM614SA

755
Gooseneck Equipment Trailer
1999 Trailerman Gooseneck Flatbed, It has a 8' X 20' deck, 4' dove tail and 6' drive on ramps.  It has new wheels, new axles, new decking, new bearings, new ramps, new lights, and new brakes.   All new except for the frame. VIN: 1H9EY2424Xl6207580

756
1972 Gooseneck Livestock Trailer
It is 7' wide x 20' long plus the gooseneck, It has new lights, new wheels and has been recently serviced, cut gate in the middle, good frame and wood floor, new LED lights, new bearings and seals, new wheels and tires, brakes on all 4 wheels, rear axle has new Dexter brakes,  VIN: GN20010572

757
2020 Gatormade Tandem Axle Gooseneck Trailer
It has less than 5'000 miles of use and is in like new condition.  The deck is 8' wide x 20' long with extra wide 5' folding ramps. It has 8'000 lb rated axles, GVWR 16'000 lbs, chain box, stake pockets on rub rails, LED lights, dual jacks and much more.   VIN: 4Z1GF2523LS001622

758
2007 Dump Trailer
7' x 12' with ramps and spare tire. In good working condition. Good title.
VIN: 5LEBC162071005450

759
Interstate 20DT Deckover Equipment Trailer
102" x 20' with 5' dovetail, and 30' overall length. Has GVWR of 25,900, pintle hitch, and fold down ramps. Good title.
VIN: 1JK0DT212RA100137

760
2019 Load Trail Equipment Trailer
86" x 22' with 5' fold down ramps, and 7000 lb. axles. Has removable racks on the side. Good title.
VIN: 4ZECH2229K1176957

761
2019 PJ Equipment Trailer
84" x 20' with 3 stabilizer jacks and spare tire. GVWR of 9899 lbs. INCLUDES BRAND NEW RAMPS. Good title.
VIN: 4P5CE2028L3041819

762
2022 Single Axle Utility Trailer
80"x 12' with fold down ramp. Brand new. Good title.
VIN: 1P9P1U212NB817089

763
1990 Dorsey Walking Floor Trailer
It is 45' long and has a GVWR of 66'290 lbs, the inside width is 90 1/2'', has good tires with 2 being new, the tarp is in good condition and the walking floor works good. VIN: 1DTV75W20LA196633

764
1992 Boss Livestock Trailer
Model 8020 GN. Has (2) 7000 lbs. axles. Light hook-up cord needs new end. Has title.
VIN: 463782027N1001745

765
Bison Livestock Trailer
Trailer is 16' long, has title, and spare tire.
VIN 43B261627L1002159

766
Trailer Frame
102" x 19' w/6' dovetail, and 6' ramps. Fifth wheel hook-up, no floor, and no title. Sells with bill of sale only.

767
1991 45' Walking Floor Chip Trailer
CPS in good working condition.   VIN: 1C9535620MP389278

768
1995 Great Dane Van Trailer
102" x 48'. 109" inside height. GVWR of 65,000 lbs. Banner on side will be removed by auction day. Trailer can be pulled, but is not road worthy. Sells with bill of sale only.
VIN: 1GRAA9623SB039340

769
1995 Great Dane Van Trailer
102 " x 53'. 109" inside height. Has hole in roof. GVWR of 65,000 lbs. Trailer is not road worthy. Sells with bill of sale only. Contents inside trailer will be removed by sale day.
VIN: 1GRAA0523S3035204

770
Fruehauf Van Trailer
102" x 53'. 112" inside height. Landing gear needs attention. Trailer is not road worthy. Sells with bill of sale only. Contents inside trailer will be removed by sale day.
VIN: 1HZV05323JB004508

771
Wildwood 28' 5th Wheel Camper
Everything is in working order, It has a new Air Conditioner unit, new refrigerator (AC), new awning, roof has been rebuilt and replaced with aluminum checker plate, extra insulation in walls and roof,  extra sturdy ladder and good tires,  the inside is clean, has been winterized and is ready to use.  

772
Harris Float Boat Pontoon
24' toons. 20' deck, 16' with railing, and 4' porch on front. Has 36V lights for bowfishing on toons, and also 36V trolling motor. Everything works good. No trailer, and no title.

773
* NEW 2022 PJ 7' X 14' Dump Trailer
Brand new PJ dump trailer.  It comes with a tarp, spare tire, combo rear gate, ramps, led lights, heavy duty jack, pulls with 2 5/16'' ball, has brakes and leaf spring suspension, tandem 8-lug axles, 14'000 lb GVWR.   VIN: 4P51D1924N3062239

774
* 2005 Transcraft 48' Conestoga Trailer
Transcraft 48101 conestaga trailer, it has Alcoa aluminum wheels, tires are 25-75%, it does have a few patches in the tarp, in good useable condition.  VIN: 1TTF4820952014361

775
* 2002 TCF 48' Drop Deck Trailer
It has an aluminum deck, 37' with 10' top, includes 8' steel ramps, has aluminum wheels, tires 50-75% tread, does have a crack in frame above front axle.  VIN: 1TTE4820821068067

776
* 1981 Log Trailer
It is not in road worthy condition but does sell with a title. 

777
* Dump Wagon
92" x 118", has new 48" sides, hydraulic powered dump, wooden floor, lift cylinder needs replaced

778
* 1970 Gooseneck Horse Trailer
It has a 15' long horse area, cut gate in the middle, 7' tack room, good frame and wood floor, new wiring, LED interior and exterior lighting, new tires and wheels, 3 of the 4 brakes work, wheel bearings repacked and has new grease seals.  VIN: MVIN219570IND

779
* Smooth Bore Tanker Trailer
Originally built in 1967 and rebuilt in 2007 with new cradle and bands, 6'250 gallon capacity with 3'' outlet, it is all stainless and insulated, Sells with bill of sale only.  

780
* 1996 Runabout Speed Boat
It has sat for approximately 2 years and was not properly winterized, it has a new starter and hydraulic pump, good out drive, sells with trailer.   

781
* 1989 Ponderosa Utility Trailer
70" x 18' w/ 4' ramps on back, and a 67" x 6' ramp in the front right corner. Has 21" sides.
VIN: 1994

782
* 1979 Runabout Speed Boat
It has a 85 hp Johnson outboard engine, has sat for a few years, does turn over, sells with trailer.  Hull ID Number: CHK12855M78G

783
* 2022 US Cargo V-Nose Trailer
Brand new 2022 5' x 8' V-nose trailer, it pulls with a 2'' ball, has LED lights, 24'' curb side man door with flush lock and handle, double rear doors, 3/4'' flooring, sells with a new certificate of orgin.  

784
* 45' Great Dane Storage Trailer
It is not road worthy, does not have a title, rear door does not open and close properly, does keep things dry.   Sells with bill of sale only. 

785
* Car Dolly
Does not have a title and sells with bill of sale only. 

786
* 8 1/2' x 20' Trailer
It is a tandem axle and has a heavy duty jack and pulls with a pintle style hitch, It needs at least one new tire, decking and lights.  Does not have a title and sells with a bill of sale only. 

787
* 1998 Midmark S18 Trailer
It is 18' long x 82'' wide, tandem axle, has ramps, tool box, stake pockets, pulls with 2'' ball, axle is bend and will need replaced, VIN: 4ASFS1824WS002283

788
* 2002 Fleetneck Tag Trailer
92" x 23' w/ 5' beaver tail and 5' fold down ramps. Pintle style hitch. Steel deck. Tires, jack, and safety hooks, were all new last spring. Brakes at 30%. Needs fresh shocks. Sells with bill of sale only.

789
* 1995 Sea-Doo Speedster Jet Boat
It is powered by twin Rotax inboard engines that are 650cc each and makes 80 hp, IIt can be used to pull skier or tube, it is in running condition but the left engine doesn't push as hard as the right. It has not been winterized but has been stored in a heated building.   Boat and trailer sell with together with title. HID Number: ZZNH3335E595

790
* 12' Aluminum Fishing Boat with Trailer and Motor
12' long fishing boat that has a 4.5 hp Evinrude 2-stroke outboard engine that is in working condition, trailer pulls with a 1 7/8'' ball.   Sells with Michigan registration 

791
1995 Dorsey 48' Flatbed Trailer
It is 8' wide x 48' long, has a headache rack included, 48'' tool box, pulled to the auction, rear lights may need attention, tires 25-45%.  VIN: 1DTP0Z24SP036738

792
1985 Log Trailer
It is 34' long, has aluminum wheels, spring ride suspension, lights do work, the brakes are wore out. 

793
2007 Cargo Mate 7' x 12' Enclosed Trailer
It is 7' wide x 12' long x 7' high and has a V-nose, tandem 5-lug axles, double rear doors, curb side man door, has brakes, pulls with a 2 5/16'' ball, VIN: 5NHUEH2277N058679

794
* 14' V-Bottom Boat
Fiberglass boat that sells with trailer. Has 2 seats, but no motor and no leaks. Sells with bill of sale only.

795
New 2022 Load Trial 7' x 14' Dump Trailer DT14
It has tandem 7'000 lb Dexter axles, 10g Ga. smooth plate flooring, 8'' I-Beam frame, 2-way spreader rear gate, 14'000 lb GVWR, LED lighting, 7'slide in ramps, roll up tarp, side step, heavy duty jack, pulls with 2 5/16'' ball, spare tire mount, built in charger for 12v battery.  VIN: 4ZEDT1429N2261869

796
New 2022Look 7' x 16' Cargo Trailer
It has a ramp rear door with extension, 32'' curb side man door with lock, 24'' v-nose, 84'' interior height, screw less exterior aluminum, tandem 3'500 lb torsion axles, 4'400 lb loading capacity, 8'000 lb drop leg jack, all LED lighting, 6'' tube frame, pulls with 2 5/16'' ball.  VIN: 53BLTEA27NA073080

797
2005 United Enclosed Trailer
6' wide x 12' Long and has a single 5-lug axle, swinging double rear doors, curb side man door, pulls with a 2'' ball, marker lights on fenders need replaced.  VIN: 48BTE12155A076167

798
Gooseneck Trailer
It has a 8' wide x 20' long deck that has just been replaced with new white oak, (2) 48'' tool boxes, tandem axles with dual tires, new coupler, new trailer light plug, lights work.  

799
2014 Sure-Trac Gooseneck Trailer
The deck is 8' wide x 20' long with a 5' dove tail and fold up ramps.  It has tandem axles with dual tires on each and they are rated at 10'000 lbs each, 1 is new, has good tires and brakes.   VIN: 5JW3U2520E1096294

799A
2019 Stealth Titan Enclosed Trailer
It has only been pulled approximately 4'000 miles since new, it is 16' long and has a V-nose, tandem axles rated at 3'500 lbs each, LED lights, curb side man door, ramp rear door, pulls with a 2 5/16'' ball, painted interior and floor.   VIN: 52LBE1428KE075444

799B
2022 7' x 16' Enclosed RC Trailer
It has tandem 3'500 lb axles, LED lights, ramp rear door, curb side man door, pulls with 2 5/16'' ball and has a V-nose with built in shelving,  VIN: 56VBE1629NM667414

 

799C
2015 PJ Gooseneck Equipment Trailer
It has dual tandem axles rated at 10'000 lbs each, the deck is 8' wide x 20' long with a 5' dove tail and lay flat ramps, electric over hydraulic brakes,  VIN: 4P5LD2524F3012947

799D
1995 Double Decker Trailer
Double Decker trailer originally used to haul pop up campers and cars, it has 3 heavy duty winches, top ramp is also winch operated, drive on ramps, ball stands, straps, spare tire and more.   VIN: 1UJFJ02R7S1910096

799E
1999 Double Decker Trailer
It has a heavy duty winch, tool boxes, tire chains, ball stands, top deck has hydraulic tilt, drive on ramps, new straps, spare tires, was used to haul pop up campers and cars.  VIN: 1UJFJ02R0X1910117

800
3-Point Hitch Attachment
Call Bronson with questions 574-210-3721

801
Skid Loader Forks
Farm Tuff Skider loader forks.  Forks are 48'' long.  

816
Growzer Style Skid Loader Tracks
Tracks are 15'' wide and were lasted mounted to a Bobcat S300 with tire size 12-16.5.   These will possibly fit other machines as well.  

817
Skid Loader Forks
Forks are 44'' long and have adjustable width and are in good condition. 

818
78" Bucket With Single Blade
Brand new skidloader bucket.

819
WD Disk
8.5' wide double disk. Fits WD tractor, lot # 652 in this auction. In decent shape.

820
WD -53 3 Bottom Plow
Fits WD tractor, lot # 652 in this auction.

821
6' Back Blade
Fits WD tractor, lot # 652 in this auction.

822
60" Brush Mower
Pull behind mower. Mower is loose.

823
JTC Skid Loader Auger Attachment
It is in like new condition and sells with 18'' and 12'' bits. 

824
3-Point York Rake Attachment

825
Single Bottom Plow

826
* Loader Bucket 72''

827
* 3-Point Box Blade
It is 6' wide and has 6 ripper shanks 

828
* Bobcat 811 Backhoe Attachment
It is in good working condition, has hydraulic outriggers, dig depth of approximately 12', sells with a 12'' 3-tooth bucket, 24'' 5-tooth bucket and a 36'' 7-tooth bucket.  

829
* Spike Tooth Dirt Drag
It is approximately 14' wide and pulls with a draw bar style hitch and has adjustable height. 

830
* New 84" Skid Steer Rock and Brush Grapple

831
* New 84" Skid Steer Rock and Brush Grapple

832
* New 84" Skid Steer Rock and Brush Grapple

833
* New 78" Skid Steer Rock and Brush Grapple

834
* New 78" Skid Steer Rock and Brush Grapple

835
* New 78" Skid Steer Rock and Brush Grapple

836
* New 74" Skid Steer Rock and Brush Grapple

837
* New 74" Skid Steer Rock and Brush Grapple

838
* New 74" Skid Steer Rock and Brush Grapple

839
* New 68" Skid Steer Rock and Brush Grapple

840
* New 80'' Skid Steer Root Grapple

841
* New 70'' Skid Steer Root Grapple

842
* New 60'' Skid Steer Root Grapple

842A
* New 60'' Skid Steer Root Grapple

843
New Receiver Hitch Skid Steer Trailer Mover

844
* New Receiver Hitch Skid Steer Trailer Mover

845
* New Receiver Hitch Skid Steer Trailer Mover

846
* New Receiver Hitch Skid Steer Trailer Mover

847
* New Receiver Hitch Skid Steer Trailer Mover Closed Center

848
* New Weldable Quick Attach Plate Closed Center

849
* New Receiver Hitch Skid Steer Trailer Mover Closed Center

850
* New Receiver Hitch Skid Steer Trailer Mover Closed Center

851
* New Weldable Quick Attach Plate

852
* New Weldable Quick Attach Plate

853
* New Weldable Quick Attach Plate

854
* New Weldable Quick Attach Plate

855
* New Weldable Quick Attach Plate

856
* New Weldable Quick Attach Plate

857
* New Weldable Quick Attach Plate

858
* New Weldable Quick Attach Plate

859
* New Weldable Quick Attach Plate Closed Center

860
* New Weldable Quick Attach Plate Closed Center

861
* New Weldable Quick Attach Plate Closed Center

862
* New Weldable Quick Attach Plate Closed Center

863
* New Weldable Quick Attach Plate Closed Center

864
* New Weldable Quick Attach Plate Closed Center

865
* New Weldable Quick Attach Plate Closed Center

866
* New Weldable Quick Attach Plate Closed Center

867
* New Pallet Fork Extensions Light Duty 68''

868
* New Pallet Fork Extensions Light Duty 68''

869
* New Pallet Fork Extensions Light Duty 84''

870
* New Pallet Fork Extensions Light Duty 84''

871
* New Skid Steer Brush Mower 80''

872
* Land Pride 3 pt. Back Blade
60" wide.

873
* Big Arm Skid Loader Backhoe Attachment
Comes with a 12" HLA bucket, and boom swing switch. 57" arm. Good working condition.

874
* 20" HLA Backhoe Bucket
Slightly used. Fits on lot # 873.

875
* 12" HLA Backhoe Bucket
Brand new. Fits on lot # 873.

876
* 78" Skid Loader Bucket
Brand new. High profile. Heavy duty built.

877
* Skid Loader Forks
Brand new. Extra heavy duty built. Quick attach hookup, but built similar to telehandler forks. Easy adjust. 4' forks. Loggers and contractors really like how these hold up.

878
* Skid Steer Attach Frame
Brand new.

879
* Skid Steer Attach Frame
Brand new.

880
* Skid Steer Attach Frame
Brand new.

881
* Skid Steer Attach Frame
Brand new.

882
* Skid Steer Attach Frame
Brand new.

883
* Skid Steer Attach Frame
Brand new.

884
* Skid Steer Attach Frame
Brand new.

885
* Skid Steer Attach Frame
Brand new.

886
* 2 Bottom Plow
3 point hitch type.

887
* 3 Point Hitch

888
* 3 Point Hitch

889
* 67" Skid Loader Bucket
Has big loop.

890
* 60" Skid Loader Bucket
Has pin hole for pulling implements.

891
* 67" Skid Loader Bucket
Has teeth on front.

892
* 3 Pt. King Kutter Brush Mower
PTO driven. 5' wide.

893
New Skid Steer 76''Single Cylinder Grapple Bucket

894
New Skid Steer 76''Single Cylinder Grapple Bucket

895
New 3/4 CY Concrete Placement Bucket

896
New 3/4 CY Concrete Placement Bucket

897
New 76'' Skeleton Bucket Open Sided

898
New 76'' Skeleton Bucket Open Sided

899
New 78'' Skid Steer Bucket with Single Blade

900
New 78'' Skid Steer Bucket with Single Blade

901
New 90'' Snow/Litter Bucket

902
New 90'' Snow/Litter Bucket

903
New 90'' Snow/Litter Bucket

904
New 90'' Snow/Litter Bucket

905
New 66'' Skid Steer Bucket with Single Blade

906
New 78'' Skid Steer Bucket with Teeth

907
New 66'' Skid Steer Bucket with Teeth

908
New 66'' Skid Steer Bucket with Teeth

909
New 40'' Skid Steer Spade Bucket

910
New 40'' Skid Steer Spade Bucket

911
New Skid Steer 70'' Root Rake

912
New Skid Steer 70'' Root Rake

913
New Skid Steer 2" Hitch Receiver

914
New Skid Steer 2" Hitch Receiver

915
New Skid Steer 48'' Fork Frame

916
New Skid Steer 48'' Fork Frame

917
New Skid Steer 48'' Fork Frame

918
New Skid Steer 48'' Fork Frame

919
New Skid Steer Frame

920
New Skid Steer Frame

921
New Skid Steer Frame

922
New Skid Steer Frame

923
New Skid Steer Frame

924
New Skid Steer Frame

925
New Skid Steer Frame

926
New Skid Steer Frame

927
New Skid Steer Frame

928
New Skid Steer Frame

929
New 84" Light Duty Fork Extensions

930
New 84" Light Duty Fork Extensions

931
Fork Lift Forks 48'' Long

932
Log Forks
Log Forks for a John Deere 544H 

1171
* Black Husky Rolling Toolbox
52 x 24.5 x 38H Has 9 drawers and 4 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs.

1172
* Red Milwaukee Rolling Toolbox
61 x 22 x 38H Has 11 drawers, 1 door, and 6 casters. Also has metal peg board. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Several small cosmetic damages.

1173
* Silver Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Missing 1 handle.

1174
* Silver Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Missing 1 handle.

1175
* Black Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs.

1176
* White Husky Rolling Toolbox
72 x 24 x 38H Has 18 drawers and 6 casters. Keys are included. Has powerstrip on right side w/ 6 outlets and 2 USBs. Several dents on left side.

1177
* Bartell Trowel
It is a 7' wide ride on trowel that is powered by a Honda GX620 20hp V-twin engine and has only 114 hours.  Works and runs excellent. 

1178
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

1179
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

1180
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

1181
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

1182
* Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Will ship to you.

1183
* Stone Conveyor
Hydraulic power, folds for transport

1184
* Catwalk Steps

1185
* 9' Auger and Chain

1186
* Gas Powered Blower
It has a 3.5 hp Briggs and Statton engine and is in unknown running condition. 

1187
* Roll of Hydraulic Hose

1188
* Hydraulic Winch
Unknown working condition. 

1189
* New Electric Motor
3-phase, 460 volt, 36 Kw

1190
* New Electric Motor (x2)
3-phase   1.5 hp

1191
* New Electric Motor (x2)
Both are 3-phase and brand new,  Sells with a box of electrical parts. 

1192
* Table Saw & Bench Grinder
Dewalt table saw with a 8'' blade that can cut up to a 45 degree angle and a bench grinder that is on a stand.  Both are in working condition. 

1193
* Rolling Bag Cart
3' x 6' x 11" tall. Missing 1 handle. Writing on cart is: Nutting Faribault, MN.

1194
* Reese 5th Wheel Hitch
14K lbs. Has quick slide.

1195
* Air Compressor
It has Lincoln Electric 15 hp 3-phase motor, 230/460 volt, 120 gallon and is in good working condition. 

1196
* Coleman Power Station 10000 Standby Generator
Powered by a Briggs 570 V-Twin engine that runs on LP or NG. Meter reads 397 hrs. Power output is 120/240 V, and 10,000 watts on LP, or 8500 watts on NG.
SN: A07510076
Model #: PM0621011.02

1197
* Sentry-Pro by Gillette Standby Generator
Meter reads 236 hrs. No generator.

1198
* Skid Of 2 Motors and 2 Generators for Standby Generators
All parts come out of standby generators that run on LP or NG. One generator is a 9600 watt, 120/240 V, and the other one is a 9500 watt, 120/240 V.

1199
* Coleman Power Station 10000 Standby Generator
Powered by a Briggs 570 V-Twin engine that runs on LP or NG. Meter reads 237 hrs. Power output is 120/240 V, and 10,000 watts on LP, or 8500 watts on NG. Works great.
SN: A06310008
Model #: PM0621011.02

1200
* Coleman Power Station Standby Generator
Powered by a Honda engine that runs on LP or NG. Meter reads 261 hrs. Generator output is 120/240 V, 10,800 watts on LP, and 9200 watts on NG.
SN: B2111175
Model #: PM401211

1201
* Standby Generator
Powered by a Kohler engine. Meter reads 305 hrs.

1202
* Briggs and Stratton Standby Generator
Empower series. Generator output is 7000 watts, 240V. LP/NG
SN: 1016978936
Model #: 040301

1203
* Briggs and Stratton Standby Generator
Empower series. Generator output is 7000 watts, 120/240V. LP/NG
SN: 1015471018
Model #: 040220

1204
* Coleman Power Station 15000 Standby Generator
Powered by a Vanguard Daihatsu engine that runs on LP or NG. Meter reads 457 hrs. Generator output is 15,000 watts on LP, or 13,500 on NG, 120/240V. Needs new actuator motor.
SN: A21311230
Model #: PM0621512.01

1205
* Tiger Power Standby Generator
Powered by a Kohler engine that runs on LP or NG. Meter reads 130 hrs. Generator output is 12,000 watts, 120/240V.
SN: 020054
Model #: G12AK01

1206
* Dayton Trailer Stabilizing Jack
5000 lb. lifting capacity. Like new.

1207
* Intellimatic Kwikstart Pro 12V Battery Charger
Fully automatic. 10 A. Engine starter. Missing on/off knob.

1208
* Eagle Fiberglass Containment Pallet
50.5" x 50.5". 4 drum. Low profile. Brand new.

1209
* Dock Plate
Diamond plate. 5000 lb. capacity.

1210
* Dayton Barrell Turner
Has fork pockets.

1211
* Dayton Power Vent
Model: DVR2A.

1212
* Snow Ex Salt Spreader
12V powered.

1213
* Electric Exhaust Fan
38" wide. No motor.

1214
* Electric Exhaust Fan
44" wide. No motor.

1215
* Canarm Electric Exhaust Fan
Model: AX42-7. 42" wide. Includes louver and shield.

1216
* Canarm Electric Exhaust Fan
Model: AX42-7. 42" wide. Includes louver and shield.

1217
* Exhaust Fan Louver
48" wide.

1218
* Exhaust Fan Louver
48" wide.

1219
* Durham Metal Drawer Cabinet
48 drawers.

1220
* Durham Metal Bolt Bin
40 holes.

1221
* Eagle Plastic Dock Plate
For hand trucks only. 31" wide.

1222
* Fluid Kinetics Silencer
Model: BOS 20-73-73. 6' long.

1223
* Pressurized Sand Blaster

1224
* Buzz Saw
30" blade. Roller bearings.

1225
* Hercules Forklift Maintenance Platform
34" x 35".

1226
* Skid of Misc.
Bearings, sprockets, and misc.

1227
* Skid of Flat Bed Truck Sides

1228
* Powerboss Floor Sweeper
In good working condition, built in 2005, has an LP powered 4-cylinder Nissan engine with only 501 hours and comes with the manuals, weighs 3'600 lbs  Model TSS82.  Serial Number: 14895035

1229
* Jet 10" Table Saw
Model: JWSS-10LFR. 110V 78" table. Has Micro glide precision rip fence and guard. Works.
SN: 02123132

1230
* Shop Fox Edge Sander
Model: W1688. 220V Extra belt. Uses 8" x 80" belt. Works good.
SN: 653326

1231
* Acetylene Torch Set
Cart included.

1232
* Millermatic 185 Wire Welder
Tank included. Works, but wire feed hesitates some times.

1233
* 500 Gallon Air Tank

1234
* Skid of Wire Baskets

1235
* Skid of Wire Baskets

1236
* Skid of Wire Baskets

1237
* 2 Ton Floor Jack
Works.

1238
* Lot of Misc.
Includes Lincoln 12V grease gun, Homelite one hand chain saw, and a Task Force electric chop saw.

1239
* Stihl TS700 Concrete Saw
In working condition.

1240
* Lot of Misc.
Includes a Stihl leaf blower, Echo leaf blower, and an Echo hedge trimmer.

1241
* Trail FX Tool Box
Side mount.

1242
* Masterforce Truck Boxes
Includes 2 boxes. One has a bunch of tools.

1243
* Pair of Trailer Jacks

1244
* Lot of Misc.
Includes gooseneck ball and chain hook kit for GM pickup puck system, remote LED spotlight, ratchet tie-downs, and LED marker lights.

1245
* Pelican Paddle Boat
In like new condition. 4 person. Adjustable front seats.

1246
* Gererac 7'000W Standby Generator
It has a Generac 407cc engine that runs on LP or natural gas, 7'000 watt, hours are unknown, auto start and is in working condition. 

1247
* Wet Kit for Semi
It has a new pump and PTO, 2-way pump for high and low volume. 

1248
* Rear Door For Dump Bed
80" wide.

1249
* Over-the-tire Steel Skid Loader Tracks
Complete.

1250
* 4" Water Valves
4 total.

1251
* Tote of Parker Hydraulic Hoses
Mainly 1 1/2".

1252
* Tote of Parker Hydraulic Hoses
Mainly 1", some 1 1/2".

1253
* Twin Air Tanks
They come off of an Ingersoll Rand air compressor.

1254
* Skid of Parker Hydraulic Hoses
2" and 1 1/2".

1255
* 12V Powered Triple Hose Reel
Stainless steel housing. Missing 2 motors.

1256
* Ammco Semi Tire Changer
Complete. Needs one electric motor.

1257
* Engine Hoist
Works.

1258
* Sand Blaster

1259
* 30 Gallon Gas Tank
No holes.

1260
* 2 Exhaust Fans
38" fans.

1261
* Flat Bed Extender
To extend the flat bed on your truck. 94" x 27"

1262
* Truck Ramps

1263
* Engine Stand
750 lb. capacity.

1264
* Stinger 2007 Engine Stand
750 lb. capacity.

1265
* Engine Stand

1266
* Lot of New Tires and Rims
8 lug bolt pattern, 6.5" lug to lug, and 4.5" center hole on rims. Rims are not quite new. Tires are Laredo LT225/75R16.

1267
* Truck Bulk Head
70" wide.

1268
* Industrial Metal Bandsaw
120V

1269
* 2 Ton Chain Hoist

1270
* Crown Pallet Jack
Brand new. 5000 lb. capacity. Model: PTH 50

1271
* Wright Self Dumping Hopper
54" x 62"

1272
* Self Dumping Hopper
34" x 49"

1273
* GalFab Self Dumping Hopper
1 yd.

1274
* Self Dumping Hopper
54" x 59"

1275
* Wright Self Dumping Hopper
54" x 62"

1276
* New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

1277
* New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

1278
* New Teardrop Pallet Racking
Includes (3)-16' x 48" uprights, (12)-9' beams, (6)-46" wire decks, and (6)-58" wire decks.

1279
* New Teardrop Pallet Racking
Includes (3)-12' x 48" uprights, (8)-9' beams, (4)-46" wire decks, and (4)-58" wire decks.

1280
* New Teardrop Pallet Racking
Includes (3)-12' x 48" uprights, (8)-9' beams, (4)-46" wire decks, and (4)-58" wire decks.

1281
* Lumber Racks (X2)

1282
* Lumber Racks (X4)

1283
* Lumber Racks (X4)

1284
* Lumber Racks (X4)

1285
* Lumber Racks (X3)

1286
* Lumber Racks (X4)

1287
* Lumber Racks (X4)

1289
* Wire Baskets (X4)

1289A
* Wire Baskets (X4)

1289B
* Wire Baskets (X4)

1289C
* Wire Baskets (X2)

1289D
* Wire Baskets (X5)

1289E
* Wire Baskets (X3)
Includes steel framed crate that has fork pockets.

1290
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290A
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290B
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290C
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290D
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290E
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290F
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290G
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290H
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290I
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall.

1290J
* Steel Framed Crate
Has fork pockets. 4' x 5' x 54" tall. One small one included.

1291
* Stackable Plastic Crates (X2)
5' x 44"

1291A
* Stackable Plastic Crates (X2)
5' x 44"

1291B
* Stackable Plastic Crates (X3)
5' x 44"

1291C
* Stackable Plastic Crates (X3)
5' x 44"

1291D
* Stackable Plastic Crates (X2)
3' x 44" x 25"H

1291E
* Stackable Plastic Crates (X2)
3' x 44" x 25"H

1291F
* Stackable Plastic Crates (X2)
3' x 44" x 25"H

1291G
* Stackable Plastic Crates (X1)
3' x 44" x 25"H

1291H
* Stackable Plastic Crates (X3)
41" x 44" x 27"H

1291I
* Stackable Plastic Crates (X4)
41" x 44" x 27"H

1292
* Lumber Carts (3)
Includes a 40" x 90", a 42" x 60", and a 44" x 30". The biggest one has casters.

1293
* Rolling Safety Ladder
10" high at the top step.

1294
* Tri Arc Ladder
Ladder to go over your conveyors.

1295
* Self Dumping Hopper
3 yd.

1295A
* RPI Self Dumping Hopper
54" x 64"

1295B
* GalFab Self Dumping Hopper
36" x 60"

1295C
* GalFab Self Dumping Hopper
35" x 52"

1296
* Hercules Engine Hoist
`1-Ton capacity and in working condition. 

1297
Miller CP200 Welder
It is 3-phase, has 100% duty cycle, sells with gun and gauges, lots of wire, 208/230 volt, in good working condition. 

1298
Lot of Pallet Racking
Includes (4)-12' beams, (36)-9' beams, (5)-8'6" uprights, and (6)-91" uprights.

1299
120 Gallon Curtis Air Compressor
Powered by a 10HP, 3PH electric motor. In nice condition!

1300
Box Fan
54" x 54"

1301
Metal Racks (X2)
Both are 39" x 66".

1302
Lumber Carts (X3)
One is 27" x 66" and has casters, one is 38"x 90" and has casters, and one is 40" x53" and has no casters.

1303
Self Dumping Hopper
54" x 65"

1304
Fork Lift Man Cage
32" x 47"

1305
36" Fan
Powered by electric motor.

1306
36" Fan
Powered by electric motor.

1307
New 3 CY Self Dumping Hopper with Fork Pockets

1308
New 90" Cattle Feeder

1309
New 90" Cattle Feeder

1310
New 90" Cattle Feeder

1311
New 90" Cattle Feeder

1312
New 90" Cattle Feeder

1313
New 90" Cattle Feeder

1314
New 90" Cattle Feeder

1315
New 90" Cattle Feeder

1316
New 90" Cattle Feeder

1317
New 90" Cattle Feeder

1318
New 29" X 90" Steel Work Bench with Shelf

1319
New 29" X 90" Steel Work Bench with Shelf

1320
New 30" x 90" Steel Work Bench with 10GA Top

1321
New 30" x 90" Steel Work Bench with 10GA Top

1322
New 30" x 90" Steel Work Bench with 10GA Top

1323
New 30" x 90" Steel Work Bench with 10GA Top

1324
New 30" x 57" Welding Table

1325
New 30" x 57" Welding Table

1326
New 30" x 57" Welding Table

1327
New 30" x 57" Welding Table

1328
New 30" x 57" Welding Table

1329
New 30" x 57" Welding Table

1330
New Dueling Tree Shooting Target for .22 Caliber

1331
New Dueling Tree Shooting Target for .22 Caliber

1332
New 3/8 AR500 Gong Shooting Target

1333
New 3/8 AR500 Gong Shooting Target

1334
New 3/8 AR500 Gong Shooting Target

1335
New 3/8 AR500 Gong Shooting Target

1336
Surface Grinder
Made by K.O. Lee Company, converted to single phase with a brand new electric motor that is mounted but not yet hooked up. It also includes the original 3 phase motor.   

1337
Metal Sheet Slitter
Made by Gary Machinery, has a 4' wide capacity, and is powered by a Dayton 3/4 hp electric motor. 

1338
Power Auger
Powered by a Tecumseh engine. 8" wide x 3' long

1339
Truck Tool Box
61.5" bed width and 21" deep.

1340
Metal Racks (3)

1341
Self Dumping Hopper
2 yd.

1342
Crates (2)
1 is metal and the other is plastic.

1343
Quadra-Fire Pellet Stove
Classic Bay CB1200 2006 model
Brand new Convection Blower (rear blower).
Brand new Combustion Blower Housing To Stove Gasket (side blower)
Newer Rope Gasket on the front door
New paint with Ace Rust Stop BBQ Black Spray Paint
Comes with electric plug and thermostat and full bag of pellets
Has always run well; last fired Feb 2022.

 

1344
Acetylene Torch Set
Sells with the cart.

1345
Truck Flat Bed
It is 8' wide x 91/2' long 

1346
Fork Lift LP Tank

1347
Fork Lift LP Tank

1348
Fork Lift LP Tank

1349
Fork Lift LP Tank

1350
Fork Lift LP Tank

1351
Pallet of (8) Furrion RV Ranges

Photo Gallery