MARCHAND WOODWORKS LLC
Listing ID#: 486637

Sale Location

LIVINGSTON, AL 35470
Sale Dates and TimesSALE IS COMPLETED
Saturday May 14, 2022 Completed
Sale Type
   Live with Online Auction 
Company Information
Tri-State Auction & Realty, LLC

Contact: James Savage
Phone: 865-376-7009
Email: auctions@tristate-auction.com
Website: tristate-auction.com

EstateSale.com ID#: 13277
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS.

All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION).

Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Information

Absolute Auction

Marchand Woodworks , LLC

2684 McDowell Road

Livingston, Alabama 35470

Saturday May 14 10:00 am CST

 

AL LIC # 5449 

·         2016 Woodmizer 4000  band mill with 6,782 hours

·         Woodmizer 10ft incline conveyer

·         Woodmizer Hydraulic power unit

·         Meadows 4 strand 22ft long deck with hydraulic drive

·         24in 20ft roll case with kickers and 3 stop gates electric drive with variable speed controls

·         18in 26ft roll case electric drive with kickers and stop gates

·         4 strand 8ft transfer deck with electric drive and 5 horsepower chain bucksaw

·         2 strand 10ft crosstie stacker

·         10 ft gravity roll on hydraulic scissor lift

·         Custom built 18ft trim saw with 20-inch saws 6 saws set at 16” for firewood 3 saws set at 46” for pallet stringers --all saws are adjustable

·         2 horizontal outfeed conveyers for trim saw

·         2 incline outfeed conveyers for trim saw

·         15 horsepower champion air compressor

·         Starters, contacts and drives for all above equipment

·         4 strand 24ft log deck with electric drive

·         2 saw Morgan Slab Edger with 2 25 horsepower motors

·         18 ft custom built firewood trim saw with 26in saws set at 16” are adjustable

·         8 ft chain infeed deck

·         1 horizontal outfeed conveyer

·         1 outfeed incline conveyer

·         10 ft turntable with electric drive

·         Starters, contacts and drives for all above

·         Woodmizer LT70 with 25 horsepower electric motor and independent 10 horsepower hydraulic unit

·         6ft Woodmizer extension for LT70

·         3 strand 12 ft log deck with electric drive

·         2004 TImberKing 2k560DS knuckleboom loader with de-limber and bucksaw 20,000 hours on machine. 4,000 hours on rebuilt motor

·         (1) of (2) KB Loaders 2008 Caterpillar 519 Knuckleboom loader 9240 hours with bucksaw

·         2016 Caterpillar 926M Wheel loader with whicker lumbar forks 7,415 hours

·         2–8yard firewood buckets

·         2-4yard buckets for loader

·         PS and D automatic pallet wrapper

·         Morgan 2 head band resaw has 2 20 horsepower motors need starters and compacts (not installed)

·         5 DD1200 Desiccant dehumidifiers by EBAC USA 560 pint per day moisture extract per unit

·         18 24” high output high temp kiln fans

·         2015 Cord King M60 firewood processor with additional log cut up system and log outfeed conveyer

·         30 ft incline Cord King conveyer with trash separator

·         30in by 30ft horizontal stacking conveyer

·         3 low profile pallet turn tables

·         10 ft barn sweep with electric drive (not installed)

·         24ft barn sweep with electric drive (not installed)

·         60ft barn sweep with electric drive and inclined section (not installed)

·         30 in suction blower (not installed)

·         36 in suction blower (not installed)

·         2 4strand 10 ft transfer deck one with electric drive one without (both uninstalled)

·         Challenger low speed grinder with infeed and high amp overload controls (not installed)

·         New teeth and holder for grinder (not installed)

·         Morgan 4 saw 50 horsepower gang edger with spacers (not installed)

·         2 18in by 16 ft incline conveyers (not installed)

·         8 firewood wrappers

·         4 self-dumping hoppers for forklift

·         60 ft Weigh Tronix scales with controls

·         Cook Cat Claw sharpener with duel setter

 

 
Photo Gallery

No photos have been uploaded for this sale.
Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

MARCHAND WOODWORKS LLC

Tri-State Auction & Realty, LLC

Tri-State Auction & Realty, LLC

Contact: James Savage
Phone: 865-376-7009
Sale Location
2684 MCDOWELL ROAD
LIVINGSTON, AL 35470
Sale Dates and Times
Saturday May 14, 2022 Completed
Sale Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Details

Absolute Auction

Marchand Woodworks , LLC

2684 McDowell Road

Livingston, Alabama 35470

Saturday May 14 10:00 am CST

 

AL LIC # 5449 

·         2016 Woodmizer 4000  band mill with 6,782 hours

·         Woodmizer 10ft incline conveyer

·         Woodmizer Hydraulic power unit

·         Meadows 4 strand 22ft long deck with hydraulic drive

·         24in 20ft roll case with kickers and 3 stop gates electric drive with variable speed controls

·         18in 26ft roll case electric drive with kickers and stop gates

·         4 strand 8ft transfer deck with electric drive and 5 horsepower chain bucksaw

·         2 strand 10ft crosstie stacker

·         10 ft gravity roll on hydraulic scissor lift

·         Custom built 18ft trim saw with 20-inch saws 6 saws set at 16” for firewood 3 saws set at 46” for pallet stringers --all saws are adjustable

·         2 horizontal outfeed conveyers for trim saw

·         2 incline outfeed conveyers for trim saw

·         15 horsepower champion air compressor

·         Starters, contacts and drives for all above equipment

·         4 strand 24ft log deck with electric drive

·         2 saw Morgan Slab Edger with 2 25 horsepower motors

·         18 ft custom built firewood trim saw with 26in saws set at 16” are adjustable

·         8 ft chain infeed deck

·         1 horizontal outfeed conveyer

·         1 outfeed incline conveyer

·         10 ft turntable with electric drive

·         Starters, contacts and drives for all above

·         Woodmizer LT70 with 25 horsepower electric motor and independent 10 horsepower hydraulic unit

·         6ft Woodmizer extension for LT70

·         3 strand 12 ft log deck with electric drive

·         2004 TImberKing 2k560DS knuckleboom loader with de-limber and bucksaw 20,000 hours on machine. 4,000 hours on rebuilt motor

·         (1) of (2) KB Loaders 2008 Caterpillar 519 Knuckleboom loader 9240 hours with bucksaw

·         2016 Caterpillar 926M Wheel loader with whicker lumbar forks 7,415 hours

·         2–8yard firewood buckets

·         2-4yard buckets for loader

·         PS and D automatic pallet wrapper

·         Morgan 2 head band resaw has 2 20 horsepower motors need starters and compacts (not installed)

·         5 DD1200 Desiccant dehumidifiers by EBAC USA 560 pint per day moisture extract per unit

·         18 24” high output high temp kiln fans

·         2015 Cord King M60 firewood processor with additional log cut up system and log outfeed conveyer

·         30 ft incline Cord King conveyer with trash separator

·         30in by 30ft horizontal stacking conveyer

·         3 low profile pallet turn tables

·         10 ft barn sweep with electric drive (not installed)

·         24ft barn sweep with electric drive (not installed)

·         60ft barn sweep with electric drive and inclined section (not installed)

·         30 in suction blower (not installed)

·         36 in suction blower (not installed)

·         2 4strand 10 ft transfer deck one with electric drive one without (both uninstalled)

·         Challenger low speed grinder with infeed and high amp overload controls (not installed)

·         New teeth and holder for grinder (not installed)

·         Morgan 4 saw 50 horsepower gang edger with spacers (not installed)

·         2 18in by 16 ft incline conveyers (not installed)

·         8 firewood wrappers

·         4 self-dumping hoppers for forklift

·         60 ft Weigh Tronix scales with controls

·         Cook Cat Claw sharpener with duel setter

 

 
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
MARCHAND WOODWORKS LLC
 Live Auction w/Online Bidding
 
Sale Date(s)
Saturday May 14, 2022 Completed
Sale Location

LIVINGSTON, AL 35470
Company
Tri-State Auction & Realty, LLC

Contact: James Savage
Phone: 865-376-7009
Email: auctions@tristate-auction.com
Website: tristate-auction.com

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.

Absolute Auction

Marchand Woodworks , LLC

2684 McDowell Road

Livingston, Alabama 35470

Saturday May 14 10:00 am CST

 

AL LIC # 5449 

·         2016 Woodmizer 4000  band mill with 6,782 hours

·         Woodmizer 10ft incline conveyer

·         Woodmizer Hydraulic power unit

·         Meadows 4 strand 22ft long deck with hydraulic drive

·         24in 20ft roll case with kickers and 3 stop gates electric drive with variable speed controls

·         18in 26ft roll case electric drive with kickers and stop gates

·         4 strand 8ft transfer deck with electric drive and 5 horsepower chain bucksaw

·         2 strand 10ft crosstie stacker

·         10 ft gravity roll on hydraulic scissor lift

·         Custom built 18ft trim saw with 20-inch saws 6 saws set at 16” for firewood 3 saws set at 46” for pallet stringers --all saws are adjustable

·         2 horizontal outfeed conveyers for trim saw

·         2 incline outfeed conveyers for trim saw

·         15 horsepower champion air compressor

·         Starters, contacts and drives for all above equipment

·         4 strand 24ft log deck with electric drive

·         2 saw Morgan Slab Edger with 2 25 horsepower motors

·         18 ft custom built firewood trim saw with 26in saws set at 16” are adjustable

·         8 ft chain infeed deck

·         1 horizontal outfeed conveyer

·         1 outfeed incline conveyer

·         10 ft turntable with electric drive

·         Starters, contacts and drives for all above

·         Woodmizer LT70 with 25 horsepower electric motor and independent 10 horsepower hydraulic unit

·         6ft Woodmizer extension for LT70

·         3 strand 12 ft log deck with electric drive

·         2004 TImberKing 2k560DS knuckleboom loader with de-limber and bucksaw 20,000 hours on machine. 4,000 hours on rebuilt motor

·         (1) of (2) KB Loaders 2008 Caterpillar 519 Knuckleboom loader 9240 hours with bucksaw

·         2016 Caterpillar 926M Wheel loader with whicker lumbar forks 7,415 hours

·         2–8yard firewood buckets

·         2-4yard buckets for loader

·         PS and D automatic pallet wrapper

·         Morgan 2 head band resaw has 2 20 horsepower motors need starters and compacts (not installed)

·         5 DD1200 Desiccant dehumidifiers by EBAC USA 560 pint per day moisture extract per unit

·         18 24” high output high temp kiln fans

·         2015 Cord King M60 firewood processor with additional log cut up system and log outfeed conveyer

·         30 ft incline Cord King conveyer with trash separator

·         30in by 30ft horizontal stacking conveyer

·         3 low profile pallet turn tables

·         10 ft barn sweep with electric drive (not installed)

·         24ft barn sweep with electric drive (not installed)

·         60ft barn sweep with electric drive and inclined section (not installed)

·         30 in suction blower (not installed)

·         36 in suction blower (not installed)

·         2 4strand 10 ft transfer deck one with electric drive one without (both uninstalled)

·         Challenger low speed grinder with infeed and high amp overload controls (not installed)

·         New teeth and holder for grinder (not installed)

·         Morgan 4 saw 50 horsepower gang edger with spacers (not installed)

·         2 18in by 16 ft incline conveyers (not installed)

·         8 firewood wrappers

·         4 self-dumping hoppers for forklift

·         60 ft Weigh Tronix scales with controls

·         Cook Cat Claw sharpener with duel setter