Bright Star Equipment Auction Day 2 Ring #1
Listing ID#: 569121

Sale Location

Middlebury, IN 46540
Sale Dates and TimesSALE IS COMPLETED
Thursday Apr 6, 2023 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions


Bidder Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid day of auction for onsite bidders and within 7 days for online purchasers. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.

“Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.

“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.

"Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.

  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within seven (7) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Bright Star Equipment Auction * All items sell absolute* No Minimums * No Reserves * Consign now for free advertising * Items wanted include but not limited to Skid Loaders - Excavating Equipment - Contractors Equipment - Rolling Stock - Semi Trucks - Dump Trucks - Trailers - Attachments Much Much More. Call Bronson 574.210.3721 or Tim 269-986-5693 to consign early for maximum free advertising.

00
Information Lot
Looking for quality consignments of construction, excavating, forestry, and other heavy equipment. We will be taking consignments until Monday, April 3rd. Free loadout day of the auction until 4 PM. Office will be closed on Friday, April 7, due to the Good Friday holiday. Free loadout Saturday, April 8, from 8 am to 1 PM, and until April 21st M-F from 8 AM – 4 PM. After that by appointment and for a $25 per lot loading fee. Any items not picked up in 30 days become the property of the auction company.

1500
2004 Ford Ranger Pickup Truck
Year: 2004
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 195,567
Body Type: Extended cab
Trim Level: XLT
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); SOHC
Fuel Type: Gasoline
Horsepower: 203-210HP
Transmission: Automatic
VIN #: 1FTZR45E14PA25396

Features and Notes: power windows and lock, hitch, rebuilt title. Contact Bronson with any questions 574-210-3721

1475
1996 Ford F-450 Pickup Truck, VIN # 1FDLF47GXTEB77700 Bucket Truck*
Year: 1996
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage:274432
Plate:
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x2
Engine Type: V8, 7.5L (460 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic
VIN #: 1FDLF47GXTEB77700

Features and Notes: Starts but runs rough. Contact Tim Graber 269-986-5693.

1
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

1501
1998 Dodge Ram Pickup Pickup Truck
Year: 1998
Make: Dodge
Model: Ram Pickup
Vehicle Type: Pickup Truck
Mileage: 248,773
Body Type: Extended cab
Trim Level: Base
Drive Line: 4WD
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1B7KF2366WJ212732

Features and Notes: 4x4, it has 24 V Cummins Diesel, extended cab with 3rd and 4th door, power interior, trailer brakes, boss plow mount, Rhino lined bed. Contact Bronson with any questions 574-210-3721

2
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1502
2003 Honda Civic
Mileage: 283,895
Body Type: 4 Door Sedan
Trim Level: EX
Drive Line: FWD
Engine Type: L4, 1.7L; VTEC-E
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1HGES26823L025270

Features and Notes: It is a 4-door that seats 5, has power windows, locks, mirrors and has a sunroof, It does start and run. Sells with mechanics lien paperwork. Call Bronson 574-210-3721  

1675
1969 Allis Chalmers 180
Powered by a 4.3 liter 6 cylinder gasoline engine. Rated for 65HP at 2000 RPM backed by an 8-speed partial powershift transmission. Right rear hub plate and bolts bolts were just replaced. 18.4-28 tires with 16" rims. Tires are at about 50%. Meter reads 6653 hours. Very well maintained, good running, clean machine. Contact Myron Miller 574-536-6306.

1676
1952 Ferguson Tractor
Model: T0 30
SN: 82502
Meter reads: unknown
Engine: Continental 2.1L 4 cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: Rear wheel
Rear PTO: yes
3 Point hitch: yes

Features and Notes: new headlights
 

1503
2004 Ford F-450 Pickup Truck, VIN # 1FDXF47P04ED48568
Year: 2004
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage: 227,971 miles
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 6.0L (366 CID); Turbo
Fuel Type: Diesel
Horsepower: 325HP
Transmission: Automatic
VIN #: 1FDXF47P04ED48568

Features and Notes: 4 wheel drive, brake controller, Leather interior, runs and drives, 8' x 8 1/2' aluminum flat bed, gooseneck hitch

1503
2002 Ford F-350 Pickup Truck
Year: 2002
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage: 375,112 miles
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic
VIN #: 1FTSW31F92ED18412

Features and Notes: Engine come with performance chip. Has leather interior, long bed, and gooseneck hitch, has title.  Contact Bronson with any questions 574-210-3721

1504
2000 Ford F-550 Truck, VIN # 1FDAW57F1YEA21072
Year: 2000
Make: Ford
Model: F-550
Vehicle Type: Truck
Mileage: 145,505 miles
Body Type: Crew Cab
Drive Line: 4x4
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1FDAW57F1YEA21072

Features and Notes: Engine light is on, starts with jump pack and starting fluid, 8' x 9' dump box

1677
1946 McCormick Farmall Tractor
Model: M
SN: 121381X1
Meter reads: unknown
Engine: 4.1L 4 cylinder
Fuel type: Gasoline
Transmission type: 5 speed sliding gear
Drive: 2 WD
Rear PTO: yes
3 Point hitch: no

Features and Notes: starts and runs but loses power when put into gear
 

1504
2000 Chevrolet Express Van
Year: 2000
Make: Chevrolet
Model: Express
Vehicle Type: Van
Mileage: 215,211 miles
Body Type: 3 Door Van; Sport
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNGG25RXY1155276

Features and Notes: has a brand new passenger rear tire, in running condition. Contact Myron with any questions 574-536-6306

1505
2013 Ford F-150 Pickup Truck
Year: 2013
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 151,715 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XL; Limited; Platinum; XLT; Lariat; King Ranch; FX4
Drive Line: 4WD
Engine Type: Remanufactured Jasper Engine (installed at 118,000 miles)
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1FTFW1ET7DFA13994

Features and Notes: Has leather heated interior, trailer brakes, navigation and bluetooth compatible. Its full digital display. Comes with a tonneau cover for the short bed. Truck has all LED lights. Jasper Engine is still under warranty. Paint does have runs in it. Newer tires.***rebuilt title Contact Bronson with any questions 574-210-3721

1678
1940 Ford Tractor
Model: 9N
SN: 9N15314
Engine: 4-cylinder, 26 hp
Fuel type: gas
Transmission type: 3-speed with reverse
Drive: 2-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: it has been converted to 12 volt, Carburetor does leak when sitting for extended time, brakes do need work, studded front tires, runs and operates. Contact Bronson with any questions 574-210-3721
 

1679
1942 Allis Chalmers Tractor
Model: B
SN: B58938
Engine: 1.9L 4-cylinder
Fuel type: Gasoline
Transmission type: Unsynchronized gear, 3 forward 1 reverse 
Drive: 2 wheel
Rear PTO: no
3 Point hitch: no

Features and Notes: full restored 8 years ago, tires are in very good condition, electric start, has lights, 6V new water pump, it has rare flared fenders. The alternator was just completely rebuilt along with a new battery and coil. Contact Myron with any questions 574-536-6306
 

1506
2006 Ford F-150 Pickup Truck
Year: 2006
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 267,062 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XLT; Lariat; King Ranch
Drive Line: RWD
Engine Type: V8, 5.4L; FFV
Fuel Type: Gasoline/E85
Transmission: Automatic
VIN #: 1FTPW12V26KD63618

Features and Notes: seats 6, short bed. Its starts and runs, idles rough. Contact Bronson with any questions 574-210-3721

1507
2005 Chevrolet TrailBlazer EXT Multipurpose Vehicle
Year: 2005
Make: Chevrolet
Model: TrailBlazer EXT
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 201,773 miles
Body Type: 4 Door Wagon
Trim Level: LS; LT
Drive Line: 4WD
Engine Type: V8, 5.3L; SFI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNET16M556190628

Features and Notes: Has 3 row seating and all powered heated leather interior. Dual climate controls. It starts and runs. The check engine light is on and power steering is not working. Contact Bronson with any questions 574-210-3721

1680
1986 Massey Ferguson Tractor
Model: 1030D
SN: 41344
Meter reads: 1184 hours
Engine: 1.4 liter 3-cylinder 26hp
Fuel type: Diesel
Transmission type: Manual
Drive: 4-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: Front end loader, four gears, plus reverse in three ranges (L-M-H), engine was fully rebuilt 2 years ago, good running well maintained machine. Contact Myron Miller with any questions 574-536-6306
 

1550
1995 RS Open Top Chip Trailer
VIN: 1R217D2A5S2001158, 53' long, last inspected 06/2021, good cover. Contact Bronson with any questions 574-210-3721

1681
1950 Ford Tractor
Model: 8N
SN: 253708
Engine: 2.0L 4-cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 4 forward and 1 reverse gears, converted to 12V, lights work, new clutch and alternator, in good running condition. Contact Myron Miller with any questions 574-536-6306
 

1551
1978 Fruehauf Open Top Chip Trailer
VIN: MEZ605050, 53' long, last inspected 07/2022, good cover. Contact Bronson with any questions 574-210-6721

1682
Massey Ferguson
Model: 1220
SN: C24206
Meter reads: 558
Engine: Iseki E3112 3-cylinder
Fuel type: Diesel
Transmission type: Manual
Drive: 4WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 6 forward and 2 reverse gears. Includes 6' front mount snow blade. Front and rear light bars, original lights and shift knob are included. In very good condition. Contact Myron Miller with any questions 574-236-6306
 

2029
New Chain and Binder Sets
5 sets of Ratchets rated at 5'400 lbs, and 10 5/16" chains 20' long.  Call Bronson 574-210-3721 

1552
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492056, 53' long, last inspected 04/2020, not currently road worthy, missing back door. Contact Bronson with any questions 574-210-6721

1683
John Deere A Tractor
Engine: 5.1 Liter 2 cylinder
Fuel type: Gas
Transmission type: Manual with slide clutch
Drive: RWD
Rear PTO: yes
3 Point hitch: no

Features and Notes: 4 speed unsychronized gear, does not run, needs work. Contact Myron Miller with any questions 574-536-6306
 

1553
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492090, 53' long, last inspected 04/2019, not currently road worthy

1684
1947 Farmall M Tractor*
SN: 137010X1
Engine: 4.1 Cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch:  no

Features and Notes: New starter. 5 speed sliding gear. Runs and operates however the hydraulic needs work and it has a slight gas leak if it is not shut off. Contact Myron Miller with any questions 574-536-6306
 

1554
1976 Timpte D31 Walking Floor Trailer
VIN:D31BN68850,  The live floor works. It has new tarp and new back doors. The trailer does need some work. It works off of wet kit. Contact Bronson with any questions 574-210-3721

1685
2017 Kubota L4701D Tractor*
SN: 61915
Meter reads: 1,440 hours
Engine: 4- cylinder 2.4 liter Kubota 47hp
Fuel type: Diesel
Transmission type: Hydrostatic
Drive: 4WD
Rear PTO: yes, 540
3 Point hitch: yes

Features and Notes: It has a 72" front loader bucket wit quick attach, rear back hoe attachment with 12" x 18", and 24" buckets, D.P.F. has been deleted, runs and drives good. Contact Bronson with any questions 574-210-3721
 

1725
AG National Products Bale Wrapper
SN: 41087, with skid loader mount, wraps 4' x 5' round bales, standard flow hydraulics. Contact Bronson with any questions 574-210-6721

1555
2016 Team Spirit Gooseneck Trailer
VIN: 1T9LD2629GE661409
Tandem axle with working lights and brakes, was converted from bumper pull to gooseneck and used as an insulation trailer. Contact Myron Miller with any questions 574-536-6306

1726
Aitchison No Till Grain Drill
SN: 3803, with double disk opener retro fil, 8' wide, 16 row, ground driven, foam feed rolls. Contact Bronson with any questions 574-210-6721

1575
2003 PJ Gooseneck Trailer
VIN: 4P5GN262731053884, 8' wide x 25' long with 5' dove tail and 4' rams, Dual tandem axles rated at 10000 lbs each, 20000 GVWR. Has good decking and needs tires. Contact Bronson with any questions 574-210-3721

1727
Jay-Lor A50 Feed Mixer
SN: 018033, Powered by a Briggs and Stratton 13 hp Vangaurd engine with an electric start. It's self propelled with scale. 50' cubic foot capacity. It runs and operates. Contact Bronson with any questions 574-210-3721

1576
1984 Jayco 28' 5th Wheel Camper
VIN: MVIN168721IND
full kitchen, dinette sofa, front bedroom, bathroom. Does show signs of roof leaking, awning. Contact Bronson with any questions 574-210-3721

1577
1994 Wells Cargo Enclosed Trailer
Year: 1994
Make: Wells Cargo
Model: TW101-V / 2-Place MC122-7 TE
Vehicle Type: Trailer
Body Type: Aluminum
VIN #: 1WC200E11R1064126

Features and Notes: 6' x 12', has swinging rear door, new axle, spare tire, shelving, adjustable height, 2 coupler pulls with 2 5/16" ball. Contact Bronson with any questions 574-210-3721

1728
John Deere 930 Moco Impeller Haybine
Uses 1000PTO with tractor hydraulics, missing PTO link, in good condition. Contact Myron with any question 574-536-6306

1578
Dump Trailer
Manure spreader converted to sawdust trailer. Pulls with pin hitch. Trailer has Tandem axle, tarp top, good cover. Hydraulic powered dump. 7'W x 16'L. Does not come with a title. Contact Bronson with any questions 574-210-3721

1729
Hesston 4900 Hay Baler
SN: BB49-00738, 1000 PTO driven with monitor with applicator, produces 4.4 hay bales. Contact Bronson with any questions 574-210-3721

1579
2010 Trailer
VIN: 4YMLT122XAG090305, 6' x 12 inside width, Tandem 3500 lb axles. includes LED lights, brakes, adjustable coupler. 7000 GVWR, swing rear doors, 2 5/16 ball, has title. Contact Bronson with any questions 574-210-3721

1730
John Deere 7000 Planter
13'wide, 6 row, good working condition. Just reconditioned by Shipps Precision. Has new parts and is field ready. Contact Bronson with any questions 574-210-3721

1580
2008 Car Mate Trailer
Year: 2008
Make: Car Mate Trailers
GVWR: 2990
VIN #: 5A34510S28L003350

Features and Notes: 5' x 10' with 4' drive on ramp. Has 5-lug axle, pulls with 2" ball, and has LED lights. Trailer is in good condition. Contact Bronson with any questions 574-210-3721

1731
Esch 5512 No Till Drill
In good condition and field ready. Extra parts included, storage cover included. Contact Bronson with any questions 574-210-3721

1581
8x16 Coach Craft Aluminum Trailer
VIN: 1C9EU12212B746361
tandem 5 lug 3500 lb torsion axles, pulls with 2 5/16" ball, ramp style rear door and curbside, 7' inside height, front jack wheel is broken, brakes need to be hooked up, in good condition. No title, comes with a bill of sale only. Contact Myron Miller with any questions 574-536-6306

1732
Rain Bow Irrigation Systems
Traveling irrigation unit, 2 hoses at approx. 600'. Does have small leaks. Powered by Honda engine and turbine. Contact Bronson with any questions 574-210-3721

1650
16' Ebbtide Boat
Engine is incomplete and the interior needs redone, bill of sale only. Contact Myron Miller 574-536-6306

1733
Case IH Crumbler
24' wide, product ID number: JFH0034045, only used 1 season. Contact Bronson with any questions 574-210-3721

1651
820 Aqua Patio Pontoon
13 person, comes with 35hp Johnson and has 24' toons, would make a good project boat, sells with Bill of Sale only. Contact Myron with any questions 574-536-6306

1734
Oliver 546 Plow
5-bottom plow, in good working condition. Contact Bronson with any questions 574-210-3721

1735
Art's -Way PM 30 Tub Grinder Mixer*
SN: AWPM30950413
Model: FPS-PM-0006
150 Bushel capacity
Includes digital scale and adapters to run off single remote hydraulic. Contact Bronson with any questions 574-210-3721

1736
Grain Cart*
5' wide x 7' long, PTO operated with auger and tarp cover. Contact Bronson with any questions 574-210-3721

1737
Gravity Wagon*
6' wide x 10' long, with new cover. Contact Bronson with any questions 574-210-3721

1738
20' Field Cultivator*
12' main with 4' bat wings. The hydraulics work but the hoses will need to be replaced. One tire is missing. Contact Myron Miller with any questions 574-536-6306

1739
8' John Deere Pull Behind Seeder*
Model: LF Serial: 18218. Contact Myron Miller with any questions 574-536-6306
 

1740
White Chisel Plow*
7 row. Contact Bronson with any questions 574-210-3721

1741
Plow Packer*
8' wide. Contact Bronson with any questions 574-210-3721

1750
1995 Froedge 450 Deduster
SN: 25050, Model: 121BD 18BC, electric drive, wired for 220V 3 phase, needs new brushes, up to 8" wide, up to 6" thick and up to 8' in length capacity, in good condition. Contact Myron Nissley with any questions 574-536-2481

1751
Smart Single Head Notcher
Single head, 20 hp electric drive, wired for 220V 3 phase, manual feed, 72" capacity, 9" wide cutter head, indexable teeth, electric drive board kicker, ready for production. Contact Myron Nissley with any questions 574-536-2481

1752
Heartland Chop Saw
18" blade, includes adjustable board stops, mounted to 30" wide x 70" long x 36" high steel bench, 10 hp electric motor on head, wired for 220V 3 phase. Contact Myron Nissley with any questions 574-536-2481

1753
Belt Conveyor
12" x 11' conveyor with 11" belt, 3/4 hp electric motor. Contact Myron Nissley with any questions 574-536-2481

1754
Pacific Trail Yard Saw
Powered by a Honda GX630 electric start engine. It has a 6' cutting capacity and comes with 5 extra blades.This unit is in like new condition and was used to cut only 2 loads of bundles. In working condition. Contact Myron Miller with any questions 574-536-6306
 

1775
120 KW Natural Gas Genset
Powered by a 454 big block engine fully rebuilt with all stainless parts only 2000 hours ago. The generator is a Marelli with a total of 2000 hours. It is a 480V system with an electronic governor set at 1800 RPM. Great running well maintained machine. Contact Myron Miller 574-536-6306

 

1776
Miller Big Blue 402D Welder/Generator
SN: LB106031, 698 hours, Duetz Diesel Engine, TIG/Stick/MIG welder, single and 3 phase generator. In excellent working condition. Contact Bronson with any questions 574-210-3721

1777
Kohler 125 Genset
SN: 3366GMGH0036, Model: 125REOZJG, 60 Hz., 3 phase, 128 kw., 3 pole 250 amp and 150 amp breaker manufactured 7/16/19. 4.5L John Deere diesel engine Model: 4045HF285, SN: PE4045N022679, 1800 rpm meter reads, .6 hour, started 12 times, 6" x 12" x 6" temporary gas tank, 106" x 44" x 60" overall size, needs new battery, starts without hesitation. Contact Dan with any questions 574-612-0074

1778
Empire Genset
SN: 371-122, Model: 550DGW-8E, 6-cylinder Perkins diesel engine, 3121 hours, 50kw, 120/208 V, starts and runs good, control box will need some work. Contact Bronson with any questions 574-210-3721

1779
Kohler Genset
SN:448445-C2, Model: C605, International V8 natural gas powered, 493 hours, 277/4880 V, 3-phase, 88kw, generator works, starts and runs as it should. Contact Bronson with any questions 574-210-3721

1780
John Deere Power Unit
SN: RG6619A062541, With attached corn chopper mounted on heavy duty trailer with skid loader tires. Meter reads 558 hours, has a clutch, 6-cylinder diesel engine. Contact Bronson with any questions 574-210-3721

1781
Genset 2-Cylinder Diesel with 8 KW Generator
Shows 9843 hours, Murphy switch may need replaced but otherwise works well. Contact Bronson with any questions 574-210-3721

1782
Kohler 14KW Propane Power Unit*
4 110V outlets and 1 125/250V 50A outlet.Good working unit. Contact Myron Miller with any questions 574-536-6306

1783
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1784
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1800
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1801
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1802
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1803
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1804
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1805
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1806
New Skid Steer Rock Grapple Bucket
72'' working width, pictures coming soon.  Call Bronson 574-210-3721 

1807
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1808
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1809
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1810
New Pallet Fork Extensions 10
New 10' Pallet fork extensions rated for 6600 lbs.  Call Bronson 574-210-3721 

2000
New 40' Shipping Container
New 40', high cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

1811
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2001
40' Shipping Container Tiny House
It is fully wired and insulated and has rear patio doors behind the shipping container doors that can be removed and have a nice deck installed, It has 2 bedrooms, that could be an office, It has a bathroom and office that are not plumbed.  It is insulated, ventilated, and has double hung windows and a slanted roof.  Call Bronson 574-210-3721 

1812
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2002
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1813
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2003
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1814
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2004
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1815
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2005
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1816
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2006
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

1817
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.6.

2007
New Bastone 2 Portable Restroom Stalls
The Bastone, 2 private stalls, portable restroom features a toilet, a sink, a light and an extractor and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. 
  • Dimensions (ft): L4.3*W7*H7.7 
  • 1/2" female inlet ports for hot & cold water
  • 3" black water/waste exhaust flexible hose (easily slide your 3" PVC pipe onto flex fitting for waste)
  • 1" PVC water outlet exhaust port (for sink water)
  • Bowl Shape: elongated
  • Mount type: wall mounted
  • Flush volume: 1.6 gpf
  • Condition: New
  • Call Bronson 574-210-3721

1818
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2008
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1819
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2009
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1820
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2010
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1821
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2011
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1822
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2012
New Container Shelter
20' X 20' X 6'6'' with 5 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1823
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2013
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1824
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width. In brand new condition. Contact Myron Miller 574-536-6306.

2014
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1825
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2015
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1826
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2016
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1827
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9".In brand new condition. Contact Myron Miller 574-536-6306.

2017
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1828
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9". In brand new condition. Contact Myron Miller 574-536-6306.

2018
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1829
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2019
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1830
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2020
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1831
2022 Wolverine Concrete Breaker
Model 750 In brand new condition. Contact Myron Miller 574-536-6306.

2021
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1832
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2022
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1833
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2023
New Steelman Work Bench Toolbox

Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Blue in color

1834
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2024
New Steelman Work Bench Toolbox
Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Red in Color

1835
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2025
New Steelman Work Bench Toolbox
Model 7FT-35D. It has 35 drawers and 1 cabinet, 3 rail sliding drawers, anti slip mats, 110 lb rating per drawer. Call Bronson 574-210-3721

1836
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2026
New Highway Safety Cones
Lot of 250 safety cones in new condition. 

1837
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2027
New 24 Piece Ratcheting Tie Downs*
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

1838
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2028
New Chain and Binder Sets
5 sets of Ratchets rated at 9'200 lbs, and 10 3/8" chains 20' long.  Call Bronson 574-210-3721 

1839
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2030
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

1840
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2031
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

1841
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2032
New 12'000 lb Electric Winch
12 volt, ready to install. Call Bronson 574-210-3721 

1842
2022 Wolverine Vibratory Roller
60" with a stimulation force of 3.3T. In brand new condition. Contact Myron Miller 574-536-6306.

2033
New 28'' x 90'' KC Steel Work Bench*
Call Bronson 574-210-3721 

1843
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2100
Kubota B6000E Tractor
Powered by a water cooled 4cycle 2cylinder diesel rated at 12.5HP at 2700rpm. 6 forward gears and 2 reverse. 3 point with pto. Tractor is cold blooded but does start. It runs well. Everything works as it should. Has been stored inside. Missing air filter cap. * Contact Myron Miller 574-536-6306.

1844
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2101
Cub Cadet LTX 1040 Garden Tractor
Includes 42" cutting deck and bagging system. Kohler 19 hp gas engine. Contact Myron Miller 574-536-6306

1845
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1846
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1847
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1848
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1849
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1850
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1851
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1852
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1853
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1854
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1855
New Kivel 48'' Skid Steer Pallet Forks
3500 lb capacity. Call Bronson 574-210-3721 

1856
New 7' Pallet Fork Extensions*
Call Bronson 574-210-3721 

1857
12" and 18" Augers*
Contact Myron Miller 574-536-6306.

1858
Side Shooter Bucket
1150 lb capacity 6' wide, good working condition, standard flow hydraulic. Contact Bronson with any questions 574-210-6721

1859
AG National Products Bale Grabber
6' round bale capacity, in good working condition

1860
3 Point Brush Mower
60" wide, 3 point lift and PTO, driven. Contact Bronson with any questions 574-210-3721

1861
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1862
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1863
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1864
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1865
New Skid Steer Rotary Broom
72'' wide working width. Call Bronson 574-210-3721 

1866
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1867
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1868
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. Call Bronson 574-210-3721

1869
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1870
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1871
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1872
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1873
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1874
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1875
3-Point Finish Mower
It is 72" wide and is 540 PTO driven. Contact Myron Miler with any questions 574-536-6306

1876
7' 3-Point Logging Frame
Contact Myron Miler with any questions 574-536-6306

1877
7' Fork Pocket 5 Position Snow Blade
Contact Myron Miler with any questions 574-536-6306

1878
Skid Loader Attachment
Pallet forks, 4" x 48" forks, telehandler style adjustable width. Contact Bronson with any questions 574-210-3721

1879
Laforge Tractor Hitch/Lift Mounts
1LTJDS80 model and 1 LS model in good condition. Contact Myron Miller with any questions 574-536-6306

1880
3-Point Compact Raised Bed Layer
In good condition. Contact Myron Miller with any questions 574-536-6306

1881
Set of 44" Block Forks

1882
Home Built Snow Plow
Made from I-Beam and built to fit pallet forks, 8' wide. Contact Bronson with any questions 574-210-3721

1883
3 Point Chipper*
Merry MAC, PTO driven, in working condition. Contact Bronson with any questions 574-210-3721

1884
3-Point Blade*
8' wide. Contact Bronson with any questions 574-210-3721

1885
2 CY. Skid Steer Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

1886
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1887
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1888
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1889
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1890
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1891
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1892
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1893
40" Sid Steer Spade Bucket*
Contact Bronson with any questions 574-210-3721

1894
70" Root Rake*
Contact Bronson with any questions 574-210-3721

1895
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1896
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1897
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1898
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1899
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1900
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1901
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1902
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1903
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1904
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1905
Cable Winch*
Skid attachment, hydro drive, used to install belt in grain leg, in good condition. Contact Mervin with any questions 260-599-8369

1906
Asphalt Grinder*
Skid attachment, hydrostatic drive, in good condition. 

1907
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1908
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1909
5' 3-Point Box Blade with Ripper Teeth*
Contact Myron Miller with any questions 574-536-6306

1910
9' Boss Skid Steer Mount Snow Blade*
Contact Myron Miller with any questions 574-536-6306

1911
7' Rear Blade*
Reese hitch mount. electric controls. Contact Myron Miller with any questions 574-536-6306

1912
WB Excavator Bucket*
24" wide, last used on a Bobcat. Contact Bronson with any questions 574-210-3721

1913
Skid Loader Grapple Bucket*
78" wide, dual cylinders, standard flow hydraulics. Very little use. Contact Bronson with any questions 574-210-3721

1914
Bush Hog 2512 Mower*
12' wide, rough cut bush hog mower, 3-point attach, 1000 PTO power. Contact Bronson with any questions 574-210-3721

1915
36" Wain Roy Backhoe Bucket*
1/8 yd. unused. Contact Myron Miller with any questions 574-536-6306

1916
42" Excavator Bucket*
3/4 yd. It was last used with a Cat excavator. It has 2 new teeth on the bucket and comes with 7 new teeth and hardware in box. The bucket has a weldable crack on the top. Contact Myron Miller with any questions 574-536-6306
 

1917
Weldable Quick Attach Plate*
Contact Bronson with any questions 574-210-3721

1918
Jun Pulverizer*
In good working condition. 1 owner, very little use, currently set up to mount on CAT 305 excavator. Contact Bronson with any questions 574-210-3721

1919
Jack Hammer*
Needs rebuilt, cones with skid steer mount and currently set up to mount on Bobcat excavator. Contact Bronson with any questions 574-210-3721

1920
6' Bush Hog*
Rough cut mower, 3 point attach, PTO driven. Contact Bronson with any questions 574-210-3721

1921
Allis Chaimers Plank*
2 row planter, 3-point attachment, ground driven, working condition. Contact Bronson with any questions 574-210-3721

1922
Cultivator*
3-point attachment. Contact Bronson with any questions 574-210-3721

1923
John Deere Backhoe Bucket*
24" wide, 5-tooth bucket, fits a 310 or 410 backhoe. Contact Bronson with any questions 574-210-3721

3000
New 40' Shipping Container
High cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

3001
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3002
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3003
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

3004
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

3005
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in color. Call Bronson 574-210-3721 

3006
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Red in color.  Call Bronson 574-210-3721 

3007
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Stainless Steel. Call Bronson 574- 210-3721 

3008
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Stainless Steel. Call Bronson 574-210-3721 

3009
New Steelman Work Bench Toolbox
Model 7ft-18D. It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in Color. Call Bronson 574-210-3721

3010
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3011
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3012
New Self Dumping Hopper
1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3013
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3014
New 24 Piece Ratcheting Tie Downs
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

3015
Rigging Hardware
New shackles in various sizes. Call Bronson 574-210-3721 

3016
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

3017
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

3018
New Hot Water Pressure Washer
4,000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport.  Call Bronson 574-210-3721 
 

3019
Galvalume G Panels 8' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3020
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3021
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3022
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3023
3/8" AR500 Steel Boar Shooting Target with Heart Flapper*
Contact Bronson with any questions 574-210-3721

3024
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3025
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3026
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3027
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3028
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3029
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3030
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3031
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3032
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3033
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3034
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3035
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3036
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3037
Patz 12' Silage Conveyor*
Electric drive 115 or 240 V. Contact Myron Miller with any questions 574-536-6306

3038
6 - 30 Gallon Snyder Tanks*
Unused. Contact Myron Miller with any questions 574-536-6306

3039
Delta Bench Top Drill Press*
Powered by. 5 HP electric motor. It is on a stand with wheeled cart. Includes chuck. It is in very good condition. Contact Myron Miller with any questions 574-536-6306
 

3040
150' of New 1" Pro Poly Underground Gas Line*
Contact Myron with any questions 574-536-6306

3041
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3041A
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3042
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3043
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3044
Quincy Air Compressor*
Powered by a Honda 6X390 Engine with electric start, 30 gallon capacity. Contact Bronson with any question 574-210-3721

3045
Walker 7 Ton Floor Jack*
Trailer/bumper jack, pneumatic power. Works good. Contact Bronson with any questions 574-210-3721

3046
Magnum 4000 EZ Clean Hot Pressure Washer*
3.5 GPM @ 4000 PSI Pump adjustable pressure. Industrial duty engine. Oil/Diesel fired burner, thermostat controlled. Schedule 80 coil with stainless steel housing.Fully welded, powder coated. 10 gallon poly fuel tank. Comes with wand and 30' of hose.1 tire does have a air leak but otherwise the unit is in very good condition. Contact Myron Miller with any questions 574-536-6306

3047
Grain Bin Jacks*
4' x 12', tripod style, 6 total, stakes and 2 ton chain hoists, 6 can build a 36' x 13 ring. In good condition. Contact Mervin with any questions 260-599-8369

3048
Grain Bin Jacks*
New! 4' x 12', tripod style, 4 total, stakes included, 4 can build a 27' x 13 ring. Contact Mervin with any questions 260-599-8369

3049
Cement Forms (Grain Bin)*
2' x 10', 10 pcs. 4' stakes, forms up to 36', in good condition. Contact Mervin with any questions 260-599-8369

3050
Honeyville Auger*
1-9 S 05662, 10" x 15', painted, HD flighting, hydraulic drive, in very good condition. Contact Mervin with any questions 260-599-8369 

3051
Cable Unroller*
36" x 36", like new. Contact Mervin with any questions 260-599-8369

3052
New! Galvanized Cable*
7 x 19 3/8 cable, approx. 4000'

3053
Grain Leg*
1000 BPH, 54' fill height, new belt and vented cups, in good condition. Contact Mervin with any questions 260-599-8369

3054
Big Joe Electric Pallet Jack*
SN: 800084, Model: PDI20, Max height 147", on board battery charger, man cage with harness included, 669 hours. Contact Bronson with any questions 574-210-3721

3055
Pratt and Whitney Co Milling Machine*
Works good. Contact Bronson with any questions 574-210-3721

3056
South Bend Lathe*
Box with extra tooling included. Contact Bronson with any questions 574-210-3721

3057
Carolina Metal Band Saw*
220 single phase power. Contact Myron Miller with any questions 574-536-6306

3058
Ramco Wide Belt Sander*
36" belt 480V 3 phase power. Contact Myron Miller with any questions 574-536-6306

3059
Black and Decker Radial Arm Saw*
Contact Myron Miller with any questions 574-536-6306

3075
Stihl MS170 Chainsaw
Lightly used and in good condition. Contact Bronson with any questions 574-210-3721

3060
4 Chemical Tanks*
Contact Myron Miller with any questions 574-536-6306

3061
Bartell Power Trowel*
36" Diameter, powered by a 5.5 hp Honda 6X160 engine. Works good. Contact Bronson with any questions 574-210-3721

3062
Miller Sturdi-Saw Concrete Floor Saw*
Powered by a Honda GX390 13 hp engine. Works good. Contact Bronson with any questions 574-210-3721

3063
Mikasa Sangyo Plate Compactor*
Powered by a Honda GX160 engine. Good working condition. Contact Bronson with any questions 574-210-3721

3064
Bartell Plate Compactor*
Powered by a Honda GX160 engine, in good working condition. Contact Bronson with any questions 574-210-3721

3065
Grain Tank*
3 ton capacity, free standing, leg kit and cover are included. Contact Bronson with any questions 574-210-3721

3066
Cement Forms*
18" x 48" 4 pc. fan pad cement forms. Contact Mervin with any questions 260-599-8369

3067
Honda Power Post Hole Auger*
28" Auger. Runs, throttle cable and stop switch need repaired as they are both broken from the handle. Contact Myron with any questions 574-536-6306
 

3068
Roll Case*
45" long 30" rollers, powered by an electric motor 220V. Contact Myron with any questions 574-536-6306

3069
Roll Case*
11' long 30" rollers, hydraulic powered. Contact Myron with any questions 574-536-6306

3070
Casadei EMA KS 1200 Table Saw*
53" cutting capacity, 10" blade 3 phase 220 V. Contact Myron with any questions 574-536-6306

3071
Tapco Port-O-Slitter*
In good condition. Contact Myron with any questions 574-536-6306

3072
12' Aluminum Scaffold with Ladder Jacks*
In good condition. Contact Myron with any questions 574-536-6306

3073
10.5' Tapco Mark 1 Series Metal Brake*
In good condition. Contact Myron with any questions 574-536-6306

3074
1933 Westinghouse Shop Fan*
In good working condition. Contact Bronson with any questions 574-210-3721

3076
Mile Marker Winch*
12V, working condition, includes remote control, weight rating unknown. Contact Bronson with any questions 574-210-3721

3077
Dewalt Cap/Staple Gun*
Model: DWSL18 CAP, Pneumatic power, new condition. Contact Bronson with any questions 574-210-3721

3078
Tractor Dual Tires*
Clamp on style, size 18.4-38. Contact Bronson with any questions 574-210-3721

3079
Stainless Steel Hog Feeder*
Contact Bronson with any questions 574-210-3721

3080
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3081
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3082
Set of Axles*
5-lug, with brakes and leaf springs. Contact Bronson with any questions 574-210-3721

3083
Castors*
10" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3084
Castors*
8" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3085
Castors*
6" diameter, 8 pieces. Contact Bronson with any questions 574-210-3721

3086
Lincoln SP-125 Plus Mig Welder*
110 powered includes tank. Good working unit in great condition. Contact Myron Miller with any questions 574-536-6306

3087
Small Pallet Racking*
(4) 5' x 48s" legs (18) 6' crossbars (3) 8' crossbars with approximately 48 support bars 48". Contact Myron Miller with any questions 574-536-6306

3088
Stackable Plastic Crates*
84 crates. 23" long x 15" wide x 10" tall. Contact Myron Miller with any questions 574-536-6306

3089
Folding Wire Baskets*
9 total. 32" long 18" wide 16" deep. Contact Myron Miller with any questions 574-536-6306

3090
Lot Feed Tote Bags*
25 bags approximately 40" x 40" x 40" used. Contact Myron Miller with any questions 574-536-6306

3091
Cooks Cat Claw Band Sharpener*
Lineshaft ready, includes 4 cams. Good working condition. Contact Myron Miller with any questions 574-536-6306

3092
Tennant 240 EH Floor Sweeper*
Battery operated, does run and operate, sells with charger. Contact Bronson with any questions 574-210-3721

3093
Curb Tec CT3000 Concrete Curb Machine*
In good working condition, powered by a Kohler engine, includes 4 different curb molds, 1 owner machine. Contact Bronson with any questions 574-210-3721

3094
Hobart ARC Welder*
PTO driven, mounted on trailer. Contact Bronson with any questions 574-210-3721

3095
Air Compressor*
Mounted on pallet, powered by 3.5 hp Honda engine. Contact Bronson with any questions 574-210-3721

3096
Crane/Excavator Mats*
Contact Bronson with any questions 574-210-3721

3097
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3098
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3099
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3100
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3101
Misc. Parts*
Belts, brake pads, head lights, etc. Contact Bronson with any questions 574-210-3721

3102
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3103
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3104
Stainless Steel Hog Feeders*
Set of 2, 70" wide. Contact Bronson with any questions 574-210-3721

3105
Livestock Gates*
9 gates with waterers, approximately 9' wide. Contact Bronson with any questions 574-210-3721

3106
Boxes of Drill Bits*
Black and Decker, valve resurfacing machine. Contact Bronson with any questions 574-210-3721

3107
Delta Metal Cutting Bandsaw*
4"x6" bed. Works good. Contact Myron Miller with any questions 574-536-6306

3108
Packard Variable Speed Floor Mount Drill Press*
Works good. Contact Myron Miller with any questions 574-536-6306

3109
Sears Craftsman Combo Sander*
4" belt 6" disc sander. Works good. Contact Myron Miller with any questions 574-536-6306

3110
Fuel Tank*
4', 35" in diameter. Contact Myron Miller with any questions 574-536-6306

3111
Self Catching Pearson Headgate*
Contact Myron Miller with any questions 574-536-6306

3112
Antique Hand Powered Drill Press*
Contact Myron Miller with any questions 574-536-6306

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Bright Star Equipment Auction Day 2 Ring #1

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
11751 CR 12
Middlebury, IN 46540
Sale Dates and Times
Thursday Apr 6, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid day of auction for onsite bidders and within 7 days for online purchasers. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within seven (7) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Bright Star Equipment Auction * All items sell absolute* No Minimums * No Reserves * Consign now for free advertising * Items wanted include but not limited to Skid Loaders - Excavating Equipment - Contractors Equipment - Rolling Stock - Semi Trucks - Dump Trucks - Trailers - Attachments Much Much More. Call Bronson 574.210.3721 or Tim 269-986-5693 to consign early for maximum free advertising.

00
Information Lot
Looking for quality consignments of construction, excavating, forestry, and other heavy equipment. We will be taking consignments until Monday, April 3rd. Free loadout day of the auction until 4 PM. Office will be closed on Friday, April 7, due to the Good Friday holiday. Free loadout Saturday, April 8, from 8 am to 1 PM, and until April 21st M-F from 8 AM – 4 PM. After that by appointment and for a $25 per lot loading fee. Any items not picked up in 30 days become the property of the auction company.

1500
2004 Ford Ranger Pickup Truck
Year: 2004
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 195,567
Body Type: Extended cab
Trim Level: XLT
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); SOHC
Fuel Type: Gasoline
Horsepower: 203-210HP
Transmission: Automatic
VIN #: 1FTZR45E14PA25396

Features and Notes: power windows and lock, hitch, rebuilt title. Contact Bronson with any questions 574-210-3721

1475
1996 Ford F-450 Pickup Truck, VIN # 1FDLF47GXTEB77700 Bucket Truck*
Year: 1996
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage:274432
Plate:
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x2
Engine Type: V8, 7.5L (460 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic
VIN #: 1FDLF47GXTEB77700

Features and Notes: Starts but runs rough. Contact Tim Graber 269-986-5693.

1
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

1501
1998 Dodge Ram Pickup Pickup Truck
Year: 1998
Make: Dodge
Model: Ram Pickup
Vehicle Type: Pickup Truck
Mileage: 248,773
Body Type: Extended cab
Trim Level: Base
Drive Line: 4WD
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1B7KF2366WJ212732

Features and Notes: 4x4, it has 24 V Cummins Diesel, extended cab with 3rd and 4th door, power interior, trailer brakes, boss plow mount, Rhino lined bed. Contact Bronson with any questions 574-210-3721

2
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1502
2003 Honda Civic
Mileage: 283,895
Body Type: 4 Door Sedan
Trim Level: EX
Drive Line: FWD
Engine Type: L4, 1.7L; VTEC-E
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1HGES26823L025270

Features and Notes: It is a 4-door that seats 5, has power windows, locks, mirrors and has a sunroof, It does start and run. Sells with mechanics lien paperwork. Call Bronson 574-210-3721  

1675
1969 Allis Chalmers 180
Powered by a 4.3 liter 6 cylinder gasoline engine. Rated for 65HP at 2000 RPM backed by an 8-speed partial powershift transmission. Right rear hub plate and bolts bolts were just replaced. 18.4-28 tires with 16" rims. Tires are at about 50%. Meter reads 6653 hours. Very well maintained, good running, clean machine. Contact Myron Miller 574-536-6306.

1676
1952 Ferguson Tractor
Model: T0 30
SN: 82502
Meter reads: unknown
Engine: Continental 2.1L 4 cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: Rear wheel
Rear PTO: yes
3 Point hitch: yes

Features and Notes: new headlights
 

1503
2004 Ford F-450 Pickup Truck, VIN # 1FDXF47P04ED48568
Year: 2004
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage: 227,971 miles
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 6.0L (366 CID); Turbo
Fuel Type: Diesel
Horsepower: 325HP
Transmission: Automatic
VIN #: 1FDXF47P04ED48568

Features and Notes: 4 wheel drive, brake controller, Leather interior, runs and drives, 8' x 8 1/2' aluminum flat bed, gooseneck hitch

1503
2002 Ford F-350 Pickup Truck
Year: 2002
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage: 375,112 miles
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic
VIN #: 1FTSW31F92ED18412

Features and Notes: Engine come with performance chip. Has leather interior, long bed, and gooseneck hitch, has title.  Contact Bronson with any questions 574-210-3721

1504
2000 Ford F-550 Truck, VIN # 1FDAW57F1YEA21072
Year: 2000
Make: Ford
Model: F-550
Vehicle Type: Truck
Mileage: 145,505 miles
Body Type: Crew Cab
Drive Line: 4x4
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1FDAW57F1YEA21072

Features and Notes: Engine light is on, starts with jump pack and starting fluid, 8' x 9' dump box

1677
1946 McCormick Farmall Tractor
Model: M
SN: 121381X1
Meter reads: unknown
Engine: 4.1L 4 cylinder
Fuel type: Gasoline
Transmission type: 5 speed sliding gear
Drive: 2 WD
Rear PTO: yes
3 Point hitch: no

Features and Notes: starts and runs but loses power when put into gear
 

1504
2000 Chevrolet Express Van
Year: 2000
Make: Chevrolet
Model: Express
Vehicle Type: Van
Mileage: 215,211 miles
Body Type: 3 Door Van; Sport
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNGG25RXY1155276

Features and Notes: has a brand new passenger rear tire, in running condition. Contact Myron with any questions 574-536-6306

1505
2013 Ford F-150 Pickup Truck
Year: 2013
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 151,715 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XL; Limited; Platinum; XLT; Lariat; King Ranch; FX4
Drive Line: 4WD
Engine Type: Remanufactured Jasper Engine (installed at 118,000 miles)
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1FTFW1ET7DFA13994

Features and Notes: Has leather heated interior, trailer brakes, navigation and bluetooth compatible. Its full digital display. Comes with a tonneau cover for the short bed. Truck has all LED lights. Jasper Engine is still under warranty. Paint does have runs in it. Newer tires.***rebuilt title Contact Bronson with any questions 574-210-3721

1678
1940 Ford Tractor
Model: 9N
SN: 9N15314
Engine: 4-cylinder, 26 hp
Fuel type: gas
Transmission type: 3-speed with reverse
Drive: 2-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: it has been converted to 12 volt, Carburetor does leak when sitting for extended time, brakes do need work, studded front tires, runs and operates. Contact Bronson with any questions 574-210-3721
 

1679
1942 Allis Chalmers Tractor
Model: B
SN: B58938
Engine: 1.9L 4-cylinder
Fuel type: Gasoline
Transmission type: Unsynchronized gear, 3 forward 1 reverse 
Drive: 2 wheel
Rear PTO: no
3 Point hitch: no

Features and Notes: full restored 8 years ago, tires are in very good condition, electric start, has lights, 6V new water pump, it has rare flared fenders. The alternator was just completely rebuilt along with a new battery and coil. Contact Myron with any questions 574-536-6306
 

1506
2006 Ford F-150 Pickup Truck
Year: 2006
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 267,062 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XLT; Lariat; King Ranch
Drive Line: RWD
Engine Type: V8, 5.4L; FFV
Fuel Type: Gasoline/E85
Transmission: Automatic
VIN #: 1FTPW12V26KD63618

Features and Notes: seats 6, short bed. Its starts and runs, idles rough. Contact Bronson with any questions 574-210-3721

1507
2005 Chevrolet TrailBlazer EXT Multipurpose Vehicle
Year: 2005
Make: Chevrolet
Model: TrailBlazer EXT
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 201,773 miles
Body Type: 4 Door Wagon
Trim Level: LS; LT
Drive Line: 4WD
Engine Type: V8, 5.3L; SFI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNET16M556190628

Features and Notes: Has 3 row seating and all powered heated leather interior. Dual climate controls. It starts and runs. The check engine light is on and power steering is not working. Contact Bronson with any questions 574-210-3721

1680
1986 Massey Ferguson Tractor
Model: 1030D
SN: 41344
Meter reads: 1184 hours
Engine: 1.4 liter 3-cylinder 26hp
Fuel type: Diesel
Transmission type: Manual
Drive: 4-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: Front end loader, four gears, plus reverse in three ranges (L-M-H), engine was fully rebuilt 2 years ago, good running well maintained machine. Contact Myron Miller with any questions 574-536-6306
 

1550
1995 RS Open Top Chip Trailer
VIN: 1R217D2A5S2001158, 53' long, last inspected 06/2021, good cover. Contact Bronson with any questions 574-210-3721

1681
1950 Ford Tractor
Model: 8N
SN: 253708
Engine: 2.0L 4-cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 4 forward and 1 reverse gears, converted to 12V, lights work, new clutch and alternator, in good running condition. Contact Myron Miller with any questions 574-536-6306
 

1551
1978 Fruehauf Open Top Chip Trailer
VIN: MEZ605050, 53' long, last inspected 07/2022, good cover. Contact Bronson with any questions 574-210-6721

1682
Massey Ferguson
Model: 1220
SN: C24206
Meter reads: 558
Engine: Iseki E3112 3-cylinder
Fuel type: Diesel
Transmission type: Manual
Drive: 4WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 6 forward and 2 reverse gears. Includes 6' front mount snow blade. Front and rear light bars, original lights and shift knob are included. In very good condition. Contact Myron Miller with any questions 574-236-6306
 

2029
New Chain and Binder Sets
5 sets of Ratchets rated at 5'400 lbs, and 10 5/16" chains 20' long.  Call Bronson 574-210-3721 

1552
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492056, 53' long, last inspected 04/2020, not currently road worthy, missing back door. Contact Bronson with any questions 574-210-6721

1683
John Deere A Tractor
Engine: 5.1 Liter 2 cylinder
Fuel type: Gas
Transmission type: Manual with slide clutch
Drive: RWD
Rear PTO: yes
3 Point hitch: no

Features and Notes: 4 speed unsychronized gear, does not run, needs work. Contact Myron Miller with any questions 574-536-6306
 

1553
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492090, 53' long, last inspected 04/2019, not currently road worthy

1684
1947 Farmall M Tractor*
SN: 137010X1
Engine: 4.1 Cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch:  no

Features and Notes: New starter. 5 speed sliding gear. Runs and operates however the hydraulic needs work and it has a slight gas leak if it is not shut off. Contact Myron Miller with any questions 574-536-6306
 

1554
1976 Timpte D31 Walking Floor Trailer
VIN:D31BN68850,  The live floor works. It has new tarp and new back doors. The trailer does need some work. It works off of wet kit. Contact Bronson with any questions 574-210-3721

1685
2017 Kubota L4701D Tractor*
SN: 61915
Meter reads: 1,440 hours
Engine: 4- cylinder 2.4 liter Kubota 47hp
Fuel type: Diesel
Transmission type: Hydrostatic
Drive: 4WD
Rear PTO: yes, 540
3 Point hitch: yes

Features and Notes: It has a 72" front loader bucket wit quick attach, rear back hoe attachment with 12" x 18", and 24" buckets, D.P.F. has been deleted, runs and drives good. Contact Bronson with any questions 574-210-3721
 

1725
AG National Products Bale Wrapper
SN: 41087, with skid loader mount, wraps 4' x 5' round bales, standard flow hydraulics. Contact Bronson with any questions 574-210-6721

1555
2016 Team Spirit Gooseneck Trailer
VIN: 1T9LD2629GE661409
Tandem axle with working lights and brakes, was converted from bumper pull to gooseneck and used as an insulation trailer. Contact Myron Miller with any questions 574-536-6306

1726
Aitchison No Till Grain Drill
SN: 3803, with double disk opener retro fil, 8' wide, 16 row, ground driven, foam feed rolls. Contact Bronson with any questions 574-210-6721

1575
2003 PJ Gooseneck Trailer
VIN: 4P5GN262731053884, 8' wide x 25' long with 5' dove tail and 4' rams, Dual tandem axles rated at 10000 lbs each, 20000 GVWR. Has good decking and needs tires. Contact Bronson with any questions 574-210-3721

1727
Jay-Lor A50 Feed Mixer
SN: 018033, Powered by a Briggs and Stratton 13 hp Vangaurd engine with an electric start. It's self propelled with scale. 50' cubic foot capacity. It runs and operates. Contact Bronson with any questions 574-210-3721

1576
1984 Jayco 28' 5th Wheel Camper
VIN: MVIN168721IND
full kitchen, dinette sofa, front bedroom, bathroom. Does show signs of roof leaking, awning. Contact Bronson with any questions 574-210-3721

1577
1994 Wells Cargo Enclosed Trailer
Year: 1994
Make: Wells Cargo
Model: TW101-V / 2-Place MC122-7 TE
Vehicle Type: Trailer
Body Type: Aluminum
VIN #: 1WC200E11R1064126

Features and Notes: 6' x 12', has swinging rear door, new axle, spare tire, shelving, adjustable height, 2 coupler pulls with 2 5/16" ball. Contact Bronson with any questions 574-210-3721

1728
John Deere 930 Moco Impeller Haybine
Uses 1000PTO with tractor hydraulics, missing PTO link, in good condition. Contact Myron with any question 574-536-6306

1578
Dump Trailer
Manure spreader converted to sawdust trailer. Pulls with pin hitch. Trailer has Tandem axle, tarp top, good cover. Hydraulic powered dump. 7'W x 16'L. Does not come with a title. Contact Bronson with any questions 574-210-3721

1729
Hesston 4900 Hay Baler
SN: BB49-00738, 1000 PTO driven with monitor with applicator, produces 4.4 hay bales. Contact Bronson with any questions 574-210-3721

1579
2010 Trailer
VIN: 4YMLT122XAG090305, 6' x 12 inside width, Tandem 3500 lb axles. includes LED lights, brakes, adjustable coupler. 7000 GVWR, swing rear doors, 2 5/16 ball, has title. Contact Bronson with any questions 574-210-3721

1730
John Deere 7000 Planter
13'wide, 6 row, good working condition. Just reconditioned by Shipps Precision. Has new parts and is field ready. Contact Bronson with any questions 574-210-3721

1580
2008 Car Mate Trailer
Year: 2008
Make: Car Mate Trailers
GVWR: 2990
VIN #: 5A34510S28L003350

Features and Notes: 5' x 10' with 4' drive on ramp. Has 5-lug axle, pulls with 2" ball, and has LED lights. Trailer is in good condition. Contact Bronson with any questions 574-210-3721

1731
Esch 5512 No Till Drill
In good condition and field ready. Extra parts included, storage cover included. Contact Bronson with any questions 574-210-3721

1581
8x16 Coach Craft Aluminum Trailer
VIN: 1C9EU12212B746361
tandem 5 lug 3500 lb torsion axles, pulls with 2 5/16" ball, ramp style rear door and curbside, 7' inside height, front jack wheel is broken, brakes need to be hooked up, in good condition. No title, comes with a bill of sale only. Contact Myron Miller with any questions 574-536-6306

1732
Rain Bow Irrigation Systems
Traveling irrigation unit, 2 hoses at approx. 600'. Does have small leaks. Powered by Honda engine and turbine. Contact Bronson with any questions 574-210-3721

1650
16' Ebbtide Boat
Engine is incomplete and the interior needs redone, bill of sale only. Contact Myron Miller 574-536-6306

1733
Case IH Crumbler
24' wide, product ID number: JFH0034045, only used 1 season. Contact Bronson with any questions 574-210-3721

1651
820 Aqua Patio Pontoon
13 person, comes with 35hp Johnson and has 24' toons, would make a good project boat, sells with Bill of Sale only. Contact Myron with any questions 574-536-6306

1734
Oliver 546 Plow
5-bottom plow, in good working condition. Contact Bronson with any questions 574-210-3721

1735
Art's -Way PM 30 Tub Grinder Mixer*
SN: AWPM30950413
Model: FPS-PM-0006
150 Bushel capacity
Includes digital scale and adapters to run off single remote hydraulic. Contact Bronson with any questions 574-210-3721

1736
Grain Cart*
5' wide x 7' long, PTO operated with auger and tarp cover. Contact Bronson with any questions 574-210-3721

1737
Gravity Wagon*
6' wide x 10' long, with new cover. Contact Bronson with any questions 574-210-3721

1738
20' Field Cultivator*
12' main with 4' bat wings. The hydraulics work but the hoses will need to be replaced. One tire is missing. Contact Myron Miller with any questions 574-536-6306

1739
8' John Deere Pull Behind Seeder*
Model: LF Serial: 18218. Contact Myron Miller with any questions 574-536-6306
 

1740
White Chisel Plow*
7 row. Contact Bronson with any questions 574-210-3721

1741
Plow Packer*
8' wide. Contact Bronson with any questions 574-210-3721

1750
1995 Froedge 450 Deduster
SN: 25050, Model: 121BD 18BC, electric drive, wired for 220V 3 phase, needs new brushes, up to 8" wide, up to 6" thick and up to 8' in length capacity, in good condition. Contact Myron Nissley with any questions 574-536-2481

1751
Smart Single Head Notcher
Single head, 20 hp electric drive, wired for 220V 3 phase, manual feed, 72" capacity, 9" wide cutter head, indexable teeth, electric drive board kicker, ready for production. Contact Myron Nissley with any questions 574-536-2481

1752
Heartland Chop Saw
18" blade, includes adjustable board stops, mounted to 30" wide x 70" long x 36" high steel bench, 10 hp electric motor on head, wired for 220V 3 phase. Contact Myron Nissley with any questions 574-536-2481

1753
Belt Conveyor
12" x 11' conveyor with 11" belt, 3/4 hp electric motor. Contact Myron Nissley with any questions 574-536-2481

1754
Pacific Trail Yard Saw
Powered by a Honda GX630 electric start engine. It has a 6' cutting capacity and comes with 5 extra blades.This unit is in like new condition and was used to cut only 2 loads of bundles. In working condition. Contact Myron Miller with any questions 574-536-6306
 

1775
120 KW Natural Gas Genset
Powered by a 454 big block engine fully rebuilt with all stainless parts only 2000 hours ago. The generator is a Marelli with a total of 2000 hours. It is a 480V system with an electronic governor set at 1800 RPM. Great running well maintained machine. Contact Myron Miller 574-536-6306

 

1776
Miller Big Blue 402D Welder/Generator
SN: LB106031, 698 hours, Duetz Diesel Engine, TIG/Stick/MIG welder, single and 3 phase generator. In excellent working condition. Contact Bronson with any questions 574-210-3721

1777
Kohler 125 Genset
SN: 3366GMGH0036, Model: 125REOZJG, 60 Hz., 3 phase, 128 kw., 3 pole 250 amp and 150 amp breaker manufactured 7/16/19. 4.5L John Deere diesel engine Model: 4045HF285, SN: PE4045N022679, 1800 rpm meter reads, .6 hour, started 12 times, 6" x 12" x 6" temporary gas tank, 106" x 44" x 60" overall size, needs new battery, starts without hesitation. Contact Dan with any questions 574-612-0074

1778
Empire Genset
SN: 371-122, Model: 550DGW-8E, 6-cylinder Perkins diesel engine, 3121 hours, 50kw, 120/208 V, starts and runs good, control box will need some work. Contact Bronson with any questions 574-210-3721

1779
Kohler Genset
SN:448445-C2, Model: C605, International V8 natural gas powered, 493 hours, 277/4880 V, 3-phase, 88kw, generator works, starts and runs as it should. Contact Bronson with any questions 574-210-3721

1780
John Deere Power Unit
SN: RG6619A062541, With attached corn chopper mounted on heavy duty trailer with skid loader tires. Meter reads 558 hours, has a clutch, 6-cylinder diesel engine. Contact Bronson with any questions 574-210-3721

1781
Genset 2-Cylinder Diesel with 8 KW Generator
Shows 9843 hours, Murphy switch may need replaced but otherwise works well. Contact Bronson with any questions 574-210-3721

1782
Kohler 14KW Propane Power Unit*
4 110V outlets and 1 125/250V 50A outlet.Good working unit. Contact Myron Miller with any questions 574-536-6306

1783
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1784
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1800
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1801
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1802
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1803
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1804
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1805
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1806
New Skid Steer Rock Grapple Bucket
72'' working width, pictures coming soon.  Call Bronson 574-210-3721 

1807
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1808
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1809
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1810
New Pallet Fork Extensions 10
New 10' Pallet fork extensions rated for 6600 lbs.  Call Bronson 574-210-3721 

2000
New 40' Shipping Container
New 40', high cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

1811
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2001
40' Shipping Container Tiny House
It is fully wired and insulated and has rear patio doors behind the shipping container doors that can be removed and have a nice deck installed, It has 2 bedrooms, that could be an office, It has a bathroom and office that are not plumbed.  It is insulated, ventilated, and has double hung windows and a slanted roof.  Call Bronson 574-210-3721 

1812
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2002
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1813
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2003
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1814
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2004
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1815
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2005
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1816
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2006
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

1817
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.6.

2007
New Bastone 2 Portable Restroom Stalls
The Bastone, 2 private stalls, portable restroom features a toilet, a sink, a light and an extractor and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. 
  • Dimensions (ft): L4.3*W7*H7.7 
  • 1/2" female inlet ports for hot & cold water
  • 3" black water/waste exhaust flexible hose (easily slide your 3" PVC pipe onto flex fitting for waste)
  • 1" PVC water outlet exhaust port (for sink water)
  • Bowl Shape: elongated
  • Mount type: wall mounted
  • Flush volume: 1.6 gpf
  • Condition: New
  • Call Bronson 574-210-3721

1818
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2008
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1819
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2009
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1820
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2010
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1821
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2011
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1822
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2012
New Container Shelter
20' X 20' X 6'6'' with 5 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1823
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2013
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1824
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width. In brand new condition. Contact Myron Miller 574-536-6306.

2014
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1825
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2015
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1826
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2016
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1827
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9".In brand new condition. Contact Myron Miller 574-536-6306.

2017
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1828
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9". In brand new condition. Contact Myron Miller 574-536-6306.

2018
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1829
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2019
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1830
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2020
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1831
2022 Wolverine Concrete Breaker
Model 750 In brand new condition. Contact Myron Miller 574-536-6306.

2021
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1832
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2022
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1833
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2023
New Steelman Work Bench Toolbox

Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Blue in color

1834
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2024
New Steelman Work Bench Toolbox
Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Red in Color

1835
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2025
New Steelman Work Bench Toolbox
Model 7FT-35D. It has 35 drawers and 1 cabinet, 3 rail sliding drawers, anti slip mats, 110 lb rating per drawer. Call Bronson 574-210-3721

1836
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2026
New Highway Safety Cones
Lot of 250 safety cones in new condition. 

1837
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2027
New 24 Piece Ratcheting Tie Downs*
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

1838
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2028
New Chain and Binder Sets
5 sets of Ratchets rated at 9'200 lbs, and 10 3/8" chains 20' long.  Call Bronson 574-210-3721 

1839
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2030
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

1840
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2031
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

1841
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2032
New 12'000 lb Electric Winch
12 volt, ready to install. Call Bronson 574-210-3721 

1842
2022 Wolverine Vibratory Roller
60" with a stimulation force of 3.3T. In brand new condition. Contact Myron Miller 574-536-6306.

2033
New 28'' x 90'' KC Steel Work Bench*
Call Bronson 574-210-3721 

1843
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2100
Kubota B6000E Tractor
Powered by a water cooled 4cycle 2cylinder diesel rated at 12.5HP at 2700rpm. 6 forward gears and 2 reverse. 3 point with pto. Tractor is cold blooded but does start. It runs well. Everything works as it should. Has been stored inside. Missing air filter cap. * Contact Myron Miller 574-536-6306.

1844
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2101
Cub Cadet LTX 1040 Garden Tractor
Includes 42" cutting deck and bagging system. Kohler 19 hp gas engine. Contact Myron Miller 574-536-6306

1845
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1846
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1847
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1848
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1849
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1850
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1851
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1852
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1853
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1854
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1855
New Kivel 48'' Skid Steer Pallet Forks
3500 lb capacity. Call Bronson 574-210-3721 

1856
New 7' Pallet Fork Extensions*
Call Bronson 574-210-3721 

1857
12" and 18" Augers*
Contact Myron Miller 574-536-6306.

1858
Side Shooter Bucket
1150 lb capacity 6' wide, good working condition, standard flow hydraulic. Contact Bronson with any questions 574-210-6721

1859
AG National Products Bale Grabber
6' round bale capacity, in good working condition

1860
3 Point Brush Mower
60" wide, 3 point lift and PTO, driven. Contact Bronson with any questions 574-210-3721

1861
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1862
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1863
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1864
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1865
New Skid Steer Rotary Broom
72'' wide working width. Call Bronson 574-210-3721 

1866
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1867
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1868
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. Call Bronson 574-210-3721

1869
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1870
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1871
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1872
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1873
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1874
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1875
3-Point Finish Mower
It is 72" wide and is 540 PTO driven. Contact Myron Miler with any questions 574-536-6306

1876
7' 3-Point Logging Frame
Contact Myron Miler with any questions 574-536-6306

1877
7' Fork Pocket 5 Position Snow Blade
Contact Myron Miler with any questions 574-536-6306

1878
Skid Loader Attachment
Pallet forks, 4" x 48" forks, telehandler style adjustable width. Contact Bronson with any questions 574-210-3721

1879
Laforge Tractor Hitch/Lift Mounts
1LTJDS80 model and 1 LS model in good condition. Contact Myron Miller with any questions 574-536-6306

1880
3-Point Compact Raised Bed Layer
In good condition. Contact Myron Miller with any questions 574-536-6306

1881
Set of 44" Block Forks

1882
Home Built Snow Plow
Made from I-Beam and built to fit pallet forks, 8' wide. Contact Bronson with any questions 574-210-3721

1883
3 Point Chipper*
Merry MAC, PTO driven, in working condition. Contact Bronson with any questions 574-210-3721

1884
3-Point Blade*
8' wide. Contact Bronson with any questions 574-210-3721

1885
2 CY. Skid Steer Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

1886
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1887
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1888
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1889
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1890
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1891
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1892
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1893
40" Sid Steer Spade Bucket*
Contact Bronson with any questions 574-210-3721

1894
70" Root Rake*
Contact Bronson with any questions 574-210-3721

1895
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1896
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1897
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1898
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1899
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1900
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1901
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1902
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1903
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1904
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1905
Cable Winch*
Skid attachment, hydro drive, used to install belt in grain leg, in good condition. Contact Mervin with any questions 260-599-8369

1906
Asphalt Grinder*
Skid attachment, hydrostatic drive, in good condition. 

1907
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1908
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1909
5' 3-Point Box Blade with Ripper Teeth*
Contact Myron Miller with any questions 574-536-6306

1910
9' Boss Skid Steer Mount Snow Blade*
Contact Myron Miller with any questions 574-536-6306

1911
7' Rear Blade*
Reese hitch mount. electric controls. Contact Myron Miller with any questions 574-536-6306

1912
WB Excavator Bucket*
24" wide, last used on a Bobcat. Contact Bronson with any questions 574-210-3721

1913
Skid Loader Grapple Bucket*
78" wide, dual cylinders, standard flow hydraulics. Very little use. Contact Bronson with any questions 574-210-3721

1914
Bush Hog 2512 Mower*
12' wide, rough cut bush hog mower, 3-point attach, 1000 PTO power. Contact Bronson with any questions 574-210-3721

1915
36" Wain Roy Backhoe Bucket*
1/8 yd. unused. Contact Myron Miller with any questions 574-536-6306

1916
42" Excavator Bucket*
3/4 yd. It was last used with a Cat excavator. It has 2 new teeth on the bucket and comes with 7 new teeth and hardware in box. The bucket has a weldable crack on the top. Contact Myron Miller with any questions 574-536-6306
 

1917
Weldable Quick Attach Plate*
Contact Bronson with any questions 574-210-3721

1918
Jun Pulverizer*
In good working condition. 1 owner, very little use, currently set up to mount on CAT 305 excavator. Contact Bronson with any questions 574-210-3721

1919
Jack Hammer*
Needs rebuilt, cones with skid steer mount and currently set up to mount on Bobcat excavator. Contact Bronson with any questions 574-210-3721

1920
6' Bush Hog*
Rough cut mower, 3 point attach, PTO driven. Contact Bronson with any questions 574-210-3721

1921
Allis Chaimers Plank*
2 row planter, 3-point attachment, ground driven, working condition. Contact Bronson with any questions 574-210-3721

1922
Cultivator*
3-point attachment. Contact Bronson with any questions 574-210-3721

1923
John Deere Backhoe Bucket*
24" wide, 5-tooth bucket, fits a 310 or 410 backhoe. Contact Bronson with any questions 574-210-3721

3000
New 40' Shipping Container
High cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

3001
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3002
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3003
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

3004
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

3005
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in color. Call Bronson 574-210-3721 

3006
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Red in color.  Call Bronson 574-210-3721 

3007
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Stainless Steel. Call Bronson 574- 210-3721 

3008
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Stainless Steel. Call Bronson 574-210-3721 

3009
New Steelman Work Bench Toolbox
Model 7ft-18D. It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in Color. Call Bronson 574-210-3721

3010
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3011
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3012
New Self Dumping Hopper
1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3013
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3014
New 24 Piece Ratcheting Tie Downs
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

3015
Rigging Hardware
New shackles in various sizes. Call Bronson 574-210-3721 

3016
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

3017
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

3018
New Hot Water Pressure Washer
4,000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport.  Call Bronson 574-210-3721 
 

3019
Galvalume G Panels 8' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3020
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3021
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3022
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3023
3/8" AR500 Steel Boar Shooting Target with Heart Flapper*
Contact Bronson with any questions 574-210-3721

3024
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3025
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3026
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3027
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3028
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3029
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3030
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3031
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3032
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3033
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3034
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3035
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3036
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3037
Patz 12' Silage Conveyor*
Electric drive 115 or 240 V. Contact Myron Miller with any questions 574-536-6306

3038
6 - 30 Gallon Snyder Tanks*
Unused. Contact Myron Miller with any questions 574-536-6306

3039
Delta Bench Top Drill Press*
Powered by. 5 HP electric motor. It is on a stand with wheeled cart. Includes chuck. It is in very good condition. Contact Myron Miller with any questions 574-536-6306
 

3040
150' of New 1" Pro Poly Underground Gas Line*
Contact Myron with any questions 574-536-6306

3041
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3041A
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3042
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3043
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3044
Quincy Air Compressor*
Powered by a Honda 6X390 Engine with electric start, 30 gallon capacity. Contact Bronson with any question 574-210-3721

3045
Walker 7 Ton Floor Jack*
Trailer/bumper jack, pneumatic power. Works good. Contact Bronson with any questions 574-210-3721

3046
Magnum 4000 EZ Clean Hot Pressure Washer*
3.5 GPM @ 4000 PSI Pump adjustable pressure. Industrial duty engine. Oil/Diesel fired burner, thermostat controlled. Schedule 80 coil with stainless steel housing.Fully welded, powder coated. 10 gallon poly fuel tank. Comes with wand and 30' of hose.1 tire does have a air leak but otherwise the unit is in very good condition. Contact Myron Miller with any questions 574-536-6306

3047
Grain Bin Jacks*
4' x 12', tripod style, 6 total, stakes and 2 ton chain hoists, 6 can build a 36' x 13 ring. In good condition. Contact Mervin with any questions 260-599-8369

3048
Grain Bin Jacks*
New! 4' x 12', tripod style, 4 total, stakes included, 4 can build a 27' x 13 ring. Contact Mervin with any questions 260-599-8369

3049
Cement Forms (Grain Bin)*
2' x 10', 10 pcs. 4' stakes, forms up to 36', in good condition. Contact Mervin with any questions 260-599-8369

3050
Honeyville Auger*
1-9 S 05662, 10" x 15', painted, HD flighting, hydraulic drive, in very good condition. Contact Mervin with any questions 260-599-8369 

3051
Cable Unroller*
36" x 36", like new. Contact Mervin with any questions 260-599-8369

3052
New! Galvanized Cable*
7 x 19 3/8 cable, approx. 4000'

3053
Grain Leg*
1000 BPH, 54' fill height, new belt and vented cups, in good condition. Contact Mervin with any questions 260-599-8369

3054
Big Joe Electric Pallet Jack*
SN: 800084, Model: PDI20, Max height 147", on board battery charger, man cage with harness included, 669 hours. Contact Bronson with any questions 574-210-3721

3055
Pratt and Whitney Co Milling Machine*
Works good. Contact Bronson with any questions 574-210-3721

3056
South Bend Lathe*
Box with extra tooling included. Contact Bronson with any questions 574-210-3721

3057
Carolina Metal Band Saw*
220 single phase power. Contact Myron Miller with any questions 574-536-6306

3058
Ramco Wide Belt Sander*
36" belt 480V 3 phase power. Contact Myron Miller with any questions 574-536-6306

3059
Black and Decker Radial Arm Saw*
Contact Myron Miller with any questions 574-536-6306

3075
Stihl MS170 Chainsaw
Lightly used and in good condition. Contact Bronson with any questions 574-210-3721

3060
4 Chemical Tanks*
Contact Myron Miller with any questions 574-536-6306

3061
Bartell Power Trowel*
36" Diameter, powered by a 5.5 hp Honda 6X160 engine. Works good. Contact Bronson with any questions 574-210-3721

3062
Miller Sturdi-Saw Concrete Floor Saw*
Powered by a Honda GX390 13 hp engine. Works good. Contact Bronson with any questions 574-210-3721

3063
Mikasa Sangyo Plate Compactor*
Powered by a Honda GX160 engine. Good working condition. Contact Bronson with any questions 574-210-3721

3064
Bartell Plate Compactor*
Powered by a Honda GX160 engine, in good working condition. Contact Bronson with any questions 574-210-3721

3065
Grain Tank*
3 ton capacity, free standing, leg kit and cover are included. Contact Bronson with any questions 574-210-3721

3066
Cement Forms*
18" x 48" 4 pc. fan pad cement forms. Contact Mervin with any questions 260-599-8369

3067
Honda Power Post Hole Auger*
28" Auger. Runs, throttle cable and stop switch need repaired as they are both broken from the handle. Contact Myron with any questions 574-536-6306
 

3068
Roll Case*
45" long 30" rollers, powered by an electric motor 220V. Contact Myron with any questions 574-536-6306

3069
Roll Case*
11' long 30" rollers, hydraulic powered. Contact Myron with any questions 574-536-6306

3070
Casadei EMA KS 1200 Table Saw*
53" cutting capacity, 10" blade 3 phase 220 V. Contact Myron with any questions 574-536-6306

3071
Tapco Port-O-Slitter*
In good condition. Contact Myron with any questions 574-536-6306

3072
12' Aluminum Scaffold with Ladder Jacks*
In good condition. Contact Myron with any questions 574-536-6306

3073
10.5' Tapco Mark 1 Series Metal Brake*
In good condition. Contact Myron with any questions 574-536-6306

3074
1933 Westinghouse Shop Fan*
In good working condition. Contact Bronson with any questions 574-210-3721

3076
Mile Marker Winch*
12V, working condition, includes remote control, weight rating unknown. Contact Bronson with any questions 574-210-3721

3077
Dewalt Cap/Staple Gun*
Model: DWSL18 CAP, Pneumatic power, new condition. Contact Bronson with any questions 574-210-3721

3078
Tractor Dual Tires*
Clamp on style, size 18.4-38. Contact Bronson with any questions 574-210-3721

3079
Stainless Steel Hog Feeder*
Contact Bronson with any questions 574-210-3721

3080
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3081
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3082
Set of Axles*
5-lug, with brakes and leaf springs. Contact Bronson with any questions 574-210-3721

3083
Castors*
10" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3084
Castors*
8" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3085
Castors*
6" diameter, 8 pieces. Contact Bronson with any questions 574-210-3721

3086
Lincoln SP-125 Plus Mig Welder*
110 powered includes tank. Good working unit in great condition. Contact Myron Miller with any questions 574-536-6306

3087
Small Pallet Racking*
(4) 5' x 48s" legs (18) 6' crossbars (3) 8' crossbars with approximately 48 support bars 48". Contact Myron Miller with any questions 574-536-6306

3088
Stackable Plastic Crates*
84 crates. 23" long x 15" wide x 10" tall. Contact Myron Miller with any questions 574-536-6306

3089
Folding Wire Baskets*
9 total. 32" long 18" wide 16" deep. Contact Myron Miller with any questions 574-536-6306

3090
Lot Feed Tote Bags*
25 bags approximately 40" x 40" x 40" used. Contact Myron Miller with any questions 574-536-6306

3091
Cooks Cat Claw Band Sharpener*
Lineshaft ready, includes 4 cams. Good working condition. Contact Myron Miller with any questions 574-536-6306

3092
Tennant 240 EH Floor Sweeper*
Battery operated, does run and operate, sells with charger. Contact Bronson with any questions 574-210-3721

3093
Curb Tec CT3000 Concrete Curb Machine*
In good working condition, powered by a Kohler engine, includes 4 different curb molds, 1 owner machine. Contact Bronson with any questions 574-210-3721

3094
Hobart ARC Welder*
PTO driven, mounted on trailer. Contact Bronson with any questions 574-210-3721

3095
Air Compressor*
Mounted on pallet, powered by 3.5 hp Honda engine. Contact Bronson with any questions 574-210-3721

3096
Crane/Excavator Mats*
Contact Bronson with any questions 574-210-3721

3097
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3098
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3099
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3100
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3101
Misc. Parts*
Belts, brake pads, head lights, etc. Contact Bronson with any questions 574-210-3721

3102
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3103
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3104
Stainless Steel Hog Feeders*
Set of 2, 70" wide. Contact Bronson with any questions 574-210-3721

3105
Livestock Gates*
9 gates with waterers, approximately 9' wide. Contact Bronson with any questions 574-210-3721

3106
Boxes of Drill Bits*
Black and Decker, valve resurfacing machine. Contact Bronson with any questions 574-210-3721

3107
Delta Metal Cutting Bandsaw*
4"x6" bed. Works good. Contact Myron Miller with any questions 574-536-6306

3108
Packard Variable Speed Floor Mount Drill Press*
Works good. Contact Myron Miller with any questions 574-536-6306

3109
Sears Craftsman Combo Sander*
4" belt 6" disc sander. Works good. Contact Myron Miller with any questions 574-536-6306

3110
Fuel Tank*
4', 35" in diameter. Contact Myron Miller with any questions 574-536-6306

3111
Self Catching Pearson Headgate*
Contact Myron Miller with any questions 574-536-6306

3112
Antique Hand Powered Drill Press*
Contact Myron Miller with any questions 574-536-6306

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Bright Star Equipment Auction Day 2 Ring #1
 Live Auction
 
Sale Date(s)
Thursday Apr 6, 2023 Completed
Sale Location

Middlebury, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid day of auction for onsite bidders and within 7 days for online purchasers. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within seven (7) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Bright Star Equipment Auction * All items sell absolute* No Minimums * No Reserves * Consign now for free advertising * Items wanted include but not limited to Skid Loaders - Excavating Equipment - Contractors Equipment - Rolling Stock - Semi Trucks - Dump Trucks - Trailers - Attachments Much Much More. Call Bronson 574.210.3721 or Tim 269-986-5693 to consign early for maximum free advertising.

00
Information Lot
Looking for quality consignments of construction, excavating, forestry, and other heavy equipment. We will be taking consignments until Monday, April 3rd. Free loadout day of the auction until 4 PM. Office will be closed on Friday, April 7, due to the Good Friday holiday. Free loadout Saturday, April 8, from 8 am to 1 PM, and until April 21st M-F from 8 AM – 4 PM. After that by appointment and for a $25 per lot loading fee. Any items not picked up in 30 days become the property of the auction company.

1500
2004 Ford Ranger Pickup Truck
Year: 2004
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 195,567
Body Type: Extended cab
Trim Level: XLT
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); SOHC
Fuel Type: Gasoline
Horsepower: 203-210HP
Transmission: Automatic
VIN #: 1FTZR45E14PA25396

Features and Notes: power windows and lock, hitch, rebuilt title. Contact Bronson with any questions 574-210-3721

1475
1996 Ford F-450 Pickup Truck, VIN # 1FDLF47GXTEB77700 Bucket Truck*
Year: 1996
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage:274432
Plate:
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x2
Engine Type: V8, 7.5L (460 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic
VIN #: 1FDLF47GXTEB77700

Features and Notes: Starts but runs rough. Contact Tim Graber 269-986-5693.

1
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

1501
1998 Dodge Ram Pickup Pickup Truck
Year: 1998
Make: Dodge
Model: Ram Pickup
Vehicle Type: Pickup Truck
Mileage: 248,773
Body Type: Extended cab
Trim Level: Base
Drive Line: 4WD
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1B7KF2366WJ212732

Features and Notes: 4x4, it has 24 V Cummins Diesel, extended cab with 3rd and 4th door, power interior, trailer brakes, boss plow mount, Rhino lined bed. Contact Bronson with any questions 574-210-3721

2
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1502
2003 Honda Civic
Mileage: 283,895
Body Type: 4 Door Sedan
Trim Level: EX
Drive Line: FWD
Engine Type: L4, 1.7L; VTEC-E
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1HGES26823L025270

Features and Notes: It is a 4-door that seats 5, has power windows, locks, mirrors and has a sunroof, It does start and run. Sells with mechanics lien paperwork. Call Bronson 574-210-3721  

1675
1969 Allis Chalmers 180
Powered by a 4.3 liter 6 cylinder gasoline engine. Rated for 65HP at 2000 RPM backed by an 8-speed partial powershift transmission. Right rear hub plate and bolts bolts were just replaced. 18.4-28 tires with 16" rims. Tires are at about 50%. Meter reads 6653 hours. Very well maintained, good running, clean machine. Contact Myron Miller 574-536-6306.

1676
1952 Ferguson Tractor
Model: T0 30
SN: 82502
Meter reads: unknown
Engine: Continental 2.1L 4 cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: Rear wheel
Rear PTO: yes
3 Point hitch: yes

Features and Notes: new headlights
 

1503
2004 Ford F-450 Pickup Truck, VIN # 1FDXF47P04ED48568
Year: 2004
Make: Ford
Model: F-450
Vehicle Type: Pickup Truck
Mileage: 227,971 miles
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x4; Dual Rear Wheels
Engine Type: V8, 6.0L (366 CID); Turbo
Fuel Type: Diesel
Horsepower: 325HP
Transmission: Automatic
VIN #: 1FDXF47P04ED48568

Features and Notes: 4 wheel drive, brake controller, Leather interior, runs and drives, 8' x 8 1/2' aluminum flat bed, gooseneck hitch

1503
2002 Ford F-350 Pickup Truck
Year: 2002
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage: 375,112 miles
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic
VIN #: 1FTSW31F92ED18412

Features and Notes: Engine come with performance chip. Has leather interior, long bed, and gooseneck hitch, has title.  Contact Bronson with any questions 574-210-3721

1504
2000 Ford F-550 Truck, VIN # 1FDAW57F1YEA21072
Year: 2000
Make: Ford
Model: F-550
Vehicle Type: Truck
Mileage: 145,505 miles
Body Type: Crew Cab
Drive Line: 4x4
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Transmission: Automatic
VIN #: 1FDAW57F1YEA21072

Features and Notes: Engine light is on, starts with jump pack and starting fluid, 8' x 9' dump box

1677
1946 McCormick Farmall Tractor
Model: M
SN: 121381X1
Meter reads: unknown
Engine: 4.1L 4 cylinder
Fuel type: Gasoline
Transmission type: 5 speed sliding gear
Drive: 2 WD
Rear PTO: yes
3 Point hitch: no

Features and Notes: starts and runs but loses power when put into gear
 

1504
2000 Chevrolet Express Van
Year: 2000
Make: Chevrolet
Model: Express
Vehicle Type: Van
Mileage: 215,211 miles
Body Type: 3 Door Van; Sport
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNGG25RXY1155276

Features and Notes: has a brand new passenger rear tire, in running condition. Contact Myron with any questions 574-536-6306

1505
2013 Ford F-150 Pickup Truck
Year: 2013
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 151,715 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XL; Limited; Platinum; XLT; Lariat; King Ranch; FX4
Drive Line: 4WD
Engine Type: Remanufactured Jasper Engine (installed at 118,000 miles)
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1FTFW1ET7DFA13994

Features and Notes: Has leather heated interior, trailer brakes, navigation and bluetooth compatible. Its full digital display. Comes with a tonneau cover for the short bed. Truck has all LED lights. Jasper Engine is still under warranty. Paint does have runs in it. Newer tires.***rebuilt title Contact Bronson with any questions 574-210-3721

1678
1940 Ford Tractor
Model: 9N
SN: 9N15314
Engine: 4-cylinder, 26 hp
Fuel type: gas
Transmission type: 3-speed with reverse
Drive: 2-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: it has been converted to 12 volt, Carburetor does leak when sitting for extended time, brakes do need work, studded front tires, runs and operates. Contact Bronson with any questions 574-210-3721
 

1679
1942 Allis Chalmers Tractor
Model: B
SN: B58938
Engine: 1.9L 4-cylinder
Fuel type: Gasoline
Transmission type: Unsynchronized gear, 3 forward 1 reverse 
Drive: 2 wheel
Rear PTO: no
3 Point hitch: no

Features and Notes: full restored 8 years ago, tires are in very good condition, electric start, has lights, 6V new water pump, it has rare flared fenders. The alternator was just completely rebuilt along with a new battery and coil. Contact Myron with any questions 574-536-6306
 

1506
2006 Ford F-150 Pickup Truck
Year: 2006
Make: Ford
Model: F-150
Vehicle Type: Pickup Truck
Mileage: 267,062 miles
Body Type: 4 Door Cab; Styleside; Super Crew
Trim Level: XLT; Lariat; King Ranch
Drive Line: RWD
Engine Type: V8, 5.4L; FFV
Fuel Type: Gasoline/E85
Transmission: Automatic
VIN #: 1FTPW12V26KD63618

Features and Notes: seats 6, short bed. Its starts and runs, idles rough. Contact Bronson with any questions 574-210-3721

1507
2005 Chevrolet TrailBlazer EXT Multipurpose Vehicle
Year: 2005
Make: Chevrolet
Model: TrailBlazer EXT
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 201,773 miles
Body Type: 4 Door Wagon
Trim Level: LS; LT
Drive Line: 4WD
Engine Type: V8, 5.3L; SFI
Fuel Type: Gasoline
Transmission: Automatic
VIN #: 1GNET16M556190628

Features and Notes: Has 3 row seating and all powered heated leather interior. Dual climate controls. It starts and runs. The check engine light is on and power steering is not working. Contact Bronson with any questions 574-210-3721

1680
1986 Massey Ferguson Tractor
Model: 1030D
SN: 41344
Meter reads: 1184 hours
Engine: 1.4 liter 3-cylinder 26hp
Fuel type: Diesel
Transmission type: Manual
Drive: 4-wheel drive
Rear PTO: yes
3 Point hitch: yes

Features and Notes: Front end loader, four gears, plus reverse in three ranges (L-M-H), engine was fully rebuilt 2 years ago, good running well maintained machine. Contact Myron Miller with any questions 574-536-6306
 

1550
1995 RS Open Top Chip Trailer
VIN: 1R217D2A5S2001158, 53' long, last inspected 06/2021, good cover. Contact Bronson with any questions 574-210-3721

1681
1950 Ford Tractor
Model: 8N
SN: 253708
Engine: 2.0L 4-cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 4 forward and 1 reverse gears, converted to 12V, lights work, new clutch and alternator, in good running condition. Contact Myron Miller with any questions 574-536-6306
 

1551
1978 Fruehauf Open Top Chip Trailer
VIN: MEZ605050, 53' long, last inspected 07/2022, good cover. Contact Bronson with any questions 574-210-6721

1682
Massey Ferguson
Model: 1220
SN: C24206
Meter reads: 558
Engine: Iseki E3112 3-cylinder
Fuel type: Diesel
Transmission type: Manual
Drive: 4WD
Rear PTO: yes
3 Point hitch: yes

Features and Notes: 6 forward and 2 reverse gears. Includes 6' front mount snow blade. Front and rear light bars, original lights and shift knob are included. In very good condition. Contact Myron Miller with any questions 574-236-6306
 

2029
New Chain and Binder Sets
5 sets of Ratchets rated at 5'400 lbs, and 10 5/16" chains 20' long.  Call Bronson 574-210-3721 

1552
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492056, 53' long, last inspected 04/2020, not currently road worthy, missing back door. Contact Bronson with any questions 574-210-6721

1683
John Deere A Tractor
Engine: 5.1 Liter 2 cylinder
Fuel type: Gas
Transmission type: Manual with slide clutch
Drive: RWD
Rear PTO: yes
3 Point hitch: no

Features and Notes: 4 speed unsychronized gear, does not run, needs work. Contact Myron Miller with any questions 574-536-6306
 

1553
1998 Wabash 53' Van Trailer
VIN: 1JJV532W6WL492090, 53' long, last inspected 04/2019, not currently road worthy

1684
1947 Farmall M Tractor*
SN: 137010X1
Engine: 4.1 Cylinder
Fuel type: Gasoline
Transmission type: Manual
Drive: 2WD
Rear PTO: yes
3 Point hitch:  no

Features and Notes: New starter. 5 speed sliding gear. Runs and operates however the hydraulic needs work and it has a slight gas leak if it is not shut off. Contact Myron Miller with any questions 574-536-6306
 

1554
1976 Timpte D31 Walking Floor Trailer
VIN:D31BN68850,  The live floor works. It has new tarp and new back doors. The trailer does need some work. It works off of wet kit. Contact Bronson with any questions 574-210-3721

1685
2017 Kubota L4701D Tractor*
SN: 61915
Meter reads: 1,440 hours
Engine: 4- cylinder 2.4 liter Kubota 47hp
Fuel type: Diesel
Transmission type: Hydrostatic
Drive: 4WD
Rear PTO: yes, 540
3 Point hitch: yes

Features and Notes: It has a 72" front loader bucket wit quick attach, rear back hoe attachment with 12" x 18", and 24" buckets, D.P.F. has been deleted, runs and drives good. Contact Bronson with any questions 574-210-3721
 

1725
AG National Products Bale Wrapper
SN: 41087, with skid loader mount, wraps 4' x 5' round bales, standard flow hydraulics. Contact Bronson with any questions 574-210-6721

1555
2016 Team Spirit Gooseneck Trailer
VIN: 1T9LD2629GE661409
Tandem axle with working lights and brakes, was converted from bumper pull to gooseneck and used as an insulation trailer. Contact Myron Miller with any questions 574-536-6306

1726
Aitchison No Till Grain Drill
SN: 3803, with double disk opener retro fil, 8' wide, 16 row, ground driven, foam feed rolls. Contact Bronson with any questions 574-210-6721

1575
2003 PJ Gooseneck Trailer
VIN: 4P5GN262731053884, 8' wide x 25' long with 5' dove tail and 4' rams, Dual tandem axles rated at 10000 lbs each, 20000 GVWR. Has good decking and needs tires. Contact Bronson with any questions 574-210-3721

1727
Jay-Lor A50 Feed Mixer
SN: 018033, Powered by a Briggs and Stratton 13 hp Vangaurd engine with an electric start. It's self propelled with scale. 50' cubic foot capacity. It runs and operates. Contact Bronson with any questions 574-210-3721

1576
1984 Jayco 28' 5th Wheel Camper
VIN: MVIN168721IND
full kitchen, dinette sofa, front bedroom, bathroom. Does show signs of roof leaking, awning. Contact Bronson with any questions 574-210-3721

1577
1994 Wells Cargo Enclosed Trailer
Year: 1994
Make: Wells Cargo
Model: TW101-V / 2-Place MC122-7 TE
Vehicle Type: Trailer
Body Type: Aluminum
VIN #: 1WC200E11R1064126

Features and Notes: 6' x 12', has swinging rear door, new axle, spare tire, shelving, adjustable height, 2 coupler pulls with 2 5/16" ball. Contact Bronson with any questions 574-210-3721

1728
John Deere 930 Moco Impeller Haybine
Uses 1000PTO with tractor hydraulics, missing PTO link, in good condition. Contact Myron with any question 574-536-6306

1578
Dump Trailer
Manure spreader converted to sawdust trailer. Pulls with pin hitch. Trailer has Tandem axle, tarp top, good cover. Hydraulic powered dump. 7'W x 16'L. Does not come with a title. Contact Bronson with any questions 574-210-3721

1729
Hesston 4900 Hay Baler
SN: BB49-00738, 1000 PTO driven with monitor with applicator, produces 4.4 hay bales. Contact Bronson with any questions 574-210-3721

1579
2010 Trailer
VIN: 4YMLT122XAG090305, 6' x 12 inside width, Tandem 3500 lb axles. includes LED lights, brakes, adjustable coupler. 7000 GVWR, swing rear doors, 2 5/16 ball, has title. Contact Bronson with any questions 574-210-3721

1730
John Deere 7000 Planter
13'wide, 6 row, good working condition. Just reconditioned by Shipps Precision. Has new parts and is field ready. Contact Bronson with any questions 574-210-3721

1580
2008 Car Mate Trailer
Year: 2008
Make: Car Mate Trailers
GVWR: 2990
VIN #: 5A34510S28L003350

Features and Notes: 5' x 10' with 4' drive on ramp. Has 5-lug axle, pulls with 2" ball, and has LED lights. Trailer is in good condition. Contact Bronson with any questions 574-210-3721

1731
Esch 5512 No Till Drill
In good condition and field ready. Extra parts included, storage cover included. Contact Bronson with any questions 574-210-3721

1581
8x16 Coach Craft Aluminum Trailer
VIN: 1C9EU12212B746361
tandem 5 lug 3500 lb torsion axles, pulls with 2 5/16" ball, ramp style rear door and curbside, 7' inside height, front jack wheel is broken, brakes need to be hooked up, in good condition. No title, comes with a bill of sale only. Contact Myron Miller with any questions 574-536-6306

1732
Rain Bow Irrigation Systems
Traveling irrigation unit, 2 hoses at approx. 600'. Does have small leaks. Powered by Honda engine and turbine. Contact Bronson with any questions 574-210-3721

1650
16' Ebbtide Boat
Engine is incomplete and the interior needs redone, bill of sale only. Contact Myron Miller 574-536-6306

1733
Case IH Crumbler
24' wide, product ID number: JFH0034045, only used 1 season. Contact Bronson with any questions 574-210-3721

1651
820 Aqua Patio Pontoon
13 person, comes with 35hp Johnson and has 24' toons, would make a good project boat, sells with Bill of Sale only. Contact Myron with any questions 574-536-6306

1734
Oliver 546 Plow
5-bottom plow, in good working condition. Contact Bronson with any questions 574-210-3721

1735
Art's -Way PM 30 Tub Grinder Mixer*
SN: AWPM30950413
Model: FPS-PM-0006
150 Bushel capacity
Includes digital scale and adapters to run off single remote hydraulic. Contact Bronson with any questions 574-210-3721

1736
Grain Cart*
5' wide x 7' long, PTO operated with auger and tarp cover. Contact Bronson with any questions 574-210-3721

1737
Gravity Wagon*
6' wide x 10' long, with new cover. Contact Bronson with any questions 574-210-3721

1738
20' Field Cultivator*
12' main with 4' bat wings. The hydraulics work but the hoses will need to be replaced. One tire is missing. Contact Myron Miller with any questions 574-536-6306

1739
8' John Deere Pull Behind Seeder*
Model: LF Serial: 18218. Contact Myron Miller with any questions 574-536-6306
 

1740
White Chisel Plow*
7 row. Contact Bronson with any questions 574-210-3721

1741
Plow Packer*
8' wide. Contact Bronson with any questions 574-210-3721

1750
1995 Froedge 450 Deduster
SN: 25050, Model: 121BD 18BC, electric drive, wired for 220V 3 phase, needs new brushes, up to 8" wide, up to 6" thick and up to 8' in length capacity, in good condition. Contact Myron Nissley with any questions 574-536-2481

1751
Smart Single Head Notcher
Single head, 20 hp electric drive, wired for 220V 3 phase, manual feed, 72" capacity, 9" wide cutter head, indexable teeth, electric drive board kicker, ready for production. Contact Myron Nissley with any questions 574-536-2481

1752
Heartland Chop Saw
18" blade, includes adjustable board stops, mounted to 30" wide x 70" long x 36" high steel bench, 10 hp electric motor on head, wired for 220V 3 phase. Contact Myron Nissley with any questions 574-536-2481

1753
Belt Conveyor
12" x 11' conveyor with 11" belt, 3/4 hp electric motor. Contact Myron Nissley with any questions 574-536-2481

1754
Pacific Trail Yard Saw
Powered by a Honda GX630 electric start engine. It has a 6' cutting capacity and comes with 5 extra blades.This unit is in like new condition and was used to cut only 2 loads of bundles. In working condition. Contact Myron Miller with any questions 574-536-6306
 

1775
120 KW Natural Gas Genset
Powered by a 454 big block engine fully rebuilt with all stainless parts only 2000 hours ago. The generator is a Marelli with a total of 2000 hours. It is a 480V system with an electronic governor set at 1800 RPM. Great running well maintained machine. Contact Myron Miller 574-536-6306

 

1776
Miller Big Blue 402D Welder/Generator
SN: LB106031, 698 hours, Duetz Diesel Engine, TIG/Stick/MIG welder, single and 3 phase generator. In excellent working condition. Contact Bronson with any questions 574-210-3721

1777
Kohler 125 Genset
SN: 3366GMGH0036, Model: 125REOZJG, 60 Hz., 3 phase, 128 kw., 3 pole 250 amp and 150 amp breaker manufactured 7/16/19. 4.5L John Deere diesel engine Model: 4045HF285, SN: PE4045N022679, 1800 rpm meter reads, .6 hour, started 12 times, 6" x 12" x 6" temporary gas tank, 106" x 44" x 60" overall size, needs new battery, starts without hesitation. Contact Dan with any questions 574-612-0074

1778
Empire Genset
SN: 371-122, Model: 550DGW-8E, 6-cylinder Perkins diesel engine, 3121 hours, 50kw, 120/208 V, starts and runs good, control box will need some work. Contact Bronson with any questions 574-210-3721

1779
Kohler Genset
SN:448445-C2, Model: C605, International V8 natural gas powered, 493 hours, 277/4880 V, 3-phase, 88kw, generator works, starts and runs as it should. Contact Bronson with any questions 574-210-3721

1780
John Deere Power Unit
SN: RG6619A062541, With attached corn chopper mounted on heavy duty trailer with skid loader tires. Meter reads 558 hours, has a clutch, 6-cylinder diesel engine. Contact Bronson with any questions 574-210-3721

1781
Genset 2-Cylinder Diesel with 8 KW Generator
Shows 9843 hours, Murphy switch may need replaced but otherwise works well. Contact Bronson with any questions 574-210-3721

1782
Kohler 14KW Propane Power Unit*
4 110V outlets and 1 125/250V 50A outlet.Good working unit. Contact Myron Miller with any questions 574-536-6306

1783
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1784
Hydraulic Power Unit*
Manufactured by Evergreen Equipment, powered by Onan engine, needs battery, worked when put away. Contact Bronson with any questions 574-210-3721

1800
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1801
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate.  Call Bronson 574-210-3721

1802
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1803
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1804
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1805
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1806
New Skid Steer Rock Grapple Bucket
72'' working width, pictures coming soon.  Call Bronson 574-210-3721 

1807
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1808
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1809
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1810
New Pallet Fork Extensions 10
New 10' Pallet fork extensions rated for 6600 lbs.  Call Bronson 574-210-3721 

2000
New 40' Shipping Container
New 40', high cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

1811
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2001
40' Shipping Container Tiny House
It is fully wired and insulated and has rear patio doors behind the shipping container doors that can be removed and have a nice deck installed, It has 2 bedrooms, that could be an office, It has a bathroom and office that are not plumbed.  It is insulated, ventilated, and has double hung windows and a slanted roof.  Call Bronson 574-210-3721 

1812
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2002
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1813
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2003
New 30 yard Roll Off Dumpster
It is a standard rail, cable hook, open top rectangular roll off dumpster with a 7GA floor, 11GA sides, 3'' channel floor frame, 5'' x 3'' x 3/16'' top rail, 5'' x 3'' x 11GA channel side posts, spaced at 24'' centers, ground rollers are 8'' x 10''. It is 22' long, 64'' inside height and 7' inside width. Call Bronson 574-210-3721

1814
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2004
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1815
2022 Wolverine Brush Cutter
72" In brand new condition. Contact Myron Miller 574-536-6306.

2005
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

1816
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2006
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

1817
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.6.

2007
New Bastone 2 Portable Restroom Stalls
The Bastone, 2 private stalls, portable restroom features a toilet, a sink, a light and an extractor and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. 
  • Dimensions (ft): L4.3*W7*H7.7 
  • 1/2" female inlet ports for hot & cold water
  • 3" black water/waste exhaust flexible hose (easily slide your 3" PVC pipe onto flex fitting for waste)
  • 1" PVC water outlet exhaust port (for sink water)
  • Bowl Shape: elongated
  • Mount type: wall mounted
  • Flush volume: 1.6 gpf
  • Condition: New
  • Call Bronson 574-210-3721

1818
2022 Wolverine Tiller
72" In brand new condition. Contact Myron Miller 574-536-6306.

2008
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1819
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2009
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1820
2022 Wolverine Boxbroom Sweeper
72" In brand new condition. Contact Myron Miller 574-536-6306.

2010
New Dome Storage Shelter
30' X 20' X 12', with 6 arches and 12 anchor plates and is UV proof, leak and fire resistant. Call Bronson 574-210-3721

1821
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2011
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1822
2022 Wolverine Sickle Bar Mower
15-25GPM with in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2012
New Container Shelter
20' X 20' X 6'6'' with 5 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

1823
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2013
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1824
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width. In brand new condition. Contact Myron Miller 574-536-6306.

2014
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1825
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2015
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1826
2022 Wolverine Trencher
Capable of a 48" trenching depth with an 8" trench width.In brand new condition. Contact Myron Miller 574-536-6306.

2016
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1827
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9".In brand new condition. Contact Myron Miller 574-536-6306.

2017
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1828
2022 Wolverine Ripper
60" wide with a ripping depth of 7-9". In brand new condition. Contact Myron Miller 574-536-6306.

2018
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1829
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2019
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1830
2022 Wolverine Land Leveler
78" In brand new condition. Contact Myron Miller 574-536-6306.

2020
New 20' Iron Gate with Deer Logo
New 20' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. Call Bronson 574-210-3721

1831
2022 Wolverine Concrete Breaker
Model 750 In brand new condition. Contact Myron Miller 574-536-6306.

2021
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1832
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2022
New Steelman Work Bench Toolbox
Model 7ft-20D, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

1833
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2023
New Steelman Work Bench Toolbox

Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Blue in color

1834
2022 Wolverine Concrete Mixer
300 liter capacity. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2024
New Steelman Work Bench Toolbox
Model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.  Red in Color

1835
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2025
New Steelman Work Bench Toolbox
Model 7FT-35D. It has 35 drawers and 1 cabinet, 3 rail sliding drawers, anti slip mats, 110 lb rating per drawer. Call Bronson 574-210-3721

1836
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2026
New Highway Safety Cones
Lot of 250 safety cones in new condition. 

1837
2022 Wolverine Grapple Bucket
72" In brand new condition. Contact Myron Miller 574-536-6306.

2027
New 24 Piece Ratcheting Tie Downs*
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

1838
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2028
New Chain and Binder Sets
5 sets of Ratchets rated at 9'200 lbs, and 10 3/8" chains 20' long.  Call Bronson 574-210-3721 

1839
2022 Wolverine Hydraulic Adjustable Pallet Forks
48" forks, class II, 1.5" thick, 4" wide. In brand new condition. Contact Myron Miller 574-536-6306.

2030
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

1840
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2031
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

1841
2022 Wolverine 3 Point Hitch Adapter
In brand new condition. Contact Myron Miller 574-536-6306.

2032
New 12'000 lb Electric Winch
12 volt, ready to install. Call Bronson 574-210-3721 

1842
2022 Wolverine Vibratory Roller
60" with a stimulation force of 3.3T. In brand new condition. Contact Myron Miller 574-536-6306.

2033
New 28'' x 90'' KC Steel Work Bench*
Call Bronson 574-210-3721 

1843
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2100
Kubota B6000E Tractor
Powered by a water cooled 4cycle 2cylinder diesel rated at 12.5HP at 2700rpm. 6 forward gears and 2 reverse. 3 point with pto. Tractor is cold blooded but does start. It runs well. Everything works as it should. Has been stored inside. Missing air filter cap. * Contact Myron Miller 574-536-6306.

1844
2022 Wolverine Angle Broom Attachment
72" sweeping width, 24" brush diameter. With in cab controller. In brand new condition. Contact Myron Miller 574-536-6306.

2101
Cub Cadet LTX 1040 Garden Tractor
Includes 42" cutting deck and bagging system. Kohler 19 hp gas engine. Contact Myron Miller 574-536-6306

1845
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1846
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1847
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1848
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1849
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1850
2022 Wolverine Auger Drive and Bit
Comes with 12" and 18" augers. 25" effective working depth. In brand new condition. Contact Myron Miller 574-536-6306.

1851
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1852
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1853
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1854
2022 Wolverine Pallet Fork Extensions
8' In brand new condition. Contact Myron Miller 574-536-6306.

1855
New Kivel 48'' Skid Steer Pallet Forks
3500 lb capacity. Call Bronson 574-210-3721 

1856
New 7' Pallet Fork Extensions*
Call Bronson 574-210-3721 

1857
12" and 18" Augers*
Contact Myron Miller 574-536-6306.

1858
Side Shooter Bucket
1150 lb capacity 6' wide, good working condition, standard flow hydraulic. Contact Bronson with any questions 574-210-6721

1859
AG National Products Bale Grabber
6' round bale capacity, in good working condition

1860
3 Point Brush Mower
60" wide, 3 point lift and PTO, driven. Contact Bronson with any questions 574-210-3721

1861
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1862
New Skid Steer Snow Plow Attachment
86'' wide,  Call Bronson 574-210-3721

1863
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1864
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate. Call Bronson 574-210-3721

1865
New Skid Steer Rotary Broom
72'' wide working width. Call Bronson 574-210-3721 

1866
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1867
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1868
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. Call Bronson 574-210-3721

1869
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1870
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'', new in crate. Call Bronson 574-210-3721

1871
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1872
New Skid Steer Rotary Cultivator Attachment*
9 tines, 72'' wide working width, new in crate.  Call Bronson 574-210-3721

1873
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1874
New Skid Steer Tree Shear Attachment
New in the crate. Call Bronson 574-210-3721

1875
3-Point Finish Mower
It is 72" wide and is 540 PTO driven. Contact Myron Miler with any questions 574-536-6306

1876
7' 3-Point Logging Frame
Contact Myron Miler with any questions 574-536-6306

1877
7' Fork Pocket 5 Position Snow Blade
Contact Myron Miler with any questions 574-536-6306

1878
Skid Loader Attachment
Pallet forks, 4" x 48" forks, telehandler style adjustable width. Contact Bronson with any questions 574-210-3721

1879
Laforge Tractor Hitch/Lift Mounts
1LTJDS80 model and 1 LS model in good condition. Contact Myron Miller with any questions 574-536-6306

1880
3-Point Compact Raised Bed Layer
In good condition. Contact Myron Miller with any questions 574-536-6306

1881
Set of 44" Block Forks

1882
Home Built Snow Plow
Made from I-Beam and built to fit pallet forks, 8' wide. Contact Bronson with any questions 574-210-3721

1883
3 Point Chipper*
Merry MAC, PTO driven, in working condition. Contact Bronson with any questions 574-210-3721

1884
3-Point Blade*
8' wide. Contact Bronson with any questions 574-210-3721

1885
2 CY. Skid Steer Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

1886
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1887
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1888
84" Light Duty Fork Extension*
Contact Bronson with any questions 574-210-3721

1889
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1890
76" Skeleton Bucket Open Slide*
Contact Bronson with any questions 574-210-3721

1891
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1892
76" Skeleton Bucket High Side*
Contact Bronson with any questions 574-210-3721

1893
40" Sid Steer Spade Bucket*
Contact Bronson with any questions 574-210-3721

1894
70" Root Rake*
Contact Bronson with any questions 574-210-3721

1895
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1896
66" Skid Loader Bucket with Teeth*
Contact Bronson with any questions 574-210-3721

1897
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1898
78" Bucket with Single Blade*
Contact Bronson with any questions 574-210-3721

1899
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1900
84" Snow/Litter Bucket*
Contact Bronson with any questions 574-210-3721

1901
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1902
3/4 CY. Concrete Placement Bucket*
Contact Bronson with any questions 574-210-3721

1903
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1904
Fork Frame 48" for Skid Steer*
Contact Bronson with any questions 574-210-3721

1905
Cable Winch*
Skid attachment, hydro drive, used to install belt in grain leg, in good condition. Contact Mervin with any questions 260-599-8369

1906
Asphalt Grinder*
Skid attachment, hydrostatic drive, in good condition. 

1907
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1908
5' 3- Point Box Blade*
Contact Myron Miller with any questions 574-536-6306

1909
5' 3-Point Box Blade with Ripper Teeth*
Contact Myron Miller with any questions 574-536-6306

1910
9' Boss Skid Steer Mount Snow Blade*
Contact Myron Miller with any questions 574-536-6306

1911
7' Rear Blade*
Reese hitch mount. electric controls. Contact Myron Miller with any questions 574-536-6306

1912
WB Excavator Bucket*
24" wide, last used on a Bobcat. Contact Bronson with any questions 574-210-3721

1913
Skid Loader Grapple Bucket*
78" wide, dual cylinders, standard flow hydraulics. Very little use. Contact Bronson with any questions 574-210-3721

1914
Bush Hog 2512 Mower*
12' wide, rough cut bush hog mower, 3-point attach, 1000 PTO power. Contact Bronson with any questions 574-210-3721

1915
36" Wain Roy Backhoe Bucket*
1/8 yd. unused. Contact Myron Miller with any questions 574-536-6306

1916
42" Excavator Bucket*
3/4 yd. It was last used with a Cat excavator. It has 2 new teeth on the bucket and comes with 7 new teeth and hardware in box. The bucket has a weldable crack on the top. Contact Myron Miller with any questions 574-536-6306
 

1917
Weldable Quick Attach Plate*
Contact Bronson with any questions 574-210-3721

1918
Jun Pulverizer*
In good working condition. 1 owner, very little use, currently set up to mount on CAT 305 excavator. Contact Bronson with any questions 574-210-3721

1919
Jack Hammer*
Needs rebuilt, cones with skid steer mount and currently set up to mount on Bobcat excavator. Contact Bronson with any questions 574-210-3721

1920
6' Bush Hog*
Rough cut mower, 3 point attach, PTO driven. Contact Bronson with any questions 574-210-3721

1921
Allis Chaimers Plank*
2 row planter, 3-point attachment, ground driven, working condition. Contact Bronson with any questions 574-210-3721

1922
Cultivator*
3-point attachment. Contact Bronson with any questions 574-210-3721

1923
John Deere Backhoe Bucket*
24" wide, 5-tooth bucket, fits a 310 or 410 backhoe. Contact Bronson with any questions 574-210-3721

3000
New 40' Shipping Container
High cube, multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide. Call Bronson 574-210-3721

3001
New 9' Storage Container
9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3002
New 8' Storage Container
8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses. Call Bronson 574-210-3721

3003
New Bastone Portable Private Restroom/Shower
The Bastone private portable restroom features a toilet, shower, sink, light, and an extractor, and it is a full-service portable restroom kiosk that is similar to a bathroom in your house. Call Bronson 574-210-3721

3004
New Container Shelter
20' X 40' X 6'6'', with 9 arches, UV proof, leak resistant, fire resistant. Call Bronson 574-210-3721

3005
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in color. Call Bronson 574-210-3721 

3006
New Steelman Work Bench Toolbox
Model 7ft-10D. It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Red in color.  Call Bronson 574-210-3721 

3007
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb. rating per drawer. Stainless Steel. Call Bronson 574- 210-3721 

3008
New Steelman Work Bench Toolbox
Model 7ft-10D, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Stainless Steel. Call Bronson 574-210-3721 

3009
New Steelman Work Bench Toolbox
Model 7ft-18D. It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. Red in Color. Call Bronson 574-210-3721

3010
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3011
New Highway Safety Cones
Lot of 250 safety cones in new condition. Call Bronson 574-210-3721

3012
New Self Dumping Hopper
1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3013
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom.  Call Bronson 574-210-3721 

3014
New 24 Piece Ratcheting Tie Downs
16 pieces of 2'' x 27' and 8 pieces of 1.5'' x 27' in brand new condition. Comes with a storage box.  Call Bronson 574-210-3721 

3015
Rigging Hardware
New shackles in various sizes. Call Bronson 574-210-3721 

3016
New 2T-5T Webbing Sling 22 pieces
Call Bronson 574-210-3721 

3017
New 5/16'' 7 FT G80 Double Legs Lifting Chain Sling
Call Bronson 574-210-3721 

3018
New Hot Water Pressure Washer
4,000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport.  Call Bronson 574-210-3721 
 

3019
Galvalume G Panels 8' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3020
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3021
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3022
Galvalume G Panels 12' long 36" Coverage*
Contact Bronson with any questions 574-210-3721

3023
3/8" AR500 Steel Boar Shooting Target with Heart Flapper*
Contact Bronson with any questions 574-210-3721

3024
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3025
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3026
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3027
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3028
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3029
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3030
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3031
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3032
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3033
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3034
2 CY. Self Dumping Hopper with Fork Pockets*
Contact Bronson with any questions 574-210-3721

3035
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3036
4 CY. Debris Box*
Contact Bronson with any questions 574-210-3721

3037
Patz 12' Silage Conveyor*
Electric drive 115 or 240 V. Contact Myron Miller with any questions 574-536-6306

3038
6 - 30 Gallon Snyder Tanks*
Unused. Contact Myron Miller with any questions 574-536-6306

3039
Delta Bench Top Drill Press*
Powered by. 5 HP electric motor. It is on a stand with wheeled cart. Includes chuck. It is in very good condition. Contact Myron Miller with any questions 574-536-6306
 

3040
150' of New 1" Pro Poly Underground Gas Line*
Contact Myron with any questions 574-536-6306

3041
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3041A
Shipping Container*
40'. Contact Bronson with any questions 574-210-3721

3042
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3043
Shipping Container*
20'. Contact Bronson with any questions 574-210-3721

3044
Quincy Air Compressor*
Powered by a Honda 6X390 Engine with electric start, 30 gallon capacity. Contact Bronson with any question 574-210-3721

3045
Walker 7 Ton Floor Jack*
Trailer/bumper jack, pneumatic power. Works good. Contact Bronson with any questions 574-210-3721

3046
Magnum 4000 EZ Clean Hot Pressure Washer*
3.5 GPM @ 4000 PSI Pump adjustable pressure. Industrial duty engine. Oil/Diesel fired burner, thermostat controlled. Schedule 80 coil with stainless steel housing.Fully welded, powder coated. 10 gallon poly fuel tank. Comes with wand and 30' of hose.1 tire does have a air leak but otherwise the unit is in very good condition. Contact Myron Miller with any questions 574-536-6306

3047
Grain Bin Jacks*
4' x 12', tripod style, 6 total, stakes and 2 ton chain hoists, 6 can build a 36' x 13 ring. In good condition. Contact Mervin with any questions 260-599-8369

3048
Grain Bin Jacks*
New! 4' x 12', tripod style, 4 total, stakes included, 4 can build a 27' x 13 ring. Contact Mervin with any questions 260-599-8369

3049
Cement Forms (Grain Bin)*
2' x 10', 10 pcs. 4' stakes, forms up to 36', in good condition. Contact Mervin with any questions 260-599-8369

3050
Honeyville Auger*
1-9 S 05662, 10" x 15', painted, HD flighting, hydraulic drive, in very good condition. Contact Mervin with any questions 260-599-8369 

3051
Cable Unroller*
36" x 36", like new. Contact Mervin with any questions 260-599-8369

3052
New! Galvanized Cable*
7 x 19 3/8 cable, approx. 4000'

3053
Grain Leg*
1000 BPH, 54' fill height, new belt and vented cups, in good condition. Contact Mervin with any questions 260-599-8369

3054
Big Joe Electric Pallet Jack*
SN: 800084, Model: PDI20, Max height 147", on board battery charger, man cage with harness included, 669 hours. Contact Bronson with any questions 574-210-3721

3055
Pratt and Whitney Co Milling Machine*
Works good. Contact Bronson with any questions 574-210-3721

3056
South Bend Lathe*
Box with extra tooling included. Contact Bronson with any questions 574-210-3721

3057
Carolina Metal Band Saw*
220 single phase power. Contact Myron Miller with any questions 574-536-6306

3058
Ramco Wide Belt Sander*
36" belt 480V 3 phase power. Contact Myron Miller with any questions 574-536-6306

3059
Black and Decker Radial Arm Saw*
Contact Myron Miller with any questions 574-536-6306

3075
Stihl MS170 Chainsaw
Lightly used and in good condition. Contact Bronson with any questions 574-210-3721

3060
4 Chemical Tanks*
Contact Myron Miller with any questions 574-536-6306

3061
Bartell Power Trowel*
36" Diameter, powered by a 5.5 hp Honda 6X160 engine. Works good. Contact Bronson with any questions 574-210-3721

3062
Miller Sturdi-Saw Concrete Floor Saw*
Powered by a Honda GX390 13 hp engine. Works good. Contact Bronson with any questions 574-210-3721

3063
Mikasa Sangyo Plate Compactor*
Powered by a Honda GX160 engine. Good working condition. Contact Bronson with any questions 574-210-3721

3064
Bartell Plate Compactor*
Powered by a Honda GX160 engine, in good working condition. Contact Bronson with any questions 574-210-3721

3065
Grain Tank*
3 ton capacity, free standing, leg kit and cover are included. Contact Bronson with any questions 574-210-3721

3066
Cement Forms*
18" x 48" 4 pc. fan pad cement forms. Contact Mervin with any questions 260-599-8369

3067
Honda Power Post Hole Auger*
28" Auger. Runs, throttle cable and stop switch need repaired as they are both broken from the handle. Contact Myron with any questions 574-536-6306
 

3068
Roll Case*
45" long 30" rollers, powered by an electric motor 220V. Contact Myron with any questions 574-536-6306

3069
Roll Case*
11' long 30" rollers, hydraulic powered. Contact Myron with any questions 574-536-6306

3070
Casadei EMA KS 1200 Table Saw*
53" cutting capacity, 10" blade 3 phase 220 V. Contact Myron with any questions 574-536-6306

3071
Tapco Port-O-Slitter*
In good condition. Contact Myron with any questions 574-536-6306

3072
12' Aluminum Scaffold with Ladder Jacks*
In good condition. Contact Myron with any questions 574-536-6306

3073
10.5' Tapco Mark 1 Series Metal Brake*
In good condition. Contact Myron with any questions 574-536-6306

3074
1933 Westinghouse Shop Fan*
In good working condition. Contact Bronson with any questions 574-210-3721

3076
Mile Marker Winch*
12V, working condition, includes remote control, weight rating unknown. Contact Bronson with any questions 574-210-3721

3077
Dewalt Cap/Staple Gun*
Model: DWSL18 CAP, Pneumatic power, new condition. Contact Bronson with any questions 574-210-3721

3078
Tractor Dual Tires*
Clamp on style, size 18.4-38. Contact Bronson with any questions 574-210-3721

3079
Stainless Steel Hog Feeder*
Contact Bronson with any questions 574-210-3721

3080
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3081
Stairs/Steel Warehouse Ladder*
8' high on wheels. Contact Bronson with any questions 574-210-3721

3082
Set of Axles*
5-lug, with brakes and leaf springs. Contact Bronson with any questions 574-210-3721

3083
Castors*
10" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3084
Castors*
8" diameter, 6 pieces. Contact Bronson with any questions 574-210-3721

3085
Castors*
6" diameter, 8 pieces. Contact Bronson with any questions 574-210-3721

3086
Lincoln SP-125 Plus Mig Welder*
110 powered includes tank. Good working unit in great condition. Contact Myron Miller with any questions 574-536-6306

3087
Small Pallet Racking*
(4) 5' x 48s" legs (18) 6' crossbars (3) 8' crossbars with approximately 48 support bars 48". Contact Myron Miller with any questions 574-536-6306

3088
Stackable Plastic Crates*
84 crates. 23" long x 15" wide x 10" tall. Contact Myron Miller with any questions 574-536-6306

3089
Folding Wire Baskets*
9 total. 32" long 18" wide 16" deep. Contact Myron Miller with any questions 574-536-6306

3090
Lot Feed Tote Bags*
25 bags approximately 40" x 40" x 40" used. Contact Myron Miller with any questions 574-536-6306

3091
Cooks Cat Claw Band Sharpener*
Lineshaft ready, includes 4 cams. Good working condition. Contact Myron Miller with any questions 574-536-6306

3092
Tennant 240 EH Floor Sweeper*
Battery operated, does run and operate, sells with charger. Contact Bronson with any questions 574-210-3721

3093
Curb Tec CT3000 Concrete Curb Machine*
In good working condition, powered by a Kohler engine, includes 4 different curb molds, 1 owner machine. Contact Bronson with any questions 574-210-3721

3094
Hobart ARC Welder*
PTO driven, mounted on trailer. Contact Bronson with any questions 574-210-3721

3095
Air Compressor*
Mounted on pallet, powered by 3.5 hp Honda engine. Contact Bronson with any questions 574-210-3721

3096
Crane/Excavator Mats*
Contact Bronson with any questions 574-210-3721

3097
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3098
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3099
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3100
Misc. Filters*
Air, oil, and hydraulic filters for heavy equipment. Contact Bronson with any questions 574-210-3721

3101
Misc. Parts*
Belts, brake pads, head lights, etc. Contact Bronson with any questions 574-210-3721

3102
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3103
Stainless Steel Hog Feeders*
Set of 3, 4' wide. Contact Bronson with any questions 574-210-3721

3104
Stainless Steel Hog Feeders*
Set of 2, 70" wide. Contact Bronson with any questions 574-210-3721

3105
Livestock Gates*
9 gates with waterers, approximately 9' wide. Contact Bronson with any questions 574-210-3721

3106
Boxes of Drill Bits*
Black and Decker, valve resurfacing machine. Contact Bronson with any questions 574-210-3721

3107
Delta Metal Cutting Bandsaw*
4"x6" bed. Works good. Contact Myron Miller with any questions 574-536-6306

3108
Packard Variable Speed Floor Mount Drill Press*
Works good. Contact Myron Miller with any questions 574-536-6306

3109
Sears Craftsman Combo Sander*
4" belt 6" disc sander. Works good. Contact Myron Miller with any questions 574-536-6306

3110
Fuel Tank*
4', 35" in diameter. Contact Myron Miller with any questions 574-536-6306

3111
Self Catching Pearson Headgate*
Contact Myron Miller with any questions 574-536-6306

3112
Antique Hand Powered Drill Press*
Contact Myron Miller with any questions 574-536-6306