FREE EMAIL NOTIFICATIONS
estate sales & auctions delivered to your inbox

THIS IS A COMPLETED SALE
View current listings by this company

Cabinets To Go
Listing ID#: 569123

Sale Location
Smith Drive, TN 38464

Sale Dates and TimesSALE IS COMPLETED
Tuesday Mar 28, 2023 Completed

Sale Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Email: beachyauctions@gmail.com Website: brightstarauctions.com EstateSale.com ID#: 11117 View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. Bidder Terms and Conditions These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows: IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO . Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. “Without Reserve” means Absolute. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Auction Conducted in the State of Indiana. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction. The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. X The Auction for the Personal Property is an Absolute Auction. The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Online Bids. Online bids may not be reduced or retracted. 12. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by

Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

12. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Information
Specialized Engineered Flooring line. All LIKE NEW! 00 Information Lot Engineered Hardwood Flooring Plant- Note: Notice Specs and invoices for lots in the document section of specific lots. Call if you have questions. (Opportunity of a Life Time to get like new equipment) Viewing by appointment only: Zach Kittrell 931-224-0699, Appointment is mandatory, you will not be allowed on premises if not approved ahead of time, as this is a warehouse that is an on-going business. 2350 W.O.Smith Drive, Lawrenceburg, TN 38464 Equipment Removal is 30 days and must be held strictly to that deadline. Rigging Option: Paul Avery, 270-543-1919, will have visited the plant prior to the auction. He plans to be there the day of the auction and the day after to load out any small items. He has met all insurance requirements set forth by Bright Star Auctions and Cabinets to Go. If rigging your own equipment, please provide a certificate of insurance with $1 million in liability insurance with Bright Star Auctions and Cabinets to Go as the beneficiary. Email COI to ak@brightstarauctions.com prior to removing any equipment from the premises. Contact Allison Kittrell (931-698-7058) if you have any questions with insurance requirements. 99 Abnox High Pressure Hyd. Lubrication Gun air operated 100 Mereen Johnson Machine Co. Gang Rip Saw (MJ3946) Model MJ424-DC, 75 hp motor, controls attached, laser lights. Includes wood crate of spare parts. 101 Morgan's Fabricating & Welding Company Live Rollcase 26'x 18" to the rip saw, rubber tire hold down, gear motor drive, to include box of new chain under rollcase. 102 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 103 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 104 2015 Weining Model Unimat 217 Automatic Planer & Moulder (SN: 121985), 4 head machine, controls attached 105 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 106 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 107 Cantek CFS-100 Cutoff Saw Computer Controlled Optimizing, (sn: 0617100014), 4"x12" capacity, 4" thickness capacity, 4' infeed & outfeed, controls as marked. Roll around control panel. 108 Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 109 2017 Wintersteiger 5161-310-XM Thin cutting band Quad Band Resaw DSB Twin 4 head NG 310 2XM (sn: 5161-417-0030) Model 5161-14-01 1,073 hours, weight 36,376 lbs. per unit, 5000 volt -53 machine v/ Hz. 5161-400 main drive 32 kw, voltage: To include 8'6" infeed and 8'6" outfeed rollcases, includes pallet of misc. part for machine. See detailed info from the invoice in the documents tab. 110 New Sawblades 10 boxes with 5 in each box, total 50 blades. 111 Used Sawblades Approx. 54 used blades, different saw styles. Does not include racks in photo. 112 (6) Portable Saw Racks Does not include saw blades in the photo. 113 Portable Saw Rack Check back for updates and pictures. 114 Portable Saw Rack Check back for updates and pictures. 119 Material Rack 5'x2', Portable. 115 Portable Saw Rack Check back for updates and pictures. 120 2017 Costa Levigatrici SK Sander 3 head, 54" wide, model SK-5 CCT1350, (sn: LP156002A), weight 3200 kg, (does not include fire extinguisher) 116 Portable Saw Rack Check back for updates and pictures. 128 Rip Saw 60" wide, multi rip saw for plywood, 1.5" thickness capacity, includes 50 hp motor, 6'x60" infeed rollcase with rubber tire feed system, (2) preset up saw arbors, console controls as marked 117 Portable Saw Rack Check back for updates and pictures. 129 Morgan's Fabricating & Welding Company Infeed System to Rip Saw Automatic, 6" 3 strand package deck with roller type chain, gear motor drive, to an 8'x4' scissor lift with gravity rolls, push button operated, 11' rolling chain type feeder to infeed deck for rip saws, all controls attached 118 Portable Saw Rack Check back for updates and pictures. 130 Morgan's Fabricating & Welding Company Outfeed Rollcase from Rip Saw 10'x60", (16) 3" rubber coated rolls, laser light stops, Baldor gear motor drive, controls attached 131 2002 Costa Levigatrici CTC1350 Belt Sander (SN: A20320AC2), bottom calibrating sanding, 3 head belt sander with controls as marked. To include 2002 FLLI Ferrai Vacuum Blower, type ELVEFC, 38", 716-P4A-RD-1325A/2P 132 Morgan's Fabricating & Welding Company Belt Conveyor 11'x54", gear motor drive 133 2005 Costa Levigatrici KA CCT1350 Sander 3 head, 52" wide capacity, top calibrating, weight 4000 kg, controls attached to include 24" Vacuum blower, 5.5 hp motor, no infeed/outfeed pipe included. Does not include fire extinguisher. 135 Morgan's Fabricating & Welding Company Belt Conveyor 11' 6"x54", gear motor drive, controls attached 136 Morgan's Fabricating & Welding Company Rollcase Part of Entirety. 9'6"x60", (16) 3" diameter rubber coated rolls, to include 13' 3 strand pop up transfer with 3" plastic chain, gear motor drive, motor controls attached, and stand along control console. 137 Overhead Heat Lamp System Part of Entirety. (3) heat lamps to include electric panel as marked. No inlet wire included. Includes only wire from box to lights 138 2017 Union Tool Corp Glue System Part of Entirety. 15-C-14" HM RC, (sn: 21131), 138A (1) Nordson Glue Melter Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine. Type XV-460-57TQB-1-1R-4 (sn: 101000018235) 138B (1) Nordson Glue Melter Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine Type XV-460-57TQB-1-1R-4 (sn: 101000018234) 140 Morgan's Fabricating & Welding Company Infeed Transfer Deck Part of Entirety. 9' 3 strand 55" arms with rubber chain, gear motor drive, power feed roll 141 Morgan's Fabricating & Welding Company Veneer Placement Table Part of Entirety. 12'x18". 142 Morgan's Fabricating & Welding Company Glue Press Roll System Part of Entirety. 30', 15" rolls, air hold downs, controls as marked, no outlet wire included cut 6" above box 143 Glue Line Entirety Lots 136-142 with a 10% raise to open the bid. 139 Drums of Adhesive 55 gallon, (11). Check back for updates and pictures. 144 Morgan's Fabricating & Welding Company Belt Conveyor 12'6"x12', gear motor drive, controls attached 145 Nordson Altablue 16TT Filler Station/Handgun System (SN: NC18C00652) includes melting pot, (2) applicator guns, (LU17H40674), controls as marked 146 Morgan's Fabricating & Welding Company Belt Conveyor 25'x50", gear motor drive, controls attached, emergency stop 147 Morgan's Fabricating & Welding Company Belt Conveyor 25'x84", gear motor drive, controls attached, emergency stop 148 Morgan's Fabricating & Welding Company Belt Conveyor 10'6"x84", gear motor drive, controls attached 149 Morgan's Fabricating & Welding Company Transfer Rollcase 10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand transfer deck with 3" plastic chain, gear reduction drive, controls as marked, stand alone console. 150 Morgan's Fabricating & Welding Company Belt Conveyor 12'x54", gear reduction drive, controls attached 151 HOLZHER Kundig Brilliant 2-53RCd Wide Belt Sander (sn: 27227), 54" capacity, 3 head 152 Morgan's Fabricating & Welding Company Belt Conveyor 12'x54", outfeed to sander, gear motor drive, controls attached 153 Morgan's Fabricating & Welding Company Rollcase 10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand jump up transfer deck with 3" plastic chain, gear reduction drive, controls attached with push button control panel 154 2017 Weining Unimat 818S Automatic Planer & Moulder (SN: C04146) 6 head machine, 12" capacity, Machine #123655, controls as marked. To include pipe to manifold an manifold to 1st corrugated pipe. 155 Infeed Table 9' with power roll includes 3 strand 56" transfer with 3" plastic chain, controls attached. 156 Morgan's Fabricating & Welding Company Belt Conveyor 7'6"x12", outfeed, gear motor drive 157 Morgan's Fabricating & Welding Company Belt Conveyor 23'x9" within the 23' is a 6' incline sections, gear motor drive, controls attached 158 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 159 Cantek CFS-100 Cutoff Saw Computer Controlled Optimizing, (sn: 0617100015), 4"x12" capacity, 4" thickness capacity, 4' infeed & 40" outfeed, controls as marked 159A Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 160 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", infeed, gear motor drive, controls attached.(16) 161 Morgan's Fabricating & Welding Company Belt Conveyor 16'x12", outfeed, gear motor drive, controls attached.(17) 162 Morgan's Fabricating & Welding Company Belt Conveyor 16'x96", incline, gear motor drive, controls attached. (18) 163 Hasko MPEN-C-33-O-LP End Matcher Head Serial number (sn: 1770004-G) (sn: 170004-T) 94" wide bed, 24' bed overall length, includes control panel 164 Hytrol Waste Conveyor Incline, 7'x12" slat belt, gear motor drive 159B Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 165 Hytrol Waste Conveyor Incline, 7'x12" slat belt, gear motor drive 166 Morgan's Fabricating & Welding Company Belt Conveyor Incline, 12'x36" gear motor drive, controls attached. 167 Morgan's Fabricating & Welding Company Belt Conveyor 20'x8', gear motor drive, controls attached. 169 2017 Costa Levigatrici Serie K Hand Scraper & Vacuum blower K7YYC1350, (sn:LB731024A), 54" wide, 2 heads, does saw marks and hand scrap. Cleaning brush, 2017 36" Type FB716P4SLG0, no inlet/outlet pip included. 171 Morgan's Fabricating & Welding Company Scissor Lift 17'x42", 8,000 capacity, foot operated 172 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 173 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 174 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 175 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated* 176 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated. * 177 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated.* 200 Timesavers 23 Series Sander 1st Log of Entirety. Model 2341-45-001, 4 head, wide belt, 52" capacity, controls as attached. (sn: 33656) (Corp Label B1) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe. 201 Morgan's Fabricating & Welding Company Belt Conveyor Part of Entirety. 9'6"x54", gear motor drive, controls attached. 203 2017 Infinity 4S1350 Deduster Part of Entirety. 4 brush, 53" wide, (sn: AB-0121) mfg. date 8/17, controls attached. (Corp Label C1). To include vacuum blower, 26", 7.5 hp motor, no motor controls, Pipe to machine, no outlet pipe. 205 Stanza Machinery Company Applicator Part of Entirety. STM, Model STR52-2, (sn: 171509) 2 station, 52" wide capacity, controls attached, control panel. (Corp Label: D1). 206 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171531), 6'x52" controls attached, seamless rubber belt. (Corp. Label 3). 207 2017 Infinity IS 1350 Alpha Brush Buffer Part of Entirety. Single head (sn: AB-125), 53" pass through belt, control panel, mfg. 8/17. (Corp. label E1). To include 22" vacuum blower, Model HP-6C-22. Pipe to machine only, no outlet pipe included. 209 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-3, (sn: 171510), control console included. To include 22" Vacuum blower, Model HP-6C-22 (Corp. label F1). 210 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-3, (sn: 171516), 3 lamp, (Corp. label GI). 211 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, Model STC52-1, (sn: 171534), 36"x52", controls attached, seamless rubberized belt, (Corp. label 4). 211A 1st Sander Line entirety lots 200-211 tied together with a 10% raise to open the bid. 212 2017 Infinity, 3 head Buffer Part of Entirety. Control panel as marked. (sn: AB-0122) C2 Corp label. To include 22" vacuum blower, no inlet/outlet pipe included. 213 Stanza Machinery Company Belt Conveyor Part of Entirety. Model STC52-2, (sn: 171522), 6'x52", controls attached, seamless rubberized belt, (Corp. label 5). 214 Stanza Machinery Company Applicator Part of Entirety. Model STF52-1, (sn: 171514), Single, controls attached, (Corp. label D2). 215 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 1715112), 36"x52", controls attached, seamless rubberized belt, (Corp. label 6). 216 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-3, (sn: 171511) 52", 3 lamp, controls attached, (Corp. label G2). 217 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, STC52-1, (sn: 171515), 3'x52" controls attached, seamless rubberized belt, (Corp. label 7). 216A Sander line #2 Entirety Lots 212-216 tied together with a 10% raise to open the bid. 218 2017 Infinity 3S1350 Buffer Part of Entirety. Alpha Brush (sn: AB-0123) with vacuum blower, (Corp. label C3). 219 Stanza Machinery Company Belt Conveyor Part of Entirety. Model STC52-2, (sn: 171526), 6'x52", controls attached, seamless rubberized belt, (Corp. label 8) 220 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, single, control console attached. (Corp. Label D3). 221 Electric Box Part of Entirety. No wire or conduit included. 222 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171530), 3'x52" controls attached, seamless rubberized belt, (Corp. label 9). 223 Stanza Machinery Company UV Oven Part of Entirety. Model ST052-1, (sn: 171521) 52", 2 lamp, controls attached. (Corp. Label G3). 224 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171518), 6'x52" controls attached, seamless rubber belt. (Corp. Label 10). 225 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171523), single, control console attached. (Corp. Label D4) 226 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171520), 3'x52", controls attached, seamless rubberized belt. (Corp. label: (11). 227 Stanza Machinery Company UV Oven Part of Entirety. Model ST052-2, (sn: 1715253), 2 lamp, controls attached. (Corp. Label G4). 228 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, 6'x52" controls attached, seamless rubberized belt. (Corp. label 12). 229 Stanza Machinery Company Applicator Part of Entirety. STM,model STR52-1, (sn: 171527), single head. (Corp. label D5). 230 Infinity Alpha Brush Buffer Part of Entirety. (sn: AB-0124), With vacuum blower. (Corp. label E2). 231 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-2,(sn: 171540), control console included. (Corp. label F2). 232 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-4, (sn: 171529), 4 lamp, controls attached, (Corp. label G5) 233 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171517), 3'x52", seamless rubberized belt, controls attached. (Corp. label 13) 233A Entirety Lot of 1st line only Lots 200-233 with 10% raise to open the bid. 234 Timesavers 23 Series Sander 1st Lot of Entirety. Model 2321-23-11, (sn: 33868), double head, wide belt, 52" capacity, controls as attached. (Corp Label B2) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe. 235 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171532), 6'x52", seamless rubberized belt, controls attached. (Corp. label 14). 236 Infinity 4S 1350 Alpha Brush Deduster Part of Entirety. (SN: AB0127 ) 4 head with vacuum blower. (Corp. label C4). 237 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171536), 6'x52", seamless rubberized belt, controls attached. (Corp. label 15). Part of Entirety. 238 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 177537), single head. (Corp. label D6). 239 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171524), 6'x52", seamless rubberized belt, controls attached. (Corp. label 16). 240 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-2, (sn: 171525), 2 lamp, controls attached, (Corp. label G6). 241 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-4, (sn: 1715238), 6'x52", seamless rubberized belt, controls attached. (Corp. label 17) 242 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7). 243 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, Model STC52-2, (sn: 171513), 6'x52", seamless rubberized belt, controls attached. (Corp. label 18). 244 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7). 245 Infinity 1S 1350 Alpha Brush Buffer Part of Entirety. (SN:AB-0126) with vacuum blower. (Corp. label E3). 246 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-5, (sn: 171528),control console included. (Corp. label C5). 247 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171508) 6'x52", seamless rubberized belt, controls attached. (Corp. label 19 ). 248 Stanza Machinery Company UV Oven Part of Entirety. STM,model ST052-4, (sn: 171542), 4 lamp, controls attached, (Corp. label G7). 249 Finishing Line Entirety of 2nd line Lots 234-249 with a 10% raise to open the bid 250 Morgan's Fabricating & Welding Company Belt Conveyor 44"x48", standard rubber belt, controls attached. (Corp. label 20). Part of Master Tie back. 251 Morgan's Fabricating & Welding Company Belt Conveyor 40"x84", standard rubber belt, controls attached. (Corp. label ). Part of Master Tie Back 280 Finishing Line Master Entirety Lots 200-280 with a 10% raise to open the bid. 281 Storage Cabinet (2) flammable liquid units 290 2015 Ruf Brick Machine System Machine # 2410, RUF1100 Plus, 480/3PH- 100 hp. weight 13,200 lbs. 550 hours, 230,114 bricks made. Makes compressed fire bricks out of sawdust. Includes hydraulic system, motor controls attached. Does not include dust pipe or infeed hopper system. Does not include pallets of fire bricks. Contact Allison 93-698-7058 , if interested in purchasing a pallet of fire brick. 290A 6'x28" Belt Conveyor With steel sides, gear motor drive, controls attached, foot controller. 291 Belt Conveyor Approx 36' stainless steel 12", gear motor drive, support to ground to include loading bin for brickette machine. 292 Stainless Steel Conveyor 75'x12" with gear motor drive, support to the ground. Includes 2 spare sections on conveyor frame. Located outside on the ground. 300 AirCon Dust System #1 1st lot in entirety, 13' diameter bag house , controls marked #1. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on left when facing the building) 252 New parts in crate Details and Pictures to follow. Part of Master Tie Back 301 Daniels Fans Blower Part of Entirety. B1F930, Order # 1707736, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe. 302 Siemens Motor Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect. 303 Soft Start Starter Part of Entirety. Used for 150 hp blower motor. Marked for #1 Dust System. On back wall. 305 Dust Pipe Part of Entirety. For Dust system #1 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.38" (sn: 037-010095-001) (sn: 037-010096-001). 306 Dust System #1 Entirety Lots 300-305 tied together with a 10% raise to open the bid. 310 AirCon Dust System #2 1st lot in entirety, 13' diameter bag house , controls marked #2. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on right when facing the building) 311 Daniels Fans Blower Part of Entirety. B1E930, Order # 1707737, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe. 312 Siemens Motor Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect. 313 Soft Start Starter Part of Entirety. Used for 150 hp blower motor. Marked for #2 Dust system. Located on back wall. 315 Dust Pipe Part of Entirety. For Dust system #2 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.36" (sn: 037-010097-001) (sn: 037-010094-001). Does Not Include manifold or pope for Weinig 6 Head Molder 304 Soft Start Starter Part of entirety 316 Dust System #2 Entirety Lots 310-315 tied together with a 10% raise to open the bid. 317 Ladder and Catwalk Part of Entirety. System for Dust System #1 and #2 318 Clarke's Pyro Guard Spark Detection and Fire Suppressor System Part of Entirety. To include control boxes and sensors in and on the dust pipe system. 319 Hyfab MVP Sprinkler System Part of Entirety. Model MVP-850-460, Product- PRD-21498-01 for dust system. 320 AirCon Corp. Dust Transfer Part of Entirety. For loading system to include AirCon Corp. Pneumatic Conveying Systems blower with 25 hp motor, Siemens60 amp disconnect. Approx. 130' 16" infeed and outfeed dust pipe, (2) Clarke's ERO star type feeders, (2) Clarke's dual automatic loading chutes. Disconnect pipe at trailer. 325 Dust System Master Entirety Lots 300-321 tied together with a 10% raise to open the bid. 318A Allen Bradley Motor Control Box 326 2017 Atlas Air Copco Compressor GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect. (sn: AP1671180). Built in 100 hp Air Dryer System (sn: 1TJ022168) In locked room in back of warehouse. 314 Soft Start Starter Part of entirety 327 2017 Atlas Copco Air Compressor GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect (sn: Ap1671357). Built in Air Dryer 100 hp system. Located in locked room in back of warehouse. 328 Atlas Copco Air Dryer Model 0SC825, Quality Air Solutions 329 Reserve Air Tank 165 PSI, Disconnect at 1st joint. No pipe. Located at back of warehouse. 330 2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer Model SFS-45, (VIN 1Z92B452JT199278), mfg. date-9/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back. Does include the doors that are leaning against the building. 331 Morgans Fabricating & Welding Co. Dust Unloading System 92"x110" dust bin, 12'x14" auger system, controls as marked 333 2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer Model SFS-45, (VIN 1Z92B4522JT19950), mfg. date-907/17/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back, Does include Door that are leaning against the building. 334 Morgans Fabricating & Welding Co. Dust Unloading System 92"x110" dust bin, 12'x14" auger system, controls as marked 321 Soft Start Starter inside, details to coming soon. 334A 15 hp Hydraulic Unit* operates the two walking floor trailers includes motor controls attached and hydraulic hoses to trailers. 335 Motor Control Panel For Trailer Dust System to include 100 amp safety. 340 Siemens Switch Board 1st lot of entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330. 341 Aluminum Wire Tray Part of Entirety. 480' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line. 328 Air Compressor Details to follow 342 2017 Spectra Series Busway 3000 amp To include (30) 10' bus sections, (41) misc. size disconnects. All installed in 2017. 329 Air Compressor Details to follow 343 Siemens Switch Board Part of Entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330. 344 Aluminum Wire Tray Part of Entirety. 340' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line. 345 2017 Spectra Series Busway 3000 amp Part of Entirety. To include (30) 10' bus sections, (39) misc. size disconnects. All installed in 2017. 346 Wire Part of Entirety. From Individual Equipment to disconnects. 347 Electrical Entirety Lot 340-346 Tied together with 10% raise to open the bid. 348 Spectra Series Busway (10) 10' sections of spares, 3000 amp. Uninstalled. Most are used and some say "bad". 349 Aluminum Wire (15) partial rolls of Camerony 750 MCM, 600 volt. 349A Electrical To include New Buss Bar Electric boxes, various sizes. 350 Pallet of Rip Saw blades (13) plywood rip saw blades, (1) hogger blade 351 Weining Heads To include 10" planner segmented knives, 6" head segmented knives, 1 1/2" box of segment teeth, (2) 1/2" tongue side head, (2) 1/2" groove side head, (1) 3/4" grove side head, (2) 3/8" groove side head, (2) 3/8" tongue side head, (1) 3/4" tonue side head. 352 Weining Moulder Parts On pallet to include rollers, segmented wheels, (2) setting devices, (4) guards. 353 End Matcher Heads On pallet to include (1) Tongue bottom score, 3/8", 1/2" , 3/4", (1) Groove trim bevel, (2) Tongue bottom bevel profile 3/8", 1/2" , (1) Tongue top score, 3/8", 3/4", 1/2", (2) Groove bottom bevel profile 3/8", 1/2", (1) Groove bottom bevel profile 3/4", (1) Tongue trim bevel 3/8", 3/4", 1/2", (1) Tongue bottom bevel profile 3/4". 354 Plastic Belt for Hasko Endmatcher 36", (www.reginachain.net), box of chain segments on pallet. 355 New/Used Air Regulators And wheels on pallet. 356 Mostly New Speed Drives On pallet 357 Various Motors/Gear Boxes On Pallet to include (1) Baldor .75 hp motor, (2) DR roller/conveyor gear boxes, (1) 1.75KW Siemens Motor, Sirocco Fan Model KL750, (1) applicator roller gear box, (1)Symons applicator roller motor, (1) Dayton 1/30 hp blower motor, (2) gear boxes, (1) .86 KW motor. 358 New/Used Misc. Parts On pallet. 359 (2) pallet of Nordson Glue Parts And Defect Filler, includes hoses, guns, and end dams. 360 Misc. Bearing On pallet to include (4) dust collection Dodge Pillow Block bearing for dust collector van. 361 (3) Grease Guns and Grease 362 Misc. New/Used Parts To include sprockets, (3) boxes of sand paper for hand scraper. 363 Parts for Chop Saw to include glue roll on pallet. 364 Pallet of Chain To include paddle chain for 12" dust conveyors, (1) box of specialized roller chain. 365 Pallet of Belts Various sizes. 366 Pallet of Motors to include (1) 15 hp motor, Dodge Speed reducer, 5.5 KW motor, and air valve. 367 Rubber Belting For Glue Line equipment on pallet. 368 (3) Pallets of Dust Collector Pipe 369 Capacitor New, 15 KW. 370 Pallet of Misc. To include lift gate and guards. 371 Box of 3M Buffer New. 372 (3) 54" Rubber Belting New. 373 (4) 6' West Rock Rubberized Belting New. 374 Glue Roller 6"x14" 375 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 376 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 377 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 378 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 379 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 380 Glue Roller 37"x15"x15" 381 Roller for Timesaver 54"x6" 382 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 383 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 384 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 385 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 386 Rollers for Conveyors (1) 97"x8", (1) 55"x8", (1) 37"x3" 387 Roller for Costa ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end. 388 Crate of Costa Rollers to include (1) ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end, (8) 58"x3" rolls, mm62x73x14.70, Disigno 12DA03780. 389 54" Costa VSL1212.7 Feed Belt in crate. 390 (2) New Stanza Buff Rollers in crate. 391 (2) Finzer Buff Rollers Part 36354164-4 in crates. 392 Finzer Rubber Coated Roller 57"x10" 393 Finzer Chrome Roller 57"x6" 394 Finzer Sponge Roller 57"x10" 395 Crate of Costa Parts To include guard. 396 Costa Parts in Crate To include New Feed belt VSL008722, (2) 57"x3" Chrome Rollers 397 (4) Costa Chrome Rollers 56"x6" in crate 398 Costa Used Roller with guards 54"x8" 399 CATO-CT02 Recover OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 400 Sand Paper All pallets to include 52"x103", 52"x75", 53"x 128" various grit. In boxes and on rack. Does not include rack. 401 Misc. parts To include roll and guard.

Listing Information

Specialized Engineered Flooring line. All LIKE NEW!

Information Lot

Engineered Hardwood Flooring Plant- Note: Notice Specs and invoices for lots in the document section of specific lots. Call if you have questions.

(Opportunity of a Life Time to get like new equipment)

Viewing by appointment only: Zach Kittrell 931-224-0699, Appointment is mandatory, you will not be allowed on premises if not approved ahead of time, as this is a warehouse that is an on-going business.

2350 W.O.Smith Drive, Lawrenceburg, TN 38464

Equipment Removal is 30 days and must be held strictly to that deadline.

Rigging Option: Paul Avery, 270-543-1919, will have visited the plant prior to the auction. He plans to be there the day of the auction and the day after to load out any small items. He has met all insurance requirements set forth by Bright Star Auctions and Cabinets to Go.

If rigging your own equipment, please provide a certificate of insurance with $1 million in liability insurance with Bright Star Auctions and Cabinets to Go as the beneficiary. Email COI to ak@brightstarauctions.com prior to removing any equipment from the premises. Contact Allison Kittrell (931-698-7058) if you have any questions with insurance requirements.

Abnox High Pressure Hyd. Lubrication Gun
air operated

100

Mereen Johnson Machine Co. Gang Rip Saw
(MJ3946) Model MJ424-DC, 75 hp motor, controls attached, laser lights. Includes wood crate of spare parts.

101

Morgan's Fabricating & Welding Company Live Rollcase
26'x 18" to the rip saw, rubber tire hold down, gear motor drive, to include box of new chain under rollcase.

102

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

103

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

104

2015 Weining Model Unimat 217 Automatic Planer & Moulder
(SN: 121985), 4 head machine, controls attached

105

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

106

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

107

Cantek CFS-100 Cutoff Saw
Computer Controlled Optimizing, (sn: 0617100014), 4"x12" capacity, 4" thickness capacity, 4' infeed & outfeed, controls as marked. Roll around control panel.

108

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

109

2017 Wintersteiger 5161-310-XM Thin cutting band Quad Band Resaw

DSB Twin 4 head NG 310 2XM (sn: 5161-417-0030) Model 5161-14-01 1,073 hours, weight 36,376 lbs. per unit, 5000 volt -53 machine v/ Hz. 5161-400 main drive 32 kw, voltage: To include 8'6" infeed and 8'6" outfeed rollcases, includes pallet of misc. part for machine. See detailed info from the invoice in the documents tab.

110

New Sawblades
10 boxes with 5 in each box, total 50 blades.

111

Used Sawblades
Approx. 54 used blades, different saw styles. Does not include racks in photo.

112

(6) Portable Saw Racks
Does not include saw blades in the photo.

113

Portable Saw Rack
Check back for updates and pictures.

114

Portable Saw Rack
Check back for updates and pictures.

119

Material Rack
5'x2', Portable.

115

Portable Saw Rack
Check back for updates and pictures.

120

2017 Costa Levigatrici SK Sander
3 head, 54" wide, model SK-5 CCT1350, (sn: LP156002A), weight 3200 kg, (does not include fire extinguisher)

116

Portable Saw Rack
Check back for updates and pictures.

128

Rip Saw
60" wide, multi rip saw for plywood, 1.5" thickness capacity, includes 50 hp motor, 6'x60" infeed rollcase with rubber tire feed system, (2) preset up saw arbors, console controls as marked

117

Portable Saw Rack
Check back for updates and pictures.

129

Morgan's Fabricating & Welding Company Infeed System to Rip Saw
Automatic, 6" 3 strand package deck with roller type chain, gear motor drive, to an 8'x4' scissor lift with gravity rolls, push button operated, 11' rolling chain type feeder to infeed deck for rip saws, all controls attached

118

Portable Saw Rack
Check back for updates and pictures.

130

Morgan's Fabricating & Welding Company Outfeed Rollcase from Rip Saw
10'x60", (16) 3" rubber coated rolls, laser light stops, Baldor gear motor drive, controls attached

131

2002 Costa Levigatrici CTC1350 Belt Sander
(SN: A20320AC2), bottom calibrating sanding, 3 head belt sander with controls as marked. To include 2002 FLLI Ferrai Vacuum Blower, type ELVEFC, 38", 716-P4A-RD-1325A/2P

132

Morgan's Fabricating & Welding Company Belt Conveyor
11'x54", gear motor drive

133

2005 Costa Levigatrici KA CCT1350 Sander
3 head, 52" wide capacity, top calibrating, weight 4000 kg, controls attached to include 24" Vacuum blower, 5.5 hp motor, no infeed/outfeed pipe included. Does not include fire extinguisher.

135

Morgan's Fabricating & Welding Company Belt Conveyor
11' 6"x54", gear motor drive, controls attached

136

Morgan's Fabricating & Welding Company Rollcase
Part of Entirety. 9'6"x60", (16) 3" diameter rubber coated rolls, to include 13' 3 strand pop up transfer with 3" plastic chain, gear motor drive, motor controls attached, and stand along control console.

137

Overhead Heat Lamp System
Part of Entirety. (3) heat lamps to include electric panel as marked. No inlet wire included. Includes only wire from box to lights

138

2017 Union Tool Corp Glue System
Part of Entirety. 15-C-14" HM RC, (sn: 21131),

138A

(1) Nordson Glue Melter
Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine. Type XV-460-57TQB-1-1R-4 (sn: 101000018235)

138B

(1) Nordson Glue Melter
Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine Type XV-460-57TQB-1-1R-4 (sn: 101000018234)

140

Morgan's Fabricating & Welding Company Infeed Transfer Deck
Part of Entirety. 9' 3 strand 55" arms with rubber chain, gear motor drive, power feed roll

141

Morgan's Fabricating & Welding Company Veneer Placement Table
Part of Entirety. 12'x18".

142

Morgan's Fabricating & Welding Company Glue Press Roll System
Part of Entirety. 30', 15" rolls, air hold downs, controls as marked, no outlet wire included cut 6" above box

143

Glue Line Entirety
Lots 136-142 with a 10% raise to open the bid.

139

Drums of Adhesive
55 gallon, (11). Check back for updates and pictures.

144

Morgan's Fabricating & Welding Company Belt Conveyor
12'6"x12', gear motor drive, controls attached

145

Nordson Altablue 16TT Filler Station/Handgun System
(SN: NC18C00652) includes melting pot, (2) applicator guns, (LU17H40674), controls as marked

146

Morgan's Fabricating & Welding Company Belt Conveyor
25'x50", gear motor drive, controls attached, emergency stop

147

Morgan's Fabricating & Welding Company Belt Conveyor
25'x84", gear motor drive, controls attached, emergency stop

148

Morgan's Fabricating & Welding Company Belt Conveyor
10'6"x84", gear motor drive, controls attached

149

Morgan's Fabricating & Welding Company Transfer Rollcase
10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand transfer deck with 3" plastic chain, gear reduction drive, controls as marked, stand alone console.

150

Morgan's Fabricating & Welding Company Belt Conveyor
12'x54", gear reduction drive, controls attached

151

HOLZHER Kundig Brilliant 2-53RCd Wide Belt Sander
(sn: 27227), 54" capacity, 3 head

152

Morgan's Fabricating & Welding Company Belt Conveyor
12'x54", outfeed to sander, gear motor drive, controls attached

153

Morgan's Fabricating & Welding Company Rollcase
10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand jump up transfer deck with 3" plastic chain, gear reduction drive, controls attached with push button control panel

154

2017 Weining Unimat 818S Automatic Planer & Moulder
(SN: C04146) 6 head machine, 12" capacity, Machine #123655, controls as marked. To include pipe to manifold an manifold to 1st corrugated pipe.

155

Infeed Table
9' with power roll includes 3 strand 56" transfer with 3" plastic chain, controls attached.

156

Morgan's Fabricating & Welding Company Belt Conveyor
7'6"x12", outfeed, gear motor drive

157

Morgan's Fabricating & Welding Company Belt Conveyor
23'x9" within the 23' is a 6' incline sections, gear motor drive, controls attached

158

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

159

Cantek CFS-100 Cutoff Saw
Computer Controlled Optimizing, (sn: 0617100015), 4"x12" capacity, 4" thickness capacity, 4' infeed & 40" outfeed, controls as marked

159A

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

160

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", infeed, gear motor drive, controls attached.(16)

161

Morgan's Fabricating & Welding Company Belt Conveyor
16'x12", outfeed, gear motor drive, controls attached.(17)

162

Morgan's Fabricating & Welding Company Belt Conveyor
16'x96", incline, gear motor drive, controls attached. (18)

163

Hasko MPEN-C-33-O-LP End Matcher
Head Serial number (sn: 1770004-G) (sn: 170004-T) 94" wide bed, 24' bed overall length, includes control panel

164

Hytrol Waste Conveyor
Incline, 7'x12" slat belt, gear motor drive

159B

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

165

Hytrol Waste Conveyor
Incline, 7'x12" slat belt, gear motor drive

166

Morgan's Fabricating & Welding Company Belt Conveyor
Incline, 12'x36" gear motor drive, controls attached.

167

Morgan's Fabricating & Welding Company Belt Conveyor
20'x8', gear motor drive, controls attached.

169

2017 Costa Levigatrici Serie K Hand Scraper & Vacuum blower
K7YYC1350, (sn:LB731024A), 54" wide, 2 heads, does saw marks and hand scrap. Cleaning brush, 2017 36" Type FB716P4SLG0, no inlet/outlet pip included.

171

Morgan's Fabricating & Welding Company Scissor Lift
17'x42", 8,000 capacity, foot operated

172

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

173

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

174

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

175

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated*

176

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated. *

177

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated.*

200

Timesavers 23 Series Sander
1st Log of Entirety. Model 2341-45-001, 4 head, wide belt, 52" capacity, controls as attached. (sn: 33656) (Corp Label B1) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe.

201

Morgan's Fabricating & Welding Company Belt Conveyor
Part of Entirety. 9'6"x54", gear motor drive, controls attached.

203

2017 Infinity 4S1350 Deduster
Part of Entirety. 4 brush, 53" wide, (sn: AB-0121) mfg. date 8/17, controls attached. (Corp Label C1). To include vacuum blower, 26", 7.5 hp motor, no motor controls, Pipe to machine, no outlet pipe.

205

Stanza Machinery Company Applicator
Part of Entirety. STM, Model STR52-2, (sn: 171509) 2 station, 52" wide capacity, controls attached, control panel. (Corp Label: D1).

206

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171531), 6'x52" controls attached, seamless rubber belt. (Corp. Label 3).

207

2017 Infinity IS 1350 Alpha Brush Buffer
Part of Entirety. Single head (sn: AB-125), 53" pass through belt, control panel, mfg. 8/17. (Corp. label E1). To include 22" vacuum blower, Model HP-6C-22. Pipe to machine only, no outlet pipe included.

209

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-3, (sn: 171510), control console included. To include 22" Vacuum blower, Model HP-6C-22 (Corp. label F1).

210

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-3, (sn: 171516), 3 lamp, (Corp. label GI).

211

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, Model STC52-1, (sn: 171534), 36"x52", controls attached, seamless rubberized belt, (Corp. label 4).

211A

1st Sander Line entirety
lots 200-211 tied together with a 10% raise to open the bid.

212

2017 Infinity, 3 head Buffer
Part of Entirety. Control panel as marked. (sn: AB-0122) C2 Corp label. To include 22" vacuum blower, no inlet/outlet pipe included.

213

Stanza Machinery Company Belt Conveyor
Part of Entirety. Model STC52-2, (sn: 171522), 6'x52", controls attached, seamless rubberized belt, (Corp. label 5).

214

Stanza Machinery Company Applicator
Part of Entirety. Model STF52-1, (sn: 171514), Single, controls attached, (Corp. label D2).

215

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 1715112), 36"x52", controls attached, seamless rubberized belt, (Corp. label 6).

216

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-3, (sn: 171511) 52", 3 lamp, controls attached, (Corp. label G2).

217

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, STC52-1, (sn: 171515), 3'x52" controls attached, seamless rubberized belt, (Corp. label 7).

216A

Sander line #2 Entirety
Lots 212-216 tied together with a 10% raise to open the bid.

218

2017 Infinity 3S1350 Buffer
Part of Entirety. Alpha Brush (sn: AB-0123) with vacuum blower, (Corp. label C3).

219

Stanza Machinery Company Belt Conveyor
Part of Entirety. Model STC52-2, (sn: 171526), 6'x52", controls attached, seamless rubberized belt, (Corp. label 8)

220

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, single, control console attached. (Corp. Label D3).

221

Electric Box
Part of Entirety. No wire or conduit included.

222

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171530), 3'x52" controls attached, seamless rubberized belt, (Corp. label 9).

223

Stanza Machinery Company UV Oven
Part of Entirety. Model ST052-1, (sn: 171521) 52", 2 lamp, controls attached. (Corp. Label G3).

224

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171518), 6'x52" controls attached, seamless rubber belt. (Corp. Label 10).

225

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171523), single, control console attached. (Corp. Label D4)

226

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171520), 3'x52", controls attached, seamless rubberized belt. (Corp. label: (11).

227

Stanza Machinery Company UV Oven
Part of Entirety. Model ST052-2, (sn: 1715253), 2 lamp, controls attached. (Corp. Label G4).

228

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, 6'x52" controls attached, seamless rubberized belt. (Corp. label 12).

229

Stanza Machinery Company Applicator
Part of Entirety. STM,model STR52-1, (sn: 171527), single head. (Corp. label D5).

230

Infinity Alpha Brush Buffer
Part of Entirety. (sn: AB-0124), With vacuum blower. (Corp. label E2).

231

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-2,(sn: 171540), control console included. (Corp. label F2).

232

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-4, (sn: 171529), 4 lamp, controls attached, (Corp. label G5)

233

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171517), 3'x52", seamless rubberized belt, controls attached. (Corp. label 13)

233A

Entirety Lot of 1st line only
Lots 200-233 with 10% raise to open the bid.

234

Timesavers 23 Series Sander
1st Lot of Entirety. Model 2321-23-11, (sn: 33868), double head, wide belt, 52" capacity, controls as attached. (Corp Label B2) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe.

235

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171532), 6'x52", seamless rubberized belt, controls attached. (Corp. label 14).

236

Infinity 4S 1350 Alpha Brush Deduster
Part of Entirety. (SN: AB0127 ) 4 head with vacuum blower. (Corp. label C4).

237

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171536), 6'x52", seamless rubberized belt, controls attached. (Corp. label 15). Part of Entirety.

238

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 177537), single head. (Corp. label D6).

239

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171524), 6'x52", seamless rubberized belt, controls attached. (Corp. label 16).

240

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-2, (sn: 171525), 2 lamp, controls attached, (Corp. label G6).

241

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-4, (sn: 1715238), 6'x52", seamless rubberized belt, controls attached. (Corp. label 17)

242

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7).

243

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, Model STC52-2, (sn: 171513), 6'x52", seamless rubberized belt, controls attached. (Corp. label 18).

244

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7).

245

Infinity 1S 1350 Alpha Brush Buffer
Part of Entirety. (SN:AB-0126) with vacuum blower. (Corp. label E3).

246

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-5, (sn: 171528),control console included. (Corp. label C5).

247

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171508) 6'x52", seamless rubberized belt, controls attached. (Corp. label 19 ).

248

Stanza Machinery Company UV Oven
Part of Entirety. STM,model ST052-4, (sn: 171542), 4 lamp, controls attached, (Corp. label G7).

249

Finishing Line Entirety of 2nd line
Lots 234-249 with a 10% raise to open the bid

250

Morgan's Fabricating & Welding Company Belt Conveyor
44"x48", standard rubber belt, controls attached. (Corp. label 20). Part of Master Tie back.

251

Morgan's Fabricating & Welding Company Belt Conveyor
40"x84", standard rubber belt, controls attached. (Corp. label ). Part of Master Tie Back

280

Finishing Line Master Entirety
Lots 200-280 with a 10% raise to open the bid.

281

Storage Cabinet
(2) flammable liquid units

290

2015 Ruf Brick Machine System
Machine # 2410, RUF1100 Plus, 480/3PH- 100 hp. weight 13,200 lbs. 550 hours, 230,114 bricks made. Makes compressed fire bricks out of sawdust. Includes hydraulic system, motor controls attached. Does not include dust pipe or infeed hopper system. Does not include pallets of fire bricks. Contact Allison 93-698-7058 , if interested in purchasing a pallet of fire brick.

290A

6'x28" Belt Conveyor
With steel sides, gear motor drive, controls attached, foot controller.

291

Belt Conveyor
Approx 36' stainless steel 12", gear motor drive, support to ground to include loading bin for brickette machine.

292

Stainless Steel Conveyor
75'x12" with gear motor drive, support to the ground. Includes 2 spare sections on conveyor frame. Located outside on the ground.

300

AirCon Dust System #1
1st lot in entirety, 13' diameter bag house , controls marked #1. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on left when facing the building)

252

New parts in crate
Details and Pictures to follow. Part of Master Tie Back

301

Daniels Fans Blower
Part of Entirety. B1F930, Order # 1707736, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe.

302

Siemens Motor
Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect.

303

Soft Start Starter
Part of Entirety. Used for 150 hp blower motor. Marked for #1 Dust System. On back wall.

305

Dust Pipe
Part of Entirety. For Dust system #1 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.38" (sn: 037-010095-001) (sn: 037-010096-001).

306

Dust System #1 Entirety
Lots 300-305 tied together with a 10% raise to open the bid.

310

AirCon Dust System #2
1st lot in entirety, 13' diameter bag house , controls marked #2. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on right when facing the building)

311

Daniels Fans Blower
Part of Entirety. B1E930, Order # 1707737, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe.

312

Siemens Motor
Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect.

313

Soft Start Starter
Part of Entirety. Used for 150 hp blower motor. Marked for #2 Dust system. Located on back wall.

315

Dust Pipe
Part of Entirety. For Dust system #2 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.36" (sn: 037-010097-001) (sn: 037-010094-001). Does Not Include manifold or pope for Weinig 6 Head Molder

304

Soft Start Starter
Part of entirety

316

Dust System #2 Entirety
Lots 310-315 tied together with a 10% raise to open the bid.

317

Ladder and Catwalk
Part of Entirety. System for Dust System #1 and #2

318

Clarke's Pyro Guard Spark Detection and Fire Suppressor System
Part of Entirety. To include control boxes and sensors in and on the dust pipe system.

319

Hyfab MVP Sprinkler System
Part of Entirety. Model MVP-850-460, Product- PRD-21498-01 for dust system.

320

AirCon Corp. Dust Transfer
Part of Entirety. For loading system to include AirCon Corp. Pneumatic Conveying Systems blower with 25 hp motor, Siemens60 amp disconnect. Approx. 130' 16" infeed and outfeed dust pipe, (2) Clarke's ERO star type feeders, (2) Clarke's dual automatic loading chutes. Disconnect pipe at trailer.

325

Dust System Master Entirety
Lots 300-321 tied together with a 10% raise to open the bid.

318A

Allen Bradley Motor Control Box

326

2017 Atlas Air Copco Compressor
GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect. (sn: AP1671180). Built in 100 hp Air Dryer System (sn: 1TJ022168) In locked room in back of warehouse.

314

Soft Start Starter
Part of entirety

327

2017 Atlas Copco Air Compressor
GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect (sn: Ap1671357). Built in Air Dryer 100 hp system. Located in locked room in back of warehouse.

328

Atlas Copco Air Dryer
Model 0SC825, Quality Air Solutions

329

Reserve Air Tank
165 PSI, Disconnect at 1st joint. No pipe. Located at back of warehouse.

330

2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer
Model SFS-45, (VIN 1Z92B452JT199278), mfg. date-9/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back. Does include the doors that are leaning against the building.

331

Morgans Fabricating & Welding Co. Dust Unloading System
92"x110" dust bin, 12'x14" auger system, controls as marked

333

2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer
Model SFS-45, (VIN 1Z92B4522JT19950), mfg. date-907/17/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back, Does include Door that are leaning against the building.

334

Morgans Fabricating & Welding Co. Dust Unloading System
92"x110" dust bin, 12'x14" auger system, controls as marked

321

Soft Start Starter
inside, details to coming soon.

334A

15 hp Hydraulic Unit*
operates the two walking floor trailers includes motor controls attached and hydraulic hoses to trailers.

335

Motor Control Panel
For Trailer Dust System to include 100 amp safety.

340

Siemens Switch Board
1st lot of entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330.

341

Aluminum Wire Tray
Part of Entirety. 480' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line.

328

Air Compressor
Details to follow

342

2017 Spectra Series Busway 3000 amp
To include (30) 10' bus sections, (41) misc. size disconnects. All installed in 2017.

329

Air Compressor
Details to follow

343

Siemens Switch Board
Part of Entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330.

344

Aluminum Wire Tray
Part of Entirety. 340' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line.

345

2017 Spectra Series Busway 3000 amp
Part of Entirety. To include (30) 10' bus sections, (39) misc. size disconnects. All installed in 2017.

346

Wire
Part of Entirety. From Individual Equipment to disconnects.

347

Electrical Entirety Lot 340-346
Tied together with 10% raise to open the bid.

348

Spectra Series Busway
(10) 10' sections of spares, 3000 amp. Uninstalled. Most are used and some say "bad".

349

Aluminum Wire
(15) partial rolls of Camerony 750 MCM, 600 volt.

349A

Electrical
To include New Buss Bar Electric boxes, various sizes.

350

Pallet of Rip Saw blades
(13) plywood rip saw blades, (1) hogger blade

351

Weining Heads
To include 10" planner segmented knives, 6" head segmented knives, 1 1/2" box of segment teeth, (2) 1/2" tongue side head, (2) 1/2" groove side head, (1) 3/4" grove side head, (2) 3/8" groove side head, (2) 3/8" tongue side head, (1) 3/4" tonue side head.

352

Weining Moulder Parts
On pallet to include rollers, segmented wheels, (2) setting devices, (4) guards.

353

End Matcher Heads
On pallet to include (1) Tongue bottom score, 3/8", 1/2" , 3/4", (1) Groove trim bevel, (2) Tongue bottom bevel profile 3/8", 1/2" , (1) Tongue top score, 3/8", 3/4", 1/2", (2) Groove bottom bevel profile 3/8", 1/2", (1) Groove bottom bevel profile 3/4", (1) Tongue trim bevel 3/8", 3/4", 1/2", (1) Tongue bottom bevel profile 3/4".

354

Plastic Belt for Hasko Endmatcher
36", (www.reginachain.net), box of chain segments on pallet.

355

New/Used Air Regulators
And wheels on pallet.

356

Mostly New Speed Drives
On pallet

357

Various Motors/Gear Boxes
On Pallet to include (1) Baldor .75 hp motor, (2) DR roller/conveyor gear boxes, (1) 1.75KW Siemens Motor, Sirocco Fan Model KL750, (1) applicator roller gear box, (1)Symons applicator roller motor, (1) Dayton 1/30 hp blower motor, (2) gear boxes, (1) .86 KW motor.

358

New/Used Misc. Parts
On pallet.

359

(2) pallet of Nordson Glue Parts
And Defect Filler, includes hoses, guns, and end dams.

360

Misc. Bearing
On pallet to include (4) dust collection Dodge Pillow Block bearing for dust collector van.

361

(3) Grease Guns and Grease

362

Misc. New/Used Parts
To include sprockets, (3) boxes of sand paper for hand scraper.

363

Parts for Chop Saw
to include glue roll on pallet.

364

Pallet of Chain
To include paddle chain for 12" dust conveyors, (1) box of specialized roller chain.

365

Pallet of Belts
Various sizes.

366

Pallet of Motors
to include (1) 15 hp motor, Dodge Speed reducer, 5.5 KW motor, and air valve.

367

Rubber Belting
For Glue Line equipment on pallet.

368

(3) Pallets of Dust Collector Pipe

369

Capacitor
New, 15 KW.

370

Pallet of Misc.
To include lift gate and guards.

371

Box of 3M Buffer
New.

372

(3) 54" Rubber Belting
New.

373

(4) 6' West Rock Rubberized Belting
New.

374

Glue Roller
6"x14"

375

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

376

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

377

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

378

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

379

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

380

Glue Roller
37"x15"x15"

381

Roller for Timesaver
54"x6"

382

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

383

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

384

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

385

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

386

Rollers for Conveyors
(1) 97"x8", (1) 55"x8", (1) 37"x3"

387

Roller for Costa
ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end.

388

Crate of Costa Rollers
to include (1) ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end, (8) 58"x3" rolls, mm62x73x14.70, Disigno 12DA03780.

389

54" Costa VSL1212.7 Feed Belt
in crate.

390

(2) New Stanza Buff Rollers
in crate.

391

(2) Finzer Buff Rollers
Part 36354164-4 in crates.

392

Finzer Rubber Coated Roller
57"x10"

393

Finzer Chrome Roller
57"x6"

394

Finzer Sponge Roller
57"x10"

395

Crate of Costa Parts
To include guard.

396

Costa Parts in Crate
To include New Feed belt VSL008722, (2) 57"x3" Chrome Rollers

397

(4) Costa Chrome Rollers
56"x6" in crate

398

Costa Used Roller with guards
54"x8"

399

CATO-CT02 Recover OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

400

Sand Paper
All pallets to include 52"x103", 52"x75", 53"x 128" various grit. In boxes and on rack. Does not include rack.

401

Misc. parts
To include roll and guard.

Photo Gallery

Share This Listing

Other Sales by
This Company

Apr 24
English, IN

Apr 25
Orland, IN

Apr 26
Middlebury, IN

Apr 26
Middlebury, IN

Apr 26
na, IN

View all listings

Cabinets To Go

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone:

2350 W. O.
Smith Drive, TN 38464

Tuesday Mar 28, 2023 Completed

Bidder Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Details
Specialized Engineered Flooring line. All LIKE NEW! 00 Information Lot Engineered Hardwood Flooring Plant- Note: Notice Specs and invoices for lots in the document section of specific lots. Call if you have questions. (Opportunity of a Life Time to get like new equipment) Viewing by appointment only: Zach Kittrell 931-224-0699, Appointment is mandatory, you will not be allowed on premises if not approved ahead of time, as this is a warehouse that is an on-going business. 2350 W.O.Smith Drive, Lawrenceburg, TN 38464 Equipment Removal is 30 days and must be held strictly to that deadline. Rigging Option: Paul Avery, 270-543-1919, will have visited the plant prior to the auction. He plans to be there the day of the auction and the day after to load out any small items. He has met all insurance requirements set forth by Bright Star Auctions and Cabinets to Go. If rigging your own equipment, please provide a certificate of insurance with $1 million in liability insurance with Bright Star Auctions and Cabinets to Go as the beneficiary. Email COI to ak@brightstarauctions.com prior to removing any equipment from the premises. Contact Allison Kittrell (931-698-7058) if you have any questions with insurance requirements. 99 Abnox High Pressure Hyd. Lubrication Gun air operated 100 Mereen Johnson Machine Co. Gang Rip Saw (MJ3946) Model MJ424-DC, 75 hp motor, controls attached, laser lights. Includes wood crate of spare parts. 101 Morgan's Fabricating & Welding Company Live Rollcase 26'x 18" to the rip saw, rubber tire hold down, gear motor drive, to include box of new chain under rollcase. 102 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 103 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 104 2015 Weining Model Unimat 217 Automatic Planer & Moulder (SN: 121985), 4 head machine, controls attached 105 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 106 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 107 Cantek CFS-100 Cutoff Saw Computer Controlled Optimizing, (sn: 0617100014), 4"x12" capacity, 4" thickness capacity, 4' infeed & outfeed, controls as marked. Roll around control panel. 108 Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 109 2017 Wintersteiger 5161-310-XM Thin cutting band Quad Band Resaw DSB Twin 4 head NG 310 2XM (sn: 5161-417-0030) Model 5161-14-01 1,073 hours, weight 36,376 lbs. per unit, 5000 volt -53 machine v/ Hz. 5161-400 main drive 32 kw, voltage: To include 8'6" infeed and 8'6" outfeed rollcases, includes pallet of misc. part for machine. See detailed info from the invoice in the documents tab. 110 New Sawblades 10 boxes with 5 in each box, total 50 blades. 111 Used Sawblades Approx. 54 used blades, different saw styles. Does not include racks in photo. 112 (6) Portable Saw Racks Does not include saw blades in the photo. 113 Portable Saw Rack Check back for updates and pictures. 114 Portable Saw Rack Check back for updates and pictures. 119 Material Rack 5'x2', Portable. 115 Portable Saw Rack Check back for updates and pictures. 120 2017 Costa Levigatrici SK Sander 3 head, 54" wide, model SK-5 CCT1350, (sn: LP156002A), weight 3200 kg, (does not include fire extinguisher) 116 Portable Saw Rack Check back for updates and pictures. 128 Rip Saw 60" wide, multi rip saw for plywood, 1.5" thickness capacity, includes 50 hp motor, 6'x60" infeed rollcase with rubber tire feed system, (2) preset up saw arbors, console controls as marked 117 Portable Saw Rack Check back for updates and pictures. 129 Morgan's Fabricating & Welding Company Infeed System to Rip Saw Automatic, 6" 3 strand package deck with roller type chain, gear motor drive, to an 8'x4' scissor lift with gravity rolls, push button operated, 11' rolling chain type feeder to infeed deck for rip saws, all controls attached 118 Portable Saw Rack Check back for updates and pictures. 130 Morgan's Fabricating & Welding Company Outfeed Rollcase from Rip Saw 10'x60", (16) 3" rubber coated rolls, laser light stops, Baldor gear motor drive, controls attached 131 2002 Costa Levigatrici CTC1350 Belt Sander (SN: A20320AC2), bottom calibrating sanding, 3 head belt sander with controls as marked. To include 2002 FLLI Ferrai Vacuum Blower, type ELVEFC, 38", 716-P4A-RD-1325A/2P 132 Morgan's Fabricating & Welding Company Belt Conveyor 11'x54", gear motor drive 133 2005 Costa Levigatrici KA CCT1350 Sander 3 head, 52" wide capacity, top calibrating, weight 4000 kg, controls attached to include 24" Vacuum blower, 5.5 hp motor, no infeed/outfeed pipe included. Does not include fire extinguisher. 135 Morgan's Fabricating & Welding Company Belt Conveyor 11' 6"x54", gear motor drive, controls attached 136 Morgan's Fabricating & Welding Company Rollcase Part of Entirety. 9'6"x60", (16) 3" diameter rubber coated rolls, to include 13' 3 strand pop up transfer with 3" plastic chain, gear motor drive, motor controls attached, and stand along control console. 137 Overhead Heat Lamp System Part of Entirety. (3) heat lamps to include electric panel as marked. No inlet wire included. Includes only wire from box to lights 138 2017 Union Tool Corp Glue System Part of Entirety. 15-C-14" HM RC, (sn: 21131), 138A (1) Nordson Glue Melter Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine. Type XV-460-57TQB-1-1R-4 (sn: 101000018235) 138B (1) Nordson Glue Melter Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine Type XV-460-57TQB-1-1R-4 (sn: 101000018234) 140 Morgan's Fabricating & Welding Company Infeed Transfer Deck Part of Entirety. 9' 3 strand 55" arms with rubber chain, gear motor drive, power feed roll 141 Morgan's Fabricating & Welding Company Veneer Placement Table Part of Entirety. 12'x18". 142 Morgan's Fabricating & Welding Company Glue Press Roll System Part of Entirety. 30', 15" rolls, air hold downs, controls as marked, no outlet wire included cut 6" above box 143 Glue Line Entirety Lots 136-142 with a 10% raise to open the bid. 139 Drums of Adhesive 55 gallon, (11). Check back for updates and pictures. 144 Morgan's Fabricating & Welding Company Belt Conveyor 12'6"x12', gear motor drive, controls attached 145 Nordson Altablue 16TT Filler Station/Handgun System (SN: NC18C00652) includes melting pot, (2) applicator guns, (LU17H40674), controls as marked 146 Morgan's Fabricating & Welding Company Belt Conveyor 25'x50", gear motor drive, controls attached, emergency stop 147 Morgan's Fabricating & Welding Company Belt Conveyor 25'x84", gear motor drive, controls attached, emergency stop 148 Morgan's Fabricating & Welding Company Belt Conveyor 10'6"x84", gear motor drive, controls attached 149 Morgan's Fabricating & Welding Company Transfer Rollcase 10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand transfer deck with 3" plastic chain, gear reduction drive, controls as marked, stand alone console. 150 Morgan's Fabricating & Welding Company Belt Conveyor 12'x54", gear reduction drive, controls attached 151 HOLZHER Kundig Brilliant 2-53RCd Wide Belt Sander (sn: 27227), 54" capacity, 3 head 152 Morgan's Fabricating & Welding Company Belt Conveyor 12'x54", outfeed to sander, gear motor drive, controls attached 153 Morgan's Fabricating & Welding Company Rollcase 10'x60" (16) 3" rubber coated rolls to include 14'6" 3 strand jump up transfer deck with 3" plastic chain, gear reduction drive, controls attached with push button control panel 154 2017 Weining Unimat 818S Automatic Planer & Moulder (SN: C04146) 6 head machine, 12" capacity, Machine #123655, controls as marked. To include pipe to manifold an manifold to 1st corrugated pipe. 155 Infeed Table 9' with power roll includes 3 strand 56" transfer with 3" plastic chain, controls attached. 156 Morgan's Fabricating & Welding Company Belt Conveyor 7'6"x12", outfeed, gear motor drive 157 Morgan's Fabricating & Welding Company Belt Conveyor 23'x9" within the 23' is a 6' incline sections, gear motor drive, controls attached 158 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", gear motor drive, controls attached 159 Cantek CFS-100 Cutoff Saw Computer Controlled Optimizing, (sn: 0617100015), 4"x12" capacity, 4" thickness capacity, 4' infeed & 40" outfeed, controls as marked 159A Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 160 Morgan's Fabricating & Welding Company Belt Conveyor 15'x12", infeed, gear motor drive, controls attached.(16) 161 Morgan's Fabricating & Welding Company Belt Conveyor 16'x12", outfeed, gear motor drive, controls attached.(17) 162 Morgan's Fabricating & Welding Company Belt Conveyor 16'x96", incline, gear motor drive, controls attached. (18) 163 Hasko MPEN-C-33-O-LP End Matcher Head Serial number (sn: 1770004-G) (sn: 170004-T) 94" wide bed, 24' bed overall length, includes control panel 164 Hytrol Waste Conveyor Incline, 7'x12" slat belt, gear motor drive 159B Hytrol Incline Waste Conveyor 9'x18, gear motor drive. Portable. 165 Hytrol Waste Conveyor Incline, 7'x12" slat belt, gear motor drive 166 Morgan's Fabricating & Welding Company Belt Conveyor Incline, 12'x36" gear motor drive, controls attached. 167 Morgan's Fabricating & Welding Company Belt Conveyor 20'x8', gear motor drive, controls attached. 169 2017 Costa Levigatrici Serie K Hand Scraper & Vacuum blower K7YYC1350, (sn:LB731024A), 54" wide, 2 heads, does saw marks and hand scrap. Cleaning brush, 2017 36" Type FB716P4SLG0, no inlet/outlet pip included. 171 Morgan's Fabricating & Welding Company Scissor Lift 17'x42", 8,000 capacity, foot operated 172 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 173 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 174 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4,500lb capacity, foot operated* 175 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated* 176 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated. * 177 Morgan's Fabricating & Welding Company Scissor Lift 8'x4', 4500 lb. capacity, foot operated.* 200 Timesavers 23 Series Sander 1st Log of Entirety. Model 2341-45-001, 4 head, wide belt, 52" capacity, controls as attached. (sn: 33656) (Corp Label B1) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe. 201 Morgan's Fabricating & Welding Company Belt Conveyor Part of Entirety. 9'6"x54", gear motor drive, controls attached. 203 2017 Infinity 4S1350 Deduster Part of Entirety. 4 brush, 53" wide, (sn: AB-0121) mfg. date 8/17, controls attached. (Corp Label C1). To include vacuum blower, 26", 7.5 hp motor, no motor controls, Pipe to machine, no outlet pipe. 205 Stanza Machinery Company Applicator Part of Entirety. STM, Model STR52-2, (sn: 171509) 2 station, 52" wide capacity, controls attached, control panel. (Corp Label: D1). 206 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171531), 6'x52" controls attached, seamless rubber belt. (Corp. Label 3). 207 2017 Infinity IS 1350 Alpha Brush Buffer Part of Entirety. Single head (sn: AB-125), 53" pass through belt, control panel, mfg. 8/17. (Corp. label E1). To include 22" vacuum blower, Model HP-6C-22. Pipe to machine only, no outlet pipe included. 209 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-3, (sn: 171510), control console included. To include 22" Vacuum blower, Model HP-6C-22 (Corp. label F1). 210 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-3, (sn: 171516), 3 lamp, (Corp. label GI). 211 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, Model STC52-1, (sn: 171534), 36"x52", controls attached, seamless rubberized belt, (Corp. label 4). 211A 1st Sander Line entirety lots 200-211 tied together with a 10% raise to open the bid. 212 2017 Infinity, 3 head Buffer Part of Entirety. Control panel as marked. (sn: AB-0122) C2 Corp label. To include 22" vacuum blower, no inlet/outlet pipe included. 213 Stanza Machinery Company Belt Conveyor Part of Entirety. Model STC52-2, (sn: 171522), 6'x52", controls attached, seamless rubberized belt, (Corp. label 5). 214 Stanza Machinery Company Applicator Part of Entirety. Model STF52-1, (sn: 171514), Single, controls attached, (Corp. label D2). 215 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 1715112), 36"x52", controls attached, seamless rubberized belt, (Corp. label 6). 216 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-3, (sn: 171511) 52", 3 lamp, controls attached, (Corp. label G2). 217 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, STC52-1, (sn: 171515), 3'x52" controls attached, seamless rubberized belt, (Corp. label 7). 216A Sander line #2 Entirety Lots 212-216 tied together with a 10% raise to open the bid. 218 2017 Infinity 3S1350 Buffer Part of Entirety. Alpha Brush (sn: AB-0123) with vacuum blower, (Corp. label C3). 219 Stanza Machinery Company Belt Conveyor Part of Entirety. Model STC52-2, (sn: 171526), 6'x52", controls attached, seamless rubberized belt, (Corp. label 8) 220 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, single, control console attached. (Corp. Label D3). 221 Electric Box Part of Entirety. No wire or conduit included. 222 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171530), 3'x52" controls attached, seamless rubberized belt, (Corp. label 9). 223 Stanza Machinery Company UV Oven Part of Entirety. Model ST052-1, (sn: 171521) 52", 2 lamp, controls attached. (Corp. Label G3). 224 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171518), 6'x52" controls attached, seamless rubber belt. (Corp. Label 10). 225 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171523), single, control console attached. (Corp. Label D4) 226 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171520), 3'x52", controls attached, seamless rubberized belt. (Corp. label: (11). 227 Stanza Machinery Company UV Oven Part of Entirety. Model ST052-2, (sn: 1715253), 2 lamp, controls attached. (Corp. Label G4). 228 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, 6'x52" controls attached, seamless rubberized belt. (Corp. label 12). 229 Stanza Machinery Company Applicator Part of Entirety. STM,model STR52-1, (sn: 171527), single head. (Corp. label D5). 230 Infinity Alpha Brush Buffer Part of Entirety. (sn: AB-0124), With vacuum blower. (Corp. label E2). 231 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-2,(sn: 171540), control console included. (Corp. label F2). 232 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-4, (sn: 171529), 4 lamp, controls attached, (Corp. label G5) 233 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171517), 3'x52", seamless rubberized belt, controls attached. (Corp. label 13) 233A Entirety Lot of 1st line only Lots 200-233 with 10% raise to open the bid. 234 Timesavers 23 Series Sander 1st Lot of Entirety. Model 2321-23-11, (sn: 33868), double head, wide belt, 52" capacity, controls as attached. (Corp Label B2) to include Vacuum blower, 30", 15 hp motor, no motor controls, no dust pipe. 235 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171532), 6'x52", seamless rubberized belt, controls attached. (Corp. label 14). 236 Infinity 4S 1350 Alpha Brush Deduster Part of Entirety. (SN: AB0127 ) 4 head with vacuum blower. (Corp. label C4). 237 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171536), 6'x52", seamless rubberized belt, controls attached. (Corp. label 15). Part of Entirety. 238 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 177537), single head. (Corp. label D6). 239 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-1, (sn: 171524), 6'x52", seamless rubberized belt, controls attached. (Corp. label 16). 240 Stanza Machinery Company UV Oven Part of Entirety. STM, Model ST052-2, (sn: 171525), 2 lamp, controls attached, (Corp. label G6). 241 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-4, (sn: 1715238), 6'x52", seamless rubberized belt, controls attached. (Corp. label 17) 242 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7). 243 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, Model STC52-2, (sn: 171513), 6'x52", seamless rubberized belt, controls attached. (Corp. label 18). 244 Stanza Machinery Company Applicator Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7). 245 Infinity 1S 1350 Alpha Brush Buffer Part of Entirety. (SN:AB-0126) with vacuum blower. (Corp. label E3). 246 Stanza Machinery Company Stain Wiper Part of Entirety. STW52-5, (sn: 171528),control console included. (Corp. label C5). 247 Stanza Machinery Company Belt Conveyor Part of Entirety. STM, model STC52-2, (sn: 171508) 6'x52", seamless rubberized belt, controls attached. (Corp. label 19 ). 248 Stanza Machinery Company UV Oven Part of Entirety. STM,model ST052-4, (sn: 171542), 4 lamp, controls attached, (Corp. label G7). 249 Finishing Line Entirety of 2nd line Lots 234-249 with a 10% raise to open the bid 250 Morgan's Fabricating & Welding Company Belt Conveyor 44"x48", standard rubber belt, controls attached. (Corp. label 20). Part of Master Tie back. 251 Morgan's Fabricating & Welding Company Belt Conveyor 40"x84", standard rubber belt, controls attached. (Corp. label ). Part of Master Tie Back 280 Finishing Line Master Entirety Lots 200-280 with a 10% raise to open the bid. 281 Storage Cabinet (2) flammable liquid units 290 2015 Ruf Brick Machine System Machine # 2410, RUF1100 Plus, 480/3PH- 100 hp. weight 13,200 lbs. 550 hours, 230,114 bricks made. Makes compressed fire bricks out of sawdust. Includes hydraulic system, motor controls attached. Does not include dust pipe or infeed hopper system. Does not include pallets of fire bricks. Contact Allison 93-698-7058 , if interested in purchasing a pallet of fire brick. 290A 6'x28" Belt Conveyor With steel sides, gear motor drive, controls attached, foot controller. 291 Belt Conveyor Approx 36' stainless steel 12", gear motor drive, support to ground to include loading bin for brickette machine. 292 Stainless Steel Conveyor 75'x12" with gear motor drive, support to the ground. Includes 2 spare sections on conveyor frame. Located outside on the ground. 300 AirCon Dust System #1 1st lot in entirety, 13' diameter bag house , controls marked #1. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on left when facing the building) 252 New parts in crate Details and Pictures to follow. Part of Master Tie Back 301 Daniels Fans Blower Part of Entirety. B1F930, Order # 1707736, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe. 302 Siemens Motor Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect. 303 Soft Start Starter Part of Entirety. Used for 150 hp blower motor. Marked for #1 Dust System. On back wall. 305 Dust Pipe Part of Entirety. For Dust system #1 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.38" (sn: 037-010095-001) (sn: 037-010096-001). 306 Dust System #1 Entirety Lots 300-305 tied together with a 10% raise to open the bid. 310 AirCon Dust System #2 1st lot in entirety, 13' diameter bag house , controls marked #2. Includes metal stand, 2 way discharge, disconnect at ERO feeder. Does not include any pipe, or fire sparked detectors. (on right when facing the building) 311 Daniels Fans Blower Part of Entirety. B1E930, Order # 1707737, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe. 312 Siemens Motor Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect. 313 Soft Start Starter Part of Entirety. Used for 150 hp blower motor. Marked for #2 Dust system. Located on back wall. 315 Dust Pipe Part of Entirety. For Dust system #2 to include 36" trunk line pipe outside building and inside building connected to system #1. Includes (2) Clarke's abort gates, CP34.36" (sn: 037-010097-001) (sn: 037-010094-001). Does Not Include manifold or pope for Weinig 6 Head Molder 304 Soft Start Starter Part of entirety 316 Dust System #2 Entirety Lots 310-315 tied together with a 10% raise to open the bid. 317 Ladder and Catwalk Part of Entirety. System for Dust System #1 and #2 318 Clarke's Pyro Guard Spark Detection and Fire Suppressor System Part of Entirety. To include control boxes and sensors in and on the dust pipe system. 319 Hyfab MVP Sprinkler System Part of Entirety. Model MVP-850-460, Product- PRD-21498-01 for dust system. 320 AirCon Corp. Dust Transfer Part of Entirety. For loading system to include AirCon Corp. Pneumatic Conveying Systems blower with 25 hp motor, Siemens60 amp disconnect. Approx. 130' 16" infeed and outfeed dust pipe, (2) Clarke's ERO star type feeders, (2) Clarke's dual automatic loading chutes. Disconnect pipe at trailer. 325 Dust System Master Entirety Lots 300-321 tied together with a 10% raise to open the bid. 318A Allen Bradley Motor Control Box 326 2017 Atlas Air Copco Compressor GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect. (sn: AP1671180). Built in 100 hp Air Dryer System (sn: 1TJ022168) In locked room in back of warehouse. 314 Soft Start Starter Part of entirety 327 2017 Atlas Copco Air Compressor GA75VSD-175FF, 3628 hours, 460/60 Hz- 100 hp variable speed, 200 amp disconnect (sn: Ap1671357). Built in Air Dryer 100 hp system. Located in locked room in back of warehouse. 328 Atlas Copco Air Dryer Model 0SC825, Quality Air Solutions 329 Reserve Air Tank 165 PSI, Disconnect at 1st joint. No pipe. Located at back of warehouse. 330 2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer Model SFS-45, (VIN 1Z92B452JT199278), mfg. date-9/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back. Does include the doors that are leaning against the building. 331 Morgans Fabricating & Welding Co. Dust Unloading System 92"x110" dust bin, 12'x14" auger system, controls as marked 333 2018 Innovative Trailers, Inc (ITI) Walking Floor Closed top Trailer Model SFS-45, (VIN 1Z92B4522JT19950), mfg. date-907/17/17, 65,000 lbs., 11R24.5 tires, 24.8x8.25 rims, Hallco Industries, Inc walking floor system. Does not include the Murphy Dust unloading system that is attached to back, Does include Door that are leaning against the building. 334 Morgans Fabricating & Welding Co. Dust Unloading System 92"x110" dust bin, 12'x14" auger system, controls as marked 321 Soft Start Starter inside, details to coming soon. 334A 15 hp Hydraulic Unit* operates the two walking floor trailers includes motor controls attached and hydraulic hoses to trailers. 335 Motor Control Panel For Trailer Dust System to include 100 amp safety. 340 Siemens Switch Board 1st lot of entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330. 341 Aluminum Wire Tray Part of Entirety. 480' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line. 328 Air Compressor Details to follow 342 2017 Spectra Series Busway 3000 amp To include (30) 10' bus sections, (41) misc. size disconnects. All installed in 2017. 329 Air Compressor Details to follow 343 Siemens Switch Board Part of Entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330. 344 Aluminum Wire Tray Part of Entirety. 340' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line. 345 2017 Spectra Series Busway 3000 amp Part of Entirety. To include (30) 10' bus sections, (39) misc. size disconnects. All installed in 2017. 346 Wire Part of Entirety. From Individual Equipment to disconnects. 347 Electrical Entirety Lot 340-346 Tied together with 10% raise to open the bid. 348 Spectra Series Busway (10) 10' sections of spares, 3000 amp. Uninstalled. Most are used and some say "bad". 349 Aluminum Wire (15) partial rolls of Camerony 750 MCM, 600 volt. 349A Electrical To include New Buss Bar Electric boxes, various sizes. 350 Pallet of Rip Saw blades (13) plywood rip saw blades, (1) hogger blade 351 Weining Heads To include 10" planner segmented knives, 6" head segmented knives, 1 1/2" box of segment teeth, (2) 1/2" tongue side head, (2) 1/2" groove side head, (1) 3/4" grove side head, (2) 3/8" groove side head, (2) 3/8" tongue side head, (1) 3/4" tonue side head. 352 Weining Moulder Parts On pallet to include rollers, segmented wheels, (2) setting devices, (4) guards. 353 End Matcher Heads On pallet to include (1) Tongue bottom score, 3/8", 1/2" , 3/4", (1) Groove trim bevel, (2) Tongue bottom bevel profile 3/8", 1/2" , (1) Tongue top score, 3/8", 3/4", 1/2", (2) Groove bottom bevel profile 3/8", 1/2", (1) Groove bottom bevel profile 3/4", (1) Tongue trim bevel 3/8", 3/4", 1/2", (1) Tongue bottom bevel profile 3/4". 354 Plastic Belt for Hasko Endmatcher 36", (www.reginachain.net), box of chain segments on pallet. 355 New/Used Air Regulators And wheels on pallet. 356 Mostly New Speed Drives On pallet 357 Various Motors/Gear Boxes On Pallet to include (1) Baldor .75 hp motor, (2) DR roller/conveyor gear boxes, (1) 1.75KW Siemens Motor, Sirocco Fan Model KL750, (1) applicator roller gear box, (1)Symons applicator roller motor, (1) Dayton 1/30 hp blower motor, (2) gear boxes, (1) .86 KW motor. 358 New/Used Misc. Parts On pallet. 359 (2) pallet of Nordson Glue Parts And Defect Filler, includes hoses, guns, and end dams. 360 Misc. Bearing On pallet to include (4) dust collection Dodge Pillow Block bearing for dust collector van. 361 (3) Grease Guns and Grease 362 Misc. New/Used Parts To include sprockets, (3) boxes of sand paper for hand scraper. 363 Parts for Chop Saw to include glue roll on pallet. 364 Pallet of Chain To include paddle chain for 12" dust conveyors, (1) box of specialized roller chain. 365 Pallet of Belts Various sizes. 366 Pallet of Motors to include (1) 15 hp motor, Dodge Speed reducer, 5.5 KW motor, and air valve. 367 Rubber Belting For Glue Line equipment on pallet. 368 (3) Pallets of Dust Collector Pipe 369 Capacitor New, 15 KW. 370 Pallet of Misc. To include lift gate and guards. 371 Box of 3M Buffer New. 372 (3) 54" Rubber Belting New. 373 (4) 6' West Rock Rubberized Belting New. 374 Glue Roller 6"x14" 375 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 376 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 377 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 378 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 379 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 380 Glue Roller 37"x15"x15" 381 Roller for Timesaver 54"x6" 382 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 383 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 384 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 385 CATO-CT01R Regrind OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 386 Rollers for Conveyors (1) 97"x8", (1) 55"x8", (1) 37"x3" 387 Roller for Costa ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end. 388 Crate of Costa Rollers to include (1) ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end, (8) 58"x3" rolls, mm62x73x14.70, Disigno 12DA03780. 389 54" Costa VSL1212.7 Feed Belt in crate. 390 (2) New Stanza Buff Rollers in crate. 391 (2) Finzer Buff Rollers Part 36354164-4 in crates. 392 Finzer Rubber Coated Roller 57"x10" 393 Finzer Chrome Roller 57"x6" 394 Finzer Sponge Roller 57"x10" 395 Crate of Costa Parts To include guard. 396 Costa Parts in Crate To include New Feed belt VSL008722, (2) 57"x3" Chrome Rollers 397 (4) Costa Chrome Rollers 56"x6" in crate 398 Costa Used Roller with guards 54"x8" 399 CATO-CT02 Recover OEM Style Coater Roll 8.500x9.500x57.00 Rubber Coater. 400 Sand Paper All pallets to include 52"x103", 52"x75", 53"x 128" various grit. In boxes and on rack. Does not include rack. 401 Misc. parts To include roll and guard.

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
estate sale listings delivered to your inbox

Login

Username:

Password:

Close X

Return

Cabinets To Go

Live Auction

View Gallery (200)

Sale Date(s)

Tuesday Mar 28, 2023 Completed

Sale Location

Smith Drive, TN 38464

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.

Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:

IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .

Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Auction Conducted in the State of Indiana.

1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.

Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction.

Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.

No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.

Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:

1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.

1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.

1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.

1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.

1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.

1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.

1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.

1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,

1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.

1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

1. Online Bids. Online bids may not be reduced or retracted.

Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.

Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.

Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.

Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.

All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.

Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.

Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or

representation by Auctioneer

Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.

Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.

Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.

All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.

Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.

Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.

Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.

Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.

Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.

Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled

to specific performance or other equitable relief.

Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.

Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.

Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.

Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.

Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.

Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.

Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Specialized Engineered Flooring line. All LIKE NEW!

Information Lot

Engineered Hardwood Flooring Plant- Note: Notice Specs and invoices for lots in the document section of specific lots. Call if you have questions.

(Opportunity of a Life Time to get like new equipment)

2350 W.O.Smith Drive, Lawrenceburg, TN 38464

Equipment Removal is 30 days and must be held strictly to that deadline.

Abnox High Pressure Hyd. Lubrication Gun
air operated

100

Mereen Johnson Machine Co. Gang Rip Saw
(MJ3946) Model MJ424-DC, 75 hp motor, controls attached, laser lights. Includes wood crate of spare parts.

101

Morgan's Fabricating & Welding Company Live Rollcase
26'x 18" to the rip saw, rubber tire hold down, gear motor drive, to include box of new chain under rollcase.

102

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

103

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

104

2015 Weining Model Unimat 217 Automatic Planer & Moulder
(SN: 121985), 4 head machine, controls attached

105

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

106

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

107

Cantek CFS-100 Cutoff Saw
Computer Controlled Optimizing, (sn: 0617100014), 4"x12" capacity, 4" thickness capacity, 4' infeed & outfeed, controls as marked. Roll around control panel.

108

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

109

2017 Wintersteiger 5161-310-XM Thin cutting band Quad Band Resaw

110

New Sawblades
10 boxes with 5 in each box, total 50 blades.

111

Used Sawblades
Approx. 54 used blades, different saw styles. Does not include racks in photo.

112

(6) Portable Saw Racks
Does not include saw blades in the photo.

113

Portable Saw Rack
Check back for updates and pictures.

114

Portable Saw Rack
Check back for updates and pictures.

119

Material Rack
5'x2', Portable.

115

Portable Saw Rack
Check back for updates and pictures.

120

2017 Costa Levigatrici SK Sander
3 head, 54" wide, model SK-5 CCT1350, (sn: LP156002A), weight 3200 kg, (does not include fire extinguisher)

116

Portable Saw Rack
Check back for updates and pictures.

128

117

Portable Saw Rack
Check back for updates and pictures.

129

118

Portable Saw Rack
Check back for updates and pictures.

130

Morgan's Fabricating & Welding Company Outfeed Rollcase from Rip Saw
10'x60", (16) 3" rubber coated rolls, laser light stops, Baldor gear motor drive, controls attached

131

132

Morgan's Fabricating & Welding Company Belt Conveyor
11'x54", gear motor drive

133

135

Morgan's Fabricating & Welding Company Belt Conveyor
11' 6"x54", gear motor drive, controls attached

136

137

Overhead Heat Lamp System
Part of Entirety. (3) heat lamps to include electric panel as marked. No inlet wire included. Includes only wire from box to lights

138

2017 Union Tool Corp Glue System
Part of Entirety. 15-C-14" HM RC, (sn: 21131),

138A

(1) Nordson Glue Melter
Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine. Type XV-460-57TQB-1-1R-4 (sn: 101000018235)

138B

(1) Nordson Glue Melter
Part of Entirety. Adhesive melter vat and pump system, Versadrum 8203243 (sn: LU17H40675). Includes hose to glue machine Type XV-460-57TQB-1-1R-4 (sn: 101000018234)

140

Morgan's Fabricating & Welding Company Infeed Transfer Deck
Part of Entirety. 9' 3 strand 55" arms with rubber chain, gear motor drive, power feed roll

141

Morgan's Fabricating & Welding Company Veneer Placement Table
Part of Entirety. 12'x18".

142

Morgan's Fabricating & Welding Company Glue Press Roll System
Part of Entirety. 30', 15" rolls, air hold downs, controls as marked, no outlet wire included cut 6" above box

143

Glue Line Entirety
Lots 136-142 with a 10% raise to open the bid.

139

Drums of Adhesive
55 gallon, (11). Check back for updates and pictures.

144

Morgan's Fabricating & Welding Company Belt Conveyor
12'6"x12', gear motor drive, controls attached

145

Nordson Altablue 16TT Filler Station/Handgun System
(SN: NC18C00652) includes melting pot, (2) applicator guns, (LU17H40674), controls as marked

146

Morgan's Fabricating & Welding Company Belt Conveyor
25'x50", gear motor drive, controls attached, emergency stop

147

Morgan's Fabricating & Welding Company Belt Conveyor
25'x84", gear motor drive, controls attached, emergency stop

148

Morgan's Fabricating & Welding Company Belt Conveyor
10'6"x84", gear motor drive, controls attached

149

150

Morgan's Fabricating & Welding Company Belt Conveyor
12'x54", gear reduction drive, controls attached

151

HOLZHER Kundig Brilliant 2-53RCd Wide Belt Sander
(sn: 27227), 54" capacity, 3 head

152

Morgan's Fabricating & Welding Company Belt Conveyor
12'x54", outfeed to sander, gear motor drive, controls attached

153

154

2017 Weining Unimat 818S Automatic Planer & Moulder
(SN: C04146) 6 head machine, 12" capacity, Machine #123655, controls as marked. To include pipe to manifold an manifold to 1st corrugated pipe.

155

Infeed Table
9' with power roll includes 3 strand 56" transfer with 3" plastic chain, controls attached.

156

Morgan's Fabricating & Welding Company Belt Conveyor
7'6"x12", outfeed, gear motor drive

157

Morgan's Fabricating & Welding Company Belt Conveyor
23'x9" within the 23' is a 6' incline sections, gear motor drive, controls attached

158

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", gear motor drive, controls attached

159

Cantek CFS-100 Cutoff Saw
Computer Controlled Optimizing, (sn: 0617100015), 4"x12" capacity, 4" thickness capacity, 4' infeed & 40" outfeed, controls as marked

159A

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

160

Morgan's Fabricating & Welding Company Belt Conveyor
15'x12", infeed, gear motor drive, controls attached.(16)

161

Morgan's Fabricating & Welding Company Belt Conveyor
16'x12", outfeed, gear motor drive, controls attached.(17)

162

Morgan's Fabricating & Welding Company Belt Conveyor
16'x96", incline, gear motor drive, controls attached. (18)

163

Hasko MPEN-C-33-O-LP End Matcher
Head Serial number (sn: 1770004-G) (sn: 170004-T) 94" wide bed, 24' bed overall length, includes control panel

164

Hytrol Waste Conveyor
Incline, 7'x12" slat belt, gear motor drive

159B

Hytrol Incline Waste Conveyor
9'x18, gear motor drive. Portable.

165

Hytrol Waste Conveyor
Incline, 7'x12" slat belt, gear motor drive

166

Morgan's Fabricating & Welding Company Belt Conveyor
Incline, 12'x36" gear motor drive, controls attached.

167

Morgan's Fabricating & Welding Company Belt Conveyor
20'x8', gear motor drive, controls attached.

169

171

Morgan's Fabricating & Welding Company Scissor Lift
17'x42", 8,000 capacity, foot operated

172

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

173

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

174

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4,500lb capacity, foot operated*

175

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated*

176

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated. *

177

Morgan's Fabricating & Welding Company Scissor Lift
8'x4', 4500 lb. capacity, foot operated.*

200

201

Morgan's Fabricating & Welding Company Belt Conveyor
Part of Entirety. 9'6"x54", gear motor drive, controls attached.

203

205

Stanza Machinery Company Applicator
Part of Entirety. STM, Model STR52-2, (sn: 171509) 2 station, 52" wide capacity, controls attached, control panel. (Corp Label: D1).

206

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171531), 6'x52" controls attached, seamless rubber belt. (Corp. Label 3).

207

209

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-3, (sn: 171510), control console included. To include 22" Vacuum blower, Model HP-6C-22 (Corp. label F1).

210

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-3, (sn: 171516), 3 lamp, (Corp. label GI).

211

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, Model STC52-1, (sn: 171534), 36"x52", controls attached, seamless rubberized belt, (Corp. label 4).

211A

1st Sander Line entirety
lots 200-211 tied together with a 10% raise to open the bid.

212

2017 Infinity, 3 head Buffer
Part of Entirety. Control panel as marked. (sn: AB-0122) C2 Corp label. To include 22" vacuum blower, no inlet/outlet pipe included.

213

Stanza Machinery Company Belt Conveyor
Part of Entirety. Model STC52-2, (sn: 171522), 6'x52", controls attached, seamless rubberized belt, (Corp. label 5).

214

Stanza Machinery Company Applicator
Part of Entirety. Model STF52-1, (sn: 171514), Single, controls attached, (Corp. label D2).

215

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 1715112), 36"x52", controls attached, seamless rubberized belt, (Corp. label 6).

216

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-3, (sn: 171511) 52", 3 lamp, controls attached, (Corp. label G2).

217

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, STC52-1, (sn: 171515), 3'x52" controls attached, seamless rubberized belt, (Corp. label 7).

216A

Sander line #2 Entirety
Lots 212-216 tied together with a 10% raise to open the bid.

218

2017 Infinity 3S1350 Buffer
Part of Entirety. Alpha Brush (sn: AB-0123) with vacuum blower, (Corp. label C3).

219

Stanza Machinery Company Belt Conveyor
Part of Entirety. Model STC52-2, (sn: 171526), 6'x52", controls attached, seamless rubberized belt, (Corp. label 8)

220

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, single, control console attached. (Corp. Label D3).

221

Electric Box
Part of Entirety. No wire or conduit included.

222

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171530), 3'x52" controls attached, seamless rubberized belt, (Corp. label 9).

223

Stanza Machinery Company UV Oven
Part of Entirety. Model ST052-1, (sn: 171521) 52", 2 lamp, controls attached. (Corp. Label G3).

224

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171518), 6'x52" controls attached, seamless rubber belt. (Corp. Label 10).

225

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171523), single, control console attached. (Corp. Label D4)

226

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171520), 3'x52", controls attached, seamless rubberized belt. (Corp. label: (11).

227

Stanza Machinery Company UV Oven
Part of Entirety. Model ST052-2, (sn: 1715253), 2 lamp, controls attached. (Corp. Label G4).

228

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, 6'x52" controls attached, seamless rubberized belt. (Corp. label 12).

229

Stanza Machinery Company Applicator
Part of Entirety. STM,model STR52-1, (sn: 171527), single head. (Corp. label D5).

230

Infinity Alpha Brush Buffer
Part of Entirety. (sn: AB-0124), With vacuum blower. (Corp. label E2).

231

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-2,(sn: 171540), control console included. (Corp. label F2).

232

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-4, (sn: 171529), 4 lamp, controls attached, (Corp. label G5)

233

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171517), 3'x52", seamless rubberized belt, controls attached. (Corp. label 13)

233A

Entirety Lot of 1st line only
Lots 200-233 with 10% raise to open the bid.

234

235

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171532), 6'x52", seamless rubberized belt, controls attached. (Corp. label 14).

236

Infinity 4S 1350 Alpha Brush Deduster
Part of Entirety. (SN: AB0127 ) 4 head with vacuum blower. (Corp. label C4).

237

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171536), 6'x52", seamless rubberized belt, controls attached. (Corp. label 15). Part of Entirety.

238

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 177537), single head. (Corp. label D6).

239

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-1, (sn: 171524), 6'x52", seamless rubberized belt, controls attached. (Corp. label 16).

240

Stanza Machinery Company UV Oven
Part of Entirety. STM, Model ST052-2, (sn: 171525), 2 lamp, controls attached, (Corp. label G6).

241

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-4, (sn: 1715238), 6'x52", seamless rubberized belt, controls attached. (Corp. label 17)

242

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7).

243

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, Model STC52-2, (sn: 171513), 6'x52", seamless rubberized belt, controls attached. (Corp. label 18).

244

Stanza Machinery Company Applicator
Part of Entirety. STM, model STR52-1, (sn: 171533), single head. (Corp. label D7).

245

Infinity 1S 1350 Alpha Brush Buffer
Part of Entirety. (SN:AB-0126) with vacuum blower. (Corp. label E3).

246

Stanza Machinery Company Stain Wiper
Part of Entirety. STW52-5, (sn: 171528),control console included. (Corp. label C5).

247

Stanza Machinery Company Belt Conveyor
Part of Entirety. STM, model STC52-2, (sn: 171508) 6'x52", seamless rubberized belt, controls attached. (Corp. label 19 ).

248

Stanza Machinery Company UV Oven
Part of Entirety. STM,model ST052-4, (sn: 171542), 4 lamp, controls attached, (Corp. label G7).

249

Finishing Line Entirety of 2nd line
Lots 234-249 with a 10% raise to open the bid

250

Morgan's Fabricating & Welding Company Belt Conveyor
44"x48", standard rubber belt, controls attached. (Corp. label 20). Part of Master Tie back.

251

Morgan's Fabricating & Welding Company Belt Conveyor
40"x84", standard rubber belt, controls attached. (Corp. label ). Part of Master Tie Back

280

Finishing Line Master Entirety
Lots 200-280 with a 10% raise to open the bid.

281

Storage Cabinet
(2) flammable liquid units

290

290A

6'x28" Belt Conveyor
With steel sides, gear motor drive, controls attached, foot controller.

291

Belt Conveyor
Approx 36' stainless steel 12", gear motor drive, support to ground to include loading bin for brickette machine.

292

Stainless Steel Conveyor
75'x12" with gear motor drive, support to the ground. Includes 2 spare sections on conveyor frame. Located outside on the ground.

300

252

New parts in crate
Details and Pictures to follow. Part of Master Tie Back

301

Daniels Fans Blower
Part of Entirety. B1F930, Order # 1707736, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe.

302

Siemens Motor
Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect.

303

Soft Start Starter
Part of Entirety. Used for 150 hp blower motor. Marked for #1 Dust System. On back wall.

305

306

Dust System #1 Entirety
Lots 300-305 tied together with a 10% raise to open the bid.

310

311

Daniels Fans Blower
Part of Entirety. B1E930, Order # 1707737, 60". To include 44"x31" exhaust baffle, 36" infeed. Does not include any infeed pipe.

312

Siemens Motor
Part of Entirety. 150 HP, 1775 RPM, incudes 400 amp Siemens disconnect.

313

Soft Start Starter
Part of Entirety. Used for 150 hp blower motor. Marked for #2 Dust system. Located on back wall.

315

304

Soft Start Starter
Part of entirety

316

Dust System #2 Entirety
Lots 310-315 tied together with a 10% raise to open the bid.

317

Ladder and Catwalk
Part of Entirety. System for Dust System #1 and #2

318

Clarke's Pyro Guard Spark Detection and Fire Suppressor System
Part of Entirety. To include control boxes and sensors in and on the dust pipe system.

319

Hyfab MVP Sprinkler System
Part of Entirety. Model MVP-850-460, Product- PRD-21498-01 for dust system.

320

325

Dust System Master Entirety
Lots 300-321 tied together with a 10% raise to open the bid.

318A

Allen Bradley Motor Control Box

326

314

Soft Start Starter
Part of entirety

327

328

Atlas Copco Air Dryer
Model 0SC825, Quality Air Solutions

329

Reserve Air Tank
165 PSI, Disconnect at 1st joint. No pipe. Located at back of warehouse.

330

331

Morgans Fabricating & Welding Co. Dust Unloading System
92"x110" dust bin, 12'x14" auger system, controls as marked

333

334

Morgans Fabricating & Welding Co. Dust Unloading System
92"x110" dust bin, 12'x14" auger system, controls as marked

321

Soft Start Starter
inside, details to coming soon.

334A

15 hp Hydraulic Unit*
operates the two walking floor trailers includes motor controls attached and hydraulic hoses to trailers.

335

Motor Control Panel
For Trailer Dust System to include 100 amp safety.

340

Siemens Switch Board
1st lot of entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330.

341

Aluminum Wire Tray
Part of Entirety. 480' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line.

328

Air Compressor
Details to follow

342

2017 Spectra Series Busway 3000 amp
To include (30) 10' bus sections, (41) misc. size disconnects. All installed in 2017.

329

Air Compressor
Details to follow

343

Siemens Switch Board
Part of Entirety. 3000 amp main disconnect, 480 volt, CAt SB3-REV.A, Model WLL2F330.

344

Aluminum Wire Tray
Part of Entirety. 340' (19) runs of aluminum wire includes aluminum wire tray to bus bar system over the cut up line.

345

2017 Spectra Series Busway 3000 amp
Part of Entirety. To include (30) 10' bus sections, (39) misc. size disconnects. All installed in 2017.

346

Wire
Part of Entirety. From Individual Equipment to disconnects.

347

Electrical Entirety Lot 340-346
Tied together with 10% raise to open the bid.

348

Spectra Series Busway
(10) 10' sections of spares, 3000 amp. Uninstalled. Most are used and some say "bad".

349

Aluminum Wire
(15) partial rolls of Camerony 750 MCM, 600 volt.

349A

Electrical
To include New Buss Bar Electric boxes, various sizes.

350

Pallet of Rip Saw blades
(13) plywood rip saw blades, (1) hogger blade

351

352

Weining Moulder Parts
On pallet to include rollers, segmented wheels, (2) setting devices, (4) guards.

353

354

Plastic Belt for Hasko Endmatcher
36", (www.reginachain.net), box of chain segments on pallet.

355

New/Used Air Regulators
And wheels on pallet.

356

Mostly New Speed Drives
On pallet

357

358

New/Used Misc. Parts
On pallet.

359

(2) pallet of Nordson Glue Parts
And Defect Filler, includes hoses, guns, and end dams.

360

Misc. Bearing
On pallet to include (4) dust collection Dodge Pillow Block bearing for dust collector van.

361

(3) Grease Guns and Grease

362

Misc. New/Used Parts
To include sprockets, (3) boxes of sand paper for hand scraper.

363

Parts for Chop Saw
to include glue roll on pallet.

364

Pallet of Chain
To include paddle chain for 12" dust conveyors, (1) box of specialized roller chain.

365

Pallet of Belts
Various sizes.

366

Pallet of Motors
to include (1) 15 hp motor, Dodge Speed reducer, 5.5 KW motor, and air valve.

367

Rubber Belting
For Glue Line equipment on pallet.

368

(3) Pallets of Dust Collector Pipe

369

Capacitor
New, 15 KW.

370

Pallet of Misc.
To include lift gate and guards.

371

Box of 3M Buffer
New.

372

(3) 54" Rubber Belting
New.

373

(4) 6' West Rock Rubberized Belting
New.

374

Glue Roller
6"x14"

375

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

376

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

377

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

378

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

379

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

380

Glue Roller
37"x15"x15"

381

Roller for Timesaver
54"x6"

382

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

383

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

384

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

385

CATO-CT01R Regrind OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

386

Rollers for Conveyors
(1) 97"x8", (1) 55"x8", (1) 37"x3"

387

Roller for Costa
ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end.

388

Crate of Costa Rollers
to include (1) ROLLO-CONT COMM C250-1350, 7"x10"x57", Robber coated, V-grooves on end, (8) 58"x3" rolls, mm62x73x14.70, Disigno 12DA03780.

389

54" Costa VSL1212.7 Feed Belt
in crate.

390

(2) New Stanza Buff Rollers
in crate.

391

(2) Finzer Buff Rollers
Part 36354164-4 in crates.

392

Finzer Rubber Coated Roller
57"x10"

393

Finzer Chrome Roller
57"x6"

394

Finzer Sponge Roller
57"x10"

395

Crate of Costa Parts
To include guard.

396

Costa Parts in Crate
To include New Feed belt VSL008722, (2) 57"x3" Chrome Rollers

397

(4) Costa Chrome Rollers
56"x6" in crate

398

Costa Used Roller with guards
54"x8"

399

CATO-CT02 Recover OEM Style Coater Roll
8.500x9.500x57.00 Rubber Coater.

400

Sand Paper
All pallets to include 52"x103", 52"x75", 53"x 128" various grit. In boxes and on rack. Does not include rack.

401

Misc. parts
To include roll and guard.

Cabinets To GoListing ID#: 569123

Free Email Notifications

Bidder Terms and Conditions

Share This Listing

Other Sales byThis Company

Sponsored Links

Cabinets To Go

Bidder Terms and Conditions

Login

Sign Up

Sign Up

Login

Bidder Terms and Conditions

Cabinets To Go
Listing ID#: 569123

Other Sales by
This Company