Cogar Lumber & Cogar Enterprises Ring #1
Listing ID#: 591055

Sale Location

Calvin, WV 26660
Sale Dates and TimesSALE IS COMPLETED
Friday Jun 9, 2023 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions


Bidder Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.

“Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.

“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.

"Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.

  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!


 

00
Information Lot
Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!
HIGHLIGHT PIECES: 5 dozers, 6 excavators, 4 late model John Deere skidders, 3 late model stump grinders, trucks trailers and much more.

01
Preview Information
Week of the auction from 8 AM to 4 PM. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information

03
Payment Information
. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

90
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

99
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1000
Wells Metal Cutting Band Saw
Model 8-M-43, SN 5710, 18'' width capacity, electric drive

1001
Welding Cart
includes empty tank of compressed gas, N.O.S., 26'' x 36'' x 33'' cart, mounted on casters

1002
Air Compressor
10 hp electric motor, 22'' x 68'' horizontal tank

1003
Drill Press & Steel Bench
no drive, 8'' x 29'' bed on press, 37'' x 7' x 32'' tall table

1004
Steel Table
Includes (2) 12" x 34" x 42" tall bolt organizers

1005
Warner & Swasey 2A Machinist Lathe
SN 607369-2431333, Model M-510, electric drive, includes all parts, steel & drills in bed under lathe, 3 jaw chuck, 6' beds, 5 head rotating drill holder, 7' x 12' x 80'' tall overall

1006
Steel Table
37'' x 80'' x 32'' tall

1007
Shelf with Parts
40'' x 10' x 6' tall, grinding wheels, pipe fittings, electrical components

1008
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1009
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1010
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1011
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1012
60'' Circle Saw
missing some shanks & bits, 2'' eye

1013
56'' Circle Saw
2'' eye, broken shanks & bits need repaired

1014
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1015
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1016
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1017
56'' Circle Saw
F7 style, 2'' eye, broken

1018
56'' Circle Saw
2'' eye, no shanks or bits, broken

1018A
Assorted Saw Blades
(8)-20'' blades, 5 1/2'' arbor, (12)-22'' blades, 6 1/2'' arbor, (10)-24'' blades, 1 1/4'' arbor

1018B
Assorted Saw Blades
(5)-24'' blades, 1 1/4'' arbor, (7)-20'' blades, 4'' arbor, (9)-20'' blades, 6 7/8'' arbor

1018C
Pallet of 18" Blades
(2) boxes, (16) blades/box, 4 3/8" eye, 32 total appear to be new in box

1019
Pallet of Air & Hydraulic Cylinders

1020
Pallet of Hydraulic Hoses

1021
Pallet of Lights

1022
Pallet of Electrical Parts
breakers & switches, control stand

1023
Pallet of Electrical Parts
breakers, switches, fuses, & wire, Remington 16'' electric chain saw with no blade

1024
Pallet of Electrical Parts
switches & breakers

1025
Pallet of Electrical Parts
breakers, switches, fuses, conduit parts, also includes bolt organizers

1026
Pallet of Electric Motors & Lights
(2)-5 hp motors, (1)-3 hp motor, (2)-0.5 hp motors

1027
Conduit Pipe Bender & Pipe Vise

1028
Pallet of Bushings, Pulleys, & Sprockets

1029
Pallet of Chains
brand new 10' section of roller chain, bearing, bucket of bolts, 2 hp motor with gear box

1030
Pulley & Air Valve
32'' single groove pulley, 2 7/8'' eye on pulley

1031
Bolt Organizer Bins
(5) pieces at-12'' x36'' x 22'' tall

1032
Pallet of Electrical Boxes
starters, disconnects, & breakers

1033
Pallet of Parts
air cylinders, air valve, hydraulic pump, electrical parts & fuses, & conduit fittings

1034
Pallet of Parts
belt lacing, electrical parts, bearings, & pipe fittings

1035
Pallet of Parts
roller chain, gear chain, bearings, & sprockets

1036
Pipe Threader Pallet
pipe bender, tap & die kit, strapping tool, 8'' flat fish tape

1037
Pallet of Parts
pipe fittings, bushings, sprockets, washers & bolts, conduit parts

1038
Box of Bushings & Pipe Fittings

1039
Pallet of Chain Hoists
(2)-10 ton, (1)-3500 lb.

1040
Pallet of Electrical Parts
breakers, switches, & electrical boxes

1041
Pallet of Electrical Parts
motor starters & cut-offs

1042
Pallet of Electrical Parts
also includes air valves

1043
Conveyor Belts
(1)-24'', (1)-48'', lengths unknown for the others

1044
Pallet of Ladder Back Chains
12'' wide, lengths unknown

1045
30'' Tower Edger
(2)-14'' blades, 1 movable, includes 10 hp motor, 3' x 10' wooden frame, infeed rolls, frame needs redone

1046
6' Band Wheel
spoked, 10'' wide, includes steel coupling, fits Salem line bar resaw

1046A
Conveyor Belt
14'', length unknown

1046B
Frick Mandrel Shaft
2 3/16'' x 5', 30'' 8-groove pulley

1046C
Conduit
4' x 80'' lumber rack filled with assorted metal & PVC conduit

1046D
Lumber Rack with Conduit and Drain Tile
4' x 54" x 3' tall rack

1047
Steel Shelf
3' x 9' 6'' x 9' tall

1048
Steel Shelf
3' x 9' 6'' x 9' tall

1049
Steel Shelf
3' x 9' 6'' x 9' tall

1050
Bolt Bin Organizers
2 pieces-both 12 x 34 x 42'' tall, includes all fittings in organizers

1051
Wooden Shelf & Contents
9 x 93 x 50'' tall, includes all contents, conduit parts, electrical components, light bulbs, Also includes pallet of electrical wiring under shelf.

1052
Pallet of Nuts, Bolts, & Pipe Fittings

1053
Pallet of Nuts, Bolts, & Pipe Fittings

1054
Pallet of Bolts, Pipe Fittings, & Wire

1055
Pallet of Nuts, Bolts, & Nails

1056
Pallet of Bolts & Pipe Fittings

1057
Pallet of Nuts, Bolts, & Lags

1058
Pallet of Bolts, Pipe Fittings, & Electrical Parts

1059
Pallet of Bolts, Nuts, Pipe Fittings, & Electrical Parts

1060
Pallet of Electrical Boxes

1061
Diesel Transfer Tank
24" x 42" x 24"

1062
Pallet of Air and Hydraulic Cylinders

1063
Pallet of Shovels
Includes hoes and pickaxes and scrapers

1064
Pallet of Shovels
Squegee, scrapers, hoes, and pickaxes

1065
Pallet of Shovels
Scrapers, garden rake, hoes, pickaxes

1066
Conveyor Belts
(1) 24", (2) 7", lengths unknown

1067
Cleated Conveyor Belts
(1) 24", length unknown

1068
Conveyor Belts
(2) 6" lengths unknown

1069
Pallet of Hydraulic Motors

1070
Ingersoll Rand Portable Light Tower
SN: 421167ULUD92, Model: LS6CHZT4F, Meter reads: 8,100 hours, 2011 model, Kubota 1.1 Liter Diesel Engine, 12.6 KW, 175/80D13 tires, pintle hitch. 

100
HMC Rosserhead Debarker
(1st lot of an entirety) Model: V-216H, SN: 1173-79, 6' x 8' x 7' tall wooden cab with controls and electrical boxes, 30 hp electric motor on head, 3 x 24" bull wheels, 7' x 26', includes catwalk around debarker, infeed deck, and cab, 10 hp hydraulic pack, hydraulic cylinders on log kickers.

101
4-Strand Log Deck with Stop'N'Load
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

102
Hourglass Roll Case
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

103
Chain Waste Conveyor
(Part of entirety) Electric drive, 2 strands of 12" ladder back chain, 36" pan, 20" sides, 50" x 84' long, includes slide pan under debarker.

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
5-Strand Log Deck
15'6" x 42', electric drive, 4" chain, includes cat walk on side and support steel to ground.

106
5-Strand Log Deck
4" chain, 13'6" x 50', electric drive, 4' nose skid, 5 arm stop'n'load, includes support steel to ground.

107
6' Bar Type Log Turner
Hydraulic drive and cylinder.

108
Salem 3 Head Block Carriage
(1st lot of an entirety) 9' x 18', first to second head is 7', second to third is 4', Salem setworks, heads are filer and stole, 1 1/2" dogs, air dogs air over 110 setworks, 4 axel, includes pentagram, includes controls in cab.

109
Carriage Track and Frame
(Part of entirety) 75" on center, 60' long, include structural steel to ground, includes rub rail, includes pullies mount in track, does not include cable, hydraulic cylinder on tensioner.

110
Carriage Feed and Drive
(Part of entirety) 100 hp electric motor, 230 V, includes large gear box 11.424 to 1 gear box, 1" steel cable, includes steel frame, 16" fan blower with electric drive mounted to motor.

201
2006 Bobcat T190 Skid Steer
SN: 531614965
Meter reads: 2,492 hours
Engine: 4-cylinder Kubota
Fuel type: Diesel
ROPS: Open sided cab, no door
2 Speed: No
Highflow: No
Attachments: 6' bucket
A/C: No
Heater: No

Features and Notes: 16" tracks, hand and foot controls. Runs and operates great.
 

111
40 Hp Hydraulic Pack
(Part of entirety) 2' x 5' x 2' tank, PVR50 hydraulic pump, includes all valves, and hydraulic lines running to machine.

206
Volvo L70D Wheel Loader
SN: L70DV19193
Meter reads: 18,156 hours
Engine: Volvo Diesel - 126 hp - model: TD63KGE
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: yes
Center to center of pins: 20 1/2"
Lift capacity: 13,400 KG
Tire Size: 20.5-25 air tires
Attachments: Rockwell grapple forks 7 x 45" forks, 6' wide
Heater: yes
A/C: yes
Quick Attach: yes

Features and Notes: Freshly serviced, runs and operates good.

112
Slab Dump
(Part of entirety) 24" belt, air cylinder, electric drive, 22" x 15'.

207
Allis Chalmers 940 Wheel Loader
SN: 940-1438
Meter reads: 8,034 hours
Engine: Allis Chalmers - SN: 2900MK1
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
3rd Valve: no
Tire Size: 17.5-25 air tires
Attachments: 94" bucket, 4 x 60" forks, 64" wide, both pin through
Heater: yes
A/C: no
Quick Attach: no

Features and Notes: Freshly serviced and painted, runs and operates good. 

113
Operators Cab
(Part of entirety) 5' x 6' x 7', includes catwalk and steps around cab

214
2004 Prentice 384D CMS Knuckleboom
SN: D384PR60124
Meter reads: 15 hour, rolled over
Engine: Cummins
Fuel type: Diesel
Continuous Grapple: Yes, 56" max width
Trailer: 2004 Evans
Delimber: CSI delimber
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Fully enclosed cab with pilot joystick control, 11R22.5 tires. 

114
Carriage Entirety of Lots 108-113
With 10% raise.

214A
CSI DL 4400 Buck-Saw
SN: 4413042714, direct drive, 48" cutting bar, 6' x 18'8" log rack.

114A
Vertical Air Tank
40" diameter 9' 6" long.

215
Hawker Siddeley C6D Cable Skidder
SN: B601-004, Meter reads: 9014 hours, Detroit Diesel Engine (Model 50437000, SN: 4D0206214), manual transmission, 23.1 - 26 air tires, 8' blade, winch with 1/2" cable (SN: 7187), freshly serviced and painted, runs and operates good.

115
Salem 7' Head Rig
13" x 7' band wheels, spoked wheels, 1' mead on top wheel, 2' x 4' off bear belt, no belt, weight strain, lineal positioning cylinder.

216
2014 John Deere 748H Dual Arch Grapple Skidder with Winch
PIN: 10W748HXHDD656748, 1000 hours on 6.8L JD Reman Engine, 12,900 hours total on machine, 30.5-32 air tires, set up for dual tires, heavy duty Sweda Axles, 9'8" blade, 11' max grapple, winch with 1" cable, fully enclosed cab with Heat/AC, radio, and joystick controls, good running machine, everything works as it should.

115A
15 Hp Hydraulic Pack
18" x 34" x 20" tank includes all lines to machine.

217
2010 John Deere 648H Dual Arch Grapple Skidder with Winch
PIN: 1DW648HXKA0628101, 35.5-32 air tires, Sweda heavy duty axles, meter reads 12326 hours, fully enclosed cab with heat/AC, joystick controls, suspension seat, radio, John Deere 6.8L diesel engine, no cable on winch, 11' max grapple, 9'8" blade, good running machine.

115B
Hydraulic Pack
7 hp motor, 2 hp motor, 16" x 24" x 12" tank, includes lines to machine.

218
2006 John Deere 748G III Dual Arch Grapple Skidder
PIN: DW748GX605217, 30.5-32 tires, 11' max grapple, 9'8" blade, John Deere 8.1L diesel engine, rated at 140 KW, meter reads 9370 hours, fully enclosed cab with heat/Ac, radio, and joystick controls, good running machine, everything works as it should.

116
4 Strand Transfer Deck
H78 chain, 11'6 x 40', missing chain on one strand, no drive.

225
2017 Prime Tech PT-300 Stump Grinder
SN: 00471, machine wight is 32090 lb., meter reads 3719 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display, and radio, 26" steel tracks, LED lights front and back, diesel engine rated at 275 hp, FAE mulching head made in 2018 (model: 300/SC-PT300, SN: 18-0438), weighs 5016 lb., 36" cutting wheel with teeth, in great condition, everything works as it should.

117
Salem Line Bar Resaw
(1st lot of an entirety) SN: 129301, hydraulic power feed rolls, 10" x 6' spoked band wheel, 3/4" mead, 3' x 9' infeed rolls, hydraulic cylinder on cart pusher, electric drive not included.

226
2017 Prime Tech PT-300 Stump Grinder
SN: 00448, diesel engine rated at 275 hp, machine weight is 31224 lb., meter reads 4203 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display and radio, 26" steel tracks, LED lights front and back, FAE Mulcher head (Model: 300/SC-PT300, SN: 15-0578), weighs 4788 lb., made in 2015, 36" cutting disc with teeth. In great condition, everything works as it should.

118
Shurman Infeed Rolls
(Part of entirety) SN: 1397-A, 8 1/2" x 51" rolls, 24" to 30" spacing, 5' x 21', 5' x 15' 5 strand pop up transfer, air cylinder on transfer, no drive.

235
2012 John Deere 850K WLT Dozer
SN: 1T0859KXVCE230386
Meter reads: 8,390 hours
Engine: JD 6068
Fuel type: Diesel
Blade: 13'4", 6 way
ROPS: Fully enclosed cab
A/C: yes
Heater: yes

Features and Notes: Air ride seat, hand controls, push button start, radio, 24" tracks, Carco winch with 1 1/4" cable, Model: H85-218V, SN: 1201688, starts right up, runs and operates great.

119
5 Strand Transfer Deck
(Part of entirety) 12' x 12', H78A roof top chain, electric drive.

239
1986 John Deere 850B Dozer
SN: T0850BF724766
Meter reads: 299 hours, rolled over
Engine: JD 6466, SN: SE6466A305048
Fuel type: Diesel
Blade: 12'10", 6 way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: Carco 60 winch with 1" cable, SN: 6-1549, 24" tracks, has small hydraulic oil leak.

119A
Operators Cab
6' x 7' x 8' tall, includes controls for resaw entirety, includes catwalk steps.

240
1994 John Deere 650 G Dozer
SN: T0650GW797393
Meter reads: 7,500 original hours!
Engine: 4045T JD engine
Fuel type: Diesel
HP: 99 hp
Blade: 10' 6-way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: 18" trucks, power shift transmission, rebuilt 4000 series John Deere winch with 5/8" cable, runs and operates great, was not used for logging, originially used on farm. 

120
Electric Motor
(Part of entirety) 100 hp, 900 rpm, 445T frame.

241
1975 John Deere 550 Dozer
SN: 550C317129T
Meter reads: 7,153 hours
Engine: 4-cylinder John Deere
Fuel type: Diesel
HP: Approx. 60
Blade: 8' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, hand controls, JD 3325 winch with no cable, 16" tracks, motor runs good, has bad transmission, is extremely weak in reverse. 

121
30 Hp Hydraulic Pack
(Part of entirety) Includes cooling unit and hydraulic lines to machine, 2' x 4' x 3' tank.

242
1995 John Deere 650G Dozer
SN: 815966
Meter reads: No meter
Engine: John Deere 4045
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, JD winch (SN: TOWM123007096) with 5/8" cable, freshly painted and serviced. Runs strong and operates great.

122
Resaw Entirety of Lots 117-121
With 10% raise.

243
2005 John Deere 550J LT Dozer
SN: T0550JX116794
Meter reads: 90 hours, rolled over
Engine: JD Power Tech 4.5L
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, John Deere winch with 5/8" cable. Runs and operates great. 

123
Cox Roll Case
10" x 30" rolls, 36" spacing, 4' x 70', electric drive, 10 strand pop up transfer, 42" x 30'

245
2014 John Deere 210GLC Excavator
SN: 1FF210GXKDE521816
Meter reads: 8,854 hours
Engine: JD 6.8L, Model: 6068HT086, made in 2013
Fuel type: Diesel
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 123571-1-1-3) 6' max grapple, 3' cutting bar, 28" tracks, cab has radio, pilot controls, and electronic display, freshly serviced and painted, runs and operates great, no issues, has forestry package.

124
5 Strand Transfer Deck
H78 chain electric drive, air cylinders on pop up board stop 13' x 18'6".

246
2013 John Deere 245G LC Excavator
SN: 1FF245GXHCE600057
Meter reads: 6,918 hours
Engine: Isuzu 16 valve, Model: AM-4HKIX, 128 KW
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: INV-055173), 6' max grapple, 3' cutting bar, 28" tracks, fully enclosed cab with pilot controls and electronic display, rearview camera, forestry package, freshly serviced and painted, runs and operates great, no issues. 

125
Cook Edger
Model: 36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, control panel, manual blade set, (2) 20" blades both are adjustable, electric drive.

247
John Deere 225D LC Excavator
SN: 1FF225DXKBD501826
Meter reads: 8,133 hours
Engine: Isuzu 16 valve
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 106333-1-1-3), 6' max grapple, 3' cutting bar, 24" tracks, fully enclosed cab with pilot controls, radio electronic display, forestry package, freshly serviced and painted, runs and operates great

126
5 Strand Transfer Deck
H130 roof top chain, 15" x 40", includes catwalk on side, electric drive, slant loading deck.

248
2000 John Deere 200 LC Excavator
SN: FF0200X501501
Meter reads: 14,150 hours
Engine: JD 6.8L Power Tech
Fuel type: Diesel
Bucket: Eaco 40" with 5 teeth
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: 32" tracks, fully enclosed cab, freshly serviced and painted, starts and operates great.

127
4 Strand Unscrambler
33" slats on each strand, electric drive, 7' 6" x 18' 6" x 80" tall.

255
2002 International 4800 Truck, VIN # 1HTSEAAR82H409075
Mileage: 62,170 miles
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
GVWR: 35,000 lb
Transmission: 6 speed Eaton Fuller
Front axle rating: 14,000 lb.
Rear axle rating: 21,000 lb
AC/Heat: yes
VIN #: 1HTSEAAR82H409075

Features and Notes: 11R22.5 tires, 8' x 16' service bed with boxes, pintle hitch, overhead rack above cab, 4x4, has outriggers, winch with 1/2" cable on front of truck, HI Ranger 5FC-55 fiberglass boom, SN: 2010416814, 55' max reach, 700 lb bucket capacity, 12V power hydraulic controls, 2' x 4' x 42" deep bucket. 

128
Hemco 12 Head Drop Trim Saw
24" saws, electric drive, air cylinders, 17' x 26' overall, 16' 6" x 22" 10 strand transfer, deck feed with rolls, electric drive, includes electrical boxes, 2' x 24' waste conveyor with electric drive.

256
Peterbilt 249 Concrete Mixer Semi Truck
VIN: 1XP4MAOXXFN191512
Meter reads: 120, 478 miles
Engine: Cummins Diesel
Transmission: 8 speed Eaton Fuller
Heat/AC: no

Features and Notes: 11R22.5 tires, includes (3) 4' concrete chute sections, McNeilns 10 yard concrete mixer, SN: 7109, 450" drum volume, 10 yard mix capacity, 100 gallon water tank capacity.

129
8 Strand Transfer Deck
Electric drive, H78 chain with 2" pegs on 38" spacing, 14' x 24'

257
1998 Volvo ALC 63 Log Truck, VIN: 4VHSCBJC9WN518560
VIN: 4VHSCBJC9WN518560
Meter reads: 692,509 miles
Engine: N14 Cummins-525 hp
Transmission: 10 speed Eaton Fuller
Suspension: Hendricks
Heat/AC: Yes, has it equipped but AC doesn't work
Full lock in rears: Yes
Double frame: Yes

Features and Notes: Rockwell 46 rear end, 8' x 23' 6" log bed, 88" wide x 90" tall log bunks, 5.56 ratio on rear end, 11R24.5 tires on rear, 385R22.5 tires on front, tri-axle, good running truck.

130
6 Strand Transfer Deck
17' x 27' 6", electric drive, includes support steel to ground.

258
2003 Chevrolet Silverado 3500 Flatbed Truck, VIN # 1GCJK39133E273422
Mileage: 217,873 miles
Engine Type: 6.6 Durmax
Fuel Type: Diesel
Transmission: 6 speed manual
GVWR: 11,400
Heat/AC: Yes
VIN #: 1GCJK39133E273422

Features and Notes: 8' x 8' 6" flatbed with 12" sides, LT265/75R16 tires, 2" hich receiver, dually, a good running truck.

131
5 Strand Green Chain
14' x 82', electric drive, roller chain on outside strands

259
2003 Chevrolet 3500 Flatbed Truck
VIN: GBJK344X3E299683, 162119 miles, 6 speed manual transmission, 6.0L Vortec gas engine, dually 8' x 12' flatbed with 11" wooden sides, single cab, toolbox under bed, LT265/75R16 tires, (2) 2" hitch receivers, good running truck.

131A
Electrical Boxes
Includes all electrical panels on upper level of building as marked and pictured, does not include any conduit.

261
1997 Ford LTL 9000 Semi Truck
VIN: 1FTYA90U7VVA04578
Meter reads: 760,452 miles
Engine: Cummins N14, 475 hp
Transmission: 10 speed Eaton Fuller
GVWR: 50,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 22,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: No PTO, dual axle, Hendricks Spring suspension, 44 full lock rears, single frame, 11R24.5 tires all around. Good running truck.

132
Chain Waste Conveyor
14" ladder back chain with flights, 24" pan, 18" sides, electric drive, 45" x 148', includes catwalk steps and slide pans

260
2008 Chevrolet 2500 HD Flatbed Truck
VIN: 1GCHK23697F563872, GVWR: 9200 lb., 188171 miles, 6.0L Vortec gas engine, automatic transmission, crew cab, 7' x 8' aluminum flatbed with toolbox steel front bumper, LT265/75R16 tires. Good running truck.

133
Electric Motor Unit
250 hp general electric with 6335S frame, 180 kw 1180 rpm general electric, 3 kw 1800 rpm general electric, 5 kw 1200 rpm general electric, 42" x 10' x 50" overall size.

262
2005 Chevrolet Silverado Pickup Truck, VIN # 1GCHK23U75F905010
Mileage: 127,336 miles
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 9,200 lbs.
Transmission: Automatic
VIN #: 1GCHK23U75F905010

Features and Notes: will have new injectors by auction day, 4WD, new battery, 265/75R16 tires, crew cab, 8' bed, steel bumper on rear, 105 gallon diesel, transfer tank with 12V pump, includes toolbox on bed.

134
Belt Conveyor
21" belt, 30" pan, 14" sides, 42" x 62' electric drive.

263
2000 Chevrolet Silverado Pickup Truck, VIN # 1GCGK29U8YZ218916
Mileage: 124,037
Drive Line: 4WD
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 8,600 lbs
Transmission: Automatic
VIN #: 1GCGK29U8YZ218916

Features and Notes:265/75R16 tires, crew cab, 8' bed, 105 gallon diesel transfer tank with 12V pump, includes 3 toolboxes mounted in bed, 2" hitch receiver, New rocker panels will be installed before auction. 

135
Precision Chip Sorter
80" x 8', electric drive.

271
2003 Talbert Lo-Boy Trailer
VIN: 40FS0442831022254, Model: TDW-34SA-HRG-1-T1, GVWR: 84,120 lb., 255/70 R22.5 tires, 35 ton capacity, hydraulic cylinders for detach, 102" x 18'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, freshly sand blasted and painted.

136
Double Paddle Chain Conveyor
Electric drive 32" x 8', includes slide pan, 2' pan, 26" sides, H78 chain 2" x 11" paddles

272
1996 Fontaine Lo-Boy Trailer
Hydraulic cylinders for detach, 102" x 21'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, 35 ton capacity. Freshly sandblasted and painted.

137
Syncro Shear Vibrating Conveyor
SN: C2521-1, electric drive, 20" pan, 14" sides, 28" x 47', includes fiberglass section and chipper infeed.

273
1997 Pitts Log Trailer
VIN: 1PELT4228VP970694, 92" wide x 82" tall log bunks, 40' long, 11R24.5 tires, air brakes, freshly sandblasted and painted.

138
MDI Vibrating Conveyor Metal Detector
Includes electric box.

274
Pitts Log Trailer
VIN: 1PELT4221TP960992, 92" wide x 90" tall log bunks, 43' long, 11R24.5 tires. Freshly sandblasted and painted.

139
Fulghum 60" 8 Knife Chipper
SN: FIFIL1279, Model: 60 81, 700 rpm, electric drive not included, bottom outfeed, includes surrounding catwalk.

275
CAT 3304 Portable Genset
Engine Model: 3304D1, SN: 83703138, 466 original hours! Engine rated at 165 hp, has always been stored indoors, Generator Model: SR-4, SN: 9AB00958, mounted on 7' x 13' 6" long trailer with pintle hitch, 205/75R14 tires, in great condition, starts right up and runs strong, master battery, disconnect switch. 

140
Toshiba Electric Motor
250 hp, 460 V, 505 UZ frame, 1180 rpm.

276
1997 Eagle Transcraft Flatbed Trailer
VIN: 1TTF4820XV1052659
Model: Eagle W2-48X98
GVWR: 80,000 lb.
8' x 48', 285/75R24.5 tires, includes straps, frame will be freshly sandblasted and painted by auction. 

141
Chain Conveyor
15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, includes catwalk.

291
2008 JLG Man-Lift
SN: 0300027659, Model: 600A, LP and gas powered, 2 wheel drive, 500 lb. basket capacity, 60' reach, does not have generator, 3' x 6' x 43" deep basket with controls, 14-17.5 pneumatic tires.

142
Rader Chip Auger
Electric drive, includes support steel to ground, 5' x 18 x 5' tall box.

325
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

143
Black Clawson Shaker Screen
SN: 3892-74, Model: 612, 78" x 18', electric drive, 11' tall.

326
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

144
Chain Conveyor
12" ladder back chain, 18" pan, 12" sides, 30" x 20' electric drive.

145
36" Blower
Electric drive, 14" x 16" top feed 13" outlet, 12' of dust pipe, 70 hp motor.

146
Paddle Chain Conveyor
H78 chain, 2" x 12" paddles, 14" pan, 9" sides, electric drive, 20" x 38'.

147
Paddle Chain Conveyor
24" pan, 16" sides, H78 chain, 2" x 12" paddles, 3' x 69' electric drive.

148
Chain Conveyor
12" ladder back chain, electric drive, 14" pan, 10" sides, 30" x 70'.

149
Paddle Chain Conveyor
3" x 13" paddles, 16" pan, 15" sides, includes slide pan and catwalk, electric drive, 20" x 108' long, includes support steel to ground.

150
Armstrong #6 RH Band Saw Sharpener
SN: 16154, electric drive, includes extra grinding wheels and all clamps and strands, Armstrong #58-B filing clamp, includes (1) 10" band on clamps.

151
Armstrong Band Sharpener
Electric drive, no clamps, includes moisture control cabinet.

152
Circle Saw Sharpener
8" grinding disc, 110 V plug in.

153
Hanchett Knife Grinder
Size-60-MG, Shop #20, electric drive, 8'4" bed, grinding wheel is chipped.

154
Thompson-Lane Saw Guide Milling Machine
SN: 776, Model: B, electric drive, mounted on top of 17" x 27" x 32" tall.

155
New Man G-132 Knife Grinder
SN: 12528, electric drive, 32" long knife capacity.

156
Shop Press
30" x 66" tall, no hydraulic jack included, rated for 30 tons.

157
Engine Hoist
Needs cylinder.

158
Cabinet with Parts
22" x 29" x 77" tall, grinding wheels, Strapping tool.

159
Hammering Block
14" x 60" x 5.5" block, includes (2) 30" x 45" x 45" steel stands, also includes 54" hydraulic cylinder.

160
Band Saw Blades
14 bands total, 9"-12" wide, fits 7' head rig, some sharpened.

175
Nicholson Ring Debarker
50" max log diameter, air cylinder on push down roll, 6' x 11'6" infeed log trough with 26" Anson chain, 30 hp hydraulic pack wit 24" x 54" x 24" tank, 3' x 6' x 2' hydraulic extra tank, includes Falk gearbox, shafts and sprockets, no drive included, dismantled and ready for loading.

176
Williams Patent Crusher and Pulverize Hammer Mill
SN: 19540, 30" x 32" top feed, 24 x 32" hammer head, bottom discharge, includes 3 extra screens, 6' x 11' x 4' tall with steel frame.

176A
Rechart 48" Chain Type Log Turner
Hydraulic drive and cylinder, brand new teeth and chain.

177
5 Strand Transfer Deck
No chain or drive, cut into sections, main deck is 14' 6" x 30' total, 5 strand 5' pop up transfer wit roller chain, includes shafts and sprockets.

178
Horizontal Air Tank
4' diameter, 12' long.

179
Horizontal Air Tank
40" diameter 9' 6" long.

180
Horizontal Air Tank
30" diameter 6' long

181
Vertical Air Tank
24" diameter 6' tall

181A
Catwalk Steps
38" x 9' 6" x 78" tall.

181B
Shop Press
Hydraulic cylinder and electric motor, 50" x 5' x 115" tall.

181C
Tyrone Berry Carriage Drive
Young cooling unit, 36" x 53" x 15" main tank, 30" x 36" x 18" auxiliary tank, no electric drive, has all pumps and gauges, condition is unknown.

181D
Skate Rolls
3 sections. (1) 20" x 9'8", 3 x 16" rolls, 18" spacing, (1) 20" x 10', 3 x 16" rolls, 18" spacing, (1) 21" x 6', 3 x 16" rolls, 18" spacing.

182
Roll Case
10 1/2" x 30" rolls, 36" spacing, includes gearbox but no motor, 4' x 31' 6" with frame.

181E
2 Strand Transfer Deck
32" x 16'6", no chain or drive, fits up to 4" wide chain.

183
Spiral Roll Case
8 1/2 x 42" rolls, 30" spacing, includes gearbox but no motor, 54" x 27'6".

184
Cox Roll Case
10 1/2" x 30" rolls, 36" spacing, 45" x 38' 6", includes gearbox but not motor.

185
Filer and Stowell Gang Edger
SN: E546305, (3) 20" blades, 2 moveable 5 x 64" infeed capacity, no drive included, 5' x 11' infeed rolls, manual blade set, 54" x 22' 6" split Roll Case outfeed with electric drive, air cylinders on board pushers, good feed rolls

186
Belt Conveyor Frame
No drive, belt, or chain. 28" pan, 19" sides, (4) 20" sections, 80' total.

187
Fulghum Vibrating Conveyor
Includes drive, no motor, 18" pan, 9" sides, 33" x 14'.

188
Webster Vibrating Conveyor
No drive, 24" pan, 6" sides, 33" x 10'.

189
Vibrating Conveyor Fiberglass Sections
(1) 18" pan, 9" sides, 33" x 5' long with 3' metal section, (1) 22" pan, 8" sides, 28" x 5' long, (1) 15" pan, 15" sides, 28" x 5' long.

190
Ederer 10 Ton Overhead Crane
SN: D-6544, 21' long.

191
Overhead Crane System
30' long, includes winch system with electric motor and 3/8" steel cable.

192
Steel Rack and Sawhorses
Rack is 5' x 7' x 8' tall, sawhorses are 2' x 26" tall, 42" wide at base

193
Corley Operator's Cab
4' x 54" x 105" tall, includes control panel and hydraulic levers.

194
Cummins 300 Power Unit with Hydraulic Unit
Big Cam, 12" x 43" x 19" hydraulic tank, hydraulic pump system, has been sitting for 3 years, ran good when last used. 

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Cogar Lumber & Cogar Enterprises Ring #1

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
14211 Webster RD
Calvin, WV 26660
Sale Dates and Times
Friday Jun 9, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!


 

00
Information Lot
Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!
HIGHLIGHT PIECES: 5 dozers, 6 excavators, 4 late model John Deere skidders, 3 late model stump grinders, trucks trailers and much more.

01
Preview Information
Week of the auction from 8 AM to 4 PM. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information

03
Payment Information
. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

90
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

99
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1000
Wells Metal Cutting Band Saw
Model 8-M-43, SN 5710, 18'' width capacity, electric drive

1001
Welding Cart
includes empty tank of compressed gas, N.O.S., 26'' x 36'' x 33'' cart, mounted on casters

1002
Air Compressor
10 hp electric motor, 22'' x 68'' horizontal tank

1003
Drill Press & Steel Bench
no drive, 8'' x 29'' bed on press, 37'' x 7' x 32'' tall table

1004
Steel Table
Includes (2) 12" x 34" x 42" tall bolt organizers

1005
Warner & Swasey 2A Machinist Lathe
SN 607369-2431333, Model M-510, electric drive, includes all parts, steel & drills in bed under lathe, 3 jaw chuck, 6' beds, 5 head rotating drill holder, 7' x 12' x 80'' tall overall

1006
Steel Table
37'' x 80'' x 32'' tall

1007
Shelf with Parts
40'' x 10' x 6' tall, grinding wheels, pipe fittings, electrical components

1008
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1009
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1010
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1011
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1012
60'' Circle Saw
missing some shanks & bits, 2'' eye

1013
56'' Circle Saw
2'' eye, broken shanks & bits need repaired

1014
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1015
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1016
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1017
56'' Circle Saw
F7 style, 2'' eye, broken

1018
56'' Circle Saw
2'' eye, no shanks or bits, broken

1018A
Assorted Saw Blades
(8)-20'' blades, 5 1/2'' arbor, (12)-22'' blades, 6 1/2'' arbor, (10)-24'' blades, 1 1/4'' arbor

1018B
Assorted Saw Blades
(5)-24'' blades, 1 1/4'' arbor, (7)-20'' blades, 4'' arbor, (9)-20'' blades, 6 7/8'' arbor

1018C
Pallet of 18" Blades
(2) boxes, (16) blades/box, 4 3/8" eye, 32 total appear to be new in box

1019
Pallet of Air & Hydraulic Cylinders

1020
Pallet of Hydraulic Hoses

1021
Pallet of Lights

1022
Pallet of Electrical Parts
breakers & switches, control stand

1023
Pallet of Electrical Parts
breakers, switches, fuses, & wire, Remington 16'' electric chain saw with no blade

1024
Pallet of Electrical Parts
switches & breakers

1025
Pallet of Electrical Parts
breakers, switches, fuses, conduit parts, also includes bolt organizers

1026
Pallet of Electric Motors & Lights
(2)-5 hp motors, (1)-3 hp motor, (2)-0.5 hp motors

1027
Conduit Pipe Bender & Pipe Vise

1028
Pallet of Bushings, Pulleys, & Sprockets

1029
Pallet of Chains
brand new 10' section of roller chain, bearing, bucket of bolts, 2 hp motor with gear box

1030
Pulley & Air Valve
32'' single groove pulley, 2 7/8'' eye on pulley

1031
Bolt Organizer Bins
(5) pieces at-12'' x36'' x 22'' tall

1032
Pallet of Electrical Boxes
starters, disconnects, & breakers

1033
Pallet of Parts
air cylinders, air valve, hydraulic pump, electrical parts & fuses, & conduit fittings

1034
Pallet of Parts
belt lacing, electrical parts, bearings, & pipe fittings

1035
Pallet of Parts
roller chain, gear chain, bearings, & sprockets

1036
Pipe Threader Pallet
pipe bender, tap & die kit, strapping tool, 8'' flat fish tape

1037
Pallet of Parts
pipe fittings, bushings, sprockets, washers & bolts, conduit parts

1038
Box of Bushings & Pipe Fittings

1039
Pallet of Chain Hoists
(2)-10 ton, (1)-3500 lb.

1040
Pallet of Electrical Parts
breakers, switches, & electrical boxes

1041
Pallet of Electrical Parts
motor starters & cut-offs

1042
Pallet of Electrical Parts
also includes air valves

1043
Conveyor Belts
(1)-24'', (1)-48'', lengths unknown for the others

1044
Pallet of Ladder Back Chains
12'' wide, lengths unknown

1045
30'' Tower Edger
(2)-14'' blades, 1 movable, includes 10 hp motor, 3' x 10' wooden frame, infeed rolls, frame needs redone

1046
6' Band Wheel
spoked, 10'' wide, includes steel coupling, fits Salem line bar resaw

1046A
Conveyor Belt
14'', length unknown

1046B
Frick Mandrel Shaft
2 3/16'' x 5', 30'' 8-groove pulley

1046C
Conduit
4' x 80'' lumber rack filled with assorted metal & PVC conduit

1046D
Lumber Rack with Conduit and Drain Tile
4' x 54" x 3' tall rack

1047
Steel Shelf
3' x 9' 6'' x 9' tall

1048
Steel Shelf
3' x 9' 6'' x 9' tall

1049
Steel Shelf
3' x 9' 6'' x 9' tall

1050
Bolt Bin Organizers
2 pieces-both 12 x 34 x 42'' tall, includes all fittings in organizers

1051
Wooden Shelf & Contents
9 x 93 x 50'' tall, includes all contents, conduit parts, electrical components, light bulbs, Also includes pallet of electrical wiring under shelf.

1052
Pallet of Nuts, Bolts, & Pipe Fittings

1053
Pallet of Nuts, Bolts, & Pipe Fittings

1054
Pallet of Bolts, Pipe Fittings, & Wire

1055
Pallet of Nuts, Bolts, & Nails

1056
Pallet of Bolts & Pipe Fittings

1057
Pallet of Nuts, Bolts, & Lags

1058
Pallet of Bolts, Pipe Fittings, & Electrical Parts

1059
Pallet of Bolts, Nuts, Pipe Fittings, & Electrical Parts

1060
Pallet of Electrical Boxes

1061
Diesel Transfer Tank
24" x 42" x 24"

1062
Pallet of Air and Hydraulic Cylinders

1063
Pallet of Shovels
Includes hoes and pickaxes and scrapers

1064
Pallet of Shovels
Squegee, scrapers, hoes, and pickaxes

1065
Pallet of Shovels
Scrapers, garden rake, hoes, pickaxes

1066
Conveyor Belts
(1) 24", (2) 7", lengths unknown

1067
Cleated Conveyor Belts
(1) 24", length unknown

1068
Conveyor Belts
(2) 6" lengths unknown

1069
Pallet of Hydraulic Motors

1070
Ingersoll Rand Portable Light Tower
SN: 421167ULUD92, Model: LS6CHZT4F, Meter reads: 8,100 hours, 2011 model, Kubota 1.1 Liter Diesel Engine, 12.6 KW, 175/80D13 tires, pintle hitch. 

100
HMC Rosserhead Debarker
(1st lot of an entirety) Model: V-216H, SN: 1173-79, 6' x 8' x 7' tall wooden cab with controls and electrical boxes, 30 hp electric motor on head, 3 x 24" bull wheels, 7' x 26', includes catwalk around debarker, infeed deck, and cab, 10 hp hydraulic pack, hydraulic cylinders on log kickers.

101
4-Strand Log Deck with Stop'N'Load
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

102
Hourglass Roll Case
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

103
Chain Waste Conveyor
(Part of entirety) Electric drive, 2 strands of 12" ladder back chain, 36" pan, 20" sides, 50" x 84' long, includes slide pan under debarker.

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
5-Strand Log Deck
15'6" x 42', electric drive, 4" chain, includes cat walk on side and support steel to ground.

106
5-Strand Log Deck
4" chain, 13'6" x 50', electric drive, 4' nose skid, 5 arm stop'n'load, includes support steel to ground.

107
6' Bar Type Log Turner
Hydraulic drive and cylinder.

108
Salem 3 Head Block Carriage
(1st lot of an entirety) 9' x 18', first to second head is 7', second to third is 4', Salem setworks, heads are filer and stole, 1 1/2" dogs, air dogs air over 110 setworks, 4 axel, includes pentagram, includes controls in cab.

109
Carriage Track and Frame
(Part of entirety) 75" on center, 60' long, include structural steel to ground, includes rub rail, includes pullies mount in track, does not include cable, hydraulic cylinder on tensioner.

110
Carriage Feed and Drive
(Part of entirety) 100 hp electric motor, 230 V, includes large gear box 11.424 to 1 gear box, 1" steel cable, includes steel frame, 16" fan blower with electric drive mounted to motor.

201
2006 Bobcat T190 Skid Steer
SN: 531614965
Meter reads: 2,492 hours
Engine: 4-cylinder Kubota
Fuel type: Diesel
ROPS: Open sided cab, no door
2 Speed: No
Highflow: No
Attachments: 6' bucket
A/C: No
Heater: No

Features and Notes: 16" tracks, hand and foot controls. Runs and operates great.
 

111
40 Hp Hydraulic Pack
(Part of entirety) 2' x 5' x 2' tank, PVR50 hydraulic pump, includes all valves, and hydraulic lines running to machine.

206
Volvo L70D Wheel Loader
SN: L70DV19193
Meter reads: 18,156 hours
Engine: Volvo Diesel - 126 hp - model: TD63KGE
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: yes
Center to center of pins: 20 1/2"
Lift capacity: 13,400 KG
Tire Size: 20.5-25 air tires
Attachments: Rockwell grapple forks 7 x 45" forks, 6' wide
Heater: yes
A/C: yes
Quick Attach: yes

Features and Notes: Freshly serviced, runs and operates good.

112
Slab Dump
(Part of entirety) 24" belt, air cylinder, electric drive, 22" x 15'.

207
Allis Chalmers 940 Wheel Loader
SN: 940-1438
Meter reads: 8,034 hours
Engine: Allis Chalmers - SN: 2900MK1
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
3rd Valve: no
Tire Size: 17.5-25 air tires
Attachments: 94" bucket, 4 x 60" forks, 64" wide, both pin through
Heater: yes
A/C: no
Quick Attach: no

Features and Notes: Freshly serviced and painted, runs and operates good. 

113
Operators Cab
(Part of entirety) 5' x 6' x 7', includes catwalk and steps around cab

214
2004 Prentice 384D CMS Knuckleboom
SN: D384PR60124
Meter reads: 15 hour, rolled over
Engine: Cummins
Fuel type: Diesel
Continuous Grapple: Yes, 56" max width
Trailer: 2004 Evans
Delimber: CSI delimber
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Fully enclosed cab with pilot joystick control, 11R22.5 tires. 

114
Carriage Entirety of Lots 108-113
With 10% raise.

214A
CSI DL 4400 Buck-Saw
SN: 4413042714, direct drive, 48" cutting bar, 6' x 18'8" log rack.

114A
Vertical Air Tank
40" diameter 9' 6" long.

215
Hawker Siddeley C6D Cable Skidder
SN: B601-004, Meter reads: 9014 hours, Detroit Diesel Engine (Model 50437000, SN: 4D0206214), manual transmission, 23.1 - 26 air tires, 8' blade, winch with 1/2" cable (SN: 7187), freshly serviced and painted, runs and operates good.

115
Salem 7' Head Rig
13" x 7' band wheels, spoked wheels, 1' mead on top wheel, 2' x 4' off bear belt, no belt, weight strain, lineal positioning cylinder.

216
2014 John Deere 748H Dual Arch Grapple Skidder with Winch
PIN: 10W748HXHDD656748, 1000 hours on 6.8L JD Reman Engine, 12,900 hours total on machine, 30.5-32 air tires, set up for dual tires, heavy duty Sweda Axles, 9'8" blade, 11' max grapple, winch with 1" cable, fully enclosed cab with Heat/AC, radio, and joystick controls, good running machine, everything works as it should.

115A
15 Hp Hydraulic Pack
18" x 34" x 20" tank includes all lines to machine.

217
2010 John Deere 648H Dual Arch Grapple Skidder with Winch
PIN: 1DW648HXKA0628101, 35.5-32 air tires, Sweda heavy duty axles, meter reads 12326 hours, fully enclosed cab with heat/AC, joystick controls, suspension seat, radio, John Deere 6.8L diesel engine, no cable on winch, 11' max grapple, 9'8" blade, good running machine.

115B
Hydraulic Pack
7 hp motor, 2 hp motor, 16" x 24" x 12" tank, includes lines to machine.

218
2006 John Deere 748G III Dual Arch Grapple Skidder
PIN: DW748GX605217, 30.5-32 tires, 11' max grapple, 9'8" blade, John Deere 8.1L diesel engine, rated at 140 KW, meter reads 9370 hours, fully enclosed cab with heat/Ac, radio, and joystick controls, good running machine, everything works as it should.

116
4 Strand Transfer Deck
H78 chain, 11'6 x 40', missing chain on one strand, no drive.

225
2017 Prime Tech PT-300 Stump Grinder
SN: 00471, machine wight is 32090 lb., meter reads 3719 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display, and radio, 26" steel tracks, LED lights front and back, diesel engine rated at 275 hp, FAE mulching head made in 2018 (model: 300/SC-PT300, SN: 18-0438), weighs 5016 lb., 36" cutting wheel with teeth, in great condition, everything works as it should.

117
Salem Line Bar Resaw
(1st lot of an entirety) SN: 129301, hydraulic power feed rolls, 10" x 6' spoked band wheel, 3/4" mead, 3' x 9' infeed rolls, hydraulic cylinder on cart pusher, electric drive not included.

226
2017 Prime Tech PT-300 Stump Grinder
SN: 00448, diesel engine rated at 275 hp, machine weight is 31224 lb., meter reads 4203 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display and radio, 26" steel tracks, LED lights front and back, FAE Mulcher head (Model: 300/SC-PT300, SN: 15-0578), weighs 4788 lb., made in 2015, 36" cutting disc with teeth. In great condition, everything works as it should.

118
Shurman Infeed Rolls
(Part of entirety) SN: 1397-A, 8 1/2" x 51" rolls, 24" to 30" spacing, 5' x 21', 5' x 15' 5 strand pop up transfer, air cylinder on transfer, no drive.

235
2012 John Deere 850K WLT Dozer
SN: 1T0859KXVCE230386
Meter reads: 8,390 hours
Engine: JD 6068
Fuel type: Diesel
Blade: 13'4", 6 way
ROPS: Fully enclosed cab
A/C: yes
Heater: yes

Features and Notes: Air ride seat, hand controls, push button start, radio, 24" tracks, Carco winch with 1 1/4" cable, Model: H85-218V, SN: 1201688, starts right up, runs and operates great.

119
5 Strand Transfer Deck
(Part of entirety) 12' x 12', H78A roof top chain, electric drive.

239
1986 John Deere 850B Dozer
SN: T0850BF724766
Meter reads: 299 hours, rolled over
Engine: JD 6466, SN: SE6466A305048
Fuel type: Diesel
Blade: 12'10", 6 way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: Carco 60 winch with 1" cable, SN: 6-1549, 24" tracks, has small hydraulic oil leak.

119A
Operators Cab
6' x 7' x 8' tall, includes controls for resaw entirety, includes catwalk steps.

240
1994 John Deere 650 G Dozer
SN: T0650GW797393
Meter reads: 7,500 original hours!
Engine: 4045T JD engine
Fuel type: Diesel
HP: 99 hp
Blade: 10' 6-way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: 18" trucks, power shift transmission, rebuilt 4000 series John Deere winch with 5/8" cable, runs and operates great, was not used for logging, originially used on farm. 

120
Electric Motor
(Part of entirety) 100 hp, 900 rpm, 445T frame.

241
1975 John Deere 550 Dozer
SN: 550C317129T
Meter reads: 7,153 hours
Engine: 4-cylinder John Deere
Fuel type: Diesel
HP: Approx. 60
Blade: 8' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, hand controls, JD 3325 winch with no cable, 16" tracks, motor runs good, has bad transmission, is extremely weak in reverse. 

121
30 Hp Hydraulic Pack
(Part of entirety) Includes cooling unit and hydraulic lines to machine, 2' x 4' x 3' tank.

242
1995 John Deere 650G Dozer
SN: 815966
Meter reads: No meter
Engine: John Deere 4045
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, JD winch (SN: TOWM123007096) with 5/8" cable, freshly painted and serviced. Runs strong and operates great.

122
Resaw Entirety of Lots 117-121
With 10% raise.

243
2005 John Deere 550J LT Dozer
SN: T0550JX116794
Meter reads: 90 hours, rolled over
Engine: JD Power Tech 4.5L
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, John Deere winch with 5/8" cable. Runs and operates great. 

123
Cox Roll Case
10" x 30" rolls, 36" spacing, 4' x 70', electric drive, 10 strand pop up transfer, 42" x 30'

245
2014 John Deere 210GLC Excavator
SN: 1FF210GXKDE521816
Meter reads: 8,854 hours
Engine: JD 6.8L, Model: 6068HT086, made in 2013
Fuel type: Diesel
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 123571-1-1-3) 6' max grapple, 3' cutting bar, 28" tracks, cab has radio, pilot controls, and electronic display, freshly serviced and painted, runs and operates great, no issues, has forestry package.

124
5 Strand Transfer Deck
H78 chain electric drive, air cylinders on pop up board stop 13' x 18'6".

246
2013 John Deere 245G LC Excavator
SN: 1FF245GXHCE600057
Meter reads: 6,918 hours
Engine: Isuzu 16 valve, Model: AM-4HKIX, 128 KW
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: INV-055173), 6' max grapple, 3' cutting bar, 28" tracks, fully enclosed cab with pilot controls and electronic display, rearview camera, forestry package, freshly serviced and painted, runs and operates great, no issues. 

125
Cook Edger
Model: 36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, control panel, manual blade set, (2) 20" blades both are adjustable, electric drive.

247
John Deere 225D LC Excavator
SN: 1FF225DXKBD501826
Meter reads: 8,133 hours
Engine: Isuzu 16 valve
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 106333-1-1-3), 6' max grapple, 3' cutting bar, 24" tracks, fully enclosed cab with pilot controls, radio electronic display, forestry package, freshly serviced and painted, runs and operates great

126
5 Strand Transfer Deck
H130 roof top chain, 15" x 40", includes catwalk on side, electric drive, slant loading deck.

248
2000 John Deere 200 LC Excavator
SN: FF0200X501501
Meter reads: 14,150 hours
Engine: JD 6.8L Power Tech
Fuel type: Diesel
Bucket: Eaco 40" with 5 teeth
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: 32" tracks, fully enclosed cab, freshly serviced and painted, starts and operates great.

127
4 Strand Unscrambler
33" slats on each strand, electric drive, 7' 6" x 18' 6" x 80" tall.

255
2002 International 4800 Truck, VIN # 1HTSEAAR82H409075
Mileage: 62,170 miles
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
GVWR: 35,000 lb
Transmission: 6 speed Eaton Fuller
Front axle rating: 14,000 lb.
Rear axle rating: 21,000 lb
AC/Heat: yes
VIN #: 1HTSEAAR82H409075

Features and Notes: 11R22.5 tires, 8' x 16' service bed with boxes, pintle hitch, overhead rack above cab, 4x4, has outriggers, winch with 1/2" cable on front of truck, HI Ranger 5FC-55 fiberglass boom, SN: 2010416814, 55' max reach, 700 lb bucket capacity, 12V power hydraulic controls, 2' x 4' x 42" deep bucket. 

128
Hemco 12 Head Drop Trim Saw
24" saws, electric drive, air cylinders, 17' x 26' overall, 16' 6" x 22" 10 strand transfer, deck feed with rolls, electric drive, includes electrical boxes, 2' x 24' waste conveyor with electric drive.

256
Peterbilt 249 Concrete Mixer Semi Truck
VIN: 1XP4MAOXXFN191512
Meter reads: 120, 478 miles
Engine: Cummins Diesel
Transmission: 8 speed Eaton Fuller
Heat/AC: no

Features and Notes: 11R22.5 tires, includes (3) 4' concrete chute sections, McNeilns 10 yard concrete mixer, SN: 7109, 450" drum volume, 10 yard mix capacity, 100 gallon water tank capacity.

129
8 Strand Transfer Deck
Electric drive, H78 chain with 2" pegs on 38" spacing, 14' x 24'

257
1998 Volvo ALC 63 Log Truck, VIN: 4VHSCBJC9WN518560
VIN: 4VHSCBJC9WN518560
Meter reads: 692,509 miles
Engine: N14 Cummins-525 hp
Transmission: 10 speed Eaton Fuller
Suspension: Hendricks
Heat/AC: Yes, has it equipped but AC doesn't work
Full lock in rears: Yes
Double frame: Yes

Features and Notes: Rockwell 46 rear end, 8' x 23' 6" log bed, 88" wide x 90" tall log bunks, 5.56 ratio on rear end, 11R24.5 tires on rear, 385R22.5 tires on front, tri-axle, good running truck.

130
6 Strand Transfer Deck
17' x 27' 6", electric drive, includes support steel to ground.

258
2003 Chevrolet Silverado 3500 Flatbed Truck, VIN # 1GCJK39133E273422
Mileage: 217,873 miles
Engine Type: 6.6 Durmax
Fuel Type: Diesel
Transmission: 6 speed manual
GVWR: 11,400
Heat/AC: Yes
VIN #: 1GCJK39133E273422

Features and Notes: 8' x 8' 6" flatbed with 12" sides, LT265/75R16 tires, 2" hich receiver, dually, a good running truck.

131
5 Strand Green Chain
14' x 82', electric drive, roller chain on outside strands

259
2003 Chevrolet 3500 Flatbed Truck
VIN: GBJK344X3E299683, 162119 miles, 6 speed manual transmission, 6.0L Vortec gas engine, dually 8' x 12' flatbed with 11" wooden sides, single cab, toolbox under bed, LT265/75R16 tires, (2) 2" hitch receivers, good running truck.

131A
Electrical Boxes
Includes all electrical panels on upper level of building as marked and pictured, does not include any conduit.

261
1997 Ford LTL 9000 Semi Truck
VIN: 1FTYA90U7VVA04578
Meter reads: 760,452 miles
Engine: Cummins N14, 475 hp
Transmission: 10 speed Eaton Fuller
GVWR: 50,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 22,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: No PTO, dual axle, Hendricks Spring suspension, 44 full lock rears, single frame, 11R24.5 tires all around. Good running truck.

132
Chain Waste Conveyor
14" ladder back chain with flights, 24" pan, 18" sides, electric drive, 45" x 148', includes catwalk steps and slide pans

260
2008 Chevrolet 2500 HD Flatbed Truck
VIN: 1GCHK23697F563872, GVWR: 9200 lb., 188171 miles, 6.0L Vortec gas engine, automatic transmission, crew cab, 7' x 8' aluminum flatbed with toolbox steel front bumper, LT265/75R16 tires. Good running truck.

133
Electric Motor Unit
250 hp general electric with 6335S frame, 180 kw 1180 rpm general electric, 3 kw 1800 rpm general electric, 5 kw 1200 rpm general electric, 42" x 10' x 50" overall size.

262
2005 Chevrolet Silverado Pickup Truck, VIN # 1GCHK23U75F905010
Mileage: 127,336 miles
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 9,200 lbs.
Transmission: Automatic
VIN #: 1GCHK23U75F905010

Features and Notes: will have new injectors by auction day, 4WD, new battery, 265/75R16 tires, crew cab, 8' bed, steel bumper on rear, 105 gallon diesel, transfer tank with 12V pump, includes toolbox on bed.

134
Belt Conveyor
21" belt, 30" pan, 14" sides, 42" x 62' electric drive.

263
2000 Chevrolet Silverado Pickup Truck, VIN # 1GCGK29U8YZ218916
Mileage: 124,037
Drive Line: 4WD
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 8,600 lbs
Transmission: Automatic
VIN #: 1GCGK29U8YZ218916

Features and Notes:265/75R16 tires, crew cab, 8' bed, 105 gallon diesel transfer tank with 12V pump, includes 3 toolboxes mounted in bed, 2" hitch receiver, New rocker panels will be installed before auction. 

135
Precision Chip Sorter
80" x 8', electric drive.

271
2003 Talbert Lo-Boy Trailer
VIN: 40FS0442831022254, Model: TDW-34SA-HRG-1-T1, GVWR: 84,120 lb., 255/70 R22.5 tires, 35 ton capacity, hydraulic cylinders for detach, 102" x 18'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, freshly sand blasted and painted.

136
Double Paddle Chain Conveyor
Electric drive 32" x 8', includes slide pan, 2' pan, 26" sides, H78 chain 2" x 11" paddles

272
1996 Fontaine Lo-Boy Trailer
Hydraulic cylinders for detach, 102" x 21'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, 35 ton capacity. Freshly sandblasted and painted.

137
Syncro Shear Vibrating Conveyor
SN: C2521-1, electric drive, 20" pan, 14" sides, 28" x 47', includes fiberglass section and chipper infeed.

273
1997 Pitts Log Trailer
VIN: 1PELT4228VP970694, 92" wide x 82" tall log bunks, 40' long, 11R24.5 tires, air brakes, freshly sandblasted and painted.

138
MDI Vibrating Conveyor Metal Detector
Includes electric box.

274
Pitts Log Trailer
VIN: 1PELT4221TP960992, 92" wide x 90" tall log bunks, 43' long, 11R24.5 tires. Freshly sandblasted and painted.

139
Fulghum 60" 8 Knife Chipper
SN: FIFIL1279, Model: 60 81, 700 rpm, electric drive not included, bottom outfeed, includes surrounding catwalk.

275
CAT 3304 Portable Genset
Engine Model: 3304D1, SN: 83703138, 466 original hours! Engine rated at 165 hp, has always been stored indoors, Generator Model: SR-4, SN: 9AB00958, mounted on 7' x 13' 6" long trailer with pintle hitch, 205/75R14 tires, in great condition, starts right up and runs strong, master battery, disconnect switch. 

140
Toshiba Electric Motor
250 hp, 460 V, 505 UZ frame, 1180 rpm.

276
1997 Eagle Transcraft Flatbed Trailer
VIN: 1TTF4820XV1052659
Model: Eagle W2-48X98
GVWR: 80,000 lb.
8' x 48', 285/75R24.5 tires, includes straps, frame will be freshly sandblasted and painted by auction. 

141
Chain Conveyor
15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, includes catwalk.

291
2008 JLG Man-Lift
SN: 0300027659, Model: 600A, LP and gas powered, 2 wheel drive, 500 lb. basket capacity, 60' reach, does not have generator, 3' x 6' x 43" deep basket with controls, 14-17.5 pneumatic tires.

142
Rader Chip Auger
Electric drive, includes support steel to ground, 5' x 18 x 5' tall box.

325
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

143
Black Clawson Shaker Screen
SN: 3892-74, Model: 612, 78" x 18', electric drive, 11' tall.

326
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

144
Chain Conveyor
12" ladder back chain, 18" pan, 12" sides, 30" x 20' electric drive.

145
36" Blower
Electric drive, 14" x 16" top feed 13" outlet, 12' of dust pipe, 70 hp motor.

146
Paddle Chain Conveyor
H78 chain, 2" x 12" paddles, 14" pan, 9" sides, electric drive, 20" x 38'.

147
Paddle Chain Conveyor
24" pan, 16" sides, H78 chain, 2" x 12" paddles, 3' x 69' electric drive.

148
Chain Conveyor
12" ladder back chain, electric drive, 14" pan, 10" sides, 30" x 70'.

149
Paddle Chain Conveyor
3" x 13" paddles, 16" pan, 15" sides, includes slide pan and catwalk, electric drive, 20" x 108' long, includes support steel to ground.

150
Armstrong #6 RH Band Saw Sharpener
SN: 16154, electric drive, includes extra grinding wheels and all clamps and strands, Armstrong #58-B filing clamp, includes (1) 10" band on clamps.

151
Armstrong Band Sharpener
Electric drive, no clamps, includes moisture control cabinet.

152
Circle Saw Sharpener
8" grinding disc, 110 V plug in.

153
Hanchett Knife Grinder
Size-60-MG, Shop #20, electric drive, 8'4" bed, grinding wheel is chipped.

154
Thompson-Lane Saw Guide Milling Machine
SN: 776, Model: B, electric drive, mounted on top of 17" x 27" x 32" tall.

155
New Man G-132 Knife Grinder
SN: 12528, electric drive, 32" long knife capacity.

156
Shop Press
30" x 66" tall, no hydraulic jack included, rated for 30 tons.

157
Engine Hoist
Needs cylinder.

158
Cabinet with Parts
22" x 29" x 77" tall, grinding wheels, Strapping tool.

159
Hammering Block
14" x 60" x 5.5" block, includes (2) 30" x 45" x 45" steel stands, also includes 54" hydraulic cylinder.

160
Band Saw Blades
14 bands total, 9"-12" wide, fits 7' head rig, some sharpened.

175
Nicholson Ring Debarker
50" max log diameter, air cylinder on push down roll, 6' x 11'6" infeed log trough with 26" Anson chain, 30 hp hydraulic pack wit 24" x 54" x 24" tank, 3' x 6' x 2' hydraulic extra tank, includes Falk gearbox, shafts and sprockets, no drive included, dismantled and ready for loading.

176
Williams Patent Crusher and Pulverize Hammer Mill
SN: 19540, 30" x 32" top feed, 24 x 32" hammer head, bottom discharge, includes 3 extra screens, 6' x 11' x 4' tall with steel frame.

176A
Rechart 48" Chain Type Log Turner
Hydraulic drive and cylinder, brand new teeth and chain.

177
5 Strand Transfer Deck
No chain or drive, cut into sections, main deck is 14' 6" x 30' total, 5 strand 5' pop up transfer wit roller chain, includes shafts and sprockets.

178
Horizontal Air Tank
4' diameter, 12' long.

179
Horizontal Air Tank
40" diameter 9' 6" long.

180
Horizontal Air Tank
30" diameter 6' long

181
Vertical Air Tank
24" diameter 6' tall

181A
Catwalk Steps
38" x 9' 6" x 78" tall.

181B
Shop Press
Hydraulic cylinder and electric motor, 50" x 5' x 115" tall.

181C
Tyrone Berry Carriage Drive
Young cooling unit, 36" x 53" x 15" main tank, 30" x 36" x 18" auxiliary tank, no electric drive, has all pumps and gauges, condition is unknown.

181D
Skate Rolls
3 sections. (1) 20" x 9'8", 3 x 16" rolls, 18" spacing, (1) 20" x 10', 3 x 16" rolls, 18" spacing, (1) 21" x 6', 3 x 16" rolls, 18" spacing.

182
Roll Case
10 1/2" x 30" rolls, 36" spacing, includes gearbox but no motor, 4' x 31' 6" with frame.

181E
2 Strand Transfer Deck
32" x 16'6", no chain or drive, fits up to 4" wide chain.

183
Spiral Roll Case
8 1/2 x 42" rolls, 30" spacing, includes gearbox but no motor, 54" x 27'6".

184
Cox Roll Case
10 1/2" x 30" rolls, 36" spacing, 45" x 38' 6", includes gearbox but not motor.

185
Filer and Stowell Gang Edger
SN: E546305, (3) 20" blades, 2 moveable 5 x 64" infeed capacity, no drive included, 5' x 11' infeed rolls, manual blade set, 54" x 22' 6" split Roll Case outfeed with electric drive, air cylinders on board pushers, good feed rolls

186
Belt Conveyor Frame
No drive, belt, or chain. 28" pan, 19" sides, (4) 20" sections, 80' total.

187
Fulghum Vibrating Conveyor
Includes drive, no motor, 18" pan, 9" sides, 33" x 14'.

188
Webster Vibrating Conveyor
No drive, 24" pan, 6" sides, 33" x 10'.

189
Vibrating Conveyor Fiberglass Sections
(1) 18" pan, 9" sides, 33" x 5' long with 3' metal section, (1) 22" pan, 8" sides, 28" x 5' long, (1) 15" pan, 15" sides, 28" x 5' long.

190
Ederer 10 Ton Overhead Crane
SN: D-6544, 21' long.

191
Overhead Crane System
30' long, includes winch system with electric motor and 3/8" steel cable.

192
Steel Rack and Sawhorses
Rack is 5' x 7' x 8' tall, sawhorses are 2' x 26" tall, 42" wide at base

193
Corley Operator's Cab
4' x 54" x 105" tall, includes control panel and hydraulic levers.

194
Cummins 300 Power Unit with Hydraulic Unit
Big Cam, 12" x 43" x 19" hydraulic tank, hydraulic pump system, has been sitting for 3 years, ran good when last used. 

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Cogar Lumber & Cogar Enterprises Ring #1
 Live Auction
 
Sale Date(s)
Friday Jun 9, 2023 Completed
Sale Location

Calvin, WV 26660
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!


 

00
Information Lot
Type of Auction (assets being sold): Late model Forestry & Land Clearing equipment. Also liquidating the sawmill that’s onsite.
This will be surplus asset auction for the Cogar Brothers. QUALITY CONSIGNMENTS WANTED!!!
HIGHLIGHT PIECES: 5 dozers, 6 excavators, 4 late model John Deere skidders, 3 late model stump grinders, trucks trailers and much more.

01
Preview Information
Week of the auction from 8 AM to 4 PM. Contact Jonathon to make an appointment 574-821-7530

02
Loadout Information

03
Payment Information
. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

90
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

99
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1000
Wells Metal Cutting Band Saw
Model 8-M-43, SN 5710, 18'' width capacity, electric drive

1001
Welding Cart
includes empty tank of compressed gas, N.O.S., 26'' x 36'' x 33'' cart, mounted on casters

1002
Air Compressor
10 hp electric motor, 22'' x 68'' horizontal tank

1003
Drill Press & Steel Bench
no drive, 8'' x 29'' bed on press, 37'' x 7' x 32'' tall table

1004
Steel Table
Includes (2) 12" x 34" x 42" tall bolt organizers

1005
Warner & Swasey 2A Machinist Lathe
SN 607369-2431333, Model M-510, electric drive, includes all parts, steel & drills in bed under lathe, 3 jaw chuck, 6' beds, 5 head rotating drill holder, 7' x 12' x 80'' tall overall

1006
Steel Table
37'' x 80'' x 32'' tall

1007
Shelf with Parts
40'' x 10' x 6' tall, grinding wheels, pipe fittings, electrical components

1008
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1009
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1010
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1011
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1012
60'' Circle Saw
missing some shanks & bits, 2'' eye

1013
56'' Circle Saw
2'' eye, broken shanks & bits need repaired

1014
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1015
56'' Circle Saw
no shanks or bits, 2'' eye, broken

1016
56'' Circle Saw
2'' eye, F7 style, needs sharpening

1017
56'' Circle Saw
F7 style, 2'' eye, broken

1018
56'' Circle Saw
2'' eye, no shanks or bits, broken

1018A
Assorted Saw Blades
(8)-20'' blades, 5 1/2'' arbor, (12)-22'' blades, 6 1/2'' arbor, (10)-24'' blades, 1 1/4'' arbor

1018B
Assorted Saw Blades
(5)-24'' blades, 1 1/4'' arbor, (7)-20'' blades, 4'' arbor, (9)-20'' blades, 6 7/8'' arbor

1018C
Pallet of 18" Blades
(2) boxes, (16) blades/box, 4 3/8" eye, 32 total appear to be new in box

1019
Pallet of Air & Hydraulic Cylinders

1020
Pallet of Hydraulic Hoses

1021
Pallet of Lights

1022
Pallet of Electrical Parts
breakers & switches, control stand

1023
Pallet of Electrical Parts
breakers, switches, fuses, & wire, Remington 16'' electric chain saw with no blade

1024
Pallet of Electrical Parts
switches & breakers

1025
Pallet of Electrical Parts
breakers, switches, fuses, conduit parts, also includes bolt organizers

1026
Pallet of Electric Motors & Lights
(2)-5 hp motors, (1)-3 hp motor, (2)-0.5 hp motors

1027
Conduit Pipe Bender & Pipe Vise

1028
Pallet of Bushings, Pulleys, & Sprockets

1029
Pallet of Chains
brand new 10' section of roller chain, bearing, bucket of bolts, 2 hp motor with gear box

1030
Pulley & Air Valve
32'' single groove pulley, 2 7/8'' eye on pulley

1031
Bolt Organizer Bins
(5) pieces at-12'' x36'' x 22'' tall

1032
Pallet of Electrical Boxes
starters, disconnects, & breakers

1033
Pallet of Parts
air cylinders, air valve, hydraulic pump, electrical parts & fuses, & conduit fittings

1034
Pallet of Parts
belt lacing, electrical parts, bearings, & pipe fittings

1035
Pallet of Parts
roller chain, gear chain, bearings, & sprockets

1036
Pipe Threader Pallet
pipe bender, tap & die kit, strapping tool, 8'' flat fish tape

1037
Pallet of Parts
pipe fittings, bushings, sprockets, washers & bolts, conduit parts

1038
Box of Bushings & Pipe Fittings

1039
Pallet of Chain Hoists
(2)-10 ton, (1)-3500 lb.

1040
Pallet of Electrical Parts
breakers, switches, & electrical boxes

1041
Pallet of Electrical Parts
motor starters & cut-offs

1042
Pallet of Electrical Parts
also includes air valves

1043
Conveyor Belts
(1)-24'', (1)-48'', lengths unknown for the others

1044
Pallet of Ladder Back Chains
12'' wide, lengths unknown

1045
30'' Tower Edger
(2)-14'' blades, 1 movable, includes 10 hp motor, 3' x 10' wooden frame, infeed rolls, frame needs redone

1046
6' Band Wheel
spoked, 10'' wide, includes steel coupling, fits Salem line bar resaw

1046A
Conveyor Belt
14'', length unknown

1046B
Frick Mandrel Shaft
2 3/16'' x 5', 30'' 8-groove pulley

1046C
Conduit
4' x 80'' lumber rack filled with assorted metal & PVC conduit

1046D
Lumber Rack with Conduit and Drain Tile
4' x 54" x 3' tall rack

1047
Steel Shelf
3' x 9' 6'' x 9' tall

1048
Steel Shelf
3' x 9' 6'' x 9' tall

1049
Steel Shelf
3' x 9' 6'' x 9' tall

1050
Bolt Bin Organizers
2 pieces-both 12 x 34 x 42'' tall, includes all fittings in organizers

1051
Wooden Shelf & Contents
9 x 93 x 50'' tall, includes all contents, conduit parts, electrical components, light bulbs, Also includes pallet of electrical wiring under shelf.

1052
Pallet of Nuts, Bolts, & Pipe Fittings

1053
Pallet of Nuts, Bolts, & Pipe Fittings

1054
Pallet of Bolts, Pipe Fittings, & Wire

1055
Pallet of Nuts, Bolts, & Nails

1056
Pallet of Bolts & Pipe Fittings

1057
Pallet of Nuts, Bolts, & Lags

1058
Pallet of Bolts, Pipe Fittings, & Electrical Parts

1059
Pallet of Bolts, Nuts, Pipe Fittings, & Electrical Parts

1060
Pallet of Electrical Boxes

1061
Diesel Transfer Tank
24" x 42" x 24"

1062
Pallet of Air and Hydraulic Cylinders

1063
Pallet of Shovels
Includes hoes and pickaxes and scrapers

1064
Pallet of Shovels
Squegee, scrapers, hoes, and pickaxes

1065
Pallet of Shovels
Scrapers, garden rake, hoes, pickaxes

1066
Conveyor Belts
(1) 24", (2) 7", lengths unknown

1067
Cleated Conveyor Belts
(1) 24", length unknown

1068
Conveyor Belts
(2) 6" lengths unknown

1069
Pallet of Hydraulic Motors

1070
Ingersoll Rand Portable Light Tower
SN: 421167ULUD92, Model: LS6CHZT4F, Meter reads: 8,100 hours, 2011 model, Kubota 1.1 Liter Diesel Engine, 12.6 KW, 175/80D13 tires, pintle hitch. 

100
HMC Rosserhead Debarker
(1st lot of an entirety) Model: V-216H, SN: 1173-79, 6' x 8' x 7' tall wooden cab with controls and electrical boxes, 30 hp electric motor on head, 3 x 24" bull wheels, 7' x 26', includes catwalk around debarker, infeed deck, and cab, 10 hp hydraulic pack, hydraulic cylinders on log kickers.

101
4-Strand Log Deck with Stop'N'Load
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

102
Hourglass Roll Case
(Part of entirety) Electric drive, 6 arm loading arm with air cylinder, 14' x 28', includes support steel to ground, 6" chain, heavy duty.

103
Chain Waste Conveyor
(Part of entirety) Electric drive, 2 strands of 12" ladder back chain, 36" pan, 20" sides, 50" x 84' long, includes slide pan under debarker.

104
Debarker Entirety of Lots 100-103
With 10% raise.

105
5-Strand Log Deck
15'6" x 42', electric drive, 4" chain, includes cat walk on side and support steel to ground.

106
5-Strand Log Deck
4" chain, 13'6" x 50', electric drive, 4' nose skid, 5 arm stop'n'load, includes support steel to ground.

107
6' Bar Type Log Turner
Hydraulic drive and cylinder.

108
Salem 3 Head Block Carriage
(1st lot of an entirety) 9' x 18', first to second head is 7', second to third is 4', Salem setworks, heads are filer and stole, 1 1/2" dogs, air dogs air over 110 setworks, 4 axel, includes pentagram, includes controls in cab.

109
Carriage Track and Frame
(Part of entirety) 75" on center, 60' long, include structural steel to ground, includes rub rail, includes pullies mount in track, does not include cable, hydraulic cylinder on tensioner.

110
Carriage Feed and Drive
(Part of entirety) 100 hp electric motor, 230 V, includes large gear box 11.424 to 1 gear box, 1" steel cable, includes steel frame, 16" fan blower with electric drive mounted to motor.

201
2006 Bobcat T190 Skid Steer
SN: 531614965
Meter reads: 2,492 hours
Engine: 4-cylinder Kubota
Fuel type: Diesel
ROPS: Open sided cab, no door
2 Speed: No
Highflow: No
Attachments: 6' bucket
A/C: No
Heater: No

Features and Notes: 16" tracks, hand and foot controls. Runs and operates great.
 

111
40 Hp Hydraulic Pack
(Part of entirety) 2' x 5' x 2' tank, PVR50 hydraulic pump, includes all valves, and hydraulic lines running to machine.

206
Volvo L70D Wheel Loader
SN: L70DV19193
Meter reads: 18,156 hours
Engine: Volvo Diesel - 126 hp - model: TD63KGE
Fuel type: Diesel
ROPS: Fully enclosed cab
3rd Valve: yes
Center to center of pins: 20 1/2"
Lift capacity: 13,400 KG
Tire Size: 20.5-25 air tires
Attachments: Rockwell grapple forks 7 x 45" forks, 6' wide
Heater: yes
A/C: yes
Quick Attach: yes

Features and Notes: Freshly serviced, runs and operates good.

112
Slab Dump
(Part of entirety) 24" belt, air cylinder, electric drive, 22" x 15'.

207
Allis Chalmers 940 Wheel Loader
SN: 940-1438
Meter reads: 8,034 hours
Engine: Allis Chalmers - SN: 2900MK1
Fuel type: Diesel
ROPS: Fully enclosed cab, needs new door
3rd Valve: no
Tire Size: 17.5-25 air tires
Attachments: 94" bucket, 4 x 60" forks, 64" wide, both pin through
Heater: yes
A/C: no
Quick Attach: no

Features and Notes: Freshly serviced and painted, runs and operates good. 

113
Operators Cab
(Part of entirety) 5' x 6' x 7', includes catwalk and steps around cab

214
2004 Prentice 384D CMS Knuckleboom
SN: D384PR60124
Meter reads: 15 hour, rolled over
Engine: Cummins
Fuel type: Diesel
Continuous Grapple: Yes, 56" max width
Trailer: 2004 Evans
Delimber: CSI delimber
Bucksaw Hookups: Yes
A/C: Yes
Heater: Yes

Features and Notes: Fully enclosed cab with pilot joystick control, 11R22.5 tires. 

114
Carriage Entirety of Lots 108-113
With 10% raise.

214A
CSI DL 4400 Buck-Saw
SN: 4413042714, direct drive, 48" cutting bar, 6' x 18'8" log rack.

114A
Vertical Air Tank
40" diameter 9' 6" long.

215
Hawker Siddeley C6D Cable Skidder
SN: B601-004, Meter reads: 9014 hours, Detroit Diesel Engine (Model 50437000, SN: 4D0206214), manual transmission, 23.1 - 26 air tires, 8' blade, winch with 1/2" cable (SN: 7187), freshly serviced and painted, runs and operates good.

115
Salem 7' Head Rig
13" x 7' band wheels, spoked wheels, 1' mead on top wheel, 2' x 4' off bear belt, no belt, weight strain, lineal positioning cylinder.

216
2014 John Deere 748H Dual Arch Grapple Skidder with Winch
PIN: 10W748HXHDD656748, 1000 hours on 6.8L JD Reman Engine, 12,900 hours total on machine, 30.5-32 air tires, set up for dual tires, heavy duty Sweda Axles, 9'8" blade, 11' max grapple, winch with 1" cable, fully enclosed cab with Heat/AC, radio, and joystick controls, good running machine, everything works as it should.

115A
15 Hp Hydraulic Pack
18" x 34" x 20" tank includes all lines to machine.

217
2010 John Deere 648H Dual Arch Grapple Skidder with Winch
PIN: 1DW648HXKA0628101, 35.5-32 air tires, Sweda heavy duty axles, meter reads 12326 hours, fully enclosed cab with heat/AC, joystick controls, suspension seat, radio, John Deere 6.8L diesel engine, no cable on winch, 11' max grapple, 9'8" blade, good running machine.

115B
Hydraulic Pack
7 hp motor, 2 hp motor, 16" x 24" x 12" tank, includes lines to machine.

218
2006 John Deere 748G III Dual Arch Grapple Skidder
PIN: DW748GX605217, 30.5-32 tires, 11' max grapple, 9'8" blade, John Deere 8.1L diesel engine, rated at 140 KW, meter reads 9370 hours, fully enclosed cab with heat/Ac, radio, and joystick controls, good running machine, everything works as it should.

116
4 Strand Transfer Deck
H78 chain, 11'6 x 40', missing chain on one strand, no drive.

225
2017 Prime Tech PT-300 Stump Grinder
SN: 00471, machine wight is 32090 lb., meter reads 3719 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display, and radio, 26" steel tracks, LED lights front and back, diesel engine rated at 275 hp, FAE mulching head made in 2018 (model: 300/SC-PT300, SN: 18-0438), weighs 5016 lb., 36" cutting wheel with teeth, in great condition, everything works as it should.

117
Salem Line Bar Resaw
(1st lot of an entirety) SN: 129301, hydraulic power feed rolls, 10" x 6' spoked band wheel, 3/4" mead, 3' x 9' infeed rolls, hydraulic cylinder on cart pusher, electric drive not included.

226
2017 Prime Tech PT-300 Stump Grinder
SN: 00448, diesel engine rated at 275 hp, machine weight is 31224 lb., meter reads 4203 hours, 6.8L Power Tech John Deere Engine, fully enclosed cab with heat/AC, pilot controls, rearview camera, electronic display and radio, 26" steel tracks, LED lights front and back, FAE Mulcher head (Model: 300/SC-PT300, SN: 15-0578), weighs 4788 lb., made in 2015, 36" cutting disc with teeth. In great condition, everything works as it should.

118
Shurman Infeed Rolls
(Part of entirety) SN: 1397-A, 8 1/2" x 51" rolls, 24" to 30" spacing, 5' x 21', 5' x 15' 5 strand pop up transfer, air cylinder on transfer, no drive.

235
2012 John Deere 850K WLT Dozer
SN: 1T0859KXVCE230386
Meter reads: 8,390 hours
Engine: JD 6068
Fuel type: Diesel
Blade: 13'4", 6 way
ROPS: Fully enclosed cab
A/C: yes
Heater: yes

Features and Notes: Air ride seat, hand controls, push button start, radio, 24" tracks, Carco winch with 1 1/4" cable, Model: H85-218V, SN: 1201688, starts right up, runs and operates great.

119
5 Strand Transfer Deck
(Part of entirety) 12' x 12', H78A roof top chain, electric drive.

239
1986 John Deere 850B Dozer
SN: T0850BF724766
Meter reads: 299 hours, rolled over
Engine: JD 6466, SN: SE6466A305048
Fuel type: Diesel
Blade: 12'10", 6 way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: Carco 60 winch with 1" cable, SN: 6-1549, 24" tracks, has small hydraulic oil leak.

119A
Operators Cab
6' x 7' x 8' tall, includes controls for resaw entirety, includes catwalk steps.

240
1994 John Deere 650 G Dozer
SN: T0650GW797393
Meter reads: 7,500 original hours!
Engine: 4045T JD engine
Fuel type: Diesel
HP: 99 hp
Blade: 10' 6-way
ROPS: Open cab
A/C: no
Heater: no

Features and Notes: 18" trucks, power shift transmission, rebuilt 4000 series John Deere winch with 5/8" cable, runs and operates great, was not used for logging, originially used on farm. 

120
Electric Motor
(Part of entirety) 100 hp, 900 rpm, 445T frame.

241
1975 John Deere 550 Dozer
SN: 550C317129T
Meter reads: 7,153 hours
Engine: 4-cylinder John Deere
Fuel type: Diesel
HP: Approx. 60
Blade: 8' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, hand controls, JD 3325 winch with no cable, 16" tracks, motor runs good, has bad transmission, is extremely weak in reverse. 

121
30 Hp Hydraulic Pack
(Part of entirety) Includes cooling unit and hydraulic lines to machine, 2' x 4' x 3' tank.

242
1995 John Deere 650G Dozer
SN: 815966
Meter reads: No meter
Engine: John Deere 4045
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, JD winch (SN: TOWM123007096) with 5/8" cable, freshly painted and serviced. Runs strong and operates great.

122
Resaw Entirety of Lots 117-121
With 10% raise.

243
2005 John Deere 550J LT Dozer
SN: T0550JX116794
Meter reads: 90 hours, rolled over
Engine: JD Power Tech 4.5L
Fuel type: Diesel
Blade: 9' 6-way
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: 18" tracks, John Deere winch with 5/8" cable. Runs and operates great. 

123
Cox Roll Case
10" x 30" rolls, 36" spacing, 4' x 70', electric drive, 10 strand pop up transfer, 42" x 30'

245
2014 John Deere 210GLC Excavator
SN: 1FF210GXKDE521816
Meter reads: 8,854 hours
Engine: JD 6.8L, Model: 6068HT086, made in 2013
Fuel type: Diesel
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 123571-1-1-3) 6' max grapple, 3' cutting bar, 28" tracks, cab has radio, pilot controls, and electronic display, freshly serviced and painted, runs and operates great, no issues, has forestry package.

124
5 Strand Transfer Deck
H78 chain electric drive, air cylinders on pop up board stop 13' x 18'6".

246
2013 John Deere 245G LC Excavator
SN: 1FF245GXHCE600057
Meter reads: 6,918 hours
Engine: Isuzu 16 valve, Model: AM-4HKIX, 128 KW
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: INV-055173), 6' max grapple, 3' cutting bar, 28" tracks, fully enclosed cab with pilot controls and electronic display, rearview camera, forestry package, freshly serviced and painted, runs and operates great, no issues. 

125
Cook Edger
Model: 36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, control panel, manual blade set, (2) 20" blades both are adjustable, electric drive.

247
John Deere 225D LC Excavator
SN: 1FF225DXKBD501826
Meter reads: 8,133 hours
Engine: Isuzu 16 valve
Fuel type: Diesel
Heater: yes
A/C: yes

Features and Notes: Has Rotobec RGP-900 360° grapple saw (SN: 106333-1-1-3), 6' max grapple, 3' cutting bar, 24" tracks, fully enclosed cab with pilot controls, radio electronic display, forestry package, freshly serviced and painted, runs and operates great

126
5 Strand Transfer Deck
H130 roof top chain, 15" x 40", includes catwalk on side, electric drive, slant loading deck.

248
2000 John Deere 200 LC Excavator
SN: FF0200X501501
Meter reads: 14,150 hours
Engine: JD 6.8L Power Tech
Fuel type: Diesel
Bucket: Eaco 40" with 5 teeth
Hydraulic thumb: no
Heater: yes
A/C: yes

Features and Notes: 32" tracks, fully enclosed cab, freshly serviced and painted, starts and operates great.

127
4 Strand Unscrambler
33" slats on each strand, electric drive, 7' 6" x 18' 6" x 80" tall.

255
2002 International 4800 Truck, VIN # 1HTSEAAR82H409075
Mileage: 62,170 miles
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
GVWR: 35,000 lb
Transmission: 6 speed Eaton Fuller
Front axle rating: 14,000 lb.
Rear axle rating: 21,000 lb
AC/Heat: yes
VIN #: 1HTSEAAR82H409075

Features and Notes: 11R22.5 tires, 8' x 16' service bed with boxes, pintle hitch, overhead rack above cab, 4x4, has outriggers, winch with 1/2" cable on front of truck, HI Ranger 5FC-55 fiberglass boom, SN: 2010416814, 55' max reach, 700 lb bucket capacity, 12V power hydraulic controls, 2' x 4' x 42" deep bucket. 

128
Hemco 12 Head Drop Trim Saw
24" saws, electric drive, air cylinders, 17' x 26' overall, 16' 6" x 22" 10 strand transfer, deck feed with rolls, electric drive, includes electrical boxes, 2' x 24' waste conveyor with electric drive.

256
Peterbilt 249 Concrete Mixer Semi Truck
VIN: 1XP4MAOXXFN191512
Meter reads: 120, 478 miles
Engine: Cummins Diesel
Transmission: 8 speed Eaton Fuller
Heat/AC: no

Features and Notes: 11R22.5 tires, includes (3) 4' concrete chute sections, McNeilns 10 yard concrete mixer, SN: 7109, 450" drum volume, 10 yard mix capacity, 100 gallon water tank capacity.

129
8 Strand Transfer Deck
Electric drive, H78 chain with 2" pegs on 38" spacing, 14' x 24'

257
1998 Volvo ALC 63 Log Truck, VIN: 4VHSCBJC9WN518560
VIN: 4VHSCBJC9WN518560
Meter reads: 692,509 miles
Engine: N14 Cummins-525 hp
Transmission: 10 speed Eaton Fuller
Suspension: Hendricks
Heat/AC: Yes, has it equipped but AC doesn't work
Full lock in rears: Yes
Double frame: Yes

Features and Notes: Rockwell 46 rear end, 8' x 23' 6" log bed, 88" wide x 90" tall log bunks, 5.56 ratio on rear end, 11R24.5 tires on rear, 385R22.5 tires on front, tri-axle, good running truck.

130
6 Strand Transfer Deck
17' x 27' 6", electric drive, includes support steel to ground.

258
2003 Chevrolet Silverado 3500 Flatbed Truck, VIN # 1GCJK39133E273422
Mileage: 217,873 miles
Engine Type: 6.6 Durmax
Fuel Type: Diesel
Transmission: 6 speed manual
GVWR: 11,400
Heat/AC: Yes
VIN #: 1GCJK39133E273422

Features and Notes: 8' x 8' 6" flatbed with 12" sides, LT265/75R16 tires, 2" hich receiver, dually, a good running truck.

131
5 Strand Green Chain
14' x 82', electric drive, roller chain on outside strands

259
2003 Chevrolet 3500 Flatbed Truck
VIN: GBJK344X3E299683, 162119 miles, 6 speed manual transmission, 6.0L Vortec gas engine, dually 8' x 12' flatbed with 11" wooden sides, single cab, toolbox under bed, LT265/75R16 tires, (2) 2" hitch receivers, good running truck.

131A
Electrical Boxes
Includes all electrical panels on upper level of building as marked and pictured, does not include any conduit.

261
1997 Ford LTL 9000 Semi Truck
VIN: 1FTYA90U7VVA04578
Meter reads: 760,452 miles
Engine: Cummins N14, 475 hp
Transmission: 10 speed Eaton Fuller
GVWR: 50,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 22,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: No PTO, dual axle, Hendricks Spring suspension, 44 full lock rears, single frame, 11R24.5 tires all around. Good running truck.

132
Chain Waste Conveyor
14" ladder back chain with flights, 24" pan, 18" sides, electric drive, 45" x 148', includes catwalk steps and slide pans

260
2008 Chevrolet 2500 HD Flatbed Truck
VIN: 1GCHK23697F563872, GVWR: 9200 lb., 188171 miles, 6.0L Vortec gas engine, automatic transmission, crew cab, 7' x 8' aluminum flatbed with toolbox steel front bumper, LT265/75R16 tires. Good running truck.

133
Electric Motor Unit
250 hp general electric with 6335S frame, 180 kw 1180 rpm general electric, 3 kw 1800 rpm general electric, 5 kw 1200 rpm general electric, 42" x 10' x 50" overall size.

262
2005 Chevrolet Silverado Pickup Truck, VIN # 1GCHK23U75F905010
Mileage: 127,336 miles
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 9,200 lbs.
Transmission: Automatic
VIN #: 1GCHK23U75F905010

Features and Notes: will have new injectors by auction day, 4WD, new battery, 265/75R16 tires, crew cab, 8' bed, steel bumper on rear, 105 gallon diesel, transfer tank with 12V pump, includes toolbox on bed.

134
Belt Conveyor
21" belt, 30" pan, 14" sides, 42" x 62' electric drive.

263
2000 Chevrolet Silverado Pickup Truck, VIN # 1GCGK29U8YZ218916
Mileage: 124,037
Drive Line: 4WD
Engine Type: 6.0L Vortec Gas Engine
Fuel Type: Gasoline
GVWR: 8,600 lbs
Transmission: Automatic
VIN #: 1GCGK29U8YZ218916

Features and Notes:265/75R16 tires, crew cab, 8' bed, 105 gallon diesel transfer tank with 12V pump, includes 3 toolboxes mounted in bed, 2" hitch receiver, New rocker panels will be installed before auction. 

135
Precision Chip Sorter
80" x 8', electric drive.

271
2003 Talbert Lo-Boy Trailer
VIN: 40FS0442831022254, Model: TDW-34SA-HRG-1-T1, GVWR: 84,120 lb., 255/70 R22.5 tires, 35 ton capacity, hydraulic cylinders for detach, 102" x 18'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, freshly sand blasted and painted.

136
Double Paddle Chain Conveyor
Electric drive 32" x 8', includes slide pan, 2' pan, 26" sides, H78 chain 2" x 11" paddles

272
1996 Fontaine Lo-Boy Trailer
Hydraulic cylinders for detach, 102" x 21'6" main deck, 44' long overall, 255/70R22.5 tires, air brakes, 35 ton capacity. Freshly sandblasted and painted.

137
Syncro Shear Vibrating Conveyor
SN: C2521-1, electric drive, 20" pan, 14" sides, 28" x 47', includes fiberglass section and chipper infeed.

273
1997 Pitts Log Trailer
VIN: 1PELT4228VP970694, 92" wide x 82" tall log bunks, 40' long, 11R24.5 tires, air brakes, freshly sandblasted and painted.

138
MDI Vibrating Conveyor Metal Detector
Includes electric box.

274
Pitts Log Trailer
VIN: 1PELT4221TP960992, 92" wide x 90" tall log bunks, 43' long, 11R24.5 tires. Freshly sandblasted and painted.

139
Fulghum 60" 8 Knife Chipper
SN: FIFIL1279, Model: 60 81, 700 rpm, electric drive not included, bottom outfeed, includes surrounding catwalk.

275
CAT 3304 Portable Genset
Engine Model: 3304D1, SN: 83703138, 466 original hours! Engine rated at 165 hp, has always been stored indoors, Generator Model: SR-4, SN: 9AB00958, mounted on 7' x 13' 6" long trailer with pintle hitch, 205/75R14 tires, in great condition, starts right up and runs strong, master battery, disconnect switch. 

140
Toshiba Electric Motor
250 hp, 460 V, 505 UZ frame, 1180 rpm.

276
1997 Eagle Transcraft Flatbed Trailer
VIN: 1TTF4820XV1052659
Model: Eagle W2-48X98
GVWR: 80,000 lb.
8' x 48', 285/75R24.5 tires, includes straps, frame will be freshly sandblasted and painted by auction. 

141
Chain Conveyor
15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, includes catwalk.

291
2008 JLG Man-Lift
SN: 0300027659, Model: 600A, LP and gas powered, 2 wheel drive, 500 lb. basket capacity, 60' reach, does not have generator, 3' x 6' x 43" deep basket with controls, 14-17.5 pneumatic tires.

142
Rader Chip Auger
Electric drive, includes support steel to ground, 5' x 18 x 5' tall box.

325
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

143
Black Clawson Shaker Screen
SN: 3892-74, Model: 612, 78" x 18', electric drive, 11' tall.

326
PWAG Track Bars for Skidder
Fits up to 20" wide tires, enough for 4 tires. 

144
Chain Conveyor
12" ladder back chain, 18" pan, 12" sides, 30" x 20' electric drive.

145
36" Blower
Electric drive, 14" x 16" top feed 13" outlet, 12' of dust pipe, 70 hp motor.

146
Paddle Chain Conveyor
H78 chain, 2" x 12" paddles, 14" pan, 9" sides, electric drive, 20" x 38'.

147
Paddle Chain Conveyor
24" pan, 16" sides, H78 chain, 2" x 12" paddles, 3' x 69' electric drive.

148
Chain Conveyor
12" ladder back chain, electric drive, 14" pan, 10" sides, 30" x 70'.

149
Paddle Chain Conveyor
3" x 13" paddles, 16" pan, 15" sides, includes slide pan and catwalk, electric drive, 20" x 108' long, includes support steel to ground.

150
Armstrong #6 RH Band Saw Sharpener
SN: 16154, electric drive, includes extra grinding wheels and all clamps and strands, Armstrong #58-B filing clamp, includes (1) 10" band on clamps.

151
Armstrong Band Sharpener
Electric drive, no clamps, includes moisture control cabinet.

152
Circle Saw Sharpener
8" grinding disc, 110 V plug in.

153
Hanchett Knife Grinder
Size-60-MG, Shop #20, electric drive, 8'4" bed, grinding wheel is chipped.

154
Thompson-Lane Saw Guide Milling Machine
SN: 776, Model: B, electric drive, mounted on top of 17" x 27" x 32" tall.

155
New Man G-132 Knife Grinder
SN: 12528, electric drive, 32" long knife capacity.

156
Shop Press
30" x 66" tall, no hydraulic jack included, rated for 30 tons.

157
Engine Hoist
Needs cylinder.

158
Cabinet with Parts
22" x 29" x 77" tall, grinding wheels, Strapping tool.

159
Hammering Block
14" x 60" x 5.5" block, includes (2) 30" x 45" x 45" steel stands, also includes 54" hydraulic cylinder.

160
Band Saw Blades
14 bands total, 9"-12" wide, fits 7' head rig, some sharpened.

175
Nicholson Ring Debarker
50" max log diameter, air cylinder on push down roll, 6' x 11'6" infeed log trough with 26" Anson chain, 30 hp hydraulic pack wit 24" x 54" x 24" tank, 3' x 6' x 2' hydraulic extra tank, includes Falk gearbox, shafts and sprockets, no drive included, dismantled and ready for loading.

176
Williams Patent Crusher and Pulverize Hammer Mill
SN: 19540, 30" x 32" top feed, 24 x 32" hammer head, bottom discharge, includes 3 extra screens, 6' x 11' x 4' tall with steel frame.

176A
Rechart 48" Chain Type Log Turner
Hydraulic drive and cylinder, brand new teeth and chain.

177
5 Strand Transfer Deck
No chain or drive, cut into sections, main deck is 14' 6" x 30' total, 5 strand 5' pop up transfer wit roller chain, includes shafts and sprockets.

178
Horizontal Air Tank
4' diameter, 12' long.

179
Horizontal Air Tank
40" diameter 9' 6" long.

180
Horizontal Air Tank
30" diameter 6' long

181
Vertical Air Tank
24" diameter 6' tall

181A
Catwalk Steps
38" x 9' 6" x 78" tall.

181B
Shop Press
Hydraulic cylinder and electric motor, 50" x 5' x 115" tall.

181C
Tyrone Berry Carriage Drive
Young cooling unit, 36" x 53" x 15" main tank, 30" x 36" x 18" auxiliary tank, no electric drive, has all pumps and gauges, condition is unknown.

181D
Skate Rolls
3 sections. (1) 20" x 9'8", 3 x 16" rolls, 18" spacing, (1) 20" x 10', 3 x 16" rolls, 18" spacing, (1) 21" x 6', 3 x 16" rolls, 18" spacing.

182
Roll Case
10 1/2" x 30" rolls, 36" spacing, includes gearbox but no motor, 4' x 31' 6" with frame.

181E
2 Strand Transfer Deck
32" x 16'6", no chain or drive, fits up to 4" wide chain.

183
Spiral Roll Case
8 1/2 x 42" rolls, 30" spacing, includes gearbox but no motor, 54" x 27'6".

184
Cox Roll Case
10 1/2" x 30" rolls, 36" spacing, 45" x 38' 6", includes gearbox but not motor.

185
Filer and Stowell Gang Edger
SN: E546305, (3) 20" blades, 2 moveable 5 x 64" infeed capacity, no drive included, 5' x 11' infeed rolls, manual blade set, 54" x 22' 6" split Roll Case outfeed with electric drive, air cylinders on board pushers, good feed rolls

186
Belt Conveyor Frame
No drive, belt, or chain. 28" pan, 19" sides, (4) 20" sections, 80' total.

187
Fulghum Vibrating Conveyor
Includes drive, no motor, 18" pan, 9" sides, 33" x 14'.

188
Webster Vibrating Conveyor
No drive, 24" pan, 6" sides, 33" x 10'.

189
Vibrating Conveyor Fiberglass Sections
(1) 18" pan, 9" sides, 33" x 5' long with 3' metal section, (1) 22" pan, 8" sides, 28" x 5' long, (1) 15" pan, 15" sides, 28" x 5' long.

190
Ederer 10 Ton Overhead Crane
SN: D-6544, 21' long.

191
Overhead Crane System
30' long, includes winch system with electric motor and 3/8" steel cable.

192
Steel Rack and Sawhorses
Rack is 5' x 7' x 8' tall, sawhorses are 2' x 26" tall, 42" wide at base

193
Corley Operator's Cab
4' x 54" x 105" tall, includes control panel and hydraulic levers.

194
Cummins 300 Power Unit with Hydraulic Unit
Big Cam, 12" x 43" x 19" hydraulic tank, hydraulic pump system, has been sitting for 3 years, ran good when last used.