June IronRing Consignment Auction
Listing ID#: 596623

Sale Location

Various, IN 46540
Sale Dates and TimesSALE IS COMPLETED
Wednesday Jun 21, 2023 Completed
Sale Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

EstateSale.com ID#: 11117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions


Bidder Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases made online. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. All payments are due immediately upon receipt of your invoice. Credit cards are only accepted on invoices with a total of less than $2500. All items are pick-up only. All items must be removed within 21 days unless otherwise noted. Loadout available by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.

“Absentee Bidder” means a person or entity that submits an Absentee Bid.

“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.

“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.

“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.

"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.

"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.

“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.

“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.

"Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.

“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.

  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.

  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 21 days to remove equipment unless noted otherwise in description.

00
Information Lot
Monthly virtual consignment auction. Online/phone bidding only. This equipment is located at various locations, please note address and phone numbers in every description. State and local taxes may apply. The Bid Book deadline to consign to the June IronRing auction is May 29.
The IronRing Auction is a reserve auction and is the only auction that
Bright Star conducts that has reserves. The auction company will not implement any of the reserves. If sellers do have a reserve, they are responsible for bidding up to that reserve. Most of the items sell without reserve so bid with confidence and bid till you’re done! If you are the last bidder, you will be the new owner.

01
Loadout Information
Buyers have 21 days to remove equipment unless noted otherwise in description.

02
Payment Information
Payment terms: 13% Buyers Premium.  Cash , check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

04
Bright Star Auctions Die-Cast Metal 1:64 Scale Peterbuilt Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

05
3156G John Deere Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

4998
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1050
Test

4999
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

5000
2016 Bobcat T595 Skid Steer
SN: B3NK11412
Meter reads: 434 hours
Engine: Doosan 2.4 L Turbo Tier 4
HP: 74
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,200 lbs
Attachments: 74" low profile bucket
A/C: Yes
Heater: Yes

Features and Notes: Other options include: Selectable Joystick Controls, Adjustable Air-Ride Suspension Seat, Power Bob-Tach Quick Attachment System, Auxiliary Hydraulics, Hydraulic Bucket Positioning, Operating Lights, Back-up Alarm, 16" Tracks, rear weights, Loaded! LOW HOURS! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 3111 Edison Road, Seymour, IA 52590

5001
2018 Gehl R165 Skid Steer
SN: GHL0R165H0D199247
Meter reads: 455 hours
Engine: Yanmar
HP: 70
Fuel type: Diesel
ROPS: Enclosed
2 Speed: Yes
Highflow: No
Lift capacity: 1,650 lb
Attachments: No
A/C: No
Heater: Yes

Features and Notes: Power quick attach, air ride seat. Low hours! This is a one owner, well maintained unit that was always kept clean and stored inside. It is in as close to new condition as you will find them. Only reason for selling is the owner bought a tractor and doesn't have use for both. Contact Jonathon with any questions 574-821-7530. Location: 4733 Grape Rd, Bremen, IN 46506

5002
2012 CAT 272D Skid Steer
SN: CAT0272DHSHY00202
Meter reads: 4,777 hours
Engine: CAT C3.8 turbo charged
HP: 98
Fuel type: Diesel
ROPS: Yes
2 Speed: Yes
Standard Flow: Yes
Attachments: 41" x 4' forks
A/C: Yes
Heater: Yes

Features and Notes: Quick attach hydraulic line was removed, 1 spare 12-16.5 tire, extra fuel filter, bearings, and parts. Contact Myron Nissley with any questions 574-536-2481. Location: 824 Turner Road, Flemingsburg, KY 41041
 

5003
2003 Rayco Super Crawler C87L Skid Steer
SN: C87L00060903
Meter reads: 875 hours
Engine: Deutz
HP: 87
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 4,000 lb
Attachments: Forks
A/C: Yes
Heater: Yes

Features and Notes: 14" steel tracks, quick attach, joystick controls, rear weights, operating lights, roll bar, has heat and AC but does not work, low hours on new undercarriage, good operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 8813 County Road 3, Freedom, NY 14065

5050
2006 CAT TH215 Telehandler
Serial No: MHS00272, Engine Model: Cat 3054B-DI, HP: 84, Fuel: Diesel, meter reads 2200 hours, hydrostatic 2-speed transmission, 5500 lbs. load capacity, 18.1' maximum lift height, 10.2' maximum forward reach, enclosed cab, no door, has heat, ac does not work, three steering modes (circle, two-wheel and crab steer) for small, confined areas, comes with 48" forks, machine is in good operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 6267 CR 400N McLeansboro IL 62859

5125
Yale Fork Lift
Model: 05030EFN24TE099, SN: D801N04757N, 3000 lb. capacity, type E, good 24V battery, in very good condition. Contact Mervin with any questions 260-599-8369. Location: E4321 St. Rd. 154, Loganville, WI 53943

5150
1985 John Deere 544C Wheel Loader
SN: DW544CD507622
Engine: 6 cylinder 414T, turbo charged
Fuel type: Diesel
ROPS: Yes, fully enclosed
3rd Valve: No 3rd valve
Tire Size: 17.5-25
Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary)
Heater: No
A/C: No
Quick Attach: No

Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should
Contact Myron Nissley with any questions 574-536-2481. Location: 8125 Priceville Road, Mumfordville, KY 42765

109

5151
Komatsu WA200 Wheel Loader
Engine: Cummins 5.9L
Fuel type: Diesel
Hours: Unknown
ROPS: Fully enclosed
3rd Valve: Yes
Center to center of pins: 40"
Lift capacity: 21,000 lbs
Tire Size: 20.5R-25
Attachments: 104" bucket
Heater: Yes
A/C: Yes
Quick Attach: Yes, JRB quick attach

Features and Notes: Heat and ac do not work, both doors missing, throttle rusted, brakes do not work, hydrostatic transmission not functioning properly, was used in a fertilizer plant, engine does run, machine operates but does need work. Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5152
1999 Volvo L70C Wheel Loader
SN: L70CV16456
Meter reads: 56.5 hours
Engine: 2244 TD 63KDE 122 hp 5.5L
Fuel type: Diesel
ROPS: Fully Enclosed
3rd Valve: No
Tire Size: 20.5 - 25
Attachments: 52" x 7" x 2 1/4" forks, 80" wide face
Heater: No
A/C: No
Quick Attach: No
4x4 Wheel Drive: Yes

Features and Notes: Loader had its engine rebuilt 2 years ago and was mainly used as a spare machine.  Transmission and the hydraulics are still running strong. Side window does not have glass and the door is uninstalled but comes with the machine. Good operating condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5153
1999 Cat IT28G Wheel Loader
SN: 8CRO1883
Meter reads: 9,535 hours
Engine: CAT diesel
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: Yes
Attachments: 48" forks
Tire size: 17.5 R25
Heater: Yes
A/C: Yes
Quick Attach: Manual

Features and Notes: 2 lever boom control, cab glass has some cracks, runs and operates. Contact Myron Nissley with any questions 574-536-2481. Location: 33548 Township Road 125, Millersburg, OH 44654

5300
1999 Caterpillar D4C XL Series III Dozer
SN: 8CS00722
Meter reads: 3844 hours
Engine: CAT 3046
Fuel type: Diesel
HP: 87
Blade: 6-way 9' blade
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: New tracks approx. 100 hours ago, new 18" grouser pads, new paint and seat, joystick controlled, hystat transmission. Very clean machine, LOW HOURS! EXCELLENT CONDITION! Contact Myron Nissley with any questions 574-536-2481. Location: 9690 Winegar RD, Greenfield, OH 45123

5301
1973 Caterpillar D4 Dozer
SN: 83J2299
Meter reads: 1,348 original hours
Engine: CAT 3304
Fuel type: Diesel
HP: 95
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, 20" grouser tracks, hydraulic auxiliary on rear, 8' blade, LOW ORIGINAL HOURS, excellent operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 2095 Macksburg Road, Winterset, IA 50273

5320
Vermeer T400-B Trencher
SN: 218
Engine: GM 253
Fuel: Diesel
Cutting width: 10" - 12"
Cutting depth: 5'
Weight: 10,940 lbs
Track width: 15"
Conveyor: 18"
ROPS: No

Features and Notes: the trencher runs great after a brief charge. The seller has some replacement parts as well. Contact Zak with any questions 260-221-2628. Location: 11205 Roth Road, Grabill, IN 46741

5350
Timberjack 450GP Skidder
Year: 1976
Make: Timberjack
Model: 450GP
SN: 450048
Engine type: Detroit 453 Diesel
Transmission: Power shift
Tire size: 23.1-26
Tire chains: Yes
Blade size: 7' wide
Grapple: No
Cable winch: Yes
ROPS: Open
Heat/AC: No

Features and Notes: Includes John Deere 4000 Series winch (SN: TOWM112006295) Good running machine! Contact Myron Nissley with any questions 574-536-2481. Location: 16989 Kinsman Rd, Middlefield, OH 44062

5351
2015 John Deere 748L Grapple Skidder
SN: 1DW748LXVFF670823
Meter reads: 9,940 hours
Blade: 9'8" W
Overall W.: 10'8"
Tire size: 30.5

Features and Notes: Has winch, runs good, has two new 30.5 L-32 LS-2 Log Stomper Xtreme tires on rear by sale date, everything works as it should. Contact Daniel with any questions 717-406-9611. Location: 520 Broadway Ave, Clarksburg, WV 26301

5360
1999 Bandit 3680 Grinder S/N:1147
Meter reads: 7180 hours, John Deere 12.5L engine, Model: 6125AF001, Serial #1147, 5' x 16' in feed web, 4' x 28' fold up discharge belt, manual or remote controls, pintle hitch, air breaks, lights. Runs and operates. Includes extra screens and some New teeth and some bolts, (Screens are1 pc. 1 1/4", 1 pc. 3", 1 pc. 2" 1 pc. 4"). Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5370
2008 Vermeer BC1800XL Chipper
VIN: 1VRY131Z681002257, GVWR: 4444kg./9918 lb., 235/75R 17.5 tires, pindle hitch, 4.5L John Deere diesel engine (SN: PE4045L027122, Model: 4045HF285), 4 extra 10" knives, infeed winch cable is broken, 2 spring tensioned vertical infeed rolls, 4 knife chipper, forward/reverse smart feed control, maintenance regularly, good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5371
2007 Vermeer BC1800XL Chipper
VIN: 1NRY1317471002028, GVWR: 4498 kg/9418 Lb., 235/75R 17.5 tires, Pintle hitch, Engine: John Deere 4.52 Diesel (Mod:4045HF285, S/N: SE40452004958) Meter reads:16 hours rebuild engine,  brand new starter, 2 spring tensioned vertical infeed rolls, new knives and hyd. motor on infeed rolls, rebuilt clutch, Forwards/Reverse Smartfeed control, 4 knives on chipper, outfeed swivel is broken. Good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5375
2017 Sennebogen 825 Knuckleboom
SN: 825.0.2481
Meter reads: 284.6 hours
Engine: Cummins QSB6.7
Fuel type: Diesel
Continuous Grapple: Yes - Rotobec
A/C: Yes
Heater: Yes

Features and Notes: Self propelled unit with high rise cab! Attachment is interchangeable with various other attachments. Has 2 self greasing units. Unit is available for preview by appointment. LOW HOUR UNIT THAT IS GOOD WORKING CONDITION. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

5400
NEW! 2023 Timber Buddy XP 380 Bandmill
Serial No: 0138-23, 4.5 Liter FPT Iveco 120 HP Diesel engine, fully hydraulic, 2" x 30" band wheels, 48" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power endfeed on tapers, outfeed belt, and laser. BRAND NEW! Contact Myron Nissley with any questions 574-536-2481. Location: 5571 State Rt. 414, Romulus, NY 14541
 

5401
2018 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has  pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, machine just had Woodmizer Gold Service Performed - Factory aligned, inspected, and lubed! CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD, Middleport, NY 14105

5402
2012 Wood-Mizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar 55 HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to be towed, the machine had been serviced, run, and tested by Woodmizer 17 hours ago. Ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5403
2012 Wood-Mizer LT-70 Bandmill
Serial No: 456D72412CNEB480, Meter reads: 7971 hours, 30 hp electric drive, 36" x 20' log capacity, 26" throat capacity, board return, 29" chain type log turner,  24" bandwheels, 15' deck,  pedestal joystick controls, Accuset II setworks.  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5404
Shop-Built Portable Circle Mill
4 HB Carriage, fully hydraulic, track is 37" center to center, 8' 8" wide x 40' long x 11' 6" high overall, pentagram arm, cable drive, pto ready, 56" circle saw blade, 18" x 15'6" off bear belt, 24" cut capacity, 16' log length capacity, includes hydraulic tank, hoses, and controls. Contact Myron Nissley with any questions 574-536-2481. Location: 7510 County Road 68, Spencerville , IN 46788

5405
2014 Cooks AC36 Portable Bandmill
SN: AC3662P071
Meter reads: Approx. 3,600 hours
Motor: Lincoln 3 phase 40 HP
Hydraulic: Yes
Setworks: No
Debarker: Yes
Bed Extensions: No
Log capacity: 36" x 21'
Throat capacity: 28" cut capacity
Fine adjustment outriggers: No
Extra wide head: No

Features and Notes: other options include dual lube/blade wipe system, board drag back system, hydraulic log turner, log lift, log clamps, log taper, squaring arms, 26" band wheels. Trailer pkg, will be in production till early June. Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650
 

5406
Cooks Cat Claw Automatic Sharpener & Dual Tooth Setter Combo
Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650

5450
Mack Maxi Cruise Semi Truck
VIN: 1M1AA13Y51W144540
Meter reads: 791,000
Engine: E7-3551380, 355 hp (SN: 1C3132)
Transmission: 8 speed manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: New engine approx. 300K miles ago, AC is currently not working, adjustable 5th wheel coupling, 11R22.5 tires, truck is currently running every day. Has a clean title, road ready.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5401
2018 Wood-Mizer LT70 Super Hydraulic Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has lazer lite, pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD,Middleport, NY 14105

5451
2007 Mack Semi Truck
VIN: 1M1AP02Y57N002018
Meter reads: 730,000 miles
Engine: 10.8L Model: MP7-395C
Transmission: 9 speed Manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb (each)
Heat: Yes
AC: Yes
Wet kit: No, was removed along with tank, controls still installed

Features and Notes: Sleeper cab, 11R22.5 tires, just had new turbo installed, truck is currently running every day. Has a clean title, road ready 
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5402
2012 Woodmizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar S5HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to towed, low hours! ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5453
1990 Ford L8000 Semi Truck
VIN: 1FTYR82A0LVA41801
Meter reads: 266,353
Engine: 7.8l, 210 hp, SN: 785228
Transmission: 6 speed
GVWR: 33,200 lb
Front axle rating: 12,000 lb
Rear axle rating: 21,200 lb
Heat: Yes
AC: Yes, but does not work
Wet kit: No

Features and Notes: Single axle, 11R22.5 tires. No power steering, selling as a yard truck. No title, bill of sale only.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5454
2004 Freightliner Columbia Semi Truck
VIN: 1FUJA6CV14PM39550
Meter reads: 740,000 miles
Engine: Mercedes Benz MBE 900
Transmission: 10 speed Manual
Heat/AC: Yes
Wet kit: No

Features and Notes: Adjustable 5th wheel coupling. Strong running engine and transmission. Seller says it has been a reliable truck, currently running every day. Clean title, road ready.
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5455
2015 Mack CXU613 Semi Truck
VIN: 1M1AW09Y9FM052319
Meter reads: 762,000 miles
Engine: 415 hp Mack MP8
Transmission: Eaton Fuller 10 speed manual
Heat/AC: Yes

Features and Notes:  Day cab, tandem axle, low profile 22.5 tires, 4-bag air ride suspension, Mack 3.79 ratio, 6x4 wd, AVS and ATC warning lights are on, comes with wet kit but not does include pto and pump, new transmission approx. 50,000 miles, still under warranty, truck runs and drives as it should. Has title but will be a delay. Contact Myron Nissley with any questions 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048

5456
1997 International 8100 4x2 Truck
VIN-1HSHBADN4VH477894, Meter reads 364,363 miles, Powered by International Diesel engine, 7 Speed Eaton Fuller transmission, 32,000 lb. GVWR, 12,000 lb. front axle rating, 20,000 lb. rear axle rating, Day cab, Single axle, 275/80R22.5 tires - in good condition, Very clean truck, Starts right up and runs strong. Has title. Contact Myron Nissley with any questions 574-536-2481. Location: 260 Elkin Wildlife Rd, Elkin, NC, 28621

5525
2010 Peerless Walking Floor Trailer
VIN: 1PLE04523APL56796
Model: 45-CTSSF
GVWR: 65,000 lb
GAWR: 22,500 lb
Tires: 11R24.5

Features and Notes: 96" wide x 45' long, open top, tarp. Clean title, road ready. Excellent Condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5526
2015 ITI Walking Floor Trailer
VIN: 1Z92B4525FT199067
Model: SFS-45
GVWR: 65,000 lb
Tires: 11R24.5 

Features and Notes: 96" wide x 45' long, open top, clean title, road ready, needs new tarp, other wise in excellent condition!
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5527
Savage 40' Self Propelled Carrier Trailer
SN: 0282305CSP405P8RK, tandem axle, dual wheel, brakes, Eaton transmission, log bunk, solid steel front and rear suspension (no springs), Saur Dan Foss hydraulic motor, front axle isolates, good operating condition. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME 04780

5528
1996 Mono 53' Trailer
VIN: 1NNVA5322TM269046, 102" wide x 53' long, has brakes and lights, rear full swinging doors, comes with 4 spare tires, DOT inspected 9/2022, road ready. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 523 Krafthill Road, Utica, PA 16362

5529
1992 Sopko Log Trailer
VIN: 1S9LS4232R1215152, 102" wide x 40' long, double bunk, tandem axle, 11R22.5 tires, Hutch supension, road ready. Has title but will be a delay. Contact Myron Nissley with any question 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048
 

5550
2018 New Holland Workmaster 70 Tractor
Serial No: NHN0319429, meter reads: 654 hours, Engine: FPT R753 2.2 L turbocharged, HP: 70, Transmission: synchronized shuttle with 8 forward and 8 reverse gears, Drive: 4x4, Rear PTO: Yes, 3 Point Hitch: Yes, LOW HOUR machine! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 153 Broadford Road, Munfordville, KY 42765

5575
Miller Pro Hay Inverter
Model: 9714 Hay Buddy, hydraulic driven, in good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5452
2007 Volvo Semi Truck
VIN: 4V4KC9EJX8NZ66926
Meter reads: 385,219
Engine: VTC D13 (SN: 50692207)
Transmission: 13 speed, FUL RTLO-16913A (SN: 50692207)
GVWR: 53,220 lb
Front axle rating: 13,220 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: 11R24.5 tires, adjustable 5th wheel coupling. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5600
Frick 3 Head Block Carriage
3 HB, hydraulic Frick setworks, 12V/hydraulic, air dogs and (2) air log turners, no scanner, carriage measures 80" wide x 12' long, 38" center to center of track, comes with 45' of track and hydraulic carriage drive. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5601
3 Headblock Corley Carriage, Track, and Frame
17‘ x 7‘ carriage, 50 foot track, air dogs on heads with electric set works. Includes controls and pantograph. No drive, pulley or cable. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5602
Husk Frame
52” x 8’6 husk, 66” x 25” off bear conveyor, 14 inch belt, no drive for hush or conveyor. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5603
Metal Cab
4‘ x 4‘ x 7‘ cab, wooden door, a/c unit. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5604
Information Lot
Here is an opportunity to purchase a Pendu Saw System. Located at 1321 Fairlane Dr, Vanceburg, KY 41179. The lots will be offered individually as well as an entirety at the end of the auction with a 10% Raise. Contact Eugene with any questions 574-242-1100

5605
3 Strand Cant Deck
LOT # 5609 SELLS FIRST (1st of an entirety) 8‘ x 161“ x 3‘, 5 foot from side to center, 32 inches from opposite side to center, 15 HP electric Drive, 14” x 88” cant slide pan. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5606
2 Strand Descrambler
LOT # 5609 SELLS FIRST (Part of an entirety) Electric Drive, 9‘ x 6‘ x 45“ overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5607
Pendu Infeed Roll case
LOT 5609 SELLS FIRST (Part of an entirety) 4“ x 14“ rolls, 15 inch roll spacing, includes cant sensors, hydraulic cylinder on cant turner, no Drive included, 20‘ x 26“ x 37“ or all size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5608
Pendu 2400 Chop Saw
THIS LOT SELLS AFTER LOT # 5609 (Part of an entirety) 24 inch blade, 20 HP electric drive, hydraulic cylinder powers swing arm, hydraulic cylinders on for adjustable board stops, waste kicker, no in feed, 15’ x 26” x 37” out feed rolls hydraulic drive, 4“ x 14“ rolls, 20 inch dust blower with 7.5 Hp electric drive and 6 inch out feed. Includes controls for roll case, swing arm, hydraulic cylinders, and edger. Model 2400, SN: 9908, manufactured in 1999. Seen minimal use (approx. 2 years total). 15‘ x 7‘ x 9‘ overall size.63“ x 63“ x 9‘ wooden cab. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5609
Pendu 4300 Gang Saw
THIS LOT SELLS FIRST BEFORE LOT # 5605 (Part of an entirety) 30 Hp electric drive on sizer head, sizer has indexable teeth, 75HP electric drive on each saw shaft, hydraulic drive on in feed press down rolls, automatic oiling system on saw shaft bearings, 12 inch wide capacity, 8 foot underbelly auger feeds 20 inch blower with 10 inch outfeed, additional 20 inch blower vacuum with 20 HP electric drive to and 10 inch outfeed. includes breaker box and 20 feet of 9 inch dust pipe. Seen minimal use (approx. 2 years total) has original feed rolls. Model M4300N serial number 9909. manufactured in 1999. 12‘ x 6‘ x 9‘ overall size. NICE UNIT!! Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5610
Belt Conveyor
(Part of an entirety) 9‘ x 18“ x 3‘, 11 inch rubber conveyor belt, no drive. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5611
Hydraulic Pack
(Part of an entirety) 48“ x 27“ x 14“ tank, 30 HP electric drive, feed hydraulics to swing arm saw and gang edger, 48” x 27 x 58” overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5612
Pendu Saw System Entirety Lot of 5604 - 5611
With 10% raise. Rare opportunity to purchase lightly used Pendu equipment. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5613
Meadows Mill
Second owner mill! Includes carriage, track, carriage drive, off feed skate rolls, and mandrel shaft. Mandrel shaft powers the husk and the carriage Drive, no electric Drive for mandrel shaft is included. Reckart carriage drive replaced original drive and has seen minimal use. Manual dogs. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5650
1996 Viking Champion 304A Pallet Nailer
SN: 745C, air/hydraulic/24V, nail bowl is 110V, 4 stringer, 72" x 60" pallet capacity, right hand operation, new chains on carriage, upgraded to heavy duty tubing, includes Viking hydraulic stacker and rollcase, comes with new Vicker's hydraulic pump, operating daily and runs very well! One owner machine! Seller is offering free delivery up to 500 miles of equipment location. Contact Myron Nissley with any questions 574-536-2481. Location: 211 Sawmill Lane, Martinsburg, PA 16662

5651
Pendu Stake Pointer
2006 Pendu Model 3800, SN: 0604-8962, 24"-8' long x 3/4" up to 2" stake capacity, air clamping system, just came out of production, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 953 Schuyler Road, Turbotville, PA 17772

5652
Pallet Chief Nailer and Stacker
Currently disassembled, includes chains, air cylinders, air lines, and electricals, fits 50"wide pallets, can stack up to 10, 3 hailing heads, nail guns not included, listed as parts, machine 1463"x6' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5675
2 Head - Brewco High Speed Band Wolf ReSaw B800
Brand new resaw - never been used. Cutting capacity - 8” wide x 9” tall,Bands - 2” wide x 20’4” long, Power - 40 HP electric drive, Drive wheels - 40” precision cast wheels, Feed system and power - Variable speed hydraulic feed, Hold down system - Hydraulic top powered front and rear hold downs Guides - Roller guide with Patented Patented floating guide, Cut adjustment- Air lift system with color coded thickness spacers with micro-adjustments Blade tensioning system - Automatic air tensioning on blade, Weight - 5,000 lbs. per head, Dust removal- 6” diameter outlet, Does not come with hydraulic unit. Heads can be used individually. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

 

5676
Metal Works 6 Head Resaw
6" infeed, Hyd motors on press rolls, currently disassembled, motors not included, 334"x 1" recrowned wheels, includes all electricals, pulleys, belts, and 92"x8" angled conveyor no drive, 40'x8X 7' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5677
2018 Wood-Mizer HR120 Resaw
SN: 04190000, 17 hp Kohler diesel engine, meter reads 755 hours, 19" band wheels, 12" thick x 16" wide capacity, machine overall measures approx. 78" long x 72" wide x 85" high, comes with approx. 15 new and 12 used 1 1/4" blades, includes a powered return system. Like new condition! Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME, 04780

5700
Gang/Edger Combo
7" x 48" capacity, (7) 24" blades, 2 blades are movable on edger side, edger side measures 20" gang side measures 14" wide, 3 15/16" arbor,  hydraulic feed motor, spacers, comes with dual tailing belts, no belt, extendable arm for switch panel, no power drive, (14)-24’’ blades most of the blades have been retipped, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 332 Oakdale Road, Salisbury, PA 15558

5701
Reckart R642 Edger
Serial No: 095, 6" thick x 42" wide cut capacity, 42" x 10' roll case infeed, (3) 20" blades - 2 are movable, 2 7/8" arbor, 50HP electric motor drive, no lasers, comes with 16' tailing arms and belt, approx. 9 resharpened blades, just came out of production and replaced with a new machine, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1321 Clymer Sherman Road, Clymer, NY 14724

 

5702
Three Blade Edger
Two moving blades, one stationary. Drive not included. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5730
Fulghum 60" Chipper
Model: 60 6K, SN: FI-FIL-1246, 60" chipper, 6 knives, 19" x 27" horizontal infeed, top discharge, 15.5" diameter x 34" slab log capacity, no drive, recently repainted, 24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5750
3 Strand Log Deck
3 strand, 22' long x 9'7" wide x 48" high, gear box drive, electric motor optional, no stop'n'load. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5751
3 Strand Log Deck
17' x 10' x 63", hydraulic drive, stop'n'load, Tulsa gear box  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5752
Log Trough
3'x28' trough,  NEW 10,000 series Charlynn hydraulic motor, new hoses, drive sprockets and shaft, new 81HH chain  30' x 4' x 6' overall size. Heavy Duty! Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5753
Barn Sweep
40' x 4' and 21' x 4' section, occasionally holes cut for filling semi trailers. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5754
Barn Sweep
40' x 4' and 20' x 4' pan, no drive, additional 3' extension for catwalk. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5755
Webster Vibrating Conveyor
24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5756
Mellott 3 Strand Log Deck
10' wide x 15' long, sits on 10" I-Beam, (3) hydraulic dogs, no stop'n'load, tulsa winch gear box, hydraulic drive. has 2 new chains Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5757
2 Strand Log Deck
40" x 30' long, gear box, no drive, excellent condition. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5799
Information Lot
Lots 5800-5812 is a complete sprayer line with a 48'' capacity and will be offered as an entirety. Lots 5814-5821 is a 60'' capacity sprayer line that does not have a sprayer or a dryer and will also be offered as an entirety with a 10% raise. Lots 5800-5828 are all located at 17090 SR 120, Bristol IN 46507. Call Bronson with any questions 574-210-3721.  

5800
Heeseman Finish Sander
(1st of an entirety) SN: 9711061 Model: LSM8, Dual 54 inch sanding belts, and 54 inch rubber in feed and out feed seatbelt, 10’ x 8’ x 8’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5801
Celfa 10’ Automatic Panel Flipper
(Part of an entirety) Includes 15‘ x 5‘ rubber roll in feed and out feed. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5802
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5803
Rubber Belt Conveyor
(Part of an entirety)197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5804
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5805
Sorbini 72" Brush Cleaning Unit
(Part of an entirety) 10" diameter brush and stand, 92” x 22” x 55” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5806
Rubber Belt Conveyor
(Part of an entirety) 18‘ x 85“ x 35“, 47 inch belt conveyor, electric drive. Does not include contents on top of conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5807
Rubber Roll Cases
(Part of an entirety) 156“ x 56“ x 37“ roll case, electric Drive, rubber rolls, 3 1/4 inch rolls, 5 inch spacing, 13’ x 62“ x 37“ roll case, electric Drive, rubber rolls, 2 1/2 inch rolls, 4 1/4 inch spacing, includes infrared scanner, 51“ x 62“ x 37“ rubber roll case, electric drive includes infrared scanner 40“ x 62“ x 37“ rubber roll case electric Drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5808
Celfa 48" Pass Through Oven
(Part of an entirety) Model: Feveu2/6ti 10000 SN: 06235/10, 34’ x 6’ x 6’ overall size, includes hot water heat exchanger, and 42 inch blower. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5809
Celfa Six Layer Stacking Dry Oven
(Part of an entirety) SN: 06235/08, Model: PF2VL6 7500, 72" x 25' x 92" overall size, includes insulation, panels, and parts, does not include heater. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5810
Heesemann 48" Cleaner/Duster
(Part of an entirety) SN: 9711071 Model: Ea-4, 44“ x 88“ x 62“ overall size, electric Drive, includes control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5811
Celfa Eco Sprayer
(Part of an entirety) Model: Roc3/D, SN: 11079/4, Two arm, four nozzle, clear and topcoat reciprocating spray unit, missing one glass door, includes air filtration unit. 62“ x 10‘ interior conveyor, 7‘ x 5‘ out feed conveyor, 12’ x 13’ 6 x 10’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5812
Bryan Flexible Tube Boiler
(Part of an entirety) Model: CL-240-W-Gi, SN: 971292, natural gas, includes 15 hp electric water pump, 92” x 36” x 54” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5813
Entirety of lots 5800-5812
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5814
Sorbini Three Head Panel Cleaner/Duster
(1st of an entirety) Model: VS–34–ACT, SN: MP35T029287, 60 inch capacity, 112" x 6‘ x 66" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5815
Celfa Automatic Panel Flipper
(Part of an entirety) Model: Trarib-3500/4250, SN: 09121/02, Includes 13’x69"x35" roll case w/ pop up transfer in feed and out feed, 13‘ x 69“ x 35“ rubber roll case, and 8‘ x 2‘ x 7‘ control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5816
Rubber Roll Cases
(Part of an entirety) 8‘ x 77” x 36“ electric drive, 75“ x 77“ x 35“ electric drive, 187“ x 77“ x 35“ electric drive, 4’ x 5’ x 3’ skate rolls. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5817
Rubber Conveyor
(Part of an entirety) 12’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5818
Rubber Conveyor
(Part of an entirety) 20’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5819
Sorbini for Head Brush and Polish Unit
(Part of an entirety) SN: MT480029288, Model: VS/26–40, 65“ x 13’ foot dust vacuum conveyor, 10 inch diameter, dusting heads, 10‘ x 11‘ x 6‘ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5820
Blowers
(Part of an entirety) 2 - 20 inch blowers, 9 inches in feed 10 inch out feed, electric drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5821
Fulton Vantage Natural Gas Boiler
(Part of an entirety) Model: VTG–3000, SN: 6499, Includes 15 HP electric water pump. 10’ x 3’ x 7’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5822
Entirety of lots 5814-5821
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5823
Safety, Cages, and Catwalks
3 bridges 7' x 4" tall clearance. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5824
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5825
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5826
Sanding Belt Racks
6' x 5' x 68" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5827
IMA Klessmann Band Edger
Type: ADVANTAGE/5620 Kom.Nr: 02156, 1" max capacity thickness, 23’ x 5’ x 6’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5828
Rubber Belt Conveyor
62“ x 13‘ x 35“ overall size, electric drive, includes all contents, barrel mixers/pumps, air hoses. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5829
2009 Keystone Stake Pointer
Model: 972, SN: BAK2X612047, 3/4" to 2" capacity, powered by 5 hp Toshiba - 3,500 rpm electric motor, lightly used, great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5830
Red-D-Ark by Miller Portable Diesel Welder
Model: D502K 5+4, SN: LC443280, Kubota V3300-B 49 hp Liquid-cooled diesel engine, meter reads: 6455 hours, DC Amperage Range: 20-600 A, auxiliary power: 4000 KW 120/240 VAC, three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8" carbons. Processes: stick, MIG, DC-TIG, Flux-Cored Welding and Air Carbon Arc Gouging, dimensions: 50"H, 30.75"W, 69.5"L, Weight: 1808 lb., Calibrated 1-29-2020, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1559 State Hwy 32, Sullivan, IL 61951

5850
CAT D333 Genset
Make: Caterpillar, Model: D333, Serial No: 58B2754, 195 HP diesel, meter reads 1131 hours, 125 KW, 3 phase, 120/208 volts, 400 amp max, runs good. Contact Myron Nissley with any questions 574-536-2481. Location: 498 Miller Lane, Morgantown, KY 42261

5900
1 Semi Load Wooden Posts
20 posts per bundle of 8”-10”x8’ and 9 bundles, 100 posts per bundle of 2.5”-3.5”x 7’. Pressure Treated with CCA. Contact Lester with any questions 812-787-3862. Location: 11029 SR 132 E, Sebree, KY 42455
 

5901
2014 Caterpillar Mulcher Attachment
Model: HM415B, SN: HMB00305, high flow head, quick attach plate, 3 hose hydraulic hook up, brush control arm, 5' cutting head, rated to take down trees up to 8" in diameter. Good operating condition
Contact Myron Nissley with any questions 574-536-2481. Location: N15504 County Road O, Thorpe, WI 54771

5902
LA-Mar Log Grapple/Winch Skid-Steer
Model: 0026, heavy duty, 18000 lb hydraulic pierce winch, 36" log capacity, like new! Contact Myron Nissley with any question 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

10000

10001

10002

10003

10004

10005

10006

10007

10008

10009

10010

10011

10012

10013

10014

10015

10016

10017

10018

10019

10020

10021

10022

10023

10024

10025

10026

10027

10028

10029

10030

10031

10032

10033

10034

10035

10036

10037

10038

10039

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

June IronRing Consignment Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone:
Sale Location
Various Locations
Various, IN 46540
Sale Dates and Times
Wednesday Jun 21, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. All payments are due immediately upon receipt of your invoice. Credit cards are only accepted on invoices with a total of less than $2500. All items are pick-up only. All items must be removed within 21 days unless otherwise noted. Loadout available by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 21 days to remove equipment unless noted otherwise in description.

00
Information Lot
Monthly virtual consignment auction. Online/phone bidding only. This equipment is located at various locations, please note address and phone numbers in every description. State and local taxes may apply. The Bid Book deadline to consign to the June IronRing auction is May 29.
The IronRing Auction is a reserve auction and is the only auction that
Bright Star conducts that has reserves. The auction company will not implement any of the reserves. If sellers do have a reserve, they are responsible for bidding up to that reserve. Most of the items sell without reserve so bid with confidence and bid till you’re done! If you are the last bidder, you will be the new owner.

01
Loadout Information
Buyers have 21 days to remove equipment unless noted otherwise in description.

02
Payment Information
Payment terms: 13% Buyers Premium.  Cash , check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

04
Bright Star Auctions Die-Cast Metal 1:64 Scale Peterbuilt Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

05
3156G John Deere Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

4998
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1050
Test

4999
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

5000
2016 Bobcat T595 Skid Steer
SN: B3NK11412
Meter reads: 434 hours
Engine: Doosan 2.4 L Turbo Tier 4
HP: 74
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,200 lbs
Attachments: 74" low profile bucket
A/C: Yes
Heater: Yes

Features and Notes: Other options include: Selectable Joystick Controls, Adjustable Air-Ride Suspension Seat, Power Bob-Tach Quick Attachment System, Auxiliary Hydraulics, Hydraulic Bucket Positioning, Operating Lights, Back-up Alarm, 16" Tracks, rear weights, Loaded! LOW HOURS! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 3111 Edison Road, Seymour, IA 52590

5001
2018 Gehl R165 Skid Steer
SN: GHL0R165H0D199247
Meter reads: 455 hours
Engine: Yanmar
HP: 70
Fuel type: Diesel
ROPS: Enclosed
2 Speed: Yes
Highflow: No
Lift capacity: 1,650 lb
Attachments: No
A/C: No
Heater: Yes

Features and Notes: Power quick attach, air ride seat. Low hours! This is a one owner, well maintained unit that was always kept clean and stored inside. It is in as close to new condition as you will find them. Only reason for selling is the owner bought a tractor and doesn't have use for both. Contact Jonathon with any questions 574-821-7530. Location: 4733 Grape Rd, Bremen, IN 46506

5002
2012 CAT 272D Skid Steer
SN: CAT0272DHSHY00202
Meter reads: 4,777 hours
Engine: CAT C3.8 turbo charged
HP: 98
Fuel type: Diesel
ROPS: Yes
2 Speed: Yes
Standard Flow: Yes
Attachments: 41" x 4' forks
A/C: Yes
Heater: Yes

Features and Notes: Quick attach hydraulic line was removed, 1 spare 12-16.5 tire, extra fuel filter, bearings, and parts. Contact Myron Nissley with any questions 574-536-2481. Location: 824 Turner Road, Flemingsburg, KY 41041
 

5003
2003 Rayco Super Crawler C87L Skid Steer
SN: C87L00060903
Meter reads: 875 hours
Engine: Deutz
HP: 87
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 4,000 lb
Attachments: Forks
A/C: Yes
Heater: Yes

Features and Notes: 14" steel tracks, quick attach, joystick controls, rear weights, operating lights, roll bar, has heat and AC but does not work, low hours on new undercarriage, good operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 8813 County Road 3, Freedom, NY 14065

5050
2006 CAT TH215 Telehandler
Serial No: MHS00272, Engine Model: Cat 3054B-DI, HP: 84, Fuel: Diesel, meter reads 2200 hours, hydrostatic 2-speed transmission, 5500 lbs. load capacity, 18.1' maximum lift height, 10.2' maximum forward reach, enclosed cab, no door, has heat, ac does not work, three steering modes (circle, two-wheel and crab steer) for small, confined areas, comes with 48" forks, machine is in good operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 6267 CR 400N McLeansboro IL 62859

5125
Yale Fork Lift
Model: 05030EFN24TE099, SN: D801N04757N, 3000 lb. capacity, type E, good 24V battery, in very good condition. Contact Mervin with any questions 260-599-8369. Location: E4321 St. Rd. 154, Loganville, WI 53943

5150
1985 John Deere 544C Wheel Loader
SN: DW544CD507622
Engine: 6 cylinder 414T, turbo charged
Fuel type: Diesel
ROPS: Yes, fully enclosed
3rd Valve: No 3rd valve
Tire Size: 17.5-25
Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary)
Heater: No
A/C: No
Quick Attach: No

Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should
Contact Myron Nissley with any questions 574-536-2481. Location: 8125 Priceville Road, Mumfordville, KY 42765

109

5151
Komatsu WA200 Wheel Loader
Engine: Cummins 5.9L
Fuel type: Diesel
Hours: Unknown
ROPS: Fully enclosed
3rd Valve: Yes
Center to center of pins: 40"
Lift capacity: 21,000 lbs
Tire Size: 20.5R-25
Attachments: 104" bucket
Heater: Yes
A/C: Yes
Quick Attach: Yes, JRB quick attach

Features and Notes: Heat and ac do not work, both doors missing, throttle rusted, brakes do not work, hydrostatic transmission not functioning properly, was used in a fertilizer plant, engine does run, machine operates but does need work. Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5152
1999 Volvo L70C Wheel Loader
SN: L70CV16456
Meter reads: 56.5 hours
Engine: 2244 TD 63KDE 122 hp 5.5L
Fuel type: Diesel
ROPS: Fully Enclosed
3rd Valve: No
Tire Size: 20.5 - 25
Attachments: 52" x 7" x 2 1/4" forks, 80" wide face
Heater: No
A/C: No
Quick Attach: No
4x4 Wheel Drive: Yes

Features and Notes: Loader had its engine rebuilt 2 years ago and was mainly used as a spare machine.  Transmission and the hydraulics are still running strong. Side window does not have glass and the door is uninstalled but comes with the machine. Good operating condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5153
1999 Cat IT28G Wheel Loader
SN: 8CRO1883
Meter reads: 9,535 hours
Engine: CAT diesel
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: Yes
Attachments: 48" forks
Tire size: 17.5 R25
Heater: Yes
A/C: Yes
Quick Attach: Manual

Features and Notes: 2 lever boom control, cab glass has some cracks, runs and operates. Contact Myron Nissley with any questions 574-536-2481. Location: 33548 Township Road 125, Millersburg, OH 44654

5300
1999 Caterpillar D4C XL Series III Dozer
SN: 8CS00722
Meter reads: 3844 hours
Engine: CAT 3046
Fuel type: Diesel
HP: 87
Blade: 6-way 9' blade
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: New tracks approx. 100 hours ago, new 18" grouser pads, new paint and seat, joystick controlled, hystat transmission. Very clean machine, LOW HOURS! EXCELLENT CONDITION! Contact Myron Nissley with any questions 574-536-2481. Location: 9690 Winegar RD, Greenfield, OH 45123

5301
1973 Caterpillar D4 Dozer
SN: 83J2299
Meter reads: 1,348 original hours
Engine: CAT 3304
Fuel type: Diesel
HP: 95
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, 20" grouser tracks, hydraulic auxiliary on rear, 8' blade, LOW ORIGINAL HOURS, excellent operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 2095 Macksburg Road, Winterset, IA 50273

5320
Vermeer T400-B Trencher
SN: 218
Engine: GM 253
Fuel: Diesel
Cutting width: 10" - 12"
Cutting depth: 5'
Weight: 10,940 lbs
Track width: 15"
Conveyor: 18"
ROPS: No

Features and Notes: the trencher runs great after a brief charge. The seller has some replacement parts as well. Contact Zak with any questions 260-221-2628. Location: 11205 Roth Road, Grabill, IN 46741

5350
Timberjack 450GP Skidder
Year: 1976
Make: Timberjack
Model: 450GP
SN: 450048
Engine type: Detroit 453 Diesel
Transmission: Power shift
Tire size: 23.1-26
Tire chains: Yes
Blade size: 7' wide
Grapple: No
Cable winch: Yes
ROPS: Open
Heat/AC: No

Features and Notes: Includes John Deere 4000 Series winch (SN: TOWM112006295) Good running machine! Contact Myron Nissley with any questions 574-536-2481. Location: 16989 Kinsman Rd, Middlefield, OH 44062

5351
2015 John Deere 748L Grapple Skidder
SN: 1DW748LXVFF670823
Meter reads: 9,940 hours
Blade: 9'8" W
Overall W.: 10'8"
Tire size: 30.5

Features and Notes: Has winch, runs good, has two new 30.5 L-32 LS-2 Log Stomper Xtreme tires on rear by sale date, everything works as it should. Contact Daniel with any questions 717-406-9611. Location: 520 Broadway Ave, Clarksburg, WV 26301

5360
1999 Bandit 3680 Grinder S/N:1147
Meter reads: 7180 hours, John Deere 12.5L engine, Model: 6125AF001, Serial #1147, 5' x 16' in feed web, 4' x 28' fold up discharge belt, manual or remote controls, pintle hitch, air breaks, lights. Runs and operates. Includes extra screens and some New teeth and some bolts, (Screens are1 pc. 1 1/4", 1 pc. 3", 1 pc. 2" 1 pc. 4"). Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5370
2008 Vermeer BC1800XL Chipper
VIN: 1VRY131Z681002257, GVWR: 4444kg./9918 lb., 235/75R 17.5 tires, pindle hitch, 4.5L John Deere diesel engine (SN: PE4045L027122, Model: 4045HF285), 4 extra 10" knives, infeed winch cable is broken, 2 spring tensioned vertical infeed rolls, 4 knife chipper, forward/reverse smart feed control, maintenance regularly, good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5371
2007 Vermeer BC1800XL Chipper
VIN: 1NRY1317471002028, GVWR: 4498 kg/9418 Lb., 235/75R 17.5 tires, Pintle hitch, Engine: John Deere 4.52 Diesel (Mod:4045HF285, S/N: SE40452004958) Meter reads:16 hours rebuild engine,  brand new starter, 2 spring tensioned vertical infeed rolls, new knives and hyd. motor on infeed rolls, rebuilt clutch, Forwards/Reverse Smartfeed control, 4 knives on chipper, outfeed swivel is broken. Good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5375
2017 Sennebogen 825 Knuckleboom
SN: 825.0.2481
Meter reads: 284.6 hours
Engine: Cummins QSB6.7
Fuel type: Diesel
Continuous Grapple: Yes - Rotobec
A/C: Yes
Heater: Yes

Features and Notes: Self propelled unit with high rise cab! Attachment is interchangeable with various other attachments. Has 2 self greasing units. Unit is available for preview by appointment. LOW HOUR UNIT THAT IS GOOD WORKING CONDITION. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

5400
NEW! 2023 Timber Buddy XP 380 Bandmill
Serial No: 0138-23, 4.5 Liter FPT Iveco 120 HP Diesel engine, fully hydraulic, 2" x 30" band wheels, 48" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power endfeed on tapers, outfeed belt, and laser. BRAND NEW! Contact Myron Nissley with any questions 574-536-2481. Location: 5571 State Rt. 414, Romulus, NY 14541
 

5401
2018 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has  pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, machine just had Woodmizer Gold Service Performed - Factory aligned, inspected, and lubed! CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD, Middleport, NY 14105

5402
2012 Wood-Mizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar 55 HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to be towed, the machine had been serviced, run, and tested by Woodmizer 17 hours ago. Ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5403
2012 Wood-Mizer LT-70 Bandmill
Serial No: 456D72412CNEB480, Meter reads: 7971 hours, 30 hp electric drive, 36" x 20' log capacity, 26" throat capacity, board return, 29" chain type log turner,  24" bandwheels, 15' deck,  pedestal joystick controls, Accuset II setworks.  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5404
Shop-Built Portable Circle Mill
4 HB Carriage, fully hydraulic, track is 37" center to center, 8' 8" wide x 40' long x 11' 6" high overall, pentagram arm, cable drive, pto ready, 56" circle saw blade, 18" x 15'6" off bear belt, 24" cut capacity, 16' log length capacity, includes hydraulic tank, hoses, and controls. Contact Myron Nissley with any questions 574-536-2481. Location: 7510 County Road 68, Spencerville , IN 46788

5405
2014 Cooks AC36 Portable Bandmill
SN: AC3662P071
Meter reads: Approx. 3,600 hours
Motor: Lincoln 3 phase 40 HP
Hydraulic: Yes
Setworks: No
Debarker: Yes
Bed Extensions: No
Log capacity: 36" x 21'
Throat capacity: 28" cut capacity
Fine adjustment outriggers: No
Extra wide head: No

Features and Notes: other options include dual lube/blade wipe system, board drag back system, hydraulic log turner, log lift, log clamps, log taper, squaring arms, 26" band wheels. Trailer pkg, will be in production till early June. Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650
 

5406
Cooks Cat Claw Automatic Sharpener & Dual Tooth Setter Combo
Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650

5450
Mack Maxi Cruise Semi Truck
VIN: 1M1AA13Y51W144540
Meter reads: 791,000
Engine: E7-3551380, 355 hp (SN: 1C3132)
Transmission: 8 speed manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: New engine approx. 300K miles ago, AC is currently not working, adjustable 5th wheel coupling, 11R22.5 tires, truck is currently running every day. Has a clean title, road ready.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5401
2018 Wood-Mizer LT70 Super Hydraulic Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has lazer lite, pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD,Middleport, NY 14105

5451
2007 Mack Semi Truck
VIN: 1M1AP02Y57N002018
Meter reads: 730,000 miles
Engine: 10.8L Model: MP7-395C
Transmission: 9 speed Manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb (each)
Heat: Yes
AC: Yes
Wet kit: No, was removed along with tank, controls still installed

Features and Notes: Sleeper cab, 11R22.5 tires, just had new turbo installed, truck is currently running every day. Has a clean title, road ready 
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5402
2012 Woodmizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar S5HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to towed, low hours! ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5453
1990 Ford L8000 Semi Truck
VIN: 1FTYR82A0LVA41801
Meter reads: 266,353
Engine: 7.8l, 210 hp, SN: 785228
Transmission: 6 speed
GVWR: 33,200 lb
Front axle rating: 12,000 lb
Rear axle rating: 21,200 lb
Heat: Yes
AC: Yes, but does not work
Wet kit: No

Features and Notes: Single axle, 11R22.5 tires. No power steering, selling as a yard truck. No title, bill of sale only.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5454
2004 Freightliner Columbia Semi Truck
VIN: 1FUJA6CV14PM39550
Meter reads: 740,000 miles
Engine: Mercedes Benz MBE 900
Transmission: 10 speed Manual
Heat/AC: Yes
Wet kit: No

Features and Notes: Adjustable 5th wheel coupling. Strong running engine and transmission. Seller says it has been a reliable truck, currently running every day. Clean title, road ready.
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5455
2015 Mack CXU613 Semi Truck
VIN: 1M1AW09Y9FM052319
Meter reads: 762,000 miles
Engine: 415 hp Mack MP8
Transmission: Eaton Fuller 10 speed manual
Heat/AC: Yes

Features and Notes:  Day cab, tandem axle, low profile 22.5 tires, 4-bag air ride suspension, Mack 3.79 ratio, 6x4 wd, AVS and ATC warning lights are on, comes with wet kit but not does include pto and pump, new transmission approx. 50,000 miles, still under warranty, truck runs and drives as it should. Has title but will be a delay. Contact Myron Nissley with any questions 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048

5456
1997 International 8100 4x2 Truck
VIN-1HSHBADN4VH477894, Meter reads 364,363 miles, Powered by International Diesel engine, 7 Speed Eaton Fuller transmission, 32,000 lb. GVWR, 12,000 lb. front axle rating, 20,000 lb. rear axle rating, Day cab, Single axle, 275/80R22.5 tires - in good condition, Very clean truck, Starts right up and runs strong. Has title. Contact Myron Nissley with any questions 574-536-2481. Location: 260 Elkin Wildlife Rd, Elkin, NC, 28621

5525
2010 Peerless Walking Floor Trailer
VIN: 1PLE04523APL56796
Model: 45-CTSSF
GVWR: 65,000 lb
GAWR: 22,500 lb
Tires: 11R24.5

Features and Notes: 96" wide x 45' long, open top, tarp. Clean title, road ready. Excellent Condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5526
2015 ITI Walking Floor Trailer
VIN: 1Z92B4525FT199067
Model: SFS-45
GVWR: 65,000 lb
Tires: 11R24.5 

Features and Notes: 96" wide x 45' long, open top, clean title, road ready, needs new tarp, other wise in excellent condition!
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5527
Savage 40' Self Propelled Carrier Trailer
SN: 0282305CSP405P8RK, tandem axle, dual wheel, brakes, Eaton transmission, log bunk, solid steel front and rear suspension (no springs), Saur Dan Foss hydraulic motor, front axle isolates, good operating condition. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME 04780

5528
1996 Mono 53' Trailer
VIN: 1NNVA5322TM269046, 102" wide x 53' long, has brakes and lights, rear full swinging doors, comes with 4 spare tires, DOT inspected 9/2022, road ready. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 523 Krafthill Road, Utica, PA 16362

5529
1992 Sopko Log Trailer
VIN: 1S9LS4232R1215152, 102" wide x 40' long, double bunk, tandem axle, 11R22.5 tires, Hutch supension, road ready. Has title but will be a delay. Contact Myron Nissley with any question 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048
 

5550
2018 New Holland Workmaster 70 Tractor
Serial No: NHN0319429, meter reads: 654 hours, Engine: FPT R753 2.2 L turbocharged, HP: 70, Transmission: synchronized shuttle with 8 forward and 8 reverse gears, Drive: 4x4, Rear PTO: Yes, 3 Point Hitch: Yes, LOW HOUR machine! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 153 Broadford Road, Munfordville, KY 42765

5575
Miller Pro Hay Inverter
Model: 9714 Hay Buddy, hydraulic driven, in good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5452
2007 Volvo Semi Truck
VIN: 4V4KC9EJX8NZ66926
Meter reads: 385,219
Engine: VTC D13 (SN: 50692207)
Transmission: 13 speed, FUL RTLO-16913A (SN: 50692207)
GVWR: 53,220 lb
Front axle rating: 13,220 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: 11R24.5 tires, adjustable 5th wheel coupling. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5600
Frick 3 Head Block Carriage
3 HB, hydraulic Frick setworks, 12V/hydraulic, air dogs and (2) air log turners, no scanner, carriage measures 80" wide x 12' long, 38" center to center of track, comes with 45' of track and hydraulic carriage drive. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5601
3 Headblock Corley Carriage, Track, and Frame
17‘ x 7‘ carriage, 50 foot track, air dogs on heads with electric set works. Includes controls and pantograph. No drive, pulley or cable. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5602
Husk Frame
52” x 8’6 husk, 66” x 25” off bear conveyor, 14 inch belt, no drive for hush or conveyor. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5603
Metal Cab
4‘ x 4‘ x 7‘ cab, wooden door, a/c unit. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5604
Information Lot
Here is an opportunity to purchase a Pendu Saw System. Located at 1321 Fairlane Dr, Vanceburg, KY 41179. The lots will be offered individually as well as an entirety at the end of the auction with a 10% Raise. Contact Eugene with any questions 574-242-1100

5605
3 Strand Cant Deck
LOT # 5609 SELLS FIRST (1st of an entirety) 8‘ x 161“ x 3‘, 5 foot from side to center, 32 inches from opposite side to center, 15 HP electric Drive, 14” x 88” cant slide pan. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5606
2 Strand Descrambler
LOT # 5609 SELLS FIRST (Part of an entirety) Electric Drive, 9‘ x 6‘ x 45“ overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5607
Pendu Infeed Roll case
LOT 5609 SELLS FIRST (Part of an entirety) 4“ x 14“ rolls, 15 inch roll spacing, includes cant sensors, hydraulic cylinder on cant turner, no Drive included, 20‘ x 26“ x 37“ or all size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5608
Pendu 2400 Chop Saw
THIS LOT SELLS AFTER LOT # 5609 (Part of an entirety) 24 inch blade, 20 HP electric drive, hydraulic cylinder powers swing arm, hydraulic cylinders on for adjustable board stops, waste kicker, no in feed, 15’ x 26” x 37” out feed rolls hydraulic drive, 4“ x 14“ rolls, 20 inch dust blower with 7.5 Hp electric drive and 6 inch out feed. Includes controls for roll case, swing arm, hydraulic cylinders, and edger. Model 2400, SN: 9908, manufactured in 1999. Seen minimal use (approx. 2 years total). 15‘ x 7‘ x 9‘ overall size.63“ x 63“ x 9‘ wooden cab. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5609
Pendu 4300 Gang Saw
THIS LOT SELLS FIRST BEFORE LOT # 5605 (Part of an entirety) 30 Hp electric drive on sizer head, sizer has indexable teeth, 75HP electric drive on each saw shaft, hydraulic drive on in feed press down rolls, automatic oiling system on saw shaft bearings, 12 inch wide capacity, 8 foot underbelly auger feeds 20 inch blower with 10 inch outfeed, additional 20 inch blower vacuum with 20 HP electric drive to and 10 inch outfeed. includes breaker box and 20 feet of 9 inch dust pipe. Seen minimal use (approx. 2 years total) has original feed rolls. Model M4300N serial number 9909. manufactured in 1999. 12‘ x 6‘ x 9‘ overall size. NICE UNIT!! Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5610
Belt Conveyor
(Part of an entirety) 9‘ x 18“ x 3‘, 11 inch rubber conveyor belt, no drive. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5611
Hydraulic Pack
(Part of an entirety) 48“ x 27“ x 14“ tank, 30 HP electric drive, feed hydraulics to swing arm saw and gang edger, 48” x 27 x 58” overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5612
Pendu Saw System Entirety Lot of 5604 - 5611
With 10% raise. Rare opportunity to purchase lightly used Pendu equipment. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5613
Meadows Mill
Second owner mill! Includes carriage, track, carriage drive, off feed skate rolls, and mandrel shaft. Mandrel shaft powers the husk and the carriage Drive, no electric Drive for mandrel shaft is included. Reckart carriage drive replaced original drive and has seen minimal use. Manual dogs. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5650
1996 Viking Champion 304A Pallet Nailer
SN: 745C, air/hydraulic/24V, nail bowl is 110V, 4 stringer, 72" x 60" pallet capacity, right hand operation, new chains on carriage, upgraded to heavy duty tubing, includes Viking hydraulic stacker and rollcase, comes with new Vicker's hydraulic pump, operating daily and runs very well! One owner machine! Seller is offering free delivery up to 500 miles of equipment location. Contact Myron Nissley with any questions 574-536-2481. Location: 211 Sawmill Lane, Martinsburg, PA 16662

5651
Pendu Stake Pointer
2006 Pendu Model 3800, SN: 0604-8962, 24"-8' long x 3/4" up to 2" stake capacity, air clamping system, just came out of production, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 953 Schuyler Road, Turbotville, PA 17772

5652
Pallet Chief Nailer and Stacker
Currently disassembled, includes chains, air cylinders, air lines, and electricals, fits 50"wide pallets, can stack up to 10, 3 hailing heads, nail guns not included, listed as parts, machine 1463"x6' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5675
2 Head - Brewco High Speed Band Wolf ReSaw B800
Brand new resaw - never been used. Cutting capacity - 8” wide x 9” tall,Bands - 2” wide x 20’4” long, Power - 40 HP electric drive, Drive wheels - 40” precision cast wheels, Feed system and power - Variable speed hydraulic feed, Hold down system - Hydraulic top powered front and rear hold downs Guides - Roller guide with Patented Patented floating guide, Cut adjustment- Air lift system with color coded thickness spacers with micro-adjustments Blade tensioning system - Automatic air tensioning on blade, Weight - 5,000 lbs. per head, Dust removal- 6” diameter outlet, Does not come with hydraulic unit. Heads can be used individually. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

 

5676
Metal Works 6 Head Resaw
6" infeed, Hyd motors on press rolls, currently disassembled, motors not included, 334"x 1" recrowned wheels, includes all electricals, pulleys, belts, and 92"x8" angled conveyor no drive, 40'x8X 7' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5677
2018 Wood-Mizer HR120 Resaw
SN: 04190000, 17 hp Kohler diesel engine, meter reads 755 hours, 19" band wheels, 12" thick x 16" wide capacity, machine overall measures approx. 78" long x 72" wide x 85" high, comes with approx. 15 new and 12 used 1 1/4" blades, includes a powered return system. Like new condition! Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME, 04780

5700
Gang/Edger Combo
7" x 48" capacity, (7) 24" blades, 2 blades are movable on edger side, edger side measures 20" gang side measures 14" wide, 3 15/16" arbor,  hydraulic feed motor, spacers, comes with dual tailing belts, no belt, extendable arm for switch panel, no power drive, (14)-24’’ blades most of the blades have been retipped, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 332 Oakdale Road, Salisbury, PA 15558

5701
Reckart R642 Edger
Serial No: 095, 6" thick x 42" wide cut capacity, 42" x 10' roll case infeed, (3) 20" blades - 2 are movable, 2 7/8" arbor, 50HP electric motor drive, no lasers, comes with 16' tailing arms and belt, approx. 9 resharpened blades, just came out of production and replaced with a new machine, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1321 Clymer Sherman Road, Clymer, NY 14724

 

5702
Three Blade Edger
Two moving blades, one stationary. Drive not included. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5730
Fulghum 60" Chipper
Model: 60 6K, SN: FI-FIL-1246, 60" chipper, 6 knives, 19" x 27" horizontal infeed, top discharge, 15.5" diameter x 34" slab log capacity, no drive, recently repainted, 24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5750
3 Strand Log Deck
3 strand, 22' long x 9'7" wide x 48" high, gear box drive, electric motor optional, no stop'n'load. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5751
3 Strand Log Deck
17' x 10' x 63", hydraulic drive, stop'n'load, Tulsa gear box  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5752
Log Trough
3'x28' trough,  NEW 10,000 series Charlynn hydraulic motor, new hoses, drive sprockets and shaft, new 81HH chain  30' x 4' x 6' overall size. Heavy Duty! Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5753
Barn Sweep
40' x 4' and 21' x 4' section, occasionally holes cut for filling semi trailers. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5754
Barn Sweep
40' x 4' and 20' x 4' pan, no drive, additional 3' extension for catwalk. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5755
Webster Vibrating Conveyor
24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5756
Mellott 3 Strand Log Deck
10' wide x 15' long, sits on 10" I-Beam, (3) hydraulic dogs, no stop'n'load, tulsa winch gear box, hydraulic drive. has 2 new chains Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5757
2 Strand Log Deck
40" x 30' long, gear box, no drive, excellent condition. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5799
Information Lot
Lots 5800-5812 is a complete sprayer line with a 48'' capacity and will be offered as an entirety. Lots 5814-5821 is a 60'' capacity sprayer line that does not have a sprayer or a dryer and will also be offered as an entirety with a 10% raise. Lots 5800-5828 are all located at 17090 SR 120, Bristol IN 46507. Call Bronson with any questions 574-210-3721.  

5800
Heeseman Finish Sander
(1st of an entirety) SN: 9711061 Model: LSM8, Dual 54 inch sanding belts, and 54 inch rubber in feed and out feed seatbelt, 10’ x 8’ x 8’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5801
Celfa 10’ Automatic Panel Flipper
(Part of an entirety) Includes 15‘ x 5‘ rubber roll in feed and out feed. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5802
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5803
Rubber Belt Conveyor
(Part of an entirety)197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5804
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5805
Sorbini 72" Brush Cleaning Unit
(Part of an entirety) 10" diameter brush and stand, 92” x 22” x 55” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5806
Rubber Belt Conveyor
(Part of an entirety) 18‘ x 85“ x 35“, 47 inch belt conveyor, electric drive. Does not include contents on top of conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5807
Rubber Roll Cases
(Part of an entirety) 156“ x 56“ x 37“ roll case, electric Drive, rubber rolls, 3 1/4 inch rolls, 5 inch spacing, 13’ x 62“ x 37“ roll case, electric Drive, rubber rolls, 2 1/2 inch rolls, 4 1/4 inch spacing, includes infrared scanner, 51“ x 62“ x 37“ rubber roll case, electric drive includes infrared scanner 40“ x 62“ x 37“ rubber roll case electric Drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5808
Celfa 48" Pass Through Oven
(Part of an entirety) Model: Feveu2/6ti 10000 SN: 06235/10, 34’ x 6’ x 6’ overall size, includes hot water heat exchanger, and 42 inch blower. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5809
Celfa Six Layer Stacking Dry Oven
(Part of an entirety) SN: 06235/08, Model: PF2VL6 7500, 72" x 25' x 92" overall size, includes insulation, panels, and parts, does not include heater. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5810
Heesemann 48" Cleaner/Duster
(Part of an entirety) SN: 9711071 Model: Ea-4, 44“ x 88“ x 62“ overall size, electric Drive, includes control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5811
Celfa Eco Sprayer
(Part of an entirety) Model: Roc3/D, SN: 11079/4, Two arm, four nozzle, clear and topcoat reciprocating spray unit, missing one glass door, includes air filtration unit. 62“ x 10‘ interior conveyor, 7‘ x 5‘ out feed conveyor, 12’ x 13’ 6 x 10’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5812
Bryan Flexible Tube Boiler
(Part of an entirety) Model: CL-240-W-Gi, SN: 971292, natural gas, includes 15 hp electric water pump, 92” x 36” x 54” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5813
Entirety of lots 5800-5812
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5814
Sorbini Three Head Panel Cleaner/Duster
(1st of an entirety) Model: VS–34–ACT, SN: MP35T029287, 60 inch capacity, 112" x 6‘ x 66" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5815
Celfa Automatic Panel Flipper
(Part of an entirety) Model: Trarib-3500/4250, SN: 09121/02, Includes 13’x69"x35" roll case w/ pop up transfer in feed and out feed, 13‘ x 69“ x 35“ rubber roll case, and 8‘ x 2‘ x 7‘ control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5816
Rubber Roll Cases
(Part of an entirety) 8‘ x 77” x 36“ electric drive, 75“ x 77“ x 35“ electric drive, 187“ x 77“ x 35“ electric drive, 4’ x 5’ x 3’ skate rolls. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5817
Rubber Conveyor
(Part of an entirety) 12’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5818
Rubber Conveyor
(Part of an entirety) 20’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5819
Sorbini for Head Brush and Polish Unit
(Part of an entirety) SN: MT480029288, Model: VS/26–40, 65“ x 13’ foot dust vacuum conveyor, 10 inch diameter, dusting heads, 10‘ x 11‘ x 6‘ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5820
Blowers
(Part of an entirety) 2 - 20 inch blowers, 9 inches in feed 10 inch out feed, electric drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5821
Fulton Vantage Natural Gas Boiler
(Part of an entirety) Model: VTG–3000, SN: 6499, Includes 15 HP electric water pump. 10’ x 3’ x 7’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5822
Entirety of lots 5814-5821
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5823
Safety, Cages, and Catwalks
3 bridges 7' x 4" tall clearance. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5824
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5825
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5826
Sanding Belt Racks
6' x 5' x 68" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5827
IMA Klessmann Band Edger
Type: ADVANTAGE/5620 Kom.Nr: 02156, 1" max capacity thickness, 23’ x 5’ x 6’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5828
Rubber Belt Conveyor
62“ x 13‘ x 35“ overall size, electric drive, includes all contents, barrel mixers/pumps, air hoses. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5829
2009 Keystone Stake Pointer
Model: 972, SN: BAK2X612047, 3/4" to 2" capacity, powered by 5 hp Toshiba - 3,500 rpm electric motor, lightly used, great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5830
Red-D-Ark by Miller Portable Diesel Welder
Model: D502K 5+4, SN: LC443280, Kubota V3300-B 49 hp Liquid-cooled diesel engine, meter reads: 6455 hours, DC Amperage Range: 20-600 A, auxiliary power: 4000 KW 120/240 VAC, three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8" carbons. Processes: stick, MIG, DC-TIG, Flux-Cored Welding and Air Carbon Arc Gouging, dimensions: 50"H, 30.75"W, 69.5"L, Weight: 1808 lb., Calibrated 1-29-2020, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1559 State Hwy 32, Sullivan, IL 61951

5850
CAT D333 Genset
Make: Caterpillar, Model: D333, Serial No: 58B2754, 195 HP diesel, meter reads 1131 hours, 125 KW, 3 phase, 120/208 volts, 400 amp max, runs good. Contact Myron Nissley with any questions 574-536-2481. Location: 498 Miller Lane, Morgantown, KY 42261

5900
1 Semi Load Wooden Posts
20 posts per bundle of 8”-10”x8’ and 9 bundles, 100 posts per bundle of 2.5”-3.5”x 7’. Pressure Treated with CCA. Contact Lester with any questions 812-787-3862. Location: 11029 SR 132 E, Sebree, KY 42455
 

5901
2014 Caterpillar Mulcher Attachment
Model: HM415B, SN: HMB00305, high flow head, quick attach plate, 3 hose hydraulic hook up, brush control arm, 5' cutting head, rated to take down trees up to 8" in diameter. Good operating condition
Contact Myron Nissley with any questions 574-536-2481. Location: N15504 County Road O, Thorpe, WI 54771

5902
LA-Mar Log Grapple/Winch Skid-Steer
Model: 0026, heavy duty, 18000 lb hydraulic pierce winch, 36" log capacity, like new! Contact Myron Nissley with any question 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

10000

10001

10002

10003

10004

10005

10006

10007

10008

10009

10010

10011

10012

10013

10014

10015

10016

10017

10018

10019

10020

10021

10022

10023

10024

10025

10026

10027

10028

10029

10030

10031

10032

10033

10034

10035

10036

10037

10038

10039

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
June IronRing Consignment Auction
 Live Auction
 
Sale Date(s)
Wednesday Jun 21, 2023 Completed
Sale Location

Various, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. All payments are due immediately upon receipt of your invoice. Credit cards are only accepted on invoices with a total of less than $2500. All items are pick-up only. All items must be removed within 21 days unless otherwise noted. Loadout available by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  2. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  3. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  4. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  5. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  6. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  7. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  8. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  9. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  10. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  11. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  12. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  13. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  14. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  15. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  16. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  17. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  18. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  19. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  20. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  21. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  22. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  23. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  24. Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  25. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  26. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
  27. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  28. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  29. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  30. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  31. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  32. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  33. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  34. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  35. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  36. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  37. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  38. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 21 days to remove equipment unless noted otherwise in description.

00
Information Lot
Monthly virtual consignment auction. Online/phone bidding only. This equipment is located at various locations, please note address and phone numbers in every description. State and local taxes may apply. The Bid Book deadline to consign to the June IronRing auction is May 29.
The IronRing Auction is a reserve auction and is the only auction that
Bright Star conducts that has reserves. The auction company will not implement any of the reserves. If sellers do have a reserve, they are responsible for bidding up to that reserve. Most of the items sell without reserve so bid with confidence and bid till you’re done! If you are the last bidder, you will be the new owner.

01
Loadout Information
Buyers have 21 days to remove equipment unless noted otherwise in description.

02
Payment Information
Payment terms: 13% Buyers Premium.  Cash , check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.
 

04
Bright Star Auctions Die-Cast Metal 1:64 Scale Peterbuilt Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

05
3156G John Deere Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

4998
Heavy Equipment Key Set 36 Keys
Shipping available for $20

1050
Test

4999
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

5000
2016 Bobcat T595 Skid Steer
SN: B3NK11412
Meter reads: 434 hours
Engine: Doosan 2.4 L Turbo Tier 4
HP: 74
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 2,200 lbs
Attachments: 74" low profile bucket
A/C: Yes
Heater: Yes

Features and Notes: Other options include: Selectable Joystick Controls, Adjustable Air-Ride Suspension Seat, Power Bob-Tach Quick Attachment System, Auxiliary Hydraulics, Hydraulic Bucket Positioning, Operating Lights, Back-up Alarm, 16" Tracks, rear weights, Loaded! LOW HOURS! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 3111 Edison Road, Seymour, IA 52590

5001
2018 Gehl R165 Skid Steer
SN: GHL0R165H0D199247
Meter reads: 455 hours
Engine: Yanmar
HP: 70
Fuel type: Diesel
ROPS: Enclosed
2 Speed: Yes
Highflow: No
Lift capacity: 1,650 lb
Attachments: No
A/C: No
Heater: Yes

Features and Notes: Power quick attach, air ride seat. Low hours! This is a one owner, well maintained unit that was always kept clean and stored inside. It is in as close to new condition as you will find them. Only reason for selling is the owner bought a tractor and doesn't have use for both. Contact Jonathon with any questions 574-821-7530. Location: 4733 Grape Rd, Bremen, IN 46506

5002
2012 CAT 272D Skid Steer
SN: CAT0272DHSHY00202
Meter reads: 4,777 hours
Engine: CAT C3.8 turbo charged
HP: 98
Fuel type: Diesel
ROPS: Yes
2 Speed: Yes
Standard Flow: Yes
Attachments: 41" x 4' forks
A/C: Yes
Heater: Yes

Features and Notes: Quick attach hydraulic line was removed, 1 spare 12-16.5 tire, extra fuel filter, bearings, and parts. Contact Myron Nissley with any questions 574-536-2481. Location: 824 Turner Road, Flemingsburg, KY 41041
 

5003
2003 Rayco Super Crawler C87L Skid Steer
SN: C87L00060903
Meter reads: 875 hours
Engine: Deutz
HP: 87
Fuel type: Diesel
ROPS: Fully enclosed
2 Speed: Yes
Highflow: Yes
Lift capacity: 4,000 lb
Attachments: Forks
A/C: Yes
Heater: Yes

Features and Notes: 14" steel tracks, quick attach, joystick controls, rear weights, operating lights, roll bar, has heat and AC but does not work, low hours on new undercarriage, good operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 8813 County Road 3, Freedom, NY 14065

5050
2006 CAT TH215 Telehandler
Serial No: MHS00272, Engine Model: Cat 3054B-DI, HP: 84, Fuel: Diesel, meter reads 2200 hours, hydrostatic 2-speed transmission, 5500 lbs. load capacity, 18.1' maximum lift height, 10.2' maximum forward reach, enclosed cab, no door, has heat, ac does not work, three steering modes (circle, two-wheel and crab steer) for small, confined areas, comes with 48" forks, machine is in good operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 6267 CR 400N McLeansboro IL 62859

5125
Yale Fork Lift
Model: 05030EFN24TE099, SN: D801N04757N, 3000 lb. capacity, type E, good 24V battery, in very good condition. Contact Mervin with any questions 260-599-8369. Location: E4321 St. Rd. 154, Loganville, WI 53943

5150
1985 John Deere 544C Wheel Loader
SN: DW544CD507622
Engine: 6 cylinder 414T, turbo charged
Fuel type: Diesel
ROPS: Yes, fully enclosed
3rd Valve: No 3rd valve
Tire Size: 17.5-25
Attachments: 104" bucket, 4' x 6" x 2" forks (one fork is stationary)
Heater: No
A/C: No
Quick Attach: No

Features and Notes: fuel gauge is broken, machine occasionally spits radiator fluid out of over flow when decelerating from a high rpm. comes with extra 17.5-25 tire and rim, engine runs strong, operates the way it should
Contact Myron Nissley with any questions 574-536-2481. Location: 8125 Priceville Road, Mumfordville, KY 42765

109

5151
Komatsu WA200 Wheel Loader
Engine: Cummins 5.9L
Fuel type: Diesel
Hours: Unknown
ROPS: Fully enclosed
3rd Valve: Yes
Center to center of pins: 40"
Lift capacity: 21,000 lbs
Tire Size: 20.5R-25
Attachments: 104" bucket
Heater: Yes
A/C: Yes
Quick Attach: Yes, JRB quick attach

Features and Notes: Heat and ac do not work, both doors missing, throttle rusted, brakes do not work, hydrostatic transmission not functioning properly, was used in a fertilizer plant, engine does run, machine operates but does need work. Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5152
1999 Volvo L70C Wheel Loader
SN: L70CV16456
Meter reads: 56.5 hours
Engine: 2244 TD 63KDE 122 hp 5.5L
Fuel type: Diesel
ROPS: Fully Enclosed
3rd Valve: No
Tire Size: 20.5 - 25
Attachments: 52" x 7" x 2 1/4" forks, 80" wide face
Heater: No
A/C: No
Quick Attach: No
4x4 Wheel Drive: Yes

Features and Notes: Loader had its engine rebuilt 2 years ago and was mainly used as a spare machine.  Transmission and the hydraulics are still running strong. Side window does not have glass and the door is uninstalled but comes with the machine. Good operating condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5153
1999 Cat IT28G Wheel Loader
SN: 8CRO1883
Meter reads: 9,535 hours
Engine: CAT diesel
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: Yes
Attachments: 48" forks
Tire size: 17.5 R25
Heater: Yes
A/C: Yes
Quick Attach: Manual

Features and Notes: 2 lever boom control, cab glass has some cracks, runs and operates. Contact Myron Nissley with any questions 574-536-2481. Location: 33548 Township Road 125, Millersburg, OH 44654

5300
1999 Caterpillar D4C XL Series III Dozer
SN: 8CS00722
Meter reads: 3844 hours
Engine: CAT 3046
Fuel type: Diesel
HP: 87
Blade: 6-way 9' blade
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: New tracks approx. 100 hours ago, new 18" grouser pads, new paint and seat, joystick controlled, hystat transmission. Very clean machine, LOW HOURS! EXCELLENT CONDITION! Contact Myron Nissley with any questions 574-536-2481. Location: 9690 Winegar RD, Greenfield, OH 45123

5301
1973 Caterpillar D4 Dozer
SN: 83J2299
Meter reads: 1,348 original hours
Engine: CAT 3304
Fuel type: Diesel
HP: 95
ROPS: Open cab
A/C: No
Heater: No

Features and Notes: Powershift transmission, 20" grouser tracks, hydraulic auxiliary on rear, 8' blade, LOW ORIGINAL HOURS, excellent operating condition! Contact Myron Nissley with any questions 574-536-2481. Location: 2095 Macksburg Road, Winterset, IA 50273

5320
Vermeer T400-B Trencher
SN: 218
Engine: GM 253
Fuel: Diesel
Cutting width: 10" - 12"
Cutting depth: 5'
Weight: 10,940 lbs
Track width: 15"
Conveyor: 18"
ROPS: No

Features and Notes: the trencher runs great after a brief charge. The seller has some replacement parts as well. Contact Zak with any questions 260-221-2628. Location: 11205 Roth Road, Grabill, IN 46741

5350
Timberjack 450GP Skidder
Year: 1976
Make: Timberjack
Model: 450GP
SN: 450048
Engine type: Detroit 453 Diesel
Transmission: Power shift
Tire size: 23.1-26
Tire chains: Yes
Blade size: 7' wide
Grapple: No
Cable winch: Yes
ROPS: Open
Heat/AC: No

Features and Notes: Includes John Deere 4000 Series winch (SN: TOWM112006295) Good running machine! Contact Myron Nissley with any questions 574-536-2481. Location: 16989 Kinsman Rd, Middlefield, OH 44062

5351
2015 John Deere 748L Grapple Skidder
SN: 1DW748LXVFF670823
Meter reads: 9,940 hours
Blade: 9'8" W
Overall W.: 10'8"
Tire size: 30.5

Features and Notes: Has winch, runs good, has two new 30.5 L-32 LS-2 Log Stomper Xtreme tires on rear by sale date, everything works as it should. Contact Daniel with any questions 717-406-9611. Location: 520 Broadway Ave, Clarksburg, WV 26301

5360
1999 Bandit 3680 Grinder S/N:1147
Meter reads: 7180 hours, John Deere 12.5L engine, Model: 6125AF001, Serial #1147, 5' x 16' in feed web, 4' x 28' fold up discharge belt, manual or remote controls, pintle hitch, air breaks, lights. Runs and operates. Includes extra screens and some New teeth and some bolts, (Screens are1 pc. 1 1/4", 1 pc. 3", 1 pc. 2" 1 pc. 4"). Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5370
2008 Vermeer BC1800XL Chipper
VIN: 1VRY131Z681002257, GVWR: 4444kg./9918 lb., 235/75R 17.5 tires, pindle hitch, 4.5L John Deere diesel engine (SN: PE4045L027122, Model: 4045HF285), 4 extra 10" knives, infeed winch cable is broken, 2 spring tensioned vertical infeed rolls, 4 knife chipper, forward/reverse smart feed control, maintenance regularly, good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5371
2007 Vermeer BC1800XL Chipper
VIN: 1NRY1317471002028, GVWR: 4498 kg/9418 Lb., 235/75R 17.5 tires, Pintle hitch, Engine: John Deere 4.52 Diesel (Mod:4045HF285, S/N: SE40452004958) Meter reads:16 hours rebuild engine,  brand new starter, 2 spring tensioned vertical infeed rolls, new knives and hyd. motor on infeed rolls, rebuilt clutch, Forwards/Reverse Smartfeed control, 4 knives on chipper, outfeed swivel is broken. Good running condition. No titles, bill of sale only. Contact Eugene with any questions 574-242-1100. Location: 358 Sloan Fork Road, Liberty, KY 42539

5375
2017 Sennebogen 825 Knuckleboom
SN: 825.0.2481
Meter reads: 284.6 hours
Engine: Cummins QSB6.7
Fuel type: Diesel
Continuous Grapple: Yes - Rotobec
A/C: Yes
Heater: Yes

Features and Notes: Self propelled unit with high rise cab! Attachment is interchangeable with various other attachments. Has 2 self greasing units. Unit is available for preview by appointment. LOW HOUR UNIT THAT IS GOOD WORKING CONDITION. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

5400
NEW! 2023 Timber Buddy XP 380 Bandmill
Serial No: 0138-23, 4.5 Liter FPT Iveco 120 HP Diesel engine, fully hydraulic, 2" x 30" band wheels, 48" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power endfeed on tapers, outfeed belt, and laser. BRAND NEW! Contact Myron Nissley with any questions 574-536-2481. Location: 5571 State Rt. 414, Romulus, NY 14541
 

5401
2018 Wood-Mizer LT70 Super Hydraulic Wide Throat Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has  pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, machine just had Woodmizer Gold Service Performed - Factory aligned, inspected, and lubed! CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD, Middleport, NY 14105

5402
2012 Wood-Mizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar 55 HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to be towed, the machine had been serviced, run, and tested by Woodmizer 17 hours ago. Ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5403
2012 Wood-Mizer LT-70 Bandmill
Serial No: 456D72412CNEB480, Meter reads: 7971 hours, 30 hp electric drive, 36" x 20' log capacity, 26" throat capacity, board return, 29" chain type log turner,  24" bandwheels, 15' deck,  pedestal joystick controls, Accuset II setworks.  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5404
Shop-Built Portable Circle Mill
4 HB Carriage, fully hydraulic, track is 37" center to center, 8' 8" wide x 40' long x 11' 6" high overall, pentagram arm, cable drive, pto ready, 56" circle saw blade, 18" x 15'6" off bear belt, 24" cut capacity, 16' log length capacity, includes hydraulic tank, hoses, and controls. Contact Myron Nissley with any questions 574-536-2481. Location: 7510 County Road 68, Spencerville , IN 46788

5405
2014 Cooks AC36 Portable Bandmill
SN: AC3662P071
Meter reads: Approx. 3,600 hours
Motor: Lincoln 3 phase 40 HP
Hydraulic: Yes
Setworks: No
Debarker: Yes
Bed Extensions: No
Log capacity: 36" x 21'
Throat capacity: 28" cut capacity
Fine adjustment outriggers: No
Extra wide head: No

Features and Notes: other options include dual lube/blade wipe system, board drag back system, hydraulic log turner, log lift, log clamps, log taper, squaring arms, 26" band wheels. Trailer pkg, will be in production till early June. Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650
 

5406
Cooks Cat Claw Automatic Sharpener & Dual Tooth Setter Combo
Contact Myron Nissley with any questions 574-536-2481. Location: 17144 County Road 340, Flemington, MO 65650

5450
Mack Maxi Cruise Semi Truck
VIN: 1M1AA13Y51W144540
Meter reads: 791,000
Engine: E7-3551380, 355 hp (SN: 1C3132)
Transmission: 8 speed manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: New engine approx. 300K miles ago, AC is currently not working, adjustable 5th wheel coupling, 11R22.5 tires, truck is currently running every day. Has a clean title, road ready.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5401
2018 Wood-Mizer LT70 Super Hydraulic Portable Bandmill
SN: 456D7241XJNLA5206
Meter reads: 4,481 hours
Engine: Yanmar 55hp Diesel
Fully Hydraulic
Setworks: Yes, computer setworks
Debarker: Yes
Log Capacity: 36" x 20'2"
Throat Capacity: 34"
Fine adjustment outriggers: Yes
Extra wide head: Yes
Stationary control system: Yes

Features and Notes:  Hydraulic loading arms, log clamps, bi-directional chain log turner, hydraulic blade tension, board return arm and table, laser sight, Lube-Mizer lubrication system, has lazer lite, pedestal control station with fully-proportional joystick controls, 24" band wheels, trailer package, CLEAN! LOADED! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 9441 Seaman RD,Middleport, NY 14105

5451
2007 Mack Semi Truck
VIN: 1M1AP02Y57N002018
Meter reads: 730,000 miles
Engine: 10.8L Model: MP7-395C
Transmission: 9 speed Manual
GVWR: 52,000 lb
Front axle rating: 12,000 lb
Rear axle rating: 20,000 lb (each)
Heat: Yes
AC: Yes
Wet kit: No, was removed along with tank, controls still installed

Features and Notes: Sleeper cab, 11R22.5 tires, just had new turbo installed, truck is currently running every day. Has a clean title, road ready 
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5402
2012 Woodmizer LT70 Portable Bandmill
SN: 456D72410CNCB4869, Meter reads: 64 hours, Yanmar S5HP Diesel, hydraulic, Accuset setworks, Has debarker, log capacity: 36" x 20', throat capacity: 26", fine adjustment outriggers, pedestal control system, Lube-Mizer blade lubrication system, bi-directional chain log turner, log clamps, 2 15/16" ball hitch ready to towed, low hours! ready for production. Great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 21258 NC 32 North, Pantego, NC 27860

5453
1990 Ford L8000 Semi Truck
VIN: 1FTYR82A0LVA41801
Meter reads: 266,353
Engine: 7.8l, 210 hp, SN: 785228
Transmission: 6 speed
GVWR: 33,200 lb
Front axle rating: 12,000 lb
Rear axle rating: 21,200 lb
Heat: Yes
AC: Yes, but does not work
Wet kit: No

Features and Notes: Single axle, 11R22.5 tires. No power steering, selling as a yard truck. No title, bill of sale only.
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5454
2004 Freightliner Columbia Semi Truck
VIN: 1FUJA6CV14PM39550
Meter reads: 740,000 miles
Engine: Mercedes Benz MBE 900
Transmission: 10 speed Manual
Heat/AC: Yes
Wet kit: No

Features and Notes: Adjustable 5th wheel coupling. Strong running engine and transmission. Seller says it has been a reliable truck, currently running every day. Clean title, road ready.
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5455
2015 Mack CXU613 Semi Truck
VIN: 1M1AW09Y9FM052319
Meter reads: 762,000 miles
Engine: 415 hp Mack MP8
Transmission: Eaton Fuller 10 speed manual
Heat/AC: Yes

Features and Notes:  Day cab, tandem axle, low profile 22.5 tires, 4-bag air ride suspension, Mack 3.79 ratio, 6x4 wd, AVS and ATC warning lights are on, comes with wet kit but not does include pto and pump, new transmission approx. 50,000 miles, still under warranty, truck runs and drives as it should. Has title but will be a delay. Contact Myron Nissley with any questions 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048

5456
1997 International 8100 4x2 Truck
VIN-1HSHBADN4VH477894, Meter reads 364,363 miles, Powered by International Diesel engine, 7 Speed Eaton Fuller transmission, 32,000 lb. GVWR, 12,000 lb. front axle rating, 20,000 lb. rear axle rating, Day cab, Single axle, 275/80R22.5 tires - in good condition, Very clean truck, Starts right up and runs strong. Has title. Contact Myron Nissley with any questions 574-536-2481. Location: 260 Elkin Wildlife Rd, Elkin, NC, 28621

5525
2010 Peerless Walking Floor Trailer
VIN: 1PLE04523APL56796
Model: 45-CTSSF
GVWR: 65,000 lb
GAWR: 22,500 lb
Tires: 11R24.5

Features and Notes: 96" wide x 45' long, open top, tarp. Clean title, road ready. Excellent Condition!
Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5526
2015 ITI Walking Floor Trailer
VIN: 1Z92B4525FT199067
Model: SFS-45
GVWR: 65,000 lb
Tires: 11R24.5 

Features and Notes: 96" wide x 45' long, open top, clean title, road ready, needs new tarp, other wise in excellent condition!
 Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5527
Savage 40' Self Propelled Carrier Trailer
SN: 0282305CSP405P8RK, tandem axle, dual wheel, brakes, Eaton transmission, log bunk, solid steel front and rear suspension (no springs), Saur Dan Foss hydraulic motor, front axle isolates, good operating condition. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME 04780

5528
1996 Mono 53' Trailer
VIN: 1NNVA5322TM269046, 102" wide x 53' long, has brakes and lights, rear full swinging doors, comes with 4 spare tires, DOT inspected 9/2022, road ready. No title, bill of sale only. Contact Myron Nissley with any questions 574-536-2481. Location: 523 Krafthill Road, Utica, PA 16362

5529
1992 Sopko Log Trailer
VIN: 1S9LS4232R1215152, 102" wide x 40' long, double bunk, tandem axle, 11R22.5 tires, Hutch supension, road ready. Has title but will be a delay. Contact Myron Nissley with any question 574-536-2481. Location: 3442 NC Hwy 135, Stoneville, NC 27048
 

5550
2018 New Holland Workmaster 70 Tractor
Serial No: NHN0319429, meter reads: 654 hours, Engine: FPT R753 2.2 L turbocharged, HP: 70, Transmission: synchronized shuttle with 8 forward and 8 reverse gears, Drive: 4x4, Rear PTO: Yes, 3 Point Hitch: Yes, LOW HOUR machine! Excellent Condition! Contact Myron Nissley with any questions 574-536-2481. Location: 153 Broadford Road, Munfordville, KY 42765

5575
Miller Pro Hay Inverter
Model: 9714 Hay Buddy, hydraulic driven, in good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 416 McQuaid Road, Wooster, OH 44691

5452
2007 Volvo Semi Truck
VIN: 4V4KC9EJX8NZ66926
Meter reads: 385,219
Engine: VTC D13 (SN: 50692207)
Transmission: 13 speed, FUL RTLO-16913A (SN: 50692207)
GVWR: 53,220 lb
Front axle rating: 13,220 lb
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: Yes

Features and Notes: 11R24.5 tires, adjustable 5th wheel coupling. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5600
Frick 3 Head Block Carriage
3 HB, hydraulic Frick setworks, 12V/hydraulic, air dogs and (2) air log turners, no scanner, carriage measures 80" wide x 12' long, 38" center to center of track, comes with 45' of track and hydraulic carriage drive. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5601
3 Headblock Corley Carriage, Track, and Frame
17‘ x 7‘ carriage, 50 foot track, air dogs on heads with electric set works. Includes controls and pantograph. No drive, pulley or cable. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5602
Husk Frame
52” x 8’6 husk, 66” x 25” off bear conveyor, 14 inch belt, no drive for hush or conveyor. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5603
Metal Cab
4‘ x 4‘ x 7‘ cab, wooden door, a/c unit. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5604
Information Lot
Here is an opportunity to purchase a Pendu Saw System. Located at 1321 Fairlane Dr, Vanceburg, KY 41179. The lots will be offered individually as well as an entirety at the end of the auction with a 10% Raise. Contact Eugene with any questions 574-242-1100

5605
3 Strand Cant Deck
LOT # 5609 SELLS FIRST (1st of an entirety) 8‘ x 161“ x 3‘, 5 foot from side to center, 32 inches from opposite side to center, 15 HP electric Drive, 14” x 88” cant slide pan. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5606
2 Strand Descrambler
LOT # 5609 SELLS FIRST (Part of an entirety) Electric Drive, 9‘ x 6‘ x 45“ overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5607
Pendu Infeed Roll case
LOT 5609 SELLS FIRST (Part of an entirety) 4“ x 14“ rolls, 15 inch roll spacing, includes cant sensors, hydraulic cylinder on cant turner, no Drive included, 20‘ x 26“ x 37“ or all size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5608
Pendu 2400 Chop Saw
THIS LOT SELLS AFTER LOT # 5609 (Part of an entirety) 24 inch blade, 20 HP electric drive, hydraulic cylinder powers swing arm, hydraulic cylinders on for adjustable board stops, waste kicker, no in feed, 15’ x 26” x 37” out feed rolls hydraulic drive, 4“ x 14“ rolls, 20 inch dust blower with 7.5 Hp electric drive and 6 inch out feed. Includes controls for roll case, swing arm, hydraulic cylinders, and edger. Model 2400, SN: 9908, manufactured in 1999. Seen minimal use (approx. 2 years total). 15‘ x 7‘ x 9‘ overall size.63“ x 63“ x 9‘ wooden cab. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5609
Pendu 4300 Gang Saw
THIS LOT SELLS FIRST BEFORE LOT # 5605 (Part of an entirety) 30 Hp electric drive on sizer head, sizer has indexable teeth, 75HP electric drive on each saw shaft, hydraulic drive on in feed press down rolls, automatic oiling system on saw shaft bearings, 12 inch wide capacity, 8 foot underbelly auger feeds 20 inch blower with 10 inch outfeed, additional 20 inch blower vacuum with 20 HP electric drive to and 10 inch outfeed. includes breaker box and 20 feet of 9 inch dust pipe. Seen minimal use (approx. 2 years total) has original feed rolls. Model M4300N serial number 9909. manufactured in 1999. 12‘ x 6‘ x 9‘ overall size. NICE UNIT!! Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5610
Belt Conveyor
(Part of an entirety) 9‘ x 18“ x 3‘, 11 inch rubber conveyor belt, no drive. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5611
Hydraulic Pack
(Part of an entirety) 48“ x 27“ x 14“ tank, 30 HP electric drive, feed hydraulics to swing arm saw and gang edger, 48” x 27 x 58” overall size. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5612
Pendu Saw System Entirety Lot of 5604 - 5611
With 10% raise. Rare opportunity to purchase lightly used Pendu equipment. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5613
Meadows Mill
Second owner mill! Includes carriage, track, carriage drive, off feed skate rolls, and mandrel shaft. Mandrel shaft powers the husk and the carriage Drive, no electric Drive for mandrel shaft is included. Reckart carriage drive replaced original drive and has seen minimal use. Manual dogs. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179

5650
1996 Viking Champion 304A Pallet Nailer
SN: 745C, air/hydraulic/24V, nail bowl is 110V, 4 stringer, 72" x 60" pallet capacity, right hand operation, new chains on carriage, upgraded to heavy duty tubing, includes Viking hydraulic stacker and rollcase, comes with new Vicker's hydraulic pump, operating daily and runs very well! One owner machine! Seller is offering free delivery up to 500 miles of equipment location. Contact Myron Nissley with any questions 574-536-2481. Location: 211 Sawmill Lane, Martinsburg, PA 16662

5651
Pendu Stake Pointer
2006 Pendu Model 3800, SN: 0604-8962, 24"-8' long x 3/4" up to 2" stake capacity, air clamping system, just came out of production, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 953 Schuyler Road, Turbotville, PA 17772

5652
Pallet Chief Nailer and Stacker
Currently disassembled, includes chains, air cylinders, air lines, and electricals, fits 50"wide pallets, can stack up to 10, 3 hailing heads, nail guns not included, listed as parts, machine 1463"x6' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5675
2 Head - Brewco High Speed Band Wolf ReSaw B800
Brand new resaw - never been used. Cutting capacity - 8” wide x 9” tall,Bands - 2” wide x 20’4” long, Power - 40 HP electric drive, Drive wheels - 40” precision cast wheels, Feed system and power - Variable speed hydraulic feed, Hold down system - Hydraulic top powered front and rear hold downs Guides - Roller guide with Patented Patented floating guide, Cut adjustment- Air lift system with color coded thickness spacers with micro-adjustments Blade tensioning system - Automatic air tensioning on blade, Weight - 5,000 lbs. per head, Dust removal- 6” diameter outlet, Does not come with hydraulic unit. Heads can be used individually. Contact Lester with any questions 812-787-3862. Location: 1700 US HWY 41 S, Sebree, KY 42455

 

5676
Metal Works 6 Head Resaw
6" infeed, Hyd motors on press rolls, currently disassembled, motors not included, 334"x 1" recrowned wheels, includes all electricals, pulleys, belts, and 92"x8" angled conveyor no drive, 40'x8X 7' overall size. Contact Eugene with any questions 574-242-1100. Location: 308 Sloan Fork Road, Liberty, KY 42539

5677
2018 Wood-Mizer HR120 Resaw
SN: 04190000, 17 hp Kohler diesel engine, meter reads 755 hours, 19" band wheels, 12" thick x 16" wide capacity, machine overall measures approx. 78" long x 72" wide x 85" high, comes with approx. 15 new and 12 used 1 1/4" blades, includes a powered return system. Like new condition! Contact Myron Nissley with any questions 574-536-2481. Location: 219 Timoney Lake Road, Smyrna, ME, 04780

5700
Gang/Edger Combo
7" x 48" capacity, (7) 24" blades, 2 blades are movable on edger side, edger side measures 20" gang side measures 14" wide, 3 15/16" arbor,  hydraulic feed motor, spacers, comes with dual tailing belts, no belt, extendable arm for switch panel, no power drive, (14)-24’’ blades most of the blades have been retipped, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 332 Oakdale Road, Salisbury, PA 15558

5701
Reckart R642 Edger
Serial No: 095, 6" thick x 42" wide cut capacity, 42" x 10' roll case infeed, (3) 20" blades - 2 are movable, 2 7/8" arbor, 50HP electric motor drive, no lasers, comes with 16' tailing arms and belt, approx. 9 resharpened blades, just came out of production and replaced with a new machine, good condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1321 Clymer Sherman Road, Clymer, NY 14724

 

5702
Three Blade Edger
Two moving blades, one stationary. Drive not included. Contact Eugene with any questions 574-242-1100. Location: 1321 Fairlane Dr, Vanceburg, KY 41179
 

5730
Fulghum 60" Chipper
Model: 60 6K, SN: FI-FIL-1246, 60" chipper, 6 knives, 19" x 27" horizontal infeed, top discharge, 15.5" diameter x 34" slab log capacity, no drive, recently repainted, 24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5750
3 Strand Log Deck
3 strand, 22' long x 9'7" wide x 48" high, gear box drive, electric motor optional, no stop'n'load. Contact Myron Nissley with any questions 574-536-2481. Location: 8485 Meroer Street, Pulaski, PA 16143

5751
3 Strand Log Deck
17' x 10' x 63", hydraulic drive, stop'n'load, Tulsa gear box  Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5752
Log Trough
3'x28' trough,  NEW 10,000 series Charlynn hydraulic motor, new hoses, drive sprockets and shaft, new 81HH chain  30' x 4' x 6' overall size. Heavy Duty! Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5753
Barn Sweep
40' x 4' and 21' x 4' section, occasionally holes cut for filling semi trailers. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5754
Barn Sweep
40' x 4' and 20' x 4' pan, no drive, additional 3' extension for catwalk. Contact Myron Nissley with any questions 574-536-2481. Location: 760 Fergusontown Road, Dawson Springs, KY 42408

5755
Webster Vibrating Conveyor
24" wide x 20' long x 10" deep, chipper infeed, no drive. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5756
Mellott 3 Strand Log Deck
10' wide x 15' long, sits on 10" I-Beam, (3) hydraulic dogs, no stop'n'load, tulsa winch gear box, hydraulic drive. has 2 new chains Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5757
2 Strand Log Deck
40" x 30' long, gear box, no drive, excellent condition. Contact Myron Nissley with any questions 574-536-2481. Location: 19250 Jaguar Trail, Bloomfield, IA 52537

5799
Information Lot
Lots 5800-5812 is a complete sprayer line with a 48'' capacity and will be offered as an entirety. Lots 5814-5821 is a 60'' capacity sprayer line that does not have a sprayer or a dryer and will also be offered as an entirety with a 10% raise. Lots 5800-5828 are all located at 17090 SR 120, Bristol IN 46507. Call Bronson with any questions 574-210-3721.  

5800
Heeseman Finish Sander
(1st of an entirety) SN: 9711061 Model: LSM8, Dual 54 inch sanding belts, and 54 inch rubber in feed and out feed seatbelt, 10’ x 8’ x 8’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5801
Celfa 10’ Automatic Panel Flipper
(Part of an entirety) Includes 15‘ x 5‘ rubber roll in feed and out feed. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5802
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5803
Rubber Belt Conveyor
(Part of an entirety)197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5804
Rubber Belt Conveyor
(Part of an entirety) 197” x 62” x 3’, 54 inch rubber belt with built-in vacuum dust collection system, and includes 3’ rubber roll draw deck. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5805
Sorbini 72" Brush Cleaning Unit
(Part of an entirety) 10" diameter brush and stand, 92” x 22” x 55” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5806
Rubber Belt Conveyor
(Part of an entirety) 18‘ x 85“ x 35“, 47 inch belt conveyor, electric drive. Does not include contents on top of conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5807
Rubber Roll Cases
(Part of an entirety) 156“ x 56“ x 37“ roll case, electric Drive, rubber rolls, 3 1/4 inch rolls, 5 inch spacing, 13’ x 62“ x 37“ roll case, electric Drive, rubber rolls, 2 1/2 inch rolls, 4 1/4 inch spacing, includes infrared scanner, 51“ x 62“ x 37“ rubber roll case, electric drive includes infrared scanner 40“ x 62“ x 37“ rubber roll case electric Drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5808
Celfa 48" Pass Through Oven
(Part of an entirety) Model: Feveu2/6ti 10000 SN: 06235/10, 34’ x 6’ x 6’ overall size, includes hot water heat exchanger, and 42 inch blower. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5809
Celfa Six Layer Stacking Dry Oven
(Part of an entirety) SN: 06235/08, Model: PF2VL6 7500, 72" x 25' x 92" overall size, includes insulation, panels, and parts, does not include heater. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5810
Heesemann 48" Cleaner/Duster
(Part of an entirety) SN: 9711071 Model: Ea-4, 44“ x 88“ x 62“ overall size, electric Drive, includes control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5811
Celfa Eco Sprayer
(Part of an entirety) Model: Roc3/D, SN: 11079/4, Two arm, four nozzle, clear and topcoat reciprocating spray unit, missing one glass door, includes air filtration unit. 62“ x 10‘ interior conveyor, 7‘ x 5‘ out feed conveyor, 12’ x 13’ 6 x 10’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5812
Bryan Flexible Tube Boiler
(Part of an entirety) Model: CL-240-W-Gi, SN: 971292, natural gas, includes 15 hp electric water pump, 92” x 36” x 54” overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5813
Entirety of lots 5800-5812
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5814
Sorbini Three Head Panel Cleaner/Duster
(1st of an entirety) Model: VS–34–ACT, SN: MP35T029287, 60 inch capacity, 112" x 6‘ x 66" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5815
Celfa Automatic Panel Flipper
(Part of an entirety) Model: Trarib-3500/4250, SN: 09121/02, Includes 13’x69"x35" roll case w/ pop up transfer in feed and out feed, 13‘ x 69“ x 35“ rubber roll case, and 8‘ x 2‘ x 7‘ control panel. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5816
Rubber Roll Cases
(Part of an entirety) 8‘ x 77” x 36“ electric drive, 75“ x 77“ x 35“ electric drive, 187“ x 77“ x 35“ electric drive, 4’ x 5’ x 3’ skate rolls. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5817
Rubber Conveyor
(Part of an entirety) 12’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5818
Rubber Conveyor
(Part of an entirety) 20’ x 77” x 35” electric drive, 65 inch wide rubber conveyor. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5819
Sorbini for Head Brush and Polish Unit
(Part of an entirety) SN: MT480029288, Model: VS/26–40, 65“ x 13’ foot dust vacuum conveyor, 10 inch diameter, dusting heads, 10‘ x 11‘ x 6‘ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5820
Blowers
(Part of an entirety) 2 - 20 inch blowers, 9 inches in feed 10 inch out feed, electric drive. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5821
Fulton Vantage Natural Gas Boiler
(Part of an entirety) Model: VTG–3000, SN: 6499, Includes 15 HP electric water pump. 10’ x 3’ x 7’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5822
Entirety of lots 5814-5821
With 10% raise. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5823
Safety, Cages, and Catwalks
3 bridges 7' x 4" tall clearance. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5824
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5825
Jefferson Electric Transformer
Three phase, 60 Hz in a, 480 delta high voltage. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5826
Sanding Belt Racks
6' x 5' x 68" overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5827
IMA Klessmann Band Edger
Type: ADVANTAGE/5620 Kom.Nr: 02156, 1" max capacity thickness, 23’ x 5’ x 6’ overall size. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5828
Rubber Belt Conveyor
62“ x 13‘ x 35“ overall size, electric drive, includes all contents, barrel mixers/pumps, air hoses. Contact Bronson with any questions 574-210-3721. Location: 17090 SR 120, Bristol, IN 46507

5829
2009 Keystone Stake Pointer
Model: 972, SN: BAK2X612047, 3/4" to 2" capacity, powered by 5 hp Toshiba - 3,500 rpm electric motor, lightly used, great condition! Contact Myron Nissley with any questions 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

5830
Red-D-Ark by Miller Portable Diesel Welder
Model: D502K 5+4, SN: LC443280, Kubota V3300-B 49 hp Liquid-cooled diesel engine, meter reads: 6455 hours, DC Amperage Range: 20-600 A, auxiliary power: 4000 KW 120/240 VAC, three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8" carbons. Processes: stick, MIG, DC-TIG, Flux-Cored Welding and Air Carbon Arc Gouging, dimensions: 50"H, 30.75"W, 69.5"L, Weight: 1808 lb., Calibrated 1-29-2020, excellent operating condition. Contact Myron Nissley with any questions 574-536-2481. Location: 1559 State Hwy 32, Sullivan, IL 61951

5850
CAT D333 Genset
Make: Caterpillar, Model: D333, Serial No: 58B2754, 195 HP diesel, meter reads 1131 hours, 125 KW, 3 phase, 120/208 volts, 400 amp max, runs good. Contact Myron Nissley with any questions 574-536-2481. Location: 498 Miller Lane, Morgantown, KY 42261

5900
1 Semi Load Wooden Posts
20 posts per bundle of 8”-10”x8’ and 9 bundles, 100 posts per bundle of 2.5”-3.5”x 7’. Pressure Treated with CCA. Contact Lester with any questions 812-787-3862. Location: 11029 SR 132 E, Sebree, KY 42455
 

5901
2014 Caterpillar Mulcher Attachment
Model: HM415B, SN: HMB00305, high flow head, quick attach plate, 3 hose hydraulic hook up, brush control arm, 5' cutting head, rated to take down trees up to 8" in diameter. Good operating condition
Contact Myron Nissley with any questions 574-536-2481. Location: N15504 County Road O, Thorpe, WI 54771

5902
LA-Mar Log Grapple/Winch Skid-Steer
Model: 0026, heavy duty, 18000 lb hydraulic pierce winch, 36" log capacity, like new! Contact Myron Nissley with any question 574-536-2481. Location: 1271 Evergreen Road, Falkville, AL 35622

10000

10001

10002

10003

10004

10005

10006

10007

10008

10009

10010

10011

10012

10013

10014

10015

10016

10017

10018

10019

10020

10021

10022

10023

10024

10025

10026

10027

10028

10029

10030

10031

10032

10033

10034

10035

10036

10037

10038

10039