Sapp Machinery Auction Sept 11, 2025
Listing ID#: 809722

Sale Location

Buffalo Center, IA 50424
Sale Dates and TimesSALE IS COMPLETED
Monday Sep 1, 2025 Completed
Thursday Sep 11, 2025 Completed
Sale Type
   Live with Online Auction  VIEW ONLINE CATALOG
Company Information
Hallberg Auction LLC

Contact: Jason Hallberg
Phone: 1-800-373-2255
Email: info@hallbergauction.com
Website: www.hallbergauction.com

EstateSale.com ID#: 9117
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
TERMS & CONDITIONS
BY PLACING A BID, BIDDER CERTIFIES THAT THEY HAVE READ AND WILL ABIDE BY ALL TERMS AND CONDITIONS AS STATED BELOW. IT IS THE BUYER'S RESPONSIBILITY TO UNDERSTAND ALL THE TERMS AND CONDITIONS PRIOR TO BIDDING.

All items are sold "AS IS, WHERE IS" with no warranty or guarantees, expressed or implied, by the seller or Hallberg Auction. Bidders accept all auction items/property "WITH ALL FAULTS", whether or not immediately apparent. It is strongly recommended that bidders thoroughly inspect items before placing a bid. Items are described as accurately as possible, but do not represent any guarantee by the seller or Hallberg Auction. By placing a bid, bidder signifies that they have inspected the item to their satisfaction.
By placing a bid, the bidder is entering into a contractual agreement to purchase the item(s) from the seller. Failure to follow through with payment and pickup of items could result in legal collection proceedings.

Pictures and Item Descriptions
Multiple photos will be included in item descriptions whenever possible; however, photos may or may not fully represent the item. Lighting, surroundings and other factors can affect the perception of an item in a photo; therefore, all bidders are responsible for their own personal inspection of the item(s) before placing a bid. Photos and descriptions are to be used as a guideline only.

Odometer, Mileage & Hour Meter readings are assumed to be correct. These assumptions do not constitute a guarantee. It is up to the bidder to validate the accuracy of the reading during the inspection process. Hallberg Auction is not liable for any inaccuracies pertaining to odometer, mileage and hour meter readings.

Auction Software
Hallberg Auction will not be held liable for any software or software malfunction discrepancies.

Invoicing
An invoice and payment instructions will be sent to each buyers registered email at the close of the auction. Please read email message completely for payment instructions. Please contact us at (800) 373-2255 if you do not receive an invoice from us within 24 hours of auction close.

Payment
Successful bidders must contact Hallberg Auction within 24 hours after receiving their invoice to confirm their method of payment.

Payment must be received within 7 days after the conclusion of the auction.

If payment is not received or payment arrangements made within 7 days after the conclusion of the auction, the buyer will lose all right, title and interest to the item(s), including any and all moneys.

Auction items will not be released for pickup until payment is made in full. Failure to comply with these terms will prohibit bidder from participating in future live or on-line auctions conducted by Hallberg Auction.

Item Pickup
Removal and/or transportation of item(s) won on auction shall be at the expense, liability and risk of the buyer. Any Items not removed within 3 weeks of the conclusion of the auction, unless arrangements have been made and agreed upon by seller, will be considered abandoned and the purchaser will lose all right, title and interest to the property, including any and all moneys from the buyer.

Returned Check Fees
A fee of $35.00 will be assessed on returned checks and may result in the bidder being denied access to future auctions. Be sure you are capable of paying immediately after the conclusion of the auction and realize your bids are not conditional upon financing.

Payment Procedures
Payments will be made to Hallberg Auction.
Forms of payment: Company/Personal Check, Cash, or Credit Card (with a 4.0% convenience fee for use of a credit card).
All Checks are to be made payable to Hallberg Auction
Mail checks to:
2409 Hwy 9
Buffalo Center, IA 50424
*Please include your bidder number in the memo line
If paying by credit card, please call our office at 800-373-2255 with your credit card information.
We accept Master Card, Visa, American Express and Discover.
There is a 4.0% convenience fee per transaction for all credit card purchases.

Titles
Titles will be sent via standard mail 7 days after payment has been received, unless otherwise specified in the description of the item, and will be mailed to the address provided by bidder upon registration.

Reserve Bidding
Items on auction may have an undisclosed reserve. Sellers, Hallberg Auction, or other agent of seller may bid on items up to reserve amount in order to aid in the sale of the item.
*By placing a bid, bidder signifies that they have inspected items to their satisfaction.
*Hallberg Auction reserves the right to remove any property prior to close of the auction.
*Hallberg Auction reserves the right to reject any bid at our discretion.
*Bidders who register at any of our auctions will be included in our mailing lists to receive print or digital communication regarding upcoming auctions. Your information will not be sold to third parties and you may opt out of receiving notices at any time.

Item Descriptions are for Identification purposes; they constitute no warranties expressed or implied. You are encouraged to make your own in-person inspection of all property before bidding.

Listing Information
Two Day Sapp Machinery Auction 2409 Highway 9, Buffalo Center, Iowa Wednesday, September 10th 5:00 pm Online Only Vehicles, Trailers, Mowers, Boats and ATVs Auction to include: Passenger vehicles, Enclosed Trailers, Light Trailers, Riding Lawn Mowers (running), Boats, Campers, ATVs/UTVs/Side-by-Sides. Consignments will be taken Tuesday, August 26 through Friday, September 5th (excluding Sunday 1st) 9:00 am - 5:00 pm. Thursday September 11th at 10:00 am Live Machinery Auction with Online Bidding Available Auction to include: Tractors, Combines and Harvest Equipment, Tillage Equipment, Semis, Grain Trailers, Gravity Wagons and Grain Carts, Transportable Augers, New Hay Racks and other Equipment. Consignments will be taken Tuesday, August 26th through Friday, September 5th (excluding Sunday and September 1) 9:00 am - 5:00 pm. NO SMALL LINE FOR SEPTEMBER 2025 AUCTION To consign call Hallberg Auction 800-373-2255 www.hallbergauction.com

3
Loftness Stalk Chopper 6 row, 16'
Model180SH54P244G Serial # 02-1146, small 1000 pto hydraulic lift good paint, good hammers

4
1949 Farmall M (Runs and Drives)
Has been shedded, Good Rubber, Power Steering (needs new gasket on reservoir ) straight metal, SN: 182404

5
Allis Chalmers 185 Diesel (Runs and Drives)
Serial # 2880 Drove in Tractor Ride this summer, Good Auger Tractor, 2 Hydraulics, 540 PTO

6
1951 B John Deere Runs and Drives
new tires, new motor Electric Start, Straight Metal

7
1959 550 Oliver Tractor w/3pt Runs and Drives
Serial # 73145-519 4413.6 Hours

7
Ford 216 3pt Plow
IOI 10-455, Serial # 1694


9
1968 International 656 Hydro w/ WL 21 Loader (gas)
Tire Chains All Season Cab (no heat) Runs and Drives, Engine rebuilt at 1900 hours by Red Power. shows 2015 on Tach Serial # 34898, 15.5 - 38 Rubber

10
Massey Fergusen 1135 Perkins Diesel
New Clutch 2 yrs ago, Runs and Drives, shows 3702 hours, Tires 18.4-38, 11.00-16 1000 PTO, 2 hyd.


12
1940 John Deere B (non-running)
Serial # B89378 Looks Good, Loose Last used 3 years ago.

13
Tebben 3 pt. Ripper 7 Shank
24" Spacing Double Frame Leveler

14
Parker 5500 Wagon
Side dump, Brakes, 445/65R 22.5 Super Single Truck Tires

15
550 Year Round Gravity Box
21.5L-16.1 Flotation Tires Center and Side Dump (real good condition) Green and Yellow, Brakes

16
Rhino 173 3pt rotary mower 72", Nice
540 PTO, Deflector Chains,






22



25
Massey Ferguson Sileage Chopper
on board knife electric sharpener Used 2 months ago

26
Hiniker AR2000 Stalk Cutter 8 Row
Large 1000 PTO Hydraulic Lift






32
'62 Farmall 340 Gas Tractor Runs & Drives Good
manuals in office 1388 hours Serial # 7566

33
1979 Leyland 154 Runs and Drives Good
3pt, PTO, 25 HP, 1 New Rear Tire Shows 2962 hours Serial # 54P/301175/Z 12557, Manual in Office

34
Case 1835B Diesel Skidloader Runs Good
Quick Attach Bucket 4268 Hours

35
Parker 350 bu Wagon on Parker Gear
Brakes Good 16.5-16.1 Rubber

36
Vermeer PT12 Tile Trencher
used 3 years ago (needs work) cable winch, 540 PTO



40
Loftness 3pt. Stalk Chopper
Large 1000 PTO Hydraulic LIft







53
Parker 2600 Wagon with Parker Gear
400 bushel, 16.5-16.1 tires, Single door



56
450 bu Double Door Wagon with Brakes
Knowles gear 16.5-16.1 Tires




61
International 485 Disk 24' 9" spacing
Front 21.5" gang notched blades, Hydraulic Fold, and tote of scrapers by disk

62
Brent 550 Gravity Wagon
445-65-22.5 Super Singles, Brakes, Single door, Lights

63
Killbros 550 Gravity Wagon on Killbros Gear
445-65-22.5 Super Sings, Single Door, Lights, Brakes

64
Case IH 6500 11 Shank Disc Chisel
Model 6500CONT 0190000 Serial ID JAG 0012824 13.5' 15' Spacing 19.5" Blades



68
John Deere 327 15' Stalk Chopper (works well)
small 1000 PTO, hydraulic lift








78
New Holland TR96 Combine
new solenoid 3836 Engine Hours 30.5-32, Ag Leader PF3000

79
New Holland Corn Head
6 Row 30" Spacing Poly Dividers


81
John Deere 960 Field Cultivator 32'
Knock on sweeps, 3 bar harrow


83
John Deere Rock Disk 26.5' 9" spacing
Hydraulic Fold, 19" front 20" Rear

84
New Idea 3732 Tandem Manure Spreader
Poly floor liner, slop gate

85
John Deere 2700 Ripper 19" blades
Wheel bearings repacked, Replaced disc bearings last year

86
New Idea Ground Driven Manure Spreader
Repainted, Good Floor, New Tires Never been used for intended purpose. Used in Parades



89
Unverferth Zone Builder 4 Shank Ripper 30"
w/complete fifth shank and disc

91
John Deere Mower Conditioner 9' Cut Crimper
Extra blades and bolts in Office


93
'95 Bobcat 742B Skidloader
Fully Serviced, Runs



96
Case IH 260 Magnum
3578 Hours, Front Duals, Suspended Cab, 4 SCV Remotes, Large Hydraulic Pump, 372 Receiver, Auto Steer,



99
Case IH 1660 Combine
4700 hours, after market chopper


101
Case IH 1020 Bean Head 22 1/2'
Crary Air Reel (control in office)

103
'04 John Deere 9860 STS
4092 Engine Hours 1879 Seperator Hours, 4 New Tires, 520/85-R38, 600/65-28, Rear Wheel Assist, Contour Master, New Batteries, Fuel Gauge says low fuel even when full Manual in Office

104
'03 John Deere 1293 Corn Head
Header Height Control PTO Shaft Drive


106
John Deere 635F Bean Platform
Full Finger Auger PTO Shaft Drive


108
Case 7088 Axial Flow Combine
Tach has been changed approximate 3350 hours 480/80R42 Drives, 18.4-26 Steers

109
John Deere 9400 Combine
3414 engine hours, 2370 Separator Hours 24.5-32 Drives 14.9-24 Steers, Chaff Spreader

110
John Deere 643 Corn Head
Poly Center Snouts,, Steel Outer



114


116
'91 Kenworth T600 20' x 96" Scott Box
VIN 1XKAD29X6MJ557939, 350 Cummins Engine, 9 Speed Transmission, Air Ride, Twin Screw, Roll Tarp 22.5 Rubber , Jake Brake, Air Operated PTO, Rear Hitch for Pup Trailer



119
Case IH 2020 Bean Platform 35"
Full Finger Auger, Crary Air Reel


121
'96 John Deere 9600 Combine
4414 motor hours/ 2928 on separator hours, Rear Wheel Assist, Bin Extensions, head sells next lot Serial # H09600X666651 Ag Leader PF Monitor, Headsight, Chaff Spreader, 18.4.-38, 18.4-26 Manual in Office

122
John Deere 893 Corn Head
8 row , corn catcher

123
John Deere 630F Bean Head 30'
Hydra Flex, Full Finger Auger, Single Point PTO Shaft


125
'95 Polar tanker 40' 9000 Gallon
4 compartments, clean, Nice pump & fittings, Fill from top or bottom, Everything works, 90% Rubber 90% Brakes, Air Suspension, Tall 22.5 Rubber

126
'13 Great Dane 28' Dry Van Trailer
VIN:1GRAA5612DB7107 Set Back Dollies, 40% Rubber 80% Brakes E-z Roll Up Door, Menator Tire Air System


128
John Deere 930 F Flex Head
Single Point Hookup, Full Finger Auger, PTO Shaft Drive



131
Homemade Head Trailer
(Fits 6 row corn head 20' bean head



134
Alloway GS15 10" x 60' Auger
540 PTO, Manual Lift


136
Westfield MK100-71 Auger
Sing Hopper 540 PTO Hydraulic Lift


138
DMI Ecolo Tiger 530 B Disk Ripper
5 shank 30' spacing, New Points,21 .5 - 22" Blades, Shank Guards, Leveler

139
International 485 Disk 20'
Hydraulic Fold, 19" Blade

140

141
Cat Challenger 65D Serial # 2ZJ02134
8359 Hours Guidance System, Serial # 2ZJ02134


143


145

146
Killbros 500 bu Wagon
killbros gear, 16/5-16.1 Tires, Brakes

147

148


150
Parker 510 Grain Cart
Gear Built Rebuilt, 23.1-26, Corner Auger, Small 1000 PTO



153
'85 Allis Chalmers 8070 Runs and Drives
Front wheel assist, Power Shift, w/duals, full set of weights on front, using breath of ether to start, Second tach actual hours unknown, Manual In Office







Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Sapp Machinery Auction Sept 11, 2025

Hallberg Auction LLC

Hallberg Auction LLC


Contact: Jason Hallberg
Phone: 1-800-373-2255
Sale Location
2409 Highway 9
Buffalo Center, IA 50424
Sale Dates and Times
Monday Sep 1, 2025 Completed
Thursday Sep 11, 2025 Completed
Sale Terms and Conditions
TERMS & CONDITIONS BY PLACING A BID, BIDDER CERTIFIES THAT THEY HAVE READ AND WILL ABIDE BY ALL TERMS AND CONDITIONS AS STATED BELOW. IT IS THE BUYER'S RESPONSIBILITY TO UNDERSTAND ALL THE TERMS AND CONDITIONS PRIOR TO BIDDING. All items are sold "AS IS, WHERE IS" with no warranty or guarantees, expressed or implied, by the seller or Hallberg Auction. Bidders accept all auction items/property "WITH ALL FAULTS", whether or not immediately apparent. It is strongly recommended that bidders thoroughly inspect items before placing a bid. Items are described as accurately as possible, but do not represent any guarantee by the seller or Hallberg Auction. By placing a bid, bidder signifies that they have inspected the item to their satisfaction. By placing a bid, the bidder is entering into a contractual agreement to purchase the item(s) from the seller. Failure to follow through with payment and pickup of items could result in legal collection proceedings. Pictures and Item Descriptions Multiple photos will be included in item descriptions whenever possible; however, photos may or may not fully represent the item. Lighting, surroundings and other factors can affect the perception of an item in a photo; therefore, all bidders are responsible for their own personal inspection of the item(s) before placing a bid. Photos and descriptions are to be used as a guideline only. Odometer, Mileage & Hour Meter readings are assumed to be correct. These assumptions do not constitute a guarantee. It is up to the bidder to validate the accuracy of the reading during the inspection process. Hallberg Auction is not liable for any inaccuracies pertaining to odometer, mileage and hour meter readings. Auction Software Hallberg Auction will not be held liable for any software or software malfunction discrepancies. Invoicing An invoice and payment instructions will be sent to each buyers registered email at the close of the auction. Please read email message completely for payment instructions. Please contact us at (800) 373-2255 if you do not receive an invoice from us within 24 hours of auction close. Payment Successful bidders must contact Hallberg Auction within 24 hours after receiving their invoice to confirm their method of payment. Payment must be received within 7 days after the conclusion of the auction. If payment is not received or payment arrangements made within 7 days after the conclusion of the auction, the buyer will lose all right, title and interest to the item(s), including any and all moneys. Auction items will not be released for pickup until payment is made in full. Failure to comply with these terms will prohibit bidder from participating in future live or on-line auctions conducted by Hallberg Auction. Item Pickup Removal and/or transportation of item(s) won on auction shall be at the expense, liability and risk of the buyer. Any Items not removed within 3 weeks of the conclusion of the auction, unless arrangements have been made and agreed upon by seller, will be considered abandoned and the purchaser will lose all right, title and interest to the property, including any and all moneys from the buyer. Returned Check Fees A fee of $35.00 will be assessed on returned checks and may result in the bidder being denied access to future auctions. Be sure you are capable of paying immediately after the conclusion of the auction and realize your bids are not conditional upon financing. Payment Procedures Payments will be made to Hallberg Auction. Forms of payment: Company/Personal Check, Cash, or Credit Card (with a 4.0% convenience fee for use of a credit card). All Checks are to be made payable to Hallberg Auction Mail checks to: 2409 Hwy 9 Buffalo Center, IA 50424 *Please include your bidder number in the memo line If paying by credit card, please call our office at 800-373-2255 with your credit card information. We accept Master Card, Visa, American Express and Discover. There is a 4.0% convenience fee per transaction for all credit card purchases. Titles Titles will be sent via standard mail 7 days after payment has been received, unless otherwise specified in the description of the item, and will be mailed to the address provided by bidder upon registration. Reserve Bidding Items on auction may have an undisclosed reserve. Sellers, Hallberg Auction, or other agent of seller may bid on items up to reserve amount in order to aid in the sale of the item. *By placing a bid, bidder signifies that they have inspected items to their satisfaction. *Hallberg Auction reserves the right to remove any property prior to close of the auction. *Hallberg Auction reserves the right to reject any bid at our discretion. *Bidders who register at any of our auctions will be included in our mailing lists to receive print or digital communication regarding upcoming auctions. Your information will not be sold to third parties and you may opt out of receiving notices at any time. Item Descriptions are for Identification purposes; they constitute no warranties expressed or implied. You are encouraged to make your own in-person inspection of all property before bidding.
Listing Details
Two Day Sapp Machinery Auction 2409 Highway 9, Buffalo Center, Iowa Wednesday, September 10th 5:00 pm Online Only Vehicles, Trailers, Mowers, Boats and ATVs Auction to include: Passenger vehicles, Enclosed Trailers, Light Trailers, Riding Lawn Mowers (running), Boats, Campers, ATVs/UTVs/Side-by-Sides. Consignments will be taken Tuesday, August 26 through Friday, September 5th (excluding Sunday 1st) 9:00 am - 5:00 pm. Thursday September 11th at 10:00 am Live Machinery Auction with Online Bidding Available Auction to include: Tractors, Combines and Harvest Equipment, Tillage Equipment, Semis, Grain Trailers, Gravity Wagons and Grain Carts, Transportable Augers, New Hay Racks and other Equipment. Consignments will be taken Tuesday, August 26th through Friday, September 5th (excluding Sunday and September 1) 9:00 am - 5:00 pm. NO SMALL LINE FOR SEPTEMBER 2025 AUCTION To consign call Hallberg Auction 800-373-2255 www.hallbergauction.com

3
Loftness Stalk Chopper 6 row, 16'
Model180SH54P244G Serial # 02-1146, small 1000 pto hydraulic lift good paint, good hammers

4
1949 Farmall M (Runs and Drives)
Has been shedded, Good Rubber, Power Steering (needs new gasket on reservoir ) straight metal, SN: 182404

5
Allis Chalmers 185 Diesel (Runs and Drives)
Serial # 2880 Drove in Tractor Ride this summer, Good Auger Tractor, 2 Hydraulics, 540 PTO

6
1951 B John Deere Runs and Drives
new tires, new motor Electric Start, Straight Metal

7
1959 550 Oliver Tractor w/3pt Runs and Drives
Serial # 73145-519 4413.6 Hours

7
Ford 216 3pt Plow
IOI 10-455, Serial # 1694


9
1968 International 656 Hydro w/ WL 21 Loader (gas)
Tire Chains All Season Cab (no heat) Runs and Drives, Engine rebuilt at 1900 hours by Red Power. shows 2015 on Tach Serial # 34898, 15.5 - 38 Rubber

10
Massey Fergusen 1135 Perkins Diesel
New Clutch 2 yrs ago, Runs and Drives, shows 3702 hours, Tires 18.4-38, 11.00-16 1000 PTO, 2 hyd.


12
1940 John Deere B (non-running)
Serial # B89378 Looks Good, Loose Last used 3 years ago.

13
Tebben 3 pt. Ripper 7 Shank
24" Spacing Double Frame Leveler

14
Parker 5500 Wagon
Side dump, Brakes, 445/65R 22.5 Super Single Truck Tires

15
550 Year Round Gravity Box
21.5L-16.1 Flotation Tires Center and Side Dump (real good condition) Green and Yellow, Brakes

16
Rhino 173 3pt rotary mower 72", Nice
540 PTO, Deflector Chains,






22



25
Massey Ferguson Sileage Chopper
on board knife electric sharpener Used 2 months ago

26
Hiniker AR2000 Stalk Cutter 8 Row
Large 1000 PTO Hydraulic Lift






32
'62 Farmall 340 Gas Tractor Runs & Drives Good
manuals in office 1388 hours Serial # 7566

33
1979 Leyland 154 Runs and Drives Good
3pt, PTO, 25 HP, 1 New Rear Tire Shows 2962 hours Serial # 54P/301175/Z 12557, Manual in Office

34
Case 1835B Diesel Skidloader Runs Good
Quick Attach Bucket 4268 Hours

35
Parker 350 bu Wagon on Parker Gear
Brakes Good 16.5-16.1 Rubber

36
Vermeer PT12 Tile Trencher
used 3 years ago (needs work) cable winch, 540 PTO



40
Loftness 3pt. Stalk Chopper
Large 1000 PTO Hydraulic LIft







53
Parker 2600 Wagon with Parker Gear
400 bushel, 16.5-16.1 tires, Single door



56
450 bu Double Door Wagon with Brakes
Knowles gear 16.5-16.1 Tires




61
International 485 Disk 24' 9" spacing
Front 21.5" gang notched blades, Hydraulic Fold, and tote of scrapers by disk

62
Brent 550 Gravity Wagon
445-65-22.5 Super Singles, Brakes, Single door, Lights

63
Killbros 550 Gravity Wagon on Killbros Gear
445-65-22.5 Super Sings, Single Door, Lights, Brakes

64
Case IH 6500 11 Shank Disc Chisel
Model 6500CONT 0190000 Serial ID JAG 0012824 13.5' 15' Spacing 19.5" Blades



68
John Deere 327 15' Stalk Chopper (works well)
small 1000 PTO, hydraulic lift








78
New Holland TR96 Combine
new solenoid 3836 Engine Hours 30.5-32, Ag Leader PF3000

79
New Holland Corn Head
6 Row 30" Spacing Poly Dividers


81
John Deere 960 Field Cultivator 32'
Knock on sweeps, 3 bar harrow


83
John Deere Rock Disk 26.5' 9" spacing
Hydraulic Fold, 19" front 20" Rear

84
New Idea 3732 Tandem Manure Spreader
Poly floor liner, slop gate

85
John Deere 2700 Ripper 19" blades
Wheel bearings repacked, Replaced disc bearings last year

86
New Idea Ground Driven Manure Spreader
Repainted, Good Floor, New Tires Never been used for intended purpose. Used in Parades



89
Unverferth Zone Builder 4 Shank Ripper 30"
w/complete fifth shank and disc

91
John Deere Mower Conditioner 9' Cut Crimper
Extra blades and bolts in Office


93
'95 Bobcat 742B Skidloader
Fully Serviced, Runs



96
Case IH 260 Magnum
3578 Hours, Front Duals, Suspended Cab, 4 SCV Remotes, Large Hydraulic Pump, 372 Receiver, Auto Steer,



99
Case IH 1660 Combine
4700 hours, after market chopper


101
Case IH 1020 Bean Head 22 1/2'
Crary Air Reel (control in office)

103
'04 John Deere 9860 STS
4092 Engine Hours 1879 Seperator Hours, 4 New Tires, 520/85-R38, 600/65-28, Rear Wheel Assist, Contour Master, New Batteries, Fuel Gauge says low fuel even when full Manual in Office

104
'03 John Deere 1293 Corn Head
Header Height Control PTO Shaft Drive


106
John Deere 635F Bean Platform
Full Finger Auger PTO Shaft Drive


108
Case 7088 Axial Flow Combine
Tach has been changed approximate 3350 hours 480/80R42 Drives, 18.4-26 Steers

109
John Deere 9400 Combine
3414 engine hours, 2370 Separator Hours 24.5-32 Drives 14.9-24 Steers, Chaff Spreader

110
John Deere 643 Corn Head
Poly Center Snouts,, Steel Outer



114


116
'91 Kenworth T600 20' x 96" Scott Box
VIN 1XKAD29X6MJ557939, 350 Cummins Engine, 9 Speed Transmission, Air Ride, Twin Screw, Roll Tarp 22.5 Rubber , Jake Brake, Air Operated PTO, Rear Hitch for Pup Trailer



119
Case IH 2020 Bean Platform 35"
Full Finger Auger, Crary Air Reel


121
'96 John Deere 9600 Combine
4414 motor hours/ 2928 on separator hours, Rear Wheel Assist, Bin Extensions, head sells next lot Serial # H09600X666651 Ag Leader PF Monitor, Headsight, Chaff Spreader, 18.4.-38, 18.4-26 Manual in Office

122
John Deere 893 Corn Head
8 row , corn catcher

123
John Deere 630F Bean Head 30'
Hydra Flex, Full Finger Auger, Single Point PTO Shaft


125
'95 Polar tanker 40' 9000 Gallon
4 compartments, clean, Nice pump & fittings, Fill from top or bottom, Everything works, 90% Rubber 90% Brakes, Air Suspension, Tall 22.5 Rubber

126
'13 Great Dane 28' Dry Van Trailer
VIN:1GRAA5612DB7107 Set Back Dollies, 40% Rubber 80% Brakes E-z Roll Up Door, Menator Tire Air System


128
John Deere 930 F Flex Head
Single Point Hookup, Full Finger Auger, PTO Shaft Drive



131
Homemade Head Trailer
(Fits 6 row corn head 20' bean head



134
Alloway GS15 10" x 60' Auger
540 PTO, Manual Lift


136
Westfield MK100-71 Auger
Sing Hopper 540 PTO Hydraulic Lift


138
DMI Ecolo Tiger 530 B Disk Ripper
5 shank 30' spacing, New Points,21 .5 - 22" Blades, Shank Guards, Leveler

139
International 485 Disk 20'
Hydraulic Fold, 19" Blade

140

141
Cat Challenger 65D Serial # 2ZJ02134
8359 Hours Guidance System, Serial # 2ZJ02134


143


145

146
Killbros 500 bu Wagon
killbros gear, 16/5-16.1 Tires, Brakes

147

148


150
Parker 510 Grain Cart
Gear Built Rebuilt, 23.1-26, Corner Auger, Small 1000 PTO



153
'85 Allis Chalmers 8070 Runs and Drives
Front wheel assist, Power Shift, w/duals, full set of weights on front, using breath of ether to start, Second tach actual hours unknown, Manual In Office







Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Sapp Machinery Auction Sept 11, 2025
 Live Auction w/Online Bidding
Sale Date(s)
Monday Sep 1, 2025 Completed
Thursday Sep 11, 2025 Completed
Sale Location

Buffalo Center, IA 50424
Listing Terms and Conditions
TERMS & CONDITIONS BY PLACING A BID, BIDDER CERTIFIES THAT THEY HAVE READ AND WILL ABIDE BY ALL TERMS AND CONDITIONS AS STATED BELOW. IT IS THE BUYER'S RESPONSIBILITY TO UNDERSTAND ALL THE TERMS AND CONDITIONS PRIOR TO BIDDING. All items are sold "AS IS, WHERE IS" with no warranty or guarantees, expressed or implied, by the seller or Hallberg Auction. Bidders accept all auction items/property "WITH ALL FAULTS", whether or not immediately apparent. It is strongly recommended that bidders thoroughly inspect items before placing a bid. Items are described as accurately as possible, but do not represent any guarantee by the seller or Hallberg Auction. By placing a bid, bidder signifies that they have inspected the item to their satisfaction. By placing a bid, the bidder is entering into a contractual agreement to purchase the item(s) from the seller. Failure to follow through with payment and pickup of items could result in legal collection proceedings. Pictures and Item Descriptions Multiple photos will be included in item descriptions whenever possible; however, photos may or may not fully represent the item. Lighting, surroundings and other factors can affect the perception of an item in a photo; therefore, all bidders are responsible for their own personal inspection of the item(s) before placing a bid. Photos and descriptions are to be used as a guideline only. Odometer, Mileage & Hour Meter readings are assumed to be correct. These assumptions do not constitute a guarantee. It is up to the bidder to validate the accuracy of the reading during the inspection process. Hallberg Auction is not liable for any inaccuracies pertaining to odometer, mileage and hour meter readings. Auction Software Hallberg Auction will not be held liable for any software or software malfunction discrepancies. Invoicing An invoice and payment instructions will be sent to each buyers registered email at the close of the auction. Please read email message completely for payment instructions. Please contact us at (800) 373-2255 if you do not receive an invoice from us within 24 hours of auction close. Payment Successful bidders must contact Hallberg Auction within 24 hours after receiving their invoice to confirm their method of payment. Payment must be received within 7 days after the conclusion of the auction. If payment is not received or payment arrangements made within 7 days after the conclusion of the auction, the buyer will lose all right, title and interest to the item(s), including any and all moneys. Auction items will not be released for pickup until payment is made in full. Failure to comply with these terms will prohibit bidder from participating in future live or on-line auctions conducted by Hallberg Auction. Item Pickup Removal and/or transportation of item(s) won on auction shall be at the expense, liability and risk of the buyer. Any Items not removed within 3 weeks of the conclusion of the auction, unless arrangements have been made and agreed upon by seller, will be considered abandoned and the purchaser will lose all right, title and interest to the property, including any and all moneys from the buyer. Returned Check Fees A fee of $35.00 will be assessed on returned checks and may result in the bidder being denied access to future auctions. Be sure you are capable of paying immediately after the conclusion of the auction and realize your bids are not conditional upon financing. Payment Procedures Payments will be made to Hallberg Auction. Forms of payment: Company/Personal Check, Cash, or Credit Card (with a 4.0% convenience fee for use of a credit card). All Checks are to be made payable to Hallberg Auction Mail checks to: 2409 Hwy 9 Buffalo Center, IA 50424 *Please include your bidder number in the memo line If paying by credit card, please call our office at 800-373-2255 with your credit card information. We accept Master Card, Visa, American Express and Discover. There is a 4.0% convenience fee per transaction for all credit card purchases. Titles Titles will be sent via standard mail 7 days after payment has been received, unless otherwise specified in the description of the item, and will be mailed to the address provided by bidder upon registration. Reserve Bidding Items on auction may have an undisclosed reserve. Sellers, Hallberg Auction, or other agent of seller may bid on items up to reserve amount in order to aid in the sale of the item. *By placing a bid, bidder signifies that they have inspected items to their satisfaction. *Hallberg Auction reserves the right to remove any property prior to close of the auction. *Hallberg Auction reserves the right to reject any bid at our discretion. *Bidders who register at any of our auctions will be included in our mailing lists to receive print or digital communication regarding upcoming auctions. Your information will not be sold to third parties and you may opt out of receiving notices at any time. Item Descriptions are for Identification purposes; they constitute no warranties expressed or implied. You are encouraged to make your own in-person inspection of all property before bidding.
Two Day Sapp Machinery Auction 2409 Highway 9, Buffalo Center, Iowa Wednesday, September 10th 5:00 pm Online Only Vehicles, Trailers, Mowers, Boats and ATVs Auction to include: Passenger vehicles, Enclosed Trailers, Light Trailers, Riding Lawn Mowers (running), Boats, Campers, ATVs/UTVs/Side-by-Sides. Consignments will be taken Tuesday, August 26 through Friday, September 5th (excluding Sunday 1st) 9:00 am - 5:00 pm. Thursday September 11th at 10:00 am Live Machinery Auction with Online Bidding Available Auction to include: Tractors, Combines and Harvest Equipment, Tillage Equipment, Semis, Grain Trailers, Gravity Wagons and Grain Carts, Transportable Augers, New Hay Racks and other Equipment. Consignments will be taken Tuesday, August 26th through Friday, September 5th (excluding Sunday and September 1) 9:00 am - 5:00 pm. NO SMALL LINE FOR SEPTEMBER 2025 AUCTION To consign call Hallberg Auction 800-373-2255 www.hallbergauction.com

3
Loftness Stalk Chopper 6 row, 16'
Model180SH54P244G Serial # 02-1146, small 1000 pto hydraulic lift good paint, good hammers

4
1949 Farmall M (Runs and Drives)
Has been shedded, Good Rubber, Power Steering (needs new gasket on reservoir ) straight metal, SN: 182404

5
Allis Chalmers 185 Diesel (Runs and Drives)
Serial # 2880 Drove in Tractor Ride this summer, Good Auger Tractor, 2 Hydraulics, 540 PTO

6
1951 B John Deere Runs and Drives
new tires, new motor Electric Start, Straight Metal

7
1959 550 Oliver Tractor w/3pt Runs and Drives
Serial # 73145-519 4413.6 Hours

7
Ford 216 3pt Plow
IOI 10-455, Serial # 1694

8

9
1968 International 656 Hydro w/ WL 21 Loader (gas)
Tire Chains All Season Cab (no heat) Runs and Drives, Engine rebuilt at 1900 hours by Red Power. shows 2015 on Tach Serial # 34898, 15.5 - 38 Rubber

10
Massey Fergusen 1135 Perkins Diesel
New Clutch 2 yrs ago, Runs and Drives, shows 3702 hours, Tires 18.4-38, 11.00-16 1000 PTO, 2 hyd.

11

12
1940 John Deere B (non-running)
Serial # B89378 Looks Good, Loose Last used 3 years ago.

13
Tebben 3 pt. Ripper 7 Shank
24" Spacing Double Frame Leveler

14
Parker 5500 Wagon
Side dump, Brakes, 445/65R 22.5 Super Single Truck Tires

15
550 Year Round Gravity Box
21.5L-16.1 Flotation Tires Center and Side Dump (real good condition) Green and Yellow, Brakes

16
Rhino 173 3pt rotary mower 72", Nice
540 PTO, Deflector Chains,

17

18

19

20

21

22

23

24

25
Massey Ferguson Sileage Chopper
on board knife electric sharpener Used 2 months ago

26
Hiniker AR2000 Stalk Cutter 8 Row
Large 1000 PTO Hydraulic Lift

27

28

30

29

31

32
'62 Farmall 340 Gas Tractor Runs & Drives Good
manuals in office 1388 hours Serial # 7566

33
1979 Leyland 154 Runs and Drives Good
3pt, PTO, 25 HP, 1 New Rear Tire Shows 2962 hours Serial # 54P/301175/Z 12557, Manual in Office

34
Case 1835B Diesel Skidloader Runs Good
Quick Attach Bucket 4268 Hours

35
Parker 350 bu Wagon on Parker Gear
Brakes Good 16.5-16.1 Rubber

36
Vermeer PT12 Tile Trencher
used 3 years ago (needs work) cable winch, 540 PTO

37

38

40
Loftness 3pt. Stalk Chopper
Large 1000 PTO Hydraulic LIft

41

42

49

50

51

52

53
Parker 2600 Wagon with Parker Gear
400 bushel, 16.5-16.1 tires, Single door

54

55

56
450 bu Double Door Wagon with Brakes
Knowles gear 16.5-16.1 Tires

66

57

60

61
International 485 Disk 24' 9" spacing
Front 21.5" gang notched blades, Hydraulic Fold, and tote of scrapers by disk

62
Brent 550 Gravity Wagon
445-65-22.5 Super Singles, Brakes, Single door, Lights

63
Killbros 550 Gravity Wagon on Killbros Gear
445-65-22.5 Super Sings, Single Door, Lights, Brakes

64
Case IH 6500 11 Shank Disc Chisel
Model 6500CONT 0190000 Serial ID JAG 0012824 13.5' 15' Spacing 19.5" Blades

66

67

68
John Deere 327 15' Stalk Chopper (works well)
small 1000 PTO, hydraulic lift

69

70

71

73

72

76

77

78
New Holland TR96 Combine
new solenoid 3836 Engine Hours 30.5-32, Ag Leader PF3000

79
New Holland Corn Head
6 Row 30" Spacing Poly Dividers

80

81
John Deere 960 Field Cultivator 32'
Knock on sweeps, 3 bar harrow

82

83
John Deere Rock Disk 26.5' 9" spacing
Hydraulic Fold, 19" front 20" Rear

84
New Idea 3732 Tandem Manure Spreader
Poly floor liner, slop gate

85
John Deere 2700 Ripper 19" blades
Wheel bearings repacked, Replaced disc bearings last year

86
New Idea Ground Driven Manure Spreader
Repainted, Good Floor, New Tires Never been used for intended purpose. Used in Parades

87

88

89
Unverferth Zone Builder 4 Shank Ripper 30"
w/complete fifth shank and disc

91
John Deere Mower Conditioner 9' Cut Crimper
Extra blades and bolts in Office

92

93
'95 Bobcat 742B Skidloader
Fully Serviced, Runs

94

95

96
Case IH 260 Magnum
3578 Hours, Front Duals, Suspended Cab, 4 SCV Remotes, Large Hydraulic Pump, 372 Receiver, Auto Steer,

97

98

99
Case IH 1660 Combine
4700 hours, after market chopper

100

101
Case IH 1020 Bean Head 22 1/2'
Crary Air Reel (control in office)

103
'04 John Deere 9860 STS
4092 Engine Hours 1879 Seperator Hours, 4 New Tires, 520/85-R38, 600/65-28, Rear Wheel Assist, Contour Master, New Batteries, Fuel Gauge says low fuel even when full Manual in Office

104
'03 John Deere 1293 Corn Head
Header Height Control PTO Shaft Drive

105

106
John Deere 635F Bean Platform
Full Finger Auger PTO Shaft Drive

107

108
Case 7088 Axial Flow Combine
Tach has been changed approximate 3350 hours 480/80R42 Drives, 18.4-26 Steers

109
John Deere 9400 Combine
3414 engine hours, 2370 Separator Hours 24.5-32 Drives 14.9-24 Steers, Chaff Spreader

110
John Deere 643 Corn Head
Poly Center Snouts,, Steel Outer

111

113

114

115

116
'91 Kenworth T600 20' x 96" Scott Box
VIN 1XKAD29X6MJ557939, 350 Cummins Engine, 9 Speed Transmission, Air Ride, Twin Screw, Roll Tarp 22.5 Rubber , Jake Brake, Air Operated PTO, Rear Hitch for Pup Trailer

117

118

119
Case IH 2020 Bean Platform 35"
Full Finger Auger, Crary Air Reel

120

121
'96 John Deere 9600 Combine
4414 motor hours/ 2928 on separator hours, Rear Wheel Assist, Bin Extensions, head sells next lot Serial # H09600X666651 Ag Leader PF Monitor, Headsight, Chaff Spreader, 18.4.-38, 18.4-26 Manual in Office

122
John Deere 893 Corn Head
8 row , corn catcher

123
John Deere 630F Bean Head 30'
Hydra Flex, Full Finger Auger, Single Point PTO Shaft

124

125
'95 Polar tanker 40' 9000 Gallon
4 compartments, clean, Nice pump & fittings, Fill from top or bottom, Everything works, 90% Rubber 90% Brakes, Air Suspension, Tall 22.5 Rubber

126
'13 Great Dane 28' Dry Van Trailer
VIN:1GRAA5612DB7107 Set Back Dollies, 40% Rubber 80% Brakes E-z Roll Up Door, Menator Tire Air System

127

128
John Deere 930 F Flex Head
Single Point Hookup, Full Finger Auger, PTO Shaft Drive

129

130

131
Homemade Head Trailer
(Fits 6 row corn head 20' bean head

132

133

134
Alloway GS15 10" x 60' Auger
540 PTO, Manual Lift

135

136
Westfield MK100-71 Auger
Sing Hopper 540 PTO Hydraulic Lift

137

138
DMI Ecolo Tiger 530 B Disk Ripper
5 shank 30' spacing, New Points,21 .5 - 22" Blades, Shank Guards, Leveler

139
International 485 Disk 20'
Hydraulic Fold, 19" Blade

140

141
Cat Challenger 65D Serial # 2ZJ02134
8359 Hours Guidance System, Serial # 2ZJ02134

142

143

144

145

146
Killbros 500 bu Wagon
killbros gear, 16/5-16.1 Tires, Brakes

147

148

149

150
Parker 510 Grain Cart
Gear Built Rebuilt, 23.1-26, Corner Auger, Small 1000 PTO

151

152

153
'85 Allis Chalmers 8070 Runs and Drives
Front wheel assist, Power Shift, w/duals, full set of weights on front, using breath of ether to start, Second tach actual hours unknown, Manual In Office

154

155

156

157

158

159