L.M. Stevenson Machine Shop
Listing ID#: 850486

Sale Location
Kirila Rd
Hermitage, PA 16148
Sale Dates and Times
Bidding Starts: Wednesday Feb 18
Bidding Ends: Wednesday Mar 18
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandmachinery.com

EstateSale.com ID#: 10931
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made.
1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up.
2.Purchases shall be paid for by Friday, March 13 at 3 pm, with cash, WV, PA or Ohio co. checks, credit card or wire transfer. 3% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer.
3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them.
4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given.
5.A Buyer�s Premium of 15% online.
6.$10 minimum bid on all lots.
7.No one under the age of 18 years of age is permitted to register or bid.
8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property.
9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid.
10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101.
11.Removal dates and times: .By Appointment Only until March 31. Items not picked up by end of day March 31 will be considered forfeit unless arrangements have been made with the auctioneer. Call or see auctioneer for details.
12.NSF or stop payment checks are subject to a $35.00 returned check fee.
Listing Information
MACHINE SHOP TOOLING & MACHINE TOOLS, INCLUDING LATHES, MILLS, PAINT BOOTH, SUBARC MACHINE, WELDERS, & MORE

1
ESAB AVENGER CNC WATER JET/ PLASMA BURNER
MFG 1996, 16' OVERALL, 24" UNDER NOZZLES, 128" BETWEEN COLUMNS, W/ PREST-O-WELD WC-7C COOLANT CIRCULATOR - SN AC-1539084, ESP ULTRA-LIFE 300 PLASMA POWER SOURCE- SN PE-I607048 100% DUTY CYCLE, 300 A @ 130V OUTPUT RANGE 100-300 AMP, OPEN CIRCUIT VOLTA...






7
AERO-MOTIVE ERGOMATION BALANCER
MODEL BF 9, SN OO5674, CAPACITY 6.0-9.0 LBS


9
LODGE & SHIPLEY 25" STANDARD LATHE
128" BETWEEN CENTERS, 28" MAX SWING OVER WAYS, 18" SWING OVER CROSS SLIDE, SINGLE POST TOOL HOLDER & ASST TOOL HOLDERS, 8" & 18" STEADY REST, 24" 4-JAW CHUCK, SN 40945





14
MONARCH 16" X 54" ENGINE LATHE
16" SWING OVER WAYS, SN 49822, MODEL 612, 7990 LB WEIGHT, 8" SWING OVER CROSS SLIDE, 54" BETWEEN CENTERS, WITH TRAVEL DIAL, 12" 3- JAW CHUCK











24
LATHE TOOLING
INDEXABLE INSERT TOOLING, KEYS, WRENCHES, 1 QUICK CHANGE HOLDER

25
MISC HAND TOOLS
FILES, MALLETS, WRENCHES, ALLEN WRENCHES, C-CLAMP

26
MISC
END MILLS, MAGNETIC BASE, CUP WHEEL, SOLDER













39
DAYTON 3 PHASE AC ELECTRIC MOTOR
MODEL 2N927-C, 3/4 HP, 1140 RPM, KS66 FRAME, CONT DUTY,



























67
LINCOLN RANGER 8 GAS WELDER ON TRAILER
1601 HOURS, MISSING K NO, CODE & SN

68
MILLER CP-200 WELDER
SN KD473050, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

69
MILLER CP-200 WELDER
SN KD473047, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

70
TUDA LATHE 48" x 20' JUMBO 1250 x 6000
39" 4-JAW CHUCK, 4-WAY TOOL POST, 38" SWING OVER CROSS SLIDE, E/M THEADING, 6-590 RPM x 16 SPEEDS, 15" & 25" STEADY RESTS, SN H84006





























99
PAINT BOOTH - LAID DOWN FOR TRANSPORT
12'X12', OPEN ON ONE SIDE, LARGE DIAMETER EXHAUST PIPING, WITH 2 HP, 230/460V ELECTRIC MOTOR







106
NEW FASTENERS
A325 STRUCTURAL BOLTS 1-8x 3-3/4, WASHERS, 1-8 ANCO PN LOCK NUTS,

107
NEW FASTENERS
1-8 ANCO PN LOCK NUTS, HEX CAP SCREWS 3/4"-10x5", MISC



110
TOS VARNSDORF WHQ 13.8 CNC TABLE TYPE HORZ BORING
86.5"x71" TABLE, SN 0529, YEAR 1994, HEIDENHAIN CONTROLS, 5" SPINDLE, 110" VERT SPINDLE TRAVEL, (98.5), HORZ TABLE, 135", 36", 60 POSITION ATC, 13" LONG HEAD




114
MILLER CP-302 WELDER, ON CART, 60 SERIES WIRE FEED
SN LH400193C, STOCK 907050, 200/230/460V, 38 AMPS, 12.3 KW, 100% DUTY CYCLE

115
MILLER MC-300VS, ON STAND
SN KB030732, STOCK 902625, 200/230/460V, 3 PH, 39/34/17 AMPS, 11.9KW, OUTPUT 32 V, 300 AMP, 100% DUTY CYCLE, 48 MAX OCV

116
MILLER DELTAWELD 452
SN KF962681, STOCK 903394, 230/460/575V, 62/31/25 AMP, 21.1 KW, 3 PH, OUTPUT 38V, 450 AMPS, 100% DUTY CYCLE, 48 MAX OCV


118
MILLER CP-300 WELDER, ON CART, 22A WIRE FEED
SN KB128648, STOCK 902931, 200/230/460V, 38//33/16.5 AMP, 12.3KW, 3 PH, OUTPUT- 32V, 300A, 100% DUTY CYCLE, 44 MAX OCV

119
SUBARC FRAME LAID DOWN, NOT ASSEMBLED
CROSS RAIL 160", 164" UPRIGHTS, WITH COUNTER WEIGHTS

120
LINCOLN DC-600
SN U1041104835, CODE 11129, 230/460V,

121
LINCOLN DC-600
SN U1080701295, CODE 11335, 230/460V,

122
4 MILLER WIRE FEEDS
70 SERIES, 22A, S-22A, 70 SERIES

123
TWO MILLER WIRE FEEDS
S-52E, 60 SERIES



126
MILLER DIMENSION 452 WELDER, ON CART
SN LF108399, STOCK 903255-01-12, 230/460/575V, 90/45/36A, 22.3KW, 3 PHASE, OUTPUT 38V, 450A, 100% DUTY CYCLE,

127
ASSORTED BATHROOM PORCELAIN
2 TOILETS, TANKLESS, URINAL, 4 SINKS, ONE LONG SINK

128
MARVEL 8 MARK III TILTING HEAD VERTICAL BANDSAW
SN 840103, 460V, 3 PH, 60 HZ, 11.6A

129
DEVAIR DUAL AIR COMPRESSOR & DRYER
USED IN PARALLEL TO ENSURE NO LOSS OF PRESSURE, TWO DEVAIR VAVC-5000, 15 HP, 200V, 43A, 3 PH, 60 HZ, APPROX 5855 HOURS PER UNIT, AIR DRYER MODEL RNC125A1, SN RG0J0125A01A2ND08069, RATED FOR 125 SCFM @100 PSIG & 100 DEG. F



132
BLACK DIAMOND DRILL SHARPENER
NO 2A, 1/8"-1/2" RANGE, 1/3 HP,



135
METAL LOCKING CABINET
NO KEY, 24"x36"x36"


















Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

L.M. Stevenson Machine Shop

Hartland Auctioneers

Hartland Auctioneers


Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
Kirila Rd
Hermitage, PA 16148
Sale Dates and Times
Sale Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by Friday, March 13 at 3 pm, with cash, WV, PA or Ohio co. checks, credit card or wire transfer. 3% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 15% online. 6.$10 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: .By Appointment Only until March 31. Items not picked up by end of day March 31 will be considered forfeit unless arrangements have been made with the auctioneer. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
Listing Details
MACHINE SHOP TOOLING & MACHINE TOOLS, INCLUDING LATHES, MILLS, PAINT BOOTH, SUBARC MACHINE, WELDERS, & MORE

1
ESAB AVENGER CNC WATER JET/ PLASMA BURNER
MFG 1996, 16' OVERALL, 24" UNDER NOZZLES, 128" BETWEEN COLUMNS, W/ PREST-O-WELD WC-7C COOLANT CIRCULATOR - SN AC-1539084, ESP ULTRA-LIFE 300 PLASMA POWER SOURCE- SN PE-I607048 100% DUTY CYCLE, 300 A @ 130V OUTPUT RANGE 100-300 AMP, OPEN CIRCUIT VOLTA...






7
AERO-MOTIVE ERGOMATION BALANCER
MODEL BF 9, SN OO5674, CAPACITY 6.0-9.0 LBS


9
LODGE & SHIPLEY 25" STANDARD LATHE
128" BETWEEN CENTERS, 28" MAX SWING OVER WAYS, 18" SWING OVER CROSS SLIDE, SINGLE POST TOOL HOLDER & ASST TOOL HOLDERS, 8" & 18" STEADY REST, 24" 4-JAW CHUCK, SN 40945





14
MONARCH 16" X 54" ENGINE LATHE
16" SWING OVER WAYS, SN 49822, MODEL 612, 7990 LB WEIGHT, 8" SWING OVER CROSS SLIDE, 54" BETWEEN CENTERS, WITH TRAVEL DIAL, 12" 3- JAW CHUCK











24
LATHE TOOLING
INDEXABLE INSERT TOOLING, KEYS, WRENCHES, 1 QUICK CHANGE HOLDER

25
MISC HAND TOOLS
FILES, MALLETS, WRENCHES, ALLEN WRENCHES, C-CLAMP

26
MISC
END MILLS, MAGNETIC BASE, CUP WHEEL, SOLDER













39
DAYTON 3 PHASE AC ELECTRIC MOTOR
MODEL 2N927-C, 3/4 HP, 1140 RPM, KS66 FRAME, CONT DUTY,



























67
LINCOLN RANGER 8 GAS WELDER ON TRAILER
1601 HOURS, MISSING K NO, CODE & SN

68
MILLER CP-200 WELDER
SN KD473050, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

69
MILLER CP-200 WELDER
SN KD473047, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

70
TUDA LATHE 48" x 20' JUMBO 1250 x 6000
39" 4-JAW CHUCK, 4-WAY TOOL POST, 38" SWING OVER CROSS SLIDE, E/M THEADING, 6-590 RPM x 16 SPEEDS, 15" & 25" STEADY RESTS, SN H84006





























99
PAINT BOOTH - LAID DOWN FOR TRANSPORT
12'X12', OPEN ON ONE SIDE, LARGE DIAMETER EXHAUST PIPING, WITH 2 HP, 230/460V ELECTRIC MOTOR







106
NEW FASTENERS
A325 STRUCTURAL BOLTS 1-8x 3-3/4, WASHERS, 1-8 ANCO PN LOCK NUTS,

107
NEW FASTENERS
1-8 ANCO PN LOCK NUTS, HEX CAP SCREWS 3/4"-10x5", MISC



110
TOS VARNSDORF WHQ 13.8 CNC TABLE TYPE HORZ BORING
86.5"x71" TABLE, SN 0529, YEAR 1994, HEIDENHAIN CONTROLS, 5" SPINDLE, 110" VERT SPINDLE TRAVEL, (98.5), HORZ TABLE, 135", 36", 60 POSITION ATC, 13" LONG HEAD




114
MILLER CP-302 WELDER, ON CART, 60 SERIES WIRE FEED
SN LH400193C, STOCK 907050, 200/230/460V, 38 AMPS, 12.3 KW, 100% DUTY CYCLE

115
MILLER MC-300VS, ON STAND
SN KB030732, STOCK 902625, 200/230/460V, 3 PH, 39/34/17 AMPS, 11.9KW, OUTPUT 32 V, 300 AMP, 100% DUTY CYCLE, 48 MAX OCV

116
MILLER DELTAWELD 452
SN KF962681, STOCK 903394, 230/460/575V, 62/31/25 AMP, 21.1 KW, 3 PH, OUTPUT 38V, 450 AMPS, 100% DUTY CYCLE, 48 MAX OCV


118
MILLER CP-300 WELDER, ON CART, 22A WIRE FEED
SN KB128648, STOCK 902931, 200/230/460V, 38//33/16.5 AMP, 12.3KW, 3 PH, OUTPUT- 32V, 300A, 100% DUTY CYCLE, 44 MAX OCV

119
SUBARC FRAME LAID DOWN, NOT ASSEMBLED
CROSS RAIL 160", 164" UPRIGHTS, WITH COUNTER WEIGHTS

120
LINCOLN DC-600
SN U1041104835, CODE 11129, 230/460V,

121
LINCOLN DC-600
SN U1080701295, CODE 11335, 230/460V,

122
4 MILLER WIRE FEEDS
70 SERIES, 22A, S-22A, 70 SERIES

123
TWO MILLER WIRE FEEDS
S-52E, 60 SERIES



126
MILLER DIMENSION 452 WELDER, ON CART
SN LF108399, STOCK 903255-01-12, 230/460/575V, 90/45/36A, 22.3KW, 3 PHASE, OUTPUT 38V, 450A, 100% DUTY CYCLE,

127
ASSORTED BATHROOM PORCELAIN
2 TOILETS, TANKLESS, URINAL, 4 SINKS, ONE LONG SINK

128
MARVEL 8 MARK III TILTING HEAD VERTICAL BANDSAW
SN 840103, 460V, 3 PH, 60 HZ, 11.6A

129
DEVAIR DUAL AIR COMPRESSOR & DRYER
USED IN PARALLEL TO ENSURE NO LOSS OF PRESSURE, TWO DEVAIR VAVC-5000, 15 HP, 200V, 43A, 3 PH, 60 HZ, APPROX 5855 HOURS PER UNIT, AIR DRYER MODEL RNC125A1, SN RG0J0125A01A2ND08069, RATED FOR 125 SCFM @100 PSIG & 100 DEG. F



132
BLACK DIAMOND DRILL SHARPENER
NO 2A, 1/8"-1/2" RANGE, 1/3 HP,



135
METAL LOCKING CABINET
NO KEY, 24"x36"x36"


















Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
L.M. Stevenson Machine Shop
 Online Only Auction
Sale Date(s)
Bidding Starts: Wednesday Feb 18
Bidding Ends: Wednesday Mar 18
Sale Location
Kirila Rd
Hermitage, PA 16148
Company
Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by Friday, March 13 at 3 pm, with cash, WV, PA or Ohio co. checks, credit card or wire transfer. 3% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 15% online. 6.$10 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: .By Appointment Only until March 31. Items not picked up by end of day March 31 will be considered forfeit unless arrangements have been made with the auctioneer. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
MACHINE SHOP TOOLING & MACHINE TOOLS, INCLUDING LATHES, MILLS, PAINT BOOTH, SUBARC MACHINE, WELDERS, & MORE

1
ESAB AVENGER CNC WATER JET/ PLASMA BURNER
MFG 1996, 16' OVERALL, 24" UNDER NOZZLES, 128" BETWEEN COLUMNS, W/ PREST-O-WELD WC-7C COOLANT CIRCULATOR - SN AC-1539084, ESP ULTRA-LIFE 300 PLASMA POWER SOURCE- SN PE-I607048 100% DUTY CYCLE, 300 A @ 130V OUTPUT RANGE 100-300 AMP, OPEN CIRCUIT VOLTA...

2

3

4

5

6

7
AERO-MOTIVE ERGOMATION BALANCER
MODEL BF 9, SN OO5674, CAPACITY 6.0-9.0 LBS

8

9
LODGE & SHIPLEY 25" STANDARD LATHE
128" BETWEEN CENTERS, 28" MAX SWING OVER WAYS, 18" SWING OVER CROSS SLIDE, SINGLE POST TOOL HOLDER & ASST TOOL HOLDERS, 8" & 18" STEADY REST, 24" 4-JAW CHUCK, SN 40945

10

11

12

13

14
MONARCH 16" X 54" ENGINE LATHE
16" SWING OVER WAYS, SN 49822, MODEL 612, 7990 LB WEIGHT, 8" SWING OVER CROSS SLIDE, 54" BETWEEN CENTERS, WITH TRAVEL DIAL, 12" 3- JAW CHUCK

15

15

15

17

18

19

20

21

22

23

24
LATHE TOOLING
INDEXABLE INSERT TOOLING, KEYS, WRENCHES, 1 QUICK CHANGE HOLDER

25
MISC HAND TOOLS
FILES, MALLETS, WRENCHES, ALLEN WRENCHES, C-CLAMP

26
MISC
END MILLS, MAGNETIC BASE, CUP WHEEL, SOLDER

27

28

29

30

31

32

33

34

35

36

37

38

39
DAYTON 3 PHASE AC ELECTRIC MOTOR
MODEL 2N927-C, 3/4 HP, 1140 RPM, KS66 FRAME, CONT DUTY,

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

67
LINCOLN RANGER 8 GAS WELDER ON TRAILER
1601 HOURS, MISSING K NO, CODE & SN

68
MILLER CP-200 WELDER
SN KD473050, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

69
MILLER CP-200 WELDER
SN KD473047, STOCK NO 902930, 200/230/460V, 21.4/13.6/9.3 A, RATED OUTPUT - 28V, 200A, 100% DUTY CYCLE, MAX OCV 39

70
TUDA LATHE 48" x 20' JUMBO 1250 x 6000
39" 4-JAW CHUCK, 4-WAY TOOL POST, 38" SWING OVER CROSS SLIDE, E/M THEADING, 6-590 RPM x 16 SPEEDS, 15" & 25" STEADY RESTS, SN H84006

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99
PAINT BOOTH - LAID DOWN FOR TRANSPORT
12'X12', OPEN ON ONE SIDE, LARGE DIAMETER EXHAUST PIPING, WITH 2 HP, 230/460V ELECTRIC MOTOR

100

101

102

103

104

105

106
NEW FASTENERS
A325 STRUCTURAL BOLTS 1-8x 3-3/4, WASHERS, 1-8 ANCO PN LOCK NUTS,

107
NEW FASTENERS
1-8 ANCO PN LOCK NUTS, HEX CAP SCREWS 3/4"-10x5", MISC

108

109

110
TOS VARNSDORF WHQ 13.8 CNC TABLE TYPE HORZ BORING
86.5"x71" TABLE, SN 0529, YEAR 1994, HEIDENHAIN CONTROLS, 5" SPINDLE, 110" VERT SPINDLE TRAVEL, (98.5), HORZ TABLE, 135", 36", 60 POSITION ATC, 13" LONG HEAD

111

112

113

114
MILLER CP-302 WELDER, ON CART, 60 SERIES WIRE FEED
SN LH400193C, STOCK 907050, 200/230/460V, 38 AMPS, 12.3 KW, 100% DUTY CYCLE

115
MILLER MC-300VS, ON STAND
SN KB030732, STOCK 902625, 200/230/460V, 3 PH, 39/34/17 AMPS, 11.9KW, OUTPUT 32 V, 300 AMP, 100% DUTY CYCLE, 48 MAX OCV

116
MILLER DELTAWELD 452
SN KF962681, STOCK 903394, 230/460/575V, 62/31/25 AMP, 21.1 KW, 3 PH, OUTPUT 38V, 450 AMPS, 100% DUTY CYCLE, 48 MAX OCV

117

118
MILLER CP-300 WELDER, ON CART, 22A WIRE FEED
SN KB128648, STOCK 902931, 200/230/460V, 38//33/16.5 AMP, 12.3KW, 3 PH, OUTPUT- 32V, 300A, 100% DUTY CYCLE, 44 MAX OCV

119
SUBARC FRAME LAID DOWN, NOT ASSEMBLED
CROSS RAIL 160", 164" UPRIGHTS, WITH COUNTER WEIGHTS

120
LINCOLN DC-600
SN U1041104835, CODE 11129, 230/460V,

121
LINCOLN DC-600
SN U1080701295, CODE 11335, 230/460V,

122
4 MILLER WIRE FEEDS
70 SERIES, 22A, S-22A, 70 SERIES

123
TWO MILLER WIRE FEEDS
S-52E, 60 SERIES

124

125

126
MILLER DIMENSION 452 WELDER, ON CART
SN LF108399, STOCK 903255-01-12, 230/460/575V, 90/45/36A, 22.3KW, 3 PHASE, OUTPUT 38V, 450A, 100% DUTY CYCLE,

127
ASSORTED BATHROOM PORCELAIN
2 TOILETS, TANKLESS, URINAL, 4 SINKS, ONE LONG SINK

128
MARVEL 8 MARK III TILTING HEAD VERTICAL BANDSAW
SN 840103, 460V, 3 PH, 60 HZ, 11.6A

129
DEVAIR DUAL AIR COMPRESSOR & DRYER
USED IN PARALLEL TO ENSURE NO LOSS OF PRESSURE, TWO DEVAIR VAVC-5000, 15 HP, 200V, 43A, 3 PH, 60 HZ, APPROX 5855 HOURS PER UNIT, AIR DRYER MODEL RNC125A1, SN RG0J0125A01A2ND08069, RATED FOR 125 SCFM @100 PSIG & 100 DEG. F

130

131

132
BLACK DIAMOND DRILL SHARPENER
NO 2A, 1/8"-1/2" RANGE, 1/3 HP,

133

134

135
METAL LOCKING CABINET
NO KEY, 24"x36"x36"

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152