RAM PLASTICS
Listing ID#: 889587

Sale Location
North Lima, OH 44452
Full Address Available on Monday, Aug 24
Sale Dates and Times
Bidding Starts: Tuesday Aug 25
Bidding Ends: Tuesday Aug 25
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandmachinery.com

EstateSale.com ID#: 10931
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Ram Plastics
11401 South Ave
North Lima, OH 44452

No Merchandise may be removed until complete settlement has been made.
1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up.
2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion.
3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them.
4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given.
5.A Buyer�s Premium of 10% applies to all lots sold in house, 13% online.
6.$10 minimum bid on all lots.
7.No one under the age of 18 years of age is permitted to register or bid.
8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property.
9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid.
10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101.
11.Removal dates and times: .After the auction until 5 pm, weekdays 8 am to 4 pm thru 8/28. By appointment only thru 9/8. Items not picked up by end of day Sept 8 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after Sept 8. Call or see auctioneer for details.
12.NSF or stop payment checks are subject to a $35.00 returned check fee.

Listing Information
INJECTION MOLDING MACHINES FROM CINCI MILACRON, VANDORN AND HPM, PLASTIC GRINDERS, LIQUID TOTES, SKIDS, TRAILERS, FORKLIFTS, SMALL ARBOR PRESSES, BAND SAWS, WELDERS, ELECTRICAL AND HYDRAULIC PARTS,










10
FLEER BENCH GRINDER
3450 RPM, 1/2 HP




























38
MISC BELTS & ITEMS IN CORNER
DOES NOT INCLUDE ELECTRICAL PANEL COVERS!

39
MILLER THUNDERBOLT XL WELDER ON CART W/
WELDING ROD, SHIELDS, GOGGLES, TORCHES


































72
(MEZZANINE) MISC BUILDING MATERIALS
DOOR, PIPE, MISC, DOES NOT INCLUDE ANYTHING ATTACHED











80
JET DRILL PRESS, 14" SWING, 1/2" CAPACITY
MODEL JDP-14JF, 1/2 HP, 115V












92
10"x 54" ENCO VERTICAL MILLING MACHINE
SN 451285, MODEL 100-1598, EQUIPPED WITH 2-AXIS DRO, MISTER, 6" BRIDGEPORT MILL VISE, 78-4800 RPM x 16 SPEEDS




96
SOUTH BEND LATHE 14"x36"
14-1/2-16� quick change gear lathe, 36� between centers, 8� swing over cross slide, 10� -jaw chuck, 4 way tool post, 10.5� 3-jaw, 6� 4-jaw











107
JET 15" DRILL PRESS & STAND, PEDAL CONTROL
STOCK NO 354400, MODEL J-2500, SN 15073722

108
CENTRAL MACHINERY 13" DRILL PRESS & STAND
7/64"-5/8" CHUCK CAPACITY, 3-1/8" SPINDLE STROKE






















130
NEWBURY 60 INJECTION MOLDER PARTS MACHINE
MODEL H3-60MT, LOT 1 AUGUST 90, SN 8-8260-60MS-90

131
GE TRANSFORMER 5 KVA
60 HZ 1 PHASE, PRIMARY V 240/480, SECONDARY V 120/240, TEMP RISE 115, IMP % 3.6,


133
MAGNETICS TRANSFORMER ON STAND
30 KVA 3 PHASE 60 HZ, PRIMARY V 600, 36 AMP, SECONDARY V 240 72 AMP, IMP 3.2%, TEMP RISE 150 DEG C.,











144
GE ELECTRIC MOTOR 50 HP
1180 RPM, 230/460V, 128/64 AMP, 405Y FRAME


146
GE ELECTRIC MOTOR 20 HP
230/460V, 53.6/26.8 AMP, 32608C FRAME

147
GE ELECTRIC MOTOR 20HP
1185 RPM, 208-220/440 V 3 PH, 58.6/29.3 AMP, 326Y FRAME

148
DELCO ELECTRIC MOTOR 20 HP
220/440V, 51.2/25.6 AMP, 1175 RPM, 326SCZ FRAME

149
REULAND ELECTRIC MOTOR 20HP
230/460V, 55/27.5 AMP, AVE-324U-29E FRAME




Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

RAM PLASTICS

Hartland Auctioneers

Hartland Auctioneers


Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
North Lima, OH 44452
Full Address Available after 9 am
on Monday, Aug 24
Sale Dates and Times
Sale Terms and Conditions
Ram Plastics 11401 South Ave North Lima, OH 44452 No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 10% applies to all lots sold in house, 13% online. 6.$10 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: .After the auction until 5 pm, weekdays 8 am to 4 pm thru 8/28. By appointment only thru 9/8. Items not picked up by end of day Sept 8 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after Sept 8. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
Listing Details
INJECTION MOLDING MACHINES FROM CINCI MILACRON, VANDORN AND HPM, PLASTIC GRINDERS, LIQUID TOTES, SKIDS, TRAILERS, FORKLIFTS, SMALL ARBOR PRESSES, BAND SAWS, WELDERS, ELECTRICAL AND HYDRAULIC PARTS,










10
FLEER BENCH GRINDER
3450 RPM, 1/2 HP




























38
MISC BELTS & ITEMS IN CORNER
DOES NOT INCLUDE ELECTRICAL PANEL COVERS!

39
MILLER THUNDERBOLT XL WELDER ON CART W/
WELDING ROD, SHIELDS, GOGGLES, TORCHES


































72
(MEZZANINE) MISC BUILDING MATERIALS
DOOR, PIPE, MISC, DOES NOT INCLUDE ANYTHING ATTACHED











80
JET DRILL PRESS, 14" SWING, 1/2" CAPACITY
MODEL JDP-14JF, 1/2 HP, 115V












92
10"x 54" ENCO VERTICAL MILLING MACHINE
SN 451285, MODEL 100-1598, EQUIPPED WITH 2-AXIS DRO, MISTER, 6" BRIDGEPORT MILL VISE, 78-4800 RPM x 16 SPEEDS




96
SOUTH BEND LATHE 14"x36"
14-1/2-16� quick change gear lathe, 36� between centers, 8� swing over cross slide, 10� -jaw chuck, 4 way tool post, 10.5� 3-jaw, 6� 4-jaw











107
JET 15" DRILL PRESS & STAND, PEDAL CONTROL
STOCK NO 354400, MODEL J-2500, SN 15073722

108
CENTRAL MACHINERY 13" DRILL PRESS & STAND
7/64"-5/8" CHUCK CAPACITY, 3-1/8" SPINDLE STROKE






















130
NEWBURY 60 INJECTION MOLDER PARTS MACHINE
MODEL H3-60MT, LOT 1 AUGUST 90, SN 8-8260-60MS-90

131
GE TRANSFORMER 5 KVA
60 HZ 1 PHASE, PRIMARY V 240/480, SECONDARY V 120/240, TEMP RISE 115, IMP % 3.6,


133
MAGNETICS TRANSFORMER ON STAND
30 KVA 3 PHASE 60 HZ, PRIMARY V 600, 36 AMP, SECONDARY V 240 72 AMP, IMP 3.2%, TEMP RISE 150 DEG C.,











144
GE ELECTRIC MOTOR 50 HP
1180 RPM, 230/460V, 128/64 AMP, 405Y FRAME


146
GE ELECTRIC MOTOR 20 HP
230/460V, 53.6/26.8 AMP, 32608C FRAME

147
GE ELECTRIC MOTOR 20HP
1185 RPM, 208-220/440 V 3 PH, 58.6/29.3 AMP, 326Y FRAME

148
DELCO ELECTRIC MOTOR 20 HP
220/440V, 51.2/25.6 AMP, 1175 RPM, 326SCZ FRAME

149
REULAND ELECTRIC MOTOR 20HP
230/460V, 55/27.5 AMP, AVE-324U-29E FRAME




Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
RAM PLASTICS
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Aug 25
Bidding Ends: Tuesday Aug 25
Sale Location
North Lima, OH 44452
Full Address Available on Monday, Aug 24
Company
Listing Terms and Conditions
Ram Plastics 11401 South Ave North Lima, OH 44452 No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 10% applies to all lots sold in house, 13% online. 6.$10 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: .After the auction until 5 pm, weekdays 8 am to 4 pm thru 8/28. By appointment only thru 9/8. Items not picked up by end of day Sept 8 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after Sept 8. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
INJECTION MOLDING MACHINES FROM CINCI MILACRON, VANDORN AND HPM, PLASTIC GRINDERS, LIQUID TOTES, SKIDS, TRAILERS, FORKLIFTS, SMALL ARBOR PRESSES, BAND SAWS, WELDERS, ELECTRICAL AND HYDRAULIC PARTS,

1

2

3

4

5

6

7

8

9

10
FLEER BENCH GRINDER
3450 RPM, 1/2 HP

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38
MISC BELTS & ITEMS IN CORNER
DOES NOT INCLUDE ELECTRICAL PANEL COVERS!

39
MILLER THUNDERBOLT XL WELDER ON CART W/
WELDING ROD, SHIELDS, GOGGLES, TORCHES

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

72
(MEZZANINE) MISC BUILDING MATERIALS
DOOR, PIPE, MISC, DOES NOT INCLUDE ANYTHING ATTACHED

72

72

73

73

74

75

76

77

78

79

80
JET DRILL PRESS, 14" SWING, 1/2" CAPACITY
MODEL JDP-14JF, 1/2 HP, 115V

81

82

83

84

85

86

87

88

89

90

91

92
10"x 54" ENCO VERTICAL MILLING MACHINE
SN 451285, MODEL 100-1598, EQUIPPED WITH 2-AXIS DRO, MISTER, 6" BRIDGEPORT MILL VISE, 78-4800 RPM x 16 SPEEDS

93

94

95

96
SOUTH BEND LATHE 14"x36"
14-1/2-16� quick change gear lathe, 36� between centers, 8� swing over cross slide, 10� -jaw chuck, 4 way tool post, 10.5� 3-jaw, 6� 4-jaw

97

98

99

100

101

102

103

104

105

106

107
JET 15" DRILL PRESS & STAND, PEDAL CONTROL
STOCK NO 354400, MODEL J-2500, SN 15073722

108
CENTRAL MACHINERY 13" DRILL PRESS & STAND
7/64"-5/8" CHUCK CAPACITY, 3-1/8" SPINDLE STROKE

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130
NEWBURY 60 INJECTION MOLDER PARTS MACHINE
MODEL H3-60MT, LOT 1 AUGUST 90, SN 8-8260-60MS-90

131
GE TRANSFORMER 5 KVA
60 HZ 1 PHASE, PRIMARY V 240/480, SECONDARY V 120/240, TEMP RISE 115, IMP % 3.6,

132

133
MAGNETICS TRANSFORMER ON STAND
30 KVA 3 PHASE 60 HZ, PRIMARY V 600, 36 AMP, SECONDARY V 240 72 AMP, IMP 3.2%, TEMP RISE 150 DEG C.,

134

135

136

137

138

139

140

141

142

143

144
GE ELECTRIC MOTOR 50 HP
1180 RPM, 230/460V, 128/64 AMP, 405Y FRAME

145

146
GE ELECTRIC MOTOR 20 HP
230/460V, 53.6/26.8 AMP, 32608C FRAME

147
GE ELECTRIC MOTOR 20HP
1185 RPM, 208-220/440 V 3 PH, 58.6/29.3 AMP, 326Y FRAME

148
DELCO ELECTRIC MOTOR 20 HP
220/440V, 51.2/25.6 AMP, 1175 RPM, 326SCZ FRAME

149
REULAND ELECTRIC MOTOR 20HP
230/460V, 55/27.5 AMP, AVE-324U-29E FRAME

150

151

152