Ferguson Family Ammo, Reloading, and Outdoor Supplies
Listing ID#: 899921

Sale Location
116 E. Oak
Clinton, MO 64735
Sale Dates and Times
Bidding Starts: Tuesday Sep 22
Bidding Ends: Sunday Oct 4
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Crawford Auction Service

Phone: 417-399-1904
Email: crawfordonlineauction@gmail.com
Website: www.crawfordauctionservice.com

EstateSale.com ID#: 11084
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions
Bidder and Auctioneer agree that the terms listed below shall govern each online auction sale.
REGISTRATION: All information provided by bidder during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. OzarkBid.com, at its sole discretion, may deny registration to any person or entity.
BUYER'S PREMIUM: Unless a specific auction states otherwise, a 15% buyer's premium will be charged on all items and lots.
AGREEMENT TO TERMS: Access and use of any online auction site of OzarkBid.com (the 'Site') is subject to all specific terms and conditions set forth on any individual page within the Site and the terms and conditions of this User Agreement and all applicable laws and regulations, including but not limited to copyright and trademark laws. BY ACCESSING THIS SITE, YOU AGREE TO ACCEPT, WITHOUT LIMITATION OR QUALIFICATION, ALL OF THE TERMS AND CONDITIONS OF THE SITE USER AGREEMENT and to comply with all applicable laws, statutes, ordinances and regulations regarding your use of the Site. OzarkBid.com reserves the right to change the terms and conditions of the User Site Agreement from time to time, and it is the Bidder's responsibility to review any and all changes made to these terms and conditions prior to each use of the Site. By using the Site, you agree in advance to accept any such changes.
SUSPENSION / PERMANENT BAN: A Bidder will be suspended or permanently banned from the Site for providing false or fraudulent information when registering. A Bidder will be permanently banned from this Site for failing to honor an auction bid made under that Bidder's bid number.
PAYMENT: Buyer will receive an invoice via electronic mail after the close of the auction. Payment for purchases must be made by cash, Visa, MasterCard, or Discover, unless otherwise noted in a specific auction's terms and conditions. Any item or lot not paid for in full by the stated deadline will resort to suspension or permanent ban of bidder number. Ownership of your items will revert to Owner/Seller who may re-sell or dispose of items at Seller's discretion
SALES TAX: All sales are subject to appropriate state Sales Tax laws. If Bidder claims an exemption from sales tax, it is the Bidder's responsibility to provide the appropriate resale or exemption certificate for each auction at which the Bidder makes a purchase.
ITEM DESCRIPTIONS: The descriptions of items or lots appearing in the auction and in advertising are believed to be correct. Nevertheless, neither those descriptions nor any oral statements made by Owner/Seller or OzarkBid.com concerning any items or lots shall be construed as a warranty either express or implied. ITEMS AND LOTS ARE SOLD AS IS - WHERE IS and WITH ALL FAULTS. Bidder acknowledges that all items and lots were available for inspection prior to the auction and, by these terms, OzarkBid.com and Owner/Seller strongly encouraged Bidder to carefully inspect each item or lot to determine the nature, quality, condition, quantity and size of the item or lot. Bidder relied solely on personal inspection and not on information listed on the Site or otherwise provided by OzarkBid.com or Owner/Seller. The IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE SPECIFICALLY EXCLUDED from this sale and transaction and shall NOT apply to the merchandise that is the subject of these sales. OzarkBid.com does not have control over the items or lots that are posted in the Site, and cannot guarantee the authenticity and quality of said product. Auctioneer is not responsible for the actions the Sellers and Buyers take before, during, and after the auction. Use of this site is at your own risk. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you.
ALL AUCTIONS WITH RESERVE: All auctions of OzarkBid.com are with reserve. Per the Auctioneer an auction "with reserve" is one in which the seller or his agent reserves the right to establish a minimum bid, accept or reject any and all bids, and withdraw the property at any time prior to the announcement of the completion of the sale by the auctioneer. Sellers reserve the right to bid on all auctions. Auctioneers and their employees reserve the right to bid on their own or the Seller's behalf.
REMOVAL: Merchandise becomes the full responsibility of Buyer at the close of auction, and Buyer assumes all risk of loss and damage to property until removed from sale premises. The date by which all merchandise must be removed from the premises is posted on an auction-by-auction basis. THERE ARE NO EXCEPTIONS TO REMOVAL DEADLINES!! Bidders who fail to pick up purchases by the removal deadline will incur storage fees in the amount of $10.00 per week per item. Items remaining 30 days after removal deadline will be considered as abandoned, and ownership will revert to Seller, who may resell or dispose of items. Any funds paid will be forfeited for failure to abide by the terms of sale.
ADJUSTMENTS: No adjustment will be made with regard to merchandise inventory after the item or lot has been removed from the sale premises, or after the removal deadline whether or not the property has been removed. OzarkBid.com reserves the right, for any reason, in its sole discretion, to terminate, change or suspend any aspect of the auction sale.
DISPUTE BETWEEN BIDDERS: The final high bidder shall be designated at the end of each item or lot. If a dispute arises between two or more Bidders, OzarkBid.com reserves the right to reopen bidding. OzarkBid.com's designation of the Buyer shall be final.
INDEMNITY: Bidder accepts responsibility for and agrees to indemnify, defend and hold harmless each Owner/Seller and OzarkBid.com and their employees, governing body, officers, owners, affiliates, subsidiaries, directors, agents and representatives from and against any and all claims, losses, damages, liabilities, judgments, fees, costs and expenses (including reasonable attorneys' fees and expenses) related to, arising from or associated with Buyer's, his agents or representatives, use of the Site, including but not limited to personal injuries or property damage incurred on the sale premises or during removal and transport of any auction items or lots, and arising out of, based upon, or resulting from any breach or violation by Bidder of this Site User Agreement or any use by Bidder of the Site or as a result of a dispute with another Bidder.
TERMINATION OF AGREEMENT: This Site User Agreement constitutes a binding agreement between Bidder and OzarkBid.com until terminated by OzarkBid.com. OzarkBid.com may terminate this agreement at any time, without notice, in OzarkBid.com's sole discretion. If Bidder dissatisfaction occurs with the auction sale in any way, Bidder's only recourse is to immediately discontinue use of the auction Site. OzarkBid.com reserves the right to terminate Bidder registration and use of the auction Site, and impose limits on certain features of the auction Site or restrict Bidder's access to, or use of, part or the entire Site without notice or penalty.
INTERRUPTION OF SERVICE: OzarkBid.com cannot, and will not, be held responsible for any interruption in service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the Site. Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning. OzarkBid.com, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any items or lots that were affected by any malfunction. The decision of OzarkBid.com is final.
PRIVACY: OzarkBid.com gathers information about Bidders and Owner/Sellers for the purposes of conducting online auctions. OzarkBid.com does not sell or rent this information. OzarkBid.com uses electronic mail mailing lists to notify its customers about online and live auctions. If you are receiving a particular mailing and wish to discontinue receiving future mailings, simply forward the received e-mail to OzarkBid.com to have your name promptly removed from our list.
BID IS A LEGAL CONTRACT: As a Bidder, placing a bid is a binding contract between you and the Owner/Seller and the bid cannot be retracted. Once you place a bid, and if you win, you will be obligated to buy the product at the said price you indicated as your bid. Placing a bid on this Site, and winning, then not paying for the product is illegal in most states, and prosecution can result. The Owner/Sellers of property sold through this Site reserve the right to reject any and all bids, in their sole discretion.
NO WARRANTY ON SITE USAGE: You agree that you will not copy, reproduce, alter, modify, create derivative works, or publicly display any content from the Site without prior, express written permission of OzarkBid.com. THE SITE IS PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE WARRANTIES WHICH ARE IMPOSED BY AND INCAPABLE OF EXCLUSION, RESTRICTION OR MODIFICATION UNDER THE LAWS APPLICABLE TO THIS AGREEMENT. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. No legal advice is intended or implied by anything contained within the Site. No obligation, liability, responsibility, accountability or burden is undertaken, assumed or otherwise imposed by maintaining the Site.
AUTO EXTEND FEATURE: If an auction receives a bid in the last five minutes, the ending time for that auction will automatically be extended by five minutes. Once five minutes have passed without any bidding, the item will close. This feature prevents "sniping" and allows all bidders an equal opportunity to be the high bidder if they so choose.
Listing Information
JACK AND PATSY FERGUSON ESTATE AUCTION Online only. Bidding closes Sunday, October 4, 2026 at 7:00 PM Central. Jack and Patsy Ferguson of Quincy, Missouri spent a lifetime outdoors. They traveled the world hunting, and Jack was a handloader of the old school, the kind who bought good components when he saw them and kept a bench stocked deep enough to ride out any shortage. Jack has passed away and Patsy is downsizing. What follows is that bench, that gun room and that camp, offered in 355 lots. This is one of the deepest reloading estates we have handled. If you load your own, clear your calendar for this one. Everything sells from our auction warehouse in Clinton, Missouri. SMOKELESS POWDER AND PROPELLANTS Lots 3001 through 3025 are an extraordinary run of canister powders covering nearly every burn rate a handloader uses. Hodgdon Varget, H4895, H4350, H4831 and H4831SC, H414, H380, H335, H1000, Retumbo, BL-C(2), Benchmark, Lil Gun, Longshot, Universal, CFE Pistol, CFE BLK, Hybrid 100V, Trail Boss, Titegroup and H110. IMR 3031, 4064, 4198, 4227, 4350, 4831, 4895, 7828 and the Enduron series. Alliant Reloder 15, 19, 22, 23 and 25, plus Unique, Bullseye, Blue Dot, 2400, Power Pistol and AR-Comp. Winchester 748, 760, 296, 540 and 231. Accurate, Ramshot, VihtaVuori and Norma. Older Hercules and DuPont cans as well. Lot 3009 includes GOEX FFFg true black powder. Read this carefully. Every powder container in this sale is partial and was opened by Jack during his loading. None is a sealed full pound. We did not weigh them. If you want to know how much is left in a particular container before you bid, call 417-399-1904 and we will weigh it and tell you. Powder is pickup only and will not be shipped under any circumstances. AMMUNITION Roughly sixty lots of ammunition across an unusual spread of chamberings: 22-250 Remington, .223 Remington, .243 Winchester, 6mm Remington, 6.5 Creedmoor, .308 Winchester, 30-30 Winchester, 30-06, .220 Swift, 7mm Remington Magnum, 8mm Remington Magnum, .300 Winchester Magnum, .338 Winchester, .38-40 Winchester, .25 ACP, .32 H and R Magnum, .38 Special, .357 Magnum, .357 SIG, .40 S and W, .41 Remington Magnum, .44 Magnum, .45 Auto, .45 Colt, 9mm Luger, .22 rimfire, and 12, 16 and 410 gauge shotshells. Be clear about what most of this is. Jack was a handloader and the large majority of the loaded ammunition in this sale was loaded by him, not by a factory. We have said so on every lot where that is the case. Those rounds were not commercially manufactured, they have not been tested, and they are sold for component and collector value with the buyer assuming all risk of use. A handful of lots are genuine sealed factory ammunition and we have said that too. Where case heads were visible we read and published the headstamps so you know what you are looking at. Round counts on handloads are unverified and we ask you to count at pickup. RELOADING COMPONENTS Bullets by the box and by the case. Barnes TSX and X, Nosler Partition and Ballistic Tip, Sierra MatchKing and GameKing, Hornady, Speer, Berger and Woodleigh in .224, 6mm, .264, 7mm, .308, .323, .338 and handgun diameters. Brass in quantity, primers, wads, shot and powder measures. Standouts include lot 2036, a 22-250 Remington brass and Barnes TSX grouping, lot 1014 with fourteen boxes of .308 bullets, lot 1019 in 7mm Remington Magnum, lot 2035 with twenty-one boxes of .224 bullets, and lot 1097 with eleven boxes of 8mm Barnes X and Nosler. DIES, PRESSES AND BENCH EQUIPMENT More than seventy die lots, and we put the caliber in the title of every one of them so you can find what fits your rifle. RCBS, Lee, Lyman, Hornady and Pacific in everything from .32 S and W Long to .400 Cor-Bon, including 7mm STW, 6.5-06, .223 WSSM, .270 WSM and 8mm Remington Magnum. Three shotshell presses: two MEC Sizemasters, lots 1509 and 1511, and a first generation Lee Load-All in 12 gauge, lot 1510. Three scales including an RCBS 5-0-2 and a Lee Safety, a Frankford Arsenal case tumbler, case trimmers, primer tools and a Chrony chronograph. BARRELS, PARTS AND FIREARM ACCESSORIES Lot 2500 holds five rifle barrels: a Remington 25-06, a stainless 7mm Remington Magnum with a ported brake, a Savage pattern .243 Winchester, a Douglas blank chambered by a gunsmith in 2002, and a Ruger rimfire barrel. Lot 2501 is a substantial parts lot of stocks, forends and hardware. Add gun cleaning equipment, hard cases, shooting rests, an Argentine Model 1891 sword bayonet by Weyersberg Kirschbaum of Solingen in lot 1093, trail cameras, game calls and optics accessories. TOOLS, CAMP AND HUNTING GEAR A full shop of Craftsman, Channellock, Milwaukee, SKIL and Chicago Pneumatic hand and power tools. Two Keuffel and Esser and Brunson surveying instruments. Coleman lanterns and camp stoves, coolers, cots, chairs, sleeping bags, a pop-up blind and a ground blind. Hunting apparel in named sizes from Carhartt, Duxbak, Walls, L.L. Bean, Eddie Bauer, Frogg Toggs and Cabela's, including insulated coveralls, bibs, vests and waders. HOW WE CATALOGED THIS SALE Every lot in this auction was written from its own photographs. We counted items from a single wide photograph of each lot rather than adding up close-ups, because a close-up of the same item photographed twice is not two items. Where a lot could not be counted with confidence we said so instead of guessing. Where a box label did not match its contents we said that too. Every lot carries an estimated value researched against recent sold prices, not asking prices. We would rather you bid with your eyes open. TERMS PREVIEW: [INSERT PREVIEW DATE AND TIME] PICKUP: [INSERT PICKUP DATES AND HOURS] LOCATION: Crawford Auction Service warehouse, Clinton, Missouri. [INSERT STREET ADDRESS] All items sell as-is, where-is, with no warranty expressed or implied. Photographs are the most accurate description of each lot. Written descriptions are a guide only and may contain errors. Please review all photographs before bidding. All sales are final. Smokeless powder and black powder are pickup only and will not be shipped. Loaded ammunition may ship by ground where lawful. Buyer is responsible for compliance with all applicable local, state and federal laws regarding the purchase, possession, storage and transport of ammunition and propellants. Buyer must be of legal age. Handloaded ammunition in this sale was loaded by the late Jack Ferguson. It was not commercially manufactured, has not been tested, and is sold for component and collector value. The buyer assumes all risk of use. Payment is due at the close of the auction. Lots not removed within the stated pickup window may be considered abandoned. Questions, condition reports and powder weights: call Chase Crawford at 417-399-1904 or email chase@CrawfordAuctionService.com Crawford Auction Service. Trusted in Missouri since 1944.

500
Barronett Prowler 350 Pop Up Hunting Blind
One Barronett Blinds Prowler 350 pop up hub hunting blind in a woodland camouflage pattern, shown set up on the warehouse floor along with its black Barronett carry bag. A hub blind pulls open from the center, so one person can set it up in a couple ...

501
Frigidaire Gallery GLFC1526FWA Chest Freezer
One Frigidaire Gallery white chest freezer, model GLFC1526FWA, serial WB34768710, built 11-13 by Electrolux Home Products and assembled in the USA. The data plate reads 115 volts, 5.0 amps, 60 hertz and 6.0 ounces of R134a refrigerant, type C15. Frig...

502
Coleman 9400 Series Two Burner Propane Stove
One Coleman propane camp stove, 9400 series, two burner, in its padded black Coleman carry bag with the printed operating instruction sheet in a plastic sleeve. The stove folds into a flat case with a lid and two side wind baffles that swing out to b...

503
Set of 2 Black Steel Stacking Banquet Chairs
Two matching stacking banquet chairs with black powder coated steel frames and black padded vinyl seats and oval backrests. Chairs of this pattern are the standard church hall and fire hall chair, built to stack several high against a wall so a room ...

1000
Craftsman 19.2V EX Cordless 3 Tool Combo Kit
A Craftsman 19.2 volt EX cordless combo kit in its black plastic case. The lot holds (1) a 5-1/2 inch trim saw, model 315.114260, (2) a 1/2 inch drill driver, model 315.114480, (3) a 19.2 volt nailer and stapler, (4) a one hour charger, (5) two batte...

1001
Pittsburgh Jumbo Metric Socket Set 19-50mm 20 Pc
A Pittsburgh 20 piece jumbo socket set, 3/4 inch drive, in its blow molded case. The case lid is printed 20 PIECE JUMBO SOCKET SET, 3/4 IN. DRIVE, 19-50 MM. Note that this is a metric set, not SAE. The tray holds sixteen 12 point chrome sockets plus ...

1002
Keuffel and Esser Surveyor Transit and Tripod
An antique Keuffel and Esser Co. surveyor's transit, serial 109463, in its fitted wood carrying case with brass corners, a hinged door and a leather shoulder strap. The instrument has the black japanned finish with polished brass fittings, a telescop...

1003
Brunson Surveyors Level with Dietzgen Tripod
A Brunson surveyor's level, serial 638924, marked with patent numbers 2208014 and 2329978 and engraved LAWHON on the telescope barrel. It comes in its original dovetailed wood case with the Brunson oval branded into the lid, a leather carry strap, a ...

1004
Shooting Chrony F-1 Chronograph Tripod and Case
A Shooting Chrony chronograph outfit in a shop built aluminum carrying box. The lot holds (1) the green sheet metal Chrony sensor body with the Model F-1 readout unit, (2) six cream colored plastic diffuser brackets, (3) four metal skyscreen support ...

1005
115 Piece Jobber Drill Bit Set in Metal Index
A jobber length drill bit index in a gray steel case with a hinged lid, laid out in the 115 piece pattern that covers number drills 1 through 60, letter drills A through Z and fractional sizes from 1/16 to 1/2 inch. The printed charts inside the lid ...

1006
BSA Optics Bore Sighter Kit with 15 Arbors
A BSA Optics multi caliber bore sighter kit in its molded black case. The kit holds the bore sighter body with its magnetic mount and fifteen steel arbors, one for each bore size. The arbor pockets in the case are marked .177, .22, 6mm, .25, 6.5mm, ....

1007
Craftsman 15 Pc SAE Combination Wrench Set USA
A Craftsman 15 piece standard combination wrench set, item 44185, 12 point box end, made in the USA, with its original cardboard box. The box lists the sizes as 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 and 1-1...

1008
Dremel Moto-Tool 395 Variable Speed Kit 3950
A Dremel Moto-Tool Kit 3950 built around the Model 395 Type 4 variable speed rotary tool, rated 5,000 to 30,000 RPM at 1.15 amps with a ball bearing motor. The lot includes the tool in its gray plastic carrying case, the original cardboard box, the D...

1009
Turner Propane Torch Kit and Soldering Tool Lot
A Turner propane torch kit with a group of plumbing and soldering accessories. The blue steel Turner case holds the printed Turner Propane Torch operating instructions, a coil of solder wire and a putty knife. Laid out with it are (1) a brass torch v...

1010
SKIL 9215 8.5 Amp Reciprocating Saw with Manual
One SKIL reciprocating saw, model 9215, with its operating and safety instruction booklet. The rating label reads 120 volts, 60 hertz, 8.5 amps, 800 to 2700 strokes per minute and a 1-1/8 inch, 28.5 mm stroke, part F012921500, built by Bosch Tool Cor...

1011
38 Special 357 Bullets Brass and Reloads Lot
Six boxes of 38 caliber and 357 diameter handgun components and reloads. It holds (1) a Speer 180 grain .357 TMJ box with about seven bullets, (2) a Hornady .357 125 grain HP XTP box, number 35710, with about twenty bullets, (3) a Missouri Bullet Com...

1012
30 Cal 308 Bullets 18 Boxes Sierra Speer Nosler
Eighteen boxes of 30 caliber .308 diameter rifle bullets, stacked in nine pairs for the group shot. Labels read Hornady 170 grain FP number 3060, Sierra 180 grain Spitzer number 2150, Barnes XLC 180 grain X number 30858, two boxes of Hornady 165 grai...

1013
30 Cal 308 Bullets 13 Boxes Hornady Sierra Speer
Thirteen boxes of 30 caliber .308 diameter rifle bullets. Labels read Hornady 220 grain round nose number 3090, Hornady 190 grain BTSP number 3085, Hornady 190 grain BTHP number 3085, Speer Grand Slam 165 grain number 2038, Hornady 165 grain BTSP num...

1014
30 Cal 308 Bullets 14 Boxes Hornady Nosler Barnes
Fourteen boxes of 30 caliber .308 diameter rifle bullets, and this is the premium group in the block. Six of the boxes are Hornady Interlock with the factory holographic wrap and old shop price tags still attached, reading 150 grain SP number 3031 at...

1015
Pyrodex Triple Seven Pellets and 50 Cal Sabots
Four containers of muzzleloading supplies. The lot holds (1) a Hodgdon Pyrodex Pellets 50/50 case, 100 pre formed charges, net weight 8.57 ounces, (2) a Hodgdon Triple Seven case, 100 pre formed pellets 50/50, net weight 6.9 ounces, (3) a Thompson Ce...

1016
44 Caliber and 22 Caliber Bullets Lot 4 Boxes
Four boxes of handgun and rifle bullets. The lot holds (1) an E and E Lead Products extra hard cast match grade box marked 44 240g SWC, nearly full of 240 grain hard cast semi wadcutters with red lube grooves, hand priced $49.95, (2) a Hornady Bullet...

1017
41 Cal 410 Dia 210 Grain Bullets Hornady Sierra
Two boxes of 41 caliber .410 diameter 210 grain pistol bullets for the 41 Remington Magnum. The lot holds (1) a Hornady box, 100 count, number 41000, 41 Cal 210 Gr .410 hollow point XTP, lot 94-037, with the red FACTORY SEALED FOR YOUR PROTECTION tap...

1018
32 Caliber 95 Grain Cast Performance FNPB Bullets
One box of Cast Performance Bullet Company LBT style heat treated solids, marked 32/95 gr. FNPB, .312 diameter, 100 count. The box is opened and partial and holds a working quantity of heat treated cast flat nose plain base bullets with blue lube in ...

1019
7mm Remington Magnum Bullets and Brass 14 Boxes
Fourteen boxes of 7mm .284 diameter components. Thirteen hold bullets and one holds brass. Labels read two boxes of Sierra 120 grain Spitzer number 1900, Barnes 160 grain flat base X number 28446, Barnes 140 grain boattail X number 28444, Speer Grand...

1020
8mm 323 Rifle Bullets Lot 16 Boxes Sierra Nosler
Sixteen boxes of 8mm .323 diameter rifle bullets. Labels read Sierra 220 grain Spitzer boat tail number 2420, a second Sierra 8mm box, Nosler Ballistic Tip 180 grain Spitzer number 32180, Hornady 220 grain SP number 3238 quantity 100, Hornady 170 gra...

1021
Bulk Jacketed Soft Point Rifle Bullets Carton
One carton of bulk jacketed rifle bullets. The carton is a reused shipping box with red marker writing across the tape that reads in part No Lubricant and a price of twenty five cents. Inside are sealed plastic bags holding a large quantity of copper...

1022
Lee 400 Cor-Bon 3 Die Set and Factory Crimp Die
A Lee reloading die set for the 400 Cor-Bon in the red Lee storage box, plus a separate Lee Factory Crimp Die for the same cartridge. The red box holds the three die set with its shell holder, and alongside it are the loose Factory Crimp Die, two cle...

1023
Lee 30-30 Winchester 3 Die Set with Factory Crimp
A Lee reloading die set for the 30-30 Winchester, item 90506, in the red Lee storage box with the clear lid. The set is three dies, being a full length sizing and decapping die, a bullet seating die and the Lee Factory Crimp Die, along with the shell...

1024
Lee 44 Magnum Carbide 4 Die Set 90512
A Lee carbide reloading die set for the 44 Remington Magnum, item 90512, in the red Lee storage box. The set is four dies, being a carbide full length sizing and decapping die, a powder through expanding die, a bullet seating die and the Lee Factory ...

1025
Lee 338 Winchester Magnum Collet 2 Die Set 90721
A Lee collet die set for the 338 Winchester Magnum, item 90721, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, with the printed instruction sheet. The box label gives th...

1026
Lee 8mm Remington Magnum Factory Crimp Die
One Lee Factory Crimp Die in the red Lee storage box with the printed Lee Factory Crimp Die instruction sheet, a small yellow plastic accessory and the box lid. The instruction sheet is hand marked 8mm Rm for 8mm Remington Magnum. The collet fingers ...

1027
Lee 25-06 Remington Collet 2 Die Set 90711
A Lee collet die set for the 25-06 Remington, item 90711, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and t...

1028
Lee 357 SIG 3 Die Set with Shell Holder
A Lee reloading die set for the 357 SIG in the red Lee storage box. The set is three dies, being the carbide sizing and decapping die, the powder through expanding die and the bullet seating die, with the shell holder and the printed Lee instruction ...

1029
Lee 7mm Remington Magnum 2 Die Set Shell Holder
A Lee reloading die set for the 7mm Remington Magnum in the red Lee storage box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder, a yellow plastic accessory and the printed Lee ins...

1030
Lee 7mm STW Shooting Times Westerner 2 Die Set
A Lee reloading die set for the 7mm Shooting Times Westerner in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, a sizing die and a seating die, along with a spare lock ring. One die body is stamped 7MM STW. The 7...

1031
Lee 7mm Remington Magnum Factory Crimp Die 90821
One Lee Factory Crimp Die for the 7mm Remington Magnum, item 90821, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set. A Factory Crimp Die works differently from the crimp built into...

1032
Lee 7mm STW Factory Crimp Die 90869
One Lee Factory Crimp Die for the 7mm Shooting Times Westerner, item 90869, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set, and the die body is stamped 7MM STW. The 7mm STW is an ...

1033
RCBS 9mm Luger 3 Die Set 20504 with Shell Holder
An RCBS three die set for the 9mm Luger, part number 20504, in the green RCBS box with the yellow end label. The set is three dies, being the sizing and decapping die, the expander die and the bullet seating die, along with an RCBS shell holder and a...

1034
Hornady 6.5-06 Custom Grade 2 Die Set 546280
A Hornady Custom Grade New Dimension two die set for the 6.5-06, Series IV, full length, item 546280, in the red Hornady box with the foam insert. The end label calls for shell holder number 1. The set is two dies, being the full length sizing die an...

1035
RCBS 270 Winchester 2 Die Full Length Set 13501
An RCBS full length two die set for the 270 Winchester, part number 13501, group A, in the green RCBS box. The end label calls for shell holder number 3. The set is two dies, being the full length sizing and decapping die and the bullet seating die, ...

1036
RCBS 380 Auto 3 Die Carbide Taper Crimp Set
An RCBS three die carbide taper crimp set for the 380 Auto, part number 20415, group B, in the gray RCBS storage box. The end label calls for shell holder number 10. The set is three dies, being the carbide sizing and decapping die, the expander die ...

1037
RCBS 38-40 Winchester 3 Die Set Vintage Box
An RCBS three die set for the 38-40 Winchester in the old yellow and green RCBS cardboard box printed RELOADING IS FUN. The set is three dies wrapped in tissue paper, and the sizing die body is stamped RCBS 38-40 F.L. for full length. An old ink pric...

1038
RCBS 45 ACP Carbide Sizer and Seater Die Pair
Two RCBS dies for the 45 ACP in the gray RCBS storage box that is labeled as a three die carbide taper crimp set, part number 20415 style packaging, with the end label calling for shell holder 03. Read this before bidding. Only two of the three dies ...

1039
Lee 429 Bullet Lubricating and Sizing Kit Die
A Lee bullet lubricating and sizing kit for .429 inch bullets in the red Lee storage box with the printed instruction sheet. The sizing die is stamped LEE-429-B6. The lot is the one die plus the box and the sheet. A Lee sizing kit is what a cast bull...

1040
Lee 300 Winchester Magnum 3 Die Set 90539 Crimp
A Lee reloading die set for the 300 Winchester Magnum, item 90539, in the red Lee storage box with an old shop price sticker of $21.00 on the lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the L...

1041
Lee 22-250 Remington 3 Die Set with Crimp 90503
A Lee reloading die set for the 22-250 Remington, item 90503, in the red Lee storage box with the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp D...

1042
Lee 338 Winchester Magnum 3 Die Set 90546 Crimp
A Lee reloading die set for the 338 Winchester Magnum, item 90546, in the red Lee storage box with a shop inventory sticker on the lid and the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the b...

1043
Lee 243 Winchester Collet 2 Die Set 90709
A Lee collet die set for the 243 Winchester, item 90709, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and th...

1044
RCBS Case Trimmer Collet No 3 and 30 Cal Pilot
An RCBS case trimmer collet, No. 3, part number 09373, in its green RCBS box, together with a case trimmer pilot stamped 30 for the .308 inch bore. An old C R Specialty price sticker of $4.00 is on the box. The collet is the part that grips the case ...

1045
Lee 243 Winchester 3 Die Set 90504 Factory Crimp
A Lee reloading die set for the 243 Winchester, item 90504, in the red Lee storage box with the clear lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp Die, plus the shell hol...

1046
Lee 32 Smith and Wesson Long Carbide 4 Die Set
A Lee carbide four die set for the 32 Smith and Wesson Long in the red Lee storage box. The packaging card in the lid lists the contents as a steel shell holder and powder measure, a carbide sizing die, a bullet seating and feeding die and a carbide ...

1047
Lee 223 WSSM 2 Die Set 90446 with Shell Holder
A Lee reloading die set for the 223 Winchester Super Short Magnum, item 90446, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, together with the shell holder, a yellow 2.8 c...

1048
Lee 270 WSM 2 Die Set 90572 with Shell Holder
A Lee reloading die set for the 270 Winchester Short Magnum, item 90572, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder and the printed Lee instructio...

1049
Lee 8mm Remington Magnum 2 Die Set 90775
A Lee reloading die set for the 8mm Remington Magnum, item 90775, in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, being the full length sizing and decapping die and the bullet seating die. The die bodies are s...

1050
Lee Universal Decapping Die 90292 in Red Box
One Lee Precision Universal Decapping Die, part number 90292, in the original red box with the factory instruction sheet. The die body is stamped LEE DECAPPER H2 and wears a hex lock ring. A universal decapper does one job and does it in any caliber....

1051
Lee 25-06 Remington Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 25-06 Remington, part number 90836 on the box end, packed in the original red box with the factory instruction sheet. This is the collet style rifle crimp die that Lee is known for. Four hardened fingers close ...

1052
Bystrom 44 Magnum 3 Die Pistol Set in Box
A vintage three piece pistol die set in 44 Magnum from Bystrom, sold through Minnesota Shooters Supply of Minneapolis. The box label reads 3 PIECE PISTOL DIES CALIBER 44 MAG. The set holds a sizing die stamped 44 SIZER, an expanding die and a bullet ...

1053
RCBS 30-06 Springfield 2 Die Set Green Box
An RCBS Precisioneered two die set for 30-06 Springfield in the old green cardboard box with the caliber written on the end label and an original price sticker of $13.50. The two dies are wrapped in factory paper. One is the full length sizing die wi...

1054
RCBS 30-06 Springfield 2 Die Full Length Set
An RCBS full length die set for 30-06 Springfield, Group A, in the green plastic Omark era box with the original instruction sheet and a price tag of $18.00. The set holds the full length sizing die with its decapping rod and expander ball and the bu...

1055
Redding 6.5mm-06 Seating Die 92378 Series C
A Redding Series C seating die for the 6.5mm-06 wildcat, part number 92378, in the original Redding box. The die body is stamped REDDING 6.5-06 and the box end reads SEAT DIE SERIES C 6.5MM 06. The lot also holds a micrometer style seating adjustment...

1056
RCBS 45 Colt Carbide 3 Die Set 19112
An RCBS carbide three die set for 45 Colt, part number 19112, Group B, in the gray RCBS box that calls for shell holder number 20. Four die bodies are present. There is a carbide sizing die stamped 45 COLT, an expanding die, a seating die stamped COL...

1057
Hornady 30-30 Winchester 2 Die Set 546342
A Hornady Custom Grade New Dimension two die full length set for 30-30 Winchester, item number 546342, Series I, calling for shell holder number 2. The red box holds the full length sizing die with the Hornady Zip Spindle decapping assembly, the bull...

1058
RCBS 6.5 Creedmoor 2 Die Full Length Set
An RCBS full length die set for 6.5 Creedmoor, part number 32901, Group D, calling for shell holder number 3. The green box holds the full length sizing die and the bullet seating die, both stamped RCBS 6.5 CRDMR, along with the printed instruction s...

1059
RCBS 380 Auto Taper Crimp Seater Die 20462
One RCBS taper crimp seating die for 380 Auto, part number 20462, Group B, calling for shell holder number 10. The die body is stamped RCBS 380 AUTO T slash C. It comes in the green RCBS box with the printed instruction sheet. A taper crimp die is th...

1060
Lyman 38 Special 357 Magnum Carbide Sizer Die
A Lyman All American carbide sizing die for 38 Special and 357 Magnum, part number 7590179, in the orange Lyman box marked CARBIDE SIZER and DELUXE SIZING DIE 357 38. The die is still in its factory paper wrap and comes with a lock ring, a small Alle...

1061
Lee 243 Winchester Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 243 Winchester, part number 90819, in the original red box with the factory instruction sheet. This is the collet style rifle crimp die. Four hardened steel fingers squeeze the case mouth inward from the outsid...

1062
Lee 6mm Remington Factory Crimp Die 90832
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet. The collet crimp design uses four hardened fingers that close on the case mouth from the outside, so the crimp is un...

1063
Lee 6mm Remington Factory Crimp Die in Red Box
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet and the barcode label intact on the end. A factory crimp die is the last die in the sequence. After the bullet is sea...

1064
Lee Universal Case Expanding Die in Box
One Lee Precision Universal Case Expanding Die in the original box with the factory instruction sheet. The die body is stamped LEE EXPNDR A9. Lee describes it as a tapered expander that will flare any case from 22 caliber through 45 caliber. This is ...

1065
Lee Hand Priming Tool Shell Holder Set of 11
A Lee Precision shell holder set for the Lee Auto Prime and hand priming tools, red plastic tray, part number SH3571. Eleven shell holders are present and one well in the twelve place tray is empty. The holders carry the Lee numbers 1, 2, 3, 4, 5, 7,...

1066
RCBS 6mm Remington 2 Die Full Length Set
An RCBS full length die set for 6mm Remington, Group A, in the green RCBS box with the part number T1501 on the end label. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die with an adjustable...

1067
RCBS 243 Winchester 2 Die Set 11401 Green Box
An RCBS full length die set for 243 Winchester, part number 11401, Group A, calling for shell holder number 3, in the green Omark era box with the reloading data card. The set holds the full length sizing die with its decapping rod and expander ball ...

1068
Lyman 357 Magnum 3 Die Pistol Set in Box
A Lyman All American three die pistol set for 357 Magnum, part number 7462309, in the orange Lyman box. The end label reads 3 DIE PISTOL 357 MAG and carries a shop marking of USED $13.00. Three dies are present, a sizing die, an expanding die and a b...

1069
RCBS 22-250 Remington 2 Die Full Length Set
An RCBS full length die set for 22-250 Remington, part number 10601, Group A, in the green RCBS box. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die, which is stamped SEAT on the body. Also...

1070
RCBS 8mm Remington Magnum 2 Die Set 16001
An RCBS full length die set for 8mm Remington Magnum, part number 16001, Group A, calling for shell holder number 4, in the green RCBS box. An old Carls Gun Shop price tag of $25.95 is still on the lid. The set holds the full length sizing die with i...

1071
RCBS 25-06 Remington 2 Die Full Length Set
An RCBS full length die set for 25-06 Remington, part number 12001, Group A, in the green RCBS box with the printed reloading data card and a red price sticker of $10.00. Both dies are stamped RCBS 25-06. The set holds the full length sizing die with...

1072
RCBS 40 SW 10mm Auto Carbide 3 Die Set 22115
An RCBS three die carbide taper crimp set for 40 Smith and Wesson and 10mm Auto, part number 22115, Group B, calling for shell holder number 27, in the gray RCBS box. The set holds the carbide sizing die, the expanding die and the taper crimp seating...

1073
RCBS 264 Neck Expander Die 39811 with Plug
An RCBS neck expander die for 264 caliber, part number 39811, in the green RCBS box. The label has 308 added by hand in blue marker. The die body is stamped EXP BODY 11 and is fitted with an expander plug marked 264. A second loose expander plug is i...

1074
RCBS 6.5mm-06 2 Die Full Length Set 27801
An RCBS full length die set for 6.5mm-06, part number 27801, Group D, calling for shell holder number 3, in the green RCBS box. Both dies are stamped RCBS 6.5-06. The set holds the full length sizing die with its decapping rod and expander ball and t...

1075
RCBS 308 Winchester 3 Die Set and Primer Tool
A 308 Winchester die group in an RCBS green box marked FL DIE SET 308 WIN, part number 15501, Group A, shell holder number 3, with a handwritten price of $36.50. Three dies are present. Two are RCBS and are stamped RCBS 308 WIN, the full length sizer...

1076
RCBS 38 Special SWC 3 Die Set 18306 Group B
An RCBS three die set for 38 Special with a semi wadcutter seating plug, part number 18306, Group B, in the green RCBS box. An old Maywood Sports store sticker is on the lid. Three dies are present, a sizing die stamped 38 SIZE, an expanding die and ...

1077
44 Caliber Bullet Lot 4 Boxes 240 and 255 Gr
Four containers of 44 caliber bullets from the Ferguson bench. The lot holds (1) a Speer box of 44 caliber 240 grain 429 diameter soft points, number 4457, with roughly a dozen bullets left, (2) a Montana Bullet Works box of 44 Magnum Authentic Keith...

1078
Hornady XTP and Cast 45 Colt Bullets 2 Boxes
Two boxes of 45 caliber bullets. The first is a Hornady box of 45 caliber 250 grain XTP hollow points, item 45200, 452 inch diameter, quantity 100, with 45 COLT written on the lid in marker and an old green price dot of $37. The bullets are still in ...

1079
Sierra 30-30 125 Gr Flat Nose HP 2 Boxes
Two Sierra boxes of 30-30 caliber rifle bullets, 308 diameter, 125 grain flat nose hollow point, Pro Hunter, item number 2020, marked 100 rifle bullets on the label. Both boxes have been opened and are partly used. Each one holds roughly two dozen bu...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Ferguson Family Ammo, Reloading, and Outdoor Supplies

Crawford Auction Service

Crawford Auction Service


Contact:
Phone: 417-399-1904
Sale Location
116 E. Oak
Clinton, MO 64735
Sale Dates and Times
Sale Terms and Conditions
Terms and Conditions Bidder and Auctioneer agree that the terms listed below shall govern each online auction sale. REGISTRATION: All information provided by bidder during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. OzarkBid.com, at its sole discretion, may deny registration to any person or entity. BUYER'S PREMIUM: Unless a specific auction states otherwise, a 15% buyer's premium will be charged on all items and lots. AGREEMENT TO TERMS: Access and use of any online auction site of OzarkBid.com (the 'Site') is subject to all specific terms and conditions set forth on any individual page within the Site and the terms and conditions of this User Agreement and all applicable laws and regulations, including but not limited to copyright and trademark laws. BY ACCESSING THIS SITE, YOU AGREE TO ACCEPT, WITHOUT LIMITATION OR QUALIFICATION, ALL OF THE TERMS AND CONDITIONS OF THE SITE USER AGREEMENT and to comply with all applicable laws, statutes, ordinances and regulations regarding your use of the Site. OzarkBid.com reserves the right to change the terms and conditions of the User Site Agreement from time to time, and it is the Bidder's responsibility to review any and all changes made to these terms and conditions prior to each use of the Site. By using the Site, you agree in advance to accept any such changes. SUSPENSION / PERMANENT BAN: A Bidder will be suspended or permanently banned from the Site for providing false or fraudulent information when registering. A Bidder will be permanently banned from this Site for failing to honor an auction bid made under that Bidder's bid number. PAYMENT: Buyer will receive an invoice via electronic mail after the close of the auction. Payment for purchases must be made by cash, Visa, MasterCard, or Discover, unless otherwise noted in a specific auction's terms and conditions. Any item or lot not paid for in full by the stated deadline will resort to suspension or permanent ban of bidder number. Ownership of your items will revert to Owner/Seller who may re-sell or dispose of items at Seller's discretion SALES TAX: All sales are subject to appropriate state Sales Tax laws. If Bidder claims an exemption from sales tax, it is the Bidder's responsibility to provide the appropriate resale or exemption certificate for each auction at which the Bidder makes a purchase. ITEM DESCRIPTIONS: The descriptions of items or lots appearing in the auction and in advertising are believed to be correct. Nevertheless, neither those descriptions nor any oral statements made by Owner/Seller or OzarkBid.com concerning any items or lots shall be construed as a warranty either express or implied. ITEMS AND LOTS ARE SOLD AS IS - WHERE IS and WITH ALL FAULTS. Bidder acknowledges that all items and lots were available for inspection prior to the auction and, by these terms, OzarkBid.com and Owner/Seller strongly encouraged Bidder to carefully inspect each item or lot to determine the nature, quality, condition, quantity and size of the item or lot. Bidder relied solely on personal inspection and not on information listed on the Site or otherwise provided by OzarkBid.com or Owner/Seller. The IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE SPECIFICALLY EXCLUDED from this sale and transaction and shall NOT apply to the merchandise that is the subject of these sales. OzarkBid.com does not have control over the items or lots that are posted in the Site, and cannot guarantee the authenticity and quality of said product. Auctioneer is not responsible for the actions the Sellers and Buyers take before, during, and after the auction. Use of this site is at your own risk. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. ALL AUCTIONS WITH RESERVE: All auctions of OzarkBid.com are with reserve. Per the Auctioneer an auction "with reserve" is one in which the seller or his agent reserves the right to establish a minimum bid, accept or reject any and all bids, and withdraw the property at any time prior to the announcement of the completion of the sale by the auctioneer. Sellers reserve the right to bid on all auctions. Auctioneers and their employees reserve the right to bid on their own or the Seller's behalf. REMOVAL: Merchandise becomes the full responsibility of Buyer at the close of auction, and Buyer assumes all risk of loss and damage to property until removed from sale premises. The date by which all merchandise must be removed from the premises is posted on an auction-by-auction basis. THERE ARE NO EXCEPTIONS TO REMOVAL DEADLINES!! Bidders who fail to pick up purchases by the removal deadline will incur storage fees in the amount of $10.00 per week per item. Items remaining 30 days after removal deadline will be considered as abandoned, and ownership will revert to Seller, who may resell or dispose of items. Any funds paid will be forfeited for failure to abide by the terms of sale. ADJUSTMENTS: No adjustment will be made with regard to merchandise inventory after the item or lot has been removed from the sale premises, or after the removal deadline whether or not the property has been removed. OzarkBid.com reserves the right, for any reason, in its sole discretion, to terminate, change or suspend any aspect of the auction sale. DISPUTE BETWEEN BIDDERS: The final high bidder shall be designated at the end of each item or lot. If a dispute arises between two or more Bidders, OzarkBid.com reserves the right to reopen bidding. OzarkBid.com's designation of the Buyer shall be final. INDEMNITY: Bidder accepts responsibility for and agrees to indemnify, defend and hold harmless each Owner/Seller and OzarkBid.com and their employees, governing body, officers, owners, affiliates, subsidiaries, directors, agents and representatives from and against any and all claims, losses, damages, liabilities, judgments, fees, costs and expenses (including reasonable attorneys' fees and expenses) related to, arising from or associated with Buyer's, his agents or representatives, use of the Site, including but not limited to personal injuries or property damage incurred on the sale premises or during removal and transport of any auction items or lots, and arising out of, based upon, or resulting from any breach or violation by Bidder of this Site User Agreement or any use by Bidder of the Site or as a result of a dispute with another Bidder. TERMINATION OF AGREEMENT: This Site User Agreement constitutes a binding agreement between Bidder and OzarkBid.com until terminated by OzarkBid.com. OzarkBid.com may terminate this agreement at any time, without notice, in OzarkBid.com's sole discretion. If Bidder dissatisfaction occurs with the auction sale in any way, Bidder's only recourse is to immediately discontinue use of the auction Site. OzarkBid.com reserves the right to terminate Bidder registration and use of the auction Site, and impose limits on certain features of the auction Site or restrict Bidder's access to, or use of, part or the entire Site without notice or penalty. INTERRUPTION OF SERVICE: OzarkBid.com cannot, and will not, be held responsible for any interruption in service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the Site. Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning. OzarkBid.com, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any items or lots that were affected by any malfunction. The decision of OzarkBid.com is final. PRIVACY: OzarkBid.com gathers information about Bidders and Owner/Sellers for the purposes of conducting online auctions. OzarkBid.com does not sell or rent this information. OzarkBid.com uses electronic mail mailing lists to notify its customers about online and live auctions. If you are receiving a particular mailing and wish to discontinue receiving future mailings, simply forward the received e-mail to OzarkBid.com to have your name promptly removed from our list. BID IS A LEGAL CONTRACT: As a Bidder, placing a bid is a binding contract between you and the Owner/Seller and the bid cannot be retracted. Once you place a bid, and if you win, you will be obligated to buy the product at the said price you indicated as your bid. Placing a bid on this Site, and winning, then not paying for the product is illegal in most states, and prosecution can result. The Owner/Sellers of property sold through this Site reserve the right to reject any and all bids, in their sole discretion. NO WARRANTY ON SITE USAGE: You agree that you will not copy, reproduce, alter, modify, create derivative works, or publicly display any content from the Site without prior, express written permission of OzarkBid.com. THE SITE IS PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE WARRANTIES WHICH ARE IMPOSED BY AND INCAPABLE OF EXCLUSION, RESTRICTION OR MODIFICATION UNDER THE LAWS APPLICABLE TO THIS AGREEMENT. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. No legal advice is intended or implied by anything contained within the Site. No obligation, liability, responsibility, accountability or burden is undertaken, assumed or otherwise imposed by maintaining the Site. AUTO EXTEND FEATURE: If an auction receives a bid in the last five minutes, the ending time for that auction will automatically be extended by five minutes. Once five minutes have passed without any bidding, the item will close. This feature prevents "sniping" and allows all bidders an equal opportunity to be the high bidder if they so choose.
Listing Details
JACK AND PATSY FERGUSON ESTATE AUCTION Online only. Bidding closes Sunday, October 4, 2026 at 7:00 PM Central. Jack and Patsy Ferguson of Quincy, Missouri spent a lifetime outdoors. They traveled the world hunting, and Jack was a handloader of the old school, the kind who bought good components when he saw them and kept a bench stocked deep enough to ride out any shortage. Jack has passed away and Patsy is downsizing. What follows is that bench, that gun room and that camp, offered in 355 lots. This is one of the deepest reloading estates we have handled. If you load your own, clear your calendar for this one. Everything sells from our auction warehouse in Clinton, Missouri. SMOKELESS POWDER AND PROPELLANTS Lots 3001 through 3025 are an extraordinary run of canister powders covering nearly every burn rate a handloader uses. Hodgdon Varget, H4895, H4350, H4831 and H4831SC, H414, H380, H335, H1000, Retumbo, BL-C(2), Benchmark, Lil Gun, Longshot, Universal, CFE Pistol, CFE BLK, Hybrid 100V, Trail Boss, Titegroup and H110. IMR 3031, 4064, 4198, 4227, 4350, 4831, 4895, 7828 and the Enduron series. Alliant Reloder 15, 19, 22, 23 and 25, plus Unique, Bullseye, Blue Dot, 2400, Power Pistol and AR-Comp. Winchester 748, 760, 296, 540 and 231. Accurate, Ramshot, VihtaVuori and Norma. Older Hercules and DuPont cans as well. Lot 3009 includes GOEX FFFg true black powder. Read this carefully. Every powder container in this sale is partial and was opened by Jack during his loading. None is a sealed full pound. We did not weigh them. If you want to know how much is left in a particular container before you bid, call 417-399-1904 and we will weigh it and tell you. Powder is pickup only and will not be shipped under any circumstances. AMMUNITION Roughly sixty lots of ammunition across an unusual spread of chamberings: 22-250 Remington, .223 Remington, .243 Winchester, 6mm Remington, 6.5 Creedmoor, .308 Winchester, 30-30 Winchester, 30-06, .220 Swift, 7mm Remington Magnum, 8mm Remington Magnum, .300 Winchester Magnum, .338 Winchester, .38-40 Winchester, .25 ACP, .32 H and R Magnum, .38 Special, .357 Magnum, .357 SIG, .40 S and W, .41 Remington Magnum, .44 Magnum, .45 Auto, .45 Colt, 9mm Luger, .22 rimfire, and 12, 16 and 410 gauge shotshells. Be clear about what most of this is. Jack was a handloader and the large majority of the loaded ammunition in this sale was loaded by him, not by a factory. We have said so on every lot where that is the case. Those rounds were not commercially manufactured, they have not been tested, and they are sold for component and collector value with the buyer assuming all risk of use. A handful of lots are genuine sealed factory ammunition and we have said that too. Where case heads were visible we read and published the headstamps so you know what you are looking at. Round counts on handloads are unverified and we ask you to count at pickup. RELOADING COMPONENTS Bullets by the box and by the case. Barnes TSX and X, Nosler Partition and Ballistic Tip, Sierra MatchKing and GameKing, Hornady, Speer, Berger and Woodleigh in .224, 6mm, .264, 7mm, .308, .323, .338 and handgun diameters. Brass in quantity, primers, wads, shot and powder measures. Standouts include lot 2036, a 22-250 Remington brass and Barnes TSX grouping, lot 1014 with fourteen boxes of .308 bullets, lot 1019 in 7mm Remington Magnum, lot 2035 with twenty-one boxes of .224 bullets, and lot 1097 with eleven boxes of 8mm Barnes X and Nosler. DIES, PRESSES AND BENCH EQUIPMENT More than seventy die lots, and we put the caliber in the title of every one of them so you can find what fits your rifle. RCBS, Lee, Lyman, Hornady and Pacific in everything from .32 S and W Long to .400 Cor-Bon, including 7mm STW, 6.5-06, .223 WSSM, .270 WSM and 8mm Remington Magnum. Three shotshell presses: two MEC Sizemasters, lots 1509 and 1511, and a first generation Lee Load-All in 12 gauge, lot 1510. Three scales including an RCBS 5-0-2 and a Lee Safety, a Frankford Arsenal case tumbler, case trimmers, primer tools and a Chrony chronograph. BARRELS, PARTS AND FIREARM ACCESSORIES Lot 2500 holds five rifle barrels: a Remington 25-06, a stainless 7mm Remington Magnum with a ported brake, a Savage pattern .243 Winchester, a Douglas blank chambered by a gunsmith in 2002, and a Ruger rimfire barrel. Lot 2501 is a substantial parts lot of stocks, forends and hardware. Add gun cleaning equipment, hard cases, shooting rests, an Argentine Model 1891 sword bayonet by Weyersberg Kirschbaum of Solingen in lot 1093, trail cameras, game calls and optics accessories. TOOLS, CAMP AND HUNTING GEAR A full shop of Craftsman, Channellock, Milwaukee, SKIL and Chicago Pneumatic hand and power tools. Two Keuffel and Esser and Brunson surveying instruments. Coleman lanterns and camp stoves, coolers, cots, chairs, sleeping bags, a pop-up blind and a ground blind. Hunting apparel in named sizes from Carhartt, Duxbak, Walls, L.L. Bean, Eddie Bauer, Frogg Toggs and Cabela's, including insulated coveralls, bibs, vests and waders. HOW WE CATALOGED THIS SALE Every lot in this auction was written from its own photographs. We counted items from a single wide photograph of each lot rather than adding up close-ups, because a close-up of the same item photographed twice is not two items. Where a lot could not be counted with confidence we said so instead of guessing. Where a box label did not match its contents we said that too. Every lot carries an estimated value researched against recent sold prices, not asking prices. We would rather you bid with your eyes open. TERMS PREVIEW: [INSERT PREVIEW DATE AND TIME] PICKUP: [INSERT PICKUP DATES AND HOURS] LOCATION: Crawford Auction Service warehouse, Clinton, Missouri. [INSERT STREET ADDRESS] All items sell as-is, where-is, with no warranty expressed or implied. Photographs are the most accurate description of each lot. Written descriptions are a guide only and may contain errors. Please review all photographs before bidding. All sales are final. Smokeless powder and black powder are pickup only and will not be shipped. Loaded ammunition may ship by ground where lawful. Buyer is responsible for compliance with all applicable local, state and federal laws regarding the purchase, possession, storage and transport of ammunition and propellants. Buyer must be of legal age. Handloaded ammunition in this sale was loaded by the late Jack Ferguson. It was not commercially manufactured, has not been tested, and is sold for component and collector value. The buyer assumes all risk of use. Payment is due at the close of the auction. Lots not removed within the stated pickup window may be considered abandoned. Questions, condition reports and powder weights: call Chase Crawford at 417-399-1904 or email chase@CrawfordAuctionService.com Crawford Auction Service. Trusted in Missouri since 1944.

500
Barronett Prowler 350 Pop Up Hunting Blind
One Barronett Blinds Prowler 350 pop up hub hunting blind in a woodland camouflage pattern, shown set up on the warehouse floor along with its black Barronett carry bag. A hub blind pulls open from the center, so one person can set it up in a couple ...

501
Frigidaire Gallery GLFC1526FWA Chest Freezer
One Frigidaire Gallery white chest freezer, model GLFC1526FWA, serial WB34768710, built 11-13 by Electrolux Home Products and assembled in the USA. The data plate reads 115 volts, 5.0 amps, 60 hertz and 6.0 ounces of R134a refrigerant, type C15. Frig...

502
Coleman 9400 Series Two Burner Propane Stove
One Coleman propane camp stove, 9400 series, two burner, in its padded black Coleman carry bag with the printed operating instruction sheet in a plastic sleeve. The stove folds into a flat case with a lid and two side wind baffles that swing out to b...

503
Set of 2 Black Steel Stacking Banquet Chairs
Two matching stacking banquet chairs with black powder coated steel frames and black padded vinyl seats and oval backrests. Chairs of this pattern are the standard church hall and fire hall chair, built to stack several high against a wall so a room ...

1000
Craftsman 19.2V EX Cordless 3 Tool Combo Kit
A Craftsman 19.2 volt EX cordless combo kit in its black plastic case. The lot holds (1) a 5-1/2 inch trim saw, model 315.114260, (2) a 1/2 inch drill driver, model 315.114480, (3) a 19.2 volt nailer and stapler, (4) a one hour charger, (5) two batte...

1001
Pittsburgh Jumbo Metric Socket Set 19-50mm 20 Pc
A Pittsburgh 20 piece jumbo socket set, 3/4 inch drive, in its blow molded case. The case lid is printed 20 PIECE JUMBO SOCKET SET, 3/4 IN. DRIVE, 19-50 MM. Note that this is a metric set, not SAE. The tray holds sixteen 12 point chrome sockets plus ...

1002
Keuffel and Esser Surveyor Transit and Tripod
An antique Keuffel and Esser Co. surveyor's transit, serial 109463, in its fitted wood carrying case with brass corners, a hinged door and a leather shoulder strap. The instrument has the black japanned finish with polished brass fittings, a telescop...

1003
Brunson Surveyors Level with Dietzgen Tripod
A Brunson surveyor's level, serial 638924, marked with patent numbers 2208014 and 2329978 and engraved LAWHON on the telescope barrel. It comes in its original dovetailed wood case with the Brunson oval branded into the lid, a leather carry strap, a ...

1004
Shooting Chrony F-1 Chronograph Tripod and Case
A Shooting Chrony chronograph outfit in a shop built aluminum carrying box. The lot holds (1) the green sheet metal Chrony sensor body with the Model F-1 readout unit, (2) six cream colored plastic diffuser brackets, (3) four metal skyscreen support ...

1005
115 Piece Jobber Drill Bit Set in Metal Index
A jobber length drill bit index in a gray steel case with a hinged lid, laid out in the 115 piece pattern that covers number drills 1 through 60, letter drills A through Z and fractional sizes from 1/16 to 1/2 inch. The printed charts inside the lid ...

1006
BSA Optics Bore Sighter Kit with 15 Arbors
A BSA Optics multi caliber bore sighter kit in its molded black case. The kit holds the bore sighter body with its magnetic mount and fifteen steel arbors, one for each bore size. The arbor pockets in the case are marked .177, .22, 6mm, .25, 6.5mm, ....

1007
Craftsman 15 Pc SAE Combination Wrench Set USA
A Craftsman 15 piece standard combination wrench set, item 44185, 12 point box end, made in the USA, with its original cardboard box. The box lists the sizes as 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 and 1-1...

1008
Dremel Moto-Tool 395 Variable Speed Kit 3950
A Dremel Moto-Tool Kit 3950 built around the Model 395 Type 4 variable speed rotary tool, rated 5,000 to 30,000 RPM at 1.15 amps with a ball bearing motor. The lot includes the tool in its gray plastic carrying case, the original cardboard box, the D...

1009
Turner Propane Torch Kit and Soldering Tool Lot
A Turner propane torch kit with a group of plumbing and soldering accessories. The blue steel Turner case holds the printed Turner Propane Torch operating instructions, a coil of solder wire and a putty knife. Laid out with it are (1) a brass torch v...

1010
SKIL 9215 8.5 Amp Reciprocating Saw with Manual
One SKIL reciprocating saw, model 9215, with its operating and safety instruction booklet. The rating label reads 120 volts, 60 hertz, 8.5 amps, 800 to 2700 strokes per minute and a 1-1/8 inch, 28.5 mm stroke, part F012921500, built by Bosch Tool Cor...

1011
38 Special 357 Bullets Brass and Reloads Lot
Six boxes of 38 caliber and 357 diameter handgun components and reloads. It holds (1) a Speer 180 grain .357 TMJ box with about seven bullets, (2) a Hornady .357 125 grain HP XTP box, number 35710, with about twenty bullets, (3) a Missouri Bullet Com...

1012
30 Cal 308 Bullets 18 Boxes Sierra Speer Nosler
Eighteen boxes of 30 caliber .308 diameter rifle bullets, stacked in nine pairs for the group shot. Labels read Hornady 170 grain FP number 3060, Sierra 180 grain Spitzer number 2150, Barnes XLC 180 grain X number 30858, two boxes of Hornady 165 grai...

1013
30 Cal 308 Bullets 13 Boxes Hornady Sierra Speer
Thirteen boxes of 30 caliber .308 diameter rifle bullets. Labels read Hornady 220 grain round nose number 3090, Hornady 190 grain BTSP number 3085, Hornady 190 grain BTHP number 3085, Speer Grand Slam 165 grain number 2038, Hornady 165 grain BTSP num...

1014
30 Cal 308 Bullets 14 Boxes Hornady Nosler Barnes
Fourteen boxes of 30 caliber .308 diameter rifle bullets, and this is the premium group in the block. Six of the boxes are Hornady Interlock with the factory holographic wrap and old shop price tags still attached, reading 150 grain SP number 3031 at...

1015
Pyrodex Triple Seven Pellets and 50 Cal Sabots
Four containers of muzzleloading supplies. The lot holds (1) a Hodgdon Pyrodex Pellets 50/50 case, 100 pre formed charges, net weight 8.57 ounces, (2) a Hodgdon Triple Seven case, 100 pre formed pellets 50/50, net weight 6.9 ounces, (3) a Thompson Ce...

1016
44 Caliber and 22 Caliber Bullets Lot 4 Boxes
Four boxes of handgun and rifle bullets. The lot holds (1) an E and E Lead Products extra hard cast match grade box marked 44 240g SWC, nearly full of 240 grain hard cast semi wadcutters with red lube grooves, hand priced $49.95, (2) a Hornady Bullet...

1017
41 Cal 410 Dia 210 Grain Bullets Hornady Sierra
Two boxes of 41 caliber .410 diameter 210 grain pistol bullets for the 41 Remington Magnum. The lot holds (1) a Hornady box, 100 count, number 41000, 41 Cal 210 Gr .410 hollow point XTP, lot 94-037, with the red FACTORY SEALED FOR YOUR PROTECTION tap...

1018
32 Caliber 95 Grain Cast Performance FNPB Bullets
One box of Cast Performance Bullet Company LBT style heat treated solids, marked 32/95 gr. FNPB, .312 diameter, 100 count. The box is opened and partial and holds a working quantity of heat treated cast flat nose plain base bullets with blue lube in ...

1019
7mm Remington Magnum Bullets and Brass 14 Boxes
Fourteen boxes of 7mm .284 diameter components. Thirteen hold bullets and one holds brass. Labels read two boxes of Sierra 120 grain Spitzer number 1900, Barnes 160 grain flat base X number 28446, Barnes 140 grain boattail X number 28444, Speer Grand...

1020
8mm 323 Rifle Bullets Lot 16 Boxes Sierra Nosler
Sixteen boxes of 8mm .323 diameter rifle bullets. Labels read Sierra 220 grain Spitzer boat tail number 2420, a second Sierra 8mm box, Nosler Ballistic Tip 180 grain Spitzer number 32180, Hornady 220 grain SP number 3238 quantity 100, Hornady 170 gra...

1021
Bulk Jacketed Soft Point Rifle Bullets Carton
One carton of bulk jacketed rifle bullets. The carton is a reused shipping box with red marker writing across the tape that reads in part No Lubricant and a price of twenty five cents. Inside are sealed plastic bags holding a large quantity of copper...

1022
Lee 400 Cor-Bon 3 Die Set and Factory Crimp Die
A Lee reloading die set for the 400 Cor-Bon in the red Lee storage box, plus a separate Lee Factory Crimp Die for the same cartridge. The red box holds the three die set with its shell holder, and alongside it are the loose Factory Crimp Die, two cle...

1023
Lee 30-30 Winchester 3 Die Set with Factory Crimp
A Lee reloading die set for the 30-30 Winchester, item 90506, in the red Lee storage box with the clear lid. The set is three dies, being a full length sizing and decapping die, a bullet seating die and the Lee Factory Crimp Die, along with the shell...

1024
Lee 44 Magnum Carbide 4 Die Set 90512
A Lee carbide reloading die set for the 44 Remington Magnum, item 90512, in the red Lee storage box. The set is four dies, being a carbide full length sizing and decapping die, a powder through expanding die, a bullet seating die and the Lee Factory ...

1025
Lee 338 Winchester Magnum Collet 2 Die Set 90721
A Lee collet die set for the 338 Winchester Magnum, item 90721, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, with the printed instruction sheet. The box label gives th...

1026
Lee 8mm Remington Magnum Factory Crimp Die
One Lee Factory Crimp Die in the red Lee storage box with the printed Lee Factory Crimp Die instruction sheet, a small yellow plastic accessory and the box lid. The instruction sheet is hand marked 8mm Rm for 8mm Remington Magnum. The collet fingers ...

1027
Lee 25-06 Remington Collet 2 Die Set 90711
A Lee collet die set for the 25-06 Remington, item 90711, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and t...

1028
Lee 357 SIG 3 Die Set with Shell Holder
A Lee reloading die set for the 357 SIG in the red Lee storage box. The set is three dies, being the carbide sizing and decapping die, the powder through expanding die and the bullet seating die, with the shell holder and the printed Lee instruction ...

1029
Lee 7mm Remington Magnum 2 Die Set Shell Holder
A Lee reloading die set for the 7mm Remington Magnum in the red Lee storage box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder, a yellow plastic accessory and the printed Lee ins...

1030
Lee 7mm STW Shooting Times Westerner 2 Die Set
A Lee reloading die set for the 7mm Shooting Times Westerner in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, a sizing die and a seating die, along with a spare lock ring. One die body is stamped 7MM STW. The 7...

1031
Lee 7mm Remington Magnum Factory Crimp Die 90821
One Lee Factory Crimp Die for the 7mm Remington Magnum, item 90821, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set. A Factory Crimp Die works differently from the crimp built into...

1032
Lee 7mm STW Factory Crimp Die 90869
One Lee Factory Crimp Die for the 7mm Shooting Times Westerner, item 90869, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set, and the die body is stamped 7MM STW. The 7mm STW is an ...

1033
RCBS 9mm Luger 3 Die Set 20504 with Shell Holder
An RCBS three die set for the 9mm Luger, part number 20504, in the green RCBS box with the yellow end label. The set is three dies, being the sizing and decapping die, the expander die and the bullet seating die, along with an RCBS shell holder and a...

1034
Hornady 6.5-06 Custom Grade 2 Die Set 546280
A Hornady Custom Grade New Dimension two die set for the 6.5-06, Series IV, full length, item 546280, in the red Hornady box with the foam insert. The end label calls for shell holder number 1. The set is two dies, being the full length sizing die an...

1035
RCBS 270 Winchester 2 Die Full Length Set 13501
An RCBS full length two die set for the 270 Winchester, part number 13501, group A, in the green RCBS box. The end label calls for shell holder number 3. The set is two dies, being the full length sizing and decapping die and the bullet seating die, ...

1036
RCBS 380 Auto 3 Die Carbide Taper Crimp Set
An RCBS three die carbide taper crimp set for the 380 Auto, part number 20415, group B, in the gray RCBS storage box. The end label calls for shell holder number 10. The set is three dies, being the carbide sizing and decapping die, the expander die ...

1037
RCBS 38-40 Winchester 3 Die Set Vintage Box
An RCBS three die set for the 38-40 Winchester in the old yellow and green RCBS cardboard box printed RELOADING IS FUN. The set is three dies wrapped in tissue paper, and the sizing die body is stamped RCBS 38-40 F.L. for full length. An old ink pric...

1038
RCBS 45 ACP Carbide Sizer and Seater Die Pair
Two RCBS dies for the 45 ACP in the gray RCBS storage box that is labeled as a three die carbide taper crimp set, part number 20415 style packaging, with the end label calling for shell holder 03. Read this before bidding. Only two of the three dies ...

1039
Lee 429 Bullet Lubricating and Sizing Kit Die
A Lee bullet lubricating and sizing kit for .429 inch bullets in the red Lee storage box with the printed instruction sheet. The sizing die is stamped LEE-429-B6. The lot is the one die plus the box and the sheet. A Lee sizing kit is what a cast bull...

1040
Lee 300 Winchester Magnum 3 Die Set 90539 Crimp
A Lee reloading die set for the 300 Winchester Magnum, item 90539, in the red Lee storage box with an old shop price sticker of $21.00 on the lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the L...

1041
Lee 22-250 Remington 3 Die Set with Crimp 90503
A Lee reloading die set for the 22-250 Remington, item 90503, in the red Lee storage box with the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp D...

1042
Lee 338 Winchester Magnum 3 Die Set 90546 Crimp
A Lee reloading die set for the 338 Winchester Magnum, item 90546, in the red Lee storage box with a shop inventory sticker on the lid and the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the b...

1043
Lee 243 Winchester Collet 2 Die Set 90709
A Lee collet die set for the 243 Winchester, item 90709, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and th...

1044
RCBS Case Trimmer Collet No 3 and 30 Cal Pilot
An RCBS case trimmer collet, No. 3, part number 09373, in its green RCBS box, together with a case trimmer pilot stamped 30 for the .308 inch bore. An old C R Specialty price sticker of $4.00 is on the box. The collet is the part that grips the case ...

1045
Lee 243 Winchester 3 Die Set 90504 Factory Crimp
A Lee reloading die set for the 243 Winchester, item 90504, in the red Lee storage box with the clear lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp Die, plus the shell hol...

1046
Lee 32 Smith and Wesson Long Carbide 4 Die Set
A Lee carbide four die set for the 32 Smith and Wesson Long in the red Lee storage box. The packaging card in the lid lists the contents as a steel shell holder and powder measure, a carbide sizing die, a bullet seating and feeding die and a carbide ...

1047
Lee 223 WSSM 2 Die Set 90446 with Shell Holder
A Lee reloading die set for the 223 Winchester Super Short Magnum, item 90446, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, together with the shell holder, a yellow 2.8 c...

1048
Lee 270 WSM 2 Die Set 90572 with Shell Holder
A Lee reloading die set for the 270 Winchester Short Magnum, item 90572, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder and the printed Lee instructio...

1049
Lee 8mm Remington Magnum 2 Die Set 90775
A Lee reloading die set for the 8mm Remington Magnum, item 90775, in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, being the full length sizing and decapping die and the bullet seating die. The die bodies are s...

1050
Lee Universal Decapping Die 90292 in Red Box
One Lee Precision Universal Decapping Die, part number 90292, in the original red box with the factory instruction sheet. The die body is stamped LEE DECAPPER H2 and wears a hex lock ring. A universal decapper does one job and does it in any caliber....

1051
Lee 25-06 Remington Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 25-06 Remington, part number 90836 on the box end, packed in the original red box with the factory instruction sheet. This is the collet style rifle crimp die that Lee is known for. Four hardened fingers close ...

1052
Bystrom 44 Magnum 3 Die Pistol Set in Box
A vintage three piece pistol die set in 44 Magnum from Bystrom, sold through Minnesota Shooters Supply of Minneapolis. The box label reads 3 PIECE PISTOL DIES CALIBER 44 MAG. The set holds a sizing die stamped 44 SIZER, an expanding die and a bullet ...

1053
RCBS 30-06 Springfield 2 Die Set Green Box
An RCBS Precisioneered two die set for 30-06 Springfield in the old green cardboard box with the caliber written on the end label and an original price sticker of $13.50. The two dies are wrapped in factory paper. One is the full length sizing die wi...

1054
RCBS 30-06 Springfield 2 Die Full Length Set
An RCBS full length die set for 30-06 Springfield, Group A, in the green plastic Omark era box with the original instruction sheet and a price tag of $18.00. The set holds the full length sizing die with its decapping rod and expander ball and the bu...

1055
Redding 6.5mm-06 Seating Die 92378 Series C
A Redding Series C seating die for the 6.5mm-06 wildcat, part number 92378, in the original Redding box. The die body is stamped REDDING 6.5-06 and the box end reads SEAT DIE SERIES C 6.5MM 06. The lot also holds a micrometer style seating adjustment...

1056
RCBS 45 Colt Carbide 3 Die Set 19112
An RCBS carbide three die set for 45 Colt, part number 19112, Group B, in the gray RCBS box that calls for shell holder number 20. Four die bodies are present. There is a carbide sizing die stamped 45 COLT, an expanding die, a seating die stamped COL...

1057
Hornady 30-30 Winchester 2 Die Set 546342
A Hornady Custom Grade New Dimension two die full length set for 30-30 Winchester, item number 546342, Series I, calling for shell holder number 2. The red box holds the full length sizing die with the Hornady Zip Spindle decapping assembly, the bull...

1058
RCBS 6.5 Creedmoor 2 Die Full Length Set
An RCBS full length die set for 6.5 Creedmoor, part number 32901, Group D, calling for shell holder number 3. The green box holds the full length sizing die and the bullet seating die, both stamped RCBS 6.5 CRDMR, along with the printed instruction s...

1059
RCBS 380 Auto Taper Crimp Seater Die 20462
One RCBS taper crimp seating die for 380 Auto, part number 20462, Group B, calling for shell holder number 10. The die body is stamped RCBS 380 AUTO T slash C. It comes in the green RCBS box with the printed instruction sheet. A taper crimp die is th...

1060
Lyman 38 Special 357 Magnum Carbide Sizer Die
A Lyman All American carbide sizing die for 38 Special and 357 Magnum, part number 7590179, in the orange Lyman box marked CARBIDE SIZER and DELUXE SIZING DIE 357 38. The die is still in its factory paper wrap and comes with a lock ring, a small Alle...

1061
Lee 243 Winchester Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 243 Winchester, part number 90819, in the original red box with the factory instruction sheet. This is the collet style rifle crimp die. Four hardened steel fingers squeeze the case mouth inward from the outsid...

1062
Lee 6mm Remington Factory Crimp Die 90832
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet. The collet crimp design uses four hardened fingers that close on the case mouth from the outside, so the crimp is un...

1063
Lee 6mm Remington Factory Crimp Die in Red Box
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet and the barcode label intact on the end. A factory crimp die is the last die in the sequence. After the bullet is sea...

1064
Lee Universal Case Expanding Die in Box
One Lee Precision Universal Case Expanding Die in the original box with the factory instruction sheet. The die body is stamped LEE EXPNDR A9. Lee describes it as a tapered expander that will flare any case from 22 caliber through 45 caliber. This is ...

1065
Lee Hand Priming Tool Shell Holder Set of 11
A Lee Precision shell holder set for the Lee Auto Prime and hand priming tools, red plastic tray, part number SH3571. Eleven shell holders are present and one well in the twelve place tray is empty. The holders carry the Lee numbers 1, 2, 3, 4, 5, 7,...

1066
RCBS 6mm Remington 2 Die Full Length Set
An RCBS full length die set for 6mm Remington, Group A, in the green RCBS box with the part number T1501 on the end label. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die with an adjustable...

1067
RCBS 243 Winchester 2 Die Set 11401 Green Box
An RCBS full length die set for 243 Winchester, part number 11401, Group A, calling for shell holder number 3, in the green Omark era box with the reloading data card. The set holds the full length sizing die with its decapping rod and expander ball ...

1068
Lyman 357 Magnum 3 Die Pistol Set in Box
A Lyman All American three die pistol set for 357 Magnum, part number 7462309, in the orange Lyman box. The end label reads 3 DIE PISTOL 357 MAG and carries a shop marking of USED $13.00. Three dies are present, a sizing die, an expanding die and a b...

1069
RCBS 22-250 Remington 2 Die Full Length Set
An RCBS full length die set for 22-250 Remington, part number 10601, Group A, in the green RCBS box. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die, which is stamped SEAT on the body. Also...

1070
RCBS 8mm Remington Magnum 2 Die Set 16001
An RCBS full length die set for 8mm Remington Magnum, part number 16001, Group A, calling for shell holder number 4, in the green RCBS box. An old Carls Gun Shop price tag of $25.95 is still on the lid. The set holds the full length sizing die with i...

1071
RCBS 25-06 Remington 2 Die Full Length Set
An RCBS full length die set for 25-06 Remington, part number 12001, Group A, in the green RCBS box with the printed reloading data card and a red price sticker of $10.00. Both dies are stamped RCBS 25-06. The set holds the full length sizing die with...

1072
RCBS 40 SW 10mm Auto Carbide 3 Die Set 22115
An RCBS three die carbide taper crimp set for 40 Smith and Wesson and 10mm Auto, part number 22115, Group B, calling for shell holder number 27, in the gray RCBS box. The set holds the carbide sizing die, the expanding die and the taper crimp seating...

1073
RCBS 264 Neck Expander Die 39811 with Plug
An RCBS neck expander die for 264 caliber, part number 39811, in the green RCBS box. The label has 308 added by hand in blue marker. The die body is stamped EXP BODY 11 and is fitted with an expander plug marked 264. A second loose expander plug is i...

1074
RCBS 6.5mm-06 2 Die Full Length Set 27801
An RCBS full length die set for 6.5mm-06, part number 27801, Group D, calling for shell holder number 3, in the green RCBS box. Both dies are stamped RCBS 6.5-06. The set holds the full length sizing die with its decapping rod and expander ball and t...

1075
RCBS 308 Winchester 3 Die Set and Primer Tool
A 308 Winchester die group in an RCBS green box marked FL DIE SET 308 WIN, part number 15501, Group A, shell holder number 3, with a handwritten price of $36.50. Three dies are present. Two are RCBS and are stamped RCBS 308 WIN, the full length sizer...

1076
RCBS 38 Special SWC 3 Die Set 18306 Group B
An RCBS three die set for 38 Special with a semi wadcutter seating plug, part number 18306, Group B, in the green RCBS box. An old Maywood Sports store sticker is on the lid. Three dies are present, a sizing die stamped 38 SIZE, an expanding die and ...

1077
44 Caliber Bullet Lot 4 Boxes 240 and 255 Gr
Four containers of 44 caliber bullets from the Ferguson bench. The lot holds (1) a Speer box of 44 caliber 240 grain 429 diameter soft points, number 4457, with roughly a dozen bullets left, (2) a Montana Bullet Works box of 44 Magnum Authentic Keith...

1078
Hornady XTP and Cast 45 Colt Bullets 2 Boxes
Two boxes of 45 caliber bullets. The first is a Hornady box of 45 caliber 250 grain XTP hollow points, item 45200, 452 inch diameter, quantity 100, with 45 COLT written on the lid in marker and an old green price dot of $37. The bullets are still in ...

1079
Sierra 30-30 125 Gr Flat Nose HP 2 Boxes
Two Sierra boxes of 30-30 caliber rifle bullets, 308 diameter, 125 grain flat nose hollow point, Pro Hunter, item number 2020, marked 100 rifle bullets on the label. Both boxes have been opened and are partly used. Each one holds roughly two dozen bu...

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Ferguson Family Ammo, Reloading, and Outdoor Supplies
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Sep 22
Bidding Ends: Sunday Oct 4
Sale Location
116 E. Oak
Clinton, MO 64735
Listing Terms and Conditions
Terms and Conditions Bidder and Auctioneer agree that the terms listed below shall govern each online auction sale. REGISTRATION: All information provided by bidder during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. OzarkBid.com, at its sole discretion, may deny registration to any person or entity. BUYER'S PREMIUM: Unless a specific auction states otherwise, a 15% buyer's premium will be charged on all items and lots. AGREEMENT TO TERMS: Access and use of any online auction site of OzarkBid.com (the 'Site') is subject to all specific terms and conditions set forth on any individual page within the Site and the terms and conditions of this User Agreement and all applicable laws and regulations, including but not limited to copyright and trademark laws. BY ACCESSING THIS SITE, YOU AGREE TO ACCEPT, WITHOUT LIMITATION OR QUALIFICATION, ALL OF THE TERMS AND CONDITIONS OF THE SITE USER AGREEMENT and to comply with all applicable laws, statutes, ordinances and regulations regarding your use of the Site. OzarkBid.com reserves the right to change the terms and conditions of the User Site Agreement from time to time, and it is the Bidder's responsibility to review any and all changes made to these terms and conditions prior to each use of the Site. By using the Site, you agree in advance to accept any such changes. SUSPENSION / PERMANENT BAN: A Bidder will be suspended or permanently banned from the Site for providing false or fraudulent information when registering. A Bidder will be permanently banned from this Site for failing to honor an auction bid made under that Bidder's bid number. PAYMENT: Buyer will receive an invoice via electronic mail after the close of the auction. Payment for purchases must be made by cash, Visa, MasterCard, or Discover, unless otherwise noted in a specific auction's terms and conditions. Any item or lot not paid for in full by the stated deadline will resort to suspension or permanent ban of bidder number. Ownership of your items will revert to Owner/Seller who may re-sell or dispose of items at Seller's discretion SALES TAX: All sales are subject to appropriate state Sales Tax laws. If Bidder claims an exemption from sales tax, it is the Bidder's responsibility to provide the appropriate resale or exemption certificate for each auction at which the Bidder makes a purchase. ITEM DESCRIPTIONS: The descriptions of items or lots appearing in the auction and in advertising are believed to be correct. Nevertheless, neither those descriptions nor any oral statements made by Owner/Seller or OzarkBid.com concerning any items or lots shall be construed as a warranty either express or implied. ITEMS AND LOTS ARE SOLD AS IS - WHERE IS and WITH ALL FAULTS. Bidder acknowledges that all items and lots were available for inspection prior to the auction and, by these terms, OzarkBid.com and Owner/Seller strongly encouraged Bidder to carefully inspect each item or lot to determine the nature, quality, condition, quantity and size of the item or lot. Bidder relied solely on personal inspection and not on information listed on the Site or otherwise provided by OzarkBid.com or Owner/Seller. The IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE SPECIFICALLY EXCLUDED from this sale and transaction and shall NOT apply to the merchandise that is the subject of these sales. OzarkBid.com does not have control over the items or lots that are posted in the Site, and cannot guarantee the authenticity and quality of said product. Auctioneer is not responsible for the actions the Sellers and Buyers take before, during, and after the auction. Use of this site is at your own risk. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. ALL AUCTIONS WITH RESERVE: All auctions of OzarkBid.com are with reserve. Per the Auctioneer an auction "with reserve" is one in which the seller or his agent reserves the right to establish a minimum bid, accept or reject any and all bids, and withdraw the property at any time prior to the announcement of the completion of the sale by the auctioneer. Sellers reserve the right to bid on all auctions. Auctioneers and their employees reserve the right to bid on their own or the Seller's behalf. REMOVAL: Merchandise becomes the full responsibility of Buyer at the close of auction, and Buyer assumes all risk of loss and damage to property until removed from sale premises. The date by which all merchandise must be removed from the premises is posted on an auction-by-auction basis. THERE ARE NO EXCEPTIONS TO REMOVAL DEADLINES!! Bidders who fail to pick up purchases by the removal deadline will incur storage fees in the amount of $10.00 per week per item. Items remaining 30 days after removal deadline will be considered as abandoned, and ownership will revert to Seller, who may resell or dispose of items. Any funds paid will be forfeited for failure to abide by the terms of sale. ADJUSTMENTS: No adjustment will be made with regard to merchandise inventory after the item or lot has been removed from the sale premises, or after the removal deadline whether or not the property has been removed. OzarkBid.com reserves the right, for any reason, in its sole discretion, to terminate, change or suspend any aspect of the auction sale. DISPUTE BETWEEN BIDDERS: The final high bidder shall be designated at the end of each item or lot. If a dispute arises between two or more Bidders, OzarkBid.com reserves the right to reopen bidding. OzarkBid.com's designation of the Buyer shall be final. INDEMNITY: Bidder accepts responsibility for and agrees to indemnify, defend and hold harmless each Owner/Seller and OzarkBid.com and their employees, governing body, officers, owners, affiliates, subsidiaries, directors, agents and representatives from and against any and all claims, losses, damages, liabilities, judgments, fees, costs and expenses (including reasonable attorneys' fees and expenses) related to, arising from or associated with Buyer's, his agents or representatives, use of the Site, including but not limited to personal injuries or property damage incurred on the sale premises or during removal and transport of any auction items or lots, and arising out of, based upon, or resulting from any breach or violation by Bidder of this Site User Agreement or any use by Bidder of the Site or as a result of a dispute with another Bidder. TERMINATION OF AGREEMENT: This Site User Agreement constitutes a binding agreement between Bidder and OzarkBid.com until terminated by OzarkBid.com. OzarkBid.com may terminate this agreement at any time, without notice, in OzarkBid.com's sole discretion. If Bidder dissatisfaction occurs with the auction sale in any way, Bidder's only recourse is to immediately discontinue use of the auction Site. OzarkBid.com reserves the right to terminate Bidder registration and use of the auction Site, and impose limits on certain features of the auction Site or restrict Bidder's access to, or use of, part or the entire Site without notice or penalty. INTERRUPTION OF SERVICE: OzarkBid.com cannot, and will not, be held responsible for any interruption in service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the Site. Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning. OzarkBid.com, in its sole discretion, may void any sale, temporarily suspend bidding and re-sell any items or lots that were affected by any malfunction. The decision of OzarkBid.com is final. PRIVACY: OzarkBid.com gathers information about Bidders and Owner/Sellers for the purposes of conducting online auctions. OzarkBid.com does not sell or rent this information. OzarkBid.com uses electronic mail mailing lists to notify its customers about online and live auctions. If you are receiving a particular mailing and wish to discontinue receiving future mailings, simply forward the received e-mail to OzarkBid.com to have your name promptly removed from our list. BID IS A LEGAL CONTRACT: As a Bidder, placing a bid is a binding contract between you and the Owner/Seller and the bid cannot be retracted. Once you place a bid, and if you win, you will be obligated to buy the product at the said price you indicated as your bid. Placing a bid on this Site, and winning, then not paying for the product is illegal in most states, and prosecution can result. The Owner/Sellers of property sold through this Site reserve the right to reject any and all bids, in their sole discretion. NO WARRANTY ON SITE USAGE: You agree that you will not copy, reproduce, alter, modify, create derivative works, or publicly display any content from the Site without prior, express written permission of OzarkBid.com. THE SITE IS PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE WARRANTIES WHICH ARE IMPOSED BY AND INCAPABLE OF EXCLUSION, RESTRICTION OR MODIFICATION UNDER THE LAWS APPLICABLE TO THIS AGREEMENT. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. No legal advice is intended or implied by anything contained within the Site. No obligation, liability, responsibility, accountability or burden is undertaken, assumed or otherwise imposed by maintaining the Site. AUTO EXTEND FEATURE: If an auction receives a bid in the last five minutes, the ending time for that auction will automatically be extended by five minutes. Once five minutes have passed without any bidding, the item will close. This feature prevents "sniping" and allows all bidders an equal opportunity to be the high bidder if they so choose.
JACK AND PATSY FERGUSON ESTATE AUCTION Online only. Bidding closes Sunday, October 4, 2026 at 7:00 PM Central. Jack and Patsy Ferguson of Quincy, Missouri spent a lifetime outdoors. They traveled the world hunting, and Jack was a handloader of the old school, the kind who bought good components when he saw them and kept a bench stocked deep enough to ride out any shortage. Jack has passed away and Patsy is downsizing. What follows is that bench, that gun room and that camp, offered in 355 lots. This is one of the deepest reloading estates we have handled. If you load your own, clear your calendar for this one. Everything sells from our auction warehouse in Clinton, Missouri. SMOKELESS POWDER AND PROPELLANTS Lots 3001 through 3025 are an extraordinary run of canister powders covering nearly every burn rate a handloader uses. Hodgdon Varget, H4895, H4350, H4831 and H4831SC, H414, H380, H335, H1000, Retumbo, BL-C(2), Benchmark, Lil Gun, Longshot, Universal, CFE Pistol, CFE BLK, Hybrid 100V, Trail Boss, Titegroup and H110. IMR 3031, 4064, 4198, 4227, 4350, 4831, 4895, 7828 and the Enduron series. Alliant Reloder 15, 19, 22, 23 and 25, plus Unique, Bullseye, Blue Dot, 2400, Power Pistol and AR-Comp. Winchester 748, 760, 296, 540 and 231. Accurate, Ramshot, VihtaVuori and Norma. Older Hercules and DuPont cans as well. Lot 3009 includes GOEX FFFg true black powder. Read this carefully. Every powder container in this sale is partial and was opened by Jack during his loading. None is a sealed full pound. We did not weigh them. If you want to know how much is left in a particular container before you bid, call 417-399-1904 and we will weigh it and tell you. Powder is pickup only and will not be shipped under any circumstances. AMMUNITION Roughly sixty lots of ammunition across an unusual spread of chamberings: 22-250 Remington, .223 Remington, .243 Winchester, 6mm Remington, 6.5 Creedmoor, .308 Winchester, 30-30 Winchester, 30-06, .220 Swift, 7mm Remington Magnum, 8mm Remington Magnum, .300 Winchester Magnum, .338 Winchester, .38-40 Winchester, .25 ACP, .32 H and R Magnum, .38 Special, .357 Magnum, .357 SIG, .40 S and W, .41 Remington Magnum, .44 Magnum, .45 Auto, .45 Colt, 9mm Luger, .22 rimfire, and 12, 16 and 410 gauge shotshells. Be clear about what most of this is. Jack was a handloader and the large majority of the loaded ammunition in this sale was loaded by him, not by a factory. We have said so on every lot where that is the case. Those rounds were not commercially manufactured, they have not been tested, and they are sold for component and collector value with the buyer assuming all risk of use. A handful of lots are genuine sealed factory ammunition and we have said that too. Where case heads were visible we read and published the headstamps so you know what you are looking at. Round counts on handloads are unverified and we ask you to count at pickup. RELOADING COMPONENTS Bullets by the box and by the case. Barnes TSX and X, Nosler Partition and Ballistic Tip, Sierra MatchKing and GameKing, Hornady, Speer, Berger and Woodleigh in .224, 6mm, .264, 7mm, .308, .323, .338 and handgun diameters. Brass in quantity, primers, wads, shot and powder measures. Standouts include lot 2036, a 22-250 Remington brass and Barnes TSX grouping, lot 1014 with fourteen boxes of .308 bullets, lot 1019 in 7mm Remington Magnum, lot 2035 with twenty-one boxes of .224 bullets, and lot 1097 with eleven boxes of 8mm Barnes X and Nosler. DIES, PRESSES AND BENCH EQUIPMENT More than seventy die lots, and we put the caliber in the title of every one of them so you can find what fits your rifle. RCBS, Lee, Lyman, Hornady and Pacific in everything from .32 S and W Long to .400 Cor-Bon, including 7mm STW, 6.5-06, .223 WSSM, .270 WSM and 8mm Remington Magnum. Three shotshell presses: two MEC Sizemasters, lots 1509 and 1511, and a first generation Lee Load-All in 12 gauge, lot 1510. Three scales including an RCBS 5-0-2 and a Lee Safety, a Frankford Arsenal case tumbler, case trimmers, primer tools and a Chrony chronograph. BARRELS, PARTS AND FIREARM ACCESSORIES Lot 2500 holds five rifle barrels: a Remington 25-06, a stainless 7mm Remington Magnum with a ported brake, a Savage pattern .243 Winchester, a Douglas blank chambered by a gunsmith in 2002, and a Ruger rimfire barrel. Lot 2501 is a substantial parts lot of stocks, forends and hardware. Add gun cleaning equipment, hard cases, shooting rests, an Argentine Model 1891 sword bayonet by Weyersberg Kirschbaum of Solingen in lot 1093, trail cameras, game calls and optics accessories. TOOLS, CAMP AND HUNTING GEAR A full shop of Craftsman, Channellock, Milwaukee, SKIL and Chicago Pneumatic hand and power tools. Two Keuffel and Esser and Brunson surveying instruments. Coleman lanterns and camp stoves, coolers, cots, chairs, sleeping bags, a pop-up blind and a ground blind. Hunting apparel in named sizes from Carhartt, Duxbak, Walls, L.L. Bean, Eddie Bauer, Frogg Toggs and Cabela's, including insulated coveralls, bibs, vests and waders. HOW WE CATALOGED THIS SALE Every lot in this auction was written from its own photographs. We counted items from a single wide photograph of each lot rather than adding up close-ups, because a close-up of the same item photographed twice is not two items. Where a lot could not be counted with confidence we said so instead of guessing. Where a box label did not match its contents we said that too. Every lot carries an estimated value researched against recent sold prices, not asking prices. We would rather you bid with your eyes open. TERMS PREVIEW: [INSERT PREVIEW DATE AND TIME] PICKUP: [INSERT PICKUP DATES AND HOURS] LOCATION: Crawford Auction Service warehouse, Clinton, Missouri. [INSERT STREET ADDRESS] All items sell as-is, where-is, with no warranty expressed or implied. Photographs are the most accurate description of each lot. Written descriptions are a guide only and may contain errors. Please review all photographs before bidding. All sales are final. Smokeless powder and black powder are pickup only and will not be shipped. Loaded ammunition may ship by ground where lawful. Buyer is responsible for compliance with all applicable local, state and federal laws regarding the purchase, possession, storage and transport of ammunition and propellants. Buyer must be of legal age. Handloaded ammunition in this sale was loaded by the late Jack Ferguson. It was not commercially manufactured, has not been tested, and is sold for component and collector value. The buyer assumes all risk of use. Payment is due at the close of the auction. Lots not removed within the stated pickup window may be considered abandoned. Questions, condition reports and powder weights: call Chase Crawford at 417-399-1904 or email chase@CrawfordAuctionService.com Crawford Auction Service. Trusted in Missouri since 1944.

500
Barronett Prowler 350 Pop Up Hunting Blind
One Barronett Blinds Prowler 350 pop up hub hunting blind in a woodland camouflage pattern, shown set up on the warehouse floor along with its black Barronett carry bag. A hub blind pulls open from the center, so one person can set it up in a couple ...

501
Frigidaire Gallery GLFC1526FWA Chest Freezer
One Frigidaire Gallery white chest freezer, model GLFC1526FWA, serial WB34768710, built 11-13 by Electrolux Home Products and assembled in the USA. The data plate reads 115 volts, 5.0 amps, 60 hertz and 6.0 ounces of R134a refrigerant, type C15. Frig...

502
Coleman 9400 Series Two Burner Propane Stove
One Coleman propane camp stove, 9400 series, two burner, in its padded black Coleman carry bag with the printed operating instruction sheet in a plastic sleeve. The stove folds into a flat case with a lid and two side wind baffles that swing out to b...

503
Set of 2 Black Steel Stacking Banquet Chairs
Two matching stacking banquet chairs with black powder coated steel frames and black padded vinyl seats and oval backrests. Chairs of this pattern are the standard church hall and fire hall chair, built to stack several high against a wall so a room ...

1000
Craftsman 19.2V EX Cordless 3 Tool Combo Kit
A Craftsman 19.2 volt EX cordless combo kit in its black plastic case. The lot holds (1) a 5-1/2 inch trim saw, model 315.114260, (2) a 1/2 inch drill driver, model 315.114480, (3) a 19.2 volt nailer and stapler, (4) a one hour charger, (5) two batte...

1001
Pittsburgh Jumbo Metric Socket Set 19-50mm 20 Pc
A Pittsburgh 20 piece jumbo socket set, 3/4 inch drive, in its blow molded case. The case lid is printed 20 PIECE JUMBO SOCKET SET, 3/4 IN. DRIVE, 19-50 MM. Note that this is a metric set, not SAE. The tray holds sixteen 12 point chrome sockets plus ...

1002
Keuffel and Esser Surveyor Transit and Tripod
An antique Keuffel and Esser Co. surveyor's transit, serial 109463, in its fitted wood carrying case with brass corners, a hinged door and a leather shoulder strap. The instrument has the black japanned finish with polished brass fittings, a telescop...

1003
Brunson Surveyors Level with Dietzgen Tripod
A Brunson surveyor's level, serial 638924, marked with patent numbers 2208014 and 2329978 and engraved LAWHON on the telescope barrel. It comes in its original dovetailed wood case with the Brunson oval branded into the lid, a leather carry strap, a ...

1004
Shooting Chrony F-1 Chronograph Tripod and Case
A Shooting Chrony chronograph outfit in a shop built aluminum carrying box. The lot holds (1) the green sheet metal Chrony sensor body with the Model F-1 readout unit, (2) six cream colored plastic diffuser brackets, (3) four metal skyscreen support ...

1005
115 Piece Jobber Drill Bit Set in Metal Index
A jobber length drill bit index in a gray steel case with a hinged lid, laid out in the 115 piece pattern that covers number drills 1 through 60, letter drills A through Z and fractional sizes from 1/16 to 1/2 inch. The printed charts inside the lid ...

1006
BSA Optics Bore Sighter Kit with 15 Arbors
A BSA Optics multi caliber bore sighter kit in its molded black case. The kit holds the bore sighter body with its magnetic mount and fifteen steel arbors, one for each bore size. The arbor pockets in the case are marked .177, .22, 6mm, .25, 6.5mm, ....

1007
Craftsman 15 Pc SAE Combination Wrench Set USA
A Craftsman 15 piece standard combination wrench set, item 44185, 12 point box end, made in the USA, with its original cardboard box. The box lists the sizes as 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 and 1-1...

1008
Dremel Moto-Tool 395 Variable Speed Kit 3950
A Dremel Moto-Tool Kit 3950 built around the Model 395 Type 4 variable speed rotary tool, rated 5,000 to 30,000 RPM at 1.15 amps with a ball bearing motor. The lot includes the tool in its gray plastic carrying case, the original cardboard box, the D...

1009
Turner Propane Torch Kit and Soldering Tool Lot
A Turner propane torch kit with a group of plumbing and soldering accessories. The blue steel Turner case holds the printed Turner Propane Torch operating instructions, a coil of solder wire and a putty knife. Laid out with it are (1) a brass torch v...

1010
SKIL 9215 8.5 Amp Reciprocating Saw with Manual
One SKIL reciprocating saw, model 9215, with its operating and safety instruction booklet. The rating label reads 120 volts, 60 hertz, 8.5 amps, 800 to 2700 strokes per minute and a 1-1/8 inch, 28.5 mm stroke, part F012921500, built by Bosch Tool Cor...

1011
38 Special 357 Bullets Brass and Reloads Lot
Six boxes of 38 caliber and 357 diameter handgun components and reloads. It holds (1) a Speer 180 grain .357 TMJ box with about seven bullets, (2) a Hornady .357 125 grain HP XTP box, number 35710, with about twenty bullets, (3) a Missouri Bullet Com...

1012
30 Cal 308 Bullets 18 Boxes Sierra Speer Nosler
Eighteen boxes of 30 caliber .308 diameter rifle bullets, stacked in nine pairs for the group shot. Labels read Hornady 170 grain FP number 3060, Sierra 180 grain Spitzer number 2150, Barnes XLC 180 grain X number 30858, two boxes of Hornady 165 grai...

1013
30 Cal 308 Bullets 13 Boxes Hornady Sierra Speer
Thirteen boxes of 30 caliber .308 diameter rifle bullets. Labels read Hornady 220 grain round nose number 3090, Hornady 190 grain BTSP number 3085, Hornady 190 grain BTHP number 3085, Speer Grand Slam 165 grain number 2038, Hornady 165 grain BTSP num...

1014
30 Cal 308 Bullets 14 Boxes Hornady Nosler Barnes
Fourteen boxes of 30 caliber .308 diameter rifle bullets, and this is the premium group in the block. Six of the boxes are Hornady Interlock with the factory holographic wrap and old shop price tags still attached, reading 150 grain SP number 3031 at...

1015
Pyrodex Triple Seven Pellets and 50 Cal Sabots
Four containers of muzzleloading supplies. The lot holds (1) a Hodgdon Pyrodex Pellets 50/50 case, 100 pre formed charges, net weight 8.57 ounces, (2) a Hodgdon Triple Seven case, 100 pre formed pellets 50/50, net weight 6.9 ounces, (3) a Thompson Ce...

1016
44 Caliber and 22 Caliber Bullets Lot 4 Boxes
Four boxes of handgun and rifle bullets. The lot holds (1) an E and E Lead Products extra hard cast match grade box marked 44 240g SWC, nearly full of 240 grain hard cast semi wadcutters with red lube grooves, hand priced $49.95, (2) a Hornady Bullet...

1017
41 Cal 410 Dia 210 Grain Bullets Hornady Sierra
Two boxes of 41 caliber .410 diameter 210 grain pistol bullets for the 41 Remington Magnum. The lot holds (1) a Hornady box, 100 count, number 41000, 41 Cal 210 Gr .410 hollow point XTP, lot 94-037, with the red FACTORY SEALED FOR YOUR PROTECTION tap...

1018
32 Caliber 95 Grain Cast Performance FNPB Bullets
One box of Cast Performance Bullet Company LBT style heat treated solids, marked 32/95 gr. FNPB, .312 diameter, 100 count. The box is opened and partial and holds a working quantity of heat treated cast flat nose plain base bullets with blue lube in ...

1019
7mm Remington Magnum Bullets and Brass 14 Boxes
Fourteen boxes of 7mm .284 diameter components. Thirteen hold bullets and one holds brass. Labels read two boxes of Sierra 120 grain Spitzer number 1900, Barnes 160 grain flat base X number 28446, Barnes 140 grain boattail X number 28444, Speer Grand...

1020
8mm 323 Rifle Bullets Lot 16 Boxes Sierra Nosler
Sixteen boxes of 8mm .323 diameter rifle bullets. Labels read Sierra 220 grain Spitzer boat tail number 2420, a second Sierra 8mm box, Nosler Ballistic Tip 180 grain Spitzer number 32180, Hornady 220 grain SP number 3238 quantity 100, Hornady 170 gra...

1021
Bulk Jacketed Soft Point Rifle Bullets Carton
One carton of bulk jacketed rifle bullets. The carton is a reused shipping box with red marker writing across the tape that reads in part No Lubricant and a price of twenty five cents. Inside are sealed plastic bags holding a large quantity of copper...

1022
Lee 400 Cor-Bon 3 Die Set and Factory Crimp Die
A Lee reloading die set for the 400 Cor-Bon in the red Lee storage box, plus a separate Lee Factory Crimp Die for the same cartridge. The red box holds the three die set with its shell holder, and alongside it are the loose Factory Crimp Die, two cle...

1023
Lee 30-30 Winchester 3 Die Set with Factory Crimp
A Lee reloading die set for the 30-30 Winchester, item 90506, in the red Lee storage box with the clear lid. The set is three dies, being a full length sizing and decapping die, a bullet seating die and the Lee Factory Crimp Die, along with the shell...

1024
Lee 44 Magnum Carbide 4 Die Set 90512
A Lee carbide reloading die set for the 44 Remington Magnum, item 90512, in the red Lee storage box. The set is four dies, being a carbide full length sizing and decapping die, a powder through expanding die, a bullet seating die and the Lee Factory ...

1025
Lee 338 Winchester Magnum Collet 2 Die Set 90721
A Lee collet die set for the 338 Winchester Magnum, item 90721, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, with the printed instruction sheet. The box label gives th...

1026
Lee 8mm Remington Magnum Factory Crimp Die
One Lee Factory Crimp Die in the red Lee storage box with the printed Lee Factory Crimp Die instruction sheet, a small yellow plastic accessory and the box lid. The instruction sheet is hand marked 8mm Rm for 8mm Remington Magnum. The collet fingers ...

1027
Lee 25-06 Remington Collet 2 Die Set 90711
A Lee collet die set for the 25-06 Remington, item 90711, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and t...

1028
Lee 357 SIG 3 Die Set with Shell Holder
A Lee reloading die set for the 357 SIG in the red Lee storage box. The set is three dies, being the carbide sizing and decapping die, the powder through expanding die and the bullet seating die, with the shell holder and the printed Lee instruction ...

1029
Lee 7mm Remington Magnum 2 Die Set Shell Holder
A Lee reloading die set for the 7mm Remington Magnum in the red Lee storage box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder, a yellow plastic accessory and the printed Lee ins...

1030
Lee 7mm STW Shooting Times Westerner 2 Die Set
A Lee reloading die set for the 7mm Shooting Times Westerner in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, a sizing die and a seating die, along with a spare lock ring. One die body is stamped 7MM STW. The 7...

1031
Lee 7mm Remington Magnum Factory Crimp Die 90821
One Lee Factory Crimp Die for the 7mm Remington Magnum, item 90821, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set. A Factory Crimp Die works differently from the crimp built into...

1032
Lee 7mm STW Factory Crimp Die 90869
One Lee Factory Crimp Die for the 7mm Shooting Times Westerner, item 90869, in the red Lee flip top box with the printed Lee Factory Crimp Die instruction sheet. This is a single die, not a set, and the die body is stamped 7MM STW. The 7mm STW is an ...

1033
RCBS 9mm Luger 3 Die Set 20504 with Shell Holder
An RCBS three die set for the 9mm Luger, part number 20504, in the green RCBS box with the yellow end label. The set is three dies, being the sizing and decapping die, the expander die and the bullet seating die, along with an RCBS shell holder and a...

1034
Hornady 6.5-06 Custom Grade 2 Die Set 546280
A Hornady Custom Grade New Dimension two die set for the 6.5-06, Series IV, full length, item 546280, in the red Hornady box with the foam insert. The end label calls for shell holder number 1. The set is two dies, being the full length sizing die an...

1035
RCBS 270 Winchester 2 Die Full Length Set 13501
An RCBS full length two die set for the 270 Winchester, part number 13501, group A, in the green RCBS box. The end label calls for shell holder number 3. The set is two dies, being the full length sizing and decapping die and the bullet seating die, ...

1036
RCBS 380 Auto 3 Die Carbide Taper Crimp Set
An RCBS three die carbide taper crimp set for the 380 Auto, part number 20415, group B, in the gray RCBS storage box. The end label calls for shell holder number 10. The set is three dies, being the carbide sizing and decapping die, the expander die ...

1037
RCBS 38-40 Winchester 3 Die Set Vintage Box
An RCBS three die set for the 38-40 Winchester in the old yellow and green RCBS cardboard box printed RELOADING IS FUN. The set is three dies wrapped in tissue paper, and the sizing die body is stamped RCBS 38-40 F.L. for full length. An old ink pric...

1038
RCBS 45 ACP Carbide Sizer and Seater Die Pair
Two RCBS dies for the 45 ACP in the gray RCBS storage box that is labeled as a three die carbide taper crimp set, part number 20415 style packaging, with the end label calling for shell holder 03. Read this before bidding. Only two of the three dies ...

1039
Lee 429 Bullet Lubricating and Sizing Kit Die
A Lee bullet lubricating and sizing kit for .429 inch bullets in the red Lee storage box with the printed instruction sheet. The sizing die is stamped LEE-429-B6. The lot is the one die plus the box and the sheet. A Lee sizing kit is what a cast bull...

1040
Lee 300 Winchester Magnum 3 Die Set 90539 Crimp
A Lee reloading die set for the 300 Winchester Magnum, item 90539, in the red Lee storage box with an old shop price sticker of $21.00 on the lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the L...

1041
Lee 22-250 Remington 3 Die Set with Crimp 90503
A Lee reloading die set for the 22-250 Remington, item 90503, in the red Lee storage box with the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp D...

1042
Lee 338 Winchester Magnum 3 Die Set 90546 Crimp
A Lee reloading die set for the 338 Winchester Magnum, item 90546, in the red Lee storage box with a shop inventory sticker on the lid and the printed Lee instruction sheet. The set is three dies, being the full length sizing and decapping die, the b...

1043
Lee 243 Winchester Collet 2 Die Set 90709
A Lee collet die set for the 243 Winchester, item 90709, in the amber Lee storage box. The set is two dies, being the Lee Collet neck sizing die and the dead length bullet seating die, together with the shell holder, a yellow plastic accessory and th...

1044
RCBS Case Trimmer Collet No 3 and 30 Cal Pilot
An RCBS case trimmer collet, No. 3, part number 09373, in its green RCBS box, together with a case trimmer pilot stamped 30 for the .308 inch bore. An old C R Specialty price sticker of $4.00 is on the box. The collet is the part that grips the case ...

1045
Lee 243 Winchester 3 Die Set 90504 Factory Crimp
A Lee reloading die set for the 243 Winchester, item 90504, in the red Lee storage box with the clear lid. The set is three dies, being the full length sizing and decapping die, the bullet seating die and the Lee Factory Crimp Die, plus the shell hol...

1046
Lee 32 Smith and Wesson Long Carbide 4 Die Set
A Lee carbide four die set for the 32 Smith and Wesson Long in the red Lee storage box. The packaging card in the lid lists the contents as a steel shell holder and powder measure, a carbide sizing die, a bullet seating and feeding die and a carbide ...

1047
Lee 223 WSSM 2 Die Set 90446 with Shell Holder
A Lee reloading die set for the 223 Winchester Super Short Magnum, item 90446, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, together with the shell holder, a yellow 2.8 c...

1048
Lee 270 WSM 2 Die Set 90572 with Shell Holder
A Lee reloading die set for the 270 Winchester Short Magnum, item 90572, in the red Lee flip top box. The set is two dies, being the full length sizing and decapping die and the bullet seating die, with the shell holder and the printed Lee instructio...

1049
Lee 8mm Remington Magnum 2 Die Set 90775
A Lee reloading die set for the 8mm Remington Magnum, item 90775, in the red Lee flip top box with the printed Lee instruction sheet. The set is two dies, being the full length sizing and decapping die and the bullet seating die. The die bodies are s...

1050
Lee Universal Decapping Die 90292 in Red Box
One Lee Precision Universal Decapping Die, part number 90292, in the original red box with the factory instruction sheet. The die body is stamped LEE DECAPPER H2 and wears a hex lock ring. A universal decapper does one job and does it in any caliber....

1051
Lee 25-06 Remington Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 25-06 Remington, part number 90836 on the box end, packed in the original red box with the factory instruction sheet. This is the collet style rifle crimp die that Lee is known for. Four hardened fingers close ...

1052
Bystrom 44 Magnum 3 Die Pistol Set in Box
A vintage three piece pistol die set in 44 Magnum from Bystrom, sold through Minnesota Shooters Supply of Minneapolis. The box label reads 3 PIECE PISTOL DIES CALIBER 44 MAG. The set holds a sizing die stamped 44 SIZER, an expanding die and a bullet ...

1053
RCBS 30-06 Springfield 2 Die Set Green Box
An RCBS Precisioneered two die set for 30-06 Springfield in the old green cardboard box with the caliber written on the end label and an original price sticker of $13.50. The two dies are wrapped in factory paper. One is the full length sizing die wi...

1054
RCBS 30-06 Springfield 2 Die Full Length Set
An RCBS full length die set for 30-06 Springfield, Group A, in the green plastic Omark era box with the original instruction sheet and a price tag of $18.00. The set holds the full length sizing die with its decapping rod and expander ball and the bu...

1055
Redding 6.5mm-06 Seating Die 92378 Series C
A Redding Series C seating die for the 6.5mm-06 wildcat, part number 92378, in the original Redding box. The die body is stamped REDDING 6.5-06 and the box end reads SEAT DIE SERIES C 6.5MM 06. The lot also holds a micrometer style seating adjustment...

1056
RCBS 45 Colt Carbide 3 Die Set 19112
An RCBS carbide three die set for 45 Colt, part number 19112, Group B, in the gray RCBS box that calls for shell holder number 20. Four die bodies are present. There is a carbide sizing die stamped 45 COLT, an expanding die, a seating die stamped COL...

1057
Hornady 30-30 Winchester 2 Die Set 546342
A Hornady Custom Grade New Dimension two die full length set for 30-30 Winchester, item number 546342, Series I, calling for shell holder number 2. The red box holds the full length sizing die with the Hornady Zip Spindle decapping assembly, the bull...

1058
RCBS 6.5 Creedmoor 2 Die Full Length Set
An RCBS full length die set for 6.5 Creedmoor, part number 32901, Group D, calling for shell holder number 3. The green box holds the full length sizing die and the bullet seating die, both stamped RCBS 6.5 CRDMR, along with the printed instruction s...

1059
RCBS 380 Auto Taper Crimp Seater Die 20462
One RCBS taper crimp seating die for 380 Auto, part number 20462, Group B, calling for shell holder number 10. The die body is stamped RCBS 380 AUTO T slash C. It comes in the green RCBS box with the printed instruction sheet. A taper crimp die is th...

1060
Lyman 38 Special 357 Magnum Carbide Sizer Die
A Lyman All American carbide sizing die for 38 Special and 357 Magnum, part number 7590179, in the orange Lyman box marked CARBIDE SIZER and DELUXE SIZING DIE 357 38. The die is still in its factory paper wrap and comes with a lock ring, a small Alle...

1061
Lee 243 Winchester Factory Crimp Die 90819
One Lee Precision Factory Crimp Die for 243 Winchester, part number 90819, in the original red box with the factory instruction sheet. This is the collet style rifle crimp die. Four hardened steel fingers squeeze the case mouth inward from the outsid...

1062
Lee 6mm Remington Factory Crimp Die 90832
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet. The collet crimp design uses four hardened fingers that close on the case mouth from the outside, so the crimp is un...

1063
Lee 6mm Remington Factory Crimp Die in Red Box
One Lee Precision Factory Crimp Die for 6mm Remington, part number 90832, in the original red box with the factory instruction sheet and the barcode label intact on the end. A factory crimp die is the last die in the sequence. After the bullet is sea...

1064
Lee Universal Case Expanding Die in Box
One Lee Precision Universal Case Expanding Die in the original box with the factory instruction sheet. The die body is stamped LEE EXPNDR A9. Lee describes it as a tapered expander that will flare any case from 22 caliber through 45 caliber. This is ...

1065
Lee Hand Priming Tool Shell Holder Set of 11
A Lee Precision shell holder set for the Lee Auto Prime and hand priming tools, red plastic tray, part number SH3571. Eleven shell holders are present and one well in the twelve place tray is empty. The holders carry the Lee numbers 1, 2, 3, 4, 5, 7,...

1066
RCBS 6mm Remington 2 Die Full Length Set
An RCBS full length die set for 6mm Remington, Group A, in the green RCBS box with the part number T1501 on the end label. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die with an adjustable...

1067
RCBS 243 Winchester 2 Die Set 11401 Green Box
An RCBS full length die set for 243 Winchester, part number 11401, Group A, calling for shell holder number 3, in the green Omark era box with the reloading data card. The set holds the full length sizing die with its decapping rod and expander ball ...

1068
Lyman 357 Magnum 3 Die Pistol Set in Box
A Lyman All American three die pistol set for 357 Magnum, part number 7462309, in the orange Lyman box. The end label reads 3 DIE PISTOL 357 MAG and carries a shop marking of USED $13.00. Three dies are present, a sizing die, an expanding die and a b...

1069
RCBS 22-250 Remington 2 Die Full Length Set
An RCBS full length die set for 22-250 Remington, part number 10601, Group A, in the green RCBS box. The set holds the full length sizing die with its decapping rod and expander ball and the bullet seating die, which is stamped SEAT on the body. Also...

1070
RCBS 8mm Remington Magnum 2 Die Set 16001
An RCBS full length die set for 8mm Remington Magnum, part number 16001, Group A, calling for shell holder number 4, in the green RCBS box. An old Carls Gun Shop price tag of $25.95 is still on the lid. The set holds the full length sizing die with i...

1071
RCBS 25-06 Remington 2 Die Full Length Set
An RCBS full length die set for 25-06 Remington, part number 12001, Group A, in the green RCBS box with the printed reloading data card and a red price sticker of $10.00. Both dies are stamped RCBS 25-06. The set holds the full length sizing die with...

1072
RCBS 40 SW 10mm Auto Carbide 3 Die Set 22115
An RCBS three die carbide taper crimp set for 40 Smith and Wesson and 10mm Auto, part number 22115, Group B, calling for shell holder number 27, in the gray RCBS box. The set holds the carbide sizing die, the expanding die and the taper crimp seating...

1073
RCBS 264 Neck Expander Die 39811 with Plug
An RCBS neck expander die for 264 caliber, part number 39811, in the green RCBS box. The label has 308 added by hand in blue marker. The die body is stamped EXP BODY 11 and is fitted with an expander plug marked 264. A second loose expander plug is i...

1074
RCBS 6.5mm-06 2 Die Full Length Set 27801
An RCBS full length die set for 6.5mm-06, part number 27801, Group D, calling for shell holder number 3, in the green RCBS box. Both dies are stamped RCBS 6.5-06. The set holds the full length sizing die with its decapping rod and expander ball and t...

1075
RCBS 308 Winchester 3 Die Set and Primer Tool
A 308 Winchester die group in an RCBS green box marked FL DIE SET 308 WIN, part number 15501, Group A, shell holder number 3, with a handwritten price of $36.50. Three dies are present. Two are RCBS and are stamped RCBS 308 WIN, the full length sizer...

1076
RCBS 38 Special SWC 3 Die Set 18306 Group B
An RCBS three die set for 38 Special with a semi wadcutter seating plug, part number 18306, Group B, in the green RCBS box. An old Maywood Sports store sticker is on the lid. Three dies are present, a sizing die stamped 38 SIZE, an expanding die and ...

1077
44 Caliber Bullet Lot 4 Boxes 240 and 255 Gr
Four containers of 44 caliber bullets from the Ferguson bench. The lot holds (1) a Speer box of 44 caliber 240 grain 429 diameter soft points, number 4457, with roughly a dozen bullets left, (2) a Montana Bullet Works box of 44 Magnum Authentic Keith...

1078
Hornady XTP and Cast 45 Colt Bullets 2 Boxes
Two boxes of 45 caliber bullets. The first is a Hornady box of 45 caliber 250 grain XTP hollow points, item 45200, 452 inch diameter, quantity 100, with 45 COLT written on the lid in marker and an old green price dot of $37. The bullets are still in ...

1079
Sierra 30-30 125 Gr Flat Nose HP 2 Boxes
Two Sierra boxes of 30-30 caliber rifle bullets, 308 diameter, 125 grain flat nose hollow point, Pro Hunter, item number 2020, marked 100 rifle bullets on the label. Both boxes have been opened and are partly used. Each one holds roughly two dozen bu...