Rollstock Liquidation Auction
Listing ID#: 905675

Sale Location
5720 Brighton Ave
Kansas City, MO 64130
Sale Dates and Times
Bidding Starts: Tuesday Oct 20, 12:00 PM
Bidding Ends: Wednesday Nov 11, 7:00 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Oldham Auctions

Contact: Brody Oldham
Phone: 816-935-7439
Email: sale@oldhamauctions.com
Website: www.oldhamauctions.com

EstateSale.com ID#: 11753
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
OLDHAM AUCTIONS TERMS & CONDITIONS

Oldham Auctions and Seller(s) disclose all items are sold as is, where is. No guarantees and/or warranties are expressed or implied, and all sales are final.
It is the buyers' responsibility to inspect all items prior to bidding to determine actual current condition, all faults, all defects, and any errors of description.
It is the buyers' responsibility to place bids accordingly and correctly. Bids are not allowed to be retracted unless authorized by Oldham Auctions.
All payment must be made by the stated date. Payment may be made by, Cash, Approved Personal or Company Check, Money Order, Wire Transfer, MasterCard, Visa, Discover, American Express. By agreeing to these terms, the Buyer waives the right to initiate a credit card chargeback for any reason. All disputes must be resolved directly with Oldham Auctions according to the terms listed herein.
3.5% charge is added to all credit card transactions. Credit cards are not accepted forms of payment on titled items or any invoice totaling over $2,000.00.
10% buyers' premium is charged and will be added to the final bid amount after sales tax, but will not exceed $1000 per item.
All items must be removed by specified removal date, unless otherwise noted or special provisions have been made. Restocking fees equal to the purchase price plus applicable hauling and storage fees are applied for items left behind by the buyer or not picked up within the stated time.
$20.00 per week storage fee will be charged to the buyer for any item(s) left at the Oldham Auctions Warehouse in Odessa, MO
Unpaid and/or items that have not been picked-up by the winning bidder within the scheduled pick-up day/time will be considered abandoned with no entitlement of any refunds to the original buyer.
Restocking fee equal to the purchase price plus applicable hauling and storage fees will be charged to the buyer credit card for any items not paid for in full within the scheduled day of pick-up.
Risk of loss or damage to any item passes to the Buyer immediately upon the fall of the hammer or when the lot is declared sold. Oldham Auctions is not responsible for theft, vandalism, or damage to items remaining on the premises after the sale concludes, even if the Buyer has not yet removed them.
Odometer readings and hour meter readings are listed as they appear on the equipment at the time of listing. These are not guaranteed to be accurate or actual. It is the Buyer’s responsibility to verify actual hours/miles during their personal inspection.
Absentee bids, proxy bids, and online bids are legal and binding. The winning bidder must pay for the item(s) in full before removal.
It is the buyers’ responsibility to keep their profile up-to-date with correct contact & billing information.
You are solely responsible for maintaining the confidentiality of your username and password. You are fully responsible for all activities that occur under your account. Oldham Auctions is not liable for any loss or damage arising from your failure to comply with this section.
Buyers will be barred from Oldham Auctions and legal action may be taken for but not limited to default of payment, tampering of the auction process, or any other action intended to harm Oldham Auctions LLC, Sellers’, or Buyers’.
Oldham Auctions reserves the right to reject any bid, decline registration, or ban any bidder from participating in current or future auctions at our sole discretion, for any reason, and without prior notice. We are under no obligation to provide an explanation for such actions.
Collusion, shill bidding, or any form of price manipulation between Buyers is strictly prohibited. Oldham Auctions reserves the right to cancel any bids or ban any users suspected of participating in such activities.
The use of software, bots, spiders, or any automated system to place bids ("snipping tools") or scrape data from this website is strictly prohibited. Oldham Auctions reserves the right to immediately terminate any account suspected of such activity and invalidate associated bids.
You agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated, or representative action. You hereby waive any right to a jury trial.
Shipping & handling is available for "small" items. Call or text Oldham Auctions with the "lot" number you are interested in prior to bidding.
Shipping is available but only on certain items and only upon clearance of funds, and at the buyers expense.
Buyers and all individuals participating and/or attending the auction agree to hold harmless Oldham Auctions LLC, all staff members, all associates, and owners/sellers of the property from any liability, including but not limited to bodily harm, personal injury, disease and/or illness or sickness, loss, breakage, damage, mechanical issues, theft, fire, or any other occurrence.
Oldham Auctions LLC, all staff members, all associates, and owners/sellers shall not be responsible in any manner for any type of damages, caused in whole or in part, by the packing, shipping, loading or transporting of any items once they have been purchased by the buyer. Oldham Auctions staff are not obligated to assist with loading. If staff assists, they do so at the buyer's sole risk, and Oldham Auctions assumes no liability for damage to the item or buyer's vehicle during the process.
Oldham Auctions LLC is providing Internet bidding as a service to the Bidder(s). Bidder(s) acknowledges and understands that this service may or may not function correctly during the auction. Under no circumstances shall Bidder(s) have any claim against Oldham Auctions LLC or anyone else if the Internet service fails to work correctly before or during the auction. Oldham Auctions will not be responsible for any missed bids from any source.
Oldham Auctions is not responsible for any interruption in service, errors, or omissions caused by any means and does not guarantee continual, uninterrupted, or error-free service or use of the site.
We are not liable for any failure or delay in performance due to causes beyond our reasonable control, including but not limited to: acts of God, power outages, internet service provider failures, server crashes, software glitches, cyber-attacks, or government restrictions. In the event of a technology failure during the closing of an auction, Oldham Auctions reserves the right to void bids, reopen bidding, or extend the auction closing time at our sole discretion.
Oldham Auctions reserves the right to extend, pause, or remove the auction and/or individual items at any time due to any unforeseen circumstances.
Any legal disputes arising from this auction shall be settled in the courts of Lafayette County, Missouri. Both parties waive their right to a jury trial and agree that the laws of the State of Missouri shall govern.
Bidding will close out 1 item per minute starting at 7:00pm CST.
Bidding is extended 2 minutes if a bid is placed on an item in the last remaining minutes. This prevents "Snipping", and keeps the bidding process fair for all the buyers.
If any provision of these Terms & Conditions is found to be unenforceable or invalid by a court of competent jurisdiction, such invalidity shall not affect the remaining provisions, which shall remain in full force and effect.
By registering, you consent to the collection and use of your personal information by Oldham Auctions for the purpose of processing transactions and notifying you of future auctions. We do not sell, trade, or rent your personal identification information to third parties.
Buyer agrees upon registration and placing bids, you certify that you are at least 18 years of age and have the legal capacity to enter into a binding contract, and to be bound by the terms and conditions of this auction.
We want everyone to enjoy their online experience, please contact us prior to bidding if you have any questions.
Listing Information

ROLLSTOCK LIQUIDATION

Wednesday, Nov. 11th

Visit www.oldhamauctions.com

Haas Vertical CNC Machine, Mori Seiki CNC Machine, Tooling, Nice Selection Of Shop Equipment and Tools, Shelving, Office Furniture and Supplies, And More!!!

 

#2 • Mori Seiki CNC

= Model MV-55/50 = Seller States Working Condition/Currently Disconnected = Serial Number 1527 = Three Phase Electric = 60 Hz Frequency = 220 Volts AC = 33.5 KVA Rated Power = Fanuc CNC Control Console = Includes Chip Conveyor = Includes Hydraulic Power Unit = Includes Sidewinder 8 Inch Tube Skimmer = Includes Renishaw IMM Module = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#3 • Haas Vertical CNC

= Model VF-3 = Seller States Working Condition/Currently Disconnected = Serial Number 3588 = Date Of Manufacture 09/1994 = 15 Horsepower High Torque = 208/230 Volts = 3 Phase = 50/60 Hertz = Full Load 30 Amps = Largest Load 20 Amps = Includes Clamping Kit, Tooling, Haas Gear Oil, And Coolant Pump = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#4 • CNC Milling Tools And Cutters

= Assorted Tooling = Collet Chuck Tool Holders = End Mill Tool Holders = Shell And Face Mill Arbors = Indexable Face Milling Cutters = Drill Chucks And Tapping Heads = Extension Sleeves And Tool Adapters = Includes Mounted Drills, Cutters, And Touch Probe = Do Your Homework $$
Notes
 

#5 • Cnc Tools And Milling Accessories

= Assorted Tooling = Right-Angle Milling Head Attachment = Indexable Face Mill Cutters = Collet Chucks = End Mill Holders = Drill Chucks = Includes Twist Drill Bits, End Mills, And Slot Cutters = Do Your Homework $$
Notes
 

#6 • CNC Tools And Machining Accessories

= Assorted Tooling = Lisa X - 1049 ISO SK 50 Tool Holder = Extended Collet Chuck Tool Holder = Adapter Sleeve Tool Holder = Benchtop Tool Holder Rack = Includes Drill Bits, Collet Chucks, Bushings, Spanner Wrenches, Chuck Keys, Hardware, And Accessories = Do Your Homework $$
Notes
 

#7 • CNC Tools

= Assorted Tooling = Steep Taper CNC Tool Holders = Collet Chucks And Extension Sleeves = End Mill Adapters And Arbors = Includes Metal Storage Rack = Includes Mounted Cutters And Drill Bits = Do Your Homework $$
Notes
 

#8 • Tooling/Hardware

= Assorted Tooling Hardware = Hamai Clamping Hardware = Serrated Step Blocks And Clamps = Threaded Setup Studs And Coupling Nuts = Lathe Roller Rest Assembly = Includes Setup Tooling, Roller Rest, And Storage Bins
Notes
 

#9 • RK Machinery 10 Ton Press

= Model HFP-10T = Serial Number 070322301T = 10 Ton Capacity = 2 HP Baldor Electric Motor = 115/230 Volts = Single Phase = 1725 RPM = Pressure Gauge Shows 0 PSI = Includes Steel Press Blocks And Tooling Bar = Measures 40" x 66" = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#10 • Jet Vertical Bandsaw

= Model VBS-350 = Serial Number 352583 = Vertical Bandsaw = Integrated Blade Welder = Welder Voltage 110-115 V = Welder Capacity 1/8 To 5/8 Inch (3 To 16 Mm) = Grooved Cast Metal Work Table = Adjustable Blade Guide Assembly = Top Blade Tension Handwheel = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#11 • Jet Belt And Disc Sander

= Model J-4200A-2 = Stock Number 414552 = Serial Number 21110108 = 6" X 48" Belt = 12" Disc = 1-1/2 Horsepower Motor = Single Phase = 230 Volt = Includes Cabinet Stand = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#12 • Porter-Cable Air Compressor

= Model CPLKC7080V2 = Serial Number 0920282075 = 80 Gallon Capacity = 7 Peak Horsepower = 175 PSI Maximum Pressure = 240 Volts, 30 Amps, Single Phase = Includes Regulator And Filter Assembly = Includes Hose = Buyer Responsible For Disassembly = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#13 • Dayton Blast Cabinet With Dust Collector

= Maximum Pressure 120 PSI = Minimum Pressure 5 PSI = Arm Ports With Protective Gloves = Hopper Bottom With Slide Gate = Foot Pedal Control = SMC Pneumatic Regulator And Solenoid Valve = Includes Econo Dust Collector And Hose = Measures 43"W x 26" x 66"T = Buyer Responsible For Disassembly And Removal = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#14 • Ridgid 10 In. Table Saw

= Model R4512 = 10 In. Blade Diameter = 3450 RPM = 120 / 240 V = Integrated Mobile Base Stand = Includes Rip Fence And Miter Gauge
Notes
 

#15 • Hitachi Compound Miter Saw

= Model C10FCH2 = Compound Miter Saw = Integrated Laser Guide = Cast Turntable Base With Angle Gauge = Includes Dust Collection Bag
Notes
 

#16 • DeWalt 14" Abrasive Chop Saw

= Model DW871 Type 1 = Serial Number 431255 = 120 V AC/DC = 15 Amps = 3800 RPM = 14 Inch Cutting Wheel Capacity = 1 Inch Arbor Size = Integrated Material Clamping Vise = Includes Abrasive Metal Cutting Wheel
Notes
 

#17 • Jepson Power Circular Saw

= Model SHDC8320 = Serial Number 21040041 = Voltage 110-120V = Frequency 50-60Hz = Power Rating 1700W = Speed 1700 RPM = Saw Blade Diameter 320mm = Maximum Cutting Depth 120mm = Includes Instruction Manual
Notes
 

#18 • Black & Decker Professional Chop Saw

= Black & Decker Professional Chop Saw = Integrated Material Vise Clamp With Hand Crank = Pivoting Cutting Head = Metal Blade Guard = Top Operating Handle With Trigger Switch = Secondary Side D-Handle
Notes
 

#19 • Dyna-Glo Forced Air Heater

= Model KFA50DGD = 50,000 BTU Rating = 5.0 Gallon Fuel Tank Capacity = 0.38 Gallon Per Hour Fuel Consumption = 120VAC 60Hz Power Requirement
Notes
 

#20 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Capacity 400 / 480 M3/H = Motor Output 11.0 / 13.2 KW = Speed 970 / 1165 RPM = Pressure Rating 0.5 / 10 Mbar = Pressure Gauge Shows 0.85 Bar = Includes Telemecanique Switch Box
Notes
 

#21 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Serial Number 03 600908520001 = Capacity 400/480 M³/h = Vacuum Range 0.5/10 Mbar = Power Rating 11.0/13.2 KW = Operating Speed 970/1165 RPM = Baldor Drive Motor = Pressure Gauge Shows 0 Bar = Includes Telemecanique Switch Box
Notes
 

#22 • Pioneer Refrigerant Air Dryer

= Model R 100A = Serial Number B9321253A = 1/2 Horsepower Compressor = 115 Volts = 1 Phase = 250 PSI Maximum Pressure = Low Side Design Pressure 150 PSI = High Side Design Pressure 450 PSI = R-22 Factory Charge = Refrigerant Suction Pressure Gauge Shows Approx. 50 PSI
Notes
 

#23 • Scaffolding Frames With Deck And Hardware

= Steel Scaffolding End Frames = Platform Deck = Cross Bracing Components = Perforated Steel Posts = Includes Pins And Casters = Nice Clean Set $$
Notes
 

#24 • Aluminum Diamond Plate Dock Plate

= Welded Aluminum Construction = Diamond Tread Plate Deck = Raised Side Curbs = Underside Locking Stop Plates = Corner Shackle Attachment Points = Includes Durabilt Polyester Lifting Straps = Measures 5' x 5'
Notes
 

#25 • Uline 3-Step Rolling Safety Ladder

= Brand: Uline = Three-Step Rolling Safety Ladder = 350 Lbs Maximum Load = Capacity One Person = Perforated Steel Slip-Resistant Steps = Top Safety Platform = Dual Tubular Handrails = Spring-Loaded Front Casters = Rubber Tipped Legs = Made In The U.S.A.
Notes
 

#26 • Cotterman Two-Step Industrial Platform

= Cotterman Two-Step Work Platform = Steel Frame Construction = Serrated Diamond Grip-Strut Safety Grate Steps = Bolted Frame Assembly = Threaded Adjustable Leveling Foot = Capacity 1 Person = Made In The U.S.A. = Measures 48" x 24" x 21"
Notes
 

#27 • Industrial Steel Platform Cart

= Industrial Platform Cart = Steel Channel Frame = Flat Platform Deck = Tubular Steel Handle = Center Upright Post = Undermount Caster Wheels = Measures 5' x 30"
Notes
 

#28 • Jepson Premium Super Dry Cutter And Bench

= Jepson Premium Super Dry Cutter Metal Saw = Screw Type Material Vise Clamp = Clear Chip Shield And Blade Guard = 14 Inch Blade Capacity = Includes Wooden Workbench With Shelf = Includes Lenox Circular Saw Blades = Includes CGW Abrasives Cutting Wheels = Includes Bar Clamp = Measures 75" x 24" x 34"T
Notes
 

#29 • Industrial Steel Top Workbench

= Industrial Steel Workbench = Steel Plate Tabletop = Welded Steel Frame = Lower Storage Shelf = Measures 6'W x 4' x 39"T
Notes
 

#30 • Industrial Steel Welding Work Table

= Heavy Steel Plate Tabletop = Pre-Drilled Mounting Holes Along Outer Edges = Welded Square-Tube Steel Frame = Lower Tubular Horizontal Stretchers = Measures 49" x 5' x 34"T
Notes
 

#31 • Rolling Tubular Metal Utility Cart

= Tubular Metal Frame = Carpeted Top Platform = Lower Slatted Shelf = Four Swivel Caster Wheels = Measures 36" x 18.5" x 30"T
Notes
 

#32 • Uline Two Shelf Utility Cart

= Brand: Uline = Two Deep Lipped Basin Shelves = Molded Push Handle With Storage Compartments = Four Upright Corner Support Legs = Four Caster Wheels = Measures 25" x 42" x 33"T
Notes
 

#33 • Aero-Motive Hose Reels

= Aero-Motive Econ-O-Mite Hose Reels = Two Units Included = Model D535 = Model D633 = Includes Air Hoses, Brass Couplers, And Valve
Notes
 

#34 • Wilton C1 Bullet Swivel Base Bench Vise

= Brand Wilton = Model C1 = 5.5" Jaw = Bullet Style Bench Vise = Swivel Base Mechanism = Integrated Anvil Surface = Includes Metal Soft Jaw Caps = Includes Mounting Bolts With Nuts And Washers
Notes
 

#35 • HTC Roller Support Stands

= Quantity: Two Roller Stands = Brand: HTC = Model: HSS-18 = Series: Wedge Lock Super Duty = Steel Conveyor Roller Top = Telescoping Height Adjustment Column = Manual Adjustment Crank Handle = Four Leg Steel Base With Leveling Feet
Notes
 

#36 • Roller Support Stands

= Brand HTC = Model HSS-18 = Super Duty Roller Support = Cylindrical Steel Roller = Telescoping Height Adjustment = Four Point Base With Leveling Feet = Includes Adjustable Roller Stand
Notes
 

#37 • Pallet Of Red Plastic Storage Crates

= Pallet Lot Of Red Molded Plastic Crates = Ribbed Wall Construction = Massive Collection = Do Your Homework $ = See Photos For Description
Notes
 

#38 • Plastic Parts Bins In Wooden Crates

= Plastic Parts And Storage Bins = Molded Construction With Ribbed Exterior = Nested Stacking Configuration = Includes Two Wooden Shipping Crates
Notes
 

#39 • Plastic Parts Bins In Wooden Crates

= Molded Plastic Parts Bins = Two Wooden Pallet Storage Crates = Multiple Bin Sizes = Includes Plastic Insert Containers = Includes Hardware Fasteners
Notes
 

#40 • Plastic Storage Bins

= Molded Plastic Parts Organizer Bins = Modular Plastic Containers With Dividers = Includes Telescoping Plastic Parts Storage Tubes = Two Plywood Pallet Crates = Integrated Pallet Skids = Metal Corner Reinforcement Brackets = Braided Rope Handles
Notes
 

#41 • Plastic Parts Storage Bins In Crate

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#42 • Plastic Parts Storage Bins

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#43 • Uline Shelf Bin Dividers And Bins

= Model S-19944D = Uline Shelf Bin Dividers = Dimensions 11 Inch By 4 Inch = Includes Akro-Mils Plastic Storage Bins = Includes Wooden Crate
Notes
 

#44 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 26 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#45 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 19 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#46 • Industrial Steel Shelving Unit

= Industrial Steel Shelving Unit = Two Slotted Upright Frames = Diagonal Cross Bracing = Three Shelf Tiers = Six Horizontal Steel Beams = Measures 151"W x 29"D x 8'
Notes
 

#47 • Industrial Shelving Unit

= Brand Uline = Five Shelf Tiers = Four Upright Posts = Measures 25" x 8' x 7'T
Notes
 

#48 • Industrial Steel Shelving Unit

= Steel Industrial Shelving Unit = Five Tier Storage Rack = Measures 6' x 2' x 6'
Notes
 

#49 • Uline 4-Tier Rolling Wire Shelving Cart

= Four-Tier Wire Shelving Unit = Tubular Corner Posts = Uline Swivel Caster Wheels = Measures 24" x 36" x 68"
Notes
 

#50 • Multi Compartment Metal Storage Cabinet

= Industrial Multi Compartment Cabinet = Sheet Metal Construction = Multiple Hinged Access Doors = Twist Latch Closures = Knockout Mounting Slots = See Photos For Condition (Has Some Damage) = Measures 31" x 21"x 7'
Notes
 

#51 • Kennedy Steel Shop Desk Cabinet

= Kennedy Brand = Steel Construction = Upper Tiered Organizer Shelf = Sloped Desktop Surface = Single Drawer With Lock = Lower Double Door Storage Cabinet = Center Turn Handle Latch = Four Square Support Legs = Measures 53"T x 29" x 35"
Notes
 

#52 • Industrial Steel Standing Shop Desk

= Sheet Steel Construction = Sloped Writing Surface = Upper Pigeonhole Organizer Riser = Single Slide-Out Storage Drawer = Lower Support Shelf = Four-Legged Steel Base = Measures 35"W x 29.5"D x 53"T
Notes
 

#53 • Industrial Pedestal Fans

= Quantity Of Three Industrial Pedestal Fans = Dayton Model 2LY94B Commercial Air Circulator = Dayton Fan Diameter 16" = Includes Round Pedestal Bases With Wheels = See Photos For Description/Condition
Notes
 

#54 • Dayton 16 In Pedestal Fans

= Dayton Light Commercial Air Circulator = Model 2LY94B = Quantity Of Two = 16 Inch Fan Diameter = Three Speed Settings = Adjustable Pedestal Pole With Wheeled Base
Notes
 

#55 • Dayton Commercial Fan

= Model 2LY97B = Commercial Air Circulator With Pedestal Base = 24" Fan Diameter = Three Blade Assembly
Notes
 

#56 • Dayton 30" Mobile Circulator Fan

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#57 • Dayton 30" Mobile Air Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#58 • Dayton 30 In Mobile Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#59 • Dayton 30" Mobile Air Circulator

= Model 2MA12 = 30" Light Commercial Mobile Air Circulator = Three Speed Settings
Notes
 

#60 • FlowPro High Velocity Drum Fan

= FlowPro High Velocity Air Circulator = Model 10380 = Electrical 120V 60Hz 3.0A = Two Speed Settings High And Low = Mobile Base With Wheels
Notes
 

#61 • WorkSmart 30" Swivel Blower Fan

= Model FE-75DC1-1(A) = 30 Inch Diameter = Direct Drive Swivel Blower = 120 Volts At 60 Hz = 1/3 Horsepower Motor = Two Speed Settings
Notes
 

#62 • Simple Deluxe 18" Fans

= Model HIFANXWALLMOUNT18 = Quantity Of Three = 18 Inch Wall Mounted Fan = 115 VAC 60 HZ = 110 Watts = Thermally Protected = Pull Chain Switch = Adjustable Mounting Brackets
Notes
 

#63 • Sperian Pure Flow Eyewash Station

= Manufacturer Sperian Honeywell = Model Pure Flow 1000 = Includes Wall Mounting Bracket = Buyer Responsible For Removal (Bring Tools)
Notes
 

#64 • Sperian Pure Flow Eyewash Station

= Brand Sperian Honeywell = Model Fendall Pure Flow 1000 = Part Number 32-001050-0000 = Includes Cartridges And Wall Mount Bracket
Notes
 

#65 • Justrite 4 Drum Workstation

= Model H-4037 = Justrite 4 Drum Spill Containment Workstation Sump Capacity 49 Gallons = Load Capacity 6,000 Lbs = Made In USA = Includes Two Removable Grates
Notes
 

#66 • Commercial Trash Cans With Dollies

= Four Commercial Utility Containers = Heavy-Duty Plastic Construction = Molded Side Handles = Includes Four Wheeled Dolly Bases With Swivel Casters
Notes
 

#67 • Commercial Trash Cans With Dollies

= Four Molded Plastic Utility Containers = Integrated Side Handles = Reinforced Rims = Includes Four Wheeled Caster Dollies
Notes
 

#68 • Utility Trash Cans

= Commercial Plastic Utility Containers = 55 Gallon Capacity = 32 Gallon Capacity = Integrated Side Handles = Includes Wheeled Caster Dollies
Notes
 

#69 • Assorted Hand Tools

= Assorted Hand Tools= Razor-Back 7" Mortar Hoe = Includes Rubbermaid Commercial Products Caution Wet Floor Sign = Includes Square Point Shovel = Includes Brooms = Includes Stand-Up Metal Dustpan = Includes Floor Scrapers And Utility Handles = And More
Notes
 

#70 • Assorted Commercial Cleaning And Maintenance Tools

= Commercial Dust Mops = Push Brooms = Floor Squeegees = Plastic Snow Shovels With D-Grip Handles = Upright Lobby Dustpan = Metal Floor Scraper = Includes Additional Tool Handles
Notes
 

#71 • Mule Wheeled Pry Lever

= Tapered Wooden Lever Handle = Heavy Steel Nose Plate = Upturned Front Pry Lip = Dual Metal Roller Wheels = Underside Transverse Axle = Four Rivet Plate Fastening = Measures 7'L
Notes
 

#72 • Greenlee Conduit Bender

= Model 8843 = 1-1/4" EMT Conduit Capacity = 1" Rigid Conduit Capacity = Cast Metal Bender Head = Tubular Steel Handle = Includes Gardner Bender Conduit Bender With Handle
Notes
 

#73 • Dual Work Light Stands

= Brand Regent = Model Number TC51000 = Dual Halogen Fixtures = Telescoping Tripod Stand = One May Need Repaired/Bulbs
Notes
 

#74 • Rotary Drum Pump, Grease Gun And Hammer

= Rotary Drum Pump With Curved Discharge Spout = Threaded Suction Pipe Section = Manual Hand Crank = Includes Lever-Action Grease Gun With Flexible Extension Hose = Includes Ball-Peen Hammer With Wooden Handle
Notes
 

#75 • Tuthill Fuel Transfer Pumps

= Brand: Tuthill Corporation Fill-Rite Division = Series 100 = Model 112 = Compatible With Gasoline, Diesel Fuel, Fuel Oil, Lubricating Oil, And Kerosene = Includes Lever-Action Hand Pump = Includes Dispensing Hose And Suction Pipes
Notes
 

#76 • Hanging Packing Peanut Dispenser Hopper

= Heavy Fabric Hopper = Overhead Suspension Chains = Top Spreader Rods = Clear Ribbed Discharge Chute = Hose Clamp And Valve Assembly = Includes Packing Peanuts
Notes
 

#77 • Welded Steel Wheeled Dollies

= Welded Steel Frame Dollies = Two Units Included = Tubular Steel Construction = Four Swivel Caster Wheels Per Unit = Measures 24" x 24" And 24" x 16"
Notes
 

#78 • Assorted Pneumatic Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#79 • Assorted Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#80 • Ratcheting Tie Down Straps

= Assorted Straps (Great Condition ) = Ratcheting Tie Down Straps = Dimensions Of 2 In. X 27 Ft. = Working Load Limit Of 3,300 Lb. And 3,333 Lb. = Breaking Strength Of 10,000 Lb.
Notes
 

#81 • Scotts Turf Builder Seeder

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#82 • Scotts EdgeGuard Mini Spreader

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#83 • Modular Desk Suite With Hutch And Peninsula

= Modular Executive Workstation System = Upper Storage Hutch With Cabinet Doors = Fabric Tackboard Panels = Rounded Peninsula Conference Table = Pedestal Support Base = Credenza Return Unit = Lateral File Drawers And Storage Drawers = Integrated Wire Management Channel = Includes Power Strip And Hanging File Folders = Measures 92" x 113" = Buyer Responsible For Disassembly And Removal
Notes
 

#84 • Vevor Ice Maker And Brio Water Dispenser

= Model ZBJ60KGSYPPSB0001V1 = Includes Brio CLPOU420UVF2 Water Purifier = Both Working Condition
Notes
 

#85 • Paper Shredders

= Royal Paper Shredder = Model MC14MX = Ativa Paper Shredder = Model A12CC19
Notes
 

#86 • Heat Storm Infrared Heater

= Heat Storm Outdoor Infrared Electric Heater = Model Number HS-1500-OTR-TRI = 1500 Watts Power Rating = 120 Volts 60 Hz = Date Of Manufacture 2024-06 = Includes Adjustable Metal Tripod Stand
Notes
 

#87 • Portable Electric Space Heaters

= Lasko Ceramic Tower Heaters = Lasko Digital Ceramic Heater = Lasko Compact Heater With Handle = Perfect Aire Radiant Wire Mesh Heater = Pelonis Radiant Honeycomb Mesh Heater = Geneva Utility Heater With Rotary Controls
Notes
 

#88 • Dry-Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes
 

#89 • Dry Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes

 

 

#90 • Dry Erase Boards

= Three Whiteboards = Aluminum Frames = Dry-Erase Surfaces = Includes Attached Marker Trays = Measures 48" x 48"
Notes

Auction License: Missouri
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Rollstock Liquidation Auction

Oldham Auctions

Oldham Auctions


Contact: Brody Oldham
Phone: 816-935-7439
Sale Location
5720 Brighton Ave
Kansas City, MO 64130
Sale Dates and Times
Sale Terms and Conditions
OLDHAM AUCTIONS TERMS & CONDITIONS Oldham Auctions and Seller(s) disclose all items are sold as is, where is. No guarantees and/or warranties are expressed or implied, and all sales are final. It is the buyers' responsibility to inspect all items prior to bidding to determine actual current condition, all faults, all defects, and any errors of description. It is the buyers' responsibility to place bids accordingly and correctly. Bids are not allowed to be retracted unless authorized by Oldham Auctions. All payment must be made by the stated date. Payment may be made by, Cash, Approved Personal or Company Check, Money Order, Wire Transfer, MasterCard, Visa, Discover, American Express. By agreeing to these terms, the Buyer waives the right to initiate a credit card chargeback for any reason. All disputes must be resolved directly with Oldham Auctions according to the terms listed herein. 3.5% charge is added to all credit card transactions. Credit cards are not accepted forms of payment on titled items or any invoice totaling over $2,000.00. 10% buyers' premium is charged and will be added to the final bid amount after sales tax, but will not exceed $1000 per item. All items must be removed by specified removal date, unless otherwise noted or special provisions have been made. Restocking fees equal to the purchase price plus applicable hauling and storage fees are applied for items left behind by the buyer or not picked up within the stated time. $20.00 per week storage fee will be charged to the buyer for any item(s) left at the Oldham Auctions Warehouse in Odessa, MO Unpaid and/or items that have not been picked-up by the winning bidder within the scheduled pick-up day/time will be considered abandoned with no entitlement of any refunds to the original buyer. Restocking fee equal to the purchase price plus applicable hauling and storage fees will be charged to the buyer credit card for any items not paid for in full within the scheduled day of pick-up. Risk of loss or damage to any item passes to the Buyer immediately upon the fall of the hammer or when the lot is declared sold. Oldham Auctions is not responsible for theft, vandalism, or damage to items remaining on the premises after the sale concludes, even if the Buyer has not yet removed them. Odometer readings and hour meter readings are listed as they appear on the equipment at the time of listing. These are not guaranteed to be accurate or actual. It is the Buyer’s responsibility to verify actual hours/miles during their personal inspection. Absentee bids, proxy bids, and online bids are legal and binding. The winning bidder must pay for the item(s) in full before removal. It is the buyers’ responsibility to keep their profile up-to-date with correct contact & billing information. You are solely responsible for maintaining the confidentiality of your username and password. You are fully responsible for all activities that occur under your account. Oldham Auctions is not liable for any loss or damage arising from your failure to comply with this section. Buyers will be barred from Oldham Auctions and legal action may be taken for but not limited to default of payment, tampering of the auction process, or any other action intended to harm Oldham Auctions LLC, Sellers’, or Buyers’. Oldham Auctions reserves the right to reject any bid, decline registration, or ban any bidder from participating in current or future auctions at our sole discretion, for any reason, and without prior notice. We are under no obligation to provide an explanation for such actions. Collusion, shill bidding, or any form of price manipulation between Buyers is strictly prohibited. Oldham Auctions reserves the right to cancel any bids or ban any users suspected of participating in such activities. The use of software, bots, spiders, or any automated system to place bids ("snipping tools") or scrape data from this website is strictly prohibited. Oldham Auctions reserves the right to immediately terminate any account suspected of such activity and invalidate associated bids. You agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated, or representative action. You hereby waive any right to a jury trial. Shipping & handling is available for "small" items. Call or text Oldham Auctions with the "lot" number you are interested in prior to bidding. Shipping is available but only on certain items and only upon clearance of funds, and at the buyers expense. Buyers and all individuals participating and/or attending the auction agree to hold harmless Oldham Auctions LLC, all staff members, all associates, and owners/sellers of the property from any liability, including but not limited to bodily harm, personal injury, disease and/or illness or sickness, loss, breakage, damage, mechanical issues, theft, fire, or any other occurrence. Oldham Auctions LLC, all staff members, all associates, and owners/sellers shall not be responsible in any manner for any type of damages, caused in whole or in part, by the packing, shipping, loading or transporting of any items once they have been purchased by the buyer. Oldham Auctions staff are not obligated to assist with loading. If staff assists, they do so at the buyer's sole risk, and Oldham Auctions assumes no liability for damage to the item or buyer's vehicle during the process. Oldham Auctions LLC is providing Internet bidding as a service to the Bidder(s). Bidder(s) acknowledges and understands that this service may or may not function correctly during the auction. Under no circumstances shall Bidder(s) have any claim against Oldham Auctions LLC or anyone else if the Internet service fails to work correctly before or during the auction. Oldham Auctions will not be responsible for any missed bids from any source. Oldham Auctions is not responsible for any interruption in service, errors, or omissions caused by any means and does not guarantee continual, uninterrupted, or error-free service or use of the site. We are not liable for any failure or delay in performance due to causes beyond our reasonable control, including but not limited to: acts of God, power outages, internet service provider failures, server crashes, software glitches, cyber-attacks, or government restrictions. In the event of a technology failure during the closing of an auction, Oldham Auctions reserves the right to void bids, reopen bidding, or extend the auction closing time at our sole discretion. Oldham Auctions reserves the right to extend, pause, or remove the auction and/or individual items at any time due to any unforeseen circumstances. Any legal disputes arising from this auction shall be settled in the courts of Lafayette County, Missouri. Both parties waive their right to a jury trial and agree that the laws of the State of Missouri shall govern. Bidding will close out 1 item per minute starting at 7:00pm CST. Bidding is extended 2 minutes if a bid is placed on an item in the last remaining minutes. This prevents "Snipping", and keeps the bidding process fair for all the buyers. If any provision of these Terms & Conditions is found to be unenforceable or invalid by a court of competent jurisdiction, such invalidity shall not affect the remaining provisions, which shall remain in full force and effect. By registering, you consent to the collection and use of your personal information by Oldham Auctions for the purpose of processing transactions and notifying you of future auctions. We do not sell, trade, or rent your personal identification information to third parties. Buyer agrees upon registration and placing bids, you certify that you are at least 18 years of age and have the legal capacity to enter into a binding contract, and to be bound by the terms and conditions of this auction. We want everyone to enjoy their online experience, please contact us prior to bidding if you have any questions.
Listing Details

ROLLSTOCK LIQUIDATION

Wednesday, Nov. 11th

Visit www.oldhamauctions.com

Haas Vertical CNC Machine, Mori Seiki CNC Machine, Tooling, Nice Selection Of Shop Equipment and Tools, Shelving, Office Furniture and Supplies, And More!!!

 

#2 • Mori Seiki CNC

= Model MV-55/50 = Seller States Working Condition/Currently Disconnected = Serial Number 1527 = Three Phase Electric = 60 Hz Frequency = 220 Volts AC = 33.5 KVA Rated Power = Fanuc CNC Control Console = Includes Chip Conveyor = Includes Hydraulic Power Unit = Includes Sidewinder 8 Inch Tube Skimmer = Includes Renishaw IMM Module = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#3 • Haas Vertical CNC

= Model VF-3 = Seller States Working Condition/Currently Disconnected = Serial Number 3588 = Date Of Manufacture 09/1994 = 15 Horsepower High Torque = 208/230 Volts = 3 Phase = 50/60 Hertz = Full Load 30 Amps = Largest Load 20 Amps = Includes Clamping Kit, Tooling, Haas Gear Oil, And Coolant Pump = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#4 • CNC Milling Tools And Cutters

= Assorted Tooling = Collet Chuck Tool Holders = End Mill Tool Holders = Shell And Face Mill Arbors = Indexable Face Milling Cutters = Drill Chucks And Tapping Heads = Extension Sleeves And Tool Adapters = Includes Mounted Drills, Cutters, And Touch Probe = Do Your Homework $$
Notes
 

#5 • Cnc Tools And Milling Accessories

= Assorted Tooling = Right-Angle Milling Head Attachment = Indexable Face Mill Cutters = Collet Chucks = End Mill Holders = Drill Chucks = Includes Twist Drill Bits, End Mills, And Slot Cutters = Do Your Homework $$
Notes
 

#6 • CNC Tools And Machining Accessories

= Assorted Tooling = Lisa X - 1049 ISO SK 50 Tool Holder = Extended Collet Chuck Tool Holder = Adapter Sleeve Tool Holder = Benchtop Tool Holder Rack = Includes Drill Bits, Collet Chucks, Bushings, Spanner Wrenches, Chuck Keys, Hardware, And Accessories = Do Your Homework $$
Notes
 

#7 • CNC Tools

= Assorted Tooling = Steep Taper CNC Tool Holders = Collet Chucks And Extension Sleeves = End Mill Adapters And Arbors = Includes Metal Storage Rack = Includes Mounted Cutters And Drill Bits = Do Your Homework $$
Notes
 

#8 • Tooling/Hardware

= Assorted Tooling Hardware = Hamai Clamping Hardware = Serrated Step Blocks And Clamps = Threaded Setup Studs And Coupling Nuts = Lathe Roller Rest Assembly = Includes Setup Tooling, Roller Rest, And Storage Bins
Notes
 

#9 • RK Machinery 10 Ton Press

= Model HFP-10T = Serial Number 070322301T = 10 Ton Capacity = 2 HP Baldor Electric Motor = 115/230 Volts = Single Phase = 1725 RPM = Pressure Gauge Shows 0 PSI = Includes Steel Press Blocks And Tooling Bar = Measures 40" x 66" = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#10 • Jet Vertical Bandsaw

= Model VBS-350 = Serial Number 352583 = Vertical Bandsaw = Integrated Blade Welder = Welder Voltage 110-115 V = Welder Capacity 1/8 To 5/8 Inch (3 To 16 Mm) = Grooved Cast Metal Work Table = Adjustable Blade Guide Assembly = Top Blade Tension Handwheel = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#11 • Jet Belt And Disc Sander

= Model J-4200A-2 = Stock Number 414552 = Serial Number 21110108 = 6" X 48" Belt = 12" Disc = 1-1/2 Horsepower Motor = Single Phase = 230 Volt = Includes Cabinet Stand = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#12 • Porter-Cable Air Compressor

= Model CPLKC7080V2 = Serial Number 0920282075 = 80 Gallon Capacity = 7 Peak Horsepower = 175 PSI Maximum Pressure = 240 Volts, 30 Amps, Single Phase = Includes Regulator And Filter Assembly = Includes Hose = Buyer Responsible For Disassembly = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#13 • Dayton Blast Cabinet With Dust Collector

= Maximum Pressure 120 PSI = Minimum Pressure 5 PSI = Arm Ports With Protective Gloves = Hopper Bottom With Slide Gate = Foot Pedal Control = SMC Pneumatic Regulator And Solenoid Valve = Includes Econo Dust Collector And Hose = Measures 43"W x 26" x 66"T = Buyer Responsible For Disassembly And Removal = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#14 • Ridgid 10 In. Table Saw

= Model R4512 = 10 In. Blade Diameter = 3450 RPM = 120 / 240 V = Integrated Mobile Base Stand = Includes Rip Fence And Miter Gauge
Notes
 

#15 • Hitachi Compound Miter Saw

= Model C10FCH2 = Compound Miter Saw = Integrated Laser Guide = Cast Turntable Base With Angle Gauge = Includes Dust Collection Bag
Notes
 

#16 • DeWalt 14" Abrasive Chop Saw

= Model DW871 Type 1 = Serial Number 431255 = 120 V AC/DC = 15 Amps = 3800 RPM = 14 Inch Cutting Wheel Capacity = 1 Inch Arbor Size = Integrated Material Clamping Vise = Includes Abrasive Metal Cutting Wheel
Notes
 

#17 • Jepson Power Circular Saw

= Model SHDC8320 = Serial Number 21040041 = Voltage 110-120V = Frequency 50-60Hz = Power Rating 1700W = Speed 1700 RPM = Saw Blade Diameter 320mm = Maximum Cutting Depth 120mm = Includes Instruction Manual
Notes
 

#18 • Black & Decker Professional Chop Saw

= Black & Decker Professional Chop Saw = Integrated Material Vise Clamp With Hand Crank = Pivoting Cutting Head = Metal Blade Guard = Top Operating Handle With Trigger Switch = Secondary Side D-Handle
Notes
 

#19 • Dyna-Glo Forced Air Heater

= Model KFA50DGD = 50,000 BTU Rating = 5.0 Gallon Fuel Tank Capacity = 0.38 Gallon Per Hour Fuel Consumption = 120VAC 60Hz Power Requirement
Notes
 

#20 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Capacity 400 / 480 M3/H = Motor Output 11.0 / 13.2 KW = Speed 970 / 1165 RPM = Pressure Rating 0.5 / 10 Mbar = Pressure Gauge Shows 0.85 Bar = Includes Telemecanique Switch Box
Notes
 

#21 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Serial Number 03 600908520001 = Capacity 400/480 M³/h = Vacuum Range 0.5/10 Mbar = Power Rating 11.0/13.2 KW = Operating Speed 970/1165 RPM = Baldor Drive Motor = Pressure Gauge Shows 0 Bar = Includes Telemecanique Switch Box
Notes
 

#22 • Pioneer Refrigerant Air Dryer

= Model R 100A = Serial Number B9321253A = 1/2 Horsepower Compressor = 115 Volts = 1 Phase = 250 PSI Maximum Pressure = Low Side Design Pressure 150 PSI = High Side Design Pressure 450 PSI = R-22 Factory Charge = Refrigerant Suction Pressure Gauge Shows Approx. 50 PSI
Notes
 

#23 • Scaffolding Frames With Deck And Hardware

= Steel Scaffolding End Frames = Platform Deck = Cross Bracing Components = Perforated Steel Posts = Includes Pins And Casters = Nice Clean Set $$
Notes
 

#24 • Aluminum Diamond Plate Dock Plate

= Welded Aluminum Construction = Diamond Tread Plate Deck = Raised Side Curbs = Underside Locking Stop Plates = Corner Shackle Attachment Points = Includes Durabilt Polyester Lifting Straps = Measures 5' x 5'
Notes
 

#25 • Uline 3-Step Rolling Safety Ladder

= Brand: Uline = Three-Step Rolling Safety Ladder = 350 Lbs Maximum Load = Capacity One Person = Perforated Steel Slip-Resistant Steps = Top Safety Platform = Dual Tubular Handrails = Spring-Loaded Front Casters = Rubber Tipped Legs = Made In The U.S.A.
Notes
 

#26 • Cotterman Two-Step Industrial Platform

= Cotterman Two-Step Work Platform = Steel Frame Construction = Serrated Diamond Grip-Strut Safety Grate Steps = Bolted Frame Assembly = Threaded Adjustable Leveling Foot = Capacity 1 Person = Made In The U.S.A. = Measures 48" x 24" x 21"
Notes
 

#27 • Industrial Steel Platform Cart

= Industrial Platform Cart = Steel Channel Frame = Flat Platform Deck = Tubular Steel Handle = Center Upright Post = Undermount Caster Wheels = Measures 5' x 30"
Notes
 

#28 • Jepson Premium Super Dry Cutter And Bench

= Jepson Premium Super Dry Cutter Metal Saw = Screw Type Material Vise Clamp = Clear Chip Shield And Blade Guard = 14 Inch Blade Capacity = Includes Wooden Workbench With Shelf = Includes Lenox Circular Saw Blades = Includes CGW Abrasives Cutting Wheels = Includes Bar Clamp = Measures 75" x 24" x 34"T
Notes
 

#29 • Industrial Steel Top Workbench

= Industrial Steel Workbench = Steel Plate Tabletop = Welded Steel Frame = Lower Storage Shelf = Measures 6'W x 4' x 39"T
Notes
 

#30 • Industrial Steel Welding Work Table

= Heavy Steel Plate Tabletop = Pre-Drilled Mounting Holes Along Outer Edges = Welded Square-Tube Steel Frame = Lower Tubular Horizontal Stretchers = Measures 49" x 5' x 34"T
Notes
 

#31 • Rolling Tubular Metal Utility Cart

= Tubular Metal Frame = Carpeted Top Platform = Lower Slatted Shelf = Four Swivel Caster Wheels = Measures 36" x 18.5" x 30"T
Notes
 

#32 • Uline Two Shelf Utility Cart

= Brand: Uline = Two Deep Lipped Basin Shelves = Molded Push Handle With Storage Compartments = Four Upright Corner Support Legs = Four Caster Wheels = Measures 25" x 42" x 33"T
Notes
 

#33 • Aero-Motive Hose Reels

= Aero-Motive Econ-O-Mite Hose Reels = Two Units Included = Model D535 = Model D633 = Includes Air Hoses, Brass Couplers, And Valve
Notes
 

#34 • Wilton C1 Bullet Swivel Base Bench Vise

= Brand Wilton = Model C1 = 5.5" Jaw = Bullet Style Bench Vise = Swivel Base Mechanism = Integrated Anvil Surface = Includes Metal Soft Jaw Caps = Includes Mounting Bolts With Nuts And Washers
Notes
 

#35 • HTC Roller Support Stands

= Quantity: Two Roller Stands = Brand: HTC = Model: HSS-18 = Series: Wedge Lock Super Duty = Steel Conveyor Roller Top = Telescoping Height Adjustment Column = Manual Adjustment Crank Handle = Four Leg Steel Base With Leveling Feet
Notes
 

#36 • Roller Support Stands

= Brand HTC = Model HSS-18 = Super Duty Roller Support = Cylindrical Steel Roller = Telescoping Height Adjustment = Four Point Base With Leveling Feet = Includes Adjustable Roller Stand
Notes
 

#37 • Pallet Of Red Plastic Storage Crates

= Pallet Lot Of Red Molded Plastic Crates = Ribbed Wall Construction = Massive Collection = Do Your Homework $ = See Photos For Description
Notes
 

#38 • Plastic Parts Bins In Wooden Crates

= Plastic Parts And Storage Bins = Molded Construction With Ribbed Exterior = Nested Stacking Configuration = Includes Two Wooden Shipping Crates
Notes
 

#39 • Plastic Parts Bins In Wooden Crates

= Molded Plastic Parts Bins = Two Wooden Pallet Storage Crates = Multiple Bin Sizes = Includes Plastic Insert Containers = Includes Hardware Fasteners
Notes
 

#40 • Plastic Storage Bins

= Molded Plastic Parts Organizer Bins = Modular Plastic Containers With Dividers = Includes Telescoping Plastic Parts Storage Tubes = Two Plywood Pallet Crates = Integrated Pallet Skids = Metal Corner Reinforcement Brackets = Braided Rope Handles
Notes
 

#41 • Plastic Parts Storage Bins In Crate

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#42 • Plastic Parts Storage Bins

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#43 • Uline Shelf Bin Dividers And Bins

= Model S-19944D = Uline Shelf Bin Dividers = Dimensions 11 Inch By 4 Inch = Includes Akro-Mils Plastic Storage Bins = Includes Wooden Crate
Notes
 

#44 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 26 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#45 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 19 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#46 • Industrial Steel Shelving Unit

= Industrial Steel Shelving Unit = Two Slotted Upright Frames = Diagonal Cross Bracing = Three Shelf Tiers = Six Horizontal Steel Beams = Measures 151"W x 29"D x 8'
Notes
 

#47 • Industrial Shelving Unit

= Brand Uline = Five Shelf Tiers = Four Upright Posts = Measures 25" x 8' x 7'T
Notes
 

#48 • Industrial Steel Shelving Unit

= Steel Industrial Shelving Unit = Five Tier Storage Rack = Measures 6' x 2' x 6'
Notes
 

#49 • Uline 4-Tier Rolling Wire Shelving Cart

= Four-Tier Wire Shelving Unit = Tubular Corner Posts = Uline Swivel Caster Wheels = Measures 24" x 36" x 68"
Notes
 

#50 • Multi Compartment Metal Storage Cabinet

= Industrial Multi Compartment Cabinet = Sheet Metal Construction = Multiple Hinged Access Doors = Twist Latch Closures = Knockout Mounting Slots = See Photos For Condition (Has Some Damage) = Measures 31" x 21"x 7'
Notes
 

#51 • Kennedy Steel Shop Desk Cabinet

= Kennedy Brand = Steel Construction = Upper Tiered Organizer Shelf = Sloped Desktop Surface = Single Drawer With Lock = Lower Double Door Storage Cabinet = Center Turn Handle Latch = Four Square Support Legs = Measures 53"T x 29" x 35"
Notes
 

#52 • Industrial Steel Standing Shop Desk

= Sheet Steel Construction = Sloped Writing Surface = Upper Pigeonhole Organizer Riser = Single Slide-Out Storage Drawer = Lower Support Shelf = Four-Legged Steel Base = Measures 35"W x 29.5"D x 53"T
Notes
 

#53 • Industrial Pedestal Fans

= Quantity Of Three Industrial Pedestal Fans = Dayton Model 2LY94B Commercial Air Circulator = Dayton Fan Diameter 16" = Includes Round Pedestal Bases With Wheels = See Photos For Description/Condition
Notes
 

#54 • Dayton 16 In Pedestal Fans

= Dayton Light Commercial Air Circulator = Model 2LY94B = Quantity Of Two = 16 Inch Fan Diameter = Three Speed Settings = Adjustable Pedestal Pole With Wheeled Base
Notes
 

#55 • Dayton Commercial Fan

= Model 2LY97B = Commercial Air Circulator With Pedestal Base = 24" Fan Diameter = Three Blade Assembly
Notes
 

#56 • Dayton 30" Mobile Circulator Fan

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#57 • Dayton 30" Mobile Air Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#58 • Dayton 30 In Mobile Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#59 • Dayton 30" Mobile Air Circulator

= Model 2MA12 = 30" Light Commercial Mobile Air Circulator = Three Speed Settings
Notes
 

#60 • FlowPro High Velocity Drum Fan

= FlowPro High Velocity Air Circulator = Model 10380 = Electrical 120V 60Hz 3.0A = Two Speed Settings High And Low = Mobile Base With Wheels
Notes
 

#61 • WorkSmart 30" Swivel Blower Fan

= Model FE-75DC1-1(A) = 30 Inch Diameter = Direct Drive Swivel Blower = 120 Volts At 60 Hz = 1/3 Horsepower Motor = Two Speed Settings
Notes
 

#62 • Simple Deluxe 18" Fans

= Model HIFANXWALLMOUNT18 = Quantity Of Three = 18 Inch Wall Mounted Fan = 115 VAC 60 HZ = 110 Watts = Thermally Protected = Pull Chain Switch = Adjustable Mounting Brackets
Notes
 

#63 • Sperian Pure Flow Eyewash Station

= Manufacturer Sperian Honeywell = Model Pure Flow 1000 = Includes Wall Mounting Bracket = Buyer Responsible For Removal (Bring Tools)
Notes
 

#64 • Sperian Pure Flow Eyewash Station

= Brand Sperian Honeywell = Model Fendall Pure Flow 1000 = Part Number 32-001050-0000 = Includes Cartridges And Wall Mount Bracket
Notes
 

#65 • Justrite 4 Drum Workstation

= Model H-4037 = Justrite 4 Drum Spill Containment Workstation Sump Capacity 49 Gallons = Load Capacity 6,000 Lbs = Made In USA = Includes Two Removable Grates
Notes
 

#66 • Commercial Trash Cans With Dollies

= Four Commercial Utility Containers = Heavy-Duty Plastic Construction = Molded Side Handles = Includes Four Wheeled Dolly Bases With Swivel Casters
Notes
 

#67 • Commercial Trash Cans With Dollies

= Four Molded Plastic Utility Containers = Integrated Side Handles = Reinforced Rims = Includes Four Wheeled Caster Dollies
Notes
 

#68 • Utility Trash Cans

= Commercial Plastic Utility Containers = 55 Gallon Capacity = 32 Gallon Capacity = Integrated Side Handles = Includes Wheeled Caster Dollies
Notes
 

#69 • Assorted Hand Tools

= Assorted Hand Tools= Razor-Back 7" Mortar Hoe = Includes Rubbermaid Commercial Products Caution Wet Floor Sign = Includes Square Point Shovel = Includes Brooms = Includes Stand-Up Metal Dustpan = Includes Floor Scrapers And Utility Handles = And More
Notes
 

#70 • Assorted Commercial Cleaning And Maintenance Tools

= Commercial Dust Mops = Push Brooms = Floor Squeegees = Plastic Snow Shovels With D-Grip Handles = Upright Lobby Dustpan = Metal Floor Scraper = Includes Additional Tool Handles
Notes
 

#71 • Mule Wheeled Pry Lever

= Tapered Wooden Lever Handle = Heavy Steel Nose Plate = Upturned Front Pry Lip = Dual Metal Roller Wheels = Underside Transverse Axle = Four Rivet Plate Fastening = Measures 7'L
Notes
 

#72 • Greenlee Conduit Bender

= Model 8843 = 1-1/4" EMT Conduit Capacity = 1" Rigid Conduit Capacity = Cast Metal Bender Head = Tubular Steel Handle = Includes Gardner Bender Conduit Bender With Handle
Notes
 

#73 • Dual Work Light Stands

= Brand Regent = Model Number TC51000 = Dual Halogen Fixtures = Telescoping Tripod Stand = One May Need Repaired/Bulbs
Notes
 

#74 • Rotary Drum Pump, Grease Gun And Hammer

= Rotary Drum Pump With Curved Discharge Spout = Threaded Suction Pipe Section = Manual Hand Crank = Includes Lever-Action Grease Gun With Flexible Extension Hose = Includes Ball-Peen Hammer With Wooden Handle
Notes
 

#75 • Tuthill Fuel Transfer Pumps

= Brand: Tuthill Corporation Fill-Rite Division = Series 100 = Model 112 = Compatible With Gasoline, Diesel Fuel, Fuel Oil, Lubricating Oil, And Kerosene = Includes Lever-Action Hand Pump = Includes Dispensing Hose And Suction Pipes
Notes
 

#76 • Hanging Packing Peanut Dispenser Hopper

= Heavy Fabric Hopper = Overhead Suspension Chains = Top Spreader Rods = Clear Ribbed Discharge Chute = Hose Clamp And Valve Assembly = Includes Packing Peanuts
Notes
 

#77 • Welded Steel Wheeled Dollies

= Welded Steel Frame Dollies = Two Units Included = Tubular Steel Construction = Four Swivel Caster Wheels Per Unit = Measures 24" x 24" And 24" x 16"
Notes
 

#78 • Assorted Pneumatic Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#79 • Assorted Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#80 • Ratcheting Tie Down Straps

= Assorted Straps (Great Condition ) = Ratcheting Tie Down Straps = Dimensions Of 2 In. X 27 Ft. = Working Load Limit Of 3,300 Lb. And 3,333 Lb. = Breaking Strength Of 10,000 Lb.
Notes
 

#81 • Scotts Turf Builder Seeder

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#82 • Scotts EdgeGuard Mini Spreader

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#83 • Modular Desk Suite With Hutch And Peninsula

= Modular Executive Workstation System = Upper Storage Hutch With Cabinet Doors = Fabric Tackboard Panels = Rounded Peninsula Conference Table = Pedestal Support Base = Credenza Return Unit = Lateral File Drawers And Storage Drawers = Integrated Wire Management Channel = Includes Power Strip And Hanging File Folders = Measures 92" x 113" = Buyer Responsible For Disassembly And Removal
Notes
 

#84 • Vevor Ice Maker And Brio Water Dispenser

= Model ZBJ60KGSYPPSB0001V1 = Includes Brio CLPOU420UVF2 Water Purifier = Both Working Condition
Notes
 

#85 • Paper Shredders

= Royal Paper Shredder = Model MC14MX = Ativa Paper Shredder = Model A12CC19
Notes
 

#86 • Heat Storm Infrared Heater

= Heat Storm Outdoor Infrared Electric Heater = Model Number HS-1500-OTR-TRI = 1500 Watts Power Rating = 120 Volts 60 Hz = Date Of Manufacture 2024-06 = Includes Adjustable Metal Tripod Stand
Notes
 

#87 • Portable Electric Space Heaters

= Lasko Ceramic Tower Heaters = Lasko Digital Ceramic Heater = Lasko Compact Heater With Handle = Perfect Aire Radiant Wire Mesh Heater = Pelonis Radiant Honeycomb Mesh Heater = Geneva Utility Heater With Rotary Controls
Notes
 

#88 • Dry-Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes
 

#89 • Dry Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes

 

 

#90 • Dry Erase Boards

= Three Whiteboards = Aluminum Frames = Dry-Erase Surfaces = Includes Attached Marker Trays = Measures 48" x 48"
Notes
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Rollstock Liquidation Auction
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Oct 20 , 12:00 PM
Bidding Ends: Wednesday Nov 11 , 7:00 PM
Sale Location
5720 Brighton Ave
Kansas City, MO 64130
Listing Terms and Conditions
OLDHAM AUCTIONS TERMS & CONDITIONS Oldham Auctions and Seller(s) disclose all items are sold as is, where is. No guarantees and/or warranties are expressed or implied, and all sales are final. It is the buyers' responsibility to inspect all items prior to bidding to determine actual current condition, all faults, all defects, and any errors of description. It is the buyers' responsibility to place bids accordingly and correctly. Bids are not allowed to be retracted unless authorized by Oldham Auctions. All payment must be made by the stated date. Payment may be made by, Cash, Approved Personal or Company Check, Money Order, Wire Transfer, MasterCard, Visa, Discover, American Express. By agreeing to these terms, the Buyer waives the right to initiate a credit card chargeback for any reason. All disputes must be resolved directly with Oldham Auctions according to the terms listed herein. 3.5% charge is added to all credit card transactions. Credit cards are not accepted forms of payment on titled items or any invoice totaling over $2,000.00. 10% buyers' premium is charged and will be added to the final bid amount after sales tax, but will not exceed $1000 per item. All items must be removed by specified removal date, unless otherwise noted or special provisions have been made. Restocking fees equal to the purchase price plus applicable hauling and storage fees are applied for items left behind by the buyer or not picked up within the stated time. $20.00 per week storage fee will be charged to the buyer for any item(s) left at the Oldham Auctions Warehouse in Odessa, MO Unpaid and/or items that have not been picked-up by the winning bidder within the scheduled pick-up day/time will be considered abandoned with no entitlement of any refunds to the original buyer. Restocking fee equal to the purchase price plus applicable hauling and storage fees will be charged to the buyer credit card for any items not paid for in full within the scheduled day of pick-up. Risk of loss or damage to any item passes to the Buyer immediately upon the fall of the hammer or when the lot is declared sold. Oldham Auctions is not responsible for theft, vandalism, or damage to items remaining on the premises after the sale concludes, even if the Buyer has not yet removed them. Odometer readings and hour meter readings are listed as they appear on the equipment at the time of listing. These are not guaranteed to be accurate or actual. It is the Buyer’s responsibility to verify actual hours/miles during their personal inspection. Absentee bids, proxy bids, and online bids are legal and binding. The winning bidder must pay for the item(s) in full before removal. It is the buyers’ responsibility to keep their profile up-to-date with correct contact & billing information. You are solely responsible for maintaining the confidentiality of your username and password. You are fully responsible for all activities that occur under your account. Oldham Auctions is not liable for any loss or damage arising from your failure to comply with this section. Buyers will be barred from Oldham Auctions and legal action may be taken for but not limited to default of payment, tampering of the auction process, or any other action intended to harm Oldham Auctions LLC, Sellers’, or Buyers’. Oldham Auctions reserves the right to reject any bid, decline registration, or ban any bidder from participating in current or future auctions at our sole discretion, for any reason, and without prior notice. We are under no obligation to provide an explanation for such actions. Collusion, shill bidding, or any form of price manipulation between Buyers is strictly prohibited. Oldham Auctions reserves the right to cancel any bids or ban any users suspected of participating in such activities. The use of software, bots, spiders, or any automated system to place bids ("snipping tools") or scrape data from this website is strictly prohibited. Oldham Auctions reserves the right to immediately terminate any account suspected of such activity and invalidate associated bids. You agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated, or representative action. You hereby waive any right to a jury trial. Shipping & handling is available for "small" items. Call or text Oldham Auctions with the "lot" number you are interested in prior to bidding. Shipping is available but only on certain items and only upon clearance of funds, and at the buyers expense. Buyers and all individuals participating and/or attending the auction agree to hold harmless Oldham Auctions LLC, all staff members, all associates, and owners/sellers of the property from any liability, including but not limited to bodily harm, personal injury, disease and/or illness or sickness, loss, breakage, damage, mechanical issues, theft, fire, or any other occurrence. Oldham Auctions LLC, all staff members, all associates, and owners/sellers shall not be responsible in any manner for any type of damages, caused in whole or in part, by the packing, shipping, loading or transporting of any items once they have been purchased by the buyer. Oldham Auctions staff are not obligated to assist with loading. If staff assists, they do so at the buyer's sole risk, and Oldham Auctions assumes no liability for damage to the item or buyer's vehicle during the process. Oldham Auctions LLC is providing Internet bidding as a service to the Bidder(s). Bidder(s) acknowledges and understands that this service may or may not function correctly during the auction. Under no circumstances shall Bidder(s) have any claim against Oldham Auctions LLC or anyone else if the Internet service fails to work correctly before or during the auction. Oldham Auctions will not be responsible for any missed bids from any source. Oldham Auctions is not responsible for any interruption in service, errors, or omissions caused by any means and does not guarantee continual, uninterrupted, or error-free service or use of the site. We are not liable for any failure or delay in performance due to causes beyond our reasonable control, including but not limited to: acts of God, power outages, internet service provider failures, server crashes, software glitches, cyber-attacks, or government restrictions. In the event of a technology failure during the closing of an auction, Oldham Auctions reserves the right to void bids, reopen bidding, or extend the auction closing time at our sole discretion. Oldham Auctions reserves the right to extend, pause, or remove the auction and/or individual items at any time due to any unforeseen circumstances. Any legal disputes arising from this auction shall be settled in the courts of Lafayette County, Missouri. Both parties waive their right to a jury trial and agree that the laws of the State of Missouri shall govern. Bidding will close out 1 item per minute starting at 7:00pm CST. Bidding is extended 2 minutes if a bid is placed on an item in the last remaining minutes. This prevents "Snipping", and keeps the bidding process fair for all the buyers. If any provision of these Terms & Conditions is found to be unenforceable or invalid by a court of competent jurisdiction, such invalidity shall not affect the remaining provisions, which shall remain in full force and effect. By registering, you consent to the collection and use of your personal information by Oldham Auctions for the purpose of processing transactions and notifying you of future auctions. We do not sell, trade, or rent your personal identification information to third parties. Buyer agrees upon registration and placing bids, you certify that you are at least 18 years of age and have the legal capacity to enter into a binding contract, and to be bound by the terms and conditions of this auction. We want everyone to enjoy their online experience, please contact us prior to bidding if you have any questions.

ROLLSTOCK LIQUIDATION

Wednesday, Nov. 11th

Visit www.oldhamauctions.com

Haas Vertical CNC Machine, Mori Seiki CNC Machine, Tooling, Nice Selection Of Shop Equipment and Tools, Shelving, Office Furniture and Supplies, And More!!!

 

#2 • Mori Seiki CNC

= Model MV-55/50 = Seller States Working Condition/Currently Disconnected = Serial Number 1527 = Three Phase Electric = 60 Hz Frequency = 220 Volts AC = 33.5 KVA Rated Power = Fanuc CNC Control Console = Includes Chip Conveyor = Includes Hydraulic Power Unit = Includes Sidewinder 8 Inch Tube Skimmer = Includes Renishaw IMM Module = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#3 • Haas Vertical CNC

= Model VF-3 = Seller States Working Condition/Currently Disconnected = Serial Number 3588 = Date Of Manufacture 09/1994 = 15 Horsepower High Torque = 208/230 Volts = 3 Phase = 50/60 Hertz = Full Load 30 Amps = Largest Load 20 Amps = Includes Clamping Kit, Tooling, Haas Gear Oil, And Coolant Pump = Notes: We Are Told That This Machine Was Working Just Fine When It Was Disconnected. The Winning Bidder Is Responsible For Disassembling and Removal Without Doing Any Damage To The Property or Building. The Buyer Of This Machine Will Have Until Friday, Nov. 20th For Removal. The CNC Will Not Be Allowed To Leave The Property Until Funds Have Cleared Our Account.
Notes
 

#4 • CNC Milling Tools And Cutters

= Assorted Tooling = Collet Chuck Tool Holders = End Mill Tool Holders = Shell And Face Mill Arbors = Indexable Face Milling Cutters = Drill Chucks And Tapping Heads = Extension Sleeves And Tool Adapters = Includes Mounted Drills, Cutters, And Touch Probe = Do Your Homework $$
Notes
 

#5 • Cnc Tools And Milling Accessories

= Assorted Tooling = Right-Angle Milling Head Attachment = Indexable Face Mill Cutters = Collet Chucks = End Mill Holders = Drill Chucks = Includes Twist Drill Bits, End Mills, And Slot Cutters = Do Your Homework $$
Notes
 

#6 • CNC Tools And Machining Accessories

= Assorted Tooling = Lisa X - 1049 ISO SK 50 Tool Holder = Extended Collet Chuck Tool Holder = Adapter Sleeve Tool Holder = Benchtop Tool Holder Rack = Includes Drill Bits, Collet Chucks, Bushings, Spanner Wrenches, Chuck Keys, Hardware, And Accessories = Do Your Homework $$
Notes
 

#7 • CNC Tools

= Assorted Tooling = Steep Taper CNC Tool Holders = Collet Chucks And Extension Sleeves = End Mill Adapters And Arbors = Includes Metal Storage Rack = Includes Mounted Cutters And Drill Bits = Do Your Homework $$
Notes
 

#8 • Tooling/Hardware

= Assorted Tooling Hardware = Hamai Clamping Hardware = Serrated Step Blocks And Clamps = Threaded Setup Studs And Coupling Nuts = Lathe Roller Rest Assembly = Includes Setup Tooling, Roller Rest, And Storage Bins
Notes
 

#9 • RK Machinery 10 Ton Press

= Model HFP-10T = Serial Number 070322301T = 10 Ton Capacity = 2 HP Baldor Electric Motor = 115/230 Volts = Single Phase = 1725 RPM = Pressure Gauge Shows 0 PSI = Includes Steel Press Blocks And Tooling Bar = Measures 40" x 66" = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#10 • Jet Vertical Bandsaw

= Model VBS-350 = Serial Number 352583 = Vertical Bandsaw = Integrated Blade Welder = Welder Voltage 110-115 V = Welder Capacity 1/8 To 5/8 Inch (3 To 16 Mm) = Grooved Cast Metal Work Table = Adjustable Blade Guide Assembly = Top Blade Tension Handwheel = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#11 • Jet Belt And Disc Sander

= Model J-4200A-2 = Stock Number 414552 = Serial Number 21110108 = 6" X 48" Belt = 12" Disc = 1-1/2 Horsepower Motor = Single Phase = 230 Volt = Includes Cabinet Stand = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#12 • Porter-Cable Air Compressor

= Model CPLKC7080V2 = Serial Number 0920282075 = 80 Gallon Capacity = 7 Peak Horsepower = 175 PSI Maximum Pressure = 240 Volts, 30 Amps, Single Phase = Includes Regulator And Filter Assembly = Includes Hose = Buyer Responsible For Disassembly = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#13 • Dayton Blast Cabinet With Dust Collector

= Maximum Pressure 120 PSI = Minimum Pressure 5 PSI = Arm Ports With Protective Gloves = Hopper Bottom With Slide Gate = Foot Pedal Control = SMC Pneumatic Regulator And Solenoid Valve = Includes Econo Dust Collector And Hose = Measures 43"W x 26" x 66"T = Buyer Responsible For Disassembly And Removal = Forklift Will Be Available On The Scheduled Pick-Up Day
Notes
 

#14 • Ridgid 10 In. Table Saw

= Model R4512 = 10 In. Blade Diameter = 3450 RPM = 120 / 240 V = Integrated Mobile Base Stand = Includes Rip Fence And Miter Gauge
Notes
 

#15 • Hitachi Compound Miter Saw

= Model C10FCH2 = Compound Miter Saw = Integrated Laser Guide = Cast Turntable Base With Angle Gauge = Includes Dust Collection Bag
Notes
 

#16 • DeWalt 14" Abrasive Chop Saw

= Model DW871 Type 1 = Serial Number 431255 = 120 V AC/DC = 15 Amps = 3800 RPM = 14 Inch Cutting Wheel Capacity = 1 Inch Arbor Size = Integrated Material Clamping Vise = Includes Abrasive Metal Cutting Wheel
Notes
 

#17 • Jepson Power Circular Saw

= Model SHDC8320 = Serial Number 21040041 = Voltage 110-120V = Frequency 50-60Hz = Power Rating 1700W = Speed 1700 RPM = Saw Blade Diameter 320mm = Maximum Cutting Depth 120mm = Includes Instruction Manual
Notes
 

#18 • Black & Decker Professional Chop Saw

= Black & Decker Professional Chop Saw = Integrated Material Vise Clamp With Hand Crank = Pivoting Cutting Head = Metal Blade Guard = Top Operating Handle With Trigger Switch = Secondary Side D-Handle
Notes
 

#19 • Dyna-Glo Forced Air Heater

= Model KFA50DGD = 50,000 BTU Rating = 5.0 Gallon Fuel Tank Capacity = 0.38 Gallon Per Hour Fuel Consumption = 120VAC 60Hz Power Requirement
Notes
 

#20 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Capacity 400 / 480 M3/H = Motor Output 11.0 / 13.2 KW = Speed 970 / 1165 RPM = Pressure Rating 0.5 / 10 Mbar = Pressure Gauge Shows 0.85 Bar = Includes Telemecanique Switch Box
Notes
 

#21 • Rietschle Thomas Vacuum Pump

= Model VC 400 = Certified Working Condition = Serial Number 03 600908520001 = Capacity 400/480 M³/h = Vacuum Range 0.5/10 Mbar = Power Rating 11.0/13.2 KW = Operating Speed 970/1165 RPM = Baldor Drive Motor = Pressure Gauge Shows 0 Bar = Includes Telemecanique Switch Box
Notes
 

#22 • Pioneer Refrigerant Air Dryer

= Model R 100A = Serial Number B9321253A = 1/2 Horsepower Compressor = 115 Volts = 1 Phase = 250 PSI Maximum Pressure = Low Side Design Pressure 150 PSI = High Side Design Pressure 450 PSI = R-22 Factory Charge = Refrigerant Suction Pressure Gauge Shows Approx. 50 PSI
Notes
 

#23 • Scaffolding Frames With Deck And Hardware

= Steel Scaffolding End Frames = Platform Deck = Cross Bracing Components = Perforated Steel Posts = Includes Pins And Casters = Nice Clean Set $$
Notes
 

#24 • Aluminum Diamond Plate Dock Plate

= Welded Aluminum Construction = Diamond Tread Plate Deck = Raised Side Curbs = Underside Locking Stop Plates = Corner Shackle Attachment Points = Includes Durabilt Polyester Lifting Straps = Measures 5' x 5'
Notes
 

#25 • Uline 3-Step Rolling Safety Ladder

= Brand: Uline = Three-Step Rolling Safety Ladder = 350 Lbs Maximum Load = Capacity One Person = Perforated Steel Slip-Resistant Steps = Top Safety Platform = Dual Tubular Handrails = Spring-Loaded Front Casters = Rubber Tipped Legs = Made In The U.S.A.
Notes
 

#26 • Cotterman Two-Step Industrial Platform

= Cotterman Two-Step Work Platform = Steel Frame Construction = Serrated Diamond Grip-Strut Safety Grate Steps = Bolted Frame Assembly = Threaded Adjustable Leveling Foot = Capacity 1 Person = Made In The U.S.A. = Measures 48" x 24" x 21"
Notes
 

#27 • Industrial Steel Platform Cart

= Industrial Platform Cart = Steel Channel Frame = Flat Platform Deck = Tubular Steel Handle = Center Upright Post = Undermount Caster Wheels = Measures 5' x 30"
Notes
 

#28 • Jepson Premium Super Dry Cutter And Bench

= Jepson Premium Super Dry Cutter Metal Saw = Screw Type Material Vise Clamp = Clear Chip Shield And Blade Guard = 14 Inch Blade Capacity = Includes Wooden Workbench With Shelf = Includes Lenox Circular Saw Blades = Includes CGW Abrasives Cutting Wheels = Includes Bar Clamp = Measures 75" x 24" x 34"T
Notes
 

#29 • Industrial Steel Top Workbench

= Industrial Steel Workbench = Steel Plate Tabletop = Welded Steel Frame = Lower Storage Shelf = Measures 6'W x 4' x 39"T
Notes
 

#30 • Industrial Steel Welding Work Table

= Heavy Steel Plate Tabletop = Pre-Drilled Mounting Holes Along Outer Edges = Welded Square-Tube Steel Frame = Lower Tubular Horizontal Stretchers = Measures 49" x 5' x 34"T
Notes
 

#31 • Rolling Tubular Metal Utility Cart

= Tubular Metal Frame = Carpeted Top Platform = Lower Slatted Shelf = Four Swivel Caster Wheels = Measures 36" x 18.5" x 30"T
Notes
 

#32 • Uline Two Shelf Utility Cart

= Brand: Uline = Two Deep Lipped Basin Shelves = Molded Push Handle With Storage Compartments = Four Upright Corner Support Legs = Four Caster Wheels = Measures 25" x 42" x 33"T
Notes
 

#33 • Aero-Motive Hose Reels

= Aero-Motive Econ-O-Mite Hose Reels = Two Units Included = Model D535 = Model D633 = Includes Air Hoses, Brass Couplers, And Valve
Notes
 

#34 • Wilton C1 Bullet Swivel Base Bench Vise

= Brand Wilton = Model C1 = 5.5" Jaw = Bullet Style Bench Vise = Swivel Base Mechanism = Integrated Anvil Surface = Includes Metal Soft Jaw Caps = Includes Mounting Bolts With Nuts And Washers
Notes
 

#35 • HTC Roller Support Stands

= Quantity: Two Roller Stands = Brand: HTC = Model: HSS-18 = Series: Wedge Lock Super Duty = Steel Conveyor Roller Top = Telescoping Height Adjustment Column = Manual Adjustment Crank Handle = Four Leg Steel Base With Leveling Feet
Notes
 

#36 • Roller Support Stands

= Brand HTC = Model HSS-18 = Super Duty Roller Support = Cylindrical Steel Roller = Telescoping Height Adjustment = Four Point Base With Leveling Feet = Includes Adjustable Roller Stand
Notes
 

#37 • Pallet Of Red Plastic Storage Crates

= Pallet Lot Of Red Molded Plastic Crates = Ribbed Wall Construction = Massive Collection = Do Your Homework $ = See Photos For Description
Notes
 

#38 • Plastic Parts Bins In Wooden Crates

= Plastic Parts And Storage Bins = Molded Construction With Ribbed Exterior = Nested Stacking Configuration = Includes Two Wooden Shipping Crates
Notes
 

#39 • Plastic Parts Bins In Wooden Crates

= Molded Plastic Parts Bins = Two Wooden Pallet Storage Crates = Multiple Bin Sizes = Includes Plastic Insert Containers = Includes Hardware Fasteners
Notes
 

#40 • Plastic Storage Bins

= Molded Plastic Parts Organizer Bins = Modular Plastic Containers With Dividers = Includes Telescoping Plastic Parts Storage Tubes = Two Plywood Pallet Crates = Integrated Pallet Skids = Metal Corner Reinforcement Brackets = Braided Rope Handles
Notes
 

#41 • Plastic Parts Storage Bins In Crate

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#42 • Plastic Parts Storage Bins

= Massive Supply Of Plastic Parts Storage Bins = Molded Plastic Construction = Open Hopper Front And Shelf Styles = Akro-Mils Brand Markings Present = Includes Slatted Wooden Pallet Crate
Notes
 

#43 • Uline Shelf Bin Dividers And Bins

= Model S-19944D = Uline Shelf Bin Dividers = Dimensions 11 Inch By 4 Inch = Includes Akro-Mils Plastic Storage Bins = Includes Wooden Crate
Notes
 

#44 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 26 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#45 • Industrial Steel Shelving

= Industrial Shelving Bays = Steel Construction = Adjustable Shelf Levels = 19 Total Shelves = Buyer Is Responsible For Disassembly And Removal = Shelves Are Bolted Together (Bring Tools)
Notes
 

#46 • Industrial Steel Shelving Unit

= Industrial Steel Shelving Unit = Two Slotted Upright Frames = Diagonal Cross Bracing = Three Shelf Tiers = Six Horizontal Steel Beams = Measures 151"W x 29"D x 8'
Notes
 

#47 • Industrial Shelving Unit

= Brand Uline = Five Shelf Tiers = Four Upright Posts = Measures 25" x 8' x 7'T
Notes
 

#48 • Industrial Steel Shelving Unit

= Steel Industrial Shelving Unit = Five Tier Storage Rack = Measures 6' x 2' x 6'
Notes
 

#49 • Uline 4-Tier Rolling Wire Shelving Cart

= Four-Tier Wire Shelving Unit = Tubular Corner Posts = Uline Swivel Caster Wheels = Measures 24" x 36" x 68"
Notes
 

#50 • Multi Compartment Metal Storage Cabinet

= Industrial Multi Compartment Cabinet = Sheet Metal Construction = Multiple Hinged Access Doors = Twist Latch Closures = Knockout Mounting Slots = See Photos For Condition (Has Some Damage) = Measures 31" x 21"x 7'
Notes
 

#51 • Kennedy Steel Shop Desk Cabinet

= Kennedy Brand = Steel Construction = Upper Tiered Organizer Shelf = Sloped Desktop Surface = Single Drawer With Lock = Lower Double Door Storage Cabinet = Center Turn Handle Latch = Four Square Support Legs = Measures 53"T x 29" x 35"
Notes
 

#52 • Industrial Steel Standing Shop Desk

= Sheet Steel Construction = Sloped Writing Surface = Upper Pigeonhole Organizer Riser = Single Slide-Out Storage Drawer = Lower Support Shelf = Four-Legged Steel Base = Measures 35"W x 29.5"D x 53"T
Notes
 

#53 • Industrial Pedestal Fans

= Quantity Of Three Industrial Pedestal Fans = Dayton Model 2LY94B Commercial Air Circulator = Dayton Fan Diameter 16" = Includes Round Pedestal Bases With Wheels = See Photos For Description/Condition
Notes
 

#54 • Dayton 16 In Pedestal Fans

= Dayton Light Commercial Air Circulator = Model 2LY94B = Quantity Of Two = 16 Inch Fan Diameter = Three Speed Settings = Adjustable Pedestal Pole With Wheeled Base
Notes
 

#55 • Dayton Commercial Fan

= Model 2LY97B = Commercial Air Circulator With Pedestal Base = 24" Fan Diameter = Three Blade Assembly
Notes
 

#56 • Dayton 30" Mobile Circulator Fan

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#57 • Dayton 30" Mobile Air Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#58 • Dayton 30 In Mobile Circulator

= Model 2MA12B = 30" Diameter = Three Speed Settings = Tubular Tilt Frame With Wheels
Notes
 

#59 • Dayton 30" Mobile Air Circulator

= Model 2MA12 = 30" Light Commercial Mobile Air Circulator = Three Speed Settings
Notes
 

#60 • FlowPro High Velocity Drum Fan

= FlowPro High Velocity Air Circulator = Model 10380 = Electrical 120V 60Hz 3.0A = Two Speed Settings High And Low = Mobile Base With Wheels
Notes
 

#61 • WorkSmart 30" Swivel Blower Fan

= Model FE-75DC1-1(A) = 30 Inch Diameter = Direct Drive Swivel Blower = 120 Volts At 60 Hz = 1/3 Horsepower Motor = Two Speed Settings
Notes
 

#62 • Simple Deluxe 18" Fans

= Model HIFANXWALLMOUNT18 = Quantity Of Three = 18 Inch Wall Mounted Fan = 115 VAC 60 HZ = 110 Watts = Thermally Protected = Pull Chain Switch = Adjustable Mounting Brackets
Notes
 

#63 • Sperian Pure Flow Eyewash Station

= Manufacturer Sperian Honeywell = Model Pure Flow 1000 = Includes Wall Mounting Bracket = Buyer Responsible For Removal (Bring Tools)
Notes
 

#64 • Sperian Pure Flow Eyewash Station

= Brand Sperian Honeywell = Model Fendall Pure Flow 1000 = Part Number 32-001050-0000 = Includes Cartridges And Wall Mount Bracket
Notes
 

#65 • Justrite 4 Drum Workstation

= Model H-4037 = Justrite 4 Drum Spill Containment Workstation Sump Capacity 49 Gallons = Load Capacity 6,000 Lbs = Made In USA = Includes Two Removable Grates
Notes
 

#66 • Commercial Trash Cans With Dollies

= Four Commercial Utility Containers = Heavy-Duty Plastic Construction = Molded Side Handles = Includes Four Wheeled Dolly Bases With Swivel Casters
Notes
 

#67 • Commercial Trash Cans With Dollies

= Four Molded Plastic Utility Containers = Integrated Side Handles = Reinforced Rims = Includes Four Wheeled Caster Dollies
Notes
 

#68 • Utility Trash Cans

= Commercial Plastic Utility Containers = 55 Gallon Capacity = 32 Gallon Capacity = Integrated Side Handles = Includes Wheeled Caster Dollies
Notes
 

#69 • Assorted Hand Tools

= Assorted Hand Tools= Razor-Back 7" Mortar Hoe = Includes Rubbermaid Commercial Products Caution Wet Floor Sign = Includes Square Point Shovel = Includes Brooms = Includes Stand-Up Metal Dustpan = Includes Floor Scrapers And Utility Handles = And More
Notes
 

#70 • Assorted Commercial Cleaning And Maintenance Tools

= Commercial Dust Mops = Push Brooms = Floor Squeegees = Plastic Snow Shovels With D-Grip Handles = Upright Lobby Dustpan = Metal Floor Scraper = Includes Additional Tool Handles
Notes
 

#71 • Mule Wheeled Pry Lever

= Tapered Wooden Lever Handle = Heavy Steel Nose Plate = Upturned Front Pry Lip = Dual Metal Roller Wheels = Underside Transverse Axle = Four Rivet Plate Fastening = Measures 7'L
Notes
 

#72 • Greenlee Conduit Bender

= Model 8843 = 1-1/4" EMT Conduit Capacity = 1" Rigid Conduit Capacity = Cast Metal Bender Head = Tubular Steel Handle = Includes Gardner Bender Conduit Bender With Handle
Notes
 

#73 • Dual Work Light Stands

= Brand Regent = Model Number TC51000 = Dual Halogen Fixtures = Telescoping Tripod Stand = One May Need Repaired/Bulbs
Notes
 

#74 • Rotary Drum Pump, Grease Gun And Hammer

= Rotary Drum Pump With Curved Discharge Spout = Threaded Suction Pipe Section = Manual Hand Crank = Includes Lever-Action Grease Gun With Flexible Extension Hose = Includes Ball-Peen Hammer With Wooden Handle
Notes
 

#75 • Tuthill Fuel Transfer Pumps

= Brand: Tuthill Corporation Fill-Rite Division = Series 100 = Model 112 = Compatible With Gasoline, Diesel Fuel, Fuel Oil, Lubricating Oil, And Kerosene = Includes Lever-Action Hand Pump = Includes Dispensing Hose And Suction Pipes
Notes
 

#76 • Hanging Packing Peanut Dispenser Hopper

= Heavy Fabric Hopper = Overhead Suspension Chains = Top Spreader Rods = Clear Ribbed Discharge Chute = Hose Clamp And Valve Assembly = Includes Packing Peanuts
Notes
 

#77 • Welded Steel Wheeled Dollies

= Welded Steel Frame Dollies = Two Units Included = Tubular Steel Construction = Four Swivel Caster Wheels Per Unit = Measures 24" x 24" And 24" x 16"
Notes
 

#78 • Assorted Pneumatic Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#79 • Assorted Air Hoses

= Pneumatic Air Hoses = Includes Quick-Connect Couplers And Plugs = See Photos For Description
Notes
 

#80 • Ratcheting Tie Down Straps

= Assorted Straps (Great Condition ) = Ratcheting Tie Down Straps = Dimensions Of 2 In. X 27 Ft. = Working Load Limit Of 3,300 Lb. And 3,333 Lb. = Breaking Strength Of 10,000 Lb.
Notes
 

#81 • Scotts Turf Builder Seeder

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#82 • Scotts EdgeGuard Mini Spreader

= Model: Turf Builder Edgeguard Mini = Walk-Behind Broadcast Spreader = Rotary Spreader Setting Dial 2 Through 15
Notes
 

#83 • Modular Desk Suite With Hutch And Peninsula

= Modular Executive Workstation System = Upper Storage Hutch With Cabinet Doors = Fabric Tackboard Panels = Rounded Peninsula Conference Table = Pedestal Support Base = Credenza Return Unit = Lateral File Drawers And Storage Drawers = Integrated Wire Management Channel = Includes Power Strip And Hanging File Folders = Measures 92" x 113" = Buyer Responsible For Disassembly And Removal
Notes
 

#84 • Vevor Ice Maker And Brio Water Dispenser

= Model ZBJ60KGSYPPSB0001V1 = Includes Brio CLPOU420UVF2 Water Purifier = Both Working Condition
Notes
 

#85 • Paper Shredders

= Royal Paper Shredder = Model MC14MX = Ativa Paper Shredder = Model A12CC19
Notes
 

#86 • Heat Storm Infrared Heater

= Heat Storm Outdoor Infrared Electric Heater = Model Number HS-1500-OTR-TRI = 1500 Watts Power Rating = 120 Volts 60 Hz = Date Of Manufacture 2024-06 = Includes Adjustable Metal Tripod Stand
Notes
 

#87 • Portable Electric Space Heaters

= Lasko Ceramic Tower Heaters = Lasko Digital Ceramic Heater = Lasko Compact Heater With Handle = Perfect Aire Radiant Wire Mesh Heater = Pelonis Radiant Honeycomb Mesh Heater = Geneva Utility Heater With Rotary Controls
Notes
 

#88 • Dry-Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes
 

#89 • Dry Erase Whiteboard

= Measures 48"T x 8'W = Dry-Erase Writing Surface = Aluminum Trim Frame = Rear Top Mounting Rail = Composite Core Construction
Notes

 

 

#90 • Dry Erase Boards

= Three Whiteboards = Aluminum Frames = Dry-Erase Surfaces = Includes Attached Marker Trays = Measures 48" x 48"
Notes