General Weldments Inc Day 2
Listing ID#: 910302

Sale Location
Irwin, PA 15642
Full Address Available on Tuesday, Nov 17
Sale Dates and Times
Wednesday Nov 18,
Sale Type
   Live with Online Auction  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandmachinery.com

EstateSale.com ID#: 10931
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made.
1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up.
2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion.
3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them.
4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given.
5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online.
6.$25 minimum bid on all lots.
7.No one under the age of 18 years of age is permitted to register or bid.
8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property.
9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid.
10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101.
11.Removal dates and times: After the auction until 5 pm, Thursday 11/19 to Wednesday 11/25, 9 am to 3 pm. By appointment only thru 12/3 Items not picked up by end of day December 3 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after December 3. Call or see auctioneer for details.
12.NSF or stop payment checks are subject to a $35.00 returned check fee.
Listing Information
CNCs, inspection equipment, tooling, stock & materials, carbide tooling, welders, acorn tables CNC- Okuma MA-400HA HMC, Fadal vmcs(some w/ 4th axis), Poreba tok 80n lathe, Poreba TPK 90 n for parts, Daewoo Puma 230S, Star SR20RII lathe w/ bar feed, Saws- DoAll vert, Kastotwin L4 automatic horz, PMI 610A auto upcat Manual machines � Ceruti 3� horz boring mill, K&T mill, L&S lathe, shop lathe Inspection tooling � intramiks, height gages, plug & ring gages, pin & block gages, calipers, indicators, mics & specialty mics, CMM table, sine bars,





704
INDEXABLE INSERT LATHE TOOLING
ISCAR CUTTING & GROOVING






















































758
THREAD MEASURING WIRES, WIGGLER SET,
COMBINATION SQUARE, 5" STANDARD GAUGE


















776
MISC GAGE PIN SETS, 7 PARTIALS, &
BOX OF NEW GAGE PINS, ASSORTED












788
MITUTOYO DIAL BORE GAGES,
1 FULL SET WITH STANDARDS, 1 PARTIAL








796
MITUTOYO GRANITE STEP BLOCKS "GRAPLATE"
.0001 ACCURACY, GRADE P, 6"X6", SN 4300,



799
STARRETT MASTER PRECISION LEVEL,
EACH MARK .0005 IN/ FT
















815
TOP OF SHELVES CONTENTS
READY TO SHIP & UP, MISC METALS, TAGS, MISC

816
BOTTOM OF SHELVES CABINETS
THREAD, RING GAGES & PLUG GAGES














830
COMPUTER, PRINTER
HP LASERJET 4050, DELL SCREEN, ASUS TOWER


832
FADAL VMC4020HT VERT MACHINING CENTER
FADAL CNC 88HS CONTROLS, MFG 1994, SN9411329 MODEL 906-1, 45"x20" TABLE, WITH 4TH AXIS, 21 ATC,




















852
FADAL VMC 4525
FADAL MULTIPROCESS CONTROL, MFG 2005, SN 012005118436



Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 17
Irwin, PA



Sponsored Links

General Weldments Inc Day 2

Hartland Auctioneers

Hartland Auctioneers


Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
Irwin, PA 15642
Full Address Available after 9 am
on Tuesday, Nov 17
Sale Dates and Times
Wednesday Nov 18,
Sale Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online. 6.$25 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: After the auction until 5 pm, Thursday 11/19 to Wednesday 11/25, 9 am to 3 pm. By appointment only thru 12/3 Items not picked up by end of day December 3 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after December 3. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
Listing Details
CNCs, inspection equipment, tooling, stock & materials, carbide tooling, welders, acorn tables CNC- Okuma MA-400HA HMC, Fadal vmcs(some w/ 4th axis), Poreba tok 80n lathe, Poreba TPK 90 n for parts, Daewoo Puma 230S, Star SR20RII lathe w/ bar feed, Saws- DoAll vert, Kastotwin L4 automatic horz, PMI 610A auto upcat Manual machines � Ceruti 3� horz boring mill, K&T mill, L&S lathe, shop lathe Inspection tooling � intramiks, height gages, plug & ring gages, pin & block gages, calipers, indicators, mics & specialty mics, CMM table, sine bars,





704
INDEXABLE INSERT LATHE TOOLING
ISCAR CUTTING & GROOVING






















































758
THREAD MEASURING WIRES, WIGGLER SET,
COMBINATION SQUARE, 5" STANDARD GAUGE


















776
MISC GAGE PIN SETS, 7 PARTIALS, &
BOX OF NEW GAGE PINS, ASSORTED












788
MITUTOYO DIAL BORE GAGES,
1 FULL SET WITH STANDARDS, 1 PARTIAL








796
MITUTOYO GRANITE STEP BLOCKS "GRAPLATE"
.0001 ACCURACY, GRADE P, 6"X6", SN 4300,



799
STARRETT MASTER PRECISION LEVEL,
EACH MARK .0005 IN/ FT
















815
TOP OF SHELVES CONTENTS
READY TO SHIP & UP, MISC METALS, TAGS, MISC

816
BOTTOM OF SHELVES CABINETS
THREAD, RING GAGES & PLUG GAGES














830
COMPUTER, PRINTER
HP LASERJET 4050, DELL SCREEN, ASUS TOWER


832
FADAL VMC4020HT VERT MACHINING CENTER
FADAL CNC 88HS CONTROLS, MFG 1994, SN9411329 MODEL 906-1, 45"x20" TABLE, WITH 4TH AXIS, 21 ATC,




















852
FADAL VMC 4525
FADAL MULTIPROCESS CONTROL, MFG 2005, SN 012005118436



Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
General Weldments Inc Day 2
 Live Auction w/Online Bidding
Sale Date(s)
Wednesday Nov 18,
Sale Location
Irwin, PA 15642
Full Address Available on Tuesday, Nov 17
Company
Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for by cash, WV, PA or Ohio co. checks, credit card or wire transfer. 4% surcharge for credit cards. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer, at the auctioneers discretion. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online. 6.$25 minimum bid on all lots. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: After the auction until 5 pm, Thursday 11/19 to Wednesday 11/25, 9 am to 3 pm. By appointment only thru 12/3 Items not picked up by end of day December 3 will be considered forfeit unless arrangements have been made with the auctioneer. Storage fees may start to be assessed at $150 per week after December 3. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee.
CNCs, inspection equipment, tooling, stock & materials, carbide tooling, welders, acorn tables CNC- Okuma MA-400HA HMC, Fadal vmcs(some w/ 4th axis), Poreba tok 80n lathe, Poreba TPK 90 n for parts, Daewoo Puma 230S, Star SR20RII lathe w/ bar feed, Saws- DoAll vert, Kastotwin L4 automatic horz, PMI 610A auto upcat Manual machines � Ceruti 3� horz boring mill, K&T mill, L&S lathe, shop lathe Inspection tooling � intramiks, height gages, plug & ring gages, pin & block gages, calipers, indicators, mics & specialty mics, CMM table, sine bars,

700

701

702

703

704
INDEXABLE INSERT LATHE TOOLING
ISCAR CUTTING & GROOVING

705

706

707

708

709

710

711

712

713

714

715

716

717

718

719

720

721

722

723

724

725

726

727

728

729

730

731

732

733

734

735

736

737

738

739

740

741

742

743

744

745

746

747

748

749

750

751

752

753

754

755

756

757

758
THREAD MEASURING WIRES, WIGGLER SET,
COMBINATION SQUARE, 5" STANDARD GAUGE

759

760

761

762

763

764

765

766

767

768

769

770

771

772

773

774

775

776
MISC GAGE PIN SETS, 7 PARTIALS, &
BOX OF NEW GAGE PINS, ASSORTED

777

778

779

780

781

782

783

784

785

786

787

788
MITUTOYO DIAL BORE GAGES,
1 FULL SET WITH STANDARDS, 1 PARTIAL

789

790

791

792

793

794

795

796
MITUTOYO GRANITE STEP BLOCKS "GRAPLATE"
.0001 ACCURACY, GRADE P, 6"X6", SN 4300,

797

798

799
STARRETT MASTER PRECISION LEVEL,
EACH MARK .0005 IN/ FT

800

801

802

803

804

805

806

807

808

809

810

811

812

813

814

815
TOP OF SHELVES CONTENTS
READY TO SHIP & UP, MISC METALS, TAGS, MISC

816
BOTTOM OF SHELVES CABINETS
THREAD, RING GAGES & PLUG GAGES

817

818

819

820

821

822

823

824

825

826

827

828

829

830
COMPUTER, PRINTER
HP LASERJET 4050, DELL SCREEN, ASUS TOWER

831

832
FADAL VMC4020HT VERT MACHINING CENTER
FADAL CNC 88HS CONTROLS, MFG 1994, SN9411329 MODEL 906-1, 45"x20" TABLE, WITH 4TH AXIS, 21 ATC,

833

834

835

836

837

838

839

840

841

842

843

844

845

846

847

848

849

850

851

852
FADAL VMC 4525
FADAL MULTIPROCESS CONTROL, MFG 2005, SN 012005118436

853

854