Xtremetalworks Metal Fabrication Business
Listing ID#: 912134

Sale Location
6440 North Avon Road
Honeoye Falls, NY 14472
Sale Dates and Times
Bidding Starts: Friday Nov 20
Bidding Ends: Tuesday Dec 1
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Reynolds Auction Company

Contact: David Koeberle
Phone: 315-597-8815
Email: dak@reynoldsauction.com
Website: www.reynoldsauction.com

EstateSale.com ID#: 10614
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and conditions of this Auction:
AUCTION TERMS & CONDITIONS
" Out-of-state buyers without an established HiBid history will not be permitted to bid.
" All bidders must register prior to placing any bids.
" Bids cannot be retracted or modified once the auction begins.
" All sales are final. All items are sold "AS IS", with no guarantees or warranties of any kind, including warranty of merchantability. By placing a bid, the purchaser accepts the item in its current "AS IS" condition.
" It is the bidder's responsibility to determine the condition of items prior to bidding. We strongly recommend inspecting lots before placing bids.
" All condition reports provided by Reynolds Auction Co. are subjective opinions. Reynolds Auction Co. is not responsible for errors in description, including but not limited to age, size, measurements, condition, rarity, importance, or provenance. Descriptions are provided for informational purposes only.
" A 15% Buyer's Premium will be added to all purchases.
" Credit cards are the only accepted form of payment for this auction. We accept Visa and MasterCard only.
" Purchases exceeding $2,000 for gold, sterling silver, jewelry, vehicles and equipment may require payment by certified funds or wire transfer unless prior arrangements are made. No other forms of payment will be accepted.
" Payment is due in full within the time limits posted for the auction. All payments will be processed using the credit card provided at registration.
" A 15% Buyer's Premium and NYS Sales Tax (for NYS buyers) will be added to all applicable purchases. Tax exemption information must be entered before the auction closes. No refunds will be issued for tax charged due to missing or late exemption documentation.
" By bidding in this auction, you enter into a binding contract and agree to these Terms and Conditions. Winning bidders accept full responsibility for completing their purchase. Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors, shall not be held liable for any losses, claims, liabilities, or judgments.
" Reynolds Auction Co. shall not be held liable for any expenses, fees, or other damages arising from the use of our services, website, auction property, or this site, including but not limited to property damage, personal injury, disputes between bidders, or any breach of these terms by a bidder.
" All successful bidders are required to sign their receipt at the time of pickup, acknowledging that all items have been received and are in satisfactory condition. There will be no returns, refunds, or exchanges. This is an auction sale and not a retail transaction.
" Reynolds Auction Co. is not responsible for any delays or interruptions in internet service, errors, or omissions caused by any means. We do not guarantee continual, uninterrupted, or error-free service or use of the website.
" Reynolds Auction Co. reserves the right to suspend bidding, withdraw or re-sell any item or lot, and/or void any sale at its sole discretion and for any reason.
" All sales are subject to applicable New York State sales tax for NYS buyers. A 15% Buyer's Premium will be added to the purchase price of every item.
" If you are tax exempt, you must indicate your exemption at the time of registration and provide a valid, current exemption certificate before the auction closes.
" If proper documentation is not received no later than 4:00 PM EST on the day the auction closes sales tax will be charged. Once the auction concludes and credit cards have been processed, sales tax will not be removed or refunded.
" Bids cannot be retracted or modified once the auction begins.
" All items must be picked up within the scheduled pickup timeframe. Please carefully review the posted pickup dates and times. If you are unable to attend, you must arrange for someone to pick up your items on your behalf. Please Note: Shipping is available on certain items, please see shipping policy. No alternative pickup times will be offered.
" If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued.
" If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued.
" Reynolds Auction Co. is not liable for any damage to property left on the auction premises after the auction and designated pickup timeframe has concluded. We are also not responsible for damage to items during transport or storage after the auction day and scheduled pickup period. No refunds will be issued for items damaged after these timeframes have ended.
" There are no refunds or returns on any items sold in this auction.
Listing Information
Selling remaining contents of Tom Batz owner of Xtremetalworks a custom fabrication of outdoor art. Welding equipment, tools, metal stock, John Deere mower, and scrap metal. Strict pick up day and time, please do not bid if you can not pick up your purchases. Skidsteer on site for loading large equipment. Please bring help. You can find the auction at https://reynoldsauctioncompany.hibid.com Starts: November 20th, 2026 Ends: Tuesday December 1st, 2026 @7PM Soft close/extended bidding. Local pick up, Thursday December 3rd, 10-4 pm @ 6440 North Avon Road, Honeoye Falls NY 14472 RESALE TAX BUYERS - NEW YORK STATE RESIDENTS New York State law requires us to collect sales tax unless we have a valid resale or exemption certificate on file. All required exemption documentation must be submitted no later than 4:00 PM EST on the day the auction closes. If the proper forms are not received by that time, sales tax will be charged. Please note: Once sales tax has been charged, it will NOT be refunded. To avoid delays or additional charges, we strongly encourage you to submit your exemption documentation as early as possible. Thank you for your prompt attention to this matter.





5
CENTRAL MACHINERY BANDSAW
Central Machinery bandsaw, model T-591/9912, serial 36086

6
OXY-ACETYLENE TORCH & CART, HOSES, & REGULATORS
Includes gauges, hoses, torch handle, helmets, regulators, and wheeled cart. Overall torch handle length approximately 16 inches.

7
CENTRAL HYDRAULICS 12 TON PIPE BENDER
Central Hydraulics pipe bender with 12 ton hydraulic jack and five bending dies: 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in.

8
CRAFTSMAN 10-IN BENCHTOP DRILL PRESS WITH STAND
Craftsman Model 137.219100, 120V, 1/2 HP, 5 speeds. Table 16x13x30"height, 1/2" chuck. Very heavy! Bring help to load!

9
1 TON MOBILE GANTRY CRANE & CHAIN HOIST
Heavy-duty 6" ibeam channel gantry crane, 1 ton capacity, Pittsburgh chain hoist, approx. 7 ft beam, 32 in base width, rolling casters. Top ibeam needs to be removed to exit building. Very heavy! Come prepared with tools and help.

10
HEAVY DUTY INDUSTRIAL SCROLL BENDER
Large industrial scroll bender with assorted dies and electric motor. Manual control lever. 3-phase power plug attached. Very heavy! Skidsteer on site for loading.

11
CINCINNATI BENCH GRINDER 2HP 208V
Cincinnati Electrical Tool Co. bench grinder, 2 HP, 208V, with grinding and wire wheels on pedestal. Industrial-grade unit. Very heavy! Bring help to load!

12
BERG MFG CORP PUNCH PRESS SERIAL D1798
Berg Manufacturing Corp punch press, serial D1798, New Cumberland, PA. Visible wear and frayed power cord. Operating condition unknown. Very heavy! Bring help to load!

13
MOBILE STEEL WELDING TABLE
Steel welding table with casters, 24x24 inch top, 30 inches tall. Includes a 52-inch extension arm with welded arm attachment.

14
CENTRAL TRACTOR 5HP 230V AIR COMPRESSOR
Central Tractor Farm & Family Center air compressor, 5 HP, 230V, with attached hose. Serial BE3-24.

15
AIR HOSES WITH FITTINGS
Five air hoses in various lengths and colors, mixed condition

16
HEAT SURGE ELECTRIC FIREPLACE
Heat Surge electric fireplace, model ADL-2000M-X

17
ROLLING MACHINE WITH IRONMAN MOTOR
Steel rolling machine, IronMan by Ohio Gear 0.59 HP motor, with control pedal and wiring. Includes frame on wheels. Includes two additional electric motors (working condition unknown)

18
MILWAUKEE PNEUMATIC TIRE HAND CART
Milwaukee hand cart with pneumatic tires and adjustable length handle.

19
AIRCO 250 AC/DC HELIWELDER V ARC WELDER SETUP
Includes AIRCO Heliwelder V, control panel, foot pedal, cables with exposed wires, and BINZEL WK43 coolant recirculator. 220 volt. operating condition unknown, Very heavy! Bring help to load!

20
CRAFTSMAN 10" RADIAL ARM SAW W/STAND
Craftsman 10 inch radial arm saw with stand. Operates.

21
NINE HAND-OPERATED GREASE GUNS AND FUNNELS
Manual grease guns, oil funnels, and a metal bin. Includes approx. 9 grease guns, various styles and conditions.

22
METAL 32 BIN STORAGE UNIT, LARGE QTY OF HARDWARE.
Steel rolling bin with yellow storage bins. Contains large supply of assorted fasteners, washers, nuts, bolts, wheels, discs, and hardware parts.

23
BENCH GRINDER LOT W/ WORK TABLE 42X27X37 IN
Includes Speedway Series 3/4 HP 8 in grinder, Delta 6 in bench grinder, and a heavy metal table on casters.

24
METAL INDUSTRIAL MOBILE WORK TABLE
Metal mobile work table with four wheels. Includes a lower shelf.

25
JET HORIZONTAL/VERTICAL BANDSAW & COOLANT SYSTEM
JET model HVBS-7MW bandsaw with coolant system and roller stands. Includes rollers and 80-inch conveyor. For metal cutting applications. Very heavy! Bring help to load!

26
THREE 3/4" PIPE CLAMPS
Three 3/4" pipe clamps with cast iron heads

27
HEAVY DUTY MANUAL METAL BENDER
Steel manual bender with dual base plates, fixed bolts, heavy welded construction, and approx. 34 in. working height. Buyer unbolts from floor.

28
TWO HAND PALLET JACKS IN NEED OF REPAIR
Two hydraulic pallet jacks with 2000 kg capacity each. Both in need of repair. One will not hold in lifted position. Other is missing a wheel.

29
RUBBERMAID MOP BUCKET, MOP AND WET FLOOR SIGN
Rubbermaid mop bucket, wringer, wet floor sign, and mop

30
HARDWARE BINS WITH FASTENERS AND PARTS
Bins of nuts, bolts, washers, machine screws, cotter pins, grinding wheels, and related hardware. Various sizes and types, all in plastic storage bins. Mounted to wall, buyer removes

31
STEEL SHEET STOCK IN VARIOUS SIZES
Steel sheet stock, some with oxidation. Largest sheets approx. 58x36 inches. Approx. 20 pieces as shown. Rack included. Very heavy! Bring help to load!

32
STEEL AND METAL STOCK RACK WITH SQUARE TUBING
Steel rack and various lengths of square and round metal tubing. Mixed metals, some with surface rust. Sold as one lot. Very heavy! Bring help to load!

33
METAL STOCK ROUND, SQUARE, ANGLES FLAT WITH RACK
Metal stock including round tubes, square tubes, angles, hinges, and flat bars in various sizes and materials. Includes homemade metal stock approx. 90"x72"H Very heavy! Bring help to load!

34
STEEL ANGLE IRON STOCK RACK
Heavy-duty welded steel rack, approx. 65"H x 60"W x 3"D. Five shelves for storage or material handling. Very heavy! Bring help to load!

35
ASSORTED SHEET METAL GOODS WITH MOBILE RACK
Includes multiple aluminum and steel sheets, round discs, mesh, and expanded metal, plus mobile steel storage rack. Largest sheet approx. 40x63 in. Very heavy! Bring help to load!

36
HOMEMADE METAL RACK WITH METAL STOCK
Steel rectangular, square, and round, stock flat bar, and angle iron. Aluminum, solid bar and assorted tubular material. Stock rack approx. 13ft by 77" H Very heavy. Bring help to load!

37
6 METAL SNOWMAN SILHOUETTES
6 steel snowman figures, each about 37 inches tall and 18 inches wide. Each has cutouts for eyes and buttons. some surface rust

38
ASSORTED ORNATE IRON PIECES
Approx forty 45 inch twisted iron baluster pieces with decorative scrollwork. Suitable for railings or gates. Barrel included. Very heavy! Bring help to load!

39
9 DRAWER MOBILE METAL TOOL CABINET
Metal file cabinet with 9 drawers, mounted on casters.

40
CAPSA COMPOSITE MEDICAL 5-DRAWER CART
Capsa Medical cart with keypad lock, five drawers, interior dividers, and casters for mobility. Missing key. Composite.

41
MILLER HF-251D-1 HIGH FREQUENCY ARC STARTER
Miller HF-251D-1, high frequency arc starter, 115VAC, 1.5A, 90W, serial no. KC221731, with attached cables and plug. Operating condition unknown.


43
TWO 2-TON HYDRAULIC FLOOR JACKS
Two 2-ton hydraulic floor jacks

44
PAIR KAR-RITE MODEL 1083 STEEL CAR RAMPS
Two Kar-Rite Model 1083 steel ramps support up to 6500 lbs.

45
METAL SHEET ROLLER AND SPECIALTY TOOL
Hand-crank sheet roller and specialty tool.

46
COMPOSITE AND METAL STORAGE HARDWARE BINS
Various sizes of composite and metal storage bins and boxes. Stackable.

46
TROJAN UVMAX D4 UNIT & MINI-FLORALUX LIGHT
Includes Trojan UVMax D4 water disinfection unit, control box, power supply, High Yield Mini-Floralux 150W HPS light, and accessories.

47
CRAFTSMAN 16" 36CC CHAINSAW WITH CASE
Craftsman chainsaw, 16 inch bar, 36cc engine. Includes carrying case. Pulls over!

48
BASSICK 4" SWIVEL CASTERS POLYURETHANE SET OF 5
Five Bassick 4" swivel casters with polyurethane wheels and grease fittings.

49
ASSORTED SOCKETS AND RATCHETS
Sockets, ratchets, and extensions, Craftsman 4-piece adapter set. Brands include S-K, Seccon, Snap-on and more.

50
6 ASSORTED HAMMERS
Six hammers including ball peen, rubber mallet, sledge, and claw hammer. Various makers and handle types.

51
LG QTY ASSORTED SCREWDRIVERS
Screwdrivers, various brands and handle types, mixed conditions. Includes both flathead and Phillips tips.

52
8 LOCKING PLIERS INCLUDING CRAFTSMAN & VISE-GRIP
8 locking pliers including Craftsman and Vise-Grip. Various sizes and jaw styles.

53
NUTDRIVERS, FILES, CHISELS & PUNCHES
Various screwdrivers, metal files, punches, chisels, and scrapers. Mix of assorted brands and materials.

54
6 ASSORTED HAMMERS
Six various hammers include ball peen, claw, and dead blow types with wood and rubber handles.

55
13 ADJUSTABLE WRENCHES
13 adjustable wrenches including Sears 30871, Crescent, Allen, Husky, and others.

56
ASSORTED PLIERS, SNIPS & STRIPPERS
Pliers, wire strippers, scissors, snips, various brands

57
NINE VISE-GRIP STYLE WELDING CLAMPS
Includes Irwin Vise-Grip and C-Hanson C-12C clamps. Various sizes

58
NAPA EVERCRAFT SANDER & CENTRAL PNEUMATIC CHISEL
Includes a NAPA Evercraft 6-inch air sander, Central Pneumatic air chisel attachments

59
PNEUMATIC AIR IMPACT & DIE GRINDERS
Includes Central Pneumatic air impact wrench, Campbell Hausfeld cut-off tool, and an air angle die grinder.

60
8 MIXED SIZE STEEL C CLAMPS
Includes 8 steel C clamps, various sizes, Largest clamp measures about 12 inches.

61
FULTON 2000 LB TRAILER JACK & WINCH LOT
Includes Fulton 2000 lb trailer jack, 2000 lb hand winch with cable, Class II hitches, and trailer hardware.

62
LG QTY INDUSTRIAL FASTENERS & HARWARE
Various metal fasteners in plastic bags. Items include screws, eye bolts, washers, and specialty hardware. quantities vary.

63
METAL CRAFT AND WEATHER VANE LOT
Large quantity mtal weather vane parts, figures, letters, and decorative cutouts, scrap pieces.

64
METAL ORNAMENTAL HARDWARE LOT
Metal leaves, finials, rosettes, and bases. Various unfinished decorative hardware pieces, some with minor rust.

65
CRAFTSMAN DIGITAL LEVEL, HAND SAWS AND MORE
CRAFTSMAN digital level, two box levels, a hand saw, and a hacksaw with wooden handles.

66
DIE WRENCHES WITH DIES AND METAL STORAGE BIN
Multiple die wrenches with round dies

67
ASSORTED SCREWDRIVERS AND IMPACT DRIVER
Screwdrivers with various handle types and brands, including Craftsman and Stanley, plus an impact driver set in case.

68
4 VARIOUS PNEUMATIC SANDERS
Includes pneumatic belt sander and three orbital sanders.

69
CENTRAL PNEUMATIC FRAMING & HITACHI BRAD NAILERS
Central Pneumatic 3-in-1 framing nailer. Hitachi NT50AE2 18GA 2" brad nailer in case

70
LARGE ASSORTED HAND DRILLS AND DRILL BITS
Includes two hand braces, assorted drill bits, auger bits, wood box, jar, and rotary burrs.

71
VINTAGE KWIK-TWIST 6D C-CLAMPS AND OTHERS
Kwik-Twist 6D clamps, One with bent handle.

72
6 ASSORTED HAMMERS
Ball Peen, claw and lead

73
MISC WELDING AND AIR TOOL ACCESSORIES LOT
Welding torch tips, air blow guns, regulator, Pittsburgh welding guide, slag hammer, and assorted fittings.

74
ASSORTED PLIERS, CUTTERS & SHEARS
Hand tools including pliers, wire cutters, snips, tin shears, and assorted grips. Various handle types and conditions.

75
ASSORTED ALLEN WRENCHES
Bulk lot of assorted Allen wrenches, various brands and conditions.

76
ASSORTED WRENCHES, SOCKETS & TORQUE WRENCH
Various open-end, box, and specialty wrenches, sockets, adapters, and a torque wrench. Assorted brands and sizes.

77
LARGE LOT OF SAW BLADES, GRINDING & SANDING DISCS
Includes Oldham carbide saw blade, 14" metal cutting disc, variety of sanding, grinding, and wire wheels, both loose and packaged, various grits.

78
VARIETY OF EXTENSION CORDS, STRAPS, & BUNGIES
Extension cords, power strips, work lamps, cargo straps, bungee cords

79
TARPS, TOTE, & CRATE
Various sizes and conditions

80
HARDWARE & ELECTRICAL & PLUMBING LOT
Timermatic controls, wire nuts, vintage glass doorknobs, PVC fittings, multimeter, PDA, and connectors.

81
SIX ASSORTED PIPE WRENCHES
Six heavy-duty pipe wrenches, includes RIDGID, HUSKY brands and others, various sizes.

82
ASSORTED HANDTOOLS
Pittsburgh 13-piece socket set, combination wrenches, hand saws, pliers, pipe cutter, and snips. Mixed brands.

83
5 POWER TOOLS INCLUDING BOSCH, SEARS, BLACK+DECKER
Includes Bosch angle grinder, Sears Craftsman reciprocating saw, Black+Decker jig saw, Black+Decker finishing sander and drill.

84
POWER TOOL LOT: SANDER, SAWS, DRILLS & BELTS
Black & Decker BR400 belt sander, DeWalt DW304P reciprocating saw, Milwaukee heat gun, Black & Decker 3/8" drill, Craftsman 3/8" drill, and Norton sandpaper belts.

85
RIDGID 4.5" ANGLE GRINDER W/DISKS AND BAG
RIDGID R1001 4.5-inch angle grinder with 8.0A motor, carrying case, extra grinding discs

86
POWER TOOL LOT: SKILSAW, MAKITA, BLACK & DECKER
Includes Skilsaw 2.5 HP 15A circular saw with Laser CutLine, Makita HP1501 drill, Black & Decker 5" portable grinder, and Torchmate cutting torch control unit.

87
WELDING WIRE WITH 2 PARTIAL SPOOLS, ONE UNOPENED
Avesta type E309LTO-1, 0.045" dia, 25 lbs, and L-TEC FC719, 1/16" dia, 35 lbs.

88
THERMADYNE ARCAIR ELECTRODES
Arcair copperclad pointed electrodes, 1/4" x 12" (cat. no. 24-056-003), and Clemco Aerolyte cabinet window cover lens kit.

89
THREE TECHALLOY RACO 316L-16 3/16 ELECTRODE ROD
Three unopened tubes of Techalloy Raco 316L-16 stainless steel welding electrodes, 3/16 diameter, plus one box Forney 6011 welding rod, 1/8 in

90
BLACK PLASTIC SWIVEL CASTER WHEELS
Approximately 50 black plastic swivel caster wheels.

91
BLACK PLASTIC SWIVEL CASTERS
Approximately 50 black plastic swivel casters.

92
POWERWINCH 12 VOLT ELECTRIC WINCH MODEL 315
Includes Powerwinch Model 315, mounting plate, hardware, and wiring kit. 12 volt electric.

93
RANDOM TOOL GROUP
Includes Ryobi 18.0V Tuff Sucker vacuum, Ryobi 18.0V circular saw, (no batteries)two MVP Pro-Lift 6-ton jack stands, shrink wrap, lug wrench, and SKIL tool bag.

94
LINCOLN K497-1 MAGNUM 200 GUN & CABLE ASSEMBLY
Lincoln Electric K497-1 Magnum 200, 200A gun, 15 ft (4.5m) cable, for 0.035-0.045 in (0.9-1.2mm) wire, includes accessories. Appears used

95
HAMMERS, PLIERR, AND RIVET MULTI-TOOL LOT
4 hammers, 1 rubber mallet, 1 vise-grip plier, 2 rivet tools, and Arrow assorted rivets pack.

96
MACHINIST TOOLS, WELDING MAGNET, LEVELS, ETC
Hand tools includes squares, levels, micrometers, tap handle, sockets, bracket, installation tool, sanding sleeves, and a scientific calculator.

97
MIXED HAND TOOL LOT WITH SOCKETS, CLAMPS & TESTER
Socket sets, clamps, hacksaw, voltage tester, pliers, hole saw kit, files, chain, metal bin.

98
SIX CASTERS, VISE & MITYVAC BLEED KIT
Four Colson 4x1-1/4" casters, Littlestown bench vise, Mityvac MV8000 test & bleed kit, and two metal casters.

99
MIXED HAND TOOLS AND HARDWARE LOT
Storehouse cotter pin assortment, magnetic parts tray, Linemaster Clipper foot switch, hooks, bits, screws, wire brush, and other assorted hand tools and hardware.

100
HARDWARE FASTENERS AND CONNECTORS LOT
Lot includes large quantity of screws, nuts, washers, clips, and connectors. Multiple bags and a box with bulk quantities.

101
BULK LOT ASSORTED METAL SCREWS AND NUTS IN BAGS
Large assorted lot of metal screws and nuts in sealed plastic bags. Includes various sizes and types.

102
METAL HARDWARE LOCKS, PARTS & FASTENERS
Large lot including many cam locks, rivets, bushings, fasteners, small metal hardware.

103
HARDWARE FASTENERS & LIMITED TOOLS
Square D 70A breaker panels, assorted bolts, screws, nuts, hinges, hand tools, containers, and hardware parts.

104
ASSORTED HAND TOOLS & TILE SAW
Craftsman toolbox with contents, QEP No. 22500 tile saw, Milwaukee tool, Husky spray gun, Unipunch, hand saws, and accessories.

105
PRIMITIVE METAL ANTIQUE ITEMS
Dutch oven marked 12 in, metal milk or water pail, green ammo box, cast iron kettle, and hand sythe with wood handle. Chip in Dutch oven lid

106
SQUARE POINT SHOVEL AND METAL PRY BAR
Square point shovel with a wooden handle and a long metal pry bar.

107
ASSORTED STEEL SHEETS AND HEAVY METAL CHAINS
Five steel plates, and a bucket of heavy metal chains.

108
METAL SHELF W/ HARDWARE & ASSORTED ITEMS
Metal shelving unit with assorted hardware, door slides, cans of paint thinner, mineral spirits, screws, glass lamp shades, loose tools, scrap metal and accessories.

109
STEEL METAL SCRAP AND STOCK LOT
Steel scrap and stock, includes pipes, tubes, bars, angle and flat stock in various shapes, conditions and materials

110
LARGE SCRAP METAL AND HARDWARE LOT WITH SHELF UNIT
Scrap steel, car fenders, batteries, framing nails, rods, metal hardware, ornate metal pieces and storage bins.

111
HOMEMADE STEEL STAND AND CUT STEEL PLATES
Homemade heavy-duty steel specialty tool with adjustable height. Includes multiple large, cut steel plate segments for fabrication.

112
SHOP SHELVING WITH CONTENTS OFHARDWARE AND TOOLS
Metal shelving unit loaded with screws, fasteners, chains, bearings, funnels, hardware accessories, empty tool cases, and organizers.

113
THREE 5-FT PIPE SHELF PIECES
Three 5-ft pipe shelf brackets with adjustable green cast jaws, used for heavy duty shelving units

114
INDUSTRIAL STEEL SHELVING & CONTENTS
Steel shelves 66"W x 19"D x 45"H, assorted plastic and metal components, including washers, spacers, hangers, and hardware. 3 very heavy steel pieces (see photos)

115
STEEL SCRAP AND METAL STOCK
Large quantity includes steel flat bar, round tube, rods, patterned and decorative scrap, plates and box tubing. Many heavy pieces! Various sizes and shapes.

116
TROY-BILT SUPER BRONCO TILLER
Troy-Bilt Super Bronco CRT garden tiller with 6.0 HP Briggs & Stratton engine, Pulls over. Operating condition unknown.

117
HUSQVARNA AWD LAWNMOWER
Husqvarna HU725AWD lawnmower, 22 inch, 190cc engine Briggs & Stratton engine, AWD, Pulls over. Operating condition unknown.

118
JOHN DEERE D170 LAWN TRACTOR
John Deere D170 lawn tractor with 25HP engine, 54-inch Edge Cutting System, and 448.4 hours on meter. Model GXD170EJGG8707049. Turns over. Did not start.

119
2 TON MOBILE SHOP CRANE ENGINE HOIST
Folding shop crane, 2 ton max capacity, mobile with caster wheels, adjustable lift arm from 0.5 to 2 tons.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Xtremetalworks Metal Fabrication Business

Reynolds Auction Company

Reynolds Auction Company


Contact: David Koeberle
Phone: 315-597-8815
Sale Location
6440 North Avon Road
Honeoye Falls, NY 14472
Sale Dates and Times
Sale Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and conditions of this Auction: AUCTION TERMS & CONDITIONS " Out-of-state buyers without an established HiBid history will not be permitted to bid. " All bidders must register prior to placing any bids. " Bids cannot be retracted or modified once the auction begins. " All sales are final. All items are sold "AS IS", with no guarantees or warranties of any kind, including warranty of merchantability. By placing a bid, the purchaser accepts the item in its current "AS IS" condition. " It is the bidder's responsibility to determine the condition of items prior to bidding. We strongly recommend inspecting lots before placing bids. " All condition reports provided by Reynolds Auction Co. are subjective opinions. Reynolds Auction Co. is not responsible for errors in description, including but not limited to age, size, measurements, condition, rarity, importance, or provenance. Descriptions are provided for informational purposes only. " A 15% Buyer's Premium will be added to all purchases. " Credit cards are the only accepted form of payment for this auction. We accept Visa and MasterCard only. " Purchases exceeding $2,000 for gold, sterling silver, jewelry, vehicles and equipment may require payment by certified funds or wire transfer unless prior arrangements are made. No other forms of payment will be accepted. " Payment is due in full within the time limits posted for the auction. All payments will be processed using the credit card provided at registration. " A 15% Buyer's Premium and NYS Sales Tax (for NYS buyers) will be added to all applicable purchases. Tax exemption information must be entered before the auction closes. No refunds will be issued for tax charged due to missing or late exemption documentation. " By bidding in this auction, you enter into a binding contract and agree to these Terms and Conditions. Winning bidders accept full responsibility for completing their purchase. Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors, shall not be held liable for any losses, claims, liabilities, or judgments. " Reynolds Auction Co. shall not be held liable for any expenses, fees, or other damages arising from the use of our services, website, auction property, or this site, including but not limited to property damage, personal injury, disputes between bidders, or any breach of these terms by a bidder. " All successful bidders are required to sign their receipt at the time of pickup, acknowledging that all items have been received and are in satisfactory condition. There will be no returns, refunds, or exchanges. This is an auction sale and not a retail transaction. " Reynolds Auction Co. is not responsible for any delays or interruptions in internet service, errors, or omissions caused by any means. We do not guarantee continual, uninterrupted, or error-free service or use of the website. " Reynolds Auction Co. reserves the right to suspend bidding, withdraw or re-sell any item or lot, and/or void any sale at its sole discretion and for any reason. " All sales are subject to applicable New York State sales tax for NYS buyers. A 15% Buyer's Premium will be added to the purchase price of every item. " If you are tax exempt, you must indicate your exemption at the time of registration and provide a valid, current exemption certificate before the auction closes. " If proper documentation is not received no later than 4:00 PM EST on the day the auction closes sales tax will be charged. Once the auction concludes and credit cards have been processed, sales tax will not be removed or refunded. " Bids cannot be retracted or modified once the auction begins. " All items must be picked up within the scheduled pickup timeframe. Please carefully review the posted pickup dates and times. If you are unable to attend, you must arrange for someone to pick up your items on your behalf. Please Note: Shipping is available on certain items, please see shipping policy. No alternative pickup times will be offered. " If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued. " If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued. " Reynolds Auction Co. is not liable for any damage to property left on the auction premises after the auction and designated pickup timeframe has concluded. We are also not responsible for damage to items during transport or storage after the auction day and scheduled pickup period. No refunds will be issued for items damaged after these timeframes have ended. " There are no refunds or returns on any items sold in this auction.
Listing Details
Selling remaining contents of Tom Batz owner of Xtremetalworks a custom fabrication of outdoor art. Welding equipment, tools, metal stock, John Deere mower, and scrap metal. Strict pick up day and time, please do not bid if you can not pick up your purchases. Skidsteer on site for loading large equipment. Please bring help. You can find the auction at https://reynoldsauctioncompany.hibid.com Starts: November 20th, 2026 Ends: Tuesday December 1st, 2026 @7PM Soft close/extended bidding. Local pick up, Thursday December 3rd, 10-4 pm @ 6440 North Avon Road, Honeoye Falls NY 14472 RESALE TAX BUYERS - NEW YORK STATE RESIDENTS New York State law requires us to collect sales tax unless we have a valid resale or exemption certificate on file. All required exemption documentation must be submitted no later than 4:00 PM EST on the day the auction closes. If the proper forms are not received by that time, sales tax will be charged. Please note: Once sales tax has been charged, it will NOT be refunded. To avoid delays or additional charges, we strongly encourage you to submit your exemption documentation as early as possible. Thank you for your prompt attention to this matter.





5
CENTRAL MACHINERY BANDSAW
Central Machinery bandsaw, model T-591/9912, serial 36086

6
OXY-ACETYLENE TORCH & CART, HOSES, & REGULATORS
Includes gauges, hoses, torch handle, helmets, regulators, and wheeled cart. Overall torch handle length approximately 16 inches.

7
CENTRAL HYDRAULICS 12 TON PIPE BENDER
Central Hydraulics pipe bender with 12 ton hydraulic jack and five bending dies: 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in.

8
CRAFTSMAN 10-IN BENCHTOP DRILL PRESS WITH STAND
Craftsman Model 137.219100, 120V, 1/2 HP, 5 speeds. Table 16x13x30"height, 1/2" chuck. Very heavy! Bring help to load!

9
1 TON MOBILE GANTRY CRANE & CHAIN HOIST
Heavy-duty 6" ibeam channel gantry crane, 1 ton capacity, Pittsburgh chain hoist, approx. 7 ft beam, 32 in base width, rolling casters. Top ibeam needs to be removed to exit building. Very heavy! Come prepared with tools and help.

10
HEAVY DUTY INDUSTRIAL SCROLL BENDER
Large industrial scroll bender with assorted dies and electric motor. Manual control lever. 3-phase power plug attached. Very heavy! Skidsteer on site for loading.

11
CINCINNATI BENCH GRINDER 2HP 208V
Cincinnati Electrical Tool Co. bench grinder, 2 HP, 208V, with grinding and wire wheels on pedestal. Industrial-grade unit. Very heavy! Bring help to load!

12
BERG MFG CORP PUNCH PRESS SERIAL D1798
Berg Manufacturing Corp punch press, serial D1798, New Cumberland, PA. Visible wear and frayed power cord. Operating condition unknown. Very heavy! Bring help to load!

13
MOBILE STEEL WELDING TABLE
Steel welding table with casters, 24x24 inch top, 30 inches tall. Includes a 52-inch extension arm with welded arm attachment.

14
CENTRAL TRACTOR 5HP 230V AIR COMPRESSOR
Central Tractor Farm & Family Center air compressor, 5 HP, 230V, with attached hose. Serial BE3-24.

15
AIR HOSES WITH FITTINGS
Five air hoses in various lengths and colors, mixed condition

16
HEAT SURGE ELECTRIC FIREPLACE
Heat Surge electric fireplace, model ADL-2000M-X

17
ROLLING MACHINE WITH IRONMAN MOTOR
Steel rolling machine, IronMan by Ohio Gear 0.59 HP motor, with control pedal and wiring. Includes frame on wheels. Includes two additional electric motors (working condition unknown)

18
MILWAUKEE PNEUMATIC TIRE HAND CART
Milwaukee hand cart with pneumatic tires and adjustable length handle.

19
AIRCO 250 AC/DC HELIWELDER V ARC WELDER SETUP
Includes AIRCO Heliwelder V, control panel, foot pedal, cables with exposed wires, and BINZEL WK43 coolant recirculator. 220 volt. operating condition unknown, Very heavy! Bring help to load!

20
CRAFTSMAN 10" RADIAL ARM SAW W/STAND
Craftsman 10 inch radial arm saw with stand. Operates.

21
NINE HAND-OPERATED GREASE GUNS AND FUNNELS
Manual grease guns, oil funnels, and a metal bin. Includes approx. 9 grease guns, various styles and conditions.

22
METAL 32 BIN STORAGE UNIT, LARGE QTY OF HARDWARE.
Steel rolling bin with yellow storage bins. Contains large supply of assorted fasteners, washers, nuts, bolts, wheels, discs, and hardware parts.

23
BENCH GRINDER LOT W/ WORK TABLE 42X27X37 IN
Includes Speedway Series 3/4 HP 8 in grinder, Delta 6 in bench grinder, and a heavy metal table on casters.

24
METAL INDUSTRIAL MOBILE WORK TABLE
Metal mobile work table with four wheels. Includes a lower shelf.

25
JET HORIZONTAL/VERTICAL BANDSAW & COOLANT SYSTEM
JET model HVBS-7MW bandsaw with coolant system and roller stands. Includes rollers and 80-inch conveyor. For metal cutting applications. Very heavy! Bring help to load!

26
THREE 3/4" PIPE CLAMPS
Three 3/4" pipe clamps with cast iron heads

27
HEAVY DUTY MANUAL METAL BENDER
Steel manual bender with dual base plates, fixed bolts, heavy welded construction, and approx. 34 in. working height. Buyer unbolts from floor.

28
TWO HAND PALLET JACKS IN NEED OF REPAIR
Two hydraulic pallet jacks with 2000 kg capacity each. Both in need of repair. One will not hold in lifted position. Other is missing a wheel.

29
RUBBERMAID MOP BUCKET, MOP AND WET FLOOR SIGN
Rubbermaid mop bucket, wringer, wet floor sign, and mop

30
HARDWARE BINS WITH FASTENERS AND PARTS
Bins of nuts, bolts, washers, machine screws, cotter pins, grinding wheels, and related hardware. Various sizes and types, all in plastic storage bins. Mounted to wall, buyer removes

31
STEEL SHEET STOCK IN VARIOUS SIZES
Steel sheet stock, some with oxidation. Largest sheets approx. 58x36 inches. Approx. 20 pieces as shown. Rack included. Very heavy! Bring help to load!

32
STEEL AND METAL STOCK RACK WITH SQUARE TUBING
Steel rack and various lengths of square and round metal tubing. Mixed metals, some with surface rust. Sold as one lot. Very heavy! Bring help to load!

33
METAL STOCK ROUND, SQUARE, ANGLES FLAT WITH RACK
Metal stock including round tubes, square tubes, angles, hinges, and flat bars in various sizes and materials. Includes homemade metal stock approx. 90"x72"H Very heavy! Bring help to load!

34
STEEL ANGLE IRON STOCK RACK
Heavy-duty welded steel rack, approx. 65"H x 60"W x 3"D. Five shelves for storage or material handling. Very heavy! Bring help to load!

35
ASSORTED SHEET METAL GOODS WITH MOBILE RACK
Includes multiple aluminum and steel sheets, round discs, mesh, and expanded metal, plus mobile steel storage rack. Largest sheet approx. 40x63 in. Very heavy! Bring help to load!

36
HOMEMADE METAL RACK WITH METAL STOCK
Steel rectangular, square, and round, stock flat bar, and angle iron. Aluminum, solid bar and assorted tubular material. Stock rack approx. 13ft by 77" H Very heavy. Bring help to load!

37
6 METAL SNOWMAN SILHOUETTES
6 steel snowman figures, each about 37 inches tall and 18 inches wide. Each has cutouts for eyes and buttons. some surface rust

38
ASSORTED ORNATE IRON PIECES
Approx forty 45 inch twisted iron baluster pieces with decorative scrollwork. Suitable for railings or gates. Barrel included. Very heavy! Bring help to load!

39
9 DRAWER MOBILE METAL TOOL CABINET
Metal file cabinet with 9 drawers, mounted on casters.

40
CAPSA COMPOSITE MEDICAL 5-DRAWER CART
Capsa Medical cart with keypad lock, five drawers, interior dividers, and casters for mobility. Missing key. Composite.

41
MILLER HF-251D-1 HIGH FREQUENCY ARC STARTER
Miller HF-251D-1, high frequency arc starter, 115VAC, 1.5A, 90W, serial no. KC221731, with attached cables and plug. Operating condition unknown.


43
TWO 2-TON HYDRAULIC FLOOR JACKS
Two 2-ton hydraulic floor jacks

44
PAIR KAR-RITE MODEL 1083 STEEL CAR RAMPS
Two Kar-Rite Model 1083 steel ramps support up to 6500 lbs.

45
METAL SHEET ROLLER AND SPECIALTY TOOL
Hand-crank sheet roller and specialty tool.

46
COMPOSITE AND METAL STORAGE HARDWARE BINS
Various sizes of composite and metal storage bins and boxes. Stackable.

46
TROJAN UVMAX D4 UNIT & MINI-FLORALUX LIGHT
Includes Trojan UVMax D4 water disinfection unit, control box, power supply, High Yield Mini-Floralux 150W HPS light, and accessories.

47
CRAFTSMAN 16" 36CC CHAINSAW WITH CASE
Craftsman chainsaw, 16 inch bar, 36cc engine. Includes carrying case. Pulls over!

48
BASSICK 4" SWIVEL CASTERS POLYURETHANE SET OF 5
Five Bassick 4" swivel casters with polyurethane wheels and grease fittings.

49
ASSORTED SOCKETS AND RATCHETS
Sockets, ratchets, and extensions, Craftsman 4-piece adapter set. Brands include S-K, Seccon, Snap-on and more.

50
6 ASSORTED HAMMERS
Six hammers including ball peen, rubber mallet, sledge, and claw hammer. Various makers and handle types.

51
LG QTY ASSORTED SCREWDRIVERS
Screwdrivers, various brands and handle types, mixed conditions. Includes both flathead and Phillips tips.

52
8 LOCKING PLIERS INCLUDING CRAFTSMAN & VISE-GRIP
8 locking pliers including Craftsman and Vise-Grip. Various sizes and jaw styles.

53
NUTDRIVERS, FILES, CHISELS & PUNCHES
Various screwdrivers, metal files, punches, chisels, and scrapers. Mix of assorted brands and materials.

54
6 ASSORTED HAMMERS
Six various hammers include ball peen, claw, and dead blow types with wood and rubber handles.

55
13 ADJUSTABLE WRENCHES
13 adjustable wrenches including Sears 30871, Crescent, Allen, Husky, and others.

56
ASSORTED PLIERS, SNIPS & STRIPPERS
Pliers, wire strippers, scissors, snips, various brands

57
NINE VISE-GRIP STYLE WELDING CLAMPS
Includes Irwin Vise-Grip and C-Hanson C-12C clamps. Various sizes

58
NAPA EVERCRAFT SANDER & CENTRAL PNEUMATIC CHISEL
Includes a NAPA Evercraft 6-inch air sander, Central Pneumatic air chisel attachments

59
PNEUMATIC AIR IMPACT & DIE GRINDERS
Includes Central Pneumatic air impact wrench, Campbell Hausfeld cut-off tool, and an air angle die grinder.

60
8 MIXED SIZE STEEL C CLAMPS
Includes 8 steel C clamps, various sizes, Largest clamp measures about 12 inches.

61
FULTON 2000 LB TRAILER JACK & WINCH LOT
Includes Fulton 2000 lb trailer jack, 2000 lb hand winch with cable, Class II hitches, and trailer hardware.

62
LG QTY INDUSTRIAL FASTENERS & HARWARE
Various metal fasteners in plastic bags. Items include screws, eye bolts, washers, and specialty hardware. quantities vary.

63
METAL CRAFT AND WEATHER VANE LOT
Large quantity mtal weather vane parts, figures, letters, and decorative cutouts, scrap pieces.

64
METAL ORNAMENTAL HARDWARE LOT
Metal leaves, finials, rosettes, and bases. Various unfinished decorative hardware pieces, some with minor rust.

65
CRAFTSMAN DIGITAL LEVEL, HAND SAWS AND MORE
CRAFTSMAN digital level, two box levels, a hand saw, and a hacksaw with wooden handles.

66
DIE WRENCHES WITH DIES AND METAL STORAGE BIN
Multiple die wrenches with round dies

67
ASSORTED SCREWDRIVERS AND IMPACT DRIVER
Screwdrivers with various handle types and brands, including Craftsman and Stanley, plus an impact driver set in case.

68
4 VARIOUS PNEUMATIC SANDERS
Includes pneumatic belt sander and three orbital sanders.

69
CENTRAL PNEUMATIC FRAMING & HITACHI BRAD NAILERS
Central Pneumatic 3-in-1 framing nailer. Hitachi NT50AE2 18GA 2" brad nailer in case

70
LARGE ASSORTED HAND DRILLS AND DRILL BITS
Includes two hand braces, assorted drill bits, auger bits, wood box, jar, and rotary burrs.

71
VINTAGE KWIK-TWIST 6D C-CLAMPS AND OTHERS
Kwik-Twist 6D clamps, One with bent handle.

72
6 ASSORTED HAMMERS
Ball Peen, claw and lead

73
MISC WELDING AND AIR TOOL ACCESSORIES LOT
Welding torch tips, air blow guns, regulator, Pittsburgh welding guide, slag hammer, and assorted fittings.

74
ASSORTED PLIERS, CUTTERS & SHEARS
Hand tools including pliers, wire cutters, snips, tin shears, and assorted grips. Various handle types and conditions.

75
ASSORTED ALLEN WRENCHES
Bulk lot of assorted Allen wrenches, various brands and conditions.

76
ASSORTED WRENCHES, SOCKETS & TORQUE WRENCH
Various open-end, box, and specialty wrenches, sockets, adapters, and a torque wrench. Assorted brands and sizes.

77
LARGE LOT OF SAW BLADES, GRINDING & SANDING DISCS
Includes Oldham carbide saw blade, 14" metal cutting disc, variety of sanding, grinding, and wire wheels, both loose and packaged, various grits.

78
VARIETY OF EXTENSION CORDS, STRAPS, & BUNGIES
Extension cords, power strips, work lamps, cargo straps, bungee cords

79
TARPS, TOTE, & CRATE
Various sizes and conditions

80
HARDWARE & ELECTRICAL & PLUMBING LOT
Timermatic controls, wire nuts, vintage glass doorknobs, PVC fittings, multimeter, PDA, and connectors.

81
SIX ASSORTED PIPE WRENCHES
Six heavy-duty pipe wrenches, includes RIDGID, HUSKY brands and others, various sizes.

82
ASSORTED HANDTOOLS
Pittsburgh 13-piece socket set, combination wrenches, hand saws, pliers, pipe cutter, and snips. Mixed brands.

83
5 POWER TOOLS INCLUDING BOSCH, SEARS, BLACK+DECKER
Includes Bosch angle grinder, Sears Craftsman reciprocating saw, Black+Decker jig saw, Black+Decker finishing sander and drill.

84
POWER TOOL LOT: SANDER, SAWS, DRILLS & BELTS
Black & Decker BR400 belt sander, DeWalt DW304P reciprocating saw, Milwaukee heat gun, Black & Decker 3/8" drill, Craftsman 3/8" drill, and Norton sandpaper belts.

85
RIDGID 4.5" ANGLE GRINDER W/DISKS AND BAG
RIDGID R1001 4.5-inch angle grinder with 8.0A motor, carrying case, extra grinding discs

86
POWER TOOL LOT: SKILSAW, MAKITA, BLACK & DECKER
Includes Skilsaw 2.5 HP 15A circular saw with Laser CutLine, Makita HP1501 drill, Black & Decker 5" portable grinder, and Torchmate cutting torch control unit.

87
WELDING WIRE WITH 2 PARTIAL SPOOLS, ONE UNOPENED
Avesta type E309LTO-1, 0.045" dia, 25 lbs, and L-TEC FC719, 1/16" dia, 35 lbs.

88
THERMADYNE ARCAIR ELECTRODES
Arcair copperclad pointed electrodes, 1/4" x 12" (cat. no. 24-056-003), and Clemco Aerolyte cabinet window cover lens kit.

89
THREE TECHALLOY RACO 316L-16 3/16 ELECTRODE ROD
Three unopened tubes of Techalloy Raco 316L-16 stainless steel welding electrodes, 3/16 diameter, plus one box Forney 6011 welding rod, 1/8 in

90
BLACK PLASTIC SWIVEL CASTER WHEELS
Approximately 50 black plastic swivel caster wheels.

91
BLACK PLASTIC SWIVEL CASTERS
Approximately 50 black plastic swivel casters.

92
POWERWINCH 12 VOLT ELECTRIC WINCH MODEL 315
Includes Powerwinch Model 315, mounting plate, hardware, and wiring kit. 12 volt electric.

93
RANDOM TOOL GROUP
Includes Ryobi 18.0V Tuff Sucker vacuum, Ryobi 18.0V circular saw, (no batteries)two MVP Pro-Lift 6-ton jack stands, shrink wrap, lug wrench, and SKIL tool bag.

94
LINCOLN K497-1 MAGNUM 200 GUN & CABLE ASSEMBLY
Lincoln Electric K497-1 Magnum 200, 200A gun, 15 ft (4.5m) cable, for 0.035-0.045 in (0.9-1.2mm) wire, includes accessories. Appears used

95
HAMMERS, PLIERR, AND RIVET MULTI-TOOL LOT
4 hammers, 1 rubber mallet, 1 vise-grip plier, 2 rivet tools, and Arrow assorted rivets pack.

96
MACHINIST TOOLS, WELDING MAGNET, LEVELS, ETC
Hand tools includes squares, levels, micrometers, tap handle, sockets, bracket, installation tool, sanding sleeves, and a scientific calculator.

97
MIXED HAND TOOL LOT WITH SOCKETS, CLAMPS & TESTER
Socket sets, clamps, hacksaw, voltage tester, pliers, hole saw kit, files, chain, metal bin.

98
SIX CASTERS, VISE & MITYVAC BLEED KIT
Four Colson 4x1-1/4" casters, Littlestown bench vise, Mityvac MV8000 test & bleed kit, and two metal casters.

99
MIXED HAND TOOLS AND HARDWARE LOT
Storehouse cotter pin assortment, magnetic parts tray, Linemaster Clipper foot switch, hooks, bits, screws, wire brush, and other assorted hand tools and hardware.

100
HARDWARE FASTENERS AND CONNECTORS LOT
Lot includes large quantity of screws, nuts, washers, clips, and connectors. Multiple bags and a box with bulk quantities.

101
BULK LOT ASSORTED METAL SCREWS AND NUTS IN BAGS
Large assorted lot of metal screws and nuts in sealed plastic bags. Includes various sizes and types.

102
METAL HARDWARE LOCKS, PARTS & FASTENERS
Large lot including many cam locks, rivets, bushings, fasteners, small metal hardware.

103
HARDWARE FASTENERS & LIMITED TOOLS
Square D 70A breaker panels, assorted bolts, screws, nuts, hinges, hand tools, containers, and hardware parts.

104
ASSORTED HAND TOOLS & TILE SAW
Craftsman toolbox with contents, QEP No. 22500 tile saw, Milwaukee tool, Husky spray gun, Unipunch, hand saws, and accessories.

105
PRIMITIVE METAL ANTIQUE ITEMS
Dutch oven marked 12 in, metal milk or water pail, green ammo box, cast iron kettle, and hand sythe with wood handle. Chip in Dutch oven lid

106
SQUARE POINT SHOVEL AND METAL PRY BAR
Square point shovel with a wooden handle and a long metal pry bar.

107
ASSORTED STEEL SHEETS AND HEAVY METAL CHAINS
Five steel plates, and a bucket of heavy metal chains.

108
METAL SHELF W/ HARDWARE & ASSORTED ITEMS
Metal shelving unit with assorted hardware, door slides, cans of paint thinner, mineral spirits, screws, glass lamp shades, loose tools, scrap metal and accessories.

109
STEEL METAL SCRAP AND STOCK LOT
Steel scrap and stock, includes pipes, tubes, bars, angle and flat stock in various shapes, conditions and materials

110
LARGE SCRAP METAL AND HARDWARE LOT WITH SHELF UNIT
Scrap steel, car fenders, batteries, framing nails, rods, metal hardware, ornate metal pieces and storage bins.

111
HOMEMADE STEEL STAND AND CUT STEEL PLATES
Homemade heavy-duty steel specialty tool with adjustable height. Includes multiple large, cut steel plate segments for fabrication.

112
SHOP SHELVING WITH CONTENTS OFHARDWARE AND TOOLS
Metal shelving unit loaded with screws, fasteners, chains, bearings, funnels, hardware accessories, empty tool cases, and organizers.

113
THREE 5-FT PIPE SHELF PIECES
Three 5-ft pipe shelf brackets with adjustable green cast jaws, used for heavy duty shelving units

114
INDUSTRIAL STEEL SHELVING & CONTENTS
Steel shelves 66"W x 19"D x 45"H, assorted plastic and metal components, including washers, spacers, hangers, and hardware. 3 very heavy steel pieces (see photos)

115
STEEL SCRAP AND METAL STOCK
Large quantity includes steel flat bar, round tube, rods, patterned and decorative scrap, plates and box tubing. Many heavy pieces! Various sizes and shapes.

116
TROY-BILT SUPER BRONCO TILLER
Troy-Bilt Super Bronco CRT garden tiller with 6.0 HP Briggs & Stratton engine, Pulls over. Operating condition unknown.

117
HUSQVARNA AWD LAWNMOWER
Husqvarna HU725AWD lawnmower, 22 inch, 190cc engine Briggs & Stratton engine, AWD, Pulls over. Operating condition unknown.

118
JOHN DEERE D170 LAWN TRACTOR
John Deere D170 lawn tractor with 25HP engine, 54-inch Edge Cutting System, and 448.4 hours on meter. Model GXD170EJGG8707049. Turns over. Did not start.

119
2 TON MOBILE SHOP CRANE ENGINE HOIST
Folding shop crane, 2 ton max capacity, mobile with caster wheels, adjustable lift arm from 0.5 to 2 tons.

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Xtremetalworks Metal Fabrication Business
 Online Only Auction
Sale Date(s)
Bidding Starts: Friday Nov 20
Bidding Ends: Tuesday Dec 1
Sale Location
6440 North Avon Road
Honeoye Falls, NY 14472
Company
Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and conditions of this Auction: AUCTION TERMS & CONDITIONS " Out-of-state buyers without an established HiBid history will not be permitted to bid. " All bidders must register prior to placing any bids. " Bids cannot be retracted or modified once the auction begins. " All sales are final. All items are sold "AS IS", with no guarantees or warranties of any kind, including warranty of merchantability. By placing a bid, the purchaser accepts the item in its current "AS IS" condition. " It is the bidder's responsibility to determine the condition of items prior to bidding. We strongly recommend inspecting lots before placing bids. " All condition reports provided by Reynolds Auction Co. are subjective opinions. Reynolds Auction Co. is not responsible for errors in description, including but not limited to age, size, measurements, condition, rarity, importance, or provenance. Descriptions are provided for informational purposes only. " A 15% Buyer's Premium will be added to all purchases. " Credit cards are the only accepted form of payment for this auction. We accept Visa and MasterCard only. " Purchases exceeding $2,000 for gold, sterling silver, jewelry, vehicles and equipment may require payment by certified funds or wire transfer unless prior arrangements are made. No other forms of payment will be accepted. " Payment is due in full within the time limits posted for the auction. All payments will be processed using the credit card provided at registration. " A 15% Buyer's Premium and NYS Sales Tax (for NYS buyers) will be added to all applicable purchases. Tax exemption information must be entered before the auction closes. No refunds will be issued for tax charged due to missing or late exemption documentation. " By bidding in this auction, you enter into a binding contract and agree to these Terms and Conditions. Winning bidders accept full responsibility for completing their purchase. Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors, shall not be held liable for any losses, claims, liabilities, or judgments. " Reynolds Auction Co. shall not be held liable for any expenses, fees, or other damages arising from the use of our services, website, auction property, or this site, including but not limited to property damage, personal injury, disputes between bidders, or any breach of these terms by a bidder. " All successful bidders are required to sign their receipt at the time of pickup, acknowledging that all items have been received and are in satisfactory condition. There will be no returns, refunds, or exchanges. This is an auction sale and not a retail transaction. " Reynolds Auction Co. is not responsible for any delays or interruptions in internet service, errors, or omissions caused by any means. We do not guarantee continual, uninterrupted, or error-free service or use of the website. " Reynolds Auction Co. reserves the right to suspend bidding, withdraw or re-sell any item or lot, and/or void any sale at its sole discretion and for any reason. " All sales are subject to applicable New York State sales tax for NYS buyers. A 15% Buyer's Premium will be added to the purchase price of every item. " If you are tax exempt, you must indicate your exemption at the time of registration and provide a valid, current exemption certificate before the auction closes. " If proper documentation is not received no later than 4:00 PM EST on the day the auction closes sales tax will be charged. Once the auction concludes and credit cards have been processed, sales tax will not be removed or refunded. " Bids cannot be retracted or modified once the auction begins. " All items must be picked up within the scheduled pickup timeframe. Please carefully review the posted pickup dates and times. If you are unable to attend, you must arrange for someone to pick up your items on your behalf. Please Note: Shipping is available on certain items, please see shipping policy. No alternative pickup times will be offered. " If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued. " If items are not removed and no prior arrangements have been made, any items left after 14 days will become the property of Reynolds Auction Co. and may be resold or disposed of at our discretion. No refunds will be issued. " Reynolds Auction Co. is not liable for any damage to property left on the auction premises after the auction and designated pickup timeframe has concluded. We are also not responsible for damage to items during transport or storage after the auction day and scheduled pickup period. No refunds will be issued for items damaged after these timeframes have ended. " There are no refunds or returns on any items sold in this auction.
Selling remaining contents of Tom Batz owner of Xtremetalworks a custom fabrication of outdoor art. Welding equipment, tools, metal stock, John Deere mower, and scrap metal. Strict pick up day and time, please do not bid if you can not pick up your purchases. Skidsteer on site for loading large equipment. Please bring help. You can find the auction at https://reynoldsauctioncompany.hibid.com Starts: November 20th, 2026 Ends: Tuesday December 1st, 2026 @7PM Soft close/extended bidding. Local pick up, Thursday December 3rd, 10-4 pm @ 6440 North Avon Road, Honeoye Falls NY 14472 RESALE TAX BUYERS - NEW YORK STATE RESIDENTS New York State law requires us to collect sales tax unless we have a valid resale or exemption certificate on file. All required exemption documentation must be submitted no later than 4:00 PM EST on the day the auction closes. If the proper forms are not received by that time, sales tax will be charged. Please note: Once sales tax has been charged, it will NOT be refunded. To avoid delays or additional charges, we strongly encourage you to submit your exemption documentation as early as possible. Thank you for your prompt attention to this matter.

1

2

3

4

5
CENTRAL MACHINERY BANDSAW
Central Machinery bandsaw, model T-591/9912, serial 36086

6
OXY-ACETYLENE TORCH & CART, HOSES, & REGULATORS
Includes gauges, hoses, torch handle, helmets, regulators, and wheeled cart. Overall torch handle length approximately 16 inches.

7
CENTRAL HYDRAULICS 12 TON PIPE BENDER
Central Hydraulics pipe bender with 12 ton hydraulic jack and five bending dies: 1/2 in, 3/4 in, 1 in, 1-1/4 in, 1-1/2 in.

8
CRAFTSMAN 10-IN BENCHTOP DRILL PRESS WITH STAND
Craftsman Model 137.219100, 120V, 1/2 HP, 5 speeds. Table 16x13x30"height, 1/2" chuck. Very heavy! Bring help to load!

9
1 TON MOBILE GANTRY CRANE & CHAIN HOIST
Heavy-duty 6" ibeam channel gantry crane, 1 ton capacity, Pittsburgh chain hoist, approx. 7 ft beam, 32 in base width, rolling casters. Top ibeam needs to be removed to exit building. Very heavy! Come prepared with tools and help.

10
HEAVY DUTY INDUSTRIAL SCROLL BENDER
Large industrial scroll bender with assorted dies and electric motor. Manual control lever. 3-phase power plug attached. Very heavy! Skidsteer on site for loading.

11
CINCINNATI BENCH GRINDER 2HP 208V
Cincinnati Electrical Tool Co. bench grinder, 2 HP, 208V, with grinding and wire wheels on pedestal. Industrial-grade unit. Very heavy! Bring help to load!

12
BERG MFG CORP PUNCH PRESS SERIAL D1798
Berg Manufacturing Corp punch press, serial D1798, New Cumberland, PA. Visible wear and frayed power cord. Operating condition unknown. Very heavy! Bring help to load!

13
MOBILE STEEL WELDING TABLE
Steel welding table with casters, 24x24 inch top, 30 inches tall. Includes a 52-inch extension arm with welded arm attachment.

14
CENTRAL TRACTOR 5HP 230V AIR COMPRESSOR
Central Tractor Farm & Family Center air compressor, 5 HP, 230V, with attached hose. Serial BE3-24.

15
AIR HOSES WITH FITTINGS
Five air hoses in various lengths and colors, mixed condition

16
HEAT SURGE ELECTRIC FIREPLACE
Heat Surge electric fireplace, model ADL-2000M-X

17
ROLLING MACHINE WITH IRONMAN MOTOR
Steel rolling machine, IronMan by Ohio Gear 0.59 HP motor, with control pedal and wiring. Includes frame on wheels. Includes two additional electric motors (working condition unknown)

18
MILWAUKEE PNEUMATIC TIRE HAND CART
Milwaukee hand cart with pneumatic tires and adjustable length handle.

19
AIRCO 250 AC/DC HELIWELDER V ARC WELDER SETUP
Includes AIRCO Heliwelder V, control panel, foot pedal, cables with exposed wires, and BINZEL WK43 coolant recirculator. 220 volt. operating condition unknown, Very heavy! Bring help to load!

20
CRAFTSMAN 10" RADIAL ARM SAW W/STAND
Craftsman 10 inch radial arm saw with stand. Operates.

21
NINE HAND-OPERATED GREASE GUNS AND FUNNELS
Manual grease guns, oil funnels, and a metal bin. Includes approx. 9 grease guns, various styles and conditions.

22
METAL 32 BIN STORAGE UNIT, LARGE QTY OF HARDWARE.
Steel rolling bin with yellow storage bins. Contains large supply of assorted fasteners, washers, nuts, bolts, wheels, discs, and hardware parts.

23
BENCH GRINDER LOT W/ WORK TABLE 42X27X37 IN
Includes Speedway Series 3/4 HP 8 in grinder, Delta 6 in bench grinder, and a heavy metal table on casters.

24
METAL INDUSTRIAL MOBILE WORK TABLE
Metal mobile work table with four wheels. Includes a lower shelf.

25
JET HORIZONTAL/VERTICAL BANDSAW & COOLANT SYSTEM
JET model HVBS-7MW bandsaw with coolant system and roller stands. Includes rollers and 80-inch conveyor. For metal cutting applications. Very heavy! Bring help to load!

26
THREE 3/4" PIPE CLAMPS
Three 3/4" pipe clamps with cast iron heads

27
HEAVY DUTY MANUAL METAL BENDER
Steel manual bender with dual base plates, fixed bolts, heavy welded construction, and approx. 34 in. working height. Buyer unbolts from floor.

28
TWO HAND PALLET JACKS IN NEED OF REPAIR
Two hydraulic pallet jacks with 2000 kg capacity each. Both in need of repair. One will not hold in lifted position. Other is missing a wheel.

29
RUBBERMAID MOP BUCKET, MOP AND WET FLOOR SIGN
Rubbermaid mop bucket, wringer, wet floor sign, and mop

30
HARDWARE BINS WITH FASTENERS AND PARTS
Bins of nuts, bolts, washers, machine screws, cotter pins, grinding wheels, and related hardware. Various sizes and types, all in plastic storage bins. Mounted to wall, buyer removes

31
STEEL SHEET STOCK IN VARIOUS SIZES
Steel sheet stock, some with oxidation. Largest sheets approx. 58x36 inches. Approx. 20 pieces as shown. Rack included. Very heavy! Bring help to load!

32
STEEL AND METAL STOCK RACK WITH SQUARE TUBING
Steel rack and various lengths of square and round metal tubing. Mixed metals, some with surface rust. Sold as one lot. Very heavy! Bring help to load!

33
METAL STOCK ROUND, SQUARE, ANGLES FLAT WITH RACK
Metal stock including round tubes, square tubes, angles, hinges, and flat bars in various sizes and materials. Includes homemade metal stock approx. 90"x72"H Very heavy! Bring help to load!

34
STEEL ANGLE IRON STOCK RACK
Heavy-duty welded steel rack, approx. 65"H x 60"W x 3"D. Five shelves for storage or material handling. Very heavy! Bring help to load!

35
ASSORTED SHEET METAL GOODS WITH MOBILE RACK
Includes multiple aluminum and steel sheets, round discs, mesh, and expanded metal, plus mobile steel storage rack. Largest sheet approx. 40x63 in. Very heavy! Bring help to load!

36
HOMEMADE METAL RACK WITH METAL STOCK
Steel rectangular, square, and round, stock flat bar, and angle iron. Aluminum, solid bar and assorted tubular material. Stock rack approx. 13ft by 77" H Very heavy. Bring help to load!

37
6 METAL SNOWMAN SILHOUETTES
6 steel snowman figures, each about 37 inches tall and 18 inches wide. Each has cutouts for eyes and buttons. some surface rust

38
ASSORTED ORNATE IRON PIECES
Approx forty 45 inch twisted iron baluster pieces with decorative scrollwork. Suitable for railings or gates. Barrel included. Very heavy! Bring help to load!

39
9 DRAWER MOBILE METAL TOOL CABINET
Metal file cabinet with 9 drawers, mounted on casters.

40
CAPSA COMPOSITE MEDICAL 5-DRAWER CART
Capsa Medical cart with keypad lock, five drawers, interior dividers, and casters for mobility. Missing key. Composite.

41
MILLER HF-251D-1 HIGH FREQUENCY ARC STARTER
Miller HF-251D-1, high frequency arc starter, 115VAC, 1.5A, 90W, serial no. KC221731, with attached cables and plug. Operating condition unknown.

42

43
TWO 2-TON HYDRAULIC FLOOR JACKS
Two 2-ton hydraulic floor jacks

44
PAIR KAR-RITE MODEL 1083 STEEL CAR RAMPS
Two Kar-Rite Model 1083 steel ramps support up to 6500 lbs.

45
METAL SHEET ROLLER AND SPECIALTY TOOL
Hand-crank sheet roller and specialty tool.

46
COMPOSITE AND METAL STORAGE HARDWARE BINS
Various sizes of composite and metal storage bins and boxes. Stackable.

46
TROJAN UVMAX D4 UNIT & MINI-FLORALUX LIGHT
Includes Trojan UVMax D4 water disinfection unit, control box, power supply, High Yield Mini-Floralux 150W HPS light, and accessories.

47
CRAFTSMAN 16" 36CC CHAINSAW WITH CASE
Craftsman chainsaw, 16 inch bar, 36cc engine. Includes carrying case. Pulls over!

48
BASSICK 4" SWIVEL CASTERS POLYURETHANE SET OF 5
Five Bassick 4" swivel casters with polyurethane wheels and grease fittings.

49
ASSORTED SOCKETS AND RATCHETS
Sockets, ratchets, and extensions, Craftsman 4-piece adapter set. Brands include S-K, Seccon, Snap-on and more.

50
6 ASSORTED HAMMERS
Six hammers including ball peen, rubber mallet, sledge, and claw hammer. Various makers and handle types.

51
LG QTY ASSORTED SCREWDRIVERS
Screwdrivers, various brands and handle types, mixed conditions. Includes both flathead and Phillips tips.

52
8 LOCKING PLIERS INCLUDING CRAFTSMAN & VISE-GRIP
8 locking pliers including Craftsman and Vise-Grip. Various sizes and jaw styles.

53
NUTDRIVERS, FILES, CHISELS & PUNCHES
Various screwdrivers, metal files, punches, chisels, and scrapers. Mix of assorted brands and materials.

54
6 ASSORTED HAMMERS
Six various hammers include ball peen, claw, and dead blow types with wood and rubber handles.

55
13 ADJUSTABLE WRENCHES
13 adjustable wrenches including Sears 30871, Crescent, Allen, Husky, and others.

56
ASSORTED PLIERS, SNIPS & STRIPPERS
Pliers, wire strippers, scissors, snips, various brands

57
NINE VISE-GRIP STYLE WELDING CLAMPS
Includes Irwin Vise-Grip and C-Hanson C-12C clamps. Various sizes

58
NAPA EVERCRAFT SANDER & CENTRAL PNEUMATIC CHISEL
Includes a NAPA Evercraft 6-inch air sander, Central Pneumatic air chisel attachments

59
PNEUMATIC AIR IMPACT & DIE GRINDERS
Includes Central Pneumatic air impact wrench, Campbell Hausfeld cut-off tool, and an air angle die grinder.

60
8 MIXED SIZE STEEL C CLAMPS
Includes 8 steel C clamps, various sizes, Largest clamp measures about 12 inches.

61
FULTON 2000 LB TRAILER JACK & WINCH LOT
Includes Fulton 2000 lb trailer jack, 2000 lb hand winch with cable, Class II hitches, and trailer hardware.

62
LG QTY INDUSTRIAL FASTENERS & HARWARE
Various metal fasteners in plastic bags. Items include screws, eye bolts, washers, and specialty hardware. quantities vary.

63
METAL CRAFT AND WEATHER VANE LOT
Large quantity mtal weather vane parts, figures, letters, and decorative cutouts, scrap pieces.

64
METAL ORNAMENTAL HARDWARE LOT
Metal leaves, finials, rosettes, and bases. Various unfinished decorative hardware pieces, some with minor rust.

65
CRAFTSMAN DIGITAL LEVEL, HAND SAWS AND MORE
CRAFTSMAN digital level, two box levels, a hand saw, and a hacksaw with wooden handles.

66
DIE WRENCHES WITH DIES AND METAL STORAGE BIN
Multiple die wrenches with round dies

67
ASSORTED SCREWDRIVERS AND IMPACT DRIVER
Screwdrivers with various handle types and brands, including Craftsman and Stanley, plus an impact driver set in case.

68
4 VARIOUS PNEUMATIC SANDERS
Includes pneumatic belt sander and three orbital sanders.

69
CENTRAL PNEUMATIC FRAMING & HITACHI BRAD NAILERS
Central Pneumatic 3-in-1 framing nailer. Hitachi NT50AE2 18GA 2" brad nailer in case

70
LARGE ASSORTED HAND DRILLS AND DRILL BITS
Includes two hand braces, assorted drill bits, auger bits, wood box, jar, and rotary burrs.

71
VINTAGE KWIK-TWIST 6D C-CLAMPS AND OTHERS
Kwik-Twist 6D clamps, One with bent handle.

72
6 ASSORTED HAMMERS
Ball Peen, claw and lead

73
MISC WELDING AND AIR TOOL ACCESSORIES LOT
Welding torch tips, air blow guns, regulator, Pittsburgh welding guide, slag hammer, and assorted fittings.

74
ASSORTED PLIERS, CUTTERS & SHEARS
Hand tools including pliers, wire cutters, snips, tin shears, and assorted grips. Various handle types and conditions.

75
ASSORTED ALLEN WRENCHES
Bulk lot of assorted Allen wrenches, various brands and conditions.

76
ASSORTED WRENCHES, SOCKETS & TORQUE WRENCH
Various open-end, box, and specialty wrenches, sockets, adapters, and a torque wrench. Assorted brands and sizes.

77
LARGE LOT OF SAW BLADES, GRINDING & SANDING DISCS
Includes Oldham carbide saw blade, 14" metal cutting disc, variety of sanding, grinding, and wire wheels, both loose and packaged, various grits.

78
VARIETY OF EXTENSION CORDS, STRAPS, & BUNGIES
Extension cords, power strips, work lamps, cargo straps, bungee cords

79
TARPS, TOTE, & CRATE
Various sizes and conditions

80
HARDWARE & ELECTRICAL & PLUMBING LOT
Timermatic controls, wire nuts, vintage glass doorknobs, PVC fittings, multimeter, PDA, and connectors.

81
SIX ASSORTED PIPE WRENCHES
Six heavy-duty pipe wrenches, includes RIDGID, HUSKY brands and others, various sizes.

82
ASSORTED HANDTOOLS
Pittsburgh 13-piece socket set, combination wrenches, hand saws, pliers, pipe cutter, and snips. Mixed brands.

83
5 POWER TOOLS INCLUDING BOSCH, SEARS, BLACK+DECKER
Includes Bosch angle grinder, Sears Craftsman reciprocating saw, Black+Decker jig saw, Black+Decker finishing sander and drill.

84
POWER TOOL LOT: SANDER, SAWS, DRILLS & BELTS
Black & Decker BR400 belt sander, DeWalt DW304P reciprocating saw, Milwaukee heat gun, Black & Decker 3/8" drill, Craftsman 3/8" drill, and Norton sandpaper belts.

85
RIDGID 4.5" ANGLE GRINDER W/DISKS AND BAG
RIDGID R1001 4.5-inch angle grinder with 8.0A motor, carrying case, extra grinding discs

86
POWER TOOL LOT: SKILSAW, MAKITA, BLACK & DECKER
Includes Skilsaw 2.5 HP 15A circular saw with Laser CutLine, Makita HP1501 drill, Black & Decker 5" portable grinder, and Torchmate cutting torch control unit.

87
WELDING WIRE WITH 2 PARTIAL SPOOLS, ONE UNOPENED
Avesta type E309LTO-1, 0.045" dia, 25 lbs, and L-TEC FC719, 1/16" dia, 35 lbs.

88
THERMADYNE ARCAIR ELECTRODES
Arcair copperclad pointed electrodes, 1/4" x 12" (cat. no. 24-056-003), and Clemco Aerolyte cabinet window cover lens kit.

89
THREE TECHALLOY RACO 316L-16 3/16 ELECTRODE ROD
Three unopened tubes of Techalloy Raco 316L-16 stainless steel welding electrodes, 3/16 diameter, plus one box Forney 6011 welding rod, 1/8 in

90
BLACK PLASTIC SWIVEL CASTER WHEELS
Approximately 50 black plastic swivel caster wheels.

91
BLACK PLASTIC SWIVEL CASTERS
Approximately 50 black plastic swivel casters.

92
POWERWINCH 12 VOLT ELECTRIC WINCH MODEL 315
Includes Powerwinch Model 315, mounting plate, hardware, and wiring kit. 12 volt electric.

93
RANDOM TOOL GROUP
Includes Ryobi 18.0V Tuff Sucker vacuum, Ryobi 18.0V circular saw, (no batteries)two MVP Pro-Lift 6-ton jack stands, shrink wrap, lug wrench, and SKIL tool bag.

94
LINCOLN K497-1 MAGNUM 200 GUN & CABLE ASSEMBLY
Lincoln Electric K497-1 Magnum 200, 200A gun, 15 ft (4.5m) cable, for 0.035-0.045 in (0.9-1.2mm) wire, includes accessories. Appears used

95
HAMMERS, PLIERR, AND RIVET MULTI-TOOL LOT
4 hammers, 1 rubber mallet, 1 vise-grip plier, 2 rivet tools, and Arrow assorted rivets pack.

96
MACHINIST TOOLS, WELDING MAGNET, LEVELS, ETC
Hand tools includes squares, levels, micrometers, tap handle, sockets, bracket, installation tool, sanding sleeves, and a scientific calculator.

97
MIXED HAND TOOL LOT WITH SOCKETS, CLAMPS & TESTER
Socket sets, clamps, hacksaw, voltage tester, pliers, hole saw kit, files, chain, metal bin.

98
SIX CASTERS, VISE & MITYVAC BLEED KIT
Four Colson 4x1-1/4" casters, Littlestown bench vise, Mityvac MV8000 test & bleed kit, and two metal casters.

99
MIXED HAND TOOLS AND HARDWARE LOT
Storehouse cotter pin assortment, magnetic parts tray, Linemaster Clipper foot switch, hooks, bits, screws, wire brush, and other assorted hand tools and hardware.

100
HARDWARE FASTENERS AND CONNECTORS LOT
Lot includes large quantity of screws, nuts, washers, clips, and connectors. Multiple bags and a box with bulk quantities.

101
BULK LOT ASSORTED METAL SCREWS AND NUTS IN BAGS
Large assorted lot of metal screws and nuts in sealed plastic bags. Includes various sizes and types.

102
METAL HARDWARE LOCKS, PARTS & FASTENERS
Large lot including many cam locks, rivets, bushings, fasteners, small metal hardware.

103
HARDWARE FASTENERS & LIMITED TOOLS
Square D 70A breaker panels, assorted bolts, screws, nuts, hinges, hand tools, containers, and hardware parts.

104
ASSORTED HAND TOOLS & TILE SAW
Craftsman toolbox with contents, QEP No. 22500 tile saw, Milwaukee tool, Husky spray gun, Unipunch, hand saws, and accessories.

105
PRIMITIVE METAL ANTIQUE ITEMS
Dutch oven marked 12 in, metal milk or water pail, green ammo box, cast iron kettle, and hand sythe with wood handle. Chip in Dutch oven lid

106
SQUARE POINT SHOVEL AND METAL PRY BAR
Square point shovel with a wooden handle and a long metal pry bar.

107
ASSORTED STEEL SHEETS AND HEAVY METAL CHAINS
Five steel plates, and a bucket of heavy metal chains.

108
METAL SHELF W/ HARDWARE & ASSORTED ITEMS
Metal shelving unit with assorted hardware, door slides, cans of paint thinner, mineral spirits, screws, glass lamp shades, loose tools, scrap metal and accessories.

109
STEEL METAL SCRAP AND STOCK LOT
Steel scrap and stock, includes pipes, tubes, bars, angle and flat stock in various shapes, conditions and materials

110
LARGE SCRAP METAL AND HARDWARE LOT WITH SHELF UNIT
Scrap steel, car fenders, batteries, framing nails, rods, metal hardware, ornate metal pieces and storage bins.

111
HOMEMADE STEEL STAND AND CUT STEEL PLATES
Homemade heavy-duty steel specialty tool with adjustable height. Includes multiple large, cut steel plate segments for fabrication.

112
SHOP SHELVING WITH CONTENTS OFHARDWARE AND TOOLS
Metal shelving unit loaded with screws, fasteners, chains, bearings, funnels, hardware accessories, empty tool cases, and organizers.

113
THREE 5-FT PIPE SHELF PIECES
Three 5-ft pipe shelf brackets with adjustable green cast jaws, used for heavy duty shelving units

114
INDUSTRIAL STEEL SHELVING & CONTENTS
Steel shelves 66"W x 19"D x 45"H, assorted plastic and metal components, including washers, spacers, hangers, and hardware. 3 very heavy steel pieces (see photos)

115
STEEL SCRAP AND METAL STOCK
Large quantity includes steel flat bar, round tube, rods, patterned and decorative scrap, plates and box tubing. Many heavy pieces! Various sizes and shapes.

116
TROY-BILT SUPER BRONCO TILLER
Troy-Bilt Super Bronco CRT garden tiller with 6.0 HP Briggs & Stratton engine, Pulls over. Operating condition unknown.

117
HUSQVARNA AWD LAWNMOWER
Husqvarna HU725AWD lawnmower, 22 inch, 190cc engine Briggs & Stratton engine, AWD, Pulls over. Operating condition unknown.

118
JOHN DEERE D170 LAWN TRACTOR
John Deere D170 lawn tractor with 25HP engine, 54-inch Edge Cutting System, and 448.4 hours on meter. Model GXD170EJGG8707049. Turns over. Did not start.

119
2 TON MOBILE SHOP CRANE ENGINE HOIST
Folding shop crane, 2 ton max capacity, mobile with caster wheels, adjustable lift arm from 0.5 to 2 tons.