Surplus Equipment from an Alternative Energy Producer
Listing ID#: 238107

Sale Location

, CA
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Wednesday May 22, 08:00 AM
Bidding Ends: Thursday May 23, 04:00 PM
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Equipment Dispositions

Phone: 408-402-2436
Email: jr@edispositions.com
Website: edispositions.com

EstateSale.com ID#: 10990
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

TERMS AND CONDITIONS


 



  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba Disposition Services ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  

  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.

  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.

  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.

  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.

  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.

  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.

  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.

  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.

  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 

  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  

  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.

  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.

  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.

  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.

  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.

  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.

  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.

  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.

  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.

  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.

  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.

  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 

  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 

  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 

  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.

  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.

  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


Listing Information

1
JSM-6335F SEM / FEM Field Emmission Scanning Electron Microscope - Ft. Collins, CO

2
Fritsch Pulverisette 5 Orbital Pulverizer - Ft. Collins, CO
Fritsch Pulverisette 5 Orbital Pulverizer  - Ft. Collins, CO

3
AirGuard 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box
AirGuardrd 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box

4
Lindberg Laboratory Tube Furnace - Ft. Collins, CO

5
Brookfield 2X-HBDV-11 Cone Plate Digital Viscometer - Ft. Collins, CO

6
Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO
'Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO

7
DEK Horizon 265-HOZ Screen Printer

8
Centrotherm CT-BW H300K2S M0C4D Wet Scrubber With Spare Parts, Ft. Collins, CO

9
Neslab Coolflow CFT-75 Refrigerated Recirculator With Wheels, Ft. Collins, CO

10
Agilent / HP 4145B Semiconductor Parameter Analyzer, Ft. Collins, CO

11
Thermo Neslab RTE7 Refrigerated Recirculator, Ft. Collins, CO

12
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO

13
Lot Consisting of Qty-2 Windsor Carpet Extractors, Ft. Collins, CO
Lot Consisting of Qty-2 Windsor Carpet Extractors (1) Windsor Commadore 20 & (1) Windsor Carpet Extractor w Extension Cord, Ft. Collins, CO

14
Agilent HP 54815A Infinium Oscilloscope, Ft. Collins, CO

15
Karl Muller ElektrorHRD 1/5 High Velocity Blower, Ft. Collins, CO

16
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO

17
Hewlett Packard 54815A Digitizing Oscilloscope

18
Haskris R75 Heat Exchanger Recirculating Chiller Bath, Ft. Collins, CO

19
Yeong Shin Digital Circulating Heated Water Bath, Ft. Collins, CO

20
HP 8082A Pulse Generator, Ft. Collins, CO

21
Faxitron CS-100AC Circuit Scan Industrial X-Ray Inspection System, Ft. Collins, CO

22
Perkin Elmer 4400 Sputtering / Evaporator System

93
Sony STR-DH190 Stereo Receiver - Gilroy
Sony STR-DH190 Stereo Receiver. Open box, appears to be in excellent condition. Powers on as shown. Comes with manual, remote, and power cord as shown. Proceeds from this item benefit a local non-p...

94
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable - Gilroy
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable (USB and Analog). Open box but it appears to still be in the original wrapping. Proceeds from this item benefit a local non-pr...

95
Google Chromecast Ultra - Gilroy
Google Chromecast Ultra. Used open box item. Comes with Chromecast unit and power supply. Proceeds from this item benefit a local non-profit organization.

96
Google Home Mini. Factory sealed box - Gilroy
Google Home Mini. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

97
Arris SB6141 SURFboard Cable Modem - Gilroy
Arris SB6141 SURFboard Cable Modem. Open box, appears to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

98
Motorola MB7621 24x8 Cable Modem, Factory sealed box - Gilroy
Motorola MB7621 24x8 Cable Modem. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

99
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo - Gilroy
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo. Open box, appears to be in excellent condition. Powers on as shown. Proceeds from this item benefit a local non-profit organization.

100
Pioneer SP-BS22-LR Bookshelf Speakers - Gilroy
Pioneer SP-BS22-LR Bookshelf Speakers Andrew Jones Designed. Open box, appear to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

101
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1 - Gilroy
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1. It powers up and the inside gets cold. The handle moves smoothly and I am able to get response from the buttons as well.

102
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

103
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler - Gilroy
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler. I am unable to power on or test the spectrometer due to lack of appropriate power receptacle to plug the unit into. The autosample...

104
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder - Gilroy
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder w...

105
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B) - Gilroy
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B). It will include a microscope and workholder. We do not currently have the other head/clamps for it.

106
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder - Gilroy
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperatu...

107
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder - Gilroy
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder. It comes with everything shown, including a model 1600 Ultrasonic Generator, and a B&L SZ4 StereoZoom 4 Microscope (0.7X to ...

108
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller - Gilroy
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Work...

109
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads - Gilroy
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads. The unit powers-up as shown, although I simply do not have the tools or training to formally test this system, therefore no o...

110
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder - Gilroy
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder.It currently has a 22gm Pull Test Load Cell installed.

111
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table - Gilroy
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table. The unit powers-up and heats to the preset temperature. Once it has stabilized at the set temperature, you can initiate the cycle with the ...

112
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

113
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

114
Kadel Engineering Liquid Nitrogen Tank - Gilroy
Kadel Engineering Liquid Nitrogen Tank.

115
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3 - Gilroy
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3. It powered on as shown in the photos above, but this is all it did. I do not know how to move about the various screens or test...

116
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly - Gilroy
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly. I tried powering-up the pumps individually, the QMB250 Booster Pump powers-up although just the motor runs, the impellers do not rotate. The Q...

117
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B - Gilroy
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B. It powers up, and recirculates and heats and cools water successfully, and I was able to adjust the set point. The locking lever on t...

118
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900 - Gilroy
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900. It powered on with no problems and I was able to move about in several screens.

119
Bio-Rad Hydro-Tech Vacuum Pump - Gilroy
Bio-Rad Hydro-Tech Vacuum Pump. It powered on as I could hear it running.

120
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

121
Technics Plasma Processor 200E P.P.-200E - Gilroy
Technics Plasma Processor 200E P.P.-200E. This unit requires 220 VAC, 10A, 50Hz power for operation.

122
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H - Gilroy
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H. I noticed some cables inside have been cut so I did not attempt to power it on.

123
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor - Gilroy
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor.

124
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange - Gilroy
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange.

125
Flow Sciences FS2350 Vented Balance Safety Enclosure - Gilroy
Flow Sciences FS2350 Vented Balance Safety Enclosure. This listing also includes an FS1645 alarm kit.

126
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges - Gilroy
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges. I was able to power on this unit. I had to open and shut the tray several times to be able to run a degaussing cycle, and th...

127
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump - Gilroy
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump.

128
Grundfos BD050I3 85Z02410 Vertical Multistage Pump - Gilroy
Grundfos BD050I3 85Z02410 Vertical Multistage Pump.

129
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump.

130
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump.

131
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump - Gilroy
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump.

132
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump

133
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing - Gilroy
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing. The door on this unit opens and closes smoothly, and is self closing. Unit includes one shelf and two keys.

134
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet - Gilroy
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet.

135
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max - Gilroy
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max. I was able to power on this unit, and it was able to heat up to approximately 170ºC during my testing, over the course of approximately an hour. The...

136
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves - Gilroy
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves. The unit powers-up, although without a water input/output connection the unit has a loud audible alarm, therefore no testing ...

137
VWR Scientific Model 1265PC Heated Circulating Water Bath - Gilroy
VWR Scientific Model 1265PC Heated Circulating Water Bath. I was able to power on this unit, and it circulates the water as well as heating as expected. I was able to heat water to approximately 40...

138
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity - Gilroy
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity.

139
Mactronix Eureka BBS-400 Wafer Transfer Station - Gilroy
Mactronix Eureka BBS-400 Wafer Transfer Station. The unit powers-up pneumatically & the transfer arm moves up/down smooth & quietly, although this is the only testing that has been performed.

140
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A - Gilroy
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A. The 16700A has three Plug-Ins installed: 16534A 2GSa/s Oscilloscope, 16517A Master Plug-In (4GHz Timing, 1GHz Synchronous) w...

141
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer - Gilroy
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer. This Gaertner Scientific L117 Ellipsometer features an Imaging Source DBK31BU03 Video Camera, and a Computer with Mouse (a Monitor ...

142
VWR SCBMF-2020 Lab Freezer -20F -12C - Gilroy
VWR SCBMF-2020 Lab Freezer -20F -12C. It powered on and got down to set point fairly quickly before I turned it off.

143
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C - Gilroy
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C. It powers up, and recirculates and chills water successfully. When set to the minimum set point of 4.0°C, the temperature f...

144
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor - Gilroy
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor. It powered on and spun with no problems. There are some scratches on the top as shown.

145
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester - Gilroy
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester.

146
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser - Gilroy
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser. It powered as shown in the photos and went through several screens. I do not have the correct fiber for it, so I could not ...

147
Olympic Medical BILI-Lite Model 80 Examination Light - Gilroy
Olympic Medical BILI-Lite Model 80 Examination Light. It powers on as shown in the photos.

148
Innovatis Cedex Automated Cell Counter w/ Computer + Software - Gilroy
Innovatis Cedex Automated Cell Counter w/ Computer + Software. Unit has an Olympus CX41 microscope installed. Computer is running Windows NT operating system. I was able to power on this unit, and ...

149
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet - Gilroy
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet. The Cabinet comes with one movable shelf. The door opens & closes smooth & easily although it does not have an automatic door closer...

150
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W - Gilroy
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W. This unit appears to be missing the upper vent cover. I was able to power on this unit, and I was able to heat it up to about 180ºC.

151
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

152
Bede Scientific QC-2A X-Ray Diffractometer - Gilroy
Bede Scientific QC-2A X-Ray Diffractometer. I plugged in this unit, and the EDR Detector Interface powered on. I was unable to get any other response from the unit.

153
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK. No testing has been done. Requires 208Vac 3-phase power.

154
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803 - Gilroy
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803. It powered on, but was coming up with a "PERR". Not sure if it is "Prime" issue or it needs to be repaired.

155
DisTEK VIP 4400 Dissolution Vessel Washer - Gilroy
DisTEK VIP 4400 Dissolution Vessel Washer. Powered on as shown in the photos.

156
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers - Gilroy
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers. One is set up to control two Vessels (featuring one BAB40 board, and two FIB3 Boards), and the other is set up to control four...

157
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive - Gilroy
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive. The doors on both cabinets open smoothly as expected and stay open. The doors do not have springs installed to auto c...

158
Kokusai Electric VR-30B Resistivity Test System - Gilroy
Kokusai Electric VR-30B Resistivity Test System. The "controller" and "man mode" lights turn on upon powering up, but I am unable to get it to do anything else.

159
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer - Gilroy
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer. I was able to power on this unit, but it was unresponsive to button/knob manipulation.

160
Tegal Plasma Etcher System - Gilroy
Tegal Plasma Etcher System. It powers up and reaches a set point of 50°C. This piece is untested beyond that.

161
Neslab EX-251 Circulating Heated Water Bath 116003191600 - Gilroy
Neslab EX-251 Circulating Heated Water Bath 116003191600. I was able to power on this unit, and it was responsive to button presses. Unit was able to heat and circulate water as expected. I heated ...

162
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box - Gilroy
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box. It powered on as shown in the photos. The power table goes up and down when prompted. The table does not have wheels on it. There...

163
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder - Gilroy
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

164
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder - Gilroy
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

165
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7 - Gilroy
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7. It features a Bausch & Lomb StereoZoom 7 Microscope (1X-7X) with a pair of 10X W.F. Eyepieces, as shown. The system powers up,...

166
Vision Engineering Dynascope Microscope - Gilroy
Vision Engineering Dynascope Microscope. The unit includes two Bausch & Lomb Optics, one is a 0.25 N.A 10x 215mm T.L. and the other is a 0.40 N.A. 20x 215mm T.L., please look at the photos. The uni...

167
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope - Gilroy
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope. This Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope, with Nikon CF10X eyepieces & four optics, appears to be in good cosm...

168
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681.

169
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

170
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor - Gilroy
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor. I was able to power it on as shown and it appears to spin at both low and a high rate of speed. It also got to the cold setpoint a...

171
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600.

172
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

173
Plasma Technology PL80 Plasma Etcher - Gilroy
Plasma Technology PL80 Plasma Etcher.

174
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp - Gilroy
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp. It powered on as shown in the photos.

175
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly - Gilroy
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly. All of the axes appear to be manually controlled, except the main Z-Axis positioner in the mounting base, which features an O...

176
JRE Test Shielded RF Test Enclosure JRE2218 - Gilroy
JRE Test Shielded RF Test Enclosure JRE2218. This unit has one handle installed that is somewhat loose. There is also a cut in one of the side panels that was used to feed cables through.

177
Lytron Kodiak RC006G02BB3 Recirculating Chiller - Gilroy
Lytron Kodiak RC006G02BB3 Recirculating Chiller. The lower front panel has two broken mounting tabs and is held in position with tape. There is no power cord included with this Chiller. Please look...

178
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System - Gilroy
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System. The unit requires 208-230Vac 3-ph 5-wire connection that I am unable to provide.

179
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word STRYKER is Scrambled to TUR.KER.

180
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word "Stryker is scrambled to Suqxbr".

181
Stryker Vision Elect 21" HD Surgical Monitor Display - Gilroy
Stryker Vision Elect 21" HD Surgical Monitor Display.

182
Triumph Ideal 5210-95 20" Guillotine Paper Cutter - Gilroy
Triumph Ideal 5210-95 20" Guillotine Paper Cutter. The unit powers-up with 115Vac and cuts paper effortlessly as shown. The stack of paper that I cut for the photographs measured about ¾” of an inc...

183
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian - Gilroy
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian. The unit powers-up, the fluorescent lamp illuminates and the blower runs smooth & quietly. When the blower is on the Air Filter...

184
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside - Gilroy
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside.

185
Illumina Bead Array Reader 11332140 - Gilroy
Illumina Bead Array Reader 11332140. It powered on and lights came on. Missing screws on lid.

186
Illumina Bead Array Reader 149928 - Gilroy
Illumina Bead Array Reader 149928. It powered on and lights came on. Missing screws on lid.

187
Laboratory Liquid Handler Parts Repair - Gilroy
Laboratory Liquid Handler Parts Repair.

188
Beckman Avanti 30 Centrifuge 208Vac 1-Phase - Gilroy
Beckman Avanti 30 Centrifuge 208Vac 1-Phase. The unit powers-up, although I am unable to get the lid latch to release. Without a view-port in the lid I cannot tell if there is a rotor installed or ...

189
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder - Gilroy
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder

190
Ebara 50x20 Dry Vacuum Pump - Gilroy
Ebara 50x20 Dry Vacuum Pump. The J1 plug on the top of the control panel is damaged and the Emergency-Stop switch has a key broken off in it. Please look at the photos. Since the Emergency-Stop swi...

191
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC - Gilroy
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC

192
DEKA Cynosure Smartepil II Medical Laser - Gilroy
DEKA Cynosure Smartepil II Medical Laser. It powered on as shown in the photos above and moved through several screens with no problems. It is coming up with errors as shown on the screen. I do not...

193
ITT Engineered Control Valve w/ 2½" Sanitary Flange - Gilroy
ITT Engineered Control Valve w/ 2½" Sanitary Flange.

194
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange) - Gilroy
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange).

195
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor - Gilroy
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor.

196
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp - Gilroy
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp. This Lafouda Automated Magnetostriction Tester features a Newport Metric Breadboard (750mm x 900mm), an EG&G 5105 Lock-In A...

197
Becton Dickinson BBL Biological Safety Cabinet - Gilroy
Becton Dickinson BBL Biological Safety Cabinet. It powered on as shown in the photos above. There is no filter or UV light in the cabinet. When turning the blower on, an alarm sounds.

198
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor - Gilroy
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor. The unit does not power-up, although it could be as simple as rewiring it for 220Vac 3-phase input as it may be currently wired for 440Vac 3-pha...

199
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera - Gilroy
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera. I was able to power on this unit, and it was responsive to knob adjustments. The unit was able to power the transilluminator, an...

200
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf - Gilroy
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf.

201
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF - Gilroy
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF. I was able to power on this unit, and it was responsive to button presses. I was able to attempt to run a cycle, but without access to rea...

202
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331 - Gilroy
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331.This unit appears to be new in a sealed box. Packaging shows signs of shelf wear and previous shipping.

203
Ametek DR523K72 Regenerative Blower - Gilroy
Ametek DR523K72 Regenerative Blower. The unit powers-up & blows smooth & quietly. It requires 191-208 or 381-416Vac 3-Phase electrical input. There is no power cord included with this blower. This ...

204
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software - Gilroy
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software. This listing includes: Perkin Elmer Fusion A135600, Installed Plate Stacker, Dell computer running Windows 2000, Monitor, Keyboar...

205
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input - Gilroy
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input. This unit appears to be new old stock sealed in the box. Packaging shows signs of shelf wear and previous shipping. There is a stain on...

206
Shel Lab Agilent Technologies G2545A Hybridization Oven - Gilroy
Shel Lab Agilent Technologies G2545A Hybridization Oven. The unit powers-up and heated from 8.7°C up to 68°C and stabilized in about 20 minutes. The rack rotates smooth & quietly and responds to th...

207
Olympus Microscope Boomstand - Gilroy
Olympus Microscope Boomstand.

208
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, and it was responsive to button presses. The unit initially showed "Programs & setup lost-...

209
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, however the majority of the buttons on the keypad were non-responsive. I was unable to run...

210
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph - Gilroy
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph.

211
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph - Gilroy
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph. The output shaft is 5/8” inch in diameter that is keyed, the keyway key is included. Please look at the photos.

212
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser - Gilroy
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser. I was able to power on this unit, and pressing the "Origin Reversion" button caused the arm and platform to move around to the ...

213
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

214
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A. This unit has scuffs and scratches present, as well as staining and corrosion, primarily in the pump head. There is some cor...

215
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

216
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand - Gilroy
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand. There are ¼”-20 threaded holes approximately every inch.

217
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives - Gilroy
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives. The units power-up with 24Vdc that I am unable to provide therefore no testing has been performed.

218
Met Pro Duall Division CAS-24 MOD Air Handling Unit - Gilroy
Met Pro Duall Division CAS-24 MOD Air Handling Unit.

219
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. There was visible water agitation in the bath, but the rear n...

220
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. The water was circulating inside the bath, however the two ex...

221
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W - Gilroy
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W.

222
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

223
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

224
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph - Gilroy
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph. The unit powers-up and runs smooth & quietly, although this unit does not include a power cord. This is the only testing that has been performed.

225
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer - Gilroy
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer. The unit powers-up with 90Vdc which I am unable to provide, therefore no testing has been performed.

226
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller - Gilroy
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller. It powers up, and the digital display is bright and clear, and it responds to input from the controls, and it heats water succe...

227
Elgar 1001B AC Power Source w/ 400SD Oscillator - Gilroy
Elgar 1001B AC Power Source w/ 400SD Oscillator. The unit powers-up and the fans run smooth & quietly, although I am unable to get the AC Volts gauge to respond. No further testing has been done.

228
BMG Labtech Stacker III Microplate Stacker for Microplate Readers - Gilroy
BMG Labtech Stacker III Microplate Stacker for Microplate Readers. I was able to power on this unit, and the green indicator light in front blinks.

229
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair - Gilroy
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair. The unit powers-up and I am able to get the platform to move down although I am unable to get it to move in the up direction.

230
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar - Gilroy
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar.

231
Buchi B-191 Mini Spray Dryer - Gilroy
Buchi B-191 Mini Spray Dryer. The unit powers-up and the display responds to manipulation of the control panel. The peristaltic pump powers up & rotates smooth & quietly. This is the only testing t...

232
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor - Gilroy
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor. I was able to power on this unit as well as the accompanying computer. The computer is running Windows XP and appears to have the s...

233
Advanced Research Systems ARS-2HW Cryogenic Compressor - Gilroy
Advanced Research Systems ARS-2HW Cryogenic Compressor. The unit powers-up with 200-230Vac 1-Phase 60Hz input although I do not have the correct electrical receptacle to plug it into therefore no t...

234
Roth Pump Company 1SE5777DBF Pump Head - Gilroy
Roth Pump Company 1SE5777DBF Pump Head. Please note that this is just the Pump Head and does not include a motor.

235
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump - Gilroy
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump.

236
ENI ACG-10B RF Generator ACG-10B-01M11 - Gilroy
ENI ACG-10B RF Generator ACG-10B-01M11. I was able to power on this unit, and it appeared to be responsive to button presses and knob manipulation. The meter appeared to be accurate to the dial on ...

237
Garner Products CDS Series Degausser CDS-2500A - Gilroy
Garner Products CDS Series Degausser CDS-2500A. This unit does not power up.

238
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank - Gilroy
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank.

239
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead - Gilroy
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead. The unit will require hard wiring prior to powering-up, therefore no testing that has been performed. I am able to rotate the o...

240
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC - Gilroy
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC. The exhaust port appears to have been removed by a previous user. I was able to power on this oven, and it heated to a set point of 4...

241
VWR Scientific 1400E Laboratory Vacuum Oven 9100574 - Gilroy
VWR Scientific 1400E Laboratory Vacuum Oven 9100574. The oven also has corrosion and staining inside the chamber. There is also a split in the rubber seal. I was able to power on this unit, and it ...

242
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor - Gilroy
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor. Please Note: No buckets are included with the rotor. I was able to power on this unit, and it was responsive to knob adjustments. I was able to ...

243
Edwards EB3 Electron Beam Power Supply E09061000 - Gilroy
Edwards EB3 Electron Beam Power Supply E09061000.

244
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer - Gilroy
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer. The units power-up and appear to respond to the control settings. It heated from about 24°C up to about 127°C in about 10 minutes....

245
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

246
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M - Gilroy
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M. The unit powers-up & draws up to 740mmHg of vacuum as shown. The digital vacuum gauge is not included. This is the only testing that has been per...

247
Blue M Stabil-Glow Tube Furnace TF-2420C-3 - Gilroy
Blue M Stabil-Glow Tube Furnace TF-2420C-3. The inside dimensions of the furnace (over the heating coils) is approximately 2.375” inches in diameter by 24.500” inches long. Please look at the photo...

248
Mettler Toledo MultiMax Automated Reactor System - Gilroy
Mettler Toledo MultiMax Automated Reactor System. Included are the following components; One RB04-50 with a Docking Station, One Universal Control Box w/MultiMax upgrade, One Dispenser Box, One Ele...

249
Laserscope Greenlight PV Surgical Laser - Gilroy
Laserscope Greenlight PV Surgical Laser. It powered as shown in the photos and went through several self-tests. It stopped on "Problem 10". The key shown in not included, but it takes a standard 31...

250
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler - Gilroy
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler. This unit includes a Service Manual. I was able to power on this unit, but it appears to have a couple of problems. When press...

251
Baxter Scientific Products DX41 Laboratory Drying Oven - Gilroy
Baxter Scientific Products DX41 Laboratory Drying Oven. I was able to power on this unit, however after about 25 seconds the unit emits a loud beep and lights up the Alarm indicator. The oven did n...

252
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump - Gilroy
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump. I was able to power on these units. The concentrator was able to spin, and appeared to change speeds between low, medium, a...

253
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - Gilroy
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - It powered up as shown and responded correctly when buttons were pressed, however that was the extent of my testing and it is being sold as-is.

254
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60" - Gilroy
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60".

255
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module - Gilroy
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module. The unit powers-up and the shows a black line across the readout. I am unable to get the EP controller to do anything else, therefore I belie...

256
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope - Gilroy
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope. This includes the Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope, with a 99S000 Power X/Y Stage, an Oly...

257
Nikon Measurescope MM-11 Trinocular Measuring Microscope - Gilroy
Nikon Measurescope MM-11 Trinocular Measuring Microscope. The microscope is equipped with X/Y glass measuring scales, although there is only one connecting cable and it does not include a display u...

258
ENI MKS Optima Master OPT-400A DC Plasma Generator - Gilroy
ENI MKS Optima Master OPT-400A DC Plasma Generator. It powered on using a test power cord as shown in the photos. Test power cord not included.

259
Huttinger PFG2500RF RF Generator Power Supply - Gilroy
Huttinger PFG2500RF RF Generator Power Supply.

260
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

261
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor - Gilroy
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor. The unit powers-up & draws up to 710mmHg of vacuum. The digital vacuum gauge shown is not included. This is the only testing that has been performed.

262
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector - Gilroy
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector. All components but one powered on (Top Right) as shown in the photos.

263
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150 - Gilroy
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150. I was able to power on this unit, and it was responsive to button presses. Unit was able to shake as expected. I started the unit at 120RP...

264
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet - Gilroy
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet. The door closes automatically, although handle must be latched/locked by hand. This is the only testing that has been performed.

265
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240 - Gilroy
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240. I was able to power on this pump, and it ran without any immediately obvious problems. I attached a vacuum gauge and it showed the...

266
Varian 9499240 MS40+ Rotary Vane Vacuum Pump - Gilroy
Varian 9499240 MS40+ Rotary Vane Vacuum Pump. When power is applied this status lamp flashes yellow a few times then changes to flashing red although the motor does not turn on.

267
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump - Gilroy
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump. This vacuum pump does not include the required control box. Due to the lack of a control box no testing has been performed.

268
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide - Gilroy
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide.

269
Texas Instruments 3133367-1 Processor Rack Interface - Gilroy
Texas Instruments 3133367-1 Processor Rack Interface

270
Shimadzu GC-8A Gas Chromatograph HPLC - Gilroy
Shimadzu GC-8A Gas Chromatograph HPLC. I am able to power on this chromatograph. I could hear the system running and I could feel air blowing when I opened the door. The analog dials on the front p...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Surplus Equipment from an Alternative Energy Producer

Equipment Dispositions

Equipment Dispositions


Contact:
Phone: 408-402-2436
Sale Location
Fremont
, CA
Sale Dates and Times
Sale Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba Disposition Services ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.

Listing Details

1
JSM-6335F SEM / FEM Field Emmission Scanning Electron Microscope - Ft. Collins, CO

2
Fritsch Pulverisette 5 Orbital Pulverizer - Ft. Collins, CO
Fritsch Pulverisette 5 Orbital Pulverizer  - Ft. Collins, CO

3
AirGuard 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box
AirGuardrd 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box

4
Lindberg Laboratory Tube Furnace - Ft. Collins, CO

5
Brookfield 2X-HBDV-11 Cone Plate Digital Viscometer - Ft. Collins, CO

6
Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO
'Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO

7
DEK Horizon 265-HOZ Screen Printer

8
Centrotherm CT-BW H300K2S M0C4D Wet Scrubber With Spare Parts, Ft. Collins, CO

9
Neslab Coolflow CFT-75 Refrigerated Recirculator With Wheels, Ft. Collins, CO

10
Agilent / HP 4145B Semiconductor Parameter Analyzer, Ft. Collins, CO

11
Thermo Neslab RTE7 Refrigerated Recirculator, Ft. Collins, CO

12
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO

13
Lot Consisting of Qty-2 Windsor Carpet Extractors, Ft. Collins, CO
Lot Consisting of Qty-2 Windsor Carpet Extractors (1) Windsor Commadore 20 & (1) Windsor Carpet Extractor w Extension Cord, Ft. Collins, CO

14
Agilent HP 54815A Infinium Oscilloscope, Ft. Collins, CO

15
Karl Muller ElektrorHRD 1/5 High Velocity Blower, Ft. Collins, CO

16
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO

17
Hewlett Packard 54815A Digitizing Oscilloscope

18
Haskris R75 Heat Exchanger Recirculating Chiller Bath, Ft. Collins, CO

19
Yeong Shin Digital Circulating Heated Water Bath, Ft. Collins, CO

20
HP 8082A Pulse Generator, Ft. Collins, CO

21
Faxitron CS-100AC Circuit Scan Industrial X-Ray Inspection System, Ft. Collins, CO

22
Perkin Elmer 4400 Sputtering / Evaporator System

93
Sony STR-DH190 Stereo Receiver - Gilroy
Sony STR-DH190 Stereo Receiver. Open box, appears to be in excellent condition. Powers on as shown. Comes with manual, remote, and power cord as shown. Proceeds from this item benefit a local non-p...

94
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable - Gilroy
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable (USB and Analog). Open box but it appears to still be in the original wrapping. Proceeds from this item benefit a local non-pr...

95
Google Chromecast Ultra - Gilroy
Google Chromecast Ultra. Used open box item. Comes with Chromecast unit and power supply. Proceeds from this item benefit a local non-profit organization.

96
Google Home Mini. Factory sealed box - Gilroy
Google Home Mini. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

97
Arris SB6141 SURFboard Cable Modem - Gilroy
Arris SB6141 SURFboard Cable Modem. Open box, appears to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

98
Motorola MB7621 24x8 Cable Modem, Factory sealed box - Gilroy
Motorola MB7621 24x8 Cable Modem. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

99
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo - Gilroy
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo. Open box, appears to be in excellent condition. Powers on as shown. Proceeds from this item benefit a local non-profit organization.

100
Pioneer SP-BS22-LR Bookshelf Speakers - Gilroy
Pioneer SP-BS22-LR Bookshelf Speakers Andrew Jones Designed. Open box, appear to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

101
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1 - Gilroy
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1. It powers up and the inside gets cold. The handle moves smoothly and I am able to get response from the buttons as well.

102
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

103
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler - Gilroy
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler. I am unable to power on or test the spectrometer due to lack of appropriate power receptacle to plug the unit into. The autosample...

104
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder - Gilroy
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder w...

105
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B) - Gilroy
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B). It will include a microscope and workholder. We do not currently have the other head/clamps for it.

106
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder - Gilroy
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperatu...

107
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder - Gilroy
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder. It comes with everything shown, including a model 1600 Ultrasonic Generator, and a B&L SZ4 StereoZoom 4 Microscope (0.7X to ...

108
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller - Gilroy
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Work...

109
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads - Gilroy
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads. The unit powers-up as shown, although I simply do not have the tools or training to formally test this system, therefore no o...

110
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder - Gilroy
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder.It currently has a 22gm Pull Test Load Cell installed.

111
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table - Gilroy
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table. The unit powers-up and heats to the preset temperature. Once it has stabilized at the set temperature, you can initiate the cycle with the ...

112
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

113
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

114
Kadel Engineering Liquid Nitrogen Tank - Gilroy
Kadel Engineering Liquid Nitrogen Tank.

115
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3 - Gilroy
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3. It powered on as shown in the photos above, but this is all it did. I do not know how to move about the various screens or test...

116
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly - Gilroy
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly. I tried powering-up the pumps individually, the QMB250 Booster Pump powers-up although just the motor runs, the impellers do not rotate. The Q...

117
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B - Gilroy
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B. It powers up, and recirculates and heats and cools water successfully, and I was able to adjust the set point. The locking lever on t...

118
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900 - Gilroy
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900. It powered on with no problems and I was able to move about in several screens.

119
Bio-Rad Hydro-Tech Vacuum Pump - Gilroy
Bio-Rad Hydro-Tech Vacuum Pump. It powered on as I could hear it running.

120
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

121
Technics Plasma Processor 200E P.P.-200E - Gilroy
Technics Plasma Processor 200E P.P.-200E. This unit requires 220 VAC, 10A, 50Hz power for operation.

122
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H - Gilroy
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H. I noticed some cables inside have been cut so I did not attempt to power it on.

123
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor - Gilroy
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor.

124
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange - Gilroy
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange.

125
Flow Sciences FS2350 Vented Balance Safety Enclosure - Gilroy
Flow Sciences FS2350 Vented Balance Safety Enclosure. This listing also includes an FS1645 alarm kit.

126
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges - Gilroy
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges. I was able to power on this unit. I had to open and shut the tray several times to be able to run a degaussing cycle, and th...

127
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump - Gilroy
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump.

128
Grundfos BD050I3 85Z02410 Vertical Multistage Pump - Gilroy
Grundfos BD050I3 85Z02410 Vertical Multistage Pump.

129
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump.

130
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump.

131
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump - Gilroy
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump.

132
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump

133
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing - Gilroy
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing. The door on this unit opens and closes smoothly, and is self closing. Unit includes one shelf and two keys.

134
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet - Gilroy
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet.

135
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max - Gilroy
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max. I was able to power on this unit, and it was able to heat up to approximately 170ºC during my testing, over the course of approximately an hour. The...

136
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves - Gilroy
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves. The unit powers-up, although without a water input/output connection the unit has a loud audible alarm, therefore no testing ...

137
VWR Scientific Model 1265PC Heated Circulating Water Bath - Gilroy
VWR Scientific Model 1265PC Heated Circulating Water Bath. I was able to power on this unit, and it circulates the water as well as heating as expected. I was able to heat water to approximately 40...

138
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity - Gilroy
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity.

139
Mactronix Eureka BBS-400 Wafer Transfer Station - Gilroy
Mactronix Eureka BBS-400 Wafer Transfer Station. The unit powers-up pneumatically & the transfer arm moves up/down smooth & quietly, although this is the only testing that has been performed.

140
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A - Gilroy
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A. The 16700A has three Plug-Ins installed: 16534A 2GSa/s Oscilloscope, 16517A Master Plug-In (4GHz Timing, 1GHz Synchronous) w...

141
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer - Gilroy
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer. This Gaertner Scientific L117 Ellipsometer features an Imaging Source DBK31BU03 Video Camera, and a Computer with Mouse (a Monitor ...

142
VWR SCBMF-2020 Lab Freezer -20F -12C - Gilroy
VWR SCBMF-2020 Lab Freezer -20F -12C. It powered on and got down to set point fairly quickly before I turned it off.

143
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C - Gilroy
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C. It powers up, and recirculates and chills water successfully. When set to the minimum set point of 4.0°C, the temperature f...

144
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor - Gilroy
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor. It powered on and spun with no problems. There are some scratches on the top as shown.

145
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester - Gilroy
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester.

146
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser - Gilroy
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser. It powered as shown in the photos and went through several screens. I do not have the correct fiber for it, so I could not ...

147
Olympic Medical BILI-Lite Model 80 Examination Light - Gilroy
Olympic Medical BILI-Lite Model 80 Examination Light. It powers on as shown in the photos.

148
Innovatis Cedex Automated Cell Counter w/ Computer + Software - Gilroy
Innovatis Cedex Automated Cell Counter w/ Computer + Software. Unit has an Olympus CX41 microscope installed. Computer is running Windows NT operating system. I was able to power on this unit, and ...

149
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet - Gilroy
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet. The Cabinet comes with one movable shelf. The door opens & closes smooth & easily although it does not have an automatic door closer...

150
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W - Gilroy
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W. This unit appears to be missing the upper vent cover. I was able to power on this unit, and I was able to heat it up to about 180ºC.

151
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

152
Bede Scientific QC-2A X-Ray Diffractometer - Gilroy
Bede Scientific QC-2A X-Ray Diffractometer. I plugged in this unit, and the EDR Detector Interface powered on. I was unable to get any other response from the unit.

153
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK. No testing has been done. Requires 208Vac 3-phase power.

154
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803 - Gilroy
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803. It powered on, but was coming up with a "PERR". Not sure if it is "Prime" issue or it needs to be repaired.

155
DisTEK VIP 4400 Dissolution Vessel Washer - Gilroy
DisTEK VIP 4400 Dissolution Vessel Washer. Powered on as shown in the photos.

156
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers - Gilroy
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers. One is set up to control two Vessels (featuring one BAB40 board, and two FIB3 Boards), and the other is set up to control four...

157
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive - Gilroy
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive. The doors on both cabinets open smoothly as expected and stay open. The doors do not have springs installed to auto c...

158
Kokusai Electric VR-30B Resistivity Test System - Gilroy
Kokusai Electric VR-30B Resistivity Test System. The "controller" and "man mode" lights turn on upon powering up, but I am unable to get it to do anything else.

159
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer - Gilroy
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer. I was able to power on this unit, but it was unresponsive to button/knob manipulation.

160
Tegal Plasma Etcher System - Gilroy
Tegal Plasma Etcher System. It powers up and reaches a set point of 50°C. This piece is untested beyond that.

161
Neslab EX-251 Circulating Heated Water Bath 116003191600 - Gilroy
Neslab EX-251 Circulating Heated Water Bath 116003191600. I was able to power on this unit, and it was responsive to button presses. Unit was able to heat and circulate water as expected. I heated ...

162
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box - Gilroy
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box. It powered on as shown in the photos. The power table goes up and down when prompted. The table does not have wheels on it. There...

163
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder - Gilroy
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

164
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder - Gilroy
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

165
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7 - Gilroy
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7. It features a Bausch & Lomb StereoZoom 7 Microscope (1X-7X) with a pair of 10X W.F. Eyepieces, as shown. The system powers up,...

166
Vision Engineering Dynascope Microscope - Gilroy
Vision Engineering Dynascope Microscope. The unit includes two Bausch & Lomb Optics, one is a 0.25 N.A 10x 215mm T.L. and the other is a 0.40 N.A. 20x 215mm T.L., please look at the photos. The uni...

167
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope - Gilroy
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope. This Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope, with Nikon CF10X eyepieces & four optics, appears to be in good cosm...

168
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681.

169
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

170
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor - Gilroy
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor. I was able to power it on as shown and it appears to spin at both low and a high rate of speed. It also got to the cold setpoint a...

171
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600.

172
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

173
Plasma Technology PL80 Plasma Etcher - Gilroy
Plasma Technology PL80 Plasma Etcher.

174
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp - Gilroy
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp. It powered on as shown in the photos.

175
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly - Gilroy
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly. All of the axes appear to be manually controlled, except the main Z-Axis positioner in the mounting base, which features an O...

176
JRE Test Shielded RF Test Enclosure JRE2218 - Gilroy
JRE Test Shielded RF Test Enclosure JRE2218. This unit has one handle installed that is somewhat loose. There is also a cut in one of the side panels that was used to feed cables through.

177
Lytron Kodiak RC006G02BB3 Recirculating Chiller - Gilroy
Lytron Kodiak RC006G02BB3 Recirculating Chiller. The lower front panel has two broken mounting tabs and is held in position with tape. There is no power cord included with this Chiller. Please look...

178
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System - Gilroy
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System. The unit requires 208-230Vac 3-ph 5-wire connection that I am unable to provide.

179
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word STRYKER is Scrambled to TUR.KER.

180
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word "Stryker is scrambled to Suqxbr".

181
Stryker Vision Elect 21" HD Surgical Monitor Display - Gilroy
Stryker Vision Elect 21" HD Surgical Monitor Display.

182
Triumph Ideal 5210-95 20" Guillotine Paper Cutter - Gilroy
Triumph Ideal 5210-95 20" Guillotine Paper Cutter. The unit powers-up with 115Vac and cuts paper effortlessly as shown. The stack of paper that I cut for the photographs measured about ¾” of an inc...

183
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian - Gilroy
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian. The unit powers-up, the fluorescent lamp illuminates and the blower runs smooth & quietly. When the blower is on the Air Filter...

184
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside - Gilroy
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside.

185
Illumina Bead Array Reader 11332140 - Gilroy
Illumina Bead Array Reader 11332140. It powered on and lights came on. Missing screws on lid.

186
Illumina Bead Array Reader 149928 - Gilroy
Illumina Bead Array Reader 149928. It powered on and lights came on. Missing screws on lid.

187
Laboratory Liquid Handler Parts Repair - Gilroy
Laboratory Liquid Handler Parts Repair.

188
Beckman Avanti 30 Centrifuge 208Vac 1-Phase - Gilroy
Beckman Avanti 30 Centrifuge 208Vac 1-Phase. The unit powers-up, although I am unable to get the lid latch to release. Without a view-port in the lid I cannot tell if there is a rotor installed or ...

189
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder - Gilroy
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder

190
Ebara 50x20 Dry Vacuum Pump - Gilroy
Ebara 50x20 Dry Vacuum Pump. The J1 plug on the top of the control panel is damaged and the Emergency-Stop switch has a key broken off in it. Please look at the photos. Since the Emergency-Stop swi...

191
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC - Gilroy
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC

192
DEKA Cynosure Smartepil II Medical Laser - Gilroy
DEKA Cynosure Smartepil II Medical Laser. It powered on as shown in the photos above and moved through several screens with no problems. It is coming up with errors as shown on the screen. I do not...

193
ITT Engineered Control Valve w/ 2½" Sanitary Flange - Gilroy
ITT Engineered Control Valve w/ 2½" Sanitary Flange.

194
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange) - Gilroy
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange).

195
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor - Gilroy
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor.

196
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp - Gilroy
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp. This Lafouda Automated Magnetostriction Tester features a Newport Metric Breadboard (750mm x 900mm), an EG&G 5105 Lock-In A...

197
Becton Dickinson BBL Biological Safety Cabinet - Gilroy
Becton Dickinson BBL Biological Safety Cabinet. It powered on as shown in the photos above. There is no filter or UV light in the cabinet. When turning the blower on, an alarm sounds.

198
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor - Gilroy
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor. The unit does not power-up, although it could be as simple as rewiring it for 220Vac 3-phase input as it may be currently wired for 440Vac 3-pha...

199
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera - Gilroy
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera. I was able to power on this unit, and it was responsive to knob adjustments. The unit was able to power the transilluminator, an...

200
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf - Gilroy
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf.

201
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF - Gilroy
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF. I was able to power on this unit, and it was responsive to button presses. I was able to attempt to run a cycle, but without access to rea...

202
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331 - Gilroy
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331.This unit appears to be new in a sealed box. Packaging shows signs of shelf wear and previous shipping.

203
Ametek DR523K72 Regenerative Blower - Gilroy
Ametek DR523K72 Regenerative Blower. The unit powers-up & blows smooth & quietly. It requires 191-208 or 381-416Vac 3-Phase electrical input. There is no power cord included with this blower. This ...

204
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software - Gilroy
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software. This listing includes: Perkin Elmer Fusion A135600, Installed Plate Stacker, Dell computer running Windows 2000, Monitor, Keyboar...

205
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input - Gilroy
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input. This unit appears to be new old stock sealed in the box. Packaging shows signs of shelf wear and previous shipping. There is a stain on...

206
Shel Lab Agilent Technologies G2545A Hybridization Oven - Gilroy
Shel Lab Agilent Technologies G2545A Hybridization Oven. The unit powers-up and heated from 8.7°C up to 68°C and stabilized in about 20 minutes. The rack rotates smooth & quietly and responds to th...

207
Olympus Microscope Boomstand - Gilroy
Olympus Microscope Boomstand.

208
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, and it was responsive to button presses. The unit initially showed "Programs & setup lost-...

209
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, however the majority of the buttons on the keypad were non-responsive. I was unable to run...

210
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph - Gilroy
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph.

211
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph - Gilroy
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph. The output shaft is 5/8” inch in diameter that is keyed, the keyway key is included. Please look at the photos.

212
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser - Gilroy
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser. I was able to power on this unit, and pressing the "Origin Reversion" button caused the arm and platform to move around to the ...

213
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

214
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A. This unit has scuffs and scratches present, as well as staining and corrosion, primarily in the pump head. There is some cor...

215
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

216
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand - Gilroy
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand. There are ¼”-20 threaded holes approximately every inch.

217
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives - Gilroy
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives. The units power-up with 24Vdc that I am unable to provide therefore no testing has been performed.

218
Met Pro Duall Division CAS-24 MOD Air Handling Unit - Gilroy
Met Pro Duall Division CAS-24 MOD Air Handling Unit.

219
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. There was visible water agitation in the bath, but the rear n...

220
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. The water was circulating inside the bath, however the two ex...

221
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W - Gilroy
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W.

222
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

223
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

224
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph - Gilroy
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph. The unit powers-up and runs smooth & quietly, although this unit does not include a power cord. This is the only testing that has been performed.

225
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer - Gilroy
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer. The unit powers-up with 90Vdc which I am unable to provide, therefore no testing has been performed.

226
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller - Gilroy
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller. It powers up, and the digital display is bright and clear, and it responds to input from the controls, and it heats water succe...

227
Elgar 1001B AC Power Source w/ 400SD Oscillator - Gilroy
Elgar 1001B AC Power Source w/ 400SD Oscillator. The unit powers-up and the fans run smooth & quietly, although I am unable to get the AC Volts gauge to respond. No further testing has been done.

228
BMG Labtech Stacker III Microplate Stacker for Microplate Readers - Gilroy
BMG Labtech Stacker III Microplate Stacker for Microplate Readers. I was able to power on this unit, and the green indicator light in front blinks.

229
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair - Gilroy
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair. The unit powers-up and I am able to get the platform to move down although I am unable to get it to move in the up direction.

230
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar - Gilroy
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar.

231
Buchi B-191 Mini Spray Dryer - Gilroy
Buchi B-191 Mini Spray Dryer. The unit powers-up and the display responds to manipulation of the control panel. The peristaltic pump powers up & rotates smooth & quietly. This is the only testing t...

232
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor - Gilroy
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor. I was able to power on this unit as well as the accompanying computer. The computer is running Windows XP and appears to have the s...

233
Advanced Research Systems ARS-2HW Cryogenic Compressor - Gilroy
Advanced Research Systems ARS-2HW Cryogenic Compressor. The unit powers-up with 200-230Vac 1-Phase 60Hz input although I do not have the correct electrical receptacle to plug it into therefore no t...

234
Roth Pump Company 1SE5777DBF Pump Head - Gilroy
Roth Pump Company 1SE5777DBF Pump Head. Please note that this is just the Pump Head and does not include a motor.

235
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump - Gilroy
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump.

236
ENI ACG-10B RF Generator ACG-10B-01M11 - Gilroy
ENI ACG-10B RF Generator ACG-10B-01M11. I was able to power on this unit, and it appeared to be responsive to button presses and knob manipulation. The meter appeared to be accurate to the dial on ...

237
Garner Products CDS Series Degausser CDS-2500A - Gilroy
Garner Products CDS Series Degausser CDS-2500A. This unit does not power up.

238
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank - Gilroy
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank.

239
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead - Gilroy
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead. The unit will require hard wiring prior to powering-up, therefore no testing that has been performed. I am able to rotate the o...

240
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC - Gilroy
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC. The exhaust port appears to have been removed by a previous user. I was able to power on this oven, and it heated to a set point of 4...

241
VWR Scientific 1400E Laboratory Vacuum Oven 9100574 - Gilroy
VWR Scientific 1400E Laboratory Vacuum Oven 9100574. The oven also has corrosion and staining inside the chamber. There is also a split in the rubber seal. I was able to power on this unit, and it ...

242
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor - Gilroy
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor. Please Note: No buckets are included with the rotor. I was able to power on this unit, and it was responsive to knob adjustments. I was able to ...

243
Edwards EB3 Electron Beam Power Supply E09061000 - Gilroy
Edwards EB3 Electron Beam Power Supply E09061000.

244
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer - Gilroy
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer. The units power-up and appear to respond to the control settings. It heated from about 24°C up to about 127°C in about 10 minutes....

245
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

246
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M - Gilroy
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M. The unit powers-up & draws up to 740mmHg of vacuum as shown. The digital vacuum gauge is not included. This is the only testing that has been per...

247
Blue M Stabil-Glow Tube Furnace TF-2420C-3 - Gilroy
Blue M Stabil-Glow Tube Furnace TF-2420C-3. The inside dimensions of the furnace (over the heating coils) is approximately 2.375” inches in diameter by 24.500” inches long. Please look at the photo...

248
Mettler Toledo MultiMax Automated Reactor System - Gilroy
Mettler Toledo MultiMax Automated Reactor System. Included are the following components; One RB04-50 with a Docking Station, One Universal Control Box w/MultiMax upgrade, One Dispenser Box, One Ele...

249
Laserscope Greenlight PV Surgical Laser - Gilroy
Laserscope Greenlight PV Surgical Laser. It powered as shown in the photos and went through several self-tests. It stopped on "Problem 10". The key shown in not included, but it takes a standard 31...

250
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler - Gilroy
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler. This unit includes a Service Manual. I was able to power on this unit, but it appears to have a couple of problems. When press...

251
Baxter Scientific Products DX41 Laboratory Drying Oven - Gilroy
Baxter Scientific Products DX41 Laboratory Drying Oven. I was able to power on this unit, however after about 25 seconds the unit emits a loud beep and lights up the Alarm indicator. The oven did n...

252
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump - Gilroy
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump. I was able to power on these units. The concentrator was able to spin, and appeared to change speeds between low, medium, a...

253
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - Gilroy
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - It powered up as shown and responded correctly when buttons were pressed, however that was the extent of my testing and it is being sold as-is.

254
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60" - Gilroy
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60".

255
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module - Gilroy
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module. The unit powers-up and the shows a black line across the readout. I am unable to get the EP controller to do anything else, therefore I belie...

256
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope - Gilroy
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope. This includes the Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope, with a 99S000 Power X/Y Stage, an Oly...

257
Nikon Measurescope MM-11 Trinocular Measuring Microscope - Gilroy
Nikon Measurescope MM-11 Trinocular Measuring Microscope. The microscope is equipped with X/Y glass measuring scales, although there is only one connecting cable and it does not include a display u...

258
ENI MKS Optima Master OPT-400A DC Plasma Generator - Gilroy
ENI MKS Optima Master OPT-400A DC Plasma Generator. It powered on using a test power cord as shown in the photos. Test power cord not included.

259
Huttinger PFG2500RF RF Generator Power Supply - Gilroy
Huttinger PFG2500RF RF Generator Power Supply.

260
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

261
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor - Gilroy
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor. The unit powers-up & draws up to 710mmHg of vacuum. The digital vacuum gauge shown is not included. This is the only testing that has been performed.

262
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector - Gilroy
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector. All components but one powered on (Top Right) as shown in the photos.

263
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150 - Gilroy
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150. I was able to power on this unit, and it was responsive to button presses. Unit was able to shake as expected. I started the unit at 120RP...

264
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet - Gilroy
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet. The door closes automatically, although handle must be latched/locked by hand. This is the only testing that has been performed.

265
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240 - Gilroy
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240. I was able to power on this pump, and it ran without any immediately obvious problems. I attached a vacuum gauge and it showed the...

266
Varian 9499240 MS40+ Rotary Vane Vacuum Pump - Gilroy
Varian 9499240 MS40+ Rotary Vane Vacuum Pump. When power is applied this status lamp flashes yellow a few times then changes to flashing red although the motor does not turn on.

267
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump - Gilroy
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump. This vacuum pump does not include the required control box. Due to the lack of a control box no testing has been performed.

268
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide - Gilroy
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide.

269
Texas Instruments 3133367-1 Processor Rack Interface - Gilroy
Texas Instruments 3133367-1 Processor Rack Interface

270
Shimadzu GC-8A Gas Chromatograph HPLC - Gilroy
Shimadzu GC-8A Gas Chromatograph HPLC. I am able to power on this chromatograph. I could hear the system running and I could feel air blowing when I opened the door. The analog dials on the front p...

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Surplus Equipment from an Alternative Energy Producer
 Online Only Auction
Sale Date(s)
Bidding Starts: Wednesday May 22 , 08:00 AM
Bidding Ends: Thursday May 23 , 04:00 PM
Sale Location

, CA
Listing Terms and Conditions

TERMS AND CONDITIONS

 

  1. Participation in Auction.  The services provided by Equipment Dispositions, Inc. dba Disposition Services ("Auctioneer") with a known address of 465 Mission Drive, Pleasanton, CA 94566 are governed by these Terms and Conditions.  By participating in this Auction, you consent to be bound by these Terms and Conditions as well as by any additional terms that may be imposed by the Seller or announced at the Auction.  
  2. Mandatory Online Registration.  All potential bidders must register online at www.dispositionservices.com before the Auction.  Auctioneer may, in its sole discretion, deny registration to any person or entity.
  3. Auctioneer has Sole Authority over Conduct of Auction.  The Auction will be conducted in accordance with California Commercial Code 2328 and California Civil Code Sections 2362 and 2363 along with these Terms and Conditions.  Auctioneer will have sole and complete authority over the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and any decision of Auctioneer with respect to the conduct of the Auction and the acceptance or rejection of any bid shall be final.
  4. Assets sold to Highest Bidder.  All assets in the Auction shall be sold to the highest bidder; provided, however, that some assets may be auctioned with minimum reserve prices and/or subject to Seller's right of confirmation.  All items will remain in the possession of Auctioneer until full payment has been received from the Purchaser.
  5. Auctioneer's Right to Reject or Accept Bids.  Auctioneer reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that Auctioneer believes was made illegally or in bad faith.  Further, Auctioneer, and/or its affiliates or subsidiaries, may bid at the Auction either for its own account or on behalf of a third party.  In the event of a dispute among bidders, Auctioneer may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute.  All sales are final.  No returns or refunds will be permitted, unless authorized by the Seller in writing.
  6. Auctioneer's Records Control.  In the event of any dispute concerning the winning bid price for an asset, the record kept by Auctioneer shall control.
  7. No Warranty by Auctioneer or Seller.  Bidders shall examine or inspect items prior to the auction.  ALL ITEMS ARE SOLD "AS IS, WHERE IS" AND WITH ALL FAULTS.  NEITHER AUCTIONEER NOR SELLER MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET.  AUCTIONEER AND SELLER EXPRESSLY DISCLAIM ANY WARRANTY OF TITLE, MERCHANTIABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Auctioneer will announce if any item carries a manufacturer's warranty at the time the item is offered for sale.  Assets are intended to be sold without software, if any is applicable.  In the event that a Seller's software is included in an asset sale, notwithstanding the disclaimers set forth above, Auctioneer makes no representations or warranties regarding the Purchaser's right to use such software, as to the performance of the software, its non-infringement or otherwise.  In such circumstances, Auctioneer recommends that Purchaser contact the software manufacturer directly to resolve any such issues.  Auctioneer relies on information about assets in the Auction provided by the Seller.  Auctioneer undertakes no investigation of that information, and makes no representation or warranty concerning the truth or completeness of that information.  Photographs are provided solely for the bidder's convenience and shall not be construed to create representations or warranties of any kind pertaining to the assets.  Purchaser acknowledges that it has had the opportunity to inspect all assets prior to tendering its bid and waives any and all claims against Auctioneer and/or Seller relating to asset photographs or descriptions.
  8. Auctioneer's Collection of Premium in addition to Purchase Price.  Auctioneer shall charge and collect from each successful bidder a 18% Purchaser's premium for each sale at the Auction.
  9. Applicable Taxes.  Collection of applicable taxes will be in accordance with the laws of the State where the purchased asset is located.
  10. Payment of Deposit.  Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid.  If a bidder fails to make a timely deposit, Auctioneer and the Seller may resell the items in question without notice. 
  11. Payment of Full Purchase Price.  Full payment of the purchase price is due at the earlier of (i) 48 hours after the bidder has received an invoice, or (ii) the close of business on the third (3rd) business day after the Auction.  Without limiting the foregoing, full payment of the balance of the purchase price is due prior to removal of any purchased assets.  
  12. Failure to Pay Entire Purchase Price.  In the event that a bidder fails to pay the entire purchase price (in addition to the Purchaser's premium and any applicable tax) within the time specified by Auctioneer or otherwise fails to comply with these Terms and Conditions, Auctioneer and the Seller will retain any deposit as liquidated damages without notice.  Auctioneer and the Seller reserve the right to resell such items without notice, and the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling such assets.  In the event of such resale, the defaulting Purchaser shall be liable to Auctioneer and Seller for any resulting deficiency, including costs incurred in storing and reselling the assets in question.
  13. Acceptable Methods of Payment.  Auctioneer accepts the following methods of payment: cash, cashier's check, and wire transfer made payable to "Disposition Services".  Auctioneer will also accept a check drawn on a company account if it is accompanied by a letter from the company's bank guaranteeing payment in full, without condition and upon demand.
  14. Warranty by Bidder.  By participating in an Auction, each bidder represents, warrants and covenants that (i) it shall not misrepresent its ability to close the transaction pursuant to the terms and conditions of sale, (ii) it has the capacity to close the transaction, (iii) it has actual authority to enter a bid, and to enter into an agreement to purchase the item, and (iv) any bid it makes on an item constitutes an irrevocable offer to buy the item for the full amount of the bid.
  15. Assets for Sale by Piece or Lot.  Auctioneer may, in its discretion, offer the assets for sale by the piece or by the lot.  In addition, Auctioneer may augment this auction with assets from various sellers.  These assets may be interspersed throughout the Auction. The Seller has the right to remove assets from the Auction either before or after bidding has completed.  In the event of a removal after bidding has been completed, the purchaser's sole remedy shall be the refund of any purchase price actually paid.
  16. Additions or Deletions to and from Catalog.  Auctioneer will announce any additions to or deletions from the catalog on the day of the Auction.  Auctioneer and the Seller assume no responsibility for, and make no representations or warranties concerning, descriptions of assets contained in marketing materials for the Auction.  It is the bidder's obligation to verify such descriptions prior to the Auction.
  17. Limitation of Liability by Auctioneer or Seller.  Neither Auctioneer nor Seller shall be liable for any damages of any type or nature (whether in contract, tort or otherwise) sustained or claimed by any bidder or any other person or entity in connection with the Auction.  Without limiting the foregoing, in no event shall Auctioneer's liability to any bidder for any act or omission occurring in connection with the Auction exceed the amount that such bidder has actually paid to Auctioneer as a deposit or as payment for a purchased item.
  18. Removal and Shipment of Purchased Items by Purchaser. Auctioneer will announce the removal, or check-out, period on the day of the Auction.  Auctioneer shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines.  It is the purchaser's sole responsibility to arrange and pay for the removal and shipment of purchased items.
  19. Purchaser's Responsibility to Insure Agents Performing Removal.  It is the Purchaser's responsibility to provide and/or insure his, her, or its agent(s) performing removals on their behalf provide, upon demand, evidence of the following insurance policies with reliable insurance companies, and in the following amounts: $2,000,000 combined single limit, $1,000,000 property damage and $1,000,000 comprehensive general liability with contractual liability in the case of all triggers; and $500,000 cargo and $1,000,000 comprehensive general liability in the case of carriers; and such other insurance as may be required by any governmental authority, including workers' compensation insurance.  Removal shall be conducted responsibly and with due care from the Seller's premises.  The Purchaser shall restore and repair all real and personal property that is altered or damaged as a result of the removal of purchased items.  If the Purchaser does not remove an item within the announced check-out period, Auctioneer and the Seller may, in their sole discretion, deem the item to have been abandoned by the Purchaser and the Purchaser will have no further rights with respect to the item.  Notwithstanding the foregoing, Auctioneer and the Seller reserve the right to charge the Purchaser for the costs of storage beyond the check-out period.
  20. Dangerous Materials at Auction Site.  Bidders acknowledge that an Auction site is a potentially dangerous place.  Flammable, noxious, corrosive and pressurized substances may be present.  Heavy equipment may be operated, and electrical circuits may be live.  Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises.  Bidders shall so advise their agents and employees.  No person shall have any claim against Auctioneer, the Seller or their respective agents or employees for any injuries sustained or for damages to or loss of property that may occur at the auction site.
  21. Purchaser's Duty to Indemnify Auctioneer.  It is the purchaser's sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain "hazardous substances," as that term is defined under federal, state or local environment laws and regulations.  Auctioneer has no duty to remove any hazardous substances that are contained in or are a part of any item.  Purchasers agree to defend (by counsel satisfactory to Auctioneer) and indemnify Auctioneer and hold Auctioneer harmless from and against any claim, demand, cause of action, liability or expense (including attorneys' fees and costs) asserted against or incurred by Auctioneer in connection with the sale, removal, shipment or use of any purchased items.
  22. Purchaser's Agreement to Comply with US Export Control and Related Laws.  Purchaser agrees to comply with all United States export control and related laws, and acknowledge that Auctioneer is not the exporter of any purchased item.  Certain items offered for sale at the auction may constitute "Restricted Technology."  Under federal law, such items may not be shipped outside of the United States.  Auctioneer makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology.  Seller reserves the right to cancel any sale at any time in the event it determines, in its sole discretion that the sale does or may violate applicable United States export control or similar laws.
  23. Binding Arbitration.  Any controversy between the Auctioneer and Purchaser arising out of or related to these Terms and Conditions shall be resolved by binding arbitration, on the written request of one party served on the other.  All parties shall agree to the selection and authority of an arbitrator within 30 days of dispute.  The binding arbitration shall take place in Santa Clara County and will comply with the Rules of Commercial Arbitration, then in effect, of the American Arbitration Association ("AAA"), and judgment upon the award may be entered in any Court having jurisdiction thereof.  It is further agreed that the arbitrators may, in their sole discretion, award attorneys' fees to the prevailing party. 
  24. Entire Agreement.  These Terms and Conditions contain the entire agreement between Auctioneer and Purchaser relating to the rights granted and obligations assumed hereunder.  Any oral representations or modifications concerning this Agreement will be of no force or effect excepting a subsequent modification in writing, signed by the party to be charged. 
  25. Partial Invalidity.  If any part of these Terms and Conditions is declared invalid for any reason, the remainder of this agreement shall be unaffected.  The other parts of these Terms and Conditions shall remain in effect as if the agreement never had the invalid part.  The parties declare that they intend and desire that the remaining parts of the agreement continue to be effective without any part or parts that have been declared invalid. 
  26. Amendments and Waivers.  Any term or provision of these Terms and Conditions may be amended and the observance of any term set forth hereunder may be waived (either generally or in a particular instance and either retroactively or prospectively) only by a writing signed by the party to be bound thereby.  The waiver by a party of any breach of this Terms and Conditions will not be deemed to constitute a waiver of any other default or succeeding breach or default.
  27. Governing Law.  These Terms and Conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal laws of the State of California, without regard to conflict of laws provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of California located in Santa Clara County.
  28. California Civil Code Section 1654 Waiver.  The determination of the terms of, and the drafting of these Terms and Conditions have been by mutual agreement after negotiation with, consideration by and participation of all parties.  The presumption found in Civil Code Section 1654, that uncertainties in a contract are interpreted against the party causing an uncertainty to exist, is hereby waived by all parties under these Terms and Conditions.


1
JSM-6335F SEM / FEM Field Emmission Scanning Electron Microscope - Ft. Collins, CO

2
Fritsch Pulverisette 5 Orbital Pulverizer - Ft. Collins, CO
Fritsch Pulverisette 5 Orbital Pulverizer  - Ft. Collins, CO

3
AirGuard 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box
AirGuardrd 900123 Fume Wet Scrubber With AirGuard UCB-N201 Control Box

4
Lindberg Laboratory Tube Furnace - Ft. Collins, CO

5
Brookfield 2X-HBDV-11 Cone Plate Digital Viscometer - Ft. Collins, CO

6
Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO
'Carl Zeiss CLSM EMMI Confocal Laser Scan Microscope - Ft. Collins, CO

7
DEK Horizon 265-HOZ Screen Printer

8
Centrotherm CT-BW H300K2S M0C4D Wet Scrubber With Spare Parts, Ft. Collins, CO

9
Neslab Coolflow CFT-75 Refrigerated Recirculator With Wheels, Ft. Collins, CO

10
Agilent / HP 4145B Semiconductor Parameter Analyzer, Ft. Collins, CO

11
Thermo Neslab RTE7 Refrigerated Recirculator, Ft. Collins, CO

12
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO
Hommel T20 Surface Measurement Tester & Evaluation Instrument, Ft. Collins, CO

13
Lot Consisting of Qty-2 Windsor Carpet Extractors, Ft. Collins, CO
Lot Consisting of Qty-2 Windsor Carpet Extractors (1) Windsor Commadore 20 & (1) Windsor Carpet Extractor w Extension Cord, Ft. Collins, CO

14
Agilent HP 54815A Infinium Oscilloscope, Ft. Collins, CO

15
Karl Muller ElektrorHRD 1/5 High Velocity Blower, Ft. Collins, CO

16
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO
Nalgene 10 Liter HDPE Dewar Flask & Cover For Liquid Nitrogen, Ft. Collins, CO

17
Hewlett Packard 54815A Digitizing Oscilloscope

18
Haskris R75 Heat Exchanger Recirculating Chiller Bath, Ft. Collins, CO

19
Yeong Shin Digital Circulating Heated Water Bath, Ft. Collins, CO

20
HP 8082A Pulse Generator, Ft. Collins, CO

21
Faxitron CS-100AC Circuit Scan Industrial X-Ray Inspection System, Ft. Collins, CO

22
Perkin Elmer 4400 Sputtering / Evaporator System

93
Sony STR-DH190 Stereo Receiver - Gilroy
Sony STR-DH190 Stereo Receiver. Open box, appears to be in excellent condition. Powers on as shown. Comes with manual, remote, and power cord as shown. Proceeds from this item benefit a local non-p...

94
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable - Gilroy
Audio-Technica AT-LP60-USB Fully Automatic Belt-Drive Stereo Turntable (USB and Analog). Open box but it appears to still be in the original wrapping. Proceeds from this item benefit a local non-pr...

95
Google Chromecast Ultra - Gilroy
Google Chromecast Ultra. Used open box item. Comes with Chromecast unit and power supply. Proceeds from this item benefit a local non-profit organization.

96
Google Home Mini. Factory sealed box - Gilroy
Google Home Mini. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

97
Arris SB6141 SURFboard Cable Modem - Gilroy
Arris SB6141 SURFboard Cable Modem. Open box, appears to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

98
Motorola MB7621 24x8 Cable Modem, Factory sealed box - Gilroy
Motorola MB7621 24x8 Cable Modem. Factory sealed box. Proceeds from this item benefit a local non-profit organization.

99
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo - Gilroy
Onkyo TX-8020 Stereo Receiver Ampli-Tuner Stereo. Open box, appears to be in excellent condition. Powers on as shown. Proceeds from this item benefit a local non-profit organization.

100
Pioneer SP-BS22-LR Bookshelf Speakers - Gilroy
Pioneer SP-BS22-LR Bookshelf Speakers Andrew Jones Designed. Open box, appear to be in excellent condition. Proceeds from this item benefit a local non-profit organization.

101
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1 - Gilroy
Leica CM1950 AG Protect Cryostat Microtome, CM 1950-11-0-1-1-1. It powers up and the inside gets cold. The handle moves smoothly and I am able to get response from the buttons as well.

102
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

103
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler - Gilroy
Perkin Elmer Optima 4300 DV Spectrometer w/ AS 93Plus Autosampler. I am unable to power on or test the spectrometer due to lack of appropriate power receptacle to plug the unit into. The autosample...

104
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder - Gilroy
West-Bond 7600B 90° Vertical Feed Deep Access Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder w...

105
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B) - Gilroy
West-Bond 747677B Convertible Wire Bonder w/ Gold Ball Bond Head (7700B). It will include a microscope and workholder. We do not currently have the other head/clamps for it.

106
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder - Gilroy
West-Bond 7700C Thermosonic Ball-Wedge Wire Bonder. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Workholder with Temperatu...

107
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder - Gilroy
West-Bond 4500 Programmable Semi-Automatic Ultrasonic Wedge Wire Bonder. It comes with everything shown, including a model 1600 Ultrasonic Generator, and a B&L SZ4 StereoZoom 4 Microscope (0.7X to ...

108
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller - Gilroy
West-Bond 7700B Gold Ball Wire Bonder w/ Heated Workholder & Controller. It comes with everything shown, including a B&L SZ4 StereoZoom 4 Microscope (0.7X to 3.0X) with eyepieces, and a Heated Work...

109
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads - Gilroy
Metronic PrintSafe AlphaJet Industrial Marking System w/ 4 Print-Heads. The unit powers-up as shown, although I simply do not have the tools or training to formally test this system, therefore no o...

110
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder - Gilroy
Dage BT22 Microtester w/22 gram Pull Tester & Heated Workholder.It currently has a 22gm Pull Test Load Cell installed.

111
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table - Gilroy
Sonitek EZ-501/1 TS500 Thermal Press w/GWS SP1000M Table. The unit powers-up and heats to the preset temperature. Once it has stabilized at the set temperature, you can initiate the cycle with the ...

112
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

113
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

114
Kadel Engineering Liquid Nitrogen Tank - Gilroy
Kadel Engineering Liquid Nitrogen Tank.

115
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3 - Gilroy
Intertek ELEKTA BodyFix Body Motion Management System Vacuum Pump P3. It powered on as shown in the photos above, but this is all it did. I do not know how to move about the various screens or test...

116
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly - Gilroy
Edwards QDP80 / QMB250 Dry Pump Booster Pump Assembly. I tried powering-up the pumps individually, the QMB250 Booster Pump powers-up although just the motor runs, the impellers do not rotate. The Q...

117
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B - Gilroy
Lauda Brinkmann RM6B Refrigerated Recirculating Chiller RM 6 B. It powers up, and recirculates and heats and cools water successfully, and I was able to adjust the set point. The locking lever on t...

118
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900 - Gilroy
Stryker Endoscopy SIDNE SUITE Integrated Control 240-020-900. It powered on with no problems and I was able to move about in several screens.

119
Bio-Rad Hydro-Tech Vacuum Pump - Gilroy
Bio-Rad Hydro-Tech Vacuum Pump. It powered on as I could hear it running.

120
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply - Gilroy
Keysight Agilent N5743A 12.5V 60A 750w System DC Power Supply. It powered on as shown, but I did not take it out of the static free packaging. I powered it on by cutting a small hole in the bag, ne...

121
Technics Plasma Processor 200E P.P.-200E - Gilroy
Technics Plasma Processor 200E P.P.-200E. This unit requires 220 VAC, 10A, 50Hz power for operation.

122
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H - Gilroy
Waters Micromass ZQ Spectrometer with Edwards Turbo Pump EXT 200/200H. I noticed some cables inside have been cut so I did not attempt to power it on.

123
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor - Gilroy
Goulds Pumps NPE Centrifugal Pump 1 X 1 1/4-6, Franklin Electric Motor.

124
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange - Gilroy
Varian 9127008 Diode Ion Vacuum Pump (270 l/s) w/ 8" CF Conflat Flange.

125
Flow Sciences FS2350 Vented Balance Safety Enclosure - Gilroy
Flow Sciences FS2350 Vented Balance Safety Enclosure. This listing also includes an FS1645 alarm kit.

126
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges - Gilroy
Garner CF750 Type II/Type II-A Tape Degausser VHS, 8mm, 3480 Cartridges. I was able to power on this unit. I had to open and shut the tray several times to be able to run a degaussing cycle, and th...

127
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump - Gilroy
Grundfos CRI5-8 AX-CA-I-E-HQQE A96734842P10826 Vertical Multistage Pump.

128
Grundfos BD050I3 85Z02410 Vertical Multistage Pump - Gilroy
Grundfos BD050I3 85Z02410 Vertical Multistage Pump.

129
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10932 Vertical Multistage Pump.

130
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HUBE A96482906P10517 Vertical Multistage Pump.

131
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump - Gilroy
Grundfos CRI5-5 A-CA-I-E-HQQE A97854693P31225 Vertical Multistage Pump.

132
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump - Gilroy
Grundfos CRI5-9 A-CA-I-E-HQQE A96543033P10838 Vertical Multistage Pump

133
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing - Gilroy
Justrite 891220 Flammable Liquid Storage Cabinet 12 Gallon Self Closing. The door on this unit opens and closes smoothly, and is self closing. Unit includes one shelf and two keys.

134
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet - Gilroy
Eagle Manufacturing Model 1903 4 Gal Flammable Liquid Storage Cabinet.

135
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max - Gilroy
Lab-Line 23805 Parts Bake Drying Oven 180ºC Max. I was able to power on this unit, and it was able to heat up to approximately 170ºC during my testing, over the course of approximately an hour. The...

136
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves - Gilroy
Forma Scientific 3546 Water Jacketed CO2 Incubator w/4 Movable Shelves. The unit powers-up, although without a water input/output connection the unit has a loud audible alarm, therefore no testing ...

137
VWR Scientific Model 1265PC Heated Circulating Water Bath - Gilroy
VWR Scientific Model 1265PC Heated Circulating Water Bath. I was able to power on this unit, and it circulates the water as well as heating as expected. I was able to heat water to approximately 40...

138
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity - Gilroy
Eagle Safety Storage Cabinet Model 1904 CRA 4 Gal Capacity.

139
Mactronix Eureka BBS-400 Wafer Transfer Station - Gilroy
Mactronix Eureka BBS-400 Wafer Transfer Station. The unit powers-up pneumatically & the transfer arm moves up/down smooth & quietly, although this is the only testing that has been performed.

140
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A - Gilroy
Agilent 16700A Logic Analysis Sys 16701A Expansion 16534A 16517A 16522A. The 16700A has three Plug-Ins installed: 16534A 2GSa/s Oscilloscope, 16517A Master Plug-In (4GHz Timing, 1GHz Synchronous) w...

141
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer - Gilroy
Gaertner Scientific L117 Ellipsometer w/ Video Camera & Computer. This Gaertner Scientific L117 Ellipsometer features an Imaging Source DBK31BU03 Video Camera, and a Computer with Mouse (a Monitor ...

142
VWR SCBMF-2020 Lab Freezer -20F -12C - Gilroy
VWR SCBMF-2020 Lab Freezer -20F -12C. It powered on and got down to set point fairly quickly before I turned it off.

143
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C - Gilroy
Tek-Temp RK-19 19" Rack Mount Recirculating Chiller 115VAC 4000BTU 4.0°C. It powers up, and recirculates and chills water successfully. When set to the minimum set point of 4.0°C, the temperature f...

144
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor - Gilroy
IEC Centra MP4 Benchtop Centrifuge w/ 815 Rotor. It powered on and spun with no problems. There are some scratches on the top as shown.

145
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester - Gilroy
Dage 2400 Wire Bond Pull & Ball Shear & Die Shear Tester.

146
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser - Gilroy
Lumenis Novus Varia w/ Remote & Head Gear Aperture OD=5+ Slit-Lamp Laser. It powered as shown in the photos and went through several screens. I do not have the correct fiber for it, so I could not ...

147
Olympic Medical BILI-Lite Model 80 Examination Light - Gilroy
Olympic Medical BILI-Lite Model 80 Examination Light. It powers on as shown in the photos.

148
Innovatis Cedex Automated Cell Counter w/ Computer + Software - Gilroy
Innovatis Cedex Automated Cell Counter w/ Computer + Software. Unit has an Olympus CX41 microscope installed. Computer is running Windows NT operating system. I was able to power on this unit, and ...

149
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet - Gilroy
Securall A110 16-Gallon Flammable Liquid Safety Storage Cabinet. The Cabinet comes with one movable shelf. The door opens & closes smooth & easily although it does not have an automatic door closer...

150
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W - Gilroy
Blue M Laboratory Oven M01440A 40ºC to 300ºC 120V 50/60Hz 1900W. This unit appears to be missing the upper vent cover. I was able to power on this unit, and I was able to heat it up to about 180ºC.

151
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

152
Bede Scientific QC-2A X-Ray Diffractometer - Gilroy
Bede Scientific QC-2A X-Ray Diffractometer. I plugged in this unit, and the EDR Detector Interface powered on. I was unable to get any other response from the unit.

153
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK - Gilroy
Advanced Thermal Sciences MP20H-GL ATS Temp Control System M-PAK. No testing has been done. Requires 208Vac 3-phase power.

154
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803 - Gilroy
Lydall Affinity S1k Refrigerated Circulating Chiller SAA-038-CE94C803. It powered on, but was coming up with a "PERR". Not sure if it is "Prime" issue or it needs to be repaired.

155
DisTEK VIP 4400 Dissolution Vessel Washer - Gilroy
DisTEK VIP 4400 Dissolution Vessel Washer. Powered on as shown in the photos.

156
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers - Gilroy
Lot 2 B. Braun Biotech DCU Tower Touch Panel Fermentation Controllers. One is set up to control two Vessels (featuring one BAB40 board, and two FIB3 Boards), and the other is set up to control four...

157
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive - Gilroy
Lot of 2 Justrite 17 Gal Safety Cabinets - 25802 Flammables & 25872 Corrosive. The doors on both cabinets open smoothly as expected and stay open. The doors do not have springs installed to auto c...

158
Kokusai Electric VR-30B Resistivity Test System - Gilroy
Kokusai Electric VR-30B Resistivity Test System. The "controller" and "man mode" lights turn on upon powering up, but I am unable to get it to do anything else.

159
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer - Gilroy
Ultron Systems UH120 Semi-Automatic Wafer/Substrate Fracturer. I was able to power on this unit, but it was unresponsive to button/knob manipulation.

160
Tegal Plasma Etcher System - Gilroy
Tegal Plasma Etcher System. It powers up and reaches a set point of 50°C. This piece is untested beyond that.

161
Neslab EX-251 Circulating Heated Water Bath 116003191600 - Gilroy
Neslab EX-251 Circulating Heated Water Bath 116003191600. I was able to power on this unit, and it was responsive to button presses. Unit was able to heat and circulate water as expected. I heated ...

162
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box - Gilroy
TOPCON TRC 50EX Ophthalmology Retinal Camera w/ V/A OIS + Sync Box. It powered on as shown in the photos. The power table goes up and down when prompted. The table does not have wheels on it. There...

163
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder - Gilroy
MEI Marpet Mech-El 907 45° Feed Wedge Wire Bonder w/ Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

164
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder - Gilroy
Mech-El 907 45° Feed Wedge Wire Bonder w/Heated Workholder. It comes with a B&L StereoZoom 4 Microscope, a Uthe 10G Ultrasonic Generator, and a Heated Workholder, as shown.

165
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7 - Gilroy
MM Micromanipulator MW30 Bright-Field Intensity Microscope w/ B&L SZ7. It features a Bausch & Lomb StereoZoom 7 Microscope (1X-7X) with a pair of 10X W.F. Eyepieces, as shown. The system powers up,...

166
Vision Engineering Dynascope Microscope - Gilroy
Vision Engineering Dynascope Microscope. The unit includes two Bausch & Lomb Optics, one is a 0.25 N.A 10x 215mm T.L. and the other is a 0.40 N.A. 20x 215mm T.L., please look at the photos. The uni...

167
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope - Gilroy
Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope. This Nikon Diaphot Inverted Binocular Phase Contrast-2 Microscope, with Nikon CF10X eyepieces & four optics, appears to be in good cosm...

168
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 Heat Exchanger P/N: 28681.

169
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

170
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor - Gilroy
Beckman J2-21 High Speed Refrigerated Centrifuge w/ JA-20.1 Rotor. I was able to power it on as shown and it appears to spin at both low and a high rate of speed. It also got to the cold setpoint a...

171
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600 - Gilroy
Affinity Lydall EWA-23DK-HE08CBS0 TSM Heat Exchanger P/N: 31600.

172
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120 - Gilroy
Blue M DC-206C GOP 343ºc - 650ºF 208-240V/1 Ph 60Hz Oven w/ FDC-4120. It powered on and started heating up very quickly. Please see photos of temperature control panel. It will need to be fitted w...

173
Plasma Technology PL80 Plasma Etcher - Gilroy
Plasma Technology PL80 Plasma Etcher.

174
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp - Gilroy
Suzhou Pac-Dent iBrite PD-110-W Tooth / Teeth Whitening Curing Lamp. It powered on as shown in the photos.

175
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly - Gilroy
Multiple Axis (8 Axes) Manual & Motorized Optical Positioning Assembly. All of the axes appear to be manually controlled, except the main Z-Axis positioner in the mounting base, which features an O...

176
JRE Test Shielded RF Test Enclosure JRE2218 - Gilroy
JRE Test Shielded RF Test Enclosure JRE2218. This unit has one handle installed that is somewhat loose. There is also a cut in one of the side panels that was used to feed cables through.

177
Lytron Kodiak RC006G02BB3 Recirculating Chiller - Gilroy
Lytron Kodiak RC006G02BB3 Recirculating Chiller. The lower front panel has two broken mounting tabs and is held in position with tape. There is no power cord included with this Chiller. Please look...

178
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System - Gilroy
M&W Systems RPCX28A-3.8HE-RNB Flowrite Recirculating Cooling System. The unit requires 208-230Vac 3-ph 5-wire connection that I am unable to provide.

179
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word STRYKER is Scrambled to TUR.KER.

180
Stryker 26" Vision Elect HD Surgical Viewing Monitor - Gilroy
Stryker 26" Vision Elect HD Surgical Viewing Monitor. It powered on using a test cord. No Power Cord Included. The word "Stryker is scrambled to Suqxbr".

181
Stryker Vision Elect 21" HD Surgical Monitor Display - Gilroy
Stryker Vision Elect 21" HD Surgical Monitor Display.

182
Triumph Ideal 5210-95 20" Guillotine Paper Cutter - Gilroy
Triumph Ideal 5210-95 20" Guillotine Paper Cutter. The unit powers-up with 115Vac and cuts paper effortlessly as shown. The stack of paper that I cut for the photographs measured about ¾” of an inc...

183
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian - Gilroy
Labconco 4' XPert Filtered Balance System Hood Enclosure w/ Guardian. The unit powers-up, the fluorescent lamp illuminates and the blower runs smooth & quietly. When the blower is on the Air Filter...

184
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside - Gilroy
Lot (2) Marine Ship Fuel Gas Flow Units 17 Inch Outside - 12 Inch Inside.

185
Illumina Bead Array Reader 11332140 - Gilroy
Illumina Bead Array Reader 11332140. It powered on and lights came on. Missing screws on lid.

186
Illumina Bead Array Reader 149928 - Gilroy
Illumina Bead Array Reader 149928. It powered on and lights came on. Missing screws on lid.

187
Laboratory Liquid Handler Parts Repair - Gilroy
Laboratory Liquid Handler Parts Repair.

188
Beckman Avanti 30 Centrifuge 208Vac 1-Phase - Gilroy
Beckman Avanti 30 Centrifuge 208Vac 1-Phase. The unit powers-up, although I am unable to get the lid latch to release. Without a view-port in the lid I cannot tell if there is a rotor installed or ...

189
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder - Gilroy
Xynetics Electroglas Model 1034X Prober w/ 5x7-48 Card, 229-2 Holder

190
Ebara 50x20 Dry Vacuum Pump - Gilroy
Ebara 50x20 Dry Vacuum Pump. The J1 plug on the top of the control panel is damaged and the Emergency-Stop switch has a key broken off in it. Please look at the photos. Since the Emergency-Stop swi...

191
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC - Gilroy
Branson B250 Vapor Degreaser 40kHz Ultrasonic Cleaner B-250-R-SP, 230VAC

192
DEKA Cynosure Smartepil II Medical Laser - Gilroy
DEKA Cynosure Smartepil II Medical Laser. It powered on as shown in the photos above and moved through several screens with no problems. It is coming up with errors as shown on the screen. I do not...

193
ITT Engineered Control Valve w/ 2½" Sanitary Flange - Gilroy
ITT Engineered Control Valve w/ 2½" Sanitary Flange.

194
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange) - Gilroy
Fisher Controls 667-30 Actuator EZ Control Valve (1" FNPT Flange).

195
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor - Gilroy
Edwards E2M40 Rotary Vane 2-Stage High Vacuum Pump w/Leeson 2-HP Motor.

196
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp - Gilroy
Lafouda Magnetostriction Tester Newport Breadboard EG&G 5105 Lock-In Amp. This Lafouda Automated Magnetostriction Tester features a Newport Metric Breadboard (750mm x 900mm), an EG&G 5105 Lock-In A...

197
Becton Dickinson BBL Biological Safety Cabinet - Gilroy
Becton Dickinson BBL Biological Safety Cabinet. It powered on as shown in the photos above. There is no filter or UV light in the cabinet. When turning the blower on, an alarm sounds.

198
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor - Gilroy
Fosdick 4BM Sensitive Drill Press w/GE 1.5-HP Motor. The unit does not power-up, although it could be as simple as rewiring it for 220Vac 3-phase input as it may be currently wired for 440Vac 3-pha...

199
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera - Gilroy
UVP Epi Chemi II Darkroom w/ M-26 Transilluminator + CM50-S1 Camera. I was able to power on this unit, and it was responsive to knob adjustments. The unit was able to power the transilluminator, an...

200
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf - Gilroy
Eagle Model 1904 4-Gal Safety Storage Cabinet - One Shelf.

201
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF - Gilroy
Ankom 2000 Fiber Analyzer A2000 for Crude Fiber, ADF, NDF. I was able to power on this unit, and it was responsive to button presses. I was able to attempt to run a cycle, but without access to rea...

202
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331 - Gilroy
CleanStation Super DT3 3D Printer Support Dissolve Tank OBJ-01331.This unit appears to be new in a sealed box. Packaging shows signs of shelf wear and previous shipping.

203
Ametek DR523K72 Regenerative Blower - Gilroy
Ametek DR523K72 Regenerative Blower. The unit powers-up & blows smooth & quietly. It requires 191-208 or 381-416Vac 3-Phase electrical input. There is no power cord included with this blower. This ...

204
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software - Gilroy
PerkinElmer Fusion A135600 Microplate Reader w/ Stacker & Software. This listing includes: Perkin Elmer Fusion A135600, Installed Plate Stacker, Dell computer running Windows 2000, Monitor, Keyboar...

205
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input - Gilroy
Eaton 9130 UPS PW9130L2000T-XL 2000VA 1800W 120V 5-20P Input. This unit appears to be new old stock sealed in the box. Packaging shows signs of shelf wear and previous shipping. There is a stain on...

206
Shel Lab Agilent Technologies G2545A Hybridization Oven - Gilroy
Shel Lab Agilent Technologies G2545A Hybridization Oven. The unit powers-up and heated from 8.7°C up to 68°C and stabilized in about 20 minutes. The rack rotates smooth & quietly and responds to th...

207
Olympus Microscope Boomstand - Gilroy
Olympus Microscope Boomstand.

208
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, and it was responsive to button presses. The unit initially showed "Programs & setup lost-...

209
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020 - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.020. I was able to power on this unit, however the majority of the buttons on the keypad were non-responsive. I was unable to run...

210
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph - Gilroy
Baldor Reliance VEJMM3157T 2HP Super-E Motor 230/460Vac 3-Ph.

211
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph - Gilroy
Baldor Reliance 84Z40451 1.5HP Super-E Motor 208-230/460Vac 3-Ph. The output shaft is 5/8” inch in diameter that is keyed, the keyway key is included. Please look at the photos.

212
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser - Gilroy
Musashi Engineering SHOT Mini M22-123 Desktop Robot Liquid Dispenser. I was able to power on this unit, and pressing the "Origin Reversion" button caused the arm and platform to move around to the ...

213
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

214
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A - Gilroy
Watson Marlow 624Di Digital IP55 Washdown Peristaltic Pump 060.2204.02A. This unit has scuffs and scratches present, as well as staining and corrosion, primarily in the pump head. There is some cor...

215
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head - Gilroy
Watson Marlow 505Du Digital Auto 220RPM Peristaltic Pump w/ 7014-21 Head. I was able to power on this unit, and it was responsive to button presses. I was able to run the pump in Manual mode, it wa...

216
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand - Gilroy
Kinetic Systems Vibraplane 5102-3648-01 48x38x2" Breadboard w/Stand. There are ¼”-20 threaded holes approximately every inch.

217
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives - Gilroy
Lot (4) Euclid Universal EU CD300 Chassisdrive Traction Drives. The units power-up with 24Vdc that I am unable to provide therefore no testing has been performed.

218
Met Pro Duall Division CAS-24 MOD Air Handling Unit - Gilroy
Met Pro Duall Division CAS-24 MOD Air Handling Unit.

219
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. There was visible water agitation in the bath, but the rear n...

220
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath - Gilroy
Lauda RM10 S/B Heated Refrigerated Recirculating Water Bath. I was able to power on this unit, and it was responsive to button presses. The water was circulating inside the bath, however the two ex...

221
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W - Gilroy
Varian VHS-6 Diffusion Pump 0184/VHS-6 208V 2200W.

222
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

223
LAUDA WKL 230C Circulating Cooling Water Bath Chiller - Gilroy
LAUDA WKL 230C Circulating Cooling Water Bath Chiller. It powered on as shown. It appears to have chilled down close to set point when prompted. It appears to chill only as I ran it for several hou...

224
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph - Gilroy
Weg 1Hp Electric Motor 208-230/460Vac 3-Ph. The unit powers-up and runs smooth & quietly, although this unit does not include a power cord. This is the only testing that has been performed.

225
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer - Gilroy
 Leeson C42D17FK1C 90Vdc Perm Magnet Motor w/W6215034 125:1 Reducer. The unit powers-up with 90Vdc which I am unable to provide, therefore no testing has been performed.

226
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller - Gilroy
Julabo FW34 Water-Cooled Water Bath Chiller w/ CA Digital Controller. It powers up, and the digital display is bright and clear, and it responds to input from the controls, and it heats water succe...

227
Elgar 1001B AC Power Source w/ 400SD Oscillator - Gilroy
Elgar 1001B AC Power Source w/ 400SD Oscillator. The unit powers-up and the fans run smooth & quietly, although I am unable to get the AC Volts gauge to respond. No further testing has been done.

228
BMG Labtech Stacker III Microplate Stacker for Microplate Readers - Gilroy
BMG Labtech Stacker III Microplate Stacker for Microplate Readers. I was able to power on this unit, and the green indicator light in front blinks.

229
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair - Gilroy
Instron 4443 Benchtop Tensile Testing Machine Parts/Repair. The unit powers-up and I am able to get the platform to move down although I am unable to get it to move in the up direction.

230
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar - Gilroy
Cryo Diffusion L2025M 25-Liter Aluminum Liquid Nitrogen Dewar.

231
Buchi B-191 Mini Spray Dryer - Gilroy
Buchi B-191 Mini Spray Dryer. The unit powers-up and the display responds to manipulation of the control panel. The peristaltic pump powers up & rotates smooth & quietly. This is the only testing t...

232
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor - Gilroy
Biocare Medical Nemesis 3600 Autostainer w/ Computer and Monitor. I was able to power on this unit as well as the accompanying computer. The computer is running Windows XP and appears to have the s...

233
Advanced Research Systems ARS-2HW Cryogenic Compressor - Gilroy
Advanced Research Systems ARS-2HW Cryogenic Compressor. The unit powers-up with 200-230Vac 1-Phase 60Hz input although I do not have the correct electrical receptacle to plug it into therefore no t...

234
Roth Pump Company 1SE5777DBF Pump Head - Gilroy
Roth Pump Company 1SE5777DBF Pump Head. Please note that this is just the Pump Head and does not include a motor.

235
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump - Gilroy
Coker Pump Gast 2565-V4C-T336 Rotary Vane Vacuum Pump.

236
ENI ACG-10B RF Generator ACG-10B-01M11 - Gilroy
ENI ACG-10B RF Generator ACG-10B-01M11. I was able to power on this unit, and it appeared to be responsive to button presses and knob manipulation. The meter appeared to be accurate to the dial on ...

237
Garner Products CDS Series Degausser CDS-2500A - Gilroy
Garner Products CDS Series Degausser CDS-2500A. This unit does not power up.

238
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank - Gilroy
Busch Vacuum Systems RC0100-C506-1001 Vacuum Pump w/ 39162-A Tank.

239
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead - Gilroy
Reliance Electric P25G1124C 15HP Duty Master Motor w/4.87:1 Gearhead. The unit will require hard wiring prior to powering-up, therefore no testing that has been performed. I am able to rotate the o...

240
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC - Gilroy
Across International StableTemp-25 Forced Air Oven 570ºF/300ºC. The exhaust port appears to have been removed by a previous user. I was able to power on this oven, and it heated to a set point of 4...

241
VWR Scientific 1400E Laboratory Vacuum Oven 9100574 - Gilroy
VWR Scientific 1400E Laboratory Vacuum Oven 9100574. The oven also has corrosion and staining inside the chamber. There is also a split in the rubber seal. I was able to power on this unit, and it ...

242
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor - Gilroy
Beckman Allegra 6 Centrifuge 366802 w/ GH-3.8 Rotor. Please Note: No buckets are included with the rotor. I was able to power on this unit, and it was responsive to knob adjustments. I was able to ...

243
Edwards EB3 Electron Beam Power Supply E09061000 - Gilroy
Edwards EB3 Electron Beam Power Supply E09061000.

244
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer - Gilroy
Shimadzu GC-17A & GCMS-QP5000 Gas Chromatograph Mass Spectrometer. The units power-up and appear to respond to the control settings. It heated from about 24°C up to about 127°C in about 10 minutes....

245
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig - Gilroy
Logitech PM5 1PM52 Lapping & Polishing Machine w/1 Jig. The unit powers-up and the digital displays are clear & easy to read. The lapping plate rotates smooth & quietly and responds to the speed se...

246
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M - Gilroy
Leybold Trivac D8C Rotary Vane Vacuum Pump #31048M. The unit powers-up & draws up to 740mmHg of vacuum as shown. The digital vacuum gauge is not included. This is the only testing that has been per...

247
Blue M Stabil-Glow Tube Furnace TF-2420C-3 - Gilroy
Blue M Stabil-Glow Tube Furnace TF-2420C-3. The inside dimensions of the furnace (over the heating coils) is approximately 2.375” inches in diameter by 24.500” inches long. Please look at the photo...

248
Mettler Toledo MultiMax Automated Reactor System - Gilroy
Mettler Toledo MultiMax Automated Reactor System. Included are the following components; One RB04-50 with a Docking Station, One Universal Control Box w/MultiMax upgrade, One Dispenser Box, One Ele...

249
Laserscope Greenlight PV Surgical Laser - Gilroy
Laserscope Greenlight PV Surgical Laser. It powered as shown in the photos and went through several self-tests. It stopped on "Problem 10". The key shown in not included, but it takes a standard 31...

250
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler - Gilroy
New Brunswick Scientific MP-320 Pourmatic Automatic Petri Dish Filler. This unit includes a Service Manual. I was able to power on this unit, but it appears to have a couple of problems. When press...

251
Baxter Scientific Products DX41 Laboratory Drying Oven - Gilroy
Baxter Scientific Products DX41 Laboratory Drying Oven. I was able to power on this unit, however after about 25 seconds the unit emits a loud beep and lights up the Alarm indicator. The oven did n...

252
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump - Gilroy
Savant SpeedVac SC110 Concentrator + RT100 Refrigerated Trap, VP100 Pump. I was able to power on these units. The concentrator was able to spin, and appeared to change speeds between low, medium, a...

253
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - Gilroy
Pro-Form Sport 6.0 Treadmill PFTL50915.1, ProForm - It powered up as shown and responded correctly when buttons were pressed, however that was the extent of my testing and it is being sold as-is.

254
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60" - Gilroy
TMC Micro-g Vibration Isolation Lab Table 36-571 36"x60".

255
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module - Gilroy
Hermes Vanguard 3400 CNC Engraver w/ EP Control Module. The unit powers-up and the shows a black line across the readout. I am unable to get the EP controller to do anything else, therefore I belie...

256
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope - Gilroy
Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope. This includes the Carl Zeiss Axioplan Fluorescence Phase Contrast Trinocular Microscope, with a 99S000 Power X/Y Stage, an Oly...

257
Nikon Measurescope MM-11 Trinocular Measuring Microscope - Gilroy
Nikon Measurescope MM-11 Trinocular Measuring Microscope. The microscope is equipped with X/Y glass measuring scales, although there is only one connecting cable and it does not include a display u...

258
ENI MKS Optima Master OPT-400A DC Plasma Generator - Gilroy
ENI MKS Optima Master OPT-400A DC Plasma Generator. It powered on using a test power cord as shown in the photos. Test power cord not included.

259
Huttinger PFG2500RF RF Generator Power Supply - Gilroy
Huttinger PFG2500RF RF Generator Power Supply.

260
Karl Suss MJB3 Mask Aligner, Type 401001 - Gilroy
Karl Suss MJB3 Mask Aligner, Type 401001. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces, and Objectives H20X/.0.40, NPL 5X/0.09, and 10X/0.18.

261
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor - Gilroy
Leybold Trivac D8A Vacuum Pump w/GE 1 HP Motor. The unit powers-up & draws up to 710mmHg of vacuum. The digital vacuum gauge shown is not included. This is the only testing that has been performed.

262
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector - Gilroy
Lot of Rainin Dynamax SD-200 Solvent Delivery UVD11 Absorbance Detector. All components but one powered on (Top Right) as shown in the photos.

263
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150 - Gilroy
New Brunswick Innova 2100 2150 Platform Shaker M1194-0150. I was able to power on this unit, and it was responsive to button presses. Unit was able to shake as expected. I started the unit at 120RP...

264
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet - Gilroy
Eagle Manufacturing 1924 12 Gallon Capacity Safety Storage Cabinet. The door closes automatically, although handle must be latched/locked by hand. This is the only testing that has been performed.

265
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240 - Gilroy
Agilent DS 202 RVP Dual Stage Rotary Vane Vacuum Pump G3850-80240. I was able to power on this pump, and it ran without any immediately obvious problems. I attached a vacuum gauge and it showed the...

266
Varian 9499240 MS40+ Rotary Vane Vacuum Pump - Gilroy
Varian 9499240 MS40+ Rotary Vane Vacuum Pump. When power is applied this status lamp flashes yellow a few times then changes to flashing red although the motor does not turn on.

267
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump - Gilroy
Agilent 9499225 MS40+ Rotary Vane Vacuum Pump. This vacuum pump does not include the required control box. Due to the lack of a control box no testing has been performed.

268
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide - Gilroy
Scandinavian Health Laboratory Press/ Pen Injector Holder/ Slide.

269
Texas Instruments 3133367-1 Processor Rack Interface - Gilroy
Texas Instruments 3133367-1 Processor Rack Interface

270
Shimadzu GC-8A Gas Chromatograph HPLC - Gilroy
Shimadzu GC-8A Gas Chromatograph HPLC. I am able to power on this chromatograph. I could hear the system running and I could feel air blowing when I opened the door. The analog dials on the front p...