4/4 Nice Hay & Harvest Equip | Livestock Equip | Shop Items
Listing ID#: 674713

Sale Location

Manchester, OK 73758
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Mar 5
Bidding Ends: Thursday Apr 4
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Wiggins Auctioneers

Contact: Stephanie Harper
Phone: (580) 233-3066
Email: stephanie@wigginsauctioneers.com
Website: www.wigginsauctioneers.com/

EstateSale.com ID#: 9593
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

1. All bidders must be registered to bid, and will not be accepted without providing name, address, phone, and valid ID. By registering for the auction, bidder agrees to and accepts the terms and conditions of the auction set forth herein.
2. All items are being sold "As-Is, Where-Is". All sales are final. Bidders are encouraged to inspect items being sold and are solely responsible to satisfy themselves as to any inspections, current condition, usability, etc. prior to bidding. Buyer is solely responsible for the item upon the auctioneer stating "sold" or the "close" of auction.
3. PREVIEW: Fri., March 29th, 2024, 2-4PM
4. PAYMENT & TAX INFO: A 5% Buyer's Premium will be added to the high bid at auction to determine the purchase price. Acceptable forms of payment include cash, company/personal check, credit card, or wire transfer. . A 3% card convenience fee will be added to the invoice if paid by credit/debit card. No credit/debit cards will be accepted for items needing shipment. All items needing shipment must be paid in full by wire transfer only. All invoices must be paid in full prior to removal. In the event Buyer has not paid accordingly, the registered credit card shall be automatically processed on any unpaid balances, unless other arrangements have been made. Purchases are subject to city, county, and state sales tax, where applicable, unless Buyer provides appropriate exemption permit.
5. PICK UP/REMOVAL: Buyer pick up/removal date(s) and time(s): Fri., April 5th, 2024, 9AM-3PM. No load out shall be provided by the Seller or the Auction Company (BRING HELP & NECESSARY EQUIPMENT). Although we understand hardships and situations arise, we simply do not have the manpower or storage capacity for items which are not retrieved on designated pick up/removal date(s) and time(s). Please make every attempt to attend the above designated pick up/removal or send someone on your behalf.
6. FORFEITURE: In the event Buyer does not attend the designated pick up/removal, the Auction Company will make reasonable effort to arrange a separate scheduled date & time for Buyer to retrieve items; however, no guarantee is made by the Seller or the Auction Company. An additional fee may be assessed by the Auction Company for a separate scheduled pick up/removal. If items are not retrieved by 5 PM, Fri., April 19th, 2024, then Buyer automatically forfeits items and the Seller and/or Auction Company may dispose of the items at their sole discretion with no further liability to the Buyer.
7. SHIPPING INSTRUCTIONS (U.S. Only): Buyer is to notify Auction Company within 24 hours of close of auction, if shipping is needed. Upon payment in full by wire transfer only, Auction Company will deliver items less than 30# to local shipping company for shipment. Instructions and payment to shipping company for packaging, insurance, and shipping are Buyer's sole responsibility. The Auction Company is not responsible or liable for any issues arising from shipment.
8. UNPAID INVOICES: The Buyer agrees to pay all invoices and/or debts to Wiggins Auctioneers in accordance to the terms set forth herein. In the event such invoices and/or debts are not paid, there will be late charges accrued at the rate of 15% per year or the max interest allowed by law. Buyer also agrees to reimburse Wiggins Auctioneers for any attorney fees, collection fees, and/or costs incurred in order to collect any past due amounts or enforce the auction terms set forth herein. Venue for any litigation is agreed to be in Garfield County, Oklahoma.
9. All information is taken from sources believed to be reliable; however, no guarantee is made by the Auction Company nor the Seller. Buyer(s) shall satisfy themselves as to value, size, condition, etc. prior to auction day.
10. The Auction Company, Seller or an Agent/Representative reserve the right to bid on behalf of themselves or a third party. Announcements made day of auction take precedence.
11. For convenience, this auction is being broadcast online. Neither the Auction Company nor the Seller is responsible for delay of signal or loss of signal by either side.
12. Bidder hereby agrees to sign/accept by electronic means, and that the electronic signature/acceptance shall have the same force and effect as an original signature.
Listing Information
Nice, Well-Cared-For Hay & Harvest Equipment Case IH MX150 & MX170 Tractors | Gleaner R62 Combines | Platform Headers JD Round Balers | NH Square Baler | H&S 14 Wheel Rake | Grain Cart Attachments & Implements | Assorted Pipe | Livestock Equip., Panels, & Fencing Upright Grain Bin | Fuel Tanks | Riding Mowers & Lawn Equip. | Sm. Engines Generators | Upright Air Compressor | Welder & Welding Table Many Tools, Shop Items, & MORE! ONLINE ONLY AUCTION Begins Closing at 6 PM on Thurs., April 4th, 2024 Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM Visit WigginsAuctioneers.com for photos, terms, & online bidding! Lynsie Sturgeon, Auction Mgr., 580.554.2633 Sellers: Bollman Ag, LLC

1
Preview & Pick Up Information
Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM

2
2001 Case IH MX170 with Loader
S/N: JJA0114703 Very Well Maintained, Always Shedded! Runs and Operates Great! Case IH L705 Loader with Joy Stick 5.9 Liter Cummins Engine Shows 8,711 +/- Hours MFWD with Differential Lock 540/1000 PTO Front Tire Size: 380/85R30 Rear Tire Size: 18.4...

3
1998 Gleaner R62 Combine
S/N: R6268152 Corn/Bean Special Package Well Maintained, Always Shedded 8.3 Cummins, Strong Engine 4825 Engine Hours 3555 +/- Separator Hours A/C Runs Cold Rotor and Cage in Good Shape Newer Accelerator Rolls Variable-Speed Feeder House Straw Chopper...

4
1994 Gleaner R62 Combine
S/N: R6264495L Meticulously Maintained, Always Shedded Extremely Clean Combine 2-Owner Combine 8.3 Cummins Engine Has Been Replaced 5862 +/- Engine Hours (Current Engine has Approx. 3000 +/- Hours) 4161 +/- Separator Hours A/C Runs Cold Tinted Windo...

5
1998 Case IH MX150 with Loader
S/N: JKA0454951 Euro Model Very Well Maintained 5.9 Cummins Engine Shows 2915 +/- Hours, Hour Meter Has Been Replaced (Unknown Hours) Stoll FZ 50.1 Self-Leveling Loader with Joy Stick MFWD with Differential Lock 540/1000 PTO Creeper Gear 3 Remotes Ac...

6
2002 Ram 2500 Service Truck
Mileage: 223,298 +/- 360 Engine 2WD New Tires Runs and Drives Well Transmission Shifts Smooth Tommy Lift Gate Solid Box, Good Doors

7
2004 John Deere 567 Baler
Well Maintained, Always Shedded Bale Count � 20,483 Mega-Wide Pick-Up Net and Twine 1000 PTO Less than 600 +/- Bales on New Belts Less than 500 +/- Bales on Complete New Pick-Up Newer Rims and Tires Complete New Wiring Harness Good, Reliable Bal...

8
2016 John Deere 569 Baler
S/N: E00569DTFG426010 Well Maintained, Always Shedded Bale Count � 16,470 Net Only 1000 PTO Harness and Monitor Fits Any Tractor Good Chains and Sprockets Several New Bearings New Main Drive Roller Good, Reliable Baler � Ready to Work!

9
2005 GMC 2500 with Flat Bed and Factory Bed
Mileage: 285,783 +/- Runs and Drives Transmission Shifts Smooth Solid Transfer Case Bed Hydraulics Work Well Comes with Factory Bed and Rear Bumper Has Had Engine Work Done New Fuel Pump Two New Tires

10
2018 Case IH DC163
S/N: HBJDC163HJN263908 Well Maintained 2018, Bought New in 2019 Has 4 Seasons On It Reliable Machine 16ft Discbine 1000 PTO Draw Bar Hitch

11
H&S High-Capacity 14-Wheel Rake
Older Rake with Some Welds High-Capacity Good Tires Ready to Work!

12
New Holland Hayliner 276
Well Maintained, Always Shedded! 540 PTO Nice Baler, Works Well

13
New Holland Hydraulic Basket Rake
All Metal Teeth, No Rubber Good Tires Ready to Work!

14
2004 Flicklin CA14000 Grain Cart
Well Maintained, Always Shedded! Hydraulic Folding Auger New Lower Auger and Bearings 1000 PTO Solid Bottom, No Holes or Rust Upgraded, Oversized Tires Tarp and Hardware (Has a couple of holes)

15
1994 Gleaner AGCO Model 400 Platform
Well Maintained, Always Shedded! Solid, Straight Header Single Pt Hook Up Ready to Work!

16
2003 MacDon 962
S/N: 153771 Meticulously Maintained, Always Shedded! 872 MacDon Adapter to Fit Gleaner Low-Acred Machine Good Tires 500 +/- Acres on New Sickle and Sickle Bar New Roller Bearings 2023 Includes Owner Manuals for Header and Adapter Field-Ready!

17
New Holland 1441 Parts Swather
Missing Cutter Bar Missing Front Half of Drive Line Everything else is there and straight Great Parts Machine!

18
John Deere 1600 Chisel
Approx. 24� Needs One Tire to Move

18
Shop-Built Hay Spike
Euro-Mount 3 Spikes Built to Handle Large Square Alfalfa

19
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

20
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

21
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

22
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

23
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

24
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

25
Mixed Pipe
2 3/8" & 2 7/8", some holes, some splits, various lengths, 19 pieces in total.



28
Complete Tub & Alley
Cut into 5 pieces, needs reassembly. Made out 2 3/8" pipe & heavy gauged sheet metal.


30
(3) Ranch Pro Cattle Gates
(2) approx. 12', (1) approx. 16'.

31
(4) Cattle Gates
Approx. (2) 12', (1) 8', (1) 4'. 3 gates are Ranch Pro.

32
Wire Cattle Panels
Approx. (4) 15', (1) 13'.

33
Wire Cattle Panels
Approx. (5) 16', (2) 12'.

34
WWII Runway Grate Panels
Approx. (6) 12' panels, (1) 8' panel.

35

36
(2) Metal Gates
(1) 12 ft Gate and (1) 3.5 ft Gate



39
(2) Heavy Gates Mounted on 4in. Pipe
(2) Heavy 2" Square Frame Metal Gates Mounted on 4" Pipe 4' 6" Hx 13' 1" L

40
(2) Heavy Metal Frame Gates
15.5' x 4.5' Heavy 2" Square Tubing Frame

41
(2) Cattle Panels
(1) 10' x 4' Panel (1) 11' x 4' 10" Panel

42
Heavy Cattle Panel
14' x 4.5' Panel

43
Heavy Cattle Panel
19' x 4' 1.5" Tubing, 6-Bar Panel



46
Heavy Cattle Panel
20' x 5' 10"






51
92 Gal. Fuel Tank with Tool Box
Fuel Tank with Tool Box, Needs New Fuel Pump 55" w x 32" d x 25" h Holds 92 Gallons

52
100 Gal. Metal Fuel Tank
100 Gal Metal Fuel Tank w/ Working Pump 45" w x 23" d x 24" h No Rust!

53
Heavy Duty Bucket and Grapple Attachment
Heavy Duty Bucket and Grapple Attachment Euro-Mount 8' w x 32" h x 34" d


55
John Deere Bale Flipper
John Deere Small Square Bale Flipper

56
Gleaner Lateral Tilt
Gleaner Lateral Tilt, Came off R62 Lot Includes a box of lateral tilt hardware




60
Shop Built 3-Point Hay Spike
Shop-Built 3-Point Hay Spike Built Heavy for Large-Square Alfalfa Bales Gooseneck Ball Stub Hitch

62
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 30.5L32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

63
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 24.5-32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

64
(2) Tractor Dual Tires
(2) Tractor Dual Tires Came Off John Deere 4440 Clamp-On Style Rims 20.8-34















79
(7) Galvanized C Purlin, Approx. 1" x 8" x 10'
(7) 1" x 8" x 10' Metal C Purlin


81
3-Tier Scaffolding on Wheels
3-Tier Scaffolding on Wheels Buyer Disassembles




85
Assorted Square Tubing
(4) 6" x 6" x 8.5' Heavy Wall Square Tubing (7) 4" x 4", Assorted Lengths Ranging 4' to 7.5'

86
Continental Belton 3-Point Post Hole Digger
Continental Belton 3-Point Post Hole Digger, 540 PTO


88
120 Bushel Upright, Cone-Bottom Grain Bin on Skids
120 Bushel Grain Bin on Skids Great Grain Bin, No Holes

89
B&W Trailer Hitch
B&W Trailer Hitch with Turn-Over Ball Came Out of 2005 GMC 2500


91
WeatherGuard Pick-Up Bed Tool Box
WeatherGuard Tool Box ONLY

92
TSC Aluminum Tool Box
TSC Tool Box ONLY

93
(2) 6" Grain Augers
The short auger is straight, the long auger is bent.












101
John Deere Baler Parts
Storage tub is included.



104
Columbia Vise
Approx. 4" wide jaw.

105
Metal Wall Cabinet
Approx. 25" tall, 6" deep, 34" wide.




109
Power Mate Air Tools
3/8" ratchet, 1 cutoff grinder, 3/8" impact. They do work.

110
(2) Pneumatic Air Tools
3/8" Craftsman air ratchet, 1 air hammer.


112
John Deere Cornhead Grease
Full case, 10 tubes.


114



117
(4) Jack Stands
Unknown brands.


119
Misc. Drive Shaft Yoke Parts
1 storage tub is included.







126
Misc. Car Parts
Oil filters, ignition coil, brake pads, fuel tank cap.





131
Elec. shop grinder on heavy stand (works)
Buyer is responsible for removal.






137
2 Belt Sanders
Craftsman & Unknown brand.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

4/4 Nice Hay & Harvest Equip | Livestock Equip | Shop Items

Wiggins Auctioneers

Wiggins Auctioneers


Contact: Stephanie Harper
Phone: (580) 233-3066
Sale Location
30643 County Road 780
Manchester, OK 73758
Sale Dates and Times
Sale Terms and Conditions
1. All bidders must be registered to bid, and will not be accepted without providing name, address, phone, and valid ID. By registering for the auction, bidder agrees to and accepts the terms and conditions of the auction set forth herein. 2. All items are being sold "As-Is, Where-Is". All sales are final. Bidders are encouraged to inspect items being sold and are solely responsible to satisfy themselves as to any inspections, current condition, usability, etc. prior to bidding. Buyer is solely responsible for the item upon the auctioneer stating "sold" or the "close" of auction. 3. PREVIEW: Fri., March 29th, 2024, 2-4PM 4. PAYMENT & TAX INFO: A 5% Buyer's Premium will be added to the high bid at auction to determine the purchase price. Acceptable forms of payment include cash, company/personal check, credit card, or wire transfer. . A 3% card convenience fee will be added to the invoice if paid by credit/debit card. No credit/debit cards will be accepted for items needing shipment. All items needing shipment must be paid in full by wire transfer only. All invoices must be paid in full prior to removal. In the event Buyer has not paid accordingly, the registered credit card shall be automatically processed on any unpaid balances, unless other arrangements have been made. Purchases are subject to city, county, and state sales tax, where applicable, unless Buyer provides appropriate exemption permit. 5. PICK UP/REMOVAL: Buyer pick up/removal date(s) and time(s): Fri., April 5th, 2024, 9AM-3PM. No load out shall be provided by the Seller or the Auction Company (BRING HELP & NECESSARY EQUIPMENT). Although we understand hardships and situations arise, we simply do not have the manpower or storage capacity for items which are not retrieved on designated pick up/removal date(s) and time(s). Please make every attempt to attend the above designated pick up/removal or send someone on your behalf. 6. FORFEITURE: In the event Buyer does not attend the designated pick up/removal, the Auction Company will make reasonable effort to arrange a separate scheduled date & time for Buyer to retrieve items; however, no guarantee is made by the Seller or the Auction Company. An additional fee may be assessed by the Auction Company for a separate scheduled pick up/removal. If items are not retrieved by 5 PM, Fri., April 19th, 2024, then Buyer automatically forfeits items and the Seller and/or Auction Company may dispose of the items at their sole discretion with no further liability to the Buyer. 7. SHIPPING INSTRUCTIONS (U.S. Only): Buyer is to notify Auction Company within 24 hours of close of auction, if shipping is needed. Upon payment in full by wire transfer only, Auction Company will deliver items less than 30# to local shipping company for shipment. Instructions and payment to shipping company for packaging, insurance, and shipping are Buyer's sole responsibility. The Auction Company is not responsible or liable for any issues arising from shipment. 8. UNPAID INVOICES: The Buyer agrees to pay all invoices and/or debts to Wiggins Auctioneers in accordance to the terms set forth herein. In the event such invoices and/or debts are not paid, there will be late charges accrued at the rate of 15% per year or the max interest allowed by law. Buyer also agrees to reimburse Wiggins Auctioneers for any attorney fees, collection fees, and/or costs incurred in order to collect any past due amounts or enforce the auction terms set forth herein. Venue for any litigation is agreed to be in Garfield County, Oklahoma. 9. All information is taken from sources believed to be reliable; however, no guarantee is made by the Auction Company nor the Seller. Buyer(s) shall satisfy themselves as to value, size, condition, etc. prior to auction day. 10. The Auction Company, Seller or an Agent/Representative reserve the right to bid on behalf of themselves or a third party. Announcements made day of auction take precedence. 11. For convenience, this auction is being broadcast online. Neither the Auction Company nor the Seller is responsible for delay of signal or loss of signal by either side. 12. Bidder hereby agrees to sign/accept by electronic means, and that the electronic signature/acceptance shall have the same force and effect as an original signature.
Listing Details
Nice, Well-Cared-For Hay & Harvest Equipment Case IH MX150 & MX170 Tractors | Gleaner R62 Combines | Platform Headers JD Round Balers | NH Square Baler | H&S 14 Wheel Rake | Grain Cart Attachments & Implements | Assorted Pipe | Livestock Equip., Panels, & Fencing Upright Grain Bin | Fuel Tanks | Riding Mowers & Lawn Equip. | Sm. Engines Generators | Upright Air Compressor | Welder & Welding Table Many Tools, Shop Items, & MORE! ONLINE ONLY AUCTION Begins Closing at 6 PM on Thurs., April 4th, 2024 Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM Visit WigginsAuctioneers.com for photos, terms, & online bidding! Lynsie Sturgeon, Auction Mgr., 580.554.2633 Sellers: Bollman Ag, LLC

1
Preview & Pick Up Information
Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM

2
2001 Case IH MX170 with Loader
S/N: JJA0114703 Very Well Maintained, Always Shedded! Runs and Operates Great! Case IH L705 Loader with Joy Stick 5.9 Liter Cummins Engine Shows 8,711 +/- Hours MFWD with Differential Lock 540/1000 PTO Front Tire Size: 380/85R30 Rear Tire Size: 18.4...

3
1998 Gleaner R62 Combine
S/N: R6268152 Corn/Bean Special Package Well Maintained, Always Shedded 8.3 Cummins, Strong Engine 4825 Engine Hours 3555 +/- Separator Hours A/C Runs Cold Rotor and Cage in Good Shape Newer Accelerator Rolls Variable-Speed Feeder House Straw Chopper...

4
1994 Gleaner R62 Combine
S/N: R6264495L Meticulously Maintained, Always Shedded Extremely Clean Combine 2-Owner Combine 8.3 Cummins Engine Has Been Replaced 5862 +/- Engine Hours (Current Engine has Approx. 3000 +/- Hours) 4161 +/- Separator Hours A/C Runs Cold Tinted Windo...

5
1998 Case IH MX150 with Loader
S/N: JKA0454951 Euro Model Very Well Maintained 5.9 Cummins Engine Shows 2915 +/- Hours, Hour Meter Has Been Replaced (Unknown Hours) Stoll FZ 50.1 Self-Leveling Loader with Joy Stick MFWD with Differential Lock 540/1000 PTO Creeper Gear 3 Remotes Ac...

6
2002 Ram 2500 Service Truck
Mileage: 223,298 +/- 360 Engine 2WD New Tires Runs and Drives Well Transmission Shifts Smooth Tommy Lift Gate Solid Box, Good Doors

7
2004 John Deere 567 Baler
Well Maintained, Always Shedded Bale Count � 20,483 Mega-Wide Pick-Up Net and Twine 1000 PTO Less than 600 +/- Bales on New Belts Less than 500 +/- Bales on Complete New Pick-Up Newer Rims and Tires Complete New Wiring Harness Good, Reliable Bal...

8
2016 John Deere 569 Baler
S/N: E00569DTFG426010 Well Maintained, Always Shedded Bale Count � 16,470 Net Only 1000 PTO Harness and Monitor Fits Any Tractor Good Chains and Sprockets Several New Bearings New Main Drive Roller Good, Reliable Baler � Ready to Work!

9
2005 GMC 2500 with Flat Bed and Factory Bed
Mileage: 285,783 +/- Runs and Drives Transmission Shifts Smooth Solid Transfer Case Bed Hydraulics Work Well Comes with Factory Bed and Rear Bumper Has Had Engine Work Done New Fuel Pump Two New Tires

10
2018 Case IH DC163
S/N: HBJDC163HJN263908 Well Maintained 2018, Bought New in 2019 Has 4 Seasons On It Reliable Machine 16ft Discbine 1000 PTO Draw Bar Hitch

11
H&S High-Capacity 14-Wheel Rake
Older Rake with Some Welds High-Capacity Good Tires Ready to Work!

12
New Holland Hayliner 276
Well Maintained, Always Shedded! 540 PTO Nice Baler, Works Well

13
New Holland Hydraulic Basket Rake
All Metal Teeth, No Rubber Good Tires Ready to Work!

14
2004 Flicklin CA14000 Grain Cart
Well Maintained, Always Shedded! Hydraulic Folding Auger New Lower Auger and Bearings 1000 PTO Solid Bottom, No Holes or Rust Upgraded, Oversized Tires Tarp and Hardware (Has a couple of holes)

15
1994 Gleaner AGCO Model 400 Platform
Well Maintained, Always Shedded! Solid, Straight Header Single Pt Hook Up Ready to Work!

16
2003 MacDon 962
S/N: 153771 Meticulously Maintained, Always Shedded! 872 MacDon Adapter to Fit Gleaner Low-Acred Machine Good Tires 500 +/- Acres on New Sickle and Sickle Bar New Roller Bearings 2023 Includes Owner Manuals for Header and Adapter Field-Ready!

17
New Holland 1441 Parts Swather
Missing Cutter Bar Missing Front Half of Drive Line Everything else is there and straight Great Parts Machine!

18
John Deere 1600 Chisel
Approx. 24� Needs One Tire to Move

18
Shop-Built Hay Spike
Euro-Mount 3 Spikes Built to Handle Large Square Alfalfa

19
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

20
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

21
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

22
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

23
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

24
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

25
Mixed Pipe
2 3/8" & 2 7/8", some holes, some splits, various lengths, 19 pieces in total.



28
Complete Tub & Alley
Cut into 5 pieces, needs reassembly. Made out 2 3/8" pipe & heavy gauged sheet metal.


30
(3) Ranch Pro Cattle Gates
(2) approx. 12', (1) approx. 16'.

31
(4) Cattle Gates
Approx. (2) 12', (1) 8', (1) 4'. 3 gates are Ranch Pro.

32
Wire Cattle Panels
Approx. (4) 15', (1) 13'.

33
Wire Cattle Panels
Approx. (5) 16', (2) 12'.

34
WWII Runway Grate Panels
Approx. (6) 12' panels, (1) 8' panel.

35

36
(2) Metal Gates
(1) 12 ft Gate and (1) 3.5 ft Gate



39
(2) Heavy Gates Mounted on 4in. Pipe
(2) Heavy 2" Square Frame Metal Gates Mounted on 4" Pipe 4' 6" Hx 13' 1" L

40
(2) Heavy Metal Frame Gates
15.5' x 4.5' Heavy 2" Square Tubing Frame

41
(2) Cattle Panels
(1) 10' x 4' Panel (1) 11' x 4' 10" Panel

42
Heavy Cattle Panel
14' x 4.5' Panel

43
Heavy Cattle Panel
19' x 4' 1.5" Tubing, 6-Bar Panel



46
Heavy Cattle Panel
20' x 5' 10"






51
92 Gal. Fuel Tank with Tool Box
Fuel Tank with Tool Box, Needs New Fuel Pump 55" w x 32" d x 25" h Holds 92 Gallons

52
100 Gal. Metal Fuel Tank
100 Gal Metal Fuel Tank w/ Working Pump 45" w x 23" d x 24" h No Rust!

53
Heavy Duty Bucket and Grapple Attachment
Heavy Duty Bucket and Grapple Attachment Euro-Mount 8' w x 32" h x 34" d


55
John Deere Bale Flipper
John Deere Small Square Bale Flipper

56
Gleaner Lateral Tilt
Gleaner Lateral Tilt, Came off R62 Lot Includes a box of lateral tilt hardware




60
Shop Built 3-Point Hay Spike
Shop-Built 3-Point Hay Spike Built Heavy for Large-Square Alfalfa Bales Gooseneck Ball Stub Hitch

62
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 30.5L32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

63
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 24.5-32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

64
(2) Tractor Dual Tires
(2) Tractor Dual Tires Came Off John Deere 4440 Clamp-On Style Rims 20.8-34















79
(7) Galvanized C Purlin, Approx. 1" x 8" x 10'
(7) 1" x 8" x 10' Metal C Purlin


81
3-Tier Scaffolding on Wheels
3-Tier Scaffolding on Wheels Buyer Disassembles




85
Assorted Square Tubing
(4) 6" x 6" x 8.5' Heavy Wall Square Tubing (7) 4" x 4", Assorted Lengths Ranging 4' to 7.5'

86
Continental Belton 3-Point Post Hole Digger
Continental Belton 3-Point Post Hole Digger, 540 PTO


88
120 Bushel Upright, Cone-Bottom Grain Bin on Skids
120 Bushel Grain Bin on Skids Great Grain Bin, No Holes

89
B&W Trailer Hitch
B&W Trailer Hitch with Turn-Over Ball Came Out of 2005 GMC 2500


91
WeatherGuard Pick-Up Bed Tool Box
WeatherGuard Tool Box ONLY

92
TSC Aluminum Tool Box
TSC Tool Box ONLY

93
(2) 6" Grain Augers
The short auger is straight, the long auger is bent.












101
John Deere Baler Parts
Storage tub is included.



104
Columbia Vise
Approx. 4" wide jaw.

105
Metal Wall Cabinet
Approx. 25" tall, 6" deep, 34" wide.




109
Power Mate Air Tools
3/8" ratchet, 1 cutoff grinder, 3/8" impact. They do work.

110
(2) Pneumatic Air Tools
3/8" Craftsman air ratchet, 1 air hammer.


112
John Deere Cornhead Grease
Full case, 10 tubes.


114



117
(4) Jack Stands
Unknown brands.


119
Misc. Drive Shaft Yoke Parts
1 storage tub is included.







126
Misc. Car Parts
Oil filters, ignition coil, brake pads, fuel tank cap.





131
Elec. shop grinder on heavy stand (works)
Buyer is responsible for removal.






137
2 Belt Sanders
Craftsman & Unknown brand.

Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
4/4 Nice Hay & Harvest Equip | Livestock Equip | Shop Items
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Mar 5
Bidding Ends: Thursday Apr 4
Sale Location

Manchester, OK 73758
Listing Terms and Conditions
1. All bidders must be registered to bid, and will not be accepted without providing name, address, phone, and valid ID. By registering for the auction, bidder agrees to and accepts the terms and conditions of the auction set forth herein. 2. All items are being sold "As-Is, Where-Is". All sales are final. Bidders are encouraged to inspect items being sold and are solely responsible to satisfy themselves as to any inspections, current condition, usability, etc. prior to bidding. Buyer is solely responsible for the item upon the auctioneer stating "sold" or the "close" of auction. 3. PREVIEW: Fri., March 29th, 2024, 2-4PM 4. PAYMENT & TAX INFO: A 5% Buyer's Premium will be added to the high bid at auction to determine the purchase price. Acceptable forms of payment include cash, company/personal check, credit card, or wire transfer. . A 3% card convenience fee will be added to the invoice if paid by credit/debit card. No credit/debit cards will be accepted for items needing shipment. All items needing shipment must be paid in full by wire transfer only. All invoices must be paid in full prior to removal. In the event Buyer has not paid accordingly, the registered credit card shall be automatically processed on any unpaid balances, unless other arrangements have been made. Purchases are subject to city, county, and state sales tax, where applicable, unless Buyer provides appropriate exemption permit. 5. PICK UP/REMOVAL: Buyer pick up/removal date(s) and time(s): Fri., April 5th, 2024, 9AM-3PM. No load out shall be provided by the Seller or the Auction Company (BRING HELP & NECESSARY EQUIPMENT). Although we understand hardships and situations arise, we simply do not have the manpower or storage capacity for items which are not retrieved on designated pick up/removal date(s) and time(s). Please make every attempt to attend the above designated pick up/removal or send someone on your behalf. 6. FORFEITURE: In the event Buyer does not attend the designated pick up/removal, the Auction Company will make reasonable effort to arrange a separate scheduled date & time for Buyer to retrieve items; however, no guarantee is made by the Seller or the Auction Company. An additional fee may be assessed by the Auction Company for a separate scheduled pick up/removal. If items are not retrieved by 5 PM, Fri., April 19th, 2024, then Buyer automatically forfeits items and the Seller and/or Auction Company may dispose of the items at their sole discretion with no further liability to the Buyer. 7. SHIPPING INSTRUCTIONS (U.S. Only): Buyer is to notify Auction Company within 24 hours of close of auction, if shipping is needed. Upon payment in full by wire transfer only, Auction Company will deliver items less than 30# to local shipping company for shipment. Instructions and payment to shipping company for packaging, insurance, and shipping are Buyer's sole responsibility. The Auction Company is not responsible or liable for any issues arising from shipment. 8. UNPAID INVOICES: The Buyer agrees to pay all invoices and/or debts to Wiggins Auctioneers in accordance to the terms set forth herein. In the event such invoices and/or debts are not paid, there will be late charges accrued at the rate of 15% per year or the max interest allowed by law. Buyer also agrees to reimburse Wiggins Auctioneers for any attorney fees, collection fees, and/or costs incurred in order to collect any past due amounts or enforce the auction terms set forth herein. Venue for any litigation is agreed to be in Garfield County, Oklahoma. 9. All information is taken from sources believed to be reliable; however, no guarantee is made by the Auction Company nor the Seller. Buyer(s) shall satisfy themselves as to value, size, condition, etc. prior to auction day. 10. The Auction Company, Seller or an Agent/Representative reserve the right to bid on behalf of themselves or a third party. Announcements made day of auction take precedence. 11. For convenience, this auction is being broadcast online. Neither the Auction Company nor the Seller is responsible for delay of signal or loss of signal by either side. 12. Bidder hereby agrees to sign/accept by electronic means, and that the electronic signature/acceptance shall have the same force and effect as an original signature.
Nice, Well-Cared-For Hay & Harvest Equipment Case IH MX150 & MX170 Tractors | Gleaner R62 Combines | Platform Headers JD Round Balers | NH Square Baler | H&S 14 Wheel Rake | Grain Cart Attachments & Implements | Assorted Pipe | Livestock Equip., Panels, & Fencing Upright Grain Bin | Fuel Tanks | Riding Mowers & Lawn Equip. | Sm. Engines Generators | Upright Air Compressor | Welder & Welding Table Many Tools, Shop Items, & MORE! ONLINE ONLY AUCTION Begins Closing at 6 PM on Thurs., April 4th, 2024 Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM Visit WigginsAuctioneers.com for photos, terms, & online bidding! Lynsie Sturgeon, Auction Mgr., 580.554.2633 Sellers: Bollman Ag, LLC

1
Preview & Pick Up Information
Location: 30643 County Road 780, Manchester, OK 73758 Preview Date: Friday, March 29th, 2-4PM Pick Up/Removal Dates & Times: Friday, April 5th, 9AM-3PM

2
2001 Case IH MX170 with Loader
S/N: JJA0114703 Very Well Maintained, Always Shedded! Runs and Operates Great! Case IH L705 Loader with Joy Stick 5.9 Liter Cummins Engine Shows 8,711 +/- Hours MFWD with Differential Lock 540/1000 PTO Front Tire Size: 380/85R30 Rear Tire Size: 18.4...

3
1998 Gleaner R62 Combine
S/N: R6268152 Corn/Bean Special Package Well Maintained, Always Shedded 8.3 Cummins, Strong Engine 4825 Engine Hours 3555 +/- Separator Hours A/C Runs Cold Rotor and Cage in Good Shape Newer Accelerator Rolls Variable-Speed Feeder House Straw Chopper...

4
1994 Gleaner R62 Combine
S/N: R6264495L Meticulously Maintained, Always Shedded Extremely Clean Combine 2-Owner Combine 8.3 Cummins Engine Has Been Replaced 5862 +/- Engine Hours (Current Engine has Approx. 3000 +/- Hours) 4161 +/- Separator Hours A/C Runs Cold Tinted Windo...

5
1998 Case IH MX150 with Loader
S/N: JKA0454951 Euro Model Very Well Maintained 5.9 Cummins Engine Shows 2915 +/- Hours, Hour Meter Has Been Replaced (Unknown Hours) Stoll FZ 50.1 Self-Leveling Loader with Joy Stick MFWD with Differential Lock 540/1000 PTO Creeper Gear 3 Remotes Ac...

6
2002 Ram 2500 Service Truck
Mileage: 223,298 +/- 360 Engine 2WD New Tires Runs and Drives Well Transmission Shifts Smooth Tommy Lift Gate Solid Box, Good Doors

7
2004 John Deere 567 Baler
Well Maintained, Always Shedded Bale Count � 20,483 Mega-Wide Pick-Up Net and Twine 1000 PTO Less than 600 +/- Bales on New Belts Less than 500 +/- Bales on Complete New Pick-Up Newer Rims and Tires Complete New Wiring Harness Good, Reliable Bal...

8
2016 John Deere 569 Baler
S/N: E00569DTFG426010 Well Maintained, Always Shedded Bale Count � 16,470 Net Only 1000 PTO Harness and Monitor Fits Any Tractor Good Chains and Sprockets Several New Bearings New Main Drive Roller Good, Reliable Baler � Ready to Work!

9
2005 GMC 2500 with Flat Bed and Factory Bed
Mileage: 285,783 +/- Runs and Drives Transmission Shifts Smooth Solid Transfer Case Bed Hydraulics Work Well Comes with Factory Bed and Rear Bumper Has Had Engine Work Done New Fuel Pump Two New Tires

10
2018 Case IH DC163
S/N: HBJDC163HJN263908 Well Maintained 2018, Bought New in 2019 Has 4 Seasons On It Reliable Machine 16ft Discbine 1000 PTO Draw Bar Hitch

11
H&S High-Capacity 14-Wheel Rake
Older Rake with Some Welds High-Capacity Good Tires Ready to Work!

12
New Holland Hayliner 276
Well Maintained, Always Shedded! 540 PTO Nice Baler, Works Well

13
New Holland Hydraulic Basket Rake
All Metal Teeth, No Rubber Good Tires Ready to Work!

14
2004 Flicklin CA14000 Grain Cart
Well Maintained, Always Shedded! Hydraulic Folding Auger New Lower Auger and Bearings 1000 PTO Solid Bottom, No Holes or Rust Upgraded, Oversized Tires Tarp and Hardware (Has a couple of holes)

15
1994 Gleaner AGCO Model 400 Platform
Well Maintained, Always Shedded! Solid, Straight Header Single Pt Hook Up Ready to Work!

16
2003 MacDon 962
S/N: 153771 Meticulously Maintained, Always Shedded! 872 MacDon Adapter to Fit Gleaner Low-Acred Machine Good Tires 500 +/- Acres on New Sickle and Sickle Bar New Roller Bearings 2023 Includes Owner Manuals for Header and Adapter Field-Ready!

17
New Holland 1441 Parts Swather
Missing Cutter Bar Missing Front Half of Drive Line Everything else is there and straight Great Parts Machine!

18
John Deere 1600 Chisel
Approx. 24� Needs One Tire to Move

18
Shop-Built Hay Spike
Euro-Mount 3 Spikes Built to Handle Large Square Alfalfa

19
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

20
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

21
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

22
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

23
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

24
2 3/8" Pipe
No holes, no splits, 15 joints approx. 30-33" per joint.

25
Mixed Pipe
2 3/8" & 2 7/8", some holes, some splits, various lengths, 19 pieces in total.

26

27

28
Complete Tub & Alley
Cut into 5 pieces, needs reassembly. Made out 2 3/8" pipe & heavy gauged sheet metal.

29

30
(3) Ranch Pro Cattle Gates
(2) approx. 12', (1) approx. 16'.

31
(4) Cattle Gates
Approx. (2) 12', (1) 8', (1) 4'. 3 gates are Ranch Pro.

32
Wire Cattle Panels
Approx. (4) 15', (1) 13'.

33
Wire Cattle Panels
Approx. (5) 16', (2) 12'.

34
WWII Runway Grate Panels
Approx. (6) 12' panels, (1) 8' panel.

35

36
(2) Metal Gates
(1) 12 ft Gate and (1) 3.5 ft Gate

37

38

39
(2) Heavy Gates Mounted on 4in. Pipe
(2) Heavy 2" Square Frame Metal Gates Mounted on 4" Pipe 4' 6" Hx 13' 1" L

40
(2) Heavy Metal Frame Gates
15.5' x 4.5' Heavy 2" Square Tubing Frame

41
(2) Cattle Panels
(1) 10' x 4' Panel (1) 11' x 4' 10" Panel

42
Heavy Cattle Panel
14' x 4.5' Panel

43
Heavy Cattle Panel
19' x 4' 1.5" Tubing, 6-Bar Panel

44

45

46
Heavy Cattle Panel
20' x 5' 10"

47

48

49

50

50

51
92 Gal. Fuel Tank with Tool Box
Fuel Tank with Tool Box, Needs New Fuel Pump 55" w x 32" d x 25" h Holds 92 Gallons

52
100 Gal. Metal Fuel Tank
100 Gal Metal Fuel Tank w/ Working Pump 45" w x 23" d x 24" h No Rust!

53
Heavy Duty Bucket and Grapple Attachment
Heavy Duty Bucket and Grapple Attachment Euro-Mount 8' w x 32" h x 34" d

54

55
John Deere Bale Flipper
John Deere Small Square Bale Flipper

56
Gleaner Lateral Tilt
Gleaner Lateral Tilt, Came off R62 Lot Includes a box of lateral tilt hardware

57

58

59

60
Shop Built 3-Point Hay Spike
Shop-Built 3-Point Hay Spike Built Heavy for Large-Square Alfalfa Bales Gooseneck Ball Stub Hitch

62
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 30.5L32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

63
(2) Gleaner Combine Tires and Rims
(2) Gleaner Combine Tires and Rims 24.5-32 Tires Hold Air, But Bad Dry Rot Good, Straight Rims

64
(2) Tractor Dual Tires
(2) Tractor Dual Tires Came Off John Deere 4440 Clamp-On Style Rims 20.8-34

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79
(7) Galvanized C Purlin, Approx. 1" x 8" x 10'
(7) 1" x 8" x 10' Metal C Purlin

80

81
3-Tier Scaffolding on Wheels
3-Tier Scaffolding on Wheels Buyer Disassembles

82

83

84

85
Assorted Square Tubing
(4) 6" x 6" x 8.5' Heavy Wall Square Tubing (7) 4" x 4", Assorted Lengths Ranging 4' to 7.5'

86
Continental Belton 3-Point Post Hole Digger
Continental Belton 3-Point Post Hole Digger, 540 PTO

87

88
120 Bushel Upright, Cone-Bottom Grain Bin on Skids
120 Bushel Grain Bin on Skids Great Grain Bin, No Holes

89
B&W Trailer Hitch
B&W Trailer Hitch with Turn-Over Ball Came Out of 2005 GMC 2500

90

91
WeatherGuard Pick-Up Bed Tool Box
WeatherGuard Tool Box ONLY

92
TSC Aluminum Tool Box
TSC Tool Box ONLY

93
(2) 6" Grain Augers
The short auger is straight, the long auger is bent.

94

95

96

97

98

99

100

100

100

100

100

101
John Deere Baler Parts
Storage tub is included.

102

103

104
Columbia Vise
Approx. 4" wide jaw.

105
Metal Wall Cabinet
Approx. 25" tall, 6" deep, 34" wide.

106

107

108

109
Power Mate Air Tools
3/8" ratchet, 1 cutoff grinder, 3/8" impact. They do work.

110
(2) Pneumatic Air Tools
3/8" Craftsman air ratchet, 1 air hammer.

111

112
John Deere Cornhead Grease
Full case, 10 tubes.

113

114

115

116

117
(4) Jack Stands
Unknown brands.

118

119
Misc. Drive Shaft Yoke Parts
1 storage tub is included.

120

121

122

123

124

125

126
Misc. Car Parts
Oil filters, ignition coil, brake pads, fuel tank cap.

127

128

129

130

131
Elec. shop grinder on heavy stand (works)
Buyer is responsible for removal.

132

133

134

135

136

137
2 Belt Sanders
Craftsman & Unknown brand.