Chuck Milks Retirement Online Auction
Listing ID#: 678805

Sale Location

Little Valley, NY 14755
Sale Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Apr 9
Bidding Ends: Thursday Apr 11
Sale Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Mike Peterson Auction and Realty Service

Contact: Mike Peterson
Phone: 716-665-0668
Email: peteauction@hotmail.com
Website: petersonauction.com

EstateSale.com ID#: 9025
View company information and listings

Free Email Notifications

Sign up for the EstateSale.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Online Only Auction

All items sold to the highest bidder without reserve

10% Buyer's Premium

All Items sold "AS IS WHERE IS" with no warrantee on condition or authenticity

PAYMENT ACCEPTED: Cash, Certified Funds,
Master Card, Visa, Discover, Debit Card, American Express with additional 3.5% BP

Complete Auction Terms on bidding web page
Listing Information
Chuck Milks Retirement Online Auction

Bidding Opens: Tuesday, April 9th @ 9AM

Preview: Wednesday, April 10th 4PM-6PM

Bidding Begins to Close: Thursday, April 11th @ 6PM

Pick-Up: Friday, April 12th 12PM-6PM

Visit our website to register and bid PetersonAuction.com

Auciton Includes:

1
Case International 885
Hours: 3433.6 HP: 84 Engine / Fuel: 4.4 cylinder Diesel 4wd/2wd: 2wd Transmission: 16 speed Attachments, Notes: Case 2250 Mount-O- Matic 6 ft. bucket and rear wheel weights 3 point hitch and 540 PTO

2
Toyota Forklift
Model: 42-6FGCU15 Serial#: 64366 Hours: 33,202 Approximate weight: 6200 lbs Max lift capacity: 3000 lbs Tilt and Side Shift 42 inch Forks With owners manual

3
2016 Polaris Sportsman 450 H.D. EFI
S/N: 4XASEE457GA585264 Hours: 132 hrs/564 miles Title: NY Transferable registered Engine / Fuel: 450 gas Transmission: 4 WD Has front winch (but not wired in), gun holders, trickle charger, and a Cabela's storage/ rear seat

4
Kubota ZD 331LP
S/N: 17334 Hours: 1075.2 Engine/Fuel: Kubota 3 cylinder Diesel Transmission: Hydrostatic Mower Deck: 72 in. Comes with extra fuel, transmission and oil filters.

5
Pull-Behind Tigercat Generator
4 cylinder Gasoline engine, 3-phase, 240 V pull-behind. Overall Dimensions are 105 in. L x 64 in. W x 74 in. H Starts/Runs but do not know if it generates power.

6
Karcher HDS 4.0/20 Professional Pressure Washer
220 volt Has reservoir for chemicals and heat adjustment for water temperature

7
Kubota ZD18F
S/N: 41112 Hours: 618 Engine/Fuel: Kubota 3 Cylinder Diesel Transmission: Hydrostatic Mower Deck: 58 inch Comes with fuel and oil filter

8
Viking Thermal Arc 250GM Welder
Comes with Miller Spoolmate and SGA100 Adapter

9
Lincoln IdealArc 250 Welder
220 volt Comes with extra clamp and welding sticks

10
Hypertherm Powermax 1000 Plasma Arc Welder
220 volt G3 series Number 083169 Serial # 083169 Comes with helmet and some extras Cart not included!

11
900 Gallon Diesel Fuel Tank
128 inches long by 48 inches across. Has platform on Front of Skids. Had Non Highway Diesel in it. Gas Boy Pump is wired 110V AC with 3 Prong Plug. Does turn on. You have one week from purchase to remove this tank.

12
300 Gallon Gasoline Tank
Fill-Rite FR701V Pump 62 inches long by 32inches wide

13
Bush Hog RTH80 Rototiller
Serial#: 12-10652 80 inches wide

14
900 Gallon Diesel Tank
Gas Boy 110V AC Pump. 128 inches long by 48 inches wide. Was filled with Highway Diesel Fuel. You have one week to remove from close of auction.

15
International Harvester F M
S/N: FBK106130 HP: 38 hp Engine / Fuel: 4 cylinder gas 4wd/2wd: 2wd Attachments, Notes: Has rear wheel weights. 540 PTO Comes with wide front end.

16
3 point hitch post hole digger
Comes with 12 in. auger

17
Kalamazoo Metal Bandsaw
24 inch Throat. Extra Morse Blades. 220V single phase

18
DS Stoves Wood Stove
Kozy King model# 300-09/400-09 Serial# 000707 Mfg date 8/14 Has electric blower motor. Stove dimensions are 23 in. W x 60 in. D x 84 in. H Comes with Chimney sweeping heads.

19
Ingersoll Rand T30 2 stage air compressor
230 volt single phase 7.5 hp. Model # 2475N75 Serial# 30TC876876 Reserve air tank behind is not included.

19
Air reserve tank on rolling cart
Approximately 200 gallon reserve tank Approximately 71 in. L x 28 in. Diameter Stands approximately 90 in. H with cart Air compressor Not included!

20
International 550 Manure spreader
International 550 Manure spreader, converted to a wood wagon. No PTO or Manure kicker. Pull behind. 92in width, 209in overall length.

21
International 550 Manure Spreader
Used as a pull behind wood wagon. No PTO connection or manure kicker. Tires are bald. Overall dimensions are 209 in. L x 92 in. W

22
New Holland 185 Manure spreader
New Holland 185 Manure spreader, missing the Manure kicker, used as a wood wagon. 265in length, 95 1/2 width.

23
International Case 550 Manure Spreader
Used as a pull behind wood wagon. Has no PTO or manure kicker Overall dimensions are 223 in. L x 95 in. W

24
Trailer
Metal frame with a wooden bed. Bed dimensions are 170 in. L x 73.5 in. W Overall dimensions are 220 in. L x 89.25 in. W Has a drop down gate that is 48 in. L Has NO title

25
Farmland gate
Approximately 165.25 in. W x 49 in. H

26
3 point hitch Box blade
Overall dimensions are 97.5 in. W x 24.25 in. L

27
Wooden Hay Wagon
Central Tractor Running Gear 8ft wide x 15-1/2ft Long. We will get it pulled to the driveway. Will need tires.



30
Husqvarna 650RTT Rototiller
6.5 HP Briggs & Stratton engine.

31



34
Craftsman Edger and Agri-Fab Broadcast Spreader
Edger is 3.8 HP Model# 536.772210 Braodcaster Model # 45-02114

35
New Cub Cadet 4 ft. Aerator
Pull behind Serial# 08007105


37
2 Portable water hose reels with hoses
Larger 4 wheel cart has 2 hoses connected to make 1. Approximately 50 ft. of hose on it.

38
Cub Cadet kid's tricycle and pull behind wagon
Wagon bed is 48 in. L x 23 in. W x 2.5 in. H (tires need air)


40
Portable Garden Hose reel with hose and cart
4 wheel reel (wheels need air) has approximately 100 ft hose. Ground work cart bed approximately 4ft. L x 2 ft. W x 10 in. D

41
International Rolling Tool cart and floor jack
Cart is 27.25 in. W x 19 in. D x 32.75 in. H Overall width with side up is 56.25 in.

42
Ridgid 300 Pipe Cutter/ Threader
Comes on a steel rolling cart Overall approximate dimensions are 40 in. L x 20.5 in. W x 52 in. H Serial# 7540024

43
2 Metal Rolling Shelves
Approximate dimensions of both are 48 in. L x 18 in. W x 40 in. H



46
Over a Case of grease and some grease fittings
You are getting 54 tubes of grease.

47
2 Forklift chargers
Clarke Model# 40514A 120v/15A Power Cat Model# 18790-74 120v/ 10.5A Unsure if work- nothing to test on.



50
2 pieces 8 in. Pipe
1 piece is 101.5 in. L The other is 126 in. L (has 1/4 in. Walls.

51
18 C Clamps
18 C Clamps total, sizes ranging from 3in up to 12in. Jorgensen clamp, ductile iron clamps, Armstrong, deep throat clamps.

52
Signode Bander
Signode Bander cart with 4 spools of banding. Crimper and cutter included. 26in banding wheel.

53
Pacific Trash Pump
Pacific trash pump, 3in hard suction hose, with 25ft discharge hose, 2 strainers, LCT 208 series engine. Serial# PTPK03185

54
32ft aluminum extension ladder
32ft aluminum extension ladder

55
2 pairs of Rigid bolt cutters
2 pairs of Rigid bolt cutters, 1 pair is 36in, and the other is 24in.

56
Bolt cutters and tire irons
3 pairs of bolt cutters, 2 18in cutters and 1 36in paid. 3 Tire irons, 2 are 36in and 1 is 24in.

57
Misc lights and semi truck parts
Misc semi tail lights, amber and red lens covers, and semi truck parts, truck mirrors, convex mirrors, lug nut caps for semis.

58
16 step aluminum stair case
16ft aluminum stair case.

59
Misc Angle Iron
1, 98in angle iron 3in wide. 2, 106in 4in wide angle iron. 1, 241in angle iron 1in wide, 200in piece of heavy iron 4in wide, 41in heavy iron plate steel with rounded edges. 1 sheet of plate steel 69in � 48in � 1/8in thick.

60
Plywood and saw horses
2 sheets of 8�4 1/4in plywood, 1 sheet of 8�4 1/2in, 5 saw horses, 6 pieces of misc boards treated and not treated, 8ft 10ft and 12ft various sizes. (Contents of saw horses and plywood not included).

61
11 pieces gas black and 2 pieces galvanized
Black pipe is 10 ft. L x 1in. D each Galvanized is 21 ft. L x 1 in. D each And 1 piece of Rebar also included.

62
50 ton Shop press
Hand hydraulic press 43 in. L x 13 in. W x 65.5 in. H


64
1/2 in. Drive Impact sockets
Craftsman 3/8-11/6 in. (15/16 socket missing) Sunex socket set (30, 32, 34, 36mm) And unknown brand sockets

65
20 8�8�3 Glass Blocks
20 8�8�3 Glass Blocks wave design.

66
SK socket sets 1/4 Drive 3/8 Drive
SK socket sets 1/4 Drive 3/8 Drive. Both are complete sets.

67
Craftsman socket sets and impact sockets
Craftsman socket set 1/2 drive and 1/4 drive, missing 3/8 rachet and a few othe sockets and screw bits. Craftsman 12 piece 1/4 drive set complete. Craftsman impact sockets,12mm to 27mm.

68
2 Palmgren Vises
Bases are 10.75 in. L x 9.5 in. W Jaws are 6 in.

69
Tap set, Allen Hex Key Set, snap ring pliers
SAE Tap set and rethreading dies, Cummins pro allen Hex Key Set, OTC stinger snap ring pliers set.

70
Craftsman 6 x 9 in. Belt and Disc Sander
Model # 351.217570 Approximately 31 in. L x 22 in. W x 16 in. H

71
7 Bottle Jacks, 2 utility trailer jacks
7 Bottle Jacks, 1, 20ton bottle jack. 2, 10ton bottle jacks. 3, 2 ton bottle jacks, 2 misc utility trailer jacks. 1 tire iron, 4 bottle jack bars.

72
Hand tools
Push brooms, shovels, sledge hammers, mop bucket

73
Pry bars
Various pry bars and crows. Largest is 68 in. L

74
Misc open end wrenches
Misc open end wrenches Standard and Metric, Armstrong, Cummins, craftsman, taiwan, etc.

75
Oil pumps/canisters and grease guns
Pneumatic oil pump and grease gun and 2 hand pumps and manual grease gun

76
Proto tool open end and ratcheting wrenches
Proto tool open end metric and standard wrenches and standard ratcheting wrenches.

77
Packard Heavy Duty Drill Press
Bench top drill press on homemade stand. 110 volt. 3/4 hp. Model# 918 Serial# 20176 Base is 34 in. X 34 in. Height is 67.5 in.

78
Misc Power tool lot
Misc power tool lot, Rockwell 1/2in drill model 7553, AEG drill SB2E 16 RL, 1/2in eletric drill no name, Makita 180mm Polisher model# 9218PB, Metabo wheel grinder model# W8-115, Black and Decker saw cat saw.


80
Milwaukee power tool lot
Milwaukee power tools, Curcular Saw 7 1/4 in w/case, Hand Grinder 4 1/2in, jig saw, 3/8 10mm reversing drill.

81
Wire lot
1/0 gauge, 2/0 gauge, and other various wire

82
Saw blade, cutting wheels, 3M sanding heads
Diablo 12" Saw blade, 9in, 7in, 4 1/2 misc cutting/grinding wheels, 3M sanding heads. And of course Saftey glasses.

83
Ingersoll Rand Pneumatic tools
Ratchet, 2 impacts, chisel, grinders and air tool oil

84
3 Lincoln power luber
2, 12volt Lincoln Battery operated grease guns, 1, 18volt Lincoln grease gun. With charging stations and 5 extra batteries.

85
Engine Hoist and Engine stand
3 ton Engine Hoist and Engine stand only.

86
Battery charger Heavy Duty
Associated Heavy duty battery charger, 280AMP, 12V. Model 6006. With extra battery terminals with misc connectors.

87
Ingersoll Rand Battery power tools
Ingersoll Rand Battery power tools. 1, 20V Lithium Ion IQ Series 1/2 drive impact w/charging station. 1, 20V Lithium Ion Cordless Drill/Driver w/charging station and 1 extra battery.

88
Snap-On impact Gun, snap-on impact sockets
Snap-On 1/2 pneumatic impact Gun, all 22 snap-on impact sockets. 7/16 up to 1-1/2in

89
Pneumatic tools
Mac impact, Central Pneumatic ratchet, new Paramount Pneumatic angle head drill, unknown ratchet, sander, grinder and drill

90
Propane torches, propane, butane lighter/butane
Some bottles of propane are unused. Turboskill turbotorch and Bernzomatic TS4000 torches

91
Ingersoll Rand Cordless tools
2- 1/2 in. IQV 192 drill/drivers 1- 1/2in. IQV144 ratchet wrench 1-spare battery And charger

92
Snap-On Sockets, Rethreader Taps, Extensions
1 Mac Wrench and 1 OTC Thread Cleaner tool. Rest are Snap On snapon

93
Automotive air hose and hose clamps
Lot of various sized clamps and brass fittings and various sized air line.

94
SK sockets and proto tools
SK tools Impact sockets, regular sockets, Metrics and standard. 2 1/2in drive SK 17in long brakes bars. 1 SK Rachet 1/2 drive 15in long. And 1 proto 1/2 drive 10in long rachet. Multiple 3/8 extensions different lengths.

95
Hardware lot
Various types of screws, washers, bolts, nuts, nails, lock washers, lag screws and more Includes storage bins.

96
Snap-On 1/2 inch Ratchet and Sockets
Snap on 1-3/16 to 1-1/2 inch 1/2 Drive Sockets and Snapon SL715 Ratchet

97
4 Crescent Wrenches
4in Cresent, 6in Cresent SK, 10in Cresent, 12in Cresent. All made in the USA.

98
11 Misc open end adjustable wrenches
1, 15in wrench. 2, 12in wrenches. 2, 10in wrenches. 5, 8in wrenches, and 1, 6in wrench.

99
Automotive bearing puller, Proto slide Hammer
Proto slide hammer, bearing puller with musc fittings l, steering wheel puller, pilot bearing puller.


101
Pliers, wire cutters, and more
Numerous sets of pliers, wire cutters, needlenose, seal removers, retaining clamp and snap ring tools


103
Ratcheting Wrenches
Craftsman, Armstrong, Proto, Gear Wrench


105
Dewalt Saw and Drill. Extra Blades
Corded Saw, Cordless Drill with 3 Batteries. Milwaukee Blades

106
Welding Vise grips
8 different pair.

107
Mac Gear Separator and Lisle Camshaft Tool
Mac Gear and Bearing Separator PB900B and Lisle 18000 Camshaft Bearing Tool

108
2 wooden picnic tables
Octagon table with benches Table is 56 in. Diameter x 30 in. H Benches are 18 in. H Rectangular table is 8 ft. L x 5 ft. W. Top is 29.5 in. W


110
Misc Hammer Lot
Multiple different use hammers, welding chipper hammer, 2 hachets, rubber mallet, dead blow hammer, 12 ball peen hammers, 8 carpenter hammers.

111
Misc tractor parts, hydraulic valves
JD1600 Rim W41328P25J. 3 hydraulic valves, 3000PSI Nortrac arm 16in long stroke, 1in pins, 2in Bore. 1 misc hydraulic arm 31 1/2 stroke, 41 in overall. Barn cleaner corner wheel, cattle prod.

112
Misc auto parts, misc electrical hardware
Misc auto parts, misc electrical hardware, wire nuts, wire ends, misc new spark plugs, (4) 12in wiper blades. Terminal, terminal nipples, auto light bulb, electrical tape.

113

114
Creepers, shop lights, air hose, used oil catch
3 Creepers, 2 shop lights, (6) 4ft shop light bulbs, (8) 8ft shop light bulbs, 50ft shop air hose with reel, used oil drain container, 2 fluid funnels.

115
2 Torque rachets
(1) SK 13in 3/8 drive torque rachet, (1) 18in 1/2 drive torque rachet. W/case.

116
Large Screwdriver Lot
Stanley, Milwaukee, others

117
Axle Bearing Sockets and oil filter wrenches
Various sized 3/4 in. Sockets by APS and other various manufacturers from 2 3/32- 4 7/8. 5 different oil filter wrenches


119
1/2 inch sockets
Craftsman and other various manufacturers. Over 75 sockets.

120
1/2 inch Drives, extensions and speed ratchets
Craftman and other various manufacturers. 9 ratchets, 2 braker bars, 2 speed ratchets and several extensions.

121
1/4 and 1/2 sockets and drivers and more
Craftsman and various other manufacturers. Over 50 pieces!

122
SK 3/4 INCH Driver, extensions, sockets and other
SK driver, 2, extensions and 3 sockets. Plus unknown driver, 5 sockets and reducer


124
Multiple meters, test light, timing gun
Multiple meters, test light, KAL timing gun model L-10. Term a nut wire connectors, battery tester, engine vacuum fuel pressure gauge, micranta power module, curcut tester.



127
24in Expert Charchol Grill
24in Expert Charchol Grill, with 24lbs of charcoal. 42in in height, 44in overall width. Missing 1 burner grate.

128
Misc tool lot
Misc tool lot, wood saw, files, putty knife, KD tool wedge, torch tips, choke, etc. W/table

129
Retriever dog house
Retriever dog house with ground tie down. 44in wide, 31in depth, 34in in height. With hinged lid.

130
Kitchen Aid Charchol Grill
Kitchen aid Charchol Grill, with Charchol lighter and Charchol lighter fluid. 60 in overall width, 30in grill width, 51in height with smoke stack, 29in depth.
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Chuck Milks Retirement Online Auction

Mike Peterson Auction and Realty Service

Mike Peterson Auction and Realty Service


Contact: Mike Peterson
Phone: 716-665-0668
Sale Location
5036 Allegany Rd.
Little Valley, NY 14755
Sale Dates and Times
Sale Terms and Conditions
Online Only Auction All items sold to the highest bidder without reserve 10% Buyer's Premium All Items sold "AS IS WHERE IS" with no warrantee on condition or authenticity PAYMENT ACCEPTED: Cash, Certified Funds, Master Card, Visa, Discover, Debit Card, American Express with additional 3.5% BP Complete Auction Terms on bidding web page
Listing Details
Chuck Milks Retirement Online Auction

Bidding Opens: Tuesday, April 9th @ 9AM

Preview: Wednesday, April 10th 4PM-6PM

Bidding Begins to Close: Thursday, April 11th @ 6PM

Pick-Up: Friday, April 12th 12PM-6PM

Visit our website to register and bid PetersonAuction.com

Auciton Includes:

1
Case International 885
Hours: 3433.6 HP: 84 Engine / Fuel: 4.4 cylinder Diesel 4wd/2wd: 2wd Transmission: 16 speed Attachments, Notes: Case 2250 Mount-O- Matic 6 ft. bucket and rear wheel weights 3 point hitch and 540 PTO

2
Toyota Forklift
Model: 42-6FGCU15 Serial#: 64366 Hours: 33,202 Approximate weight: 6200 lbs Max lift capacity: 3000 lbs Tilt and Side Shift 42 inch Forks With owners manual

3
2016 Polaris Sportsman 450 H.D. EFI
S/N: 4XASEE457GA585264 Hours: 132 hrs/564 miles Title: NY Transferable registered Engine / Fuel: 450 gas Transmission: 4 WD Has front winch (but not wired in), gun holders, trickle charger, and a Cabela's storage/ rear seat

4
Kubota ZD 331LP
S/N: 17334 Hours: 1075.2 Engine/Fuel: Kubota 3 cylinder Diesel Transmission: Hydrostatic Mower Deck: 72 in. Comes with extra fuel, transmission and oil filters.

5
Pull-Behind Tigercat Generator
4 cylinder Gasoline engine, 3-phase, 240 V pull-behind. Overall Dimensions are 105 in. L x 64 in. W x 74 in. H Starts/Runs but do not know if it generates power.

6
Karcher HDS 4.0/20 Professional Pressure Washer
220 volt Has reservoir for chemicals and heat adjustment for water temperature

7
Kubota ZD18F
S/N: 41112 Hours: 618 Engine/Fuel: Kubota 3 Cylinder Diesel Transmission: Hydrostatic Mower Deck: 58 inch Comes with fuel and oil filter

8
Viking Thermal Arc 250GM Welder
Comes with Miller Spoolmate and SGA100 Adapter

9
Lincoln IdealArc 250 Welder
220 volt Comes with extra clamp and welding sticks

10
Hypertherm Powermax 1000 Plasma Arc Welder
220 volt G3 series Number 083169 Serial # 083169 Comes with helmet and some extras Cart not included!

11
900 Gallon Diesel Fuel Tank
128 inches long by 48 inches across. Has platform on Front of Skids. Had Non Highway Diesel in it. Gas Boy Pump is wired 110V AC with 3 Prong Plug. Does turn on. You have one week from purchase to remove this tank.

12
300 Gallon Gasoline Tank
Fill-Rite FR701V Pump 62 inches long by 32inches wide

13
Bush Hog RTH80 Rototiller
Serial#: 12-10652 80 inches wide

14
900 Gallon Diesel Tank
Gas Boy 110V AC Pump. 128 inches long by 48 inches wide. Was filled with Highway Diesel Fuel. You have one week to remove from close of auction.

15
International Harvester F M
S/N: FBK106130 HP: 38 hp Engine / Fuel: 4 cylinder gas 4wd/2wd: 2wd Attachments, Notes: Has rear wheel weights. 540 PTO Comes with wide front end.

16
3 point hitch post hole digger
Comes with 12 in. auger

17
Kalamazoo Metal Bandsaw
24 inch Throat. Extra Morse Blades. 220V single phase

18
DS Stoves Wood Stove
Kozy King model# 300-09/400-09 Serial# 000707 Mfg date 8/14 Has electric blower motor. Stove dimensions are 23 in. W x 60 in. D x 84 in. H Comes with Chimney sweeping heads.

19
Ingersoll Rand T30 2 stage air compressor
230 volt single phase 7.5 hp. Model # 2475N75 Serial# 30TC876876 Reserve air tank behind is not included.

19
Air reserve tank on rolling cart
Approximately 200 gallon reserve tank Approximately 71 in. L x 28 in. Diameter Stands approximately 90 in. H with cart Air compressor Not included!

20
International 550 Manure spreader
International 550 Manure spreader, converted to a wood wagon. No PTO or Manure kicker. Pull behind. 92in width, 209in overall length.

21
International 550 Manure Spreader
Used as a pull behind wood wagon. No PTO connection or manure kicker. Tires are bald. Overall dimensions are 209 in. L x 92 in. W

22
New Holland 185 Manure spreader
New Holland 185 Manure spreader, missing the Manure kicker, used as a wood wagon. 265in length, 95 1/2 width.

23
International Case 550 Manure Spreader
Used as a pull behind wood wagon. Has no PTO or manure kicker Overall dimensions are 223 in. L x 95 in. W

24
Trailer
Metal frame with a wooden bed. Bed dimensions are 170 in. L x 73.5 in. W Overall dimensions are 220 in. L x 89.25 in. W Has a drop down gate that is 48 in. L Has NO title

25
Farmland gate
Approximately 165.25 in. W x 49 in. H

26
3 point hitch Box blade
Overall dimensions are 97.5 in. W x 24.25 in. L

27
Wooden Hay Wagon
Central Tractor Running Gear 8ft wide x 15-1/2ft Long. We will get it pulled to the driveway. Will need tires.



30
Husqvarna 650RTT Rototiller
6.5 HP Briggs & Stratton engine.

31



34
Craftsman Edger and Agri-Fab Broadcast Spreader
Edger is 3.8 HP Model# 536.772210 Braodcaster Model # 45-02114

35
New Cub Cadet 4 ft. Aerator
Pull behind Serial# 08007105


37
2 Portable water hose reels with hoses
Larger 4 wheel cart has 2 hoses connected to make 1. Approximately 50 ft. of hose on it.

38
Cub Cadet kid's tricycle and pull behind wagon
Wagon bed is 48 in. L x 23 in. W x 2.5 in. H (tires need air)


40
Portable Garden Hose reel with hose and cart
4 wheel reel (wheels need air) has approximately 100 ft hose. Ground work cart bed approximately 4ft. L x 2 ft. W x 10 in. D

41
International Rolling Tool cart and floor jack
Cart is 27.25 in. W x 19 in. D x 32.75 in. H Overall width with side up is 56.25 in.

42
Ridgid 300 Pipe Cutter/ Threader
Comes on a steel rolling cart Overall approximate dimensions are 40 in. L x 20.5 in. W x 52 in. H Serial# 7540024

43
2 Metal Rolling Shelves
Approximate dimensions of both are 48 in. L x 18 in. W x 40 in. H



46
Over a Case of grease and some grease fittings
You are getting 54 tubes of grease.

47
2 Forklift chargers
Clarke Model# 40514A 120v/15A Power Cat Model# 18790-74 120v/ 10.5A Unsure if work- nothing to test on.



50
2 pieces 8 in. Pipe
1 piece is 101.5 in. L The other is 126 in. L (has 1/4 in. Walls.

51
18 C Clamps
18 C Clamps total, sizes ranging from 3in up to 12in. Jorgensen clamp, ductile iron clamps, Armstrong, deep throat clamps.

52
Signode Bander
Signode Bander cart with 4 spools of banding. Crimper and cutter included. 26in banding wheel.

53
Pacific Trash Pump
Pacific trash pump, 3in hard suction hose, with 25ft discharge hose, 2 strainers, LCT 208 series engine. Serial# PTPK03185

54
32ft aluminum extension ladder
32ft aluminum extension ladder

55
2 pairs of Rigid bolt cutters
2 pairs of Rigid bolt cutters, 1 pair is 36in, and the other is 24in.

56
Bolt cutters and tire irons
3 pairs of bolt cutters, 2 18in cutters and 1 36in paid. 3 Tire irons, 2 are 36in and 1 is 24in.

57
Misc lights and semi truck parts
Misc semi tail lights, amber and red lens covers, and semi truck parts, truck mirrors, convex mirrors, lug nut caps for semis.

58
16 step aluminum stair case
16ft aluminum stair case.

59
Misc Angle Iron
1, 98in angle iron 3in wide. 2, 106in 4in wide angle iron. 1, 241in angle iron 1in wide, 200in piece of heavy iron 4in wide, 41in heavy iron plate steel with rounded edges. 1 sheet of plate steel 69in � 48in � 1/8in thick.

60
Plywood and saw horses
2 sheets of 8�4 1/4in plywood, 1 sheet of 8�4 1/2in, 5 saw horses, 6 pieces of misc boards treated and not treated, 8ft 10ft and 12ft various sizes. (Contents of saw horses and plywood not included).

61
11 pieces gas black and 2 pieces galvanized
Black pipe is 10 ft. L x 1in. D each Galvanized is 21 ft. L x 1 in. D each And 1 piece of Rebar also included.

62
50 ton Shop press
Hand hydraulic press 43 in. L x 13 in. W x 65.5 in. H


64
1/2 in. Drive Impact sockets
Craftsman 3/8-11/6 in. (15/16 socket missing) Sunex socket set (30, 32, 34, 36mm) And unknown brand sockets

65
20 8�8�3 Glass Blocks
20 8�8�3 Glass Blocks wave design.

66
SK socket sets 1/4 Drive 3/8 Drive
SK socket sets 1/4 Drive 3/8 Drive. Both are complete sets.

67
Craftsman socket sets and impact sockets
Craftsman socket set 1/2 drive and 1/4 drive, missing 3/8 rachet and a few othe sockets and screw bits. Craftsman 12 piece 1/4 drive set complete. Craftsman impact sockets,12mm to 27mm.

68
2 Palmgren Vises
Bases are 10.75 in. L x 9.5 in. W Jaws are 6 in.

69
Tap set, Allen Hex Key Set, snap ring pliers
SAE Tap set and rethreading dies, Cummins pro allen Hex Key Set, OTC stinger snap ring pliers set.

70
Craftsman 6 x 9 in. Belt and Disc Sander
Model # 351.217570 Approximately 31 in. L x 22 in. W x 16 in. H

71
7 Bottle Jacks, 2 utility trailer jacks
7 Bottle Jacks, 1, 20ton bottle jack. 2, 10ton bottle jacks. 3, 2 ton bottle jacks, 2 misc utility trailer jacks. 1 tire iron, 4 bottle jack bars.

72
Hand tools
Push brooms, shovels, sledge hammers, mop bucket

73
Pry bars
Various pry bars and crows. Largest is 68 in. L

74
Misc open end wrenches
Misc open end wrenches Standard and Metric, Armstrong, Cummins, craftsman, taiwan, etc.

75
Oil pumps/canisters and grease guns
Pneumatic oil pump and grease gun and 2 hand pumps and manual grease gun

76
Proto tool open end and ratcheting wrenches
Proto tool open end metric and standard wrenches and standard ratcheting wrenches.

77
Packard Heavy Duty Drill Press
Bench top drill press on homemade stand. 110 volt. 3/4 hp. Model# 918 Serial# 20176 Base is 34 in. X 34 in. Height is 67.5 in.

78
Misc Power tool lot
Misc power tool lot, Rockwell 1/2in drill model 7553, AEG drill SB2E 16 RL, 1/2in eletric drill no name, Makita 180mm Polisher model# 9218PB, Metabo wheel grinder model# W8-115, Black and Decker saw cat saw.


80
Milwaukee power tool lot
Milwaukee power tools, Curcular Saw 7 1/4 in w/case, Hand Grinder 4 1/2in, jig saw, 3/8 10mm reversing drill.

81
Wire lot
1/0 gauge, 2/0 gauge, and other various wire

82
Saw blade, cutting wheels, 3M sanding heads
Diablo 12" Saw blade, 9in, 7in, 4 1/2 misc cutting/grinding wheels, 3M sanding heads. And of course Saftey glasses.

83
Ingersoll Rand Pneumatic tools
Ratchet, 2 impacts, chisel, grinders and air tool oil

84
3 Lincoln power luber
2, 12volt Lincoln Battery operated grease guns, 1, 18volt Lincoln grease gun. With charging stations and 5 extra batteries.

85
Engine Hoist and Engine stand
3 ton Engine Hoist and Engine stand only.

86
Battery charger Heavy Duty
Associated Heavy duty battery charger, 280AMP, 12V. Model 6006. With extra battery terminals with misc connectors.

87
Ingersoll Rand Battery power tools
Ingersoll Rand Battery power tools. 1, 20V Lithium Ion IQ Series 1/2 drive impact w/charging station. 1, 20V Lithium Ion Cordless Drill/Driver w/charging station and 1 extra battery.

88
Snap-On impact Gun, snap-on impact sockets
Snap-On 1/2 pneumatic impact Gun, all 22 snap-on impact sockets. 7/16 up to 1-1/2in

89
Pneumatic tools
Mac impact, Central Pneumatic ratchet, new Paramount Pneumatic angle head drill, unknown ratchet, sander, grinder and drill

90
Propane torches, propane, butane lighter/butane
Some bottles of propane are unused. Turboskill turbotorch and Bernzomatic TS4000 torches

91
Ingersoll Rand Cordless tools
2- 1/2 in. IQV 192 drill/drivers 1- 1/2in. IQV144 ratchet wrench 1-spare battery And charger

92
Snap-On Sockets, Rethreader Taps, Extensions
1 Mac Wrench and 1 OTC Thread Cleaner tool. Rest are Snap On snapon

93
Automotive air hose and hose clamps
Lot of various sized clamps and brass fittings and various sized air line.

94
SK sockets and proto tools
SK tools Impact sockets, regular sockets, Metrics and standard. 2 1/2in drive SK 17in long brakes bars. 1 SK Rachet 1/2 drive 15in long. And 1 proto 1/2 drive 10in long rachet. Multiple 3/8 extensions different lengths.

95
Hardware lot
Various types of screws, washers, bolts, nuts, nails, lock washers, lag screws and more Includes storage bins.

96
Snap-On 1/2 inch Ratchet and Sockets
Snap on 1-3/16 to 1-1/2 inch 1/2 Drive Sockets and Snapon SL715 Ratchet

97
4 Crescent Wrenches
4in Cresent, 6in Cresent SK, 10in Cresent, 12in Cresent. All made in the USA.

98
11 Misc open end adjustable wrenches
1, 15in wrench. 2, 12in wrenches. 2, 10in wrenches. 5, 8in wrenches, and 1, 6in wrench.

99
Automotive bearing puller, Proto slide Hammer
Proto slide hammer, bearing puller with musc fittings l, steering wheel puller, pilot bearing puller.


101
Pliers, wire cutters, and more
Numerous sets of pliers, wire cutters, needlenose, seal removers, retaining clamp and snap ring tools


103
Ratcheting Wrenches
Craftsman, Armstrong, Proto, Gear Wrench


105
Dewalt Saw and Drill. Extra Blades
Corded Saw, Cordless Drill with 3 Batteries. Milwaukee Blades

106
Welding Vise grips
8 different pair.

107
Mac Gear Separator and Lisle Camshaft Tool
Mac Gear and Bearing Separator PB900B and Lisle 18000 Camshaft Bearing Tool

108
2 wooden picnic tables
Octagon table with benches Table is 56 in. Diameter x 30 in. H Benches are 18 in. H Rectangular table is 8 ft. L x 5 ft. W. Top is 29.5 in. W


110
Misc Hammer Lot
Multiple different use hammers, welding chipper hammer, 2 hachets, rubber mallet, dead blow hammer, 12 ball peen hammers, 8 carpenter hammers.

111
Misc tractor parts, hydraulic valves
JD1600 Rim W41328P25J. 3 hydraulic valves, 3000PSI Nortrac arm 16in long stroke, 1in pins, 2in Bore. 1 misc hydraulic arm 31 1/2 stroke, 41 in overall. Barn cleaner corner wheel, cattle prod.

112
Misc auto parts, misc electrical hardware
Misc auto parts, misc electrical hardware, wire nuts, wire ends, misc new spark plugs, (4) 12in wiper blades. Terminal, terminal nipples, auto light bulb, electrical tape.

113

114
Creepers, shop lights, air hose, used oil catch
3 Creepers, 2 shop lights, (6) 4ft shop light bulbs, (8) 8ft shop light bulbs, 50ft shop air hose with reel, used oil drain container, 2 fluid funnels.

115
2 Torque rachets
(1) SK 13in 3/8 drive torque rachet, (1) 18in 1/2 drive torque rachet. W/case.

116
Large Screwdriver Lot
Stanley, Milwaukee, others

117
Axle Bearing Sockets and oil filter wrenches
Various sized 3/4 in. Sockets by APS and other various manufacturers from 2 3/32- 4 7/8. 5 different oil filter wrenches


119
1/2 inch sockets
Craftsman and other various manufacturers. Over 75 sockets.

120
1/2 inch Drives, extensions and speed ratchets
Craftman and other various manufacturers. 9 ratchets, 2 braker bars, 2 speed ratchets and several extensions.

121
1/4 and 1/2 sockets and drivers and more
Craftsman and various other manufacturers. Over 50 pieces!

122
SK 3/4 INCH Driver, extensions, sockets and other
SK driver, 2, extensions and 3 sockets. Plus unknown driver, 5 sockets and reducer


124
Multiple meters, test light, timing gun
Multiple meters, test light, KAL timing gun model L-10. Term a nut wire connectors, battery tester, engine vacuum fuel pressure gauge, micranta power module, curcut tester.



127
24in Expert Charchol Grill
24in Expert Charchol Grill, with 24lbs of charcoal. 42in in height, 44in overall width. Missing 1 burner grate.

128
Misc tool lot
Misc tool lot, wood saw, files, putty knife, KD tool wedge, torch tips, choke, etc. W/table

129
Retriever dog house
Retriever dog house with ground tie down. 44in wide, 31in depth, 34in in height. With hinged lid.

130
Kitchen Aid Charchol Grill
Kitchen aid Charchol Grill, with Charchol lighter and Charchol lighter fluid. 60 in overall width, 30in grill width, 51in height with smoke stack, 29in depth.
Gallery Images Loading, Please Wait...
  • Home
  • Advertise Your Estate Sale for $39
  • Hire an Estate Sale Company
  • Add Your Estate Sale Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Chuck Milks Retirement Online Auction
 Online Only Auction
Sale Date(s)
Bidding Starts: Tuesday Apr 9
Bidding Ends: Thursday Apr 11
Sale Location

Little Valley, NY 14755
Company
Mike Peterson Auction and Realty Service

Contact: Mike Peterson
Phone: 716-665-0668
Email: peteauction@hotmail.com
Website: petersonauction.com

Listing Terms and Conditions
Online Only Auction All items sold to the highest bidder without reserve 10% Buyer's Premium All Items sold "AS IS WHERE IS" with no warrantee on condition or authenticity PAYMENT ACCEPTED: Cash, Certified Funds, Master Card, Visa, Discover, Debit Card, American Express with additional 3.5% BP Complete Auction Terms on bidding web page
Chuck Milks Retirement Online Auction

Bidding Opens: Tuesday, April 9th @ 9AM

Preview: Wednesday, April 10th 4PM-6PM

Bidding Begins to Close: Thursday, April 11th @ 6PM

Pick-Up: Friday, April 12th 12PM-6PM

Visit our website to register and bid PetersonAuction.com

Auciton Includes:

1
Case International 885
Hours: 3433.6 HP: 84 Engine / Fuel: 4.4 cylinder Diesel 4wd/2wd: 2wd Transmission: 16 speed Attachments, Notes: Case 2250 Mount-O- Matic 6 ft. bucket and rear wheel weights 3 point hitch and 540 PTO

2
Toyota Forklift
Model: 42-6FGCU15 Serial#: 64366 Hours: 33,202 Approximate weight: 6200 lbs Max lift capacity: 3000 lbs Tilt and Side Shift 42 inch Forks With owners manual

3
2016 Polaris Sportsman 450 H.D. EFI
S/N: 4XASEE457GA585264 Hours: 132 hrs/564 miles Title: NY Transferable registered Engine / Fuel: 450 gas Transmission: 4 WD Has front winch (but not wired in), gun holders, trickle charger, and a Cabela's storage/ rear seat

4
Kubota ZD 331LP
S/N: 17334 Hours: 1075.2 Engine/Fuel: Kubota 3 cylinder Diesel Transmission: Hydrostatic Mower Deck: 72 in. Comes with extra fuel, transmission and oil filters.

5
Pull-Behind Tigercat Generator
4 cylinder Gasoline engine, 3-phase, 240 V pull-behind. Overall Dimensions are 105 in. L x 64 in. W x 74 in. H Starts/Runs but do not know if it generates power.

6
Karcher HDS 4.0/20 Professional Pressure Washer
220 volt Has reservoir for chemicals and heat adjustment for water temperature

7
Kubota ZD18F
S/N: 41112 Hours: 618 Engine/Fuel: Kubota 3 Cylinder Diesel Transmission: Hydrostatic Mower Deck: 58 inch Comes with fuel and oil filter

8
Viking Thermal Arc 250GM Welder
Comes with Miller Spoolmate and SGA100 Adapter

9
Lincoln IdealArc 250 Welder
220 volt Comes with extra clamp and welding sticks

10
Hypertherm Powermax 1000 Plasma Arc Welder
220 volt G3 series Number 083169 Serial # 083169 Comes with helmet and some extras Cart not included!

11
900 Gallon Diesel Fuel Tank
128 inches long by 48 inches across. Has platform on Front of Skids. Had Non Highway Diesel in it. Gas Boy Pump is wired 110V AC with 3 Prong Plug. Does turn on. You have one week from purchase to remove this tank.

12
300 Gallon Gasoline Tank
Fill-Rite FR701V Pump 62 inches long by 32inches wide

13
Bush Hog RTH80 Rototiller
Serial#: 12-10652 80 inches wide

14
900 Gallon Diesel Tank
Gas Boy 110V AC Pump. 128 inches long by 48 inches wide. Was filled with Highway Diesel Fuel. You have one week to remove from close of auction.

15
International Harvester F M
S/N: FBK106130 HP: 38 hp Engine / Fuel: 4 cylinder gas 4wd/2wd: 2wd Attachments, Notes: Has rear wheel weights. 540 PTO Comes with wide front end.

16
3 point hitch post hole digger
Comes with 12 in. auger

17
Kalamazoo Metal Bandsaw
24 inch Throat. Extra Morse Blades. 220V single phase

18
DS Stoves Wood Stove
Kozy King model# 300-09/400-09 Serial# 000707 Mfg date 8/14 Has electric blower motor. Stove dimensions are 23 in. W x 60 in. D x 84 in. H Comes with Chimney sweeping heads.

19
Ingersoll Rand T30 2 stage air compressor
230 volt single phase 7.5 hp. Model # 2475N75 Serial# 30TC876876 Reserve air tank behind is not included.

19
Air reserve tank on rolling cart
Approximately 200 gallon reserve tank Approximately 71 in. L x 28 in. Diameter Stands approximately 90 in. H with cart Air compressor Not included!

20
International 550 Manure spreader
International 550 Manure spreader, converted to a wood wagon. No PTO or Manure kicker. Pull behind. 92in width, 209in overall length.

21
International 550 Manure Spreader
Used as a pull behind wood wagon. No PTO connection or manure kicker. Tires are bald. Overall dimensions are 209 in. L x 92 in. W

22
New Holland 185 Manure spreader
New Holland 185 Manure spreader, missing the Manure kicker, used as a wood wagon. 265in length, 95 1/2 width.

23
International Case 550 Manure Spreader
Used as a pull behind wood wagon. Has no PTO or manure kicker Overall dimensions are 223 in. L x 95 in. W

24
Trailer
Metal frame with a wooden bed. Bed dimensions are 170 in. L x 73.5 in. W Overall dimensions are 220 in. L x 89.25 in. W Has a drop down gate that is 48 in. L Has NO title

25
Farmland gate
Approximately 165.25 in. W x 49 in. H

26
3 point hitch Box blade
Overall dimensions are 97.5 in. W x 24.25 in. L

27
Wooden Hay Wagon
Central Tractor Running Gear 8ft wide x 15-1/2ft Long. We will get it pulled to the driveway. Will need tires.

28

29

30
Husqvarna 650RTT Rototiller
6.5 HP Briggs & Stratton engine.

31

32

33

34
Craftsman Edger and Agri-Fab Broadcast Spreader
Edger is 3.8 HP Model# 536.772210 Braodcaster Model # 45-02114

35
New Cub Cadet 4 ft. Aerator
Pull behind Serial# 08007105

36

37
2 Portable water hose reels with hoses
Larger 4 wheel cart has 2 hoses connected to make 1. Approximately 50 ft. of hose on it.

38
Cub Cadet kid's tricycle and pull behind wagon
Wagon bed is 48 in. L x 23 in. W x 2.5 in. H (tires need air)

39

40
Portable Garden Hose reel with hose and cart
4 wheel reel (wheels need air) has approximately 100 ft hose. Ground work cart bed approximately 4ft. L x 2 ft. W x 10 in. D

41
International Rolling Tool cart and floor jack
Cart is 27.25 in. W x 19 in. D x 32.75 in. H Overall width with side up is 56.25 in.

42
Ridgid 300 Pipe Cutter/ Threader
Comes on a steel rolling cart Overall approximate dimensions are 40 in. L x 20.5 in. W x 52 in. H Serial# 7540024

43
2 Metal Rolling Shelves
Approximate dimensions of both are 48 in. L x 18 in. W x 40 in. H

44

45

46
Over a Case of grease and some grease fittings
You are getting 54 tubes of grease.

47
2 Forklift chargers
Clarke Model# 40514A 120v/15A Power Cat Model# 18790-74 120v/ 10.5A Unsure if work- nothing to test on.

48

49

50
2 pieces 8 in. Pipe
1 piece is 101.5 in. L The other is 126 in. L (has 1/4 in. Walls.

51
18 C Clamps
18 C Clamps total, sizes ranging from 3in up to 12in. Jorgensen clamp, ductile iron clamps, Armstrong, deep throat clamps.

52
Signode Bander
Signode Bander cart with 4 spools of banding. Crimper and cutter included. 26in banding wheel.

53
Pacific Trash Pump
Pacific trash pump, 3in hard suction hose, with 25ft discharge hose, 2 strainers, LCT 208 series engine. Serial# PTPK03185

54
32ft aluminum extension ladder
32ft aluminum extension ladder

55
2 pairs of Rigid bolt cutters
2 pairs of Rigid bolt cutters, 1 pair is 36in, and the other is 24in.

56
Bolt cutters and tire irons
3 pairs of bolt cutters, 2 18in cutters and 1 36in paid. 3 Tire irons, 2 are 36in and 1 is 24in.

57
Misc lights and semi truck parts
Misc semi tail lights, amber and red lens covers, and semi truck parts, truck mirrors, convex mirrors, lug nut caps for semis.

58
16 step aluminum stair case
16ft aluminum stair case.

59
Misc Angle Iron
1, 98in angle iron 3in wide. 2, 106in 4in wide angle iron. 1, 241in angle iron 1in wide, 200in piece of heavy iron 4in wide, 41in heavy iron plate steel with rounded edges. 1 sheet of plate steel 69in � 48in � 1/8in thick.

60
Plywood and saw horses
2 sheets of 8�4 1/4in plywood, 1 sheet of 8�4 1/2in, 5 saw horses, 6 pieces of misc boards treated and not treated, 8ft 10ft and 12ft various sizes. (Contents of saw horses and plywood not included).

61
11 pieces gas black and 2 pieces galvanized
Black pipe is 10 ft. L x 1in. D each Galvanized is 21 ft. L x 1 in. D each And 1 piece of Rebar also included.

62
50 ton Shop press
Hand hydraulic press 43 in. L x 13 in. W x 65.5 in. H

63

64
1/2 in. Drive Impact sockets
Craftsman 3/8-11/6 in. (15/16 socket missing) Sunex socket set (30, 32, 34, 36mm) And unknown brand sockets

65
20 8�8�3 Glass Blocks
20 8�8�3 Glass Blocks wave design.

66
SK socket sets 1/4 Drive 3/8 Drive
SK socket sets 1/4 Drive 3/8 Drive. Both are complete sets.

67
Craftsman socket sets and impact sockets
Craftsman socket set 1/2 drive and 1/4 drive, missing 3/8 rachet and a few othe sockets and screw bits. Craftsman 12 piece 1/4 drive set complete. Craftsman impact sockets,12mm to 27mm.

68
2 Palmgren Vises
Bases are 10.75 in. L x 9.5 in. W Jaws are 6 in.

69
Tap set, Allen Hex Key Set, snap ring pliers
SAE Tap set and rethreading dies, Cummins pro allen Hex Key Set, OTC stinger snap ring pliers set.

70
Craftsman 6 x 9 in. Belt and Disc Sander
Model # 351.217570 Approximately 31 in. L x 22 in. W x 16 in. H

71
7 Bottle Jacks, 2 utility trailer jacks
7 Bottle Jacks, 1, 20ton bottle jack. 2, 10ton bottle jacks. 3, 2 ton bottle jacks, 2 misc utility trailer jacks. 1 tire iron, 4 bottle jack bars.

72
Hand tools
Push brooms, shovels, sledge hammers, mop bucket

73
Pry bars
Various pry bars and crows. Largest is 68 in. L

74
Misc open end wrenches
Misc open end wrenches Standard and Metric, Armstrong, Cummins, craftsman, taiwan, etc.

75
Oil pumps/canisters and grease guns
Pneumatic oil pump and grease gun and 2 hand pumps and manual grease gun

76
Proto tool open end and ratcheting wrenches
Proto tool open end metric and standard wrenches and standard ratcheting wrenches.

77
Packard Heavy Duty Drill Press
Bench top drill press on homemade stand. 110 volt. 3/4 hp. Model# 918 Serial# 20176 Base is 34 in. X 34 in. Height is 67.5 in.

78
Misc Power tool lot
Misc power tool lot, Rockwell 1/2in drill model 7553, AEG drill SB2E 16 RL, 1/2in eletric drill no name, Makita 180mm Polisher model# 9218PB, Metabo wheel grinder model# W8-115, Black and Decker saw cat saw.

79

80
Milwaukee power tool lot
Milwaukee power tools, Curcular Saw 7 1/4 in w/case, Hand Grinder 4 1/2in, jig saw, 3/8 10mm reversing drill.

81
Wire lot
1/0 gauge, 2/0 gauge, and other various wire

82
Saw blade, cutting wheels, 3M sanding heads
Diablo 12" Saw blade, 9in, 7in, 4 1/2 misc cutting/grinding wheels, 3M sanding heads. And of course Saftey glasses.

83
Ingersoll Rand Pneumatic tools
Ratchet, 2 impacts, chisel, grinders and air tool oil

84
3 Lincoln power luber
2, 12volt Lincoln Battery operated grease guns, 1, 18volt Lincoln grease gun. With charging stations and 5 extra batteries.

85
Engine Hoist and Engine stand
3 ton Engine Hoist and Engine stand only.

86
Battery charger Heavy Duty
Associated Heavy duty battery charger, 280AMP, 12V. Model 6006. With extra battery terminals with misc connectors.

87
Ingersoll Rand Battery power tools
Ingersoll Rand Battery power tools. 1, 20V Lithium Ion IQ Series 1/2 drive impact w/charging station. 1, 20V Lithium Ion Cordless Drill/Driver w/charging station and 1 extra battery.

88
Snap-On impact Gun, snap-on impact sockets
Snap-On 1/2 pneumatic impact Gun, all 22 snap-on impact sockets. 7/16 up to 1-1/2in

89
Pneumatic tools
Mac impact, Central Pneumatic ratchet, new Paramount Pneumatic angle head drill, unknown ratchet, sander, grinder and drill

90
Propane torches, propane, butane lighter/butane
Some bottles of propane are unused. Turboskill turbotorch and Bernzomatic TS4000 torches

91
Ingersoll Rand Cordless tools
2- 1/2 in. IQV 192 drill/drivers 1- 1/2in. IQV144 ratchet wrench 1-spare battery And charger

92
Snap-On Sockets, Rethreader Taps, Extensions
1 Mac Wrench and 1 OTC Thread Cleaner tool. Rest are Snap On snapon

93
Automotive air hose and hose clamps
Lot of various sized clamps and brass fittings and various sized air line.

94
SK sockets and proto tools
SK tools Impact sockets, regular sockets, Metrics and standard. 2 1/2in drive SK 17in long brakes bars. 1 SK Rachet 1/2 drive 15in long. And 1 proto 1/2 drive 10in long rachet. Multiple 3/8 extensions different lengths.

95
Hardware lot
Various types of screws, washers, bolts, nuts, nails, lock washers, lag screws and more Includes storage bins.

96
Snap-On 1/2 inch Ratchet and Sockets
Snap on 1-3/16 to 1-1/2 inch 1/2 Drive Sockets and Snapon SL715 Ratchet

97
4 Crescent Wrenches
4in Cresent, 6in Cresent SK, 10in Cresent, 12in Cresent. All made in the USA.

98
11 Misc open end adjustable wrenches
1, 15in wrench. 2, 12in wrenches. 2, 10in wrenches. 5, 8in wrenches, and 1, 6in wrench.

99
Automotive bearing puller, Proto slide Hammer
Proto slide hammer, bearing puller with musc fittings l, steering wheel puller, pilot bearing puller.

100

101
Pliers, wire cutters, and more
Numerous sets of pliers, wire cutters, needlenose, seal removers, retaining clamp and snap ring tools

102

103
Ratcheting Wrenches
Craftsman, Armstrong, Proto, Gear Wrench

104

105
Dewalt Saw and Drill. Extra Blades
Corded Saw, Cordless Drill with 3 Batteries. Milwaukee Blades

106
Welding Vise grips
8 different pair.

107
Mac Gear Separator and Lisle Camshaft Tool
Mac Gear and Bearing Separator PB900B and Lisle 18000 Camshaft Bearing Tool

108
2 wooden picnic tables
Octagon table with benches Table is 56 in. Diameter x 30 in. H Benches are 18 in. H Rectangular table is 8 ft. L x 5 ft. W. Top is 29.5 in. W

109

110
Misc Hammer Lot
Multiple different use hammers, welding chipper hammer, 2 hachets, rubber mallet, dead blow hammer, 12 ball peen hammers, 8 carpenter hammers.

111
Misc tractor parts, hydraulic valves
JD1600 Rim W41328P25J. 3 hydraulic valves, 3000PSI Nortrac arm 16in long stroke, 1in pins, 2in Bore. 1 misc hydraulic arm 31 1/2 stroke, 41 in overall. Barn cleaner corner wheel, cattle prod.

112
Misc auto parts, misc electrical hardware
Misc auto parts, misc electrical hardware, wire nuts, wire ends, misc new spark plugs, (4) 12in wiper blades. Terminal, terminal nipples, auto light bulb, electrical tape.

113

114
Creepers, shop lights, air hose, used oil catch
3 Creepers, 2 shop lights, (6) 4ft shop light bulbs, (8) 8ft shop light bulbs, 50ft shop air hose with reel, used oil drain container, 2 fluid funnels.

115
2 Torque rachets
(1) SK 13in 3/8 drive torque rachet, (1) 18in 1/2 drive torque rachet. W/case.

116
Large Screwdriver Lot
Stanley, Milwaukee, others

117
Axle Bearing Sockets and oil filter wrenches
Various sized 3/4 in. Sockets by APS and other various manufacturers from 2 3/32- 4 7/8. 5 different oil filter wrenches

118

119
1/2 inch sockets
Craftsman and other various manufacturers. Over 75 sockets.

120
1/2 inch Drives, extensions and speed ratchets
Craftman and other various manufacturers. 9 ratchets, 2 braker bars, 2 speed ratchets and several extensions.

121
1/4 and 1/2 sockets and drivers and more
Craftsman and various other manufacturers. Over 50 pieces!

122
SK 3/4 INCH Driver, extensions, sockets and other
SK driver, 2, extensions and 3 sockets. Plus unknown driver, 5 sockets and reducer

123

124
Multiple meters, test light, timing gun
Multiple meters, test light, KAL timing gun model L-10. Term a nut wire connectors, battery tester, engine vacuum fuel pressure gauge, micranta power module, curcut tester.

125

126

127
24in Expert Charchol Grill
24in Expert Charchol Grill, with 24lbs of charcoal. 42in in height, 44in overall width. Missing 1 burner grate.

128
Misc tool lot
Misc tool lot, wood saw, files, putty knife, KD tool wedge, torch tips, choke, etc. W/table

129
Retriever dog house
Retriever dog house with ground tie down. 44in wide, 31in depth, 34in in height. With hinged lid.

130
Kitchen Aid Charchol Grill
Kitchen aid Charchol Grill, with Charchol lighter and Charchol lighter fluid. 60 in overall width, 30in grill width, 51in height with smoke stack, 29in depth.